diff options
Diffstat (limited to 'fw/hid-dials/Drivers/CMSIS/DSP/Source/FilteringFunctions/arm_fir_interpolate_q15.c')
| -rw-r--r-- | fw/hid-dials/Drivers/CMSIS/DSP/Source/FilteringFunctions/arm_fir_interpolate_q15.c | 496 |
1 files changed, 0 insertions, 496 deletions
diff --git a/fw/hid-dials/Drivers/CMSIS/DSP/Source/FilteringFunctions/arm_fir_interpolate_q15.c b/fw/hid-dials/Drivers/CMSIS/DSP/Source/FilteringFunctions/arm_fir_interpolate_q15.c deleted file mode 100644 index 1cedd25..0000000 --- a/fw/hid-dials/Drivers/CMSIS/DSP/Source/FilteringFunctions/arm_fir_interpolate_q15.c +++ /dev/null @@ -1,496 +0,0 @@ -/* ----------------------------------------------------------------------
- * Project: CMSIS DSP Library
- * Title: arm_fir_interpolate_q15.c
- * Description: Q15 FIR interpolation
- *
- * $Date: 27. January 2017
- * $Revision: V.1.5.1
- *
- * Target Processor: Cortex-M cores
- * -------------------------------------------------------------------- */
-/*
- * Copyright (C) 2010-2017 ARM Limited or its affiliates. All rights reserved.
- *
- * SPDX-License-Identifier: Apache-2.0
- *
- * Licensed under the Apache License, Version 2.0 (the License); you may
- * not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an AS IS BASIS, WITHOUT
- * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#include "arm_math.h"
-
-/**
- * @ingroup groupFilters
- */
-
-/**
- * @addtogroup FIR_Interpolate
- * @{
- */
-
-/**
- * @brief Processing function for the Q15 FIR interpolator.
- * @param[in] *S points to an instance of the Q15 FIR interpolator structure.
- * @param[in] *pSrc points to the block of input data.
- * @param[out] *pDst points to the block of output data.
- * @param[in] blockSize number of input samples to process per call.
- * @return none.
- *
- * <b>Scaling and Overflow Behavior:</b>
- * \par
- * The function is implemented using a 64-bit internal accumulator.
- * Both coefficients and state variables are represented in 1.15 format and multiplications yield a 2.30 result.
- * The 2.30 intermediate results are accumulated in a 64-bit accumulator in 34.30 format.
- * There is no risk of internal overflow with this approach and the full precision of intermediate multiplications is preserved.
- * After all additions have been performed, the accumulator is truncated to 34.15 format by discarding low 15 bits.
- * Lastly, the accumulator is saturated to yield a result in 1.15 format.
- */
-
-#if defined (ARM_MATH_DSP)
-
- /* Run the below code for Cortex-M4 and Cortex-M3 */
-
-void arm_fir_interpolate_q15(
- const arm_fir_interpolate_instance_q15 * S,
- q15_t * pSrc,
- q15_t * pDst,
- uint32_t blockSize)
-{
- q15_t *pState = S->pState; /* State pointer */
- q15_t *pCoeffs = S->pCoeffs; /* Coefficient pointer */
- q15_t *pStateCurnt; /* Points to the current sample of the state */
- q15_t *ptr1, *ptr2; /* Temporary pointers for state and coefficient buffers */
- q63_t sum0; /* Accumulators */
- q15_t x0, c0; /* Temporary variables to hold state and coefficient values */
- uint32_t i, blkCnt, j, tapCnt; /* Loop counters */
- uint16_t phaseLen = S->phaseLength; /* Length of each polyphase filter component */
- uint32_t blkCntN2;
- q63_t acc0, acc1;
- q15_t x1;
-
- /* S->pState buffer contains previous frame (phaseLen - 1) samples */
- /* pStateCurnt points to the location where the new input data should be written */
- pStateCurnt = S->pState + ((q31_t) phaseLen - 1);
-
- /* Initialise blkCnt */
- blkCnt = blockSize / 2;
- blkCntN2 = blockSize - (2 * blkCnt);
-
- /* Samples loop unrolled by 2 */
- while (blkCnt > 0U)
- {
- /* Copy new input sample into the state buffer */
- *pStateCurnt++ = *pSrc++;
- *pStateCurnt++ = *pSrc++;
-
- /* Address modifier index of coefficient buffer */
- j = 1U;
-
- /* Loop over the Interpolation factor. */
- i = (S->L);
-
- while (i > 0U)
- {
- /* Set accumulator to zero */
- acc0 = 0;
- acc1 = 0;
-
- /* Initialize state pointer */
- ptr1 = pState;
-
- /* Initialize coefficient pointer */
- ptr2 = pCoeffs + (S->L - j);
-
- /* Loop over the polyPhase length. Unroll by a factor of 4.
