diff options
Diffstat (limited to 'cdc-dials/Middlewares')
13 files changed, 4085 insertions, 0 deletions
diff --git a/cdc-dials/Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc/usbd_cdc.h b/cdc-dials/Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc/usbd_cdc.h new file mode 100644 index 0000000..31397d2 --- /dev/null +++ b/cdc-dials/Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc/usbd_cdc.h @@ -0,0 +1,179 @@ +/**
+ ******************************************************************************
+ * @file usbd_cdc.h
+ * @author MCD Application Team
+ * @version V2.4.2
+ * @date 11-December-2015
+ * @brief header file for the usbd_cdc.c file.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT 2015 STMicroelectronics</center></h2>
+ *
+ * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.st.com/software_license_agreement_liberty_v2
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USB_CDC_H
+#define __USB_CDC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_ioreq.h"
+
+/** @addtogroup STM32_USB_DEVICE_LIBRARY
+ * @{
+ */
+
+/** @defgroup usbd_cdc
+ * @brief This file is the Header file for usbd_cdc.c
+ * @{
+ */
+
+
+/** @defgroup usbd_cdc_Exported_Defines
+ * @{
+ */
+#define CDC_IN_EP 0x81 /* EP1 for data IN */
+#define CDC_OUT_EP 0x01 /* EP1 for data OUT */
+#define CDC_CMD_EP 0x82 /* EP2 for CDC commands */
+
+/* CDC Endpoints parameters: you can fine tune these values depending on the needed baudrates and performance. */
+#define CDC_DATA_HS_MAX_PACKET_SIZE 512 /* Endpoint IN & OUT Packet size */
+#define CDC_DATA_FS_MAX_PACKET_SIZE 64 /* Endpoint IN & OUT Packet size */
+#define CDC_CMD_PACKET_SIZE 8 /* Control Endpoint Packet size */
+
+#define USB_CDC_CONFIG_DESC_SIZ 67
+#define CDC_DATA_HS_IN_PACKET_SIZE CDC_DATA_HS_MAX_PACKET_SIZE
+#define CDC_DATA_HS_OUT_PACKET_SIZE CDC_DATA_HS_MAX_PACKET_SIZE
+
+#define CDC_DATA_FS_IN_PACKET_SIZE CDC_DATA_FS_MAX_PACKET_SIZE
+#define CDC_DATA_FS_OUT_PACKET_SIZE CDC_DATA_FS_MAX_PACKET_SIZE
+
+/*---------------------------------------------------------------------*/
+/* CDC definitions */
+/*---------------------------------------------------------------------*/
+#define CDC_SEND_ENCAPSULATED_COMMAND 0x00
+#define CDC_GET_ENCAPSULATED_RESPONSE 0x01
+#define CDC_SET_COMM_FEATURE 0x02
+#define CDC_GET_COMM_FEATURE 0x03
+#define CDC_CLEAR_COMM_FEATURE 0x04
+#define CDC_SET_LINE_CODING 0x20
+#define CDC_GET_LINE_CODING 0x21
+#define CDC_SET_CONTROL_LINE_STATE 0x22
+#define CDC_SEND_BREAK 0x23
+
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_CORE_Exported_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+typedef struct
+{
+ uint32_t bitrate;
+ uint8_t format;
+ uint8_t paritytype;
+ uint8_t datatype;
+}USBD_CDC_LineCodingTypeDef;
+
+typedef struct _USBD_CDC_Itf
+{
+ int8_t (* Init) (void);
+ int8_t (* DeInit) (void);
+ int8_t (* Control) (uint8_t, uint8_t * , uint16_t);
+ int8_t (* Receive) (uint8_t *, uint32_t *);
+
+}USBD_CDC_ItfTypeDef;
+
+
+typedef struct
+{
+ uint32_t data[CDC_DATA_HS_MAX_PACKET_SIZE/4]; /* Force 32bits alignment */
+ uint8_t CmdOpCode;
+ uint8_t CmdLength;
+ uint8_t *RxBuffer;
+ uint8_t *TxBuffer;
+ uint32_t RxLength;
+ uint32_t TxLength;
+
+ __IO uint32_t TxState;
+ __IO uint32_t RxState;
+}
+USBD_CDC_HandleTypeDef;
+
+
+
+/** @defgroup USBD_CORE_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_CORE_Exported_Variables
+ * @{
+ */
+
+extern USBD_ClassTypeDef USBD_CDC;
+#define USBD_CDC_CLASS &USBD_CDC
+/**
+ * @}
+ */
+
+/** @defgroup USB_CORE_Exported_Functions
+ * @{
+ */
+uint8_t USBD_CDC_RegisterInterface (USBD_HandleTypeDef *pdev,
+ USBD_CDC_ItfTypeDef *fops);
+
+uint8_t USBD_CDC_SetTxBuffer (USBD_HandleTypeDef *pdev,
+ uint8_t *pbuff,
+ uint16_t length);
+
+uint8_t USBD_CDC_SetRxBuffer (USBD_HandleTypeDef *pdev,
+ uint8_t *pbuff);
+
+uint8_t USBD_CDC_ReceivePacket (USBD_HandleTypeDef *pdev);
+
+uint8_t USBD_CDC_TransmitPacket (USBD_HandleTypeDef *pdev);
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __USB_CDC_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/cdc-dials/Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc/usbd_cdc_if_template.h b/cdc-dials/Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc/usbd_cdc_if_template.h new file mode 100644 index 0000000..7fb81d4 --- /dev/null +++ b/cdc-dials/Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc/usbd_cdc_if_template.h @@ -0,0 +1,53 @@ +/**
+ ******************************************************************************
+ * @file usbd_cdc_if_template.h
+ * @author MCD Application Team
+ * @version V2.4.2
+ * @date 11-December-2015
+ * @brief Header for usbd_cdc_if_template.c file.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT 2015 STMicroelectronics</center></h2>
+ *
+ * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.st.com/software_license_agreement_liberty_v2
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USBD_CDC_IF_TEMPLATE_H
+#define __USBD_CDC_IF_TEMPLATE_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_cdc.h"
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+extern USBD_CDC_ItfTypeDef USBD_CDC_Template_fops;
+
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions ------------------------------------------------------- */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __USBD_CDC_IF_TEMPLATE_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/cdc-dials/Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.c b/cdc-dials/Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.c new file mode 100644 index 0000000..06b3fc8 --- /dev/null +++ b/cdc-dials/Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.c @@ -0,0 +1,925 @@ +/**
+ ******************************************************************************
+ * @file usbd_cdc.c
+ * @author MCD Application Team
+ * @version V2.4.2
+ * @date 11-December-2015
+ * @brief This file provides the high layer firmware functions to manage the
+ * following functionalities of the USB CDC Class:
+ * - Initialization and Configuration of high and low layer
+ * - Enumeration as CDC Device (and enumeration for each implemented memory interface)
+ * - OUT/IN data transfer
+ * - Command IN transfer (class requests management)
+ * - Error management
+ *
+ * @verbatim
+ *
+ * ===================================================================
+ * CDC Class Driver Description
+ * ===================================================================
+ * This driver manages the "Universal Serial Bus Class Definitions for Communications Devices
+ * Revision 1.2 November 16, 2007" and the sub-protocol specification of "Universal Serial Bus
+ * Communications Class Subclass Specification for PSTN Devices Revision 1.2 February 9, 2007"
+ * This driver implements the following aspects of the specification:
+ * - Device descriptor management
+ * - Configuration descriptor management
+ * - Enumeration as CDC device with 2 data endpoints (IN and OUT) and 1 command endpoint (IN)
+ * - Requests management (as described in section 6.2 in specification)
+ * - Abstract Control Model compliant
+ * - Union Functional collection (using 1 IN endpoint for control)
+ * - Data interface class
+ *
+ * These aspects may be enriched or modified for a specific user application.
+ *
+ * This driver doesn't implement the following aspects of the specification
+ * (but it is possible to manage these features with some modifications on this driver):
+ * - Any class-specific aspect relative to communication classes should be managed by user application.
+ * - All communication classes other than PSTN are not managed
+ *
+ * @endverbatim
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT 2015 STMicroelectronics</center></h2>
+ *
+ * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.st.com/software_license_agreement_liberty_v2
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_cdc.h"
+#include "usbd_desc.h"
+#include "usbd_ctlreq.h"
+
+
+/** @addtogroup STM32_USB_DEVICE_LIBRARY
+ * @{
+ */
+
+
+/** @defgroup USBD_CDC
+ * @brief usbd core module
+ * @{
+ */
+
+/** @defgroup USBD_CDC_Private_TypesDefinitions
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_CDC_Private_Defines
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_CDC_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_CDC_Private_FunctionPrototypes
+ * @{
+ */
+
+
+static uint8_t USBD_CDC_Init (USBD_HandleTypeDef *pdev,
+ uint8_t cfgidx);
+
+static uint8_t USBD_CDC_DeInit (USBD_HandleTypeDef *pdev,
+ uint8_t cfgidx);
+
+static uint8_t USBD_CDC_Setup (USBD_HandleTypeDef *pdev,
+ USBD_SetupReqTypedef *req);
+
+static uint8_t USBD_CDC_DataIn (USBD_HandleTypeDef *pdev,
+ uint8_t epnum);
+
+static uint8_t USBD_CDC_DataOut (USBD_HandleTypeDef *pdev,
+ uint8_t epnum);
+
+static uint8_t USBD_CDC_EP0_RxReady (USBD_HandleTypeDef *pdev);
+
+static uint8_t *USBD_CDC_GetFSCfgDesc (uint16_t *length);
+
+static uint8_t *USBD_CDC_GetHSCfgDesc (uint16_t *length);
+
+static uint8_t *USBD_CDC_GetOtherSpeedCfgDesc (uint16_t *length);
+
+static uint8_t *USBD_CDC_GetOtherSpeedCfgDesc (uint16_t *length);
+
+uint8_t *USBD_CDC_GetDeviceQualifierDescriptor (uint16_t *length);
+
+/* USB Standard Device Descriptor */
+__ALIGN_BEGIN static uint8_t USBD_CDC_DeviceQualifierDesc[USB_LEN_DEV_QUALIFIER_DESC] __ALIGN_END =
+{
+ USB_LEN_DEV_QUALIFIER_DESC,
+ USB_DESC_TYPE_DEVICE_QUALIFIER,
+ 0x00,
+ 0x02,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x40,
+ 0x01,
+ 0x00,
+};
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_CDC_Private_Variables
+ * @{
+ */
+
+
+/* CDC interface class callbacks structure */
+USBD_ClassTypeDef USBD_CDC =
+{
+ USBD_CDC_Init,
+ USBD_CDC_DeInit,
+ USBD_CDC_Setup,
+ NULL, /* EP0_TxSent, */
+ USBD_CDC_EP0_RxReady,
+ USBD_CDC_DataIn,
+ USBD_CDC_DataOut,
+ NULL,
+ NULL,
+ NULL,
+ USBD_CDC_GetHSCfgDesc,
+ USBD_CDC_GetFSCfgDesc,
+ USBD_CDC_GetOtherSpeedCfgDesc,
+ USBD_CDC_GetDeviceQualifierDescriptor,
+};
+
+/* USB CDC device Configuration Descriptor */
+__ALIGN_BEGIN uint8_t USBD_CDC_CfgHSDesc[USB_CDC_CONFIG_DESC_SIZ] __ALIGN_END =
+{
+ /*Configuration Descriptor*/
+ 0x09, /* bLength: Configuration Descriptor size */
+ USB_DESC_TYPE_CONFIGURATION, /* bDescriptorType: Configuration */
+ USB_CDC_CONFIG_DESC_SIZ, /* wTotalLength:no of returned bytes */
+ 0x00,
+ 0x02, /* bNumInterfaces: 2 interface */
+ 0x01, /* bConfigurationValue: Configuration value */
+ 0x00, /* iConfiguration: Index of string descriptor describing the configuration */
+ 0xC0, /* bmAttributes: self powered */
+ 0x32, /* MaxPower 0 mA */
+
+ /*---------------------------------------------------------------------------*/
+
+ /*Interface Descriptor */
+ 0x09, /* bLength: Interface Descriptor size */
+ USB_DESC_TYPE_INTERFACE, /* bDescriptorType: Interface */
+ /* Interface descriptor type */
+ 0x00, /* bInterfaceNumber: Number of Interface */
+ 0x00, /* bAlternateSetting: Alternate setting */
+ 0x01, /* bNumEndpoints: One endpoints used */
+ 0x02, /* bInterfaceClass: Communication Interface Class */
+ 0x02, /* bInterfaceSubClass: Abstract Control Model */
+ 0x01, /* bInterfaceProtocol: Common AT commands */
+ 0x00, /* iInterface: */
+
+ /*Header Functional Descriptor*/
+ 0x05, /* bLength: Endpoint Descriptor size */
+ 0x24, /* bDescriptorType: CS_INTERFACE */
