summaryrefslogtreecommitdiff
path: root/fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h
diff options
context:
space:
mode:
Diffstat (limited to 'fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h')
-rw-r--r--fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h296
1 files changed, 0 insertions, 296 deletions
diff --git a/fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h b/fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h
deleted file mode 100644
index fa58dd9..0000000
--- a/fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h
+++ /dev/null
@@ -1,296 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f0xx_hal_gpio.h
- * @author MCD Application Team
- * @brief Header file of GPIO HAL module.
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
- * All rights reserved.</center></h2>
- *
- * This software component is licensed by ST under BSD 3-Clause license,
- * the "License"; You may not use this file except in compliance with the
- * License. You may obtain a copy of the License at:
- * opensource.org/licenses/BSD-3-Clause
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F0xx_HAL_GPIO_H
-#define __STM32F0xx_HAL_GPIO_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f0xx_hal_def.h"
-
-/** @addtogroup STM32F0xx_HAL_Driver
- * @{
- */
-
-/** @addtogroup GPIO
- * @{
- */
-
-/* Exported types ------------------------------------------------------------*/
-
-/** @defgroup GPIO_Exported_Types GPIO Exported Types
- * @{
- */
-/**
- * @brief GPIO Init structure definition
- */
-typedef struct
-{
- uint32_t Pin; /*!< Specifies the GPIO pins to be configured.
- This parameter can be any value of @ref GPIO_pins */
-
- uint32_t Mode; /*!< Specifies the operating mode for the selected pins.
- This parameter can be a value of @ref GPIO_mode */
-
- uint32_t Pull; /*!< Specifies the Pull-up or Pull-Down activation for the selected pins.
- This parameter can be a value of @ref GPIO_pull */
-
- uint32_t Speed; /*!< Specifies the speed for the selected pins.
- This parameter can be a value of @ref GPIO_speed */
-
- uint32_t Alternate; /*!< Peripheral to be connected to the selected pins
- This parameter can be a value of @ref GPIOEx_Alternate_function_selection */
-}GPIO_InitTypeDef;
-
-/**
- * @brief GPIO Bit SET and Bit RESET enumeration
- */
-typedef enum
-{
- GPIO_PIN_RESET = 0U,
- GPIO_PIN_SET
-}GPIO_PinState;
-/**
- * @}
- */
-
-/* Exported constants --------------------------------------------------------*/
-/** @defgroup GPIO_Exported_Constants GPIO Exported Constants
- * @{
- */
-/** @defgroup GPIO_pins GPIO pins
- * @{
- */
-#define GPIO_PIN_0 ((uint16_t)0x0001U) /* Pin 0 selected */
-#define GPIO_PIN_1 ((uint16_t)0x0002U) /* Pin 1 selected */
-#define GPIO_PIN_2 ((uint16_t)0x0004U) /* Pin 2 selected */
-#define GPIO_PIN_3 ((uint16_t)0x0008U) /* Pin 3 selected */
-#define GPIO_PIN_4 ((uint16_t)0x0010U) /* Pin 4 selected */
-#define GPIO_PIN_5 ((uint16_t)0x0020U) /* Pin 5 selected */
-#define GPIO_PIN_6 ((uint16_t)0x0040U) /* Pin 6 selected */
-#define GPIO_PIN_7 ((uint16_t)0x0080U) /* Pin 7 selected */
-#define GPIO_PIN_8 ((uint16_t)0x0100U) /* Pin 8 selected */
-#define GPIO_PIN_9 ((uint16_t)0x0200U) /* Pin 9 selected */
-#define GPIO_PIN_10 ((uint16_t)0x0400U) /* Pin 10 selected */
-#define GPIO_PIN_11 ((uint16_t)0x0800U) /* Pin 11 selected */
-#define GPIO_PIN_12 ((uint16_t)0x1000U) /* Pin 12 selected */
-#define GPIO_PIN_13 ((uint16_t)0x2000U) /* Pin 13 selected */
