diff options
Diffstat (limited to 'fw/Middlewares')
7 files changed, 0 insertions, 2321 deletions
diff --git a/fw/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_core.h b/fw/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_core.h deleted file mode 100644 index 6550cd7..0000000 --- a/fw/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_core.h +++ /dev/null @@ -1,167 +0,0 @@ -/**
- ******************************************************************************
- * @file usbd_core.h
- * @author MCD Application Team
- * @version V2.4.2
- * @date 11-December-2015
- * @brief Header file for usbd_core.c file
- ******************************************************************************
- * @attention
- *
- * <h2><center>© COPYRIGHT 2015 STMicroelectronics</center></h2>
- *
- * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
- * You may not use this file except in compliance with the License.
- * You may obtain a copy of the License at:
- *
- * http://www.st.com/software_license_agreement_liberty_v2
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __USBD_CORE_H
-#define __USBD_CORE_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "usbd_conf.h"
-#include "usbd_def.h"
-#include "usbd_ioreq.h"
-#include "usbd_ctlreq.h"
-
-/** @addtogroup STM32_USB_DEVICE_LIBRARY
- * @{
- */
-
-/** @defgroup USBD_CORE
- * @brief This file is the Header file for usbd_core.c file
- * @{
- */
-
-
-/** @defgroup USBD_CORE_Exported_Defines
- * @{
- */
-
-/**
- * @}
- */
-
-
-/** @defgroup USBD_CORE_Exported_TypesDefinitions
- * @{
- */
-
-
-/**
- * @}
- */
-
-
-
-/** @defgroup USBD_CORE_Exported_Macros
- * @{
- */
-
-/**
- * @}
- */
-
-/** @defgroup USBD_CORE_Exported_Variables
- * @{
- */
-#define USBD_SOF USBD_LL_SOF
-/**
- * @}
- */
-
-/** @defgroup USBD_CORE_Exported_FunctionsPrototype
- * @{
- */
-USBD_StatusTypeDef USBD_Init(USBD_HandleTypeDef *pdev, USBD_DescriptorsTypeDef *pdesc, uint8_t id);
-USBD_StatusTypeDef USBD_DeInit(USBD_HandleTypeDef *pdev);
-USBD_StatusTypeDef USBD_Start (USBD_HandleTypeDef *pdev);
-USBD_StatusTypeDef USBD_Stop (USBD_HandleTypeDef *pdev);
-USBD_StatusTypeDef USBD_RegisterClass(USBD_HandleTypeDef *pdev, USBD_ClassTypeDef *pclass);
-
-USBD_StatusTypeDef USBD_RunTestMode (USBD_HandleTypeDef *pdev);
-USBD_StatusTypeDef USBD_SetClassConfig(USBD_HandleTypeDef *pdev, uint8_t cfgidx);
-USBD_StatusTypeDef USBD_ClrClassConfig(USBD_HandleTypeDef *pdev, uint8_t cfgidx);
-
-USBD_StatusTypeDef USBD_LL_SetupStage(USBD_HandleTypeDef *pdev, uint8_t *psetup);
-USBD_StatusTypeDef USBD_LL_DataOutStage(USBD_HandleTypeDef *pdev , uint8_t epnum, uint8_t *pdata);
-USBD_StatusTypeDef USBD_LL_DataInStage(USBD_HandleTypeDef *pdev , uint8_t epnum, uint8_t *pdata);
-
-USBD_StatusTypeDef USBD_LL_Reset(USBD_HandleTypeDef *pdev);
-USBD_StatusTypeDef USBD_LL_SetSpeed(USBD_HandleTypeDef *pdev, USBD_SpeedTypeDef speed);
-USBD_StatusTypeDef USBD_LL_Suspend(USBD_HandleTypeDef *pdev);
-USBD_StatusTypeDef USBD_LL_Resume(USBD_HandleTypeDef *pdev);
-
-USBD_StatusTypeDef USBD_LL_SOF(USBD_HandleTypeDef *pdev);
-USBD_StatusTypeDef USBD_LL_IsoINIncomplete(USBD_HandleTypeDef *pdev, uint8_t epnum);
-USBD_StatusTypeDef USBD_LL_IsoOUTIncomplete(USBD_HandleTypeDef *pdev, uint8_t epnum);
-
-USBD_StatusTypeDef USBD_LL_DevConnected(USBD_HandleTypeDef *pdev);
-USBD_StatusTypeDef USBD_LL_DevDisconnected(USBD_HandleTypeDef *pdev);
-
-/* USBD Low Level Driver */
-USBD_StatusTypeDef USBD_LL_Init (USBD_HandleTypeDef *pdev);
-USBD_StatusTypeDef USBD_LL_DeInit (USBD_HandleTypeDef *pdev);
-USBD_StatusTypeDef USBD_LL_Start(USBD_HandleTypeDef *pdev);
-USBD_StatusTypeDef USBD_LL_Stop (USBD_HandleTypeDef *pdev);
-USBD_StatusTypeDef USBD_LL_OpenEP (USBD_HandleTypeDef *pdev,
- uint8_t ep_addr,
- uint8_t ep_type,
- uint16_t ep_mps);
-
-USBD_StatusTypeDef USBD_LL_CloseEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr);
-USBD_StatusTypeDef USBD_LL_FlushEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr);
-USBD_StatusTypeDef USBD_LL_StallEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr);
-USBD_StatusTypeDef USBD_LL_ClearStallEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr);
-uint8_t USBD_LL_IsStallEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr);
-USBD_StatusTypeDef USBD_LL_SetUSBAddress (USBD_HandleTypeDef *pdev, uint8_t dev_addr);
-USBD_StatusTypeDef USBD_LL_Transmit (USBD_HandleTypeDef *pdev,
- uint8_t ep_addr,
- uint8_t *pbuf,
- uint16_t size);
-
-USBD_StatusTypeDef USBD_LL_PrepareReceive(USBD_HandleTypeDef *pdev,
- uint8_t ep_addr,
- uint8_t *pbuf,
- uint16_t size);
-
-uint32_t USBD_LL_GetRxDataSize (USBD_HandleTypeDef *pdev, uint8_t ep_addr);
-void USBD_LL_Delay (uint32_t Delay);
-
-/**
- * @}
- */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __USBD_CORE_H */
-
-/**
- * @}
- */
-
-/**
-* @}
-*/
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
-
-
-
diff --git a/fw/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ctlreq.h b/fw/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ctlreq.h deleted file mode 100644 index 66380fd..0000000 --- a/fw/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ctlreq.h +++ /dev/null @@ -1,113 +0,0 @@ -/**
- ******************************************************************************
- * @file usbd_req.h
- * @author MCD Application Team
- * @version V2.4.2
- * @date 11-December-2015
- * @brief Header file for the usbd_req.c file
- ******************************************************************************
- * @attention
- *
- * <h2><center>© COPYRIGHT 2015 STMicroelectronics</center></h2>
- *
- * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
- * You may not use this file except in compliance with the License.