+ 0x00, /* bDescriptorSubtype: Header Func Desc */
+ 0x10, /* bcdCDC: spec release number */
+ 0x01,
+
+ /*Call Management Functional Descriptor*/
+ 0x05, /* bFunctionLength */
+ 0x24, /* bDescriptorType: CS_INTERFACE */
+ 0x01, /* bDescriptorSubtype: Call Management Func Desc */
+ 0x00, /* bmCapabilities: D0+D1 */
+ 0x01, /* bDataInterface: 1 */
+
+ /*ACM Functional Descriptor*/
+ 0x04, /* bFunctionLength */
+ 0x24, /* bDescriptorType: CS_INTERFACE */
+ 0x02, /* bDescriptorSubtype: Abstract Control Management desc */
+ 0x02, /* bmCapabilities */
+
+ /*Union Functional Descriptor*/
+ 0x05, /* bFunctionLength */
+ 0x24, /* bDescriptorType: CS_INTERFACE */
+ 0x06, /* bDescriptorSubtype: Union func desc */
+ 0x00, /* bMasterInterface: Communication class interface */
+ 0x01, /* bSlaveInterface0: Data Class Interface */
+
+ /*Endpoint 2 Descriptor*/
+ 0x07, /* bLength: Endpoint Descriptor size */
+ USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */
+ CDC_CMD_EP, /* bEndpointAddress */
+ 0x03, /* bmAttributes: Interrupt */
+ LOBYTE(CDC_CMD_PACKET_SIZE), /* wMaxPacketSize: */
+ HIBYTE(CDC_CMD_PACKET_SIZE),
+ 0x10, /* bInterval: */
+ /*---------------------------------------------------------------------------*/
+
+ /*Data class interface descriptor*/
+ 0x09, /* bLength: Endpoint Descriptor size */
+ USB_DESC_TYPE_INTERFACE, /* bDescriptorType: */
+ 0x01, /* bInterfaceNumber: Number of Interface */
+ 0x00, /* bAlternateSetting: Alternate setting */
+ 0x02, /* bNumEndpoints: Two endpoints used */
+ 0x0A, /* bInterfaceClass: CDC */
+ 0x00, /* bInterfaceSubClass: */
+ 0x00, /* bInterfaceProtocol: */
+ 0x00, /* iInterface: */
+
+ /*Endpoint OUT Descriptor*/
+ 0x07, /* bLength: Endpoint Descriptor size */
+ USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */
+ CDC_OUT_EP, /* bEndpointAddress */
+ 0x02, /* bmAttributes: Bulk */
+ LOBYTE(CDC_DATA_HS_MAX_PACKET_SIZE), /* wMaxPacketSize: */
+ HIBYTE(CDC_DATA_HS_MAX_PACKET_SIZE),
+ 0x00, /* bInterval: ignore for Bulk transfer */
+
+ /*Endpoint IN Descriptor*/
+ 0x07, /* bLength: Endpoint Descriptor size */
+ USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */
+ CDC_IN_EP, /* bEndpointAddress */
+ 0x02, /* bmAttributes: Bulk */
+ LOBYTE(CDC_DATA_HS_MAX_PACKET_SIZE), /* wMaxPacketSize: */
+ HIBYTE(CDC_DATA_HS_MAX_PACKET_SIZE),
+ 0x00 /* bInterval: ignore for Bulk transfer */
+} ;
+
+
+/* USB CDC device Configuration Descriptor */
+__ALIGN_BEGIN uint8_t USBD_CDC_CfgFSDesc[USB_CDC_CONFIG_DESC_SIZ] __ALIGN_END =
+{
+ /*Configuration Descriptor*/
+ 0x09, /* bLength: Configuration Descriptor size */
+ USB_DESC_TYPE_CONFIGURATION, /* bDescriptorType: Configuration */
+ USB_CDC_CONFIG_DESC_SIZ, /* wTotalLength:no of returned bytes */
+ 0x00,
+ 0x02, /* bNumInterfaces: 2 interface */
+ 0x01, /* bConfigurationValue: Configuration value */
+ 0x00, /* iConfiguration: Index of string descriptor describing the configuration */
+ 0xC0, /* bmAttributes: self powered */
+ 0x32, /* MaxPower 0 mA */
+
+ /*---------------------------------------------------------------------------*/
+
+ /*Interface Descriptor */
+ 0x09, /* bLength: Interface Descriptor size */
+ USB_DESC_TYPE_INTERFACE, /* bDescriptorType: Interface */
+ /* Interface descriptor type */
+ 0x00, /* bInterfaceNumber: Number of Interface */
+ 0x00, /* bAlternateSetting: Alternate setting */
+ 0x01, /* bNumEndpoints: One endpoints used */
+ 0x02, /* bInterfaceClass: Communication Interface Class */
+ 0x02, /* bInterfaceSubClass: Abstract Control Model */
+ 0x01, /* bInterfaceProtocol: Common AT commands */
+ 0x00, /* iInterface: */
+
+ /*Header Functional Descriptor*/
+ 0x05, /* bLength: Endpoint Descriptor size */
+ 0x24, /* bDescriptorType: CS_INTERFACE */
+ 0x00, /* bDescriptorSubtype: Header Func Desc */
+ 0x10, /* bcdCDC: spec release number */
+ 0x01,
+
+ /*Call Management Functional Descriptor*/
+ 0x05, /* bFunctionLength */
+ 0x24, /* bDescriptorType: CS_INTERFACE */
+ 0x01, /* bDescriptorSubtype: Call Management Func Desc */
+ 0x00, /* bmCapabilities: D0+D1 */
+ 0x01, /* bDataInterface: 1 */
+
+ /*ACM Functional Descriptor*/
+ 0x04, /* bFunctionLength */
+ 0x24, /* bDescriptorType: CS_INTERFACE */
+ 0x02, /* bDescriptorSubtype: Abstract Control Management desc */
+ 0x02, /* bmCapabilities */
+
+ /*Union Functional Descriptor*/
+ 0x05, /* bFunctionLength */
+ 0x24, /* bDescriptorType: CS_INTERFACE */
+ 0x06, /* bDescriptorSubtype: Union func desc */
+ 0x00, /* bMasterInterface: Communication class interface */
+ 0x01, /* bSlaveInterface0: Data Class Interface */
+
+ /*Endpoint 2 Descriptor*/
+ 0x07, /* bLength: Endpoint Descriptor size */
+ USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */
+ CDC_CMD_EP, /* bEndpointAddress */
+ 0x03, /* bmAttributes: Interrupt */
+ LOBYTE(CDC_CMD_PACKET_SIZE), /* wMaxPacketSize: */
+ HIBYTE(CDC_CMD_PACKET_SIZE),
+ 0x10, /* bInterval: */
+ /*---------------------------------------------------------------------------*/
+
+ /*Data class interface descriptor*/
+ 0x09, /* bLength: Endpoint Descriptor size */
+ USB_DESC_TYPE_INTERFACE, /* bDescriptorType: */
+ 0x01, /* bInterfaceNumber: Number of Interface */
+ 0x00, /* bAlternateSetting: Alternate setting */
+ 0x02, /* bNumEndpoints: Two endpoints used */
+ 0x0A, /* bInterfaceClass: CDC */
+ 0x00, /* bInterfaceSubClass: */
+ 0x00, /* bInterfaceProtocol: */
+ 0x00, /* iInterface: */
+
+ /*Endpoint OUT Descriptor*/
+ 0x07, /* bLength: Endpoint Descriptor size */
+ USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */
+ CDC_OUT_EP, /* bEndpointAddress */
+ 0x02, /* bmAttributes: Bulk */
+ LOBYTE(CDC_DATA_FS_MAX_PACKET_SIZE), /* wMaxPacketSize: */
+ HIBYTE(CDC_DATA_FS_MAX_PACKET_SIZE),
+ 0x00, /* bInterval: ignore for Bulk transfer */
+
+ /*Endpoint IN Descriptor*/
+ 0x07, /* bLength: Endpoint Descriptor size */
+ USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */
+ CDC_IN_EP, /* bEndpointAddress */
+ 0x02, /* bmAttributes: Bulk */
+ LOBYTE(CDC_DATA_FS_MAX_PACKET_SIZE), /* wMaxPacketSize: */
+ HIBYTE(CDC_DATA_FS_MAX_PACKET_SIZE),
+ 0x00 /* bInterval: ignore for Bulk transfer */
+} ;
+
+__ALIGN_BEGIN uint8_t USBD_CDC_OtherSpeedCfgDesc[USB_CDC_CONFIG_DESC_SIZ] __ALIGN_END =
+{
+ 0x09, /* bLength: Configuation Descriptor size */
+ USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION,
+ USB_CDC_CONFIG_DESC_SIZ,
+ 0x00,
+ 0x02, /* bNumInterfaces: 2 interfaces */
+ 0x01, /* bConfigurationValue: */
+ 0x04, /* iConfiguration: */
+ 0xC0, /* bmAttributes: */
+ 0x32, /* MaxPower 100 mA */
+
+ /*Interface Descriptor */
+ 0x09, /* bLength: Interface Descriptor size */
+ USB_DESC_TYPE_INTERFACE, /* bDescriptorType: Interface */
+ /* Interface descriptor type */
+ 0x00, /* bInterfaceNumber: Number of Interface */
+ 0x00, /* bAlternateSetting: Alternate setting */
+ 0x01, /* bNumEndpoints: One endpoints used */
+ 0x02, /* bInterfaceClass: Communication Interface Class */
+ 0x02, /* bInterfaceSubClass: Abstract Control Model */
+ 0x01, /* bInterfaceProtocol: Common AT commands */
+ 0x00, /* iInterface: */
+
+ /*Header Functional Descriptor*/
+ 0x05, /* bLength: Endpoint Descriptor size */
+ 0x24, /* bDescriptorType: CS_INTERFACE */
+ 0x00, /* bDescriptorSubtype: Header Func Desc */
+ 0x10, /* bcdCDC: spec release number */
+ 0x01,
+
+ /*Call Management Functional Descriptor*/
+ 0x05, /* bFunctionLength */
+ 0x24, /* bDescriptorType: CS_INTERFACE */
+ 0x01, /* bDescriptorSubtype: Call Management Func Desc */
+ 0x00, /* bmCapabilities: D0+D1 */
+ 0x01, /* bDataInterface: 1 */
+
+ /*ACM Functional Descriptor*/
+ 0x04, /* bFunctionLength */
+ 0x24, /* bDescriptorType: CS_INTERFACE */
+ 0x02, /* bDescriptorSubtype: Abstract Control Management desc */
+ 0x02, /* bmCapabilities */
+
+ /*Union Functional Descriptor*/
+ 0x05, /* bFunctionLength */
+ 0x24, /* bDescriptorType: CS_INTERFACE */
+ 0x06, /* bDescriptorSubtype: Union func desc */
+ 0x00, /* bMasterInterface: Communication class interface */
+ 0x01, /* bSlaveInterface0: Data Class Interface */
+
+ /*Endpoint 2 Descriptor*/
+ 0x07, /* bLength: Endpoint Descriptor size */
+ USB_DESC_TYPE_ENDPOINT , /* bDescriptorType: Endpoint */
+ CDC_CMD_EP, /* bEndpointAddress */
+ 0x03, /* bmAttributes: Interrupt */
+ LOBYTE(CDC_CMD_PACKET_SIZE), /* wMaxPacketSize: */
+ HIBYTE(CDC_CMD_PACKET_SIZE),
+ 0xFF, /* bInterval: */
+
+ /*---------------------------------------------------------------------------*/
+
+ /*Data class interface descriptor*/
+ 0x09, /* bLength: Endpoint Descriptor size */
+ USB_DESC_TYPE_INTERFACE, /* bDescriptorType: */
+ 0x01, /* bInterfaceNumber: Number of Interface */
+ 0x00, /* bAlternateSetting: Alternate setting */
+ 0x02, /* bNumEndpoints: Two endpoints used */
+ 0x0A, /* bInterfaceClass: CDC */
+ 0x00, /* bInterfaceSubClass: */
+ 0x00, /* bInterfaceProtocol: */
+ 0x00, /* iInterface: */
+
+ /*Endpoint OUT Descriptor*/
+ 0x07, /* bLength: Endpoint Descriptor size */
+ USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */
+ CDC_OUT_EP, /* bEndpointAddress */
+ 0x02, /* bmAttributes: Bulk */
+ 0x40, /* wMaxPacketSize: */
+ 0x00,
+ 0x00, /* bInterval: ignore for Bulk transfer */
+
+ /*Endpoint IN Descriptor*/
+ 0x07, /* bLength: Endpoint Descriptor size */
+ USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */
+ CDC_IN_EP, /* bEndpointAddress */
+ 0x02, /* bmAttributes: Bulk */
+ 0x40, /* wMaxPacketSize: */
+ 0x00,
+ 0x00 /* bInterval */
+};
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_CDC_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief USBD_CDC_Init
+ * Initialize the CDC interface
+ * @param pdev: device instance
+ * @param cfgidx: Configuration index
+ * @retval status
+ */
+static uint8_t USBD_CDC_Init (USBD_HandleTypeDef *pdev,
+ uint8_t cfgidx)
+{
+ uint8_t ret = 0;
+ USBD_CDC_HandleTypeDef *hcdc;
+
+ if(pdev->dev_speed == USBD_SPEED_HIGH )
+ {
+ /* Open EP IN */
+ USBD_LL_OpenEP(pdev,
+ CDC_IN_EP,
+ USBD_EP_TYPE_BULK,
+ CDC_DATA_HS_IN_PACKET_SIZE);
+
+ /* Open EP OUT */
+ USBD_LL_OpenEP(pdev,
+ CDC_OUT_EP,
+ USBD_EP_TYPE_BULK,
+ CDC_DATA_HS_OUT_PACKET_SIZE);
+
+ }
+ else
+ {
+ /* Open EP IN */
+ USBD_LL_OpenEP(pdev,
+ CDC_IN_EP,
+ USBD_EP_TYPE_BULK,
+ CDC_DATA_FS_IN_PACKET_SIZE);
+
+ /* Open EP OUT */
+ USBD_LL_OpenEP(pdev,
+ CDC_OUT_EP,
+ USBD_EP_TYPE_BULK,
+ CDC_DATA_FS_OUT_PACKET_SIZE);
+ }
+ /* Open Command IN EP */
+ USBD_LL_OpenEP(pdev,
+ CDC_CMD_EP,
+ USBD_EP_TYPE_INTR,
+ CDC_CMD_PACKET_SIZE);
+
+
+ pdev->pClassData = USBD_malloc(sizeof (USBD_CDC_HandleTypeDef));
+
+ if(pdev->pClassData == NULL)
+ {
+ ret = 1;
+ }
+ else
+ {
+ hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData;
+
+ /* Init physical Interface components */
+ ((USBD_CDC_ItfTypeDef *)pdev->pUserData)->Init();
+
+ /* Init Xfer states */
+ hcdc->TxState =0;
+ hcdc->RxState =0;
+
+ if(pdev->dev_speed == USBD_SPEED_HIGH )
+ {
+ /* Prepare Out endpoint to receive next packet */
+ USBD_LL_PrepareReceive(pdev,
+ CDC_OUT_EP,
+ hcdc->RxBuffer,
+ CDC_DATA_HS_OUT_PACKET_SIZE);
+ }
+ else
+ {
+ /* Prepare Out endpoint to receive next packet */
+ USBD_LL_PrepareReceive(pdev,
+ CDC_OUT_EP,
+ hcdc->RxBuffer,
+ CDC_DATA_FS_OUT_PACKET_SIZE);
+ }
+
+
+ }
+ return ret;
+}
+
+/**
+ * @brief USBD_CDC_Init
+ * DeInitialize the CDC layer
+ * @param pdev: device instance
+ * @param cfgidx: Configuration index
+ * @retval status
+ */
