diff options
Diffstat (limited to 'fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32f0xx_hal_can_legacy.h')
| -rw-r--r-- | fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32f0xx_hal_can_legacy.h | 794 |
1 files changed, 0 insertions, 794 deletions
diff --git a/fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32f0xx_hal_can_legacy.h b/fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32f0xx_hal_can_legacy.h deleted file mode 100644 index 0df56b5..0000000 --- a/fw/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32f0xx_hal_can_legacy.h +++ /dev/null @@ -1,794 +0,0 @@ -/**
- ******************************************************************************
- * @file stm32f0xx_hal_can_legacy.h
- * @author MCD Application Team
- * @brief Header file of CAN HAL Legacy module.
- ******************************************************************************
- * @attention
- *
- * <h2><center>© Copyright (c) 2017 STMicroelectronics.
- * All rights reserved.</center></h2>
- *
- * This software component is licensed by ST under BSD 3-Clause license,
- * the "License"; You may not use this file except in compliance with the
- * License. You may obtain a copy of the License at:
- * opensource.org/licenses/BSD-3-Clause
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F0xx_HAL_CAN_LEGACY_H
-#define __STM32F0xx_HAL_CAN_LEGACY_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-#if defined(STM32F072xB) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f0xx_hal_def.h"
-
-/** @addtogroup STM32F0xx_HAL_Driver
- * @{
- */
-
-/** @addtogroup CAN
- * @{
- */
-
-/* Exported types ------------------------------------------------------------*/
-/** @defgroup CAN_Exported_Types CAN Exported Types
- * @{
- */
-/**
- * @brief HAL State structures definition
- */
-typedef enum
-{
- HAL_CAN_STATE_RESET = 0x00U, /*!< CAN not yet initialized or disabled */
- HAL_CAN_STATE_READY = 0x01U, /*!< CAN initialized and ready for use */
- HAL_CAN_STATE_BUSY = 0x02U, /*!< CAN process is ongoing */
- HAL_CAN_STATE_BUSY_TX = 0x12U, /*!< CAN process is ongoing */
- HAL_CAN_STATE_BUSY_RX0 = 0x22U, /*!< CAN process is ongoing */
- HAL_CAN_STATE_BUSY_RX1 = 0x32U, /*!< CAN process is ongoing */
- HAL_CAN_STATE_BUSY_TX_RX0 = 0x42U, /*!< CAN process is ongoing */
- HAL_CAN_STATE_BUSY_TX_RX1 = 0x52U, /*!< CAN process is ongoing */
- HAL_CAN_STATE_BUSY_RX0_RX1 = 0x62U, /*!< CAN process is ongoing */
- HAL_CAN_STATE_BUSY_TX_RX0_RX1 = 0x72U, /*!< CAN process is ongoing */
- HAL_CAN_STATE_TIMEOUT = 0x03U, /*!< CAN in Timeout state */
- HAL_CAN_STATE_ERROR = 0x04U /*!< CAN error state */
-
-}HAL_CAN_StateTypeDef;
-
-/**
- * @brief CAN init structure definition
- */
-typedef struct
-{
- uint32_t Prescaler; /*!< Specifies the length of a time quantum.
- This parameter must be a number between Min_Data = 1 and Max_Data = 1024. */
-
- uint32_t Mode; /*!< Specifies the CAN operating mode.
- This parameter can be a value of @ref CAN_operating_mode */
-
- uint32_t SJW; /*!< Specifies the maximum number of time quanta
- the CAN hardware is allowed to lengthen or
- shorten a bit to perform resynchronization.
- This parameter can be a value of @ref CAN_synchronisation_jump_width */
-
- uint32_t BS1; /*!< Specifies the number of time quanta in Bit Segment 1.
- This parameter can be a value of @ref CAN_time_quantum_in_bit_segment_1 */
-
- uint32_t BS2; /*!< Specifies the number of time quanta in Bit Segment 2.
- This parameter can be a value of @ref CAN_time_quantum_in_bit_segment_2 */
-
- uint32_t TTCM; /*!< Enable or disable the time triggered communication mode.
- This parameter can be set to ENABLE or DISABLE. */
-
- uint32_t ABOM; /*!< Enable or disable the automatic bus-off management.
- This parameter can be set to ENABLE or DISABLE. */
-
- uint32_t AWUM; /*!< Enable or disable the automatic wake-up mode.
- This parameter can be set to ENABLE or DISABLE. */
-
- uint32_t NART; /*!< Enable or disable the non-automatic retransmission mode.
- This parameter can be set to ENABLE or DISABLE. */
-
- uint32_t RFLM; /*!< Enable or disable the Receive FIFO Locked mode.
- This parameter can be set to ENABLE or DISABLE. */
-
- uint32_t TXFP; /*!< Enable or disable the transmit FIFO priority.
- This parameter can be set to ENABLE or DISABLE. */
-}CAN_InitTypeDef;
-
-/**
- * @brief CAN filter configuration structure definition
- */
-typedef struct
-{
- uint32_t FilterIdHigh; /*!< Specifies the filter identification number (MSBs for a 32-bit
- configuration, first one for a 16-bit configuration).
- This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
-
- uint32_t FilterIdLow; /*!< Specifies the filter identification number (LSBs for a 32-bit
- configuration, second one for a 16-bit configuration).
