summaryrefslogtreecommitdiff
path: root/Blink/Drivers/STM32F0xx_HAL_Driver/Inc
diff options
context:
space:
mode:
Diffstat (limited to 'Blink/Drivers/STM32F0xx_HAL_Driver/Inc')
-rw-r--r--Blink/Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h3649
-rw-r--r--Blink/Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32f0xx_hal_can_legacy.h794
-rw-r--r--Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32_assert_template.h57
-rw-r--r--Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h585
-rw-r--r--Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_adc.h1019
-rw-r--r--Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_adc_ex.h299
-rw-r--r--Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_can.h842
-rw-r--r--Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cec.h794
-rw-r--r--Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_comp.h700
-rw-r--r--Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_conf_template.h321
-rw-r--r--Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h133
-rw-r--r--Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_crc.h357
-rw-r--r--Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_crc_ex.h153
-rw-r--r--Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dac.h429
-rw-r--r--Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dac_ex.h292
-rw-r--r--Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h166
-rw-r--r--Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h563
-rw-r--r--Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h811
-rw-r--r--Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h375
-rw-r--r--Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h353
-rw-r--r--Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h448
-rw-r--r--Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h296
-rw-r--r--Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h800
-rw-r--r--Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h782
-rw-r--r--Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h172
-rw-r--r--Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2s.h546
-rw-r--r--Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_irda.h844
-rw-r--r--Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_irda_ex.h399
-rw-r--r--Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_iwdg.h242
-rw-r--r--Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pcd.h945
-rw-r--r--Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pcd_ex.h93
-rw-r--r--Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h189
-rw-r--r--Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h459
-rw-r--r--Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h1686
-rw-r--r--Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h2085
-rw-r--r--Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rtc.h847
-rw-r--r--Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rtc_ex.h1048
-rw-r--r--Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_smartcard.h1021
-rw-r--r--Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_smartcard_ex.h568
-rw-r--r--Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_smbus.h743
-rw-r--r--Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_spi.h854
-rw-r--r--Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_spi_ex.h75
-rw-r--r--Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_tim.h2040
-rw-r--r--Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_tim_ex.h267
-rw-r--r--Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_tsc.h780
-rw-r--r--Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart.h1531
-rw-r--r--Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart_ex.h587
-rw-r--r--Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_usart.h794
-rw-r--r--Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_usart_ex.h520
-rw-r--r--Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_wwdg.h300
-rw-r--r--Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_adc.h3408
-rw-r--r--Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_bus.h845
-rw-r--r--Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_comp.h831
-rw-r--r--Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_cortex.h320
-rw-r--r--Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_crc.h474
-rw-r--r--Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_crs.h783
-rw-r--r--Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_dac.h1422
-rw-r--r--Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_dma.h2208
-rw-r--r--Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_exti.h1016
-rw-r--r--Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_gpio.h939
-rw-r--r--Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_i2c.h2230
-rw-r--r--Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_iwdg.h342
-rw-r--r--Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_pwr.h552
-rw-r--r--Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_rcc.h2261
-rw-r--r--Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_rtc.h3169
-rw-r--r--Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_spi.h2286
-rw-r--r--Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_system.h1852
-rw-r--r--Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_tim.h3942
-rw-r--r--Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_usart.h3810
-rw-r--r--Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_usb.h237
-rw-r--r--Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_utils.h271
-rw-r--r--Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_wwdg.h319
72 files changed, 68170 insertions, 0 deletions
diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h
new file mode 100644
index 0000000..2c80bc5
--- /dev/null
+++ b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h
@@ -0,0 +1,3649 @@
+/**
+ ******************************************************************************
+ * @file stm32_hal_legacy.h
+ * @author MCD Application Team
+ * @brief This file contains aliases definition for the STM32Cube HAL constants
+ * macros and functions maintained for legacy purpose.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32_HAL_LEGACY
+#define STM32_HAL_LEGACY
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup HAL_AES_Aliased_Defines HAL CRYP Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define AES_FLAG_RDERR CRYP_FLAG_RDERR
+#define AES_FLAG_WRERR CRYP_FLAG_WRERR
+#define AES_CLEARFLAG_CCF CRYP_CLEARFLAG_CCF
+#define AES_CLEARFLAG_RDERR CRYP_CLEARFLAG_RDERR
+#define AES_CLEARFLAG_WRERR CRYP_CLEARFLAG_WRERR
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_ADC_Aliased_Defines HAL ADC Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define ADC_RESOLUTION12b ADC_RESOLUTION_12B
+#define ADC_RESOLUTION10b ADC_RESOLUTION_10B
+#define ADC_RESOLUTION8b ADC_RESOLUTION_8B
+#define ADC_RESOLUTION6b ADC_RESOLUTION_6B
+#define OVR_DATA_OVERWRITTEN ADC_OVR_DATA_OVERWRITTEN
+#define OVR_DATA_PRESERVED ADC_OVR_DATA_PRESERVED
+#define EOC_SINGLE_CONV ADC_EOC_SINGLE_CONV
+#define EOC_SEQ_CONV ADC_EOC_SEQ_CONV
+#define EOC_SINGLE_SEQ_CONV ADC_EOC_SINGLE_SEQ_CONV
+#define REGULAR_GROUP ADC_REGULAR_GROUP
+#define INJECTED_GROUP ADC_INJECTED_GROUP
+#define REGULAR_INJECTED_GROUP ADC_REGULAR_INJECTED_GROUP
+#define AWD_EVENT ADC_AWD_EVENT
+#define AWD1_EVENT ADC_AWD1_EVENT
+#define AWD2_EVENT ADC_AWD2_EVENT
+#define AWD3_EVENT ADC_AWD3_EVENT
+#define OVR_EVENT ADC_OVR_EVENT
+#define JQOVF_EVENT ADC_JQOVF_EVENT
+#define ALL_CHANNELS ADC_ALL_CHANNELS
+#define REGULAR_CHANNELS ADC_REGULAR_CHANNELS
+#define INJECTED_CHANNELS ADC_INJECTED_CHANNELS
+#define SYSCFG_FLAG_SENSOR_ADC ADC_FLAG_SENSOR
+#define SYSCFG_FLAG_VREF_ADC ADC_FLAG_VREFINT
+#define ADC_CLOCKPRESCALER_PCLK_DIV1 ADC_CLOCK_SYNC_PCLK_DIV1
+#define ADC_CLOCKPRESCALER_PCLK_DIV2 ADC_CLOCK_SYNC_PCLK_DIV2
+#define ADC_CLOCKPRESCALER_PCLK_DIV4 ADC_CLOCK_SYNC_PCLK_DIV4
+#define ADC_CLOCKPRESCALER_PCLK_DIV6 ADC_CLOCK_SYNC_PCLK_DIV6
+#define ADC_CLOCKPRESCALER_PCLK_DIV8 ADC_CLOCK_SYNC_PCLK_DIV8
+#define ADC_EXTERNALTRIG0_T6_TRGO ADC_EXTERNALTRIGCONV_T6_TRGO
+#define ADC_EXTERNALTRIG1_T21_CC2 ADC_EXTERNALTRIGCONV_T21_CC2
+#define ADC_EXTERNALTRIG2_T2_TRGO ADC_EXTERNALTRIGCONV_T2_TRGO
+#define ADC_EXTERNALTRIG3_T2_CC4 ADC_EXTERNALTRIGCONV_T2_CC4
+#define ADC_EXTERNALTRIG4_T22_TRGO ADC_EXTERNALTRIGCONV_T22_TRGO
+#define ADC_EXTERNALTRIG7_EXT_IT11 ADC_EXTERNALTRIGCONV_EXT_IT11
+#define ADC_CLOCK_ASYNC ADC_CLOCK_ASYNC_DIV1
+#define ADC_EXTERNALTRIG_EDGE_NONE ADC_EXTERNALTRIGCONVEDGE_NONE
+#define ADC_EXTERNALTRIG_EDGE_RISING ADC_EXTERNALTRIGCONVEDGE_RISING
+#define ADC_EXTERNALTRIG_EDGE_FALLING ADC_EXTERNALTRIGCONVEDGE_FALLING
+#define ADC_EXTERNALTRIG_EDGE_RISINGFALLING ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING
+#define ADC_SAMPLETIME_2CYCLE_5 ADC_SAMPLETIME_2CYCLES_5
+
+#define HAL_ADC_STATE_BUSY_REG HAL_ADC_STATE_REG_BUSY
+#define HAL_ADC_STATE_BUSY_INJ HAL_ADC_STATE_INJ_BUSY
+#define HAL_ADC_STATE_EOC_REG HAL_ADC_STATE_REG_EOC
+#define HAL_ADC_STATE_EOC_INJ HAL_ADC_STATE_INJ_EOC
+#define HAL_ADC_STATE_ERROR HAL_ADC_STATE_ERROR_INTERNAL
+#define HAL_ADC_STATE_BUSY HAL_ADC_STATE_BUSY_INTERNAL
+#define HAL_ADC_STATE_AWD HAL_ADC_STATE_AWD1
+
+#if defined(STM32H7)
+#define ADC_CHANNEL_VBAT_DIV4 ADC_CHANNEL_VBAT
+#endif /* STM32H7 */
+/**
+ * @}
+ */
+
+/** @defgroup HAL_CEC_Aliased_Defines HAL CEC Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define __HAL_CEC_GET_IT __HAL_CEC_GET_FLAG
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_COMP_Aliased_Defines HAL COMP Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define COMP_WINDOWMODE_DISABLED COMP_WINDOWMODE_DISABLE
+#define COMP_WINDOWMODE_ENABLED COMP_WINDOWMODE_ENABLE
+#define COMP_EXTI_LINE_COMP1_EVENT COMP_EXTI_LINE_COMP1
+#define COMP_EXTI_LINE_COMP2_EVENT COMP_EXTI_LINE_COMP2
+#define COMP_EXTI_LINE_COMP3_EVENT COMP_EXTI_LINE_COMP3
+#define COMP_EXTI_LINE_COMP4_EVENT COMP_EXTI_LINE_COMP4
+#define COMP_EXTI_LINE_COMP5_EVENT COMP_EXTI_LINE_COMP5
+#define COMP_EXTI_LINE_COMP6_EVENT COMP_EXTI_LINE_COMP6
+#define COMP_EXTI_LINE_COMP7_EVENT COMP_EXTI_LINE_COMP7
+#if defined(STM32L0)
+#define COMP_LPTIMCONNECTION_ENABLED ((uint32_t)0x00000003U) /*!< COMPX output generic naming: connected to LPTIM input 1 for COMP1, LPTIM input 2 for COMP2 */
+#endif
+#define COMP_OUTPUT_COMP6TIM2OCREFCLR COMP_OUTPUT_COMP6_TIM2OCREFCLR
+#if defined(STM32F373xC) || defined(STM32F378xx)
+#define COMP_OUTPUT_TIM3IC1 COMP_OUTPUT_COMP1_TIM3IC1
+#define COMP_OUTPUT_TIM3OCREFCLR COMP_OUTPUT_COMP1_TIM3OCREFCLR
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32L0) || defined(STM32L4)
+#define COMP_WINDOWMODE_ENABLE COMP_WINDOWMODE_COMP1_INPUT_PLUS_COMMON
+
+#define COMP_NONINVERTINGINPUT_IO1 COMP_INPUT_PLUS_IO1
+#define COMP_NONINVERTINGINPUT_IO2 COMP_INPUT_PLUS_IO2
+#define COMP_NONINVERTINGINPUT_IO3 COMP_INPUT_PLUS_IO3
+#define COMP_NONINVERTINGINPUT_IO4 COMP_INPUT_PLUS_IO4
+#define COMP_NONINVERTINGINPUT_IO5 COMP_INPUT_PLUS_IO5
+#define COMP_NONINVERTINGINPUT_IO6 COMP_INPUT_PLUS_IO6
+
+#define COMP_INVERTINGINPUT_1_4VREFINT COMP_INPUT_MINUS_1_4VREFINT
+#define COMP_INVERTINGINPUT_1_2VREFINT COMP_INPUT_MINUS_1_2VREFINT
+#define COMP_INVERTINGINPUT_3_4VREFINT COMP_INPUT_MINUS_3_4VREFINT
+#define COMP_INVERTINGINPUT_VREFINT COMP_INPUT_MINUS_VREFINT
+#define COMP_INVERTINGINPUT_DAC1_CH1 COMP_INPUT_MINUS_DAC1_CH1
+#define COMP_INVERTINGINPUT_DAC1_CH2 COMP_INPUT_MINUS_DAC1_CH2
+#define COMP_INVERTINGINPUT_DAC1 COMP_INPUT_MINUS_DAC1_CH1
+#define COMP_INVERTINGINPUT_DAC2 COMP_INPUT_MINUS_DAC1_CH2
+#define COMP_INVERTINGINPUT_IO1 COMP_INPUT_MINUS_IO1
+#if defined(STM32L0)
+/* Issue fixed on STM32L0 COMP driver: only 2 dedicated IO (IO1 and IO2), */
+/* IO2 was wrongly assigned to IO shared with DAC and IO3 was corresponding */
+/* to the second dedicated IO (only for COMP2). */
+#define COMP_INVERTINGINPUT_IO2 COMP_INPUT_MINUS_DAC1_CH2
+#define COMP_INVERTINGINPUT_IO3 COMP_INPUT_MINUS_IO2
+#else
+#define COMP_INVERTINGINPUT_IO2 COMP_INPUT_MINUS_IO2
+#define COMP_INVERTINGINPUT_IO3 COMP_INPUT_MINUS_IO3
+#endif
+#define COMP_INVERTINGINPUT_IO4 COMP_INPUT_MINUS_IO4
+#define COMP_INVERTINGINPUT_IO5 COMP_INPUT_MINUS_IO5
+
+#define COMP_OUTPUTLEVEL_LOW COMP_OUTPUT_LEVEL_LOW
+#define COMP_OUTPUTLEVEL_HIGH COMP_OUTPUT_LEVEL_HIGH
+
+/* Note: Literal "COMP_FLAG_LOCK" kept for legacy purpose. */
+/* To check COMP lock state, use macro "__HAL_COMP_IS_LOCKED()". */
+#if defined(COMP_CSR_LOCK)
+#define COMP_FLAG_LOCK COMP_CSR_LOCK
+#elif defined(COMP_CSR_COMP1LOCK)
+#define COMP_FLAG_LOCK COMP_CSR_COMP1LOCK
+#elif defined(COMP_CSR_COMPxLOCK)
+#define COMP_FLAG_LOCK COMP_CSR_COMPxLOCK
+#endif
+
+#if defined(STM32L4)
+#define COMP_BLANKINGSRCE_TIM1OC5 COMP_BLANKINGSRC_TIM1_OC5_COMP1
+#define COMP_BLANKINGSRCE_TIM2OC3 COMP_BLANKINGSRC_TIM2_OC3_COMP1
+#define COMP_BLANKINGSRCE_TIM3OC3 COMP_BLANKINGSRC_TIM3_OC3_COMP1
+#define COMP_BLANKINGSRCE_TIM3OC4 COMP_BLANKINGSRC_TIM3_OC4_COMP2
+#define COMP_BLANKINGSRCE_TIM8OC5 COMP_BLANKINGSRC_TIM8_OC5_COMP2
+#define COMP_BLANKINGSRCE_TIM15OC1 COMP_BLANKINGSRC_TIM15_OC1_COMP2
+#define COMP_BLANKINGSRCE_NONE COMP_BLANKINGSRC_NONE
+#endif
+
+#if defined(STM32L0)
+#define COMP_MODE_HIGHSPEED COMP_POWERMODE_MEDIUMSPEED
+#define COMP_MODE_LOWSPEED COMP_POWERMODE_ULTRALOWPOWER
+#else
+#define COMP_MODE_HIGHSPEED COMP_POWERMODE_HIGHSPEED
+#define COMP_MODE_MEDIUMSPEED COMP_POWERMODE_MEDIUMSPEED
+#define COMP_MODE_LOWPOWER COMP_POWERMODE_LOWPOWER
+#define COMP_MODE_ULTRALOWPOWER COMP_POWERMODE_ULTRALOWPOWER
+#endif
+
+#endif
+/**
+ * @}
+ */
+
+/** @defgroup HAL_CORTEX_Aliased_Defines HAL CORTEX Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define __HAL_CORTEX_SYSTICKCLK_CONFIG HAL_SYSTICK_CLKSourceConfig
+/**
+ * @}
+ */
+
+/** @defgroup HAL_CRC_Aliased_Defines HAL CRC Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define CRC_OUTPUTDATA_INVERSION_DISABLED CRC_OUTPUTDATA_INVERSION_DISABLE
+#define CRC_OUTPUTDATA_INVERSION_ENABLED CRC_OUTPUTDATA_INVERSION_ENABLE
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_DAC_Aliased_Defines HAL DAC Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define DAC1_CHANNEL_1 DAC_CHANNEL_1
+#define DAC1_CHANNEL_2 DAC_CHANNEL_2
+#define DAC2_CHANNEL_1 DAC_CHANNEL_1
+#define DAC_WAVE_NONE 0x00000000U
+#define DAC_WAVE_NOISE DAC_CR_WAVE1_0
+#define DAC_WAVE_TRIANGLE DAC_CR_WAVE1_1
+#define DAC_WAVEGENERATION_NONE DAC_WAVE_NONE
+#define DAC_WAVEGENERATION_NOISE DAC_WAVE_NOISE
+#define DAC_WAVEGENERATION_TRIANGLE DAC_WAVE_TRIANGLE
+
+#if defined(STM32G4)
+#define DAC_CHIPCONNECT_DISABLE (DAC_CHIPCONNECT_EXTERNAL | DAC_CHIPCONNECT_BOTH)
+#define DAC_CHIPCONNECT_ENABLE (DAC_CHIPCONNECT_INTERNAL | DAC_CHIPCONNECT_BOTH)
+#endif
+
+#if defined(STM32L1) || defined(STM32L4) || defined(STM32G0)
+#define HAL_DAC_MSP_INIT_CB_ID HAL_DAC_MSPINIT_CB_ID
+#define HAL_DAC_MSP_DEINIT_CB_ID HAL_DAC_MSPDEINIT_CB_ID
+#endif
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_DMA_Aliased_Defines HAL DMA Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define HAL_REMAPDMA_ADC_DMA_CH2 DMA_REMAP_ADC_DMA_CH2
+#define HAL_REMAPDMA_USART1_TX_DMA_CH4 DMA_REMAP_USART1_TX_DMA_CH4
+#define HAL_REMAPDMA_USART1_RX_DMA_CH5 DMA_REMAP_USART1_RX_DMA_CH5
+#define HAL_REMAPDMA_TIM16_DMA_CH4 DMA_REMAP_TIM16_DMA_CH4
+#define HAL_REMAPDMA_TIM17_DMA_CH2 DMA_REMAP_TIM17_DMA_CH2
+#define HAL_REMAPDMA_USART3_DMA_CH32 DMA_REMAP_USART3_DMA_CH32
+#define HAL_REMAPDMA_TIM16_DMA_CH6 DMA_REMAP_TIM16_DMA_CH6
+#define HAL_REMAPDMA_TIM17_DMA_CH7 DMA_REMAP_TIM17_DMA_CH7
+#define HAL_REMAPDMA_SPI2_DMA_CH67 DMA_REMAP_SPI2_DMA_CH67
+#define HAL_REMAPDMA_USART2_DMA_CH67 DMA_REMAP_USART2_DMA_CH67
+#define HAL_REMAPDMA_I2C1_DMA_CH76 DMA_REMAP_I2C1_DMA_CH76
+#define HAL_REMAPDMA_TIM1_DMA_CH6 DMA_REMAP_TIM1_DMA_CH6
+#define HAL_REMAPDMA_TIM2_DMA_CH7 DMA_REMAP_TIM2_DMA_CH7
+#define HAL_REMAPDMA_TIM3_DMA_CH6 DMA_REMAP_TIM3_DMA_CH6
+
+#define IS_HAL_REMAPDMA IS_DMA_REMAP
+#define __HAL_REMAPDMA_CHANNEL_ENABLE __HAL_DMA_REMAP_CHANNEL_ENABLE
+#define __HAL_REMAPDMA_CHANNEL_DISABLE __HAL_DMA_REMAP_CHANNEL_DISABLE
+
+#if defined(STM32L4)
+
+#define HAL_DMAMUX1_REQUEST_GEN_EXTI0 HAL_DMAMUX1_REQ_GEN_EXTI0
+#define HAL_DMAMUX1_REQUEST_GEN_EXTI1 HAL_DMAMUX1_REQ_GEN_EXTI1
+#define HAL_DMAMUX1_REQUEST_GEN_EXTI2 HAL_DMAMUX1_REQ_GEN_EXTI2
+#define HAL_DMAMUX1_REQUEST_GEN_EXTI3 HAL_DMAMUX1_REQ_GEN_EXTI3
+#define HAL_DMAMUX1_REQUEST_GEN_EXTI4 HAL_DMAMUX1_REQ_GEN_EXTI4
+#define HAL_DMAMUX1_REQUEST_GEN_EXTI5 HAL_DMAMUX1_REQ_GEN_EXTI5
+#define HAL_DMAMUX1_REQUEST_GEN_EXTI6 HAL_DMAMUX1_REQ_GEN_EXTI6
+#define HAL_DMAMUX1_REQUEST_GEN_EXTI7 HAL_DMAMUX1_REQ_GEN_EXTI7
+#define HAL_DMAMUX1_REQUEST_GEN_EXTI8 HAL_DMAMUX1_REQ_GEN_EXTI8
+#define HAL_DMAMUX1_REQUEST_GEN_EXTI9 HAL_DMAMUX1_REQ_GEN_EXTI9
+#define HAL_DMAMUX1_REQUEST_GEN_EXTI10 HAL_DMAMUX1_REQ_GEN_EXTI10
+#define HAL_DMAMUX1_REQUEST_GEN_EXTI11 HAL_DMAMUX1_REQ_GEN_EXTI11
+#define HAL_DMAMUX1_REQUEST_GEN_EXTI12 HAL_DMAMUX1_REQ_GEN_EXTI12
+#define HAL_DMAMUX1_REQUEST_GEN_EXTI13 HAL_DMAMUX1_REQ_GEN_EXTI13
+#define HAL_DMAMUX1_REQUEST_GEN_EXTI14 HAL_DMAMUX1_REQ_GEN_EXTI14
+#define HAL_DMAMUX1_REQUEST_GEN_EXTI15 HAL_DMAMUX1_REQ_GEN_EXTI15
+#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH0_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH0_EVT
+#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH1_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH1_EVT
+#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH2_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH2_EVT
+#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH3_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH3_EVT
+#define HAL_DMAMUX1_REQUEST_GEN_LPTIM1_OUT HAL_DMAMUX1_REQ_GEN_LPTIM1_OUT
+#define HAL_DMAMUX1_REQUEST_GEN_LPTIM2_OUT HAL_DMAMUX1_REQ_GEN_LPTIM2_OUT
+#define HAL_DMAMUX1_REQUEST_GEN_DSI_TE HAL_DMAMUX1_REQ_GEN_DSI_TE
+#define HAL_DMAMUX1_REQUEST_GEN_DSI_EOT HAL_DMAMUX1_REQ_GEN_DSI_EOT
+#define HAL_DMAMUX1_REQUEST_GEN_DMA2D_EOT HAL_DMAMUX1_REQ_GEN_DMA2D_EOT
+#define HAL_DMAMUX1_REQUEST_GEN_LTDC_IT HAL_DMAMUX1_REQ_GEN_LTDC_IT
+
+#define HAL_DMAMUX_REQUEST_GEN_NO_EVENT HAL_DMAMUX_REQ_GEN_NO_EVENT
+#define HAL_DMAMUX_REQUEST_GEN_RISING HAL_DMAMUX_REQ_GEN_RISING
+#define HAL_DMAMUX_REQUEST_GEN_FALLING HAL_DMAMUX_REQ_GEN_FALLING
+#define HAL_DMAMUX_REQUEST_GEN_RISING_FALLING HAL_DMAMUX_REQ_GEN_RISING_FALLING
+
+#endif /* STM32L4 */
+
+#if defined(STM32H7)
+
+#define DMA_REQUEST_DAC1 DMA_REQUEST_DAC1_CH1
+#define DMA_REQUEST_DAC2 DMA_REQUEST_DAC1_CH2
+
+#define BDMA_REQUEST_LP_UART1_RX BDMA_REQUEST_LPUART1_RX
+#define BDMA_REQUEST_LP_UART1_TX BDMA_REQUEST_LPUART1_TX
+
+#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH0_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH0_EVT
+#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH1_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH1_EVT
+#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH2_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH2_EVT
+#define HAL_DMAMUX1_REQUEST_GEN_LPTIM1_OUT HAL_DMAMUX1_REQ_GEN_LPTIM1_OUT
+#define HAL_DMAMUX1_REQUEST_GEN_LPTIM2_OUT HAL_DMAMUX1_REQ_GEN_LPTIM2_OUT
+#define HAL_DMAMUX1_REQUEST_GEN_LPTIM3_OUT HAL_DMAMUX1_REQ_GEN_LPTIM3_OUT
+#define HAL_DMAMUX1_REQUEST_GEN_EXTI0 HAL_DMAMUX1_REQ_GEN_EXTI0
+#define HAL_DMAMUX1_REQUEST_GEN_TIM12_TRGO HAL_DMAMUX1_REQ_GEN_TIM12_TRGO
+
+#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH0_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH0_EVT
+#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH1_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH1_EVT
+#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH2_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH2_EVT
+#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH3_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH3_EVT
+#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH4_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH4_EVT
+#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH5_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH5_EVT
+#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH6_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH6_EVT
+#define HAL_DMAMUX2_REQUEST_GEN_LPUART1_RX_WKUP HAL_DMAMUX2_REQ_GEN_LPUART1_RX_WKUP
+#define HAL_DMAMUX2_REQUEST_GEN_LPUART1_TX_WKUP HAL_DMAMUX2_REQ_GEN_LPUART1_TX_WKUP
+#define HAL_DMAMUX2_REQUEST_GEN_LPTIM2_WKUP HAL_DMAMUX2_REQ_GEN_LPTIM2_WKUP
+#define HAL_DMAMUX2_REQUEST_GEN_LPTIM2_OUT HAL_DMAMUX2_REQ_GEN_LPTIM2_OUT
+#define HAL_DMAMUX2_REQUEST_GEN_LPTIM3_WKUP HAL_DMAMUX2_REQ_GEN_LPTIM3_WKUP
+#define HAL_DMAMUX2_REQUEST_GEN_LPTIM3_OUT HAL_DMAMUX2_REQ_GEN_LPTIM3_OUT
+#define HAL_DMAMUX2_REQUEST_GEN_LPTIM4_WKUP HAL_DMAMUX2_REQ_GEN_LPTIM4_WKUP
+#define HAL_DMAMUX2_REQUEST_GEN_LPTIM5_WKUP HAL_DMAMUX2_REQ_GEN_LPTIM5_WKUP
+#define HAL_DMAMUX2_REQUEST_GEN_I2C4_WKUP HAL_DMAMUX2_REQ_GEN_I2C4_WKUP
+#define HAL_DMAMUX2_REQUEST_GEN_SPI6_WKUP HAL_DMAMUX2_REQ_GEN_SPI6_WKUP
+#define HAL_DMAMUX2_REQUEST_GEN_COMP1_OUT HAL_DMAMUX2_REQ_GEN_COMP1_OUT
+#define HAL_DMAMUX2_REQUEST_GEN_COMP2_OUT HAL_DMAMUX2_REQ_GEN_COMP2_OUT
+#define HAL_DMAMUX2_REQUEST_GEN_RTC_WKUP HAL_DMAMUX2_REQ_GEN_RTC_WKUP
+#define HAL_DMAMUX2_REQUEST_GEN_EXTI0 HAL_DMAMUX2_REQ_GEN_EXTI0
+#define HAL_DMAMUX2_REQUEST_GEN_EXTI2 HAL_DMAMUX2_REQ_GEN_EXTI2
+#define HAL_DMAMUX2_REQUEST_GEN_I2C4_IT_EVT HAL_DMAMUX2_REQ_GEN_I2C4_IT_EVT
+#define HAL_DMAMUX2_REQUEST_GEN_SPI6_IT HAL_DMAMUX2_REQ_GEN_SPI6_IT
+#define HAL_DMAMUX2_REQUEST_GEN_LPUART1_TX_IT HAL_DMAMUX2_REQ_GEN_LPUART1_TX_IT
+#define HAL_DMAMUX2_REQUEST_GEN_LPUART1_RX_IT HAL_DMAMUX2_REQ_GEN_LPUART1_RX_IT
+#define HAL_DMAMUX2_REQUEST_GEN_ADC3_IT HAL_DMAMUX2_REQ_GEN_ADC3_IT
+#define HAL_DMAMUX2_REQUEST_GEN_ADC3_AWD1_OUT HAL_DMAMUX2_REQ_GEN_ADC3_AWD1_OUT
+#define HAL_DMAMUX2_REQUEST_GEN_BDMA_CH0_IT HAL_DMAMUX2_REQ_GEN_BDMA_CH0_IT
+#define HAL_DMAMUX2_REQUEST_GEN_BDMA_CH1_IT HAL_DMAMUX2_REQ_GEN_BDMA_CH1_IT
+
+#define HAL_DMAMUX_REQUEST_GEN_NO_EVENT HAL_DMAMUX_REQ_GEN_NO_EVENT
+#define HAL_DMAMUX_REQUEST_GEN_RISING HAL_DMAMUX_REQ_GEN_RISING
+#define HAL_DMAMUX_REQUEST_GEN_FALLING HAL_DMAMUX_REQ_GEN_FALLING
+#define HAL_DMAMUX_REQUEST_GEN_RISING_FALLING HAL_DMAMUX_REQ_GEN_RISING_FALLING
+
+#define DFSDM_FILTER_EXT_TRIG_LPTIM1 DFSDM_FILTER_EXT_TRIG_LPTIM1_OUT
+#define DFSDM_FILTER_EXT_TRIG_LPTIM2 DFSDM_FILTER_EXT_TRIG_LPTIM2_OUT
+#define DFSDM_FILTER_EXT_TRIG_LPTIM3 DFSDM_FILTER_EXT_TRIG_LPTIM3_OUT
+
+#endif /* STM32H7 */
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_FLASH_Aliased_Defines HAL FLASH Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define TYPEPROGRAM_BYTE FLASH_TYPEPROGRAM_BYTE
+#define TYPEPROGRAM_HALFWORD FLASH_TYPEPROGRAM_HALFWORD
+#define TYPEPROGRAM_WORD FLASH_TYPEPROGRAM_WORD
+#define TYPEPROGRAM_DOUBLEWORD FLASH_TYPEPROGRAM_DOUBLEWORD
+#define TYPEERASE_SECTORS FLASH_TYPEERASE_SECTORS
+#define TYPEERASE_PAGES FLASH_TYPEERASE_PAGES
+#define TYPEERASE_PAGEERASE FLASH_TYPEERASE_PAGES
+#define TYPEERASE_MASSERASE FLASH_TYPEERASE_MASSERASE
+#define WRPSTATE_DISABLE OB_WRPSTATE_DISABLE
+#define WRPSTATE_ENABLE OB_WRPSTATE_ENABLE
+#define HAL_FLASH_TIMEOUT_VALUE FLASH_TIMEOUT_VALUE
+#define OBEX_PCROP OPTIONBYTE_PCROP
+#define OBEX_BOOTCONFIG OPTIONBYTE_BOOTCONFIG
+#define PCROPSTATE_DISABLE OB_PCROP_STATE_DISABLE
+#define PCROPSTATE_ENABLE OB_PCROP_STATE_ENABLE
+#define TYPEERASEDATA_BYTE FLASH_TYPEERASEDATA_BYTE
+#define TYPEERASEDATA_HALFWORD FLASH_TYPEERASEDATA_HALFWORD
+#define TYPEERASEDATA_WORD FLASH_TYPEERASEDATA_WORD
+#define TYPEPROGRAMDATA_BYTE FLASH_TYPEPROGRAMDATA_BYTE
+#define TYPEPROGRAMDATA_HALFWORD FLASH_TYPEPROGRAMDATA_HALFWORD
+#define TYPEPROGRAMDATA_WORD FLASH_TYPEPROGRAMDATA_WORD
+#define TYPEPROGRAMDATA_FASTBYTE FLASH_TYPEPROGRAMDATA_FASTBYTE
+#define TYPEPROGRAMDATA_FASTHALFWORD FLASH_TYPEPROGRAMDATA_FASTHALFWORD
+#define TYPEPROGRAMDATA_FASTWORD FLASH_TYPEPROGRAMDATA_FASTWORD
+#define PAGESIZE FLASH_PAGE_SIZE
+#define TYPEPROGRAM_FASTBYTE FLASH_TYPEPROGRAM_BYTE
+#define TYPEPROGRAM_FASTHALFWORD FLASH_TYPEPROGRAM_HALFWORD
+#define TYPEPROGRAM_FASTWORD FLASH_TYPEPROGRAM_WORD
+#define VOLTAGE_RANGE_1 FLASH_VOLTAGE_RANGE_1
+#define VOLTAGE_RANGE_2 FLASH_VOLTAGE_RANGE_2
+#define VOLTAGE_RANGE_3 FLASH_VOLTAGE_RANGE_3
+#define VOLTAGE_RANGE_4 FLASH_VOLTAGE_RANGE_4
+#define TYPEPROGRAM_FAST FLASH_TYPEPROGRAM_FAST
+#define TYPEPROGRAM_FAST_AND_LAST FLASH_TYPEPROGRAM_FAST_AND_LAST
+#define WRPAREA_BANK1_AREAA OB_WRPAREA_BANK1_AREAA
+#define WRPAREA_BANK1_AREAB OB_WRPAREA_BANK1_AREAB
+#define WRPAREA_BANK2_AREAA OB_WRPAREA_BANK2_AREAA
+#define WRPAREA_BANK2_AREAB OB_WRPAREA_BANK2_AREAB
+#define IWDG_STDBY_FREEZE OB_IWDG_STDBY_FREEZE
+#define IWDG_STDBY_ACTIVE OB_IWDG_STDBY_RUN
+#define IWDG_STOP_FREEZE OB_IWDG_STOP_FREEZE
+#define IWDG_STOP_ACTIVE OB_IWDG_STOP_RUN
+#define FLASH_ERROR_NONE HAL_FLASH_ERROR_NONE
+#define FLASH_ERROR_RD HAL_FLASH_ERROR_RD
+#define FLASH_ERROR_PG HAL_FLASH_ERROR_PROG
+#define FLASH_ERROR_PGP HAL_FLASH_ERROR_PGS
+#define FLASH_ERROR_WRP HAL_FLASH_ERROR_WRP
+#define FLASH_ERROR_OPTV HAL_FLASH_ERROR_OPTV
+#define FLASH_ERROR_OPTVUSR HAL_FLASH_ERROR_OPTVUSR
+#define FLASH_ERROR_PROG HAL_FLASH_ERROR_PROG
+#define FLASH_ERROR_OP HAL_FLASH_ERROR_OPERATION
+#define FLASH_ERROR_PGA HAL_FLASH_ERROR_PGA
+#define FLASH_ERROR_SIZE HAL_FLASH_ERROR_SIZE
+#define FLASH_ERROR_SIZ HAL_FLASH_ERROR_SIZE
+#define FLASH_ERROR_PGS HAL_FLASH_ERROR_PGS
+#define FLASH_ERROR_MIS HAL_FLASH_ERROR_MIS
+#define FLASH_ERROR_FAST HAL_FLASH_ERROR_FAST
+#define FLASH_ERROR_FWWERR HAL_FLASH_ERROR_FWWERR
+#define FLASH_ERROR_NOTZERO HAL_FLASH_ERROR_NOTZERO
+#define FLASH_ERROR_OPERATION HAL_FLASH_ERROR_OPERATION
+#define FLASH_ERROR_ERS HAL_FLASH_ERROR_ERS
+#define OB_WDG_SW OB_IWDG_SW
+#define OB_WDG_HW OB_IWDG_HW
+#define OB_SDADC12_VDD_MONITOR_SET OB_SDACD_VDD_MONITOR_SET
+#define OB_SDADC12_VDD_MONITOR_RESET OB_SDACD_VDD_MONITOR_RESET
+#define OB_RAM_PARITY_CHECK_SET OB_SRAM_PARITY_SET
+#define OB_RAM_PARITY_CHECK_RESET OB_SRAM_PARITY_RESET
+#define IS_OB_SDADC12_VDD_MONITOR IS_OB_SDACD_VDD_MONITOR
+#define OB_RDP_LEVEL0 OB_RDP_LEVEL_0
+#define OB_RDP_LEVEL1 OB_RDP_LEVEL_1
+#define OB_RDP_LEVEL2 OB_RDP_LEVEL_2
+#if defined(STM32G0)
+#define OB_BOOT_LOCK_DISABLE OB_BOOT_ENTRY_FORCED_NONE
+#define OB_BOOT_LOCK_ENABLE OB_BOOT_ENTRY_FORCED_FLASH
+#else
+#define OB_BOOT_ENTRY_FORCED_NONE OB_BOOT_LOCK_DISABLE
+#define OB_BOOT_ENTRY_FORCED_FLASH OB_BOOT_LOCK_ENABLE
+#endif
+#if defined(STM32H7)
+#define FLASH_FLAG_SNECCE_BANK1RR FLASH_FLAG_SNECCERR_BANK1
+#define FLASH_FLAG_DBECCE_BANK1RR FLASH_FLAG_DBECCERR_BANK1
+#define FLASH_FLAG_STRBER_BANK1R FLASH_FLAG_STRBERR_BANK1
+#define FLASH_FLAG_SNECCE_BANK2RR FLASH_FLAG_SNECCERR_BANK2
+#define FLASH_FLAG_DBECCE_BANK2RR FLASH_FLAG_DBECCERR_BANK2
+#define FLASH_FLAG_STRBER_BANK2R FLASH_FLAG_STRBERR_BANK2
+#define FLASH_FLAG_WDW FLASH_FLAG_WBNE
+#define OB_WRP_SECTOR_All OB_WRP_SECTOR_ALL
+#endif /* STM32H7 */
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_JPEG_Aliased_Macros HAL JPEG Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#if defined(STM32H7)
+#define __HAL_RCC_JPEG_CLK_ENABLE __HAL_RCC_JPGDECEN_CLK_ENABLE
+#define __HAL_RCC_JPEG_CLK_DISABLE __HAL_RCC_JPGDECEN_CLK_DISABLE
+#define __HAL_RCC_JPEG_FORCE_RESET __HAL_RCC_JPGDECRST_FORCE_RESET
+#define __HAL_RCC_JPEG_RELEASE_RESET __HAL_RCC_JPGDECRST_RELEASE_RESET
+#define __HAL_RCC_JPEG_CLK_SLEEP_ENABLE __HAL_RCC_JPGDEC_CLK_SLEEP_ENABLE
+#define __HAL_RCC_JPEG_CLK_SLEEP_DISABLE __HAL_RCC_JPGDEC_CLK_SLEEP_DISABLE
+#endif /* STM32H7 */
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_SYSCFG_Aliased_Defines HAL SYSCFG Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PA9 I2C_FASTMODEPLUS_PA9
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PA10 I2C_FASTMODEPLUS_PA10
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB6 I2C_FASTMODEPLUS_PB6
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB7 I2C_FASTMODEPLUS_PB7
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB8 I2C_FASTMODEPLUS_PB8
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB9 I2C_FASTMODEPLUS_PB9
+#define HAL_SYSCFG_FASTMODEPLUS_I2C1 I2C_FASTMODEPLUS_I2C1
+#define HAL_SYSCFG_FASTMODEPLUS_I2C2 I2C_FASTMODEPLUS_I2C2
+#define HAL_SYSCFG_FASTMODEPLUS_I2C3 I2C_FASTMODEPLUS_I2C3
+#if defined(STM32G4)
+
+#define HAL_SYSCFG_EnableIOAnalogSwitchBooster HAL_SYSCFG_EnableIOSwitchBooster
+#define HAL_SYSCFG_DisableIOAnalogSwitchBooster HAL_SYSCFG_DisableIOSwitchBooster
+#define HAL_SYSCFG_EnableIOAnalogSwitchVDD HAL_SYSCFG_EnableIOSwitchVDD
+#define HAL_SYSCFG_DisableIOAnalogSwitchVDD HAL_SYSCFG_DisableIOSwitchVDD
+#endif /* STM32G4 */
+/**
+ * @}
+ */
+
+
+/** @defgroup LL_FMC_Aliased_Defines LL FMC Aliased Defines maintained for compatibility purpose
+ * @{
+ */
+#if defined(STM32L4) || defined(STM32F7) || defined(STM32H7) || defined(STM32G4)
+#define FMC_NAND_PCC_WAIT_FEATURE_DISABLE FMC_NAND_WAIT_FEATURE_DISABLE
+#define FMC_NAND_PCC_WAIT_FEATURE_ENABLE FMC_NAND_WAIT_FEATURE_ENABLE
+#define FMC_NAND_PCC_MEM_BUS_WIDTH_8 FMC_NAND_MEM_BUS_WIDTH_8
+#define FMC_NAND_PCC_MEM_BUS_WIDTH_16 FMC_NAND_MEM_BUS_WIDTH_16
+#elif defined(STM32F1) || defined(STM32F2) || defined(STM32F3) || defined(STM32F4)
+#define FMC_NAND_WAIT_FEATURE_DISABLE FMC_NAND_PCC_WAIT_FEATURE_DISABLE
+#define FMC_NAND_WAIT_FEATURE_ENABLE FMC_NAND_PCC_WAIT_FEATURE_ENABLE
+#define FMC_NAND_MEM_BUS_WIDTH_8 FMC_NAND_PCC_MEM_BUS_WIDTH_8
+#define FMC_NAND_MEM_BUS_WIDTH_16 FMC_NAND_PCC_MEM_BUS_WIDTH_16
+#endif
+/**
+ * @}
+ */
+
+/** @defgroup LL_FSMC_Aliased_Defines LL FSMC Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define FSMC_NORSRAM_TYPEDEF FSMC_NORSRAM_TypeDef
+#define FSMC_NORSRAM_EXTENDED_TYPEDEF FSMC_NORSRAM_EXTENDED_TypeDef
+/**
+ * @}
+ */
+
+/** @defgroup HAL_GPIO_Aliased_Macros HAL GPIO Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define GET_GPIO_SOURCE GPIO_GET_INDEX
+#define GET_GPIO_INDEX GPIO_GET_INDEX
+
+#if defined(STM32F4)
+#define GPIO_AF12_SDMMC GPIO_AF12_SDIO
+#define GPIO_AF12_SDMMC1 GPIO_AF12_SDIO
+#endif
+
+#if defined(STM32F7)
+#define GPIO_AF12_SDIO GPIO_AF12_SDMMC1
+#define GPIO_AF12_SDMMC GPIO_AF12_SDMMC1
+#endif
+
+#if defined(STM32L4)
+#define GPIO_AF12_SDIO GPIO_AF12_SDMMC1
+#define GPIO_AF12_SDMMC GPIO_AF12_SDMMC1
+#endif
+
+#if defined(STM32H7)
+#define GPIO_AF7_SDIO1 GPIO_AF7_SDMMC1
+#define GPIO_AF8_SDIO1 GPIO_AF8_SDMMC1
+#define GPIO_AF12_SDIO1 GPIO_AF12_SDMMC1
+#define GPIO_AF9_SDIO2 GPIO_AF9_SDMMC2
+#define GPIO_AF10_SDIO2 GPIO_AF10_SDMMC2
+#define GPIO_AF11_SDIO2 GPIO_AF11_SDMMC2
+#endif
+
+#define GPIO_AF0_LPTIM GPIO_AF0_LPTIM1
+#define GPIO_AF1_LPTIM GPIO_AF1_LPTIM1
+#define GPIO_AF2_LPTIM GPIO_AF2_LPTIM1
+
+#if defined(STM32L0) || defined(STM32L4) || defined(STM32F4) || defined(STM32F2) || defined(STM32F7) || defined(STM32G4) || defined(STM32H7)
+#define GPIO_SPEED_LOW GPIO_SPEED_FREQ_LOW
+#define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_MEDIUM
+#define GPIO_SPEED_FAST GPIO_SPEED_FREQ_HIGH
+#define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_VERY_HIGH
+#endif /* STM32L0 || STM32L4 || STM32F4 || STM32F2 || STM32F7 || STM32G4 || STM32H7*/
+
+#if defined(STM32L1)
+ #define GPIO_SPEED_VERY_LOW GPIO_SPEED_FREQ_LOW
+ #define GPIO_SPEED_LOW GPIO_SPEED_FREQ_MEDIUM
+ #define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_HIGH
+ #define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_VERY_HIGH
+#endif /* STM32L1 */
+
+#if defined(STM32F0) || defined(STM32F3) || defined(STM32F1)
+ #define GPIO_SPEED_LOW GPIO_SPEED_FREQ_LOW
+ #define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_MEDIUM
+ #define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_HIGH
+#endif /* STM32F0 || STM32F3 || STM32F1 */
+
+#define GPIO_AF6_DFSDM GPIO_AF6_DFSDM1
+/**
+ * @}
+ */
+
+/** @defgroup HAL_HRTIM_Aliased_Macros HAL HRTIM Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define HRTIM_TIMDELAYEDPROTECTION_DISABLED HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DISABLED
+#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT1_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT1_EEV6
+#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT2_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT2_EEV6
+#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDBOTH_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDBOTH_EEV6
+#define HRTIM_TIMDELAYEDPROTECTION_BALANCED_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_BALANCED_EEV6
+#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT1_DEEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT1_DEEV7
+#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT2_DEEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT2_DEEV7
+#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDBOTH_EEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDBOTH_EEV7
+#define HRTIM_TIMDELAYEDPROTECTION_BALANCED_EEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_BALANCED_EEV7
+
+#define __HAL_HRTIM_SetCounter __HAL_HRTIM_SETCOUNTER
+#define __HAL_HRTIM_GetCounter __HAL_HRTIM_GETCOUNTER
+#define __HAL_HRTIM_SetPeriod __HAL_HRTIM_SETPERIOD
+#define __HAL_HRTIM_GetPeriod __HAL_HRTIM_GETPERIOD
+#define __HAL_HRTIM_SetClockPrescaler __HAL_HRTIM_SETCLOCKPRESCALER
+#define __HAL_HRTIM_GetClockPrescaler __HAL_HRTIM_GETCLOCKPRESCALER
+#define __HAL_HRTIM_SetCompare __HAL_HRTIM_SETCOMPARE
+#define __HAL_HRTIM_GetCompare __HAL_HRTIM_GETCOMPARE
+
+#if defined(STM32G4)
+#define HAL_HRTIM_ExternalEventCounterConfig HAL_HRTIM_ExtEventCounterConfig
+#define HAL_HRTIM_ExternalEventCounterEnable HAL_HRTIM_ExtEventCounterEnable
+#define HAL_HRTIM_ExternalEventCounterDisable HAL_HRTIM_ExtEventCounterDisable
+#define HAL_HRTIM_ExternalEventCounterReset HAL_HRTIM_ExtEventCounterReset
+#endif /* STM32G4 */
+
+#if defined(STM32H7)
+#define HRTIM_OUTPUTSET_TIMAEV1_TIMBCMP1 HRTIM_OUTPUTSET_TIMEV_1
+#define HRTIM_OUTPUTSET_TIMAEV2_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_2
+#define HRTIM_OUTPUTSET_TIMAEV3_TIMCCMP2 HRTIM_OUTPUTSET_TIMEV_3
+#define HRTIM_OUTPUTSET_TIMAEV4_TIMCCMP3 HRTIM_OUTPUTSET_TIMEV_4
+#define HRTIM_OUTPUTSET_TIMAEV5_TIMDCMP1 HRTIM_OUTPUTSET_TIMEV_5
+#define HRTIM_OUTPUTSET_TIMAEV6_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_6
+#define HRTIM_OUTPUTSET_TIMAEV7_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_7
+#define HRTIM_OUTPUTSET_TIMAEV8_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_8
+#define HRTIM_OUTPUTSET_TIMAEV9_TIMFCMP4 HRTIM_OUTPUTSET_TIMEV_9
+#define HRTIM_OUTPUTSET_TIMBEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1
+#define HRTIM_OUTPUTSET_TIMBEV2_TIMACMP2 HRTIM_OUTPUTSET_TIMEV_2
+#define HRTIM_OUTPUTSET_TIMBEV3_TIMCCMP3 HRTIM_OUTPUTSET_TIMEV_3
+#define HRTIM_OUTPUTSET_TIMBEV4_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_4
+#define HRTIM_OUTPUTSET_TIMBEV5_TIMDCMP3 HRTIM_OUTPUTSET_TIMEV_5
+#define HRTIM_OUTPUTSET_TIMBEV6_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_6
+#define HRTIM_OUTPUTSET_TIMBEV7_TIMECMP1 HRTIM_OUTPUTSET_TIMEV_7
+#define HRTIM_OUTPUTSET_TIMBEV8_TIMECMP2 HRTIM_OUTPUTSET_TIMEV_8
+#define HRTIM_OUTPUTSET_TIMBEV9_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_9
+#define HRTIM_OUTPUTSET_TIMCEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1
+#define HRTIM_OUTPUTSET_TIMCEV2_TIMACMP2 HRTIM_OUTPUTSET_TIMEV_2
+#define HRTIM_OUTPUTSET_TIMCEV3_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_3
+#define HRTIM_OUTPUTSET_TIMCEV4_TIMBCMP3 HRTIM_OUTPUTSET_TIMEV_4
+#define HRTIM_OUTPUTSET_TIMCEV5_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_5
+#define HRTIM_OUTPUTSET_TIMCEV6_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_6
+#define HRTIM_OUTPUTSET_TIMCEV7_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_7
+#define HRTIM_OUTPUTSET_TIMCEV8_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_8
+#define HRTIM_OUTPUTSET_TIMCEV9_TIMFCMP2 HRTIM_OUTPUTSET_TIMEV_9
+#define HRTIM_OUTPUTSET_TIMDEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1
+#define HRTIM_OUTPUTSET_TIMDEV2_TIMACMP4 HRTIM_OUTPUTSET_TIMEV_2
+#define HRTIM_OUTPUTSET_TIMDEV3_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_3
+#define HRTIM_OUTPUTSET_TIMDEV4_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_4
+#define HRTIM_OUTPUTSET_TIMDEV5_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_5
+#define HRTIM_OUTPUTSET_TIMDEV6_TIMECMP1 HRTIM_OUTPUTSET_TIMEV_6
+#define HRTIM_OUTPUTSET_TIMDEV7_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_7
+#define HRTIM_OUTPUTSET_TIMDEV8_TIMFCMP1 HRTIM_OUTPUTSET_TIMEV_8
+#define HRTIM_OUTPUTSET_TIMDEV9_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_9
+#define HRTIM_OUTPUTSET_TIMEEV1_TIMACMP4 HRTIM_OUTPUTSET_TIMEV_1
+#define HRTIM_OUTPUTSET_TIMEEV2_TIMBCMP3 HRTIM_OUTPUTSET_TIMEV_2
+#define HRTIM_OUTPUTSET_TIMEEV3_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_3
+#define HRTIM_OUTPUTSET_TIMEEV4_TIMCCMP1 HRTIM_OUTPUTSET_TIMEV_4
+#define HRTIM_OUTPUTSET_TIMEEV5_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_5
+#define HRTIM_OUTPUTSET_TIMEEV6_TIMDCMP1 HRTIM_OUTPUTSET_TIMEV_6
+#define HRTIM_OUTPUTSET_TIMEEV7_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_7
+#define HRTIM_OUTPUTSET_TIMEEV8_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_8
+#define HRTIM_OUTPUTSET_TIMEEV9_TIMFCMP4 HRTIM_OUTPUTSET_TIMEV_9
+#define HRTIM_OUTPUTSET_TIMFEV1_TIMACMP3 HRTIM_OUTPUTSET_TIMEV_1
+#define HRTIM_OUTPUTSET_TIMFEV2_TIMBCMP1 HRTIM_OUTPUTSET_TIMEV_2
+#define HRTIM_OUTPUTSET_TIMFEV3_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_3
+#define HRTIM_OUTPUTSET_TIMFEV4_TIMCCMP1 HRTIM_OUTPUTSET_TIMEV_4
+#define HRTIM_OUTPUTSET_TIMFEV5_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_5
+#define HRTIM_OUTPUTSET_TIMFEV6_TIMDCMP3 HRTIM_OUTPUTSET_TIMEV_6
+#define HRTIM_OUTPUTSET_TIMFEV7_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_7
+#define HRTIM_OUTPUTSET_TIMFEV8_TIMECMP2 HRTIM_OUTPUTSET_TIMEV_8
+#define HRTIM_OUTPUTSET_TIMFEV9_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_9
+
+#define HRTIM_OUTPUTRESET_TIMAEV1_TIMBCMP1 HRTIM_OUTPUTSET_TIMEV_1
+#define HRTIM_OUTPUTRESET_TIMAEV2_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_2
+#define HRTIM_OUTPUTRESET_TIMAEV3_TIMCCMP2 HRTIM_OUTPUTSET_TIMEV_3
+#define HRTIM_OUTPUTRESET_TIMAEV4_TIMCCMP3 HRTIM_OUTPUTSET_TIMEV_4
+#define HRTIM_OUTPUTRESET_TIMAEV5_TIMDCMP1 HRTIM_OUTPUTSET_TIMEV_5
+#define HRTIM_OUTPUTRESET_TIMAEV6_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_6
+#define HRTIM_OUTPUTRESET_TIMAEV7_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_7
+#define HRTIM_OUTPUTRESET_TIMAEV8_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_8
+#define HRTIM_OUTPUTRESET_TIMAEV9_TIMFCMP4 HRTIM_OUTPUTSET_TIMEV_9
+#define HRTIM_OUTPUTRESET_TIMBEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1
+#define HRTIM_OUTPUTRESET_TIMBEV2_TIMACMP2 HRTIM_OUTPUTSET_TIMEV_2
+#define HRTIM_OUTPUTRESET_TIMBEV3_TIMCCMP3 HRTIM_OUTPUTSET_TIMEV_3
+#define HRTIM_OUTPUTRESET_TIMBEV4_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_4
+#define HRTIM_OUTPUTRESET_TIMBEV5_TIMDCMP3 HRTIM_OUTPUTSET_TIMEV_5
+#define HRTIM_OUTPUTRESET_TIMBEV6_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_6
+#define HRTIM_OUTPUTRESET_TIMBEV7_TIMECMP1 HRTIM_OUTPUTSET_TIMEV_7
+#define HRTIM_OUTPUTRESET_TIMBEV8_TIMECMP2 HRTIM_OUTPUTSET_TIMEV_8
+#define HRTIM_OUTPUTRESET_TIMBEV9_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_9
+#define HRTIM_OUTPUTRESET_TIMCEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1
+#define HRTIM_OUTPUTRESET_TIMCEV2_TIMACMP2 HRTIM_OUTPUTSET_TIMEV_2
+#define HRTIM_OUTPUTRESET_TIMCEV3_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_3
+#define HRTIM_OUTPUTRESET_TIMCEV4_TIMBCMP3 HRTIM_OUTPUTSET_TIMEV_4
+#define HRTIM_OUTPUTRESET_TIMCEV5_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_5
+#define HRTIM_OUTPUTRESET_TIMCEV6_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_6
+#define HRTIM_OUTPUTRESET_TIMCEV7_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_7
+#define HRTIM_OUTPUTRESET_TIMCEV8_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_8
+#define HRTIM_OUTPUTRESET_TIMCEV9_TIMFCMP2 HRTIM_OUTPUTSET_TIMEV_9
+#define HRTIM_OUTPUTRESET_TIMDEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1
+#define HRTIM_OUTPUTRESET_TIMDEV2_TIMACMP4 HRTIM_OUTPUTSET_TIMEV_2
+#define HRTIM_OUTPUTRESET_TIMDEV3_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_3
+#define HRTIM_OUTPUTRESET_TIMDEV4_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_4
+#define HRTIM_OUTPUTRESET_TIMDEV5_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_5
+#define HRTIM_OUTPUTRESET_TIMDEV6_TIMECMP1 HRTIM_OUTPUTSET_TIMEV_6
+#define HRTIM_OUTPUTRESET_TIMDEV7_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_7
+#define HRTIM_OUTPUTRESET_TIMDEV8_TIMFCMP1 HRTIM_OUTPUTSET_TIMEV_8
+#define HRTIM_OUTPUTRESET_TIMDEV9_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_9
+#define HRTIM_OUTPUTRESET_TIMEEV1_TIMACMP4 HRTIM_OUTPUTSET_TIMEV_1
+#define HRTIM_OUTPUTRESET_TIMEEV2_TIMBCMP3 HRTIM_OUTPUTSET_TIMEV_2
+#define HRTIM_OUTPUTRESET_TIMEEV3_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_3
+#define HRTIM_OUTPUTRESET_TIMEEV4_TIMCCMP1 HRTIM_OUTPUTSET_TIMEV_4
+#define HRTIM_OUTPUTRESET_TIMEEV5_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_5
+#define HRTIM_OUTPUTRESET_TIMEEV6_TIMDCMP1 HRTIM_OUTPUTSET_TIMEV_6
+#define HRTIM_OUTPUTRESET_TIMEEV7_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_7
+#define HRTIM_OUTPUTRESET_TIMEEV8_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_8
+#define HRTIM_OUTPUTRESET_TIMEEV9_TIMFCMP4 HRTIM_OUTPUTSET_TIMEV_9
+#define HRTIM_OUTPUTRESET_TIMFEV1_TIMACMP3 HRTIM_OUTPUTSET_TIMEV_1
+#define HRTIM_OUTPUTRESET_TIMFEV2_TIMBCMP1 HRTIM_OUTPUTSET_TIMEV_2
+#define HRTIM_OUTPUTRESET_TIMFEV3_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_3
+#define HRTIM_OUTPUTRESET_TIMFEV4_TIMCCMP1 HRTIM_OUTPUTSET_TIMEV_4
+#define HRTIM_OUTPUTRESET_TIMFEV5_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_5
+#define HRTIM_OUTPUTRESET_TIMFEV6_TIMDCMP3 HRTIM_OUTPUTSET_TIMEV_6
+#define HRTIM_OUTPUTRESET_TIMFEV7_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_7
+#define HRTIM_OUTPUTRESET_TIMFEV8_TIMECMP2 HRTIM_OUTPUTSET_TIMEV_8
+#define HRTIM_OUTPUTRESET_TIMFEV9_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_9
+#endif /* STM32H7 */
+/**
+ * @}
+ */
+
+/** @defgroup HAL_I2C_Aliased_Defines HAL I2C Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define I2C_DUALADDRESS_DISABLED I2C_DUALADDRESS_DISABLE
+#define I2C_DUALADDRESS_ENABLED I2C_DUALADDRESS_ENABLE
+#define I2C_GENERALCALL_DISABLED I2C_GENERALCALL_DISABLE
+#define I2C_GENERALCALL_ENABLED I2C_GENERALCALL_ENABLE
+#define I2C_NOSTRETCH_DISABLED I2C_NOSTRETCH_DISABLE
+#define I2C_NOSTRETCH_ENABLED I2C_NOSTRETCH_ENABLE
+#define I2C_ANALOGFILTER_ENABLED I2C_ANALOGFILTER_ENABLE
+#define I2C_ANALOGFILTER_DISABLED I2C_ANALOGFILTER_DISABLE
+#if defined(STM32F0) || defined(STM32F1) || defined(STM32F3) || defined(STM32G0) || defined(STM32L4) || defined(STM32L1) || defined(STM32F7)
+#define HAL_I2C_STATE_MEM_BUSY_TX HAL_I2C_STATE_BUSY_TX
+#define HAL_I2C_STATE_MEM_BUSY_RX HAL_I2C_STATE_BUSY_RX
+#define HAL_I2C_STATE_MASTER_BUSY_TX HAL_I2C_STATE_BUSY_TX
+#define HAL_I2C_STATE_MASTER_BUSY_RX HAL_I2C_STATE_BUSY_RX
+#define HAL_I2C_STATE_SLAVE_BUSY_TX HAL_I2C_STATE_BUSY_TX
+#define HAL_I2C_STATE_SLAVE_BUSY_RX HAL_I2C_STATE_BUSY_RX
+#endif
+/**
+ * @}
+ */
+
+/** @defgroup HAL_IRDA_Aliased_Defines HAL IRDA Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define IRDA_ONE_BIT_SAMPLE_DISABLED IRDA_ONE_BIT_SAMPLE_DISABLE
+#define IRDA_ONE_BIT_SAMPLE_ENABLED IRDA_ONE_BIT_SAMPLE_ENABLE
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_IWDG_Aliased_Defines HAL IWDG Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define KR_KEY_RELOAD IWDG_KEY_RELOAD
+#define KR_KEY_ENABLE IWDG_KEY_ENABLE
+#define KR_KEY_EWA IWDG_KEY_WRITE_ACCESS_ENABLE
+#define KR_KEY_DWA IWDG_KEY_WRITE_ACCESS_DISABLE
+/**
+ * @}
+ */
+
+/** @defgroup HAL_LPTIM_Aliased_Defines HAL LPTIM Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define LPTIM_CLOCKSAMPLETIME_DIRECTTRANSISTION LPTIM_CLOCKSAMPLETIME_DIRECTTRANSITION
+#define LPTIM_CLOCKSAMPLETIME_2TRANSISTIONS LPTIM_CLOCKSAMPLETIME_2TRANSITIONS
+#define LPTIM_CLOCKSAMPLETIME_4TRANSISTIONS LPTIM_CLOCKSAMPLETIME_4TRANSITIONS
+#define LPTIM_CLOCKSAMPLETIME_8TRANSISTIONS LPTIM_CLOCKSAMPLETIME_8TRANSITIONS
+
+#define LPTIM_CLOCKPOLARITY_RISINGEDGE LPTIM_CLOCKPOLARITY_RISING
+#define LPTIM_CLOCKPOLARITY_FALLINGEDGE LPTIM_CLOCKPOLARITY_FALLING
+#define LPTIM_CLOCKPOLARITY_BOTHEDGES LPTIM_CLOCKPOLARITY_RISING_FALLING
+
+#define LPTIM_TRIGSAMPLETIME_DIRECTTRANSISTION LPTIM_TRIGSAMPLETIME_DIRECTTRANSITION
+#define LPTIM_TRIGSAMPLETIME_2TRANSISTIONS LPTIM_TRIGSAMPLETIME_2TRANSITIONS
+#define LPTIM_TRIGSAMPLETIME_4TRANSISTIONS LPTIM_TRIGSAMPLETIME_4TRANSITIONS
+#define LPTIM_TRIGSAMPLETIME_8TRANSISTIONS LPTIM_TRIGSAMPLETIME_8TRANSITIONS
+
+/* The following 3 definition have also been present in a temporary version of lptim.h */
+/* They need to be renamed also to the right name, just in case */
+#define LPTIM_TRIGSAMPLETIME_2TRANSITION LPTIM_TRIGSAMPLETIME_2TRANSITIONS
+#define LPTIM_TRIGSAMPLETIME_4TRANSITION LPTIM_TRIGSAMPLETIME_4TRANSITIONS
+#define LPTIM_TRIGSAMPLETIME_8TRANSITION LPTIM_TRIGSAMPLETIME_8TRANSITIONS
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_NAND_Aliased_Defines HAL NAND Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define HAL_NAND_Read_Page HAL_NAND_Read_Page_8b
+#define HAL_NAND_Write_Page HAL_NAND_Write_Page_8b
+#define HAL_NAND_Read_SpareArea HAL_NAND_Read_SpareArea_8b
+#define HAL_NAND_Write_SpareArea HAL_NAND_Write_SpareArea_8b
+
+#define NAND_AddressTypedef NAND_AddressTypeDef
+
+#define __ARRAY_ADDRESS ARRAY_ADDRESS
+#define __ADDR_1st_CYCLE ADDR_1ST_CYCLE
+#define __ADDR_2nd_CYCLE ADDR_2ND_CYCLE
+#define __ADDR_3rd_CYCLE ADDR_3RD_CYCLE
+#define __ADDR_4th_CYCLE ADDR_4TH_CYCLE
+/**
+ * @}
+ */
+
+/** @defgroup HAL_NOR_Aliased_Defines HAL NOR Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define NOR_StatusTypedef HAL_NOR_StatusTypeDef
+#define NOR_SUCCESS HAL_NOR_STATUS_SUCCESS
+#define NOR_ONGOING HAL_NOR_STATUS_ONGOING
+#define NOR_ERROR HAL_NOR_STATUS_ERROR
+#define NOR_TIMEOUT HAL_NOR_STATUS_TIMEOUT
+
+#define __NOR_WRITE NOR_WRITE
+#define __NOR_ADDR_SHIFT NOR_ADDR_SHIFT
+/**
+ * @}
+ */
+
+/** @defgroup HAL_OPAMP_Aliased_Defines HAL OPAMP Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define OPAMP_NONINVERTINGINPUT_VP0 OPAMP_NONINVERTINGINPUT_IO0
+#define OPAMP_NONINVERTINGINPUT_VP1 OPAMP_NONINVERTINGINPUT_IO1
+#define OPAMP_NONINVERTINGINPUT_VP2 OPAMP_NONINVERTINGINPUT_IO2
+#define OPAMP_NONINVERTINGINPUT_VP3 OPAMP_NONINVERTINGINPUT_IO3
+
+#define OPAMP_SEC_NONINVERTINGINPUT_VP0 OPAMP_SEC_NONINVERTINGINPUT_IO0
+#define OPAMP_SEC_NONINVERTINGINPUT_VP1 OPAMP_SEC_NONINVERTINGINPUT_IO1
+#define OPAMP_SEC_NONINVERTINGINPUT_VP2 OPAMP_SEC_NONINVERTINGINPUT_IO2
+#define OPAMP_SEC_NONINVERTINGINPUT_VP3 OPAMP_SEC_NONINVERTINGINPUT_IO3
+
+#define OPAMP_INVERTINGINPUT_VM0 OPAMP_INVERTINGINPUT_IO0
+#define OPAMP_INVERTINGINPUT_VM1 OPAMP_INVERTINGINPUT_IO1
+
+#define IOPAMP_INVERTINGINPUT_VM0 OPAMP_INVERTINGINPUT_IO0
+#define IOPAMP_INVERTINGINPUT_VM1 OPAMP_INVERTINGINPUT_IO1
+
+#define OPAMP_SEC_INVERTINGINPUT_VM0 OPAMP_SEC_INVERTINGINPUT_IO0
+#define OPAMP_SEC_INVERTINGINPUT_VM1 OPAMP_SEC_INVERTINGINPUT_IO1
+
+#define OPAMP_INVERTINGINPUT_VINM OPAMP_SEC_INVERTINGINPUT_IO1
+
+#define OPAMP_PGACONNECT_NO OPAMP_PGA_CONNECT_INVERTINGINPUT_NO
+#define OPAMP_PGACONNECT_VM0 OPAMP_PGA_CONNECT_INVERTINGINPUT_IO0
+#define OPAMP_PGACONNECT_VM1 OPAMP_PGA_CONNECT_INVERTINGINPUT_IO1
+
+#if defined(STM32L1) || defined(STM32L4)
+#define HAL_OPAMP_MSP_INIT_CB_ID HAL_OPAMP_MSPINIT_CB_ID
+#define HAL_OPAMP_MSP_DEINIT_CB_ID HAL_OPAMP_MSPDEINIT_CB_ID
+#endif
+
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_I2S_Aliased_Defines HAL I2S Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define I2S_STANDARD_PHILLIPS I2S_STANDARD_PHILIPS
+
+#if defined(STM32H7)
+ #define I2S_IT_TXE I2S_IT_TXP
+ #define I2S_IT_RXNE I2S_IT_RXP
+
+ #define I2S_FLAG_TXE I2S_FLAG_TXP
+ #define I2S_FLAG_RXNE I2S_FLAG_RXP
+#endif
+
+#if defined(STM32F7)
+ #define I2S_CLOCK_SYSCLK I2S_CLOCK_PLL
+#endif
+/**
+ * @}
+ */
+
+/** @defgroup HAL_PCCARD_Aliased_Defines HAL PCCARD Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+/* Compact Flash-ATA registers description */
+#define CF_DATA ATA_DATA
+#define CF_SECTOR_COUNT ATA_SECTOR_COUNT
+#define CF_SECTOR_NUMBER ATA_SECTOR_NUMBER
+#define CF_CYLINDER_LOW ATA_CYLINDER_LOW
+#define CF_CYLINDER_HIGH ATA_CYLINDER_HIGH
+#define CF_CARD_HEAD ATA_CARD_HEAD
+#define CF_STATUS_CMD ATA_STATUS_CMD
+#define CF_STATUS_CMD_ALTERNATE ATA_STATUS_CMD_ALTERNATE
+#define CF_COMMON_DATA_AREA ATA_COMMON_DATA_AREA
+
+/* Compact Flash-ATA commands */
+#define CF_READ_SECTOR_CMD ATA_READ_SECTOR_CMD
+#define CF_WRITE_SECTOR_CMD ATA_WRITE_SECTOR_CMD
+#define CF_ERASE_SECTOR_CMD ATA_ERASE_SECTOR_CMD
+#define CF_IDENTIFY_CMD ATA_IDENTIFY_CMD
+
+#define PCCARD_StatusTypedef HAL_PCCARD_StatusTypeDef
+#define PCCARD_SUCCESS HAL_PCCARD_STATUS_SUCCESS
+#define PCCARD_ONGOING HAL_PCCARD_STATUS_ONGOING
+#define PCCARD_ERROR HAL_PCCARD_STATUS_ERROR
+#define PCCARD_TIMEOUT HAL_PCCARD_STATUS_TIMEOUT
+/**
+ * @}
+ */
+
+/** @defgroup HAL_RTC_Aliased_Defines HAL RTC Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define FORMAT_BIN RTC_FORMAT_BIN
+#define FORMAT_BCD RTC_FORMAT_BCD
+
+#define RTC_ALARMSUBSECONDMASK_None RTC_ALARMSUBSECONDMASK_NONE
+#define RTC_TAMPERERASEBACKUP_DISABLED RTC_TAMPER_ERASE_BACKUP_DISABLE
+#define RTC_TAMPERMASK_FLAG_DISABLED RTC_TAMPERMASK_FLAG_DISABLE
+#define RTC_TAMPERMASK_FLAG_ENABLED RTC_TAMPERMASK_FLAG_ENABLE
+
+#define RTC_MASKTAMPERFLAG_DISABLED RTC_TAMPERMASK_FLAG_DISABLE
+#define RTC_MASKTAMPERFLAG_ENABLED RTC_TAMPERMASK_FLAG_ENABLE
+#define RTC_TAMPERERASEBACKUP_ENABLED RTC_TAMPER_ERASE_BACKUP_ENABLE
+#define RTC_TAMPER1_2_INTERRUPT RTC_ALL_TAMPER_INTERRUPT
+#define RTC_TAMPER1_2_3_INTERRUPT RTC_ALL_TAMPER_INTERRUPT
+
+#define RTC_TIMESTAMPPIN_PC13 RTC_TIMESTAMPPIN_DEFAULT
+#define RTC_TIMESTAMPPIN_PA0 RTC_TIMESTAMPPIN_POS1
+#define RTC_TIMESTAMPPIN_PI8 RTC_TIMESTAMPPIN_POS1
+#define RTC_TIMESTAMPPIN_PC1 RTC_TIMESTAMPPIN_POS2
+
+#define RTC_OUTPUT_REMAP_PC13 RTC_OUTPUT_REMAP_NONE
+#define RTC_OUTPUT_REMAP_PB14 RTC_OUTPUT_REMAP_POS1
+#define RTC_OUTPUT_REMAP_PB2 RTC_OUTPUT_REMAP_POS1
+
+#define RTC_TAMPERPIN_PC13 RTC_TAMPERPIN_DEFAULT
+#define RTC_TAMPERPIN_PA0 RTC_TAMPERPIN_POS1
+#define RTC_TAMPERPIN_PI8 RTC_TAMPERPIN_POS1
+
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_SMARTCARD_Aliased_Defines HAL SMARTCARD Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define SMARTCARD_NACK_ENABLED SMARTCARD_NACK_ENABLE
+#define SMARTCARD_NACK_DISABLED SMARTCARD_NACK_DISABLE
+
+#define SMARTCARD_ONEBIT_SAMPLING_DISABLED SMARTCARD_ONE_BIT_SAMPLE_DISABLE
+#define SMARTCARD_ONEBIT_SAMPLING_ENABLED SMARTCARD_ONE_BIT_SAMPLE_ENABLE
+#define SMARTCARD_ONEBIT_SAMPLING_DISABLE SMARTCARD_ONE_BIT_SAMPLE_DISABLE
+#define SMARTCARD_ONEBIT_SAMPLING_ENABLE SMARTCARD_ONE_BIT_SAMPLE_ENABLE
+
+#define SMARTCARD_TIMEOUT_DISABLED SMARTCARD_TIMEOUT_DISABLE
+#define SMARTCARD_TIMEOUT_ENABLED SMARTCARD_TIMEOUT_ENABLE
+
+#define SMARTCARD_LASTBIT_DISABLED SMARTCARD_LASTBIT_DISABLE
+#define SMARTCARD_LASTBIT_ENABLED SMARTCARD_LASTBIT_ENABLE
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_SMBUS_Aliased_Defines HAL SMBUS Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define SMBUS_DUALADDRESS_DISABLED SMBUS_DUALADDRESS_DISABLE
+#define SMBUS_DUALADDRESS_ENABLED SMBUS_DUALADDRESS_ENABLE
+#define SMBUS_GENERALCALL_DISABLED SMBUS_GENERALCALL_DISABLE
+#define SMBUS_GENERALCALL_ENABLED SMBUS_GENERALCALL_ENABLE
+#define SMBUS_NOSTRETCH_DISABLED SMBUS_NOSTRETCH_DISABLE
+#define SMBUS_NOSTRETCH_ENABLED SMBUS_NOSTRETCH_ENABLE
+#define SMBUS_ANALOGFILTER_ENABLED SMBUS_ANALOGFILTER_ENABLE
+#define SMBUS_ANALOGFILTER_DISABLED SMBUS_ANALOGFILTER_DISABLE
+#define SMBUS_PEC_DISABLED SMBUS_PEC_DISABLE
+#define SMBUS_PEC_ENABLED SMBUS_PEC_ENABLE
+#define HAL_SMBUS_STATE_SLAVE_LISTEN HAL_SMBUS_STATE_LISTEN
+/**
+ * @}
+ */
+
+/** @defgroup HAL_SPI_Aliased_Defines HAL SPI Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define SPI_TIMODE_DISABLED SPI_TIMODE_DISABLE
+#define SPI_TIMODE_ENABLED SPI_TIMODE_ENABLE
+
+#define SPI_CRCCALCULATION_DISABLED SPI_CRCCALCULATION_DISABLE
+#define SPI_CRCCALCULATION_ENABLED SPI_CRCCALCULATION_ENABLE
+
+#define SPI_NSS_PULSE_DISABLED SPI_NSS_PULSE_DISABLE
+#define SPI_NSS_PULSE_ENABLED SPI_NSS_PULSE_ENABLE
+
+#if defined(STM32H7)
+
+ #define SPI_FLAG_TXE SPI_FLAG_TXP
+ #define SPI_FLAG_RXNE SPI_FLAG_RXP
+
+ #define SPI_IT_TXE SPI_IT_TXP
+ #define SPI_IT_RXNE SPI_IT_RXP
+
+ #define SPI_FRLVL_EMPTY SPI_RX_FIFO_0PACKET
+ #define SPI_FRLVL_QUARTER_FULL SPI_RX_FIFO_1PACKET
+ #define SPI_FRLVL_HALF_FULL SPI_RX_FIFO_2PACKET
+ #define SPI_FRLVL_FULL SPI_RX_FIFO_3PACKET
+
+#endif /* STM32H7 */
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_TIM_Aliased_Defines HAL TIM Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define CCER_CCxE_MASK TIM_CCER_CCxE_MASK
+#define CCER_CCxNE_MASK TIM_CCER_CCxNE_MASK
+
+#define TIM_DMABase_CR1 TIM_DMABASE_CR1
+#define TIM_DMABase_CR2 TIM_DMABASE_CR2
+#define TIM_DMABase_SMCR TIM_DMABASE_SMCR
+#define TIM_DMABase_DIER TIM_DMABASE_DIER
+#define TIM_DMABase_SR TIM_DMABASE_SR
+#define TIM_DMABase_EGR TIM_DMABASE_EGR
+#define TIM_DMABase_CCMR1 TIM_DMABASE_CCMR1
+#define TIM_DMABase_CCMR2 TIM_DMABASE_CCMR2
+#define TIM_DMABase_CCER TIM_DMABASE_CCER
+#define TIM_DMABase_CNT TIM_DMABASE_CNT
+#define TIM_DMABase_PSC TIM_DMABASE_PSC
+#define TIM_DMABase_ARR TIM_DMABASE_ARR
+#define TIM_DMABase_RCR TIM_DMABASE_RCR
+#define TIM_DMABase_CCR1 TIM_DMABASE_CCR1
+#define TIM_DMABase_CCR2 TIM_DMABASE_CCR2
+#define TIM_DMABase_CCR3 TIM_DMABASE_CCR3
+#define TIM_DMABase_CCR4 TIM_DMABASE_CCR4
+#define TIM_DMABase_BDTR TIM_DMABASE_BDTR
+#define TIM_DMABase_DCR TIM_DMABASE_DCR
+#define TIM_DMABase_DMAR TIM_DMABASE_DMAR
+#define TIM_DMABase_OR1 TIM_DMABASE_OR1
+#define TIM_DMABase_CCMR3 TIM_DMABASE_CCMR3
+#define TIM_DMABase_CCR5 TIM_DMABASE_CCR5
+#define TIM_DMABase_CCR6 TIM_DMABASE_CCR6
+#define TIM_DMABase_OR2 TIM_DMABASE_OR2
+#define TIM_DMABase_OR3 TIM_DMABASE_OR3
+#define TIM_DMABase_OR TIM_DMABASE_OR
+
+#define TIM_EventSource_Update TIM_EVENTSOURCE_UPDATE
+#define TIM_EventSource_CC1 TIM_EVENTSOURCE_CC1
+#define TIM_EventSource_CC2 TIM_EVENTSOURCE_CC2
+#define TIM_EventSource_CC3 TIM_EVENTSOURCE_CC3
+#define TIM_EventSource_CC4 TIM_EVENTSOURCE_CC4
+#define TIM_EventSource_COM TIM_EVENTSOURCE_COM
+#define TIM_EventSource_Trigger TIM_EVENTSOURCE_TRIGGER
+#define TIM_EventSource_Break TIM_EVENTSOURCE_BREAK
+#define TIM_EventSource_Break2 TIM_EVENTSOURCE_BREAK2
+
+#define TIM_DMABurstLength_1Transfer TIM_DMABURSTLENGTH_1TRANSFER
+#define TIM_DMABurstLength_2Transfers TIM_DMABURSTLENGTH_2TRANSFERS
+#define TIM_DMABurstLength_3Transfers TIM_DMABURSTLENGTH_3TRANSFERS
+#define TIM_DMABurstLength_4Transfers TIM_DMABURSTLENGTH_4TRANSFERS
+#define TIM_DMABurstLength_5Transfers TIM_DMABURSTLENGTH_5TRANSFERS
+#define TIM_DMABurstLength_6Transfers TIM_DMABURSTLENGTH_6TRANSFERS
+#define TIM_DMABurstLength_7Transfers TIM_DMABURSTLENGTH_7TRANSFERS
+#define TIM_DMABurstLength_8Transfers TIM_DMABURSTLENGTH_8TRANSFERS
+#define TIM_DMABurstLength_9Transfers TIM_DMABURSTLENGTH_9TRANSFERS
+#define TIM_DMABurstLength_10Transfers TIM_DMABURSTLENGTH_10TRANSFERS
+#define TIM_DMABurstLength_11Transfers TIM_DMABURSTLENGTH_11TRANSFERS
+#define TIM_DMABurstLength_12Transfers TIM_DMABURSTLENGTH_12TRANSFERS
+#define TIM_DMABurstLength_13Transfers TIM_DMABURSTLENGTH_13TRANSFERS
+#define TIM_DMABurstLength_14Transfers TIM_DMABURSTLENGTH_14TRANSFERS
+#define TIM_DMABurstLength_15Transfers TIM_DMABURSTLENGTH_15TRANSFERS
+#define TIM_DMABurstLength_16Transfers TIM_DMABURSTLENGTH_16TRANSFERS
+#define TIM_DMABurstLength_17Transfers TIM_DMABURSTLENGTH_17TRANSFERS
+#define TIM_DMABurstLength_18Transfers TIM_DMABURSTLENGTH_18TRANSFERS
+
+#if defined(STM32L0)
+#define TIM22_TI1_GPIO1 TIM22_TI1_GPIO
+#define TIM22_TI1_GPIO2 TIM22_TI1_GPIO
+#endif
+
+#if defined(STM32F3)
+#define IS_TIM_HALL_INTERFACE_INSTANCE IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE
+#endif
+
+#if defined(STM32H7)
+#define TIM_TIM1_ETR_COMP1_OUT TIM_TIM1_ETR_COMP1
+#define TIM_TIM1_ETR_COMP2_OUT TIM_TIM1_ETR_COMP2
+#define TIM_TIM8_ETR_COMP1_OUT TIM_TIM8_ETR_COMP1
+#define TIM_TIM8_ETR_COMP2_OUT TIM_TIM8_ETR_COMP2
+#define TIM_TIM2_ETR_COMP1_OUT TIM_TIM2_ETR_COMP1
+#define TIM_TIM2_ETR_COMP2_OUT TIM_TIM2_ETR_COMP2
+#define TIM_TIM3_ETR_COMP1_OUT TIM_TIM3_ETR_COMP1
+#define TIM_TIM1_TI1_COMP1_OUT TIM_TIM1_TI1_COMP1
+#define TIM_TIM8_TI1_COMP2_OUT TIM_TIM8_TI1_COMP2
+#define TIM_TIM2_TI4_COMP1_OUT TIM_TIM2_TI4_COMP1
+#define TIM_TIM2_TI4_COMP2_OUT TIM_TIM2_TI4_COMP2
+#define TIM_TIM2_TI4_COMP1COMP2_OUT TIM_TIM2_TI4_COMP1_COMP2
+#define TIM_TIM3_TI1_COMP1_OUT TIM_TIM3_TI1_COMP1
+#define TIM_TIM3_TI1_COMP2_OUT TIM_TIM3_TI1_COMP2
+#define TIM_TIM3_TI1_COMP1COMP2_OUT TIM_TIM3_TI1_COMP1_COMP2
+#endif
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_TSC_Aliased_Defines HAL TSC Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define TSC_SYNC_POL_FALL TSC_SYNC_POLARITY_FALLING
+#define TSC_SYNC_POL_RISE_HIGH TSC_SYNC_POLARITY_RISING
+/**
+ * @}
+ */
+
+/** @defgroup HAL_UART_Aliased_Defines HAL UART Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define UART_ONEBIT_SAMPLING_DISABLED UART_ONE_BIT_SAMPLE_DISABLE
+#define UART_ONEBIT_SAMPLING_ENABLED UART_ONE_BIT_SAMPLE_ENABLE
+#define UART_ONE_BIT_SAMPLE_DISABLED UART_ONE_BIT_SAMPLE_DISABLE
+#define UART_ONE_BIT_SAMPLE_ENABLED UART_ONE_BIT_SAMPLE_ENABLE
+
+#define __HAL_UART_ONEBIT_ENABLE __HAL_UART_ONE_BIT_SAMPLE_ENABLE
+#define __HAL_UART_ONEBIT_DISABLE __HAL_UART_ONE_BIT_SAMPLE_DISABLE
+
+#define __DIV_SAMPLING16 UART_DIV_SAMPLING16
+#define __DIVMANT_SAMPLING16 UART_DIVMANT_SAMPLING16
+#define __DIVFRAQ_SAMPLING16 UART_DIVFRAQ_SAMPLING16
+#define __UART_BRR_SAMPLING16 UART_BRR_SAMPLING16
+
+#define __DIV_SAMPLING8 UART_DIV_SAMPLING8
+#define __DIVMANT_SAMPLING8 UART_DIVMANT_SAMPLING8
+#define __DIVFRAQ_SAMPLING8 UART_DIVFRAQ_SAMPLING8
+#define __UART_BRR_SAMPLING8 UART_BRR_SAMPLING8
+
+#define __DIV_LPUART UART_DIV_LPUART
+
+#define UART_WAKEUPMETHODE_IDLELINE UART_WAKEUPMETHOD_IDLELINE
+#define UART_WAKEUPMETHODE_ADDRESSMARK UART_WAKEUPMETHOD_ADDRESSMARK
+
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_USART_Aliased_Defines HAL USART Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define USART_CLOCK_DISABLED USART_CLOCK_DISABLE
+#define USART_CLOCK_ENABLED USART_CLOCK_ENABLE
+
+#define USARTNACK_ENABLED USART_NACK_ENABLE
+#define USARTNACK_DISABLED USART_NACK_DISABLE
+/**
+ * @}
+ */
+
+/** @defgroup HAL_WWDG_Aliased_Defines HAL WWDG Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define CFR_BASE WWDG_CFR_BASE
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_CAN_Aliased_Defines HAL CAN Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define CAN_FilterFIFO0 CAN_FILTER_FIFO0
+#define CAN_FilterFIFO1 CAN_FILTER_FIFO1
+#define CAN_IT_RQCP0 CAN_IT_TME
+#define CAN_IT_RQCP1 CAN_IT_TME
+#define CAN_IT_RQCP2 CAN_IT_TME
+#define INAK_TIMEOUT CAN_TIMEOUT_VALUE
+#define SLAK_TIMEOUT CAN_TIMEOUT_VALUE
+#define CAN_TXSTATUS_FAILED ((uint8_t)0x00U)
+#define CAN_TXSTATUS_OK ((uint8_t)0x01U)
+#define CAN_TXSTATUS_PENDING ((uint8_t)0x02U)
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_ETH_Aliased_Defines HAL ETH Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define VLAN_TAG ETH_VLAN_TAG
+#define MIN_ETH_PAYLOAD ETH_MIN_ETH_PAYLOAD
+#define MAX_ETH_PAYLOAD ETH_MAX_ETH_PAYLOAD
+#define JUMBO_FRAME_PAYLOAD ETH_JUMBO_FRAME_PAYLOAD
+#define MACMIIAR_CR_MASK ETH_MACMIIAR_CR_MASK
+#define MACCR_CLEAR_MASK ETH_MACCR_CLEAR_MASK
+#define MACFCR_CLEAR_MASK ETH_MACFCR_CLEAR_MASK
+#define DMAOMR_CLEAR_MASK ETH_DMAOMR_CLEAR_MASK
+
+#define ETH_MMCCR 0x00000100U
+#define ETH_MMCRIR 0x00000104U
+#define ETH_MMCTIR 0x00000108U
+#define ETH_MMCRIMR 0x0000010CU
+#define ETH_MMCTIMR 0x00000110U
+#define ETH_MMCTGFSCCR 0x0000014CU
+#define ETH_MMCTGFMSCCR 0x00000150U
+#define ETH_MMCTGFCR 0x00000168U
+#define ETH_MMCRFCECR 0x00000194U
+#define ETH_MMCRFAECR 0x00000198U
+#define ETH_MMCRGUFCR 0x000001C4U
+
+#define ETH_MAC_TXFIFO_FULL 0x02000000U /* Tx FIFO full */