- ** Repeat until we've computed numTaps-(4*S->L) coefficients. */
- tapCnt = phaseLen >> 2U;
-
- x0 = *(ptr1++);
-
- while (tapCnt > 0U)
- {
-
- /* Read the input sample */
- x1 = *(ptr1++);
-
- /* Read the coefficient */
- c0 = *(ptr2);
-
- /* Perform the multiply-accumulate */
- acc0 += (q63_t) x0 *c0;
- acc1 += (q63_t) x1 *c0;
-
-
- /* Read the coefficient */
- c0 = *(ptr2 + S->L);
-
- /* Read the input sample */
- x0 = *(ptr1++);
-
- /* Perform the multiply-accumulate */
- acc0 += (q63_t) x1 *c0;
- acc1 += (q63_t) x0 *c0;
-
-
- /* Read the coefficient */
- c0 = *(ptr2 + S->L * 2);
-
- /* Read the input sample */
- x1 = *(ptr1++);
-
- /* Perform the multiply-accumulate */
- acc0 += (q63_t) x0 *c0;
- acc1 += (q63_t) x1 *c0;
-
- /* Read the coefficient */
- c0 = *(ptr2 + S->L * 3);
-
- /* Read the input sample */
- x0 = *(ptr1++);
-
- /* Perform the multiply-accumulate */
- acc0 += (q63_t) x1 *c0;
- acc1 += (q63_t) x0 *c0;
-
-
- /* Upsampling is done by stuffing L-1 zeros between each sample.
- * So instead of multiplying zeros with coefficients,
- * Increment the coefficient pointer by interpolation factor times. */
- ptr2 += 4 * S->L;
-
- /* Decrement the loop counter */
- tapCnt--;
- }
-
- /* If the polyPhase length is not a multiple of 4, compute the remaining filter taps */
- tapCnt = phaseLen % 0x4U;
-
- while (tapCnt > 0U)
- {
-
- /* Read the input sample */
- x1 = *(ptr1++);
-
- /* Read the coefficient */
- c0 = *(ptr2);
-
- /* Perform the multiply-accumulate */
- acc0 += (q63_t) x0 *c0;
- acc1 += (q63_t) x1 *c0;
-
- /* Increment the coefficient pointer by interpolation factor times. */
- ptr2 += S->L;
-
- /* update states for next sample processing */
- x0 = x1;
-
- /* Decrement the loop counter */
- tapCnt--;
- }
-
- /* The result is in the accumulator, store in the destination buffer. */
- *pDst = (q15_t) (__SSAT((acc0 >> 15), 16));
- *(pDst + S->L) = (q15_t) (__SSAT((acc1 >> 15), 16));
-
- pDst++;
-
- /* Increment the address modifier index of coefficient buffer */
- j++;
-
- /* Decrement the loop counter */
- i--;
- }
-
- /* Advance the state pointer by 1
- * to process the next group of interpolation factor number samples */
- pState = pState + 2;
-
- pDst += S->L;
-
- /* Decrement the loop counter */
- blkCnt--;
- }
-
- /* If the blockSize is not a multiple of 2, compute any remaining output samples here.