- This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
-
- uint32_t FilterMaskIdHigh; /*!< Specifies the filter mask number or identification number,
- according to the mode (MSBs for a 32-bit configuration,
- first one for a 16-bit configuration).
- This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
-
- uint32_t FilterMaskIdLow; /*!< Specifies the filter mask number or identification number,
- according to the mode (LSBs for a 32-bit configuration,
- second one for a 16-bit configuration).
- This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
-
- uint32_t FilterFIFOAssignment; /*!< Specifies the FIFO (0 or 1U) which will be assigned to the filter.
- This parameter can be a value of @ref CAN_filter_FIFO */
-
- uint32_t FilterNumber; /*!< Specifies the filter which will be initialized.
- This parameter must be a number between Min_Data = 0 and Max_Data = 27. */
-
- uint32_t FilterMode; /*!< Specifies the filter mode to be initialized.
- This parameter can be a value of @ref CAN_filter_mode */
-
- uint32_t FilterScale; /*!< Specifies the filter scale.
- This parameter can be a value of @ref CAN_filter_scale */
-
- uint32_t FilterActivation; /*!< Enable or disable the filter.
- This parameter can be set to ENABLE or DISABLE. */
-
- uint32_t BankNumber; /*!< Select the start slave bank filter
- This parameter must be a number between Min_Data = 0 and Max_Data = 28. */
-
-}CAN_FilterConfTypeDef;
-
-/**
- * @brief CAN Tx message structure definition
- */
-typedef struct
-{
- uint32_t StdId; /*!< Specifies the standard identifier.
- This parameter must be a number between Min_Data = 0 and Max_Data = 0x7FF. */
-
- uint32_t ExtId; /*!< Specifies the extended identifier.
- This parameter must be a number between Min_Data = 0 and Max_Data = 0x1FFFFFFF. */
-
- uint32_t IDE; /*!< Specifies the type of identifier for the message that will be transmitted.
- This parameter can be a value of @ref CAN_identifier_type */
-
- uint32_t RTR; /*!< Specifies the type of frame for the message that will be transmitted.
- This parameter can be a value of @ref CAN_remote_transmission_request */
-
- uint32_t DLC; /*!< Specifies the length of the frame that will be transmitted.
- This parameter must be a number between Min_Data = 0 and Max_Data = 8. */
-
- uint8_t Data[8]; /*!< Contains the data to be transmitted.
- This parameter must be a number between Min_Data = 0 and Max_Data = 0xFF. */
-
-}CanTxMsgTypeDef;
-
-/**
- * @brief CAN Rx message structure definition
- */
-typedef struct
-{
- uint32_t StdId; /*!< Specifies the standard identifier.
- This parameter must be a number between Min_Data = 0 and Max_Data = 0x7FF. */
-
- uint32_t ExtId; /*!< Specifies the extended identifier.
- This parameter must be a number between Min_Data = 0 and Max_Data = 0x1FFFFFFF. */
-
- uint32_t IDE; /*!< Specifies the type of identifier for the message that will be received.
- This parameter can be a value of @ref CAN_identifier_type */
-
- uint32_t RTR; /*!< Specifies the type of frame for the received message.
- This parameter can be a value of @ref CAN_remote_transmission_request */
-
- uint32_t DLC; /*!< Specifies the length of the frame that will be received.
- This parameter must be a number between Min_Data = 0 and Max_Data = 8. */
-
- uint8_t Data[8]; /*!< Contains the data to be received.
- This parameter must be a number between Min_Data = 0 and Max_Data = 0xFF. */
-
- uint32_t FMI; /*!< Specifies the index of the filter the message stored in the mailbox passes through.
- This parameter must be a number between Min_Data = 0 and Max_Data = 0xFF. */
-
- uint32_t FIFONumber; /*!< Specifies the receive FIFO number.