+#define ETH_MAC_TXFIFONOT_EMPTY 0x01000000U /* Tx FIFO not empty */
+#define ETH_MAC_TXFIFO_WRITE_ACTIVE 0x00400000U /* Tx FIFO write active */
+#define ETH_MAC_TXFIFO_IDLE 0x00000000U /* Tx FIFO read status: Idle */
+#define ETH_MAC_TXFIFO_READ 0x00100000U /* Tx FIFO read status: Read (transferring data to the MAC transmitter) */
+#define ETH_MAC_TXFIFO_WAITING 0x00200000U /* Tx FIFO read status: Waiting for TxStatus from MAC transmitter */
+#define ETH_MAC_TXFIFO_WRITING 0x00300000U /* Tx FIFO read status: Writing the received TxStatus or flushing the TxFIFO */
+#define ETH_MAC_TRANSMISSION_PAUSE 0x00080000U /* MAC transmitter in pause */
+#define ETH_MAC_TRANSMITFRAMECONTROLLER_IDLE 0x00000000U /* MAC transmit frame controller: Idle */
+#define ETH_MAC_TRANSMITFRAMECONTROLLER_WAITING 0x00020000U /* MAC transmit frame controller: Waiting for Status of previous frame or IFG/backoff period to be over */
+#define ETH_MAC_TRANSMITFRAMECONTROLLER_GENRATING_PCF 0x00040000U /* MAC transmit frame controller: Generating and transmitting a Pause control frame (in full duplex mode) */
+#define ETH_MAC_TRANSMITFRAMECONTROLLER_TRANSFERRING 0x00060000U /* MAC transmit frame controller: Transferring input frame for transmission */
+#define ETH_MAC_MII_TRANSMIT_ACTIVE 0x00010000U /* MAC MII transmit engine active */
+#define ETH_MAC_RXFIFO_EMPTY 0x00000000U /* Rx FIFO fill level: empty */
+#define ETH_MAC_RXFIFO_BELOW_THRESHOLD 0x00000100U /* Rx FIFO fill level: fill-level below flow-control de-activate threshold */
+#define ETH_MAC_RXFIFO_ABOVE_THRESHOLD 0x00000200U /* Rx FIFO fill level: fill-level above flow-control activate threshold */
+#define ETH_MAC_RXFIFO_FULL 0x00000300U /* Rx FIFO fill level: full */
+#if defined(STM32F1)
+#else
+#define ETH_MAC_READCONTROLLER_IDLE 0x00000000U /* Rx FIFO read controller IDLE state */
+#define ETH_MAC_READCONTROLLER_READING_DATA 0x00000020U /* Rx FIFO read controller Reading frame data */
+#define ETH_MAC_READCONTROLLER_READING_STATUS 0x00000040U /* Rx FIFO read controller Reading frame status (or time-stamp) */
+#endif
+#define ETH_MAC_READCONTROLLER_FLUSHING 0x00000060U /* Rx FIFO read controller Flushing the frame data and status */
+#define ETH_MAC_RXFIFO_WRITE_ACTIVE 0x00000010U /* Rx FIFO write controller active */
+#define ETH_MAC_SMALL_FIFO_NOTACTIVE 0x00000000U /* MAC small FIFO read / write controllers not active */
+#define ETH_MAC_SMALL_FIFO_READ_ACTIVE 0x00000002U /* MAC small FIFO read controller active */
+#define ETH_MAC_SMALL_FIFO_WRITE_ACTIVE 0x00000004U /* MAC small FIFO write controller active */
+#define ETH_MAC_SMALL_FIFO_RW_ACTIVE 0x00000006U /* MAC small FIFO read / write controllers active */
+#define ETH_MAC_MII_RECEIVE_PROTOCOL_ACTIVE 0x00000001U /* MAC MII receive protocol engine active */
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_DCMI_Aliased_Defines HAL DCMI Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define HAL_DCMI_ERROR_OVF HAL_DCMI_ERROR_OVR
+#define DCMI_IT_OVF DCMI_IT_OVR
+#define DCMI_FLAG_OVFRI DCMI_FLAG_OVRRI
+#define DCMI_FLAG_OVFMI DCMI_FLAG_OVRMI
+
+#define HAL_DCMI_ConfigCROP HAL_DCMI_ConfigCrop
+#define HAL_DCMI_EnableCROP HAL_DCMI_EnableCrop
+#define HAL_DCMI_DisableCROP HAL_DCMI_DisableCrop
+
+/**
+ * @}
+ */
+
+#if defined(STM32L4) || defined(STM32F7) || defined(STM32F427xx) || defined(STM32F437xx) \
+ || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) \
+ || defined(STM32H7)
+/** @defgroup HAL_DMA2D_Aliased_Defines HAL DMA2D Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define DMA2D_ARGB8888 DMA2D_OUTPUT_ARGB8888
+#define DMA2D_RGB888 DMA2D_OUTPUT_RGB888
+#define DMA2D_RGB565 DMA2D_OUTPUT_RGB565
+#define DMA2D_ARGB1555 DMA2D_OUTPUT_ARGB1555
+#define DMA2D_ARGB4444 DMA2D_OUTPUT_ARGB4444
+
+#define CM_ARGB8888 DMA2D_INPUT_ARGB8888
+#define CM_RGB888 DMA2D_INPUT_RGB888
+#define CM_RGB565 DMA2D_INPUT_RGB565
+#define CM_ARGB1555 DMA2D_INPUT_ARGB1555
+#define CM_ARGB4444 DMA2D_INPUT_ARGB4444
+#define CM_L8 DMA2D_INPUT_L8
+#define CM_AL44 DMA2D_INPUT_AL44
+#define CM_AL88 DMA2D_INPUT_AL88
+#define CM_L4 DMA2D_INPUT_L4
+#define CM_A8 DMA2D_INPUT_A8
+#define CM_A4 DMA2D_INPUT_A4
+/**
+ * @}
+ */
+#endif /* STM32L4 || STM32F7 || STM32F4 || STM32H7 */
+
+/** @defgroup HAL_PPP_Aliased_Defines HAL PPP Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup HAL_CRYP_Aliased_Functions HAL CRYP Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define HAL_CRYP_ComputationCpltCallback HAL_CRYPEx_ComputationCpltCallback
+/**
+ * @}
+ */
+
+/** @defgroup HAL_HASH_Aliased_Functions HAL HASH Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define HAL_HASH_STATETypeDef HAL_HASH_StateTypeDef
+#define HAL_HASHPhaseTypeDef HAL_HASH_PhaseTypeDef
+#define HAL_HMAC_MD5_Finish HAL_HASH_MD5_Finish
+#define HAL_HMAC_SHA1_Finish HAL_HASH_SHA1_Finish
+#define HAL_HMAC_SHA224_Finish HAL_HASH_SHA224_Finish
+#define HAL_HMAC_SHA256_Finish HAL_HASH_SHA256_Finish
+
+/*HASH Algorithm Selection*/
+
+#define HASH_AlgoSelection_SHA1 HASH_ALGOSELECTION_SHA1
+#define HASH_AlgoSelection_SHA224 HASH_ALGOSELECTION_SHA224
+#define HASH_AlgoSelection_SHA256 HASH_ALGOSELECTION_SHA256
+#define HASH_AlgoSelection_MD5 HASH_ALGOSELECTION_MD5
+
+#define HASH_AlgoMode_HASH HASH_ALGOMODE_HASH
+#define HASH_AlgoMode_HMAC HASH_ALGOMODE_HMAC
+
+#define HASH_HMACKeyType_ShortKey HASH_HMAC_KEYTYPE_SHORTKEY
+#define HASH_HMACKeyType_LongKey HASH_HMAC_KEYTYPE_LONGKEY
+/**
+ * @}
+ */
+
+/** @defgroup HAL_Aliased_Functions HAL Generic Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define HAL_EnableDBGSleepMode HAL_DBGMCU_EnableDBGSleepMode
+#define HAL_DisableDBGSleepMode HAL_DBGMCU_DisableDBGSleepMode
+#define HAL_EnableDBGStopMode HAL_DBGMCU_EnableDBGStopMode
+#define HAL_DisableDBGStopMode HAL_DBGMCU_DisableDBGStopMode
+#define HAL_EnableDBGStandbyMode HAL_DBGMCU_EnableDBGStandbyMode
+#define HAL_DisableDBGStandbyMode HAL_DBGMCU_DisableDBGStandbyMode
+#define HAL_DBG_LowPowerConfig(Periph, cmd) (((cmd)==ENABLE)? HAL_DBGMCU_DBG_EnableLowPowerConfig(Periph) : HAL_DBGMCU_DBG_DisableLowPowerConfig(Periph))
+#define HAL_VREFINT_OutputSelect HAL_SYSCFG_VREFINT_OutputSelect
+#define HAL_Lock_Cmd(cmd) (((cmd)==ENABLE) ? HAL_SYSCFG_Enable_Lock_VREFINT() : HAL_SYSCFG_Disable_Lock_VREFINT())
+#if defined(STM32L0)
+#else
+#define HAL_VREFINT_Cmd(cmd) (((cmd)==ENABLE)? HAL_SYSCFG_EnableVREFINT() : HAL_SYSCFG_DisableVREFINT())
+#endif
+#define HAL_ADC_EnableBuffer_Cmd(cmd) (((cmd)==ENABLE) ? HAL_ADCEx_EnableVREFINT() : HAL_ADCEx_DisableVREFINT())
+#define HAL_ADC_EnableBufferSensor_Cmd(cmd) (((cmd)==ENABLE) ? HAL_ADCEx_EnableVREFINTTempSensor() : HAL_ADCEx_DisableVREFINTTempSensor())
+/**
+ * @}
+ */
+
+/** @defgroup HAL_FLASH_Aliased_Functions HAL FLASH Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define FLASH_HalfPageProgram HAL_FLASHEx_HalfPageProgram
+#define FLASH_EnableRunPowerDown HAL_FLASHEx_EnableRunPowerDown
+#define FLASH_DisableRunPowerDown HAL_FLASHEx_DisableRunPowerDown
+#define HAL_DATA_EEPROMEx_Unlock HAL_FLASHEx_DATAEEPROM_Unlock
+#define HAL_DATA_EEPROMEx_Lock HAL_FLASHEx_DATAEEPROM_Lock
+#define HAL_DATA_EEPROMEx_Erase HAL_FLASHEx_DATAEEPROM_Erase
+#define HAL_DATA_EEPROMEx_Program HAL_FLASHEx_DATAEEPROM_Program
+
+ /**
+ * @}
+ */
+
+/** @defgroup HAL_I2C_Aliased_Functions HAL I2C Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define HAL_I2CEx_AnalogFilter_Config HAL_I2CEx_ConfigAnalogFilter
+#define HAL_I2CEx_DigitalFilter_Config HAL_I2CEx_ConfigDigitalFilter
+#define HAL_FMPI2CEx_AnalogFilter_Config HAL_FMPI2CEx_ConfigAnalogFilter
+#define HAL_FMPI2CEx_DigitalFilter_Config HAL_FMPI2CEx_ConfigDigitalFilter
+
+#define HAL_I2CFastModePlusConfig(SYSCFG_I2CFastModePlus, cmd) (((cmd)==ENABLE)? HAL_I2CEx_EnableFastModePlus(SYSCFG_I2CFastModePlus): HAL_I2CEx_DisableFastModePlus(SYSCFG_I2CFastModePlus))
+
+#if defined(STM32H7) || defined(STM32WB) || defined(STM32G0) || defined(STM32F0) || defined(STM32F1) || defined(STM32F2) || defined(STM32F3) || defined(STM32F4) || defined(STM32F7) || defined(STM32L0) || defined(STM32L4) || defined(STM32L5) || defined(STM32G4)
+#define HAL_I2C_Master_Sequential_Transmit_IT HAL_I2C_Master_Seq_Transmit_IT
+#define HAL_I2C_Master_Sequential_Receive_IT HAL_I2C_Master_Seq_Receive_IT
+#define HAL_I2C_Slave_Sequential_Transmit_IT HAL_I2C_Slave_Seq_Transmit_IT
+#define HAL_I2C_Slave_Sequential_Receive_IT HAL_I2C_Slave_Seq_Receive_IT
+#endif /* STM32H7 || STM32WB || STM32G0 || STM32F0 || STM32F1 || STM32F2 || STM32F3 || STM32F4 || STM32F7 || STM32L0 || STM32L4 || STM32L5 || STM32G4 */
+#if defined(STM32H7) || defined(STM32WB) || defined(STM32G0) || defined(STM32F4) || defined(STM32F7) || defined(STM32L0) || defined(STM32L4) || defined(STM32L5) || defined(STM32G4)
+#define HAL_I2C_Master_Sequential_Transmit_DMA HAL_I2C_Master_Seq_Transmit_DMA
+#define HAL_I2C_Master_Sequential_Receive_DMA HAL_I2C_Master_Seq_Receive_DMA
+#define HAL_I2C_Slave_Sequential_Transmit_DMA HAL_I2C_Slave_Seq_Transmit_DMA
+#define HAL_I2C_Slave_Sequential_Receive_DMA HAL_I2C_Slave_Seq_Receive_DMA
+#endif /* STM32H7 || STM32WB || STM32G0 || STM32F4 || STM32F7 || STM32L0 || STM32L4 || STM32L5 || STM32G4 */
+
+#if defined(STM32F4)
+#define HAL_FMPI2C_Master_Sequential_Transmit_IT HAL_FMPI2C_Master_Seq_Transmit_IT
+#define HAL_FMPI2C_Master_Sequential_Receive_IT HAL_FMPI2C_Master_Seq_Receive_IT
+#define HAL_FMPI2C_Slave_Sequential_Transmit_IT HAL_FMPI2C_Slave_Seq_Transmit_IT
+#define HAL_FMPI2C_Slave_Sequential_Receive_IT HAL_FMPI2C_Slave_Seq_Receive_IT
+#define HAL_FMPI2C_Master_Sequential_Transmit_DMA HAL_FMPI2C_Master_Seq_Transmit_DMA
+#define HAL_FMPI2C_Master_Sequential_Receive_DMA HAL_FMPI2C_Master_Seq_Receive_DMA
+#define HAL_FMPI2C_Slave_Sequential_Transmit_DMA HAL_FMPI2C_Slave_Seq_Transmit_DMA
+#define HAL_FMPI2C_Slave_Sequential_Receive_DMA HAL_FMPI2C_Slave_Seq_Receive_DMA
+#endif /* STM32F4 */
+ /**
+ * @}
+ */
+
+/** @defgroup HAL_PWR_Aliased HAL PWR Aliased maintained for legacy purpose
+ * @{
+ */
+#define HAL_PWR_PVDConfig HAL_PWR_ConfigPVD
+#define HAL_PWR_DisableBkUpReg HAL_PWREx_DisableBkUpReg
+#define HAL_PWR_DisableFlashPowerDown HAL_PWREx_DisableFlashPowerDown
+#define HAL_PWR_DisableVddio2Monitor HAL_PWREx_DisableVddio2Monitor
+#define HAL_PWR_EnableBkUpReg HAL_PWREx_EnableBkUpReg
+#define HAL_PWR_EnableFlashPowerDown HAL_PWREx_EnableFlashPowerDown
+#define HAL_PWR_EnableVddio2Monitor HAL_PWREx_EnableVddio2Monitor
+#define HAL_PWR_PVD_PVM_IRQHandler HAL_PWREx_PVD_PVM_IRQHandler
+#define HAL_PWR_PVDLevelConfig HAL_PWR_ConfigPVD
+#define HAL_PWR_Vddio2Monitor_IRQHandler HAL_PWREx_Vddio2Monitor_IRQHandler
+#define HAL_PWR_Vddio2MonitorCallback HAL_PWREx_Vddio2MonitorCallback
+#define HAL_PWREx_ActivateOverDrive HAL_PWREx_EnableOverDrive
+#define HAL_PWREx_DeactivateOverDrive HAL_PWREx_DisableOverDrive
+#define HAL_PWREx_DisableSDADCAnalog HAL_PWREx_DisableSDADC
+#define HAL_PWREx_EnableSDADCAnalog HAL_PWREx_EnableSDADC
+#define HAL_PWREx_PVMConfig HAL_PWREx_ConfigPVM
+
+#define PWR_MODE_NORMAL PWR_PVD_MODE_NORMAL
+#define PWR_MODE_IT_RISING PWR_PVD_MODE_IT_RISING
+#define PWR_MODE_IT_FALLING PWR_PVD_MODE_IT_FALLING
+#define PWR_MODE_IT_RISING_FALLING PWR_PVD_MODE_IT_RISING_FALLING
+#define PWR_MODE_EVENT_RISING PWR_PVD_MODE_EVENT_RISING
+#define PWR_MODE_EVENT_FALLING PWR_PVD_MODE_EVENT_FALLING
+#define PWR_MODE_EVENT_RISING_FALLING PWR_PVD_MODE_EVENT_RISING_FALLING
+
+#define CR_OFFSET_BB PWR_CR_OFFSET_BB
+#define CSR_OFFSET_BB PWR_CSR_OFFSET_BB
+#define PMODE_BIT_NUMBER VOS_BIT_NUMBER
+#define CR_PMODE_BB CR_VOS_BB
+
+#define DBP_BitNumber DBP_BIT_NUMBER
+#define PVDE_BitNumber PVDE_BIT_NUMBER
+#define PMODE_BitNumber PMODE_BIT_NUMBER
+#define EWUP_BitNumber EWUP_BIT_NUMBER
+#define FPDS_BitNumber FPDS_BIT_NUMBER
+#define ODEN_BitNumber ODEN_BIT_NUMBER
+#define ODSWEN_BitNumber ODSWEN_BIT_NUMBER
+#define MRLVDS_BitNumber MRLVDS_BIT_NUMBER
+#define LPLVDS_BitNumber LPLVDS_BIT_NUMBER
+#define BRE_BitNumber BRE_BIT_NUMBER
+
+#define PWR_MODE_EVT PWR_PVD_MODE_NORMAL
+
+ /**
+ * @}
+ */
+
+/** @defgroup HAL_SMBUS_Aliased_Functions HAL SMBUS Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define HAL_SMBUS_Slave_Listen_IT HAL_SMBUS_EnableListen_IT
+#define HAL_SMBUS_SlaveAddrCallback HAL_SMBUS_AddrCallback
+#define HAL_SMBUS_SlaveListenCpltCallback HAL_SMBUS_ListenCpltCallback
+/**
+ * @}
+ */
+
+/** @defgroup HAL_SPI_Aliased_Functions HAL SPI Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define HAL_SPI_FlushRxFifo HAL_SPIEx_FlushRxFifo
+/**
+ * @}
+ */
+
+/** @defgroup HAL_TIM_Aliased_Functions HAL TIM Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define HAL_TIM_DMADelayPulseCplt TIM_DMADelayPulseCplt
+#define HAL_TIM_DMAError TIM_DMAError
+#define HAL_TIM_DMACaptureCplt TIM_DMACaptureCplt
+#define HAL_TIMEx_DMACommutationCplt TIMEx_DMACommutationCplt
+#if defined(STM32H7) || defined(STM32G0) || defined(STM32F0) || defined(STM32F1) || defined(STM32F2) || defined(STM32F3) || defined(STM32F4) || defined(STM32F7) || defined(STM32L0) || defined(STM32L4)
+#define HAL_TIM_SlaveConfigSynchronization HAL_TIM_SlaveConfigSynchro
+#define HAL_TIM_SlaveConfigSynchronization_IT HAL_TIM_SlaveConfigSynchro_IT
+#define HAL_TIMEx_CommutationCallback HAL_TIMEx_CommutCallback
+#define HAL_TIMEx_ConfigCommutationEvent HAL_TIMEx_ConfigCommutEvent
+#define HAL_TIMEx_ConfigCommutationEvent_IT HAL_TIMEx_ConfigCommutEvent_IT
+#define HAL_TIMEx_ConfigCommutationEvent_DMA HAL_TIMEx_ConfigCommutEvent_DMA
+#endif /* STM32H7 || STM32G0 || STM32F0 || STM32F1 || STM32F2 || STM32F3 || STM32F4 || STM32F7 || STM32L0 */
+/**
+ * @}
+ */
+
+/** @defgroup HAL_UART_Aliased_Functions HAL UART Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define HAL_UART_WakeupCallback HAL_UARTEx_WakeupCallback
+/**
+ * @}
+ */
+
+/** @defgroup HAL_LTDC_Aliased_Functions HAL LTDC Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define HAL_LTDC_LineEvenCallback HAL_LTDC_LineEventCallback
+#define HAL_LTDC_Relaod HAL_LTDC_Reload
+#define HAL_LTDC_StructInitFromVideoConfig HAL_LTDCEx_StructInitFromVideoConfig
+#define HAL_LTDC_StructInitFromAdaptedCommandConfig HAL_LTDCEx_StructInitFromAdaptedCommandConfig
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_PPP_Aliased_Functions HAL PPP Aliased Functions maintained for legacy purpose
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros ------------------------------------------------------------*/
+
+/** @defgroup HAL_AES_Aliased_Macros HAL CRYP Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define AES_IT_CC CRYP_IT_CC
+#define AES_IT_ERR CRYP_IT_ERR
+#define AES_FLAG_CCF CRYP_FLAG_CCF
+/**
+ * @}
+ */
+
+/** @defgroup HAL_Aliased_Macros HAL Generic Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __HAL_GET_BOOT_MODE __HAL_SYSCFG_GET_BOOT_MODE
+#define __HAL_REMAPMEMORY_FLASH __HAL_SYSCFG_REMAPMEMORY_FLASH
+#define __HAL_REMAPMEMORY_SYSTEMFLASH __HAL_SYSCFG_REMAPMEMORY_SYSTEMFLASH
+#define __HAL_REMAPMEMORY_SRAM __HAL_SYSCFG_REMAPMEMORY_SRAM
+#define __HAL_REMAPMEMORY_FMC __HAL_SYSCFG_REMAPMEMORY_FMC
+#define __HAL_REMAPMEMORY_FMC_SDRAM __HAL_SYSCFG_REMAPMEMORY_FMC_SDRAM
+#define __HAL_REMAPMEMORY_FSMC __HAL_SYSCFG_REMAPMEMORY_FSMC
+#define __HAL_REMAPMEMORY_QUADSPI __HAL_SYSCFG_REMAPMEMORY_QUADSPI
+#define __HAL_FMC_BANK __HAL_SYSCFG_FMC_BANK
+#define __HAL_GET_FLAG __HAL_SYSCFG_GET_FLAG
+#define __HAL_CLEAR_FLAG __HAL_SYSCFG_CLEAR_FLAG
+#define __HAL_VREFINT_OUT_ENABLE __HAL_SYSCFG_VREFINT_OUT_ENABLE
+#define __HAL_VREFINT_OUT_DISABLE __HAL_SYSCFG_VREFINT_OUT_DISABLE
+#define __HAL_SYSCFG_SRAM2_WRP_ENABLE __HAL_SYSCFG_SRAM2_WRP_0_31_ENABLE
+
+#define SYSCFG_FLAG_VREF_READY SYSCFG_FLAG_VREFINT_READY
+#define SYSCFG_FLAG_RC48 RCC_FLAG_HSI48
+#define IS_SYSCFG_FASTMODEPLUS_CONFIG IS_I2C_FASTMODEPLUS
+#define UFB_MODE_BitNumber UFB_MODE_BIT_NUMBER
+#define CMP_PD_BitNumber CMP_PD_BIT_NUMBER
+
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_ADC_Aliased_Macros HAL ADC Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __ADC_ENABLE __HAL_ADC_ENABLE
+#define __ADC_DISABLE __HAL_ADC_DISABLE
+#define __HAL_ADC_ENABLING_CONDITIONS ADC_ENABLING_CONDITIONS
+#define __HAL_ADC_DISABLING_CONDITIONS ADC_DISABLING_CONDITIONS
+#define __HAL_ADC_IS_ENABLED ADC_IS_ENABLE
+#define __ADC_IS_ENABLED ADC_IS_ENABLE
+#define __HAL_ADC_IS_SOFTWARE_START_REGULAR ADC_IS_SOFTWARE_START_REGULAR
+#define __HAL_ADC_IS_SOFTWARE_START_INJECTED ADC_IS_SOFTWARE_START_INJECTED
+#define __HAL_ADC_IS_CONVERSION_ONGOING_REGULAR_INJECTED ADC_IS_CONVERSION_ONGOING_REGULAR_INJECTED
+#define __HAL_ADC_IS_CONVERSION_ONGOING_REGULAR ADC_IS_CONVERSION_ONGOING_REGULAR
+#define __HAL_ADC_IS_CONVERSION_ONGOING_INJECTED ADC_IS_CONVERSION_ONGOING_INJECTED
+#define __HAL_ADC_IS_CONVERSION_ONGOING ADC_IS_CONVERSION_ONGOING
+#define __HAL_ADC_CLEAR_ERRORCODE ADC_CLEAR_ERRORCODE
+
+#define __HAL_ADC_GET_RESOLUTION ADC_GET_RESOLUTION
+#define __HAL_ADC_JSQR_RK ADC_JSQR_RK
+#define __HAL_ADC_CFGR_AWD1CH ADC_CFGR_AWD1CH_SHIFT
+#define __HAL_ADC_CFGR_AWD23CR ADC_CFGR_AWD23CR
+#define __HAL_ADC_CFGR_INJECT_AUTO_CONVERSION ADC_CFGR_INJECT_AUTO_CONVERSION
+#define __HAL_ADC_CFGR_INJECT_CONTEXT_QUEUE ADC_CFGR_INJECT_CONTEXT_QUEUE
+#define __HAL_ADC_CFGR_INJECT_DISCCONTINUOUS ADC_CFGR_INJECT_DISCCONTINUOUS
+#define __HAL_ADC_CFGR_REG_DISCCONTINUOUS ADC_CFGR_REG_DISCCONTINUOUS
+#define __HAL_ADC_CFGR_DISCONTINUOUS_NUM ADC_CFGR_DISCONTINUOUS_NUM
+#define __HAL_ADC_CFGR_AUTOWAIT ADC_CFGR_AUTOWAIT
+#define __HAL_ADC_CFGR_CONTINUOUS ADC_CFGR_CONTINUOUS
+#define __HAL_ADC_CFGR_OVERRUN ADC_CFGR_OVERRUN
+#define __HAL_ADC_CFGR_DMACONTREQ ADC_CFGR_DMACONTREQ
+#define __HAL_ADC_CFGR_EXTSEL ADC_CFGR_EXTSEL_SET
+#define __HAL_ADC_JSQR_JEXTSEL ADC_JSQR_JEXTSEL_SET
+#define __HAL_ADC_OFR_CHANNEL ADC_OFR_CHANNEL
+#define __HAL_ADC_DIFSEL_CHANNEL ADC_DIFSEL_CHANNEL
+#define __HAL_ADC_CALFACT_DIFF_SET ADC_CALFACT_DIFF_SET
+#define __HAL_ADC_CALFACT_DIFF_GET ADC_CALFACT_DIFF_GET
+#define __HAL_ADC_TRX_HIGHTHRESHOLD ADC_TRX_HIGHTHRESHOLD
+
+#define __HAL_ADC_OFFSET_SHIFT_RESOLUTION ADC_OFFSET_SHIFT_RESOLUTION
+#define __HAL_ADC_AWD1THRESHOLD_SHIFT_RESOLUTION ADC_AWD1THRESHOLD_SHIFT_RESOLUTION
+#define __HAL_ADC_AWD23THRESHOLD_SHIFT_RESOLUTION ADC_AWD23THRESHOLD_SHIFT_RESOLUTION
+#define __HAL_ADC_COMMON_REGISTER ADC_COMMON_REGISTER
+#define __HAL_ADC_COMMON_CCR_MULTI ADC_COMMON_CCR_MULTI
+#define __HAL_ADC_MULTIMODE_IS_ENABLED ADC_MULTIMODE_IS_ENABLE
+#define __ADC_MULTIMODE_IS_ENABLED ADC_MULTIMODE_IS_ENABLE
+#define __HAL_ADC_NONMULTIMODE_OR_MULTIMODEMASTER ADC_NONMULTIMODE_OR_MULTIMODEMASTER
+#define __HAL_ADC_COMMON_ADC_OTHER ADC_COMMON_ADC_OTHER
+#define __HAL_ADC_MULTI_SLAVE ADC_MULTI_SLAVE
+
+#define __HAL_ADC_SQR1_L ADC_SQR1_L_SHIFT
+#define __HAL_ADC_JSQR_JL ADC_JSQR_JL_SHIFT
+#define __HAL_ADC_JSQR_RK_JL ADC_JSQR_RK_JL
+#define __HAL_ADC_CR1_DISCONTINUOUS_NUM ADC_CR1_DISCONTINUOUS_NUM
+#define __HAL_ADC_CR1_SCAN ADC_CR1_SCAN_SET
+#define __HAL_ADC_CONVCYCLES_MAX_RANGE ADC_CONVCYCLES_MAX_RANGE
+#define __HAL_ADC_CLOCK_PRESCALER_RANGE ADC_CLOCK_PRESCALER_RANGE
+#define __HAL_ADC_GET_CLOCK_PRESCALER ADC_GET_CLOCK_PRESCALER
+
+#define __HAL_ADC_SQR1 ADC_SQR1
+#define __HAL_ADC_SMPR1 ADC_SMPR1
+#define __HAL_ADC_SMPR2 ADC_SMPR2
+#define __HAL_ADC_SQR3_RK ADC_SQR3_RK
+#define __HAL_ADC_SQR2_RK ADC_SQR2_RK
+#define __HAL_ADC_SQR1_RK ADC_SQR1_RK
+#define __HAL_ADC_CR2_CONTINUOUS ADC_CR2_CONTINUOUS
+#define __HAL_ADC_CR1_DISCONTINUOUS ADC_CR1_DISCONTINUOUS
+#define __HAL_ADC_CR1_SCANCONV ADC_CR1_SCANCONV
+#define __HAL_ADC_CR2_EOCSelection ADC_CR2_EOCSelection
+#define __HAL_ADC_CR2_DMAContReq ADC_CR2_DMAContReq
+#define __HAL_ADC_JSQR ADC_JSQR
+
+#define __HAL_ADC_CHSELR_CHANNEL ADC_CHSELR_CHANNEL
+#define __HAL_ADC_CFGR1_REG_DISCCONTINUOUS ADC_CFGR1_REG_DISCCONTINUOUS
+#define __HAL_ADC_CFGR1_AUTOOFF ADC_CFGR1_AUTOOFF
+#define __HAL_ADC_CFGR1_AUTOWAIT ADC_CFGR1_AUTOWAIT
+#define __HAL_ADC_CFGR1_CONTINUOUS ADC_CFGR1_CONTINUOUS
+#define __HAL_ADC_CFGR1_OVERRUN ADC_CFGR1_OVERRUN
+#define __HAL_ADC_CFGR1_SCANDIR ADC_CFGR1_SCANDIR
+#define __HAL_ADC_CFGR1_DMACONTREQ ADC_CFGR1_DMACONTREQ
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_DAC_Aliased_Macros HAL DAC Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __HAL_DHR12R1_ALIGNEMENT DAC_DHR12R1_ALIGNMENT
+#define __HAL_DHR12R2_ALIGNEMENT DAC_DHR12R2_ALIGNMENT
+#define __HAL_DHR12RD_ALIGNEMENT DAC_DHR12RD_ALIGNMENT
+#define IS_DAC_GENERATE_WAVE IS_DAC_WAVE
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_DBGMCU_Aliased_Macros HAL DBGMCU Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __HAL_FREEZE_TIM1_DBGMCU __HAL_DBGMCU_FREEZE_TIM1
+#define __HAL_UNFREEZE_TIM1_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM1
+#define __HAL_FREEZE_TIM2_DBGMCU __HAL_DBGMCU_FREEZE_TIM2
+#define __HAL_UNFREEZE_TIM2_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM2
+#define __HAL_FREEZE_TIM3_DBGMCU __HAL_DBGMCU_FREEZE_TIM3
+#define __HAL_UNFREEZE_TIM3_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM3
+#define __HAL_FREEZE_TIM4_DBGMCU __HAL_DBGMCU_FREEZE_TIM4
+#define __HAL_UNFREEZE_TIM4_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM4
+#define __HAL_FREEZE_TIM5_DBGMCU __HAL_DBGMCU_FREEZE_TIM5
+#define __HAL_UNFREEZE_TIM5_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM5
+#define __HAL_FREEZE_TIM6_DBGMCU __HAL_DBGMCU_FREEZE_TIM6
+#define __HAL_UNFREEZE_TIM6_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM6
+#define __HAL_FREEZE_TIM7_DBGMCU __HAL_DBGMCU_FREEZE_TIM7
+#define __HAL_UNFREEZE_TIM7_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM7
+#define __HAL_FREEZE_TIM8_DBGMCU __HAL_DBGMCU_FREEZE_TIM8
+#define __HAL_UNFREEZE_TIM8_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM8
+
+#define __HAL_FREEZE_TIM9_DBGMCU __HAL_DBGMCU_FREEZE_TIM9
+#define __HAL_UNFREEZE_TIM9_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM9
+#define __HAL_FREEZE_TIM10_DBGMCU __HAL_DBGMCU_FREEZE_TIM10
+#define __HAL_UNFREEZE_TIM10_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM10
+#define __HAL_FREEZE_TIM11_DBGMCU __HAL_DBGMCU_FREEZE_TIM11
+#define __HAL_UNFREEZE_TIM11_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM11
+#define __HAL_FREEZE_TIM12_DBGMCU __HAL_DBGMCU_FREEZE_TIM12
+#define __HAL_UNFREEZE_TIM12_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM12
+#define __HAL_FREEZE_TIM13_DBGMCU __HAL_DBGMCU_FREEZE_TIM13
+#define __HAL_UNFREEZE_TIM13_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM13
+#define __HAL_FREEZE_TIM14_DBGMCU __HAL_DBGMCU_FREEZE_TIM14
+#define __HAL_UNFREEZE_TIM14_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM14
+#define __HAL_FREEZE_CAN2_DBGMCU __HAL_DBGMCU_FREEZE_CAN2
+#define __HAL_UNFREEZE_CAN2_DBGMCU __HAL_DBGMCU_UNFREEZE_CAN2
+
+
+#define __HAL_FREEZE_TIM15_DBGMCU __HAL_DBGMCU_FREEZE_TIM15
+#define __HAL_UNFREEZE_TIM15_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM15
+#define __HAL_FREEZE_TIM16_DBGMCU __HAL_DBGMCU_FREEZE_TIM16
+#define __HAL_UNFREEZE_TIM16_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM16
+#define __HAL_FREEZE_TIM17_DBGMCU __HAL_DBGMCU_FREEZE_TIM17
+#define __HAL_UNFREEZE_TIM17_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM17
+#define __HAL_FREEZE_RTC_DBGMCU __HAL_DBGMCU_FREEZE_RTC
+#define __HAL_UNFREEZE_RTC_DBGMCU __HAL_DBGMCU_UNFREEZE_RTC
+#if defined(STM32H7)
+ #define __HAL_FREEZE_WWDG_DBGMCU __HAL_DBGMCU_FREEZE_WWDG1
+ #define __HAL_UNFREEZE_WWDG_DBGMCU __HAL_DBGMCU_UnFreeze_WWDG1
+ #define __HAL_FREEZE_IWDG_DBGMCU __HAL_DBGMCU_FREEZE_IWDG1
+ #define __HAL_UNFREEZE_IWDG_DBGMCU __HAL_DBGMCU_UnFreeze_IWDG1
+#else
+ #define __HAL_FREEZE_WWDG_DBGMCU __HAL_DBGMCU_FREEZE_WWDG
+ #define __HAL_UNFREEZE_WWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_WWDG
+ #define __HAL_FREEZE_IWDG_DBGMCU __HAL_DBGMCU_FREEZE_IWDG
+ #define __HAL_UNFREEZE_IWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_IWDG
+#endif /* STM32H7 */
+#define __HAL_FREEZE_I2C1_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT
+#define __HAL_UNFREEZE_I2C1_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT
+#define __HAL_FREEZE_I2C2_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT
+#define __HAL_UNFREEZE_I2C2_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C2_TIMEOUT
+#define __HAL_FREEZE_I2C3_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C3_TIMEOUT
+#define __HAL_UNFREEZE_I2C3_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C3_TIMEOUT
+#define __HAL_FREEZE_CAN1_DBGMCU __HAL_DBGMCU_FREEZE_CAN1
+#define __HAL_UNFREEZE_CAN1_DBGMCU __HAL_DBGMCU_UNFREEZE_CAN1
+#define __HAL_FREEZE_LPTIM1_DBGMCU __HAL_DBGMCU_FREEZE_LPTIM1
+#define __HAL_UNFREEZE_LPTIM1_DBGMCU __HAL_DBGMCU_UNFREEZE_LPTIM1
+#define __HAL_FREEZE_LPTIM2_DBGMCU __HAL_DBGMCU_FREEZE_LPTIM2
+#define __HAL_UNFREEZE_LPTIM2_DBGMCU __HAL_DBGMCU_UNFREEZE_LPTIM2
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_COMP_Aliased_Macros HAL COMP Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#if defined(STM32F3)
+#define COMP_START __HAL_COMP_ENABLE
+#define COMP_STOP __HAL_COMP_DISABLE
+#define COMP_LOCK __HAL_COMP_LOCK
+
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \
+ __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE() : \
+ __HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE() : \
+ __HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE() : \
+ __HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_IT() : \
+ __HAL_COMP_COMP6_EXTI_ENABLE_IT())
+#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_IT() : \
+ __HAL_COMP_COMP6_EXTI_DISABLE_IT())
+#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_GET_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_GET_FLAG() : \
+ __HAL_COMP_COMP6_EXTI_GET_FLAG())
+#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \
+ __HAL_COMP_COMP6_EXTI_CLEAR_FLAG())
+# endif
+# if defined(STM32F302xE) || defined(STM32F302xC)
+#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \
+ __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE() : \
+ __HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE() : \
+ __HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE() : \
+ __HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_IT() : \
+ __HAL_COMP_COMP6_EXTI_ENABLE_IT())
+#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_IT() : \
+ __HAL_COMP_COMP6_EXTI_DISABLE_IT())
+#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_GET_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_GET_FLAG() : \
+ __HAL_COMP_COMP6_EXTI_GET_FLAG())
+#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \
+ __HAL_COMP_COMP6_EXTI_CLEAR_FLAG())
+# endif
+# if defined(STM32F303xE) || defined(STM32F398xx) || defined(STM32F303xC) || defined(STM32F358xx)
+#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_ENABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE() : \
+ __HAL_COMP_COMP7_EXTI_ENABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_DISABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_DISABLE_RISING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE() : \
+ __HAL_COMP_COMP7_EXTI_DISABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_ENABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE() : \
+ __HAL_COMP_COMP7_EXTI_ENABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_DISABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_DISABLE_FALLING_EDGE() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE() : \
+ __HAL_COMP_COMP7_EXTI_DISABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_ENABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_ENABLE_IT() : \
+ __HAL_COMP_COMP7_EXTI_ENABLE_IT())
+#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_DISABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_DISABLE_IT() : \
+ ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_DISABLE_IT() : \
+ __HAL_COMP_COMP7_EXTI_DISABLE_IT())
+#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_GET_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_GET_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_GET_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_GET_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_GET_FLAG() : \
+ __HAL_COMP_COMP7_EXTI_GET_FLAG())
+#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_CLEAR_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_CLEAR_FLAG() : \
+ ((__FLAG__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_CLEAR_FLAG() : \
+ __HAL_COMP_COMP7_EXTI_CLEAR_FLAG())
+# endif
+# if defined(STM32F373xC) ||defined(STM32F378xx)
+#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \
+ __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \
+ __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \
+ __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \
+ __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \
+ __HAL_COMP_COMP2_EXTI_ENABLE_IT())
+#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \
+ __HAL_COMP_COMP2_EXTI_DISABLE_IT())
+#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \
+ __HAL_COMP_COMP2_EXTI_GET_FLAG())
+#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \
+ __HAL_COMP_COMP2_EXTI_CLEAR_FLAG())
+# endif
+#else
+#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \
+ __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \
+ __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \
+ __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \
+ __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \
+ __HAL_COMP_COMP2_EXTI_ENABLE_IT())
+#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \
+ __HAL_COMP_COMP2_EXTI_DISABLE_IT())
+#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \
+ __HAL_COMP_COMP2_EXTI_GET_FLAG())
+#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \
+ __HAL_COMP_COMP2_EXTI_CLEAR_FLAG())
+#endif
+
+#define __HAL_COMP_GET_EXTI_LINE COMP_GET_EXTI_LINE
+
+#if defined(STM32L0) || defined(STM32L4)
+/* Note: On these STM32 families, the only argument of this macro */
+/* is COMP_FLAG_LOCK. */
+/* This macro is replaced by __HAL_COMP_IS_LOCKED with only HAL handle */
+/* argument. */
+#define __HAL_COMP_GET_FLAG(__HANDLE__, __FLAG__) (__HAL_COMP_IS_LOCKED(__HANDLE__))
+#endif
+/**
+ * @}
+ */
+
+#if defined(STM32L0) || defined(STM32L4)
+/** @defgroup HAL_COMP_Aliased_Functions HAL COMP Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define HAL_COMP_Start_IT HAL_COMP_Start /* Function considered as legacy as EXTI event or IT configuration is done into HAL_COMP_Init() */
+#define HAL_COMP_Stop_IT HAL_COMP_Stop /* Function considered as legacy as EXTI event or IT configuration is done into HAL_COMP_Init() */
+/**
+ * @}
+ */
+#endif
+
+/** @defgroup HAL_DAC_Aliased_Macros HAL DAC Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define IS_DAC_WAVE(WAVE) (((WAVE) == DAC_WAVE_NONE) || \
+ ((WAVE) == DAC_WAVE_NOISE)|| \
+ ((WAVE) == DAC_WAVE_TRIANGLE))
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_FLASH_Aliased_Macros HAL FLASH Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define IS_WRPAREA IS_OB_WRPAREA
+#define IS_TYPEPROGRAM IS_FLASH_TYPEPROGRAM
+#define IS_TYPEPROGRAMFLASH IS_FLASH_TYPEPROGRAM
+#define IS_TYPEERASE IS_FLASH_TYPEERASE
+#define IS_NBSECTORS IS_FLASH_NBSECTORS
+#define IS_OB_WDG_SOURCE IS_OB_IWDG_SOURCE
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_I2C_Aliased_Macros HAL I2C Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define __HAL_I2C_RESET_CR2 I2C_RESET_CR2
+#define __HAL_I2C_GENERATE_START I2C_GENERATE_START
+#if defined(STM32F1)
+#define __HAL_I2C_FREQ_RANGE I2C_FREQRANGE
+#else
+#define __HAL_I2C_FREQ_RANGE I2C_FREQ_RANGE
+#endif /* STM32F1 */
+#define __HAL_I2C_RISE_TIME I2C_RISE_TIME
+#define __HAL_I2C_SPEED_STANDARD I2C_SPEED_STANDARD
+#define __HAL_I2C_SPEED_FAST I2C_SPEED_FAST
+#define __HAL_I2C_SPEED I2C_SPEED
+#define __HAL_I2C_7BIT_ADD_WRITE I2C_7BIT_ADD_WRITE
+#define __HAL_I2C_7BIT_ADD_READ I2C_7BIT_ADD_READ
+#define __HAL_I2C_10BIT_ADDRESS I2C_10BIT_ADDRESS
+#define __HAL_I2C_10BIT_HEADER_WRITE I2C_10BIT_HEADER_WRITE
+#define __HAL_I2C_10BIT_HEADER_READ I2C_10BIT_HEADER_READ
+#define __HAL_I2C_MEM_ADD_MSB I2C_MEM_ADD_MSB
+#define __HAL_I2C_MEM_ADD_LSB I2C_MEM_ADD_LSB
+#define __HAL_I2C_FREQRANGE I2C_FREQRANGE
+/**
+ * @}
+ */
+
+/** @defgroup HAL_I2S_Aliased_Macros HAL I2S Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define IS_I2S_INSTANCE IS_I2S_ALL_INSTANCE
+#define IS_I2S_INSTANCE_EXT IS_I2S_ALL_INSTANCE_EXT
+
+#if defined(STM32H7)
+ #define __HAL_I2S_CLEAR_FREFLAG __HAL_I2S_CLEAR_TIFREFLAG
+#endif
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_IRDA_Aliased_Macros HAL IRDA Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define __IRDA_DISABLE __HAL_IRDA_DISABLE
+#define __IRDA_ENABLE __HAL_IRDA_ENABLE
+
+#define __HAL_IRDA_GETCLOCKSOURCE IRDA_GETCLOCKSOURCE
+#define __HAL_IRDA_MASK_COMPUTATION IRDA_MASK_COMPUTATION
+#define __IRDA_GETCLOCKSOURCE IRDA_GETCLOCKSOURCE
+#define __IRDA_MASK_COMPUTATION IRDA_MASK_COMPUTATION
+
+#define IS_IRDA_ONEBIT_SAMPLE IS_IRDA_ONE_BIT_SAMPLE
+
+
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_IWDG_Aliased_Macros HAL IWDG Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __HAL_IWDG_ENABLE_WRITE_ACCESS IWDG_ENABLE_WRITE_ACCESS
+#define __HAL_IWDG_DISABLE_WRITE_ACCESS IWDG_DISABLE_WRITE_ACCESS
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_LPTIM_Aliased_Macros HAL LPTIM Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define __HAL_LPTIM_ENABLE_INTERRUPT __HAL_LPTIM_ENABLE_IT
+#define __HAL_LPTIM_DISABLE_INTERRUPT __HAL_LPTIM_DISABLE_IT
+#define __HAL_LPTIM_GET_ITSTATUS __HAL_LPTIM_GET_IT_SOURCE
+
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_OPAMP_Aliased_Macros HAL OPAMP Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __OPAMP_CSR_OPAXPD OPAMP_CSR_OPAXPD
+#define __OPAMP_CSR_S3SELX OPAMP_CSR_S3SELX
+#define __OPAMP_CSR_S4SELX OPAMP_CSR_S4SELX
+#define __OPAMP_CSR_S5SELX OPAMP_CSR_S5SELX
+#define __OPAMP_CSR_S6SELX OPAMP_CSR_S6SELX
+#define __OPAMP_CSR_OPAXCAL_L OPAMP_CSR_OPAXCAL_L
+#define __OPAMP_CSR_OPAXCAL_H OPAMP_CSR_OPAXCAL_H
+#define __OPAMP_CSR_OPAXLPM OPAMP_CSR_OPAXLPM
+#define __OPAMP_CSR_ALL_SWITCHES OPAMP_CSR_ALL_SWITCHES
+#define __OPAMP_CSR_ANAWSELX OPAMP_CSR_ANAWSELX
+#define __OPAMP_CSR_OPAXCALOUT OPAMP_CSR_OPAXCALOUT
+#define __OPAMP_OFFSET_TRIM_BITSPOSITION OPAMP_OFFSET_TRIM_BITSPOSITION
+#define __OPAMP_OFFSET_TRIM_SET OPAMP_OFFSET_TRIM_SET
+
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_PWR_Aliased_Macros HAL PWR Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __HAL_PVD_EVENT_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_EVENT
+#define __HAL_PVD_EVENT_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_EVENT
+#define __HAL_PVD_EXTI_FALLINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE
+#define __HAL_PVD_EXTI_FALLINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_PVD_EXTI_RISINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE
+#define __HAL_PVD_EXTI_RISINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE
+#define __HAL_PVM_EVENT_DISABLE __HAL_PWR_PVM_EVENT_DISABLE
+#define __HAL_PVM_EVENT_ENABLE __HAL_PWR_PVM_EVENT_ENABLE
+#define __HAL_PVM_EXTI_FALLINGTRIGGER_DISABLE __HAL_PWR_PVM_EXTI_FALLINGTRIGGER_DISABLE
+#define __HAL_PVM_EXTI_FALLINGTRIGGER_ENABLE __HAL_PWR_PVM_EXTI_FALLINGTRIGGER_ENABLE
+#define __HAL_PVM_EXTI_RISINGTRIGGER_DISABLE __HAL_PWR_PVM_EXTI_RISINGTRIGGER_DISABLE
+#define __HAL_PVM_EXTI_RISINGTRIGGER_ENABLE __HAL_PWR_PVM_EXTI_RISINGTRIGGER_ENABLE
+#define __HAL_PWR_INTERNALWAKEUP_DISABLE HAL_PWREx_DisableInternalWakeUpLine
+#define __HAL_PWR_INTERNALWAKEUP_ENABLE HAL_PWREx_EnableInternalWakeUpLine
+#define __HAL_PWR_PULL_UP_DOWN_CONFIG_DISABLE HAL_PWREx_DisablePullUpPullDownConfig
+#define __HAL_PWR_PULL_UP_DOWN_CONFIG_ENABLE HAL_PWREx_EnablePullUpPullDownConfig
+#define __HAL_PWR_PVD_EXTI_CLEAR_EGDE_TRIGGER() do { __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE(); } while(0)
+#define __HAL_PWR_PVD_EXTI_EVENT_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_EVENT
+#define __HAL_PWR_PVD_EXTI_EVENT_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_EVENT
+#define __HAL_PWR_PVD_EXTI_FALLINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE
+#define __HAL_PWR_PVD_EXTI_FALLINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_PWR_PVD_EXTI_RISINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE
+#define __HAL_PWR_PVD_EXTI_RISINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE
+#define __HAL_PWR_PVD_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_PWR_PVD_EXTI_SET_RISING_EDGE_TRIGGER __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE
+#define __HAL_PWR_PVM_DISABLE() do { HAL_PWREx_DisablePVM1();HAL_PWREx_DisablePVM2();HAL_PWREx_DisablePVM3();HAL_PWREx_DisablePVM4(); } while(0)
+#define __HAL_PWR_PVM_ENABLE() do { HAL_PWREx_EnablePVM1();HAL_PWREx_EnablePVM2();HAL_PWREx_EnablePVM3();HAL_PWREx_EnablePVM4(); } while(0)
+#define __HAL_PWR_SRAM2CONTENT_PRESERVE_DISABLE HAL_PWREx_DisableSRAM2ContentRetention
+#define __HAL_PWR_SRAM2CONTENT_PRESERVE_ENABLE HAL_PWREx_EnableSRAM2ContentRetention
+#define __HAL_PWR_VDDIO2_DISABLE HAL_PWREx_DisableVddIO2
+#define __HAL_PWR_VDDIO2_ENABLE HAL_PWREx_EnableVddIO2
+#define __HAL_PWR_VDDIO2_EXTI_CLEAR_EGDE_TRIGGER __HAL_PWR_VDDIO2_EXTI_DISABLE_FALLING_EDGE
+#define __HAL_PWR_VDDIO2_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_PWR_VDDIO2_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_PWR_VDDUSB_DISABLE HAL_PWREx_DisableVddUSB
+#define __HAL_PWR_VDDUSB_ENABLE HAL_PWREx_EnableVddUSB
+
+#if defined (STM32F4)
+#define __HAL_PVD_EXTI_ENABLE_IT(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_ENABLE_IT()
+#define __HAL_PVD_EXTI_DISABLE_IT(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_DISABLE_IT()
+#define __HAL_PVD_EXTI_GET_FLAG(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_GET_FLAG()
+#define __HAL_PVD_EXTI_CLEAR_FLAG(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_CLEAR_FLAG()
+#define __HAL_PVD_EXTI_GENERATE_SWIT(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_GENERATE_SWIT()
+#else
+#define __HAL_PVD_EXTI_CLEAR_FLAG __HAL_PWR_PVD_EXTI_CLEAR_FLAG
+#define __HAL_PVD_EXTI_DISABLE_IT __HAL_PWR_PVD_EXTI_DISABLE_IT
+#define __HAL_PVD_EXTI_ENABLE_IT __HAL_PWR_PVD_EXTI_ENABLE_IT
+#define __HAL_PVD_EXTI_GENERATE_SWIT __HAL_PWR_PVD_EXTI_GENERATE_SWIT
+#define __HAL_PVD_EXTI_GET_FLAG __HAL_PWR_PVD_EXTI_GET_FLAG
+#endif /* STM32F4 */
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_RCC_Aliased HAL RCC Aliased maintained for legacy purpose
+ * @{
+ */
+
+#define RCC_StopWakeUpClock_MSI RCC_STOP_WAKEUPCLOCK_MSI
+#define RCC_StopWakeUpClock_HSI RCC_STOP_WAKEUPCLOCK_HSI
+
+#define HAL_RCC_CCSCallback HAL_RCC_CSSCallback
+#define HAL_RC48_EnableBuffer_Cmd(cmd) (((cmd)==ENABLE) ? HAL_RCCEx_EnableHSI48_VREFINT() : HAL_RCCEx_DisableHSI48_VREFINT())
+
+#define __ADC_CLK_DISABLE __HAL_RCC_ADC_CLK_DISABLE
+#define __ADC_CLK_ENABLE __HAL_RCC_ADC_CLK_ENABLE
+#define __ADC_CLK_SLEEP_DISABLE __HAL_RCC_ADC_CLK_SLEEP_DISABLE
+#define __ADC_CLK_SLEEP_ENABLE __HAL_RCC_ADC_CLK_SLEEP_ENABLE
+#define __ADC_FORCE_RESET __HAL_RCC_ADC_FORCE_RESET
+#define __ADC_RELEASE_RESET __HAL_RCC_ADC_RELEASE_RESET
+#define __ADC1_CLK_DISABLE __HAL_RCC_ADC1_CLK_DISABLE
+#define __ADC1_CLK_ENABLE __HAL_RCC_ADC1_CLK_ENABLE
+#define __ADC1_FORCE_RESET __HAL_RCC_ADC1_FORCE_RESET
+#define __ADC1_RELEASE_RESET __HAL_RCC_ADC1_RELEASE_RESET
+#define __ADC1_CLK_SLEEP_ENABLE __HAL_RCC_ADC1_CLK_SLEEP_ENABLE
+#define __ADC1_CLK_SLEEP_DISABLE __HAL_RCC_ADC1_CLK_SLEEP_DISABLE
+#define __ADC2_CLK_DISABLE __HAL_RCC_ADC2_CLK_DISABLE
+#define __ADC2_CLK_ENABLE __HAL_RCC_ADC2_CLK_ENABLE
+#define __ADC2_FORCE_RESET __HAL_RCC_ADC2_FORCE_RESET
+#define __ADC2_RELEASE_RESET __HAL_RCC_ADC2_RELEASE_RESET
+#define __ADC3_CLK_DISABLE __HAL_RCC_ADC3_CLK_DISABLE
+#define __ADC3_CLK_ENABLE __HAL_RCC_ADC3_CLK_ENABLE
+#define __ADC3_FORCE_RESET __HAL_RCC_ADC3_FORCE_RESET
+#define __ADC3_RELEASE_RESET __HAL_RCC_ADC3_RELEASE_RESET
+#define __AES_CLK_DISABLE __HAL_RCC_AES_CLK_DISABLE
+#define __AES_CLK_ENABLE __HAL_RCC_AES_CLK_ENABLE
+#define __AES_CLK_SLEEP_DISABLE __HAL_RCC_AES_CLK_SLEEP_DISABLE
+#define __AES_CLK_SLEEP_ENABLE __HAL_RCC_AES_CLK_SLEEP_ENABLE
+#define __AES_FORCE_RESET __HAL_RCC_AES_FORCE_RESET
+#define __AES_RELEASE_RESET __HAL_RCC_AES_RELEASE_RESET
+#define __CRYP_CLK_SLEEP_ENABLE __HAL_RCC_CRYP_CLK_SLEEP_ENABLE
+#define __CRYP_CLK_SLEEP_DISABLE __HAL_RCC_CRYP_CLK_SLEEP_DISABLE
+#define __CRYP_CLK_ENABLE __HAL_RCC_CRYP_CLK_ENABLE
+#define __CRYP_CLK_DISABLE __HAL_RCC_CRYP_CLK_DISABLE
+#define __CRYP_FORCE_RESET __HAL_RCC_CRYP_FORCE_RESET
+#define __CRYP_RELEASE_RESET __HAL_RCC_CRYP_RELEASE_RESET
+#define __AFIO_CLK_DISABLE __HAL_RCC_AFIO_CLK_DISABLE
+#define __AFIO_CLK_ENABLE __HAL_RCC_AFIO_CLK_ENABLE
+#define __AFIO_FORCE_RESET __HAL_RCC_AFIO_FORCE_RESET
+#define __AFIO_RELEASE_RESET __HAL_RCC_AFIO_RELEASE_RESET
+#define __AHB_FORCE_RESET __HAL_RCC_AHB_FORCE_RESET
+#define __AHB_RELEASE_RESET __HAL_RCC_AHB_RELEASE_RESET
+#define __AHB1_FORCE_RESET __HAL_RCC_AHB1_FORCE_RESET
+#define __AHB1_RELEASE_RESET __HAL_RCC_AHB1_RELEASE_RESET
+#define __AHB2_FORCE_RESET __HAL_RCC_AHB2_FORCE_RESET
+#define __AHB2_RELEASE_RESET __HAL_RCC_AHB2_RELEASE_RESET
+#define __AHB3_FORCE_RESET __HAL_RCC_AHB3_FORCE_RESET
+#define __AHB3_RELEASE_RESET __HAL_RCC_AHB3_RELEASE_RESET
+#define __APB1_FORCE_RESET __HAL_RCC_APB1_FORCE_RESET
+#define __APB1_RELEASE_RESET __HAL_RCC_APB1_RELEASE_RESET
+#define __APB2_FORCE_RESET __HAL_RCC_APB2_FORCE_RESET
+#define __APB2_RELEASE_RESET __HAL_RCC_APB2_RELEASE_RESET
+#define __BKP_CLK_DISABLE __HAL_RCC_BKP_CLK_DISABLE
+#define __BKP_CLK_ENABLE __HAL_RCC_BKP_CLK_ENABLE
+#define __BKP_FORCE_RESET __HAL_RCC_BKP_FORCE_RESET
+#define __BKP_RELEASE_RESET __HAL_RCC_BKP_RELEASE_RESET
+#define __CAN1_CLK_DISABLE __HAL_RCC_CAN1_CLK_DISABLE
+#define __CAN1_CLK_ENABLE __HAL_RCC_CAN1_CLK_ENABLE
+#define __CAN1_CLK_SLEEP_DISABLE __HAL_RCC_CAN1_CLK_SLEEP_DISABLE
+#define __CAN1_CLK_SLEEP_ENABLE __HAL_RCC_CAN1_CLK_SLEEP_ENABLE
+#define __CAN1_FORCE_RESET __HAL_RCC_CAN1_FORCE_RESET
+#define __CAN1_RELEASE_RESET __HAL_RCC_CAN1_RELEASE_RESET
+#define __CAN_CLK_DISABLE __HAL_RCC_CAN1_CLK_DISABLE
+#define __CAN_CLK_ENABLE __HAL_RCC_CAN1_CLK_ENABLE
+#define __CAN_FORCE_RESET __HAL_RCC_CAN1_FORCE_RESET
+#define __CAN_RELEASE_RESET __HAL_RCC_CAN1_RELEASE_RESET
+#define __CAN2_CLK_DISABLE __HAL_RCC_CAN2_CLK_DISABLE
+#define __CAN2_CLK_ENABLE __HAL_RCC_CAN2_CLK_ENABLE
+#define __CAN2_FORCE_RESET __HAL_RCC_CAN2_FORCE_RESET
+#define __CAN2_RELEASE_RESET __HAL_RCC_CAN2_RELEASE_RESET
+#define __CEC_CLK_DISABLE __HAL_RCC_CEC_CLK_DISABLE
+#define __CEC_CLK_ENABLE __HAL_RCC_CEC_CLK_ENABLE
+#define __COMP_CLK_DISABLE __HAL_RCC_COMP_CLK_DISABLE
+#define __COMP_CLK_ENABLE __HAL_RCC_COMP_CLK_ENABLE
+#define __COMP_FORCE_RESET __HAL_RCC_COMP_FORCE_RESET
+#define __COMP_RELEASE_RESET __HAL_RCC_COMP_RELEASE_RESET
+#define __COMP_CLK_SLEEP_ENABLE __HAL_RCC_COMP_CLK_SLEEP_ENABLE
+#define __COMP_CLK_SLEEP_DISABLE __HAL_RCC_COMP_CLK_SLEEP_DISABLE
+#define __CEC_FORCE_RESET __HAL_RCC_CEC_FORCE_RESET
+#define __CEC_RELEASE_RESET __HAL_RCC_CEC_RELEASE_RESET
+#define __CRC_CLK_DISABLE __HAL_RCC_CRC_CLK_DISABLE
+#define __CRC_CLK_ENABLE __HAL_RCC_CRC_CLK_ENABLE
+#define __CRC_CLK_SLEEP_DISABLE __HAL_RCC_CRC_CLK_SLEEP_DISABLE
+#define __CRC_CLK_SLEEP_ENABLE __HAL_RCC_CRC_CLK_SLEEP_ENABLE
+#define __CRC_FORCE_RESET __HAL_RCC_CRC_FORCE_RESET
+#define __CRC_RELEASE_RESET __HAL_RCC_CRC_RELEASE_RESET
+#define __DAC_CLK_DISABLE __HAL_RCC_DAC_CLK_DISABLE
+#define __DAC_CLK_ENABLE __HAL_RCC_DAC_CLK_ENABLE
+#define __DAC_FORCE_RESET __HAL_RCC_DAC_FORCE_RESET
+#define __DAC_RELEASE_RESET __HAL_RCC_DAC_RELEASE_RESET
+#define __DAC1_CLK_DISABLE __HAL_RCC_DAC1_CLK_DISABLE
+#define __DAC1_CLK_ENABLE __HAL_RCC_DAC1_CLK_ENABLE
+#define __DAC1_CLK_SLEEP_DISABLE __HAL_RCC_DAC1_CLK_SLEEP_DISABLE
+#define __DAC1_CLK_SLEEP_ENABLE __HAL_RCC_DAC1_CLK_SLEEP_ENABLE
+#define __DAC1_FORCE_RESET __HAL_RCC_DAC1_FORCE_RESET
+#define __DAC1_RELEASE_RESET __HAL_RCC_DAC1_RELEASE_RESET
+#define __DBGMCU_CLK_ENABLE __HAL_RCC_DBGMCU_CLK_ENABLE
+#define __DBGMCU_CLK_DISABLE __HAL_RCC_DBGMCU_CLK_DISABLE
+#define __DBGMCU_FORCE_RESET __HAL_RCC_DBGMCU_FORCE_RESET
+#define __DBGMCU_RELEASE_RESET __HAL_RCC_DBGMCU_RELEASE_RESET
+#define __DFSDM_CLK_DISABLE __HAL_RCC_DFSDM_CLK_DISABLE
+#define __DFSDM_CLK_ENABLE __HAL_RCC_DFSDM_CLK_ENABLE
+#define __DFSDM_CLK_SLEEP_DISABLE __HAL_RCC_DFSDM_CLK_SLEEP_DISABLE
+#define __DFSDM_CLK_SLEEP_ENABLE __HAL_RCC_DFSDM_CLK_SLEEP_ENABLE
+#define __DFSDM_FORCE_RESET __HAL_RCC_DFSDM_FORCE_RESET
+#define __DFSDM_RELEASE_RESET __HAL_RCC_DFSDM_RELEASE_RESET
+#define __DMA1_CLK_DISABLE __HAL_RCC_DMA1_CLK_DISABLE
+#define __DMA1_CLK_ENABLE __HAL_RCC_DMA1_CLK_ENABLE
+#define __DMA1_CLK_SLEEP_DISABLE __HAL_RCC_DMA1_CLK_SLEEP_DISABLE
+#define __DMA1_CLK_SLEEP_ENABLE __HAL_RCC_DMA1_CLK_SLEEP_ENABLE
+#define __DMA1_FORCE_RESET __HAL_RCC_DMA1_FORCE_RESET
+#define __DMA1_RELEASE_RESET __HAL_RCC_DMA1_RELEASE_RESET
+#define __DMA2_CLK_DISABLE __HAL_RCC_DMA2_CLK_DISABLE
+#define __DMA2_CLK_ENABLE __HAL_RCC_DMA2_CLK_ENABLE
+#define __DMA2_CLK_SLEEP_DISABLE __HAL_RCC_DMA2_CLK_SLEEP_DISABLE
+#define __DMA2_CLK_SLEEP_ENABLE __HAL_RCC_DMA2_CLK_SLEEP_ENABLE
+#define __DMA2_FORCE_RESET __HAL_RCC_DMA2_FORCE_RESET
+#define __DMA2_RELEASE_RESET __HAL_RCC_DMA2_RELEASE_RESET
+#define __ETHMAC_CLK_DISABLE __HAL_RCC_ETHMAC_CLK_DISABLE
+#define __ETHMAC_CLK_ENABLE __HAL_RCC_ETHMAC_CLK_ENABLE
+#define __ETHMAC_FORCE_RESET __HAL_RCC_ETHMAC_FORCE_RESET
+#define __ETHMAC_RELEASE_RESET __HAL_RCC_ETHMAC_RELEASE_RESET
+#define __ETHMACRX_CLK_DISABLE __HAL_RCC_ETHMACRX_CLK_DISABLE
+#define __ETHMACRX_CLK_ENABLE __HAL_RCC_ETHMACRX_CLK_ENABLE
+#define __ETHMACTX_CLK_DISABLE __HAL_RCC_ETHMACTX_CLK_DISABLE
+#define __ETHMACTX_CLK_ENABLE __HAL_RCC_ETHMACTX_CLK_ENABLE
+#define __FIREWALL_CLK_DISABLE __HAL_RCC_FIREWALL_CLK_DISABLE
+#define __FIREWALL_CLK_ENABLE __HAL_RCC_FIREWALL_CLK_ENABLE
+#define __FLASH_CLK_DISABLE __HAL_RCC_FLASH_CLK_DISABLE
+#define __FLASH_CLK_ENABLE __HAL_RCC_FLASH_CLK_ENABLE
+#define __FLASH_CLK_SLEEP_DISABLE __HAL_RCC_FLASH_CLK_SLEEP_DISABLE
+#define __FLASH_CLK_SLEEP_ENABLE __HAL_RCC_FLASH_CLK_SLEEP_ENABLE
+#define __FLASH_FORCE_RESET __HAL_RCC_FLASH_FORCE_RESET
+#define __FLASH_RELEASE_RESET __HAL_RCC_FLASH_RELEASE_RESET
+#define __FLITF_CLK_DISABLE __HAL_RCC_FLITF_CLK_DISABLE
+#define __FLITF_CLK_ENABLE __HAL_RCC_FLITF_CLK_ENABLE
+#define __FLITF_FORCE_RESET __HAL_RCC_FLITF_FORCE_RESET
+#define __FLITF_RELEASE_RESET __HAL_RCC_FLITF_RELEASE_RESET
+#define __FLITF_CLK_SLEEP_ENABLE __HAL_RCC_FLITF_CLK_SLEEP_ENABLE
+#define __FLITF_CLK_SLEEP_DISABLE __HAL_RCC_FLITF_CLK_SLEEP_DISABLE
+#define __FMC_CLK_DISABLE __HAL_RCC_FMC_CLK_DISABLE
+#define __FMC_CLK_ENABLE __HAL_RCC_FMC_CLK_ENABLE
+#define __FMC_CLK_SLEEP_DISABLE __HAL_RCC_FMC_CLK_SLEEP_DISABLE
+#define __FMC_CLK_SLEEP_ENABLE __HAL_RCC_FMC_CLK_SLEEP_ENABLE
+#define __FMC_FORCE_RESET __HAL_RCC_FMC_FORCE_RESET
+#define __FMC_RELEASE_RESET __HAL_RCC_FMC_RELEASE_RESET
+#define __FSMC_CLK_DISABLE __HAL_RCC_FSMC_CLK_DISABLE
+#define __FSMC_CLK_ENABLE __HAL_RCC_FSMC_CLK_ENABLE
+#define __GPIOA_CLK_DISABLE __HAL_RCC_GPIOA_CLK_DISABLE
+#define __GPIOA_CLK_ENABLE __HAL_RCC_GPIOA_CLK_ENABLE
+#define __GPIOA_CLK_SLEEP_DISABLE __HAL_RCC_GPIOA_CLK_SLEEP_DISABLE
+#define __GPIOA_CLK_SLEEP_ENABLE __HAL_RCC_GPIOA_CLK_SLEEP_ENABLE
+#define __GPIOA_FORCE_RESET __HAL_RCC_GPIOA_FORCE_RESET
+#define __GPIOA_RELEASE_RESET __HAL_RCC_GPIOA_RELEASE_RESET
+#define __GPIOB_CLK_DISABLE __HAL_RCC_GPIOB_CLK_DISABLE
+#define __GPIOB_CLK_ENABLE __HAL_RCC_GPIOB_CLK_ENABLE
+#define __GPIOB_CLK_SLEEP_DISABLE __HAL_RCC_GPIOB_CLK_SLEEP_DISABLE
+#define __GPIOB_CLK_SLEEP_ENABLE __HAL_RCC_GPIOB_CLK_SLEEP_ENABLE
+#define __GPIOB_FORCE_RESET __HAL_RCC_GPIOB_FORCE_RESET
+#define __GPIOB_RELEASE_RESET __HAL_RCC_GPIOB_RELEASE_RESET
+#define __GPIOC_CLK_DISABLE __HAL_RCC_GPIOC_CLK_DISABLE
+#define __GPIOC_CLK_ENABLE __HAL_RCC_GPIOC_CLK_ENABLE
+#define __GPIOC_CLK_SLEEP_DISABLE __HAL_RCC_GPIOC_CLK_SLEEP_DISABLE
+#define __GPIOC_CLK_SLEEP_ENABLE __HAL_RCC_GPIOC_CLK_SLEEP_ENABLE
+#define __GPIOC_FORCE_RESET __HAL_RCC_GPIOC_FORCE_RESET
+#define __GPIOC_RELEASE_RESET __HAL_RCC_GPIOC_RELEASE_RESET
+#define __GPIOD_CLK_DISABLE __HAL_RCC_GPIOD_CLK_DISABLE
+#define __GPIOD_CLK_ENABLE __HAL_RCC_GPIOD_CLK_ENABLE
+#define __GPIOD_CLK_SLEEP_DISABLE __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE
+#define __GPIOD_CLK_SLEEP_ENABLE __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE
+#define __GPIOD_FORCE_RESET __HAL_RCC_GPIOD_FORCE_RESET
+#define __GPIOD_RELEASE_RESET __HAL_RCC_GPIOD_RELEASE_RESET
+#define __GPIOE_CLK_DISABLE __HAL_RCC_GPIOE_CLK_DISABLE
+#define __GPIOE_CLK_ENABLE __HAL_RCC_GPIOE_CLK_ENABLE
+#define __GPIOE_CLK_SLEEP_DISABLE __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE
+#define __GPIOE_CLK_SLEEP_ENABLE __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE
+#define __GPIOE_FORCE_RESET __HAL_RCC_GPIOE_FORCE_RESET
+#define __GPIOE_RELEASE_RESET __HAL_RCC_GPIOE_RELEASE_RESET
+#define __GPIOF_CLK_DISABLE __HAL_RCC_GPIOF_CLK_DISABLE
+#define __GPIOF_CLK_ENABLE __HAL_RCC_GPIOF_CLK_ENABLE
+#define __GPIOF_CLK_SLEEP_DISABLE __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE
+#define __GPIOF_CLK_SLEEP_ENABLE __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE
+#define __GPIOF_FORCE_RESET __HAL_RCC_GPIOF_FORCE_RESET
+#define __GPIOF_RELEASE_RESET __HAL_RCC_GPIOF_RELEASE_RESET
+#define __GPIOG_CLK_DISABLE __HAL_RCC_GPIOG_CLK_DISABLE
+#define __GPIOG_CLK_ENABLE __HAL_RCC_GPIOG_CLK_ENABLE
+#define __GPIOG_CLK_SLEEP_DISABLE __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE
+#define __GPIOG_CLK_SLEEP_ENABLE __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE
+#define __GPIOG_FORCE_RESET __HAL_RCC_GPIOG_FORCE_RESET
+#define __GPIOG_RELEASE_RESET __HAL_RCC_GPIOG_RELEASE_RESET
+#define __GPIOH_CLK_DISABLE __HAL_RCC_GPIOH_CLK_DISABLE
+#define __GPIOH_CLK_ENABLE __HAL_RCC_GPIOH_CLK_ENABLE
+#define __GPIOH_CLK_SLEEP_DISABLE __HAL_RCC_GPIOH_CLK_SLEEP_DISABLE
+#define __GPIOH_CLK_SLEEP_ENABLE __HAL_RCC_GPIOH_CLK_SLEEP_ENABLE
+#define __GPIOH_FORCE_RESET __HAL_RCC_GPIOH_FORCE_RESET
+#define __GPIOH_RELEASE_RESET __HAL_RCC_GPIOH_RELEASE_RESET
+#define __I2C1_CLK_DISABLE __HAL_RCC_I2C1_CLK_DISABLE
+#define __I2C1_CLK_ENABLE __HAL_RCC_I2C1_CLK_ENABLE
+#define __I2C1_CLK_SLEEP_DISABLE __HAL_RCC_I2C1_CLK_SLEEP_DISABLE
+#define __I2C1_CLK_SLEEP_ENABLE __HAL_RCC_I2C1_CLK_SLEEP_ENABLE
+#define __I2C1_FORCE_RESET __HAL_RCC_I2C1_FORCE_RESET
+#define __I2C1_RELEASE_RESET __HAL_RCC_I2C1_RELEASE_RESET
+#define __I2C2_CLK_DISABLE __HAL_RCC_I2C2_CLK_DISABLE
+#define __I2C2_CLK_ENABLE __HAL_RCC_I2C2_CLK_ENABLE
+#define __I2C2_CLK_SLEEP_DISABLE __HAL_RCC_I2C2_CLK_SLEEP_DISABLE
+#define __I2C2_CLK_SLEEP_ENABLE __HAL_RCC_I2C2_CLK_SLEEP_ENABLE
+#define __I2C2_FORCE_RESET __HAL_RCC_I2C2_FORCE_RESET
+#define __I2C2_RELEASE_RESET __HAL_RCC_I2C2_RELEASE_RESET
+#define __I2C3_CLK_DISABLE __HAL_RCC_I2C3_CLK_DISABLE
+#define __I2C3_CLK_ENABLE __HAL_RCC_I2C3_CLK_ENABLE
+#define __I2C3_CLK_SLEEP_DISABLE __HAL_RCC_I2C3_CLK_SLEEP_DISABLE
+#define __I2C3_CLK_SLEEP_ENABLE __HAL_RCC_I2C3_CLK_SLEEP_ENABLE
+#define __I2C3_FORCE_RESET __HAL_RCC_I2C3_FORCE_RESET
+#define __I2C3_RELEASE_RESET __HAL_RCC_I2C3_RELEASE_RESET
+#define __LCD_CLK_DISABLE __HAL_RCC_LCD_CLK_DISABLE
+#define __LCD_CLK_ENABLE __HAL_RCC_LCD_CLK_ENABLE
+#define __LCD_CLK_SLEEP_DISABLE __HAL_RCC_LCD_CLK_SLEEP_DISABLE
+#define __LCD_CLK_SLEEP_ENABLE __HAL_RCC_LCD_CLK_SLEEP_ENABLE
+#define __LCD_FORCE_RESET __HAL_RCC_LCD_FORCE_RESET
+#define __LCD_RELEASE_RESET __HAL_RCC_LCD_RELEASE_RESET
+#define __LPTIM1_CLK_DISABLE __HAL_RCC_LPTIM1_CLK_DISABLE
+#define __LPTIM1_CLK_ENABLE __HAL_RCC_LPTIM1_CLK_ENABLE
+#define __LPTIM1_CLK_SLEEP_DISABLE __HAL_RCC_LPTIM1_CLK_SLEEP_DISABLE
+#define __LPTIM1_CLK_SLEEP_ENABLE __HAL_RCC_LPTIM1_CLK_SLEEP_ENABLE
+#define __LPTIM1_FORCE_RESET __HAL_RCC_LPTIM1_FORCE_RESET
+#define __LPTIM1_RELEASE_RESET __HAL_RCC_LPTIM1_RELEASE_RESET
+#define __LPTIM2_CLK_DISABLE __HAL_RCC_LPTIM2_CLK_DISABLE
+#define __LPTIM2_CLK_ENABLE __HAL_RCC_LPTIM2_CLK_ENABLE
+#define __LPTIM2_CLK_SLEEP_DISABLE __HAL_RCC_LPTIM2_CLK_SLEEP_DISABLE
+#define __LPTIM2_CLK_SLEEP_ENABLE __HAL_RCC_LPTIM2_CLK_SLEEP_ENABLE
+#define __LPTIM2_FORCE_RESET __HAL_RCC_LPTIM2_FORCE_RESET
+#define __LPTIM2_RELEASE_RESET __HAL_RCC_LPTIM2_RELEASE_RESET
+#define __LPUART1_CLK_DISABLE __HAL_RCC_LPUART1_CLK_DISABLE
+#define __LPUART1_CLK_ENABLE __HAL_RCC_LPUART1_CLK_ENABLE
+#define __LPUART1_CLK_SLEEP_DISABLE __HAL_RCC_LPUART1_CLK_SLEEP_DISABLE
+#define __LPUART1_CLK_SLEEP_ENABLE __HAL_RCC_LPUART1_CLK_SLEEP_ENABLE
+#define __LPUART1_FORCE_RESET __HAL_RCC_LPUART1_FORCE_RESET
+#define __LPUART1_RELEASE_RESET __HAL_RCC_LPUART1_RELEASE_RESET
+#define __OPAMP_CLK_DISABLE __HAL_RCC_OPAMP_CLK_DISABLE
+#define __OPAMP_CLK_ENABLE __HAL_RCC_OPAMP_CLK_ENABLE
+#define __OPAMP_CLK_SLEEP_DISABLE __HAL_RCC_OPAMP_CLK_SLEEP_DISABLE
+#define __OPAMP_CLK_SLEEP_ENABLE __HAL_RCC_OPAMP_CLK_SLEEP_ENABLE
+#define __OPAMP_FORCE_RESET __HAL_RCC_OPAMP_FORCE_RESET
+#define __OPAMP_RELEASE_RESET __HAL_RCC_OPAMP_RELEASE_RESET
+#define __OTGFS_CLK_DISABLE __HAL_RCC_OTGFS_CLK_DISABLE
+#define __OTGFS_CLK_ENABLE __HAL_RCC_OTGFS_CLK_ENABLE
+#define __OTGFS_CLK_SLEEP_DISABLE __HAL_RCC_OTGFS_CLK_SLEEP_DISABLE
+#define __OTGFS_CLK_SLEEP_ENABLE __HAL_RCC_OTGFS_CLK_SLEEP_ENABLE
+#define __OTGFS_FORCE_RESET __HAL_RCC_OTGFS_FORCE_RESET
+#define __OTGFS_RELEASE_RESET __HAL_RCC_OTGFS_RELEASE_RESET
+#define __PWR_CLK_DISABLE __HAL_RCC_PWR_CLK_DISABLE
+#define __PWR_CLK_ENABLE __HAL_RCC_PWR_CLK_ENABLE
+#define __PWR_CLK_SLEEP_DISABLE __HAL_RCC_PWR_CLK_SLEEP_DISABLE
+#define __PWR_CLK_SLEEP_ENABLE __HAL_RCC_PWR_CLK_SLEEP_ENABLE
+#define __PWR_FORCE_RESET __HAL_RCC_PWR_FORCE_RESET
+#define __PWR_RELEASE_RESET __HAL_RCC_PWR_RELEASE_RESET
+#define __QSPI_CLK_DISABLE __HAL_RCC_QSPI_CLK_DISABLE
+#define __QSPI_CLK_ENABLE __HAL_RCC_QSPI_CLK_ENABLE
+#define __QSPI_CLK_SLEEP_DISABLE __HAL_RCC_QSPI_CLK_SLEEP_DISABLE
+#define __QSPI_CLK_SLEEP_ENABLE __HAL_RCC_QSPI_CLK_SLEEP_ENABLE
+#define __QSPI_FORCE_RESET __HAL_RCC_QSPI_FORCE_RESET
+#define __QSPI_RELEASE_RESET __HAL_RCC_QSPI_RELEASE_RESET
+
+#if defined(STM32WB)
+#define __HAL_RCC_QSPI_CLK_DISABLE __HAL_RCC_QUADSPI_CLK_DISABLE
+#define __HAL_RCC_QSPI_CLK_ENABLE __HAL_RCC_QUADSPI_CLK_ENABLE
+#define __HAL_RCC_QSPI_CLK_SLEEP_DISABLE __HAL_RCC_QUADSPI_CLK_SLEEP_DISABLE
+#define __HAL_RCC_QSPI_CLK_SLEEP_ENABLE __HAL_RCC_QUADSPI_CLK_SLEEP_ENABLE
+#define __HAL_RCC_QSPI_FORCE_RESET __HAL_RCC_QUADSPI_FORCE_RESET
+#define __HAL_RCC_QSPI_RELEASE_RESET __HAL_RCC_QUADSPI_RELEASE_RESET
+#define __HAL_RCC_QSPI_IS_CLK_ENABLED __HAL_RCC_QUADSPI_IS_CLK_ENABLED
+#define __HAL_RCC_QSPI_IS_CLK_DISABLED __HAL_RCC_QUADSPI_IS_CLK_DISABLED
+#define __HAL_RCC_QSPI_IS_CLK_SLEEP_ENABLED __HAL_RCC_QUADSPI_IS_CLK_SLEEP_ENABLED
+#define __HAL_RCC_QSPI_IS_CLK_SLEEP_DISABLED __HAL_RCC_QUADSPI_IS_CLK_SLEEP_DISABLED
+#define QSPI_IRQHandler QUADSPI_IRQHandler
+#endif /* __HAL_RCC_QUADSPI_CLK_ENABLE */
+
+#define __RNG_CLK_DISABLE __HAL_RCC_RNG_CLK_DISABLE
+#define __RNG_CLK_ENABLE __HAL_RCC_RNG_CLK_ENABLE
+#define __RNG_CLK_SLEEP_DISABLE __HAL_RCC_RNG_CLK_SLEEP_DISABLE
+#define __RNG_CLK_SLEEP_ENABLE __HAL_RCC_RNG_CLK_SLEEP_ENABLE
+#define __RNG_FORCE_RESET __HAL_RCC_RNG_FORCE_RESET
+#define __RNG_RELEASE_RESET __HAL_RCC_RNG_RELEASE_RESET
+#define __SAI1_CLK_DISABLE __HAL_RCC_SAI1_CLK_DISABLE
+#define __SAI1_CLK_ENABLE __HAL_RCC_SAI1_CLK_ENABLE
+#define __SAI1_CLK_SLEEP_DISABLE __HAL_RCC_SAI1_CLK_SLEEP_DISABLE
+#define __SAI1_CLK_SLEEP_ENABLE __HAL_RCC_SAI1_CLK_SLEEP_ENABLE
+#define __SAI1_FORCE_RESET __HAL_RCC_SAI1_FORCE_RESET
+#define __SAI1_RELEASE_RESET __HAL_RCC_SAI1_RELEASE_RESET
+#define __SAI2_CLK_DISABLE __HAL_RCC_SAI2_CLK_DISABLE
+#define __SAI2_CLK_ENABLE __HAL_RCC_SAI2_CLK_ENABLE
+#define __SAI2_CLK_SLEEP_DISABLE __HAL_RCC_SAI2_CLK_SLEEP_DISABLE
+#define __SAI2_CLK_SLEEP_ENABLE __HAL_RCC_SAI2_CLK_SLEEP_ENABLE
+#define __SAI2_FORCE_RESET __HAL_RCC_SAI2_FORCE_RESET
+#define __SAI2_RELEASE_RESET __HAL_RCC_SAI2_RELEASE_RESET
+#define __SDIO_CLK_DISABLE __HAL_RCC_SDIO_CLK_DISABLE
+#define __SDIO_CLK_ENABLE __HAL_RCC_SDIO_CLK_ENABLE
+#define __SDMMC_CLK_DISABLE __HAL_RCC_SDMMC_CLK_DISABLE
+#define __SDMMC_CLK_ENABLE __HAL_RCC_SDMMC_CLK_ENABLE
+#define __SDMMC_CLK_SLEEP_DISABLE __HAL_RCC_SDMMC_CLK_SLEEP_DISABLE
+#define __SDMMC_CLK_SLEEP_ENABLE __HAL_RCC_SDMMC_CLK_SLEEP_ENABLE
+#define __SDMMC_FORCE_RESET __HAL_RCC_SDMMC_FORCE_RESET
+#define __SDMMC_RELEASE_RESET __HAL_RCC_SDMMC_RELEASE_RESET
+#define __SPI1_CLK_DISABLE __HAL_RCC_SPI1_CLK_DISABLE
+#define __SPI1_CLK_ENABLE __HAL_RCC_SPI1_CLK_ENABLE
+#define __SPI1_CLK_SLEEP_DISABLE __HAL_RCC_SPI1_CLK_SLEEP_DISABLE
+#define __SPI1_CLK_SLEEP_ENABLE __HAL_RCC_SPI1_CLK_SLEEP_ENABLE
+#define __SPI1_FORCE_RESET __HAL_RCC_SPI1_FORCE_RESET
+#define __SPI1_RELEASE_RESET __HAL_RCC_SPI1_RELEASE_RESET
+#define __SPI2_CLK_DISABLE __HAL_RCC_SPI2_CLK_DISABLE
+#define __SPI2_CLK_ENABLE __HAL_RCC_SPI2_CLK_ENABLE
+#define __SPI2_CLK_SLEEP_DISABLE __HAL_RCC_SPI2_CLK_SLEEP_DISABLE
+#define __SPI2_CLK_SLEEP_ENABLE __HAL_RCC_SPI2_CLK_SLEEP_ENABLE
+#define __SPI2_FORCE_RESET __HAL_RCC_SPI2_FORCE_RESET
+#define __SPI2_RELEASE_RESET __HAL_RCC_SPI2_RELEASE_RESET
+#define __SPI3_CLK_DISABLE __HAL_RCC_SPI3_CLK_DISABLE
+#define __SPI3_CLK_ENABLE __HAL_RCC_SPI3_CLK_ENABLE
+#define __SPI3_CLK_SLEEP_DISABLE __HAL_RCC_SPI3_CLK_SLEEP_DISABLE
+#define __SPI3_CLK_SLEEP_ENABLE __HAL_RCC_SPI3_CLK_SLEEP_ENABLE
+#define __SPI3_FORCE_RESET __HAL_RCC_SPI3_FORCE_RESET
+#define __SPI3_RELEASE_RESET __HAL_RCC_SPI3_RELEASE_RESET
+#define __SRAM_CLK_DISABLE __HAL_RCC_SRAM_CLK_DISABLE
+#define __SRAM_CLK_ENABLE __HAL_RCC_SRAM_CLK_ENABLE
+#define __SRAM1_CLK_SLEEP_DISABLE __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE
+#define __SRAM1_CLK_SLEEP_ENABLE __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE
+#define __SRAM2_CLK_SLEEP_DISABLE __HAL_RCC_SRAM2_CLK_SLEEP_DISABLE
+#define __SRAM2_CLK_SLEEP_ENABLE __HAL_RCC_SRAM2_CLK_SLEEP_ENABLE
+#define __SWPMI1_CLK_DISABLE __HAL_RCC_SWPMI1_CLK_DISABLE
+#define __SWPMI1_CLK_ENABLE __HAL_RCC_SWPMI1_CLK_ENABLE
+#define __SWPMI1_CLK_SLEEP_DISABLE __HAL_RCC_SWPMI1_CLK_SLEEP_DISABLE
+#define __SWPMI1_CLK_SLEEP_ENABLE __HAL_RCC_SWPMI1_CLK_SLEEP_ENABLE
+#define __SWPMI1_FORCE_RESET __HAL_RCC_SWPMI1_FORCE_RESET
+#define __SWPMI1_RELEASE_RESET __HAL_RCC_SWPMI1_RELEASE_RESET
+#define __SYSCFG_CLK_DISABLE __HAL_RCC_SYSCFG_CLK_DISABLE
+#define __SYSCFG_CLK_ENABLE __HAL_RCC_SYSCFG_CLK_ENABLE
+#define __SYSCFG_CLK_SLEEP_DISABLE __HAL_RCC_SYSCFG_CLK_SLEEP_DISABLE
+#define __SYSCFG_CLK_SLEEP_ENABLE __HAL_RCC_SYSCFG_CLK_SLEEP_ENABLE
+#define __SYSCFG_FORCE_RESET __HAL_RCC_SYSCFG_FORCE_RESET
+#define __SYSCFG_RELEASE_RESET __HAL_RCC_SYSCFG_RELEASE_RESET
+#define __TIM1_CLK_DISABLE __HAL_RCC_TIM1_CLK_DISABLE
+#define __TIM1_CLK_ENABLE __HAL_RCC_TIM1_CLK_ENABLE
+#define __TIM1_CLK_SLEEP_DISABLE __HAL_RCC_TIM1_CLK_SLEEP_DISABLE
+#define __TIM1_CLK_SLEEP_ENABLE __HAL_RCC_TIM1_CLK_SLEEP_ENABLE
+#define __TIM1_FORCE_RESET __HAL_RCC_TIM1_FORCE_RESET
+#define __TIM1_RELEASE_RESET __HAL_RCC_TIM1_RELEASE_RESET
+#define __TIM10_CLK_DISABLE __HAL_RCC_TIM10_CLK_DISABLE
+#define __TIM10_CLK_ENABLE __HAL_RCC_TIM10_CLK_ENABLE
+#define __TIM10_FORCE_RESET __HAL_RCC_TIM10_FORCE_RESET
+#define __TIM10_RELEASE_RESET __HAL_RCC_TIM10_RELEASE_RESET
+#define __TIM11_CLK_DISABLE __HAL_RCC_TIM11_CLK_DISABLE
+#define __TIM11_CLK_ENABLE __HAL_RCC_TIM11_CLK_ENABLE
+#define __TIM11_FORCE_RESET __HAL_RCC_TIM11_FORCE_RESET
+#define __TIM11_RELEASE_RESET __HAL_RCC_TIM11_RELEASE_RESET
+#define __TIM12_CLK_DISABLE __HAL_RCC_TIM12_CLK_DISABLE
+#define __TIM12_CLK_ENABLE __HAL_RCC_TIM12_CLK_ENABLE
+#define __TIM12_FORCE_RESET __HAL_RCC_TIM12_FORCE_RESET
+#define __TIM12_RELEASE_RESET __HAL_RCC_TIM12_RELEASE_RESET
+#define __TIM13_CLK_DISABLE __HAL_RCC_TIM13_CLK_DISABLE
+#define __TIM13_CLK_ENABLE __HAL_RCC_TIM13_CLK_ENABLE
+#define __TIM13_FORCE_RESET __HAL_RCC_TIM13_FORCE_RESET
+#define __TIM13_RELEASE_RESET __HAL_RCC_TIM13_RELEASE_RESET
+#define __TIM14_CLK_DISABLE __HAL_RCC_TIM14_CLK_DISABLE
+#define __TIM14_CLK_ENABLE __HAL_RCC_TIM14_CLK_ENABLE
+#define __TIM14_FORCE_RESET __HAL_RCC_TIM14_FORCE_RESET