- ** No loop unrolling is used. */
- blkCnt = blkCntN2;
-
- /* Loop over the blockSize. */
- while (blkCnt > 0U)
- {
- /* Copy new input sample into the state buffer */
- *pStateCurnt++ = *pSrc++;
-
- /* Address modifier index of coefficient buffer */
- j = 1U;
-
- /* Loop over the Interpolation factor. */
- i = S->L;
- while (i > 0U)
- {
- /* Set accumulator to zero */
- sum0 = 0;
-
- /* Initialize state pointer */
- ptr1 = pState;
-
- /* Initialize coefficient pointer */
- ptr2 = pCoeffs + (S->L - j);
-
- /* Loop over the polyPhase length. Unroll by a factor of 4.
- ** Repeat until we've computed numTaps-(4*S->L) coefficients. */
- tapCnt = phaseLen >> 2;
- while (tapCnt > 0U)
- {
-
- /* Read the coefficient */
- c0 = *(ptr2);
-
- /* Upsampling is done by stuffing L-1 zeros between each sample.
- * So instead of multiplying zeros with coefficients,
- * Increment the coefficient pointer by interpolation factor times. */
- ptr2 += S->L;
-
- /* Read the input sample */
- x0 = *(ptr1++);
-
- /* Perform the multiply-accumulate */
- sum0 += (q63_t) x0 *c0;
-
- /* Read the coefficient */
- c0 = *(ptr2);
-
- /* Increment the coefficient pointer by interpolation factor times. */
- ptr2 += S->L;
-
- /* Read the input sample */
- x0 = *(ptr1++);
-
- /* Perform the multiply-accumulate */
- sum0 += (q63_t) x0 *c0;
-
- /* Read the coefficient */
- c0 = *(ptr2);
-
- /* Increment the coefficient pointer by interpolation factor times. */
- ptr2 += S->L;
-
- /* Read the input sample */
- x0 = *(ptr1++);
-
- /* Perform the multiply-accumulate */
- sum0 += (q63_t) x0 *c0;
-
- /* Read the coefficient */
- c0 = *(ptr2);
-
- /* Increment the coefficient pointer by interpolation factor times. */
- ptr2 += S->L;
-
- /* Read the input sample */
- x0 = *(ptr1++);
-
- /* Perform the multiply-accumulate */
- sum0 += (q63_t) x0 *c0;
-
- /* Decrement the loop counter */
- tapCnt--;
- }
-
- /* If the polyPhase length is not a multiple of 4, compute the remaining filter taps */
- tapCnt = phaseLen & 0x3U;
-
- while (tapCnt > 0U)
- {
- /* Read the coefficient */
- c0 = *(ptr2);
-
- /* Increment the coefficient pointer by interpolation factor times. */
- ptr2 += S->L;
-
- /* Read the input sample */
- x0 = *(ptr1++);
-
- /* Perform the multiply-accumulate */
- sum0 += (q63_t) x0 *c0;
-
- /* Decrement the loop counter */
- tapCnt--;
- }
-
- /* The result is in the accumulator, store in the destination buffer. */
- *pDst++ = (q15_t) (__SSAT((sum0 >> 15), 16));
-
- j++;
-
- /* Decrement the loop counter */
- i--;
- }
-
- /* Advance the state pointer by 1
- * to process the next group of interpolation factor number samples */
- pState = pState + 1;
-
- /* Decrement the loop counter */
- blkCnt--;
- }
-
-
- /* Processing is complete.
- ** Now copy the last phaseLen - 1 samples to the satrt of the state buffer.