- This parameter can be CAN_FIFO0 or CAN_FIFO1 */
-
-}CanRxMsgTypeDef;
-
-/**
- * @brief CAN handle Structure definition
- */
-typedef struct
-{
- CAN_TypeDef *Instance; /*!< Register base address */
-
- CAN_InitTypeDef Init; /*!< CAN required parameters */
-
- CanTxMsgTypeDef* pTxMsg; /*!< Pointer to transmit structure */
-
- CanRxMsgTypeDef* pRxMsg; /*!< Pointer to reception structure for RX FIFO0 msg */
-
- CanRxMsgTypeDef* pRx1Msg; /*!< Pointer to reception structure for RX FIFO1 msg */
-
- HAL_LockTypeDef Lock; /*!< CAN locking object */
-
- __IO HAL_CAN_StateTypeDef State; /*!< CAN communication state */
-
- __IO uint32_t ErrorCode; /*!< CAN Error code
- This parameter can be a value of @ref CAN_Error_Code */
-
-}CAN_HandleTypeDef;
-/**
- * @}
- */
-
-/* Exported constants --------------------------------------------------------*/
-
-/** @defgroup CAN_Exported_Constants CAN Exported Constants
- * @{
- */
-
-/** @defgroup CAN_Error_Code CAN Error Code
- * @{
- */
-#define HAL_CAN_ERROR_NONE (0x00000000U) /*!< No error */
-#define HAL_CAN_ERROR_EWG (0x00000001U) /*!< EWG error */
-#define HAL_CAN_ERROR_EPV (0x00000002U) /*!< EPV error */
-#define HAL_CAN_ERROR_BOF (0x00000004U) /*!< BOF error */
-#define HAL_CAN_ERROR_STF (0x00000008U) /*!< Stuff error */
-#define HAL_CAN_ERROR_FOR (0x00000010U) /*!< Form error */
-#define HAL_CAN_ERROR_ACK (0x00000020U) /*!< Acknowledgment error */
-#define HAL_CAN_ERROR_BR (0x00000040U) /*!< Bit recessive */
-#define HAL_CAN_ERROR_BD (0x00000080U) /*!< LEC dominant */
-#define HAL_CAN_ERROR_CRC (0x00000100U) /*!< LEC transfer error */
-#define HAL_CAN_ERROR_FOV0 (0x00000200U) /*!< FIFO0 overrun error */
-#define HAL_CAN_ERROR_FOV1 (0x00000400U) /*!< FIFO1 overrun error */
-#define HAL_CAN_ERROR_TXFAIL (0x00000800U) /*!< Transmit failure */
-/**
- * @}
- */
-
-/** @defgroup CAN_InitStatus CAN InitStatus
- * @{
- */
-#define CAN_INITSTATUS_FAILED (0x00000000U) /*!< CAN initialization failed */
-#define CAN_INITSTATUS_SUCCESS (0x00000001U) /*!< CAN initialization OK */
-/**
- * @}
- */
-
-/** @defgroup CAN_operating_mode CAN Operating Mode
- * @{
- */
-#define CAN_MODE_NORMAL (0x00000000U) /*!< Normal mode */
-#define CAN_MODE_LOOPBACK ((uint32_t)CAN_BTR_LBKM) /*!< Loopback mode */
-#define CAN_MODE_SILENT ((uint32_t)CAN_BTR_SILM) /*!< Silent mode */
-#define CAN_MODE_SILENT_LOOPBACK ((uint32_t)(CAN_BTR_LBKM | CAN_BTR_SILM)) /*!< Loopback combined with silent mode */
-/**
- * @}
- */
-
-
-/** @defgroup CAN_synchronisation_jump_width CAN Synchronization Jump Width
- * @{
- */
-#define CAN_SJW_1TQ (0x00000000U) /*!< 1 time quantum */
-#define CAN_SJW_2TQ ((uint32_t)CAN_BTR_SJW_0) /*!< 2 time quantum */
-#define CAN_SJW_3TQ ((uint32_t)CAN_BTR_SJW_1) /*!< 3 time quantum */
-#define CAN_SJW_4TQ ((uint32_t)CAN_BTR_SJW) /*!< 4 time quantum */
-/**
- * @}
- */
-
-/** @defgroup CAN_time_quantum_in_bit_segment_1 CAN Time Quantum in Bit Segment 1
- * @{
- */
-#define CAN_BS1_1TQ (0x00000000U) /*!< 1 time quantum */
-#define CAN_BS1_2TQ ((uint32_t)CAN_BTR_TS1_0) /*!< 2 time quantum */
-#define CAN_BS1_3TQ ((uint32_t)CAN_BTR_TS1_1) /*!< 3 time quantum */
-#define CAN_BS1_4TQ ((uint32_t)(CAN_BTR_TS1_1 | CAN_BTR_TS1_0)) /*!< 4 time quantum */
-#define CAN_BS1_5TQ ((uint32_t)CAN_BTR_TS1_2) /*!< 5 time quantum */
-#define CAN_BS1_6TQ ((uint32_t)(CAN_BTR_TS1_2 | CAN_BTR_TS1_0)) /*!< 6 time quantum */
-#define CAN_BS1_7TQ ((uint32_t)(CAN_BTR_TS1_2 | CAN_BTR_TS1_1)) /*!< 7 time quantum */
-#define CAN_BS1_8TQ ((uint32_t)(CAN_BTR_TS1_2 | CAN_BTR_TS1_1 | CAN_BTR_TS1_0)) /*!< 8 time quantum */
-#define CAN_BS1_9TQ ((uint32_t)CAN_BTR_TS1_3) /*!< 9 time quantum */
-#define CAN_BS1_10TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_0)) /*!< 10 time quantum */
-#define CAN_BS1_11TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_1)) /*!< 11 time quantum */
-#define CAN_BS1_12TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_1 | CAN_BTR_TS1_0)) /*!< 12 time quantum */
-#define CAN_BS1_13TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_2)) /*!< 13 time quantum */