+#define __TIM14_RELEASE_RESET __HAL_RCC_TIM14_RELEASE_RESET
+#define __TIM15_CLK_DISABLE __HAL_RCC_TIM15_CLK_DISABLE
+#define __TIM15_CLK_ENABLE __HAL_RCC_TIM15_CLK_ENABLE
+#define __TIM15_CLK_SLEEP_DISABLE __HAL_RCC_TIM15_CLK_SLEEP_DISABLE
+#define __TIM15_CLK_SLEEP_ENABLE __HAL_RCC_TIM15_CLK_SLEEP_ENABLE
+#define __TIM15_FORCE_RESET __HAL_RCC_TIM15_FORCE_RESET
+#define __TIM15_RELEASE_RESET __HAL_RCC_TIM15_RELEASE_RESET
+#define __TIM16_CLK_DISABLE __HAL_RCC_TIM16_CLK_DISABLE
+#define __TIM16_CLK_ENABLE __HAL_RCC_TIM16_CLK_ENABLE
+#define __TIM16_CLK_SLEEP_DISABLE __HAL_RCC_TIM16_CLK_SLEEP_DISABLE
+#define __TIM16_CLK_SLEEP_ENABLE __HAL_RCC_TIM16_CLK_SLEEP_ENABLE
+#define __TIM16_FORCE_RESET __HAL_RCC_TIM16_FORCE_RESET
+#define __TIM16_RELEASE_RESET __HAL_RCC_TIM16_RELEASE_RESET
+#define __TIM17_CLK_DISABLE __HAL_RCC_TIM17_CLK_DISABLE
+#define __TIM17_CLK_ENABLE __HAL_RCC_TIM17_CLK_ENABLE
+#define __TIM17_CLK_SLEEP_DISABLE __HAL_RCC_TIM17_CLK_SLEEP_DISABLE
+#define __TIM17_CLK_SLEEP_ENABLE __HAL_RCC_TIM17_CLK_SLEEP_ENABLE
+#define __TIM17_FORCE_RESET __HAL_RCC_TIM17_FORCE_RESET
+#define __TIM17_RELEASE_RESET __HAL_RCC_TIM17_RELEASE_RESET
+#define __TIM2_CLK_DISABLE __HAL_RCC_TIM2_CLK_DISABLE
+#define __TIM2_CLK_ENABLE __HAL_RCC_TIM2_CLK_ENABLE
+#define __TIM2_CLK_SLEEP_DISABLE __HAL_RCC_TIM2_CLK_SLEEP_DISABLE
+#define __TIM2_CLK_SLEEP_ENABLE __HAL_RCC_TIM2_CLK_SLEEP_ENABLE
+#define __TIM2_FORCE_RESET __HAL_RCC_TIM2_FORCE_RESET
+#define __TIM2_RELEASE_RESET __HAL_RCC_TIM2_RELEASE_RESET
+#define __TIM3_CLK_DISABLE __HAL_RCC_TIM3_CLK_DISABLE
+#define __TIM3_CLK_ENABLE __HAL_RCC_TIM3_CLK_ENABLE
+#define __TIM3_CLK_SLEEP_DISABLE __HAL_RCC_TIM3_CLK_SLEEP_DISABLE
+#define __TIM3_CLK_SLEEP_ENABLE __HAL_RCC_TIM3_CLK_SLEEP_ENABLE
+#define __TIM3_FORCE_RESET __HAL_RCC_TIM3_FORCE_RESET
+#define __TIM3_RELEASE_RESET __HAL_RCC_TIM3_RELEASE_RESET
+#define __TIM4_CLK_DISABLE __HAL_RCC_TIM4_CLK_DISABLE
+#define __TIM4_CLK_ENABLE __HAL_RCC_TIM4_CLK_ENABLE
+#define __TIM4_CLK_SLEEP_DISABLE __HAL_RCC_TIM4_CLK_SLEEP_DISABLE
+#define __TIM4_CLK_SLEEP_ENABLE __HAL_RCC_TIM4_CLK_SLEEP_ENABLE
+#define __TIM4_FORCE_RESET __HAL_RCC_TIM4_FORCE_RESET
+#define __TIM4_RELEASE_RESET __HAL_RCC_TIM4_RELEASE_RESET
+#define __TIM5_CLK_DISABLE __HAL_RCC_TIM5_CLK_DISABLE
+#define __TIM5_CLK_ENABLE __HAL_RCC_TIM5_CLK_ENABLE
+#define __TIM5_CLK_SLEEP_DISABLE __HAL_RCC_TIM5_CLK_SLEEP_DISABLE
+#define __TIM5_CLK_SLEEP_ENABLE __HAL_RCC_TIM5_CLK_SLEEP_ENABLE
+#define __TIM5_FORCE_RESET __HAL_RCC_TIM5_FORCE_RESET
+#define __TIM5_RELEASE_RESET __HAL_RCC_TIM5_RELEASE_RESET
+#define __TIM6_CLK_DISABLE __HAL_RCC_TIM6_CLK_DISABLE
+#define __TIM6_CLK_ENABLE __HAL_RCC_TIM6_CLK_ENABLE
+#define __TIM6_CLK_SLEEP_DISABLE __HAL_RCC_TIM6_CLK_SLEEP_DISABLE
+#define __TIM6_CLK_SLEEP_ENABLE __HAL_RCC_TIM6_CLK_SLEEP_ENABLE
+#define __TIM6_FORCE_RESET __HAL_RCC_TIM6_FORCE_RESET
+#define __TIM6_RELEASE_RESET __HAL_RCC_TIM6_RELEASE_RESET
+#define __TIM7_CLK_DISABLE __HAL_RCC_TIM7_CLK_DISABLE
+#define __TIM7_CLK_ENABLE __HAL_RCC_TIM7_CLK_ENABLE
+#define __TIM7_CLK_SLEEP_DISABLE __HAL_RCC_TIM7_CLK_SLEEP_DISABLE
+#define __TIM7_CLK_SLEEP_ENABLE __HAL_RCC_TIM7_CLK_SLEEP_ENABLE
+#define __TIM7_FORCE_RESET __HAL_RCC_TIM7_FORCE_RESET
+#define __TIM7_RELEASE_RESET __HAL_RCC_TIM7_RELEASE_RESET
+#define __TIM8_CLK_DISABLE __HAL_RCC_TIM8_CLK_DISABLE
+#define __TIM8_CLK_ENABLE __HAL_RCC_TIM8_CLK_ENABLE
+#define __TIM8_CLK_SLEEP_DISABLE __HAL_RCC_TIM8_CLK_SLEEP_DISABLE
+#define __TIM8_CLK_SLEEP_ENABLE __HAL_RCC_TIM8_CLK_SLEEP_ENABLE
+#define __TIM8_FORCE_RESET __HAL_RCC_TIM8_FORCE_RESET
+#define __TIM8_RELEASE_RESET __HAL_RCC_TIM8_RELEASE_RESET
+#define __TIM9_CLK_DISABLE __HAL_RCC_TIM9_CLK_DISABLE
+#define __TIM9_CLK_ENABLE __HAL_RCC_TIM9_CLK_ENABLE
+#define __TIM9_FORCE_RESET __HAL_RCC_TIM9_FORCE_RESET
+#define __TIM9_RELEASE_RESET __HAL_RCC_TIM9_RELEASE_RESET
+#define __TSC_CLK_DISABLE __HAL_RCC_TSC_CLK_DISABLE
+#define __TSC_CLK_ENABLE __HAL_RCC_TSC_CLK_ENABLE
+#define __TSC_CLK_SLEEP_DISABLE __HAL_RCC_TSC_CLK_SLEEP_DISABLE
+#define __TSC_CLK_SLEEP_ENABLE __HAL_RCC_TSC_CLK_SLEEP_ENABLE
+#define __TSC_FORCE_RESET __HAL_RCC_TSC_FORCE_RESET
+#define __TSC_RELEASE_RESET __HAL_RCC_TSC_RELEASE_RESET
+#define __UART4_CLK_DISABLE __HAL_RCC_UART4_CLK_DISABLE
+#define __UART4_CLK_ENABLE __HAL_RCC_UART4_CLK_ENABLE
+#define __UART4_CLK_SLEEP_DISABLE __HAL_RCC_UART4_CLK_SLEEP_DISABLE
+#define __UART4_CLK_SLEEP_ENABLE __HAL_RCC_UART4_CLK_SLEEP_ENABLE
+#define __UART4_FORCE_RESET __HAL_RCC_UART4_FORCE_RESET
+#define __UART4_RELEASE_RESET __HAL_RCC_UART4_RELEASE_RESET
+#define __UART5_CLK_DISABLE __HAL_RCC_UART5_CLK_DISABLE
+#define __UART5_CLK_ENABLE __HAL_RCC_UART5_CLK_ENABLE
+#define __UART5_CLK_SLEEP_DISABLE __HAL_RCC_UART5_CLK_SLEEP_DISABLE
+#define __UART5_CLK_SLEEP_ENABLE __HAL_RCC_UART5_CLK_SLEEP_ENABLE
+#define __UART5_FORCE_RESET __HAL_RCC_UART5_FORCE_RESET
+#define __UART5_RELEASE_RESET __HAL_RCC_UART5_RELEASE_RESET
+#define __USART1_CLK_DISABLE __HAL_RCC_USART1_CLK_DISABLE
+#define __USART1_CLK_ENABLE __HAL_RCC_USART1_CLK_ENABLE
+#define __USART1_CLK_SLEEP_DISABLE __HAL_RCC_USART1_CLK_SLEEP_DISABLE
+#define __USART1_CLK_SLEEP_ENABLE __HAL_RCC_USART1_CLK_SLEEP_ENABLE
+#define __USART1_FORCE_RESET __HAL_RCC_USART1_FORCE_RESET
+#define __USART1_RELEASE_RESET __HAL_RCC_USART1_RELEASE_RESET
+#define __USART2_CLK_DISABLE __HAL_RCC_USART2_CLK_DISABLE
+#define __USART2_CLK_ENABLE __HAL_RCC_USART2_CLK_ENABLE
+#define __USART2_CLK_SLEEP_DISABLE __HAL_RCC_USART2_CLK_SLEEP_DISABLE
+#define __USART2_CLK_SLEEP_ENABLE __HAL_RCC_USART2_CLK_SLEEP_ENABLE
+#define __USART2_FORCE_RESET __HAL_RCC_USART2_FORCE_RESET
+#define __USART2_RELEASE_RESET __HAL_RCC_USART2_RELEASE_RESET
+#define __USART3_CLK_DISABLE __HAL_RCC_USART3_CLK_DISABLE
+#define __USART3_CLK_ENABLE __HAL_RCC_USART3_CLK_ENABLE
+#define __USART3_CLK_SLEEP_DISABLE __HAL_RCC_USART3_CLK_SLEEP_DISABLE
+#define __USART3_CLK_SLEEP_ENABLE __HAL_RCC_USART3_CLK_SLEEP_ENABLE
+#define __USART3_FORCE_RESET __HAL_RCC_USART3_FORCE_RESET
+#define __USART3_RELEASE_RESET __HAL_RCC_USART3_RELEASE_RESET
+#define __USART4_CLK_DISABLE __HAL_RCC_UART4_CLK_DISABLE
+#define __USART4_CLK_ENABLE __HAL_RCC_UART4_CLK_ENABLE
+#define __USART4_CLK_SLEEP_ENABLE __HAL_RCC_UART4_CLK_SLEEP_ENABLE
+#define __USART4_CLK_SLEEP_DISABLE __HAL_RCC_UART4_CLK_SLEEP_DISABLE
+#define __USART4_FORCE_RESET __HAL_RCC_UART4_FORCE_RESET
+#define __USART4_RELEASE_RESET __HAL_RCC_UART4_RELEASE_RESET
+#define __USART5_CLK_DISABLE __HAL_RCC_UART5_CLK_DISABLE
+#define __USART5_CLK_ENABLE __HAL_RCC_UART5_CLK_ENABLE
+#define __USART5_CLK_SLEEP_ENABLE __HAL_RCC_UART5_CLK_SLEEP_ENABLE
+#define __USART5_CLK_SLEEP_DISABLE __HAL_RCC_UART5_CLK_SLEEP_DISABLE
+#define __USART5_FORCE_RESET __HAL_RCC_UART5_FORCE_RESET
+#define __USART5_RELEASE_RESET __HAL_RCC_UART5_RELEASE_RESET
+#define __USART7_CLK_DISABLE __HAL_RCC_UART7_CLK_DISABLE
+#define __USART7_CLK_ENABLE __HAL_RCC_UART7_CLK_ENABLE
+#define __USART7_FORCE_RESET __HAL_RCC_UART7_FORCE_RESET
+#define __USART7_RELEASE_RESET __HAL_RCC_UART7_RELEASE_RESET
+#define __USART8_CLK_DISABLE __HAL_RCC_UART8_CLK_DISABLE
+#define __USART8_CLK_ENABLE __HAL_RCC_UART8_CLK_ENABLE
+#define __USART8_FORCE_RESET __HAL_RCC_UART8_FORCE_RESET
+#define __USART8_RELEASE_RESET __HAL_RCC_UART8_RELEASE_RESET
+#define __USB_CLK_DISABLE __HAL_RCC_USB_CLK_DISABLE
+#define __USB_CLK_ENABLE __HAL_RCC_USB_CLK_ENABLE
+#define __USB_FORCE_RESET __HAL_RCC_USB_FORCE_RESET
+#define __USB_CLK_SLEEP_ENABLE __HAL_RCC_USB_CLK_SLEEP_ENABLE
+#define __USB_CLK_SLEEP_DISABLE __HAL_RCC_USB_CLK_SLEEP_DISABLE
+#define __USB_OTG_FS_CLK_DISABLE __HAL_RCC_USB_OTG_FS_CLK_DISABLE
+#define __USB_OTG_FS_CLK_ENABLE __HAL_RCC_USB_OTG_FS_CLK_ENABLE
+#define __USB_RELEASE_RESET __HAL_RCC_USB_RELEASE_RESET
+
+#if defined(STM32H7)
+#define __HAL_RCC_WWDG_CLK_DISABLE __HAL_RCC_WWDG1_CLK_DISABLE
+#define __HAL_RCC_WWDG_CLK_ENABLE __HAL_RCC_WWDG1_CLK_ENABLE
+#define __HAL_RCC_WWDG_CLK_SLEEP_DISABLE __HAL_RCC_WWDG1_CLK_SLEEP_DISABLE
+#define __HAL_RCC_WWDG_CLK_SLEEP_ENABLE __HAL_RCC_WWDG1_CLK_SLEEP_ENABLE
+
+#define __HAL_RCC_WWDG_FORCE_RESET ((void)0U) /* Not available on the STM32H7*/
+#define __HAL_RCC_WWDG_RELEASE_RESET ((void)0U) /* Not available on the STM32H7*/
+
+
+#define __HAL_RCC_WWDG_IS_CLK_ENABLED __HAL_RCC_WWDG1_IS_CLK_ENABLED
+#define __HAL_RCC_WWDG_IS_CLK_DISABLED __HAL_RCC_WWDG1_IS_CLK_DISABLED
+#endif
+
+#define __WWDG_CLK_DISABLE __HAL_RCC_WWDG_CLK_DISABLE
+#define __WWDG_CLK_ENABLE __HAL_RCC_WWDG_CLK_ENABLE
+#define __WWDG_CLK_SLEEP_DISABLE __HAL_RCC_WWDG_CLK_SLEEP_DISABLE
+#define __WWDG_CLK_SLEEP_ENABLE __HAL_RCC_WWDG_CLK_SLEEP_ENABLE
+#define __WWDG_FORCE_RESET __HAL_RCC_WWDG_FORCE_RESET
+#define __WWDG_RELEASE_RESET __HAL_RCC_WWDG_RELEASE_RESET
+
+#define __TIM21_CLK_ENABLE __HAL_RCC_TIM21_CLK_ENABLE
+#define __TIM21_CLK_DISABLE __HAL_RCC_TIM21_CLK_DISABLE
+#define __TIM21_FORCE_RESET __HAL_RCC_TIM21_FORCE_RESET
+#define __TIM21_RELEASE_RESET __HAL_RCC_TIM21_RELEASE_RESET
+#define __TIM21_CLK_SLEEP_ENABLE __HAL_RCC_TIM21_CLK_SLEEP_ENABLE
+#define __TIM21_CLK_SLEEP_DISABLE __HAL_RCC_TIM21_CLK_SLEEP_DISABLE
+#define __TIM22_CLK_ENABLE __HAL_RCC_TIM22_CLK_ENABLE
+#define __TIM22_CLK_DISABLE __HAL_RCC_TIM22_CLK_DISABLE
+#define __TIM22_FORCE_RESET __HAL_RCC_TIM22_FORCE_RESET
+#define __TIM22_RELEASE_RESET __HAL_RCC_TIM22_RELEASE_RESET
+#define __TIM22_CLK_SLEEP_ENABLE __HAL_RCC_TIM22_CLK_SLEEP_ENABLE
+#define __TIM22_CLK_SLEEP_DISABLE __HAL_RCC_TIM22_CLK_SLEEP_DISABLE
+#define __CRS_CLK_DISABLE __HAL_RCC_CRS_CLK_DISABLE
+#define __CRS_CLK_ENABLE __HAL_RCC_CRS_CLK_ENABLE
+#define __CRS_CLK_SLEEP_DISABLE __HAL_RCC_CRS_CLK_SLEEP_DISABLE
+#define __CRS_CLK_SLEEP_ENABLE __HAL_RCC_CRS_CLK_SLEEP_ENABLE
+#define __CRS_FORCE_RESET __HAL_RCC_CRS_FORCE_RESET
+#define __CRS_RELEASE_RESET __HAL_RCC_CRS_RELEASE_RESET
+#define __RCC_BACKUPRESET_FORCE __HAL_RCC_BACKUPRESET_FORCE
+#define __RCC_BACKUPRESET_RELEASE __HAL_RCC_BACKUPRESET_RELEASE
+
+#define __USB_OTG_FS_FORCE_RESET __HAL_RCC_USB_OTG_FS_FORCE_RESET
+#define __USB_OTG_FS_RELEASE_RESET __HAL_RCC_USB_OTG_FS_RELEASE_RESET
+#define __USB_OTG_FS_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE
+#define __USB_OTG_FS_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE
+#define __USB_OTG_HS_CLK_DISABLE __HAL_RCC_USB_OTG_HS_CLK_DISABLE
+#define __USB_OTG_HS_CLK_ENABLE __HAL_RCC_USB_OTG_HS_CLK_ENABLE
+#define __USB_OTG_HS_ULPI_CLK_ENABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE
+#define __USB_OTG_HS_ULPI_CLK_DISABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE
+#define __TIM9_CLK_SLEEP_ENABLE __HAL_RCC_TIM9_CLK_SLEEP_ENABLE
+#define __TIM9_CLK_SLEEP_DISABLE __HAL_RCC_TIM9_CLK_SLEEP_DISABLE
+#define __TIM10_CLK_SLEEP_ENABLE __HAL_RCC_TIM10_CLK_SLEEP_ENABLE
+#define __TIM10_CLK_SLEEP_DISABLE __HAL_RCC_TIM10_CLK_SLEEP_DISABLE
+#define __TIM11_CLK_SLEEP_ENABLE __HAL_RCC_TIM11_CLK_SLEEP_ENABLE
+#define __TIM11_CLK_SLEEP_DISABLE __HAL_RCC_TIM11_CLK_SLEEP_DISABLE
+#define __ETHMACPTP_CLK_SLEEP_ENABLE __HAL_RCC_ETHMACPTP_CLK_SLEEP_ENABLE
+#define __ETHMACPTP_CLK_SLEEP_DISABLE __HAL_RCC_ETHMACPTP_CLK_SLEEP_DISABLE
+#define __ETHMACPTP_CLK_ENABLE __HAL_RCC_ETHMACPTP_CLK_ENABLE
+#define __ETHMACPTP_CLK_DISABLE __HAL_RCC_ETHMACPTP_CLK_DISABLE
+#define __HASH_CLK_ENABLE __HAL_RCC_HASH_CLK_ENABLE
+#define __HASH_FORCE_RESET __HAL_RCC_HASH_FORCE_RESET
+#define __HASH_RELEASE_RESET __HAL_RCC_HASH_RELEASE_RESET
+#define __HASH_CLK_SLEEP_ENABLE __HAL_RCC_HASH_CLK_SLEEP_ENABLE
+#define __HASH_CLK_SLEEP_DISABLE __HAL_RCC_HASH_CLK_SLEEP_DISABLE
+#define __HASH_CLK_DISABLE __HAL_RCC_HASH_CLK_DISABLE
+#define __SPI5_CLK_ENABLE __HAL_RCC_SPI5_CLK_ENABLE
+#define __SPI5_CLK_DISABLE __HAL_RCC_SPI5_CLK_DISABLE
+#define __SPI5_FORCE_RESET __HAL_RCC_SPI5_FORCE_RESET
+#define __SPI5_RELEASE_RESET __HAL_RCC_SPI5_RELEASE_RESET
+#define __SPI5_CLK_SLEEP_ENABLE __HAL_RCC_SPI5_CLK_SLEEP_ENABLE
+#define __SPI5_CLK_SLEEP_DISABLE __HAL_RCC_SPI5_CLK_SLEEP_DISABLE
+#define __SPI6_CLK_ENABLE __HAL_RCC_SPI6_CLK_ENABLE
+#define __SPI6_CLK_DISABLE __HAL_RCC_SPI6_CLK_DISABLE
+#define __SPI6_FORCE_RESET __HAL_RCC_SPI6_FORCE_RESET
+#define __SPI6_RELEASE_RESET __HAL_RCC_SPI6_RELEASE_RESET
+#define __SPI6_CLK_SLEEP_ENABLE __HAL_RCC_SPI6_CLK_SLEEP_ENABLE
+#define __SPI6_CLK_SLEEP_DISABLE __HAL_RCC_SPI6_CLK_SLEEP_DISABLE
+#define __LTDC_CLK_ENABLE __HAL_RCC_LTDC_CLK_ENABLE
+#define __LTDC_CLK_DISABLE __HAL_RCC_LTDC_CLK_DISABLE
+#define __LTDC_FORCE_RESET __HAL_RCC_LTDC_FORCE_RESET
+#define __LTDC_RELEASE_RESET __HAL_RCC_LTDC_RELEASE_RESET
+#define __LTDC_CLK_SLEEP_ENABLE __HAL_RCC_LTDC_CLK_SLEEP_ENABLE
+#define __ETHMAC_CLK_SLEEP_ENABLE __HAL_RCC_ETHMAC_CLK_SLEEP_ENABLE
+#define __ETHMAC_CLK_SLEEP_DISABLE __HAL_RCC_ETHMAC_CLK_SLEEP_DISABLE
+#define __ETHMACTX_CLK_SLEEP_ENABLE __HAL_RCC_ETHMACTX_CLK_SLEEP_ENABLE
+#define __ETHMACTX_CLK_SLEEP_DISABLE __HAL_RCC_ETHMACTX_CLK_SLEEP_DISABLE
+#define __ETHMACRX_CLK_SLEEP_ENABLE __HAL_RCC_ETHMACRX_CLK_SLEEP_ENABLE
+#define __ETHMACRX_CLK_SLEEP_DISABLE __HAL_RCC_ETHMACRX_CLK_SLEEP_DISABLE
+#define __TIM12_CLK_SLEEP_ENABLE __HAL_RCC_TIM12_CLK_SLEEP_ENABLE
+#define __TIM12_CLK_SLEEP_DISABLE __HAL_RCC_TIM12_CLK_SLEEP_DISABLE
+#define __TIM13_CLK_SLEEP_ENABLE __HAL_RCC_TIM13_CLK_SLEEP_ENABLE
+#define __TIM13_CLK_SLEEP_DISABLE __HAL_RCC_TIM13_CLK_SLEEP_DISABLE
+#define __TIM14_CLK_SLEEP_ENABLE __HAL_RCC_TIM14_CLK_SLEEP_ENABLE
+#define __TIM14_CLK_SLEEP_DISABLE __HAL_RCC_TIM14_CLK_SLEEP_DISABLE
+#define __BKPSRAM_CLK_ENABLE __HAL_RCC_BKPSRAM_CLK_ENABLE
+#define __BKPSRAM_CLK_DISABLE __HAL_RCC_BKPSRAM_CLK_DISABLE
+#define __BKPSRAM_CLK_SLEEP_ENABLE __HAL_RCC_BKPSRAM_CLK_SLEEP_ENABLE
+#define __BKPSRAM_CLK_SLEEP_DISABLE __HAL_RCC_BKPSRAM_CLK_SLEEP_DISABLE
+#define __CCMDATARAMEN_CLK_ENABLE __HAL_RCC_CCMDATARAMEN_CLK_ENABLE
+#define __CCMDATARAMEN_CLK_DISABLE __HAL_RCC_CCMDATARAMEN_CLK_DISABLE
+#define __USART6_CLK_ENABLE __HAL_RCC_USART6_CLK_ENABLE
+#define __USART6_CLK_DISABLE __HAL_RCC_USART6_CLK_DISABLE
+#define __USART6_FORCE_RESET __HAL_RCC_USART6_FORCE_RESET
+#define __USART6_RELEASE_RESET __HAL_RCC_USART6_RELEASE_RESET
+#define __USART6_CLK_SLEEP_ENABLE __HAL_RCC_USART6_CLK_SLEEP_ENABLE
+#define __USART6_CLK_SLEEP_DISABLE __HAL_RCC_USART6_CLK_SLEEP_DISABLE
+#define __SPI4_CLK_ENABLE __HAL_RCC_SPI4_CLK_ENABLE
+#define __SPI4_CLK_DISABLE __HAL_RCC_SPI4_CLK_DISABLE
+#define __SPI4_FORCE_RESET __HAL_RCC_SPI4_FORCE_RESET
+#define __SPI4_RELEASE_RESET __HAL_RCC_SPI4_RELEASE_RESET
+#define __SPI4_CLK_SLEEP_ENABLE __HAL_RCC_SPI4_CLK_SLEEP_ENABLE
+#define __SPI4_CLK_SLEEP_DISABLE __HAL_RCC_SPI4_CLK_SLEEP_DISABLE
+#define __GPIOI_CLK_ENABLE __HAL_RCC_GPIOI_CLK_ENABLE
+#define __GPIOI_CLK_DISABLE __HAL_RCC_GPIOI_CLK_DISABLE
+#define __GPIOI_FORCE_RESET __HAL_RCC_GPIOI_FORCE_RESET
+#define __GPIOI_RELEASE_RESET __HAL_RCC_GPIOI_RELEASE_RESET
+#define __GPIOI_CLK_SLEEP_ENABLE __HAL_RCC_GPIOI_CLK_SLEEP_ENABLE
+#define __GPIOI_CLK_SLEEP_DISABLE __HAL_RCC_GPIOI_CLK_SLEEP_DISABLE
+#define __GPIOJ_CLK_ENABLE __HAL_RCC_GPIOJ_CLK_ENABLE
+#define __GPIOJ_CLK_DISABLE __HAL_RCC_GPIOJ_CLK_DISABLE
+#define __GPIOJ_FORCE_RESET __HAL_RCC_GPIOJ_FORCE_RESET
+#define __GPIOJ_RELEASE_RESET __HAL_RCC_GPIOJ_RELEASE_RESET
+#define __GPIOJ_CLK_SLEEP_ENABLE __HAL_RCC_GPIOJ_CLK_SLEEP_ENABLE
+#define __GPIOJ_CLK_SLEEP_DISABLE __HAL_RCC_GPIOJ_CLK_SLEEP_DISABLE
+#define __GPIOK_CLK_ENABLE __HAL_RCC_GPIOK_CLK_ENABLE
+#define __GPIOK_CLK_DISABLE __HAL_RCC_GPIOK_CLK_DISABLE
+#define __GPIOK_RELEASE_RESET __HAL_RCC_GPIOK_RELEASE_RESET
+#define __GPIOK_CLK_SLEEP_ENABLE __HAL_RCC_GPIOK_CLK_SLEEP_ENABLE
+#define __GPIOK_CLK_SLEEP_DISABLE __HAL_RCC_GPIOK_CLK_SLEEP_DISABLE
+#define __ETH_CLK_ENABLE __HAL_RCC_ETH_CLK_ENABLE
+#define __ETH_CLK_DISABLE __HAL_RCC_ETH_CLK_DISABLE
+#define __DCMI_CLK_ENABLE __HAL_RCC_DCMI_CLK_ENABLE
+#define __DCMI_CLK_DISABLE __HAL_RCC_DCMI_CLK_DISABLE
+#define __DCMI_FORCE_RESET __HAL_RCC_DCMI_FORCE_RESET
+#define __DCMI_RELEASE_RESET __HAL_RCC_DCMI_RELEASE_RESET
+#define __DCMI_CLK_SLEEP_ENABLE __HAL_RCC_DCMI_CLK_SLEEP_ENABLE
+#define __DCMI_CLK_SLEEP_DISABLE __HAL_RCC_DCMI_CLK_SLEEP_DISABLE
+#define __UART7_CLK_ENABLE __HAL_RCC_UART7_CLK_ENABLE
+#define __UART7_CLK_DISABLE __HAL_RCC_UART7_CLK_DISABLE
+#define __UART7_RELEASE_RESET __HAL_RCC_UART7_RELEASE_RESET
+#define __UART7_FORCE_RESET __HAL_RCC_UART7_FORCE_RESET
+#define __UART7_CLK_SLEEP_ENABLE __HAL_RCC_UART7_CLK_SLEEP_ENABLE
+#define __UART7_CLK_SLEEP_DISABLE __HAL_RCC_UART7_CLK_SLEEP_DISABLE
+#define __UART8_CLK_ENABLE __HAL_RCC_UART8_CLK_ENABLE
+#define __UART8_CLK_DISABLE __HAL_RCC_UART8_CLK_DISABLE
+#define __UART8_FORCE_RESET __HAL_RCC_UART8_FORCE_RESET
+#define __UART8_RELEASE_RESET __HAL_RCC_UART8_RELEASE_RESET
+#define __UART8_CLK_SLEEP_ENABLE __HAL_RCC_UART8_CLK_SLEEP_ENABLE
+#define __UART8_CLK_SLEEP_DISABLE __HAL_RCC_UART8_CLK_SLEEP_DISABLE
+#define __OTGHS_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE
+#define __OTGHS_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE
+#define __OTGHS_FORCE_RESET __HAL_RCC_USB_OTG_HS_FORCE_RESET
+#define __OTGHS_RELEASE_RESET __HAL_RCC_USB_OTG_HS_RELEASE_RESET
+#define __OTGHSULPI_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE
+#define __OTGHSULPI_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE
+#define __HAL_RCC_OTGHS_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE
+#define __HAL_RCC_OTGHS_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE
+#define __HAL_RCC_OTGHS_IS_CLK_SLEEP_ENABLED __HAL_RCC_USB_OTG_HS_IS_CLK_SLEEP_ENABLED
+#define __HAL_RCC_OTGHS_IS_CLK_SLEEP_DISABLED __HAL_RCC_USB_OTG_HS_IS_CLK_SLEEP_DISABLED
+#define __HAL_RCC_OTGHS_FORCE_RESET __HAL_RCC_USB_OTG_HS_FORCE_RESET
+#define __HAL_RCC_OTGHS_RELEASE_RESET __HAL_RCC_USB_OTG_HS_RELEASE_RESET
+#define __HAL_RCC_OTGHSULPI_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE
+#define __HAL_RCC_OTGHSULPI_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE
+#define __HAL_RCC_OTGHSULPI_IS_CLK_SLEEP_ENABLED __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_SLEEP_ENABLED
+#define __HAL_RCC_OTGHSULPI_IS_CLK_SLEEP_DISABLED __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_SLEEP_DISABLED
+#define __SRAM3_CLK_SLEEP_ENABLE __HAL_RCC_SRAM3_CLK_SLEEP_ENABLE
+#define __CAN2_CLK_SLEEP_ENABLE __HAL_RCC_CAN2_CLK_SLEEP_ENABLE
+#define __CAN2_CLK_SLEEP_DISABLE __HAL_RCC_CAN2_CLK_SLEEP_DISABLE
+#define __DAC_CLK_SLEEP_ENABLE __HAL_RCC_DAC_CLK_SLEEP_ENABLE
+#define __DAC_CLK_SLEEP_DISABLE __HAL_RCC_DAC_CLK_SLEEP_DISABLE
+#define __ADC2_CLK_SLEEP_ENABLE __HAL_RCC_ADC2_CLK_SLEEP_ENABLE
+#define __ADC2_CLK_SLEEP_DISABLE __HAL_RCC_ADC2_CLK_SLEEP_DISABLE
+#define __ADC3_CLK_SLEEP_ENABLE __HAL_RCC_ADC3_CLK_SLEEP_ENABLE
+#define __ADC3_CLK_SLEEP_DISABLE __HAL_RCC_ADC3_CLK_SLEEP_DISABLE
+#define __FSMC_FORCE_RESET __HAL_RCC_FSMC_FORCE_RESET
+#define __FSMC_RELEASE_RESET __HAL_RCC_FSMC_RELEASE_RESET
+#define __FSMC_CLK_SLEEP_ENABLE __HAL_RCC_FSMC_CLK_SLEEP_ENABLE
+#define __FSMC_CLK_SLEEP_DISABLE __HAL_RCC_FSMC_CLK_SLEEP_DISABLE
+#define __SDIO_FORCE_RESET __HAL_RCC_SDIO_FORCE_RESET
+#define __SDIO_RELEASE_RESET __HAL_RCC_SDIO_RELEASE_RESET
+#define __SDIO_CLK_SLEEP_DISABLE __HAL_RCC_SDIO_CLK_SLEEP_DISABLE
+#define __SDIO_CLK_SLEEP_ENABLE __HAL_RCC_SDIO_CLK_SLEEP_ENABLE
+#define __DMA2D_CLK_ENABLE __HAL_RCC_DMA2D_CLK_ENABLE
+#define __DMA2D_CLK_DISABLE __HAL_RCC_DMA2D_CLK_DISABLE
+#define __DMA2D_FORCE_RESET __HAL_RCC_DMA2D_FORCE_RESET
+#define __DMA2D_RELEASE_RESET __HAL_RCC_DMA2D_RELEASE_RESET
+#define __DMA2D_CLK_SLEEP_ENABLE __HAL_RCC_DMA2D_CLK_SLEEP_ENABLE
+#define __DMA2D_CLK_SLEEP_DISABLE __HAL_RCC_DMA2D_CLK_SLEEP_DISABLE
+
+/* alias define maintained for legacy */
+#define __HAL_RCC_OTGFS_FORCE_RESET __HAL_RCC_USB_OTG_FS_FORCE_RESET
+#define __HAL_RCC_OTGFS_RELEASE_RESET __HAL_RCC_USB_OTG_FS_RELEASE_RESET
+
+#define __ADC12_CLK_ENABLE __HAL_RCC_ADC12_CLK_ENABLE
+#define __ADC12_CLK_DISABLE __HAL_RCC_ADC12_CLK_DISABLE
+#define __ADC34_CLK_ENABLE __HAL_RCC_ADC34_CLK_ENABLE
+#define __ADC34_CLK_DISABLE __HAL_RCC_ADC34_CLK_DISABLE
+#define __DAC2_CLK_ENABLE __HAL_RCC_DAC2_CLK_ENABLE
+#define __DAC2_CLK_DISABLE __HAL_RCC_DAC2_CLK_DISABLE
+#define __TIM18_CLK_ENABLE __HAL_RCC_TIM18_CLK_ENABLE
+#define __TIM18_CLK_DISABLE __HAL_RCC_TIM18_CLK_DISABLE
+#define __TIM19_CLK_ENABLE __HAL_RCC_TIM19_CLK_ENABLE
+#define __TIM19_CLK_DISABLE __HAL_RCC_TIM19_CLK_DISABLE
+#define __TIM20_CLK_ENABLE __HAL_RCC_TIM20_CLK_ENABLE
+#define __TIM20_CLK_DISABLE __HAL_RCC_TIM20_CLK_DISABLE
+#define __HRTIM1_CLK_ENABLE __HAL_RCC_HRTIM1_CLK_ENABLE
+#define __HRTIM1_CLK_DISABLE __HAL_RCC_HRTIM1_CLK_DISABLE
+#define __SDADC1_CLK_ENABLE __HAL_RCC_SDADC1_CLK_ENABLE
+#define __SDADC2_CLK_ENABLE __HAL_RCC_SDADC2_CLK_ENABLE
+#define __SDADC3_CLK_ENABLE __HAL_RCC_SDADC3_CLK_ENABLE
+#define __SDADC1_CLK_DISABLE __HAL_RCC_SDADC1_CLK_DISABLE
+#define __SDADC2_CLK_DISABLE __HAL_RCC_SDADC2_CLK_DISABLE
+#define __SDADC3_CLK_DISABLE __HAL_RCC_SDADC3_CLK_DISABLE
+
+#define __ADC12_FORCE_RESET __HAL_RCC_ADC12_FORCE_RESET
+#define __ADC12_RELEASE_RESET __HAL_RCC_ADC12_RELEASE_RESET
+#define __ADC34_FORCE_RESET __HAL_RCC_ADC34_FORCE_RESET
+#define __ADC34_RELEASE_RESET __HAL_RCC_ADC34_RELEASE_RESET
+#define __DAC2_FORCE_RESET __HAL_RCC_DAC2_FORCE_RESET
+#define __DAC2_RELEASE_RESET __HAL_RCC_DAC2_RELEASE_RESET
+#define __TIM18_FORCE_RESET __HAL_RCC_TIM18_FORCE_RESET
+#define __TIM18_RELEASE_RESET __HAL_RCC_TIM18_RELEASE_RESET
+#define __TIM19_FORCE_RESET __HAL_RCC_TIM19_FORCE_RESET
+#define __TIM19_RELEASE_RESET __HAL_RCC_TIM19_RELEASE_RESET
+#define __TIM20_FORCE_RESET __HAL_RCC_TIM20_FORCE_RESET
+#define __TIM20_RELEASE_RESET __HAL_RCC_TIM20_RELEASE_RESET
+#define __HRTIM1_FORCE_RESET __HAL_RCC_HRTIM1_FORCE_RESET
+#define __HRTIM1_RELEASE_RESET __HAL_RCC_HRTIM1_RELEASE_RESET
+#define __SDADC1_FORCE_RESET __HAL_RCC_SDADC1_FORCE_RESET
+#define __SDADC2_FORCE_RESET __HAL_RCC_SDADC2_FORCE_RESET
+#define __SDADC3_FORCE_RESET __HAL_RCC_SDADC3_FORCE_RESET
+#define __SDADC1_RELEASE_RESET __HAL_RCC_SDADC1_RELEASE_RESET
+#define __SDADC2_RELEASE_RESET __HAL_RCC_SDADC2_RELEASE_RESET
+#define __SDADC3_RELEASE_RESET __HAL_RCC_SDADC3_RELEASE_RESET
+
+#define __ADC1_IS_CLK_ENABLED __HAL_RCC_ADC1_IS_CLK_ENABLED
+#define __ADC1_IS_CLK_DISABLED __HAL_RCC_ADC1_IS_CLK_DISABLED
+#define __ADC12_IS_CLK_ENABLED __HAL_RCC_ADC12_IS_CLK_ENABLED
+#define __ADC12_IS_CLK_DISABLED __HAL_RCC_ADC12_IS_CLK_DISABLED
+#define __ADC34_IS_CLK_ENABLED __HAL_RCC_ADC34_IS_CLK_ENABLED
+#define __ADC34_IS_CLK_DISABLED __HAL_RCC_ADC34_IS_CLK_DISABLED
+#define __CEC_IS_CLK_ENABLED __HAL_RCC_CEC_IS_CLK_ENABLED
+#define __CEC_IS_CLK_DISABLED __HAL_RCC_CEC_IS_CLK_DISABLED
+#define __CRC_IS_CLK_ENABLED __HAL_RCC_CRC_IS_CLK_ENABLED
+#define __CRC_IS_CLK_DISABLED __HAL_RCC_CRC_IS_CLK_DISABLED
+#define __DAC1_IS_CLK_ENABLED __HAL_RCC_DAC1_IS_CLK_ENABLED
+#define __DAC1_IS_CLK_DISABLED __HAL_RCC_DAC1_IS_CLK_DISABLED
+#define __DAC2_IS_CLK_ENABLED __HAL_RCC_DAC2_IS_CLK_ENABLED
+#define __DAC2_IS_CLK_DISABLED __HAL_RCC_DAC2_IS_CLK_DISABLED
+#define __DMA1_IS_CLK_ENABLED __HAL_RCC_DMA1_IS_CLK_ENABLED
+#define __DMA1_IS_CLK_DISABLED __HAL_RCC_DMA1_IS_CLK_DISABLED
+#define __DMA2_IS_CLK_ENABLED __HAL_RCC_DMA2_IS_CLK_ENABLED
+#define __DMA2_IS_CLK_DISABLED __HAL_RCC_DMA2_IS_CLK_DISABLED
+#define __FLITF_IS_CLK_ENABLED __HAL_RCC_FLITF_IS_CLK_ENABLED
+#define __FLITF_IS_CLK_DISABLED __HAL_RCC_FLITF_IS_CLK_DISABLED
+#define __FMC_IS_CLK_ENABLED __HAL_RCC_FMC_IS_CLK_ENABLED
+#define __FMC_IS_CLK_DISABLED __HAL_RCC_FMC_IS_CLK_DISABLED
+#define __GPIOA_IS_CLK_ENABLED __HAL_RCC_GPIOA_IS_CLK_ENABLED
+#define __GPIOA_IS_CLK_DISABLED __HAL_RCC_GPIOA_IS_CLK_DISABLED
+#define __GPIOB_IS_CLK_ENABLED __HAL_RCC_GPIOB_IS_CLK_ENABLED
+#define __GPIOB_IS_CLK_DISABLED __HAL_RCC_GPIOB_IS_CLK_DISABLED
+#define __GPIOC_IS_CLK_ENABLED __HAL_RCC_GPIOC_IS_CLK_ENABLED
+#define __GPIOC_IS_CLK_DISABLED __HAL_RCC_GPIOC_IS_CLK_DISABLED
+#define __GPIOD_IS_CLK_ENABLED __HAL_RCC_GPIOD_IS_CLK_ENABLED
+#define __GPIOD_IS_CLK_DISABLED __HAL_RCC_GPIOD_IS_CLK_DISABLED
+#define __GPIOE_IS_CLK_ENABLED __HAL_RCC_GPIOE_IS_CLK_ENABLED
+#define __GPIOE_IS_CLK_DISABLED __HAL_RCC_GPIOE_IS_CLK_DISABLED
+#define __GPIOF_IS_CLK_ENABLED __HAL_RCC_GPIOF_IS_CLK_ENABLED
+#define __GPIOF_IS_CLK_DISABLED __HAL_RCC_GPIOF_IS_CLK_DISABLED
+#define __GPIOG_IS_CLK_ENABLED __HAL_RCC_GPIOG_IS_CLK_ENABLED
+#define __GPIOG_IS_CLK_DISABLED __HAL_RCC_GPIOG_IS_CLK_DISABLED
+#define __GPIOH_IS_CLK_ENABLED __HAL_RCC_GPIOH_IS_CLK_ENABLED
+#define __GPIOH_IS_CLK_DISABLED __HAL_RCC_GPIOH_IS_CLK_DISABLED
+#define __HRTIM1_IS_CLK_ENABLED __HAL_RCC_HRTIM1_IS_CLK_ENABLED
+#define __HRTIM1_IS_CLK_DISABLED __HAL_RCC_HRTIM1_IS_CLK_DISABLED
+#define __I2C1_IS_CLK_ENABLED __HAL_RCC_I2C1_IS_CLK_ENABLED
+#define __I2C1_IS_CLK_DISABLED __HAL_RCC_I2C1_IS_CLK_DISABLED
+#define __I2C2_IS_CLK_ENABLED __HAL_RCC_I2C2_IS_CLK_ENABLED
+#define __I2C2_IS_CLK_DISABLED __HAL_RCC_I2C2_IS_CLK_DISABLED
+#define __I2C3_IS_CLK_ENABLED __HAL_RCC_I2C3_IS_CLK_ENABLED
+#define __I2C3_IS_CLK_DISABLED __HAL_RCC_I2C3_IS_CLK_DISABLED
+#define __PWR_IS_CLK_ENABLED __HAL_RCC_PWR_IS_CLK_ENABLED
+#define __PWR_IS_CLK_DISABLED __HAL_RCC_PWR_IS_CLK_DISABLED
+#define __SYSCFG_IS_CLK_ENABLED __HAL_RCC_SYSCFG_IS_CLK_ENABLED
+#define __SYSCFG_IS_CLK_DISABLED __HAL_RCC_SYSCFG_IS_CLK_DISABLED
+#define __SPI1_IS_CLK_ENABLED __HAL_RCC_SPI1_IS_CLK_ENABLED
+#define __SPI1_IS_CLK_DISABLED __HAL_RCC_SPI1_IS_CLK_DISABLED
+#define __SPI2_IS_CLK_ENABLED __HAL_RCC_SPI2_IS_CLK_ENABLED
+#define __SPI2_IS_CLK_DISABLED __HAL_RCC_SPI2_IS_CLK_DISABLED
+#define __SPI3_IS_CLK_ENABLED __HAL_RCC_SPI3_IS_CLK_ENABLED
+#define __SPI3_IS_CLK_DISABLED __HAL_RCC_SPI3_IS_CLK_DISABLED
+#define __SPI4_IS_CLK_ENABLED __HAL_RCC_SPI4_IS_CLK_ENABLED
+#define __SPI4_IS_CLK_DISABLED __HAL_RCC_SPI4_IS_CLK_DISABLED
+#define __SDADC1_IS_CLK_ENABLED __HAL_RCC_SDADC1_IS_CLK_ENABLED
+#define __SDADC1_IS_CLK_DISABLED __HAL_RCC_SDADC1_IS_CLK_DISABLED
+#define __SDADC2_IS_CLK_ENABLED __HAL_RCC_SDADC2_IS_CLK_ENABLED
+#define __SDADC2_IS_CLK_DISABLED __HAL_RCC_SDADC2_IS_CLK_DISABLED
+#define __SDADC3_IS_CLK_ENABLED __HAL_RCC_SDADC3_IS_CLK_ENABLED
+#define __SDADC3_IS_CLK_DISABLED __HAL_RCC_SDADC3_IS_CLK_DISABLED
+#define __SRAM_IS_CLK_ENABLED __HAL_RCC_SRAM_IS_CLK_ENABLED
+#define __SRAM_IS_CLK_DISABLED __HAL_RCC_SRAM_IS_CLK_DISABLED
+#define __TIM1_IS_CLK_ENABLED __HAL_RCC_TIM1_IS_CLK_ENABLED
+#define __TIM1_IS_CLK_DISABLED __HAL_RCC_TIM1_IS_CLK_DISABLED
+#define __TIM2_IS_CLK_ENABLED __HAL_RCC_TIM2_IS_CLK_ENABLED
+#define __TIM2_IS_CLK_DISABLED __HAL_RCC_TIM2_IS_CLK_DISABLED
+#define __TIM3_IS_CLK_ENABLED __HAL_RCC_TIM3_IS_CLK_ENABLED
+#define __TIM3_IS_CLK_DISABLED __HAL_RCC_TIM3_IS_CLK_DISABLED
+#define __TIM4_IS_CLK_ENABLED __HAL_RCC_TIM4_IS_CLK_ENABLED
+#define __TIM4_IS_CLK_DISABLED __HAL_RCC_TIM4_IS_CLK_DISABLED
+#define __TIM5_IS_CLK_ENABLED __HAL_RCC_TIM5_IS_CLK_ENABLED
+#define __TIM5_IS_CLK_DISABLED __HAL_RCC_TIM5_IS_CLK_DISABLED
+#define __TIM6_IS_CLK_ENABLED __HAL_RCC_TIM6_IS_CLK_ENABLED
+#define __TIM6_IS_CLK_DISABLED __HAL_RCC_TIM6_IS_CLK_DISABLED
+#define __TIM7_IS_CLK_ENABLED __HAL_RCC_TIM7_IS_CLK_ENABLED
+#define __TIM7_IS_CLK_DISABLED __HAL_RCC_TIM7_IS_CLK_DISABLED
+#define __TIM8_IS_CLK_ENABLED __HAL_RCC_TIM8_IS_CLK_ENABLED
+#define __TIM8_IS_CLK_DISABLED __HAL_RCC_TIM8_IS_CLK_DISABLED
+#define __TIM12_IS_CLK_ENABLED __HAL_RCC_TIM12_IS_CLK_ENABLED
+#define __TIM12_IS_CLK_DISABLED __HAL_RCC_TIM12_IS_CLK_DISABLED
+#define __TIM13_IS_CLK_ENABLED __HAL_RCC_TIM13_IS_CLK_ENABLED
+#define __TIM13_IS_CLK_DISABLED __HAL_RCC_TIM13_IS_CLK_DISABLED
+#define __TIM14_IS_CLK_ENABLED __HAL_RCC_TIM14_IS_CLK_ENABLED
+#define __TIM14_IS_CLK_DISABLED __HAL_RCC_TIM14_IS_CLK_DISABLED
+#define __TIM15_IS_CLK_ENABLED __HAL_RCC_TIM15_IS_CLK_ENABLED
+#define __TIM15_IS_CLK_DISABLED __HAL_RCC_TIM15_IS_CLK_DISABLED
+#define __TIM16_IS_CLK_ENABLED __HAL_RCC_TIM16_IS_CLK_ENABLED
+#define __TIM16_IS_CLK_DISABLED __HAL_RCC_TIM16_IS_CLK_DISABLED
+#define __TIM17_IS_CLK_ENABLED __HAL_RCC_TIM17_IS_CLK_ENABLED
+#define __TIM17_IS_CLK_DISABLED __HAL_RCC_TIM17_IS_CLK_DISABLED
+#define __TIM18_IS_CLK_ENABLED __HAL_RCC_TIM18_IS_CLK_ENABLED
+#define __TIM18_IS_CLK_DISABLED __HAL_RCC_TIM18_IS_CLK_DISABLED
+#define __TIM19_IS_CLK_ENABLED __HAL_RCC_TIM19_IS_CLK_ENABLED
+#define __TIM19_IS_CLK_DISABLED __HAL_RCC_TIM19_IS_CLK_DISABLED
+#define __TIM20_IS_CLK_ENABLED __HAL_RCC_TIM20_IS_CLK_ENABLED
+#define __TIM20_IS_CLK_DISABLED __HAL_RCC_TIM20_IS_CLK_DISABLED
+#define __TSC_IS_CLK_ENABLED __HAL_RCC_TSC_IS_CLK_ENABLED
+#define __TSC_IS_CLK_DISABLED __HAL_RCC_TSC_IS_CLK_DISABLED
+#define __UART4_IS_CLK_ENABLED __HAL_RCC_UART4_IS_CLK_ENABLED
+#define __UART4_IS_CLK_DISABLED __HAL_RCC_UART4_IS_CLK_DISABLED
+#define __UART5_IS_CLK_ENABLED __HAL_RCC_UART5_IS_CLK_ENABLED
+#define __UART5_IS_CLK_DISABLED __HAL_RCC_UART5_IS_CLK_DISABLED
+#define __USART1_IS_CLK_ENABLED __HAL_RCC_USART1_IS_CLK_ENABLED
+#define __USART1_IS_CLK_DISABLED __HAL_RCC_USART1_IS_CLK_DISABLED
+#define __USART2_IS_CLK_ENABLED __HAL_RCC_USART2_IS_CLK_ENABLED
+#define __USART2_IS_CLK_DISABLED __HAL_RCC_USART2_IS_CLK_DISABLED
+#define __USART3_IS_CLK_ENABLED __HAL_RCC_USART3_IS_CLK_ENABLED
+#define __USART3_IS_CLK_DISABLED __HAL_RCC_USART3_IS_CLK_DISABLED
+#define __USB_IS_CLK_ENABLED __HAL_RCC_USB_IS_CLK_ENABLED
+#define __USB_IS_CLK_DISABLED __HAL_RCC_USB_IS_CLK_DISABLED
+#define __WWDG_IS_CLK_ENABLED __HAL_RCC_WWDG_IS_CLK_ENABLED
+#define __WWDG_IS_CLK_DISABLED __HAL_RCC_WWDG_IS_CLK_DISABLED
+
+#if defined(STM32L1)
+#define __HAL_RCC_CRYP_CLK_DISABLE __HAL_RCC_AES_CLK_DISABLE
+#define __HAL_RCC_CRYP_CLK_ENABLE __HAL_RCC_AES_CLK_ENABLE
+#define __HAL_RCC_CRYP_CLK_SLEEP_DISABLE __HAL_RCC_AES_CLK_SLEEP_DISABLE
+#define __HAL_RCC_CRYP_CLK_SLEEP_ENABLE __HAL_RCC_AES_CLK_SLEEP_ENABLE
+#define __HAL_RCC_CRYP_FORCE_RESET __HAL_RCC_AES_FORCE_RESET
+#define __HAL_RCC_CRYP_RELEASE_RESET __HAL_RCC_AES_RELEASE_RESET
+#endif /* STM32L1 */
+
+#if defined(STM32F4)
+#define __HAL_RCC_SDMMC1_FORCE_RESET __HAL_RCC_SDIO_FORCE_RESET
+#define __HAL_RCC_SDMMC1_RELEASE_RESET __HAL_RCC_SDIO_RELEASE_RESET
+#define __HAL_RCC_SDMMC1_CLK_SLEEP_ENABLE __HAL_RCC_SDIO_CLK_SLEEP_ENABLE
+#define __HAL_RCC_SDMMC1_CLK_SLEEP_DISABLE __HAL_RCC_SDIO_CLK_SLEEP_DISABLE
+#define __HAL_RCC_SDMMC1_CLK_ENABLE __HAL_RCC_SDIO_CLK_ENABLE
+#define __HAL_RCC_SDMMC1_CLK_DISABLE __HAL_RCC_SDIO_CLK_DISABLE
+#define __HAL_RCC_SDMMC1_IS_CLK_ENABLED __HAL_RCC_SDIO_IS_CLK_ENABLED
+#define __HAL_RCC_SDMMC1_IS_CLK_DISABLED __HAL_RCC_SDIO_IS_CLK_DISABLED
+#define Sdmmc1ClockSelection SdioClockSelection
+#define RCC_PERIPHCLK_SDMMC1 RCC_PERIPHCLK_SDIO
+#define RCC_SDMMC1CLKSOURCE_CLK48 RCC_SDIOCLKSOURCE_CK48
+#define RCC_SDMMC1CLKSOURCE_SYSCLK RCC_SDIOCLKSOURCE_SYSCLK
+#define __HAL_RCC_SDMMC1_CONFIG __HAL_RCC_SDIO_CONFIG
+#define __HAL_RCC_GET_SDMMC1_SOURCE __HAL_RCC_GET_SDIO_SOURCE
+#endif
+
+#if defined(STM32F7) || defined(STM32L4)
+#define __HAL_RCC_SDIO_FORCE_RESET __HAL_RCC_SDMMC1_FORCE_RESET
+#define __HAL_RCC_SDIO_RELEASE_RESET __HAL_RCC_SDMMC1_RELEASE_RESET
+#define __HAL_RCC_SDIO_CLK_SLEEP_ENABLE __HAL_RCC_SDMMC1_CLK_SLEEP_ENABLE
+#define __HAL_RCC_SDIO_CLK_SLEEP_DISABLE __HAL_RCC_SDMMC1_CLK_SLEEP_DISABLE
+#define __HAL_RCC_SDIO_CLK_ENABLE __HAL_RCC_SDMMC1_CLK_ENABLE
+#define __HAL_RCC_SDIO_CLK_DISABLE __HAL_RCC_SDMMC1_CLK_DISABLE
+#define __HAL_RCC_SDIO_IS_CLK_ENABLED __HAL_RCC_SDMMC1_IS_CLK_ENABLED
+#define __HAL_RCC_SDIO_IS_CLK_DISABLED __HAL_RCC_SDMMC1_IS_CLK_DISABLED
+#define SdioClockSelection Sdmmc1ClockSelection
+#define RCC_PERIPHCLK_SDIO RCC_PERIPHCLK_SDMMC1
+#define __HAL_RCC_SDIO_CONFIG __HAL_RCC_SDMMC1_CONFIG
+#define __HAL_RCC_GET_SDIO_SOURCE __HAL_RCC_GET_SDMMC1_SOURCE
+#endif
+
+#if defined(STM32F7)
+#define RCC_SDIOCLKSOURCE_CLK48 RCC_SDMMC1CLKSOURCE_CLK48
+#define RCC_SDIOCLKSOURCE_SYSCLK RCC_SDMMC1CLKSOURCE_SYSCLK
+#endif
+
+#if defined(STM32H7)
+#define __HAL_RCC_USB_OTG_HS_CLK_ENABLE() __HAL_RCC_USB1_OTG_HS_CLK_ENABLE()
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE() __HAL_RCC_USB1_OTG_HS_ULPI_CLK_ENABLE()
+#define __HAL_RCC_USB_OTG_HS_CLK_DISABLE() __HAL_RCC_USB1_OTG_HS_CLK_DISABLE()
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE() __HAL_RCC_USB1_OTG_HS_ULPI_CLK_DISABLE()
+#define __HAL_RCC_USB_OTG_HS_FORCE_RESET() __HAL_RCC_USB1_OTG_HS_FORCE_RESET()
+#define __HAL_RCC_USB_OTG_HS_RELEASE_RESET() __HAL_RCC_USB1_OTG_HS_RELEASE_RESET()
+#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE() __HAL_RCC_USB1_OTG_HS_CLK_SLEEP_ENABLE()
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE() __HAL_RCC_USB1_OTG_HS_ULPI_CLK_SLEEP_ENABLE()
+#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE() __HAL_RCC_USB1_OTG_HS_CLK_SLEEP_DISABLE()
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE() __HAL_RCC_USB1_OTG_HS_ULPI_CLK_SLEEP_DISABLE()
+
+#define __HAL_RCC_USB_OTG_FS_CLK_ENABLE() __HAL_RCC_USB2_OTG_FS_CLK_ENABLE()
+#define __HAL_RCC_USB_OTG_FS_ULPI_CLK_ENABLE() __HAL_RCC_USB2_OTG_FS_ULPI_CLK_ENABLE()
+#define __HAL_RCC_USB_OTG_FS_CLK_DISABLE() __HAL_RCC_USB2_OTG_FS_CLK_DISABLE()
+#define __HAL_RCC_USB_OTG_FS_ULPI_CLK_DISABLE() __HAL_RCC_USB2_OTG_FS_ULPI_CLK_DISABLE()
+#define __HAL_RCC_USB_OTG_FS_FORCE_RESET() __HAL_RCC_USB2_OTG_FS_FORCE_RESET()
+#define __HAL_RCC_USB_OTG_FS_RELEASE_RESET() __HAL_RCC_USB2_OTG_FS_RELEASE_RESET()
+#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE() __HAL_RCC_USB2_OTG_FS_CLK_SLEEP_ENABLE()
+#define __HAL_RCC_USB_OTG_FS_ULPI_CLK_SLEEP_ENABLE() __HAL_RCC_USB2_OTG_FS_ULPI_CLK_SLEEP_ENABLE()
+#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE() __HAL_RCC_USB2_OTG_FS_CLK_SLEEP_DISABLE()
+#define __HAL_RCC_USB_OTG_FS_ULPI_CLK_SLEEP_DISABLE() __HAL_RCC_USB2_OTG_FS_ULPI_CLK_SLEEP_DISABLE()
+#endif
+
+#define __HAL_RCC_I2SCLK __HAL_RCC_I2S_CONFIG
+#define __HAL_RCC_I2SCLK_CONFIG __HAL_RCC_I2S_CONFIG
+
+#define __RCC_PLLSRC RCC_GET_PLL_OSCSOURCE
+
+#define IS_RCC_MSIRANGE IS_RCC_MSI_CLOCK_RANGE
+#define IS_RCC_RTCCLK_SOURCE IS_RCC_RTCCLKSOURCE
+#define IS_RCC_SYSCLK_DIV IS_RCC_HCLK
+#define IS_RCC_HCLK_DIV IS_RCC_PCLK
+#define IS_RCC_PERIPHCLK IS_RCC_PERIPHCLOCK
+
+#define RCC_IT_HSI14 RCC_IT_HSI14RDY
+
+#define RCC_IT_CSSLSE RCC_IT_LSECSS
+#define RCC_IT_CSSHSE RCC_IT_CSS
+
+#define RCC_PLLMUL_3 RCC_PLL_MUL3
+#define RCC_PLLMUL_4 RCC_PLL_MUL4
+#define RCC_PLLMUL_6 RCC_PLL_MUL6
+#define RCC_PLLMUL_8 RCC_PLL_MUL8
+#define RCC_PLLMUL_12 RCC_PLL_MUL12
+#define RCC_PLLMUL_16 RCC_PLL_MUL16
+#define RCC_PLLMUL_24 RCC_PLL_MUL24
+#define RCC_PLLMUL_32 RCC_PLL_MUL32
+#define RCC_PLLMUL_48 RCC_PLL_MUL48
+
+#define RCC_PLLDIV_2 RCC_PLL_DIV2
+#define RCC_PLLDIV_3 RCC_PLL_DIV3
+#define RCC_PLLDIV_4 RCC_PLL_DIV4
+
+#define IS_RCC_MCOSOURCE IS_RCC_MCO1SOURCE
+#define __HAL_RCC_MCO_CONFIG __HAL_RCC_MCO1_CONFIG
+#define RCC_MCO_NODIV RCC_MCODIV_1
+#define RCC_MCO_DIV1 RCC_MCODIV_1
+#define RCC_MCO_DIV2 RCC_MCODIV_2
+#define RCC_MCO_DIV4 RCC_MCODIV_4
+#define RCC_MCO_DIV8 RCC_MCODIV_8
+#define RCC_MCO_DIV16 RCC_MCODIV_16
+#define RCC_MCO_DIV32 RCC_MCODIV_32
+#define RCC_MCO_DIV64 RCC_MCODIV_64
+#define RCC_MCO_DIV128 RCC_MCODIV_128
+#define RCC_MCOSOURCE_NONE RCC_MCO1SOURCE_NOCLOCK
+#define RCC_MCOSOURCE_LSI RCC_MCO1SOURCE_LSI
+#define RCC_MCOSOURCE_LSE RCC_MCO1SOURCE_LSE
+#define RCC_MCOSOURCE_SYSCLK RCC_MCO1SOURCE_SYSCLK
+#define RCC_MCOSOURCE_HSI RCC_MCO1SOURCE_HSI
+#define RCC_MCOSOURCE_HSI14 RCC_MCO1SOURCE_HSI14
+#define RCC_MCOSOURCE_HSI48 RCC_MCO1SOURCE_HSI48
+#define RCC_MCOSOURCE_HSE RCC_MCO1SOURCE_HSE
+#define RCC_MCOSOURCE_PLLCLK_DIV1 RCC_MCO1SOURCE_PLLCLK
+#define RCC_MCOSOURCE_PLLCLK_NODIV RCC_MCO1SOURCE_PLLCLK
+#define RCC_MCOSOURCE_PLLCLK_DIV2 RCC_MCO1SOURCE_PLLCLK_DIV2
+
+#if defined(STM32L4)
+#define RCC_RTCCLKSOURCE_NO_CLK RCC_RTCCLKSOURCE_NONE
+#elif defined(STM32WB) || defined(STM32G0) || defined(STM32G4)
+#else
+#define RCC_RTCCLKSOURCE_NONE RCC_RTCCLKSOURCE_NO_CLK
+#endif
+
+#define RCC_USBCLK_PLLSAI1 RCC_USBCLKSOURCE_PLLSAI1
+#define RCC_USBCLK_PLL RCC_USBCLKSOURCE_PLL
+#define RCC_USBCLK_MSI RCC_USBCLKSOURCE_MSI
+#define RCC_USBCLKSOURCE_PLLCLK RCC_USBCLKSOURCE_PLL
+#define RCC_USBPLLCLK_DIV1 RCC_USBCLKSOURCE_PLL
+#define RCC_USBPLLCLK_DIV1_5 RCC_USBCLKSOURCE_PLL_DIV1_5
+#define RCC_USBPLLCLK_DIV2 RCC_USBCLKSOURCE_PLL_DIV2
+#define RCC_USBPLLCLK_DIV3 RCC_USBCLKSOURCE_PLL_DIV3
+
+#define HSION_BitNumber RCC_HSION_BIT_NUMBER
+#define HSION_BITNUMBER RCC_HSION_BIT_NUMBER
+#define HSEON_BitNumber RCC_HSEON_BIT_NUMBER
+#define HSEON_BITNUMBER RCC_HSEON_BIT_NUMBER
+#define MSION_BITNUMBER RCC_MSION_BIT_NUMBER
+#define CSSON_BitNumber RCC_CSSON_BIT_NUMBER
+#define CSSON_BITNUMBER RCC_CSSON_BIT_NUMBER
+#define PLLON_BitNumber RCC_PLLON_BIT_NUMBER
+#define PLLON_BITNUMBER RCC_PLLON_BIT_NUMBER
+#define PLLI2SON_BitNumber RCC_PLLI2SON_BIT_NUMBER
+#define I2SSRC_BitNumber RCC_I2SSRC_BIT_NUMBER
+#define RTCEN_BitNumber RCC_RTCEN_BIT_NUMBER
+#define RTCEN_BITNUMBER RCC_RTCEN_BIT_NUMBER
+#define BDRST_BitNumber RCC_BDRST_BIT_NUMBER
+#define BDRST_BITNUMBER RCC_BDRST_BIT_NUMBER
+#define RTCRST_BITNUMBER RCC_RTCRST_BIT_NUMBER
+#define LSION_BitNumber RCC_LSION_BIT_NUMBER
+#define LSION_BITNUMBER RCC_LSION_BIT_NUMBER
+#define LSEON_BitNumber RCC_LSEON_BIT_NUMBER
+#define LSEON_BITNUMBER RCC_LSEON_BIT_NUMBER
+#define LSEBYP_BITNUMBER RCC_LSEBYP_BIT_NUMBER
+#define PLLSAION_BitNumber RCC_PLLSAION_BIT_NUMBER
+#define TIMPRE_BitNumber RCC_TIMPRE_BIT_NUMBER
+#define RMVF_BitNumber RCC_RMVF_BIT_NUMBER
+#define RMVF_BITNUMBER RCC_RMVF_BIT_NUMBER
+#define RCC_CR2_HSI14TRIM_BitNumber RCC_HSI14TRIM_BIT_NUMBER
+#define CR_BYTE2_ADDRESS RCC_CR_BYTE2_ADDRESS
+#define CIR_BYTE1_ADDRESS RCC_CIR_BYTE1_ADDRESS
+#define CIR_BYTE2_ADDRESS RCC_CIR_BYTE2_ADDRESS
+#define BDCR_BYTE0_ADDRESS RCC_BDCR_BYTE0_ADDRESS
+#define DBP_TIMEOUT_VALUE RCC_DBP_TIMEOUT_VALUE
+#define LSE_TIMEOUT_VALUE RCC_LSE_TIMEOUT_VALUE
+
+#define CR_HSION_BB RCC_CR_HSION_BB
+#define CR_CSSON_BB RCC_CR_CSSON_BB
+#define CR_PLLON_BB RCC_CR_PLLON_BB
+#define CR_PLLI2SON_BB RCC_CR_PLLI2SON_BB
+#define CR_MSION_BB RCC_CR_MSION_BB
+#define CSR_LSION_BB RCC_CSR_LSION_BB
+#define CSR_LSEON_BB RCC_CSR_LSEON_BB
+#define CSR_LSEBYP_BB RCC_CSR_LSEBYP_BB
+#define CSR_RTCEN_BB RCC_CSR_RTCEN_BB
+#define CSR_RTCRST_BB RCC_CSR_RTCRST_BB
+#define CFGR_I2SSRC_BB RCC_CFGR_I2SSRC_BB
+#define BDCR_RTCEN_BB RCC_BDCR_RTCEN_BB
+#define BDCR_BDRST_BB RCC_BDCR_BDRST_BB
+#define CR_HSEON_BB RCC_CR_HSEON_BB
+#define CSR_RMVF_BB RCC_CSR_RMVF_BB
+#define CR_PLLSAION_BB RCC_CR_PLLSAION_BB
+#define DCKCFGR_TIMPRE_BB RCC_DCKCFGR_TIMPRE_BB
+
+#define __HAL_RCC_CRS_ENABLE_FREQ_ERROR_COUNTER __HAL_RCC_CRS_FREQ_ERROR_COUNTER_ENABLE
+#define __HAL_RCC_CRS_DISABLE_FREQ_ERROR_COUNTER __HAL_RCC_CRS_FREQ_ERROR_COUNTER_DISABLE
+#define __HAL_RCC_CRS_ENABLE_AUTOMATIC_CALIB __HAL_RCC_CRS_AUTOMATIC_CALIB_ENABLE
+#define __HAL_RCC_CRS_DISABLE_AUTOMATIC_CALIB __HAL_RCC_CRS_AUTOMATIC_CALIB_DISABLE
+#define __HAL_RCC_CRS_CALCULATE_RELOADVALUE __HAL_RCC_CRS_RELOADVALUE_CALCULATE
+
+#define __HAL_RCC_GET_IT_SOURCE __HAL_RCC_GET_IT
+
+#define RCC_CRS_SYNCWARM RCC_CRS_SYNCWARN
+#define RCC_CRS_TRIMOV RCC_CRS_TRIMOVF
+
+#define RCC_PERIPHCLK_CK48 RCC_PERIPHCLK_CLK48
+#define RCC_CK48CLKSOURCE_PLLQ RCC_CLK48CLKSOURCE_PLLQ
+#define RCC_CK48CLKSOURCE_PLLSAIP RCC_CLK48CLKSOURCE_PLLSAIP
+#define RCC_CK48CLKSOURCE_PLLI2SQ RCC_CLK48CLKSOURCE_PLLI2SQ
+#define IS_RCC_CK48CLKSOURCE IS_RCC_CLK48CLKSOURCE
+#define RCC_SDIOCLKSOURCE_CK48 RCC_SDIOCLKSOURCE_CLK48
+
+#define __HAL_RCC_DFSDM_CLK_ENABLE __HAL_RCC_DFSDM1_CLK_ENABLE
+#define __HAL_RCC_DFSDM_CLK_DISABLE __HAL_RCC_DFSDM1_CLK_DISABLE
+#define __HAL_RCC_DFSDM_IS_CLK_ENABLED __HAL_RCC_DFSDM1_IS_CLK_ENABLED
+#define __HAL_RCC_DFSDM_IS_CLK_DISABLED __HAL_RCC_DFSDM1_IS_CLK_DISABLED
+#define __HAL_RCC_DFSDM_FORCE_RESET __HAL_RCC_DFSDM1_FORCE_RESET
+#define __HAL_RCC_DFSDM_RELEASE_RESET __HAL_RCC_DFSDM1_RELEASE_RESET
+#define __HAL_RCC_DFSDM_CLK_SLEEP_ENABLE __HAL_RCC_DFSDM1_CLK_SLEEP_ENABLE
+#define __HAL_RCC_DFSDM_CLK_SLEEP_DISABLE __HAL_RCC_DFSDM1_CLK_SLEEP_DISABLE
+#define __HAL_RCC_DFSDM_IS_CLK_SLEEP_ENABLED __HAL_RCC_DFSDM1_IS_CLK_SLEEP_ENABLED
+#define __HAL_RCC_DFSDM_IS_CLK_SLEEP_DISABLED __HAL_RCC_DFSDM1_IS_CLK_SLEEP_DISABLED
+#define DfsdmClockSelection Dfsdm1ClockSelection
+#define RCC_PERIPHCLK_DFSDM RCC_PERIPHCLK_DFSDM1
+#define RCC_DFSDMCLKSOURCE_PCLK RCC_DFSDM1CLKSOURCE_PCLK2
+#define RCC_DFSDMCLKSOURCE_SYSCLK RCC_DFSDM1CLKSOURCE_SYSCLK
+#define __HAL_RCC_DFSDM_CONFIG __HAL_RCC_DFSDM1_CONFIG
+#define __HAL_RCC_GET_DFSDM_SOURCE __HAL_RCC_GET_DFSDM1_SOURCE
+#define RCC_DFSDM1CLKSOURCE_PCLK RCC_DFSDM1CLKSOURCE_PCLK2
+#define RCC_SWPMI1CLKSOURCE_PCLK RCC_SWPMI1CLKSOURCE_PCLK1
+#define RCC_LPTIM1CLKSOURCE_PCLK RCC_LPTIM1CLKSOURCE_PCLK1
+#define RCC_LPTIM2CLKSOURCE_PCLK RCC_LPTIM2CLKSOURCE_PCLK1
+
+#define RCC_DFSDM1AUDIOCLKSOURCE_I2SAPB1 RCC_DFSDM1AUDIOCLKSOURCE_I2S1
+#define RCC_DFSDM1AUDIOCLKSOURCE_I2SAPB2 RCC_DFSDM1AUDIOCLKSOURCE_I2S2
+#define RCC_DFSDM2AUDIOCLKSOURCE_I2SAPB1 RCC_DFSDM2AUDIOCLKSOURCE_I2S1
+#define RCC_DFSDM2AUDIOCLKSOURCE_I2SAPB2 RCC_DFSDM2AUDIOCLKSOURCE_I2S2
+#define RCC_DFSDM1CLKSOURCE_APB2 RCC_DFSDM1CLKSOURCE_PCLK2
+#define RCC_DFSDM2CLKSOURCE_APB2 RCC_DFSDM2CLKSOURCE_PCLK2
+#define RCC_FMPI2C1CLKSOURCE_APB RCC_FMPI2C1CLKSOURCE_PCLK1
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_RNG_Aliased_Macros HAL RNG Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define HAL_RNG_ReadyCallback(__HANDLE__) HAL_RNG_ReadyDataCallback((__HANDLE__), uint32_t random32bit)
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_RTC_Aliased_Macros HAL RTC Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#if defined (STM32G0) || defined (STM32L412xx) || defined (STM32L422xx) || defined (STM32G4)
+#else
+#define __HAL_RTC_CLEAR_FLAG __HAL_RTC_EXTI_CLEAR_FLAG
+#endif
+#define __HAL_RTC_DISABLE_IT __HAL_RTC_EXTI_DISABLE_IT
+#define __HAL_RTC_ENABLE_IT __HAL_RTC_EXTI_ENABLE_IT
+
+#if defined (STM32F1)
+#define __HAL_RTC_EXTI_CLEAR_FLAG(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_CLEAR_FLAG()
+
+#define __HAL_RTC_EXTI_ENABLE_IT(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_ENABLE_IT()
+
+#define __HAL_RTC_EXTI_DISABLE_IT(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_DISABLE_IT()
+
+#define __HAL_RTC_EXTI_GET_FLAG(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_GET_FLAG()
+
+#define __HAL_RTC_EXTI_GENERATE_SWIT(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_GENERATE_SWIT()
+#else
+#define __HAL_RTC_EXTI_CLEAR_FLAG(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_CLEAR_FLAG() : \
+ (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG() : \
+ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG()))
+#define __HAL_RTC_EXTI_ENABLE_IT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_ENABLE_IT() : \
+ (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT() : \
+ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT()))
+#define __HAL_RTC_EXTI_DISABLE_IT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_DISABLE_IT() : \
+ (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT() : \
+ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT()))
+#define __HAL_RTC_EXTI_GET_FLAG(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_GET_FLAG() : \
+ (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG() : \
+ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG()))
+#define __HAL_RTC_EXTI_GENERATE_SWIT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_GENERATE_SWIT() : \
+ (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT() : \
+ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT()))
+#endif /* STM32F1 */
+
+#define IS_ALARM IS_RTC_ALARM
+#define IS_ALARM_MASK IS_RTC_ALARM_MASK
+#define IS_TAMPER IS_RTC_TAMPER
+#define IS_TAMPER_ERASE_MODE IS_RTC_TAMPER_ERASE_MODE
+#define IS_TAMPER_FILTER IS_RTC_TAMPER_FILTER
+#define IS_TAMPER_INTERRUPT IS_RTC_TAMPER_INTERRUPT
+#define IS_TAMPER_MASKFLAG_STATE IS_RTC_TAMPER_MASKFLAG_STATE
+#define IS_TAMPER_PRECHARGE_DURATION IS_RTC_TAMPER_PRECHARGE_DURATION
+#define IS_TAMPER_PULLUP_STATE IS_RTC_TAMPER_PULLUP_STATE
+#define IS_TAMPER_SAMPLING_FREQ IS_RTC_TAMPER_SAMPLING_FREQ
+#define IS_TAMPER_TIMESTAMPONTAMPER_DETECTION IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION
+#define IS_TAMPER_TRIGGER IS_RTC_TAMPER_TRIGGER
+#define IS_WAKEUP_CLOCK IS_RTC_WAKEUP_CLOCK
+#define IS_WAKEUP_COUNTER IS_RTC_WAKEUP_COUNTER
+
+#define __RTC_WRITEPROTECTION_ENABLE __HAL_RTC_WRITEPROTECTION_ENABLE
+#define __RTC_WRITEPROTECTION_DISABLE __HAL_RTC_WRITEPROTECTION_DISABLE
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_SD_Aliased_Macros HAL SD Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define SD_OCR_CID_CSD_OVERWRIETE SD_OCR_CID_CSD_OVERWRITE
+#define SD_CMD_SD_APP_STAUS SD_CMD_SD_APP_STATUS
+
+#if defined(STM32F4) || defined(STM32F2)
+#define SD_SDMMC_DISABLED SD_SDIO_DISABLED
+#define SD_SDMMC_FUNCTION_BUSY SD_SDIO_FUNCTION_BUSY
+#define SD_SDMMC_FUNCTION_FAILED SD_SDIO_FUNCTION_FAILED
+#define SD_SDMMC_UNKNOWN_FUNCTION SD_SDIO_UNKNOWN_FUNCTION
+#define SD_CMD_SDMMC_SEN_OP_COND SD_CMD_SDIO_SEN_OP_COND
+#define SD_CMD_SDMMC_RW_DIRECT SD_CMD_SDIO_RW_DIRECT
+#define SD_CMD_SDMMC_RW_EXTENDED SD_CMD_SDIO_RW_EXTENDED
+#define __HAL_SD_SDMMC_ENABLE __HAL_SD_SDIO_ENABLE
+#define __HAL_SD_SDMMC_DISABLE __HAL_SD_SDIO_DISABLE
+#define __HAL_SD_SDMMC_DMA_ENABLE __HAL_SD_SDIO_DMA_ENABLE
+#define __HAL_SD_SDMMC_DMA_DISABLE __HAL_SD_SDIO_DMA_DISABL
+#define __HAL_SD_SDMMC_ENABLE_IT __HAL_SD_SDIO_ENABLE_IT
+#define __HAL_SD_SDMMC_DISABLE_IT __HAL_SD_SDIO_DISABLE_IT
+#define __HAL_SD_SDMMC_GET_FLAG __HAL_SD_SDIO_GET_FLAG
+#define __HAL_SD_SDMMC_CLEAR_FLAG __HAL_SD_SDIO_CLEAR_FLAG
+#define __HAL_SD_SDMMC_GET_IT __HAL_SD_SDIO_GET_IT
+#define __HAL_SD_SDMMC_CLEAR_IT __HAL_SD_SDIO_CLEAR_IT
+#define SDMMC_STATIC_FLAGS SDIO_STATIC_FLAGS
+#define SDMMC_CMD0TIMEOUT SDIO_CMD0TIMEOUT
+#define SD_SDMMC_SEND_IF_COND SD_SDIO_SEND_IF_COND
+/* alias CMSIS */
+#define SDMMC1_IRQn SDIO_IRQn
+#define SDMMC1_IRQHandler SDIO_IRQHandler
+#endif
+
+#if defined(STM32F7) || defined(STM32L4)
+#define SD_SDIO_DISABLED SD_SDMMC_DISABLED
+#define SD_SDIO_FUNCTION_BUSY SD_SDMMC_FUNCTION_BUSY
+#define SD_SDIO_FUNCTION_FAILED SD_SDMMC_FUNCTION_FAILED
+#define SD_SDIO_UNKNOWN_FUNCTION SD_SDMMC_UNKNOWN_FUNCTION
+#define SD_CMD_SDIO_SEN_OP_COND SD_CMD_SDMMC_SEN_OP_COND
+#define SD_CMD_SDIO_RW_DIRECT SD_CMD_SDMMC_RW_DIRECT
+#define SD_CMD_SDIO_RW_EXTENDED SD_CMD_SDMMC_RW_EXTENDED
+#define __HAL_SD_SDIO_ENABLE __HAL_SD_SDMMC_ENABLE
+#define __HAL_SD_SDIO_DISABLE __HAL_SD_SDMMC_DISABLE
+#define __HAL_SD_SDIO_DMA_ENABLE __HAL_SD_SDMMC_DMA_ENABLE
+#define __HAL_SD_SDIO_DMA_DISABL __HAL_SD_SDMMC_DMA_DISABLE
+#define __HAL_SD_SDIO_ENABLE_IT __HAL_SD_SDMMC_ENABLE_IT
+#define __HAL_SD_SDIO_DISABLE_IT __HAL_SD_SDMMC_DISABLE_IT
+#define __HAL_SD_SDIO_GET_FLAG __HAL_SD_SDMMC_GET_FLAG
+#define __HAL_SD_SDIO_CLEAR_FLAG __HAL_SD_SDMMC_CLEAR_FLAG
+#define __HAL_SD_SDIO_GET_IT __HAL_SD_SDMMC_GET_IT
+#define __HAL_SD_SDIO_CLEAR_IT __HAL_SD_SDMMC_CLEAR_IT
+#define SDIO_STATIC_FLAGS SDMMC_STATIC_FLAGS
+#define SDIO_CMD0TIMEOUT SDMMC_CMD0TIMEOUT
+#define SD_SDIO_SEND_IF_COND SD_SDMMC_SEND_IF_COND
+/* alias CMSIS for compatibilities */
+#define SDIO_IRQn SDMMC1_IRQn
+#define SDIO_IRQHandler SDMMC1_IRQHandler
+#endif
+
+#if defined(STM32F7) || defined(STM32F4) || defined(STM32F2) || defined(STM32L4) || defined(STM32H7)
+#define HAL_SD_CardCIDTypedef HAL_SD_CardCIDTypeDef
+#define HAL_SD_CardCSDTypedef HAL_SD_CardCSDTypeDef
+#define HAL_SD_CardStatusTypedef HAL_SD_CardStatusTypeDef
+#define HAL_SD_CardStateTypedef HAL_SD_CardStateTypeDef
+#endif
+
+#if defined(STM32H7)
+#define HAL_MMCEx_Read_DMADoubleBuffer0CpltCallback HAL_MMCEx_Read_DMADoubleBuf0CpltCallback
+#define HAL_MMCEx_Read_DMADoubleBuffer1CpltCallback HAL_MMCEx_Read_DMADoubleBuf1CpltCallback
+#define HAL_MMCEx_Write_DMADoubleBuffer0CpltCallback HAL_MMCEx_Write_DMADoubleBuf0CpltCallback
+#define HAL_MMCEx_Write_DMADoubleBuffer1CpltCallback HAL_MMCEx_Write_DMADoubleBuf1CpltCallback
+#define HAL_SDEx_Read_DMADoubleBuffer0CpltCallback HAL_SDEx_Read_DMADoubleBuf0CpltCallback
+#define HAL_SDEx_Read_DMADoubleBuffer1CpltCallback HAL_SDEx_Read_DMADoubleBuf1CpltCallback
+#define HAL_SDEx_Write_DMADoubleBuffer0CpltCallback HAL_SDEx_Write_DMADoubleBuf0CpltCallback
+#define HAL_SDEx_Write_DMADoubleBuffer1CpltCallback HAL_SDEx_Write_DMADoubleBuf1CpltCallback
+#define HAL_SD_DriveTransciver_1_8V_Callback HAL_SD_DriveTransceiver_1_8V_Callback
+#endif
+/**
+ * @}
+ */
+
+/** @defgroup HAL_SMARTCARD_Aliased_Macros HAL SMARTCARD Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define __SMARTCARD_ENABLE_IT __HAL_SMARTCARD_ENABLE_IT
+#define __SMARTCARD_DISABLE_IT __HAL_SMARTCARD_DISABLE_IT
+#define __SMARTCARD_ENABLE __HAL_SMARTCARD_ENABLE
+#define __SMARTCARD_DISABLE __HAL_SMARTCARD_DISABLE
+#define __SMARTCARD_DMA_REQUEST_ENABLE __HAL_SMARTCARD_DMA_REQUEST_ENABLE
+#define __SMARTCARD_DMA_REQUEST_DISABLE __HAL_SMARTCARD_DMA_REQUEST_DISABLE
+
+#define __HAL_SMARTCARD_GETCLOCKSOURCE SMARTCARD_GETCLOCKSOURCE
+#define __SMARTCARD_GETCLOCKSOURCE SMARTCARD_GETCLOCKSOURCE
+
+#define IS_SMARTCARD_ONEBIT_SAMPLING IS_SMARTCARD_ONE_BIT_SAMPLE
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_SMBUS_Aliased_Macros HAL SMBUS Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __HAL_SMBUS_RESET_CR1 SMBUS_RESET_CR1
+#define __HAL_SMBUS_RESET_CR2 SMBUS_RESET_CR2
+#define __HAL_SMBUS_GENERATE_START SMBUS_GENERATE_START
+#define __HAL_SMBUS_GET_ADDR_MATCH SMBUS_GET_ADDR_MATCH
+#define __HAL_SMBUS_GET_DIR SMBUS_GET_DIR
+#define __HAL_SMBUS_GET_STOP_MODE SMBUS_GET_STOP_MODE
+#define __HAL_SMBUS_GET_PEC_MODE SMBUS_GET_PEC_MODE
+#define __HAL_SMBUS_GET_ALERT_ENABLED SMBUS_GET_ALERT_ENABLED
+/**
+ * @}
+ */
+
+/** @defgroup HAL_SPI_Aliased_Macros HAL SPI Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define __HAL_SPI_1LINE_TX SPI_1LINE_TX
+#define __HAL_SPI_1LINE_RX SPI_1LINE_RX
+#define __HAL_SPI_RESET_CRC SPI_RESET_CRC
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_UART_Aliased_Macros HAL UART Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define __HAL_UART_GETCLOCKSOURCE UART_GETCLOCKSOURCE
+#define __HAL_UART_MASK_COMPUTATION UART_MASK_COMPUTATION
+#define __UART_GETCLOCKSOURCE UART_GETCLOCKSOURCE
+#define __UART_MASK_COMPUTATION UART_MASK_COMPUTATION
+
+#define IS_UART_WAKEUPMETHODE IS_UART_WAKEUPMETHOD
+
+#define IS_UART_ONEBIT_SAMPLE IS_UART_ONE_BIT_SAMPLE
+#define IS_UART_ONEBIT_SAMPLING IS_UART_ONE_BIT_SAMPLE
+
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_USART_Aliased_Macros HAL USART Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define __USART_ENABLE_IT __HAL_USART_ENABLE_IT
+#define __USART_DISABLE_IT __HAL_USART_DISABLE_IT
+#define __USART_ENABLE __HAL_USART_ENABLE
+#define __USART_DISABLE __HAL_USART_DISABLE
+
+#define __HAL_USART_GETCLOCKSOURCE USART_GETCLOCKSOURCE
+#define __USART_GETCLOCKSOURCE USART_GETCLOCKSOURCE
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_USB_Aliased_Macros HAL USB Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define USB_EXTI_LINE_WAKEUP USB_WAKEUP_EXTI_LINE
+
+#define USB_FS_EXTI_TRIGGER_RISING_EDGE USB_OTG_FS_WAKEUP_EXTI_RISING_EDGE
+#define USB_FS_EXTI_TRIGGER_FALLING_EDGE USB_OTG_FS_WAKEUP_EXTI_FALLING_EDGE
+#define USB_FS_EXTI_TRIGGER_BOTH_EDGE USB_OTG_FS_WAKEUP_EXTI_RISING_FALLING_EDGE
+#define USB_FS_EXTI_LINE_WAKEUP USB_OTG_FS_WAKEUP_EXTI_LINE
+
+#define USB_HS_EXTI_TRIGGER_RISING_EDGE USB_OTG_HS_WAKEUP_EXTI_RISING_EDGE
+#define USB_HS_EXTI_TRIGGER_FALLING_EDGE USB_OTG_HS_WAKEUP_EXTI_FALLING_EDGE
+#define USB_HS_EXTI_TRIGGER_BOTH_EDGE USB_OTG_HS_WAKEUP_EXTI_RISING_FALLING_EDGE
+#define USB_HS_EXTI_LINE_WAKEUP USB_OTG_HS_WAKEUP_EXTI_LINE
+
+#define __HAL_USB_EXTI_ENABLE_IT __HAL_USB_WAKEUP_EXTI_ENABLE_IT
+#define __HAL_USB_EXTI_DISABLE_IT __HAL_USB_WAKEUP_EXTI_DISABLE_IT
+#define __HAL_USB_EXTI_GET_FLAG __HAL_USB_WAKEUP_EXTI_GET_FLAG
+#define __HAL_USB_EXTI_CLEAR_FLAG __HAL_USB_WAKEUP_EXTI_CLEAR_FLAG
+#define __HAL_USB_EXTI_SET_RISING_EDGE_TRIGGER __HAL_USB_WAKEUP_EXTI_ENABLE_RISING_EDGE
+#define __HAL_USB_EXTI_SET_FALLING_EDGE_TRIGGER __HAL_USB_WAKEUP_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_USB_EXTI_SET_FALLINGRISING_TRIGGER __HAL_USB_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE
+
+#define __HAL_USB_FS_EXTI_ENABLE_IT __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_IT
+#define __HAL_USB_FS_EXTI_DISABLE_IT __HAL_USB_OTG_FS_WAKEUP_EXTI_DISABLE_IT
+#define __HAL_USB_FS_EXTI_GET_FLAG __HAL_USB_OTG_FS_WAKEUP_EXTI_GET_FLAG
+#define __HAL_USB_FS_EXTI_CLEAR_FLAG __HAL_USB_OTG_FS_WAKEUP_EXTI_CLEAR_FLAG
+#define __HAL_USB_FS_EXTI_SET_RISING_EGDE_TRIGGER __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_EDGE
+#define __HAL_USB_FS_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_USB_FS_EXTI_SET_FALLINGRISING_TRIGGER __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE
+#define __HAL_USB_FS_EXTI_GENERATE_SWIT __HAL_USB_OTG_FS_WAKEUP_EXTI_GENERATE_SWIT
+
+#define __HAL_USB_HS_EXTI_ENABLE_IT __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_IT
+#define __HAL_USB_HS_EXTI_DISABLE_IT __HAL_USB_OTG_HS_WAKEUP_EXTI_DISABLE_IT
+#define __HAL_USB_HS_EXTI_GET_FLAG __HAL_USB_OTG_HS_WAKEUP_EXTI_GET_FLAG
+#define __HAL_USB_HS_EXTI_CLEAR_FLAG __HAL_USB_OTG_HS_WAKEUP_EXTI_CLEAR_FLAG
+#define __HAL_USB_HS_EXTI_SET_RISING_EGDE_TRIGGER __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_EDGE
+#define __HAL_USB_HS_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_USB_HS_EXTI_SET_FALLINGRISING_TRIGGER __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE
+#define __HAL_USB_HS_EXTI_GENERATE_SWIT __HAL_USB_OTG_HS_WAKEUP_EXTI_GENERATE_SWIT
+
+#define HAL_PCD_ActiveRemoteWakeup HAL_PCD_ActivateRemoteWakeup
+#define HAL_PCD_DeActiveRemoteWakeup HAL_PCD_DeActivateRemoteWakeup
+
+#define HAL_PCD_SetTxFiFo HAL_PCDEx_SetTxFiFo
+#define HAL_PCD_SetRxFiFo HAL_PCDEx_SetRxFiFo
+/**
+ * @}
+ */
+
+/** @defgroup HAL_TIM_Aliased_Macros HAL TIM Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __HAL_TIM_SetICPrescalerValue TIM_SET_ICPRESCALERVALUE
+#define __HAL_TIM_ResetICPrescalerValue TIM_RESET_ICPRESCALERVALUE
+
+#define TIM_GET_ITSTATUS __HAL_TIM_GET_IT_SOURCE
+#define TIM_GET_CLEAR_IT __HAL_TIM_CLEAR_IT
+
+#define __HAL_TIM_GET_ITSTATUS __HAL_TIM_GET_IT_SOURCE
+
+#define __HAL_TIM_DIRECTION_STATUS __HAL_TIM_IS_TIM_COUNTING_DOWN
+#define __HAL_TIM_PRESCALER __HAL_TIM_SET_PRESCALER
+#define __HAL_TIM_SetCounter __HAL_TIM_SET_COUNTER
+#define __HAL_TIM_GetCounter __HAL_TIM_GET_COUNTER
+#define __HAL_TIM_SetAutoreload __HAL_TIM_SET_AUTORELOAD
+#define __HAL_TIM_GetAutoreload __HAL_TIM_GET_AUTORELOAD
+#define __HAL_TIM_SetClockDivision __HAL_TIM_SET_CLOCKDIVISION
+#define __HAL_TIM_GetClockDivision __HAL_TIM_GET_CLOCKDIVISION
+#define __HAL_TIM_SetICPrescaler __HAL_TIM_SET_ICPRESCALER
+#define __HAL_TIM_GetICPrescaler __HAL_TIM_GET_ICPRESCALER
+#define __HAL_TIM_SetCompare __HAL_TIM_SET_COMPARE
+#define __HAL_TIM_GetCompare __HAL_TIM_GET_COMPARE
+
+#define TIM_BREAKINPUTSOURCE_DFSDM TIM_BREAKINPUTSOURCE_DFSDM1
+/**
+ * @}
+ */
+
+/** @defgroup HAL_ETH_Aliased_Macros HAL ETH Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define __HAL_ETH_EXTI_ENABLE_IT __HAL_ETH_WAKEUP_EXTI_ENABLE_IT
+#define __HAL_ETH_EXTI_DISABLE_IT __HAL_ETH_WAKEUP_EXTI_DISABLE_IT
+#define __HAL_ETH_EXTI_GET_FLAG __HAL_ETH_WAKEUP_EXTI_GET_FLAG
+#define __HAL_ETH_EXTI_CLEAR_FLAG __HAL_ETH_WAKEUP_EXTI_CLEAR_FLAG
+#define __HAL_ETH_EXTI_SET_RISING_EGDE_TRIGGER __HAL_ETH_WAKEUP_EXTI_ENABLE_RISING_EDGE_TRIGGER
+#define __HAL_ETH_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_ETH_WAKEUP_EXTI_ENABLE_FALLING_EDGE_TRIGGER
+#define __HAL_ETH_EXTI_SET_FALLINGRISING_TRIGGER __HAL_ETH_WAKEUP_EXTI_ENABLE_FALLINGRISING_TRIGGER
+
+#define ETH_PROMISCIOUSMODE_ENABLE ETH_PROMISCUOUS_MODE_ENABLE
+#define ETH_PROMISCIOUSMODE_DISABLE ETH_PROMISCUOUS_MODE_DISABLE
+#define IS_ETH_PROMISCIOUS_MODE IS_ETH_PROMISCUOUS_MODE
+/**
+ * @}
+ */
+
+/** @defgroup HAL_LTDC_Aliased_Macros HAL LTDC Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __HAL_LTDC_LAYER LTDC_LAYER
+#define __HAL_LTDC_RELOAD_CONFIG __HAL_LTDC_RELOAD_IMMEDIATE_CONFIG
+/**
+ * @}
+ */
+
+/** @defgroup HAL_SAI_Aliased_Macros HAL SAI Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define SAI_OUTPUTDRIVE_DISABLED SAI_OUTPUTDRIVE_DISABLE
+#define SAI_OUTPUTDRIVE_ENABLED SAI_OUTPUTDRIVE_ENABLE
+#define SAI_MASTERDIVIDER_ENABLED SAI_MASTERDIVIDER_ENABLE
+#define SAI_MASTERDIVIDER_DISABLED SAI_MASTERDIVIDER_DISABLE
+#define SAI_STREOMODE SAI_STEREOMODE
+#define SAI_FIFOStatus_Empty SAI_FIFOSTATUS_EMPTY
+#define SAI_FIFOStatus_Less1QuarterFull SAI_FIFOSTATUS_LESS1QUARTERFULL
+#define SAI_FIFOStatus_1QuarterFull SAI_FIFOSTATUS_1QUARTERFULL
+#define SAI_FIFOStatus_HalfFull SAI_FIFOSTATUS_HALFFULL
+#define SAI_FIFOStatus_3QuartersFull SAI_FIFOSTATUS_3QUARTERFULL
+#define SAI_FIFOStatus_Full SAI_FIFOSTATUS_FULL
+#define IS_SAI_BLOCK_MONO_STREO_MODE IS_SAI_BLOCK_MONO_STEREO_MODE
+#define SAI_SYNCHRONOUS_EXT SAI_SYNCHRONOUS_EXT_SAI1
+#define SAI_SYNCEXT_IN_ENABLE SAI_SYNCEXT_OUTBLOCKA_ENABLE
+/**
+ * @}
+ */
+
+/** @defgroup HAL_SPDIFRX_Aliased_Macros HAL SPDIFRX Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#if defined(STM32H7)
+#define HAL_SPDIFRX_ReceiveControlFlow HAL_SPDIFRX_ReceiveCtrlFlow
+#define HAL_SPDIFRX_ReceiveControlFlow_IT HAL_SPDIFRX_ReceiveCtrlFlow_IT
+#define HAL_SPDIFRX_ReceiveControlFlow_DMA HAL_SPDIFRX_ReceiveCtrlFlow_DMA
+#endif
+/**
+ * @}
+ */
+
+/** @defgroup HAL_HRTIM_Aliased_Functions HAL HRTIM Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#if defined (STM32H7) || defined (STM32G4) || defined (STM32F3)
+#define HAL_HRTIM_WaveformCounterStart_IT HAL_HRTIM_WaveformCountStart_IT
+#define HAL_HRTIM_WaveformCounterStart_DMA HAL_HRTIM_WaveformCountStart_DMA
+#define HAL_HRTIM_WaveformCounterStart HAL_HRTIM_WaveformCountStart
+#define HAL_HRTIM_WaveformCounterStop_IT HAL_HRTIM_WaveformCountStop_IT
+#define HAL_HRTIM_WaveformCounterStop_DMA HAL_HRTIM_WaveformCountStop_DMA
+#define HAL_HRTIM_WaveformCounterStop HAL_HRTIM_WaveformCountStop
+#endif
+/**
+ * @}
+ */
+
+/** @defgroup HAL_QSPI_Aliased_Macros HAL QSPI Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#if defined (STM32L4)
+#define HAL_QPSI_TIMEOUT_DEFAULT_VALUE HAL_QSPI_TIMEOUT_DEFAULT_VALUE
+#endif
+/**
+ * @}
+ */
+
+/** @defgroup HAL_PPP_Aliased_Macros HAL PPP Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32_HAL_LEGACY */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32f0xx_hal_can_legacy.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32f0xx_hal_can_legacy.h
new file mode 100644
index 0000000..0df56b5
--- /dev/null
+++ b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/Legacy/stm32f0xx_hal_can_legacy.h
@@ -0,0 +1,794 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_can_legacy.h
+ * @author MCD Application Team
+ * @brief Header file of CAN HAL Legacy module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_CAN_LEGACY_H
+#define __STM32F0xx_HAL_CAN_LEGACY_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F072xB) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup CAN
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup CAN_Exported_Types CAN Exported Types
+ * @{
+ */
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_CAN_STATE_RESET = 0x00U, /*!< CAN not yet initialized or disabled */
+ HAL_CAN_STATE_READY = 0x01U, /*!< CAN initialized and ready for use */
+ HAL_CAN_STATE_BUSY = 0x02U, /*!< CAN process is ongoing */
+ HAL_CAN_STATE_BUSY_TX = 0x12U, /*!< CAN process is ongoing */
+ HAL_CAN_STATE_BUSY_RX0 = 0x22U, /*!< CAN process is ongoing */
+ HAL_CAN_STATE_BUSY_RX1 = 0x32U, /*!< CAN process is ongoing */
+ HAL_CAN_STATE_BUSY_TX_RX0 = 0x42U, /*!< CAN process is ongoing */
+ HAL_CAN_STATE_BUSY_TX_RX1 = 0x52U, /*!< CAN process is ongoing */
+ HAL_CAN_STATE_BUSY_RX0_RX1 = 0x62U, /*!< CAN process is ongoing */
+ HAL_CAN_STATE_BUSY_TX_RX0_RX1 = 0x72U, /*!< CAN process is ongoing */
+ HAL_CAN_STATE_TIMEOUT = 0x03U, /*!< CAN in Timeout state */
+ HAL_CAN_STATE_ERROR = 0x04U /*!< CAN error state */
+
+}HAL_CAN_StateTypeDef;
+
+/**
+ * @brief CAN init structure definition
+ */
+typedef struct
+{
+ uint32_t Prescaler; /*!< Specifies the length of a time quantum.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 1024. */
+
+ uint32_t Mode; /*!< Specifies the CAN operating mode.