- * You may obtain a copy of the License at:
- *
- * http://www.st.com/software_license_agreement_liberty_v2
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __USB_REQUEST_H
-#define __USB_REQUEST_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "usbd_def.h"
-
-
-/** @addtogroup STM32_USB_DEVICE_LIBRARY
- * @{
- */
-
-/** @defgroup USBD_REQ
- * @brief header file for the usbd_req.c file
- * @{
- */
-
-/** @defgroup USBD_REQ_Exported_Defines
- * @{
- */
-/**
- * @}
- */
-
-
-/** @defgroup USBD_REQ_Exported_Types
- * @{
- */
-/**
- * @}
- */
-
-
-
-/** @defgroup USBD_REQ_Exported_Macros
- * @{
- */
-/**
- * @}
- */
-
-/** @defgroup USBD_REQ_Exported_Variables
- * @{
- */
-/**
- * @}
- */
-
-/** @defgroup USBD_REQ_Exported_FunctionsPrototype
- * @{
- */
-
-USBD_StatusTypeDef USBD_StdDevReq (USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req);
-USBD_StatusTypeDef USBD_StdItfReq (USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req);
-USBD_StatusTypeDef USBD_StdEPReq (USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req);
-
-
-void USBD_CtlError (USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req);
-
-void USBD_ParseSetupRequest (USBD_SetupReqTypedef *req, uint8_t *pdata);
-
-void USBD_GetString (uint8_t *desc, uint8_t *unicode, uint16_t *len);
-/**
- * @}
- */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __USB_REQUEST_H */
-
-/**
- * @}
- */
-
-/**
-* @}
-*/
-
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/fw/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_def.h b/fw/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_def.h deleted file mode 100644 index 969e324..0000000 --- a/fw/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_def.h +++ /dev/null @@ -1,330 +0,0 @@ -/**
- ******************************************************************************
- * @file usbd_def.h
- * @author MCD Application Team
- * @version V2.4.2
- * @date 11-December-2015
- * @brief General defines for the usb device library
- ******************************************************************************
- * @attention
- *
- * <h2><center>© COPYRIGHT 2015 STMicroelectronics</center></h2>
- *
- * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
- * You may not use this file except in compliance with the License.
- * You may obtain a copy of the License at:
- *
- * http://www.st.com/software_license_agreement_liberty_v2
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __USBD_DEF_H
-#define __USBD_DEF_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "usbd_conf.h"
-
-/** @addtogroup STM32_USBD_DEVICE_LIBRARY
- * @{
- */
-
-/** @defgroup USB_DEF
- * @brief general defines for the usb device library file
- * @{
- */
-
-/** @defgroup USB_DEF_Exported_Defines
- * @{
- */
-
-#ifndef NULL
-#define NULL 0
-#endif
-
-
-#define USB_LEN_DEV_QUALIFIER_DESC 0x0A
-#define USB_LEN_DEV_DESC 0x12
-#define USB_LEN_CFG_DESC 0x09
-#define USB_LEN_IF_DESC 0x09
-#define USB_LEN_EP_DESC 0x07
-#define USB_LEN_OTG_DESC 0x03
-#define USB_LEN_LANGID_STR_DESC 0x04
-#define USB_LEN_OTHER_SPEED_DESC_SIZ 0x09
-
-#define USBD_IDX_LANGID_STR 0x00
-#define USBD_IDX_MFC_STR 0x01
-#define USBD_IDX_PRODUCT_STR 0x02
-#define USBD_IDX_SERIAL_STR 0x03
-#define USBD_IDX_CONFIG_STR 0x04
-#define USBD_IDX_INTERFACE_STR 0x05
-
-#define USB_REQ_TYPE_STANDARD 0x00
-#define USB_REQ_TYPE_CLASS 0x20
-#define USB_REQ_TYPE_VENDOR 0x40
-#define USB_REQ_TYPE_MASK 0x60
-
-#define USB_REQ_RECIPIENT_DEVICE 0x00
-#define USB_REQ_RECIPIENT_INTERFACE 0x01
-#define USB_REQ_RECIPIENT_ENDPOINT 0x02
-#define USB_REQ_RECIPIENT_MASK 0x03
-
-#define USB_REQ_GET_STATUS 0x00
-#define USB_REQ_CLEAR_FEATURE 0x01
-#define USB_REQ_SET_FEATURE 0x03
-#define USB_REQ_SET_ADDRESS 0x05
-#define USB_REQ_GET_DESCRIPTOR 0x06
-#define USB_REQ_SET_DESCRIPTOR 0x07
-#define USB_REQ_GET_CONFIGURATION 0x08
-#define USB_REQ_SET_CONFIGURATION 0x09
-#define USB_REQ_GET_INTERFACE 0x0A
-#define USB_REQ_SET_INTERFACE 0x0B
-#define USB_REQ_SYNCH_FRAME 0x0C
-
-#define USB_DESC_TYPE_DEVICE 1
-#define USB_DESC_TYPE_CONFIGURATION 2
-#define USB_DESC_TYPE_STRING 3
-#define USB_DESC_TYPE_INTERFACE 4
-#define USB_DESC_TYPE_ENDPOINT 5
-#define USB_DESC_TYPE_DEVICE_QUALIFIER 6
-#define USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION 7
-#define USB_DESC_TYPE_BOS 0x0F
-
-#define USB_CONFIG_REMOTE_WAKEUP 2
-#define USB_CONFIG_SELF_POWERED 1
-
-#define USB_FEATURE_EP_HALT 0
-#define USB_FEATURE_REMOTE_WAKEUP 1
-#define USB_FEATURE_TEST_MODE 2
-
-#define USB_DEVICE_CAPABITY_TYPE 0x10
-
-#define USB_HS_MAX_PACKET_SIZE 512
-#define USB_FS_MAX_PACKET_SIZE 64
-#define USB_MAX_EP0_SIZE 64
-
-/* Device Status */
-#define USBD_STATE_DEFAULT 1
-#define USBD_STATE_ADDRESSED 2
-#define USBD_STATE_CONFIGURED 3
-#define USBD_STATE_SUSPENDED 4
-
-
-/* EP0 State */
-#define USBD_EP0_IDLE 0
-#define USBD_EP0_SETUP 1
-#define USBD_EP0_DATA_IN 2
-#define USBD_EP0_DATA_OUT 3
-#define USBD_EP0_STATUS_IN 4
-#define USBD_EP0_STATUS_OUT 5
-#define USBD_EP0_STALL 6
-
-#define USBD_EP_TYPE_CTRL 0
-#define USBD_EP_TYPE_ISOC 1
-#define USBD_EP_TYPE_BULK 2
-#define USBD_EP_TYPE_INTR 3
-
-
-/**
- * @}
- */
-
-
-/** @defgroup USBD_DEF_Exported_TypesDefinitions
- * @{
- */
-
-typedef struct usb_setup_req
-{
-
- uint8_t bmRequest;
- uint8_t bRequest;
- uint16_t wValue;
- uint16_t wIndex;
- uint16_t wLength;
-}USBD_SetupReqTypedef;
-
-struct _USBD_HandleTypeDef;
-
-typedef struct _Device_cb
-{
- uint8_t (*Init) (struct _USBD_HandleTypeDef *pdev , uint8_t cfgidx);
- uint8_t (*DeInit) (struct _USBD_HandleTypeDef *pdev , uint8_t cfgidx);
- /* Control Endpoints*/
- uint8_t (*Setup) (struct _USBD_HandleTypeDef *pdev , USBD_SetupReqTypedef *req);
- uint8_t (*EP0_TxSent) (struct _USBD_HandleTypeDef *pdev );
- uint8_t (*EP0_RxReady) (struct _USBD_HandleTypeDef *pdev );
- /* Class Specific Endpoints*/
- uint8_t (*DataIn) (struct _USBD_HandleTypeDef *pdev , uint8_t epnum);
- uint8_t (*DataOut) (struct _USBD_HandleTypeDef *pdev , uint8_t epnum);
- uint8_t (*SOF) (struct _USBD_HandleTypeDef *pdev);
- uint8_t (*IsoINIncomplete) (struct _USBD_HandleTypeDef *pdev , uint8_t epnum);
- uint8_t (*IsoOUTIncomplete) (struct _USBD_HandleTypeDef *pdev , uint8_t epnum);
-
- uint8_t *(*GetHSConfigDescriptor)(uint16_t *length);
- uint8_t *(*GetFSConfigDescriptor)(uint16_t *length);
- uint8_t *(*GetOtherSpeedConfigDescriptor)(uint16_t *length);
- uint8_t *(*GetDeviceQualifierDescriptor)(uint16_t *length);
-#if (USBD_SUPPORT_USER_STRING == 1)
- uint8_t *(*GetUsrStrDescriptor)(struct _USBD_HandleTypeDef *pdev ,uint8_t index, uint16_t *length);
-#endif
-
-} USBD_ClassTypeDef;
-
-/* Following USB Device Speed */
-typedef enum
