summaryrefslogtreecommitdiff
path: root/fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_conf_template.h
diff options
context:
space:
mode:
Diffstat (limited to 'fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_conf_template.h')
-rw-r--r--fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_conf_template.h321
1 files changed, 0 insertions, 321 deletions
diff --git a/fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_conf_template.h b/fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_conf_template.h
deleted file mode 100644
index f1b1648..0000000
--- a/fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_conf_template.h
+++ /dev/null
@@ -1,321 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f0xx_hal_conf.h
- * @author MCD Application Team
- * @brief HAL configuration file.
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
- * All rights reserved.</center></h2>
- *
- * This software component is licensed by ST under BSD 3-Clause license,
- * the "License"; You may not use this file except in compliance with the
- * License. You may obtain a copy of the License at:
- * opensource.org/licenses/BSD-3-Clause
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F0xx_HAL_CONF_H
-#define __STM32F0xx_HAL_CONF_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-
-/* ########################## Module Selection ############################## */
-/**
- * @brief This is the list of modules to be used in the HAL driver
- */
-#define HAL_MODULE_ENABLED
-#define HAL_ADC_MODULE_ENABLED
-#define HAL_CAN_MODULE_ENABLED
-#define HAL_CEC_MODULE_ENABLED
-#define HAL_COMP_MODULE_ENABLED
-#define HAL_CORTEX_MODULE_ENABLED
-#define HAL_CRC_MODULE_ENABLED
-#define HAL_DAC_MODULE_ENABLED
-#define HAL_DMA_MODULE_ENABLED
-#define HAL_FLASH_MODULE_ENABLED
-#define HAL_GPIO_MODULE_ENABLED
-#define HAL_EXTI_MODULE_ENABLED
-#define HAL_I2C_MODULE_ENABLED
-#define HAL_I2S_MODULE_ENABLED
-#define HAL_IRDA_MODULE_ENABLED
-#define HAL_IWDG_MODULE_ENABLED
-#define HAL_PCD_MODULE_ENABLED
-#define HAL_PWR_MODULE_ENABLED
-#define HAL_RCC_MODULE_ENABLED
-#define HAL_RTC_MODULE_ENABLED
-#define HAL_SMARTCARD_MODULE_ENABLED
-#define HAL_SMBUS_MODULE_ENABLED
-#define HAL_SPI_MODULE_ENABLED
-#define HAL_TIM_MODULE_ENABLED
-#define HAL_TSC_MODULE_ENABLED
-#define HAL_UART_MODULE_ENABLED
-#define HAL_USART_MODULE_ENABLED
-#define HAL_WWDG_MODULE_ENABLED
-
-/* ######################### Oscillator Values adaptation ################### */
-/**
- * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
- * This value is used by the RCC HAL module to compute the system frequency
- * (when HSE is used as system clock source, directly or through the PLL).
- */
-#if !defined (HSE_VALUE)
- #define HSE_VALUE 8000000U /*!< Value of the External oscillator in Hz */
-#endif /* HSE_VALUE */
-
-/**
- * @brief In the following line adjust the External High Speed oscillator (HSE) Startup
- * Timeout value
- */
-#if !defined (HSE_STARTUP_TIMEOUT)
- #define HSE_STARTUP_TIMEOUT 100U /*!< Time out for HSE start up, in ms */
-#endif /* HSE_STARTUP_TIMEOUT */
-
-/**
- * @brief Internal High Speed oscillator (HSI) value.
- * This value is used by the RCC HAL module to compute the system frequency
- * (when HSI is used as system clock source, directly or through the PLL).
- */
-#if !defined (HSI_VALUE)
- #define HSI_VALUE 8000000U /*!< Value of the Internal oscillator in Hz*/
-#endif /* HSI_VALUE */
-
-/**
- * @brief In the following line adjust the Internal High Speed oscillator (HSI) Startup
- * Timeout value
- */
-#if !defined (HSI_STARTUP_TIMEOUT)
- #define HSI_STARTUP_TIMEOUT 5000U /*!< Time out for HSI start up */
-#endif /* HSI_STARTUP_TIMEOUT */
-
-/**
- * @brief Internal High Speed oscillator for ADC (HSI14) value.
- */
-#if !defined (HSI14_VALUE)
- #define HSI14_VALUE 14000000U /*!< Value of the Internal High Speed oscillator for ADC in Hz.