+ This parameter can be a value of @ref CAN_operating_mode */
+
+ uint32_t SJW; /*!< Specifies the maximum number of time quanta
+ the CAN hardware is allowed to lengthen or
+ shorten a bit to perform resynchronization.
+ This parameter can be a value of @ref CAN_synchronisation_jump_width */
+
+ uint32_t BS1; /*!< Specifies the number of time quanta in Bit Segment 1.
+ This parameter can be a value of @ref CAN_time_quantum_in_bit_segment_1 */
+
+ uint32_t BS2; /*!< Specifies the number of time quanta in Bit Segment 2.
+ This parameter can be a value of @ref CAN_time_quantum_in_bit_segment_2 */
+
+ uint32_t TTCM; /*!< Enable or disable the time triggered communication mode.
+ This parameter can be set to ENABLE or DISABLE. */
+
+ uint32_t ABOM; /*!< Enable or disable the automatic bus-off management.
+ This parameter can be set to ENABLE or DISABLE. */
+
+ uint32_t AWUM; /*!< Enable or disable the automatic wake-up mode.
+ This parameter can be set to ENABLE or DISABLE. */
+
+ uint32_t NART; /*!< Enable or disable the non-automatic retransmission mode.
+ This parameter can be set to ENABLE or DISABLE. */
+
+ uint32_t RFLM; /*!< Enable or disable the Receive FIFO Locked mode.
+ This parameter can be set to ENABLE or DISABLE. */
+
+ uint32_t TXFP; /*!< Enable or disable the transmit FIFO priority.
+ This parameter can be set to ENABLE or DISABLE. */
+}CAN_InitTypeDef;
+
+/**
+ * @brief CAN filter configuration structure definition
+ */
+typedef struct
+{
+ uint32_t FilterIdHigh; /*!< Specifies the filter identification number (MSBs for a 32-bit
+ configuration, first one for a 16-bit configuration).
+ This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
+
+ uint32_t FilterIdLow; /*!< Specifies the filter identification number (LSBs for a 32-bit
+ configuration, second one for a 16-bit configuration).
+ This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
+
+ uint32_t FilterMaskIdHigh; /*!< Specifies the filter mask number or identification number,
+ according to the mode (MSBs for a 32-bit configuration,
+ first one for a 16-bit configuration).
+ This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
+
+ uint32_t FilterMaskIdLow; /*!< Specifies the filter mask number or identification number,
+ according to the mode (LSBs for a 32-bit configuration,
+ second one for a 16-bit configuration).
+ This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
+
+ uint32_t FilterFIFOAssignment; /*!< Specifies the FIFO (0 or 1U) which will be assigned to the filter.
+ This parameter can be a value of @ref CAN_filter_FIFO */
+
+ uint32_t FilterNumber; /*!< Specifies the filter which will be initialized.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 27. */
+
+ uint32_t FilterMode; /*!< Specifies the filter mode to be initialized.
+ This parameter can be a value of @ref CAN_filter_mode */
+
+ uint32_t FilterScale; /*!< Specifies the filter scale.
+ This parameter can be a value of @ref CAN_filter_scale */
+
+ uint32_t FilterActivation; /*!< Enable or disable the filter.
+ This parameter can be set to ENABLE or DISABLE. */
+
+ uint32_t BankNumber; /*!< Select the start slave bank filter
+ This parameter must be a number between Min_Data = 0 and Max_Data = 28. */
+
+}CAN_FilterConfTypeDef;
+
+/**
+ * @brief CAN Tx message structure definition
+ */
+typedef struct
+{
+ uint32_t StdId; /*!< Specifies the standard identifier.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0x7FF. */
+
+ uint32_t ExtId; /*!< Specifies the extended identifier.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0x1FFFFFFF. */
+
+ uint32_t IDE; /*!< Specifies the type of identifier for the message that will be transmitted.
+ This parameter can be a value of @ref CAN_identifier_type */
+
+ uint32_t RTR; /*!< Specifies the type of frame for the message that will be transmitted.
+ This parameter can be a value of @ref CAN_remote_transmission_request */
+
+ uint32_t DLC; /*!< Specifies the length of the frame that will be transmitted.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 8. */
+
+ uint8_t Data[8]; /*!< Contains the data to be transmitted.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0xFF. */
+
+}CanTxMsgTypeDef;
+
+/**
+ * @brief CAN Rx message structure definition
+ */
+typedef struct
+{
+ uint32_t StdId; /*!< Specifies the standard identifier.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0x7FF. */
+
+ uint32_t ExtId; /*!< Specifies the extended identifier.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0x1FFFFFFF. */
+
+ uint32_t IDE; /*!< Specifies the type of identifier for the message that will be received.
+ This parameter can be a value of @ref CAN_identifier_type */
+
+ uint32_t RTR; /*!< Specifies the type of frame for the received message.
+ This parameter can be a value of @ref CAN_remote_transmission_request */
+
+ uint32_t DLC; /*!< Specifies the length of the frame that will be received.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 8. */
+
+ uint8_t Data[8]; /*!< Contains the data to be received.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0xFF. */
+
+ uint32_t FMI; /*!< Specifies the index of the filter the message stored in the mailbox passes through.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0xFF. */
+
+ uint32_t FIFONumber; /*!< Specifies the receive FIFO number.
+ This parameter can be CAN_FIFO0 or CAN_FIFO1 */
+
+}CanRxMsgTypeDef;
+
+/**
+ * @brief CAN handle Structure definition
+ */
+typedef struct
+{
+ CAN_TypeDef *Instance; /*!< Register base address */
+
+ CAN_InitTypeDef Init; /*!< CAN required parameters */
+
+ CanTxMsgTypeDef* pTxMsg; /*!< Pointer to transmit structure */
+
+ CanRxMsgTypeDef* pRxMsg; /*!< Pointer to reception structure for RX FIFO0 msg */
+
+ CanRxMsgTypeDef* pRx1Msg; /*!< Pointer to reception structure for RX FIFO1 msg */
+
+ HAL_LockTypeDef Lock; /*!< CAN locking object */
+
+ __IO HAL_CAN_StateTypeDef State; /*!< CAN communication state */
+
+ __IO uint32_t ErrorCode; /*!< CAN Error code
+ This parameter can be a value of @ref CAN_Error_Code */
+
+}CAN_HandleTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup CAN_Exported_Constants CAN Exported Constants
+ * @{
+ */
+
+/** @defgroup CAN_Error_Code CAN Error Code
+ * @{
+ */
+#define HAL_CAN_ERROR_NONE (0x00000000U) /*!< No error */
+#define HAL_CAN_ERROR_EWG (0x00000001U) /*!< EWG error */
+#define HAL_CAN_ERROR_EPV (0x00000002U) /*!< EPV error */
+#define HAL_CAN_ERROR_BOF (0x00000004U) /*!< BOF error */
+#define HAL_CAN_ERROR_STF (0x00000008U) /*!< Stuff error */
+#define HAL_CAN_ERROR_FOR (0x00000010U) /*!< Form error */
+#define HAL_CAN_ERROR_ACK (0x00000020U) /*!< Acknowledgment error */
+#define HAL_CAN_ERROR_BR (0x00000040U) /*!< Bit recessive */
+#define HAL_CAN_ERROR_BD (0x00000080U) /*!< LEC dominant */
+#define HAL_CAN_ERROR_CRC (0x00000100U) /*!< LEC transfer error */
+#define HAL_CAN_ERROR_FOV0 (0x00000200U) /*!< FIFO0 overrun error */
+#define HAL_CAN_ERROR_FOV1 (0x00000400U) /*!< FIFO1 overrun error */
+#define HAL_CAN_ERROR_TXFAIL (0x00000800U) /*!< Transmit failure */
+/**
+ * @}
+ */
+
+/** @defgroup CAN_InitStatus CAN InitStatus
+ * @{
+ */
+#define CAN_INITSTATUS_FAILED (0x00000000U) /*!< CAN initialization failed */
+#define CAN_INITSTATUS_SUCCESS (0x00000001U) /*!< CAN initialization OK */
+/**
+ * @}
+ */
+
+/** @defgroup CAN_operating_mode CAN Operating Mode
+ * @{
+ */
+#define CAN_MODE_NORMAL (0x00000000U) /*!< Normal mode */
+#define CAN_MODE_LOOPBACK ((uint32_t)CAN_BTR_LBKM) /*!< Loopback mode */
+#define CAN_MODE_SILENT ((uint32_t)CAN_BTR_SILM) /*!< Silent mode */
+#define CAN_MODE_SILENT_LOOPBACK ((uint32_t)(CAN_BTR_LBKM | CAN_BTR_SILM)) /*!< Loopback combined with silent mode */
+/**
+ * @}
+ */
+
+
+/** @defgroup CAN_synchronisation_jump_width CAN Synchronization Jump Width
+ * @{
+ */
+#define CAN_SJW_1TQ (0x00000000U) /*!< 1 time quantum */
+#define CAN_SJW_2TQ ((uint32_t)CAN_BTR_SJW_0) /*!< 2 time quantum */
+#define CAN_SJW_3TQ ((uint32_t)CAN_BTR_SJW_1) /*!< 3 time quantum */
+#define CAN_SJW_4TQ ((uint32_t)CAN_BTR_SJW) /*!< 4 time quantum */
+/**
+ * @}
+ */
+
+/** @defgroup CAN_time_quantum_in_bit_segment_1 CAN Time Quantum in Bit Segment 1
+ * @{
+ */
+#define CAN_BS1_1TQ (0x00000000U) /*!< 1 time quantum */
+#define CAN_BS1_2TQ ((uint32_t)CAN_BTR_TS1_0) /*!< 2 time quantum */
+#define CAN_BS1_3TQ ((uint32_t)CAN_BTR_TS1_1) /*!< 3 time quantum */
+#define CAN_BS1_4TQ ((uint32_t)(CAN_BTR_TS1_1 | CAN_BTR_TS1_0)) /*!< 4 time quantum */
+#define CAN_BS1_5TQ ((uint32_t)CAN_BTR_TS1_2) /*!< 5 time quantum */
+#define CAN_BS1_6TQ ((uint32_t)(CAN_BTR_TS1_2 | CAN_BTR_TS1_0)) /*!< 6 time quantum */
+#define CAN_BS1_7TQ ((uint32_t)(CAN_BTR_TS1_2 | CAN_BTR_TS1_1)) /*!< 7 time quantum */
+#define CAN_BS1_8TQ ((uint32_t)(CAN_BTR_TS1_2 | CAN_BTR_TS1_1 | CAN_BTR_TS1_0)) /*!< 8 time quantum */
+#define CAN_BS1_9TQ ((uint32_t)CAN_BTR_TS1_3) /*!< 9 time quantum */
+#define CAN_BS1_10TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_0)) /*!< 10 time quantum */
+#define CAN_BS1_11TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_1)) /*!< 11 time quantum */
+#define CAN_BS1_12TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_1 | CAN_BTR_TS1_0)) /*!< 12 time quantum */
+#define CAN_BS1_13TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_2)) /*!< 13 time quantum */
+#define CAN_BS1_14TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_2 | CAN_BTR_TS1_0)) /*!< 14 time quantum */
+#define CAN_BS1_15TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_2 | CAN_BTR_TS1_1)) /*!< 15 time quantum */
+#define CAN_BS1_16TQ ((uint32_t)CAN_BTR_TS1) /*!< 16 time quantum */
+/**
+ * @}
+ */
+
+/** @defgroup CAN_time_quantum_in_bit_segment_2 CAN Time Quantum in Bit Segment 2
+ * @{
+ */
+#define CAN_BS2_1TQ (0x00000000U) /*!< 1 time quantum */
+#define CAN_BS2_2TQ ((uint32_t)CAN_BTR_TS2_0) /*!< 2 time quantum */
+#define CAN_BS2_3TQ ((uint32_t)CAN_BTR_TS2_1) /*!< 3 time quantum */
+#define CAN_BS2_4TQ ((uint32_t)(CAN_BTR_TS2_1 | CAN_BTR_TS2_0)) /*!< 4 time quantum */
+#define CAN_BS2_5TQ ((uint32_t)CAN_BTR_TS2_2) /*!< 5 time quantum */
+#define CAN_BS2_6TQ ((uint32_t)(CAN_BTR_TS2_2 | CAN_BTR_TS2_0)) /*!< 6 time quantum */
+#define CAN_BS2_7TQ ((uint32_t)(CAN_BTR_TS2_2 | CAN_BTR_TS2_1)) /*!< 7 time quantum */
+#define CAN_BS2_8TQ ((uint32_t)CAN_BTR_TS2) /*!< 8 time quantum */
+/**
+ * @}
+ */
+
+/** @defgroup CAN_filter_mode CAN Filter Mode
+ * @{
+ */
+#define CAN_FILTERMODE_IDMASK ((uint8_t)0x00U) /*!< Identifier mask mode */
+#define CAN_FILTERMODE_IDLIST ((uint8_t)0x01U) /*!< Identifier list mode */
+/**
+ * @}
+ */
+
+/** @defgroup CAN_filter_scale CAN Filter Scale
+ * @{
+ */
+#define CAN_FILTERSCALE_16BIT ((uint8_t)0x00U) /*!< Two 16-bit filters */
+#define CAN_FILTERSCALE_32BIT ((uint8_t)0x01U) /*!< One 32-bit filter */
+/**
+ * @}
+ */
+
+/** @defgroup CAN_filter_FIFO CAN Filter FIFO
+ * @{
+ */
+#define CAN_FILTER_FIFO0 ((uint8_t)0x00U) /*!< Filter FIFO 0 assignment for filter x */
+#define CAN_FILTER_FIFO1 ((uint8_t)0x01U) /*!< Filter FIFO 1 assignment for filter x */
+/**
+ * @}
+ */
+
+/** @defgroup CAN_identifier_type CAN Identifier Type
+ * @{
+ */
+#define CAN_ID_STD (0x00000000U) /*!< Standard Id */
+#define CAN_ID_EXT (0x00000004U) /*!< Extended Id */
+/**
+ * @}
+ */
+
+/** @defgroup CAN_remote_transmission_request CAN Remote Transmission Request
+ * @{
+ */
+#define CAN_RTR_DATA (0x00000000U) /*!< Data frame */
+#define CAN_RTR_REMOTE (0x00000002U) /*!< Remote frame */
+/**
+ * @}
+ */
+
+/** @defgroup CAN_receive_FIFO_number_constants CAN Receive FIFO Number
+ * @{
+ */
+#define CAN_FIFO0 ((uint8_t)0x00U) /*!< CAN FIFO 0 used to receive */
+#define CAN_FIFO1 ((uint8_t)0x01U) /*!< CAN FIFO 1 used to receive */
+/**
+ * @}
+ */
+
+/** @defgroup CAN_flags CAN Flags
+ * @{
+ */
+/* If the flag is 0x3XXXXXXX, it means that it can be used with CAN_GetFlagStatus()
+ and CAN_ClearFlag() functions. */
+/* If the flag is 0x1XXXXXXX, it means that it can only be used with
+ CAN_GetFlagStatus() function. */
+
+/* Transmit Flags */
+#define CAN_FLAG_RQCP0 (0x00000500U) /*!< Request MailBox0 flag */
+#define CAN_FLAG_RQCP1 (0x00000508U) /*!< Request MailBox1 flag */
+#define CAN_FLAG_RQCP2 (0x00000510U) /*!< Request MailBox2 flag */
+#define CAN_FLAG_TXOK0 (0x00000501U) /*!< Transmission OK MailBox0 flag */
+#define CAN_FLAG_TXOK1 (0x00000509U) /*!< Transmission OK MailBox1 flag */
+#define CAN_FLAG_TXOK2 (0x00000511U) /*!< Transmission OK MailBox2 flag */
+#define CAN_FLAG_TME0 (0x0000051AU) /*!< Transmit mailbox 0 empty flag */
+#define CAN_FLAG_TME1 (0x0000051BU) /*!< Transmit mailbox 0 empty flag */
+#define CAN_FLAG_TME2 (0x0000051CU) /*!< Transmit mailbox 0 empty flag */
+
+/* Receive Flags */
+#define CAN_FLAG_FF0 (0x00000203U) /*!< FIFO 0 Full flag */
+#define CAN_FLAG_FOV0 (0x00000204U) /*!< FIFO 0 Overrun flag */
+
+#define CAN_FLAG_FF1 (0x00000403U) /*!< FIFO 1 Full flag */
+#define CAN_FLAG_FOV1 (0x00000404U) /*!< FIFO 1 Overrun flag */
+
+/* Operating Mode Flags */
+#define CAN_FLAG_INAK (0x00000100U) /*!< Initialization acknowledge flag */
+#define CAN_FLAG_SLAK (0x00000101U) /*!< Sleep acknowledge flag */
+#define CAN_FLAG_ERRI (0x00000102U) /*!< Error flag */
+#define CAN_FLAG_WKU (0x00000103U) /*!< Wake up flag */
+#define CAN_FLAG_SLAKI (0x00000104U) /*!< Sleep acknowledge flag */
+/* @note When SLAK interrupt is disabled (SLKIE=0U), no polling on SLAKI is possible.
+ In this case the SLAK bit can be polled.*/
+
+/* Error Flags */
+#define CAN_FLAG_EWG (0x00000300U) /*!< Error warning flag */
+#define CAN_FLAG_EPV (0x00000301U) /*!< Error passive flag */
+#define CAN_FLAG_BOF (0x00000302U) /*!< Bus-Off flag */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup CAN_interrupts CAN Interrupts
+ * @{
+ */
+#define CAN_IT_TME ((uint32_t)CAN_IER_TMEIE) /*!< Transmit mailbox empty interrupt */
+
+/* Receive Interrupts */
+#define CAN_IT_FMP0 ((uint32_t)CAN_IER_FMPIE0) /*!< FIFO 0 message pending interrupt */
+#define CAN_IT_FF0 ((uint32_t)CAN_IER_FFIE0) /*!< FIFO 0 full interrupt */
+#define CAN_IT_FOV0 ((uint32_t)CAN_IER_FOVIE0) /*!< FIFO 0 overrun interrupt */
+#define CAN_IT_FMP1 ((uint32_t)CAN_IER_FMPIE1) /*!< FIFO 1 message pending interrupt */
+#define CAN_IT_FF1 ((uint32_t)CAN_IER_FFIE1) /*!< FIFO 1 full interrupt */
+#define CAN_IT_FOV1 ((uint32_t)CAN_IER_FOVIE1) /*!< FIFO 1 overrun interrupt */
+
+/* Operating Mode Interrupts */
+#define CAN_IT_WKU ((uint32_t)CAN_IER_WKUIE) /*!< Wake-up interrupt */
+#define CAN_IT_SLK ((uint32_t)CAN_IER_SLKIE) /*!< Sleep acknowledge interrupt */
+
+/* Error Interrupts */
+#define CAN_IT_EWG ((uint32_t)CAN_IER_EWGIE) /*!< Error warning interrupt */
+#define CAN_IT_EPV ((uint32_t)CAN_IER_EPVIE) /*!< Error passive interrupt */
+#define CAN_IT_BOF ((uint32_t)CAN_IER_BOFIE) /*!< Bus-off interrupt */
+#define CAN_IT_LEC ((uint32_t)CAN_IER_LECIE) /*!< Last error code interrupt */
+#define CAN_IT_ERR ((uint32_t)CAN_IER_ERRIE) /*!< Error Interrupt */
+
+/**
+ * @}
+ */
+
+/** @defgroup CAN_Mailboxes CAN Mailboxes
+* @{
+*/
+/* Mailboxes definition */
+#define CAN_TXMAILBOX_0 ((uint8_t)0x00U)
+#define CAN_TXMAILBOX_1 ((uint8_t)0x01U)
+#define CAN_TXMAILBOX_2 ((uint8_t)0x02U)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup CAN_Exported_Macros CAN Exported Macros
+ * @{
+ */
+
+/** @brief Reset CAN handle state
+ * @param __HANDLE__ CAN handle.
+ * @retval None
+ */
+#define __HAL_CAN_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CAN_STATE_RESET)
+
+/**
+ * @brief Enable the specified CAN interrupts.
+ * @param __HANDLE__ CAN handle.
+ * @param __INTERRUPT__ CAN Interrupt
+ * @retval None
+ */
+#define __HAL_CAN_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IER) |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the specified CAN interrupts.
+ * @param __HANDLE__ CAN handle.
+ * @param __INTERRUPT__ CAN Interrupt
+ * @retval None
+ */
+#define __HAL_CAN_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IER) &= ~(__INTERRUPT__))
+
+/**
+ * @brief Return the number of pending received messages.
+ * @param __HANDLE__ CAN handle.
+ * @param __FIFONUMBER__ Receive FIFO number, CAN_FIFO0 or CAN_FIFO1.
+ * @retval The number of pending message.
+ */
+#define __HAL_CAN_MSG_PENDING(__HANDLE__, __FIFONUMBER__) (((__FIFONUMBER__) == CAN_FIFO0)? \
+((uint8_t)((__HANDLE__)->Instance->RF0R&0x03U)) : ((uint8_t)((__HANDLE__)->Instance->RF1R&0x03U)))
+
+/** @brief Check whether the specified CAN flag is set or not.
+ * @param __HANDLE__ specifies the CAN Handle.
+ * @param __FLAG__ specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg CAN_TSR_RQCP0: Request MailBox0 Flag
+ * @arg CAN_TSR_RQCP1: Request MailBox1 Flag
+ * @arg CAN_TSR_RQCP2: Request MailBox2 Flag
+ * @arg CAN_FLAG_TXOK0: Transmission OK MailBox0 Flag
+ * @arg CAN_FLAG_TXOK1: Transmission OK MailBox1 Flag
+ * @arg CAN_FLAG_TXOK2: Transmission OK MailBox2 Flag
+ * @arg CAN_FLAG_TME0: Transmit mailbox 0 empty Flag
+ * @arg CAN_FLAG_TME1: Transmit mailbox 1 empty Flag
+ * @arg CAN_FLAG_TME2: Transmit mailbox 2 empty Flag
+ * @arg CAN_FLAG_FMP0: FIFO 0 Message Pending Flag
+ * @arg CAN_FLAG_FF0: FIFO 0 Full Flag
+ * @arg CAN_FLAG_FOV0: FIFO 0 Overrun Flag
+ * @arg CAN_FLAG_FMP1: FIFO 1 Message Pending Flag
+ * @arg CAN_FLAG_FF1: FIFO 1 Full Flag
+ * @arg CAN_FLAG_FOV1: FIFO 1 Overrun Flag
+ * @arg CAN_FLAG_WKU: Wake up Flag
+ * @arg CAN_FLAG_SLAK: Sleep acknowledge Flag
+ * @arg CAN_FLAG_SLAKI: Sleep acknowledge Flag
+ * @arg CAN_FLAG_EWG: Error Warning Flag
+ * @arg CAN_FLAG_EPV: Error Passive Flag
+ * @arg CAN_FLAG_BOF: Bus-Off Flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_CAN_GET_FLAG(__HANDLE__, __FLAG__) \
+((((__FLAG__) >> 8U) == 5U)? ((((__HANDLE__)->Instance->TSR) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__FLAG__) >> 8U) == 2U)? ((((__HANDLE__)->Instance->RF0R) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__FLAG__) >> 8U) == 4U)? ((((__HANDLE__)->Instance->RF1R) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__FLAG__) >> 8U) == 1U)? ((((__HANDLE__)->Instance->MSR) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
+ ((((__HANDLE__)->Instance->ESR) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))))
+
+/** @brief Clear the specified CAN pending flag.
+ * @param __HANDLE__ specifies the CAN Handle.
+ * @param __FLAG__ specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg CAN_TSR_RQCP0: Request MailBox0 Flag
+ * @arg CAN_TSR_RQCP1: Request MailBox1 Flag
+ * @arg CAN_TSR_RQCP2: Request MailBox2 Flag
+ * @arg CAN_FLAG_TXOK0: Transmission OK MailBox0 Flag
+ * @arg CAN_FLAG_TXOK1: Transmission OK MailBox1 Flag
+ * @arg CAN_FLAG_TXOK2: Transmission OK MailBox2 Flag
+ * @arg CAN_FLAG_TME0: Transmit mailbox 0 empty Flag
+ * @arg CAN_FLAG_TME1: Transmit mailbox 1 empty Flag
+ * @arg CAN_FLAG_TME2: Transmit mailbox 2 empty Flag
+ * @arg CAN_FLAG_FMP0: FIFO 0 Message Pending Flag
+ * @arg CAN_FLAG_FF0: FIFO 0 Full Flag
+ * @arg CAN_FLAG_FOV0: FIFO 0 Overrun Flag
+ * @arg CAN_FLAG_FMP1: FIFO 1 Message Pending Flag
+ * @arg CAN_FLAG_FF1: FIFO 1 Full Flag
+ * @arg CAN_FLAG_FOV1: FIFO 1 Overrun Flag
+ * @arg CAN_FLAG_WKU: Wake up Flag
+ * @arg CAN_FLAG_SLAKI: Sleep acknowledge Flag
+ * @arg CAN_FLAG_EWG: Error Warning Flag
+ * @arg CAN_FLAG_EPV: Error Passive Flag
+ * @arg CAN_FLAG_BOF: Bus-Off Flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_CAN_CLEAR_FLAG(__HANDLE__, __FLAG__) \
+((((__FLAG__) >> 8U) == 5U)? (((__HANDLE__)->Instance->TSR) = (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__FLAG__) >> 8U) == 2U)? (((__HANDLE__)->Instance->RF0R) = (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__FLAG__) >> 8U) == 4U)? (((__HANDLE__)->Instance->RF1R) = (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__FLAG__) >> 8U) == 1U)? (((__HANDLE__)->Instance->MSR) = (1U << ((__FLAG__) & CAN_FLAG_MASK))): 0U)
+
+
+/** @brief Check if the specified CAN interrupt source is enabled or disabled.
+ * @param __HANDLE__ specifies the CAN Handle.
+ * @param __INTERRUPT__ specifies the CAN interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg CAN_IT_TME: Transmit mailbox empty interrupt enable
+ * @arg CAN_IT_FMP0: FIFO0 message pending interrupt enablev
+ * @arg CAN_IT_FMP1: FIFO1 message pending interrupt enable
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_CAN_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->IER & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/**
+ * @brief Check the transmission status of a CAN Frame.
+ * @param __HANDLE__ CAN handle.
+ * @param __TRANSMITMAILBOX__ the number of the mailbox that is used for transmission.
+ * @retval The new status of transmission (TRUE or FALSE).
+ */
+#define __HAL_CAN_TRANSMIT_STATUS(__HANDLE__, __TRANSMITMAILBOX__)\
+(((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_0)? ((((__HANDLE__)->Instance->TSR) & (CAN_TSR_RQCP0 | CAN_TSR_TME0)) == (CAN_TSR_RQCP0 | CAN_TSR_TME0)) :\
+ ((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_1)? ((((__HANDLE__)->Instance->TSR) & (CAN_TSR_RQCP1 | CAN_TSR_TME1)) == (CAN_TSR_RQCP1 | CAN_TSR_TME1)) :\
+ ((((__HANDLE__)->Instance->TSR) & (CAN_TSR_RQCP2 | CAN_TSR_TME2)) == (CAN_TSR_RQCP2 | CAN_TSR_TME2)))
+
+ /**
+ * @brief Release the specified receive FIFO.
+ * @param __HANDLE__ CAN handle.
+ * @param __FIFONUMBER__ Receive FIFO number, CAN_FIFO0 or CAN_FIFO1.
+ * @retval None
+ */
+#define __HAL_CAN_FIFO_RELEASE(__HANDLE__, __FIFONUMBER__) (((__FIFONUMBER__) == CAN_FIFO0)? \
+((__HANDLE__)->Instance->RF0R |= CAN_RF0R_RFOM0) : ((__HANDLE__)->Instance->RF1R |= CAN_RF1R_RFOM1))
+
+/**
+ * @brief Cancel a transmit request.
+ * @param __HANDLE__ specifies the CAN Handle.
+ * @param __TRANSMITMAILBOX__ the number of the mailbox that is used for transmission.
+ * @retval None
+ */
+#define __HAL_CAN_CANCEL_TRANSMIT(__HANDLE__, __TRANSMITMAILBOX__)\
+(((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_0)? ((__HANDLE__)->Instance->TSR |= CAN_TSR_ABRQ0) :\
+ ((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_1)? ((__HANDLE__)->Instance->TSR |= CAN_TSR_ABRQ1) :\
+ ((__HANDLE__)->Instance->TSR |= CAN_TSR_ABRQ2))
+
+/**
+ * @brief Enable or disables the DBG Freeze for CAN.
+ * @param __HANDLE__ specifies the CAN Handle.
+ * @param __NEWSTATE__ new state of the CAN peripheral.
+ * This parameter can be: ENABLE (CAN reception/transmission is frozen
+ * during debug. Reception FIFOs can still be accessed/controlled normally)
+ * or DISABLE (CAN is working during debug).
+ * @retval None
+ */
+#define __HAL_CAN_DBG_FREEZE(__HANDLE__, __NEWSTATE__) (((__NEWSTATE__) == ENABLE)? \
+((__HANDLE__)->Instance->MCR |= CAN_MCR_DBF) : ((__HANDLE__)->Instance->MCR &= ~CAN_MCR_DBF))
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup CAN_Exported_Functions CAN Exported Functions
+ * @{
+ */
+
+/** @addtogroup CAN_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ * @{
+ */
+
+/* Initialization and de-initialization functions *****************************/
+HAL_StatusTypeDef HAL_CAN_Init(CAN_HandleTypeDef* hcan);
+HAL_StatusTypeDef HAL_CAN_ConfigFilter(CAN_HandleTypeDef* hcan, CAN_FilterConfTypeDef* sFilterConfig);
+HAL_StatusTypeDef HAL_CAN_DeInit(CAN_HandleTypeDef* hcan);
+void HAL_CAN_MspInit(CAN_HandleTypeDef* hcan);
+void HAL_CAN_MspDeInit(CAN_HandleTypeDef* hcan);
+/**
+ * @}
+ */
+
+/** @addtogroup CAN_Exported_Functions_Group2 Input and Output operation functions
+ * @brief I/O operation functions
+ * @{
+ */
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_CAN_Transmit(CAN_HandleTypeDef *hcan, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CAN_Transmit_IT(CAN_HandleTypeDef *hcan);
+HAL_StatusTypeDef HAL_CAN_Receive(CAN_HandleTypeDef *hcan, uint8_t FIFONumber, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CAN_Receive_IT(CAN_HandleTypeDef *hcan, uint8_t FIFONumber);
+HAL_StatusTypeDef HAL_CAN_Sleep(CAN_HandleTypeDef *hcan);
+HAL_StatusTypeDef HAL_CAN_WakeUp(CAN_HandleTypeDef *hcan);
+void HAL_CAN_IRQHandler(CAN_HandleTypeDef* hcan);
+void HAL_CAN_TxCpltCallback(CAN_HandleTypeDef* hcan);
+void HAL_CAN_RxCpltCallback(CAN_HandleTypeDef* hcan);
+void HAL_CAN_ErrorCallback(CAN_HandleTypeDef *hcan);
+/**
+ * @}
+ */
+
+/** @addtogroup CAN_Exported_Functions_Group3 Peripheral State and Error functions
+ * @brief CAN Peripheral State functions
+ * @{
+ */
+/* Peripheral State and Error functions ***************************************/
+uint32_t HAL_CAN_GetError(CAN_HandleTypeDef *hcan);
+HAL_CAN_StateTypeDef HAL_CAN_GetState(CAN_HandleTypeDef* hcan);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/** @defgroup CAN_Private_Types CAN Private Types
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup CAN_Private_Variables CAN Private Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup CAN_Private_Constants CAN Private Constants
+ * @{
+ */
+#define CAN_TXSTATUS_NOMAILBOX ((uint8_t)0x04U) /*!< CAN cell did not provide CAN_TxStatus_NoMailBox */
+#define CAN_FLAG_MASK (0x000000FFU)
+/**
+ * @}
+ */
+
+/* Private Macros -----------------------------------------------------------*/
+/** @defgroup CAN_Private_Macros CAN Private Macros
+ * @{
+ */
+
+#define IS_CAN_MODE(MODE) (((MODE) == CAN_MODE_NORMAL) || \
+ ((MODE) == CAN_MODE_LOOPBACK)|| \
+ ((MODE) == CAN_MODE_SILENT) || \
+ ((MODE) == CAN_MODE_SILENT_LOOPBACK))
+
+#define IS_CAN_SJW(SJW) (((SJW) == CAN_SJW_1TQ) || ((SJW) == CAN_SJW_2TQ)|| \
+ ((SJW) == CAN_SJW_3TQ) || ((SJW) == CAN_SJW_4TQ))
+
+#define IS_CAN_BS1(BS1) ((BS1) <= CAN_BS1_16TQ)
+
+#define IS_CAN_BS2(BS2) ((BS2) <= CAN_BS2_8TQ)
+
+#define IS_CAN_PRESCALER(PRESCALER) (((PRESCALER) >= 1U) && ((PRESCALER) <= 1024U))
+
+#define IS_CAN_FILTER_NUMBER(NUMBER) ((NUMBER) <= 27U)
+
+#define IS_CAN_FILTER_MODE(MODE) (((MODE) == CAN_FILTERMODE_IDMASK) || \
+ ((MODE) == CAN_FILTERMODE_IDLIST))
+
+#define IS_CAN_FILTER_SCALE(SCALE) (((SCALE) == CAN_FILTERSCALE_16BIT) || \
+ ((SCALE) == CAN_FILTERSCALE_32BIT))
+
+#define IS_CAN_FILTER_FIFO(FIFO) (((FIFO) == CAN_FILTER_FIFO0) || \
+ ((FIFO) == CAN_FILTER_FIFO1))
+
+#define IS_CAN_BANKNUMBER(BANKNUMBER) ((BANKNUMBER) <= 28U)
+
+#define IS_CAN_TRANSMITMAILBOX(TRANSMITMAILBOX) ((TRANSMITMAILBOX) <= ((uint8_t)0x02U))
+#define IS_CAN_STDID(STDID) ((STDID) <= (0x7FFU))
+#define IS_CAN_EXTID(EXTID) ((EXTID) <= (0x1FFFFFFFU))
+#define IS_CAN_DLC(DLC) ((DLC) <= ((uint8_t)0x08U))
+
+#define IS_CAN_IDTYPE(IDTYPE) (((IDTYPE) == CAN_ID_STD) || \
+ ((IDTYPE) == CAN_ID_EXT))
+
+#define IS_CAN_RTR(RTR) (((RTR) == CAN_RTR_DATA) || ((RTR) == CAN_RTR_REMOTE))
+
+#define IS_CAN_FIFO(FIFO) (((FIFO) == CAN_FIFO0) || ((FIFO) == CAN_FIFO1))
+
+#define IS_CAN_IT(IT) (((IT) == CAN_IT_TME) || ((IT) == CAN_IT_FMP0) ||\
+ ((IT) == CAN_IT_FF0) || ((IT) == CAN_IT_FOV0) ||\
+ ((IT) == CAN_IT_FMP1) || ((IT) == CAN_IT_FF1) ||\
+ ((IT) == CAN_IT_FOV1) || ((IT) == CAN_IT_EWG) ||\
+ ((IT) == CAN_IT_EPV) || ((IT) == CAN_IT_BOF) ||\
+ ((IT) == CAN_IT_LEC) || ((IT) == CAN_IT_ERR) ||\
+ ((IT) == CAN_IT_WKU) || ((IT) == CAN_IT_SLK))
+
+#define IS_CAN_CLEAR_IT(IT) (((IT) == CAN_IT_TME) || ((IT) == CAN_IT_FF0) ||\
+ ((IT) == CAN_IT_FOV0)|| ((IT) == CAN_IT_FF1) ||\
+ ((IT) == CAN_IT_FOV1)|| ((IT) == CAN_IT_EWG) ||\
+ ((IT) == CAN_IT_EPV) || ((IT) == CAN_IT_BOF) ||\
+ ((IT) == CAN_IT_LEC) || ((IT) == CAN_IT_ERR) ||\
+ ((IT) == CAN_IT_WKU) || ((IT) == CAN_IT_SLK))
+
+/**
+ * @}
+ */
+/* End of private macros -----------------------------------------------------*/
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F072xB || STM32F042x6 || STM32F048xx || STM32F078xx || STM32F091xC || STM32F098xx */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_CAN_LEGACY_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32_assert_template.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32_assert_template.h
new file mode 100644
index 0000000..26110e6
--- /dev/null
+++ b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32_assert_template.h
@@ -0,0 +1,57 @@
+/**
+ ******************************************************************************
+ * @file stm32_assert.h
+ * @author MCD Application Team
+ * @brief STM32 assert template file.
+ * This file should be copied to the application folder and renamed
+ * to stm32_assert.h.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32_ASSERT_H
+#define __STM32_ASSERT_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Includes ------------------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+#ifdef USE_FULL_ASSERT
+/**
+ * @brief The assert_param macro is used for function's parameters check.
+ * @param expr If expr is false, it calls assert_failed function
+ * which reports the name of the source file and the source
+ * line number of the call that failed.
+ * If expr is true, it returns no value.
+ * @retval None
+ */
+ #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+ void assert_failed(uint8_t* file, uint32_t line);
+#else
+ #define assert_param(expr) ((void)0U)
+#endif /* USE_FULL_ASSERT */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32_ASSERT_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h
new file mode 100644
index 0000000..a100055
--- /dev/null
+++ b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal.h
@@ -0,0 +1,585 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal.h
+ * @author MCD Application Team
+ * @brief This file contains all the functions prototypes for the HAL
+ * module driver.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_H
+#define __STM32F0xx_HAL_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_conf.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup HAL
+ * @{
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @addtogroup HAL_Private_Macros
+ * @{
+ */
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F042x6) || defined(STM32F048xx) || \
+ defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx) || defined(STM32F070x6) || \
+ defined(STM32F070xB) || defined(STM32F030x6)
+#define IS_SYSCFG_FASTMODEPLUS(__PIN__) ((((__PIN__) & SYSCFG_FASTMODEPLUS_PA9) == SYSCFG_FASTMODEPLUS_PA9) || \
+ (((__PIN__) & SYSCFG_FASTMODEPLUS_PA10) == SYSCFG_FASTMODEPLUS_PA10) || \
+ (((__PIN__) & SYSCFG_FASTMODEPLUS_PB6) == SYSCFG_FASTMODEPLUS_PB6) || \
+ (((__PIN__) & SYSCFG_FASTMODEPLUS_PB7) == SYSCFG_FASTMODEPLUS_PB7) || \
+ (((__PIN__) & SYSCFG_FASTMODEPLUS_PB8) == SYSCFG_FASTMODEPLUS_PB8) || \
+ (((__PIN__) & SYSCFG_FASTMODEPLUS_PB9) == SYSCFG_FASTMODEPLUS_PB9))
+#else
+#define IS_SYSCFG_FASTMODEPLUS(__PIN__) ((((__PIN__) & SYSCFG_FASTMODEPLUS_PB6) == SYSCFG_FASTMODEPLUS_PB6) || \
+ (((__PIN__) & SYSCFG_FASTMODEPLUS_PB7) == SYSCFG_FASTMODEPLUS_PB7) || \
+ (((__PIN__) & SYSCFG_FASTMODEPLUS_PB8) == SYSCFG_FASTMODEPLUS_PB8) || \
+ (((__PIN__) & SYSCFG_FASTMODEPLUS_PB9) == SYSCFG_FASTMODEPLUS_PB9))
+#endif
+#if defined(SYSCFG_CFGR1_PA11_PA12_RMP)
+#define IS_HAL_REMAP_PIN(RMP) ((RMP) == HAL_REMAP_PA11_PA12)
+#endif /* SYSCFG_CFGR1_PA11_PA12_RMP */
+#if defined(STM32F091xC) || defined(STM32F098xx)
+#define IS_HAL_SYSCFG_IRDA_ENV_SEL(SEL) (((SEL) == HAL_SYSCFG_IRDA_ENV_SEL_TIM16) || \
+ ((SEL) == HAL_SYSCFG_IRDA_ENV_SEL_USART1) || \
+ ((SEL) == HAL_SYSCFG_IRDA_ENV_SEL_USART4))
+#endif /* STM32F091xC || STM32F098xx */
+/**
+ * @}
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup HAL_Exported_Constants HAL Exported Constants
+ * @{
+ */
+
+/** @defgroup HAL_TICK_FREQ Tick Frequency
+ * @{
+ */
+typedef enum
+{
+ HAL_TICK_FREQ_10HZ = 100U,
+ HAL_TICK_FREQ_100HZ = 10U,
+ HAL_TICK_FREQ_1KHZ = 1U,
+ HAL_TICK_FREQ_DEFAULT = HAL_TICK_FREQ_1KHZ
+} HAL_TickFreqTypeDef;
+
+/**
+ * @}
+ */
+
+#if defined(SYSCFG_CFGR1_PA11_PA12_RMP)
+/** @defgroup HAL_Pin_remapping HAL Pin remapping
+ * @{
+ */
+#define HAL_REMAP_PA11_PA12 (SYSCFG_CFGR1_PA11_PA12_RMP) /*!< PA11 and PA12 remapping bit for small packages (28 and 20 pins).
+ 0: No remap (pin pair PA9/10 mapped on the pins)
+ 1: Remap (pin pair PA11/12 mapped instead of PA9/10) */
+
+/**
+ * @}
+ */
+#endif /* SYSCFG_CFGR1_PA11_PA12_RMP */
+
+#if defined(STM32F091xC) || defined(STM32F098xx)
+/** @defgroup HAL_IRDA_ENV_SEL HAL IRDA Enveloppe Selection
+ * @note Applicable on STM32F09x
+ * @{
+ */
+#define HAL_SYSCFG_IRDA_ENV_SEL_TIM16 (SYSCFG_CFGR1_IRDA_ENV_SEL_0 & SYSCFG_CFGR1_IRDA_ENV_SEL_1) /* 00: Timer16 is selected as IRDA Modulation enveloppe source */
+#define HAL_SYSCFG_IRDA_ENV_SEL_USART1 (SYSCFG_CFGR1_IRDA_ENV_SEL_0) /* 01: USART1 is selected as IRDA Modulation enveloppe source */
+#define HAL_SYSCFG_IRDA_ENV_SEL_USART4 (SYSCFG_CFGR1_IRDA_ENV_SEL_1) /* 10: USART4 is selected as IRDA Modulation enveloppe source */
+
+/**
+ * @}
+ */
+#endif /* STM32F091xC || STM32F098xx */
+
+
+/** @defgroup SYSCFG_FastModePlus_GPIO Fast-mode Plus on GPIO
+ * @{
+ */
+
+/** @brief Fast-mode Plus driving capability on a specific GPIO
+ */
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F042x6) || defined(STM32F048xx) || \
+ defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx) || defined(STM32F070x6) || \
+ defined(STM32F070xB) || defined(STM32F030x6)
+#define SYSCFG_FASTMODEPLUS_PA9 SYSCFG_CFGR1_I2C_FMP_PA9 /*!< Enable Fast-mode Plus on PA9 */
+#define SYSCFG_FASTMODEPLUS_PA10 SYSCFG_CFGR1_I2C_FMP_PA10 /*!< Enable Fast-mode Plus on PA10 */
+#endif
+#define SYSCFG_FASTMODEPLUS_PB6 SYSCFG_CFGR1_I2C_FMP_PB6 /*!< Enable Fast-mode Plus on PB6 */
+#define SYSCFG_FASTMODEPLUS_PB7 SYSCFG_CFGR1_I2C_FMP_PB7 /*!< Enable Fast-mode Plus on PB7 */
+#define SYSCFG_FASTMODEPLUS_PB8 SYSCFG_CFGR1_I2C_FMP_PB8 /*!< Enable Fast-mode Plus on PB8 */
+#define SYSCFG_FASTMODEPLUS_PB9 SYSCFG_CFGR1_I2C_FMP_PB9 /*!< Enable Fast-mode Plus on PB9 */
+
+/**
+ * @}
+ */
+
+
+#if defined(STM32F091xC) || defined (STM32F098xx)
+/** @defgroup HAL_ISR_Wrapper HAL ISR Wrapper
+ * @brief ISR Wrapper
+ * @note applicable on STM32F09x
+ * @{
+ */
+#define HAL_SYSCFG_ITLINE0 ( 0x00000000U) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE1 ( 0x00000001U) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE2 ( 0x00000002U) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE3 ( 0x00000003U) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE4 ( 0x00000004U) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE5 ( 0x00000005U) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE6 ( 0x00000006U) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE7 ( 0x00000007U) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE8 ( 0x00000008U) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE9 ( 0x00000009U) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE10 ( 0x0000000AU) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE11 ( 0x0000000BU) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE12 ( 0x0000000CU) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE13 ( 0x0000000DU) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE14 ( 0x0000000EU) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE15 ( 0x0000000FU) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE16 ( 0x00000010U) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE17 ( 0x00000011U) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE18 ( 0x00000012U) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE19 ( 0x00000013U) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE20 ( 0x00000014U) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE21 ( 0x00000015U) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE22 ( 0x00000016U) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE23 ( 0x00000017U) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE24 ( 0x00000018U) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE25 ( 0x00000019U) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE26 ( 0x0000001AU) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE27 ( 0x0000001BU) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE28 ( 0x0000001CU) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE29 ( 0x0000001DU) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE30 ( 0x0000001EU) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE31 ( 0x0000001FU) /*!< Internal define for macro handling */
+
+#define HAL_ITLINE_EWDG ((uint32_t) ((HAL_SYSCFG_ITLINE0 << 0x18U) | SYSCFG_ITLINE0_SR_EWDG)) /*!< EWDG has expired .... */
+#if defined(STM32F091xC)
+#define HAL_ITLINE_PVDOUT ((uint32_t) ((HAL_SYSCFG_ITLINE1 << 0x18U) | SYSCFG_ITLINE1_SR_PVDOUT)) /*!< Power voltage detection Interrupt .... */
+#endif
+#define HAL_ITLINE_VDDIO2 ((uint32_t) ((HAL_SYSCFG_ITLINE1 << 0x18U) | SYSCFG_ITLINE1_SR_VDDIO2)) /*!< VDDIO2 Interrupt .... */
+#define HAL_ITLINE_RTC_WAKEUP ((uint32_t) ((HAL_SYSCFG_ITLINE2 << 0x18U) | SYSCFG_ITLINE2_SR_RTC_WAKEUP)) /*!< RTC WAKEUP -> exti[20] Interrupt */
+#define HAL_ITLINE_RTC_TSTAMP ((uint32_t) ((HAL_SYSCFG_ITLINE2 << 0x18U) | SYSCFG_ITLINE2_SR_RTC_TSTAMP)) /*!< RTC Time Stamp -> exti[19] interrupt */
+#define HAL_ITLINE_RTC_ALRA ((uint32_t) ((HAL_SYSCFG_ITLINE2 << 0x18U) | SYSCFG_ITLINE2_SR_RTC_ALRA)) /*!< RTC Alarm -> exti[17] interrupt .... */
+#define HAL_ITLINE_FLASH_ITF ((uint32_t) ((HAL_SYSCFG_ITLINE3 << 0x18U) | SYSCFG_ITLINE3_SR_FLASH_ITF)) /*!< Flash ITF Interrupt */
+#define HAL_ITLINE_CRS ((uint32_t) ((HAL_SYSCFG_ITLINE4 << 0x18U) | SYSCFG_ITLINE4_SR_CRS)) /*!< CRS Interrupt */
+#define HAL_ITLINE_CLK_CTRL ((uint32_t) ((HAL_SYSCFG_ITLINE4 << 0x18U) | SYSCFG_ITLINE4_SR_CLK_CTRL)) /*!< CLK Control Interrupt */
+#define HAL_ITLINE_EXTI0 ((uint32_t) ((HAL_SYSCFG_ITLINE5 << 0x18U) | SYSCFG_ITLINE5_SR_EXTI0)) /*!< External Interrupt 0 */
+#define HAL_ITLINE_EXTI1 ((uint32_t) ((HAL_SYSCFG_ITLINE5 << 0x18U) | SYSCFG_ITLINE5_SR_EXTI1)) /*!< External Interrupt 1 */
+#define HAL_ITLINE_EXTI2 ((uint32_t) ((HAL_SYSCFG_ITLINE6 << 0x18U) | SYSCFG_ITLINE6_SR_EXTI2)) /*!< External Interrupt 2 */
+#define HAL_ITLINE_EXTI3 ((uint32_t) ((HAL_SYSCFG_ITLINE6 << 0x18U) | SYSCFG_ITLINE6_SR_EXTI3)) /*!< External Interrupt 3 */
+#define HAL_ITLINE_EXTI4 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI4)) /*!< EXTI4 Interrupt */
+#define HAL_ITLINE_EXTI5 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI5)) /*!< EXTI5 Interrupt */
+#define HAL_ITLINE_EXTI6 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI6)) /*!< EXTI6 Interrupt */
+#define HAL_ITLINE_EXTI7 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI7)) /*!< EXTI7 Interrupt */
+#define HAL_ITLINE_EXTI8 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI8)) /*!< EXTI8 Interrupt */
+#define HAL_ITLINE_EXTI9 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI9)) /*!< EXTI9 Interrupt */
+#define HAL_ITLINE_EXTI10 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI10)) /*!< EXTI10 Interrupt */
+#define HAL_ITLINE_EXTI11 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI11)) /*!< EXTI11 Interrupt */
+#define HAL_ITLINE_EXTI12 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI12)) /*!< EXTI12 Interrupt */
+#define HAL_ITLINE_EXTI13 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI13)) /*!< EXTI13 Interrupt */
+#define HAL_ITLINE_EXTI14 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI14)) /*!< EXTI14 Interrupt */
+#define HAL_ITLINE_EXTI15 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18U) | SYSCFG_ITLINE7_SR_EXTI15)) /*!< EXTI15 Interrupt */
+#define HAL_ITLINE_TSC_EOA ((uint32_t) ((HAL_SYSCFG_ITLINE8 << 0x18U) | SYSCFG_ITLINE8_SR_TSC_EOA)) /*!< Touch control EOA Interrupt */
+#define HAL_ITLINE_TSC_MCE ((uint32_t) ((HAL_SYSCFG_ITLINE8 << 0x18U) | SYSCFG_ITLINE8_SR_TSC_MCE)) /*!< Touch control MCE Interrupt */
+#define HAL_ITLINE_DMA1_CH1 ((uint32_t) ((HAL_SYSCFG_ITLINE9 << 0x18U) | SYSCFG_ITLINE9_SR_DMA1_CH1)) /*!< DMA1 Channel 1 Interrupt */
+#define HAL_ITLINE_DMA1_CH2 ((uint32_t) ((HAL_SYSCFG_ITLINE10 << 0x18U) | SYSCFG_ITLINE10_SR_DMA1_CH2)) /*!< DMA1 Channel 2 Interrupt */
+#define HAL_ITLINE_DMA1_CH3 ((uint32_t) ((HAL_SYSCFG_ITLINE10 << 0x18U) | SYSCFG_ITLINE10_SR_DMA1_CH3)) /*!< DMA1 Channel 3 Interrupt */
+#define HAL_ITLINE_DMA2_CH1 ((uint32_t) ((HAL_SYSCFG_ITLINE10 << 0x18U) | SYSCFG_ITLINE10_SR_DMA2_CH1)) /*!< DMA2 Channel 1 Interrupt */
+#define HAL_ITLINE_DMA2_CH2 ((uint32_t) ((HAL_SYSCFG_ITLINE10 << 0x18U) | SYSCFG_ITLINE10_SR_DMA2_CH2)) /*!< DMA2 Channel 2 Interrupt */
+#define HAL_ITLINE_DMA1_CH4 ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMA1_CH4)) /*!< DMA1 Channel 4 Interrupt */
+#define HAL_ITLINE_DMA1_CH5 ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMA1_CH5)) /*!< DMA1 Channel 5 Interrupt */
+#define HAL_ITLINE_DMA1_CH6 ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMA1_CH6)) /*!< DMA1 Channel 6 Interrupt */
+#define HAL_ITLINE_DMA1_CH7 ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMA1_CH7)) /*!< DMA1 Channel 7 Interrupt */
+#define HAL_ITLINE_DMA2_CH3 ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMA2_CH3)) /*!< DMA2 Channel 3 Interrupt */
+#define HAL_ITLINE_DMA2_CH4 ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMA2_CH4)) /*!< DMA2 Channel 4 Interrupt */
+#define HAL_ITLINE_DMA2_CH5 ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18U) | SYSCFG_ITLINE11_SR_DMA2_CH5)) /*!< DMA2 Channel 5 Interrupt */
+#define HAL_ITLINE_ADC ((uint32_t) ((HAL_SYSCFG_ITLINE12 << 0x18U) | SYSCFG_ITLINE12_SR_ADC)) /*!< ADC Interrupt */
+#define HAL_ITLINE_COMP1 ((uint32_t) ((HAL_SYSCFG_ITLINE12 << 0x18U) | SYSCFG_ITLINE12_SR_COMP1)) /*!< COMP1 Interrupt -> exti[21] */
+#define HAL_ITLINE_COMP2 ((uint32_t) ((HAL_SYSCFG_ITLINE12 << 0x18U) | SYSCFG_ITLINE12_SR_COMP2)) /*!< COMP2 Interrupt -> exti[21] */
+#define HAL_ITLINE_TIM1_BRK ((uint32_t) ((HAL_SYSCFG_ITLINE13 << 0x18U) | SYSCFG_ITLINE13_SR_TIM1_BRK)) /*!< TIM1 BRK Interrupt */
+#define HAL_ITLINE_TIM1_UPD ((uint32_t) ((HAL_SYSCFG_ITLINE13 << 0x18U) | SYSCFG_ITLINE13_SR_TIM1_UPD)) /*!< TIM1 UPD Interrupt */
+#define HAL_ITLINE_TIM1_TRG ((uint32_t) ((HAL_SYSCFG_ITLINE13 << 0x18U) | SYSCFG_ITLINE13_SR_TIM1_TRG)) /*!< TIM1 TRG Interrupt */
+#define HAL_ITLINE_TIM1_CCU ((uint32_t) ((HAL_SYSCFG_ITLINE13 << 0x18U) | SYSCFG_ITLINE13_SR_TIM1_CCU)) /*!< TIM1 CCU Interrupt */
+#define HAL_ITLINE_TIM1_CC ((uint32_t) ((HAL_SYSCFG_ITLINE14 << 0x18U) | SYSCFG_ITLINE14_SR_TIM1_CC)) /*!< TIM1 CC Interrupt */
+#define HAL_ITLINE_TIM2 ((uint32_t) ((HAL_SYSCFG_ITLINE15 << 0x18U) | SYSCFG_ITLINE15_SR_TIM2_GLB)) /*!< TIM2 Interrupt */
+#define HAL_ITLINE_TIM3 ((uint32_t) ((HAL_SYSCFG_ITLINE16 << 0x18U) | SYSCFG_ITLINE16_SR_TIM3_GLB)) /*!< TIM3 Interrupt */
+#define HAL_ITLINE_DAC ((uint32_t) ((HAL_SYSCFG_ITLINE17 << 0x18U) | SYSCFG_ITLINE17_SR_DAC)) /*!< DAC Interrupt */
+#define HAL_ITLINE_TIM6 ((uint32_t) ((HAL_SYSCFG_ITLINE17 << 0x18U) | SYSCFG_ITLINE17_SR_TIM6_GLB)) /*!< TIM6 Interrupt */
+#define HAL_ITLINE_TIM7 ((uint32_t) ((HAL_SYSCFG_ITLINE18 << 0x18U) | SYSCFG_ITLINE18_SR_TIM7_GLB)) /*!< TIM7 Interrupt */
+#define HAL_ITLINE_TIM14 ((uint32_t) ((HAL_SYSCFG_ITLINE19 << 0x18U) | SYSCFG_ITLINE19_SR_TIM14_GLB)) /*!< TIM14 Interrupt */
+#define HAL_ITLINE_TIM15 ((uint32_t) ((HAL_SYSCFG_ITLINE20 << 0x18U) | SYSCFG_ITLINE20_SR_TIM15_GLB)) /*!< TIM15 Interrupt */
+#define HAL_ITLINE_TIM16 ((uint32_t) ((HAL_SYSCFG_ITLINE21 << 0x18U) | SYSCFG_ITLINE21_SR_TIM16_GLB)) /*!< TIM16 Interrupt */
+#define HAL_ITLINE_TIM17 ((uint32_t) ((HAL_SYSCFG_ITLINE22 << 0x18U) | SYSCFG_ITLINE22_SR_TIM17_GLB)) /*!< TIM17 Interrupt */
+#define HAL_ITLINE_I2C1 ((uint32_t) ((HAL_SYSCFG_ITLINE23 << 0x18U) | SYSCFG_ITLINE23_SR_I2C1_GLB)) /*!< I2C1 Interrupt -> exti[23] */
+#define HAL_ITLINE_I2C2 ((uint32_t) ((HAL_SYSCFG_ITLINE24 << 0x18U) | SYSCFG_ITLINE24_SR_I2C2_GLB)) /*!< I2C2 Interrupt */
+#define HAL_ITLINE_SPI1 ((uint32_t) ((HAL_SYSCFG_ITLINE25 << 0x18U) | SYSCFG_ITLINE25_SR_SPI1)) /*!< I2C1 Interrupt -> exti[23] */
+#define HAL_ITLINE_SPI2 ((uint32_t) ((HAL_SYSCFG_ITLINE26 << 0x18U) | SYSCFG_ITLINE26_SR_SPI2)) /*!< SPI1 Interrupt */
+#define HAL_ITLINE_USART1 ((uint32_t) ((HAL_SYSCFG_ITLINE27 << 0x18U) | SYSCFG_ITLINE27_SR_USART1_GLB)) /*!< USART1 GLB Interrupt -> exti[25] */
+#define HAL_ITLINE_USART2 ((uint32_t) ((HAL_SYSCFG_ITLINE28 << 0x18U) | SYSCFG_ITLINE28_SR_USART2_GLB)) /*!< USART2 GLB Interrupt -> exti[26] */
+#define HAL_ITLINE_USART3 ((uint32_t) ((HAL_SYSCFG_ITLINE29 << 0x18U) | SYSCFG_ITLINE29_SR_USART3_GLB)) /*!< USART3 Interrupt .... */
+#define HAL_ITLINE_USART4 ((uint32_t) ((HAL_SYSCFG_ITLINE29 << 0x18U) | SYSCFG_ITLINE29_SR_USART4_GLB)) /*!< USART4 Interrupt .... */
+#define HAL_ITLINE_USART5 ((uint32_t) ((HAL_SYSCFG_ITLINE29 << 0x18U) | SYSCFG_ITLINE29_SR_USART5_GLB)) /*!< USART5 Interrupt .... */
+#define HAL_ITLINE_USART6 ((uint32_t) ((HAL_SYSCFG_ITLINE29 << 0x18U) | SYSCFG_ITLINE29_SR_USART6_GLB)) /*!< USART6 Interrupt .... */
+#define HAL_ITLINE_USART7 ((uint32_t) ((HAL_SYSCFG_ITLINE29 << 0x18U) | SYSCFG_ITLINE29_SR_USART7_GLB)) /*!< USART7 Interrupt .... */
+#define HAL_ITLINE_USART8 ((uint32_t) ((HAL_SYSCFG_ITLINE29 << 0x18U) | SYSCFG_ITLINE29_SR_USART8_GLB)) /*!< USART8 Interrupt .... */
+#define HAL_ITLINE_CAN ((uint32_t) ((HAL_SYSCFG_ITLINE30 << 0x18U) | SYSCFG_ITLINE30_SR_CAN)) /*!< CAN Interrupt */
+#define HAL_ITLINE_CEC ((uint32_t) ((HAL_SYSCFG_ITLINE30 << 0x18U) | SYSCFG_ITLINE30_SR_CEC)) /*!< CEC Interrupt -> exti[27] */
+/**
+ * @}
+ */
+#endif /* STM32F091xC || STM32F098xx */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup HAL_Exported_Macros HAL Exported Macros
+ * @{
+ */
+
+/** @defgroup HAL_Freeze_Unfreeze_Peripherals HAL Freeze Unfreeze Peripherals
+ * @brief Freeze/Unfreeze Peripherals in Debug mode
+ * @{
+ */
+
+#if defined(DBGMCU_APB1_FZ_DBG_CAN_STOP)
+#define __HAL_FREEZE_CAN_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_CAN_STOP))
+#define __HAL_UNFREEZE_CAN_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_CAN_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_CAN_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_RTC_STOP)
+#define __HAL_DBGMCU_FREEZE_RTC() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_RTC_STOP))
+#define __HAL_DBGMCU_UNFREEZE_RTC() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_RTC_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_RTC_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT)
+#define __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT))
+#define __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT))
+#endif /* DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT */
+
+#if defined(DBGMCU_APB1_FZ_DBG_IWDG_STOP)
+#define __HAL_DBGMCU_FREEZE_IWDG() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_IWDG_STOP))
+#define __HAL_DBGMCU_UNFREEZE_IWDG() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_IWDG_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_IWDG_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_WWDG_STOP)
+#define __HAL_DBGMCU_FREEZE_WWDG() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_WWDG_STOP))
+#define __HAL_DBGMCU_UNFREEZE_WWDG() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_WWDG_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_WWDG_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_TIM2_STOP)
+#define __HAL_DBGMCU_FREEZE_TIM2() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM2_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM2() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM2_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_TIM2_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_TIM3_STOP)
+#define __HAL_DBGMCU_FREEZE_TIM3() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM3_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM3() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM3_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_TIM3_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_TIM6_STOP)
+#define __HAL_DBGMCU_FREEZE_TIM6() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM6_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM6() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM6_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_TIM6_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_TIM7_STOP)
+#define __HAL_DBGMCU_FREEZE_TIM7() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM7_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM7() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM7_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_TIM7_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_TIM14_STOP)
+#define __HAL_DBGMCU_FREEZE_TIM14() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM14_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM14() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM14_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_TIM14_STOP */
+
+#if defined(DBGMCU_APB2_FZ_DBG_TIM1_STOP)
+#define __HAL_DBGMCU_FREEZE_TIM1() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM1_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM1() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM1_STOP))
+#endif /* DBGMCU_APB2_FZ_DBG_TIM1_STOP */
+
+#if defined(DBGMCU_APB2_FZ_DBG_TIM15_STOP)
+#define __HAL_DBGMCU_FREEZE_TIM15() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM15_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM15() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM15_STOP))
+#endif /* DBGMCU_APB2_FZ_DBG_TIM15_STOP */
+
+#if defined(DBGMCU_APB2_FZ_DBG_TIM16_STOP)
+#define __HAL_DBGMCU_FREEZE_TIM16() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM16_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM16() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM16_STOP))
+#endif /* DBGMCU_APB2_FZ_DBG_TIM16_STOP */
+
+#if defined(DBGMCU_APB2_FZ_DBG_TIM17_STOP)
+#define __HAL_DBGMCU_FREEZE_TIM17() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM17_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM17() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM17_STOP))
+#endif /* DBGMCU_APB2_FZ_DBG_TIM17_STOP */
+
+/**
+ * @}
+ */
+
+/** @defgroup Memory_Mapping_Selection Memory Mapping Selection
+ * @{
+ */
+#if defined(SYSCFG_CFGR1_MEM_MODE)
+/** @brief Main Flash memory mapped at 0x00000000
+ */
+#define __HAL_SYSCFG_REMAPMEMORY_FLASH() (SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_MEM_MODE))
+#endif /* SYSCFG_CFGR1_MEM_MODE */
+
+#if defined(SYSCFG_CFGR1_MEM_MODE_0)
+/** @brief System Flash memory mapped at 0x00000000
+ */
+#define __HAL_SYSCFG_REMAPMEMORY_SYSTEMFLASH() do {SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_MEM_MODE); \
+ SYSCFG->CFGR1 |= SYSCFG_CFGR1_MEM_MODE_0; \
+ }while(0)
+#endif /* SYSCFG_CFGR1_MEM_MODE_0 */
+
+#if defined(SYSCFG_CFGR1_MEM_MODE_0) && defined(SYSCFG_CFGR1_MEM_MODE_1)
+/** @brief Embedded SRAM mapped at 0x00000000
+ */
+#define __HAL_SYSCFG_REMAPMEMORY_SRAM() do {SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_MEM_MODE); \
+ SYSCFG->CFGR1 |= (SYSCFG_CFGR1_MEM_MODE_0 | SYSCFG_CFGR1_MEM_MODE_1); \
+ }while(0)
+#endif /* SYSCFG_CFGR1_MEM_MODE_0 && SYSCFG_CFGR1_MEM_MODE_1 */
+/**
+ * @}
+ */
+
+
+#if defined(SYSCFG_CFGR1_PA11_PA12_RMP)
+/** @defgroup HAL_Pin_remap HAL Pin remap
+ * @brief Pin remapping enable/disable macros
+ * @param __PIN_REMAP__ This parameter can be a value of @ref HAL_Pin_remapping
+ * @{
+ */
+#define __HAL_REMAP_PIN_ENABLE(__PIN_REMAP__) do {assert_param(IS_HAL_REMAP_PIN((__PIN_REMAP__))); \
+ SYSCFG->CFGR1 |= (__PIN_REMAP__); \
+ }while(0)
+#define __HAL_REMAP_PIN_DISABLE(__PIN_REMAP__) do {assert_param(IS_HAL_REMAP_PIN((__PIN_REMAP__))); \
+ SYSCFG->CFGR1 &= ~(__PIN_REMAP__); \
+ }while(0)
+/**
+ * @}
+ */
+#endif /* SYSCFG_CFGR1_PA11_PA12_RMP */
+
+/** @brief Fast-mode Plus driving capability enable/disable macros
+ * @param __FASTMODEPLUS__ This parameter can be a value of @ref SYSCFG_FastModePlus_GPIO values.
+ * That you can find above these macros.
+ */
+#define __HAL_SYSCFG_FASTMODEPLUS_ENABLE(__FASTMODEPLUS__) do {assert_param(IS_SYSCFG_FASTMODEPLUS((__FASTMODEPLUS__)));\
+ SET_BIT(SYSCFG->CFGR1, (__FASTMODEPLUS__));\
+ }while(0)
+
+#define __HAL_SYSCFG_FASTMODEPLUS_DISABLE(__FASTMODEPLUS__) do {assert_param(IS_SYSCFG_FASTMODEPLUS((__FASTMODEPLUS__)));\
+ CLEAR_BIT(SYSCFG->CFGR1, (__FASTMODEPLUS__));\
+ }while(0)
+#if defined(SYSCFG_CFGR2_LOCKUP_LOCK)
+/** @defgroup Cortex_Lockup_Enable Cortex Lockup Enable
+ * @{
+ */
+/** @brief SYSCFG Break Lockup lock
+ * Enables and locks the connection of Cortex-M0 LOCKUP (Hardfault) output to TIM1/15/16/17 Break input
+ * @note The selected configuration is locked and can be unlocked by system reset
+ */
+#define __HAL_SYSCFG_BREAK_LOCKUP_LOCK() do {SYSCFG->CFGR2 &= ~(SYSCFG_CFGR2_LOCKUP_LOCK); \
+ SYSCFG->CFGR2 |= SYSCFG_CFGR2_LOCKUP_LOCK; \
+ }while(0)
+/**
+ * @}
+ */
+#endif /* SYSCFG_CFGR2_LOCKUP_LOCK */
+
+#if defined(SYSCFG_CFGR2_PVD_LOCK)
+/** @defgroup PVD_Lock_Enable PVD Lock
+ * @{
+ */
+/** @brief SYSCFG Break PVD lock
+ * Enables and locks the PVD connection with Timer1/8/15/16/17 Break Input, , as well as the PVDE and PLS[2:0] in the PWR_CR register
+ * @note The selected configuration is locked and can be unlocked by system reset
+ */
+#define __HAL_SYSCFG_BREAK_PVD_LOCK() do {SYSCFG->CFGR2 &= ~(SYSCFG_CFGR2_PVD_LOCK); \
+ SYSCFG->CFGR2 |= SYSCFG_CFGR2_PVD_LOCK; \
+ }while(0)
+/**
+ * @}
+ */
+#endif /* SYSCFG_CFGR2_PVD_LOCK */
+
+#if defined(SYSCFG_CFGR2_SRAM_PARITY_LOCK)
+/** @defgroup SRAM_Parity_Lock SRAM Parity Lock
+ * @{
+ */
+/** @brief SYSCFG Break SRAM PARITY lock
+ * Enables and locks the SRAM_PARITY error signal with Break Input of TIMER1/8/15/16/17
+ * @note The selected configuration is locked and can be unlocked by system reset
+ */
+#define __HAL_SYSCFG_BREAK_SRAMPARITY_LOCK() do {SYSCFG->CFGR2 &= ~(SYSCFG_CFGR2_SRAM_PARITY_LOCK); \
+ SYSCFG->CFGR2 |= SYSCFG_CFGR2_SRAM_PARITY_LOCK; \
+ }while(0)
+/**
+ * @}
+ */
+#endif /* SYSCFG_CFGR2_SRAM_PARITY_LOCK */
+
+#if defined(SYSCFG_CFGR2_SRAM_PEF)
+/** @defgroup HAL_SYSCFG_Parity_check_on_RAM HAL SYSCFG Parity check on RAM
+ * @brief Parity check on RAM disable macro
+ * @note Disabling the parity check on RAM locks the configuration bit.
+ * To re-enable the parity check on RAM perform a system reset.
+ * @{
+ */
+#define __HAL_SYSCFG_RAM_PARITYCHECK_DISABLE() (SYSCFG->CFGR2 |= SYSCFG_CFGR2_SRAM_PEF)
+/**
+ * @}
+ */
+#endif /* SYSCFG_CFGR2_SRAM_PEF */
+
+
+#if defined(STM32F091xC) || defined (STM32F098xx)
+/** @defgroup HAL_ISR_wrapper_check HAL ISR wrapper check
+ * @brief ISR wrapper check
+ * @note This feature is applicable on STM32F09x
+ * @note Allow to determine interrupt source per line.
+ * @{
+ */
+#define __HAL_GET_PENDING_IT(__SOURCE__) (SYSCFG->IT_LINE_SR[((__SOURCE__) >> 0x18U)] & ((__SOURCE__) & 0x00FFFFFF))
+/**
+ * @}
+ */
+#endif /* (STM32F091xC) || defined (STM32F098xx)*/
+
+#if defined(STM32F091xC) || defined (STM32F098xx)
+/** @defgroup HAL_SYSCFG_IRDA_modulation_envelope_selection HAL SYSCFG IRDA modulation envelope selection
+ * @brief selection of the modulation envelope signal macro, using bits [7:6] of SYS_CTRL(CFGR1) register
+ * @note This feature is applicable on STM32F09x
+ * @param __SOURCE__ This parameter can be a value of @ref HAL_IRDA_ENV_SEL
+ * @{
+ */
+#define __HAL_SYSCFG_IRDA_ENV_SELECTION(__SOURCE__) do {assert_param(IS_HAL_SYSCFG_IRDA_ENV_SEL((__SOURCE__))); \
+ SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_IRDA_ENV_SEL); \
+ SYSCFG->CFGR1 |= (__SOURCE__); \
+ }while(0)
+
+#define __HAL_SYSCFG_GET_IRDA_ENV_SELECTION() ((SYSCFG->CFGR1) & 0x000000C0)
+/**
+ * @}
+ */
+#endif /* (STM32F091xC) || defined (STM32F098xx)*/
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_Private_Macros HAL Private Macros
+ * @{
+ */
+#define IS_TICKFREQ(FREQ) (((FREQ) == HAL_TICK_FREQ_10HZ) || \
+ ((FREQ) == HAL_TICK_FREQ_100HZ) || \
+ ((FREQ) == HAL_TICK_FREQ_1KHZ))
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup HAL_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup HAL_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization and de-initialization functions ******************************/
+HAL_StatusTypeDef HAL_Init(void);
+HAL_StatusTypeDef HAL_DeInit(void);
+void HAL_MspInit(void);
+void HAL_MspDeInit(void);
+HAL_StatusTypeDef HAL_InitTick (uint32_t TickPriority);
+/**
+ * @}
+ */
+
+/* Exported variables ---------------------------------------------------------*/
+/** @addtogroup HAL_Exported_Variables
+ * @{
+ */
+extern __IO uint32_t uwTick;
+extern uint32_t uwTickPrio;
+extern HAL_TickFreqTypeDef uwTickFreq;
+/**
+ * @}
+ */
+
+/** @addtogroup HAL_Exported_Functions_Group2
+ * @{
+ */
+
+/* Peripheral Control functions ************************************************/
+void HAL_IncTick(void);
+void HAL_Delay(uint32_t Delay);
+uint32_t HAL_GetTick(void);
+uint32_t HAL_GetTickPrio(void);
+HAL_StatusTypeDef HAL_SetTickFreq(HAL_TickFreqTypeDef Freq);
+HAL_TickFreqTypeDef HAL_GetTickFreq(void);
+void HAL_SuspendTick(void);
+void HAL_ResumeTick(void);
+uint32_t HAL_GetHalVersion(void);
+uint32_t HAL_GetREVID(void);
+uint32_t HAL_GetDEVID(void);
+uint32_t HAL_GetUIDw0(void);
+uint32_t HAL_GetUIDw1(void);
+uint32_t HAL_GetUIDw2(void);
+void HAL_DBGMCU_EnableDBGStopMode(void);
+void HAL_DBGMCU_DisableDBGStopMode(void);
+void HAL_DBGMCU_EnableDBGStandbyMode(void);
+void HAL_DBGMCU_DisableDBGStandbyMode(void);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_adc.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_adc.h
new file mode 100644
index 0000000..31771b1
--- /dev/null
+++ b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_adc.h
@@ -0,0 +1,1019 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_adc.h
+ * @author MCD Application Team
+ * @brief Header file containing functions prototypes of ADC HAL library.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32F0xx_HAL_ADC_H
+#define STM32F0xx_HAL_ADC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup ADC
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup ADC_Exported_Types ADC Exported Types
+ * @{
+ */
+
+/**
+ * @brief Structure definition of ADC initialization and regular group
+ * @note The setting of these parameters with function HAL_ADC_Init() is conditioned to ADC state.