-{
- USBD_SPEED_HIGH = 0,
- USBD_SPEED_FULL = 1,
- USBD_SPEED_LOW = 2,
-}USBD_SpeedTypeDef;
-
-/* Following USB Device status */
-typedef enum {
- USBD_OK = 0,
- USBD_BUSY,
- USBD_FAIL,
-}USBD_StatusTypeDef;
-
-/* USB Device descriptors structure */
-typedef struct
-{
- uint8_t *(*GetDeviceDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length);
- uint8_t *(*GetLangIDStrDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length);
- uint8_t *(*GetManufacturerStrDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length);
- uint8_t *(*GetProductStrDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length);
- uint8_t *(*GetSerialStrDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length);
- uint8_t *(*GetConfigurationStrDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length);
- uint8_t *(*GetInterfaceStrDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length);
-#if (USBD_LPM_ENABLED == 1)
- uint8_t *(*GetBOSDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length);
-#endif
-} USBD_DescriptorsTypeDef;
-
-/* USB Device handle structure */
-typedef struct
-{
- uint32_t status;
- uint32_t total_length;
- uint32_t rem_length;
- uint32_t maxpacket;
-} USBD_EndpointTypeDef;
-
-/* USB Device handle structure */
-typedef struct _USBD_HandleTypeDef
-{
- uint8_t id;
- uint32_t dev_config;
- uint32_t dev_default_config;
- uint32_t dev_config_status;
- USBD_SpeedTypeDef dev_speed;
- USBD_EndpointTypeDef ep_in[15];
- USBD_EndpointTypeDef ep_out[15];
- uint32_t ep0_state;
- uint32_t ep0_data_len;
- uint8_t dev_state;
- uint8_t dev_old_state;
- uint8_t dev_address;
- uint8_t dev_connection_status;
- uint8_t dev_test_mode;
- uint32_t dev_remote_wakeup;
-
- USBD_SetupReqTypedef request;
- USBD_DescriptorsTypeDef *pDesc;
- USBD_ClassTypeDef *pClass;
- void *pClassData;
- void *pUserData;
- void *pData;
-} USBD_HandleTypeDef;
-
-/**
- * @}
- */
-
-
-
-/** @defgroup USBD_DEF_Exported_Macros
- * @{
- */
-#define SWAPBYTE(addr) (((uint16_t)(*((uint8_t *)(addr)))) + \
- (((uint16_t)(*(((uint8_t *)(addr)) + 1))) << 8))
-
-#define LOBYTE(x) ((uint8_t)(x & 0x00FF))
-#define HIBYTE(x) ((uint8_t)((x & 0xFF00) >>8))
-#define MIN(a, b) (((a) < (b)) ? (a) : (b))
-#define MAX(a, b) (((a) > (b)) ? (a) : (b))
-
-
-#if defined ( __GNUC__ )
- #ifndef __weak
- #define __weak __attribute__((weak))
- #endif /* __weak */
- #ifndef __packed
- #define __packed __attribute__((__packed__))
- #endif /* __packed */
-#endif /* __GNUC__ */
-
-
-/* In HS mode and when the DMA is used, all variables and data structures dealing
- with the DMA during the transaction process should be 4-bytes aligned */
-
-#if defined (__GNUC__) /* GNU Compiler */
- #define __ALIGN_END __attribute__ ((aligned (4)))
- #define __ALIGN_BEGIN
-#else
- #define __ALIGN_END
- #if defined (__CC_ARM) /* ARM Compiler */
- #define __ALIGN_BEGIN __align(4)
- #elif defined (__ICCARM__) /* IAR Compiler */
- #define __ALIGN_BEGIN
- #elif defined (__TASKING__) /* TASKING Compiler */
- #define __ALIGN_BEGIN __align(4)
- #endif /* __CC_ARM */
-#endif /* __GNUC__ */
-
-
-/**
- * @}
- */
-
-/** @defgroup USBD_DEF_Exported_Variables
- * @{
- */
-
-/**
- * @}
- */
-
-/** @defgroup USBD_DEF_Exported_FunctionsPrototype
- * @{
- */
-
-/**
- * @}
- */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __USBD_DEF_H */
-
-/**
- * @}
- */
-
-/**
-* @}
-*/
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/fw/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ioreq.h b/fw/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ioreq.h deleted file mode 100644 index dbf8ca1..0000000 --- a/fw/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ioreq.h +++ /dev/null @@ -1,128 +0,0 @@ -/**
- ******************************************************************************
- * @file usbd_ioreq.h
- * @author MCD Application Team
- * @version V2.4.2
- * @date 11-December-2015
- * @brief Header file for the usbd_ioreq.c file
- ******************************************************************************
- * @attention
- *
- * <h2><center>© COPYRIGHT 2015 STMicroelectronics</center></h2>
- *
- * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
- * You may not use this file except in compliance with the License.
- * You may obtain a copy of the License at:
- *
- * http://www.st.com/software_license_agreement_liberty_v2
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __USBD_IOREQ_H
-#define __USBD_IOREQ_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "usbd_def.h"
-#include "usbd_core.h"
-
-/** @addtogroup STM32_USB_DEVICE_LIBRARY
- * @{
- */
-
-/** @defgroup USBD_IOREQ
- * @brief header file for the usbd_ioreq.c file
- * @{
- */
-
-/** @defgroup USBD_IOREQ_Exported_Defines
- * @{
- */
-/**
- * @}
- */
-
-
-/** @defgroup USBD_IOREQ_Exported_Types
- * @{
- */
-
-
-/**
- * @}
- */
-
-
-
-/** @defgroup USBD_IOREQ_Exported_Macros
- * @{
- */
-
-/**
- * @}
- */
-
-/** @defgroup USBD_IOREQ_Exported_Variables
- * @{
- */
-
-/**
- * @}
- */
-
-/** @defgroup USBD_IOREQ_Exported_FunctionsPrototype
- * @{
- */
-
-USBD_StatusTypeDef USBD_CtlSendData (USBD_HandleTypeDef *pdev,
- uint8_t *buf,
- uint16_t len);
-
-USBD_StatusTypeDef USBD_CtlContinueSendData (USBD_HandleTypeDef *pdev,
- uint8_t *pbuf,
- uint16_t len);
-
-USBD_StatusTypeDef USBD_CtlPrepareRx (USBD_HandleTypeDef *pdev,
- uint8_t *pbuf,
- uint16_t len);
-
-USBD_StatusTypeDef USBD_CtlContinueRx (USBD_HandleTypeDef *pdev,
- uint8_t *pbuf,
- uint16_t len);
-
-USBD_StatusTypeDef USBD_CtlSendStatus (USBD_HandleTypeDef *pdev);
-
-USBD_StatusTypeDef USBD_CtlReceiveStatus (USBD_HandleTypeDef *pdev);
-
-uint16_t USBD_GetRxCount (USBD_HandleTypeDef *pdev ,
- uint8_t epnum);
-
-/**
- * @}
- */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __USBD_IOREQ_H */
-
-/**
- * @}
- */
-
-/**
-* @}
-*/
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/fw/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.c b/fw/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.c deleted file mode 100644 index 86fc2de..0000000 --- a/fw/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.c +++ /dev/null @@ -1,565 +0,0 @@ -/**
- ******************************************************************************
- * @file usbd_core.c
- * @author MCD Application Team
- * @version V2.4.2
- * @date 11-December-2015
- * @brief This file provides all the USBD core functions.
- ******************************************************************************
- * @attention
- *
- * <h2><center>© COPYRIGHT 2015 STMicroelectronics</center></h2>
- *
- * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
- * You may not use this file except in compliance with the License.
