diff options
Diffstat (limited to 'fw/cdc-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h')
| -rw-r--r-- | fw/cdc-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h | 189 |
1 files changed, 189 insertions, 0 deletions
diff --git a/fw/cdc-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h b/fw/cdc-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h new file mode 100644 index 0000000..e716606 --- /dev/null +++ b/fw/cdc-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h @@ -0,0 +1,189 @@ +/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_pwr.h
+ * @author MCD Application Team
+ * @brief Header file of PWR HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_PWR_H
+#define __STM32F0xx_HAL_PWR_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup PWR PWR
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup PWR_Exported_Constants PWR Exported Constants
+ * @{
+ */
+
+/** @defgroup PWR_Regulator_state_in_STOP_mode PWR Regulator state in STOP mode
+ * @{
+ */
+#define PWR_MAINREGULATOR_ON (0x00000000U)
+#define PWR_LOWPOWERREGULATOR_ON PWR_CR_LPDS
+
+#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_ON) || \
+ ((REGULATOR) == PWR_LOWPOWERREGULATOR_ON))
+/**
+ * @}
+ */
+
+/** @defgroup PWR_SLEEP_mode_entry PWR SLEEP mode entry
+ * @{
+ */
+#define PWR_SLEEPENTRY_WFI ((uint8_t)0x01U)
+#define PWR_SLEEPENTRY_WFE ((uint8_t)0x02U)
+#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPENTRY_WFI) || ((ENTRY) == PWR_SLEEPENTRY_WFE))
+/**
+ * @}
+ */
+
+/** @defgroup PWR_STOP_mode_entry PWR STOP mode entry
+ * @{
+ */
+#define PWR_STOPENTRY_WFI ((uint8_t)0x01U)
+#define PWR_STOPENTRY_WFE ((uint8_t)0x02U)
+#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPENTRY_WFI) || ((ENTRY) == PWR_STOPENTRY_WFE))
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup PWR_Exported_Macro PWR Exported Macro
+ * @{
+ */
+
+/** @brief Check PWR flag is set or not.
+ * @param __FLAG__ specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg PWR_FLAG_WU: Wake Up flag. This flag indicates that a wakeup event
+ * was received from the WKUP pin or from the RTC alarm (Alarm A),
+ * RTC Tamper event, RTC TimeStamp event or RTC Wakeup.
+ * An additional wakeup event is detected if the WKUP pin is enabled
+ * (by setting the EWUP bit) when the WKUP pin level is already high.
+ * @arg PWR_FLAG_SB: StandBy flag. This flag indicates that the system was
+ * resumed from StandBy mode.
+ * @arg PWR_FLAG_PVDO: PVD Output. This flag is valid only if PVD is enabled
+ * by the HAL_PWR_EnablePVD() function. The PVD is stopped by Standby mode
+ * For this reason, this bit is equal to 0 after Standby or reset
+ * until the PVDE bit is set.
+ * Warning: this Flag is not available on STM32F030x8 products
+ * @arg PWR_FLAG_VREFINTRDY: This flag indicates that the internal reference
+ * voltage VREFINT is ready.
+ * Warning: this Flag is not available on STM32F030x8 products
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_PWR_GET_FLAG(__FLAG__) ((PWR->CSR & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clear the PWR's pending flags.
+ * @param __FLAG__ specifies the flag to clear.
+ * This parameter can be one of the following values:
+ * @arg PWR_FLAG_WU: Wake Up flag
+ * @arg PWR_FLAG_SB: StandBy flag
+ */
+#define __HAL_PWR_CLEAR_FLAG(__FLAG__) (PWR->CR |= (__FLAG__) << 2U)
+
+
+/**
+ * @}
+ */
+
+/* Include PWR HAL Extension module */
+#include "stm32f0xx_hal_pwr_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup PWR_Exported_Functions PWR Exported Functions
+ * @{
+ */
+
+/** @addtogroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+
+/* Initialization and de-initialization functions *****************************/
+void HAL_PWR_DeInit(void);
+
+/**
+ * @}
+ */
+
+/** @addtogroup PWR_Exported_Functions_Group2 Peripheral Control functions
+ * @{
+ */
+
+/* Peripheral Control functions **********************************************/
+void HAL_PWR_EnableBkUpAccess(void);
+void HAL_PWR_DisableBkUpAccess(void);
+
+/* WakeUp pins configuration functions ****************************************/
+void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinx);
+void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx);
+
+/* Low Power modes configuration functions ************************************/
+void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry);
+void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry);
+void HAL_PWR_EnterSTANDBYMode(void);
+
+void HAL_PWR_EnableSleepOnExit(void);
+void HAL_PWR_DisableSleepOnExit(void);
+void HAL_PWR_EnableSEVOnPend(void);
+void HAL_PWR_DisableSEVOnPend(void);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F0xx_HAL_PWR_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
|