+ * ADC state can be either:
+ * - For all parameters: ADC disabled (this is the only possible ADC state to modify parameter 'ClockPrescaler')
+ * - For all parameters except 'ClockPrescaler' and 'resolution': ADC enabled without conversion on going on regular group.
+ * If ADC is not in the appropriate state to modify some parameters, these parameters setting is bypassed
+ * without error reporting (as it can be the expected behaviour in case of intended action to update another parameter (which fulfills the ADC state condition) on the fly).
+ */
+typedef struct
+{
+ uint32_t ClockPrescaler; /*!< Select ADC clock source (synchronous clock derived from APB clock or asynchronous clock derived from ADC dedicated HSI RC oscillator 14MHz) and clock prescaler.
+ This parameter can be a value of @ref ADC_ClockPrescaler
+ Note: In case of usage of the ADC dedicated HSI RC oscillator, it must be preliminarily enabled at RCC top level.
+ Note: This parameter can be modified only if the ADC is disabled */
+ uint32_t Resolution; /*!< Configures the ADC resolution.
+ This parameter can be a value of @ref ADC_Resolution */
+ uint32_t DataAlign; /*!< Specifies whether the ADC data alignment is left or right.
+ This parameter can be a value of @ref ADC_Data_align */
+ uint32_t ScanConvMode; /*!< Configures the sequencer of regular group.
+ This parameter can be associated to parameter 'DiscontinuousConvMode' to have main sequence subdivided in successive parts.
+ Sequencer is automatically enabled if several channels are set (sequencer cannot be disabled, as it can be the case on other STM32 devices):
+ If only 1 channel is set: Conversion is performed in single mode.
+ If several channels are set: Conversions are performed in sequence mode (ranks defined by each channel number: channel 0 fixed on rank 0, channel 1 fixed on rank1, ...).
+ Scan direction can be set to forward (from channel 0 to channel 18) or backward (from channel 18 to channel 0).
+ This parameter can be a value of @ref ADC_Scan_mode */
+ uint32_t EOCSelection; /*!< Specifies what EOC (End Of Conversion) flag is used for conversion by polling and interruption: end of conversion of each rank or complete sequence.
+ This parameter can be a value of @ref ADC_EOCSelection. */
+ FunctionalState LowPowerAutoWait; /*!< Selects the dynamic low power Auto Delay: new conversion start only when the previous
+ conversion (for regular group) has been treated by user software, using function HAL_ADC_GetValue().
+ This feature automatically adapts the ADC conversions trigs to the speed of the system that reads the data. Moreover, this avoids risk of overrun for low frequency applications.
+ This parameter can be set to ENABLE or DISABLE.
+ Note: Do not use with interruption or DMA (HAL_ADC_Start_IT(), HAL_ADC_Start_DMA()) since they have to clear immediately the EOC flag to free the IRQ vector sequencer.
+ Do use with polling: 1. Start conversion with HAL_ADC_Start(), 2. Later on, when conversion data is needed: use HAL_ADC_PollForConversion() to ensure that conversion is completed
+ and use HAL_ADC_GetValue() to retrieve conversion result and trig another conversion. */
+ FunctionalState LowPowerAutoPowerOff; /*!< Selects the auto-off mode: the ADC automatically powers-off after a conversion and automatically wakes-up when a new conversion is triggered (with startup time between trigger and start of sampling).
+ This feature can be combined with automatic wait mode (parameter 'LowPowerAutoWait').
+ This parameter can be set to ENABLE or DISABLE.
+ Note: If enabled, this feature also turns off the ADC dedicated 14 MHz RC oscillator (HSI14) */
+ FunctionalState ContinuousConvMode; /*!< Specifies whether the conversion is performed in single mode (one conversion) or continuous mode for regular group,
+ after the selected trigger occurred (software start or external trigger).
+ This parameter can be set to ENABLE or DISABLE. */
+ FunctionalState DiscontinuousConvMode; /*!< Specifies whether the conversions sequence of regular group is performed in Complete-sequence/Discontinuous-sequence (main sequence subdivided in successive parts).
+ Discontinuous mode is used only if sequencer is enabled (parameter 'ScanConvMode'). If sequencer is disabled, this parameter is discarded.
+ Discontinuous mode can be enabled only if continuous mode is disabled. If continuous mode is enabled, this parameter setting is discarded.
+ This parameter can be set to ENABLE or DISABLE
+ Note: Number of discontinuous ranks increment is fixed to one-by-one. */
+ uint32_t ExternalTrigConv; /*!< Selects the external event used to trigger the conversion start of regular group.
+ If set to ADC_SOFTWARE_START, external triggers are disabled.
+ This parameter can be a value of @ref ADC_External_trigger_source_Regular */
+ uint32_t ExternalTrigConvEdge; /*!< Selects the external trigger edge of regular group.
+ If trigger is set to ADC_SOFTWARE_START, this parameter is discarded.
+ This parameter can be a value of @ref ADC_External_trigger_edge_Regular */
+ FunctionalState DMAContinuousRequests; /*!< Specifies whether the DMA requests are performed in one shot mode (DMA transfer stop when number of conversions is reached)
+ or in Continuous mode (DMA transfer unlimited, whatever number of conversions).
+ Note: In continuous mode, DMA must be configured in circular mode. Otherwise an overrun will be triggered when DMA buffer maximum pointer is reached.
+ This parameter can be set to ENABLE or DISABLE. */
+ uint32_t Overrun; /*!< Select the behaviour in case of overrun: data preserved or overwritten
+ This parameter has an effect on regular group only, including in DMA mode.
+ This parameter can be a value of @ref ADC_Overrun */
+ uint32_t SamplingTimeCommon; /*!< Sampling time value to be set for the selected channel.
+ Unit: ADC clock cycles
+ Conversion time is the addition of sampling time and processing time (12.5 ADC clock cycles at ADC resolution 12 bits, 10.5 cycles at 10 bits, 8.5 cycles at 8 bits, 6.5 cycles at 6 bits).
+ Note: On STM32F0 devices, the sampling time setting is common to all channels. On some other STM32 devices, this parameter in channel wise and is located into ADC channel initialization structure.
+ This parameter can be a value of @ref ADC_sampling_times
+ Note: In case of usage of internal measurement channels (VrefInt/Vbat/TempSensor),
+ sampling time constraints must be respected (sampling time can be adjusted in function of ADC clock frequency and sampling time setting)
+ Refer to device datasheet for timings values, parameters TS_vrefint, TS_vbat, TS_temp (values rough order: 5us to 17us). */
+}ADC_InitTypeDef;
+
+/**
+ * @brief Structure definition of ADC channel for regular group
+ * @note The setting of these parameters with function HAL_ADC_ConfigChannel() is conditioned to ADC state.
+ * ADC state can be either:
+ * - For all parameters: ADC disabled or enabled without conversion on going on regular group.
+ * If ADC is not in the appropriate state to modify some parameters, these parameters setting is bypassed
+ * without error reporting (as it can be the expected behaviour in case of intended action to update another parameter (which fulfills the ADC state condition) on the fly).
+ */
+typedef struct
+{
+ uint32_t Channel; /*!< Specifies the channel to configure into ADC regular group.
+ This parameter can be a value of @ref ADC_channels
+ Note: Depending on devices, some channels may not be available on package pins. Refer to device datasheet for channels availability. */
+ uint32_t Rank; /*!< Add or remove the channel from ADC regular group sequencer.
+ On STM32F0 devices, number of ranks in the sequence is defined by number of channels enabled, rank of each channel is defined by channel number (channel 0 fixed on rank 0, channel 1 fixed on rank1, ...)..
+ Despite the channel rank is fixed, this parameter allow an additional possibility: to remove the selected rank (selected channel) from sequencer.
+ This parameter can be a value of @ref ADC_rank */
+ uint32_t SamplingTime; /*!< Sampling time value to be set for the selected channel.
+ Unit: ADC clock cycles
+ Conversion time is the addition of sampling time and processing time (12.5 ADC clock cycles at ADC resolution 12 bits, 10.5 cycles at 10 bits, 8.5 cycles at 8 bits, 6.5 cycles at 6 bits).
+ This parameter can be a value of @ref ADC_sampling_times
+ Caution: this setting impacts the entire regular group. Therefore, call of HAL_ADC_ConfigChannel() to configure a channel can impact the configuration of other channels previously set.
+ Caution: Obsolete parameter. Use parameter "SamplingTimeCommon" in ADC initialization structure.
+ If parameter "SamplingTimeCommon" is set to a valid sampling time, parameter "SamplingTime" is discarded.
+ Note: In case of usage of internal measurement channels (VrefInt/Vbat/TempSensor),
+ sampling time constraints must be respected (sampling time can be adjusted in function of ADC clock frequency and sampling time setting)
+ Refer to device datasheet for timings values, parameters TS_vrefint, TS_vbat, TS_temp (values rough order: 5us to 17us). */
+}ADC_ChannelConfTypeDef;
+
+/**
+ * @brief Structure definition of ADC analog watchdog
+ * @note The setting of these parameters with function HAL_ADC_AnalogWDGConfig() is conditioned to ADC state.
+ * ADC state can be either: ADC disabled or ADC enabled without conversion on going on regular group.
+ */
+typedef struct
+{
+ uint32_t WatchdogMode; /*!< Configures the ADC analog watchdog mode: single/all/none channels.
+ This parameter can be a value of @ref ADC_analog_watchdog_mode. */
+ uint32_t Channel; /*!< Selects which ADC channel to monitor by analog watchdog.
+ This parameter has an effect only if parameter 'WatchdogMode' is configured on single channel. Only 1 channel can be monitored.
+ This parameter can be a value of @ref ADC_channels. */
+ FunctionalState ITMode; /*!< Specifies whether the analog watchdog is configured in interrupt or polling mode.
+ This parameter can be set to ENABLE or DISABLE */
+ uint32_t HighThreshold; /*!< Configures the ADC analog watchdog High threshold value.
+ Depending of ADC resolution selected (12, 10, 8 or 6 bits), this parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF, 0x3FF, 0xFF or 0x3F respectively. */
+ uint32_t LowThreshold; /*!< Configures the ADC analog watchdog High threshold value.
+ Depending of ADC resolution selected (12, 10, 8 or 6 bits), this parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF, 0x3FF, 0xFF or 0x3F respectively. */
+}ADC_AnalogWDGConfTypeDef;
+
+/**
+ * @brief HAL ADC state machine: ADC states definition (bitfields)
+ * @note ADC state machine is managed by bitfields, state must be compared
+ * with bit by bit.
+ * For example:
+ * " if (HAL_IS_BIT_SET(HAL_ADC_GetState(hadc1), HAL_ADC_STATE_REG_BUSY)) "
+ * " if (HAL_IS_BIT_SET(HAL_ADC_GetState(hadc1), HAL_ADC_STATE_AWD1) ) "
+ */
+/* States of ADC global scope */
+#define HAL_ADC_STATE_RESET (0x00000000U) /*!< ADC not yet initialized or disabled */
+#define HAL_ADC_STATE_READY (0x00000001U) /*!< ADC peripheral ready for use */
+#define HAL_ADC_STATE_BUSY_INTERNAL (0x00000002U) /*!< ADC is busy to internal process (initialization, calibration) */
+#define HAL_ADC_STATE_TIMEOUT (0x00000004U) /*!< TimeOut occurrence */
+
+/* States of ADC errors */
+#define HAL_ADC_STATE_ERROR_INTERNAL (0x00000010U) /*!< Internal error occurrence */
+#define HAL_ADC_STATE_ERROR_CONFIG (0x00000020U) /*!< Configuration error occurrence */
+#define HAL_ADC_STATE_ERROR_DMA (0x00000040U) /*!< DMA error occurrence */
+
+/* States of ADC group regular */
+#define HAL_ADC_STATE_REG_BUSY (0x00000100U) /*!< A conversion on group regular is ongoing or can occur (either by continuous mode,
+ external trigger, low power auto power-on, multimode ADC master control) */
+#define HAL_ADC_STATE_REG_EOC (0x00000200U) /*!< Conversion data available on group regular */
+#define HAL_ADC_STATE_REG_OVR (0x00000400U) /*!< Overrun occurrence */
+#define HAL_ADC_STATE_REG_EOSMP (0x00000800U) /*!< Not available on STM32F0 device: End Of Sampling flag raised */
+
+/* States of ADC group injected */
+#define HAL_ADC_STATE_INJ_BUSY (0x00001000U) /*!< Not available on STM32F0 device: A conversion on group injected is ongoing or can occur (either by auto-injection mode,
+ external trigger, low power auto power-on, multimode ADC master control) */
+#define HAL_ADC_STATE_INJ_EOC (0x00002000U) /*!< Not available on STM32F0 device: Conversion data available on group injected */
+#define HAL_ADC_STATE_INJ_JQOVF (0x00004000U) /*!< Not available on STM32F0 device: Not available on STM32F0 device: Injected queue overflow occurrence */
+
+/* States of ADC analog watchdogs */
+#define HAL_ADC_STATE_AWD1 (0x00010000U) /*!< Out-of-window occurrence of analog watchdog 1 */
+#define HAL_ADC_STATE_AWD2 (0x00020000U) /*!< Not available on STM32F0 device: Out-of-window occurrence of analog watchdog 2 */
+#define HAL_ADC_STATE_AWD3 (0x00040000U) /*!< Not available on STM32F0 device: Out-of-window occurrence of analog watchdog 3 */
+
+/* States of ADC multi-mode */
+#define HAL_ADC_STATE_MULTIMODE_SLAVE (0x00100000U) /*!< Not available on STM32F0 device: ADC in multimode slave state, controlled by another ADC master ( */
+
+
+/**
+ * @brief ADC handle Structure definition
+ */
+typedef struct __ADC_HandleTypeDef
+{
+ ADC_TypeDef *Instance; /*!< Register base address */
+
+ ADC_InitTypeDef Init; /*!< ADC required parameters */
+
+ DMA_HandleTypeDef *DMA_Handle; /*!< Pointer DMA Handler */
+
+ HAL_LockTypeDef Lock; /*!< ADC locking object */
+
+ __IO uint32_t State; /*!< ADC communication state (bitmap of ADC states) */
+
+ __IO uint32_t ErrorCode; /*!< ADC Error code */
+
+
+#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1)
+ void (* ConvCpltCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC conversion complete callback */
+ void (* ConvHalfCpltCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC conversion DMA half-transfer callback */
+ void (* LevelOutOfWindowCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC analog watchdog 1 callback */
+ void (* ErrorCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC error callback */
+ void (* MspInitCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC Msp Init callback */
+ void (* MspDeInitCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC Msp DeInit callback */
+#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */
+}ADC_HandleTypeDef;
+
+#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1)
+/**
+ * @brief HAL ADC Callback ID enumeration definition
+ */
+typedef enum
+{
+ HAL_ADC_CONVERSION_COMPLETE_CB_ID = 0x00U, /*!< ADC conversion complete callback ID */
+ HAL_ADC_CONVERSION_HALF_CB_ID = 0x01U, /*!< ADC conversion DMA half-transfer callback ID */
+ HAL_ADC_LEVEL_OUT_OF_WINDOW_1_CB_ID = 0x02U, /*!< ADC analog watchdog 1 callback ID */
+ HAL_ADC_ERROR_CB_ID = 0x03U, /*!< ADC error callback ID */
+ HAL_ADC_INJ_CONVERSION_COMPLETE_CB_ID = 0x04U, /*!< ADC group injected conversion complete callback ID */
+ HAL_ADC_MSPINIT_CB_ID = 0x09U, /*!< ADC Msp Init callback ID */
+ HAL_ADC_MSPDEINIT_CB_ID = 0x0AU /*!< ADC Msp DeInit callback ID */
+} HAL_ADC_CallbackIDTypeDef;
+
+/**
+ * @brief HAL ADC Callback pointer definition
+ */
+typedef void (*pADC_CallbackTypeDef)(ADC_HandleTypeDef *hadc); /*!< pointer to a ADC callback function */
+
+#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */
+
+/**
+ * @}
+ */
+
+
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup ADC_Exported_Constants ADC Exported Constants
+ * @{
+ */
+
+/** @defgroup ADC_Error_Code ADC Error Code
+ * @{
+ */
+#define HAL_ADC_ERROR_NONE (0x00U) /*!< No error */
+#define HAL_ADC_ERROR_INTERNAL (0x01U) /*!< ADC IP internal error: if problem of clocking,
+ enable/disable, erroneous state */
+#define HAL_ADC_ERROR_OVR (0x02U) /*!< Overrun error */
+#define HAL_ADC_ERROR_DMA (0x04U) /*!< DMA transfer error */
+
+#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1)
+#define HAL_ADC_ERROR_INVALID_CALLBACK (0x10U) /*!< Invalid Callback error */
+#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */
+
+/**
+ * @}
+ */
+
+/** @defgroup ADC_ClockPrescaler ADC ClockPrescaler
+ * @{
+ */
+#define ADC_CLOCK_ASYNC_DIV1 (0x00000000U) /*!< ADC asynchronous clock derived from ADC dedicated HSI */
+
+#define ADC_CLOCK_SYNC_PCLK_DIV2 ((uint32_t)ADC_CFGR2_CKMODE_0) /*!< ADC synchronous clock derived from AHB clock divided by a prescaler of 2 */
+#define ADC_CLOCK_SYNC_PCLK_DIV4 ((uint32_t)ADC_CFGR2_CKMODE_1) /*!< ADC synchronous clock derived from AHB clock divided by a prescaler of 4 */
+
+/**
+ * @}
+ */
+
+/** @defgroup ADC_Resolution ADC Resolution
+ * @{
+ */
+#define ADC_RESOLUTION_12B (0x00000000U) /*!< ADC 12-bit resolution */
+#define ADC_RESOLUTION_10B ((uint32_t)ADC_CFGR1_RES_0) /*!< ADC 10-bit resolution */
+#define ADC_RESOLUTION_8B ((uint32_t)ADC_CFGR1_RES_1) /*!< ADC 8-bit resolution */
+#define ADC_RESOLUTION_6B ((uint32_t)ADC_CFGR1_RES) /*!< ADC 6-bit resolution */
+/**
+ * @}
+ */
+
+/** @defgroup ADC_Data_align ADC Data_align
+ * @{
+ */
+#define ADC_DATAALIGN_RIGHT (0x00000000U)
+#define ADC_DATAALIGN_LEFT ((uint32_t)ADC_CFGR1_ALIGN)
+/**
+ * @}
+ */
+
+/** @defgroup ADC_Scan_mode ADC Scan mode
+ * @{
+ */
+/* Note: Scan mode values must be compatible with other STM32 devices having */
+/* a configurable sequencer. */
+/* Scan direction setting values are defined by taking in account */
+/* already defined values for other STM32 devices: */
+/* ADC_SCAN_DISABLE (0x00000000U) */
+/* ADC_SCAN_ENABLE (0x00000001U) */
+/* Scan direction forward is considered as default setting equivalent */
+/* to scan enable. */
+/* Scan direction backward is considered as additional setting. */
+/* In case of migration from another STM32 device, the user will be */
+/* warned of change of setting choices with assert check. */
+#define ADC_SCAN_DIRECTION_FORWARD (0x00000001U) /*!< Scan direction forward: from channel 0 to channel 18 */
+#define ADC_SCAN_DIRECTION_BACKWARD (0x00000002U) /*!< Scan direction backward: from channel 18 to channel 0 */
+
+#define ADC_SCAN_ENABLE ADC_SCAN_DIRECTION_FORWARD /* For compatibility with other STM32 devices */
+
+/**
+ * @}
+ */
+
+/** @defgroup ADC_External_trigger_edge_Regular ADC External trigger edge Regular
+ * @{
+ */
+#define ADC_EXTERNALTRIGCONVEDGE_NONE (0x00000000U)
+#define ADC_EXTERNALTRIGCONVEDGE_RISING ((uint32_t)ADC_CFGR1_EXTEN_0)
+#define ADC_EXTERNALTRIGCONVEDGE_FALLING ((uint32_t)ADC_CFGR1_EXTEN_1)
+#define ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING ((uint32_t)ADC_CFGR1_EXTEN)
+/**
+ * @}
+ */
+
+/** @defgroup ADC_EOCSelection ADC EOCSelection
+ * @{
+ */
+#define ADC_EOC_SINGLE_CONV ((uint32_t) ADC_ISR_EOC)
+#define ADC_EOC_SEQ_CONV ((uint32_t) ADC_ISR_EOS)
+/**
+ * @}
+ */
+
+/** @defgroup ADC_Overrun ADC Overrun
+ * @{
+ */
+#define ADC_OVR_DATA_OVERWRITTEN (0x00000000U)
+#define ADC_OVR_DATA_PRESERVED (0x00000001U)
+/**
+ * @}
+ */
+
+/** @defgroup ADC_rank ADC rank
+ * @{
+ */
+#define ADC_RANK_CHANNEL_NUMBER (0x00001000U) /*!< Enable the rank of the selected channels. Number of ranks in the sequence is defined by number of channels enabled, rank of each channel is defined by channel number (channel 0 fixed on rank 0, channel 1 fixed on rank1, ...) */
+#define ADC_RANK_NONE (0x00001001U) /*!< Disable the selected rank (selected channel) from sequencer */
+/**
+ * @}
+ */
+
+/** @defgroup ADC_sampling_times ADC sampling times
+ * @{
+ */
+/* Note: Parameter "ADC_SAMPLETIME_1CYCLE_5" defined with a dummy bit */
+/* to distinguish this parameter versus reset value 0x00000000, */
+/* in the context of management of parameters "SamplingTimeCommon" */
+/* and "SamplingTime" (obsolete)). */
+#define ADC_SAMPLETIME_1CYCLE_5 (0x10000000U) /*!< Sampling time 1.5 ADC clock cycle */
+#define ADC_SAMPLETIME_7CYCLES_5 ((uint32_t) ADC_SMPR_SMP_0) /*!< Sampling time 7.5 ADC clock cycles */
+#define ADC_SAMPLETIME_13CYCLES_5 ((uint32_t) ADC_SMPR_SMP_1) /*!< Sampling time 13.5 ADC clock cycles */
+#define ADC_SAMPLETIME_28CYCLES_5 ((uint32_t)(ADC_SMPR_SMP_1 | ADC_SMPR_SMP_0)) /*!< Sampling time 28.5 ADC clock cycles */
+#define ADC_SAMPLETIME_41CYCLES_5 ((uint32_t) ADC_SMPR_SMP_2) /*!< Sampling time 41.5 ADC clock cycles */
+#define ADC_SAMPLETIME_55CYCLES_5 ((uint32_t)(ADC_SMPR_SMP_2 | ADC_SMPR_SMP_0)) /*!< Sampling time 55.5 ADC clock cycles */
+#define ADC_SAMPLETIME_71CYCLES_5 ((uint32_t)(ADC_SMPR_SMP_2 | ADC_SMPR_SMP_1)) /*!< Sampling time 71.5 ADC clock cycles */
+#define ADC_SAMPLETIME_239CYCLES_5 ((uint32_t) ADC_SMPR_SMP) /*!< Sampling time 239.5 ADC clock cycles */
+/**
+ * @}
+ */
+
+/** @defgroup ADC_analog_watchdog_mode ADC analog watchdog mode
+ * @{
+ */
+#define ADC_ANALOGWATCHDOG_NONE ( 0x00000000U)
+#define ADC_ANALOGWATCHDOG_SINGLE_REG ((uint32_t)(ADC_CFGR1_AWDSGL | ADC_CFGR1_AWDEN))
+#define ADC_ANALOGWATCHDOG_ALL_REG ((uint32_t) ADC_CFGR1_AWDEN)
+/**
+ * @}
+ */
+
+/** @defgroup ADC_Event_type ADC Event type
+ * @{
+ */
+#define ADC_AWD_EVENT ((uint32_t)ADC_FLAG_AWD) /*!< ADC Analog watchdog 1 event */
+#define ADC_OVR_EVENT ((uint32_t)ADC_FLAG_OVR) /*!< ADC overrun event */
+/**
+ * @}
+ */
+
+/** @defgroup ADC_interrupts_definition ADC interrupts definition
+ * @{
+ */
+#define ADC_IT_AWD ADC_IER_AWDIE /*!< ADC Analog watchdog interrupt source */
+#define ADC_IT_OVR ADC_IER_OVRIE /*!< ADC overrun interrupt source */
+#define ADC_IT_EOS ADC_IER_EOSEQIE /*!< ADC End of Regular sequence of Conversions interrupt source */
+#define ADC_IT_EOC ADC_IER_EOCIE /*!< ADC End of Regular Conversion interrupt source */
+#define ADC_IT_EOSMP ADC_IER_EOSMPIE /*!< ADC End of Sampling interrupt source */
+#define ADC_IT_RDY ADC_IER_ADRDYIE /*!< ADC Ready interrupt source */
+/**
+ * @}
+ */
+
+/** @defgroup ADC_flags_definition ADC flags definition
+ * @{
+ */
+#define ADC_FLAG_AWD ADC_ISR_AWD /*!< ADC Analog watchdog flag */
+#define ADC_FLAG_OVR ADC_ISR_OVR /*!< ADC overrun flag */
+#define ADC_FLAG_EOS ADC_ISR_EOSEQ /*!< ADC End of Regular sequence of Conversions flag */
+#define ADC_FLAG_EOC ADC_ISR_EOC /*!< ADC End of Regular Conversion flag */
+#define ADC_FLAG_EOSMP ADC_ISR_EOSMP /*!< ADC End of Sampling flag */
+#define ADC_FLAG_RDY ADC_ISR_ADRDY /*!< ADC Ready flag */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+/* Private constants ---------------------------------------------------------*/
+
+/** @addtogroup ADC_Private_Constants ADC Private Constants
+ * @{
+ */
+
+/** @defgroup ADC_Internal_HAL_driver_Ext_trig_src_Regular ADC Internal HAL driver Ext trig src Regular
+ * @{
+ */
+
+/* List of external triggers of regular group for ADC1: */
+/* (used internally by HAL driver. To not use into HAL structure parameters) */
+#define ADC1_2_EXTERNALTRIG_T1_TRGO (0x00000000U)
+#define ADC1_2_EXTERNALTRIG_T1_CC4 ((uint32_t)ADC_CFGR1_EXTSEL_0)
+#define ADC1_2_EXTERNALTRIG_T2_TRGO ((uint32_t)ADC_CFGR1_EXTSEL_1)
+#define ADC1_2_EXTERNALTRIG_T3_TRGO ((uint32_t)(ADC_CFGR1_EXTSEL_1 | ADC_CFGR1_EXTSEL_0))
+#define ADC1_2_EXTERNALTRIG_T15_TRGO ((uint32_t)ADC_CFGR1_EXTSEL_2)
+/**
+ * @}
+ */
+
+/* Combination of all post-conversion flags bits: EOC/EOS, OVR, AWD */
+#define ADC_FLAG_POSTCONV_ALL (ADC_FLAG_AWD | ADC_FLAG_OVR | ADC_FLAG_EOS | ADC_FLAG_EOC)
+
+/**
+ * @}
+ */
+
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup ADC_Exported_Macros ADC Exported Macros
+ * @{
+ */
+/* Macro for internal HAL driver usage, and possibly can be used into code of */
+/* final user. */
+
+/**
+ * @brief Enable the ADC peripheral
+ * @param __HANDLE__ ADC handle
+ * @retval None
+ */
+#define __HAL_ADC_ENABLE(__HANDLE__) \
+ ((__HANDLE__)->Instance->CR |= ADC_CR_ADEN)
+
+/**
+ * @brief Disable the ADC peripheral
+ * @param __HANDLE__ ADC handle
+ * @retval None
+ */
+#define __HAL_ADC_DISABLE(__HANDLE__) \
+ do{ \
+ (__HANDLE__)->Instance->CR |= ADC_CR_ADDIS; \
+ __HAL_ADC_CLEAR_FLAG((__HANDLE__), (ADC_FLAG_EOSMP | ADC_FLAG_RDY)); \
+ } while(0)
+
+/**
+ * @brief Enable the ADC end of conversion interrupt.
+ * @param __HANDLE__ ADC handle
+ * @param __INTERRUPT__ ADC Interrupt
+ * This parameter can be any combination of the following values:
+ * @arg ADC_IT_EOC: ADC End of Regular Conversion interrupt source
+ * @arg ADC_IT_EOS: ADC End of Regular sequence of Conversions interrupt source
+ * @arg ADC_IT_AWD: ADC Analog watchdog interrupt source
+ * @arg ADC_IT_OVR: ADC overrun interrupt source
+ * @arg ADC_IT_EOSMP: ADC End of Sampling interrupt source
+ * @arg ADC_IT_RDY: ADC Ready interrupt source
+ * @retval None
+ */
+#define __HAL_ADC_ENABLE_IT(__HANDLE__, __INTERRUPT__) \
+ (((__HANDLE__)->Instance->IER) |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the ADC end of conversion interrupt.
+ * @param __HANDLE__ ADC handle
+ * @param __INTERRUPT__ ADC Interrupt
+ * This parameter can be any combination of the following values:
+ * @arg ADC_IT_EOC: ADC End of Regular Conversion interrupt source
+ * @arg ADC_IT_EOS: ADC End of Regular sequence of Conversions interrupt source
+ * @arg ADC_IT_AWD: ADC Analog watchdog interrupt source
+ * @arg ADC_IT_OVR: ADC overrun interrupt source
+ * @arg ADC_IT_EOSMP: ADC End of Sampling interrupt source
+ * @arg ADC_IT_RDY: ADC Ready interrupt source
+ * @retval None
+ */
+#define __HAL_ADC_DISABLE_IT(__HANDLE__, __INTERRUPT__) \
+ (((__HANDLE__)->Instance->IER) &= ~(__INTERRUPT__))
+
+/** @brief Checks if the specified ADC interrupt source is enabled or disabled.
+ * @param __HANDLE__ ADC handle
+ * @param __INTERRUPT__ ADC interrupt source to check
+ * This parameter can be any combination of the following values:
+ * @arg ADC_IT_EOC: ADC End of Regular Conversion interrupt source
+ * @arg ADC_IT_EOS: ADC End of Regular sequence of Conversions interrupt source
+ * @arg ADC_IT_AWD: ADC Analog watchdog interrupt source
+ * @arg ADC_IT_OVR: ADC overrun interrupt source
+ * @arg ADC_IT_EOSMP: ADC End of Sampling interrupt source
+ * @arg ADC_IT_RDY: ADC Ready interrupt source
+ * @retval State ofinterruption (SET or RESET)
+ */
+#define __HAL_ADC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) \
+ (((__HANDLE__)->Instance->IER & (__INTERRUPT__)) == (__INTERRUPT__))
+
+/**
+ * @brief Get the selected ADC's flag status.
+ * @param __HANDLE__ ADC handle
+ * @param __FLAG__ ADC flag
+ * This parameter can be any combination of the following values:
+ * @arg ADC_FLAG_EOC: ADC End of Regular conversion flag
+ * @arg ADC_FLAG_EOS: ADC End of Regular sequence of Conversions flag
+ * @arg ADC_FLAG_AWD: ADC Analog watchdog flag
+ * @arg ADC_FLAG_OVR: ADC overrun flag
+ * @arg ADC_FLAG_EOSMP: ADC End of Sampling flag
+ * @arg ADC_FLAG_RDY: ADC Ready flag
+ * @retval None
+ */
+#define __HAL_ADC_GET_FLAG(__HANDLE__, __FLAG__) \
+ ((((__HANDLE__)->Instance->ISR) & (__FLAG__)) == (__FLAG__))
+
+/**
+ * @brief Clear the ADC's pending flags
+ * @param __HANDLE__ ADC handle
+ * @param __FLAG__ ADC flag
+ * This parameter can be any combination of the following values:
+ * @arg ADC_FLAG_EOC: ADC End of Regular conversion flag
+ * @arg ADC_FLAG_EOS: ADC End of Regular sequence of Conversions flag
+ * @arg ADC_FLAG_AWD: ADC Analog watchdog flag
+ * @arg ADC_FLAG_OVR: ADC overrun flag
+ * @arg ADC_FLAG_EOSMP: ADC End of Sampling flag
+ * @arg ADC_FLAG_RDY: ADC Ready flag
+ * @retval None
+ */
+/* Note: bit cleared bit by writing 1 (writing 0 has no effect on any bit of register ISR) */
+#define __HAL_ADC_CLEAR_FLAG(__HANDLE__, __FLAG__) \
+ (((__HANDLE__)->Instance->ISR) = (__FLAG__))
+
+/** @brief Reset ADC handle state
+ * @param __HANDLE__ ADC handle
+ * @retval None
+ */
+#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1)
+#define __HAL_ADC_RESET_HANDLE_STATE(__HANDLE__) \
+ do{ \
+ (__HANDLE__)->State = HAL_ADC_STATE_RESET; \
+ (__HANDLE__)->MspInitCallback = NULL; \
+ (__HANDLE__)->MspDeInitCallback = NULL; \
+ } while(0)
+#else
+#define __HAL_ADC_RESET_HANDLE_STATE(__HANDLE__) \
+ ((__HANDLE__)->State = HAL_ADC_STATE_RESET)
+#endif
+
+/**
+ * @}
+ */
+
+
+/* Private macro -------------------------------------------------------------*/
+
+/** @defgroup ADC_Private_Macros ADC Private Macros
+ * @{
+ */
+/* Macro reserved for internal HAL driver usage, not intended to be used in */
+/* code of final user. */
+
+
+/**
+ * @brief Verification of hardware constraints before ADC can be enabled
+ * @param __HANDLE__ ADC handle
+ * @retval SET (ADC can be enabled) or RESET (ADC cannot be enabled)
+ */
+#define ADC_ENABLING_CONDITIONS(__HANDLE__) \
+ (( ( ((__HANDLE__)->Instance->CR) & \
+ (ADC_CR_ADCAL | ADC_CR_ADSTP | ADC_CR_ADSTART | ADC_CR_ADDIS | ADC_CR_ADEN) \
+ ) == RESET \
+ ) ? SET : RESET)
+
+/**
+ * @brief Verification of hardware constraints before ADC can be disabled
+ * @param __HANDLE__ ADC handle
+ * @retval SET (ADC can be disabled) or RESET (ADC cannot be disabled)
+ */
+#define ADC_DISABLING_CONDITIONS(__HANDLE__) \
+ (( ( ((__HANDLE__)->Instance->CR) & \
+ (ADC_CR_ADSTART | ADC_CR_ADEN)) == ADC_CR_ADEN \
+ ) ? SET : RESET)
+
+/**
+ * @brief Verification of ADC state: enabled or disabled
+ * @param __HANDLE__ ADC handle
+ * @retval SET (ADC enabled) or RESET (ADC disabled)
+ */
+/* Note: If low power mode AutoPowerOff is enabled, power-on/off phases are */
+/* performed automatically by hardware and flag ADC_FLAG_RDY is not */
+/* set. */
+#define ADC_IS_ENABLE(__HANDLE__) \
+ (( ((((__HANDLE__)->Instance->CR) & (ADC_CR_ADEN | ADC_CR_ADDIS)) == ADC_CR_ADEN) && \
+ (((((__HANDLE__)->Instance->ISR) & ADC_FLAG_RDY) == ADC_FLAG_RDY) || \
+ ((((__HANDLE__)->Instance->CFGR1) & ADC_CFGR1_AUTOFF) == ADC_CFGR1_AUTOFF) ) \
+ ) ? SET : RESET)
+
+/**
+ * @brief Test if conversion trigger of regular group is software start
+ * or external trigger.
+ * @param __HANDLE__ ADC handle
+ * @retval SET (software start) or RESET (external trigger)
+ */
+#define ADC_IS_SOFTWARE_START_REGULAR(__HANDLE__) \
+ (((__HANDLE__)->Instance->CFGR1 & ADC_CFGR1_EXTEN) == RESET)
+
+/**
+ * @brief Check if no conversion on going on regular group
+ * @param __HANDLE__ ADC handle
+ * @retval SET (conversion is on going) or RESET (no conversion is on going)
+ */
+#define ADC_IS_CONVERSION_ONGOING_REGULAR(__HANDLE__) \
+ (( (((__HANDLE__)->Instance->CR) & ADC_CR_ADSTART) == RESET \
+ ) ? RESET : SET)
+
+/**
+ * @brief Returns resolution bits in CFGR1 register: RES[1:0].
+ * Returned value is among parameters to @ref ADC_Resolution.
+ * @param __HANDLE__ ADC handle
+ * @retval None
+ */
+#define ADC_GET_RESOLUTION(__HANDLE__) \
+ (((__HANDLE__)->Instance->CFGR1) & ADC_CFGR1_RES)
+
+/**
+ * @brief Returns ADC sample time bits in SMPR register: SMP[2:0].
+ * Returned value is among parameters to @ref ADC_Resolution.
+ * @param __HANDLE__ ADC handle
+ * @retval None
+ */
+#define ADC_GET_SAMPLINGTIME(__HANDLE__) \
+ (((__HANDLE__)->Instance->SMPR) & ADC_SMPR_SMP)
+
+/**
+ * @brief Simultaneously clears and sets specific bits of the handle State
+ * @note: ADC_STATE_CLR_SET() macro is merely aliased to generic macro MODIFY_REG(),
+ * the first parameter is the ADC handle State, the second parameter is the
+ * bit field to clear, the third and last parameter is the bit field to set.
+ * @retval None
+ */
+#define ADC_STATE_CLR_SET MODIFY_REG
+
+/**
+ * @brief Clear ADC error code (set it to error code: "no error")
+ * @param __HANDLE__ ADC handle
+ * @retval None
+ */
+#define ADC_CLEAR_ERRORCODE(__HANDLE__) \
+ ((__HANDLE__)->ErrorCode = HAL_ADC_ERROR_NONE)
+
+
+/**
+ * @brief Configure the channel number into channel selection register
+ * @param _CHANNEL_ ADC Channel
+ * @retval None
+ */
+/* This function converts ADC channels from numbers (see defgroup ADC_channels)
+ to bitfields, to get the equivalence of CMSIS channels:
+ ADC_CHANNEL_0 ((uint32_t) ADC_CHSELR_CHSEL0)
+ ADC_CHANNEL_1 ((uint32_t) ADC_CHSELR_CHSEL1)
+ ADC_CHANNEL_2 ((uint32_t) ADC_CHSELR_CHSEL2)
+ ADC_CHANNEL_3 ((uint32_t) ADC_CHSELR_CHSEL3)
+ ADC_CHANNEL_4 ((uint32_t) ADC_CHSELR_CHSEL4)
+ ADC_CHANNEL_5 ((uint32_t) ADC_CHSELR_CHSEL5)
+ ADC_CHANNEL_6 ((uint32_t) ADC_CHSELR_CHSEL6)
+ ADC_CHANNEL_7 ((uint32_t) ADC_CHSELR_CHSEL7)
+ ADC_CHANNEL_8 ((uint32_t) ADC_CHSELR_CHSEL8)
+ ADC_CHANNEL_9 ((uint32_t) ADC_CHSELR_CHSEL9)
+ ADC_CHANNEL_10 ((uint32_t) ADC_CHSELR_CHSEL10)
+ ADC_CHANNEL_11 ((uint32_t) ADC_CHSELR_CHSEL11)
+ ADC_CHANNEL_12 ((uint32_t) ADC_CHSELR_CHSEL12)
+ ADC_CHANNEL_13 ((uint32_t) ADC_CHSELR_CHSEL13)
+ ADC_CHANNEL_14 ((uint32_t) ADC_CHSELR_CHSEL14)
+ ADC_CHANNEL_15 ((uint32_t) ADC_CHSELR_CHSEL15)
+ ADC_CHANNEL_16 ((uint32_t) ADC_CHSELR_CHSEL16)
+ ADC_CHANNEL_17 ((uint32_t) ADC_CHSELR_CHSEL17)
+ ADC_CHANNEL_18 ((uint32_t) ADC_CHSELR_CHSEL18)
+*/
+#define ADC_CHSELR_CHANNEL(_CHANNEL_) \
+ ( 1U << (_CHANNEL_))
+
+/**
+ * @brief Set the ADC's sample time
+ * @param _SAMPLETIME_ Sample time parameter.
+ * @retval None
+ */
+/* Note: ADC sampling time set using mask ADC_SMPR_SMP due to parameter */
+/* "ADC_SAMPLETIME_1CYCLE_5" defined with a dummy bit (bit used to */
+/* distinguish this parameter versus reset value 0x00000000, */
+/* in the context of management of parameters "SamplingTimeCommon" */
+/* and "SamplingTime" (obsolete)). */
+#define ADC_SMPR_SET(_SAMPLETIME_) \
+ ((_SAMPLETIME_) & (ADC_SMPR_SMP))
+
+/**
+ * @brief Set the Analog Watchdog 1 channel.
+ * @param _CHANNEL_ channel to be monitored by Analog Watchdog 1.
+ * @retval None
+ */
+#define ADC_CFGR_AWDCH(_CHANNEL_) \
+ ((_CHANNEL_) << 26U)
+
+/**
+ * @brief Enable ADC discontinuous conversion mode for regular group
+ * @param _REG_DISCONTINUOUS_MODE_ Regular discontinuous mode.
+ * @retval None
+ */
+#define ADC_CFGR1_REG_DISCCONTINUOUS(_REG_DISCONTINUOUS_MODE_) \
+ ((_REG_DISCONTINUOUS_MODE_) << 16U)
+
+/**
+ * @brief Enable the ADC auto off mode.
+ * @param _AUTOOFF_ Auto off bit enable or disable.
+ * @retval None
+ */
+#define ADC_CFGR1_AUTOOFF(_AUTOOFF_) \
+ ((_AUTOOFF_) << 15U)
+
+/**
+ * @brief Enable the ADC auto delay mode.
+ * @param _AUTOWAIT_ Auto delay bit enable or disable.
+ * @retval None
+ */
+#define ADC_CFGR1_AUTOWAIT(_AUTOWAIT_) \
+ ((_AUTOWAIT_) << 14U)
+
+/**
+ * @brief Enable ADC continuous conversion mode.
+ * @param _CONTINUOUS_MODE_ Continuous mode.
+ * @retval None
+ */
+#define ADC_CFGR1_CONTINUOUS(_CONTINUOUS_MODE_) \
+ ((_CONTINUOUS_MODE_) << 13U)
+
+/**
+ * @brief Enable ADC overrun mode.
+ * @param _OVERRUN_MODE_ Overrun mode.
+ * @retval Overun bit setting to be programmed into CFGR register
+ */
+/* Note: Bit ADC_CFGR1_OVRMOD not used directly in constant */
+/* "ADC_OVR_DATA_OVERWRITTEN" to have this case defined to 0x00, to set it */
+/* as the default case to be compliant with other STM32 devices. */
+#define ADC_CFGR1_OVERRUN(_OVERRUN_MODE_) \
+ ( ( (_OVERRUN_MODE_) != (ADC_OVR_DATA_PRESERVED) \
+ )? (ADC_CFGR1_OVRMOD) : (0x00000000) \
+ )
+
+/**
+ * @brief Enable ADC scan mode to convert multiple ranks with sequencer.
+ * @param _SCAN_MODE_ Scan conversion mode.
+ * @retval None
+ */
+/* Note: Scan mode set using this macro (instead of parameter direct set) */
+/* due to different modes on other STM32 devices: to avoid any */
+/* unwanted setting, the exact parameter corresponding to the device */
+/* must be passed to this macro. */
+#define ADC_SCANDIR(_SCAN_MODE_) \
+ ( ( (_SCAN_MODE_) == (ADC_SCAN_DIRECTION_BACKWARD) \
+ )? (ADC_CFGR1_SCANDIR) : (0x00000000) \
+ )
+
+/**
+ * @brief Enable the ADC DMA continuous request.
+ * @param _DMACONTREQ_MODE_ DMA continuous request mode.
+ * @retval None
+ */
+#define ADC_CFGR1_DMACONTREQ(_DMACONTREQ_MODE_) \
+ ((_DMACONTREQ_MODE_) << 1U)
+
+/**
+ * @brief Configure the analog watchdog high threshold into register TR.
+ * @param _Threshold_ Threshold value
+ * @retval None
+ */
+#define ADC_TRX_HIGHTHRESHOLD(_Threshold_) \
+ ((_Threshold_) << 16U)
+
+/**
+ * @brief Shift the AWD threshold in function of the selected ADC resolution.
+ * Thresholds have to be left-aligned on bit 11, the LSB (right bits) are set to 0.
+ * If resolution 12 bits, no shift.
+ * If resolution 10 bits, shift of 2 ranks on the left.
+ * If resolution 8 bits, shift of 4 ranks on the left.
+ * If resolution 6 bits, shift of 6 ranks on the left.
+ * therefore, shift = (12 - resolution) = 12 - (12- (((RES[1:0]) >> 3)*2))
+ * @param __HANDLE__ ADC handle
+ * @param _Threshold_ Value to be shifted
+ * @retval None
+ */
+#define ADC_AWD1THRESHOLD_SHIFT_RESOLUTION(__HANDLE__, _Threshold_) \
+ ((_Threshold_) << ((((__HANDLE__)->Instance->CFGR1 & ADC_CFGR1_RES) >> 3U)*2))
+
+
+#define IS_ADC_CLOCKPRESCALER(ADC_CLOCK) (((ADC_CLOCK) == ADC_CLOCK_ASYNC_DIV1) || \
+ ((ADC_CLOCK) == ADC_CLOCK_SYNC_PCLK_DIV2) || \
+ ((ADC_CLOCK) == ADC_CLOCK_SYNC_PCLK_DIV4) )
+
+#define IS_ADC_RESOLUTION(RESOLUTION) (((RESOLUTION) == ADC_RESOLUTION_12B) || \
+ ((RESOLUTION) == ADC_RESOLUTION_10B) || \
+ ((RESOLUTION) == ADC_RESOLUTION_8B) || \
+ ((RESOLUTION) == ADC_RESOLUTION_6B) )
+
+#define IS_ADC_DATA_ALIGN(ALIGN) (((ALIGN) == ADC_DATAALIGN_RIGHT) || \
+ ((ALIGN) == ADC_DATAALIGN_LEFT) )
+
+#define IS_ADC_SCAN_MODE(SCAN_MODE) (((SCAN_MODE) == ADC_SCAN_DIRECTION_FORWARD) || \
+ ((SCAN_MODE) == ADC_SCAN_DIRECTION_BACKWARD) )
+
+#define IS_ADC_EXTTRIG_EDGE(EDGE) (((EDGE) == ADC_EXTERNALTRIGCONVEDGE_NONE) || \
+ ((EDGE) == ADC_EXTERNALTRIGCONVEDGE_RISING) || \
+ ((EDGE) == ADC_EXTERNALTRIGCONVEDGE_FALLING) || \
+ ((EDGE) == ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING) )
+
+#define IS_ADC_EOC_SELECTION(EOC_SELECTION) (((EOC_SELECTION) == ADC_EOC_SINGLE_CONV) || \
+ ((EOC_SELECTION) == ADC_EOC_SEQ_CONV) )
+
+#define IS_ADC_OVERRUN(OVR) (((OVR) == ADC_OVR_DATA_PRESERVED) || \
+ ((OVR) == ADC_OVR_DATA_OVERWRITTEN) )
+
+#define IS_ADC_RANK(WATCHDOG) (((WATCHDOG) == ADC_RANK_CHANNEL_NUMBER) || \
+ ((WATCHDOG) == ADC_RANK_NONE) )
+
+#define IS_ADC_SAMPLE_TIME(TIME) (((TIME) == ADC_SAMPLETIME_1CYCLE_5) || \
+ ((TIME) == ADC_SAMPLETIME_7CYCLES_5) || \
+ ((TIME) == ADC_SAMPLETIME_13CYCLES_5) || \
+ ((TIME) == ADC_SAMPLETIME_28CYCLES_5) || \
+ ((TIME) == ADC_SAMPLETIME_41CYCLES_5) || \
+ ((TIME) == ADC_SAMPLETIME_55CYCLES_5) || \
+ ((TIME) == ADC_SAMPLETIME_71CYCLES_5) || \
+ ((TIME) == ADC_SAMPLETIME_239CYCLES_5) )
+
+#define IS_ADC_ANALOG_WATCHDOG_MODE(WATCHDOG) (((WATCHDOG) == ADC_ANALOGWATCHDOG_NONE) || \
+ ((WATCHDOG) == ADC_ANALOGWATCHDOG_SINGLE_REG) || \
+ ((WATCHDOG) == ADC_ANALOGWATCHDOG_ALL_REG) )
+
+#define IS_ADC_EVENT_TYPE(EVENT) (((EVENT) == ADC_AWD_EVENT) || \
+ ((EVENT) == ADC_OVR_EVENT) )
+
+/** @defgroup ADC_range_verification ADC range verification
+ * in function of ADC resolution selected (12, 10, 8 or 6 bits)
+ * @{
+ */
+#define IS_ADC_RANGE(RESOLUTION, ADC_VALUE) \
+ ((((RESOLUTION) == ADC_RESOLUTION_12B) && ((ADC_VALUE) <= (0x0FFFU))) || \
+ (((RESOLUTION) == ADC_RESOLUTION_10B) && ((ADC_VALUE) <= (0x03FFU))) || \
+ (((RESOLUTION) == ADC_RESOLUTION_8B) && ((ADC_VALUE) <= (0x00FFU))) || \
+ (((RESOLUTION) == ADC_RESOLUTION_6B) && ((ADC_VALUE) <= (0x003FU))) )
+/**
+ * @}
+ */
+
+/** @defgroup ADC_regular_rank_verification ADC regular rank verification
+ * @{
+ */
+#define IS_ADC_REGULAR_RANK(RANK) (((RANK) >= (1U)) && ((RANK) <= (16U)))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Include ADC HAL Extension module */
+#include "stm32f0xx_hal_adc_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup ADC_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup ADC_Exported_Functions_Group1
+ * @{
+ */
+
+
+/* Initialization and de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_ADC_Init(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADC_DeInit(ADC_HandleTypeDef *hadc);
+void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc);
+void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc);
+
+#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1)
+/* Callbacks Register/UnRegister functions ***********************************/
+HAL_StatusTypeDef HAL_ADC_RegisterCallback(ADC_HandleTypeDef *hadc, HAL_ADC_CallbackIDTypeDef CallbackID, pADC_CallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_ADC_UnRegisterCallback(ADC_HandleTypeDef *hadc, HAL_ADC_CallbackIDTypeDef CallbackID);
+#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */
+
+/**
+ * @}
+ */
+
+/* IO operation functions *****************************************************/
+
+/** @addtogroup ADC_Exported_Functions_Group2
+ * @{
+ */
+
+
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_ADC_Start(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADC_Stop(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADC_PollForConversion(ADC_HandleTypeDef* hadc, uint32_t Timeout);
+HAL_StatusTypeDef HAL_ADC_PollForEvent(ADC_HandleTypeDef* hadc, uint32_t EventType, uint32_t Timeout);
+
+/* Non-blocking mode: Interruption */
+HAL_StatusTypeDef HAL_ADC_Start_IT(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADC_Stop_IT(ADC_HandleTypeDef* hadc);
+
+/* Non-blocking mode: DMA */
+HAL_StatusTypeDef HAL_ADC_Start_DMA(ADC_HandleTypeDef* hadc, uint32_t* pData, uint32_t Length);
+HAL_StatusTypeDef HAL_ADC_Stop_DMA(ADC_HandleTypeDef* hadc);
+
+/* ADC retrieve conversion value intended to be used with polling or interruption */
+uint32_t HAL_ADC_GetValue(ADC_HandleTypeDef* hadc);
+
+/* ADC IRQHandler and Callbacks used in non-blocking modes (Interruption and DMA) */
+void HAL_ADC_IRQHandler(ADC_HandleTypeDef* hadc);
+void HAL_ADC_ConvCpltCallback(ADC_HandleTypeDef* hadc);
+void HAL_ADC_ConvHalfCpltCallback(ADC_HandleTypeDef* hadc);
+void HAL_ADC_LevelOutOfWindowCallback(ADC_HandleTypeDef* hadc);
+void HAL_ADC_ErrorCallback(ADC_HandleTypeDef *hadc);
+/**
+ * @}
+ */
+
+
+/* Peripheral Control functions ***********************************************/
+/** @addtogroup ADC_Exported_Functions_Group3
+ * @{
+ */
+HAL_StatusTypeDef HAL_ADC_ConfigChannel(ADC_HandleTypeDef* hadc, ADC_ChannelConfTypeDef* sConfig);
+HAL_StatusTypeDef HAL_ADC_AnalogWDGConfig(ADC_HandleTypeDef* hadc, ADC_AnalogWDGConfTypeDef* AnalogWDGConfig);
+/**
+ * @}
+ */
+
+
+/* Peripheral State functions *************************************************/
+/** @addtogroup ADC_Exported_Functions_Group4
+ * @{
+ */
+uint32_t HAL_ADC_GetState(ADC_HandleTypeDef* hadc);
+uint32_t HAL_ADC_GetError(ADC_HandleTypeDef *hadc);
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* STM32F0xx_HAL_ADC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_adc_ex.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_adc_ex.h
new file mode 100644
index 0000000..96e74cc
--- /dev/null
+++ b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_adc_ex.h
@@ -0,0 +1,299 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_adc_ex.h
+ * @author MCD Application Team
+ * @brief Header file of ADC HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_ADC_EX_H
+#define __STM32F0xx_HAL_ADC_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup ADCEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup ADC_Exported_Constants ADC Exported Constants
+ * @{
+ */
+
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
+#define ADC_CCR_ALL (ADC_CCR_VBATEN | ADC_CCR_TSEN | ADC_CCR_VREFEN)
+#else
+#define ADC_CCR_ALL (ADC_CCR_TSEN | ADC_CCR_VREFEN)
+#endif
+
+/** @defgroup ADC_External_trigger_source_Regular ADC External trigger source Regular
+ * @{
+ */
+/* List of external triggers with generic trigger name, sorted by trigger */
+/* name: */
+
+/* External triggers of regular group for ADC1 */
+#define ADC_EXTERNALTRIGCONV_T1_TRGO ADC1_2_EXTERNALTRIG_T1_TRGO
+#define ADC_EXTERNALTRIGCONV_T1_CC4 ADC1_2_EXTERNALTRIG_T1_CC4
+#define ADC_EXTERNALTRIGCONV_T3_TRGO ADC1_2_EXTERNALTRIG_T3_TRGO
+#define ADC_SOFTWARE_START (ADC_CFGR1_EXTSEL + 1U)
+
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
+#define ADC_EXTERNALTRIGCONV_T2_TRGO ADC1_2_EXTERNALTRIG_T2_TRGO
+#endif
+
+#if !defined(STM32F030x6) && !defined(STM32F070x6) && !defined(STM32F042x6)
+#define ADC_EXTERNALTRIGCONV_T15_TRGO ADC1_2_EXTERNALTRIG_T15_TRGO
+#endif
+
+/**
+ * @}
+ */
+
+
+/** @defgroup ADC_channels ADC channels
+ * @{
+ */
+/* Note: Depending on devices, some channels may not be available on package */
+/* pins. Refer to device datasheet for channels availability. */
+/* Note: Channels are used by bitfields for setting of channel selection */
+/* (register ADC_CHSELR) and used by number for setting of analog */
+/* watchdog channel (bits AWDCH in register ADC_CFGR1). */
+/* Channels are defined with decimal numbers and converted them to */
+/* bitfields when needed. */
+#define ADC_CHANNEL_0 ( 0x00000000U)
+#define ADC_CHANNEL_1 ( 0x00000001U)
+#define ADC_CHANNEL_2 ( 0x00000002U)
+#define ADC_CHANNEL_3 ( 0x00000003U)
+#define ADC_CHANNEL_4 ( 0x00000004U)
+#define ADC_CHANNEL_5 ( 0x00000005U)
+#define ADC_CHANNEL_6 ( 0x00000006U)
+#define ADC_CHANNEL_7 ( 0x00000007U)
+#define ADC_CHANNEL_8 ( 0x00000008U)
+#define ADC_CHANNEL_9 ( 0x00000009U)
+#define ADC_CHANNEL_10 ( 0x0000000AU)
+#define ADC_CHANNEL_11 ( 0x0000000BU)
+#define ADC_CHANNEL_12 ( 0x0000000CU)
+#define ADC_CHANNEL_13 ( 0x0000000DU)
+#define ADC_CHANNEL_14 ( 0x0000000EU)
+#define ADC_CHANNEL_15 ( 0x0000000FU)
+#define ADC_CHANNEL_16 ( 0x00000010U)
+#define ADC_CHANNEL_17 ( 0x00000011U)
+
+#define ADC_CHANNEL_TEMPSENSOR ADC_CHANNEL_16
+#define ADC_CHANNEL_VREFINT ADC_CHANNEL_17
+
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
+#define ADC_CHANNEL_18 ( 0x00000012U)
+#define ADC_CHANNEL_VBAT ADC_CHANNEL_18
+#endif
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+
+/* Private macros ------------------------------------------------------------*/
+
+/** @defgroup ADCEx_Private_Macros ADCEx Private Macros
+ * @{
+ */
+/* Macro reserved for internal HAL driver usage, not intended to be used in */
+/* code of final user. */
+
+/**
+ * @brief Test if the selected ADC channel is an internal channel
+ * VrefInt/TempSensor/Vbat
+ * Note: On STM32F0, availability of internal channel Vbat depends on
+ * devices lines.
+ * @param __CHANNEL__ ADC channel
+ * @retval None
+ */
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
+#define ADC_IS_CHANNEL_INTERNAL(__CHANNEL__) \
+ (((__CHANNEL__) == ADC_CHANNEL_TEMPSENSOR) || \
+ ((__CHANNEL__) == ADC_CHANNEL_VREFINT) || \
+ ((__CHANNEL__) == ADC_CHANNEL_VBAT) \
+ )
+#else
+#define ADC_IS_CHANNEL_INTERNAL(__CHANNEL__) \
+ (((__CHANNEL__) == ADC_CHANNEL_TEMPSENSOR) || \
+ ((__CHANNEL__) == ADC_CHANNEL_VREFINT) \
+ )
+#endif
+
+/**
+ * @brief Select the internal measurement path to be enabled/disabled
+ * corresponding to the selected ADC internal channel
+ * VrefInt/TempSensor/Vbat.
+ * Note: On STM32F0, availability of internal channel Vbat depends on
+ * devices lines.
+ * @param __CHANNEL__ ADC channel
+ * @retval Bit of register ADC_CCR
+ */
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
+#define ADC_CHANNEL_INTERNAL_PATH(__CHANNEL__) \
+ (( (__CHANNEL__) == ADC_CHANNEL_TEMPSENSOR \
+ )? \
+ (ADC_CCR_TSEN) \
+ : \
+ ( \
+ ( (__CHANNEL__) == ADC_CHANNEL_VREFINT \
+ )? \
+ (ADC_CCR_VREFEN) \
+ : \
+ (ADC_CCR_VBATEN) \
+ ) \
+ )
+#else
+#define ADC_CHANNEL_INTERNAL_PATH(__CHANNEL__) \
+ (( (__CHANNEL__) == ADC_CHANNEL_TEMPSENSOR \
+ )? \
+ (ADC_CCR_TSEN) \
+ : \
+ (ADC_CCR_VREFEN) \
+ )
+#endif
+
+
+#if defined (STM32F030x6) || defined (STM32F070x6)
+#define IS_ADC_EXTTRIG(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC4) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_TRGO) || \
+ ((REGTRIG) == ADC_SOFTWARE_START))
+#elif defined (STM32F042x6)
+#define IS_ADC_EXTTRIG(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC4) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_TRGO) || \
+ ((REGTRIG) == ADC_SOFTWARE_START))
+
+#elif defined (STM32F030xC) || defined (STM32F070xB) || defined (STM32F030x8)
+#define IS_ADC_EXTTRIG(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC4) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T15_TRGO) || \
+ ((REGTRIG) == ADC_SOFTWARE_START))
+#else
+#define IS_ADC_EXTTRIG(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC4) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T15_TRGO) || \
+ ((REGTRIG) == ADC_SOFTWARE_START))
+#endif
+
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
+#define IS_ADC_CHANNEL(CHANNEL) (((CHANNEL) == ADC_CHANNEL_0) || \
+ ((CHANNEL) == ADC_CHANNEL_1) || \
+ ((CHANNEL) == ADC_CHANNEL_2) || \
+ ((CHANNEL) == ADC_CHANNEL_3) || \
+ ((CHANNEL) == ADC_CHANNEL_4) || \
+ ((CHANNEL) == ADC_CHANNEL_5) || \
+ ((CHANNEL) == ADC_CHANNEL_6) || \
+ ((CHANNEL) == ADC_CHANNEL_7) || \
+ ((CHANNEL) == ADC_CHANNEL_8) || \
+ ((CHANNEL) == ADC_CHANNEL_9) || \
+ ((CHANNEL) == ADC_CHANNEL_10) || \
+ ((CHANNEL) == ADC_CHANNEL_11) || \
+ ((CHANNEL) == ADC_CHANNEL_12) || \
+ ((CHANNEL) == ADC_CHANNEL_13) || \
+ ((CHANNEL) == ADC_CHANNEL_14) || \
+ ((CHANNEL) == ADC_CHANNEL_15) || \
+ ((CHANNEL) == ADC_CHANNEL_TEMPSENSOR) || \
+ ((CHANNEL) == ADC_CHANNEL_VREFINT) || \
+ ((CHANNEL) == ADC_CHANNEL_VBAT) )
+#else
+#define IS_ADC_CHANNEL(CHANNEL) (((CHANNEL) == ADC_CHANNEL_0) || \
+ ((CHANNEL) == ADC_CHANNEL_1) || \
+ ((CHANNEL) == ADC_CHANNEL_2) || \
+ ((CHANNEL) == ADC_CHANNEL_3) || \
+ ((CHANNEL) == ADC_CHANNEL_4) || \
+ ((CHANNEL) == ADC_CHANNEL_5) || \
+ ((CHANNEL) == ADC_CHANNEL_6) || \
+ ((CHANNEL) == ADC_CHANNEL_7) || \
+ ((CHANNEL) == ADC_CHANNEL_8) || \
+ ((CHANNEL) == ADC_CHANNEL_9) || \
+ ((CHANNEL) == ADC_CHANNEL_10) || \
+ ((CHANNEL) == ADC_CHANNEL_11) || \
+ ((CHANNEL) == ADC_CHANNEL_12) || \
+ ((CHANNEL) == ADC_CHANNEL_13) || \
+ ((CHANNEL) == ADC_CHANNEL_14) || \
+ ((CHANNEL) == ADC_CHANNEL_15) || \
+ ((CHANNEL) == ADC_CHANNEL_TEMPSENSOR) || \
+ ((CHANNEL) == ADC_CHANNEL_VREFINT) )
+#endif
+
+/**
+ * @}
+ */
+
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup ADCEx_Exported_Functions
+ * @{
+ */
+
+/* IO operation functions *****************************************************/
+/** @addtogroup ADCEx_Exported_Functions_Group1
+ * @{
+ */
+
+/* ADC calibration */
+HAL_StatusTypeDef HAL_ADCEx_Calibration_Start(ADC_HandleTypeDef* hadc);
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_ADC_EX_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_can.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_can.h
new file mode 100644
index 0000000..66817b1
--- /dev/null
+++ b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_can.h
@@ -0,0 +1,842 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_can.h
+ * @author MCD Application Team
+ * @brief Header file of CAN HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32F0xx_HAL_CAN_H
+#define STM32F0xx_HAL_CAN_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+#if defined (CAN)
+/** @addtogroup CAN
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup CAN_Exported_Types CAN Exported Types
+ * @{
+ */
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_CAN_STATE_RESET = 0x00U, /*!< CAN not yet initialized or disabled */
+ HAL_CAN_STATE_READY = 0x01U, /*!< CAN initialized and ready for use */
+ HAL_CAN_STATE_LISTENING = 0x02U, /*!< CAN receive process is ongoing */
+ HAL_CAN_STATE_SLEEP_PENDING = 0x03U, /*!< CAN sleep request is pending */
+ HAL_CAN_STATE_SLEEP_ACTIVE = 0x04U, /*!< CAN sleep mode is active */
+ HAL_CAN_STATE_ERROR = 0x05U /*!< CAN error state */
+
+} HAL_CAN_StateTypeDef;
+
+/**
+ * @brief CAN init structure definition
+ */
+typedef struct
+{
+ uint32_t Prescaler; /*!< Specifies the length of a time quantum.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 1024. */
+
+ uint32_t Mode; /*!< Specifies the CAN operating mode.
+ This parameter can be a value of @ref CAN_operating_mode */
+
+ uint32_t SyncJumpWidth; /*!< Specifies the maximum number of time quanta the CAN hardware
+ is allowed to lengthen or shorten a bit to perform resynchronization.
+ This parameter can be a value of @ref CAN_synchronisation_jump_width */
+
+ uint32_t TimeSeg1; /*!< Specifies the number of time quanta in Bit Segment 1.
+ This parameter can be a value of @ref CAN_time_quantum_in_bit_segment_1 */
+
+ uint32_t TimeSeg2; /*!< Specifies the number of time quanta in Bit Segment 2.
+ This parameter can be a value of @ref CAN_time_quantum_in_bit_segment_2 */
+
+ FunctionalState TimeTriggeredMode; /*!< Enable or disable the time triggered communication mode.
+ This parameter can be set to ENABLE or DISABLE. */
+
+ FunctionalState AutoBusOff; /*!< Enable or disable the automatic bus-off management.
+ This parameter can be set to ENABLE or DISABLE. */
+
+ FunctionalState AutoWakeUp; /*!< Enable or disable the automatic wake-up mode.
+ This parameter can be set to ENABLE or DISABLE. */
+
+ FunctionalState AutoRetransmission; /*!< Enable or disable the non-automatic retransmission mode.
+ This parameter can be set to ENABLE or DISABLE. */
+
+ FunctionalState ReceiveFifoLocked; /*!< Enable or disable the Receive FIFO Locked mode.
+ This parameter can be set to ENABLE or DISABLE. */
+
+ FunctionalState TransmitFifoPriority;/*!< Enable or disable the transmit FIFO priority.
+ This parameter can be set to ENABLE or DISABLE. */
+
+} CAN_InitTypeDef;
+
+/**
+ * @brief CAN filter configuration structure definition
+ */
+typedef struct
+{
+ uint32_t FilterIdHigh; /*!< Specifies the filter identification number (MSBs for a 32-bit
+ configuration, first one for a 16-bit configuration).
+ This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
+
+ uint32_t FilterIdLow; /*!< Specifies the filter identification number (LSBs for a 32-bit
+ configuration, second one for a 16-bit configuration).
+ This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
+
+ uint32_t FilterMaskIdHigh; /*!< Specifies the filter mask number or identification number,
+ according to the mode (MSBs for a 32-bit configuration,
+ first one for a 16-bit configuration).
+ This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
+
+ uint32_t FilterMaskIdLow; /*!< Specifies the filter mask number or identification number,
+ according to the mode (LSBs for a 32-bit configuration,
+ second one for a 16-bit configuration).
+ This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
+
+ uint32_t FilterFIFOAssignment; /*!< Specifies the FIFO (0 or 1U) which will be assigned to the filter.
+ This parameter can be a value of @ref CAN_filter_FIFO */
+
+ uint32_t FilterBank; /*!< Specifies the filter bank which will be initialized.
+ This parameter mus be a number between Min_Data = 0 and Max_Data = 13. */
+
+ uint32_t FilterMode; /*!< Specifies the filter mode to be initialized.
+ This parameter can be a value of @ref CAN_filter_mode */
+
+ uint32_t FilterScale; /*!< Specifies the filter scale.
+ This parameter can be a value of @ref CAN_filter_scale */
+
+ uint32_t FilterActivation; /*!< Enable or disable the filter.
+ This parameter can be a value of @ref CAN_filter_activation */
+
+ uint32_t SlaveStartFilterBank; /*!< Select the start filter bank for the slave CAN instance.
+ STM32F0xx devices don't support slave CAN instance (dual CAN). Therefore
+ this parameter is meaningless but it has been kept for compatibility accross
+ STM32 families. */
+
+} CAN_FilterTypeDef;
+
+/**
+ * @brief CAN Tx message header structure definition
+ */
+typedef struct
+{
+ uint32_t StdId; /*!< Specifies the standard identifier.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0x7FF. */
+
+ uint32_t ExtId; /*!< Specifies the extended identifier.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0x1FFFFFFF. */
+
+ uint32_t IDE; /*!< Specifies the type of identifier for the message that will be transmitted.
+ This parameter can be a value of @ref CAN_identifier_type */
+
+ uint32_t RTR; /*!< Specifies the type of frame for the message that will be transmitted.
+ This parameter can be a value of @ref CAN_remote_transmission_request */
+
+ uint32_t DLC; /*!< Specifies the length of the frame that will be transmitted.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 8. */
+
+ FunctionalState TransmitGlobalTime; /*!< Specifies whether the timestamp counter value captured on start
+ of frame transmission, is sent in DATA6 and DATA7 replacing pData[6] and pData[7].
+ @note: Time Triggered Communication Mode must be enabled.
+ @note: DLC must be programmed as 8 bytes, in order these 2 bytes are sent.
+ This parameter can be set to ENABLE or DISABLE. */
+
+} CAN_TxHeaderTypeDef;
+
+/**
+ * @brief CAN Rx message header structure definition
+ */
+typedef struct
+{
+ uint32_t StdId; /*!< Specifies the standard identifier.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0x7FF. */
+
+ uint32_t ExtId; /*!< Specifies the extended identifier.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0x1FFFFFFF. */
+
+ uint32_t IDE; /*!< Specifies the type of identifier for the message that will be transmitted.
+ This parameter can be a value of @ref CAN_identifier_type */
+
+ uint32_t RTR; /*!< Specifies the type of frame for the message that will be transmitted.
+ This parameter can be a value of @ref CAN_remote_transmission_request */
+
+ uint32_t DLC; /*!< Specifies the length of the frame that will be transmitted.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 8. */
+
+ uint32_t Timestamp; /*!< Specifies the timestamp counter value captured on start of frame reception.
+ @note: Time Triggered Communication Mode must be enabled.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0xFFFF. */
+
+ uint32_t FilterMatchIndex; /*!< Specifies the index of matching acceptance filter element.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0xFF. */
+
+} CAN_RxHeaderTypeDef;
+
+/**
+ * @brief CAN handle Structure definition
+ */
+typedef struct __CAN_HandleTypeDef
+{
+ CAN_TypeDef *Instance; /*!< Register base address */
+
+ CAN_InitTypeDef Init; /*!< CAN required parameters */
+
+ __IO HAL_CAN_StateTypeDef State; /*!< CAN communication state */
+
+ __IO uint32_t ErrorCode; /*!< CAN Error code.
+ This parameter can be a value of @ref CAN_Error_Code */
+
+#if USE_HAL_CAN_REGISTER_CALLBACKS == 1
+ void (* TxMailbox0CompleteCallback)(struct __CAN_HandleTypeDef *hcan);/*!< CAN Tx Mailbox 0 complete callback */
+ void (* TxMailbox1CompleteCallback)(struct __CAN_HandleTypeDef *hcan);/*!< CAN Tx Mailbox 1 complete callback */
+ void (* TxMailbox2CompleteCallback)(struct __CAN_HandleTypeDef *hcan);/*!< CAN Tx Mailbox 2 complete callback */
+ void (* TxMailbox0AbortCallback)(struct __CAN_HandleTypeDef *hcan); /*!< CAN Tx Mailbox 0 abort callback */
+ void (* TxMailbox1AbortCallback)(struct __CAN_HandleTypeDef *hcan); /*!< CAN Tx Mailbox 1 abort callback */
+ void (* TxMailbox2AbortCallback)(struct __CAN_HandleTypeDef *hcan); /*!< CAN Tx Mailbox 2 abort callback */
+ void (* RxFifo0MsgPendingCallback)(struct __CAN_HandleTypeDef *hcan); /*!< CAN Rx FIFO 0 msg pending callback */
+ void (* RxFifo0FullCallback)(struct __CAN_HandleTypeDef *hcan); /*!< CAN Rx FIFO 0 full callback */
+ void (* RxFifo1MsgPendingCallback)(struct __CAN_HandleTypeDef *hcan); /*!< CAN Rx FIFO 1 msg pending callback */
+ void (* RxFifo1FullCallback)(struct __CAN_HandleTypeDef *hcan); /*!< CAN Rx FIFO 1 full callback */
+ void (* SleepCallback)(struct __CAN_HandleTypeDef *hcan); /*!< CAN Sleep callback */
+ void (* WakeUpFromRxMsgCallback)(struct __CAN_HandleTypeDef *hcan); /*!< CAN Wake Up from Rx msg callback */
+ void (* ErrorCallback)(struct __CAN_HandleTypeDef *hcan); /*!< CAN Error callback */
+
+ void (* MspInitCallback)(struct __CAN_HandleTypeDef *hcan); /*!< CAN Msp Init callback */
+ void (* MspDeInitCallback)(struct __CAN_HandleTypeDef *hcan); /*!< CAN Msp DeInit callback */
+
+#endif /* (USE_HAL_CAN_REGISTER_CALLBACKS) */
+} CAN_HandleTypeDef;
+
+#if USE_HAL_CAN_REGISTER_CALLBACKS == 1
+/**
+ * @brief HAL CAN common Callback ID enumeration definition
+ */
+typedef enum
+{
+ HAL_CAN_TX_MAILBOX0_COMPLETE_CB_ID = 0x00U, /*!< CAN Tx Mailbox 0 complete callback ID */
+ HAL_CAN_TX_MAILBOX1_COMPLETE_CB_ID = 0x01U, /*!< CAN Tx Mailbox 1 complete callback ID */
+ HAL_CAN_TX_MAILBOX2_COMPLETE_CB_ID = 0x02U, /*!< CAN Tx Mailbox 2 complete callback ID */
+ HAL_CAN_TX_MAILBOX0_ABORT_CB_ID = 0x03U, /*!< CAN Tx Mailbox 0 abort callback ID */
+ HAL_CAN_TX_MAILBOX1_ABORT_CB_ID = 0x04U, /*!< CAN Tx Mailbox 1 abort callback ID */
+ HAL_CAN_TX_MAILBOX2_ABORT_CB_ID = 0x05U, /*!< CAN Tx Mailbox 2 abort callback ID */
+ HAL_CAN_RX_FIFO0_MSG_PENDING_CB_ID = 0x06U, /*!< CAN Rx FIFO 0 message pending callback ID */
+ HAL_CAN_RX_FIFO0_FULL_CB_ID = 0x07U, /*!< CAN Rx FIFO 0 full callback ID */
+ HAL_CAN_RX_FIFO1_MSG_PENDING_CB_ID = 0x08U, /*!< CAN Rx FIFO 1 message pending callback ID */
+ HAL_CAN_RX_FIFO1_FULL_CB_ID = 0x09U, /*!< CAN Rx FIFO 1 full callback ID */
+ HAL_CAN_SLEEP_CB_ID = 0x0AU, /*!< CAN Sleep callback ID */
+ HAL_CAN_WAKEUP_FROM_RX_MSG_CB_ID = 0x0BU, /*!< CAN Wake Up fropm Rx msg callback ID */
+ HAL_CAN_ERROR_CB_ID = 0x0CU, /*!< CAN Error callback ID */
+
+ HAL_CAN_MSPINIT_CB_ID = 0x0DU, /*!< CAN MspInit callback ID */
+ HAL_CAN_MSPDEINIT_CB_ID = 0x0EU, /*!< CAN MspDeInit callback ID */
+
+} HAL_CAN_CallbackIDTypeDef;
+
+/**
+ * @brief HAL CAN Callback pointer definition
+ */
+typedef void (*pCAN_CallbackTypeDef)(CAN_HandleTypeDef *hcan); /*!< pointer to a CAN callback function */
+
+#endif /* USE_HAL_CAN_REGISTER_CALLBACKS */
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup CAN_Exported_Constants CAN Exported Constants
+ * @{
+ */
+
+/** @defgroup CAN_Error_Code CAN Error Code
+ * @{
+ */
+#define HAL_CAN_ERROR_NONE (0x00000000U) /*!< No error */
+#define HAL_CAN_ERROR_EWG (0x00000001U) /*!< Protocol Error Warning */
+#define HAL_CAN_ERROR_EPV (0x00000002U) /*!< Error Passive */
+#define HAL_CAN_ERROR_BOF (0x00000004U) /*!< Bus-off error */
+#define HAL_CAN_ERROR_STF (0x00000008U) /*!< Stuff error */
+#define HAL_CAN_ERROR_FOR (0x00000010U) /*!< Form error */
+#define HAL_CAN_ERROR_ACK (0x00000020U) /*!< Acknowledgment error */
+#define HAL_CAN_ERROR_BR (0x00000040U) /*!< Bit recessive error */
+#define HAL_CAN_ERROR_BD (0x00000080U) /*!< Bit dominant error */
+#define HAL_CAN_ERROR_CRC (0x00000100U) /*!< CRC error */
+#define HAL_CAN_ERROR_RX_FOV0 (0x00000200U) /*!< Rx FIFO0 overrun error */
+#define HAL_CAN_ERROR_RX_FOV1 (0x00000400U) /*!< Rx FIFO1 overrun error */
+#define HAL_CAN_ERROR_TX_ALST0 (0x00000800U) /*!< TxMailbox 0 transmit failure due to arbitration lost */
+#define HAL_CAN_ERROR_TX_TERR0 (0x00001000U) /*!< TxMailbox 1 transmit failure due to tranmit error */
+#define HAL_CAN_ERROR_TX_ALST1 (0x00002000U) /*!< TxMailbox 0 transmit failure due to arbitration lost */
+#define HAL_CAN_ERROR_TX_TERR1 (0x00004000U) /*!< TxMailbox 1 transmit failure due to tranmit error */
+#define HAL_CAN_ERROR_TX_ALST2 (0x00008000U) /*!< TxMailbox 0 transmit failure due to arbitration lost */
+#define HAL_CAN_ERROR_TX_TERR2 (0x00010000U) /*!< TxMailbox 1 transmit failure due to tranmit error */
+#define HAL_CAN_ERROR_TIMEOUT (0x00020000U) /*!< Timeout error */
+#define HAL_CAN_ERROR_NOT_INITIALIZED (0x00040000U) /*!< Peripheral not initialized */
+#define HAL_CAN_ERROR_NOT_READY (0x00080000U) /*!< Peripheral not ready */
+#define HAL_CAN_ERROR_NOT_STARTED (0x00100000U) /*!< Peripheral not started */
+#define HAL_CAN_ERROR_PARAM (0x00200000U) /*!< Parameter error */
+
+#if USE_HAL_CAN_REGISTER_CALLBACKS == 1
+#define HAL_CAN_ERROR_INVALID_CALLBACK (0x00400000U) /*!< Invalid Callback error */
+#endif /* USE_HAL_CAN_REGISTER_CALLBACKS */
+#define HAL_CAN_ERROR_INTERNAL (0x00800000U) /*!< Internal error */
+
+/**
+ * @}
+ */
+
+/** @defgroup CAN_InitStatus CAN InitStatus
+ * @{
+ */
+#define CAN_INITSTATUS_FAILED (0x00000000U) /*!< CAN initialization failed */
+#define CAN_INITSTATUS_SUCCESS (0x00000001U) /*!< CAN initialization OK */
+/**
+ * @}
+ */
+
+/** @defgroup CAN_operating_mode CAN Operating Mode
+ * @{
+ */
+#define CAN_MODE_NORMAL (0x00000000U) /*!< Normal mode */
+#define CAN_MODE_LOOPBACK ((uint32_t)CAN_BTR_LBKM) /*!< Loopback mode */
+#define CAN_MODE_SILENT ((uint32_t)CAN_BTR_SILM) /*!< Silent mode */
+#define CAN_MODE_SILENT_LOOPBACK ((uint32_t)(CAN_BTR_LBKM | CAN_BTR_SILM)) /*!< Loopback combined with silent mode */
+/**
+ * @}
+ */
+
+
+/** @defgroup CAN_synchronisation_jump_width CAN Synchronization Jump Width
+ * @{
+ */
+#define CAN_SJW_1TQ (0x00000000U) /*!< 1 time quantum */
+#define CAN_SJW_2TQ ((uint32_t)CAN_BTR_SJW_0) /*!< 2 time quantum */
+#define CAN_SJW_3TQ ((uint32_t)CAN_BTR_SJW_1) /*!< 3 time quantum */
+#define CAN_SJW_4TQ ((uint32_t)CAN_BTR_SJW) /*!< 4 time quantum */
+/**
+ * @}
+ */
+
+/** @defgroup CAN_time_quantum_in_bit_segment_1 CAN Time Quantum in Bit Segment 1
+ * @{
+ */
+#define CAN_BS1_1TQ (0x00000000U) /*!< 1 time quantum */
+#define CAN_BS1_2TQ ((uint32_t)CAN_BTR_TS1_0) /*!< 2 time quantum */
+#define CAN_BS1_3TQ ((uint32_t)CAN_BTR_TS1_1) /*!< 3 time quantum */
+#define CAN_BS1_4TQ ((uint32_t)(CAN_BTR_TS1_1 | CAN_BTR_TS1_0)) /*!< 4 time quantum */
+#define CAN_BS1_5TQ ((uint32_t)CAN_BTR_TS1_2) /*!< 5 time quantum */
+#define CAN_BS1_6TQ ((uint32_t)(CAN_BTR_TS1_2 | CAN_BTR_TS1_0)) /*!< 6 time quantum */
+#define CAN_BS1_7TQ ((uint32_t)(CAN_BTR_TS1_2 | CAN_BTR_TS1_1)) /*!< 7 time quantum */
+#define CAN_BS1_8TQ ((uint32_t)(CAN_BTR_TS1_2 | CAN_BTR_TS1_1 | CAN_BTR_TS1_0)) /*!< 8 time quantum */
+#define CAN_BS1_9TQ ((uint32_t)CAN_BTR_TS1_3) /*!< 9 time quantum */
+#define CAN_BS1_10TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_0)) /*!< 10 time quantum */
+#define CAN_BS1_11TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_1)) /*!< 11 time quantum */
+#define CAN_BS1_12TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_1 | CAN_BTR_TS1_0)) /*!< 12 time quantum */
+#define CAN_BS1_13TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_2)) /*!< 13 time quantum */
+#define CAN_BS1_14TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_2 | CAN_BTR_TS1_0)) /*!< 14 time quantum */
+#define CAN_BS1_15TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_2 | CAN_BTR_TS1_1)) /*!< 15 time quantum */
+#define CAN_BS1_16TQ ((uint32_t)CAN_BTR_TS1) /*!< 16 time quantum */
+/**
+ * @}
+ */
+
+/** @defgroup CAN_time_quantum_in_bit_segment_2 CAN Time Quantum in Bit Segment 2
+ * @{
+ */
+#define CAN_BS2_1TQ (0x00000000U) /*!< 1 time quantum */
+#define CAN_BS2_2TQ ((uint32_t)CAN_BTR_TS2_0) /*!< 2 time quantum */
+#define CAN_BS2_3TQ ((uint32_t)CAN_BTR_TS2_1) /*!< 3 time quantum */
+#define CAN_BS2_4TQ ((uint32_t)(CAN_BTR_TS2_1 | CAN_BTR_TS2_0)) /*!< 4 time quantum */
+#define CAN_BS2_5TQ ((uint32_t)CAN_BTR_TS2_2) /*!< 5 time quantum */
+#define CAN_BS2_6TQ ((uint32_t)(CAN_BTR_TS2_2 | CAN_BTR_TS2_0)) /*!< 6 time quantum */
+#define CAN_BS2_7TQ ((uint32_t)(CAN_BTR_TS2_2 | CAN_BTR_TS2_1)) /*!< 7 time quantum */
+#define CAN_BS2_8TQ ((uint32_t)CAN_BTR_TS2) /*!< 8 time quantum */
+/**
+ * @}
+ */
+
+/** @defgroup CAN_filter_mode CAN Filter Mode
+ * @{
+ */
+#define CAN_FILTERMODE_IDMASK (0x00000000U) /*!< Identifier mask mode */
+#define CAN_FILTERMODE_IDLIST (0x00000001U) /*!< Identifier list mode */
+/**
+ * @}
+ */
+
+/** @defgroup CAN_filter_scale CAN Filter Scale
+ * @{
+ */
+#define CAN_FILTERSCALE_16BIT (0x00000000U) /*!< Two 16-bit filters */
+#define CAN_FILTERSCALE_32BIT (0x00000001U) /*!< One 32-bit filter */
+/**
+ * @}
+ */
+
+/** @defgroup CAN_filter_activation CAN Filter Activation
+ * @{
+ */
+#define CAN_FILTER_DISABLE (0x00000000U) /*!< Disable filter */
+#define CAN_FILTER_ENABLE (0x00000001U) /*!< Enable filter */
+/**
+ * @}
+ */
+
+/** @defgroup CAN_filter_FIFO CAN Filter FIFO
+ * @{
+ */
+#define CAN_FILTER_FIFO0 (0x00000000U) /*!< Filter FIFO 0 assignment for filter x */
+#define CAN_FILTER_FIFO1 (0x00000001U) /*!< Filter FIFO 1 assignment for filter x */
+/**
+ * @}
+ */
+
+/** @defgroup CAN_identifier_type CAN Identifier Type
+ * @{
+ */
+#define CAN_ID_STD (0x00000000U) /*!< Standard Id */
+#define CAN_ID_EXT (0x00000004U) /*!< Extended Id */
+/**
+ * @}
+ */
+
+/** @defgroup CAN_remote_transmission_request CAN Remote Transmission Request
+ * @{
+ */
+#define CAN_RTR_DATA (0x00000000U) /*!< Data frame */
+#define CAN_RTR_REMOTE (0x00000002U) /*!< Remote frame */
+/**
+ * @}
+ */
+
+/** @defgroup CAN_receive_FIFO_number CAN Receive FIFO Number
+ * @{
+ */
+#define CAN_RX_FIFO0 (0x00000000U) /*!< CAN receive FIFO 0 */
+#define CAN_RX_FIFO1 (0x00000001U) /*!< CAN receive FIFO 1 */
+/**
+ * @}
+ */
+
+/** @defgroup CAN_Tx_Mailboxes CAN Tx Mailboxes
+ * @{
+ */
+#define CAN_TX_MAILBOX0 (0x00000001U) /*!< Tx Mailbox 0 */
+#define CAN_TX_MAILBOX1 (0x00000002U) /*!< Tx Mailbox 1 */
+#define CAN_TX_MAILBOX2 (0x00000004U) /*!< Tx Mailbox 2 */
+/**
+ * @}
+ */
+
+/** @defgroup CAN_flags CAN Flags
+ * @{
+ */
+/* Transmit Flags */
+#define CAN_FLAG_RQCP0 (0x00000500U) /*!< Request complete MailBox 0 flag */
+#define CAN_FLAG_TXOK0 (0x00000501U) /*!< Transmission OK MailBox 0 flag */
+#define CAN_FLAG_ALST0 (0x00000502U) /*!< Arbitration Lost MailBox 0 flag */
+#define CAN_FLAG_TERR0 (0x00000503U) /*!< Transmission error MailBox 0 flag */
+#define CAN_FLAG_RQCP1 (0x00000508U) /*!< Request complete MailBox1 flag */
+#define CAN_FLAG_TXOK1 (0x00000509U) /*!< Transmission OK MailBox 1 flag */
+#define CAN_FLAG_ALST1 (0x0000050AU) /*!< Arbitration Lost MailBox 1 flag */
+#define CAN_FLAG_TERR1 (0x0000050BU) /*!< Transmission error MailBox 1 flag */
+#define CAN_FLAG_RQCP2 (0x00000510U) /*!< Request complete MailBox2 flag */
+#define CAN_FLAG_TXOK2 (0x00000511U) /*!< Transmission OK MailBox 2 flag */
+#define CAN_FLAG_ALST2 (0x00000512U) /*!< Arbitration Lost MailBox 2 flag */
+#define CAN_FLAG_TERR2 (0x00000513U) /*!< Transmission error MailBox 2 flag */
+#define CAN_FLAG_TME0 (0x0000051AU) /*!< Transmit mailbox 0 empty flag */
+#define CAN_FLAG_TME1 (0x0000051BU) /*!< Transmit mailbox 1 empty flag */
+#define CAN_FLAG_TME2 (0x0000051CU) /*!< Transmit mailbox 2 empty flag */
+#define CAN_FLAG_LOW0 (0x0000051DU) /*!< Lowest priority mailbox 0 flag */
+#define CAN_FLAG_LOW1 (0x0000051EU) /*!< Lowest priority mailbox 1 flag */
+#define CAN_FLAG_LOW2 (0x0000051FU) /*!< Lowest priority mailbox 2 flag */
+
+/* Receive Flags */
+#define CAN_FLAG_FF0 (0x00000203U) /*!< RX FIFO 0 Full flag */
+#define CAN_FLAG_FOV0 (0x00000204U) /*!< RX FIFO 0 Overrun flag */
+#define CAN_FLAG_FF1 (0x00000403U) /*!< RX FIFO 1 Full flag */
+#define CAN_FLAG_FOV1 (0x00000404U) /*!< RX FIFO 1 Overrun flag */
+
+/* Operating Mode Flags */
+#define CAN_FLAG_INAK (0x00000100U) /*!< Initialization acknowledge flag */
+#define CAN_FLAG_SLAK (0x00000101U) /*!< Sleep acknowledge flag */
+#define CAN_FLAG_ERRI (0x00000102U) /*!< Error flag */
+#define CAN_FLAG_WKU (0x00000103U) /*!< Wake up interrupt flag */
+#define CAN_FLAG_SLAKI (0x00000104U) /*!< Sleep acknowledge interrupt flag */
+
+/* Error Flags */
+#define CAN_FLAG_EWG (0x00000300U) /*!< Error warning flag */
+#define CAN_FLAG_EPV (0x00000301U) /*!< Error passive flag */
+#define CAN_FLAG_BOF (0x00000302U) /*!< Bus-Off flag */
+/**
+ * @}
+ */
+
+
+/** @defgroup CAN_Interrupts CAN Interrupts
+ * @{
+ */
+/* Transmit Interrupt */
+#define CAN_IT_TX_MAILBOX_EMPTY ((uint32_t)CAN_IER_TMEIE) /*!< Transmit mailbox empty interrupt */
+
+/* Receive Interrupts */
+#define CAN_IT_RX_FIFO0_MSG_PENDING ((uint32_t)CAN_IER_FMPIE0) /*!< FIFO 0 message pending interrupt */
+#define CAN_IT_RX_FIFO0_FULL ((uint32_t)CAN_IER_FFIE0) /*!< FIFO 0 full interrupt */
+#define CAN_IT_RX_FIFO0_OVERRUN ((uint32_t)CAN_IER_FOVIE0) /*!< FIFO 0 overrun interrupt */
+#define CAN_IT_RX_FIFO1_MSG_PENDING ((uint32_t)CAN_IER_FMPIE1) /*!< FIFO 1 message pending interrupt */
+#define CAN_IT_RX_FIFO1_FULL ((uint32_t)CAN_IER_FFIE1) /*!< FIFO 1 full interrupt */
+#define CAN_IT_RX_FIFO1_OVERRUN ((uint32_t)CAN_IER_FOVIE1) /*!< FIFO 1 overrun interrupt */
+
+/* Operating Mode Interrupts */
+#define CAN_IT_WAKEUP ((uint32_t)CAN_IER_WKUIE) /*!< Wake-up interrupt */
+#define CAN_IT_SLEEP_ACK ((uint32_t)CAN_IER_SLKIE) /*!< Sleep acknowledge interrupt */
+
+/* Error Interrupts */
+#define CAN_IT_ERROR_WARNING ((uint32_t)CAN_IER_EWGIE) /*!< Error warning interrupt */
+#define CAN_IT_ERROR_PASSIVE ((uint32_t)CAN_IER_EPVIE) /*!< Error passive interrupt */
+#define CAN_IT_BUSOFF ((uint32_t)CAN_IER_BOFIE) /*!< Bus-off interrupt */
+#define CAN_IT_LAST_ERROR_CODE ((uint32_t)CAN_IER_LECIE) /*!< Last error code interrupt */
+#define CAN_IT_ERROR ((uint32_t)CAN_IER_ERRIE) /*!< Error Interrupt */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup CAN_Exported_Macros CAN Exported Macros
+ * @{
+ */
+
+/** @brief Reset CAN handle state
+ * @param __HANDLE__ CAN handle.