- ** This prepares the state buffer for the next function call. */
-
- /* Points to the start of the state buffer */
- pStateCurnt = S->pState;
-
- i = ((uint32_t) phaseLen - 1U) >> 2U;
-
- /* copy data */
- while (i > 0U)
- {
-#ifndef UNALIGNED_SUPPORT_DISABLE
-
- *__SIMD32(pStateCurnt)++ = *__SIMD32(pState)++;
- *__SIMD32(pStateCurnt)++ = *__SIMD32(pState)++;
-
-#else
-
- *pStateCurnt++ = *pState++;
- *pStateCurnt++ = *pState++;
- *pStateCurnt++ = *pState++;
- *pStateCurnt++ = *pState++;
-
-#endif /* #ifndef UNALIGNED_SUPPORT_DISABLE */
-
- /* Decrement the loop counter */
- i--;
- }
-
- i = ((uint32_t) phaseLen - 1U) % 0x04U;
-
- while (i > 0U)
- {
- *pStateCurnt++ = *pState++;
-
- /* Decrement the loop counter */
- i--;
- }
-}
-
-#else
-
- /* Run the below code for Cortex-M0 */
-
-void arm_fir_interpolate_q15(
- const arm_fir_interpolate_instance_q15 * S,
- q15_t * pSrc,
- q15_t * pDst,
- uint32_t blockSize)
-{
- q15_t *pState = S->pState; /* State pointer */
- q15_t *pCoeffs = S->pCoeffs; /* Coefficient pointer */
- q15_t *pStateCurnt; /* Points to the current sample of the state */
- q15_t *ptr1, *ptr2; /* Temporary pointers for state and coefficient buffers */
- q63_t sum; /* Accumulator */
- q15_t x0, c0; /* Temporary variables to hold state and coefficient values */
- uint32_t i, blkCnt, tapCnt; /* Loop counters */
- uint16_t phaseLen = S->phaseLength; /* Length of each polyphase filter component */
-
-
- /* S->pState buffer contains previous frame (phaseLen - 1) samples */
- /* pStateCurnt points to the location where the new input data should be written */
- pStateCurnt = S->pState + (phaseLen - 1U);
-
- /* Total number of intput samples */
- blkCnt = blockSize;
-
- /* Loop over the blockSize. */
- while (blkCnt > 0U)
- {
- /* Copy new input sample into the state buffer */
- *pStateCurnt++ = *pSrc++;
-
- /* Loop over the Interpolation factor. */
- i = S->L;
-
- while (i > 0U)
- {
- /* Set accumulator to zero */
- sum = 0;
-
- /* Initialize state pointer */
- ptr1 = pState;
-
- /* Initialize coefficient pointer */
- ptr2 = pCoeffs + (i - 1U);
-
- /* Loop over the polyPhase length */
- tapCnt = (uint32_t) phaseLen;
-
- while (tapCnt > 0U)
- {
- /* Read the coefficient */
- c0 = *ptr2;
-
- /* Increment the coefficient pointer by interpolation factor times. */
- ptr2 += S->L;
-
- /* Read the input sample */
- x0 = *ptr1++;
-
- /* Perform the multiply-accumulate */
- sum += ((q31_t) x0 * c0);
-
- /* Decrement the loop counter */
- tapCnt--;
- }
-
- /* Store the result after converting to 1.15 format in the destination buffer */
- *pDst++ = (q15_t) (__SSAT((sum >> 15), 16));
-
- /* Decrement the loop counter */
- i--;
- }
-
- /* Advance the state pointer by 1
- * to process the next group of interpolation factor number samples */
- pState = pState + 1;
-
- /* Decrement the loop counter */
- blkCnt--;
- }
-
- /* Processing is complete.
- ** Now copy the last phaseLen - 1 samples to the start of the state buffer.
- ** This prepares the state buffer for the next function call. */
-
- /* Points to the start of the state buffer */
- pStateCurnt = S->pState;
-
- i = (uint32_t) phaseLen - 1U;
-
- while (i > 0U)
- {
- *pStateCurnt++ = *pState++;
-
- /* Decrement the loop counter */
- i--;
- }
-
-}
-
-#endif /* #if defined (ARM_MATH_DSP) */
-
-
- /**
- * @} end of FIR_Interpolate group
- */
|