+static uint8_t USBD_CDC_DeInit (USBD_HandleTypeDef *pdev,
+ uint8_t cfgidx)
+{
+ uint8_t ret = 0;
+
+ /* Open EP IN */
+ USBD_LL_CloseEP(pdev,
+ CDC_IN_EP);
+
+ /* Open EP OUT */
+ USBD_LL_CloseEP(pdev,
+ CDC_OUT_EP);
+
+ /* Open Command IN EP */
+ USBD_LL_CloseEP(pdev,
+ CDC_CMD_EP);
+
+
+ /* DeInit physical Interface components */
+ if(pdev->pClassData != NULL)
+ {
+ ((USBD_CDC_ItfTypeDef *)pdev->pUserData)->DeInit();
+ USBD_free(pdev->pClassData);
+ pdev->pClassData = NULL;
+ }
+
+ return ret;
+}
+
+/**
+ * @brief USBD_CDC_Setup
+ * Handle the CDC specific requests
+ * @param pdev: instance
+ * @param req: usb requests
+ * @retval status
+ */
+static uint8_t USBD_CDC_Setup (USBD_HandleTypeDef *pdev,
+ USBD_SetupReqTypedef *req)
+{
+ USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData;
+ static uint8_t ifalt = 0;
+
+ switch (req->bmRequest & USB_REQ_TYPE_MASK)
+ {
+ case USB_REQ_TYPE_CLASS :
+ if (req->wLength)
+ {
+ if (req->bmRequest & 0x80)
+ {
+ ((USBD_CDC_ItfTypeDef *)pdev->pUserData)->Control(req->bRequest,
+ (uint8_t *)hcdc->data,
+ req->wLength);
+ USBD_CtlSendData (pdev,
+ (uint8_t *)hcdc->data,
+ req->wLength);
+ }
+ else
+ {
+ hcdc->CmdOpCode = req->bRequest;
+ hcdc->CmdLength = req->wLength;
+
+ USBD_CtlPrepareRx (pdev,
+ (uint8_t *)hcdc->data,
+ req->wLength);
+ }
+
+ }
+ else
+ {
+ ((USBD_CDC_ItfTypeDef *)pdev->pUserData)->Control(req->bRequest,
+ (uint8_t*)req,
+ 0);
+ }
+ break;
+
+ case USB_REQ_TYPE_STANDARD:
+ switch (req->bRequest)
+ {
+ case USB_REQ_GET_INTERFACE :
+ USBD_CtlSendData (pdev,
+ &ifalt,
+ 1);
+ break;
+
+ case USB_REQ_SET_INTERFACE :
+ break;
+ }
+
+ default:
+ break;
+ }
+ return USBD_OK;
+}
+
+/**
+ * @brief USBD_CDC_DataIn
+ * Data sent on non-control IN endpoint
+ * @param pdev: device instance
+ * @param epnum: endpoint number
+ * @retval status
+ */
+static uint8_t USBD_CDC_DataIn (USBD_HandleTypeDef *pdev, uint8_t epnum)
+{
+ USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData;
+
+ if(pdev->pClassData != NULL)
+ {
+
+ hcdc->TxState = 0;
+
+ return USBD_OK;
+ }
+ else
+ {
+ return USBD_FAIL;
+ }
+}
+
+/**
+ * @brief USBD_CDC_DataOut
+ * Data received on non-control Out endpoint
+ * @param pdev: device instance
+ * @param epnum: endpoint number
+ * @retval status
+ */
+static uint8_t USBD_CDC_DataOut (USBD_HandleTypeDef *pdev, uint8_t epnum)
+{
+ USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData;
+
+ /* Get the received data length */
+ hcdc->RxLength = USBD_LL_GetRxDataSize (pdev, epnum);
+
+ /* USB data will be immediately processed, this allow next USB traffic being
+ NAKed till the end of the application Xfer */
+ if(pdev->pClassData != NULL)
+ {
+ ((USBD_CDC_ItfTypeDef *)pdev->pUserData)->Receive(hcdc->RxBuffer, &hcdc->RxLength);
+
+ return USBD_OK;
+ }
+ else
+ {
+ return USBD_FAIL;
+ }
+}
+
+
+
+/**
+ * @brief USBD_CDC_DataOut
+ * Data received on non-control Out endpoint
+ * @param pdev: device instance
+ * @param epnum: endpoint number
+ * @retval status
+ */
+static uint8_t USBD_CDC_EP0_RxReady (USBD_HandleTypeDef *pdev)
+{
+ USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData;
+
+ if((pdev->pUserData != NULL) && (hcdc->CmdOpCode != 0xFF))
+ {
+ ((USBD_CDC_ItfTypeDef *)pdev->pUserData)->Control(hcdc->CmdOpCode,
+ (uint8_t *)hcdc->data,
+ hcdc->CmdLength);
+ hcdc->CmdOpCode = 0xFF;
+
+ }
+ return USBD_OK;
+}
+
+/**
+ * @brief USBD_CDC_GetFSCfgDesc
+ * Return configuration descriptor
+ * @param speed : current device speed
+ * @param length : pointer data length
+ * @retval pointer to descriptor buffer
+ */
+static uint8_t *USBD_CDC_GetFSCfgDesc (uint16_t *length)
+{
+ *length = sizeof (USBD_CDC_CfgFSDesc);
+ return USBD_CDC_CfgFSDesc;
+}
+
+/**
+ * @brief USBD_CDC_GetHSCfgDesc
+ * Return configuration descriptor
+ * @param speed : current device speed
+ * @param length : pointer data length
+ * @retval pointer to descriptor buffer
+ */
+static uint8_t *USBD_CDC_GetHSCfgDesc (uint16_t *length)
+{
+ *length = sizeof (USBD_CDC_CfgHSDesc);
+ return USBD_CDC_CfgHSDesc;
+}
+
+/**
+ * @brief USBD_CDC_GetCfgDesc
+ * Return configuration descriptor
+ * @param speed : current device speed
+ * @param length : pointer data length
+ * @retval pointer to descriptor buffer
+ */
+static uint8_t *USBD_CDC_GetOtherSpeedCfgDesc (uint16_t *length)
+{
+ *length = sizeof (USBD_CDC_OtherSpeedCfgDesc);
+ return USBD_CDC_OtherSpeedCfgDesc;
+}
+
+/**
+* @brief DeviceQualifierDescriptor
+* return Device Qualifier descriptor
+* @param length : pointer data length
+* @retval pointer to descriptor buffer
+*/
+uint8_t *USBD_CDC_GetDeviceQualifierDescriptor (uint16_t *length)
+{
+ *length = sizeof (USBD_CDC_DeviceQualifierDesc);
+ return USBD_CDC_DeviceQualifierDesc;
+}
+
+/**
+* @brief USBD_CDC_RegisterInterface
+ * @param pdev: device instance
+ * @param fops: CD Interface callback
+ * @retval status
+ */
+uint8_t USBD_CDC_RegisterInterface (USBD_HandleTypeDef *pdev,
+ USBD_CDC_ItfTypeDef *fops)
+{
+ uint8_t ret = USBD_FAIL;
+
+ if(fops != NULL)
+ {
+ pdev->pUserData= fops;
+ ret = USBD_OK;
+ }
+
+ return ret;
+}
+
+/**
+ * @brief USBD_CDC_SetTxBuffer
+ * @param pdev: device instance
+ * @param pbuff: Tx Buffer
+ * @retval status
+ */
+uint8_t USBD_CDC_SetTxBuffer (USBD_HandleTypeDef *pdev,
+ uint8_t *pbuff,
+ uint16_t length)
+{
+ USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData;
+
+ hcdc->TxBuffer = pbuff;
+ hcdc->TxLength = length;
+
+ return USBD_OK;
+}
+
+
+/**
+ * @brief USBD_CDC_SetRxBuffer
+ * @param pdev: device instance
+ * @param pbuff: Rx Buffer
+ * @retval status
+ */
+uint8_t USBD_CDC_SetRxBuffer (USBD_HandleTypeDef *pdev,
+ uint8_t *pbuff)
+{
+ USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData;
+
+ hcdc->RxBuffer = pbuff;
+
+ return USBD_OK;
+}
+
+/**
+ * @brief USBD_CDC_DataOut
+ * Data received on non-control Out endpoint
+ * @param pdev: device instance
+ * @param epnum: endpoint number
+ * @retval status
+ */
+uint8_t USBD_CDC_TransmitPacket(USBD_HandleTypeDef *pdev)
+{
+ USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData;
+
+ if(pdev->pClassData != NULL)
+ {
+ if(hcdc->TxState == 0)
+ {
+ /* Tx Transfer in progress */
+ hcdc->TxState = 1;
+
+ /* Transmit next packet */
+ USBD_LL_Transmit(pdev,
+ CDC_IN_EP,
+ hcdc->TxBuffer,
+ hcdc->TxLength);
+
+ return USBD_OK;
+ }
+ else
+ {
+ return USBD_BUSY;
+ }
+ }
+ else
+ {
+ return USBD_FAIL;
+ }
+}
+
+
+/**
+ * @brief USBD_CDC_ReceivePacket
+ * prepare OUT Endpoint for reception
+ * @param pdev: device instance
+ * @retval status
+ */
+uint8_t USBD_CDC_ReceivePacket(USBD_HandleTypeDef *pdev)
+{
+ USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData;
+
+ /* Suspend or Resume USB Out process */
+ if(pdev->pClassData != NULL)
+ {
+ if(pdev->dev_speed == USBD_SPEED_HIGH )
+ {
+ /* Prepare Out endpoint to receive next packet */
+ USBD_LL_PrepareReceive(pdev,
+ CDC_OUT_EP,
+ hcdc->RxBuffer,
+ CDC_DATA_HS_OUT_PACKET_SIZE);
+ }
+ else
+ {
+ /* Prepare Out endpoint to receive next packet */
+ USBD_LL_PrepareReceive(pdev,
+ CDC_OUT_EP,
+ hcdc->RxBuffer,
+ CDC_DATA_FS_OUT_PACKET_SIZE);
+ }
+ return USBD_OK;
+ }
+ else
+ {
+ return USBD_FAIL;
+ }
+}
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/cdc-dials/Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc_if_template.c b/cdc-dials/Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc_if_template.c new file mode 100644 index 0000000..e731353 --- /dev/null +++ b/cdc-dials/Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc_if_template.c @@ -0,0 +1,226 @@ +/**
+ ******************************************************************************
+ * @file usbd_cdc_if_template.c
+ * @author MCD Application Team
+ * @version V2.4.2
+ * @date 11-December-2015
+ * @brief Generic media access Layer.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT 2015 STMicroelectronics</center></h2>
+ *
+ * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.st.com/software_license_agreement_liberty_v2
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_cdc_if_template.h"
+
+/** @addtogroup STM32_USB_DEVICE_LIBRARY
+ * @{
+ */
+
+
+/** @defgroup USBD_CDC
+ * @brief usbd core module
+ * @{
+ */
+
+/** @defgroup USBD_CDC_Private_TypesDefinitions
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_CDC_Private_Defines
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_CDC_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_CDC_Private_FunctionPrototypes
+ * @{
+ */
+
+static int8_t TEMPLATE_Init (void);
+static int8_t TEMPLATE_DeInit (void);
+static int8_t TEMPLATE_Control (uint8_t cmd, uint8_t* pbuf, uint16_t length);
+static int8_t TEMPLATE_Receive (uint8_t* pbuf, uint32_t *Len);
+
+USBD_CDC_ItfTypeDef USBD_CDC_Template_fops =
+{
+ TEMPLATE_Init,
+ TEMPLATE_DeInit,
+ TEMPLATE_Control,
+ TEMPLATE_Receive
+};
+
+USBD_CDC_LineCodingTypeDef linecoding =
+ {
+ 115200, /* baud rate*/
+ 0x00, /* stop bits-1*/
+ 0x00, /* parity - none*/
+ 0x08 /* nb. of bits 8*/
+ };
+
+/* Private functions ---------------------------------------------------------*/
+
+/**
+ * @brief TEMPLATE_Init
+ * Initializes the CDC media low layer
+ * @param None
+ * @retval Result of the operation: USBD_OK if all operations are OK else USBD_FAIL
+ */
+static int8_t TEMPLATE_Init(void)
+{
+ /*
+ Add your initialization code here
+ */
+ return (0);
+}
+
+/**
+ * @brief TEMPLATE_DeInit
+ * DeInitializes the CDC media low layer
+ * @param None
+ * @retval Result of the operation: USBD_OK if all operations are OK else USBD_FAIL
+ */
+static int8_t TEMPLATE_DeInit(void)
+{
+ /*
+ Add your deinitialization code here
+ */
+ return (0);
+}
+
+
+/**
+ * @brief TEMPLATE_Control
+ * Manage the CDC class requests
+ * @param Cmd: Command code
+ * @param Buf: Buffer containing command data (request parameters)
+ * @param Len: Number of data to be sent (in bytes)
+ * @retval Result of the operation: USBD_OK if all operations are OK else USBD_FAIL
+ */
+static int8_t TEMPLATE_Control (uint8_t cmd, uint8_t* pbuf, uint16_t length)
+{
+ switch (cmd)
+ {
+ case CDC_SEND_ENCAPSULATED_COMMAND:
+ /* Add your code here */
+ break;
+
+ case CDC_GET_ENCAPSULATED_RESPONSE:
+ /* Add your code here */
+ break;
+
+ case CDC_SET_COMM_FEATURE:
+ /* Add your code here */
+ break;
+
+ case CDC_GET_COMM_FEATURE:
+ /* Add your code here */
+ break;
+
+ case CDC_CLEAR_COMM_FEATURE:
+ /* Add your code here */
+ break;
+
+ case CDC_SET_LINE_CODING:
+ linecoding.bitrate = (uint32_t)(pbuf[0] | (pbuf[1] << 8) |\
+ (pbuf[2] << 16) | (pbuf[3] << 24));
+ linecoding.format = pbuf[4];
+ linecoding.paritytype = pbuf[5];
+ linecoding.datatype = pbuf[6];
+
+ /* Add your code here */
+ break;
+
+ case CDC_GET_LINE_CODING:
+ pbuf[0] = (uint8_t)(linecoding.bitrate);
+ pbuf[1] = (uint8_t)(linecoding.bitrate >> 8);
+ pbuf[2] = (uint8_t)(linecoding.bitrate >> 16);
+ pbuf[3] = (uint8_t)(linecoding.bitrate >> 24);
+ pbuf[4] = linecoding.format;
+ pbuf[5] = linecoding.paritytype;
+ pbuf[6] = linecoding.datatype;
+
+ /* Add your code here */
+ break;
+
+ case CDC_SET_CONTROL_LINE_STATE:
+ /* Add your code here */
+ break;
+
+ case CDC_SEND_BREAK:
+ /* Add your code here */
+ break;
+
+ default:
+ break;
+ }
+
+ return (0);
+}
+
+/**
+ * @brief TEMPLATE_Receive
+ * Data received over USB OUT endpoint are sent over CDC interface
+ * through this function.
