1 files changed, 137 insertions, 0 deletions
diff --git a/fw/hid-dials/Drivers/CMSIS/DSP/Source/BasicMathFunctions/arm_scale_q7.c b/fw/hid-dials/Drivers/CMSIS/DSP/Source/BasicMathFunctions/arm_scale_q7.c
new file mode 100644
index 0000000..8c90396
--- /dev/null
+++ b/fw/hid-dials/Drivers/CMSIS/DSP/Source/BasicMathFunctions/arm_scale_q7.c
@@ -0,0 +1,137 @@
+/* ----------------------------------------------------------------------
+ * Project:      CMSIS DSP Library
+ * Title:        arm_scale_q7.c
+ * Description:  Multiplies a Q7 vector by a scalar
+ *
+ * $Date:        27. January 2017
+ * $Revision:    V.1.5.1
+ *
+ * Target Processor: Cortex-M cores
+ * -------------------------------------------------------------------- */
+/*
+ * Copyright (C) 2010-2017 ARM Limited or its affiliates. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "arm_math.h"
+
+/**
+ * @ingroup groupMath
+ */
+
+/**
+ * @addtogroup scale
+ * @{
+ */
+
+/**
+ * @brief Multiplies a Q7 vector by a scalar.
+ * @param[in]       *pSrc points to the input vector
+ * @param[in]       scaleFract fractional portion of the scale value
+ * @param[in]       shift number of bits to shift the result by
+ * @param[out]      *pDst points to the output vector
+ * @param[in]       blockSize number of samples in the vector
+ * @return none.
+ *
+ * <b>Scaling and Overflow Behavior:</b>
+ * \par
+ * The input data <code>*pSrc</code> and <code>scaleFract</code> are in 1.7 format.
+ * These are multiplied to yield a 2.14 intermediate result and this is shifted with saturation to 1.7 format.
+ */
+
+void arm_scale_q7(
+  q7_t * pSrc,
+  q7_t scaleFract,
+  int8_t shift,
+  q7_t * pDst,
+  uint32_t blockSize)
+{
+  int8_t kShift = 7 - shift;                     /* shift to apply after scaling */
+  uint32_t blkCnt;                               /* loop counter */
+
+#if defined (ARM_MATH_DSP)
+
+/* Run the below code for Cortex-M4 and Cortex-M3 */
+  q7_t in1, in2, in3, in4, out1, out2, out3, out4;      /* Temporary variables to store input & output */
+
+
+  /*loop Unrolling */
+  blkCnt = blockSize >> 2U;
+
+
+  /* First part of the processing with loop unrolling.  Compute 4 outputs at a time.
+   ** a second loop below computes the remaining 1 to 3 samples. */
+  while (blkCnt > 0U)
+  {
+    /* Reading 4 inputs from memory */
+    in1 = *pSrc++;
+    in2 = *pSrc++;
+    in3 = *pSrc++;
+    in4 = *pSrc++;
+
+    /* C = A * scale */
+    /* Scale the inputs and then store the results in the temporary variables. */
+    out1 = (q7_t) (__SSAT(((in1) * scaleFract) >> kShift, 8));
+    out2 = (q7_t) (__SSAT(((in2) * scaleFract) >> kShift, 8));
+    out3 = (q7_t) (__SSAT(((in3) * scaleFract) >> kShift, 8));
+    out4 = (q7_t) (__SSAT(((in4) * scaleFract) >> kShift, 8));
+
+    /* Packing the individual outputs into 32bit and storing in
+     * destination buffer in single write */
+    *__SIMD32(pDst)++ = __PACKq7(out1, out2, out3, out4);
+
+    /* Decrement the loop counter */
+    blkCnt--;
+  }
+
+  /* If the blockSize is not a multiple of 4, compute any remaining output samples here.
+   ** No loop unrolling is used. */
+  blkCnt = blockSize % 0x4U;
+
+  while (blkCnt > 0U)
+  {
+    /* C = A * scale */
+    /* Scale the input and then store the result in the destination buffer. */
+    *pDst++ = (q7_t) (__SSAT(((*pSrc++) * scaleFract) >> kShift, 8));
+
+    /* Decrement the loop counter */
+    blkCnt--;
+  }
+
+#else
+
+  /* Run the below code for Cortex-M0 */
+
+  /* Initialize blkCnt with number of samples */
+  blkCnt = blockSize;
+
+  while (blkCnt > 0U)
+  {
+    /* C = A * scale */
+    /* Scale the input and then store the result in the destination buffer. */
+    *pDst++ = (q7_t) (__SSAT((((q15_t) * pSrc++ * scaleFract) >> kShift), 8));
+
+    /* Decrement the loop counter */
+    blkCnt--;
+  }
+
+#endif /* #if defined (ARM_MATH_DSP) */
+
+}
+
+/**
+ * @} end of scale group
+ */