- * You may obtain a copy of the License at:
- *
- * http://www.st.com/software_license_agreement_liberty_v2
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "usbd_core.h"
-
-/** @addtogroup STM32_USBD_DEVICE_LIBRARY
-* @{
-*/
-
-
-/** @defgroup USBD_CORE
-* @brief usbd core module
-* @{
-*/
-
-/** @defgroup USBD_CORE_Private_TypesDefinitions
-* @{
-*/
-/**
-* @}
-*/
-
-
-/** @defgroup USBD_CORE_Private_Defines
-* @{
-*/
-
-/**
-* @}
-*/
-
-
-/** @defgroup USBD_CORE_Private_Macros
-* @{
-*/
-/**
-* @}
-*/
-
-
-
-
-/** @defgroup USBD_CORE_Private_FunctionPrototypes
-* @{
-*/
-
-/**
-* @}
-*/
-
-/** @defgroup USBD_CORE_Private_Variables
-* @{
-*/
-
-/**
-* @}
-*/
-
-/** @defgroup USBD_CORE_Private_Functions
-* @{
-*/
-
-/**
-* @brief USBD_Init
-* Initializes the device stack and load the class driver
-* @param pdev: device instance
-* @param pdesc: Descriptor structure address
-* @param id: Low level core index
-* @retval None
-*/
-USBD_StatusTypeDef USBD_Init(USBD_HandleTypeDef *pdev, USBD_DescriptorsTypeDef *pdesc, uint8_t id)
-{
- /* Check whether the USB Host handle is valid */
- if(pdev == NULL)
- {
- USBD_ErrLog("Invalid Device handle");
- return USBD_FAIL;
- }
-
- /* Unlink previous class*/
- if(pdev->pClass != NULL)
- {
- pdev->pClass = NULL;
- }
-
- /* Assign USBD Descriptors */
- if(pdesc != NULL)
- {
- pdev->pDesc = pdesc;
- }
-
- /* Set Device initial State */
- pdev->dev_state = USBD_STATE_DEFAULT;
- pdev->id = id;
- /* Initialize low level driver */
- USBD_LL_Init(pdev);
-
- return USBD_OK;
-}
-
-/**
-* @brief USBD_DeInit
-* Re-Initialize th device library
-* @param pdev: device instance
-* @retval status: status
-*/
-USBD_StatusTypeDef USBD_DeInit(USBD_HandleTypeDef *pdev)
-{
- /* Set Default State */
- pdev->dev_state = USBD_STATE_DEFAULT;
-
- /* Free Class Resources */
- pdev->pClass->DeInit(pdev, pdev->dev_config);
-
- /* Stop the low level driver */
- USBD_LL_Stop(pdev);
-
- /* Initialize low level driver */
- USBD_LL_DeInit(pdev);
-
- return USBD_OK;
-}
-
-
-/**
- * @brief USBD_RegisterClass
- * Link class driver to Device Core.
- * @param pDevice : Device Handle
- * @param pclass: Class handle
- * @retval USBD Status
- */
-USBD_StatusTypeDef USBD_RegisterClass(USBD_HandleTypeDef *pdev, USBD_ClassTypeDef *pclass)
-{
- USBD_StatusTypeDef status = USBD_OK;
- if(pclass != 0)
- {
- /* link the class to the USB Device handle */
- pdev->pClass = pclass;
- status = USBD_OK;
- }
- else
- {
- USBD_ErrLog("Invalid Class handle");
- status = USBD_FAIL;
- }
-
- return status;
-}
-
-/**
- * @brief USBD_Start
- * Start the USB Device Core.
- * @param pdev: Device Handle
- * @retval USBD Status
- */
-USBD_StatusTypeDef USBD_Start (USBD_HandleTypeDef *pdev)
-{
-
- /* Start the low level driver */
- USBD_LL_Start(pdev);
-
- return USBD_OK;
-}
-
-/**
- * @brief USBD_Stop
- * Stop the USB Device Core.
- * @param pdev: Device Handle
- * @retval USBD Status
- */
-USBD_StatusTypeDef USBD_Stop (USBD_HandleTypeDef *pdev)
-{
- /* Free Class Resources */
- pdev->pClass->DeInit(pdev, pdev->dev_config);
-
- /* Stop the low level driver */
- USBD_LL_Stop(pdev);
-
- return USBD_OK;
-}
-
-/**
-* @brief USBD_RunTestMode
-* Launch test mode process
-* @param pdev: device instance
-* @retval status
-*/
-USBD_StatusTypeDef USBD_RunTestMode (USBD_HandleTypeDef *pdev)
-{
- return USBD_OK;
-}
-
-
-/**
-* @brief USBD_SetClassConfig
-* Configure device and start the interface
-* @param pdev: device instance
-* @param cfgidx: configuration index
-* @retval status
-*/
-
-USBD_StatusTypeDef USBD_SetClassConfig(USBD_HandleTypeDef *pdev, uint8_t cfgidx)
-{
- USBD_StatusTypeDef ret = USBD_FAIL;
-
- if(pdev->pClass != NULL)
- {
- /* Set configuration and Start the Class*/
- if(pdev->pClass->Init(pdev, cfgidx) == 0)
- {
- ret = USBD_OK;
- }
- }
- return ret;
-}
-
-/**
-* @brief USBD_ClrClassConfig
-* Clear current configuration
-* @param pdev: device instance
-* @param cfgidx: configuration index
-* @retval status: USBD_StatusTypeDef
-*/
-USBD_StatusTypeDef USBD_ClrClassConfig(USBD_HandleTypeDef *pdev, uint8_t cfgidx)
-{
- /* Clear configuration and De-initialize the Class process*/
- pdev->pClass->DeInit(pdev, cfgidx);
- return USBD_OK;
-}
-
-
-/**
-* @brief USBD_SetupStage
-* Handle the setup stage
-* @param pdev: device instance
-* @retval status
-*/
-USBD_StatusTypeDef USBD_LL_SetupStage(USBD_HandleTypeDef *pdev, uint8_t *psetup)
-{
-
- USBD_ParseSetupRequest(&pdev->request, psetup);
-
- pdev->ep0_state = USBD_EP0_SETUP;
- pdev->ep0_data_len = pdev->request.wLength;
-
- switch (pdev->request.bmRequest & 0x1F)
- {
- case USB_REQ_RECIPIENT_DEVICE:
- USBD_StdDevReq (pdev, &pdev->request);
- break;
-
- case USB_REQ_RECIPIENT_INTERFACE:
- USBD_StdItfReq(pdev, &pdev->request);
- break;
-
- case USB_REQ_RECIPIENT_ENDPOINT:
- USBD_StdEPReq(pdev, &pdev->request);
- break;
-
- default:
- USBD_LL_StallEP(pdev , pdev->request.bmRequest & 0x80);
- break;
- }
- return USBD_OK;
-}
-
-/**
-* @brief USBD_DataOutStage
-* Handle data OUT stage
-* @param pdev: device instance
-* @param epnum: endpoint index
-* @retval status
-*/
-USBD_StatusTypeDef USBD_LL_DataOutStage(USBD_HandleTypeDef *pdev , uint8_t epnum, uint8_t *pdata)
-{
- USBD_EndpointTypeDef *pep;
-
- if(epnum == 0)
- {
- pep = &pdev->ep_out[0];
-
- if ( pdev->ep0_state == USBD_EP0_DATA_OUT)
- {
- if(pep->rem_length > pep->maxpacket)
- {
- pep->rem_length -= pep->maxpacket;
-
- USBD_CtlContinueRx (pdev,
- pdata,
- MIN(pep->rem_length ,pep->maxpacket));
- }
