1 files changed, 0 insertions, 148 deletions
diff --git a/fw/hid-dials/Drivers/CMSIS/DSP/Source/BasicMathFunctions/arm_mult_q31.c b/fw/hid-dials/Drivers/CMSIS/DSP/Source/BasicMathFunctions/arm_mult_q31.c
deleted file mode 100644
index 93f0c73..0000000
--- a/fw/hid-dials/Drivers/CMSIS/DSP/Source/BasicMathFunctions/arm_mult_q31.c
+++ /dev/null
@@ -1,148 +0,0 @@
-/* ----------------------------------------------------------------------
- * Project:      CMSIS DSP Library
- * Title:        arm_mult_q31.c
- * Description:  Q31 vector multiplication
- *
- * $Date:        27. January 2017
- * $Revision:    V.1.5.1
- *
- * Target Processor: Cortex-M cores
- * -------------------------------------------------------------------- */
-/*
- * Copyright (C) 2010-2017 ARM Limited or its affiliates. All rights reserved.
- *
- * SPDX-License-Identifier: Apache-2.0
- *
- * Licensed under the Apache License, Version 2.0 (the License); you may
- * not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an AS IS BASIS, WITHOUT
- * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#include "arm_math.h"
-
-/**
- * @ingroup groupMath
- */
-
-/**
- * @addtogroup BasicMult
- * @{
- */
-
-/**
- * @brief Q31 vector multiplication.
- * @param[in]       *pSrcA points to the first input vector
- * @param[in]       *pSrcB points to the second input vector
- * @param[out]      *pDst points to the output vector
- * @param[in]       blockSize number of samples in each vector
- * @return none.
- *
- * <b>Scaling and Overflow Behavior:</b>
- * \par
- * The function uses saturating arithmetic.
- * Results outside of the allowable Q31 range[0x80000000 0x7FFFFFFF] will be saturated.
- */
-
-void arm_mult_q31(
-  q31_t * pSrcA,
-  q31_t * pSrcB,
-  q31_t * pDst,
-  uint32_t blockSize)
-{
-  uint32_t blkCnt;                               /* loop counters */
-
-#if defined (ARM_MATH_DSP)
-
-/* Run the below code for Cortex-M4 and Cortex-M3 */
-  q31_t inA1, inA2, inA3, inA4;                  /* temporary input variables */
-  q31_t inB1, inB2, inB3, inB4;                  /* temporary input variables */
-  q31_t out1, out2, out3, out4;                  /* temporary output variables */
-
-  /* loop Unrolling */
-  blkCnt = blockSize >> 2U;
-
-  /* First part of the processing with loop unrolling.  Compute 4 outputs at a time.
-   ** a second loop below computes the remaining 1 to 3 samples. */
-  while (blkCnt > 0U)
-  {
-    /* C = A * B */
-    /* Multiply the inputs and then store the results in the destination buffer. */
-    inA1 = *pSrcA++;
-    inA2 = *pSrcA++;
-    inA3 = *pSrcA++;
-    inA4 = *pSrcA++;
-    inB1 = *pSrcB++;
-    inB2 = *pSrcB++;
-    inB3 = *pSrcB++;
-    inB4 = *pSrcB++;
-
-    out1 = ((q63_t) inA1 * inB1) >> 32;
-    out2 = ((q63_t) inA2 * inB2) >> 32;
-    out3 = ((q63_t) inA3 * inB3) >> 32;
-    out4 = ((q63_t) inA4 * inB4) >> 32;
-
-    out1 = __SSAT(out1, 31);
-    out2 = __SSAT(out2, 31);
-    out3 = __SSAT(out3, 31);
-    out4 = __SSAT(out4, 31);
-
-    *pDst++ = out1 << 1U;
-    *pDst++ = out2 << 1U;
-    *pDst++ = out3 << 1U;
-    *pDst++ = out4 << 1U;
-
-    /* Decrement the blockSize loop counter */
-    blkCnt--;
-  }
-
-  /* If the blockSize is not a multiple of 4, compute any remaining output samples here.
-   ** No loop unrolling is used. */
-  blkCnt = blockSize % 0x4U;
-
-  while (blkCnt > 0U)
-  {
-    /* C = A * B */
-    /* Multiply the inputs and then store the results in the destination buffer. */
-    inA1 = *pSrcA++;
-    inB1 = *pSrcB++;
-    out1 = ((q63_t) inA1 * inB1) >> 32;
-    out1 = __SSAT(out1, 31);
-    *pDst++ = out1 << 1U;
-
-    /* Decrement the blockSize loop counter */
-    blkCnt--;
-  }
-
-#else
-
-  /* Run the below code for Cortex-M0 */
-
-  /* Initialize blkCnt with number of samples */
-  blkCnt = blockSize;
-
-
-  while (blkCnt > 0U)
-  {
-    /* C = A * B */
-    /* Multiply the inputs and then store the results in the destination buffer. */
-    *pDst++ =
-      (q31_t) clip_q63_to_q31(((q63_t) (*pSrcA++) * (*pSrcB++)) >> 31);
-
-    /* Decrement the blockSize loop counter */
-    blkCnt--;
-  }
-
-#endif /* #if defined (ARM_MATH_DSP) */
-}
-
-/**
- * @} end of BasicMult group
- */