-#define CAN_BS1_14TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_2 | CAN_BTR_TS1_0)) /*!< 14 time quantum */
-#define CAN_BS1_15TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_2 | CAN_BTR_TS1_1)) /*!< 15 time quantum */
-#define CAN_BS1_16TQ ((uint32_t)CAN_BTR_TS1) /*!< 16 time quantum */
-/**
- * @}
- */
-
-/** @defgroup CAN_time_quantum_in_bit_segment_2 CAN Time Quantum in Bit Segment 2
- * @{
- */
-#define CAN_BS2_1TQ (0x00000000U) /*!< 1 time quantum */
-#define CAN_BS2_2TQ ((uint32_t)CAN_BTR_TS2_0) /*!< 2 time quantum */
-#define CAN_BS2_3TQ ((uint32_t)CAN_BTR_TS2_1) /*!< 3 time quantum */
-#define CAN_BS2_4TQ ((uint32_t)(CAN_BTR_TS2_1 | CAN_BTR_TS2_0)) /*!< 4 time quantum */
-#define CAN_BS2_5TQ ((uint32_t)CAN_BTR_TS2_2) /*!< 5 time quantum */
-#define CAN_BS2_6TQ ((uint32_t)(CAN_BTR_TS2_2 | CAN_BTR_TS2_0)) /*!< 6 time quantum */
-#define CAN_BS2_7TQ ((uint32_t)(CAN_BTR_TS2_2 | CAN_BTR_TS2_1)) /*!< 7 time quantum */
-#define CAN_BS2_8TQ ((uint32_t)CAN_BTR_TS2) /*!< 8 time quantum */
-/**
- * @}
- */
-
-/** @defgroup CAN_filter_mode CAN Filter Mode
- * @{
- */
-#define CAN_FILTERMODE_IDMASK ((uint8_t)0x00U) /*!< Identifier mask mode */
-#define CAN_FILTERMODE_IDLIST ((uint8_t)0x01U) /*!< Identifier list mode */
-/**
- * @}
- */
-
-/** @defgroup CAN_filter_scale CAN Filter Scale
- * @{
- */
-#define CAN_FILTERSCALE_16BIT ((uint8_t)0x00U) /*!< Two 16-bit filters */
-#define CAN_FILTERSCALE_32BIT ((uint8_t)0x01U) /*!< One 32-bit filter */
-/**
- * @}
- */
-
-/** @defgroup CAN_filter_FIFO CAN Filter FIFO
- * @{
- */
-#define CAN_FILTER_FIFO0 ((uint8_t)0x00U) /*!< Filter FIFO 0 assignment for filter x */
-#define CAN_FILTER_FIFO1 ((uint8_t)0x01U) /*!< Filter FIFO 1 assignment for filter x */
-/**
- * @}
- */
-
-/** @defgroup CAN_identifier_type CAN Identifier Type
- * @{
- */
-#define CAN_ID_STD (0x00000000U) /*!< Standard Id */
-#define CAN_ID_EXT (0x00000004U) /*!< Extended Id */
-/**
- * @}
- */
-
-/** @defgroup CAN_remote_transmission_request CAN Remote Transmission Request
- * @{
- */
-#define CAN_RTR_DATA (0x00000000U) /*!< Data frame */
-#define CAN_RTR_REMOTE (0x00000002U) /*!< Remote frame */
-/**
- * @}
- */
-
-/** @defgroup CAN_receive_FIFO_number_constants CAN Receive FIFO Number
- * @{
- */
-#define CAN_FIFO0 ((uint8_t)0x00U) /*!< CAN FIFO 0 used to receive */
-#define CAN_FIFO1 ((uint8_t)0x01U) /*!< CAN FIFO 1 used to receive */
-/**
- * @}
- */
-
-/** @defgroup CAN_flags CAN Flags
- * @{
- */
-/* If the flag is 0x3XXXXXXX, it means that it can be used with CAN_GetFlagStatus()
- and CAN_ClearFlag() functions. */
-/* If the flag is 0x1XXXXXXX, it means that it can only be used with
- CAN_GetFlagStatus() function. */
-
-/* Transmit Flags */
-#define CAN_FLAG_RQCP0 (0x00000500U) /*!< Request MailBox0 flag */
-#define CAN_FLAG_RQCP1 (0x00000508U) /*!< Request MailBox1 flag */
-#define CAN_FLAG_RQCP2 (0x00000510U) /*!< Request MailBox2 flag */
-#define CAN_FLAG_TXOK0 (0x00000501U) /*!< Transmission OK MailBox0 flag */
-#define CAN_FLAG_TXOK1 (0x00000509U) /*!< Transmission OK MailBox1 flag */
-#define CAN_FLAG_TXOK2 (0x00000511U) /*!< Transmission OK MailBox2 flag */
-#define CAN_FLAG_TME0 (0x0000051AU) /*!< Transmit mailbox 0 empty flag */
-#define CAN_FLAG_TME1 (0x0000051BU) /*!< Transmit mailbox 0 empty flag */
-#define CAN_FLAG_TME2 (0x0000051CU) /*!< Transmit mailbox 0 empty flag */
-
-/* Receive Flags */
-#define CAN_FLAG_FF0 (0x00000203U) /*!< FIFO 0 Full flag */
-#define CAN_FLAG_FOV0 (0x00000204U) /*!< FIFO 0 Overrun flag */
-
-#define CAN_FLAG_FF1 (0x00000403U) /*!< FIFO 1 Full flag */
-#define CAN_FLAG_FOV1 (0x00000404U) /*!< FIFO 1 Overrun flag */
-
-/* Operating Mode Flags */
-#define CAN_FLAG_INAK (0x00000100U) /*!< Initialization acknowledge flag */
-#define CAN_FLAG_SLAK (0x00000101U) /*!< Sleep acknowledge flag */
-#define CAN_FLAG_ERRI (0x00000102U) /*!< Error flag */
-#define CAN_FLAG_WKU (0x00000103U) /*!< Wake up flag */
-#define CAN_FLAG_SLAKI (0x00000104U) /*!< Sleep acknowledge flag */
-/* @note When SLAK interrupt is disabled (SLKIE=0U), no polling on SLAKI is possible.