+ * @retval None
+ */
+#if USE_HAL_CAN_REGISTER_CALLBACKS == 1
+#define __HAL_CAN_RESET_HANDLE_STATE(__HANDLE__) do{ \
+ (__HANDLE__)->State = HAL_CAN_STATE_RESET; \
+ (__HANDLE__)->MspInitCallback = NULL; \
+ (__HANDLE__)->MspDeInitCallback = NULL; \
+ } while(0)
+#else
+#define __HAL_CAN_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CAN_STATE_RESET)
+#endif /*USE_HAL_CAN_REGISTER_CALLBACKS */
+
+/**
+ * @brief Enable the specified CAN interrupts.
+ * @param __HANDLE__ CAN handle.
+ * @param __INTERRUPT__ CAN Interrupt sources to enable.
+ * This parameter can be any combination of @arg CAN_Interrupts
+ * @retval None
+ */
+#define __HAL_CAN_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IER) |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the specified CAN interrupts.
+ * @param __HANDLE__ CAN handle.
+ * @param __INTERRUPT__ CAN Interrupt sources to disable.
+ * This parameter can be any combination of @arg CAN_Interrupts
+ * @retval None
+ */
+#define __HAL_CAN_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IER) &= ~(__INTERRUPT__))
+
+/** @brief Check if the specified CAN interrupt source is enabled or disabled.
+ * @param __HANDLE__ specifies the CAN Handle.
+ * @param __INTERRUPT__ specifies the CAN interrupt source to check.
+ * This parameter can be a value of @arg CAN_Interrupts
+ * @retval The state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_CAN_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IER) & (__INTERRUPT__))
+
+/** @brief Check whether the specified CAN flag is set or not.
+ * @param __HANDLE__ specifies the CAN Handle.
+ * @param __FLAG__ specifies the flag to check.
+ * This parameter can be one of @arg CAN_flags
+ * @retval The state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_CAN_GET_FLAG(__HANDLE__, __FLAG__) \
+ ((((__FLAG__) >> 8U) == 5U)? ((((__HANDLE__)->Instance->TSR) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__FLAG__) >> 8U) == 2U)? ((((__HANDLE__)->Instance->RF0R) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__FLAG__) >> 8U) == 4U)? ((((__HANDLE__)->Instance->RF1R) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__FLAG__) >> 8U) == 1U)? ((((__HANDLE__)->Instance->MSR) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__FLAG__) >> 8U) == 3U)? ((((__HANDLE__)->Instance->ESR) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))): 0U)
+
+/** @brief Clear the specified CAN pending flag.
+ * @param __HANDLE__ specifies the CAN Handle.
+ * @param __FLAG__ specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg CAN_FLAG_RQCP0: Request complete MailBox 0 Flag
+ * @arg CAN_FLAG_TXOK0: Transmission OK MailBox 0 Flag
+ * @arg CAN_FLAG_ALST0: Arbitration Lost MailBox 0 Flag
+ * @arg CAN_FLAG_TERR0: Transmission error MailBox 0 Flag
+ * @arg CAN_FLAG_RQCP1: Request complete MailBox 1 Flag
+ * @arg CAN_FLAG_TXOK1: Transmission OK MailBox 1 Flag
+ * @arg CAN_FLAG_ALST1: Arbitration Lost MailBox 1 Flag
+ * @arg CAN_FLAG_TERR1: Transmission error MailBox 1 Flag
+ * @arg CAN_FLAG_RQCP2: Request complete MailBox 2 Flag
+ * @arg CAN_FLAG_TXOK2: Transmission OK MailBox 2 Flag
+ * @arg CAN_FLAG_ALST2: Arbitration Lost MailBox 2 Flag
+ * @arg CAN_FLAG_TERR2: Transmission error MailBox 2 Flag
+ * @arg CAN_FLAG_FF0: RX FIFO 0 Full Flag
+ * @arg CAN_FLAG_FOV0: RX FIFO 0 Overrun Flag
+ * @arg CAN_FLAG_FF1: RX FIFO 1 Full Flag
+ * @arg CAN_FLAG_FOV1: RX FIFO 1 Overrun Flag
+ * @arg CAN_FLAG_WKUI: Wake up Interrupt Flag
+ * @arg CAN_FLAG_SLAKI: Sleep acknowledge Interrupt Flag
+ * @retval None
+ */
+#define __HAL_CAN_CLEAR_FLAG(__HANDLE__, __FLAG__) \
+ ((((__FLAG__) >> 8U) == 5U)? (((__HANDLE__)->Instance->TSR) = (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__FLAG__) >> 8U) == 2U)? (((__HANDLE__)->Instance->RF0R) = (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__FLAG__) >> 8U) == 4U)? (((__HANDLE__)->Instance->RF1R) = (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__FLAG__) >> 8U) == 1U)? (((__HANDLE__)->Instance->MSR) = (1U << ((__FLAG__) & CAN_FLAG_MASK))): 0U)
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup CAN_Exported_Functions CAN Exported Functions
+ * @{
+ */
+
+/** @addtogroup CAN_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ * @{
+ */
+
+/* Initialization and de-initialization functions *****************************/
+HAL_StatusTypeDef HAL_CAN_Init(CAN_HandleTypeDef *hcan);
+HAL_StatusTypeDef HAL_CAN_DeInit(CAN_HandleTypeDef *hcan);
+void HAL_CAN_MspInit(CAN_HandleTypeDef *hcan);
+void HAL_CAN_MspDeInit(CAN_HandleTypeDef *hcan);
+
+#if USE_HAL_CAN_REGISTER_CALLBACKS == 1
+/* Callbacks Register/UnRegister functions ***********************************/
+HAL_StatusTypeDef HAL_CAN_RegisterCallback(CAN_HandleTypeDef *hcan, HAL_CAN_CallbackIDTypeDef CallbackID, void (* pCallback)(CAN_HandleTypeDef *_hcan));
+HAL_StatusTypeDef HAL_CAN_UnRegisterCallback(CAN_HandleTypeDef *hcan, HAL_CAN_CallbackIDTypeDef CallbackID);
+
+#endif /* (USE_HAL_CAN_REGISTER_CALLBACKS) */
+/**
+ * @}
+ */
+
+/** @addtogroup CAN_Exported_Functions_Group2 Configuration functions
+ * @brief Configuration functions
+ * @{
+ */
+
+/* Configuration functions ****************************************************/
+HAL_StatusTypeDef HAL_CAN_ConfigFilter(CAN_HandleTypeDef *hcan, CAN_FilterTypeDef *sFilterConfig);
+
+/**
+ * @}
+ */
+
+/** @addtogroup CAN_Exported_Functions_Group3 Control functions
+ * @brief Control functions
+ * @{
+ */
+
+/* Control functions **********************************************************/
+HAL_StatusTypeDef HAL_CAN_Start(CAN_HandleTypeDef *hcan);
+HAL_StatusTypeDef HAL_CAN_Stop(CAN_HandleTypeDef *hcan);
+HAL_StatusTypeDef HAL_CAN_RequestSleep(CAN_HandleTypeDef *hcan);
+HAL_StatusTypeDef HAL_CAN_WakeUp(CAN_HandleTypeDef *hcan);
+uint32_t HAL_CAN_IsSleepActive(CAN_HandleTypeDef *hcan);
+HAL_StatusTypeDef HAL_CAN_AddTxMessage(CAN_HandleTypeDef *hcan, CAN_TxHeaderTypeDef *pHeader, uint8_t aData[], uint32_t *pTxMailbox);
+HAL_StatusTypeDef HAL_CAN_AbortTxRequest(CAN_HandleTypeDef *hcan, uint32_t TxMailboxes);
+uint32_t HAL_CAN_GetTxMailboxesFreeLevel(CAN_HandleTypeDef *hcan);
+uint32_t HAL_CAN_IsTxMessagePending(CAN_HandleTypeDef *hcan, uint32_t TxMailboxes);
+uint32_t HAL_CAN_GetTxTimestamp(CAN_HandleTypeDef *hcan, uint32_t TxMailbox);
+HAL_StatusTypeDef HAL_CAN_GetRxMessage(CAN_HandleTypeDef *hcan, uint32_t RxFifo, CAN_RxHeaderTypeDef *pHeader, uint8_t aData[]);
+uint32_t HAL_CAN_GetRxFifoFillLevel(CAN_HandleTypeDef *hcan, uint32_t RxFifo);
+
+/**
+ * @}
+ */
+
+/** @addtogroup CAN_Exported_Functions_Group4 Interrupts management
+ * @brief Interrupts management
+ * @{
+ */
+/* Interrupts management ******************************************************/
+HAL_StatusTypeDef HAL_CAN_ActivateNotification(CAN_HandleTypeDef *hcan, uint32_t ActiveITs);
+HAL_StatusTypeDef HAL_CAN_DeactivateNotification(CAN_HandleTypeDef *hcan, uint32_t InactiveITs);
+void HAL_CAN_IRQHandler(CAN_HandleTypeDef *hcan);
+
+/**
+ * @}
+ */
+
+/** @addtogroup CAN_Exported_Functions_Group5 Callback functions
+ * @brief Callback functions
+ * @{
+ */
+/* Callbacks functions ********************************************************/
+
+void HAL_CAN_TxMailbox0CompleteCallback(CAN_HandleTypeDef *hcan);
+void HAL_CAN_TxMailbox1CompleteCallback(CAN_HandleTypeDef *hcan);
+void HAL_CAN_TxMailbox2CompleteCallback(CAN_HandleTypeDef *hcan);
+void HAL_CAN_TxMailbox0AbortCallback(CAN_HandleTypeDef *hcan);
+void HAL_CAN_TxMailbox1AbortCallback(CAN_HandleTypeDef *hcan);
+void HAL_CAN_TxMailbox2AbortCallback(CAN_HandleTypeDef *hcan);
+void HAL_CAN_RxFifo0MsgPendingCallback(CAN_HandleTypeDef *hcan);
+void HAL_CAN_RxFifo0FullCallback(CAN_HandleTypeDef *hcan);
+void HAL_CAN_RxFifo1MsgPendingCallback(CAN_HandleTypeDef *hcan);
+void HAL_CAN_RxFifo1FullCallback(CAN_HandleTypeDef *hcan);
+void HAL_CAN_SleepCallback(CAN_HandleTypeDef *hcan);
+void HAL_CAN_WakeUpFromRxMsgCallback(CAN_HandleTypeDef *hcan);
+void HAL_CAN_ErrorCallback(CAN_HandleTypeDef *hcan);
+
+/**
+ * @}
+ */
+
+/** @addtogroup CAN_Exported_Functions_Group6 Peripheral State and Error functions
+ * @brief CAN Peripheral State functions
+ * @{
+ */
+/* Peripheral State and Error functions ***************************************/
+HAL_CAN_StateTypeDef HAL_CAN_GetState(CAN_HandleTypeDef *hcan);
+uint32_t HAL_CAN_GetError(CAN_HandleTypeDef *hcan);
+HAL_StatusTypeDef HAL_CAN_ResetError(CAN_HandleTypeDef *hcan);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/** @defgroup CAN_Private_Types CAN Private Types
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup CAN_Private_Variables CAN Private Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup CAN_Private_Constants CAN Private Constants
+ * @{
+ */
+#define CAN_FLAG_MASK (0x000000FFU)
+/**
+ * @}
+ */
+
+/* Private Macros -----------------------------------------------------------*/
+/** @defgroup CAN_Private_Macros CAN Private Macros
+ * @{
+ */
+
+#define IS_CAN_MODE(MODE) (((MODE) == CAN_MODE_NORMAL) || \
+ ((MODE) == CAN_MODE_LOOPBACK)|| \
+ ((MODE) == CAN_MODE_SILENT) || \
+ ((MODE) == CAN_MODE_SILENT_LOOPBACK))
+#define IS_CAN_SJW(SJW) (((SJW) == CAN_SJW_1TQ) || ((SJW) == CAN_SJW_2TQ) || \
+ ((SJW) == CAN_SJW_3TQ) || ((SJW) == CAN_SJW_4TQ))
+#define IS_CAN_BS1(BS1) (((BS1) == CAN_BS1_1TQ) || ((BS1) == CAN_BS1_2TQ) || \
+ ((BS1) == CAN_BS1_3TQ) || ((BS1) == CAN_BS1_4TQ) || \
+ ((BS1) == CAN_BS1_5TQ) || ((BS1) == CAN_BS1_6TQ) || \
+ ((BS1) == CAN_BS1_7TQ) || ((BS1) == CAN_BS1_8TQ) || \
+ ((BS1) == CAN_BS1_9TQ) || ((BS1) == CAN_BS1_10TQ)|| \
+ ((BS1) == CAN_BS1_11TQ)|| ((BS1) == CAN_BS1_12TQ)|| \
+ ((BS1) == CAN_BS1_13TQ)|| ((BS1) == CAN_BS1_14TQ)|| \
+ ((BS1) == CAN_BS1_15TQ)|| ((BS1) == CAN_BS1_16TQ))
+#define IS_CAN_BS2(BS2) (((BS2) == CAN_BS2_1TQ) || ((BS2) == CAN_BS2_2TQ) || \
+ ((BS2) == CAN_BS2_3TQ) || ((BS2) == CAN_BS2_4TQ) || \
+ ((BS2) == CAN_BS2_5TQ) || ((BS2) == CAN_BS2_6TQ) || \
+ ((BS2) == CAN_BS2_7TQ) || ((BS2) == CAN_BS2_8TQ))
+#define IS_CAN_PRESCALER(PRESCALER) (((PRESCALER) >= 1U) && ((PRESCALER) <= 1024U))
+#define IS_CAN_FILTER_ID_HALFWORD(HALFWORD) ((HALFWORD) <= 0xFFFFU)
+#define IS_CAN_FILTER_BANK_SINGLE(BANK) ((BANK) <= 13U)
+#define IS_CAN_FILTER_MODE(MODE) (((MODE) == CAN_FILTERMODE_IDMASK) || \
+ ((MODE) == CAN_FILTERMODE_IDLIST))
+#define IS_CAN_FILTER_SCALE(SCALE) (((SCALE) == CAN_FILTERSCALE_16BIT) || \
+ ((SCALE) == CAN_FILTERSCALE_32BIT))
+#define IS_CAN_FILTER_ACTIVATION(ACTIVATION) (((ACTIVATION) == CAN_FILTER_DISABLE) || \
+ ((ACTIVATION) == CAN_FILTER_ENABLE))
+#define IS_CAN_FILTER_FIFO(FIFO) (((FIFO) == CAN_FILTER_FIFO0) || \
+ ((FIFO) == CAN_FILTER_FIFO1))
+#define IS_CAN_TX_MAILBOX(TRANSMITMAILBOX) (((TRANSMITMAILBOX) == CAN_TX_MAILBOX0 ) || \
+ ((TRANSMITMAILBOX) == CAN_TX_MAILBOX1 ) || \
+ ((TRANSMITMAILBOX) == CAN_TX_MAILBOX2 ))
+#define IS_CAN_TX_MAILBOX_LIST(TRANSMITMAILBOX) ((TRANSMITMAILBOX) <= (CAN_TX_MAILBOX0 | CAN_TX_MAILBOX1 | CAN_TX_MAILBOX2))
+#define IS_CAN_STDID(STDID) ((STDID) <= 0x7FFU)
+#define IS_CAN_EXTID(EXTID) ((EXTID) <= 0x1FFFFFFFU)
+#define IS_CAN_DLC(DLC) ((DLC) <= 8U)
+#define IS_CAN_IDTYPE(IDTYPE) (((IDTYPE) == CAN_ID_STD) || \
+ ((IDTYPE) == CAN_ID_EXT))
+#define IS_CAN_RTR(RTR) (((RTR) == CAN_RTR_DATA) || ((RTR) == CAN_RTR_REMOTE))
+#define IS_CAN_RX_FIFO(FIFO) (((FIFO) == CAN_RX_FIFO0) || ((FIFO) == CAN_RX_FIFO1))
+#define IS_CAN_IT(IT) ((IT) <= (CAN_IT_TX_MAILBOX_EMPTY | CAN_IT_RX_FIFO0_MSG_PENDING | \
+ CAN_IT_RX_FIFO0_FULL | CAN_IT_RX_FIFO0_OVERRUN | \
+ CAN_IT_RX_FIFO1_MSG_PENDING | CAN_IT_RX_FIFO1_FULL | \
+ CAN_IT_RX_FIFO1_OVERRUN | CAN_IT_WAKEUP | \
+ CAN_IT_SLEEP_ACK | CAN_IT_ERROR_WARNING | \
+ CAN_IT_ERROR_PASSIVE | CAN_IT_BUSOFF | \
+ CAN_IT_LAST_ERROR_CODE | CAN_IT_ERROR))
+
+/**
+ * @}
+ */
+/* End of private macros -----------------------------------------------------*/
+
+/**
+ * @}
+ */
+
+
+#endif /* CAN */
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32F0xx_HAL_CAN_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cec.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cec.h
new file mode 100644
index 0000000..8e8cdb6
--- /dev/null
+++ b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cec.h
@@ -0,0 +1,794 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_cec.h
+ * @author MCD Application Team
+ * @brief Header file of CEC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32F0xx_HAL_CEC_H
+#define STM32F0xx_HAL_CEC_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+#if defined (CEC)
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup CEC
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup CEC_Exported_Types CEC Exported Types
+ * @{
+ */
+
+/**
+ * @brief CEC Init Structure definition
+ */
+typedef struct
+{
+ uint32_t SignalFreeTime; /*!< Set SFT field, specifies the Signal Free Time.
+ It can be one of @ref CEC_Signal_Free_Time
+ and belongs to the set {0,...,7} where
+ 0x0 is the default configuration
+ else means 0.5 + (SignalFreeTime - 1) nominal data bit periods */
+
+ uint32_t Tolerance; /*!< Set RXTOL bit, specifies the tolerance accepted on the received waveforms,
+ it can be a value of @ref CEC_Tolerance : it is either CEC_STANDARD_TOLERANCE
+ or CEC_EXTENDED_TOLERANCE */
+
+ uint32_t BRERxStop; /*!< Set BRESTP bit @ref CEC_BRERxStop : specifies whether or not a Bit Rising Error stops the reception.
+ CEC_NO_RX_STOP_ON_BRE: reception is not stopped.
+ CEC_RX_STOP_ON_BRE: reception is stopped. */
+
+ uint32_t BREErrorBitGen; /*!< Set BREGEN bit @ref CEC_BREErrorBitGen : specifies whether or not an Error-Bit is generated on the
+ CEC line upon Bit Rising Error detection.
+ CEC_BRE_ERRORBIT_NO_GENERATION: no error-bit generation.
+ CEC_BRE_ERRORBIT_GENERATION: error-bit generation if BRESTP is set. */
+
+ uint32_t LBPEErrorBitGen; /*!< Set LBPEGEN bit @ref CEC_LBPEErrorBitGen : specifies whether or not an Error-Bit is generated on the
+ CEC line upon Long Bit Period Error detection.
+ CEC_LBPE_ERRORBIT_NO_GENERATION: no error-bit generation.
+ CEC_LBPE_ERRORBIT_GENERATION: error-bit generation. */
+
+ uint32_t BroadcastMsgNoErrorBitGen; /*!< Set BRDNOGEN bit @ref CEC_BroadCastMsgErrorBitGen : allows to avoid an Error-Bit generation on the CEC line
+ upon an error detected on a broadcast message.
+
+ It supersedes BREGEN and LBPEGEN bits for a broadcast message error handling. It can take two values:
+
+ 1) CEC_BROADCASTERROR_ERRORBIT_GENERATION.
+ a) BRE detection: error-bit generation on the CEC line if BRESTP=CEC_RX_STOP_ON_BRE
+ and BREGEN=CEC_BRE_ERRORBIT_NO_GENERATION.
+ b) LBPE detection: error-bit generation on the CEC line
+ if LBPGEN=CEC_LBPE_ERRORBIT_NO_GENERATION.
+
+ 2) CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION.
+ no error-bit generation in case neither a) nor b) are satisfied. Additionally,
+ there is no error-bit generation in case of Short Bit Period Error detection in
+ a broadcast message while LSTN bit is set. */
+
+ uint32_t SignalFreeTimeOption; /*!< Set SFTOP bit @ref CEC_SFT_Option : specifies when SFT timer starts.
+ CEC_SFT_START_ON_TXSOM SFT: timer starts when TXSOM is set by software.
+ CEC_SFT_START_ON_TX_RX_END: SFT timer starts automatically at the end of message transmission/reception. */
+
+ uint32_t ListenMode; /*!< Set LSTN bit @ref CEC_Listening_Mode : specifies device listening mode. It can take two values:
+
+ CEC_REDUCED_LISTENING_MODE: CEC peripheral receives only message addressed to its
+ own address (OAR). Messages addressed to different destination are ignored.
+ Broadcast messages are always received.
+
+ CEC_FULL_LISTENING_MODE: CEC peripheral receives messages addressed to its own
+ address (OAR) with positive acknowledge. Messages addressed to different destination
+ are received, but without interfering with the CEC bus: no acknowledge sent. */
+
+ uint16_t OwnAddress; /*!< Own addresses configuration
+ This parameter can be a value of @ref CEC_OWN_ADDRESS */
+
+ uint8_t *RxBuffer; /*!< CEC Rx buffer pointeur */
+
+
+} CEC_InitTypeDef;
+
+/**
+ * @brief HAL CEC State definition
+ * @note HAL CEC State value is a combination of 2 different substates: gState and RxState (see @ref CEC_State_Definition).
+ * - gState contains CEC state information related to global Handle management
+ * and also information related to Tx operations.
+ * gState value coding follow below described bitmap :
+ * b7 (not used)
+ * x : Should be set to 0
+ * b6 Error information
+ * 0 : No Error
+ * 1 : Error
+ * b5 IP initilisation status
+ * 0 : Reset (IP not initialized)
+ * 1 : Init done (IP initialized. HAL CEC Init function already called)
+ * b4-b3 (not used)
+ * xx : Should be set to 00
+ * b2 Intrinsic process state
+ * 0 : Ready
+ * 1 : Busy (IP busy with some configuration or internal operations)
+ * b1 (not used)
+ * x : Should be set to 0
+ * b0 Tx state
+ * 0 : Ready (no Tx operation ongoing)
+ * 1 : Busy (Tx operation ongoing)
+ * - RxState contains information related to Rx operations.
+ * RxState value coding follow below described bitmap :
+ * b7-b6 (not used)
+ * xx : Should be set to 00
+ * b5 IP initilisation status
+ * 0 : Reset (IP not initialized)
+ * 1 : Init done (IP initialized)
+ * b4-b2 (not used)
+ * xxx : Should be set to 000
+ * b1 Rx state
+ * 0 : Ready (no Rx operation ongoing)
+ * 1 : Busy (Rx operation ongoing)
+ * b0 (not used)
+ * x : Should be set to 0.
+ */
+typedef uint32_t HAL_CEC_StateTypeDef;
+
+/**
+ * @brief CEC handle Structure definition
+ */
+#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1)
+typedef struct __CEC_HandleTypeDef
+#else
+typedef struct
+#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */
+{
+ CEC_TypeDef *Instance; /*!< CEC registers base address */
+
+ CEC_InitTypeDef Init; /*!< CEC communication parameters */
+
+ uint8_t *pTxBuffPtr; /*!< Pointer to CEC Tx transfer Buffer */
+
+ uint16_t TxXferCount; /*!< CEC Tx Transfer Counter */
+
+ uint16_t RxXferSize; /*!< CEC Rx Transfer size, 0: header received only */
+
+ HAL_LockTypeDef Lock; /*!< Locking object */
+
+ HAL_CEC_StateTypeDef gState; /*!< CEC state information related to global Handle management
+ and also related to Tx operations.
+ This parameter can be a value of @ref HAL_CEC_StateTypeDef */
+
+ HAL_CEC_StateTypeDef RxState; /*!< CEC state information related to Rx operations.
+ This parameter can be a value of @ref HAL_CEC_StateTypeDef */
+
+ uint32_t ErrorCode; /*!< For errors handling purposes, copy of ISR register
+ in case error is reported */
+
+#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1)
+ void (* TxCpltCallback)(struct __CEC_HandleTypeDef
+ *hcec); /*!< CEC Tx Transfer completed callback */
+ void (* RxCpltCallback)(struct __CEC_HandleTypeDef *hcec,
+ uint32_t RxFrameSize); /*!< CEC Rx Transfer completed callback */
+ void (* ErrorCallback)(struct __CEC_HandleTypeDef *hcec); /*!< CEC error callback */
+
+ void (* MspInitCallback)(struct __CEC_HandleTypeDef *hcec); /*!< CEC Msp Init callback */
+ void (* MspDeInitCallback)(struct __CEC_HandleTypeDef *hcec); /*!< CEC Msp DeInit callback */
+
+#endif /* (USE_HAL_CEC_REGISTER_CALLBACKS) */
+} CEC_HandleTypeDef;
+
+#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1)
+/**
+ * @brief HAL CEC Callback ID enumeration definition
+ */
+typedef enum
+{
+ HAL_CEC_TX_CPLT_CB_ID = 0x00U, /*!< CEC Tx Transfer completed callback ID */
+ HAL_CEC_RX_CPLT_CB_ID = 0x01U, /*!< CEC Rx Transfer completed callback ID */
+ HAL_CEC_ERROR_CB_ID = 0x02U, /*!< CEC error callback ID */
+ HAL_CEC_MSPINIT_CB_ID = 0x03U, /*!< CEC Msp Init callback ID */
+ HAL_CEC_MSPDEINIT_CB_ID = 0x04U /*!< CEC Msp DeInit callback ID */
+} HAL_CEC_CallbackIDTypeDef;
+
+/**
+ * @brief HAL CEC Callback pointer definition
+ */
+typedef void (*pCEC_CallbackTypeDef)(CEC_HandleTypeDef *hcec); /*!< pointer to an CEC callback function */
+typedef void (*pCEC_RxCallbackTypeDef)(CEC_HandleTypeDef *hcec,
+ uint32_t RxFrameSize); /*!< pointer to an Rx Transfer completed callback function */
+#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup CEC_Exported_Constants CEC Exported Constants
+ * @{
+ */
+/** @defgroup CEC_State_Definition CEC State Code Definition
+ * @{
+ */
+#define HAL_CEC_STATE_RESET ((uint32_t)0x00000000) /*!< Peripheral is not yet Initialized
+ Value is allowed for gState and RxState */
+#define HAL_CEC_STATE_READY ((uint32_t)0x00000020) /*!< Peripheral Initialized and ready for use
+ Value is allowed for gState and RxState */
+#define HAL_CEC_STATE_BUSY ((uint32_t)0x00000024) /*!< an internal process is ongoing
+ Value is allowed for gState only */
+#define HAL_CEC_STATE_BUSY_RX ((uint32_t)0x00000022) /*!< Data Reception process is ongoing
+ Value is allowed for RxState only */
+#define HAL_CEC_STATE_BUSY_TX ((uint32_t)0x00000021) /*!< Data Transmission process is ongoing
+ Value is allowed for gState only */
+#define HAL_CEC_STATE_BUSY_RX_TX ((uint32_t)0x00000023) /*!< an internal process is ongoing
+ Value is allowed for gState only */
+#define HAL_CEC_STATE_ERROR ((uint32_t)0x00000050) /*!< Error Value is allowed for gState only */
+/**
+ * @}
+ */
+/** @defgroup CEC_Error_Code CEC Error Code
+ * @{
+ */
+#define HAL_CEC_ERROR_NONE (uint32_t) 0x0000U /*!< no error */
+#define HAL_CEC_ERROR_RXOVR CEC_ISR_RXOVR /*!< CEC Rx-Overrun */
+#define HAL_CEC_ERROR_BRE CEC_ISR_BRE /*!< CEC Rx Bit Rising Error */
+#define HAL_CEC_ERROR_SBPE CEC_ISR_SBPE /*!< CEC Rx Short Bit period Error */
+#define HAL_CEC_ERROR_LBPE CEC_ISR_LBPE /*!< CEC Rx Long Bit period Error */
+#define HAL_CEC_ERROR_RXACKE CEC_ISR_RXACKE /*!< CEC Rx Missing Acknowledge */
+#define HAL_CEC_ERROR_ARBLST CEC_ISR_ARBLST /*!< CEC Arbitration Lost */
+#define HAL_CEC_ERROR_TXUDR CEC_ISR_TXUDR /*!< CEC Tx-Buffer Underrun */
+#define HAL_CEC_ERROR_TXERR CEC_ISR_TXERR /*!< CEC Tx-Error */
+#define HAL_CEC_ERROR_TXACKE CEC_ISR_TXACKE /*!< CEC Tx Missing Acknowledge */
+#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1)
+#define HAL_CEC_ERROR_INVALID_CALLBACK ((uint32_t)0x00002000U) /*!< Invalid Callback Error */
+#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */
+/**
+ * @}
+ */
+
+/** @defgroup CEC_Signal_Free_Time CEC Signal Free Time setting parameter
+ * @{
+ */
+#define CEC_DEFAULT_SFT ((uint32_t)0x00000000U)
+#define CEC_0_5_BITPERIOD_SFT ((uint32_t)0x00000001U)
+#define CEC_1_5_BITPERIOD_SFT ((uint32_t)0x00000002U)
+#define CEC_2_5_BITPERIOD_SFT ((uint32_t)0x00000003U)
+#define CEC_3_5_BITPERIOD_SFT ((uint32_t)0x00000004U)
+#define CEC_4_5_BITPERIOD_SFT ((uint32_t)0x00000005U)
+#define CEC_5_5_BITPERIOD_SFT ((uint32_t)0x00000006U)
+#define CEC_6_5_BITPERIOD_SFT ((uint32_t)0x00000007U)
+/**
+ * @}
+ */
+
+/** @defgroup CEC_Tolerance CEC Receiver Tolerance
+ * @{
+ */
+#define CEC_STANDARD_TOLERANCE ((uint32_t)0x00000000U)
+#define CEC_EXTENDED_TOLERANCE ((uint32_t)CEC_CFGR_RXTOL)
+/**
+ * @}
+ */
+
+/** @defgroup CEC_BRERxStop CEC Reception Stop on Error
+ * @{
+ */
+#define CEC_NO_RX_STOP_ON_BRE ((uint32_t)0x00000000U)
+#define CEC_RX_STOP_ON_BRE ((uint32_t)CEC_CFGR_BRESTP)
+/**
+ * @}
+ */
+
+/** @defgroup CEC_BREErrorBitGen CEC Error Bit Generation if Bit Rise Error reported
+ * @{
+ */
+#define CEC_BRE_ERRORBIT_NO_GENERATION ((uint32_t)0x00000000U)
+#define CEC_BRE_ERRORBIT_GENERATION ((uint32_t)CEC_CFGR_BREGEN)
+/**
+ * @}
+ */
+
+/** @defgroup CEC_LBPEErrorBitGen CEC Error Bit Generation if Long Bit Period Error reported
+ * @{
+ */
+#define CEC_LBPE_ERRORBIT_NO_GENERATION ((uint32_t)0x00000000U)
+#define CEC_LBPE_ERRORBIT_GENERATION ((uint32_t)CEC_CFGR_LBPEGEN)
+/**
+ * @}
+ */
+
+/** @defgroup CEC_BroadCastMsgErrorBitGen CEC Error Bit Generation on Broadcast message
+ * @{
+ */
+#define CEC_BROADCASTERROR_ERRORBIT_GENERATION ((uint32_t)0x00000000U)
+#define CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION ((uint32_t)CEC_CFGR_BRDNOGEN)
+/**
+ * @}
+ */
+
+/** @defgroup CEC_SFT_Option CEC Signal Free Time start option
+ * @{
+ */
+#define CEC_SFT_START_ON_TXSOM ((uint32_t)0x00000000U)
+#define CEC_SFT_START_ON_TX_RX_END ((uint32_t)CEC_CFGR_SFTOPT)
+/**
+ * @}
+ */
+
+/** @defgroup CEC_Listening_Mode CEC Listening mode option
+ * @{
+ */
+#define CEC_REDUCED_LISTENING_MODE ((uint32_t)0x00000000U)
+#define CEC_FULL_LISTENING_MODE ((uint32_t)CEC_CFGR_LSTN)
+/**
+ * @}
+ */
+
+/** @defgroup CEC_OAR_Position CEC Device Own Address position in CEC CFGR register
+ * @{
+ */
+#define CEC_CFGR_OAR_LSB_POS ((uint32_t) 16U)
+/**
+ * @}
+ */
+
+/** @defgroup CEC_Initiator_Position CEC Initiator logical address position in message header
+ * @{
+ */
+#define CEC_INITIATOR_LSB_POS ((uint32_t) 4U)
+/**
+ * @}
+ */
+
+/** @defgroup CEC_OWN_ADDRESS CEC Own Address
+ * @{
+ */
+#define CEC_OWN_ADDRESS_NONE ((uint16_t) 0x0000U) /* Reset value */
+#define CEC_OWN_ADDRESS_0 ((uint16_t) 0x0001U) /* Logical Address 0 */
+#define CEC_OWN_ADDRESS_1 ((uint16_t) 0x0002U) /* Logical Address 1 */
+#define CEC_OWN_ADDRESS_2 ((uint16_t) 0x0004U) /* Logical Address 2 */
+#define CEC_OWN_ADDRESS_3 ((uint16_t) 0x0008U) /* Logical Address 3 */
+#define CEC_OWN_ADDRESS_4 ((uint16_t) 0x0010U) /* Logical Address 4 */
+#define CEC_OWN_ADDRESS_5 ((uint16_t) 0x0020U) /* Logical Address 5 */
+#define CEC_OWN_ADDRESS_6 ((uint16_t) 0x0040U) /* Logical Address 6 */
+#define CEC_OWN_ADDRESS_7 ((uint16_t) 0x0080U) /* Logical Address 7 */
+#define CEC_OWN_ADDRESS_8 ((uint16_t) 0x0100U) /* Logical Address 9 */
+#define CEC_OWN_ADDRESS_9 ((uint16_t) 0x0200U) /* Logical Address 10 */
+#define CEC_OWN_ADDRESS_10 ((uint16_t) 0x0400U) /* Logical Address 11 */
+#define CEC_OWN_ADDRESS_11 ((uint16_t) 0x0800U) /* Logical Address 12 */
+#define CEC_OWN_ADDRESS_12 ((uint16_t) 0x1000U) /* Logical Address 13 */
+#define CEC_OWN_ADDRESS_13 ((uint16_t) 0x2000U) /* Logical Address 14 */
+#define CEC_OWN_ADDRESS_14 ((uint16_t) 0x4000U) /* Logical Address 15 */
+/**
+ * @}
+ */
+
+/** @defgroup CEC_Interrupts_Definitions CEC Interrupts definition
+ * @{
+ */
+#define CEC_IT_TXACKE CEC_IER_TXACKEIE
+#define CEC_IT_TXERR CEC_IER_TXERRIE
+#define CEC_IT_TXUDR CEC_IER_TXUDRIE
+#define CEC_IT_TXEND CEC_IER_TXENDIE
+#define CEC_IT_TXBR CEC_IER_TXBRIE
+#define CEC_IT_ARBLST CEC_IER_ARBLSTIE
+#define CEC_IT_RXACKE CEC_IER_RXACKEIE
+#define CEC_IT_LBPE CEC_IER_LBPEIE
+#define CEC_IT_SBPE CEC_IER_SBPEIE
+#define CEC_IT_BRE CEC_IER_BREIE
+#define CEC_IT_RXOVR CEC_IER_RXOVRIE
+#define CEC_IT_RXEND CEC_IER_RXENDIE
+#define CEC_IT_RXBR CEC_IER_RXBRIE
+/**
+ * @}
+ */
+
+/** @defgroup CEC_Flags_Definitions CEC Flags definition
+ * @{
+ */
+#define CEC_FLAG_TXACKE CEC_ISR_TXACKE
+#define CEC_FLAG_TXERR CEC_ISR_TXERR
+#define CEC_FLAG_TXUDR CEC_ISR_TXUDR
+#define CEC_FLAG_TXEND CEC_ISR_TXEND
+#define CEC_FLAG_TXBR CEC_ISR_TXBR
+#define CEC_FLAG_ARBLST CEC_ISR_ARBLST
+#define CEC_FLAG_RXACKE CEC_ISR_RXACKE
+#define CEC_FLAG_LBPE CEC_ISR_LBPE
+#define CEC_FLAG_SBPE CEC_ISR_SBPE
+#define CEC_FLAG_BRE CEC_ISR_BRE
+#define CEC_FLAG_RXOVR CEC_ISR_RXOVR
+#define CEC_FLAG_RXEND CEC_ISR_RXEND
+#define CEC_FLAG_RXBR CEC_ISR_RXBR
+/**
+ * @}
+ */
+
+/** @defgroup CEC_ALL_ERROR CEC all RX or TX errors flags
+ * @{
+ */
+#define CEC_ISR_ALL_ERROR ((uint32_t)CEC_ISR_RXOVR|CEC_ISR_BRE|CEC_ISR_SBPE|CEC_ISR_LBPE|CEC_ISR_RXACKE|\
+ CEC_ISR_ARBLST|CEC_ISR_TXUDR|CEC_ISR_TXERR|CEC_ISR_TXACKE)
+/**
+ * @}
+ */
+
+/** @defgroup CEC_IER_ALL_RX CEC all RX errors interrupts enabling flag
+ * @{
+ */
+#define CEC_IER_RX_ALL_ERR ((uint32_t)CEC_IER_RXACKEIE|CEC_IER_LBPEIE|CEC_IER_SBPEIE|CEC_IER_BREIE|CEC_IER_RXOVRIE)
+/**
+ * @}
+ */
+
+/** @defgroup CEC_IER_ALL_TX CEC all TX errors interrupts enabling flag
+ * @{
+ */
+#define CEC_IER_TX_ALL_ERR ((uint32_t)CEC_IER_TXACKEIE|CEC_IER_TXERRIE|CEC_IER_TXUDRIE|CEC_IER_ARBLSTIE)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup CEC_Exported_Macros CEC Exported Macros
+ * @{
+ */
+
+/** @brief Reset CEC handle gstate & RxState
+ * @param __HANDLE__ CEC handle.
+ * @retval None
+ */
+#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1)
+#define __HAL_CEC_RESET_HANDLE_STATE(__HANDLE__) do{ \
+ (__HANDLE__)->gState = HAL_CEC_STATE_RESET; \
+ (__HANDLE__)->RxState = HAL_CEC_STATE_RESET; \
+ (__HANDLE__)->MspInitCallback = NULL; \
+ (__HANDLE__)->MspDeInitCallback = NULL; \
+ } while(0)
+#else
+#define __HAL_CEC_RESET_HANDLE_STATE(__HANDLE__) do{ \
+ (__HANDLE__)->gState = HAL_CEC_STATE_RESET; \
+ (__HANDLE__)->RxState = HAL_CEC_STATE_RESET; \
+ } while(0)
+#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */
+/** @brief Checks whether or not the specified CEC interrupt flag is set.
+ * @param __HANDLE__ specifies the CEC Handle.
+ * @param __FLAG__ specifies the flag to check.
+ * @arg CEC_FLAG_TXACKE: Tx Missing acknowledge Error
+ * @arg CEC_FLAG_TXERR: Tx Error.
+ * @arg CEC_FLAG_TXUDR: Tx-Buffer Underrun.
+ * @arg CEC_FLAG_TXEND: End of transmission (successful transmission of the last byte).
+ * @arg CEC_FLAG_TXBR: Tx-Byte Request.
+ * @arg CEC_FLAG_ARBLST: Arbitration Lost
+ * @arg CEC_FLAG_RXACKE: Rx-Missing Acknowledge
+ * @arg CEC_FLAG_LBPE: Rx Long period Error
+ * @arg CEC_FLAG_SBPE: Rx Short period Error
+ * @arg CEC_FLAG_BRE: Rx Bit Rising Error
+ * @arg CEC_FLAG_RXOVR: Rx Overrun.
+ * @arg CEC_FLAG_RXEND: End Of Reception.
+ * @arg CEC_FLAG_RXBR: Rx-Byte Received.
+ * @retval ITStatus
+ */
+#define __HAL_CEC_GET_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR & (__FLAG__))
+
+/** @brief Clears the interrupt or status flag when raised (write at 1)
+ * @param __HANDLE__ specifies the CEC Handle.
+ * @param __FLAG__ specifies the interrupt/status flag to clear.
+ * This parameter can be one of the following values:
+ * @arg CEC_FLAG_TXACKE: Tx Missing acknowledge Error
+ * @arg CEC_FLAG_TXERR: Tx Error.
+ * @arg CEC_FLAG_TXUDR: Tx-Buffer Underrun.
+ * @arg CEC_FLAG_TXEND: End of transmission (successful transmission of the last byte).
+ * @arg CEC_FLAG_TXBR: Tx-Byte Request.
+ * @arg CEC_FLAG_ARBLST: Arbitration Lost
+ * @arg CEC_FLAG_RXACKE: Rx-Missing Acknowledge
+ * @arg CEC_FLAG_LBPE: Rx Long period Error
+ * @arg CEC_FLAG_SBPE: Rx Short period Error
+ * @arg CEC_FLAG_BRE: Rx Bit Rising Error
+ * @arg CEC_FLAG_RXOVR: Rx Overrun.
+ * @arg CEC_FLAG_RXEND: End Of Reception.
+ * @arg CEC_FLAG_RXBR: Rx-Byte Received.
+ * @retval none
+ */
+#define __HAL_CEC_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR |= (__FLAG__))
+
+/** @brief Enables the specified CEC interrupt.
+ * @param __HANDLE__ specifies the CEC Handle.
+ * @param __INTERRUPT__ specifies the CEC interrupt to enable.
+ * This parameter can be one of the following values:
+ * @arg CEC_IT_TXACKE: Tx Missing acknowledge Error IT Enable
+ * @arg CEC_IT_TXERR: Tx Error IT Enable
+ * @arg CEC_IT_TXUDR: Tx-Buffer Underrun IT Enable
+ * @arg CEC_IT_TXEND: End of transmission IT Enable
+ * @arg CEC_IT_TXBR: Tx-Byte Request IT Enable
+ * @arg CEC_IT_ARBLST: Arbitration Lost IT Enable
+ * @arg CEC_IT_RXACKE: Rx-Missing Acknowledge IT Enable
+ * @arg CEC_IT_LBPE: Rx Long period Error IT Enable
+ * @arg CEC_IT_SBPE: Rx Short period Error IT Enable
+ * @arg CEC_IT_BRE: Rx Bit Rising Error IT Enable
+ * @arg CEC_IT_RXOVR: Rx Overrun IT Enable
+ * @arg CEC_IT_RXEND: End Of Reception IT Enable
+ * @arg CEC_IT_RXBR: Rx-Byte Received IT Enable
+ * @retval none
+ */
+#define __HAL_CEC_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER |= (__INTERRUPT__))
+
+/** @brief Disables the specified CEC interrupt.
+ * @param __HANDLE__ specifies the CEC Handle.
+ * @param __INTERRUPT__ specifies the CEC interrupt to disable.
+ * This parameter can be one of the following values:
+ * @arg CEC_IT_TXACKE: Tx Missing acknowledge Error IT Enable
+ * @arg CEC_IT_TXERR: Tx Error IT Enable
+ * @arg CEC_IT_TXUDR: Tx-Buffer Underrun IT Enable
+ * @arg CEC_IT_TXEND: End of transmission IT Enable
+ * @arg CEC_IT_TXBR: Tx-Byte Request IT Enable
+ * @arg CEC_IT_ARBLST: Arbitration Lost IT Enable
+ * @arg CEC_IT_RXACKE: Rx-Missing Acknowledge IT Enable
+ * @arg CEC_IT_LBPE: Rx Long period Error IT Enable
+ * @arg CEC_IT_SBPE: Rx Short period Error IT Enable
+ * @arg CEC_IT_BRE: Rx Bit Rising Error IT Enable
+ * @arg CEC_IT_RXOVR: Rx Overrun IT Enable
+ * @arg CEC_IT_RXEND: End Of Reception IT Enable
+ * @arg CEC_IT_RXBR: Rx-Byte Received IT Enable
+ * @retval none
+ */
+#define __HAL_CEC_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER &= (~(__INTERRUPT__)))
+
+/** @brief Checks whether or not the specified CEC interrupt is enabled.
+ * @param __HANDLE__ specifies the CEC Handle.
+ * @param __INTERRUPT__ specifies the CEC interrupt to check.
+ * This parameter can be one of the following values:
+ * @arg CEC_IT_TXACKE: Tx Missing acknowledge Error IT Enable
+ * @arg CEC_IT_TXERR: Tx Error IT Enable
+ * @arg CEC_IT_TXUDR: Tx-Buffer Underrun IT Enable
+ * @arg CEC_IT_TXEND: End of transmission IT Enable
+ * @arg CEC_IT_TXBR: Tx-Byte Request IT Enable
+ * @arg CEC_IT_ARBLST: Arbitration Lost IT Enable
+ * @arg CEC_IT_RXACKE: Rx-Missing Acknowledge IT Enable
+ * @arg CEC_IT_LBPE: Rx Long period Error IT Enable
+ * @arg CEC_IT_SBPE: Rx Short period Error IT Enable
+ * @arg CEC_IT_BRE: Rx Bit Rising Error IT Enable
+ * @arg CEC_IT_RXOVR: Rx Overrun IT Enable
+ * @arg CEC_IT_RXEND: End Of Reception IT Enable
+ * @arg CEC_IT_RXBR: Rx-Byte Received IT Enable
+ * @retval FlagStatus
+ */
+#define __HAL_CEC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER & (__INTERRUPT__))
+
+/** @brief Enables the CEC device
+ * @param __HANDLE__ specifies the CEC Handle.
+ * @retval none
+ */
+#define __HAL_CEC_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= CEC_CR_CECEN)
+
+/** @brief Disables the CEC device
+ * @param __HANDLE__ specifies the CEC Handle.
+ * @retval none
+ */
+#define __HAL_CEC_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~CEC_CR_CECEN)
+
+/** @brief Set Transmission Start flag
+ * @param __HANDLE__ specifies the CEC Handle.
+ * @retval none
+ */
+#define __HAL_CEC_FIRST_BYTE_TX_SET(__HANDLE__) ((__HANDLE__)->Instance->CR |= CEC_CR_TXSOM)
+
+/** @brief Set Transmission End flag
+ * @param __HANDLE__ specifies the CEC Handle.
+ * @retval none
+ * If the CEC message consists of only one byte, TXEOM must be set before of TXSOM.
+ */
+#define __HAL_CEC_LAST_BYTE_TX_SET(__HANDLE__) ((__HANDLE__)->Instance->CR |= CEC_CR_TXEOM)
+
+/** @brief Get Transmission Start flag
+ * @param __HANDLE__ specifies the CEC Handle.
+ * @retval FlagStatus
+ */
+#define __HAL_CEC_GET_TRANSMISSION_START_FLAG(__HANDLE__) ((__HANDLE__)->Instance->CR & CEC_CR_TXSOM)
+
+/** @brief Get Transmission End flag
+ * @param __HANDLE__ specifies the CEC Handle.
+ * @retval FlagStatus
+ */
+#define __HAL_CEC_GET_TRANSMISSION_END_FLAG(__HANDLE__) ((__HANDLE__)->Instance->CR & CEC_CR_TXEOM)
+
+/** @brief Clear OAR register
+ * @param __HANDLE__ specifies the CEC Handle.
+ * @retval none
+ */
+#define __HAL_CEC_CLEAR_OAR(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CFGR, CEC_CFGR_OAR)
+
+/** @brief Set OAR register (without resetting previously set address in case of multi-address mode)
+ * To reset OAR, __HAL_CEC_CLEAR_OAR() needs to be called beforehand
+ * @param __HANDLE__ specifies the CEC Handle.
+ * @param __ADDRESS__ Own Address value (CEC logical address is identified by bit position)
+ * @retval none
+ */
+#define __HAL_CEC_SET_OAR(__HANDLE__,__ADDRESS__) SET_BIT((__HANDLE__)->Instance->CFGR, (__ADDRESS__)<< CEC_CFGR_OAR_LSB_POS)
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup CEC_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup CEC_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization and de-initialization functions ****************************/
+HAL_StatusTypeDef HAL_CEC_Init(CEC_HandleTypeDef *hcec);
+HAL_StatusTypeDef HAL_CEC_DeInit(CEC_HandleTypeDef *hcec);
+HAL_StatusTypeDef HAL_CEC_SetDeviceAddress(CEC_HandleTypeDef *hcec, uint16_t CEC_OwnAddress);
+void HAL_CEC_MspInit(CEC_HandleTypeDef *hcec);
+void HAL_CEC_MspDeInit(CEC_HandleTypeDef *hcec);
+
+#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1)
+HAL_StatusTypeDef HAL_CEC_RegisterCallback(CEC_HandleTypeDef *hcec, HAL_CEC_CallbackIDTypeDef CallbackID,
+ pCEC_CallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_CEC_UnRegisterCallback(CEC_HandleTypeDef *hcec, HAL_CEC_CallbackIDTypeDef CallbackID);
+
+HAL_StatusTypeDef HAL_CEC_RegisterRxCpltCallback(CEC_HandleTypeDef *hcec, pCEC_RxCallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_CEC_UnRegisterRxCpltCallback(CEC_HandleTypeDef *hcec);
+#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */
+/**
+ * @}
+ */
+
+/** @addtogroup CEC_Exported_Functions_Group2
+ * @{
+ */
+/* I/O operation functions ***************************************************/
+HAL_StatusTypeDef HAL_CEC_Transmit_IT(CEC_HandleTypeDef *hcec, uint8_t InitiatorAddress, uint8_t DestinationAddress,
+ uint8_t *pData, uint32_t Size);
+uint32_t HAL_CEC_GetLastReceivedFrameSize(CEC_HandleTypeDef *hcec);
+void HAL_CEC_ChangeRxBuffer(CEC_HandleTypeDef *hcec, uint8_t *Rxbuffer);
+void HAL_CEC_IRQHandler(CEC_HandleTypeDef *hcec);
+void HAL_CEC_TxCpltCallback(CEC_HandleTypeDef *hcec);
+void HAL_CEC_RxCpltCallback(CEC_HandleTypeDef *hcec, uint32_t RxFrameSize);
+void HAL_CEC_ErrorCallback(CEC_HandleTypeDef *hcec);
+/**
+ * @}
+ */
+
+/** @addtogroup CEC_Exported_Functions_Group3
+ * @{
+ */
+/* Peripheral State functions ************************************************/
+HAL_CEC_StateTypeDef HAL_CEC_GetState(CEC_HandleTypeDef *hcec);
+uint32_t HAL_CEC_GetError(CEC_HandleTypeDef *hcec);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/** @defgroup CEC_Private_Types CEC Private Types
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup CEC_Private_Variables CEC Private Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup CEC_Private_Constants CEC Private Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup CEC_Private_Macros CEC Private Macros
+ * @{
+ */
+
+#define IS_CEC_SIGNALFREETIME(__SFT__) ((__SFT__) <= CEC_CFGR_SFT)
+
+#define IS_CEC_TOLERANCE(__RXTOL__) (((__RXTOL__) == CEC_STANDARD_TOLERANCE) || \
+ ((__RXTOL__) == CEC_EXTENDED_TOLERANCE))
+
+#define IS_CEC_BRERXSTOP(__BRERXSTOP__) (((__BRERXSTOP__) == CEC_NO_RX_STOP_ON_BRE) || \
+ ((__BRERXSTOP__) == CEC_RX_STOP_ON_BRE))
+
+#define IS_CEC_BREERRORBITGEN(__ERRORBITGEN__) (((__ERRORBITGEN__) == CEC_BRE_ERRORBIT_NO_GENERATION) || \
+ ((__ERRORBITGEN__) == CEC_BRE_ERRORBIT_GENERATION))
+
+#define IS_CEC_LBPEERRORBITGEN(__ERRORBITGEN__) (((__ERRORBITGEN__) == CEC_LBPE_ERRORBIT_NO_GENERATION) || \
+ ((__ERRORBITGEN__) == CEC_LBPE_ERRORBIT_GENERATION))
+
+#define IS_CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION(__ERRORBITGEN__) (((__ERRORBITGEN__) == CEC_BROADCASTERROR_ERRORBIT_GENERATION) || \
+ ((__ERRORBITGEN__) == CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION))
+
+#define IS_CEC_SFTOP(__SFTOP__) (((__SFTOP__) == CEC_SFT_START_ON_TXSOM) || \
+ ((__SFTOP__) == CEC_SFT_START_ON_TX_RX_END))
+
+#define IS_CEC_LISTENING_MODE(__MODE__) (((__MODE__) == CEC_REDUCED_LISTENING_MODE) || \
+ ((__MODE__) == CEC_FULL_LISTENING_MODE))
+
+/** @brief Check CEC message size.
+ * The message size is the payload size: without counting the header,
+ * it varies from 0 byte (ping operation, one header only, no payload) to
+ * 15 bytes (1 opcode and up to 14 operands following the header).
+ * @param __SIZE__ CEC message size.
+ * @retval Test result (TRUE or FALSE).
+ */
+#define IS_CEC_MSGSIZE(__SIZE__) ((__SIZE__) <= 0x10U)
+
+/** @brief Check CEC device Own Address Register (OAR) setting.
+ * OAR address is written in a 15-bit field within CEC_CFGR register.
+ * @param __ADDRESS__ CEC own address.
+ * @retval Test result (TRUE or FALSE).
+ */
+#define IS_CEC_OWN_ADDRESS(__ADDRESS__) ((__ADDRESS__) <= 0x7FFFU)
+
+/** @brief Check CEC initiator or destination logical address setting.
+ * Initiator and destination addresses are coded over 4 bits.
+ * @param __ADDRESS__ CEC initiator or logical address.
+ * @retval Test result (TRUE or FALSE).
+ */
+#define IS_CEC_ADDRESS(__ADDRESS__) ((__ADDRESS__) <= 0xFU)
+/**
+ * @}
+ */
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup CEC_Private_Functions CEC Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* CEC */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32F0xxHAL_CEC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_comp.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_comp.h
new file mode 100644
index 0000000..1c2daac
--- /dev/null
+++ b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_comp.h
@@ -0,0 +1,700 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_comp.h
+ * @author MCD Application Team
+ * @brief Header file of COMP HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32F0xx_HAL_COMP_H
+#define STM32F0xx_HAL_COMP_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined (COMP1) || defined (COMP2)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup COMP COMP
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup COMP_Exported_Types COMP Exported Types
+ * @{
+ */
+
+/**
+ * @brief COMP Init structure definition
+ */
+typedef struct
+{
+
+ uint32_t InvertingInput; /*!< Selects the inverting input of the comparator.
+ This parameter can be a value of @ref COMP_InvertingInput */
+
+ uint32_t NonInvertingInput; /*!< Selects the non inverting input of the comparator.
+ This parameter can be a value of @ref COMP_NonInvertingInput */
+
+ uint32_t Output; /*!< Selects the output redirection of the comparator.
+ This parameter can be a value of @ref COMP_Output */
+
+ uint32_t OutputPol; /*!< Selects the output polarity of the comparator.
+ This parameter can be a value of @ref COMP_OutputPolarity */
+
+ uint32_t Hysteresis; /*!< Selects the hysteresis voltage of the comparator.
+ This parameter can be a value of @ref COMP_Hysteresis */
+
+ uint32_t Mode; /*!< Selects the operating comsumption mode of the comparator
+ to adjust the speed/consumption.
+ This parameter can be a value of @ref COMP_Mode */
+
+ uint32_t WindowMode; /*!< Selects the window mode of the comparator 1 & 2.
+ This parameter can be a value of @ref COMP_WindowMode */
+
+ uint32_t TriggerMode; /*!< Selects the trigger mode of the comparator (interrupt mode).
+ This parameter can be a value of @ref COMP_TriggerMode */
+
+}COMP_InitTypeDef;
+
+/**
+ * @brief COMP Handle Structure definition
+ */
+typedef struct __COMP_HandleTypeDef
+{
+ COMP_TypeDef *Instance; /*!< Register base address */
+ COMP_InitTypeDef Init; /*!< COMP required parameters */
+ HAL_LockTypeDef Lock; /*!< Locking object */
+ __IO uint32_t State; /*!< COMP communication state
+ This parameter can be a value of @ref COMP_State */
+ __IO uint32_t ErrorCode; /*!< COMP Error code */
+#if (USE_HAL_COMP_REGISTER_CALLBACKS == 1)
+ void (* TriggerCallback)(struct __COMP_HandleTypeDef *hcomp); /*!< COMP trigger callback */
+ void (* MspInitCallback)(struct __COMP_HandleTypeDef *hcomp); /*!< COMP Msp Init callback */
+ void (* MspDeInitCallback)(struct __COMP_HandleTypeDef *hcomp); /*!< COMP Msp DeInit callback */
+#endif /* USE_HAL_COMP_REGISTER_CALLBACKS */
+}COMP_HandleTypeDef;
+
+#if (USE_HAL_COMP_REGISTER_CALLBACKS == 1)
+/**
+ * @brief HAL COMP Callback ID enumeration definition
+ */
+typedef enum
+{
+ HAL_COMP_TRIGGER_CB_ID = 0x00U, /*!< COMP trigger callback ID */
+ HAL_COMP_MSPINIT_CB_ID = 0x01U, /*!< COMP Msp Init callback ID */
+ HAL_COMP_MSPDEINIT_CB_ID = 0x02U /*!< COMP Msp DeInit callback ID */
+} HAL_COMP_CallbackIDTypeDef;
+
+/**
+ * @brief HAL COMP Callback pointer definition
+ */
+typedef void (*pCOMP_CallbackTypeDef)(COMP_HandleTypeDef *hcomp); /*!< pointer to a COMP callback function */
+
+#endif /* USE_HAL_COMP_REGISTER_CALLBACKS */
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup COMP_Exported_Constants COMP Exported Constants
+ * @{
+ */
+
+/** @defgroup COMP_Error_Code COMP Error Code
+ * @{
+ */
+#define HAL_COMP_ERROR_NONE (0x00U) /*!< No error */
+#if (USE_HAL_COMP_REGISTER_CALLBACKS == 1)
+#define HAL_COMP_ERROR_INVALID_CALLBACK (0x01U) /*!< Invalid Callback error */
+#endif /* USE_HAL_COMP_REGISTER_CALLBACKS */
+/**
+ * @}
+ */
+
+/** @defgroup COMP_State COMP State
+ * @{
+ */
+#define HAL_COMP_STATE_RESET (0x00000000U) /*!< COMP not yet initialized or disabled */
+#define HAL_COMP_STATE_READY (0x00000001U) /*!< COMP initialized and ready for use */
+#define HAL_COMP_STATE_READY_LOCKED (0x00000011U) /*!< COMP initialized but the configuration is locked */
+#define HAL_COMP_STATE_BUSY (0x00000002U) /*!< COMP is running */
+#define HAL_COMP_STATE_BUSY_LOCKED (0x00000012U) /*!< COMP is running and the configuration is locked */
+/**
+ * @}
+ */
+
+/** @defgroup COMP_OutputPolarity COMP OutputPolarity
+ * @{
+ */
+#define COMP_OUTPUTPOL_NONINVERTED (0x00000000U) /*!< COMP output on GPIO isn't inverted */
+#define COMP_OUTPUTPOL_INVERTED COMP_CSR_COMP1POL /*!< COMP output on GPIO is inverted */
+/**
+ * @}
+ */
+
+/** @defgroup COMP_Hysteresis COMP Hysteresis
+ * @{
+ */
+#define COMP_HYSTERESIS_NONE (0x00000000U) /*!< No hysteresis */
+#define COMP_HYSTERESIS_LOW COMP_CSR_COMP1HYST_0 /*!< Hysteresis level low */
+#define COMP_HYSTERESIS_MEDIUM COMP_CSR_COMP1HYST_1 /*!< Hysteresis level medium */
+#define COMP_HYSTERESIS_HIGH COMP_CSR_COMP1HYST /*!< Hysteresis level high */
+/**
+ * @}
+ */
+
+/** @defgroup COMP_Mode COMP Mode
+ * @{
+ */
+/* Please refer to the electrical characteristics in the device datasheet for
+ the power consumption values */
+#define COMP_MODE_HIGHSPEED (0x00000000U) /*!< High Speed */
+#define COMP_MODE_MEDIUMSPEED COMP_CSR_COMP1MODE_0 /*!< Medium Speed */
+#define COMP_MODE_LOWPOWER COMP_CSR_COMP1MODE_1 /*!< Low power mode */
+#define COMP_MODE_ULTRALOWPOWER COMP_CSR_COMP1MODE /*!< Ultra-low power mode */
+/**
+ * @}
+ */
+
+/** @defgroup COMP_InvertingInput COMP InvertingInput
+ * @{
+ */
+
+#define COMP_INVERTINGINPUT_1_4VREFINT (0x00000000U) /*!< 1/4 VREFINT connected to comparator inverting input */
+#define COMP_INVERTINGINPUT_1_2VREFINT COMP_CSR_COMP1INSEL_0 /*!< 1/2 VREFINT connected to comparator inverting input */
+#define COMP_INVERTINGINPUT_3_4VREFINT COMP_CSR_COMP1INSEL_1 /*!< 3/4 VREFINT connected to comparator inverting input */
+#define COMP_INVERTINGINPUT_VREFINT (COMP_CSR_COMP1INSEL_1|COMP_CSR_COMP1INSEL_0) /*!< VREFINT connected to comparator inverting input */
+#define COMP_INVERTINGINPUT_DAC1 COMP_CSR_COMP1INSEL_2 /*!< DAC_OUT1 (PA4) connected to comparator inverting input */
+#define COMP_INVERTINGINPUT_DAC1SWITCHCLOSED (COMP_CSR_COMP1INSEL_2|COMP_CSR_COMP1SW1) /*!< DAC_OUT1 (PA4) connected to comparator inverting input
+ and close switch (PA0 for COMP1 only) */
+#define COMP_INVERTINGINPUT_DAC2 (COMP_CSR_COMP1INSEL_2|COMP_CSR_COMP1INSEL_0) /*!< DAC_OUT2 (PA5) connected to comparator inverting input */
+#define COMP_INVERTINGINPUT_IO1 (COMP_CSR_COMP1INSEL_2|COMP_CSR_COMP1INSEL_1) /*!< IO (PA0 for COMP1 and PA2 for COMP2) connected to comparator inverting input */
+/**
+ * @}
+ */
+
+/** @defgroup COMP_NonInvertingInput COMP NonInvertingInput
+ * @{
+ */
+#define COMP_NONINVERTINGINPUT_IO1 (0x00000000U) /*!< I/O1 (PA1 for COMP1, PA3 for COMP2)
+ connected to comparator non inverting input */
+#define COMP_NONINVERTINGINPUT_DAC1SWITCHCLOSED COMP_CSR_COMP1SW1 /*!< DAC ouput connected to comparator COMP1 non inverting input */
+/**
+ * @}
+ */
+
+/** @defgroup COMP_Output COMP Output
+ * @{
+ */
+
+/* Output Redirection common for COMP1 and COMP2 */
+#define COMP_OUTPUT_NONE (0x00000000U) /*!< COMP output isn't connected to other peripherals */
+#define COMP_OUTPUT_TIM1BKIN COMP_CSR_COMP1OUTSEL_0 /*!< COMP output connected to TIM1 Break Input (BKIN) */
+#define COMP_OUTPUT_TIM1IC1 COMP_CSR_COMP1OUTSEL_1 /*!< COMP output connected to TIM1 Input Capture 1 */
+#define COMP_OUTPUT_TIM1OCREFCLR (COMP_CSR_COMP1OUTSEL_1|COMP_CSR_COMP1OUTSEL_0) /*!< COMP output connected to TIM1 OCREF Clear */
+#define COMP_OUTPUT_TIM2IC4 COMP_CSR_COMP1OUTSEL_2 /*!< COMP output connected to TIM2 Input Capture 4 */
+#define COMP_OUTPUT_TIM2OCREFCLR (COMP_CSR_COMP1OUTSEL_2|COMP_CSR_COMP1OUTSEL_0) /*!< COMP output connected to TIM2 OCREF Clear */
+#define COMP_OUTPUT_TIM3IC1 (COMP_CSR_COMP1OUTSEL_2|COMP_CSR_COMP1OUTSEL_1) /*!< COMP output connected to TIM3 Input Capture 1 */
+#define COMP_OUTPUT_TIM3OCREFCLR COMP_CSR_COMP1OUTSEL /*!< COMP output connected to TIM3 OCREF Clear */
+/**
+ * @}
+ */
+
+/** @defgroup COMP_OutputLevel COMP OutputLevel
+ * @{
+ */
+/* When output polarity is not inverted, comparator output is low when
+ the non-inverting input is at a lower voltage than the inverting input*/
+#define COMP_OUTPUTLEVEL_LOW (0x00000000U)
+/* When output polarity is not inverted, comparator output is high when
+ the non-inverting input is at a higher voltage than the inverting input */
+#define COMP_OUTPUTLEVEL_HIGH COMP_CSR_COMP1OUT
+/**
+ * @}
+ */
+
+/** @defgroup COMP_TriggerMode COMP TriggerMode
+ * @{
+ */
+#define COMP_TRIGGERMODE_NONE (0x00000000U) /*!< No External Interrupt trigger detection */
+#define COMP_TRIGGERMODE_IT_RISING (0x00000001U) /*!< External Interrupt Mode with Rising edge trigger detection */
+#define COMP_TRIGGERMODE_IT_FALLING (0x00000002U) /*!< External Interrupt Mode with Falling edge trigger detection */
+#define COMP_TRIGGERMODE_IT_RISING_FALLING (0x00000003U) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
+#define COMP_TRIGGERMODE_EVENT_RISING (0x00000010U) /*!< Event Mode with Rising edge trigger detection */
+#define COMP_TRIGGERMODE_EVENT_FALLING (0x00000020U) /*!< Event Mode with Falling edge trigger detection */
+#define COMP_TRIGGERMODE_EVENT_RISING_FALLING (0x00000030U) /*!< Event Mode with Rising/Falling edge trigger detection */
+/**
+ * @}
+ */
+
+/** @defgroup COMP_WindowMode COMP WindowMode
+ * @{
+ */
+#define COMP_WINDOWMODE_DISABLE (0x00000000U) /*!< Window mode disabled */
+#define COMP_WINDOWMODE_ENABLE COMP_CSR_WNDWEN /*!< Window mode enabled: non inverting input of comparator 2
+ is connected to the non inverting input of comparator 1 (PA1) */
+/**
+ * @}
+ */
+
+/** @defgroup COMP_Flag COMP Flag
+ * @{
+ */
+#define COMP_FLAG_LOCK ((uint32_t)COMP_CSR_COMPxLOCK) /*!< Lock flag */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup COMP_Exported_Macros COMP Exported Macros
+ * @{
+ */
+
+/** @brief Reset COMP handle state
+ * @param __HANDLE__ COMP handle.
+ * @retval None
+ */
+#if (USE_HAL_COMP_REGISTER_CALLBACKS == 1)
+#define __HAL_COMP_RESET_HANDLE_STATE(__HANDLE__) do{ \
+ (__HANDLE__)->State = HAL_COMP_STATE_RESET; \
+ (__HANDLE__)->MspInitCallback = NULL; \
+ (__HANDLE__)->MspDeInitCallback = NULL; \
+ } while(0)
+#else
+#define __HAL_COMP_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_COMP_STATE_RESET)
+#endif
+
+/**
+ * @brief Clear COMP error code (set it to no error code "HAL_COMP_ERROR_NONE").
+ * @param __HANDLE__ COMP handle
+ * @retval None
+ */
+#define COMP_CLEAR_ERRORCODE(__HANDLE__) ((__HANDLE__)->ErrorCode = HAL_COMP_ERROR_NONE)
+
+/**
+ * @brief Enable the specified comparator.
+ * @param __HANDLE__ COMP handle.
+ * @retval None
+ */
+#define __HAL_COMP_ENABLE(__HANDLE__) (((__HANDLE__)->Instance == COMP1) ? \
+ SET_BIT(COMP->CSR, COMP_CSR_COMP1EN) : \
+ SET_BIT(COMP->CSR, COMP_CSR_COMP2EN))
+
+/**
+ * @brief Disable the specified comparator.
+ * @param __HANDLE__ COMP handle.
+ * @retval None
+ */
+#define __HAL_COMP_DISABLE(__HANDLE__) (((__HANDLE__)->Instance == COMP1) ? \
+ CLEAR_BIT(COMP->CSR, COMP_CSR_COMP1EN) : \
+ CLEAR_BIT(COMP->CSR, COMP_CSR_COMP2EN))
+
+/**
+ * @brief Lock the specified comparator configuration.
+ * @param __HANDLE__ COMP handle.
+ * @retval None
+ */
+#define __HAL_COMP_LOCK(__HANDLE__) (((__HANDLE__)->Instance == COMP1) ? \
+ SET_BIT(COMP->CSR, COMP_CSR_COMP1LOCK) : \
+ SET_BIT(COMP->CSR, COMP_CSR_COMP2LOCK))
+
+/**
+ * @brief Enable the COMP1 EXTI line rising edge trigger.
+ * @retval None
+ */
+#define __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR, COMP_EXTI_LINE_COMP1)
+
+/**
+ * @brief Disable the COMP1 EXTI line rising edge trigger.
+ * @retval None
+ */
+#define __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR, COMP_EXTI_LINE_COMP1)
+
+/**
+ * @brief Enable the COMP1 EXTI line falling edge trigger.
+ * @retval None
+ */
+#define __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR, COMP_EXTI_LINE_COMP1)
+
+/**
+ * @brief Disable the COMP1 EXTI line falling edge trigger.
+ * @retval None
+ */
+#define __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR, COMP_EXTI_LINE_COMP1)
+
+/**
+ * @brief Enable the COMP1 EXTI line rising & falling edge trigger.
+ * @retval None
+ */
+#define __HAL_COMP_COMP1_EXTI_ENABLE_RISING_FALLING_EDGE() do { \
+ __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE(); \
+ __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE(); \
+ } while(0)
+
+/**
+ * @brief Disable the COMP1 EXTI line rising & falling edge trigger.
+ * @retval None
+ */
+#define __HAL_COMP_COMP1_EXTI_DISABLE_RISING_FALLING_EDGE() do { \
+ __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE(); \
+ __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE(); \
+ } while(0)
+
+/**
+ * @brief Enable the COMP1 EXTI line in interrupt mode.
+ * @retval None
+ */
+#define __HAL_COMP_COMP1_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR, COMP_EXTI_LINE_COMP1)
+
+/**
+ * @brief Disable the COMP1 EXTI line in interrupt mode.
+ * @retval None
+ */
+#define __HAL_COMP_COMP1_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR, COMP_EXTI_LINE_COMP1)
+
+/**
+ * @brief Generate a software interrupt on the COMP1 EXTI line.
+ * @retval None
+ */
+#define __HAL_COMP_COMP1_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER, COMP_EXTI_LINE_COMP1)
+
+/**
+ * @brief Enable the COMP1 EXTI Line in event mode.
+ * @retval None
+ */
+#define __HAL_COMP_COMP1_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR, COMP_EXTI_LINE_COMP1)
+
+/**
+ * @brief Disable the COMP1 EXTI Line in event mode.
+ * @retval None
+ */
+#define __HAL_COMP_COMP1_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR, COMP_EXTI_LINE_COMP1)
+
+/**
+ * @brief Check whether the COMP1 EXTI line flag is set or not.
+ * @retval RESET or SET
+ */
+#define __HAL_COMP_COMP1_EXTI_GET_FLAG() READ_BIT(EXTI->PR, COMP_EXTI_LINE_COMP1)
+
+/**
+ * @brief Clear the COMP1 EXTI flag.
+ * @retval None
+ */
+#define __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() WRITE_REG(EXTI->PR, COMP_EXTI_LINE_COMP1)
+
+/**
+ * @brief Enable the COMP2 EXTI line rising edge trigger.
+ * @retval None
+ */
+#define __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR, COMP_EXTI_LINE_COMP2)
+
+/**
+ * @brief Disable the COMP2 EXTI line rising edge trigger.
+ * @retval None
+ */
+#define __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR, COMP_EXTI_LINE_COMP2)
+
+/**
+ * @brief Enable the COMP2 EXTI line falling edge trigger.
+ * @retval None
+ */
+#define __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR, COMP_EXTI_LINE_COMP2)
+
+/**
+ * @brief Disable the COMP2 EXTI line falling edge trigger.
+ * @retval None
+ */
+#define __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR, COMP_EXTI_LINE_COMP2)
+
+/**
+ * @brief Enable the COMP2 EXTI line rising & falling edge trigger.
+ * @retval None
+ */
+#define __HAL_COMP_COMP2_EXTI_ENABLE_RISING_FALLING_EDGE() do { \
+ __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE(); \
+ __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE(); \
+ } while(0)
+
+/**
+ * @brief Disable the COMP2 EXTI line rising & falling edge trigger.
+ * @retval None
+ */
+#define __HAL_COMP_COMP2_EXTI_DISABLE_RISING_FALLING_EDGE() do { \
+ __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE(); \
+ __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE(); \
+ } while(0)
+
+/**
+ * @brief Enable the COMP2 EXTI line in interrupt mode.
+ * @retval None
+ */
+#define __HAL_COMP_COMP2_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR, COMP_EXTI_LINE_COMP2)
+
+/**
+ * @brief Disable the COMP2 EXTI line in interrupt mode.
+ * @retval None
+ */
+#define __HAL_COMP_COMP2_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR, COMP_EXTI_LINE_COMP2)
+
+/**
+ * @brief Generate a software interrupt on the COMP2 EXTI line.
+ * @retval None
+ */
+#define __HAL_COMP_COMP2_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER, COMP_EXTI_LINE_COMP2)
+
+/**
+ * @brief Enable the COMP2 EXTI Line in event mode.
+ * @retval None
+ */
+#define __HAL_COMP_COMP2_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR, COMP_EXTI_LINE_COMP2)
+
+/**
+ * @brief Disable the COMP2 EXTI Line in event mode.
+ * @retval None
+ */
+#define __HAL_COMP_COMP2_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR, COMP_EXTI_LINE_COMP2)
+
+/**
+ * @brief Check whether the COMP2 EXTI line flag is set or not.
+ * @retval RESET or SET
+ */
+#define __HAL_COMP_COMP2_EXTI_GET_FLAG() READ_BIT(EXTI->PR, COMP_EXTI_LINE_COMP2)
+
+/**
+ * @brief Clear the COMP2 EXTI flag.
+ * @retval None
+ */
+#define __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() WRITE_REG(EXTI->PR, COMP_EXTI_LINE_COMP2)
+
+/** @brief Check whether the specified COMP flag is set or not.
+ * @param __HANDLE__ specifies the COMP Handle.
+ * @param __FLAG__ specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg COMP_FLAG_LOCK: lock flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_COMP_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->CSR & (__FLAG__)) == (__FLAG__))
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup COMP_Exported_Functions COMP Exported Functions
+ * @{
+ */
+/** @addtogroup COMP_Exported_Functions_Group1 Initialization/de-initialization functions
+ * @brief Initialization and Configuration functions
+ * @{
+ */
+/* Initialization and de-initialization functions ****************************/
+HAL_StatusTypeDef HAL_COMP_Init(COMP_HandleTypeDef *hcomp);
+HAL_StatusTypeDef HAL_COMP_DeInit (COMP_HandleTypeDef *hcomp);
+void HAL_COMP_MspInit(COMP_HandleTypeDef *hcomp);
+void HAL_COMP_MspDeInit(COMP_HandleTypeDef *hcomp);
+
+#if (USE_HAL_COMP_REGISTER_CALLBACKS == 1)
+/* Callbacks Register/UnRegister functions ***********************************/
+HAL_StatusTypeDef HAL_COMP_RegisterCallback(COMP_HandleTypeDef *hcomp, HAL_COMP_CallbackIDTypeDef CallbackID, pCOMP_CallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_COMP_UnRegisterCallback(COMP_HandleTypeDef *hcomp, HAL_COMP_CallbackIDTypeDef CallbackID);
+#endif /* USE_HAL_COMP_REGISTER_CALLBACKS */
+
+/**
+ * @}
+ */
+
+/** @addtogroup COMP_Exported_Functions_Group2 I/O operation functions
+ * @brief Data transfers functions
+ * @{
+ */
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_COMP_Start(COMP_HandleTypeDef *hcomp);
+HAL_StatusTypeDef HAL_COMP_Stop(COMP_HandleTypeDef *hcomp);
+HAL_StatusTypeDef HAL_COMP_Start_IT(COMP_HandleTypeDef *hcomp);
+HAL_StatusTypeDef HAL_COMP_Stop_IT(COMP_HandleTypeDef *hcomp);
+void HAL_COMP_IRQHandler(COMP_HandleTypeDef *hcomp);
+/**
+ * @}
+ */
+
+/** @addtogroup COMP_Exported_Functions_Group3 Peripheral Control functions
+ * @brief management functions
+ * @{
+ */
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef HAL_COMP_Lock(COMP_HandleTypeDef *hcomp);
+uint32_t HAL_COMP_GetOutputLevel(COMP_HandleTypeDef *hcomp);
+
+/* Callback in Interrupt mode */
+void HAL_COMP_TriggerCallback(COMP_HandleTypeDef *hcomp);
+/**
+ * @}
+ */
+
+/** @addtogroup COMP_Exported_Functions_Group4 Peripheral State functions
+ * @brief Peripheral State functions
+ * @{
+ */
+/* Peripheral State and Error functions ***************************************/
+uint32_t HAL_COMP_GetState(COMP_HandleTypeDef *hcomp);
+uint32_t HAL_COMP_GetError(COMP_HandleTypeDef *hcomp);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup COMP_Private_Constants COMP Private Constants
+ * @{
+ */
+/** @defgroup COMP_ExtiLine COMP EXTI Lines
+ * Elements values convention: XXXX0000
+ * - XXXX : Interrupt mask in the EMR/IMR/RTSR/FTSR register
+ * @{
+ */
+#define COMP_EXTI_LINE_COMP1 ((uint32_t)EXTI_IMR_MR21) /*!< EXTI line 21 connected to COMP1 output */
+#define COMP_EXTI_LINE_COMP2 ((uint32_t)EXTI_IMR_MR22) /*!< EXTI line 22 connected to COMP2 output */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup COMP_Private_Macros COMP Private Macros
+ * @{
+ */
+/** @defgroup COMP_GET_EXTI_LINE COMP Private macros to get EXTI line associated with Comparators
+ * @{
+ */
+/**
+ * @brief Get the specified EXTI line for a comparator instance.
+ * @param __INSTANCE__ specifies the COMP instance.
+ * @retval value of @ref COMP_ExtiLine
+ */
+#define COMP_GET_EXTI_LINE(__INSTANCE__) (((__INSTANCE__) == COMP1) ? COMP_EXTI_LINE_COMP1 : \
+ COMP_EXTI_LINE_COMP2)
+/**
+ * @}
+ */
+
+/** @defgroup COMP_IS_COMP_Definitions COMP Private macros to check input parameters
+ * @{
+ */
+
+#define IS_COMP_OUTPUTPOL(POL) (((POL) == COMP_OUTPUTPOL_NONINVERTED) || \
+ ((POL) == COMP_OUTPUTPOL_INVERTED))
+
+#define IS_COMP_HYSTERESIS(HYSTERESIS) (((HYSTERESIS) == COMP_HYSTERESIS_NONE) || \
+ ((HYSTERESIS) == COMP_HYSTERESIS_LOW) || \
+ ((HYSTERESIS) == COMP_HYSTERESIS_MEDIUM) || \
+ ((HYSTERESIS) == COMP_HYSTERESIS_HIGH))
+
+#define IS_COMP_MODE(MODE) (((MODE) == COMP_MODE_HIGHSPEED) || \
+ ((MODE) == COMP_MODE_MEDIUMSPEED) || \
+ ((MODE) == COMP_MODE_LOWPOWER) || \
+ ((MODE) == COMP_MODE_ULTRALOWPOWER))
+
+#define IS_COMP_INVERTINGINPUT(INPUT) (((INPUT) == COMP_INVERTINGINPUT_1_4VREFINT) || \
+ ((INPUT) == COMP_INVERTINGINPUT_1_2VREFINT) || \
+ ((INPUT) == COMP_INVERTINGINPUT_3_4VREFINT) || \
+ ((INPUT) == COMP_INVERTINGINPUT_VREFINT) || \
+ ((INPUT) == COMP_INVERTINGINPUT_DAC1) || \
+ ((INPUT) == COMP_INVERTINGINPUT_DAC1SWITCHCLOSED) || \
+ ((INPUT) == COMP_INVERTINGINPUT_DAC2) || \
+ ((INPUT) == COMP_INVERTINGINPUT_IO1))
+
+#define IS_COMP_NONINVERTINGINPUT(INPUT) (((INPUT) == COMP_NONINVERTINGINPUT_IO1) || \
+ ((INPUT) == COMP_NONINVERTINGINPUT_DAC1SWITCHCLOSED))
+
+#define IS_COMP_OUTPUT(OUTPUT) (((OUTPUT) == COMP_OUTPUT_NONE) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM1BKIN) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM1IC1) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM1OCREFCLR) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM2IC4) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM2OCREFCLR) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM3IC1) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM3OCREFCLR))
+
+#define IS_COMP_WINDOWMODE(WINDOWMODE) (((WINDOWMODE) == COMP_WINDOWMODE_DISABLE) || \
+ ((WINDOWMODE) == COMP_WINDOWMODE_ENABLE))
+
+#define IS_COMP_TRIGGERMODE(__MODE__) (((__MODE__) == COMP_TRIGGERMODE_NONE) || \
+ ((__MODE__) == COMP_TRIGGERMODE_IT_RISING) || \
+ ((__MODE__) == COMP_TRIGGERMODE_IT_FALLING) || \
+ ((__MODE__) == COMP_TRIGGERMODE_IT_RISING_FALLING) || \
+ ((__MODE__) == COMP_TRIGGERMODE_EVENT_RISING) || \
+ ((__MODE__) == COMP_TRIGGERMODE_EVENT_FALLING) || \
+ ((__MODE__) == COMP_TRIGGERMODE_EVENT_RISING_FALLING))
+/**
+ * @}
+ */
+
+/** @defgroup COMP_Lock COMP Lock
+ * @{
+ */
+#define COMP_LOCK_DISABLE (0x00000000U)
+#define COMP_LOCK_ENABLE COMP_CSR_COMP1LOCK
+
+#define COMP_STATE_BIT_LOCK (0x10U)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* COMP1 || COMP2 */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32F0xx_HAL_COMP_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_conf_template.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_conf_template.h
new file mode 100644
index 0000000..f1b1648
--- /dev/null
+++ b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_conf_template.h
@@ -0,0 +1,321 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_conf.h
+ * @author MCD Application Team
+ * @brief HAL configuration file.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_CONF_H
+#define __STM32F0xx_HAL_CONF_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* ########################## Module Selection ############################## */
+/**
+ * @brief This is the list of modules to be used in the HAL driver
+ */
+#define HAL_MODULE_ENABLED
+#define HAL_ADC_MODULE_ENABLED
+#define HAL_CAN_MODULE_ENABLED
+#define HAL_CEC_MODULE_ENABLED
+#define HAL_COMP_MODULE_ENABLED
+#define HAL_CORTEX_MODULE_ENABLED
+#define HAL_CRC_MODULE_ENABLED
+#define HAL_DAC_MODULE_ENABLED
+#define HAL_DMA_MODULE_ENABLED
+#define HAL_FLASH_MODULE_ENABLED
+#define HAL_GPIO_MODULE_ENABLED
+#define HAL_EXTI_MODULE_ENABLED
+#define HAL_I2C_MODULE_ENABLED
+#define HAL_I2S_MODULE_ENABLED
+#define HAL_IRDA_MODULE_ENABLED
+#define HAL_IWDG_MODULE_ENABLED
+#define HAL_PCD_MODULE_ENABLED
+#define HAL_PWR_MODULE_ENABLED
+#define HAL_RCC_MODULE_ENABLED
+#define HAL_RTC_MODULE_ENABLED
+#define HAL_SMARTCARD_MODULE_ENABLED
+#define HAL_SMBUS_MODULE_ENABLED
+#define HAL_SPI_MODULE_ENABLED
+#define HAL_TIM_MODULE_ENABLED
+#define HAL_TSC_MODULE_ENABLED
+#define HAL_UART_MODULE_ENABLED
+#define HAL_USART_MODULE_ENABLED
+#define HAL_WWDG_MODULE_ENABLED
+
+/* ######################### Oscillator Values adaptation ################### */
+/**
+ * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+ * This value is used by the RCC HAL module to compute the system frequency
+ * (when HSE is used as system clock source, directly or through the PLL).