+ *
+ * @note
+ * This function will issue a NAK packet on any OUT packet received on
+ * USB endpoint untill exiting this function. If you exit this function
+ * before transfer is complete on CDC interface (ie. using DMA controller)
+ * it will result in receiving more data while previous ones are still
+ * not sent.
+ *
+ * @param Buf: Buffer of data to be received
+ * @param Len: Number of data received (in bytes)
+ * @retval Result of the operation: USBD_OK if all operations are OK else USBD_FAIL
+ */
+static int8_t TEMPLATE_Receive (uint8_t* Buf, uint32_t *Len)
+{
+
+ return (0);
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/cdc-dials/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_conf_template.h b/cdc-dials/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_conf_template.h new file mode 100644 index 0000000..1f4d9e5 --- /dev/null +++ b/cdc-dials/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_conf_template.h @@ -0,0 +1,169 @@ +/**
+ ******************************************************************************
+ * @file usbd_conf_template.h
+ * @author MCD Application Team
+ * @version V2.4.2
+ * @date 11-December-2015
+ * @brief Header file for the usbd_conf_template.c file
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT 2015 STMicroelectronics</center></h2>
+ *
+ * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.st.com/software_license_agreement_liberty_v2
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USBD_CONF_TEMPLATE_H
+#define __USBD_CONF_TEMPLATE_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32fxxx.h" /* replace 'stm32xxx' with your HAL driver header filename, ex: stm32f4xx.h */
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+
+/** @addtogroup STM32_USB_DEVICE_LIBRARY
+ * @{
+ */
+
+/** @defgroup USBD_CONF
+ * @brief USB device low level driver configuration file
+ * @{
+ */
+
+/** @defgroup USBD_CONF_Exported_Defines
+ * @{
+ */
+
+#define USBD_MAX_NUM_INTERFACES 1
+#define USBD_MAX_NUM_CONFIGURATION 1
+#define USBD_MAX_STR_DESC_SIZ 0x100
+#define USBD_SUPPORT_USER_STRING 0
+#define USBD_SELF_POWERED 1
+#define USBD_DEBUG_LEVEL 2
+
+/* MSC Class Config */
+#define MSC_MEDIA_PACKET 8192
+
+/* CDC Class Config */
+#define USBD_CDC_INTERVAL 2000
+
+ /* DFU Class Config */
+#define USBD_DFU_MAX_ITF_NUM 1
+#define USBD_DFU_XFERS_IZE 1024
+
+ /* AUDIO Class Config */
+#define USBD_AUDIO_FREQ 22100
+
+/** @defgroup USBD_Exported_Macros
+ * @{
+ */
+
+ /* Memory management macros */
+#define USBD_malloc malloc
+#define USBD_free free
+#define USBD_memset memset
+#define USBD_memcpy memcpy
+
+ /* DEBUG macros */
+
+
+#if (USBD_DEBUG_LEVEL > 0)
+#define USBD_UsrLog(...) printf(__VA_ARGS__);\
+ printf("\n");
+#else
+#define USBD_UsrLog(...)
+#endif
+
+
+#if (USBD_DEBUG_LEVEL > 1)
+
+#define USBD_ErrLog(...) printf("ERROR: ") ;\
+ printf(__VA_ARGS__);\
+ printf("\n");
+#else
+#define USBD_ErrLog(...)
+#endif
+
+
+#if (USBD_DEBUG_LEVEL > 2)
+#define USBD_DbgLog(...) printf("DEBUG : ") ;\
+ printf(__VA_ARGS__);\
+ printf("\n");
+#else
+#define USBD_DbgLog(...)
+#endif
+
+/**
+ * @}
+ */
+
+
+
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_CONF_Exported_Types
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_CONF_Exported_Macros
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup USBD_CONF_Exported_Variables
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup USBD_CONF_Exported_FunctionsPrototype
+ * @{
+ */
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __USBD_CONF_TEMPLATE_H */
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/cdc-dials/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_core.h b/cdc-dials/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_core.h new file mode 100644 index 0000000..6550cd7 --- /dev/null +++ b/cdc-dials/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_core.h @@ -0,0 +1,167 @@ +/**
+ ******************************************************************************
+ * @file usbd_core.h
+ * @author MCD Application Team
+ * @version V2.4.2
+ * @date 11-December-2015
+ * @brief Header file for usbd_core.c file
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT 2015 STMicroelectronics</center></h2>
+ *
+ * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.st.com/software_license_agreement_liberty_v2
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USBD_CORE_H
+#define __USBD_CORE_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_conf.h"
+#include "usbd_def.h"
+#include "usbd_ioreq.h"
+#include "usbd_ctlreq.h"
+
+/** @addtogroup STM32_USB_DEVICE_LIBRARY
+ * @{
+ */
+
+/** @defgroup USBD_CORE
+ * @brief This file is the Header file for usbd_core.c file
+ * @{
+ */
+
+
+/** @defgroup USBD_CORE_Exported_Defines
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_CORE_Exported_TypesDefinitions
+ * @{
+ */
+
+
+/**
+ * @}
+ */
+
+
+
+/** @defgroup USBD_CORE_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_CORE_Exported_Variables
+ * @{
+ */
+#define USBD_SOF USBD_LL_SOF
+/**
+ * @}
+ */
+
+/** @defgroup USBD_CORE_Exported_FunctionsPrototype
+ * @{
+ */
+USBD_StatusTypeDef USBD_Init(USBD_HandleTypeDef *pdev, USBD_DescriptorsTypeDef *pdesc, uint8_t id);
+USBD_StatusTypeDef USBD_DeInit(USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_Start (USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_Stop (USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_RegisterClass(USBD_HandleTypeDef *pdev, USBD_ClassTypeDef *pclass);
+
+USBD_StatusTypeDef USBD_RunTestMode (USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_SetClassConfig(USBD_HandleTypeDef *pdev, uint8_t cfgidx);
+USBD_StatusTypeDef USBD_ClrClassConfig(USBD_HandleTypeDef *pdev, uint8_t cfgidx);
+
+USBD_StatusTypeDef USBD_LL_SetupStage(USBD_HandleTypeDef *pdev, uint8_t *psetup);
+USBD_StatusTypeDef USBD_LL_DataOutStage(USBD_HandleTypeDef *pdev , uint8_t epnum, uint8_t *pdata);
+USBD_StatusTypeDef USBD_LL_DataInStage(USBD_HandleTypeDef *pdev , uint8_t epnum, uint8_t *pdata);
+
+USBD_StatusTypeDef USBD_LL_Reset(USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_LL_SetSpeed(USBD_HandleTypeDef *pdev, USBD_SpeedTypeDef speed);
+USBD_StatusTypeDef USBD_LL_Suspend(USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_LL_Resume(USBD_HandleTypeDef *pdev);
+
+USBD_StatusTypeDef USBD_LL_SOF(USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_LL_IsoINIncomplete(USBD_HandleTypeDef *pdev, uint8_t epnum);
+USBD_StatusTypeDef USBD_LL_IsoOUTIncomplete(USBD_HandleTypeDef *pdev, uint8_t epnum);
+
+USBD_StatusTypeDef USBD_LL_DevConnected(USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_LL_DevDisconnected(USBD_HandleTypeDef *pdev);
+
+/* USBD Low Level Driver */
+USBD_StatusTypeDef USBD_LL_Init (USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_LL_DeInit (USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_LL_Start(USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_LL_Stop (USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_LL_OpenEP (USBD_HandleTypeDef *pdev,
+ uint8_t ep_addr,
+ uint8_t ep_type,
+ uint16_t ep_mps);
+
+USBD_StatusTypeDef USBD_LL_CloseEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr);
+USBD_StatusTypeDef USBD_LL_FlushEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr);
+USBD_StatusTypeDef USBD_LL_StallEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr);
+USBD_StatusTypeDef USBD_LL_ClearStallEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr);
+uint8_t USBD_LL_IsStallEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr);
+USBD_StatusTypeDef USBD_LL_SetUSBAddress (USBD_HandleTypeDef *pdev, uint8_t dev_addr);
+USBD_StatusTypeDef USBD_LL_Transmit (USBD_HandleTypeDef *pdev,
+ uint8_t ep_addr,
+ uint8_t *pbuf,
+ uint16_t size);
+
+USBD_StatusTypeDef USBD_LL_PrepareReceive(USBD_HandleTypeDef *pdev,
+ uint8_t ep_addr,
+ uint8_t *pbuf,
+ uint16_t size);
+
+uint32_t USBD_LL_GetRxDataSize (USBD_HandleTypeDef *pdev, uint8_t ep_addr);
+void USBD_LL_Delay (uint32_t Delay);
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __USBD_CORE_H */
+
+/**
+ * @}
+ */
+
+/**
+* @}
+*/
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
+
+
diff --git a/cdc-dials/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ctlreq.h b/cdc-dials/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ctlreq.h new file mode 100644 index 0000000..66380fd --- /dev/null +++ b/cdc-dials/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ctlreq.h @@ -0,0 +1,113 @@ +/**
+ ******************************************************************************
+ * @file usbd_req.h
+ * @author MCD Application Team
+ * @version V2.4.2
+ * @date 11-December-2015
+ * @brief Header file for the usbd_req.c file
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT 2015 STMicroelectronics</center></h2>
+ *
+ * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.st.com/software_license_agreement_liberty_v2
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USB_REQUEST_H
+#define __USB_REQUEST_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_def.h"
+
+
+/** @addtogroup STM32_USB_DEVICE_LIBRARY
+ * @{
+ */
+
+/** @defgroup USBD_REQ
+ * @brief header file for the usbd_req.c file
+ * @{
+ */
+
+/** @defgroup USBD_REQ_Exported_Defines
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_REQ_Exported_Types
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+
+/** @defgroup USBD_REQ_Exported_Macros
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup USBD_REQ_Exported_Variables
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup USBD_REQ_Exported_FunctionsPrototype
+ * @{
+ */
+
+USBD_StatusTypeDef USBD_StdDevReq (USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req);
+USBD_StatusTypeDef USBD_StdItfReq (USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req);
+USBD_StatusTypeDef USBD_StdEPReq (USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req);
+
+
+void USBD_CtlError (USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req);
+
+void USBD_ParseSetupRequest (USBD_SetupReqTypedef *req, uint8_t *pdata);
+
+void USBD_GetString (uint8_t *desc, uint8_t *unicode, uint16_t *len);
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __USB_REQUEST_H */
+
+/**
+ * @}
+ */
+
+/**
+* @}
+*/
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/cdc-dials/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_def.h b/cdc-dials/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_def.h new file mode 100644 index 0000000..969e324 --- /dev/null +++ b/cdc-dials/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_def.h @@ -0,0 +1,330 @@ +/**
+ ******************************************************************************
+ * @file usbd_def.h
+ * @author MCD Application Team
+ * @version V2.4.2
+ * @date 11-December-2015
+ * @brief General defines for the usb device library
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT 2015 STMicroelectronics</center></h2>
+ *
+ * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.st.com/software_license_agreement_liberty_v2
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USBD_DEF_H
+#define __USBD_DEF_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_conf.h"
+
+/** @addtogroup STM32_USBD_DEVICE_LIBRARY
+ * @{
+ */
+
+/** @defgroup USB_DEF
+ * @brief general defines for the usb device library file
+ * @{
+ */
+
+/** @defgroup USB_DEF_Exported_Defines
+ * @{
+ */
+
+#ifndef NULL