- else
- {
- if((pdev->pClass->EP0_RxReady != NULL)&&
- (pdev->dev_state == USBD_STATE_CONFIGURED))
- {
- pdev->pClass->EP0_RxReady(pdev);
- }
- USBD_CtlSendStatus(pdev);
- }
- }
- }
- else if((pdev->pClass->DataOut != NULL)&&
- (pdev->dev_state == USBD_STATE_CONFIGURED))
- {
- pdev->pClass->DataOut(pdev, epnum);
- }
- return USBD_OK;
-}
-
-/**
-* @brief USBD_DataInStage
-* Handle data in stage
-* @param pdev: device instance
-* @param epnum: endpoint index
-* @retval status
-*/
-USBD_StatusTypeDef USBD_LL_DataInStage(USBD_HandleTypeDef *pdev ,uint8_t epnum, uint8_t *pdata)
-{
- USBD_EndpointTypeDef *pep;
-
- if(epnum == 0)
- {
- pep = &pdev->ep_in[0];
-
- if ( pdev->ep0_state == USBD_EP0_DATA_IN)
- {
- if(pep->rem_length > pep->maxpacket)
- {
- pep->rem_length -= pep->maxpacket;
-
- USBD_CtlContinueSendData (pdev,
- pdata,
- pep->rem_length);
-
- /* Prepare endpoint for premature end of transfer */
- USBD_LL_PrepareReceive (pdev,
- 0,
- NULL,
- 0);
- }
- else
- { /* last packet is MPS multiple, so send ZLP packet */
- if((pep->total_length % pep->maxpacket == 0) &&
- (pep->total_length >= pep->maxpacket) &&
- (pep->total_length < pdev->ep0_data_len ))
- {
-
- USBD_CtlContinueSendData(pdev , NULL, 0);
- pdev->ep0_data_len = 0;
-
- /* Prepare endpoint for premature end of transfer */
- USBD_LL_PrepareReceive (pdev,
- 0,
- NULL,
- 0);
- }
- else
- {
- if((pdev->pClass->EP0_TxSent != NULL)&&
- (pdev->dev_state == USBD_STATE_CONFIGURED))
- {
- pdev->pClass->EP0_TxSent(pdev);
- }
- USBD_CtlReceiveStatus(pdev);
- }
- }
- }
- if (pdev->dev_test_mode == 1)
- {
- USBD_RunTestMode(pdev);
- pdev->dev_test_mode = 0;
- }
- }
- else if((pdev->pClass->DataIn != NULL)&&
- (pdev->dev_state == USBD_STATE_CONFIGURED))
- {
- pdev->pClass->DataIn(pdev, epnum);
- }
- return USBD_OK;
-}
-
-/**
-* @brief USBD_LL_Reset
-* Handle Reset event
-* @param pdev: device instance
-* @retval status
-*/
-
-USBD_StatusTypeDef USBD_LL_Reset(USBD_HandleTypeDef *pdev)
-{
- /* Open EP0 OUT */
- USBD_LL_OpenEP(pdev,
- 0x00,
- USBD_EP_TYPE_CTRL,
- USB_MAX_EP0_SIZE);
-
- pdev->ep_out[0].maxpacket = USB_MAX_EP0_SIZE;
-
- /* Open EP0 IN */
- USBD_LL_OpenEP(pdev,
- 0x80,
- USBD_EP_TYPE_CTRL,
- USB_MAX_EP0_SIZE);
-
- pdev->ep_in[0].maxpacket = USB_MAX_EP0_SIZE;
- /* Upon Reset call user call back */
- pdev->dev_state = USBD_STATE_DEFAULT;
-
- if (pdev->pClassData)
- pdev->pClass->DeInit(pdev, pdev->dev_config);
-
-
- return USBD_OK;
-}
-
-
-
-
-/**
-* @brief USBD_LL_Reset
-* Handle Reset event
-* @param pdev: device instance
-* @retval status
-*/
-USBD_StatusTypeDef USBD_LL_SetSpeed(USBD_HandleTypeDef *pdev, USBD_SpeedTypeDef speed)
-{
- pdev->dev_speed = speed;
- return USBD_OK;
-}
-
-/**
-* @brief USBD_Suspend
-* Handle Suspend event
-* @param pdev: device instance
-* @retval status
-*/
-
-USBD_StatusTypeDef USBD_LL_Suspend(USBD_HandleTypeDef *pdev)
-{
- pdev->dev_old_state = pdev->dev_state;
- pdev->dev_state = USBD_STATE_SUSPENDED;
- return USBD_OK;
-}
-
-/**
-* @brief USBD_Resume
-* Handle Resume event
-* @param pdev: device instance
-* @retval status
-*/
-
-USBD_StatusTypeDef USBD_LL_Resume(USBD_HandleTypeDef *pdev)
-{
- pdev->dev_state = pdev->dev_old_state;
- return USBD_OK;
-}
-
-/**
-* @brief USBD_SOF
-* Handle SOF event
-* @param pdev: device instance
-* @retval status
-*/
-
-USBD_StatusTypeDef USBD_LL_SOF(USBD_HandleTypeDef *pdev)
-{
- if(pdev->dev_state == USBD_STATE_CONFIGURED)
- {
- if(pdev->pClass->SOF != NULL)
- {
- pdev->pClass->SOF(pdev);
- }
- }
- return USBD_OK;
-}
-
-/**
-* @brief USBD_IsoINIncomplete
-* Handle iso in incomplete event
-* @param pdev: device instance
-* @retval status
-*/
-USBD_StatusTypeDef USBD_LL_IsoINIncomplete(USBD_HandleTypeDef *pdev, uint8_t epnum)
-{
- return USBD_OK;
-}
-
-/**
-* @brief USBD_IsoOUTIncomplete
-* Handle iso out incomplete event
-* @param pdev: device instance
-* @retval status
-*/
-USBD_StatusTypeDef USBD_LL_IsoOUTIncomplete(USBD_HandleTypeDef *pdev, uint8_t epnum)
-{
- return USBD_OK;
-}
-
-/**
-* @brief USBD_DevConnected
-* Handle device connection event
-* @param pdev: device instance
-* @retval status
-*/
-USBD_StatusTypeDef USBD_LL_DevConnected(USBD_HandleTypeDef *pdev)
-{
- return USBD_OK;
-}
-
-/**
-* @brief USBD_DevDisconnected
-* Handle device disconnection event
-* @param pdev: device instance
-* @retval status
-*/
-USBD_StatusTypeDef USBD_LL_DevDisconnected(USBD_HandleTypeDef *pdev)
-{
- /* Free Class Resources */
- pdev->dev_state = USBD_STATE_DEFAULT;
- pdev->pClass->DeInit(pdev, pdev->dev_config);
-
- return USBD_OK;
-}
-/**
-* @}
-*/
-
-
-/**
-* @}
-*/
-
-
-/**
-* @}
-*/
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
-
diff --git a/fw/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.c b/fw/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.c deleted file mode 100644 index 7701a6d..0000000 --- a/fw/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.c +++ /dev/null @@ -1,782 +0,0 @@ -/**
- ******************************************************************************
- * @file usbd_req.c
- * @author MCD Application Team
- * @version V2.4.2
- * @date 11-December-2015
- * @brief This file provides the standard USB requests following chapter 9.
- ******************************************************************************
- * @attention
- *
- * <h2><center>© COPYRIGHT 2015 STMicroelectronics</center></h2>
- *
- * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
- * You may not use this file except in compliance with the License.