+ */
+#if !defined (HSE_VALUE)
+ #define HSE_VALUE 8000000U /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+/**
+ * @brief In the following line adjust the External High Speed oscillator (HSE) Startup
+ * Timeout value
+ */
+#if !defined (HSE_STARTUP_TIMEOUT)
+ #define HSE_STARTUP_TIMEOUT 100U /*!< Time out for HSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+ * @brief Internal High Speed oscillator (HSI) value.
+ * This value is used by the RCC HAL module to compute the system frequency
+ * (when HSI is used as system clock source, directly or through the PLL).
+ */
+#if !defined (HSI_VALUE)
+ #define HSI_VALUE 8000000U /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+ * @brief In the following line adjust the Internal High Speed oscillator (HSI) Startup
+ * Timeout value
+ */
+#if !defined (HSI_STARTUP_TIMEOUT)
+ #define HSI_STARTUP_TIMEOUT 5000U /*!< Time out for HSI start up */
+#endif /* HSI_STARTUP_TIMEOUT */
+
+/**
+ * @brief Internal High Speed oscillator for ADC (HSI14) value.
+ */
+#if !defined (HSI14_VALUE)
+ #define HSI14_VALUE 14000000U /*!< Value of the Internal High Speed oscillator for ADC in Hz.
+ The real value may vary depending on the variations
+ in voltage and temperature. */
+#endif /* HSI14_VALUE */
+
+/**
+ * @brief Internal High Speed oscillator for USB (HSI48) value.
+ */
+#if !defined (HSI48_VALUE)
+ #define HSI48_VALUE 48000000U /*!< Value of the Internal High Speed oscillator for USB in Hz.
+ The real value may vary depending on the variations
+ in voltage and temperature. */
+#endif /* HSI48_VALUE */
+
+/**
+ * @brief Internal Low Speed oscillator (LSI) value.
+ */
+#if !defined (LSI_VALUE)
+ #define LSI_VALUE 32000U
+#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
+ The real value may vary depending on the variations
+ in voltage and temperature. */
+/**
+ * @brief External Low Speed oscillator (LSE) value.
+ */
+#if !defined (LSE_VALUE)
+ #define LSE_VALUE 32768U /*!< Value of the External Low Speed oscillator in Hz */
+#endif /* LSE_VALUE */
+
+/**
+ * @brief Time out for LSE start up value in ms.
+ */
+#if !defined (LSE_STARTUP_TIMEOUT)
+ #define LSE_STARTUP_TIMEOUT 5000U /*!< Time out for LSE start up, in ms */
+#endif /* LSE_STARTUP_TIMEOUT */
+
+
+/* Tip: To avoid modifying this file each time you need to use different HSE,
+ === you can define the HSE value in your toolchain compiler preprocessor. */
+
+/* ########################### System Configuration ######################### */
+/**
+ * @brief This is the HAL system configuration section
+ */
+#define VDD_VALUE 3300U /*!< Value of VDD in mv */
+#define TICK_INT_PRIORITY ((uint32_t)(1U<<__NVIC_PRIO_BITS) - 1U) /*!< tick interrupt priority (lowest by default) */
+ /* Warning: Must be set to higher priority for HAL_Delay() */
+ /* and HAL_GetTick() usage under interrupt context */
+#define USE_RTOS 0U
+#define PREFETCH_ENABLE 1U
+#define INSTRUCTION_CACHE_ENABLE 0U
+#define DATA_CACHE_ENABLE 0U
+#define USE_SPI_CRC 1U
+
+#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */
+#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */
+#define USE_HAL_COMP_REGISTER_CALLBACKS 0U /* COMP register callback disabled */
+#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */
+#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */
+#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */
+#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */
+#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */
+#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */
+#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */
+#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */
+#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */
+#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */
+#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */
+#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */
+#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */
+#define USE_HAL_TSC_REGISTER_CALLBACKS 0U /* TSC register callback disabled */
+#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */
+
+/* ########################## Assert Selection ############################## */
+/**
+ * @brief Uncomment the line below to expanse the "assert_param" macro in the
+ * HAL drivers code
+ */
+/*#define USE_FULL_ASSERT 1*/
+
+/* Includes ------------------------------------------------------------------*/
+/**
+ * @brief Include module's header file
+ */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+ #include "stm32f0xx_hal_rcc.h"
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+ #include "stm32f0xx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+
+#ifdef HAL_EXTI_MODULE_ENABLED
+ #include "stm32f0xx_hal_exti.h"
+#endif /* HAL_EXTI_MODULE_ENABLED */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+ #include "stm32f0xx_hal_dma.h"
+#endif /* HAL_DMA_MODULE_ENABLED */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+ #include "stm32f0xx_hal_cortex.h"
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+ #include "stm32f0xx_hal_adc.h"
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_CAN_MODULE_ENABLED
+ #include "stm32f0xx_hal_can.h"
+#endif /* HAL_CAN_MODULE_ENABLED */
+
+#ifdef HAL_CEC_MODULE_ENABLED
+ #include "stm32f0xx_hal_cec.h"
+#endif /* HAL_CEC_MODULE_ENABLED */
+
+#ifdef HAL_COMP_MODULE_ENABLED
+ #include "stm32f0xx_hal_comp.h"
+#endif /* HAL_COMP_MODULE_ENABLED */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+ #include "stm32f0xx_hal_crc.h"
+#endif /* HAL_CRC_MODULE_ENABLED */
+
+#ifdef HAL_DAC_MODULE_ENABLED
+ #include "stm32f0xx_hal_dac.h"
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+ #include "stm32f0xx_hal_flash.h"
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+ #include "stm32f0xx_hal_i2c.h"
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+#ifdef HAL_I2S_MODULE_ENABLED
+ #include "stm32f0xx_hal_i2s.h"
+#endif /* HAL_I2S_MODULE_ENABLED */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+ #include "stm32f0xx_hal_irda.h"
+#endif /* HAL_IRDA_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+ #include "stm32f0xx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_PCD_MODULE_ENABLED
+ #include "stm32f0xx_hal_pcd.h"
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+ #include "stm32f0xx_hal_pwr.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+ #include "stm32f0xx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+ #include "stm32f0xx_hal_smartcard.h"
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+#ifdef HAL_SMBUS_MODULE_ENABLED
+ #include "stm32f0xx_hal_smbus.h"
+#endif /* HAL_SMBUS_MODULE_ENABLED */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+ #include "stm32f0xx_hal_spi.h"
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+ #include "stm32f0xx_hal_tim.h"
+#endif /* HAL_TIM_MODULE_ENABLED */
+
+#ifdef HAL_TSC_MODULE_ENABLED
+ #include "stm32f0xx_hal_tsc.h"
+#endif /* HAL_TSC_MODULE_ENABLED */
+
+#ifdef HAL_UART_MODULE_ENABLED
+ #include "stm32f0xx_hal_uart.h"
+#endif /* HAL_UART_MODULE_ENABLED */
+
+#ifdef HAL_USART_MODULE_ENABLED
+ #include "stm32f0xx_hal_usart.h"
+#endif /* HAL_USART_MODULE_ENABLED */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+ #include "stm32f0xx_hal_wwdg.h"
+#endif /* HAL_WWDG_MODULE_ENABLED */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef USE_FULL_ASSERT
+/**
+ * @brief The assert_param macro is used for function's parameters check.
+ * @param expr If expr is false, it calls assert_failed function
+ * which reports the name of the source file and the source
+ * line number of the call that failed.
+ * If expr is true, it returns no value.
+ * @retval None
+ */
+ #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+ void assert_failed(uint8_t* file, uint32_t line);
+#else
+ #define assert_param(expr) ((void)0U)
+#endif /* USE_FULL_ASSERT */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_CONF_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h
new file mode 100644
index 0000000..e471200
--- /dev/null
+++ b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_cortex.h
@@ -0,0 +1,133 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_cortex.h
+ * @author MCD Application Team
+ * @brief Header file of CORTEX HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_CORTEX_H
+#define __STM32F0xx_HAL_CORTEX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup CORTEX CORTEX
+ * @{
+ */
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup CORTEX_Exported_Constants CORTEX Exported Constants
+ * @{
+ */
+
+/** @defgroup CORTEX_SysTick_clock_source CORTEX SysTick clock source
+ * @{
+ */
+#define SYSTICK_CLKSOURCE_HCLK_DIV8 (0x00000000U)
+#define SYSTICK_CLKSOURCE_HCLK (0x00000004U)
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported Macros -----------------------------------------------------------*/
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup CORTEX_Exported_Functions CORTEX Exported Functions
+ * @{
+ */
+/** @addtogroup CORTEX_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ * @{
+ */
+/* Initialization and de-initialization functions *******************************/
+void HAL_NVIC_SetPriority(IRQn_Type IRQn,uint32_t PreemptPriority, uint32_t SubPriority);
+void HAL_NVIC_EnableIRQ(IRQn_Type IRQn);
+void HAL_NVIC_DisableIRQ(IRQn_Type IRQn);
+void HAL_NVIC_SystemReset(void);
+uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb);
+/**
+ * @}
+ */
+
+/** @addtogroup CORTEX_Exported_Functions_Group2 Peripheral Control functions
+ * @brief Cortex control functions
+ * @{
+ */
+
+/* Peripheral Control functions *************************************************/
+uint32_t HAL_NVIC_GetPriority(IRQn_Type IRQn);
+uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn);
+void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn);
+void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn);
+void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource);
+void HAL_SYSTICK_IRQHandler(void);
+void HAL_SYSTICK_Callback(void);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup CORTEX_Private_Macros CORTEX Private Macros
+ * @{
+ */
+#define IS_NVIC_PREEMPTION_PRIORITY(PRIORITY) ((PRIORITY) < 0x4)
+
+#define IS_NVIC_DEVICE_IRQ(IRQ) ((IRQ) >= 0x00)
+
+#define IS_SYSTICK_CLK_SOURCE(SOURCE) (((SOURCE) == SYSTICK_CLKSOURCE_HCLK) || \
+ ((SOURCE) == SYSTICK_CLKSOURCE_HCLK_DIV8))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_CORTEX_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_crc.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_crc.h
new file mode 100644
index 0000000..24105c0
--- /dev/null
+++ b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_crc.h
@@ -0,0 +1,357 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_crc.h
+ * @author MCD Application Team
+ * @brief Header file of CRC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32F0xx_HAL_CRC_H
+#define STM32F0xx_HAL_CRC_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup CRC
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup CRC_Exported_Types CRC Exported Types
+ * @{
+ */
+
+/**
+ * @brief CRC HAL State Structure definition
+ */
+typedef enum
+{
+ HAL_CRC_STATE_RESET = 0x00U, /*!< CRC not yet initialized or disabled */
+ HAL_CRC_STATE_READY = 0x01U, /*!< CRC initialized and ready for use */
+ HAL_CRC_STATE_BUSY = 0x02U, /*!< CRC internal process is ongoing */
+ HAL_CRC_STATE_TIMEOUT = 0x03U, /*!< CRC timeout state */
+ HAL_CRC_STATE_ERROR = 0x04U /*!< CRC error state */
+} HAL_CRC_StateTypeDef;
+
+/**
+ * @brief CRC Init Structure definition
+ */
+typedef struct
+{
+#if defined(CRC_POL_POL)
+ uint8_t DefaultPolynomialUse; /*!< This parameter is a value of @ref CRC_Default_Polynomial and indicates if default polynomial is used.
+ If set to DEFAULT_POLYNOMIAL_ENABLE, resort to default
+ X^32 + X^26 + X^23 + X^22 + X^16 + X^12 + X^11 + X^10 +X^8 + X^7 + X^5 + X^4 + X^2+ X +1.
+ In that case, there is no need to set GeneratingPolynomial field.
+ If otherwise set to DEFAULT_POLYNOMIAL_DISABLE, GeneratingPolynomial and CRCLength fields must be set. */
+#endif /* CRC_POL_POL */
+
+ uint8_t DefaultInitValueUse; /*!< This parameter is a value of @ref CRC_Default_InitValue_Use and indicates if default init value is used.
+ If set to DEFAULT_INIT_VALUE_ENABLE, resort to default
+ 0xFFFFFFFF value. In that case, there is no need to set InitValue field.
+ If otherwise set to DEFAULT_INIT_VALUE_DISABLE, InitValue field must be set. */
+
+#if defined(CRC_POL_POL)
+ uint32_t GeneratingPolynomial; /*!< Set CRC generating polynomial as a 7, 8, 16 or 32-bit long value for a polynomial degree
+ respectively equal to 7, 8, 16 or 32. This field is written in normal representation,
+ e.g., for a polynomial of degree 7, X^7 + X^6 + X^5 + X^2 + 1 is written 0x65.
+ No need to specify it if DefaultPolynomialUse is set to DEFAULT_POLYNOMIAL_ENABLE. */
+
+ uint32_t CRCLength; /*!< This parameter is a value of @ref CRC_Polynomial_Sizes and indicates CRC length.
+ Value can be either one of
+ @arg @ref CRC_POLYLENGTH_32B (32-bit CRC),
+ @arg @ref CRC_POLYLENGTH_16B (16-bit CRC),
+ @arg @ref CRC_POLYLENGTH_8B (8-bit CRC),
+ @arg @ref CRC_POLYLENGTH_7B (7-bit CRC). */
+#endif /* CRC_POL_POL */
+
+ uint32_t InitValue; /*!< Init value to initiate CRC computation. No need to specify it if DefaultInitValueUse
+ is set to DEFAULT_INIT_VALUE_ENABLE. */
+
+ uint32_t InputDataInversionMode; /*!< This parameter is a value of @ref CRCEx_Input_Data_Inversion and specifies input data inversion mode.
+ Can be either one of the following values
+ @arg @ref CRC_INPUTDATA_INVERSION_NONE no input data inversion
+ @arg @ref CRC_INPUTDATA_INVERSION_BYTE byte-wise inversion, 0x1A2B3C4D becomes 0x58D43CB2
+ @arg @ref CRC_INPUTDATA_INVERSION_HALFWORD halfword-wise inversion, 0x1A2B3C4D becomes 0xD458B23C
+ @arg @ref CRC_INPUTDATA_INVERSION_WORD word-wise inversion, 0x1A2B3C4D becomes 0xB23CD458 */
+
+ uint32_t OutputDataInversionMode; /*!< This parameter is a value of @ref CRCEx_Output_Data_Inversion and specifies output data (i.e. CRC) inversion mode.
+ Can be either
+ @arg @ref CRC_OUTPUTDATA_INVERSION_DISABLE no CRC inversion,
+ @arg @ref CRC_OUTPUTDATA_INVERSION_ENABLE CRC 0x11223344 is converted into 0x22CC4488 */
+} CRC_InitTypeDef;
+
+/**
+ * @brief CRC Handle Structure definition
+ */
+typedef struct
+{
+ CRC_TypeDef *Instance; /*!< Register base address */
+
+ CRC_InitTypeDef Init; /*!< CRC configuration parameters */
+
+ HAL_LockTypeDef Lock; /*!< CRC Locking object */
+
+ __IO HAL_CRC_StateTypeDef State; /*!< CRC communication state */
+
+ uint32_t InputDataFormat; /*!< This parameter is a value of @ref CRC_Input_Buffer_Format and specifies input data format.
+ Can be either
+ @arg @ref CRC_INPUTDATA_FORMAT_BYTES input data is a stream of bytes (8-bit data)
+ @arg @ref CRC_INPUTDATA_FORMAT_HALFWORDS input data is a stream of half-words (16-bit data)
+ @arg @ref CRC_INPUTDATA_FORMAT_WORDS input data is a stream of words (32-bit data)
+
+ Note that constant CRC_INPUT_FORMAT_UNDEFINED is defined but an initialization error
+ must occur if InputBufferFormat is not one of the three values listed above */
+} CRC_HandleTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup CRC_Exported_Constants CRC Exported Constants
+ * @{
+ */
+
+#if defined(CRC_POL_POL)
+/** @defgroup CRC_Default_Polynomial_Value Default CRC generating polynomial
+ * @{
+ */
+#define DEFAULT_CRC32_POLY 0x04C11DB7U /*!< X^32 + X^26 + X^23 + X^22 + X^16 + X^12 + X^11 + X^10 +X^8 + X^7 + X^5 + X^4 + X^2+ X +1 */
+/**
+ * @}
+ */
+#endif /* CRC_POL_POL */
+
+/** @defgroup CRC_Default_InitValue Default CRC computation initialization value
+ * @{
+ */
+#define DEFAULT_CRC_INITVALUE 0xFFFFFFFFU /*!< Initial CRC default value */
+/**
+ * @}
+ */
+
+#if defined(CRC_POL_POL)
+/** @defgroup CRC_Default_Polynomial Indicates whether or not default polynomial is used
+ * @{
+ */
+#define DEFAULT_POLYNOMIAL_ENABLE ((uint8_t)0x00U) /*!< Enable default generating polynomial 0x04C11DB7 */
+#define DEFAULT_POLYNOMIAL_DISABLE ((uint8_t)0x01U) /*!< Disable default generating polynomial 0x04C11DB7 */
+/**
+ * @}
+ */
+#endif /* CRC_POL_POL */
+
+/** @defgroup CRC_Default_InitValue_Use Indicates whether or not default init value is used
+ * @{
+ */
+#define DEFAULT_INIT_VALUE_ENABLE ((uint8_t)0x00U) /*!< Enable initial CRC default value */
+#define DEFAULT_INIT_VALUE_DISABLE ((uint8_t)0x01U) /*!< Disable initial CRC default value */
+/**
+ * @}
+ */
+
+#if defined(CRC_POL_POL)
+/** @defgroup CRC_Polynomial_Sizes Polynomial sizes to configure the peripheral
+ * @{
+ */
+#define CRC_POLYLENGTH_32B 0x00000000U /*!< Resort to a 32-bit long generating polynomial */
+#define CRC_POLYLENGTH_16B CRC_CR_POLYSIZE_0 /*!< Resort to a 16-bit long generating polynomial */
+#define CRC_POLYLENGTH_8B CRC_CR_POLYSIZE_1 /*!< Resort to a 8-bit long generating polynomial */
+#define CRC_POLYLENGTH_7B CRC_CR_POLYSIZE /*!< Resort to a 7-bit long generating polynomial */
+/**
+ * @}
+ */
+
+/** @defgroup CRC_Polynomial_Size_Definitions CRC polynomial possible sizes actual definitions
+ * @{
+ */
+#define HAL_CRC_LENGTH_32B 32U /*!< 32-bit long CRC */
+#define HAL_CRC_LENGTH_16B 16U /*!< 16-bit long CRC */
+#define HAL_CRC_LENGTH_8B 8U /*!< 8-bit long CRC */
+#define HAL_CRC_LENGTH_7B 7U /*!< 7-bit long CRC */
+/**
+ * @}
+ */
+#endif /* CRC_POL_POL */
+
+/** @defgroup CRC_Input_Buffer_Format Input Buffer Format
+ * @{
+ */
+/* WARNING: CRC_INPUT_FORMAT_UNDEFINED is created for reference purposes but
+ * an error is triggered in HAL_CRC_Init() if InputDataFormat field is set
+ * to CRC_INPUT_FORMAT_UNDEFINED: the format MUST be defined by the user for
+ * the CRC APIs to provide a correct result */
+#define CRC_INPUTDATA_FORMAT_UNDEFINED 0x00000000U /*!< Undefined input data format */
+#define CRC_INPUTDATA_FORMAT_BYTES 0x00000001U /*!< Input data in byte format */
+#define CRC_INPUTDATA_FORMAT_HALFWORDS 0x00000002U /*!< Input data in half-word format */
+#define CRC_INPUTDATA_FORMAT_WORDS 0x00000003U /*!< Input data in word format */
+/**
+ * @}
+ */
+
+/** @defgroup CRC_Aliases CRC API aliases
+ * @{
+ */
+#define HAL_CRC_Input_Data_Reverse HAL_CRCEx_Input_Data_Reverse /*!< Aliased to HAL_CRCEx_Input_Data_Reverse for inter STM32 series compatibility */
+#define HAL_CRC_Output_Data_Reverse HAL_CRCEx_Output_Data_Reverse /*!< Aliased to HAL_CRCEx_Output_Data_Reverse for inter STM32 series compatibility */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup CRC_Exported_Macros CRC Exported Macros
+ * @{
+ */
+
+/** @brief Reset CRC handle state.
+ * @param __HANDLE__ CRC handle.
+ * @retval None
+ */
+#define __HAL_CRC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CRC_STATE_RESET)
+
+/**
+ * @brief Reset CRC Data Register.
+ * @param __HANDLE__ CRC handle
+ * @retval None
+ */
+#define __HAL_CRC_DR_RESET(__HANDLE__) ((__HANDLE__)->Instance->CR |= CRC_CR_RESET)
+
+/**
+ * @brief Set CRC INIT non-default value
+ * @param __HANDLE__ CRC handle
+ * @param __INIT__ 32-bit initial value
+ * @retval None
+ */
+#define __HAL_CRC_INITIALCRCVALUE_CONFIG(__HANDLE__, __INIT__) ((__HANDLE__)->Instance->INIT = (__INIT__))
+
+/**
+ * @brief Store data in the Independent Data (ID) register.
+ * @param __HANDLE__ CRC handle
+ * @param __VALUE__ Value to be stored in the ID register
+ * @note Refer to the Reference Manual to get the authorized __VALUE__ length in bits
+ * @retval None
+ */
+#define __HAL_CRC_SET_IDR(__HANDLE__, __VALUE__) (WRITE_REG((__HANDLE__)->Instance->IDR, (__VALUE__)))
+
+/**
+ * @brief Return the data stored in the Independent Data (ID) register.
+ * @param __HANDLE__ CRC handle
+ * @note Refer to the Reference Manual to get the authorized __VALUE__ length in bits
+ * @retval Value of the ID register
+ */
+#define __HAL_CRC_GET_IDR(__HANDLE__) (((__HANDLE__)->Instance->IDR) & CRC_IDR_IDR)
+/**
+ * @}
+ */
+
+
+/* Private macros --------------------------------------------------------*/
+/** @defgroup CRC_Private_Macros CRC Private Macros
+ * @{
+ */
+
+#if defined(CRC_POL_POL)
+#define IS_DEFAULT_POLYNOMIAL(DEFAULT) (((DEFAULT) == DEFAULT_POLYNOMIAL_ENABLE) || \
+ ((DEFAULT) == DEFAULT_POLYNOMIAL_DISABLE))
+#endif /* CRC_POL_POL */
+
+#define IS_DEFAULT_INIT_VALUE(VALUE) (((VALUE) == DEFAULT_INIT_VALUE_ENABLE) || \
+ ((VALUE) == DEFAULT_INIT_VALUE_DISABLE))
+
+#if defined(CRC_POL_POL)
+#define IS_CRC_POL_LENGTH(LENGTH) (((LENGTH) == CRC_POLYLENGTH_32B) || \
+ ((LENGTH) == CRC_POLYLENGTH_16B) || \
+ ((LENGTH) == CRC_POLYLENGTH_8B) || \
+ ((LENGTH) == CRC_POLYLENGTH_7B))
+#endif /* CRC_POL_POL */
+
+#define IS_CRC_INPUTDATA_FORMAT(FORMAT) (((FORMAT) == CRC_INPUTDATA_FORMAT_BYTES) || \
+ ((FORMAT) == CRC_INPUTDATA_FORMAT_HALFWORDS) || \
+ ((FORMAT) == CRC_INPUTDATA_FORMAT_WORDS))
+
+/**
+ * @}
+ */
+
+/* Include CRC HAL Extended module */
+#include "stm32f0xx_hal_crc_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup CRC_Exported_Functions CRC Exported Functions
+ * @{
+ */
+
+/* Initialization and de-initialization functions ****************************/
+/** @defgroup CRC_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+HAL_StatusTypeDef HAL_CRC_Init(CRC_HandleTypeDef *hcrc);
+HAL_StatusTypeDef HAL_CRC_DeInit(CRC_HandleTypeDef *hcrc);
+void HAL_CRC_MspInit(CRC_HandleTypeDef *hcrc);
+void HAL_CRC_MspDeInit(CRC_HandleTypeDef *hcrc);
+/**
+ * @}
+ */
+
+/* Peripheral Control functions ***********************************************/
+/** @defgroup CRC_Exported_Functions_Group2 Peripheral Control functions
+ * @{
+ */
+uint32_t HAL_CRC_Accumulate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength);
+uint32_t HAL_CRC_Calculate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength);
+/**
+ * @}
+ */
+
+/* Peripheral State and Error functions ***************************************/
+/** @defgroup CRC_Exported_Functions_Group3 Peripheral State functions
+ * @{
+ */
+HAL_CRC_StateTypeDef HAL_CRC_GetState(CRC_HandleTypeDef *hcrc);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32F0xx_HAL_CRC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_crc_ex.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_crc_ex.h
new file mode 100644
index 0000000..761ca94
--- /dev/null
+++ b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_crc_ex.h
@@ -0,0 +1,153 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_crc_ex.h
+ * @author MCD Application Team
+ * @brief Header file of CRC HAL extended module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32F0xx_HAL_CRC_EX_H
+#define STM32F0xx_HAL_CRC_EX_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup CRCEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup CRCEx_Exported_Constants CRC Extended Exported Constants
+ * @{
+ */
+
+/** @defgroup CRCEx_Input_Data_Inversion Input Data Inversion Modes
+ * @{
+ */
+#define CRC_INPUTDATA_INVERSION_NONE 0x00000000U /*!< No input data inversion */
+#define CRC_INPUTDATA_INVERSION_BYTE CRC_CR_REV_IN_0 /*!< Byte-wise input data inversion */
+#define CRC_INPUTDATA_INVERSION_HALFWORD CRC_CR_REV_IN_1 /*!< HalfWord-wise input data inversion */
+#define CRC_INPUTDATA_INVERSION_WORD CRC_CR_REV_IN /*!< Word-wise input data inversion */
+/**
+ * @}
+ */
+
+/** @defgroup CRCEx_Output_Data_Inversion Output Data Inversion Modes
+ * @{
+ */
+#define CRC_OUTPUTDATA_INVERSION_DISABLE 0x00000000U /*!< No output data inversion */
+#define CRC_OUTPUTDATA_INVERSION_ENABLE CRC_CR_REV_OUT /*!< Bit-wise output data inversion */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup CRCEx_Exported_Macros CRC Extended Exported Macros
+ * @{
+ */
+
+/**
+ * @brief Set CRC output reversal
+ * @param __HANDLE__ CRC handle
+ * @retval None
+ */
+#define __HAL_CRC_OUTPUTREVERSAL_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= CRC_CR_REV_OUT)
+
+/**
+ * @brief Unset CRC output reversal
+ * @param __HANDLE__ CRC handle
+ * @retval None
+ */
+#define __HAL_CRC_OUTPUTREVERSAL_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(CRC_CR_REV_OUT))
+
+/**
+ * @brief Set CRC non-default polynomial
+ * @param __HANDLE__ CRC handle
+ * @param __POLYNOMIAL__ 7, 8, 16 or 32-bit polynomial
+ * @retval None
+ */
+#define __HAL_CRC_POLYNOMIAL_CONFIG(__HANDLE__, __POLYNOMIAL__) ((__HANDLE__)->Instance->POL = (__POLYNOMIAL__))
+
+/**
+ * @}
+ */
+
+/* Private macros --------------------------------------------------------*/
+/** @defgroup CRCEx_Private_Macros CRC Extended Private Macros
+ * @{
+ */
+
+#define IS_CRC_INPUTDATA_INVERSION_MODE(MODE) (((MODE) == CRC_INPUTDATA_INVERSION_NONE) || \
+ ((MODE) == CRC_INPUTDATA_INVERSION_BYTE) || \
+ ((MODE) == CRC_INPUTDATA_INVERSION_HALFWORD) || \
+ ((MODE) == CRC_INPUTDATA_INVERSION_WORD))
+
+#define IS_CRC_OUTPUTDATA_INVERSION_MODE(MODE) (((MODE) == CRC_OUTPUTDATA_INVERSION_DISABLE) || \
+ ((MODE) == CRC_OUTPUTDATA_INVERSION_ENABLE))
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup CRCEx_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup CRCEx_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization and de-initialization functions ****************************/
+HAL_StatusTypeDef HAL_CRCEx_Polynomial_Set(CRC_HandleTypeDef *hcrc, uint32_t Pol, uint32_t PolyLength);
+HAL_StatusTypeDef HAL_CRCEx_Input_Data_Reverse(CRC_HandleTypeDef *hcrc, uint32_t InputReverseMode);
+HAL_StatusTypeDef HAL_CRCEx_Output_Data_Reverse(CRC_HandleTypeDef *hcrc, uint32_t OutputReverseMode);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32F0xx_HAL_CRC_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dac.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dac.h
new file mode 100644
index 0000000..d613be8
--- /dev/null
+++ b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dac.h
@@ -0,0 +1,429 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_dac.h
+ * @author MCD Application Team
+ * @brief Header file of DAC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32F0xx_HAL_DAC_H
+#define STM32F0xx_HAL_DAC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+#if defined (DAC1)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup DAC
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup DAC_Exported_Types DAC Exported Types
+ * @{
+ */
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_DAC_STATE_RESET = 0x00U, /*!< DAC not yet initialized or disabled */
+ HAL_DAC_STATE_READY = 0x01U, /*!< DAC initialized and ready for use */
+ HAL_DAC_STATE_BUSY = 0x02U, /*!< DAC internal processing is ongoing */
+ HAL_DAC_STATE_TIMEOUT = 0x03U, /*!< DAC timeout state */
+ HAL_DAC_STATE_ERROR = 0x04U /*!< DAC error state */
+
+}HAL_DAC_StateTypeDef;
+
+/**
+ * @brief DAC handle Structure definition
+ */
+typedef struct __DAC_HandleTypeDef
+{
+ DAC_TypeDef *Instance; /*!< Register base address */
+
+ __IO HAL_DAC_StateTypeDef State; /*!< DAC communication state */
+
+ HAL_LockTypeDef Lock; /*!< DAC locking object */
+
+ DMA_HandleTypeDef *DMA_Handle1; /*!< Pointer DMA handler for channel 1 */
+
+ DMA_HandleTypeDef *DMA_Handle2; /*!< Pointer DMA handler for channel 2 */
+
+ __IO uint32_t ErrorCode; /*!< DAC Error code */
+
+#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1)
+ void (* ConvCpltCallbackCh1) (struct __DAC_HandleTypeDef *hdac);
+ void (* ConvHalfCpltCallbackCh1) (struct __DAC_HandleTypeDef *hdac);
+ void (* ErrorCallbackCh1) (struct __DAC_HandleTypeDef *hdac);
+ void (* DMAUnderrunCallbackCh1) (struct __DAC_HandleTypeDef *hdac);
+ void (* ConvCpltCallbackCh2) (struct __DAC_HandleTypeDef* hdac);
+ void (* ConvHalfCpltCallbackCh2) (struct __DAC_HandleTypeDef* hdac);
+ void (* ErrorCallbackCh2) (struct __DAC_HandleTypeDef* hdac);
+ void (* DMAUnderrunCallbackCh2) (struct __DAC_HandleTypeDef* hdac);
+
+ void (* MspInitCallback) (struct __DAC_HandleTypeDef *hdac);
+ void (* MspDeInitCallback ) (struct __DAC_HandleTypeDef *hdac);
+#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */
+
+}DAC_HandleTypeDef;
+
+/**
+ * @brief DAC Configuration regular Channel structure definition
+ */
+typedef struct
+{
+ uint32_t DAC_Trigger; /*!< Specifies the external trigger for the selected DAC channel.
+ This parameter can be a value of @ref DAC_trigger_selection */
+
+ uint32_t DAC_OutputBuffer; /*!< Specifies whether the DAC channel output buffer is enabled or disabled.
+ This parameter can be a value of @ref DAC_output_buffer */
+
+}DAC_ChannelConfTypeDef;
+
+#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1)
+/**
+ * @brief HAL DAC Callback ID enumeration definition
+ */
+typedef enum
+{
+ HAL_DAC_CH1_COMPLETE_CB_ID = 0x00U, /*!< DAC CH1 Complete Callback ID */
+ HAL_DAC_CH1_HALF_COMPLETE_CB_ID = 0x01U, /*!< DAC CH1 half Complete Callback ID */
+ HAL_DAC_CH1_ERROR_ID = 0x02U, /*!< DAC CH1 error Callback ID */
+ HAL_DAC_CH1_UNDERRUN_CB_ID = 0x03U, /*!< DAC CH1 underrun Callback ID */
+ HAL_DAC_CH2_COMPLETE_CB_ID = 0x04U, /*!< DAC CH2 Complete Callback ID */
+ HAL_DAC_CH2_HALF_COMPLETE_CB_ID = 0x05U, /*!< DAC CH2 half Complete Callback ID */
+ HAL_DAC_CH2_ERROR_ID = 0x06U, /*!< DAC CH2 error Callback ID */
+ HAL_DAC_CH2_UNDERRUN_CB_ID = 0x07U, /*!< DAC CH2 underrun Callback ID */
+ HAL_DAC_MSPINIT_CB_ID = 0x08U, /*!< DAC MspInit Callback ID */
+ HAL_DAC_MSPDEINIT_CB_ID = 0x09U, /*!< DAC MspDeInit Callback ID */
+ HAL_DAC_ALL_CB_ID = 0x0AU /*!< DAC All ID */
+} HAL_DAC_CallbackIDTypeDef;
+
+/**
+ * @brief HAL DAC Callback pointer definition
+ */
+typedef void (*pDAC_CallbackTypeDef)(DAC_HandleTypeDef *hdac);
+#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup DAC_Exported_Constants DAC Exported Constants
+ * @{
+ */
+
+/** @defgroup DAC_Error_Code DAC Error Code
+ * @{
+ */
+#define HAL_DAC_ERROR_NONE 0x00U /*!< No error */
+#define HAL_DAC_ERROR_DMAUNDERRUNCH1 0x01U /*!< DAC channel1 DMA underrun error */
+#define HAL_DAC_ERROR_DMAUNDERRUNCH2 0x02U /*!< DAC channel2 DMA underrun error */
+#define HAL_DAC_ERROR_DMA 0x04U /*!< DMA error */
+#define HAL_DAC_ERROR_TIMEOUT 0x08U /*!< Timeout error */
+#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1)
+#define HAL_DAC_ERROR_INVALID_CALLBACK 0x10U /*!< Invalid callback error */
+#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */
+/**
+ * @}
+ */
+
+/** @defgroup DAC_output_buffer DAC output buffer
+ * @{
+ */
+#define DAC_OUTPUTBUFFER_ENABLE (0x00000000U)
+#define DAC_OUTPUTBUFFER_DISABLE ((uint32_t)DAC_CR_BOFF1)
+
+/**
+ * @}
+ */
+
+/** @defgroup DAC_data_alignment DAC data alignment
+ * @{
+ */
+#define DAC_ALIGN_12B_R (0x00000000U)
+#define DAC_ALIGN_12B_L (0x00000004U)
+#define DAC_ALIGN_8B_R (0x00000008U)
+
+/**
+ * @}
+ */
+
+/** @defgroup DAC_flags_definition DAC flags definition
+ * @{
+ */
+#define DAC_FLAG_DMAUDR1 ((uint32_t)DAC_SR_DMAUDR1)
+#define DAC_FLAG_DMAUDR2 ((uint32_t)DAC_SR_DMAUDR2)
+/**
+ * @}
+ */
+
+/** @defgroup DAC_IT_definition DAC IT definition
+ * @{
+ */
+#define DAC_IT_DMAUDR1 ((uint32_t)DAC_SR_DMAUDR1)
+#define DAC_IT_DMAUDR2 ((uint32_t)DAC_SR_DMAUDR2)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup DAC_Exported_Macros DAC Exported Macros
+ * @{
+ */
+
+/** @brief Reset DAC handle state
+ * @param __HANDLE__ specifies the DAC handle.
+ * @retval None
+ */
+#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1)
+#define __HAL_DAC_RESET_HANDLE_STATE(__HANDLE__) do { \
+ (__HANDLE__)->State = HAL_DAC_STATE_RESET; \
+ (__HANDLE__)->MspInitCallback = NULL; \
+ (__HANDLE__)->MspDeInitCallback = NULL; \
+ } while(0)
+#else
+#define __HAL_DAC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DAC_STATE_RESET)
+#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */
+
+/** @brief Enable the DAC channel
+ * @param __HANDLE__ specifies the DAC handle.
+ * @param __DAC_Channel__ specifies the DAC channel
+ * @retval None
+ */
+#define __HAL_DAC_ENABLE(__HANDLE__, __DAC_Channel__) \
+((__HANDLE__)->Instance->CR |= (DAC_CR_EN1 << (__DAC_Channel__)))
+
+/** @brief Disable the DAC channel
+ * @param __HANDLE__ specifies the DAC handle
+ * @param __DAC_Channel__ specifies the DAC channel.
+ * @retval None
+ */
+#define __HAL_DAC_DISABLE(__HANDLE__, __DAC_Channel__) \
+((__HANDLE__)->Instance->CR &= ~(DAC_CR_EN1 << (__DAC_Channel__)))
+
+/** @brief Enable the DAC interrupt
+ * @param __HANDLE__ specifies the DAC handle
+ * @param __INTERRUPT__ specifies the DAC interrupt.
+ * This parameter can be any combination of the following values:
+ * @arg DAC_IT_DMAUDR1: DAC channel 1 DMA underrun interrupt
+ * @arg DAC_IT_DMAUDR2: DAC channel 2 DMA underrun interrupt
+ * @retval None
+ */
+#define __HAL_DAC_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR) |= (__INTERRUPT__))
+
+/** @brief Disable the DAC interrupt
+ * @param __HANDLE__ specifies the DAC handle
+ * @param __INTERRUPT__ specifies the DAC interrupt.
+ * This parameter can be any combination of the following values:
+ * @arg DAC_IT_DMAUDR1: DAC channel 1 DMA underrun interrupt
+ * @retval None
+ */
+#define __HAL_DAC_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR) &= ~(__INTERRUPT__))
+
+/** @brief Check whether the specified DAC interrupt source is enabled or not
+ * @param __HANDLE__ DAC handle
+ * @param __INTERRUPT__ DAC interrupt source to check
+ * This parameter can be any combination of the following values:
+ * @arg DAC_IT_DMAUDR1: DAC channel 1 DMA underrun interrupt
+ * @arg DAC_IT_DMAUDR2: DAC channel 2 DMA underrun interrupt
+ * @retval State of interruption (SET or RESET)
+ */
+#define __HAL_DAC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR & (__INTERRUPT__)) == (__INTERRUPT__))
+
+/** @brief Get the selected DAC's flag status
+ * @param __HANDLE__ specifies the DAC handle.
+ * @param __FLAG__ specifies the DAC flag to get.
+ * This parameter can be any combination of the following values:
+ * @arg DAC_FLAG_DMAUDR1: DAC channel 1 DMA underrun flag
+ * @retval None
+ */
+#define __HAL_DAC_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clear the DAC's flag
+ * @param __HANDLE__ specifies the DAC handle.
+ * @param __FLAG__ specifies the DAC flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg DAC_FLAG_DMAUDR1: DAC channel 1 DMA underrun flag
+ * @retval None
+ */
+#define __HAL_DAC_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR) = (__FLAG__))
+
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+
+/** @addtogroup DAC_Private_Macros
+ * @{
+ */
+#define IS_DAC_OUTPUT_BUFFER_STATE(STATE) (((STATE) == DAC_OUTPUTBUFFER_ENABLE) || \
+ ((STATE) == DAC_OUTPUTBUFFER_DISABLE))
+
+
+#if defined(DAC_CHANNEL2_SUPPORT)
+
+#define IS_DAC_CHANNEL(CHANNEL) (((CHANNEL) == DAC_CHANNEL_1) || \
+ ((CHANNEL) == DAC_CHANNEL_2))
+
+#else
+
+#define IS_DAC_CHANNEL(CHANNEL) (((CHANNEL) == DAC_CHANNEL_1))
+
+#endif /* DAC_CHANNEL2_SUPPORT */
+
+
+#define IS_DAC_ALIGN(ALIGN) (((ALIGN) == DAC_ALIGN_12B_R) || \
+ ((ALIGN) == DAC_ALIGN_12B_L) || \
+ ((ALIGN) == DAC_ALIGN_8B_R))
+
+#define IS_DAC_DATA(DATA) ((DATA) <= 0xFFF0U)
+
+/** @brief Set DHR12R1 alignment
+ * @param __ALIGNMENT__ specifies the DAC alignment
+ * @retval None
+ */
+#define DAC_DHR12R1_ALIGNMENT(__ALIGNMENT__) ((0x00000008U) + (__ALIGNMENT__))
+
+/** @brief Set DHR12R2 alignment
+ * @param __ALIGNMENT__ specifies the DAC alignment
+ * @retval None
+ */
+#define DAC_DHR12R2_ALIGNMENT(__ALIGNMENT__) ((0x00000014U) + (__ALIGNMENT__))
+
+/** @brief Set DHR12RD alignment
+ * @param __ALIGNMENT__ specifies the DAC alignment
+ * @retval None
+ */
+#define DAC_DHR12RD_ALIGNMENT(__ALIGNMENT__) ((0x00000020U) + (__ALIGNMENT__))
+
+/**
+ * @}
+ */
+
+/* Include DAC HAL Extension module */
+#include "stm32f0xx_hal_dac_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup DAC_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup DAC_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization and de-initialization functions *****************************/
+HAL_StatusTypeDef HAL_DAC_Init(DAC_HandleTypeDef* hdac);
+HAL_StatusTypeDef HAL_DAC_DeInit(DAC_HandleTypeDef* hdac);
+void HAL_DAC_MspInit(DAC_HandleTypeDef* hdac);
+void HAL_DAC_MspDeInit(DAC_HandleTypeDef* hdac);
+
+/**
+ * @}
+ */
+
+/** @addtogroup DAC_Exported_Functions_Group2
+ * @{
+ */
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_DAC_Start(DAC_HandleTypeDef* hdac, uint32_t Channel);
+HAL_StatusTypeDef HAL_DAC_Stop(DAC_HandleTypeDef* hdac, uint32_t Channel);
+HAL_StatusTypeDef HAL_DAC_Start_DMA(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t* pData, uint32_t Length, uint32_t Alignment);
+HAL_StatusTypeDef HAL_DAC_Stop_DMA(DAC_HandleTypeDef* hdac, uint32_t Channel);
+
+void HAL_DAC_IRQHandler(DAC_HandleTypeDef* hdac);
+
+HAL_StatusTypeDef HAL_DAC_SetValue(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t Alignment, uint32_t Data);
+
+void HAL_DAC_ConvCpltCallbackCh1(DAC_HandleTypeDef* hdac);
+void HAL_DAC_ConvHalfCpltCallbackCh1(DAC_HandleTypeDef* hdac);
+void HAL_DAC_ErrorCallbackCh1(DAC_HandleTypeDef *hdac);
+void HAL_DAC_DMAUnderrunCallbackCh1(DAC_HandleTypeDef *hdac);
+
+#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1)
+/* DAC callback registering/unregistering */
+HAL_StatusTypeDef HAL_DAC_RegisterCallback (DAC_HandleTypeDef *hdac, HAL_DAC_CallbackIDTypeDef CallbackId, pDAC_CallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_DAC_UnRegisterCallback (DAC_HandleTypeDef *hdac, HAL_DAC_CallbackIDTypeDef CallbackId);
+#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */
+
+/**
+ * @}
+ */
+
+/** @addtogroup DAC_Exported_Functions_Group3
+ * @{
+ */
+/* Peripheral Control functions ***********************************************/
+uint32_t HAL_DAC_GetValue(DAC_HandleTypeDef* hdac, uint32_t Channel);
+
+HAL_StatusTypeDef HAL_DAC_ConfigChannel(DAC_HandleTypeDef* hdac, DAC_ChannelConfTypeDef* sConfig, uint32_t Channel);
+/**
+ * @}
+ */
+
+/** @addtogroup DAC_Exported_Functions_Group4
+ * @{
+ */
+/* Peripheral State and Error functions ***************************************/
+HAL_DAC_StateTypeDef HAL_DAC_GetState(DAC_HandleTypeDef* hdac);
+uint32_t HAL_DAC_GetError(DAC_HandleTypeDef *hdac);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* DAC1 */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* STM32F0xx_HAL_DAC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dac_ex.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dac_ex.h
new file mode 100644
index 0000000..84fd756
--- /dev/null
+++ b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dac_ex.h
@@ -0,0 +1,292 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_dac_ex.h
+ * @author MCD Application Team
+ * @brief Header file of DAC HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_DAC_EX_H
+#define __STM32F0xx_HAL_DAC_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+#if defined(STM32F051x8) || defined(STM32F058xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup DACEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup DACEx_Exported_Constants DACEx Exported Constants
+ * @{
+ */
+
+/** @defgroup DACEx_lfsrunmask_triangleamplitude DACEx lfsrunmask triangleamplitude
+ * @{
+ */
+#define DAC_LFSRUNMASK_BIT0 (0x00000000U) /*!< Unmask DAC channel LFSR bit0 for noise wave generation */
+#define DAC_LFSRUNMASK_BITS1_0 ((uint32_t)DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[1:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS2_0 ((uint32_t)DAC_CR_MAMP1_1) /*!< Unmask DAC channel LFSR bit[2:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS3_0 ((uint32_t)DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0)/*!< Unmask DAC channel LFSR bit[3:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS4_0 ((uint32_t)DAC_CR_MAMP1_2) /*!< Unmask DAC channel LFSR bit[4:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS5_0 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[5:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS6_0 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1) /*!< Unmask DAC channel LFSR bit[6:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS7_0 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[7:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS8_0 ((uint32_t)DAC_CR_MAMP1_3) /*!< Unmask DAC channel LFSR bit[8:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS9_0 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[9:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS10_0 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1) /*!< Unmask DAC channel LFSR bit[10:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS11_0 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[11:0] for noise wave generation */
+#define DAC_TRIANGLEAMPLITUDE_1 (0x00000000U) /*!< Select max triangle amplitude of 1 */
+#define DAC_TRIANGLEAMPLITUDE_3 ((uint32_t)DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 3 */
+#define DAC_TRIANGLEAMPLITUDE_7 ((uint32_t)DAC_CR_MAMP1_1) /*!< Select max triangle amplitude of 7 */
+#define DAC_TRIANGLEAMPLITUDE_15 ((uint32_t)DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 15 */
+#define DAC_TRIANGLEAMPLITUDE_31 ((uint32_t)DAC_CR_MAMP1_2) /*!< Select max triangle amplitude of 31 */
+#define DAC_TRIANGLEAMPLITUDE_63 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 63 */
+#define DAC_TRIANGLEAMPLITUDE_127 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1) /*!< Select max triangle amplitude of 127 */
+#define DAC_TRIANGLEAMPLITUDE_255 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 255 */
+#define DAC_TRIANGLEAMPLITUDE_511 ((uint32_t)DAC_CR_MAMP1_3) /*!< Select max triangle amplitude of 511 */
+#define DAC_TRIANGLEAMPLITUDE_1023 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 1023 */
+#define DAC_TRIANGLEAMPLITUDE_2047 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1) /*!< Select max triangle amplitude of 2047 */
+#define DAC_TRIANGLEAMPLITUDE_4095 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 4095 */
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+
+/** @defgroup DACEx_Exported_Macros DACEx Exported Macros
+ * @{
+ */
+
+/** @defgroup DAC_trigger_selection DAC trigger selection
+ * @{
+ */
+#if defined(STM32F051x8) || defined(STM32F058xx)
+
+#define DAC_TRIGGER_NONE (0x00000000U) /*!< Conversion is automatic once the DAC1_DHRxxxx register
+ has been loaded, and not by external trigger */
+#define DAC_TRIGGER_T2_TRGO ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TEN1)) /*!< TIM2 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T3_TRGO ((uint32_t)(DAC_CR_TSEL1_0 | DAC_CR_TEN1)) /*!< TIM3 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T6_TRGO ((uint32_t)DAC_CR_TEN1) /*!< TIM6 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T15_TRGO ((uint32_t)(DAC_CR_TSEL1_1 | DAC_CR_TSEL1_0 | DAC_CR_TEN1)) /*!< TIM15 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_EXT_IT9 ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TSEL1_1 | DAC_CR_TEN1)) /*!< EXTI Line9 event selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_SOFTWARE ((uint32_t)(DAC_CR_TSEL1 | DAC_CR_TEN1)) /*!< Conversion started by software trigger for DAC channel */
+
+#endif /* STM32F051x8 || STM32F058xx */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+#define DAC_TRIGGER_NONE (0x00000000U) /*!< Conversion is automatic once the DAC1_DHRxxxx register
+ has been loaded, and not by external trigger */
+#define DAC_TRIGGER_T2_TRGO ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TEN1)) /*!< TIM2 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T3_TRGO ((uint32_t)(DAC_CR_TSEL1_0 | DAC_CR_TEN1)) /*!< TIM3 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T6_TRGO ((uint32_t)DAC_CR_TEN1) /*!< TIM6 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T7_TRGO ((uint32_t)(DAC_CR_TSEL1_1 | DAC_CR_TEN1)) /*!< TIM7 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T15_TRGO ((uint32_t)(DAC_CR_TSEL1_1 | DAC_CR_TSEL1_0 | DAC_CR_TEN1)) /*!< TIM15 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_EXT_IT9 ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TSEL1_1 | DAC_CR_TEN1)) /*!< EXTI Line9 event selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_SOFTWARE ((uint32_t)(DAC_CR_TSEL1 | DAC_CR_TEN1)) /*!< Conversion started by software trigger for DAC channel */
+
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+/**
+ * @}
+ */
+
+/** @defgroup DAC_Channel_selection DAC Channel selection
+ * @{
+ */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+#define DAC_CHANNEL_1 (0x00000000U)
+#define DAC_CHANNEL_2 (0x00000010U)
+
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F051x8) || defined(STM32F058xx)
+
+#define DAC_CHANNEL_1 (0x00000000U)
+
+#endif /* STM32F051x8 || STM32F058xx */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+
+/** @addtogroup DACEx_Private_Macros
+ * @{
+ */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+#define IS_DAC_TRIGGER(TRIGGER) (((TRIGGER) == DAC_TRIGGER_NONE) || \
+ ((TRIGGER) == DAC_TRIGGER_T2_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T3_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T6_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T7_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T15_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_EXT_IT9) || \
+ ((TRIGGER) == DAC_TRIGGER_SOFTWARE))
+
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F051x8) || defined(STM32F058xx)
+
+#define IS_DAC_TRIGGER(TRIGGER) (((TRIGGER) == DAC_TRIGGER_NONE) || \
+ ((TRIGGER) == DAC_TRIGGER_T2_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T3_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T6_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T15_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_EXT_IT9) || \
+ ((TRIGGER) == DAC_TRIGGER_SOFTWARE))
+
+#endif /* STM32F051x8 || STM32F058xx */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+#define IS_DAC_TRIGGER(TRIGGER) (((TRIGGER) == DAC_TRIGGER_NONE) || \
+ ((TRIGGER) == DAC_TRIGGER_T2_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T3_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T6_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T7_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T15_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_EXT_IT9) || \
+ ((TRIGGER) == DAC_TRIGGER_SOFTWARE))
+
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+#define IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(VALUE) (((VALUE) == DAC_LFSRUNMASK_BIT0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS1_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS2_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS3_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS4_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS5_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS6_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS7_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS8_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS9_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS10_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS11_0) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_1) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_3) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_7) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_15) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_31) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_63) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_127) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_255) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_511) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_1023) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_2047) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_4095))
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup DACEx_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup DACEx_Exported_Functions_Group1
+ * @{
+ */
+/* IO operation functions *****************************************************/
+
+HAL_StatusTypeDef HAL_DACEx_TriangleWaveGenerate(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t Amplitude);
+HAL_StatusTypeDef HAL_DACEx_NoiseWaveGenerate(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t Amplitude);
+HAL_StatusTypeDef HAL_DACEx_DualSetValue(DAC_HandleTypeDef* hdac, uint32_t Alignment, uint32_t Data1, uint32_t Data2);
+
+void HAL_DACEx_ConvCpltCallbackCh2(DAC_HandleTypeDef* hdac);
+void HAL_DACEx_ConvHalfCpltCallbackCh2(DAC_HandleTypeDef* hdac);
+void HAL_DACEx_ErrorCallbackCh2(DAC_HandleTypeDef* hdac);
+void HAL_DACEx_DMAUnderrunCallbackCh2(DAC_HandleTypeDef* hdac);
+
+/**
+ * @}
+ */
+
+/** @addtogroup DACEx_Exported_Functions_Group3
+ * @{
+ */
+/* Peripheral Control functions ***********************************************/
+
+uint32_t HAL_DACEx_DualGetValue(DAC_HandleTypeDef* hdac);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32F0xx_HAL_DAC_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h
new file mode 100644
index 0000000..1d2c9f8
--- /dev/null
+++ b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_def.h
@@ -0,0 +1,166 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_def.h
+ * @author MCD Application Team
+ * @brief This file contains HAL common defines, enumeration, macros and
+ * structures definitions.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_DEF
+#define __STM32F0xx_HAL_DEF
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx.h"
+#if defined(USE_HAL_LEGACY)
+ #include "Legacy/stm32_hal_legacy.h"
+#endif
+#include <stddef.h>
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief HAL Status structures definition
+ */
+typedef enum
+{
+ HAL_OK = 0x00U,
+ HAL_ERROR = 0x01U,
+ HAL_BUSY = 0x02U,
+ HAL_TIMEOUT = 0x03U
+} HAL_StatusTypeDef;
+
+/**
+ * @brief HAL Lock structures definition
+ */
+typedef enum
+{
+ HAL_UNLOCKED = 0x00U,
+ HAL_LOCKED = 0x01U
+} HAL_LockTypeDef;
+
+/* Exported macro ------------------------------------------------------------*/
+
+#define HAL_MAX_DELAY 0xFFFFFFFFU
+
+#define HAL_IS_BIT_SET(REG, BIT) (((REG) & (BIT)) == (BIT))
+#define HAL_IS_BIT_CLR(REG, BIT) (((REG) & (BIT)) == 0U)
+
+#define __HAL_LINKDMA(__HANDLE__, __PPP_DMA_FIELD_, __DMA_HANDLE_) \
+ do{ \
+ (__HANDLE__)->__PPP_DMA_FIELD_ = &(__DMA_HANDLE_); \
+ (__DMA_HANDLE_).Parent = (__HANDLE__); \
+ } while(0)
+
+#define UNUSED(X) (void)X /* To avoid gcc/g++ warnings */
+
+/** @brief Reset the Handle's State field.
+ * @param __HANDLE__ specifies the Peripheral Handle.
+ * @note This macro can be used for the following purpose:
+ * - When the Handle is declared as local variable; before passing it as parameter
+ * to HAL_PPP_Init() for the first time, it is mandatory to use this macro
+ * to set to 0 the Handle's "State" field.
+ * Otherwise, "State" field may have any random value and the first time the function
+ * HAL_PPP_Init() is called, the low level hardware initialization will be missed
+ * (i.e. HAL_PPP_MspInit() will not be executed).
+ * - When there is a need to reconfigure the low level hardware: instead of calling
+ * HAL_PPP_DeInit() then HAL_PPP_Init(), user can make a call to this macro then HAL_PPP_Init().
+ * In this later function, when the Handle's "State" field is set to 0, it will execute the function
+ * HAL_PPP_MspInit() which will reconfigure the low level hardware.
+ * @retval None
+ */
+#define __HAL_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = 0)
+
+#if (USE_RTOS == 1)
+ #error " USE_RTOS should be 0 in the current HAL release "
+#else
+ #define __HAL_LOCK(__HANDLE__) \
+ do{ \
+ if((__HANDLE__)->Lock == HAL_LOCKED) \
+ { \
+ return HAL_BUSY; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Lock = HAL_LOCKED; \
+ } \
+ }while (0)
+
+ #define __HAL_UNLOCK(__HANDLE__) \
+ do{ \
+ (__HANDLE__)->Lock = HAL_UNLOCKED; \
+ }while (0)
+#endif /* USE_RTOS */
+
+#if defined ( __GNUC__ )
+ #ifndef __weak
+ #define __weak __attribute__((weak))
+ #endif /* __weak */
+ #ifndef __packed
+ #define __packed __attribute__((__packed__))
+ #endif /* __packed */
+#endif /* __GNUC__ */
+
+
+/* Macro to get variable aligned on 4-bytes, for __ICCARM__ the directive "#pragma data_alignment=4" must be used instead */
+#if defined (__GNUC__) /* GNU Compiler */
+ #ifndef __ALIGN_END
+ #define __ALIGN_END __attribute__ ((aligned (4)))
+ #endif /* __ALIGN_END */
+ #ifndef __ALIGN_BEGIN
+ #define __ALIGN_BEGIN
+ #endif /* __ALIGN_BEGIN */
+#else
+ #ifndef __ALIGN_END
+ #define __ALIGN_END
+ #endif /* __ALIGN_END */
+ #ifndef __ALIGN_BEGIN
+ #if defined (__CC_ARM) /* ARM Compiler */
+ #define __ALIGN_BEGIN __align(4)
+ #elif defined (__ICCARM__) /* IAR Compiler */
+ #define __ALIGN_BEGIN
+ #endif /* __CC_ARM */
+ #endif /* __ALIGN_BEGIN */
+#endif /* __GNUC__ */
+
+/**
+ * @brief __NOINLINE definition
+ */
+#if defined ( __CC_ARM ) || defined ( __GNUC__ )
+/* ARM & GNUCompiler
+ ----------------
+*/
+#define __NOINLINE __attribute__ ( (noinline) )
+
+#elif defined ( __ICCARM__ )
+/* ICCARM Compiler
+ ---------------
+*/
+#define __NOINLINE _Pragma("optimize = no_inline")
+
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* ___STM32F0xx_HAL_DEF */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h
new file mode 100644
index 0000000..db71942
--- /dev/null
+++ b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h
@@ -0,0 +1,563 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_dma.h
+ * @author MCD Application Team
+ * @brief Header file of DMA HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_DMA_H
+#define __STM32F0xx_HAL_DMA_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup DMA
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup DMA_Exported_Types DMA Exported Types
+ * @{
+ */
+
+/**
+ * @brief DMA Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t Direction; /*!< Specifies if the data will be transferred from memory to peripheral,
+ from memory to memory or from peripheral to memory.
+ This parameter can be a value of @ref DMA_Data_transfer_direction */
+
+ uint32_t PeriphInc; /*!< Specifies whether the Peripheral address register should be incremented or not.
+ This parameter can be a value of @ref DMA_Peripheral_incremented_mode */
+
+ uint32_t MemInc; /*!< Specifies whether the memory address register should be incremented or not.
+ This parameter can be a value of @ref DMA_Memory_incremented_mode */
+
+ uint32_t PeriphDataAlignment; /*!< Specifies the Peripheral data width.
+ This parameter can be a value of @ref DMA_Peripheral_data_size */
+
+ uint32_t MemDataAlignment; /*!< Specifies the Memory data width.
+ This parameter can be a value of @ref DMA_Memory_data_size */
+
+ uint32_t Mode; /*!< Specifies the operation mode of the DMAy Channelx.
+ This parameter can be a value of @ref DMA_mode
+ @note The circular buffer mode cannot be used if the memory-to-memory
+ data transfer is configured on the selected Channel */
+
+ uint32_t Priority; /*!< Specifies the software priority for the DMAy Channelx.
+ This parameter can be a value of @ref DMA_Priority_level */
+} DMA_InitTypeDef;
+
+/**
+ * @brief HAL DMA State structures definition
+ */
+typedef enum
+{
+ HAL_DMA_STATE_RESET = 0x00U, /*!< DMA not yet initialized or disabled */
+ HAL_DMA_STATE_READY = 0x01U, /*!< DMA initialized and ready for use */
+ HAL_DMA_STATE_BUSY = 0x02U, /*!< DMA process is ongoing */
+ HAL_DMA_STATE_TIMEOUT = 0x03U /*!< DMA timeout state */
+}HAL_DMA_StateTypeDef;
+
+/**
+ * @brief HAL DMA Error Code structure definition
+ */
+typedef enum
+{
+ HAL_DMA_FULL_TRANSFER = 0x00U, /*!< Full transfer */
+ HAL_DMA_HALF_TRANSFER = 0x01U /*!< Half Transfer */
+}HAL_DMA_LevelCompleteTypeDef;
+
+/**
+ * @brief HAL DMA Callback ID structure definition
+ */
+typedef enum
+{
+ HAL_DMA_XFER_CPLT_CB_ID = 0x00U, /*!< Full transfer */
+ HAL_DMA_XFER_HALFCPLT_CB_ID = 0x01U, /*!< Half transfer */
+ HAL_DMA_XFER_ERROR_CB_ID = 0x02U, /*!< Error */
+ HAL_DMA_XFER_ABORT_CB_ID = 0x03U, /*!< Abort */
+ HAL_DMA_XFER_ALL_CB_ID = 0x04U /*!< All */
+
+}HAL_DMA_CallbackIDTypeDef;
+
+/**
+ * @brief DMA handle Structure definition
+ */
+typedef struct __DMA_HandleTypeDef
+{
+ DMA_Channel_TypeDef *Instance; /*!< Register base address */
+
+ DMA_InitTypeDef Init; /*!< DMA communication parameters */
+
+ HAL_LockTypeDef Lock; /*!< DMA locking object */
+
+ __IO HAL_DMA_StateTypeDef State; /*!< DMA transfer state */
+
+ void *Parent; /*!< Parent object state */
+
+ void (* XferCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer complete callback */
+
+ void (* XferHalfCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA Half transfer complete callback */
+
+ void (* XferErrorCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer error callback */
+
+ void (* XferAbortCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer abort callback */
+
+ __IO uint32_t ErrorCode; /*!< DMA Error code */
+
+ DMA_TypeDef *DmaBaseAddress; /*!< DMA Channel Base Address */
+
+ uint32_t ChannelIndex; /*!< DMA Channel Index */
+} DMA_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup DMA_Exported_Constants DMA Exported Constants
+ * @{
+ */
+
+/** @defgroup DMA_Error_Code DMA Error Code
+ * @{
+ */
+#define HAL_DMA_ERROR_NONE (0x00000000U) /*!< No error */
+#define HAL_DMA_ERROR_TE (0x00000001U) /*!< Transfer error */
+#define HAL_DMA_ERROR_NO_XFER (0x00000004U) /*!< no ongoin transfer */
+#define HAL_DMA_ERROR_TIMEOUT (0x00000020U) /*!< Timeout error */
+#define HAL_DMA_ERROR_NOT_SUPPORTED (0x00000100U) /*!< Not supported mode */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Data_transfer_direction DMA Data transfer direction
+ * @{
+ */
+#define DMA_PERIPH_TO_MEMORY (0x00000000U) /*!< Peripheral to memory direction */
+#define DMA_MEMORY_TO_PERIPH ((uint32_t)DMA_CCR_DIR) /*!< Memory to peripheral direction */
+#define DMA_MEMORY_TO_MEMORY ((uint32_t)(DMA_CCR_MEM2MEM)) /*!< Memory to memory direction */
+
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Peripheral_incremented_mode DMA Peripheral incremented mode
+ * @{
+ */
+#define DMA_PINC_ENABLE ((uint32_t)DMA_CCR_PINC) /*!< Peripheral increment mode Enable */
+#define DMA_PINC_DISABLE (0x00000000U) /*!< Peripheral increment mode Disable */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Memory_incremented_mode DMA Memory incremented mode
+ * @{
+ */
+#define DMA_MINC_ENABLE ((uint32_t)DMA_CCR_MINC) /*!< Memory increment mode Enable */
+#define DMA_MINC_DISABLE (0x00000000U) /*!< Memory increment mode Disable */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Peripheral_data_size DMA Peripheral data size
+ * @{
+ */
+#define DMA_PDATAALIGN_BYTE (0x00000000U) /*!< Peripheral data alignment : Byte */
+#define DMA_PDATAALIGN_HALFWORD ((uint32_t)DMA_CCR_PSIZE_0) /*!< Peripheral data alignment : HalfWord */
+#define DMA_PDATAALIGN_WORD ((uint32_t)DMA_CCR_PSIZE_1) /*!< Peripheral data alignment : Word */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Memory_data_size DMA Memory data size
+ * @{
+ */
+#define DMA_MDATAALIGN_BYTE (0x00000000U) /*!< Memory data alignment : Byte */
+#define DMA_MDATAALIGN_HALFWORD ((uint32_t)DMA_CCR_MSIZE_0) /*!< Memory data alignment : HalfWord */
+#define DMA_MDATAALIGN_WORD ((uint32_t)DMA_CCR_MSIZE_1) /*!< Memory data alignment : Word */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_mode DMA mode
+ * @{
+ */
+#define DMA_NORMAL (0x00000000U) /*!< Normal Mode */
+#define DMA_CIRCULAR ((uint32_t)DMA_CCR_CIRC) /*!< Circular Mode */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Priority_level DMA Priority level
+ * @{
+ */
+#define DMA_PRIORITY_LOW (0x00000000U) /*!< Priority level : Low */
+#define DMA_PRIORITY_MEDIUM ((uint32_t)DMA_CCR_PL_0) /*!< Priority level : Medium */
+#define DMA_PRIORITY_HIGH ((uint32_t)DMA_CCR_PL_1) /*!< Priority level : High */
+#define DMA_PRIORITY_VERY_HIGH ((uint32_t)DMA_CCR_PL) /*!< Priority level : Very_High */
+/**
+ * @}
+ */
+
+
+/** @defgroup DMA_interrupt_enable_definitions DMA interrupt enable definitions
+ * @{
+ */
+#define DMA_IT_TC ((uint32_t)DMA_CCR_TCIE)
+#define DMA_IT_HT ((uint32_t)DMA_CCR_HTIE)
+#define DMA_IT_TE ((uint32_t)DMA_CCR_TEIE)
+/**
+ * @}
+ */
+
+/** @defgroup DMA_flag_definitions DMA flag definitions
+ * @{
+ */
+
+#define DMA_FLAG_GL1 (0x00000001U) /*!< Channel 1 global interrupt flag */
+#define DMA_FLAG_TC1 (0x00000002U) /*!< Channel 1 transfer complete flag */
+#define DMA_FLAG_HT1 (0x00000004U) /*!< Channel 1 half transfer flag */
+#define DMA_FLAG_TE1 (0x00000008U) /*!< Channel 1 transfer error flag */
+#define DMA_FLAG_GL2 (0x00000010U) /*!< Channel 2 global interrupt flag */
+#define DMA_FLAG_TC2 (0x00000020U) /*!< Channel 2 transfer complete flag */
+#define DMA_FLAG_HT2 (0x00000040U) /*!< Channel 2 half transfer flag */
+#define DMA_FLAG_TE2 (0x00000080U) /*!< Channel 2 transfer error flag */
+#define DMA_FLAG_GL3 (0x00000100U) /*!< Channel 3 global interrupt flag */
+#define DMA_FLAG_TC3 (0x00000200U) /*!< Channel 3 transfer complete flag */
+#define DMA_FLAG_HT3 (0x00000400U) /*!< Channel 3 half transfer flag */
+#define DMA_FLAG_TE3 (0x00000800U) /*!< Channel 3 transfer error flag */
+#define DMA_FLAG_GL4 (0x00001000U) /*!< Channel 4 global interrupt flag */
+#define DMA_FLAG_TC4 (0x00002000U) /*!< Channel 4 transfer complete flag */
+#define DMA_FLAG_HT4 (0x00004000U) /*!< Channel 4 half transfer flag */
+#define DMA_FLAG_TE4 (0x00008000U) /*!< Channel 4 transfer error flag */
+#define DMA_FLAG_GL5 (0x00010000U) /*!< Channel 5 global interrupt flag */
+#define DMA_FLAG_TC5 (0x00020000U) /*!< Channel 5 transfer complete flag */
+#define DMA_FLAG_HT5 (0x00040000U) /*!< Channel 5 half transfer flag */
+#define DMA_FLAG_TE5 (0x00080000U) /*!< Channel 5 transfer error flag */
+#define DMA_FLAG_GL6 (0x00100000U) /*!< Channel 6 global interrupt flag */
+#define DMA_FLAG_TC6 (0x00200000U) /*!< Channel 6 transfer complete flag */
+#define DMA_FLAG_HT6 (0x00400000U) /*!< Channel 6 half transfer flag */
+#define DMA_FLAG_TE6 (0x00800000U) /*!< Channel 6 transfer error flag */
+#define DMA_FLAG_GL7 (0x01000000U) /*!< Channel 7 global interrupt flag */
+#define DMA_FLAG_TC7 (0x02000000U) /*!< Channel 7 transfer complete flag */
+#define DMA_FLAG_HT7 (0x04000000U) /*!< Channel 7 half transfer flag */
+#define DMA_FLAG_TE7 (0x08000000U) /*!< Channel 7 transfer error flag */
+
+/**
+ * @}
+ */
+
+#if defined(SYSCFG_CFGR1_DMA_RMP)
+/** @defgroup HAL_DMA_remapping HAL DMA remapping
+ * Elements values convention: 0xYYYYYYYY
+ * - YYYYYYYY : Position in the SYSCFG register CFGR1
+ * @{
+ */
+#define DMA_REMAP_ADC_DMA_CH2 ((uint32_t)SYSCFG_CFGR1_ADC_DMA_RMP) /*!< ADC DMA remap
+ 0: No remap (ADC DMA requests mapped on DMA channel 1
+ 1: Remap (ADC DMA requests mapped on DMA channel 2 */
+#define DMA_REMAP_USART1_TX_DMA_CH4 ((uint32_t)SYSCFG_CFGR1_USART1TX_DMA_RMP) /*!< USART1 TX DMA remap
+ 0: No remap (USART1_TX DMA request mapped on DMA channel 2
+ 1: Remap (USART1_TX DMA request mapped on DMA channel 4 */
+#define DMA_REMAP_USART1_RX_DMA_CH5 ((uint32_t)SYSCFG_CFGR1_USART1RX_DMA_RMP) /*!< USART1 RX DMA remap
+ 0: No remap (USART1_RX DMA request mapped on DMA channel 3
+ 1: Remap (USART1_RX DMA request mapped on DMA channel 5 */
+#define DMA_REMAP_TIM16_DMA_CH4 ((uint32_t)SYSCFG_CFGR1_TIM16_DMA_RMP) /*!< TIM16 DMA request remap
+ 0: No remap (TIM16_CH1 and TIM16_UP DMA requests mapped on DMA channel 3)
+ 1: Remap (TIM16_CH1 and TIM16_UP DMA requests mapped on DMA channel 4) */
+#define DMA_REMAP_TIM17_DMA_CH2 ((uint32_t)SYSCFG_CFGR1_TIM17_DMA_RMP) /*!< TIM17 DMA request remap
+ 0: No remap (TIM17_CH1 and TIM17_UP DMA requests mapped on DMA channel 1
+ 1: Remap (TIM17_CH1 and TIM17_UP DMA requests mapped on DMA channel 2) */
+#if defined (STM32F070xB)
+#define DMA_REMAP_USART3_DMA_CH32 ((uint32_t)SYSCFG_CFGR1_USART3_DMA_RMP) /*!< USART3 DMA request remapping bit. Available on STM32F070xB devices only.
+ 0: Disabled, need to remap before use
+ 1: Remap (USART3_RX and USART3_TX DMA requests mapped on DMA channel 3 and 2 respectively) */
+
+#endif
+
+#if defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx)
+#define DMA_REMAP_TIM16_DMA_CH6 ((uint32_t)SYSCFG_CFGR1_TIM16_DMA_RMP2) /*!< TIM16 alternate DMA request remapping bit. Available on STM32F07x devices only
+ 0: No alternate remap (TIM16 DMA requestsmapped according to TIM16_DMA_RMP bit)
+ 1: Alternate remap (TIM16_CH1 and TIM16_UP DMA requests mapped on DMA channel 6) */
+#define DMA_REMAP_TIM17_DMA_CH7 ((uint32_t)SYSCFG_CFGR1_TIM17_DMA_RMP2) /*!< TIM17 alternate DMA request remapping bit. Available on STM32F07x devices only
+ 0: No alternate remap (TIM17 DMA requestsmapped according to TIM17_DMA_RMP bit)
+ 1: Alternate remap (TIM17_CH1 and TIM17_UP DMA requests mapped on DMA channel 7) */
+#define DMA_REMAP_SPI2_DMA_CH67 ((uint32_t)SYSCFG_CFGR1_SPI2_DMA_RMP) /*!< SPI2 DMA request remapping bit. Available on STM32F07x devices only.
+ 0: No remap (SPI2_RX and SPI2_TX DMA requests mapped on DMA channel 4 and 5 respectively)
+ 1: Remap (SPI2_RX and SPI2_TX DMA requests mapped on DMA channel 6 and 7 respectively) */
+#define DMA_REMAP_USART2_DMA_CH67 ((uint32_t)SYSCFG_CFGR1_USART2_DMA_RMP) /*!< USART2 DMA request remapping bit. Available on STM32F07x devices only.
+ 0: No remap (USART2_RX and USART2_TX DMA requests mapped on DMA channel 5 and 4 respectively)
+ 1: 1: Remap (USART2_RX and USART2_TX DMA requests mapped on DMA channel 6 and 7 respectively) */
+#define DMA_REMAP_USART3_DMA_CH32 ((uint32_t)SYSCFG_CFGR1_USART3_DMA_RMP) /*!< USART3 DMA request remapping bit. Available on STM32F07x devices only.
+ 0: No remap (USART3_RX and USART3_TX DMA requests mapped on DMA channel 6 and 7 respectively)
+ 1: Remap (USART3_RX and USART3_TX DMA requests mapped on DMA channel 3 and 2 respectively) */
+#define DMA_REMAP_I2C1_DMA_CH76 ((uint32_t)SYSCFG_CFGR1_I2C1_DMA_RMP) /*!< I2C1 DMA request remapping bit. Available on STM32F07x devices only.
+ 0: No remap (I2C1_RX and I2C1_TX DMA requests mapped on DMA channel 3 and 2 respectively)
+ 1: Remap (I2C1_RX and I2C1_TX DMA requests mapped on DMA channel 7 and 6 respectively) */
+#define DMA_REMAP_TIM1_DMA_CH6 ((uint32_t)SYSCFG_CFGR1_TIM1_DMA_RMP) /*!< TIM1 DMA request remapping bit. Available on STM32F07x devices only.
+ 0: No remap (TIM1_CH1, TIM1_CH2 and TIM1_CH3 DMA requests mapped on DMA channel 2, 3 and 4 respectively)
+ 1: Remap (TIM1_CH1, TIM1_CH2 and TIM1_CH3 DMA requests mapped on DMA channel 6 */
+#define DMA_REMAP_TIM2_DMA_CH7 ((uint32_t)SYSCFG_CFGR1_TIM2_DMA_RMP) /*!< TIM2 DMA request remapping bit. Available on STM32F07x devices only.
+ 0: No remap (TIM2_CH2 and TIM2_CH4 DMA requests mapped on DMA channel 3 and 4 respectively)
+ 1: Remap (TIM2_CH2 and TIM2_CH4 DMA requests mapped on DMA channel 7 */
+#define DMA_REMAP_TIM3_DMA_CH6 ((uint32_t)SYSCFG_CFGR1_TIM3_DMA_RMP) /*!< TIM3 DMA request remapping bit. Available on STM32F07x devices only.
+ 0: No remap (TIM3_CH1 and TIM3_TRIG DMA requests mapped on DMA channel 4)
+ 1: Remap (TIM3_CH1 and TIM3_TRIG DMA requests mapped on DMA channel 6) */
+#endif
+
+/**
+ * @}
+ */
+
+#endif /* SYSCFG_CFGR1_DMA_RMP */
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup DMA_Exported_Macros DMA Exported Macros
+ * @{
+ */
+
+/** @brief Reset DMA handle state
+ * @param __HANDLE__ DMA handle.
+ * @retval None
+ */
+#define __HAL_DMA_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DMA_STATE_RESET)
+
+/**
+ * @brief Enable the specified DMA Channel.
+ * @param __HANDLE__ DMA handle
+ * @retval None
+ */
+#define __HAL_DMA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CCR |= DMA_CCR_EN)
+
+/**
+ * @brief Disable the specified DMA Channel.
+ * @param __HANDLE__ DMA handle
+ * @retval None
+ */
+#define __HAL_DMA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CCR &= ~DMA_CCR_EN)
+
+
+/* Interrupt & Flag management */
+
+/**
+ * @brief Enables the specified DMA Channel interrupts.
+ * @param __HANDLE__ DMA handle
+ * @param __INTERRUPT__ specifies the DMA interrupt sources to be enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg DMA_IT_TC: Transfer complete interrupt mask
+ * @arg DMA_IT_HT: Half transfer complete interrupt mask
+ * @arg DMA_IT_TE: Transfer error interrupt mask
+ * @retval None
+ */
+#define __HAL_DMA_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CCR |= (__INTERRUPT__))
+
+/**
+ * @brief Disables the specified DMA Channel interrupts.
+ * @param __HANDLE__ DMA handle
+ * @param __INTERRUPT__ specifies the DMA interrupt sources to be enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg DMA_IT_TC: Transfer complete interrupt mask
+ * @arg DMA_IT_HT: Half transfer complete interrupt mask
+ * @arg DMA_IT_TE: Transfer error interrupt mask
+ * @retval None
+ */
+#define __HAL_DMA_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CCR &= ~(__INTERRUPT__))
+
+/**
+ * @brief Checks whether the specified DMA Channel interrupt is enabled or disabled.
+ * @param __HANDLE__ DMA handle
+ * @param __INTERRUPT__ specifies the DMA interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg DMA_IT_TC: Transfer complete interrupt mask
+ * @arg DMA_IT_HT: Half transfer complete interrupt mask
+ * @arg DMA_IT_TE: Transfer error interrupt mask
+ * @retval The state of DMA_IT (SET or RESET).
+ */
+#define __HAL_DMA_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CCR & (__INTERRUPT__)))
+
+/**
+ * @brief Returns the number of remaining data units in the current DMAy Channelx transfer.
+ * @param __HANDLE__ DMA handle
+ *
+ * @retval The number of remaining data units in the current DMA Channel transfer.