+#define NULL 0
+#endif
+
+
+#define USB_LEN_DEV_QUALIFIER_DESC 0x0A
+#define USB_LEN_DEV_DESC 0x12
+#define USB_LEN_CFG_DESC 0x09
+#define USB_LEN_IF_DESC 0x09
+#define USB_LEN_EP_DESC 0x07
+#define USB_LEN_OTG_DESC 0x03
+#define USB_LEN_LANGID_STR_DESC 0x04
+#define USB_LEN_OTHER_SPEED_DESC_SIZ 0x09
+
+#define USBD_IDX_LANGID_STR 0x00
+#define USBD_IDX_MFC_STR 0x01
+#define USBD_IDX_PRODUCT_STR 0x02
+#define USBD_IDX_SERIAL_STR 0x03
+#define USBD_IDX_CONFIG_STR 0x04
+#define USBD_IDX_INTERFACE_STR 0x05
+
+#define USB_REQ_TYPE_STANDARD 0x00
+#define USB_REQ_TYPE_CLASS 0x20
+#define USB_REQ_TYPE_VENDOR 0x40
+#define USB_REQ_TYPE_MASK 0x60
+
+#define USB_REQ_RECIPIENT_DEVICE 0x00
+#define USB_REQ_RECIPIENT_INTERFACE 0x01
+#define USB_REQ_RECIPIENT_ENDPOINT 0x02
+#define USB_REQ_RECIPIENT_MASK 0x03
+
+#define USB_REQ_GET_STATUS 0x00
+#define USB_REQ_CLEAR_FEATURE 0x01
+#define USB_REQ_SET_FEATURE 0x03
+#define USB_REQ_SET_ADDRESS 0x05
+#define USB_REQ_GET_DESCRIPTOR 0x06
+#define USB_REQ_SET_DESCRIPTOR 0x07
+#define USB_REQ_GET_CONFIGURATION 0x08
+#define USB_REQ_SET_CONFIGURATION 0x09
+#define USB_REQ_GET_INTERFACE 0x0A
+#define USB_REQ_SET_INTERFACE 0x0B
+#define USB_REQ_SYNCH_FRAME 0x0C
+
+#define USB_DESC_TYPE_DEVICE 1
+#define USB_DESC_TYPE_CONFIGURATION 2
+#define USB_DESC_TYPE_STRING 3
+#define USB_DESC_TYPE_INTERFACE 4
+#define USB_DESC_TYPE_ENDPOINT 5
+#define USB_DESC_TYPE_DEVICE_QUALIFIER 6
+#define USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION 7
+#define USB_DESC_TYPE_BOS 0x0F
+
+#define USB_CONFIG_REMOTE_WAKEUP 2
+#define USB_CONFIG_SELF_POWERED 1
+
+#define USB_FEATURE_EP_HALT 0
+#define USB_FEATURE_REMOTE_WAKEUP 1
+#define USB_FEATURE_TEST_MODE 2
+
+#define USB_DEVICE_CAPABITY_TYPE 0x10
+
+#define USB_HS_MAX_PACKET_SIZE 512
+#define USB_FS_MAX_PACKET_SIZE 64
+#define USB_MAX_EP0_SIZE 64
+
+/* Device Status */
+#define USBD_STATE_DEFAULT 1
+#define USBD_STATE_ADDRESSED 2
+#define USBD_STATE_CONFIGURED 3
+#define USBD_STATE_SUSPENDED 4
+
+
+/* EP0 State */
+#define USBD_EP0_IDLE 0
+#define USBD_EP0_SETUP 1
+#define USBD_EP0_DATA_IN 2
+#define USBD_EP0_DATA_OUT 3
+#define USBD_EP0_STATUS_IN 4
+#define USBD_EP0_STATUS_OUT 5
+#define USBD_EP0_STALL 6
+
+#define USBD_EP_TYPE_CTRL 0
+#define USBD_EP_TYPE_ISOC 1
+#define USBD_EP_TYPE_BULK 2
+#define USBD_EP_TYPE_INTR 3
+
+
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_DEF_Exported_TypesDefinitions
+ * @{
+ */
+
+typedef struct usb_setup_req
+{
+
+ uint8_t bmRequest;
+ uint8_t bRequest;
+ uint16_t wValue;
+ uint16_t wIndex;
+ uint16_t wLength;
+}USBD_SetupReqTypedef;
+
+struct _USBD_HandleTypeDef;
+
+typedef struct _Device_cb
+{
+ uint8_t (*Init) (struct _USBD_HandleTypeDef *pdev , uint8_t cfgidx);
+ uint8_t (*DeInit) (struct _USBD_HandleTypeDef *pdev , uint8_t cfgidx);
+ /* Control Endpoints*/
+ uint8_t (*Setup) (struct _USBD_HandleTypeDef *pdev , USBD_SetupReqTypedef *req);
+ uint8_t (*EP0_TxSent) (struct _USBD_HandleTypeDef *pdev );
+ uint8_t (*EP0_RxReady) (struct _USBD_HandleTypeDef *pdev );
+ /* Class Specific Endpoints*/
+ uint8_t (*DataIn) (struct _USBD_HandleTypeDef *pdev , uint8_t epnum);
+ uint8_t (*DataOut) (struct _USBD_HandleTypeDef *pdev , uint8_t epnum);
+ uint8_t (*SOF) (struct _USBD_HandleTypeDef *pdev);
+ uint8_t (*IsoINIncomplete) (struct _USBD_HandleTypeDef *pdev , uint8_t epnum);
+ uint8_t (*IsoOUTIncomplete) (struct _USBD_HandleTypeDef *pdev , uint8_t epnum);
+
+ uint8_t *(*GetHSConfigDescriptor)(uint16_t *length);
+ uint8_t *(*GetFSConfigDescriptor)(uint16_t *length);
+ uint8_t *(*GetOtherSpeedConfigDescriptor)(uint16_t *length);
+ uint8_t *(*GetDeviceQualifierDescriptor)(uint16_t *length);
+#if (USBD_SUPPORT_USER_STRING == 1)
+ uint8_t *(*GetUsrStrDescriptor)(struct _USBD_HandleTypeDef *pdev ,uint8_t index, uint16_t *length);
+#endif
+
+} USBD_ClassTypeDef;
+
+/* Following USB Device Speed */
+typedef enum
+{
+ USBD_SPEED_HIGH = 0,
+ USBD_SPEED_FULL = 1,
+ USBD_SPEED_LOW = 2,
+}USBD_SpeedTypeDef;
+
+/* Following USB Device status */
+typedef enum {
+ USBD_OK = 0,
+ USBD_BUSY,
+ USBD_FAIL,
+}USBD_StatusTypeDef;
+
+/* USB Device descriptors structure */
+typedef struct
+{
+ uint8_t *(*GetDeviceDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length);
+ uint8_t *(*GetLangIDStrDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length);
+ uint8_t *(*GetManufacturerStrDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length);
+ uint8_t *(*GetProductStrDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length);
+ uint8_t *(*GetSerialStrDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length);
+ uint8_t *(*GetConfigurationStrDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length);
+ uint8_t *(*GetInterfaceStrDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length);
+#if (USBD_LPM_ENABLED == 1)
+ uint8_t *(*GetBOSDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length);
+#endif
+} USBD_DescriptorsTypeDef;
+
+/* USB Device handle structure */
+typedef struct
+{
+ uint32_t status;
+ uint32_t total_length;
+ uint32_t rem_length;
+ uint32_t maxpacket;
+} USBD_EndpointTypeDef;
+
+/* USB Device handle structure */
+typedef struct _USBD_HandleTypeDef
+{
+ uint8_t id;
+ uint32_t dev_config;
+ uint32_t dev_default_config;
+ uint32_t dev_config_status;
+ USBD_SpeedTypeDef dev_speed;
+ USBD_EndpointTypeDef ep_in[15];
+ USBD_EndpointTypeDef ep_out[15];
+ uint32_t ep0_state;
+ uint32_t ep0_data_len;
+ uint8_t dev_state;
+ uint8_t dev_old_state;
+ uint8_t dev_address;
+ uint8_t dev_connection_status;
+ uint8_t dev_test_mode;
+ uint32_t dev_remote_wakeup;
+
+ USBD_SetupReqTypedef request;
+ USBD_DescriptorsTypeDef *pDesc;
+ USBD_ClassTypeDef *pClass;
+ void *pClassData;
+ void *pUserData;
+ void *pData;
+} USBD_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+
+
+/** @defgroup USBD_DEF_Exported_Macros
+ * @{
+ */
+#define SWAPBYTE(addr) (((uint16_t)(*((uint8_t *)(addr)))) + \
+ (((uint16_t)(*(((uint8_t *)(addr)) + 1))) << 8))
+
+#define LOBYTE(x) ((uint8_t)(x & 0x00FF))
+#define HIBYTE(x) ((uint8_t)((x & 0xFF00) >>8))
+#define MIN(a, b) (((a) < (b)) ? (a) : (b))
+#define MAX(a, b) (((a) > (b)) ? (a) : (b))
+
+
+#if defined ( __GNUC__ )
+ #ifndef __weak
+ #define __weak __attribute__((weak))
+ #endif /* __weak */
+ #ifndef __packed
+ #define __packed __attribute__((__packed__))
+ #endif /* __packed */
+#endif /* __GNUC__ */
+
+
+/* In HS mode and when the DMA is used, all variables and data structures dealing
+ with the DMA during the transaction process should be 4-bytes aligned */
+
+#if defined (__GNUC__) /* GNU Compiler */
+ #define __ALIGN_END __attribute__ ((aligned (4)))
+ #define __ALIGN_BEGIN
+#else
+ #define __ALIGN_END
+ #if defined (__CC_ARM) /* ARM Compiler */
+ #define __ALIGN_BEGIN __align(4)
+ #elif defined (__ICCARM__) /* IAR Compiler */
+ #define __ALIGN_BEGIN
+ #elif defined (__TASKING__) /* TASKING Compiler */
+ #define __ALIGN_BEGIN __align(4)
+ #endif /* __CC_ARM */
+#endif /* __GNUC__ */
+
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_DEF_Exported_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_DEF_Exported_FunctionsPrototype
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __USBD_DEF_H */
+
+/**
+ * @}
+ */
+
+/**
+* @}
+*/
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/cdc-dials/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ioreq.h b/cdc-dials/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ioreq.h new file mode 100644 index 0000000..dbf8ca1 --- /dev/null +++ b/cdc-dials/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ioreq.h @@ -0,0 +1,128 @@ +/**
+ ******************************************************************************
+ * @file usbd_ioreq.h
+ * @author MCD Application Team
+ * @version V2.4.2
+ * @date 11-December-2015
+ * @brief Header file for the usbd_ioreq.c file
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT 2015 STMicroelectronics</center></h2>
+ *
+ * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.st.com/software_license_agreement_liberty_v2
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USBD_IOREQ_H
+#define __USBD_IOREQ_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_def.h"
+#include "usbd_core.h"
+
+/** @addtogroup STM32_USB_DEVICE_LIBRARY
+ * @{
+ */
+
+/** @defgroup USBD_IOREQ
+ * @brief header file for the usbd_ioreq.c file
+ * @{
+ */
+
+/** @defgroup USBD_IOREQ_Exported_Defines
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_IOREQ_Exported_Types
+ * @{
+ */
+
+
+/**
+ * @}
+ */
+
+
+
+/** @defgroup USBD_IOREQ_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_IOREQ_Exported_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_IOREQ_Exported_FunctionsPrototype
+ * @{
+ */
+
+USBD_StatusTypeDef USBD_CtlSendData (USBD_HandleTypeDef *pdev,
+ uint8_t *buf,
+ uint16_t len);
+
+USBD_StatusTypeDef USBD_CtlContinueSendData (USBD_HandleTypeDef *pdev,
+ uint8_t *pbuf,
+ uint16_t len);
+
+USBD_StatusTypeDef USBD_CtlPrepareRx (USBD_HandleTypeDef *pdev,
+ uint8_t *pbuf,
+ uint16_t len);
+
+USBD_StatusTypeDef USBD_CtlContinueRx (USBD_HandleTypeDef *pdev,
+ uint8_t *pbuf,
+ uint16_t len);
+
+USBD_StatusTypeDef USBD_CtlSendStatus (USBD_HandleTypeDef *pdev);
+
+USBD_StatusTypeDef USBD_CtlReceiveStatus (USBD_HandleTypeDef *pdev);
+
+uint16_t USBD_GetRxCount (USBD_HandleTypeDef *pdev ,
+ uint8_t epnum);
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __USBD_IOREQ_H */
+
+/**
+ * @}
+ */
+
+/**
+* @}
+*/
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/cdc-dials/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_conf_template.c b/cdc-dials/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_conf_template.c new file mode 100644 index 0000000..613409d --- /dev/null +++ b/cdc-dials/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_conf_template.c @@ -0,0 +1,212 @@ +/**
+ ******************************************************************************
+ * @file usbd_conf_template.c
+ * @author MCD Application Team
+ * @version V2.4.2
+ * @date 11-December-2015
+ * @brief USB Device configuration and interface file
+ * This template should be copied to the user folder, renamed and customized
+ * following user needs.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT 2015 STMicroelectronics</center></h2>
+ *
+ * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.st.com/software_license_agreement_liberty_v2
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_core.h"
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/**
+ * @brief Initializes the Low Level portion of the Device driver.
+ * @param pdev: Device handle
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_LL_Init(USBD_HandleTypeDef *pdev)
+{
+ return USBD_OK;
+}
+
+/**
+ * @brief De-Initializes the Low Level portion of the Device driver.
+ * @param pdev: Device handle
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_LL_DeInit(USBD_HandleTypeDef *pdev)
+{
+ return USBD_OK;
+}
+
+/**
+ * @brief Starts the Low Level portion of the Device driver.
+ * @param pdev: Device handle
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_LL_Start(USBD_HandleTypeDef *pdev)
+{
+ return USBD_OK;
+}
+
+/**
+ * @brief Stops the Low Level portion of the Device driver.
+ * @param pdev: Device handle
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_LL_Stop(USBD_HandleTypeDef *pdev)
+{
+ return USBD_OK;
+}
+
+/**
+ * @brief Opens an endpoint of the Low Level Driver.
