1 files changed, 142 insertions, 0 deletions
diff --git a/fw/cdc-dials/Drivers/CMSIS/DSP/Source/FilteringFunctions/arm_fir_init_q15.c b/fw/cdc-dials/Drivers/CMSIS/DSP/Source/FilteringFunctions/arm_fir_init_q15.c
new file mode 100644
index 0000000..a5638d5
--- /dev/null
+++ b/fw/cdc-dials/Drivers/CMSIS/DSP/Source/FilteringFunctions/arm_fir_init_q15.c
@@ -0,0 +1,142 @@
+/* ----------------------------------------------------------------------
+ * Project:      CMSIS DSP Library
+ * Title:        arm_fir_init_q15.c
+ * Description:  Q15 FIR filter initialization function
+ *
+ * $Date:        27. January 2017
+ * $Revision:    V.1.5.1
+ *
+ * Target Processor: Cortex-M cores
+ * -------------------------------------------------------------------- */
+/*
+ * Copyright (C) 2010-2017 ARM Limited or its affiliates. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "arm_math.h"
+
+/**
+ * @ingroup groupFilters
+ */
+
+/**
+ * @addtogroup FIR
+ * @{
+ */
+
+/**
+ * @param[in,out]  *S points to an instance of the Q15 FIR filter structure.
+ * @param[in] 	   numTaps  Number of filter coefficients in the filter. Must be even and greater than or equal to 4.
+ * @param[in]      *pCoeffs points to the filter coefficients buffer.
+ * @param[in]      *pState points to the state buffer.
+ * @param[in]      blockSize is number of samples processed per call.
+ * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_ARGUMENT_ERROR if
+ * <code>numTaps</code> is not greater than or equal to 4 and even.
+ *
+ * <b>Description:</b>
+ * \par
+ * <code>pCoeffs</code> points to the array of filter coefficients stored in time reversed order:
+ * <pre>
+ *    {b[numTaps-1], b[numTaps-2], b[N-2], ..., b[1], b[0]}
+ * </pre>
+ * Note that <code>numTaps</code> must be even and greater than or equal to 4.
+ * To implement an odd length filter simply increase <code>numTaps</code> by 1 and set the last coefficient to zero.
+ * For example, to implement a filter with <code>numTaps=3</code> and coefficients
+ * <pre>
+ *     {0.3, -0.8, 0.3}
+ * </pre>
+ * set <code>numTaps=4</code> and use the coefficients:
+ * <pre>
+ *     {0.3, -0.8, 0.3, 0}.
+ * </pre>
+ * Similarly, to implement a two point filter
+ * <pre>
+ *     {0.3, -0.3}
+ * </pre>
+ * set <code>numTaps=4</code> and use the coefficients:
+ * <pre>
+ *     {0.3, -0.3, 0, 0}.
+ * </pre>
+ * \par
+ * <code>pState</code> points to the array of state variables.
+ * <code>pState</code> is of length <code>numTaps+blockSize</code>, when running on Cortex-M4 and Cortex-M3  and is of length <code>numTaps+blockSize-1</code>, when running on Cortex-M0 where <code>blockSize</code> is the number of input samples processed by each call to <code>arm_fir_q15()</code>.
+ */
+
+arm_status arm_fir_init_q15(
+  arm_fir_instance_q15 * S,
+  uint16_t numTaps,
+  q15_t * pCoeffs,
+  q15_t * pState,
+  uint32_t blockSize)
+{
+  arm_status status;
+
+
+#if defined (ARM_MATH_DSP)
+
+  /* Run the below code for Cortex-M4 and Cortex-M3 */
+
+  /* The Number of filter coefficients in the filter must be even and at least 4 */
+  if (numTaps & 0x1U)
+  {
+    status = ARM_MATH_ARGUMENT_ERROR;
+  }
+  else
+  {
+    /* Assign filter taps */
+    S->numTaps = numTaps;
+
+    /* Assign coefficient pointer */
+    S->pCoeffs = pCoeffs;
+
+    /* Clear the state buffer.  The size is always (blockSize + numTaps ) */
+    memset(pState, 0, (numTaps + (blockSize)) * sizeof(q15_t));
+
+    /* Assign state pointer */
+    S->pState = pState;
+
+    status = ARM_MATH_SUCCESS;
+  }
+
+  return (status);
+
+#else
+
+  /* Run the below code for Cortex-M0 */
+
+  /* Assign filter taps */
+  S->numTaps = numTaps;
+
+  /* Assign coefficient pointer */
+  S->pCoeffs = pCoeffs;
+
+  /* Clear the state buffer.  The size is always (blockSize + numTaps - 1) */
+  memset(pState, 0, (numTaps + (blockSize - 1U)) * sizeof(q15_t));
+
+  /* Assign state pointer */
+  S->pState = pState;
+
+  status = ARM_MATH_SUCCESS;
+
+  return (status);
+
+#endif /*  #if defined (ARM_MATH_DSP) */
+
+}
+
+/**
+ * @} end of FIR group
+ */