- In this case the SLAK bit can be polled.*/
-
-/* Error Flags */
-#define CAN_FLAG_EWG (0x00000300U) /*!< Error warning flag */
-#define CAN_FLAG_EPV (0x00000301U) /*!< Error passive flag */
-#define CAN_FLAG_BOF (0x00000302U) /*!< Bus-Off flag */
-
-/**
- * @}
- */
-
-
-/** @defgroup CAN_interrupts CAN Interrupts
- * @{
- */
-#define CAN_IT_TME ((uint32_t)CAN_IER_TMEIE) /*!< Transmit mailbox empty interrupt */
-
-/* Receive Interrupts */
-#define CAN_IT_FMP0 ((uint32_t)CAN_IER_FMPIE0) /*!< FIFO 0 message pending interrupt */
-#define CAN_IT_FF0 ((uint32_t)CAN_IER_FFIE0) /*!< FIFO 0 full interrupt */
-#define CAN_IT_FOV0 ((uint32_t)CAN_IER_FOVIE0) /*!< FIFO 0 overrun interrupt */
-#define CAN_IT_FMP1 ((uint32_t)CAN_IER_FMPIE1) /*!< FIFO 1 message pending interrupt */
-#define CAN_IT_FF1 ((uint32_t)CAN_IER_FFIE1) /*!< FIFO 1 full interrupt */
-#define CAN_IT_FOV1 ((uint32_t)CAN_IER_FOVIE1) /*!< FIFO 1 overrun interrupt */
-
-/* Operating Mode Interrupts */
-#define CAN_IT_WKU ((uint32_t)CAN_IER_WKUIE) /*!< Wake-up interrupt */
-#define CAN_IT_SLK ((uint32_t)CAN_IER_SLKIE) /*!< Sleep acknowledge interrupt */
-
-/* Error Interrupts */
-#define CAN_IT_EWG ((uint32_t)CAN_IER_EWGIE) /*!< Error warning interrupt */
-#define CAN_IT_EPV ((uint32_t)CAN_IER_EPVIE) /*!< Error passive interrupt */
-#define CAN_IT_BOF ((uint32_t)CAN_IER_BOFIE) /*!< Bus-off interrupt */
-#define CAN_IT_LEC ((uint32_t)CAN_IER_LECIE) /*!< Last error code interrupt */
-#define CAN_IT_ERR ((uint32_t)CAN_IER_ERRIE) /*!< Error Interrupt */
-
-/**
- * @}
- */
-
-/** @defgroup CAN_Mailboxes CAN Mailboxes
-* @{
-*/
-/* Mailboxes definition */
-#define CAN_TXMAILBOX_0 ((uint8_t)0x00U)
-#define CAN_TXMAILBOX_1 ((uint8_t)0x01U)
-#define CAN_TXMAILBOX_2 ((uint8_t)0x02U)
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/* Exported macros -----------------------------------------------------------*/
-/** @defgroup CAN_Exported_Macros CAN Exported Macros
- * @{
- */
-
-/** @brief Reset CAN handle state
- * @param __HANDLE__ CAN handle.
- * @retval None
- */
-#define __HAL_CAN_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CAN_STATE_RESET)
-
-/**
- * @brief Enable the specified CAN interrupts.
- * @param __HANDLE__ CAN handle.
- * @param __INTERRUPT__ CAN Interrupt
- * @retval None
- */
-#define __HAL_CAN_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IER) |= (__INTERRUPT__))
-
-/**
- * @brief Disable the specified CAN interrupts.
- * @param __HANDLE__ CAN handle.
- * @param __INTERRUPT__ CAN Interrupt
- * @retval None
- */
-#define __HAL_CAN_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IER) &= ~(__INTERRUPT__))
-
-/**
- * @brief Return the number of pending received messages.
- * @param __HANDLE__ CAN handle.
- * @param __FIFONUMBER__ Receive FIFO number, CAN_FIFO0 or CAN_FIFO1.
- * @retval The number of pending message.
- */
-#define __HAL_CAN_MSG_PENDING(__HANDLE__, __FIFONUMBER__) (((__FIFONUMBER__) == CAN_FIFO0)? \
-((uint8_t)((__HANDLE__)->Instance->RF0R&0x03U)) : ((uint8_t)((__HANDLE__)->Instance->RF1R&0x03U)))
-
-/** @brief Check whether the specified CAN flag is set or not.
- * @param __HANDLE__ specifies the CAN Handle.
- * @param __FLAG__ specifies the flag to check.