- * You may obtain a copy of the License at:
- *
- * http://www.st.com/software_license_agreement_liberty_v2
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "usbd_ctlreq.h"
-#include "usbd_ioreq.h"
-
-
-/** @addtogroup STM32_USBD_STATE_DEVICE_LIBRARY
- * @{
- */
-
-
-/** @defgroup USBD_REQ
- * @brief USB standard requests module
- * @{
- */
-
-/** @defgroup USBD_REQ_Private_TypesDefinitions
- * @{
- */
-/**
- * @}
- */
-
-
-/** @defgroup USBD_REQ_Private_Defines
- * @{
- */
-
-/**
- * @}
- */
-
-
-/** @defgroup USBD_REQ_Private_Macros
- * @{
- */
-/**
- * @}
- */
-
-
-/** @defgroup USBD_REQ_Private_Variables
- * @{
- */
-/**
- * @}
- */
-
-
-/** @defgroup USBD_REQ_Private_FunctionPrototypes
- * @{
- */
-static void USBD_GetDescriptor(USBD_HandleTypeDef *pdev ,
- USBD_SetupReqTypedef *req);
-
-static void USBD_SetAddress(USBD_HandleTypeDef *pdev ,
- USBD_SetupReqTypedef *req);
-
-static void USBD_SetConfig(USBD_HandleTypeDef *pdev ,
- USBD_SetupReqTypedef *req);
-
-static void USBD_GetConfig(USBD_HandleTypeDef *pdev ,
- USBD_SetupReqTypedef *req);
-
-static void USBD_GetStatus(USBD_HandleTypeDef *pdev ,
- USBD_SetupReqTypedef *req);
-
-static void USBD_SetFeature(USBD_HandleTypeDef *pdev ,
- USBD_SetupReqTypedef *req);
-
-static void USBD_ClrFeature(USBD_HandleTypeDef *pdev ,
- USBD_SetupReqTypedef *req);
-
-static uint8_t USBD_GetLen(uint8_t *buf);
-
-/**
- * @}
- */
-
-
-/** @defgroup USBD_REQ_Private_Functions
- * @{
- */
-
-
-/**
-* @brief USBD_StdDevReq
-* Handle standard usb device requests
-* @param pdev: device instance
-* @param req: usb request
-* @retval status
-*/
-USBD_StatusTypeDef USBD_StdDevReq (USBD_HandleTypeDef *pdev , USBD_SetupReqTypedef *req)
-{
- USBD_StatusTypeDef ret = USBD_OK;
-
- switch (req->bRequest)
- {
- case USB_REQ_GET_DESCRIPTOR:
-
- USBD_GetDescriptor (pdev, req) ;
- break;
-
- case USB_REQ_SET_ADDRESS:
- USBD_SetAddress(pdev, req);
- break;
-
- case USB_REQ_SET_CONFIGURATION:
- USBD_SetConfig (pdev , req);
- break;
-
- case USB_REQ_GET_CONFIGURATION:
- USBD_GetConfig (pdev , req);
- break;
-
- case USB_REQ_GET_STATUS:
- USBD_GetStatus (pdev , req);
- break;
-
-
- case USB_REQ_SET_FEATURE:
- USBD_SetFeature (pdev , req);
- break;
-
- case USB_REQ_CLEAR_FEATURE:
- USBD_ClrFeature (pdev , req);
- break;
-
- default:
- USBD_CtlError(pdev , req);
- break;
- }
-
- return ret;
-}
-
-/**
-* @brief USBD_StdItfReq
-* Handle standard usb interface requests
-* @param pdev: device instance
-* @param req: usb request
-* @retval status
-*/
-USBD_StatusTypeDef USBD_StdItfReq (USBD_HandleTypeDef *pdev , USBD_SetupReqTypedef *req)
-{
- USBD_StatusTypeDef ret = USBD_OK;
-
- switch (pdev->dev_state)
- {
- case USBD_STATE_CONFIGURED:
-
- if (LOBYTE(req->wIndex) <= USBD_MAX_NUM_INTERFACES)
- {
- pdev->pClass->Setup (pdev, req);
-
- if((req->wLength == 0)&& (ret == USBD_OK))
- {
- USBD_CtlSendStatus(pdev);
- }
- }
- else
- {
- USBD_CtlError(pdev , req);
- }
- break;
-
- default:
- USBD_CtlError(pdev , req);
- break;
- }
- return USBD_OK;
-}
-
-/**
-* @brief USBD_StdEPReq
-* Handle standard usb endpoint requests
-* @param pdev: device instance
-* @param req: usb request
-* @retval status
-*/
-USBD_StatusTypeDef USBD_StdEPReq (USBD_HandleTypeDef *pdev , USBD_SetupReqTypedef *req)
-{
-
- uint8_t ep_addr;
- USBD_StatusTypeDef ret = USBD_OK;
- USBD_EndpointTypeDef *pep;
- ep_addr = LOBYTE(req->wIndex);
-
- /* Check if it is a class request */
- if ((req->bmRequest & 0x60) == 0x20)
- {
- pdev->pClass->Setup (pdev, req);
-
- return USBD_OK;
- }
-
- switch (req->bRequest)
- {
-
- case USB_REQ_SET_FEATURE :
-
- switch (pdev->dev_state)
- {
- case USBD_STATE_ADDRESSED:
- if ((ep_addr != 0x00) && (ep_addr != 0x80))
- {
- USBD_LL_StallEP(pdev , ep_addr);
- }
- break;
-
- case USBD_STATE_CONFIGURED:
- if (req->wValue == USB_FEATURE_EP_HALT)
- {
- if ((ep_addr != 0x00) && (ep_addr != 0x80))
- {
- USBD_LL_StallEP(pdev , ep_addr);
-
- }
- }
- pdev->pClass->Setup (pdev, req);
- USBD_CtlSendStatus(pdev);
-
- break;
-
- default:
- USBD_CtlError(pdev , req);
- break;
- }
- break;
-
- case USB_REQ_CLEAR_FEATURE :
-
- switch (pdev->dev_state)
- {
- case USBD_STATE_ADDRESSED:
- if ((ep_addr != 0x00) && (ep_addr != 0x80))
- {
- USBD_LL_StallEP(pdev , ep_addr);
- }
- break;
-
- case USBD_STATE_CONFIGURED:
- if (req->wValue == USB_FEATURE_EP_HALT)
- {
- if ((ep_addr & 0x7F) != 0x00)
- {
- USBD_LL_ClearStallEP(pdev , ep_addr);
- pdev->pClass->Setup (pdev, req);
- }
- USBD_CtlSendStatus(pdev);
- }
- break;
-
- default:
- USBD_CtlError(pdev , req);
- break;
- }
- break;
-
- case USB_REQ_GET_STATUS:
- switch (pdev->dev_state)
- {
- case USBD_STATE_ADDRESSED:
- if ((ep_addr & 0x7F) != 0x00)
- {
- USBD_LL_StallEP(pdev , ep_addr);
- }
- break;
-
- case USBD_STATE_CONFIGURED:
- pep = ((ep_addr & 0x80) == 0x80) ? &pdev->ep_in[ep_addr & 0x7F]:\
- &pdev->ep_out[ep_addr & 0x7F];
- if(USBD_LL_IsStallEP(pdev, ep_addr))
- {
- pep->status = 0x0001;
- }
- else
- {
- pep->status = 0x0000;
- }
-
- USBD_CtlSendData (pdev,
- (uint8_t *)&pep->status,
- 2);
- break;
-
- default:
- USBD_CtlError(pdev , req);
- break;
- }
- break;
-
- default:
- break;
- }
- return ret;
-}
-/**
-* @brief USBD_GetDescriptor
-* Handle Get Descriptor requests
-* @param pdev: device instance
-* @param req: usb request
-* @retval status
-*/
-static void USBD_GetDescriptor(USBD_HandleTypeDef *pdev ,
- USBD_SetupReqTypedef *req)
-{
- uint16_t len;
- uint8_t *pbuf;
-
-
- switch (req->wValue >> 8)
- {
-#if (USBD_LPM_ENABLED == 1)
- case USB_DESC_TYPE_BOS:
- pbuf = pdev->pDesc->GetBOSDescriptor(pdev->dev_speed, &len);
- break;
-#endif
- case USB_DESC_TYPE_DEVICE:
- pbuf = pdev->pDesc->GetDeviceDescriptor(pdev->dev_speed, &len);
- break;
-
- case USB_DESC_TYPE_CONFIGURATION:
- if(pdev->dev_speed == USBD_SPEED_HIGH )
- {
- pbuf = (uint8_t *)pdev->pClass->GetHSConfigDescriptor(&len);
- pbuf[1] = USB_DESC_TYPE_CONFIGURATION;
- }
- else
- {
- pbuf = (uint8_t *)pdev->pClass->GetFSConfigDescriptor(&len);
- pbuf[1] = USB_DESC_TYPE_CONFIGURATION;
- }
- break;
-
- case USB_DESC_TYPE_STRING:
- switch ((uint8_t)(req->wValue))
- {
- case USBD_IDX_LANGID_STR:
- pbuf = pdev->pDesc->GetLangIDStrDescriptor(pdev->dev_speed, &len);
- break;
-
- case USBD_IDX_MFC_STR:
- pbuf = pdev->pDesc->GetManufacturerStrDescriptor(pdev->dev_speed, &len);
- break;
-
- case USBD_IDX_PRODUCT_STR:
- pbuf = pdev->pDesc->GetProductStrDescriptor(pdev->dev_speed, &len);
- break;
-
- case USBD_IDX_SERIAL_STR:
- pbuf = pdev->pDesc->GetSerialStrDescriptor(pdev->dev_speed, &len);
- break;
-
- case USBD_IDX_CONFIG_STR:
- pbuf = pdev->pDesc->GetConfigurationStrDescriptor(pdev->dev_speed, &len);
- break;
-
- case USBD_IDX_INTERFACE_STR:
- pbuf = pdev->pDesc->GetInterfaceStrDescriptor(pdev->dev_speed, &len);
- break;
-
- default:
-#if (USBD_SUPPORT_USER_STRING == 1)
- pbuf = pdev->pClass->GetUsrStrDescriptor(pdev, (req->wValue) , &len);
- break;
-#else
- USBD_CtlError(pdev , req);
- return;
-#endif
- }
- break;
- case USB_DESC_TYPE_DEVICE_QUALIFIER:
-
- if(pdev->dev_speed == USBD_SPEED_HIGH )
- {
- pbuf = (uint8_t *)pdev->pClass->GetDeviceQualifierDescriptor(&len);
- break;
- }
- else
- {
- USBD_CtlError(pdev , req);
- return;
- }
-
- case USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION:
- if(pdev->dev_speed == USBD_SPEED_HIGH )
- {
- pbuf = (uint8_t *)pdev->pClass->GetOtherSpeedConfigDescriptor(&len);
- pbuf[1] = USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION;
- break;
- }
- else
- {
- USBD_CtlError(pdev , req);
- return;
- }
-
- default:
- USBD_CtlError(pdev , req);
- return;
- }
-
- if((len != 0)&& (req->wLength != 0))
- {
-
- len = MIN(len , req->wLength);
-
- USBD_CtlSendData (pdev,
- pbuf,
- len);
- }
-
-}
-
-/**
-* @brief USBD_SetAddress
-* Set device address
-* @param pdev: device instance
-* @param req: usb request
-* @retval status
-*/
-static void USBD_SetAddress(USBD_HandleTypeDef *pdev ,
- USBD_SetupReqTypedef *req)
-{
- uint8_t dev_addr;
-
- if ((req->wIndex == 0) && (req->wLength == 0))
- {
- dev_addr = (uint8_t)(req->wValue) & 0x7F;
-
- if (pdev->dev_state == USBD_STATE_CONFIGURED)
- {
- USBD_CtlError(pdev , req);
- }
- else
- {
- pdev->dev_address = dev_addr;
- USBD_LL_SetUSBAddress(pdev, dev_addr);
- USBD_CtlSendStatus(pdev);
-
- if (dev_addr != 0)
- {
- pdev->dev_state = USBD_STATE_ADDRESSED;
- }
- else
- {
- pdev->dev_state = USBD_STATE_DEFAULT;
- }
- }
- }
- else
- {
- USBD_CtlError(pdev , req);
- }
-}
-
-/**
-* @brief USBD_SetConfig
-* Handle Set device configuration request
-* @param pdev: device instance
-* @param req: usb request
-* @retval status
-*/
-static void USBD_SetConfig(USBD_HandleTypeDef *pdev ,
- USBD_SetupReqTypedef *req)
-{
-
- static uint8_t cfgidx;
-
- cfgidx = (uint8_t)(req->wValue);
-
- if (cfgidx > USBD_MAX_NUM_CONFIGURATION )
- {
- USBD_CtlError(pdev , req);
- }
- else
- {
- switch (pdev->dev_state)
- {
- case USBD_STATE_ADDRESSED:
- if (cfgidx)
- {
- pdev->dev_config = cfgidx;
- pdev->dev_state = USBD_STATE_CONFIGURED;
- if(USBD_SetClassConfig(pdev , cfgidx) == USBD_FAIL)
- {
- USBD_CtlError(pdev , req);
- return;
- }
- USBD_CtlSendStatus(pdev);
- }
- else
- {
- USBD_CtlSendStatus(pdev);
- }
- break;
-
- case USBD_STATE_CONFIGURED:
- if (cfgidx == 0)
- {
- pdev->dev_state = USBD_STATE_ADDRESSED;
- pdev->dev_config = cfgidx;
- USBD_ClrClassConfig(pdev , cfgidx);
- USBD_CtlSendStatus(pdev);
-
- }
- else if (cfgidx != pdev->dev_config)
- {
- /* Clear old configuration */
- USBD_ClrClassConfig(pdev , pdev->dev_config);
-
- /* set new configuration */
- pdev->dev_config = cfgidx;
- if(USBD_SetClassConfig(pdev , cfgidx) == USBD_FAIL)
- {
- USBD_CtlError(pdev , req);
- return;
- }
- USBD_CtlSendStatus(pdev);
- }
- else
- {
- USBD_CtlSendStatus(pdev);
- }
- break;
-
- default:
- USBD_CtlError(pdev , req);
- break;
- }
- }
-}
-
-/**
-* @brief USBD_GetConfig
-* Handle Get device configuration request
-* @param pdev: device instance
-* @param req: usb request
-* @retval status
-*/
-static void USBD_GetConfig(USBD_HandleTypeDef *pdev ,
- USBD_SetupReqTypedef *req)
-{
-
- if (req->wLength != 1)
- {
- USBD_CtlError(pdev , req);
- }
- else
- {
- switch (pdev->dev_state )
- {
- case USBD_STATE_ADDRESSED:
- pdev->dev_default_config = 0;
- USBD_CtlSendData (pdev,
- (uint8_t *)&pdev->dev_default_config,
- 1);
- break;
-
- case USBD_STATE_CONFIGURED:
-
- USBD_CtlSendData (pdev,
- (uint8_t *)&pdev->dev_config,
- 1);
- break;
-
- default:
- USBD_CtlError(pdev , req);
- break;
- }
- }
-}
-
-/**
-* @brief USBD_GetStatus
-* Handle Get Status request
-* @param pdev: device instance
-* @param req: usb request
-* @retval status
-*/
-static void USBD_GetStatus(USBD_HandleTypeDef *pdev ,
- USBD_SetupReqTypedef *req)
-{
-
-
- switch (pdev->dev_state)
- {
- case USBD_STATE_ADDRESSED:
- case USBD_STATE_CONFIGURED:
-
-#if ( USBD_SELF_POWERED == 1)
- pdev->dev_config_status = USB_CONFIG_SELF_POWERED;
-#else
- pdev->dev_config_status = 0;
-#endif
-
- if (pdev->dev_remote_wakeup)
- {
- pdev->dev_config_status |= USB_CONFIG_REMOTE_WAKEUP;
- }
-
- USBD_CtlSendData (pdev,
- (uint8_t *)& pdev->dev_config_status,
- 2);
- break;
-
- default :
- USBD_CtlError(pdev , req);
- break;
- }
-}
-
-
-/**
-* @brief USBD_SetFeature
-* Handle Set device feature request
-* @param pdev: device instance
-* @param req: usb request
-* @retval status
-*/
-static void USBD_SetFeature(USBD_HandleTypeDef *pdev ,
- USBD_SetupReqTypedef *req)
-{
-
- if (req->wValue == USB_FEATURE_REMOTE_WAKEUP)
- {
- pdev->dev_remote_wakeup = 1;
- pdev->pClass->Setup (pdev, req);
- USBD_CtlSendStatus(pdev);
- }
-
-}
-
-
-/**
-* @brief USBD_ClrFeature
-* Handle clear device feature request
-* @param pdev: device instance
-* @param req: usb request
-* @retval status
-*/
-static void USBD_ClrFeature(USBD_HandleTypeDef *pdev ,
- USBD_SetupReqTypedef *req)
-{
- switch (pdev->dev_state)
- {
- case USBD_STATE_ADDRESSED:
- case USBD_STATE_CONFIGURED:
- if (req->wValue == USB_FEATURE_REMOTE_WAKEUP)
- {
- pdev->dev_remote_wakeup = 0;
- pdev->pClass->Setup (pdev, req);
- USBD_CtlSendStatus(pdev);
- }
- break;
-
- default :
- USBD_CtlError(pdev , req);
- break;
- }
-}
-
-/**
-* @brief USBD_ParseSetupRequest
-* Copy buffer into setup structure
-* @param pdev: device instance
-* @param req: usb request