+ * @param pdev: Device handle
+ * @param ep_addr: Endpoint Number
+ * @param ep_type: Endpoint Type
+ * @param ep_mps: Endpoint Max Packet Size
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_LL_OpenEP(USBD_HandleTypeDef *pdev,
+ uint8_t ep_addr,
+ uint8_t ep_type,
+ uint16_t ep_mps)
+{
+ return USBD_OK;
+}
+
+/**
+ * @brief Closes an endpoint of the Low Level Driver.
+ * @param pdev: Device handle
+ * @param ep_addr: Endpoint Number
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_LL_CloseEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
+{
+ return USBD_OK;
+}
+
+/**
+ * @brief Flushes an endpoint of the Low Level Driver.
+ * @param pdev: Device handle
+ * @param ep_addr: Endpoint Number
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_LL_FlushEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
+{
+ return USBD_OK;
+}
+
+/**
+ * @brief Sets a Stall condition on an endpoint of the Low Level Driver.
+ * @param pdev: Device handle
+ * @param ep_addr: Endpoint Number
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_LL_StallEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
+{
+ return USBD_OK;
+}
+
+/**
+ * @brief Clears a Stall condition on an endpoint of the Low Level Driver.
+ * @param pdev: Device handle
+ * @param ep_addr: Endpoint Number
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_LL_ClearStallEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
+{
+ return USBD_OK;
+}
+
+/**
+ * @brief Returns Stall condition.
+ * @param pdev: Device handle
+ * @param ep_addr: Endpoint Number
+ * @retval Stall (1: Yes, 0: No)
+ */
+uint8_t USBD_LL_IsStallEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
+{
+ return 0;
+}
+
+/**
+ * @brief Assigns a USB address to the device.
+ * @param pdev: Device handle
+ * @param ep_addr: Endpoint Number
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_LL_SetUSBAddress(USBD_HandleTypeDef *pdev, uint8_t dev_addr)
+{
+ return USBD_OK;
+}
+
+/**
+ * @brief Transmits data over an endpoint.
+ * @param pdev: Device handle
+ * @param ep_addr: Endpoint Number
+ * @param pbuf: Pointer to data to be sent
+ * @param size: Data size
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_LL_Transmit(USBD_HandleTypeDef *pdev,
+ uint8_t ep_addr,
+ uint8_t *pbuf,
+ uint16_t size)
+{
+ return USBD_OK;
+}
+
+/**
+ * @brief Prepares an endpoint for reception.
+ * @param pdev: Device handle
+ * @param ep_addr: Endpoint Number
+ * @param pbuf: Pointer to data to be received
+ * @param size: Data size
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_LL_PrepareReceive(USBD_HandleTypeDef *pdev,
+ uint8_t ep_addr,
+ uint8_t *pbuf,
+ uint16_t size)
+{
+ return USBD_OK;
+}
+
+/**
+ * @brief Returns the last transferred packet size.
+ * @param pdev: Device handle
+ * @param ep_addr: Endpoint Number
+ * @retval Recived Data Size
+ */
+uint32_t USBD_LL_GetRxDataSize(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
+{
+ return 0;
+}
+
+/**
+ * @brief Delays routine for the USB Device Library.
+ * @param Delay: Delay in ms
+ * @retval None
+ */
+void USBD_LL_Delay(uint32_t Delay)
+{
+}
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/cdc-dials/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.c b/cdc-dials/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.c new file mode 100644 index 0000000..86fc2de --- /dev/null +++ b/cdc-dials/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.c @@ -0,0 +1,565 @@ +/**
+ ******************************************************************************
+ * @file usbd_core.c
+ * @author MCD Application Team
+ * @version V2.4.2
+ * @date 11-December-2015
+ * @brief This file provides all the USBD core functions.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT 2015 STMicroelectronics</center></h2>
+ *
+ * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.st.com/software_license_agreement_liberty_v2
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_core.h"
+
+/** @addtogroup STM32_USBD_DEVICE_LIBRARY
+* @{
+*/
+
+
+/** @defgroup USBD_CORE
+* @brief usbd core module
+* @{
+*/
+
+/** @defgroup USBD_CORE_Private_TypesDefinitions
+* @{
+*/
+/**
+* @}
+*/
+
+
+/** @defgroup USBD_CORE_Private_Defines
+* @{
+*/
+
+/**
+* @}
+*/
+
+
+/** @defgroup USBD_CORE_Private_Macros
+* @{
+*/
+/**
+* @}
+*/
+
+
+
+
+/** @defgroup USBD_CORE_Private_FunctionPrototypes
+* @{
+*/
+
+/**
+* @}
+*/
+
+/** @defgroup USBD_CORE_Private_Variables
+* @{
+*/
+
+/**
+* @}
+*/
+
+/** @defgroup USBD_CORE_Private_Functions
+* @{
+*/
+
+/**
+* @brief USBD_Init
+* Initializes the device stack and load the class driver
+* @param pdev: device instance
+* @param pdesc: Descriptor structure address
+* @param id: Low level core index
+* @retval None
+*/
+USBD_StatusTypeDef USBD_Init(USBD_HandleTypeDef *pdev, USBD_DescriptorsTypeDef *pdesc, uint8_t id)
+{
+ /* Check whether the USB Host handle is valid */
+ if(pdev == NULL)
+ {
+ USBD_ErrLog("Invalid Device handle");
+ return USBD_FAIL;
+ }
+
+ /* Unlink previous class*/
+ if(pdev->pClass != NULL)
+ {
+ pdev->pClass = NULL;
+ }
+
+ /* Assign USBD Descriptors */
+ if(pdesc != NULL)
+ {
+ pdev->pDesc = pdesc;
+ }
+
+ /* Set Device initial State */
+ pdev->dev_state = USBD_STATE_DEFAULT;
+ pdev->id = id;
+ /* Initialize low level driver */
+ USBD_LL_Init(pdev);
+
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_DeInit
+* Re-Initialize th device library
+* @param pdev: device instance
+* @retval status: status
+*/
+USBD_StatusTypeDef USBD_DeInit(USBD_HandleTypeDef *pdev)
+{
+ /* Set Default State */
+ pdev->dev_state = USBD_STATE_DEFAULT;
+
+ /* Free Class Resources */
+ pdev->pClass->DeInit(pdev, pdev->dev_config);
+
+ /* Stop the low level driver */
+ USBD_LL_Stop(pdev);
+
+ /* Initialize low level driver */
+ USBD_LL_DeInit(pdev);
+
+ return USBD_OK;
+}
+
+
+/**
+ * @brief USBD_RegisterClass
+ * Link class driver to Device Core.
+ * @param pDevice : Device Handle
+ * @param pclass: Class handle
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_RegisterClass(USBD_HandleTypeDef *pdev, USBD_ClassTypeDef *pclass)
+{
+ USBD_StatusTypeDef status = USBD_OK;
+ if(pclass != 0)
+ {
+ /* link the class to the USB Device handle */
+ pdev->pClass = pclass;
+ status = USBD_OK;
+ }
+ else
+ {
+ USBD_ErrLog("Invalid Class handle");
+ status = USBD_FAIL;
+ }
+
+ return status;
+}
+
+/**
+ * @brief USBD_Start
+ * Start the USB Device Core.
+ * @param pdev: Device Handle
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_Start (USBD_HandleTypeDef *pdev)
+{
+
+ /* Start the low level driver */
+ USBD_LL_Start(pdev);
+
+ return USBD_OK;
+}
+
+/**
+ * @brief USBD_Stop
+ * Stop the USB Device Core.
+ * @param pdev: Device Handle
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_Stop (USBD_HandleTypeDef *pdev)
+{
+ /* Free Class Resources */
+ pdev->pClass->DeInit(pdev, pdev->dev_config);
+
+ /* Stop the low level driver */
+ USBD_LL_Stop(pdev);
+
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_RunTestMode
+* Launch test mode process
+* @param pdev: device instance
+* @retval status
+*/
+USBD_StatusTypeDef USBD_RunTestMode (USBD_HandleTypeDef *pdev)
+{
+ return USBD_OK;
+}
+
+
+/**
+* @brief USBD_SetClassConfig
+* Configure device and start the interface
+* @param pdev: device instance
+* @param cfgidx: configuration index
+* @retval status
+*/
+
+USBD_StatusTypeDef USBD_SetClassConfig(USBD_HandleTypeDef *pdev, uint8_t cfgidx)
+{
+ USBD_StatusTypeDef ret = USBD_FAIL;
+
+ if(pdev->pClass != NULL)
+ {
+ /* Set configuration and Start the Class*/
+ if(pdev->pClass->Init(pdev, cfgidx) == 0)
+ {
+ ret = USBD_OK;
+ }
+ }
+ return ret;
+}
+
+/**
+* @brief USBD_ClrClassConfig
+* Clear current configuration
+* @param pdev: device instance
+* @param cfgidx: configuration index
+* @retval status: USBD_StatusTypeDef
+*/
+USBD_StatusTypeDef USBD_ClrClassConfig(USBD_HandleTypeDef *pdev, uint8_t cfgidx)
+{
+ /* Clear configuration and De-initialize the Class process*/
+ pdev->pClass->DeInit(pdev, cfgidx);
+ return USBD_OK;
+}
+
+
+/**
+* @brief USBD_SetupStage
+* Handle the setup stage
+* @param pdev: device instance
+* @retval status
+*/
+USBD_StatusTypeDef USBD_LL_SetupStage(USBD_HandleTypeDef *pdev, uint8_t *psetup)
+{
+
+ USBD_ParseSetupRequest(&pdev->request, psetup);
+
+ pdev->ep0_state = USBD_EP0_SETUP;
+ pdev->ep0_data_len = pdev->request.wLength;
+
+ switch (pdev->request.bmRequest & 0x1F)
+ {
+ case USB_REQ_RECIPIENT_DEVICE:
+ USBD_StdDevReq (pdev, &pdev->request);
+ break;
+
+ case USB_REQ_RECIPIENT_INTERFACE:
+ USBD_StdItfReq(pdev, &pdev->request);
+ break;
+
+ case USB_REQ_RECIPIENT_ENDPOINT:
+ USBD_StdEPReq(pdev, &pdev->request);
+ break;
+
+ default:
+ USBD_LL_StallEP(pdev , pdev->request.bmRequest & 0x80);
+ break;
+ }
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_DataOutStage
+* Handle data OUT stage
+* @param pdev: device instance
+* @param epnum: endpoint index
+* @retval status
+*/
+USBD_StatusTypeDef USBD_LL_DataOutStage(USBD_HandleTypeDef *pdev , uint8_t epnum, uint8_t *pdata)
+{
+ USBD_EndpointTypeDef *pep;
+
+ if(epnum == 0)
+ {
+ pep = &pdev->ep_out[0];
+
+ if ( pdev->ep0_state == USBD_EP0_DATA_OUT)
+ {
+ if(pep->rem_length > pep->maxpacket)
+ {
+ pep->rem_length -= pep->maxpacket;
+
+ USBD_CtlContinueRx (pdev,
+ pdata,
+ MIN(pep->rem_length ,pep->maxpacket));
+ }
+ else
+ {
+ if((pdev->pClass->EP0_RxReady != NULL)&&
+ (pdev->dev_state == USBD_STATE_CONFIGURED))
+ {
+ pdev->pClass->EP0_RxReady(pdev);
+ }
+ USBD_CtlSendStatus(pdev);
+ }
+ }
+ }
+ else if((pdev->pClass->DataOut != NULL)&&
+ (pdev->dev_state == USBD_STATE_CONFIGURED))
+ {
+ pdev->pClass->DataOut(pdev, epnum);
+ }
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_DataInStage
+* Handle data in stage
+* @param pdev: device instance
+* @param epnum: endpoint index
+* @retval status
+*/
+USBD_StatusTypeDef USBD_LL_DataInStage(USBD_HandleTypeDef *pdev ,uint8_t epnum, uint8_t *pdata)
+{
+ USBD_EndpointTypeDef *pep;
+
+ if(epnum == 0)
+ {
+ pep = &pdev->ep_in[0];
+
+ if ( pdev->ep0_state == USBD_EP0_DATA_IN)
+ {
+ if(pep->rem_length > pep->maxpacket)
+ {
+ pep->rem_length -= pep->maxpacket;
+
+ USBD_CtlContinueSendData (pdev,
+ pdata,
+ pep->rem_length);
+
+ /* Prepare endpoint for premature end of transfer */
+ USBD_LL_PrepareReceive (pdev,
+ 0,
+ NULL,
+ 0);
+ }
+ else
+ { /* last packet is MPS multiple, so send ZLP packet */
+ if((pep->total_length % pep->maxpacket == 0) &&
+ (pep->total_length >= pep->maxpacket) &&
+ (pep->total_length < pdev->ep0_data_len ))
+ {
+
+ USBD_CtlContinueSendData(pdev , NULL, 0);
+ pdev->ep0_data_len = 0;
+
+ /* Prepare endpoint for premature end of transfer */
+ USBD_LL_PrepareReceive (pdev,
+ 0,
+ NULL,
+ 0);
+ }
+ else
+ {
+ if((pdev->pClass->EP0_TxSent != NULL)&&
+ (pdev->dev_state == USBD_STATE_CONFIGURED))
+ {
+ pdev->pClass->EP0_TxSent(pdev);
+ }
+ USBD_CtlReceiveStatus(pdev);
+ }
+ }
+ }
+ if (pdev->dev_test_mode == 1)
+ {
+ USBD_RunTestMode(pdev);
+ pdev->dev_test_mode = 0;