- * This parameter can be one of the following values:
- * @arg CAN_TSR_RQCP0: Request MailBox0 Flag
- * @arg CAN_TSR_RQCP1: Request MailBox1 Flag
- * @arg CAN_TSR_RQCP2: Request MailBox2 Flag
- * @arg CAN_FLAG_TXOK0: Transmission OK MailBox0 Flag
- * @arg CAN_FLAG_TXOK1: Transmission OK MailBox1 Flag
- * @arg CAN_FLAG_TXOK2: Transmission OK MailBox2 Flag
- * @arg CAN_FLAG_TME0: Transmit mailbox 0 empty Flag
- * @arg CAN_FLAG_TME1: Transmit mailbox 1 empty Flag
- * @arg CAN_FLAG_TME2: Transmit mailbox 2 empty Flag
- * @arg CAN_FLAG_FMP0: FIFO 0 Message Pending Flag
- * @arg CAN_FLAG_FF0: FIFO 0 Full Flag
- * @arg CAN_FLAG_FOV0: FIFO 0 Overrun Flag
- * @arg CAN_FLAG_FMP1: FIFO 1 Message Pending Flag
- * @arg CAN_FLAG_FF1: FIFO 1 Full Flag
- * @arg CAN_FLAG_FOV1: FIFO 1 Overrun Flag
- * @arg CAN_FLAG_WKU: Wake up Flag
- * @arg CAN_FLAG_SLAK: Sleep acknowledge Flag
- * @arg CAN_FLAG_SLAKI: Sleep acknowledge Flag
- * @arg CAN_FLAG_EWG: Error Warning Flag
- * @arg CAN_FLAG_EPV: Error Passive Flag
- * @arg CAN_FLAG_BOF: Bus-Off Flag
- * @retval The new state of __FLAG__ (TRUE or FALSE).
- */
-#define __HAL_CAN_GET_FLAG(__HANDLE__, __FLAG__) \
-((((__FLAG__) >> 8U) == 5U)? ((((__HANDLE__)->Instance->TSR) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
- (((__FLAG__) >> 8U) == 2U)? ((((__HANDLE__)->Instance->RF0R) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
- (((__FLAG__) >> 8U) == 4U)? ((((__HANDLE__)->Instance->RF1R) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
- (((__FLAG__) >> 8U) == 1U)? ((((__HANDLE__)->Instance->MSR) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
- ((((__HANDLE__)->Instance->ESR) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))))
-
-/** @brief Clear the specified CAN pending flag.
- * @param __HANDLE__ specifies the CAN Handle.
- * @param __FLAG__ specifies the flag to check.
- * This parameter can be one of the following values:
- * @arg CAN_TSR_RQCP0: Request MailBox0 Flag
- * @arg CAN_TSR_RQCP1: Request MailBox1 Flag
- * @arg CAN_TSR_RQCP2: Request MailBox2 Flag
- * @arg CAN_FLAG_TXOK0: Transmission OK MailBox0 Flag
- * @arg CAN_FLAG_TXOK1: Transmission OK MailBox1 Flag
- * @arg CAN_FLAG_TXOK2: Transmission OK MailBox2 Flag
- * @arg CAN_FLAG_TME0: Transmit mailbox 0 empty Flag
- * @arg CAN_FLAG_TME1: Transmit mailbox 1 empty Flag
- * @arg CAN_FLAG_TME2: Transmit mailbox 2 empty Flag
- * @arg CAN_FLAG_FMP0: FIFO 0 Message Pending Flag
- * @arg CAN_FLAG_FF0: FIFO 0 Full Flag
- * @arg CAN_FLAG_FOV0: FIFO 0 Overrun Flag
- * @arg CAN_FLAG_FMP1: FIFO 1 Message Pending Flag
- * @arg CAN_FLAG_FF1: FIFO 1 Full Flag
- * @arg CAN_FLAG_FOV1: FIFO 1 Overrun Flag
- * @arg CAN_FLAG_WKU: Wake up Flag
- * @arg CAN_FLAG_SLAKI: Sleep acknowledge Flag
- * @arg CAN_FLAG_EWG: Error Warning Flag
- * @arg CAN_FLAG_EPV: Error Passive Flag
- * @arg CAN_FLAG_BOF: Bus-Off Flag
- * @retval The new state of __FLAG__ (TRUE or FALSE).
- */
-#define __HAL_CAN_CLEAR_FLAG(__HANDLE__, __FLAG__) \
-((((__FLAG__) >> 8U) == 5U)? (((__HANDLE__)->Instance->TSR) = (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
- (((__FLAG__) >> 8U) == 2U)? (((__HANDLE__)->Instance->RF0R) = (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
- (((__FLAG__) >> 8U) == 4U)? (((__HANDLE__)->Instance->RF1R) = (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
- (((__FLAG__) >> 8U) == 1U)? (((__HANDLE__)->Instance->MSR) = (1U << ((__FLAG__) & CAN_FLAG_MASK))): 0U)
-
-
-/** @brief Check if the specified CAN interrupt source is enabled or disabled.
- * @param __HANDLE__ specifies the CAN Handle.
- * @param __INTERRUPT__ specifies the CAN interrupt source to check.
- * This parameter can be one of the following values:
- * @arg CAN_IT_TME: Transmit mailbox empty interrupt enable
- * @arg CAN_IT_FMP0: FIFO0 message pending interrupt enablev
- * @arg CAN_IT_FMP1: FIFO1 message pending interrupt enable
- * @retval The new state of __IT__ (TRUE or FALSE).
- */
-#define __HAL_CAN_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->IER & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
-
-/**
- * @brief Check the transmission status of a CAN Frame.
- * @param __HANDLE__ CAN handle.
- * @param __TRANSMITMAILBOX__ the number of the mailbox that is used for transmission.
- * @retval The new status of transmission (TRUE or FALSE).