- The real value may vary depending on the variations
- in voltage and temperature. */
-#endif /* HSI14_VALUE */
-
-/**
- * @brief Internal High Speed oscillator for USB (HSI48) value.
- */
-#if !defined (HSI48_VALUE)
- #define HSI48_VALUE 48000000U /*!< Value of the Internal High Speed oscillator for USB in Hz.
- The real value may vary depending on the variations
- in voltage and temperature. */
-#endif /* HSI48_VALUE */
-
-/**
- * @brief Internal Low Speed oscillator (LSI) value.
- */
-#if !defined (LSI_VALUE)
- #define LSI_VALUE 32000U
-#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
- The real value may vary depending on the variations
- in voltage and temperature. */
-/**
- * @brief External Low Speed oscillator (LSE) value.
- */
-#if !defined (LSE_VALUE)
- #define LSE_VALUE 32768U /*!< Value of the External Low Speed oscillator in Hz */
-#endif /* LSE_VALUE */
-
-/**
- * @brief Time out for LSE start up value in ms.
- */
-#if !defined (LSE_STARTUP_TIMEOUT)
- #define LSE_STARTUP_TIMEOUT 5000U /*!< Time out for LSE start up, in ms */
-#endif /* LSE_STARTUP_TIMEOUT */
-
-
-/* Tip: To avoid modifying this file each time you need to use different HSE,
- === you can define the HSE value in your toolchain compiler preprocessor. */
-
-/* ########################### System Configuration ######################### */
-/**
- * @brief This is the HAL system configuration section
- */
-#define VDD_VALUE 3300U /*!< Value of VDD in mv */
-#define TICK_INT_PRIORITY ((uint32_t)(1U<<__NVIC_PRIO_BITS) - 1U) /*!< tick interrupt priority (lowest by default) */
- /* Warning: Must be set to higher priority for HAL_Delay() */
- /* and HAL_GetTick() usage under interrupt context */
-#define USE_RTOS 0U
-#define PREFETCH_ENABLE 1U
-#define INSTRUCTION_CACHE_ENABLE 0U
-#define DATA_CACHE_ENABLE 0U
-#define USE_SPI_CRC 1U
-
-#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */
-#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */
-#define USE_HAL_COMP_REGISTER_CALLBACKS 0U /* COMP register callback disabled */
-#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */
-#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */
-#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */
-#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */
-#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */
-#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */
-#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */
-#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */
-#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */
-#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */
-#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */
-#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */
-#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */
-#define USE_HAL_TSC_REGISTER_CALLBACKS 0U /* TSC register callback disabled */
-#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */
-
-/* ########################## Assert Selection ############################## */
-/**
- * @brief Uncomment the line below to expanse the "assert_param" macro in the
- * HAL drivers code
- */
-/*#define USE_FULL_ASSERT 1*/
-
-/* Includes ------------------------------------------------------------------*/
-/**
- * @brief Include module's header file
- */
-
-#ifdef HAL_RCC_MODULE_ENABLED
- #include "stm32f0xx_hal_rcc.h"
-#endif /* HAL_RCC_MODULE_ENABLED */
-
-#ifdef HAL_GPIO_MODULE_ENABLED
- #include "stm32f0xx_hal_gpio.h"
-#endif /* HAL_GPIO_MODULE_ENABLED */
-