+ }
+ }
+ else if((pdev->pClass->DataIn != NULL)&&
+ (pdev->dev_state == USBD_STATE_CONFIGURED))
+ {
+ pdev->pClass->DataIn(pdev, epnum);
+ }
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_LL_Reset
+* Handle Reset event
+* @param pdev: device instance
+* @retval status
+*/
+
+USBD_StatusTypeDef USBD_LL_Reset(USBD_HandleTypeDef *pdev)
+{
+ /* Open EP0 OUT */
+ USBD_LL_OpenEP(pdev,
+ 0x00,
+ USBD_EP_TYPE_CTRL,
+ USB_MAX_EP0_SIZE);
+
+ pdev->ep_out[0].maxpacket = USB_MAX_EP0_SIZE;
+
+ /* Open EP0 IN */
+ USBD_LL_OpenEP(pdev,
+ 0x80,
+ USBD_EP_TYPE_CTRL,
+ USB_MAX_EP0_SIZE);
+
+ pdev->ep_in[0].maxpacket = USB_MAX_EP0_SIZE;
+ /* Upon Reset call user call back */
+ pdev->dev_state = USBD_STATE_DEFAULT;
+
+ if (pdev->pClassData)
+ pdev->pClass->DeInit(pdev, pdev->dev_config);
+
+
+ return USBD_OK;
+}
+
+
+
+
+/**
+* @brief USBD_LL_Reset
+* Handle Reset event
+* @param pdev: device instance
+* @retval status
+*/
+USBD_StatusTypeDef USBD_LL_SetSpeed(USBD_HandleTypeDef *pdev, USBD_SpeedTypeDef speed)
+{
+ pdev->dev_speed = speed;
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_Suspend
+* Handle Suspend event
+* @param pdev: device instance
+* @retval status
+*/
+
+USBD_StatusTypeDef USBD_LL_Suspend(USBD_HandleTypeDef *pdev)
+{
+ pdev->dev_old_state = pdev->dev_state;
+ pdev->dev_state = USBD_STATE_SUSPENDED;
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_Resume
+* Handle Resume event
+* @param pdev: device instance
+* @retval status
+*/
+
+USBD_StatusTypeDef USBD_LL_Resume(USBD_HandleTypeDef *pdev)
+{
+ pdev->dev_state = pdev->dev_old_state;
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_SOF
+* Handle SOF event
+* @param pdev: device instance
+* @retval status
+*/
+
+USBD_StatusTypeDef USBD_LL_SOF(USBD_HandleTypeDef *pdev)
+{
+ if(pdev->dev_state == USBD_STATE_CONFIGURED)
+ {
+ if(pdev->pClass->SOF != NULL)
+ {
+ pdev->pClass->SOF(pdev);
+ }
+ }
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_IsoINIncomplete
+* Handle iso in incomplete event
+* @param pdev: device instance
+* @retval status
+*/
+USBD_StatusTypeDef USBD_LL_IsoINIncomplete(USBD_HandleTypeDef *pdev, uint8_t epnum)
+{
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_IsoOUTIncomplete
+* Handle iso out incomplete event
+* @param pdev: device instance
+* @retval status
+*/
+USBD_StatusTypeDef USBD_LL_IsoOUTIncomplete(USBD_HandleTypeDef *pdev, uint8_t epnum)
+{
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_DevConnected
+* Handle device connection event
+* @param pdev: device instance
+* @retval status
+*/
+USBD_StatusTypeDef USBD_LL_DevConnected(USBD_HandleTypeDef *pdev)
+{
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_DevDisconnected
+* Handle device disconnection event
+* @param pdev: device instance
+* @retval status
+*/
+USBD_StatusTypeDef USBD_LL_DevDisconnected(USBD_HandleTypeDef *pdev)
+{
+ /* Free Class Resources */
+ pdev->dev_state = USBD_STATE_DEFAULT;
+ pdev->pClass->DeInit(pdev, pdev->dev_config);
+
+ return USBD_OK;
+}
+/**
+* @}
+*/
+
+
+/**
+* @}
+*/
+
+
+/**
+* @}
+*/
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/cdc-dials/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.c b/cdc-dials/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.c new file mode 100644 index 0000000..7701a6d --- /dev/null +++ b/cdc-dials/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.c @@ -0,0 +1,782 @@ +/**
+ ******************************************************************************
+ * @file usbd_req.c
+ * @author MCD Application Team
+ * @version V2.4.2
+ * @date 11-December-2015
+ * @brief This file provides the standard USB requests following chapter 9.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT 2015 STMicroelectronics</center></h2>
+ *
+ * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.st.com/software_license_agreement_liberty_v2
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_ctlreq.h"
+#include "usbd_ioreq.h"
+
+
+/** @addtogroup STM32_USBD_STATE_DEVICE_LIBRARY
+ * @{
+ */
+
+
+/** @defgroup USBD_REQ
+ * @brief USB standard requests module
+ * @{
+ */
+
+/** @defgroup USBD_REQ_Private_TypesDefinitions
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_REQ_Private_Defines
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_REQ_Private_Macros
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_REQ_Private_Variables
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_REQ_Private_FunctionPrototypes
+ * @{
+ */
+static void USBD_GetDescriptor(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req);
+
+static void USBD_SetAddress(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req);
+
+static void USBD_SetConfig(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req);
+
+static void USBD_GetConfig(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req);
+
+static void USBD_GetStatus(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req);
+
+static void USBD_SetFeature(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req);
+
+static void USBD_ClrFeature(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req);
+
+static uint8_t USBD_GetLen(uint8_t *buf);
+
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_REQ_Private_Functions
+ * @{
+ */
+
+
+/**
+* @brief USBD_StdDevReq
+* Handle standard usb device requests
+* @param pdev: device instance
+* @param req: usb request
+* @retval status
+*/
+USBD_StatusTypeDef USBD_StdDevReq (USBD_HandleTypeDef *pdev , USBD_SetupReqTypedef *req)
+{
+ USBD_StatusTypeDef ret = USBD_OK;
+
+ switch (req->bRequest)
+ {
+ case USB_REQ_GET_DESCRIPTOR:
+
+ USBD_GetDescriptor (pdev, req) ;
+ break;
+
+ case USB_REQ_SET_ADDRESS:
+ USBD_SetAddress(pdev, req);
+ break;
+
+ case USB_REQ_SET_CONFIGURATION:
+ USBD_SetConfig (pdev , req);
+ break;
+
+ case USB_REQ_GET_CONFIGURATION:
+ USBD_GetConfig (pdev , req);
+ break;
+
+ case USB_REQ_GET_STATUS:
+ USBD_GetStatus (pdev , req);
+ break;
+
+
+ case USB_REQ_SET_FEATURE:
+ USBD_SetFeature (pdev , req);
+ break;
+
+ case USB_REQ_CLEAR_FEATURE:
+ USBD_ClrFeature (pdev , req);
+ break;
+
+ default:
+ USBD_CtlError(pdev , req);
+ break;
+ }
+
+ return ret;
+}
+
+/**
+* @brief USBD_StdItfReq
+* Handle standard usb interface requests
+* @param pdev: device instance
+* @param req: usb request
+* @retval status
+*/
+USBD_StatusTypeDef USBD_StdItfReq (USBD_HandleTypeDef *pdev , USBD_SetupReqTypedef *req)
+{
+ USBD_StatusTypeDef ret = USBD_OK;
+
+ switch (pdev->dev_state)
+ {
+ case USBD_STATE_CONFIGURED:
+
+ if (LOBYTE(req->wIndex) <= USBD_MAX_NUM_INTERFACES)
+ {
+ pdev->pClass->Setup (pdev, req);
+
+ if((req->wLength == 0)&& (ret == USBD_OK))
+ {
+ USBD_CtlSendStatus(pdev);
+ }
+ }
+ else
+ {
+ USBD_CtlError(pdev , req);
+ }
+ break;
+
+ default:
+ USBD_CtlError(pdev , req);
+ break;
+ }
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_StdEPReq
+* Handle standard usb endpoint requests
+* @param pdev: device instance
+* @param req: usb request
+* @retval status
+*/
+USBD_StatusTypeDef USBD_StdEPReq (USBD_HandleTypeDef *pdev , USBD_SetupReqTypedef *req)
+{
+
+ uint8_t ep_addr;
+ USBD_StatusTypeDef ret = USBD_OK;
+ USBD_EndpointTypeDef *pep;
+ ep_addr = LOBYTE(req->wIndex);
+
+ /* Check if it is a class request */
+ if ((req->bmRequest & 0x60) == 0x20)
+ {
+ pdev->pClass->Setup (pdev, req);
+
+ return USBD_OK;
+ }
+
+ switch (req->bRequest)
+ {
+
+ case USB_REQ_SET_FEATURE :
+
+ switch (pdev->dev_state)
+ {
+ case USBD_STATE_ADDRESSED:
+ if ((ep_addr != 0x00) && (ep_addr != 0x80))
+ {
+ USBD_LL_StallEP(pdev , ep_addr);
+ }
+ break;
+
+ case USBD_STATE_CONFIGURED:
+ if (req->wValue == USB_FEATURE_EP_HALT)
+ {
+ if ((ep_addr != 0x00) && (ep_addr != 0x80))
+ {
+ USBD_LL_StallEP(pdev , ep_addr);
+
+ }
+ }
+ pdev->pClass->Setup (pdev, req);
+ USBD_CtlSendStatus(pdev);
+
+ break;
+
+ default:
+ USBD_CtlError(pdev , req);
+ break;
+ }
+ break;
+
+ case USB_REQ_CLEAR_FEATURE :
+
+ switch (pdev->dev_state)
+ {
+ case USBD_STATE_ADDRESSED:
+ if ((ep_addr != 0x00) && (ep_addr != 0x80))
+ {
+ USBD_LL_StallEP(pdev , ep_addr);
+ }
+ break;
+
+ case USBD_STATE_CONFIGURED:
+ if (req->wValue == USB_FEATURE_EP_HALT)
+ {
+ if ((ep_addr & 0x7F) != 0x00)
+ {
+ USBD_LL_ClearStallEP(pdev , ep_addr);
+ pdev->pClass->Setup (pdev, req);
+ }
+ USBD_CtlSendStatus(pdev);
+ }
+ break;
+
+ default:
+ USBD_CtlError(pdev , req);
+ break;
+ }
+ break;
+
+ case USB_REQ_GET_STATUS:
+ switch (pdev->dev_state)
+ {
+ case USBD_STATE_ADDRESSED:
+ if ((ep_addr & 0x7F) != 0x00)
+ {
+ USBD_LL_StallEP(pdev , ep_addr);
+ }
+ break;
+
+ case USBD_STATE_CONFIGURED:
+ pep = ((ep_addr & 0x80) == 0x80) ? &pdev->ep_in[ep_addr & 0x7F]:\
+ &pdev->ep_out[ep_addr & 0x7F];
+ if(USBD_LL_IsStallEP(pdev, ep_addr))
+ {
+ pep->status = 0x0001;
+ }
+ else
+ {
+ pep->status = 0x0000;
+ }
+
+ USBD_CtlSendData (pdev,
+ (uint8_t *)&pep->status,
+ 2);
+ break;
+
+ default:
+ USBD_CtlError(pdev , req);
+ break;
+ }
+ break;
+
+ default:
+ break;
+ }
+ return ret;
+}
+/**
+* @brief USBD_GetDescriptor
+* Handle Get Descriptor requests
+* @param pdev: device instance
+* @param req: usb request
+* @retval status
+*/
+static void USBD_GetDescriptor(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req)
+{
+ uint16_t len;
+ uint8_t *pbuf;
+
+
+ switch (req->wValue >> 8)
+ {
+#if (USBD_LPM_ENABLED == 1)
+ case USB_DESC_TYPE_BOS:
+ pbuf = pdev->pDesc->GetBOSDescriptor(pdev->dev_speed, &len);
+ break;
+#endif
+ case USB_DESC_TYPE_DEVICE:
+ pbuf = pdev->pDesc->GetDeviceDescriptor(pdev->dev_speed, &len);
+ break;
+
+ case USB_DESC_TYPE_CONFIGURATION:
+ if(pdev->dev_speed == USBD_SPEED_HIGH )
+ {
+ pbuf = (uint8_t *)pdev->pClass->GetHSConfigDescriptor(&len);
+ pbuf[1] = USB_DESC_TYPE_CONFIGURATION;
+ }
+ else
+ {
+ pbuf = (uint8_t *)pdev->pClass->GetFSConfigDescriptor(&len);
+ pbuf[1] = USB_DESC_TYPE_CONFIGURATION;
+ }
+ break;
+
+ case USB_DESC_TYPE_STRING:
+ switch ((uint8_t)(req->wValue))
+ {
+ case USBD_IDX_LANGID_STR:
+ pbuf = pdev->pDesc->GetLangIDStrDescriptor(pdev->dev_speed, &len);
+ break;
+
+ case USBD_IDX_MFC_STR:
+ pbuf = pdev->pDesc->GetManufacturerStrDescriptor(pdev->dev_speed, &len);
+ break;
+
+ case USBD_IDX_PRODUCT_STR:
+ pbuf = pdev->pDesc->GetProductStrDescriptor(pdev->dev_speed, &len);
+ break;
+
+ case USBD_IDX_SERIAL_STR:
+ pbuf = pdev->pDesc->GetSerialStrDescriptor(pdev->dev_speed, &len);
+ break;
+
+ case USBD_IDX_CONFIG_STR:
+ pbuf = pdev->pDesc->GetConfigurationStrDescriptor(pdev->dev_speed, &len);
+ break;
+
+ case USBD_IDX_INTERFACE_STR:
+ pbuf = pdev->pDesc->GetInterfaceStrDescriptor(pdev->dev_speed, &len);
+ break;
+
+ default:
+#if (USBD_SUPPORT_USER_STRING == 1)
+ pbuf = pdev->pClass->GetUsrStrDescriptor(pdev, (req->wValue) , &len);
+ break;
+#else
+ USBD_CtlError(pdev , req);
+ return;
+#endif
+ }
+ break;
+ case USB_DESC_TYPE_DEVICE_QUALIFIER:
+
+ if(pdev->dev_speed == USBD_SPEED_HIGH )
+ {
+ pbuf = (uint8_t *)pdev->pClass->GetDeviceQualifierDescriptor(&len);
+ break;
+ }
+ else
+ {
+ USBD_CtlError(pdev , req);