-* @retval None
-*/
-
-void USBD_ParseSetupRequest(USBD_SetupReqTypedef *req, uint8_t *pdata)
-{
- req->bmRequest = *(uint8_t *) (pdata);
- req->bRequest = *(uint8_t *) (pdata + 1);
- req->wValue = SWAPBYTE (pdata + 2);
- req->wIndex = SWAPBYTE (pdata + 4);
- req->wLength = SWAPBYTE (pdata + 6);
-
-}
-
-/**
-* @brief USBD_CtlError
-* Handle USB low level Error
-* @param pdev: device instance
-* @param req: usb request
-* @retval None
-*/
-
-void USBD_CtlError( USBD_HandleTypeDef *pdev ,
- USBD_SetupReqTypedef *req)
-{
- USBD_LL_StallEP(pdev , 0x80);
- USBD_LL_StallEP(pdev , 0);
-}
-
-
-/**
- * @brief USBD_GetString
- * Convert Ascii string into unicode one
- * @param desc : descriptor buffer
- * @param unicode : Formatted string buffer (unicode)
- * @param len : descriptor length
- * @retval None
- */
-void USBD_GetString(uint8_t *desc, uint8_t *unicode, uint16_t *len)
-{
- uint8_t idx = 0;
-
- if (desc != NULL)
- {
- *len = USBD_GetLen(desc) * 2 + 2;
- unicode[idx++] = *len;
- unicode[idx++] = USB_DESC_TYPE_STRING;
-
- while (*desc != '\0')
- {
- unicode[idx++] = *desc++;
- unicode[idx++] = 0x00;
- }
- }
-}
-
-/**
- * @brief USBD_GetLen
- * return the string length
- * @param buf : pointer to the ascii string buffer
- * @retval string length
- */
-static uint8_t USBD_GetLen(uint8_t *buf)
-{
- uint8_t len = 0;
-
- while (*buf != '\0')
- {
- len++;
- buf++;
- }
-
- return len;
-}
-/**
- * @}
- */
-
-
-/**
- * @}
- */
-
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/fw/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.c b/fw/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.c deleted file mode 100644 index d66d777..0000000 --- a/fw/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.c +++ /dev/null @@ -1,236 +0,0 @@ -/**
- ******************************************************************************
- * @file usbd_ioreq.c
- * @author MCD Application Team
- * @version V2.4.2
- * @date 11-December-2015
- * @brief This file provides the IO requests APIs for control endpoints.
- ******************************************************************************
- * @attention
- *
- * <h2><center>© COPYRIGHT 2015 STMicroelectronics</center></h2>
- *
- * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
- * You may not use this file except in compliance with the License.
- * You may obtain a copy of the License at:
- *
- * http://www.st.com/software_license_agreement_liberty_v2
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "usbd_ioreq.h"
-
-/** @addtogroup STM32_USB_DEVICE_LIBRARY
- * @{
- */
-
-
-/** @defgroup USBD_IOREQ
- * @brief control I/O requests module
- * @{
- */
-
-/** @defgroup USBD_IOREQ_Private_TypesDefinitions
- * @{
- */
-/**
- * @}
- */
-
-
-/** @defgroup USBD_IOREQ_Private_Defines
- * @{
- */
-
-/**
- * @}
- */
-
-
-/** @defgroup USBD_IOREQ_Private_Macros
- * @{
- */
-/**
- * @}
- */
-
-
-/** @defgroup USBD_IOREQ_Private_Variables
- * @{
- */
-
-/**
- * @}
- */
-
-
-/** @defgroup USBD_IOREQ_Private_FunctionPrototypes
- * @{
- */
-/**
- * @}
- */
-
-
-/** @defgroup USBD_IOREQ_Private_Functions
- * @{
- */
-
-/**
-* @brief USBD_CtlSendData
-* send data on the ctl pipe
-* @param pdev: device instance
-* @param buff: pointer to data buffer
-* @param len: length of data to be sent
-* @retval status
-*/
-USBD_StatusTypeDef USBD_CtlSendData (USBD_HandleTypeDef *pdev,
- uint8_t *pbuf,
- uint16_t len)
-{
- /* Set EP0 State */
- pdev->ep0_state = USBD_EP0_DATA_IN;
- pdev->ep_in[0].total_length = len;
- pdev->ep_in[0].rem_length = len;
- /* Start the transfer */
- USBD_LL_Transmit (pdev, 0x00, pbuf, len);
-
- return USBD_OK;
-}
-
-/**
-* @brief USBD_CtlContinueSendData
-* continue sending data on the ctl pipe
-* @param pdev: device instance
-* @param buff: pointer to data buffer
-* @param len: length of data to be sent
-* @retval status
-*/
-USBD_StatusTypeDef USBD_CtlContinueSendData (USBD_HandleTypeDef *pdev,
- uint8_t *pbuf,
- uint16_t len)
-{
- /* Start the next transfer */
- USBD_LL_Transmit (pdev, 0x00, pbuf, len);
-
- return USBD_OK;
-}
-
-/**
-* @brief USBD_CtlPrepareRx
-* receive data on the ctl pipe
-* @param pdev: device instance
-* @param buff: pointer to data buffer
-* @param len: length of data to be received
-* @retval status
-*/
-USBD_StatusTypeDef USBD_CtlPrepareRx (USBD_HandleTypeDef *pdev,
- uint8_t *pbuf,
- uint16_t len)
-{
- /* Set EP0 State */
- pdev->ep0_state = USBD_EP0_DATA_OUT;
- pdev->ep_out[0].total_length = len;
- pdev->ep_out[0].rem_length = len;
- /* Start the transfer */
- USBD_LL_PrepareReceive (pdev,
- 0,
- pbuf,
- len);
-
- return USBD_OK;
-}
-
-/**
-* @brief USBD_CtlContinueRx
-* continue receive data on the ctl pipe
-* @param pdev: device instance
-* @param buff: pointer to data buffer
-* @param len: length of data to be received
-* @retval status
-*/
-USBD_StatusTypeDef USBD_CtlContinueRx (USBD_HandleTypeDef *pdev,
- uint8_t *pbuf,
- uint16_t len)
-{
-
- USBD_LL_PrepareReceive (pdev,
- 0,
- pbuf,
- len);
- return USBD_OK;
-}
-/**
-* @brief USBD_CtlSendStatus
-* send zero lzngth packet on the ctl pipe
-* @param pdev: device instance
-* @retval status
-*/
-USBD_StatusTypeDef USBD_CtlSendStatus (USBD_HandleTypeDef *pdev)
-{
-
- /* Set EP0 State */
- pdev->ep0_state = USBD_EP0_STATUS_IN;
-
- /* Start the transfer */
- USBD_LL_Transmit (pdev, 0x00, NULL, 0);
-
- return USBD_OK;
-}
-
-/**
-* @brief USBD_CtlReceiveStatus
-* receive zero lzngth packet on the ctl pipe
-* @param pdev: device instance
-* @retval status
-*/
-USBD_StatusTypeDef USBD_CtlReceiveStatus (USBD_HandleTypeDef *pdev)
-{
- /* Set EP0 State */
- pdev->ep0_state = USBD_EP0_STATUS_OUT;
-
- /* Start the transfer */
- USBD_LL_PrepareReceive ( pdev,
- 0,
- NULL,
- 0);
-
- return USBD_OK;
-}
-
-
-/**
-* @brief USBD_GetRxCount
-* returns the received data length
-* @param pdev: device instance
-* @param ep_addr: endpoint address
-* @retval Rx Data blength
-*/
-uint16_t USBD_GetRxCount (USBD_HandleTypeDef *pdev , uint8_t ep_addr)
-{
- return USBD_LL_GetRxDataSize(pdev, ep_addr);
-}
-
-/**
- * @}
- */
-
-
-/**
- * @}
- */
-
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|