-#ifdef HAL_EXTI_MODULE_ENABLED
- #include "stm32f0xx_hal_exti.h"
-#endif /* HAL_EXTI_MODULE_ENABLED */
-
-#ifdef HAL_DMA_MODULE_ENABLED
- #include "stm32f0xx_hal_dma.h"
-#endif /* HAL_DMA_MODULE_ENABLED */
-
-#ifdef HAL_CORTEX_MODULE_ENABLED
- #include "stm32f0xx_hal_cortex.h"
-#endif /* HAL_CORTEX_MODULE_ENABLED */
-
-#ifdef HAL_ADC_MODULE_ENABLED
- #include "stm32f0xx_hal_adc.h"
-#endif /* HAL_ADC_MODULE_ENABLED */
-
-#ifdef HAL_CAN_MODULE_ENABLED
- #include "stm32f0xx_hal_can.h"
-#endif /* HAL_CAN_MODULE_ENABLED */
-
-#ifdef HAL_CEC_MODULE_ENABLED
- #include "stm32f0xx_hal_cec.h"
-#endif /* HAL_CEC_MODULE_ENABLED */
-
-#ifdef HAL_COMP_MODULE_ENABLED
- #include "stm32f0xx_hal_comp.h"
-#endif /* HAL_COMP_MODULE_ENABLED */
-
-#ifdef HAL_CRC_MODULE_ENABLED
- #include "stm32f0xx_hal_crc.h"
-#endif /* HAL_CRC_MODULE_ENABLED */
-
-#ifdef HAL_DAC_MODULE_ENABLED
- #include "stm32f0xx_hal_dac.h"
-#endif /* HAL_DAC_MODULE_ENABLED */
-
-#ifdef HAL_FLASH_MODULE_ENABLED
- #include "stm32f0xx_hal_flash.h"
-#endif /* HAL_FLASH_MODULE_ENABLED */
-
-#ifdef HAL_I2C_MODULE_ENABLED
- #include "stm32f0xx_hal_i2c.h"
-#endif /* HAL_I2C_MODULE_ENABLED */
-
-#ifdef HAL_I2S_MODULE_ENABLED
- #include "stm32f0xx_hal_i2s.h"
-#endif /* HAL_I2S_MODULE_ENABLED */
-
-#ifdef HAL_IRDA_MODULE_ENABLED
- #include "stm32f0xx_hal_irda.h"
-#endif /* HAL_IRDA_MODULE_ENABLED */
-
-#ifdef HAL_IWDG_MODULE_ENABLED
- #include "stm32f0xx_hal_iwdg.h"
-#endif /* HAL_IWDG_MODULE_ENABLED */
-
-#ifdef HAL_PCD_MODULE_ENABLED
- #include "stm32f0xx_hal_pcd.h"
-#endif /* HAL_PCD_MODULE_ENABLED */
-
-#ifdef HAL_PWR_MODULE_ENABLED
- #include "stm32f0xx_hal_pwr.h"
-#endif /* HAL_PWR_MODULE_ENABLED */
-
-#ifdef HAL_RTC_MODULE_ENABLED
- #include "stm32f0xx_hal_rtc.h"
-#endif /* HAL_RTC_MODULE_ENABLED */
-
-#ifdef HAL_SMARTCARD_MODULE_ENABLED
- #include "stm32f0xx_hal_smartcard.h"
-#endif /* HAL_SMARTCARD_MODULE_ENABLED */
-
-#ifdef HAL_SMBUS_MODULE_ENABLED
- #include "stm32f0xx_hal_smbus.h"
-#endif /* HAL_SMBUS_MODULE_ENABLED */
-
-#ifdef HAL_SPI_MODULE_ENABLED
- #include "stm32f0xx_hal_spi.h"
-#endif /* HAL_SPI_MODULE_ENABLED */
-
-#ifdef HAL_TIM_MODULE_ENABLED
- #include "stm32f0xx_hal_tim.h"
-#endif /* HAL_TIM_MODULE_ENABLED */
-
-#ifdef HAL_TSC_MODULE_ENABLED
- #include "stm32f0xx_hal_tsc.h"
-#endif /* HAL_TSC_MODULE_ENABLED */
-
-#ifdef HAL_UART_MODULE_ENABLED
- #include "stm32f0xx_hal_uart.h"
-#endif /* HAL_UART_MODULE_ENABLED */
-
-#ifdef HAL_USART_MODULE_ENABLED
- #include "stm32f0xx_hal_usart.h"
-#endif /* HAL_USART_MODULE_ENABLED */
-
-#ifdef HAL_WWDG_MODULE_ENABLED
- #include "stm32f0xx_hal_wwdg.h"
-#endif /* HAL_WWDG_MODULE_ENABLED */
-
-/* Exported macro ------------------------------------------------------------*/
-#ifdef USE_FULL_ASSERT
-/**
- * @brief The assert_param macro is used for function's parameters check.
- * @param expr If expr is false, it calls assert_failed function
- * which reports the name of the source file and the source
- * line number of the call that failed.
- * If expr is true, it returns no value.
- * @retval None
- */
- #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
-/* Exported functions ------------------------------------------------------- */
- void assert_failed(uint8_t* file, uint32_t line);
-#else
- #define assert_param(expr) ((void)0U)
-#endif /* USE_FULL_ASSERT */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F0xx_HAL_CONF_H */
-
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
-
generated by cgit (git 2.34.1) at 2024-05-17 06:10:32 +0000