+ return;
+ }
+
+ case USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION:
+ if(pdev->dev_speed == USBD_SPEED_HIGH )
+ {
+ pbuf = (uint8_t *)pdev->pClass->GetOtherSpeedConfigDescriptor(&len);
+ pbuf[1] = USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION;
+ break;
+ }
+ else
+ {
+ USBD_CtlError(pdev , req);
+ return;
+ }
+
+ default:
+ USBD_CtlError(pdev , req);
+ return;
+ }
+
+ if((len != 0)&& (req->wLength != 0))
+ {
+
+ len = MIN(len , req->wLength);
+
+ USBD_CtlSendData (pdev,
+ pbuf,
+ len);
+ }
+
+}
+
+/**
+* @brief USBD_SetAddress
+* Set device address
+* @param pdev: device instance
+* @param req: usb request
+* @retval status
+*/
+static void USBD_SetAddress(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req)
+{
+ uint8_t dev_addr;
+
+ if ((req->wIndex == 0) && (req->wLength == 0))
+ {
+ dev_addr = (uint8_t)(req->wValue) & 0x7F;
+
+ if (pdev->dev_state == USBD_STATE_CONFIGURED)
+ {
+ USBD_CtlError(pdev , req);
+ }
+ else
+ {
+ pdev->dev_address = dev_addr;
+ USBD_LL_SetUSBAddress(pdev, dev_addr);
+ USBD_CtlSendStatus(pdev);
+
+ if (dev_addr != 0)
+ {
+ pdev->dev_state = USBD_STATE_ADDRESSED;
+ }
+ else
+ {
+ pdev->dev_state = USBD_STATE_DEFAULT;
+ }
+ }
+ }
+ else
+ {
+ USBD_CtlError(pdev , req);
+ }
+}
+
+/**
+* @brief USBD_SetConfig
+* Handle Set device configuration request
+* @param pdev: device instance
+* @param req: usb request
+* @retval status
+*/
+static void USBD_SetConfig(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req)
+{
+
+ static uint8_t cfgidx;
+
+ cfgidx = (uint8_t)(req->wValue);
+
+ if (cfgidx > USBD_MAX_NUM_CONFIGURATION )
+ {
+ USBD_CtlError(pdev , req);
+ }
+ else
+ {
+ switch (pdev->dev_state)
+ {
+ case USBD_STATE_ADDRESSED:
+ if (cfgidx)
+ {
+ pdev->dev_config = cfgidx;
+ pdev->dev_state = USBD_STATE_CONFIGURED;
+ if(USBD_SetClassConfig(pdev , cfgidx) == USBD_FAIL)
+ {
+ USBD_CtlError(pdev , req);
+ return;
+ }
+ USBD_CtlSendStatus(pdev);
+ }
+ else
+ {
+ USBD_CtlSendStatus(pdev);
+ }
+ break;
+
+ case USBD_STATE_CONFIGURED:
+ if (cfgidx == 0)
+ {
+ pdev->dev_state = USBD_STATE_ADDRESSED;
+ pdev->dev_config = cfgidx;
+ USBD_ClrClassConfig(pdev , cfgidx);
+ USBD_CtlSendStatus(pdev);
+
+ }
+ else if (cfgidx != pdev->dev_config)
+ {
+ /* Clear old configuration */
+ USBD_ClrClassConfig(pdev , pdev->dev_config);
+
+ /* set new configuration */
+ pdev->dev_config = cfgidx;
+ if(USBD_SetClassConfig(pdev , cfgidx) == USBD_FAIL)
+ {
+ USBD_CtlError(pdev , req);
+ return;
+ }
+ USBD_CtlSendStatus(pdev);
+ }
+ else
+ {
+ USBD_CtlSendStatus(pdev);
+ }
+ break;
+
+ default:
+ USBD_CtlError(pdev , req);
+ break;
+ }
+ }
+}
+
+/**
+* @brief USBD_GetConfig
+* Handle Get device configuration request
+* @param pdev: device instance
+* @param req: usb request
+* @retval status
+*/
+static void USBD_GetConfig(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req)
+{
+
+ if (req->wLength != 1)
+ {
+ USBD_CtlError(pdev , req);
+ }
+ else
+ {
+ switch (pdev->dev_state )
+ {
+ case USBD_STATE_ADDRESSED:
+ pdev->dev_default_config = 0;
+ USBD_CtlSendData (pdev,
+ (uint8_t *)&pdev->dev_default_config,
+ 1);
+ break;
+
+ case USBD_STATE_CONFIGURED:
+
+ USBD_CtlSendData (pdev,
+ (uint8_t *)&pdev->dev_config,
+ 1);
+ break;
+
+ default:
+ USBD_CtlError(pdev , req);
+ break;
+ }
+ }
+}
+
+/**
+* @brief USBD_GetStatus
+* Handle Get Status request
+* @param pdev: device instance
+* @param req: usb request
+* @retval status
+*/
+static void USBD_GetStatus(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req)
+{
+
+
+ switch (pdev->dev_state)
+ {
+ case USBD_STATE_ADDRESSED:
+ case USBD_STATE_CONFIGURED:
+
+#if ( USBD_SELF_POWERED == 1)
+ pdev->dev_config_status = USB_CONFIG_SELF_POWERED;
+#else
+ pdev->dev_config_status = 0;
+#endif
+
+ if (pdev->dev_remote_wakeup)
+ {
+ pdev->dev_config_status |= USB_CONFIG_REMOTE_WAKEUP;
+ }
+
+ USBD_CtlSendData (pdev,
+ (uint8_t *)& pdev->dev_config_status,
+ 2);
+ break;
+
+ default :
+ USBD_CtlError(pdev , req);
+ break;
+ }
+}
+
+
+/**
+* @brief USBD_SetFeature
+* Handle Set device feature request
+* @param pdev: device instance
+* @param req: usb request
+* @retval status
+*/
+static void USBD_SetFeature(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req)
+{
+
+ if (req->wValue == USB_FEATURE_REMOTE_WAKEUP)
+ {
+ pdev->dev_remote_wakeup = 1;
+ pdev->pClass->Setup (pdev, req);
+ USBD_CtlSendStatus(pdev);
+ }
+
+}
+
+
+/**
+* @brief USBD_ClrFeature
+* Handle clear device feature request
+* @param pdev: device instance
+* @param req: usb request
+* @retval status
+*/
+static void USBD_ClrFeature(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req)
+{
+ switch (pdev->dev_state)
+ {
+ case USBD_STATE_ADDRESSED:
+ case USBD_STATE_CONFIGURED:
+ if (req->wValue == USB_FEATURE_REMOTE_WAKEUP)
+ {
+ pdev->dev_remote_wakeup = 0;
+ pdev->pClass->Setup (pdev, req);
+ USBD_CtlSendStatus(pdev);
+ }
+ break;
+
+ default :
+ USBD_CtlError(pdev , req);
+ break;
+ }
+}
+
+/**
+* @brief USBD_ParseSetupRequest
+* Copy buffer into setup structure
+* @param pdev: device instance
+* @param req: usb request
+* @retval None
+*/
+
+void USBD_ParseSetupRequest(USBD_SetupReqTypedef *req, uint8_t *pdata)
+{
+ req->bmRequest = *(uint8_t *) (pdata);
+ req->bRequest = *(uint8_t *) (pdata + 1);
+ req->wValue = SWAPBYTE (pdata + 2);
+ req->wIndex = SWAPBYTE (pdata + 4);
+ req->wLength = SWAPBYTE (pdata + 6);
+
+}
+
+/**
+* @brief USBD_CtlError
+* Handle USB low level Error
+* @param pdev: device instance
+* @param req: usb request
+* @retval None
+*/
+
+void USBD_CtlError( USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req)
+{
+ USBD_LL_StallEP(pdev , 0x80);
+ USBD_LL_StallEP(pdev , 0);
+}
+
+
+/**
+ * @brief USBD_GetString
+ * Convert Ascii string into unicode one
+ * @param desc : descriptor buffer
+ * @param unicode : Formatted string buffer (unicode)
+ * @param len : descriptor length
+ * @retval None
+ */
+void USBD_GetString(uint8_t *desc, uint8_t *unicode, uint16_t *len)
+{
+ uint8_t idx = 0;
+
+ if (desc != NULL)
+ {
+ *len = USBD_GetLen(desc) * 2 + 2;
+ unicode[idx++] = *len;
+ unicode[idx++] = USB_DESC_TYPE_STRING;
+
+ while (*desc != '\0')
+ {
+ unicode[idx++] = *desc++;
+ unicode[idx++] = 0x00;
+ }
+ }
+}
+
+/**
+ * @brief USBD_GetLen
+ * return the string length
+ * @param buf : pointer to the ascii string buffer
+ * @retval string length
+ */
+static uint8_t USBD_GetLen(uint8_t *buf)
+{
+ uint8_t len = 0;
+
+ while (*buf != '\0')
+ {
+ len++;
+ buf++;
+ }
+
+ return len;
+}
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/cdc-dials/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.c b/cdc-dials/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.c new file mode 100644 index 0000000..d66d777 --- /dev/null +++ b/cdc-dials/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.c @@ -0,0 +1,236 @@ +/**
+ ******************************************************************************
+ * @file usbd_ioreq.c
+ * @author MCD Application Team
+ * @version V2.4.2
+ * @date 11-December-2015
+ * @brief This file provides the IO requests APIs for control endpoints.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT 2015 STMicroelectronics</center></h2>
+ *
+ * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.st.com/software_license_agreement_liberty_v2
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_ioreq.h"
+
+/** @addtogroup STM32_USB_DEVICE_LIBRARY
+ * @{
+ */
+
+
+/** @defgroup USBD_IOREQ
+ * @brief control I/O requests module
+ * @{
+ */
+
+/** @defgroup USBD_IOREQ_Private_TypesDefinitions
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_IOREQ_Private_Defines
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_IOREQ_Private_Macros
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_IOREQ_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_IOREQ_Private_FunctionPrototypes
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_IOREQ_Private_Functions
+ * @{
+ */
+
+/**
+* @brief USBD_CtlSendData
+* send data on the ctl pipe
+* @param pdev: device instance
+* @param buff: pointer to data buffer
+* @param len: length of data to be sent
+* @retval status
+*/
+USBD_StatusTypeDef USBD_CtlSendData (USBD_HandleTypeDef *pdev,
+ uint8_t *pbuf,
+ uint16_t len)
+{
+ /* Set EP0 State */
+ pdev->ep0_state = USBD_EP0_DATA_IN;
+ pdev->ep_in[0].total_length = len;
+ pdev->ep_in[0].rem_length = len;
+ /* Start the transfer */
+ USBD_LL_Transmit (pdev, 0x00, pbuf, len);
+
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_CtlContinueSendData
+* continue sending data on the ctl pipe
+* @param pdev: device instance
+* @param buff: pointer to data buffer
+* @param len: length of data to be sent
+* @retval status
+*/
+USBD_StatusTypeDef USBD_CtlContinueSendData (USBD_HandleTypeDef *pdev,
+ uint8_t *pbuf,
+ uint16_t len)
+{
+ /* Start the next transfer */
+ USBD_LL_Transmit (pdev, 0x00, pbuf, len);
+
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_CtlPrepareRx
+* receive data on the ctl pipe
+* @param pdev: device instance
+* @param buff: pointer to data buffer
+* @param len: length of data to be received
+* @retval status
+*/
+USBD_StatusTypeDef USBD_CtlPrepareRx (USBD_HandleTypeDef *pdev,
+ uint8_t *pbuf,
+ uint16_t len)
+{
+ /* Set EP0 State */
+ pdev->ep0_state = USBD_EP0_DATA_OUT;
+ pdev->ep_out[0].total_length = len;
+ pdev->ep_out[0].rem_length = len;
+ /* Start the transfer */
+ USBD_LL_PrepareReceive (pdev,
+ 0,
+ pbuf,
+ len);
+
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_CtlContinueRx
+* continue receive data on the ctl pipe
+* @param pdev: device instance
+* @param buff: pointer to data buffer
+* @param len: length of data to be received
+* @retval status
+*/
+USBD_StatusTypeDef USBD_CtlContinueRx (USBD_HandleTypeDef *pdev,
+ uint8_t *pbuf,
+ uint16_t len)
+{
+
+ USBD_LL_PrepareReceive (pdev,
+ 0,
+ pbuf,
+ len);
+ return USBD_OK;
+}
+/**
+* @brief USBD_CtlSendStatus
+* send zero lzngth packet on the ctl pipe
+* @param pdev: device instance
+* @retval status
+*/
+USBD_StatusTypeDef USBD_CtlSendStatus (USBD_HandleTypeDef *pdev)
+{
+
+ /* Set EP0 State */
+ pdev->ep0_state = USBD_EP0_STATUS_IN;
+
+ /* Start the transfer */
+ USBD_LL_Transmit (pdev, 0x00, NULL, 0);
+
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_CtlReceiveStatus
+* receive zero lzngth packet on the ctl pipe
+* @param pdev: device instance
+* @retval status
+*/
+USBD_StatusTypeDef USBD_CtlReceiveStatus (USBD_HandleTypeDef *pdev)
+{
+ /* Set EP0 State */
+ pdev->ep0_state = USBD_EP0_STATUS_OUT;
+
+ /* Start the transfer */
+ USBD_LL_PrepareReceive ( pdev,
+ 0,
+ NULL,
+ 0);
+
+ return USBD_OK;
+}
+
+
+/**
+* @brief USBD_GetRxCount
+* returns the received data length
+* @param pdev: device instance
+* @param ep_addr: endpoint address
+* @retval Rx Data blength
+*/
+uint16_t USBD_GetRxCount (USBD_HandleTypeDef *pdev , uint8_t ep_addr)
+{
+ return USBD_LL_GetRxDataSize(pdev, ep_addr);
+}
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|