-#define GPIO_PIN_14 ((uint16_t)0x4000U) /* Pin 14 selected */
-#define GPIO_PIN_15 ((uint16_t)0x8000U) /* Pin 15 selected */
-#define GPIO_PIN_All ((uint16_t)0xFFFFU) /* All pins selected */
-
-#define GPIO_PIN_MASK (0x0000FFFFU) /* PIN mask for assert test */
-/**
- * @}
- */
-
-/** @defgroup GPIO_mode GPIO mode
- * @brief GPIO Configuration Mode
- * Elements values convention: 0xX0yz00YZ
- * - X : GPIO mode or EXTI Mode
- * - y : External IT or Event trigger detection
- * - z : IO configuration on External IT or Event
- * - Y : Output type (Push Pull or Open Drain)
- * - Z : IO Direction mode (Input, Output, Alternate or Analog)
- * @{
- */
-#define GPIO_MODE_INPUT (0x00000000U) /*!< Input Floating Mode */
-#define GPIO_MODE_OUTPUT_PP (0x00000001U) /*!< Output Push Pull Mode */
-#define GPIO_MODE_OUTPUT_OD (0x00000011U) /*!< Output Open Drain Mode */
-#define GPIO_MODE_AF_PP (0x00000002U) /*!< Alternate Function Push Pull Mode */
-#define GPIO_MODE_AF_OD (0x00000012U) /*!< Alternate Function Open Drain Mode */
-#define GPIO_MODE_ANALOG (0x00000003U) /*!< Analog Mode */
-#define GPIO_MODE_IT_RISING (0x10110000U) /*!< External Interrupt Mode with Rising edge trigger detection */
-#define GPIO_MODE_IT_FALLING (0x10210000U) /*!< External Interrupt Mode with Falling edge trigger detection */
-#define GPIO_MODE_IT_RISING_FALLING (0x10310000U) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
-#define GPIO_MODE_EVT_RISING (0x10120000U) /*!< External Event Mode with Rising edge trigger detection */
-#define GPIO_MODE_EVT_FALLING (0x10220000U) /*!< External Event Mode with Falling edge trigger detection */
-#define GPIO_MODE_EVT_RISING_FALLING (0x10320000U) /*!< External Event Mode with Rising/Falling edge trigger detection */
-/**
- * @}
- */
-
-/** @defgroup GPIO_speed GPIO speed
- * @brief GPIO Output Maximum frequency
- * @{
- */
-#define GPIO_SPEED_FREQ_LOW (0x00000000U) /*!< range up to 2 MHz, please refer to the product datasheet */
-#define GPIO_SPEED_FREQ_MEDIUM (0x00000001U) /*!< range 4 MHz to 10 MHz, please refer to the product datasheet */
-#define GPIO_SPEED_FREQ_HIGH (0x00000003U) /*!< range 10 MHz to 50 MHz, please refer to the product datasheet */
-/**
- * @}
- */
-
- /** @defgroup GPIO_pull GPIO pull
- * @brief GPIO Pull-Up or Pull-Down Activation
- * @{
- */
-#define GPIO_NOPULL (0x00000000U) /*!< No Pull-up or Pull-down activation */
-#define GPIO_PULLUP (0x00000001U) /*!< Pull-up activation */
-#define GPIO_PULLDOWN (0x00000002U) /*!< Pull-down activation */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/* Exported macro ------------------------------------------------------------*/
-/** @defgroup GPIO_Exported_Macros GPIO Exported Macros
- * @{
- */
-
-/**
- * @brief Check whether the specified EXTI line flag is set or not.
- * @param __EXTI_LINE__ specifies the EXTI line flag to check.
- * This parameter can be GPIO_PIN_x where x can be(0..15)
- * @retval The new state of __EXTI_LINE__ (SET or RESET).
- */
-#define __HAL_GPIO_EXTI_GET_FLAG(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))
-
-/**
- * @brief Clear the EXTI's line pending flags.
- * @param __EXTI_LINE__ specifies the EXTI lines flags to clear.
- * This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
- * @retval None
- */
-#define __HAL_GPIO_EXTI_CLEAR_FLAG(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))
-
-/**
- * @brief Check whether the specified EXTI line is asserted or not.
