1 files changed, 118 insertions, 0 deletions
diff --git a/fw/hid-dials/Drivers/CMSIS/DSP/Source/BasicMathFunctions/arm_abs_q31.c b/fw/hid-dials/Drivers/CMSIS/DSP/Source/BasicMathFunctions/arm_abs_q31.c
new file mode 100644
index 0000000..25cd036
--- /dev/null
+++ b/fw/hid-dials/Drivers/CMSIS/DSP/Source/BasicMathFunctions/arm_abs_q31.c
@@ -0,0 +1,118 @@
+/* ----------------------------------------------------------------------
+ * Project:      CMSIS DSP Library
+ * Title:        arm_abs_q31.c
+ * Description:  Q31 vector absolute value
+ *
+ * $Date:        27. January 2017
+ * $Revision:    V.1.5.1
+ *
+ * Target Processor: Cortex-M cores
+ * -------------------------------------------------------------------- */
+/*
+ * Copyright (C) 2010-2017 ARM Limited or its affiliates. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "arm_math.h"
+
+/**
+ * @ingroup groupMath
+ */
+
+/**
+ * @addtogroup BasicAbs
+ * @{
+ */
+
+
+/**
+ * @brief Q31 vector absolute value.
+ * @param[in]       *pSrc points to the input buffer
+ * @param[out]      *pDst points to the output buffer
+ * @param[in]       blockSize number of samples in each vector
+ * @return none.
+ *
+ * <b>Scaling and Overflow Behavior:</b>
+ * \par
+ * The function uses saturating arithmetic.
+ * The Q31 value -1 (0x80000000) will be saturated to the maximum allowable positive value 0x7FFFFFFF.
+ */
+
+void arm_abs_q31(
+  q31_t * pSrc,
+  q31_t * pDst,
+  uint32_t blockSize)
+{
+  uint32_t blkCnt;                               /* loop counter */
+  q31_t in;                                      /* Input value */
+
+#if defined (ARM_MATH_DSP)
+
+  /* Run the below code for Cortex-M4 and Cortex-M3 */
+  q31_t in1, in2, in3, in4;
+
+  /*loop Unrolling */
+  blkCnt = blockSize >> 2U;
+
+  /* First part of the processing with loop unrolling.  Compute 4 outputs at a time.
+   ** a second loop below computes the remaining 1 to 3 samples. */
+  while (blkCnt > 0U)
+  {
+    /* C = |A| */
+    /* Calculate absolute of input (if -1 then saturated to 0x7fffffff) and then store the results in the destination buffer. */
+    in1 = *pSrc++;
+    in2 = *pSrc++;
+    in3 = *pSrc++;
+    in4 = *pSrc++;
+
+    *pDst++ = (in1 > 0) ? in1 : (q31_t)__QSUB(0, in1);
+    *pDst++ = (in2 > 0) ? in2 : (q31_t)__QSUB(0, in2);
+    *pDst++ = (in3 > 0) ? in3 : (q31_t)__QSUB(0, in3);
+    *pDst++ = (in4 > 0) ? in4 : (q31_t)__QSUB(0, in4);
+
+    /* Decrement the loop counter */
+    blkCnt--;
+  }
+
+  /* If the blockSize is not a multiple of 4, compute any remaining output samples here.
+   ** No loop unrolling is used. */
+  blkCnt = blockSize % 0x4U;
+
+#else
+
+  /* Run the below code for Cortex-M0 */
+
+  /* Initialize blkCnt with number of samples */
+  blkCnt = blockSize;
+
+#endif /*   #if defined (ARM_MATH_DSP)   */
+
+  while (blkCnt > 0U)
+  {
+    /* C = |A| */
+    /* Calculate absolute value of the input (if -1 then saturated to 0x7fffffff) and then store the results in the destination buffer. */
+    in = *pSrc++;
+    *pDst++ = (in > 0) ? in : ((in == INT32_MIN) ? INT32_MAX : -in);
+
+    /* Decrement the loop counter */
+    blkCnt--;
+  }
+
+}
+
+/**
+ * @} end of BasicAbs group
+ */