- */
-#define __HAL_CAN_TRANSMIT_STATUS(__HANDLE__, __TRANSMITMAILBOX__)\
-(((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_0)? ((((__HANDLE__)->Instance->TSR) & (CAN_TSR_RQCP0 | CAN_TSR_TME0)) == (CAN_TSR_RQCP0 | CAN_TSR_TME0)) :\
- ((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_1)? ((((__HANDLE__)->Instance->TSR) & (CAN_TSR_RQCP1 | CAN_TSR_TME1)) == (CAN_TSR_RQCP1 | CAN_TSR_TME1)) :\
- ((((__HANDLE__)->Instance->TSR) & (CAN_TSR_RQCP2 | CAN_TSR_TME2)) == (CAN_TSR_RQCP2 | CAN_TSR_TME2)))
-
- /**
- * @brief Release the specified receive FIFO.
- * @param __HANDLE__ CAN handle.
- * @param __FIFONUMBER__ Receive FIFO number, CAN_FIFO0 or CAN_FIFO1.
- * @retval None
- */
-#define __HAL_CAN_FIFO_RELEASE(__HANDLE__, __FIFONUMBER__) (((__FIFONUMBER__) == CAN_FIFO0)? \
-((__HANDLE__)->Instance->RF0R |= CAN_RF0R_RFOM0) : ((__HANDLE__)->Instance->RF1R |= CAN_RF1R_RFOM1))
-
-/**
- * @brief Cancel a transmit request.
- * @param __HANDLE__ specifies the CAN Handle.
- * @param __TRANSMITMAILBOX__ the number of the mailbox that is used for transmission.
- * @retval None
- */
-#define __HAL_CAN_CANCEL_TRANSMIT(__HANDLE__, __TRANSMITMAILBOX__)\
-(((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_0)? ((__HANDLE__)->Instance->TSR |= CAN_TSR_ABRQ0) :\
- ((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_1)? ((__HANDLE__)->Instance->TSR |= CAN_TSR_ABRQ1) :\
- ((__HANDLE__)->Instance->TSR |= CAN_TSR_ABRQ2))
-
-/**
- * @brief Enable or disables the DBG Freeze for CAN.
- * @param __HANDLE__ specifies the CAN Handle.
- * @param __NEWSTATE__ new state of the CAN peripheral.
- * This parameter can be: ENABLE (CAN reception/transmission is frozen
- * during debug. Reception FIFOs can still be accessed/controlled normally)
- * or DISABLE (CAN is working during debug).
- * @retval None
- */
-#define __HAL_CAN_DBG_FREEZE(__HANDLE__, __NEWSTATE__) (((__NEWSTATE__) == ENABLE)? \
-((__HANDLE__)->Instance->MCR |= CAN_MCR_DBF) : ((__HANDLE__)->Instance->MCR &= ~CAN_MCR_DBF))
-
-/**
- * @}
- */
-
-/* Exported functions --------------------------------------------------------*/
-/** @addtogroup CAN_Exported_Functions CAN Exported Functions
- * @{
- */
-
-/** @addtogroup CAN_Exported_Functions_Group1 Initialization and de-initialization functions
- * @brief Initialization and Configuration functions
- * @{
- */
-
-/* Initialization and de-initialization functions *****************************/
-HAL_StatusTypeDef HAL_CAN_Init(CAN_HandleTypeDef* hcan);
-HAL_StatusTypeDef HAL_CAN_ConfigFilter(CAN_HandleTypeDef* hcan, CAN_FilterConfTypeDef* sFilterConfig);
-HAL_StatusTypeDef HAL_CAN_DeInit(CAN_HandleTypeDef* hcan);
-void HAL_CAN_MspInit(CAN_HandleTypeDef* hcan);
-void HAL_CAN_MspDeInit(CAN_HandleTypeDef* hcan);
-/**
- * @}
- */
-
-/** @addtogroup CAN_Exported_Functions_Group2 Input and Output operation functions
- * @brief I/O operation functions
- * @{
- */
-/* IO operation functions *****************************************************/
-HAL_StatusTypeDef HAL_CAN_Transmit(CAN_HandleTypeDef *hcan, uint32_t Timeout);
-HAL_StatusTypeDef HAL_CAN_Transmit_IT(CAN_HandleTypeDef *hcan);
-HAL_StatusTypeDef HAL_CAN_Receive(CAN_HandleTypeDef *hcan, uint8_t FIFONumber, uint32_t Timeout);
-HAL_StatusTypeDef HAL_CAN_Receive_IT(CAN_HandleTypeDef *hcan, uint8_t FIFONumber);
-HAL_StatusTypeDef HAL_CAN_Sleep(CAN_HandleTypeDef *hcan);
-HAL_StatusTypeDef HAL_CAN_WakeUp(CAN_HandleTypeDef *hcan);
-void HAL_CAN_IRQHandler(CAN_HandleTypeDef* hcan);
-void HAL_CAN_TxCpltCallback(CAN_HandleTypeDef* hcan);
-void HAL_CAN_RxCpltCallback(CAN_HandleTypeDef* hcan);
-void HAL_CAN_ErrorCallback(CAN_HandleTypeDef *hcan);
-/**
- * @}
- */
-
-/** @addtogroup CAN_Exported_Functions_Group3 Peripheral State and Error functions