- * @param __EXTI_LINE__ specifies the EXTI line to check.
- * This parameter can be GPIO_PIN_x where x can be(0..15)
- * @retval The new state of __EXTI_LINE__ (SET or RESET).
- */
-#define __HAL_GPIO_EXTI_GET_IT(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))
-
-/**
- * @brief Clear the EXTI's line pending bits.
- * @param __EXTI_LINE__ specifies the EXTI lines to clear.
- * This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
- * @retval None
- */
-#define __HAL_GPIO_EXTI_CLEAR_IT(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))
-
-/**
- * @brief Generate a Software interrupt on selected EXTI line.
- * @param __EXTI_LINE__ specifies the EXTI line to check.
- * This parameter can be GPIO_PIN_x where x can be(0..15)
- * @retval None
- */
-#define __HAL_GPIO_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER |= (__EXTI_LINE__))
-
-/**
- * @}
- */
-
-/* Private macros ------------------------------------------------------------*/
-/** @addtogroup GPIO_Private_Macros GPIO Private Macros
- * @{
- */
-#define IS_GPIO_PIN_ACTION(ACTION) (((ACTION) == GPIO_PIN_RESET) || ((ACTION) == GPIO_PIN_SET))
-
-#define IS_GPIO_PIN(__PIN__) (((((uint32_t)__PIN__) & GPIO_PIN_MASK) != 0x00U) &&\
- ((((uint32_t)__PIN__) & ~GPIO_PIN_MASK) == 0x00U))
-
-#define IS_GPIO_MODE(__MODE__) (((__MODE__) == GPIO_MODE_INPUT) ||\
- ((__MODE__) == GPIO_MODE_OUTPUT_PP) ||\
- ((__MODE__) == GPIO_MODE_OUTPUT_OD) ||\
- ((__MODE__) == GPIO_MODE_AF_PP) ||\
- ((__MODE__) == GPIO_MODE_AF_OD) ||\
- ((__MODE__) == GPIO_MODE_IT_RISING) ||\
- ((__MODE__) == GPIO_MODE_IT_FALLING) ||\
- ((__MODE__) == GPIO_MODE_IT_RISING_FALLING) ||\
- ((__MODE__) == GPIO_MODE_EVT_RISING) ||\
- ((__MODE__) == GPIO_MODE_EVT_FALLING) ||\
- ((__MODE__) == GPIO_MODE_EVT_RISING_FALLING) ||\
- ((__MODE__) == GPIO_MODE_ANALOG))
-
-#define IS_GPIO_SPEED(__SPEED__) (((__SPEED__) == GPIO_SPEED_FREQ_LOW) ||\
- ((__SPEED__) == GPIO_SPEED_FREQ_MEDIUM) ||\
- ((__SPEED__) == GPIO_SPEED_FREQ_HIGH))
-
-#define IS_GPIO_PULL(__PULL__) (((__PULL__) == GPIO_NOPULL) ||\
- ((__PULL__) == GPIO_PULLUP) || \
- ((__PULL__) == GPIO_PULLDOWN))
-/**
- * @}
- */
-
-/* Include GPIO HAL Extended module */
-#include "stm32f0xx_hal_gpio_ex.h"
-
-/* Exported functions --------------------------------------------------------*/
-/** @addtogroup GPIO_Exported_Functions GPIO Exported Functions
- * @{
- */
-
-/** @addtogroup GPIO_Exported_Functions_Group1 Initialization/de-initialization functions
- * @brief Initialization and Configuration functions
- * @{
- */
-
-/* Initialization and de-initialization functions *****************************/
-void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init);
-void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin);
-
-/**
- * @}
- */
-
-/** @addtogroup GPIO_Exported_Functions_Group2 IO operation functions
- * @{
- */
-
-/* IO operation functions *****************************************************/
-GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
-void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState);
-void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
-HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
-void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin);
-void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin);
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F0xx_HAL_GPIO_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
generated by cgit (git 2.34.1) at 2024-05-17 06:34:52 +0000