- * @brief CAN Peripheral State functions
- * @{
- */
-/* Peripheral State and Error functions ***************************************/
-uint32_t HAL_CAN_GetError(CAN_HandleTypeDef *hcan);
-HAL_CAN_StateTypeDef HAL_CAN_GetState(CAN_HandleTypeDef* hcan);
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/* Private types -------------------------------------------------------------*/
-/** @defgroup CAN_Private_Types CAN Private Types
- * @{
- */
-
-/**
- * @}
- */
-
-/* Private variables ---------------------------------------------------------*/
-/** @defgroup CAN_Private_Variables CAN Private Variables
- * @{
- */
-
-/**
- * @}
- */
-
-/* Private constants ---------------------------------------------------------*/
-/** @defgroup CAN_Private_Constants CAN Private Constants
- * @{
- */
-#define CAN_TXSTATUS_NOMAILBOX ((uint8_t)0x04U) /*!< CAN cell did not provide CAN_TxStatus_NoMailBox */
-#define CAN_FLAG_MASK (0x000000FFU)
-/**
- * @}
- */
-
-/* Private Macros -----------------------------------------------------------*/
-/** @defgroup CAN_Private_Macros CAN Private Macros
- * @{
- */
-
-#define IS_CAN_MODE(MODE) (((MODE) == CAN_MODE_NORMAL) || \
- ((MODE) == CAN_MODE_LOOPBACK)|| \
- ((MODE) == CAN_MODE_SILENT) || \
- ((MODE) == CAN_MODE_SILENT_LOOPBACK))
-
-#define IS_CAN_SJW(SJW) (((SJW) == CAN_SJW_1TQ) || ((SJW) == CAN_SJW_2TQ)|| \
- ((SJW) == CAN_SJW_3TQ) || ((SJW) == CAN_SJW_4TQ))
-
-#define IS_CAN_BS1(BS1) ((BS1) <= CAN_BS1_16TQ)
-
-#define IS_CAN_BS2(BS2) ((BS2) <= CAN_BS2_8TQ)
-
-#define IS_CAN_PRESCALER(PRESCALER) (((PRESCALER) >= 1U) && ((PRESCALER) <= 1024U))
-
-#define IS_CAN_FILTER_NUMBER(NUMBER) ((NUMBER) <= 27U)
-
-#define IS_CAN_FILTER_MODE(MODE) (((MODE) == CAN_FILTERMODE_IDMASK) || \
- ((MODE) == CAN_FILTERMODE_IDLIST))
-
-#define IS_CAN_FILTER_SCALE(SCALE) (((SCALE) == CAN_FILTERSCALE_16BIT) || \
- ((SCALE) == CAN_FILTERSCALE_32BIT))
-
-#define IS_CAN_FILTER_FIFO(FIFO) (((FIFO) == CAN_FILTER_FIFO0) || \
- ((FIFO) == CAN_FILTER_FIFO1))
-
-#define IS_CAN_BANKNUMBER(BANKNUMBER) ((BANKNUMBER) <= 28U)
-
-#define IS_CAN_TRANSMITMAILBOX(TRANSMITMAILBOX) ((TRANSMITMAILBOX) <= ((uint8_t)0x02U))
-#define IS_CAN_STDID(STDID) ((STDID) <= (0x7FFU))
-#define IS_CAN_EXTID(EXTID) ((EXTID) <= (0x1FFFFFFFU))
-#define IS_CAN_DLC(DLC) ((DLC) <= ((uint8_t)0x08U))
-
-#define IS_CAN_IDTYPE(IDTYPE) (((IDTYPE) == CAN_ID_STD) || \
- ((IDTYPE) == CAN_ID_EXT))
-
-#define IS_CAN_RTR(RTR) (((RTR) == CAN_RTR_DATA) || ((RTR) == CAN_RTR_REMOTE))
-
-#define IS_CAN_FIFO(FIFO) (((FIFO) == CAN_FIFO0) || ((FIFO) == CAN_FIFO1))
-
-#define IS_CAN_IT(IT) (((IT) == CAN_IT_TME) || ((IT) == CAN_IT_FMP0) ||\
- ((IT) == CAN_IT_FF0) || ((IT) == CAN_IT_FOV0) ||\
- ((IT) == CAN_IT_FMP1) || ((IT) == CAN_IT_FF1) ||\
- ((IT) == CAN_IT_FOV1) || ((IT) == CAN_IT_EWG) ||\
- ((IT) == CAN_IT_EPV) || ((IT) == CAN_IT_BOF) ||\
- ((IT) == CAN_IT_LEC) || ((IT) == CAN_IT_ERR) ||\
- ((IT) == CAN_IT_WKU) || ((IT) == CAN_IT_SLK))
-
-#define IS_CAN_CLEAR_IT(IT) (((IT) == CAN_IT_TME) || ((IT) == CAN_IT_FF0) ||\
- ((IT) == CAN_IT_FOV0)|| ((IT) == CAN_IT_FF1) ||\
- ((IT) == CAN_IT_FOV1)|| ((IT) == CAN_IT_EWG) ||\
- ((IT) == CAN_IT_EPV) || ((IT) == CAN_IT_BOF) ||\
- ((IT) == CAN_IT_LEC) || ((IT) == CAN_IT_ERR) ||\
- ((IT) == CAN_IT_WKU) || ((IT) == CAN_IT_SLK))
-
-/**
- * @}
- */
-/* End of private macros -----------------------------------------------------*/
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#endif /* STM32F072xB || STM32F042x6 || STM32F048xx || STM32F078xx || STM32F091xC || STM32F098xx */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F0xx_HAL_CAN_LEGACY_H */
-
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|