+ */
+#define __HAL_DMA_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->CNDTR)
+
+#if defined(SYSCFG_CFGR1_DMA_RMP)
+/** @brief DMA remapping enable/disable macros
+ * @param __DMA_REMAP__ This parameter can be a value of @ref HAL_DMA_remapping
+ */
+#define __HAL_DMA_REMAP_CHANNEL_ENABLE(__DMA_REMAP__) do {assert_param(IS_DMA_REMAP((__DMA_REMAP__))); \
+ SYSCFG->CFGR1 |= (__DMA_REMAP__); \
+ }while(0)
+#define __HAL_DMA_REMAP_CHANNEL_DISABLE(__DMA_REMAP__) do {assert_param(IS_DMA_REMAP((__DMA_REMAP__))); \
+ SYSCFG->CFGR1 &= ~(__DMA_REMAP__); \
+ }while(0)
+#endif /* SYSCFG_CFGR1_DMA_RMP */
+
+/**
+ * @}
+ */
+
+/* Include DMA HAL Extension module */
+#include "stm32f0xx_hal_dma_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup DMA_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup DMA_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization and de-initialization functions *****************************/
+HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma);
+HAL_StatusTypeDef HAL_DMA_DeInit (DMA_HandleTypeDef *hdma);
+/**
+ * @}
+ */
+
+/** @addtogroup DMA_Exported_Functions_Group2
+ * @{
+ */
+/* Input and Output operation functions *****************************************************/
+HAL_StatusTypeDef HAL_DMA_Start (DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
+HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
+HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma);
+HAL_StatusTypeDef HAL_DMA_Abort_IT(DMA_HandleTypeDef *hdma);
+HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, uint32_t CompleteLevel, uint32_t Timeout);
+void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma);
+HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, void (* pCallback)( DMA_HandleTypeDef * _hdma));
+HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID);
+
+/**
+ * @}
+ */
+
+/** @addtogroup DMA_Exported_Functions_Group3
+ * @{
+ */
+/* Peripheral State and Error functions ***************************************/
+HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma);
+uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup DMA_Private_Macros
+ * @{
+ */
+#define IS_DMA_DIRECTION(DIRECTION) (((DIRECTION) == DMA_PERIPH_TO_MEMORY ) || \
+ ((DIRECTION) == DMA_MEMORY_TO_PERIPH) || \
+ ((DIRECTION) == DMA_MEMORY_TO_MEMORY))
+#define IS_DMA_PERIPHERAL_INC_STATE(STATE) (((STATE) == DMA_PINC_ENABLE) || \
+ ((STATE) == DMA_PINC_DISABLE))
+
+#define IS_DMA_MEMORY_INC_STATE(STATE) (((STATE) == DMA_MINC_ENABLE) || \
+ ((STATE) == DMA_MINC_DISABLE))
+
+#define IS_DMA_PERIPHERAL_DATA_SIZE(SIZE) (((SIZE) == DMA_PDATAALIGN_BYTE) || \
+ ((SIZE) == DMA_PDATAALIGN_HALFWORD) || \
+ ((SIZE) == DMA_PDATAALIGN_WORD))
+
+#define IS_DMA_MEMORY_DATA_SIZE(SIZE) (((SIZE) == DMA_MDATAALIGN_BYTE) || \
+ ((SIZE) == DMA_MDATAALIGN_HALFWORD) || \
+ ((SIZE) == DMA_MDATAALIGN_WORD ))
+
+#define IS_DMA_MODE(MODE) (((MODE) == DMA_NORMAL ) || \
+ ((MODE) == DMA_CIRCULAR))
+#define IS_DMA_PRIORITY(PRIORITY) (((PRIORITY) == DMA_PRIORITY_LOW ) || \
+ ((PRIORITY) == DMA_PRIORITY_MEDIUM) || \
+ ((PRIORITY) == DMA_PRIORITY_HIGH) || \
+ ((PRIORITY) == DMA_PRIORITY_VERY_HIGH))
+#define IS_DMA_BUFFER_SIZE(SIZE) (((SIZE) >= 0x1U) && ((SIZE) < 0x10000U))
+
+#if defined(SYSCFG_CFGR1_DMA_RMP)
+
+#if defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx)
+#define IS_DMA_REMAP(RMP) (((RMP) == DMA_REMAP_ADC_DMA_CH2) || \
+ ((RMP) == DMA_REMAP_USART1_TX_DMA_CH4) || \
+ ((RMP) == DMA_REMAP_USART1_RX_DMA_CH5) || \
+ ((RMP) == DMA_REMAP_TIM16_DMA_CH4) || \
+ ((RMP) == DMA_REMAP_TIM17_DMA_CH2) || \
+ ((RMP) == DMA_REMAP_TIM16_DMA_CH6) || \
+ ((RMP) == DMA_REMAP_TIM17_DMA_CH7) || \
+ ((RMP) == DMA_REMAP_SPI2_DMA_CH67) || \
+ ((RMP) == DMA_REMAP_USART2_DMA_CH67) || \
+ ((RMP) == DMA_REMAP_USART3_DMA_CH32) || \
+ ((RMP) == DMA_REMAP_I2C1_DMA_CH76) || \
+ ((RMP) == DMA_REMAP_TIM1_DMA_CH6) || \
+ ((RMP) == DMA_REMAP_TIM2_DMA_CH7) || \
+ ((RMP) == DMA_REMAP_TIM3_DMA_CH6))
+#elif defined (STM32F070xB)
+#define IS_DMA_REMAP(RMP) (((RMP) == DMA_REMAP_USART3_DMA_CH32) || \
+ ((RMP) == DMA_REMAP_ADC_DMA_CH2) || \
+ ((RMP) == DMA_REMAP_USART1_TX_DMA_CH4) || \
+ ((RMP) == DMA_REMAP_USART1_RX_DMA_CH5) || \
+ ((RMP) == DMA_REMAP_TIM16_DMA_CH4) || \
+ ((RMP) == DMA_REMAP_TIM17_DMA_CH2))
+#else
+#define IS_DMA_REMAP(RMP) (((RMP) == DMA_REMAP_ADC_DMA_CH2) || \
+ ((RMP) == DMA_REMAP_USART1_TX_DMA_CH4) || \
+ ((RMP) == DMA_REMAP_USART1_RX_DMA_CH5) || \
+ ((RMP) == DMA_REMAP_TIM16_DMA_CH4) || \
+ ((RMP) == DMA_REMAP_TIM17_DMA_CH2))
+#endif
+
+#endif /* SYSCFG_CFGR1_DMA_RMP */
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_DMA_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h
new file mode 100644
index 0000000..185f833
--- /dev/null
+++ b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma_ex.h
@@ -0,0 +1,811 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_dma_ex.h
+ * @author MCD Application Team
+ * @brief Header file of DMA HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_DMA_EX_H
+#define __STM32F0xx_HAL_DMA_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup DMAEx DMAEx
+ * @brief DMA HAL module driver
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+/** @defgroup DMAEx_Exported_Constants DMAEx Exported Constants
+ * @{
+ */
+#define DMA1_CHANNEL1_RMP 0x00000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#define DMA1_CHANNEL2_RMP 0x10000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#define DMA1_CHANNEL3_RMP 0x20000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#define DMA1_CHANNEL4_RMP 0x30000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#define DMA1_CHANNEL5_RMP 0x40000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#if !defined(STM32F030xC)
+#define DMA1_CHANNEL6_RMP 0x50000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#define DMA1_CHANNEL7_RMP 0x60000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#define DMA2_CHANNEL1_RMP 0x00000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#define DMA2_CHANNEL2_RMP 0x10000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#define DMA2_CHANNEL3_RMP 0x20000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#define DMA2_CHANNEL4_RMP 0x30000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#define DMA2_CHANNEL5_RMP 0x40000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#endif /* !defined(STM32F030xC) */
+
+/****************** DMA1 remap bit field definition********************/
+/* DMA1 - Channel 1 */
+#define HAL_DMA1_CH1_DEFAULT (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_DEFAULT) /*!< Default remap position for DMA1 */
+#define HAL_DMA1_CH1_ADC (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_ADC) /*!< Remap ADC on DMA1 Channel 1*/
+#define HAL_DMA1_CH1_TIM17_CH1 (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_TIM17_CH1) /*!< Remap TIM17 channel 1 on DMA1 channel 1 */
+#define HAL_DMA1_CH1_TIM17_UP (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_TIM17_UP) /*!< Remap TIM17 up on DMA1 channel 1 */
+#define HAL_DMA1_CH1_USART1_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART1_RX) /*!< Remap USART1 Rx on DMA1 channel 1 */
+#define HAL_DMA1_CH1_USART2_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART2_RX) /*!< Remap USART2 Rx on DMA1 channel 1 */
+#define HAL_DMA1_CH1_USART3_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART3_RX) /*!< Remap USART3 Rx on DMA1 channel 1 */
+#define HAL_DMA1_CH1_USART4_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART4_RX) /*!< Remap USART4 Rx on DMA1 channel 1 */
+#define HAL_DMA1_CH1_USART5_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART5_RX) /*!< Remap USART5 Rx on DMA1 channel 1 */
+#define HAL_DMA1_CH1_USART6_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART6_RX) /*!< Remap USART6 Rx on DMA1 channel 1 */
+#if !defined(STM32F030xC)
+#define HAL_DMA1_CH1_USART7_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART7_RX) /*!< Remap USART7 Rx on DMA1 channel 1 */
+#define HAL_DMA1_CH1_USART8_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART8_RX) /*!< Remap USART8 Rx on DMA1 channel 1 */
+#endif /* !defined(STM32F030xC) */
+
+/* DMA1 - Channel 2 */
+#define HAL_DMA1_CH2_DEFAULT (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_DEFAULT) /*!< Default remap position for DMA1 */
+#define HAL_DMA1_CH2_ADC (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_ADC) /*!< Remap ADC on DMA1 channel 2 */
+#define HAL_DMA1_CH2_I2C1_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_I2C1_TX) /*!< Remap I2C1 Tx on DMA1 channel 2 */
+#define HAL_DMA1_CH2_SPI1_RX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_SPI1_RX) /*!< Remap SPI1 Rx on DMA1 channel 2 */
+#define HAL_DMA1_CH2_TIM1_CH1 (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_TIM1_CH1) /*!< Remap TIM1 channel 1 on DMA1 channel 2 */
+#define HAL_DMA1_CH2_TIM17_CH1 (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_TIM17_CH1) /*!< Remap TIM17 channel 1 on DMA1 channel 2 */
+#define HAL_DMA1_CH2_TIM17_UP (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_TIM17_UP) /*!< Remap TIM17 up on DMA1 channel 2 */
+#define HAL_DMA1_CH2_USART1_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART1_TX) /*!< Remap USART1 Tx on DMA1 channel 2 */
+#define HAL_DMA1_CH2_USART2_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART2_TX) /*!< Remap USART2 Tx on DMA1 channel 2 */
+#define HAL_DMA1_CH2_USART3_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART3_TX) /*!< Remap USART3 Tx on DMA1 channel 2 */
+#define HAL_DMA1_CH2_USART4_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART4_TX) /*!< Remap USART4 Tx on DMA1 channel 2 */
+#define HAL_DMA1_CH2_USART5_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART5_TX) /*!< Remap USART5 Tx on DMA1 channel 2 */
+#define HAL_DMA1_CH2_USART6_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART6_TX) /*!< Remap USART6 Tx on DMA1 channel 2 */
+#if !defined(STM32F030xC)
+#define HAL_DMA1_CH2_USART7_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART7_TX) /*!< Remap USART7 Tx on DMA1 channel 2 */
+#define HAL_DMA1_CH2_USART8_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART8_TX) /*!< Remap USART8 Tx on DMA1 channel 2 */
+#endif /* !defined(STM32F030xC) */
+
+/* DMA1 - Channel 3 */
+#define HAL_DMA1_CH3_DEFAULT (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_DEFAULT) /*!< Default remap position for DMA1 */
+#define HAL_DMA1_CH3_TIM6_UP (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_TIM6_UP) /*!< Remap TIM6 up on DMA1 channel 3 */
+#if !defined(STM32F030xC)
+#define HAL_DMA1_CH3_DAC_CH1 (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_DAC_CH1) /*!< Remap DAC Channel 1on DMA1 channel 3 */
+#endif /* !defined(STM32F030xC) */
+#define HAL_DMA1_CH3_I2C1_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_I2C1_RX) /*!< Remap I2C1 Rx on DMA1 channel 3 */
+#define HAL_DMA1_CH3_SPI1_TX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_SPI1_TX) /*!< Remap SPI1 Tx on DMA1 channel 3 */
+#define HAL_DMA1_CH3_TIM1_CH2 (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_TIM1_CH2) /*!< Remap TIM1 channel 2 on DMA1 channel 3 */
+#if !defined(STM32F030xC)
+#define HAL_DMA1_CH3_TIM2_CH2 (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_TIM2_CH2) /*!< Remap TIM2 channel 2 on DMA1 channel 3 */
+#endif /* !defined(STM32F030xC) */
+#define HAL_DMA1_CH3_TIM16_CH1 (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_TIM16_CH1) /*!< Remap TIM16 channel 1 on DMA1 channel 3 */
+#define HAL_DMA1_CH3_TIM16_UP (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_TIM16_UP) /*!< Remap TIM16 up on DMA1 channel 3 */
+#define HAL_DMA1_CH3_USART1_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART1_RX) /*!< Remap USART1 Rx on DMA1 channel 3 */
+#define HAL_DMA1_CH3_USART2_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART2_RX) /*!< Remap USART2 Rx on DMA1 channel 3 */
+#define HAL_DMA1_CH3_USART3_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART3_RX) /*!< Remap USART3 Rx on DMA1 channel 3 */
+#define HAL_DMA1_CH3_USART4_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART4_RX) /*!< Remap USART4 Rx on DMA1 channel 3 */
+#define HAL_DMA1_CH3_USART5_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART5_RX) /*!< Remap USART5 Rx on DMA1 channel 3 */
+#define HAL_DMA1_CH3_USART6_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART6_RX) /*!< Remap USART6 Rx on DMA1 channel 3 */
+#if !defined(STM32F030xC)
+#define HAL_DMA1_CH3_USART7_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART7_RX) /*!< Remap USART7 Rx on DMA1 channel 3 */
+#define HAL_DMA1_CH3_USART8_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART8_RX) /*!< Remap USART8 Rx on DMA1 channel 3 */
+#endif /* !defined(STM32F030xC) */
+
+/* DMA1 - Channel 4 */
+#define HAL_DMA1_CH4_DEFAULT (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_DEFAULT) /*!< Default remap position for DMA1 */
+#define HAL_DMA1_CH4_TIM7_UP (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_TIM7_UP) /*!< Remap TIM7 up on DMA1 channel 4 */
+#if !defined(STM32F030xC)
+#define HAL_DMA1_CH4_DAC_CH2 (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_DAC_CH2) /*!< Remap DAC Channel 2 on DMA1 channel 4 */
+#endif /* !defined(STM32F030xC) */
+#define HAL_DMA1_CH4_I2C2_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_I2C2_TX) /*!< Remap I2C2 Tx on DMA1 channel 4 */
+#define HAL_DMA1_CH4_SPI2_RX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_SPI2_RX) /*!< Remap SPI2 Rx on DMA1 channel 4 */
+#if !defined(STM32F030xC)
+#define HAL_DMA1_CH4_TIM2_CH4 (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_TIM2_CH4) /*!< Remap TIM2 channel 4 on DMA1 channel 4 */
+#endif /* !defined(STM32F030xC) */
+#define HAL_DMA1_CH4_TIM3_CH1 (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_TIM3_CH1) /*!< Remap TIM3 channel 1 on DMA1 channel 4 */
+#define HAL_DMA1_CH4_TIM3_TRIG (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_TIM3_TRIG) /*!< Remap TIM3 Trig on DMA1 channel 4 */
+#define HAL_DMA1_CH4_TIM16_CH1 (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_TIM16_CH1) /*!< Remap TIM16 channel 1 on DMA1 channel 4 */
+#define HAL_DMA1_CH4_TIM16_UP (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_TIM16_UP) /*!< Remap TIM16 up on DMA1 channel 4 */
+#define HAL_DMA1_CH4_USART1_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART1_TX) /*!< Remap USART1 Tx on DMA1 channel 4 */
+#define HAL_DMA1_CH4_USART2_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART2_TX) /*!< Remap USART2 Tx on DMA1 channel 4 */
+#define HAL_DMA1_CH4_USART3_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART3_TX) /*!< Remap USART3 Tx on DMA1 channel 4 */
+#define HAL_DMA1_CH4_USART4_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART4_TX) /*!< Remap USART4 Tx on DMA1 channel 4 */
+#define HAL_DMA1_CH4_USART5_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART5_TX) /*!< Remap USART5 Tx on DMA1 channel 4 */
+#define HAL_DMA1_CH4_USART6_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART6_TX) /*!< Remap USART6 Tx on DMA1 channel 4 */
+#if !defined(STM32F030xC)
+#define HAL_DMA1_CH4_USART7_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART7_TX) /*!< Remap USART7 Tx on DMA1 channel 4 */
+#define HAL_DMA1_CH4_USART8_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART8_TX) /*!< Remap USART8 Tx on DMA1 channel 4 */
+#endif /* !defined(STM32F030xC) */
+
+/* DMA1 - Channel 5 */
+#define HAL_DMA1_CH5_DEFAULT (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_DEFAULT) /*!< Default remap position for DMA1 */
+#define HAL_DMA1_CH5_I2C2_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_I2C2_RX) /*!< Remap I2C2 Rx on DMA1 channel 5 */
+#define HAL_DMA1_CH5_SPI2_TX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_SPI2_TX) /*!< Remap SPI1 Tx on DMA1 channel 5 */
+#define HAL_DMA1_CH5_TIM1_CH3 (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_TIM1_CH3) /*!< Remap TIM1 channel 3 on DMA1 channel 5 */
+#define HAL_DMA1_CH5_USART1_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART1_RX) /*!< Remap USART1 Rx on DMA1 channel 5 */
+#define HAL_DMA1_CH5_USART2_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART2_RX) /*!< Remap USART2 Rx on DMA1 channel 5 */
+#define HAL_DMA1_CH5_USART3_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART3_RX) /*!< Remap USART3 Rx on DMA1 channel 5 */
+#define HAL_DMA1_CH5_USART4_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART4_RX) /*!< Remap USART4 Rx on DMA1 channel 5 */
+#define HAL_DMA1_CH5_USART5_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART5_RX) /*!< Remap USART5 Rx on DMA1 channel 5 */
+#define HAL_DMA1_CH5_USART6_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART6_RX) /*!< Remap USART6 Rx on DMA1 channel 5 */
+#if !defined(STM32F030xC)
+#define HAL_DMA1_CH5_USART7_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART7_RX) /*!< Remap USART7 Rx on DMA1 channel 5 */
+#define HAL_DMA1_CH5_USART8_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART8_RX) /*!< Remap USART8 Rx on DMA1 channel 5 */
+#endif /* !defined(STM32F030xC) */
+
+#if !defined(STM32F030xC)
+/* DMA1 - Channel 6 */
+#define HAL_DMA1_CH6_DEFAULT (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_DEFAULT) /*!< Default remap position for DMA1 */
+#define HAL_DMA1_CH6_I2C1_TX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_I2C1_TX) /*!< Remap I2C1 Tx on DMA1 channel 6 */
+#define HAL_DMA1_CH6_SPI2_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_SPI2_RX) /*!< Remap SPI2 Rx on DMA1 channel 6 */
+#define HAL_DMA1_CH6_TIM1_CH1 (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_TIM1_CH1) /*!< Remap TIM1 channel 1 on DMA1 channel 6 */
+#define HAL_DMA1_CH6_TIM1_CH2 (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_TIM1_CH2) /*!< Remap TIM1 channel 2 on DMA1 channel 6 */
+#define HAL_DMA1_CH6_TIM1_CH3 (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_TIM1_CH3) /*!< Remap TIM1 channel 3 on DMA1 channel 6 */
+#define HAL_DMA1_CH6_TIM3_CH1 (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_TIM3_CH1) /*!< Remap TIM3 channel 1 on DMA1 channel 6 */
+#define HAL_DMA1_CH6_TIM3_TRIG (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_TIM3_TRIG) /*!< Remap TIM3 Trig on DMA1 channel 6 */
+#define HAL_DMA1_CH6_TIM16_CH1 (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_TIM16_CH1) /*!< Remap TIM16 channel 1 on DMA1 channel 6 */
+#define HAL_DMA1_CH6_TIM16_UP (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_TIM16_UP) /*!< Remap TIM16 up on DMA1 channel 6 */
+#define HAL_DMA1_CH6_USART1_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART1_RX) /*!< Remap USART1 Rx on DMA1 channel 6 */
+#define HAL_DMA1_CH6_USART2_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART2_RX) /*!< Remap USART2 Rx on DMA1 channel 6 */
+#define HAL_DMA1_CH6_USART3_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART3_RX) /*!< Remap USART3 Rx on DMA1 channel 6 */
+#define HAL_DMA1_CH6_USART4_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART4_RX) /*!< Remap USART4 Rx on DMA1 channel 6 */
+#define HAL_DMA1_CH6_USART5_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART5_RX) /*!< Remap USART5 Rx on DMA1 channel 6 */
+#define HAL_DMA1_CH6_USART6_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART6_RX) /*!< Remap USART6 Rx on DMA1 channel 6 */
+#define HAL_DMA1_CH6_USART7_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART7_RX) /*!< Remap USART7 Rx on DMA1 channel 6 */
+#define HAL_DMA1_CH6_USART8_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART8_RX) /*!< Remap USART8 Rx on DMA1 channel 6 */
+/* DMA1 - Channel 7 */
+#define HAL_DMA1_CH7_DEFAULT (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_DEFAULT) /*!< Default remap position for DMA1 */
+#define HAL_DMA1_CH7_I2C1_RX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_I2C1_RX) /*!< Remap I2C1 Rx on DMA1 channel 7 */
+#define HAL_DMA1_CH7_SPI2_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_SPI2_TX) /*!< Remap SPI2 Tx on DMA1 channel 7 */
+#define HAL_DMA1_CH7_TIM2_CH2 (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_TIM2_CH2) /*!< Remap TIM2 channel 2 on DMA1 channel 7 */
+#define HAL_DMA1_CH7_TIM2_CH4 (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_TIM2_CH4) /*!< Remap TIM2 channel 4 on DMA1 channel 7 */
+#define HAL_DMA1_CH7_TIM17_CH1 (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_TIM17_CH1) /*!< Remap TIM17 channel 1 on DMA1 channel 7 */
+#define HAL_DMA1_CH7_TIM17_UP (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_TIM17_UP) /*!< Remap TIM17 up on DMA1 channel 7 */
+#define HAL_DMA1_CH7_USART1_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART1_TX) /*!< Remap USART1 Tx on DMA1 channel 7 */
+#define HAL_DMA1_CH7_USART2_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART2_TX) /*!< Remap USART2 Tx on DMA1 channel 7 */
+#define HAL_DMA1_CH7_USART3_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART3_TX) /*!< Remap USART3 Tx on DMA1 channel 7 */
+#define HAL_DMA1_CH7_USART4_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART4_TX) /*!< Remap USART4 Tx on DMA1 channel 7 */
+#define HAL_DMA1_CH7_USART5_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART5_TX) /*!< Remap USART5 Tx on DMA1 channel 7 */
+#define HAL_DMA1_CH7_USART6_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART6_TX) /*!< Remap USART6 Tx on DMA1 channel 7 */
+#define HAL_DMA1_CH7_USART7_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART7_TX) /*!< Remap USART7 Tx on DMA1 channel 7 */
+#define HAL_DMA1_CH7_USART8_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART8_TX) /*!< Remap USART8 Tx on DMA1 channel 7 */
+
+/****************** DMA2 remap bit field definition********************/
+/* DMA2 - Channel 1 */
+#define HAL_DMA2_CH1_DEFAULT (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_DEFAULT) /*!< Default remap position for DMA2 */
+#define HAL_DMA2_CH1_I2C2_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_I2C2_TX) /*!< Remap I2C2 TX on DMA2 channel 1 */
+#define HAL_DMA2_CH1_USART1_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART1_TX) /*!< Remap USART1 Tx on DMA2 channel 1 */
+#define HAL_DMA2_CH1_USART2_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART2_TX) /*!< Remap USART2 Tx on DMA2 channel 1 */
+#define HAL_DMA2_CH1_USART3_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART3_TX) /*!< Remap USART3 Tx on DMA2 channel 1 */
+#define HAL_DMA2_CH1_USART4_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART4_TX) /*!< Remap USART4 Tx on DMA2 channel 1 */
+#define HAL_DMA2_CH1_USART5_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART5_TX) /*!< Remap USART5 Tx on DMA2 channel 1 */
+#define HAL_DMA2_CH1_USART6_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART6_TX) /*!< Remap USART6 Tx on DMA2 channel 1 */
+#define HAL_DMA2_CH1_USART7_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART7_TX) /*!< Remap USART7 Tx on DMA2 channel 1 */
+#define HAL_DMA2_CH1_USART8_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART8_TX) /*!< Remap USART8 Tx on DMA2 channel 1 */
+/* DMA2 - Channel 2 */
+#define HAL_DMA2_CH2_DEFAULT (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_DEFAULT) /*!< Default remap position for DMA2 */
+#define HAL_DMA2_CH2_I2C2_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_I2C2_RX) /*!< Remap I2C2 Rx on DMA2 channel 2 */
+#define HAL_DMA2_CH2_USART1_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART1_RX) /*!< Remap USART1 Rx on DMA2 channel 2 */
+#define HAL_DMA2_CH2_USART2_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART2_RX) /*!< Remap USART2 Rx on DMA2 channel 2 */
+#define HAL_DMA2_CH2_USART3_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART3_RX) /*!< Remap USART3 Rx on DMA2 channel 2 */
+#define HAL_DMA2_CH2_USART4_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART4_RX) /*!< Remap USART4 Rx on DMA2 channel 2 */
+#define HAL_DMA2_CH2_USART5_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART5_RX) /*!< Remap USART5 Rx on DMA2 channel 2 */
+#define HAL_DMA2_CH2_USART6_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART6_RX) /*!< Remap USART6 Rx on DMA2 channel 2 */
+#define HAL_DMA2_CH2_USART7_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART7_RX) /*!< Remap USART7 Rx on DMA2 channel 2 */
+#define HAL_DMA2_CH2_USART8_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART8_RX) /*!< Remap USART8 Rx on DMA2 channel 2 */
+/* DMA2 - Channel 3 */
+#define HAL_DMA2_CH3_DEFAULT (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_DEFAULT) /*!< Default remap position for DMA2 */
+#define HAL_DMA2_CH3_TIM6_UP (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_TIM6_UP) /*!< Remap TIM6 up on DMA2 channel 3 */
+#define HAL_DMA2_CH3_DAC_CH1 (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_DAC_CH1) /*!< Remap DAC channel 1 on DMA2 channel 3 */
+#define HAL_DMA2_CH3_SPI1_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_SPI1_RX) /*!< Remap SPI1 Rx on DMA2 channel 3 */
+#define HAL_DMA2_CH3_USART1_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART1_RX) /*!< Remap USART1 Rx on DMA2 channel 3 */
+#define HAL_DMA2_CH3_USART2_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART2_RX) /*!< Remap USART2 Rx on DMA2 channel 3 */
+#define HAL_DMA2_CH3_USART3_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART3_RX) /*!< Remap USART3 Rx on DMA2 channel 3 */
+#define HAL_DMA2_CH3_USART4_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART4_RX) /*!< Remap USART4 Rx on DMA2 channel 3 */
+#define HAL_DMA2_CH3_USART5_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART5_RX) /*!< Remap USART5 Rx on DMA2 channel 3 */
+#define HAL_DMA2_CH3_USART6_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART6_RX) /*!< Remap USART6 Rx on DMA2 channel 3 */
+#define HAL_DMA2_CH3_USART7_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART7_RX) /*!< Remap USART7 Rx on DMA2 channel 3 */
+#define HAL_DMA2_CH3_USART8_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART8_RX) /*!< Remap USART8 Rx on DMA2 channel 3 */
+/* DMA2 - Channel 4 */
+#define HAL_DMA2_CH4_DEFAULT (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_DEFAULT) /*!< Default remap position for DMA2 */
+#define HAL_DMA2_CH4_TIM7_UP (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_TIM7_UP) /*!< Remap TIM7 up on DMA2 channel 4 */
+#define HAL_DMA2_CH4_DAC_CH2 (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_DAC_CH2) /*!< Remap DAC channel 2 on DMA2 channel 4 */
+#define HAL_DMA2_CH4_SPI1_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_SPI1_TX) /*!< Remap SPI1 Tx on DMA2 channel 4 */
+#define HAL_DMA2_CH4_USART1_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART1_TX) /*!< Remap USART1 Tx on DMA2 channel 4 */
+#define HAL_DMA2_CH4_USART2_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART2_TX) /*!< Remap USART2 Tx on DMA2 channel 4 */
+#define HAL_DMA2_CH4_USART3_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART3_TX) /*!< Remap USART3 Tx on DMA2 channel 4 */
+#define HAL_DMA2_CH4_USART4_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART4_TX) /*!< Remap USART4 Tx on DMA2 channel 4 */
+#define HAL_DMA2_CH4_USART5_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART5_TX) /*!< Remap USART5 Tx on DMA2 channel 4 */
+#define HAL_DMA2_CH4_USART6_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART6_TX) /*!< Remap USART6 Tx on DMA2 channel 4 */
+#define HAL_DMA2_CH4_USART7_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART7_TX) /*!< Remap USART7 Tx on DMA2 channel 4 */
+#define HAL_DMA2_CH4_USART8_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART8_TX) /*!< Remap USART8 Tx on DMA2 channel 4 */
+/* DMA2 - Channel 5 */
+#define HAL_DMA2_CH5_DEFAULT (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_DEFAULT) /*!< Default remap position for DMA2 */
+#define HAL_DMA2_CH5_ADC (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_ADC) /*!< Remap ADC on DMA2 channel 5 */
+#define HAL_DMA2_CH5_USART1_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART1_TX) /*!< Remap USART1 Tx on DMA2 channel 5 */
+#define HAL_DMA2_CH5_USART2_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART2_TX) /*!< Remap USART2 Tx on DMA2 channel 5 */
+#define HAL_DMA2_CH5_USART3_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART3_TX) /*!< Remap USART3 Tx on DMA2 channel 5 */
+#define HAL_DMA2_CH5_USART4_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART4_TX) /*!< Remap USART4 Tx on DMA2 channel 5 */
+#define HAL_DMA2_CH5_USART5_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART5_TX) /*!< Remap USART5 Tx on DMA2 channel 5 */
+#define HAL_DMA2_CH5_USART6_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART6_TX) /*!< Remap USART6 Tx on DMA2 channel 5 */
+#define HAL_DMA2_CH5_USART7_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART7_TX) /*!< Remap USART7 Tx on DMA2 channel 5 */
+#define HAL_DMA2_CH5_USART8_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART8_TX) /*!< Remap USART8 Tx on DMA2 channel 5 */
+#endif /* !defined(STM32F030xC) */
+
+#if defined(STM32F091xC) || defined(STM32F098xx)
+#define IS_HAL_DMA1_REMAP(REQUEST) (((REQUEST) == HAL_DMA1_CH1_DEFAULT) ||\
+ ((REQUEST) == HAL_DMA1_CH1_ADC) ||\
+ ((REQUEST) == HAL_DMA1_CH1_TIM17_CH1) ||\
+ ((REQUEST) == HAL_DMA1_CH1_TIM17_UP) ||\
+ ((REQUEST) == HAL_DMA1_CH1_USART1_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH1_USART2_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH1_USART3_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH1_USART4_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH1_USART5_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH1_USART6_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH1_USART7_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH1_USART8_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_DEFAULT) ||\
+ ((REQUEST) == HAL_DMA1_CH2_ADC) ||\
+ ((REQUEST) == HAL_DMA1_CH2_I2C1_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_SPI1_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_TIM1_CH1) ||\
+ ((REQUEST) == HAL_DMA1_CH2_I2C1_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_TIM17_CH1) ||\
+ ((REQUEST) == HAL_DMA1_CH2_TIM17_UP) ||\
+ ((REQUEST) == HAL_DMA1_CH2_USART1_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_USART2_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_USART3_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_USART4_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_USART5_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_USART6_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_USART7_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_USART8_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH3_DEFAULT) ||\
+ ((REQUEST) == HAL_DMA1_CH3_TIM6_UP) ||\
+ ((REQUEST) == HAL_DMA1_CH3_DAC_CH1) ||\
+ ((REQUEST) == HAL_DMA1_CH3_I2C1_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH3_SPI1_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH3_TIM1_CH2) ||\
+ ((REQUEST) == HAL_DMA1_CH3_TIM2_CH2) ||\
+ ((REQUEST) == HAL_DMA1_CH3_TIM16_CH1) ||\
+ ((REQUEST) == HAL_DMA1_CH3_TIM16_UP) ||\
+ ((REQUEST) == HAL_DMA1_CH3_USART1_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH3_USART2_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH3_USART3_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH3_USART4_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH3_USART5_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH3_USART6_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH3_USART7_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH3_USART8_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH4_DEFAULT) ||\
+ ((REQUEST) == HAL_DMA1_CH4_TIM7_UP) ||\
+ ((REQUEST) == HAL_DMA1_CH4_DAC_CH2) ||\
+ ((REQUEST) == HAL_DMA1_CH4_I2C2_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH4_SPI2_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH4_TIM2_CH4) ||\
+ ((REQUEST) == HAL_DMA1_CH4_TIM3_CH1) ||\
+ ((REQUEST) == HAL_DMA1_CH4_TIM3_TRIG) ||\
+ ((REQUEST) == HAL_DMA1_CH4_TIM16_CH1) ||\
+ ((REQUEST) == HAL_DMA1_CH4_TIM16_UP) ||\
+ ((REQUEST) == HAL_DMA1_CH4_USART1_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH4_USART2_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH4_USART3_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH4_USART4_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH4_USART5_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH4_USART6_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH4_USART7_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH4_USART8_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH5_DEFAULT) ||\
+ ((REQUEST) == HAL_DMA1_CH5_I2C2_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH5_SPI2_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH5_TIM1_CH3) ||\
+ ((REQUEST) == HAL_DMA1_CH5_USART1_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH5_USART2_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH5_USART3_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH5_USART4_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH5_USART5_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH5_USART6_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH5_USART7_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH5_USART8_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH6_DEFAULT) ||\
+ ((REQUEST) == HAL_DMA1_CH6_I2C1_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH6_SPI2_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH6_TIM1_CH1) ||\
+ ((REQUEST) == HAL_DMA1_CH6_TIM1_CH2) ||\
+ ((REQUEST) == HAL_DMA1_CH6_TIM1_CH3) ||\
+ ((REQUEST) == HAL_DMA1_CH6_TIM3_CH1) ||\
+ ((REQUEST) == HAL_DMA1_CH6_TIM3_TRIG) ||\
+ ((REQUEST) == HAL_DMA1_CH6_TIM16_CH1) ||\
+ ((REQUEST) == HAL_DMA1_CH6_TIM16_UP) ||\
+ ((REQUEST) == HAL_DMA1_CH6_USART1_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH6_USART2_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH6_USART3_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH6_USART4_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH6_USART5_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH6_USART6_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH6_USART7_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH6_USART8_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH7_DEFAULT) ||\
+ ((REQUEST) == HAL_DMA1_CH7_I2C1_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH7_SPI2_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH7_TIM2_CH2) ||\
+ ((REQUEST) == HAL_DMA1_CH7_TIM2_CH4) ||\
+ ((REQUEST) == HAL_DMA1_CH7_TIM17_CH1) ||\
+ ((REQUEST) == HAL_DMA1_CH7_TIM17_UP) ||\
+ ((REQUEST) == HAL_DMA1_CH7_USART1_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH7_USART2_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH7_USART3_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH7_USART4_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH7_USART5_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH7_USART6_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH7_USART7_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH7_USART8_TX))
+
+#define IS_HAL_DMA2_REMAP(REQUEST) (((REQUEST) == HAL_DMA2_CH1_DEFAULT) ||\
+ ((REQUEST) == HAL_DMA2_CH1_I2C2_TX) ||\
+ ((REQUEST) == HAL_DMA2_CH1_USART1_TX) ||\
+ ((REQUEST) == HAL_DMA2_CH1_USART2_TX) ||\
+ ((REQUEST) == HAL_DMA2_CH1_USART3_TX) ||\
+ ((REQUEST) == HAL_DMA2_CH1_USART4_TX) ||\
+ ((REQUEST) == HAL_DMA2_CH1_USART5_TX) ||\
+ ((REQUEST) == HAL_DMA2_CH1_USART6_TX) ||\
+ ((REQUEST) == HAL_DMA2_CH1_USART7_TX) ||\
+ ((REQUEST) == HAL_DMA2_CH1_USART8_TX) ||\
+ ((REQUEST) == HAL_DMA2_CH2_DEFAULT) ||\
+ ((REQUEST) == HAL_DMA2_CH2_I2C2_RX) ||\
+ ((REQUEST) == HAL_DMA2_CH2_USART1_RX) ||\
+ ((REQUEST) == HAL_DMA2_CH2_USART2_RX) ||\
+ ((REQUEST) == HAL_DMA2_CH2_USART3_RX) ||\
+ ((REQUEST) == HAL_DMA2_CH2_USART4_RX) ||\
+ ((REQUEST) == HAL_DMA2_CH2_USART5_RX) ||\
+ ((REQUEST) == HAL_DMA2_CH2_USART6_RX) ||\
+ ((REQUEST) == HAL_DMA2_CH2_USART7_RX) ||\
+ ((REQUEST) == HAL_DMA2_CH2_USART8_RX) ||\
+ ((REQUEST) == HAL_DMA2_CH3_DEFAULT) ||\
+ ((REQUEST) == HAL_DMA2_CH3_TIM6_UP) ||\
+ ((REQUEST) == HAL_DMA2_CH3_DAC_CH1) ||\
+ ((REQUEST) == HAL_DMA2_CH3_SPI1_RX) ||\
+ ((REQUEST) == HAL_DMA2_CH3_USART1_RX) ||\
+ ((REQUEST) == HAL_DMA2_CH3_USART2_RX) ||\
+ ((REQUEST) == HAL_DMA2_CH3_USART3_RX) ||\
+ ((REQUEST) == HAL_DMA2_CH3_USART4_RX) ||\
+ ((REQUEST) == HAL_DMA2_CH3_USART5_RX) ||\
+ ((REQUEST) == HAL_DMA2_CH3_USART6_RX) ||\
+ ((REQUEST) == HAL_DMA2_CH3_USART7_RX) ||\
+ ((REQUEST) == HAL_DMA2_CH3_USART8_RX) ||\
+ ((REQUEST) == HAL_DMA2_CH4_DEFAULT) ||\
+ ((REQUEST) == HAL_DMA2_CH4_TIM7_UP) ||\
+ ((REQUEST) == HAL_DMA2_CH4_DAC_CH2) ||\
+ ((REQUEST) == HAL_DMA2_CH4_SPI1_TX) ||\
+ ((REQUEST) == HAL_DMA2_CH4_USART1_TX) ||\
+ ((REQUEST) == HAL_DMA2_CH4_USART2_TX) ||\
+ ((REQUEST) == HAL_DMA2_CH4_USART3_TX) ||\
+ ((REQUEST) == HAL_DMA2_CH4_USART4_TX) ||\
+ ((REQUEST) == HAL_DMA2_CH4_USART5_TX) ||\
+ ((REQUEST) == HAL_DMA2_CH4_USART6_TX) ||\
+ ((REQUEST) == HAL_DMA2_CH4_USART7_TX) ||\
+ ((REQUEST) == HAL_DMA2_CH4_USART8_TX) ||\
+ ((REQUEST) == HAL_DMA2_CH5_DEFAULT) ||\
+ ((REQUEST) == HAL_DMA2_CH5_ADC) ||\
+ ((REQUEST) == HAL_DMA2_CH5_USART1_TX) ||\
+ ((REQUEST) == HAL_DMA2_CH5_USART2_TX) ||\
+ ((REQUEST) == HAL_DMA2_CH5_USART3_TX) ||\
+ ((REQUEST) == HAL_DMA2_CH5_USART4_TX) ||\
+ ((REQUEST) == HAL_DMA2_CH5_USART5_TX) ||\
+ ((REQUEST) == HAL_DMA2_CH5_USART6_TX) ||\
+ ((REQUEST) == HAL_DMA2_CH5_USART7_TX) ||\
+ ((REQUEST) == HAL_DMA2_CH5_USART8_TX ))
+#endif /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F030xC)
+#define IS_HAL_DMA1_REMAP(REQUEST) (((REQUEST) == HAL_DMA1_CH1_DEFAULT) ||\
+ ((REQUEST) == HAL_DMA1_CH1_ADC) ||\
+ ((REQUEST) == HAL_DMA1_CH1_TIM17_CH1) ||\
+ ((REQUEST) == HAL_DMA1_CH1_TIM17_UP) ||\
+ ((REQUEST) == HAL_DMA1_CH1_USART1_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH1_USART2_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH1_USART3_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH1_USART4_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH1_USART5_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH1_USART6_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_DEFAULT) ||\
+ ((REQUEST) == HAL_DMA1_CH2_ADC) ||\
+ ((REQUEST) == HAL_DMA1_CH2_I2C1_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_SPI1_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_TIM1_CH1) ||\
+ ((REQUEST) == HAL_DMA1_CH2_I2C1_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_TIM17_CH1) ||\
+ ((REQUEST) == HAL_DMA1_CH2_TIM17_UP) ||\
+ ((REQUEST) == HAL_DMA1_CH2_USART1_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_USART2_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_USART3_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_USART4_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_USART5_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_USART6_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH3_DEFAULT) ||\
+ ((REQUEST) == HAL_DMA1_CH3_TIM6_UP) ||\
+ ((REQUEST) == HAL_DMA1_CH3_I2C1_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH3_SPI1_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH3_TIM1_CH2) ||\
+ ((REQUEST) == HAL_DMA1_CH3_TIM16_CH1) ||\
+ ((REQUEST) == HAL_DMA1_CH3_TIM16_UP) ||\
+ ((REQUEST) == HAL_DMA1_CH3_USART1_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH3_USART2_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH3_USART3_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH3_USART4_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH3_USART5_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH3_USART6_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH4_DEFAULT) ||\
+ ((REQUEST) == HAL_DMA1_CH4_TIM7_UP) ||\
+ ((REQUEST) == HAL_DMA1_CH4_I2C2_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH4_SPI2_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH4_TIM3_CH1) ||\
+ ((REQUEST) == HAL_DMA1_CH4_TIM3_TRIG) ||\
+ ((REQUEST) == HAL_DMA1_CH4_TIM16_CH1) ||\
+ ((REQUEST) == HAL_DMA1_CH4_TIM16_UP) ||\
+ ((REQUEST) == HAL_DMA1_CH4_USART1_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH4_USART2_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH4_USART3_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH4_USART4_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH4_USART5_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH4_USART6_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH5_DEFAULT) ||\
+ ((REQUEST) == HAL_DMA1_CH5_I2C2_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH5_SPI2_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH5_TIM1_CH3) ||\
+ ((REQUEST) == HAL_DMA1_CH5_USART1_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH5_USART2_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH5_USART3_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH5_USART4_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH5_USART5_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH5_USART6_RX))
+#endif /* STM32F030xC */
+
+/**
+ * @}
+ */
+#endif /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+/* Exported macros -----------------------------------------------------------*/
+
+/** @defgroup DMAEx_Exported_Macros DMAEx Exported Macros
+ * @{
+ */
+/* Interrupt & Flag management */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)
+/**
+ * @brief Returns the current DMA Channel transfer complete flag.
+ * @param __HANDLE__ DMA handle
+ * @retval The specified transfer complete flag index.
+ */
+#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TC1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TC2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TC3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TC4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TC5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TC6 :\
+ DMA_FLAG_TC7)
+
+/**
+ * @brief Returns the current DMA Channel half transfer complete flag.
+ * @param __HANDLE__ DMA handle
+ * @retval The specified half transfer complete flag index.
+ */
+#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_HT1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_HT2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_HT3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_HT4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_HT5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_HT6 :\
+ DMA_FLAG_HT7)
+
+/**
+ * @brief Returns the current DMA Channel transfer error flag.
+ * @param __HANDLE__ DMA handle
+ * @retval The specified transfer error flag index.
+ */
+#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TE1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TE2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TE3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TE4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TE5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TE6 :\
+ DMA_FLAG_TE7)
+
+/**
+ * @brief Return the current DMA Channel Global interrupt flag.
+ * @param __HANDLE__ DMA handle
+ * @retval The specified transfer error flag index.
+ */
+#define __HAL_DMA_GET_GI_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_GL1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_GL2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_GL3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_GL4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_GL5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_GL6 :\
+ DMA_FLAG_GL7)
+
+/**
+ * @brief Get the DMA Channel pending flags.
+ * @param __HANDLE__ DMA handle
+ * @param __FLAG__ Get the specified flag.
+ * This parameter can be any combination of the following values:
+ * @arg DMA_FLAG_TCx: Transfer complete flag
+ * @arg DMA_FLAG_HTx: Half transfer complete flag
+ * @arg DMA_FLAG_TEx: Transfer error flag
+ * Where x can be 1_7 to select the DMA Channel flag.
+ * @retval The state of FLAG (SET or RESET).
+ */
+
+#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__) (DMA1->ISR & (__FLAG__))
+
+/**
+ * @brief Clears the DMA Channel pending flags.
+ * @param __HANDLE__ DMA handle
+ * @param __FLAG__ specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg DMA_FLAG_TCx: Transfer complete flag
+ * @arg DMA_FLAG_HTx: Half transfer complete flag
+ * @arg DMA_FLAG_TEx: Transfer error flag
+ * Where x can be 1_7 to select the DMA Channel flag.
+ * @retval None
+ */
+#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) (DMA1->IFCR = (__FLAG__))
+
+#elif defined(STM32F091xC) || defined(STM32F098xx)
+/**
+ * @brief Returns the current DMA Channel transfer complete flag.
+ * @param __HANDLE__ DMA handle
+ * @retval The specified transfer complete flag index.
+ */
+#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TC1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TC2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TC3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TC4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TC5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TC6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel7))? DMA_FLAG_TC7 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_TC1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_TC2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_TC3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_TC4 :\
+ DMA_FLAG_TC5)
+
+/**
+ * @brief Returns the current DMA Channel half transfer complete flag.
+ * @param __HANDLE__ DMA handle
+ * @retval The specified half transfer complete flag index.
+ */
+#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_HT1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_HT2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_HT3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_HT4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_HT5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_HT6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel7))? DMA_FLAG_HT7 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_HT1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_HT2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_HT3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_HT4 :\
+ DMA_FLAG_HT5)
+
+/**
+ * @brief Returns the current DMA Channel transfer error flag.
+ * @param __HANDLE__ DMA handle
+ * @retval The specified transfer error flag index.
+ */
+#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TE1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TE2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TE3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TE4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TE5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TE6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel7))? DMA_FLAG_TE7 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_TE1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_TE2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_TE3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_TE4 :\
+ DMA_FLAG_TE5)
+
+/**
+ * @brief Return the current DMA Channel Global interrupt flag.
+ * @param __HANDLE__ DMA handle
+ * @retval The specified transfer error flag index.
+ */
+#define __HAL_DMA_GET_GI_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_GL1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_GL2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_GL3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_GL4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_GL5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_GL6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel7))? DMA_FLAG_GL7 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_GL1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_GL2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_GL3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_GL4 :\
+ DMA_FLAG_GL5)
+
+/**
+ * @brief Get the DMA Channel pending flags.
+ * @param __HANDLE__ DMA handle
+ * @param __FLAG__ Get the specified flag.
+ * This parameter can be any combination of the following values:
+ * @arg DMA_FLAG_TCx: Transfer complete flag
+ * @arg DMA_FLAG_HTx: Half transfer complete flag
+ * @arg DMA_FLAG_TEx: Transfer error flag
+ * Where x can be 0_4, 1_5, 2_6 or 3_7 to select the DMA Channel flag.
+ * @retval The state of FLAG (SET or RESET).
+ */
+
+#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__)\
+(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Channel7)? (DMA2->ISR & (__FLAG__)) :\
+ (DMA1->ISR & (__FLAG__)))
+
+/**
+ * @brief Clears the DMA Channel pending flags.
+ * @param __HANDLE__ DMA handle
+ * @param __FLAG__ specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg DMA_FLAG_TCx: Transfer complete flag
+ * @arg DMA_FLAG_HTx: Half transfer complete flag
+ * @arg DMA_FLAG_TEx: Transfer error flag
+ * Where x can be 0_4, 1_5, 2_6 or 3_7 to select the DMA Channel flag.
+ * @retval None
+ */
+#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) \
+(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Channel7)? (DMA2->IFCR = (__FLAG__)) :\
+ (DMA1->IFCR = (__FLAG__)))
+
+#else /* STM32F030x8_STM32F030xC_STM32F031x6_STM32F038xx_STM32F051x8_STM32F058xx_STM32F070x6_STM32F070xB Product devices */
+/**
+ * @brief Returns the current DMA Channel transfer complete flag.
+ * @param __HANDLE__ DMA handle
+ * @retval The specified transfer complete flag index.
+ */
+#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TC1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TC2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TC3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TC4 :\
+ DMA_FLAG_TC5)
+
+/**
+ * @brief Returns the current DMA Channel half transfer complete flag.
+ * @param __HANDLE__ DMA handle
+ * @retval The specified half transfer complete flag index.
+ */
+#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_HT1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_HT2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_HT3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_HT4 :\
+ DMA_FLAG_HT5)
+
+/**
+ * @brief Returns the current DMA Channel transfer error flag.
+ * @param __HANDLE__ DMA handle
+ * @retval The specified transfer error flag index.
+ */
+#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TE1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TE2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TE3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TE4 :\
+ DMA_FLAG_TE5)
+
+/**
+ * @brief Return the current DMA Channel Global interrupt flag.
+ * @param __HANDLE__ DMA handle
+ * @retval The specified transfer error flag index.
+ */
+#define __HAL_DMA_GET_GI_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_GL1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_GL2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_GL3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_GL4 :\
+ DMA_FLAG_GL5)
+
+/**
+ * @brief Get the DMA Channel pending flags.
+ * @param __HANDLE__ DMA handle
+ * @param __FLAG__ Get the specified flag.
+ * This parameter can be any combination of the following values:
+ * @arg DMA_FLAG_TCx: Transfer complete flag
+ * @arg DMA_FLAG_HTx: Half transfer complete flag
+ * @arg DMA_FLAG_TEx: Transfer error flag
+ * Where x can be 1_5 to select the DMA Channel flag.
+ * @retval The state of FLAG (SET or RESET).
+ */
+
+#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__) (DMA1->ISR & (__FLAG__))
+
+/**
+ * @brief Clears the DMA Channel pending flags.
+ * @param __HANDLE__ DMA handle
+ * @param __FLAG__ specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg DMA_FLAG_TCx: Transfer complete flag
+ * @arg DMA_FLAG_HTx: Half transfer complete flag
+ * @arg DMA_FLAG_TEx: Transfer error flag
+ * Where x can be 1_5 to select the DMA Channel flag.
+ * @retval None
+ */
+#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) (DMA1->IFCR = (__FLAG__))
+
+#endif
+
+
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+#define __HAL_DMA1_REMAP(__REQUEST__) \
+ do { assert_param(IS_HAL_DMA1_REMAP(__REQUEST__)); \
+ DMA1->CSELR &= ~(0x0FU << (uint32_t)(((__REQUEST__) >> 28U) * 4U)); \
+ DMA1->CSELR |= (uint32_t)((__REQUEST__) & 0x0FFFFFFFU); \
+ }while(0)
+
+#if defined(STM32F091xC) || defined(STM32F098xx)
+#define __HAL_DMA2_REMAP(__REQUEST__) \
+ do { assert_param(IS_HAL_DMA2_REMAP(__REQUEST__)); \
+ DMA2->CSELR &= ~(0x0FU << (uint32_t)(((__REQUEST__) >> 28U) * 4U)); \
+ DMA2->CSELR |= (uint32_t)((__REQUEST__) & 0x0FFFFFFFU); \
+ }while(0)
+#endif /* STM32F091xC || STM32F098xx */
+
+#endif /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_DMA_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h
new file mode 100644
index 0000000..6bfdc0a
--- /dev/null
+++ b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_exti.h
@@ -0,0 +1,375 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_exti.h
+ * @author MCD Application Team
+ * @brief Header file of EXTI HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32F0xx_HAL_EXTI_H
+#define STM32F0xx_HAL_EXTI_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup EXTI EXTI
+ * @brief EXTI HAL module driver
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup EXTI_Exported_Types EXTI Exported Types
+ * @{
+ */
+
+/**
+ * @brief HAL EXTI common Callback ID enumeration definition
+ */
+typedef enum
+{
+ HAL_EXTI_COMMON_CB_ID = 0x00U
+} EXTI_CallbackIDTypeDef;
+
+/**
+ * @brief EXTI Handle structure definition
+ */
+typedef struct
+{
+ uint32_t Line; /*!< Exti line number */
+ void (* PendingCallback)(void); /*!< Exti pending callback */
+} EXTI_HandleTypeDef;
+
+/**
+ * @brief EXTI Configuration structure definition
+ */
+typedef struct
+{
+ uint32_t Line; /*!< The Exti line to be configured. This parameter
+ can be a value of @ref EXTI_Line */
+ uint32_t Mode; /*!< The Exit Mode to be configured for a core.
+ This parameter can be a combination of @ref EXTI_Mode */
+ uint32_t Trigger; /*!< The Exti Trigger to be configured. This parameter
+ can be a value of @ref EXTI_Trigger */
+ uint32_t GPIOSel; /*!< The Exti GPIO multiplexer selection to be configured.
+ This parameter is only possible for line 0 to 15. It
+ can be a value of @ref EXTI_GPIOSel */
+} EXTI_ConfigTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup EXTI_Exported_Constants EXTI Exported Constants
+ * @{
+ */
+
+/** @defgroup EXTI_Line EXTI Line
+ * @{
+ */
+#define EXTI_LINE_0 (EXTI_GPIO | 0x00u) /*!< External interrupt line 0 */
+#define EXTI_LINE_1 (EXTI_GPIO | 0x01u) /*!< External interrupt line 1 */
+#define EXTI_LINE_2 (EXTI_GPIO | 0x02u) /*!< External interrupt line 2 */
+#define EXTI_LINE_3 (EXTI_GPIO | 0x03u) /*!< External interrupt line 3 */
+#define EXTI_LINE_4 (EXTI_GPIO | 0x04u) /*!< External interrupt line 4 */
+#define EXTI_LINE_5 (EXTI_GPIO | 0x05u) /*!< External interrupt line 5 */
+#define EXTI_LINE_6 (EXTI_GPIO | 0x06u) /*!< External interrupt line 6 */
+#define EXTI_LINE_7 (EXTI_GPIO | 0x07u) /*!< External interrupt line 7 */
+#define EXTI_LINE_8 (EXTI_GPIO | 0x08u) /*!< External interrupt line 8 */
+#define EXTI_LINE_9 (EXTI_GPIO | 0x09u) /*!< External interrupt line 9 */
+#define EXTI_LINE_10 (EXTI_GPIO | 0x0Au) /*!< External interrupt line 10 */
+#define EXTI_LINE_11 (EXTI_GPIO | 0x0Bu) /*!< External interrupt line 11 */
+#define EXTI_LINE_12 (EXTI_GPIO | 0x0Cu) /*!< External interrupt line 12 */
+#define EXTI_LINE_13 (EXTI_GPIO | 0x0Du) /*!< External interrupt line 13 */
+#define EXTI_LINE_14 (EXTI_GPIO | 0x0Eu) /*!< External interrupt line 14 */
+#define EXTI_LINE_15 (EXTI_GPIO | 0x0Fu) /*!< External interrupt line 15 */
+
+#if defined (EXTI_IMR_MR16)
+#define EXTI_LINE_16 (EXTI_CONFIG | 0x10u) /*!< External interrupt line 16 Connected to the PVD Output */
+#else
+#define EXTI_LINE_16 (EXTI_RESERVED | 0x10u)
+#endif /* EXTI_IMR_MR16 */
+
+#define EXTI_LINE_17 (EXTI_CONFIG | 0x11u) /*!< External interrupt line 17 Connected to the RTC Alarm event */
+
+#if defined (EXTI_IMR_MR18)
+#define EXTI_LINE_18 (EXTI_CONFIG | 0x12u) /*!< External interrupt line 18 Connected to the USB OTG FS Wakeup from suspend event */
+#else
+#define EXTI_LINE_18 (EXTI_RESERVED | 0x12u)
+#endif /* EXTI_IMR_MR18 */
+
+#define EXTI_LINE_19 (EXTI_CONFIG | 0x13u) /*!< External interrupt line 19 Connected to the Ethernet Wakeup event */
+
+#if defined (EXTI_IMR_MR20)
+#define EXTI_LINE_20 (EXTI_CONFIG | 0x14u) /*!< External interrupt line 20 Connected to the USB OTG HS (configured in FS) Wakeup event */
+#else
+#define EXTI_LINE_20 (EXTI_RESERVED | 0x14u)
+#endif /* EXTI_IMR_MR20 */
+
+#if defined (EXTI_IMR_MR21)
+#define EXTI_LINE_21 (EXTI_CONFIG | 0x15u) /*!< External interrupt line 21 Connected to the Comparator 1 output */
+#else
+#define EXTI_LINE_21 (EXTI_RESERVED | 0x15u)
+#endif /* EXTI_IMR_MR21 */
+
+#if defined (EXTI_IMR_MR22)
+#define EXTI_LINE_22 (EXTI_CONFIG | 0x16u) /*!< External interrupt line 22 Connected to the Comparator 2 output */
+#else
+#define EXTI_LINE_22 (EXTI_RESERVED | 0x16u)
+#endif /* EXTI_IMR_MR22 */
+
+#if defined (EXTI_IMR_MR23)
+#define EXTI_LINE_23 (EXTI_DIRECT | 0x17u) /*!< External interrupt line 23 Connected to the internal I2C1 wakeup event */
+#else
+#define EXTI_LINE_23 (EXTI_RESERVED | 0x17u)
+#endif /* EXTI_IMR_MR23 */
+
+#define EXTI_LINE_24 (EXTI_RESERVED | 0x18u)
+
+#if defined (EXTI_IMR_MR25)
+#define EXTI_LINE_25 (EXTI_CONFIG | 0x19u) /*!< External interrupt line 25 Connected to the internal USART1 wakeup event */
+#else
+#define EXTI_LINE_25 (EXTI_RESERVED | 0x19u)
+#endif /* EXTI_IMR_MR25 */
+
+#if defined (EXTI_IMR_MR26)
+#define EXTI_LINE_26 (EXTI_CONFIG | 0x1Au) /*!< External interrupt line 26 Connected to the internal USART2 wakeup event */
+#else
+#define EXTI_LINE_26 (EXTI_RESERVED | 0x1Au)
+#endif /* EXTI_IMR_MR26 */
+
+#if defined (EXTI_IMR_MR27)
+#define EXTI_LINE_27 (EXTI_CONFIG | 0x1Bu) /*!< External interrupt line 27 Connected to the internal CEC wakeup event */
+#else
+#define EXTI_LINE_27 (EXTI_RESERVED | 0x1Bu)
+#endif /* EXTI_IMR_MR27 */
+
+#if defined (EXTI_IMR_MR28)
+#define EXTI_LINE_28 (EXTI_CONFIG | 0x1Cu) /*!< External interrupt line 28 Connected to the internal USART3 wakeup event */
+#else
+#define EXTI_LINE_28 (EXTI_RESERVED | 0x1Cu)
+#endif /* EXTI_IMR_MR28 */
+
+#define EXTI_LINE_29 (EXTI_RESERVED | 0x1Du)
+#define EXTI_LINE_30 (EXTI_RESERVED | 0x1Eu)
+
+#if defined (EXTI_IMR_MR31)
+#define EXTI_LINE_31 (EXTI_CONFIG | 0x1Fu) /*!< External interrupt line 31 Connected to the VDDIO2 supply comparator output */
+#else
+#define EXTI_LINE_31 (EXTI_RESERVED | 0x1Fu)
+#endif /* EXTI_IMR_MR31 */
+
+/**
+ * @}
+ */
+
+/** @defgroup EXTI_Mode EXTI Mode
+ * @{
+ */
+#define EXTI_MODE_NONE 0x00000000u
+#define EXTI_MODE_INTERRUPT 0x00000001u
+#define EXTI_MODE_EVENT 0x00000002u
+/**
+ * @}
+ */
+
+/** @defgroup EXTI_Trigger EXTI Trigger
+ * @{
+ */
+#define EXTI_TRIGGER_NONE 0x00000000u
+#define EXTI_TRIGGER_RISING 0x00000001u
+#define EXTI_TRIGGER_FALLING 0x00000002u
+#define EXTI_TRIGGER_RISING_FALLING (EXTI_TRIGGER_RISING | EXTI_TRIGGER_FALLING)
+/**
+ * @}
+ */
+
+/** @defgroup EXTI_GPIOSel EXTI GPIOSel
+ * @brief
+ * @{
+ */
+#define EXTI_GPIOA 0x00000000u
+#define EXTI_GPIOB 0x00000001u
+#define EXTI_GPIOC 0x00000002u
+#if defined (GPIOD)
+#define EXTI_GPIOD 0x00000003u
+#endif /* GPIOD */
+#if defined (GPIOE)
+#define EXTI_GPIOE 0x00000004u
+#endif /* GPIOE */
+#define EXTI_GPIOF 0x00000005u
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup EXTI_Exported_Macros EXTI Exported Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private constants --------------------------------------------------------*/
+/** @defgroup EXTI_Private_Constants EXTI Private Constants
+ * @{
+ */
+/**
+ * @brief EXTI Line property definition
+ */
+#define EXTI_PROPERTY_SHIFT 24u
+#define EXTI_DIRECT (0x01uL << EXTI_PROPERTY_SHIFT)
+#define EXTI_CONFIG (0x02uL << EXTI_PROPERTY_SHIFT)
+#define EXTI_GPIO ((0x04uL << EXTI_PROPERTY_SHIFT) | EXTI_CONFIG)
+#define EXTI_RESERVED (0x08uL << EXTI_PROPERTY_SHIFT)
+#define EXTI_PROPERTY_MASK (EXTI_DIRECT | EXTI_CONFIG | EXTI_GPIO)
+
+/**
+ * @brief EXTI bit usage
+ */
+#define EXTI_PIN_MASK 0x0000001Fu
+
+/**
+ * @brief EXTI Mask for interrupt & event mode
+ */
+#define EXTI_MODE_MASK (EXTI_MODE_EVENT | EXTI_MODE_INTERRUPT)
+
+/**
+ * @brief EXTI Mask for trigger possibilities
+ */
+#define EXTI_TRIGGER_MASK (EXTI_TRIGGER_RISING | EXTI_TRIGGER_FALLING)
+
+/**
+ * @brief EXTI Line number
+ */
+#define EXTI_LINE_NB 32uL
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup EXTI_Private_Macros EXTI Private Macros
+ * @{
+ */
+#define IS_EXTI_LINE(__LINE__) ((((__LINE__) & ~(EXTI_PROPERTY_MASK | EXTI_PIN_MASK)) == 0x00u) && \
+ ((((__LINE__) & EXTI_PROPERTY_MASK) == EXTI_DIRECT) || \
+ (((__LINE__) & EXTI_PROPERTY_MASK) == EXTI_CONFIG) || \
+ (((__LINE__) & EXTI_PROPERTY_MASK) == EXTI_GPIO)) && \
+ (((__LINE__) & EXTI_PIN_MASK) < EXTI_LINE_NB))
+
+#define IS_EXTI_MODE(__LINE__) ((((__LINE__) & EXTI_MODE_MASK) != 0x00u) && \
+ (((__LINE__) & ~EXTI_MODE_MASK) == 0x00u))
+
+#define IS_EXTI_TRIGGER(__LINE__) (((__LINE__) & ~EXTI_TRIGGER_MASK) == 0x00u)
+
+#define IS_EXTI_PENDING_EDGE(__LINE__) ((__LINE__) == EXTI_TRIGGER_RISING_FALLING)
+
+#define IS_EXTI_CONFIG_LINE(__LINE__) (((__LINE__) & EXTI_CONFIG) != 0x00u)
+
+#if defined (GPIOE)
+#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \
+ ((__PORT__) == EXTI_GPIOB) || \
+ ((__PORT__) == EXTI_GPIOC) || \
+ ((__PORT__) == EXTI_GPIOD) || \
+ ((__PORT__) == EXTI_GPIOE) || \
+ ((__PORT__) == EXTI_GPIOF))
+#elif defined (GPIOD)
+#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \
+ ((__PORT__) == EXTI_GPIOB) || \
+ ((__PORT__) == EXTI_GPIOC) || \
+ ((__PORT__) == EXTI_GPIOD) || \
+ ((__PORT__) == EXTI_GPIOF))
+#else
+#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \
+ ((__PORT__) == EXTI_GPIOB) || \
+ ((__PORT__) == EXTI_GPIOC) || \
+ ((__PORT__) == EXTI_GPIOF))
+#endif /* GPIOE */
+
+#define IS_EXTI_GPIO_PIN(__PIN__) ((__PIN__) < 16u)
+
+/**
+ * @}
+ */
+
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup EXTI_Exported_Functions EXTI Exported Functions
+ * @brief EXTI Exported Functions
+ * @{
+ */
+
+/** @defgroup EXTI_Exported_Functions_Group1 Configuration functions
+ * @brief Configuration functions
+ * @{
+ */
+/* Configuration functions ****************************************************/
+HAL_StatusTypeDef HAL_EXTI_SetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig);
+HAL_StatusTypeDef HAL_EXTI_GetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig);
+HAL_StatusTypeDef HAL_EXTI_ClearConfigLine(EXTI_HandleTypeDef *hexti);
+HAL_StatusTypeDef HAL_EXTI_RegisterCallback(EXTI_HandleTypeDef *hexti, EXTI_CallbackIDTypeDef CallbackID, void (*pPendingCbfn)(void));
+HAL_StatusTypeDef HAL_EXTI_GetHandle(EXTI_HandleTypeDef *hexti, uint32_t ExtiLine);
+/**
+ * @}
+ */
+
+/** @defgroup EXTI_Exported_Functions_Group2 IO operation functions
+ * @brief IO operation functions
+ * @{
+ */
+/* IO operation functions *****************************************************/
+void HAL_EXTI_IRQHandler(EXTI_HandleTypeDef *hexti);
+uint32_t HAL_EXTI_GetPending(EXTI_HandleTypeDef *hexti, uint32_t Edge);
+void HAL_EXTI_ClearPending(EXTI_HandleTypeDef *hexti, uint32_t Edge);
+void HAL_EXTI_GenerateSWI(EXTI_HandleTypeDef *hexti);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32F0xx_HAL_EXTI_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h
new file mode 100644
index 0000000..ecce5da
--- /dev/null
+++ b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash.h
@@ -0,0 +1,353 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_flash.h
+ * @author MCD Application Team
+ * @brief Header file of Flash HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_FLASH_H
+#define __STM32F0xx_HAL_FLASH_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup FLASH
+ * @{
+ */
+
+/** @addtogroup FLASH_Private_Constants
+ * @{
+ */
+#define FLASH_TIMEOUT_VALUE (50000U) /* 50 s */
+/**
+ * @}
+ */
+
+/** @addtogroup FLASH_Private_Macros
+ * @{
+ */
+
+#define IS_FLASH_TYPEPROGRAM(VALUE) (((VALUE) == FLASH_TYPEPROGRAM_HALFWORD) || \
+ ((VALUE) == FLASH_TYPEPROGRAM_WORD) || \
+ ((VALUE) == FLASH_TYPEPROGRAM_DOUBLEWORD))
+
+#define IS_FLASH_LATENCY(__LATENCY__) (((__LATENCY__) == FLASH_LATENCY_0) || \
+ ((__LATENCY__) == FLASH_LATENCY_1))
+
+/**
+ * @}
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup FLASH_Exported_Types FLASH Exported Types
+ * @{
+ */
+
+/**
+ * @brief FLASH Procedure structure definition
+ */
+typedef enum
+{
+ FLASH_PROC_NONE = 0U,
+ FLASH_PROC_PAGEERASE = 1U,
+ FLASH_PROC_MASSERASE = 2U,
+ FLASH_PROC_PROGRAMHALFWORD = 3U,
+ FLASH_PROC_PROGRAMWORD = 4U,
+ FLASH_PROC_PROGRAMDOUBLEWORD = 5U
+} FLASH_ProcedureTypeDef;
+
+/**
+ * @brief FLASH handle Structure definition
+ */
+typedef struct
+{
+ __IO FLASH_ProcedureTypeDef ProcedureOnGoing; /*!< Internal variable to indicate which procedure is ongoing or not in IT context */
+
+ __IO uint32_t DataRemaining; /*!< Internal variable to save the remaining pages to erase or half-word to program in IT context */
+
+ __IO uint32_t Address; /*!< Internal variable to save address selected for program or erase */
+
+ __IO uint64_t Data; /*!< Internal variable to save data to be programmed */
+
+ HAL_LockTypeDef Lock; /*!< FLASH locking object */
+
+ __IO uint32_t ErrorCode; /*!< FLASH error code
+ This parameter can be a value of @ref FLASH_Error_Codes */
+} FLASH_ProcessTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup FLASH_Exported_Constants FLASH Exported Constants
+ * @{
+ */
+
+/** @defgroup FLASH_Error_Codes FLASH Error Codes
+ * @{
+ */
+
+#define HAL_FLASH_ERROR_NONE 0x00U /*!< No error */
+#define HAL_FLASH_ERROR_PROG 0x01U /*!< Programming error */
+#define HAL_FLASH_ERROR_WRP 0x02U /*!< Write protection error */
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Type_Program FLASH Type Program
+ * @{
+ */
+#define FLASH_TYPEPROGRAM_HALFWORD (0x01U) /*!<Program a half-word (16-bit) at a specified address.*/
+#define FLASH_TYPEPROGRAM_WORD (0x02U) /*!<Program a word (32-bit) at a specified address.*/
+#define FLASH_TYPEPROGRAM_DOUBLEWORD (0x03U) /*!<Program a double word (64-bit) at a specified address*/
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Latency FLASH Latency
+ * @{
+ */
+#define FLASH_LATENCY_0 (0x00000000U) /*!< FLASH Zero Latency cycle */
+#define FLASH_LATENCY_1 FLASH_ACR_LATENCY /*!< FLASH One Latency cycle */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup FLASH_Flag_definition FLASH Flag definition
+ * @{
+ */
+#define FLASH_FLAG_BSY FLASH_SR_BSY /*!< FLASH Busy flag */
+#define FLASH_FLAG_PGERR FLASH_SR_PGERR /*!< FLASH Programming error flag */
+#define FLASH_FLAG_WRPERR FLASH_SR_WRPERR /*!< FLASH Write protected error flag */
+#define FLASH_FLAG_EOP FLASH_SR_EOP /*!< FLASH End of Operation flag */
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Interrupt_definition FLASH Interrupt definition
+ * @{
+ */
+#define FLASH_IT_EOP FLASH_CR_EOPIE /*!< End of FLASH Operation Interrupt source */
+#define FLASH_IT_ERR FLASH_CR_ERRIE /*!< Error Interrupt source */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup FLASH_Exported_Macros FLASH Exported Macros
+ * @brief macros to control FLASH features
+ * @{
+ */
+
+
+/** @defgroup FLASH_EM_Latency FLASH Latency
+ * @brief macros to handle FLASH Latency
+ * @{
+ */
+
+/**
+ * @brief Set the FLASH Latency.
+ * @param __LATENCY__ FLASH Latency
+ * The value of this parameter depend on device used within the same series
+ * @retval None
+ */
+#define __HAL_FLASH_SET_LATENCY(__LATENCY__) (FLASH->ACR = (FLASH->ACR&(~FLASH_ACR_LATENCY)) | (__LATENCY__))
+
+
+/**
+ * @brief Get the FLASH Latency.
+ * @retval FLASH Latency
+ * The value of this parameter depend on device used within the same series
+ */
+#define __HAL_FLASH_GET_LATENCY() (READ_BIT((FLASH->ACR), FLASH_ACR_LATENCY))
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Prefetch FLASH Prefetch
+ * @brief macros to handle FLASH Prefetch buffer
+ * @{
+ */
+/**
+ * @brief Enable the FLASH prefetch buffer.
+ * @retval None
+ */
+#define __HAL_FLASH_PREFETCH_BUFFER_ENABLE() (FLASH->ACR |= FLASH_ACR_PRFTBE)
+
+/**
+ * @brief Disable the FLASH prefetch buffer.
+ * @retval None
+ */
+#define __HAL_FLASH_PREFETCH_BUFFER_DISABLE() (FLASH->ACR &= (~FLASH_ACR_PRFTBE))
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Interrupt FLASH Interrupts
+ * @brief macros to handle FLASH interrupts
+ * @{
+ */
+
+/**
+ * @brief Enable the specified FLASH interrupt.
+ * @param __INTERRUPT__ FLASH interrupt
+ * This parameter can be any combination of the following values:
+ * @arg @ref FLASH_IT_EOP End of FLASH Operation Interrupt
+ * @arg @ref FLASH_IT_ERR Error Interrupt
+ * @retval none
+ */
+#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__) SET_BIT((FLASH->CR), (__INTERRUPT__))
+
+/**
+ * @brief Disable the specified FLASH interrupt.
+ * @param __INTERRUPT__ FLASH interrupt
+ * This parameter can be any combination of the following values:
+ * @arg @ref FLASH_IT_EOP End of FLASH Operation Interrupt
+ * @arg @ref FLASH_IT_ERR Error Interrupt
+ * @retval none
+ */
+#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__) CLEAR_BIT((FLASH->CR), (uint32_t)(__INTERRUPT__))
+
+/**
+ * @brief Get the specified FLASH flag status.
+ * @param __FLAG__ specifies the FLASH flag to check.
+ * This parameter can be one of the following values:
+ * @arg @ref FLASH_FLAG_BSY FLASH Busy flag
+ * @arg @ref FLASH_FLAG_EOP FLASH End of Operation flag
+ * @arg @ref FLASH_FLAG_WRPERR FLASH Write protected error flag
+ * @arg @ref FLASH_FLAG_PGERR FLASH Programming error flag
+ * @retval The new state of __FLAG__ (SET or RESET).
+ */
+#define __HAL_FLASH_GET_FLAG(__FLAG__) (((FLASH->SR) & (__FLAG__)) == (__FLAG__))
+
+/**
+ * @brief Clear the specified FLASH flag.
+ * @param __FLAG__ specifies the FLASH flags to clear.
+ * This parameter can be any combination of the following values:
+ * @arg @ref FLASH_FLAG_EOP FLASH End of Operation flag
+ * @arg @ref FLASH_FLAG_WRPERR FLASH Write protected error flag
+ * @arg @ref FLASH_FLAG_PGERR FLASH Programming error flag
+ * @retval none
+ */
+#define __HAL_FLASH_CLEAR_FLAG(__FLAG__) ((FLASH->SR) = (__FLAG__))
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Include FLASH HAL Extended module */
+#include "stm32f0xx_hal_flash_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup FLASH_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup FLASH_Exported_Functions_Group1
+ * @{
+ */
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
+HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
+
+/* FLASH IRQ handler function */
+void HAL_FLASH_IRQHandler(void);
+/* Callbacks in non blocking modes */
+void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue);
+void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue);
+
+/**
+ * @}
+ */
+
+/** @addtogroup FLASH_Exported_Functions_Group2
+ * @{
+ */
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef HAL_FLASH_Unlock(void);
+HAL_StatusTypeDef HAL_FLASH_Lock(void);
+HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void);
+HAL_StatusTypeDef HAL_FLASH_OB_Lock(void);
+HAL_StatusTypeDef HAL_FLASH_OB_Launch(void);
+
+/**
+ * @}
+ */
+
+/** @addtogroup FLASH_Exported_Functions_Group3
+ * @{
+ */
+/* Peripheral State and Error functions ***************************************/
+uint32_t HAL_FLASH_GetError(void);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private function -------------------------------------------------*/
+/** @addtogroup FLASH_Private_Functions
+ * @{
+ */
+HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_FLASH_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h
new file mode 100644
index 0000000..a4c79d8
--- /dev/null
+++ b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_flash_ex.h
@@ -0,0 +1,448 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_flash_ex.h
+ * @author MCD Application Team
+ * @brief Header file of Flash HAL Extended module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_FLASH_EX_H
+#define __STM32F0xx_HAL_FLASH_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup FLASHEx
+ * @{
+ */
+
+/** @addtogroup FLASHEx_Private_Macros
+ * @{
+ */
+#define IS_FLASH_TYPEERASE(VALUE) (((VALUE) == FLASH_TYPEERASE_PAGES) || \
+ ((VALUE) == FLASH_TYPEERASE_MASSERASE))
+
+#define IS_OPTIONBYTE(VALUE) ((VALUE) <= (OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER | OPTIONBYTE_DATA))
+
+#define IS_WRPSTATE(VALUE) (((VALUE) == OB_WRPSTATE_DISABLE) || \
+ ((VALUE) == OB_WRPSTATE_ENABLE))
+
+#define IS_OB_DATA_ADDRESS(ADDRESS) (((ADDRESS) == OB_DATA_ADDRESS_DATA0) || ((ADDRESS) == OB_DATA_ADDRESS_DATA1))
+
+#define IS_OB_RDP_LEVEL(LEVEL) (((LEVEL) == OB_RDP_LEVEL_0) ||\
+ ((LEVEL) == OB_RDP_LEVEL_1))/*||\
+ ((LEVEL) == OB_RDP_LEVEL_2))*/
+
+#define IS_OB_IWDG_SOURCE(SOURCE) (((SOURCE) == OB_IWDG_SW) || ((SOURCE) == OB_IWDG_HW))
+
+#define IS_OB_STOP_SOURCE(SOURCE) (((SOURCE) == OB_STOP_NO_RST) || ((SOURCE) == OB_STOP_RST))
+
+#define IS_OB_STDBY_SOURCE(SOURCE) (((SOURCE) == OB_STDBY_NO_RST) || ((SOURCE) == OB_STDBY_RST))
+
+#define IS_OB_BOOT1(BOOT1) (((BOOT1) == OB_BOOT1_RESET) || ((BOOT1) == OB_BOOT1_SET))
+
+#define IS_OB_VDDA_ANALOG(ANALOG) (((ANALOG) == OB_VDDA_ANALOG_ON) || ((ANALOG) == OB_VDDA_ANALOG_OFF))
+
+#define IS_OB_SRAM_PARITY(PARITY) (((PARITY) == OB_SRAM_PARITY_SET) || ((PARITY) == OB_SRAM_PARITY_RESET))
+
+#if defined(FLASH_OBR_BOOT_SEL)
+#define IS_OB_BOOT_SEL(BOOT_SEL) (((BOOT_SEL) == OB_BOOT_SEL_RESET) || ((BOOT_SEL) == OB_BOOT_SEL_SET))
+#define IS_OB_BOOT0(BOOT0) (((BOOT0) == OB_BOOT0_RESET) || ((BOOT0) == OB_BOOT0_SET))
+#endif /* FLASH_OBR_BOOT_SEL */
+
+
+#define IS_OB_WRP(PAGE) (((PAGE) != 0x0000000U))
+
+#define IS_FLASH_NB_PAGES(ADDRESS,NBPAGES) ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= FLASH_BANK1_END)
+
+#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= FLASH_BASE) && ((ADDRESS) <= FLASH_BANK1_END))
+
+/**
+ * @}
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup FLASHEx_Exported_Types FLASHEx Exported Types
+ * @{
+ */
+/**
+ * @brief FLASH Erase structure definition
+ */
+typedef struct
+{
+ uint32_t TypeErase; /*!< TypeErase: Mass erase or page erase.
+ This parameter can be a value of @ref FLASHEx_Type_Erase */
+
+ uint32_t PageAddress; /*!< PageAdress: Initial FLASH page address to erase when mass erase is disabled
+ This parameter must be a number between Min_Data = FLASH_BASE and Max_Data = FLASH_BANK1_END */
+
+ uint32_t NbPages; /*!< NbPages: Number of pagess to be erased.
+ This parameter must be a value between Min_Data = 1 and Max_Data = (max number of pages - value of initial page)*/
+
+} FLASH_EraseInitTypeDef;
+
+/**
+ * @brief FLASH Options bytes program structure definition
+ */
+typedef struct
+{
+ uint32_t OptionType; /*!< OptionType: Option byte to be configured.
+ This parameter can be a value of @ref FLASHEx_OB_Type */
+
+ uint32_t WRPState; /*!< WRPState: Write protection activation or deactivation.
+ This parameter can be a value of @ref FLASHEx_OB_WRP_State */
+
+ uint32_t WRPPage; /*!< WRPPage: specifies the page(s) to be write protected
+ This parameter can be a value of @ref FLASHEx_OB_Write_Protection */
+
+ uint8_t RDPLevel; /*!< RDPLevel: Set the read protection level..
+ This parameter can be a value of @ref FLASHEx_OB_Read_Protection */
+
+ uint8_t USERConfig; /*!< USERConfig: Program the FLASH User Option Byte:
+ IWDG / STOP / STDBY / BOOT1 / VDDA_ANALOG / SRAM_PARITY
+ This parameter can be a combination of @ref FLASHEx_OB_IWatchdog, @ref FLASHEx_OB_nRST_STOP,
+ @ref FLASHEx_OB_nRST_STDBY, @ref FLASHEx_OB_BOOT1, @ref FLASHEx_OB_VDDA_Analog_Monitoring and
+ @ref FLASHEx_OB_RAM_Parity_Check_Enable */
+
+ uint32_t DATAAddress; /*!< DATAAddress: Address of the option byte DATA to be programmed
+ This parameter can be a value of @ref FLASHEx_OB_Data_Address */
+
+ uint8_t DATAData; /*!< DATAData: Data to be stored in the option byte DATA
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF */
+} FLASH_OBProgramInitTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup FLASHEx_Exported_Constants FLASHEx Exported Constants
+ * @{
+ */
+
+/** @defgroup FLASHEx_Page_Size FLASHEx Page Size
+ * @{
+ */
+#if defined(STM32F030x6) || defined(STM32F030x8) || defined(STM32F031x6) || defined(STM32F038xx) \
+ || defined(STM32F051x8) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F058xx) || defined(STM32F070x6)
+#define FLASH_PAGE_SIZE 0x400U
+#endif /* STM32F030x6 || STM32F030x8 || STM32F031x6 || STM32F051x8 || STM32F042x6 || STM32F048xx || STM32F058xx || STM32F070x6 */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) \
+ || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+#define FLASH_PAGE_SIZE 0x800U
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F091xC || STM32F098xx || STM32F030xC */
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_Type_Erase FLASH Type Erase
+ * @{
+ */
+#define FLASH_TYPEERASE_PAGES (0x00U) /*!<Pages erase only*/
+#define FLASH_TYPEERASE_MASSERASE (0x01U) /*!<Flash mass erase activation*/
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_OptionByte_Constants Option Byte Constants
+ * @{
+ */
+
+/** @defgroup FLASHEx_OB_Type Option Bytes Type
+ * @{
+ */
+#define OPTIONBYTE_WRP (0x01U) /*!<WRP option byte configuration*/
+#define OPTIONBYTE_RDP (0x02U) /*!<RDP option byte configuration*/
+#define OPTIONBYTE_USER (0x04U) /*!<USER option byte configuration*/
+#define OPTIONBYTE_DATA (0x08U) /*!<DATA option byte configuration*/
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_OB_WRP_State Option Byte WRP State
+ * @{
+ */
+#define OB_WRPSTATE_DISABLE (0x00U) /*!<Disable the write protection of the desired pages*/
+#define OB_WRPSTATE_ENABLE (0x01U) /*!<Enable the write protection of the desired pagess*/
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_OB_Write_Protection FLASHEx OB Write Protection
+ * @{
+ */
+#if defined(STM32F030x6) || defined(STM32F030x8) || defined(STM32F031x6) || defined(STM32F038xx) \
+ || defined(STM32F051x8) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F058xx) || defined(STM32F070x6)
+#define OB_WRP_PAGES0TO3 (0x00000001U) /* Write protection of page 0 to 3 */
+#define OB_WRP_PAGES4TO7 (0x00000002U) /* Write protection of page 4 to 7 */
+#define OB_WRP_PAGES8TO11 (0x00000004U) /* Write protection of page 8 to 11 */
+#define OB_WRP_PAGES12TO15 (0x00000008U) /* Write protection of page 12 to 15 */
+#define OB_WRP_PAGES16TO19 (0x00000010U) /* Write protection of page 16 to 19 */
+#define OB_WRP_PAGES20TO23 (0x00000020U) /* Write protection of page 20 to 23 */
+#define OB_WRP_PAGES24TO27 (0x00000040U) /* Write protection of page 24 to 27 */
+#define OB_WRP_PAGES28TO31 (0x00000080U) /* Write protection of page 28 to 31 */
+#if defined(STM32F030x8) || defined(STM32F051x8) || defined(STM32F058xx)
+#define OB_WRP_PAGES32TO35 (0x00000100U) /* Write protection of page 32 to 35 */
+#define OB_WRP_PAGES36TO39 (0x00000200U) /* Write protection of page 36 to 39 */
+#define OB_WRP_PAGES40TO43 (0x00000400U) /* Write protection of page 40 to 43 */
+#define OB_WRP_PAGES44TO47 (0x00000800U) /* Write protection of page 44 to 47 */
+#define OB_WRP_PAGES48TO51 (0x00001000U) /* Write protection of page 48 to 51 */
+#define OB_WRP_PAGES52TO57 (0x00002000U) /* Write protection of page 52 to 57 */
+#define OB_WRP_PAGES56TO59 (0x00004000U) /* Write protection of page 56 to 59 */
+#define OB_WRP_PAGES60TO63 (0x00008000U) /* Write protection of page 60 to 63 */
+#endif /* STM32F030x8 || STM32F051x8 || STM32F058xx */
+
+#if defined(STM32F030x6) || defined(STM32F030x8) || defined(STM32F031x6) || defined(STM32F038xx) \
+ || defined(STM32F051x8) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F058xx) || defined(STM32F070x6)
+#define OB_WRP_PAGES0TO31MASK (0x000000FFU)
+#endif /* STM32F030x6 || STM32F030x8 || STM32F031x6 || STM32F051x8 || STM32F042x6 || STM32F048xx || STM32F038xx || STM32F058xx || STM32F070x6 */
+
+#if defined(STM32F030x8) || defined(STM32F051x8) || defined(STM32F058xx)
+#define OB_WRP_PAGES32TO63MASK (0x0000FF00U)
+#endif /* STM32F030x8 || STM32F051x8 || STM32F058xx */
+
+#if defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F038xx)|| defined(STM32F070x6)
+#define OB_WRP_ALLPAGES (0x000000FFU) /*!< Write protection of all pages */
+#endif /* STM32F030x6 || STM32F031x6 || STM32F042x6 || STM32F048xx || STM32F038xx || STM32F070x6 */
+
+#if defined(STM32F030x8) || defined(STM32F051x8) || defined(STM32F058xx)
+#define OB_WRP_ALLPAGES (0x0000FFFFU) /*!< Write protection of all pages */
+#endif /* STM32F030x8 || STM32F051x8 || STM32F058xx */
+#endif /* STM32F030x6 || STM32F030x8 || STM32F031x6 || STM32F051x8 || STM32F042x6 || STM32F048xx || STM32F038xx || STM32F058xx || STM32F070x6 */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) \
+ || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+#define OB_WRP_PAGES0TO1 (0x00000001U) /* Write protection of page 0 to 1 */
+#define OB_WRP_PAGES2TO3 (0x00000002U) /* Write protection of page 2 to 3 */
+#define OB_WRP_PAGES4TO5 (0x00000004U) /* Write protection of page 4 to 5 */
+#define OB_WRP_PAGES6TO7 (0x00000008U) /* Write protection of page 6 to 7 */
+#define OB_WRP_PAGES8TO9 (0x00000010U) /* Write protection of page 8 to 9 */
+#define OB_WRP_PAGES10TO11 (0x00000020U) /* Write protection of page 10 to 11 */
+#define OB_WRP_PAGES12TO13 (0x00000040U) /* Write protection of page 12 to 13 */
+#define OB_WRP_PAGES14TO15 (0x00000080U) /* Write protection of page 14 to 15 */
+#define OB_WRP_PAGES16TO17 (0x00000100U) /* Write protection of page 16 to 17 */
+#define OB_WRP_PAGES18TO19 (0x00000200U) /* Write protection of page 18 to 19 */
+#define OB_WRP_PAGES20TO21 (0x00000400U) /* Write protection of page 20 to 21 */
+#define OB_WRP_PAGES22TO23 (0x00000800U) /* Write protection of page 22 to 23 */
+#define OB_WRP_PAGES24TO25 (0x00001000U) /* Write protection of page 24 to 25 */
+#define OB_WRP_PAGES26TO27 (0x00002000U) /* Write protection of page 26 to 27 */
+#define OB_WRP_PAGES28TO29 (0x00004000U) /* Write protection of page 28 to 29 */
+#define OB_WRP_PAGES30TO31 (0x00008000U) /* Write protection of page 30 to 31 */
+#define OB_WRP_PAGES32TO33 (0x00010000U) /* Write protection of page 32 to 33 */
+#define OB_WRP_PAGES34TO35 (0x00020000U) /* Write protection of page 34 to 35 */
+#define OB_WRP_PAGES36TO37 (0x00040000U) /* Write protection of page 36 to 37 */
+#define OB_WRP_PAGES38TO39 (0x00080000U) /* Write protection of page 38 to 39 */
+#define OB_WRP_PAGES40TO41 (0x00100000U) /* Write protection of page 40 to 41 */
+#define OB_WRP_PAGES42TO43 (0x00200000U) /* Write protection of page 42 to 43 */
+#define OB_WRP_PAGES44TO45 (0x00400000U) /* Write protection of page 44 to 45 */
+#define OB_WRP_PAGES46TO47 (0x00800000U) /* Write protection of page 46 to 47 */
+#define OB_WRP_PAGES48TO49 (0x01000000U) /* Write protection of page 48 to 49 */
+#define OB_WRP_PAGES50TO51 (0x02000000U) /* Write protection of page 50 to 51 */
+#define OB_WRP_PAGES52TO53 (0x04000000U) /* Write protection of page 52 to 53 */
+#define OB_WRP_PAGES54TO55 (0x08000000U) /* Write protection of page 54 to 55 */
+#define OB_WRP_PAGES56TO57 (0x10000000U) /* Write protection of page 56 to 57 */
+#define OB_WRP_PAGES58TO59 (0x20000000U) /* Write protection of page 58 to 59 */
+#define OB_WRP_PAGES60TO61 (0x40000000U) /* Write protection of page 60 to 61 */
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)
+#define OB_WRP_PAGES62TO63 (0x80000000U) /* Write protection of page 62 to 63 */
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB */
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+#define OB_WRP_PAGES62TO127 (0x80000000U) /* Write protection of page 62 to 127 */
+#endif /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) \
+ || defined(STM32F091xC) || defined(STM32F098xx)|| defined(STM32F030xC)
+#define OB_WRP_PAGES0TO15MASK (0x000000FFU)
+#define OB_WRP_PAGES16TO31MASK (0x0000FF00U)
+#define OB_WRP_PAGES32TO47MASK (0x00FF0000U)
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F091xC || STM32F098xx || STM32F070xB || STM32F030xC */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)
+#define OB_WRP_PAGES48TO63MASK (0xFF000000U)
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB */
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+#define OB_WRP_PAGES48TO127MASK (0xFF000000U)
+#endif /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#define OB_WRP_ALLPAGES (0xFFFFFFFFU) /*!< Write protection of all pages */
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F091xC || STM32F098xx || STM32F030xC || STM32F070xB */
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_OB_Read_Protection Option Byte Read Protection
+ * @{
+ */
+#define OB_RDP_LEVEL_0 ((uint8_t)0xAAU)
+#define OB_RDP_LEVEL_1 ((uint8_t)0xBBU)
+#define OB_RDP_LEVEL_2 ((uint8_t)0xCCU) /*!< Warning: When enabling read protection level 2
+ it's no more possible to go back to level 1 or 0 */
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_OB_IWatchdog Option Byte IWatchdog
+ * @{
+ */
+#define OB_IWDG_SW ((uint8_t)0x01U) /*!< Software IWDG selected */
+#define OB_IWDG_HW ((uint8_t)0x00U) /*!< Hardware IWDG selected */
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_OB_nRST_STOP Option Byte nRST STOP
+ * @{
+ */
+#define OB_STOP_NO_RST ((uint8_t)0x02U) /*!< No reset generated when entering in STOP */
+#define OB_STOP_RST ((uint8_t)0x00U) /*!< Reset generated when entering in STOP */
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_OB_nRST_STDBY Option Byte nRST STDBY
+ * @{
+ */
+#define OB_STDBY_NO_RST ((uint8_t)0x04U) /*!< No reset generated when entering in STANDBY */
+#define OB_STDBY_RST ((uint8_t)0x00U) /*!< Reset generated when entering in STANDBY */
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_OB_BOOT1 Option Byte BOOT1
+ * @{
+ */
+#define OB_BOOT1_RESET ((uint8_t)0x00U) /*!< BOOT1 Reset */
+#define OB_BOOT1_SET ((uint8_t)0x10U) /*!< BOOT1 Set */
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_OB_VDDA_Analog_Monitoring Option Byte VDDA Analog Monitoring
+ * @{
+ */
+#define OB_VDDA_ANALOG_ON ((uint8_t)0x20U) /*!< Analog monitoring on VDDA Power source ON */
+#define OB_VDDA_ANALOG_OFF ((uint8_t)0x00U) /*!< Analog monitoring on VDDA Power source OFF */
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_OB_RAM_Parity_Check_Enable Option Byte SRAM Parity Check Enable
+ * @{
+ */
+#define OB_SRAM_PARITY_SET ((uint8_t)0x00U) /*!< SRAM parity check enable set */
+#define OB_SRAM_PARITY_RESET ((uint8_t)0x40U) /*!< SRAM parity check enable reset */
+/**
+ * @}
+ */
+
+#if defined(FLASH_OBR_BOOT_SEL)
+/** @defgroup FLASHEx_OB_BOOT_SEL FLASHEx Option Byte BOOT SEL
+ * @{
+ */
+#define OB_BOOT_SEL_RESET ((uint8_t)0x00U) /*!< BOOT_SEL Reset */
+#define OB_BOOT_SEL_SET ((uint8_t)0x80U) /*!< BOOT_SEL Set */
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_OB_BOOT0 FLASHEx Option Byte BOOT0
+ * @{
+ */
+#define OB_BOOT0_RESET ((uint8_t)0x00U) /*!< BOOT0 Reset */
+#define OB_BOOT0_SET ((uint8_t)0x08U) /*!< BOOT0 Set */
+/**
+ * @}
+ */
+#endif /* FLASH_OBR_BOOT_SEL */
+
+
+/** @defgroup FLASHEx_OB_Data_Address Option Byte Data Address
+ * @{
+ */
+#define OB_DATA_ADDRESS_DATA0 (0x1FFFF804U)
+#define OB_DATA_ADDRESS_DATA1 (0x1FFFF806U)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup FLASHEx_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup FLASHEx_Exported_Functions_Group1
+ * @{
+ */
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *PageError);
+HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit);
+
+/**
+ * @}
+ */
+
+/** @addtogroup FLASHEx_Exported_Functions_Group2
+ * @{
+ */
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef HAL_FLASHEx_OBErase(void);
+HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit);
+void HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit);
+uint32_t HAL_FLASHEx_OBGetUserData(uint32_t DATAAdress);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_FLASH_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h
new file mode 100644
index 0000000..fa58dd9
--- /dev/null
+++ b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h
@@ -0,0 +1,296 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_gpio.h
+ * @author MCD Application Team
+ * @brief Header file of GPIO HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_GPIO_H
+#define __STM32F0xx_HAL_GPIO_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup GPIO
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup GPIO_Exported_Types GPIO Exported Types
+ * @{
+ */
+/**
+ * @brief GPIO Init structure definition
+ */
+typedef struct
+{
+ uint32_t Pin; /*!< Specifies the GPIO pins to be configured.
+ This parameter can be any value of @ref GPIO_pins */
+
+ uint32_t Mode; /*!< Specifies the operating mode for the selected pins.
+ This parameter can be a value of @ref GPIO_mode */
+
+ uint32_t Pull; /*!< Specifies the Pull-up or Pull-Down activation for the selected pins.
+ This parameter can be a value of @ref GPIO_pull */
+
+ uint32_t Speed; /*!< Specifies the speed for the selected pins.
+ This parameter can be a value of @ref GPIO_speed */
+
+ uint32_t Alternate; /*!< Peripheral to be connected to the selected pins
+ This parameter can be a value of @ref GPIOEx_Alternate_function_selection */
+}GPIO_InitTypeDef;
+
+/**
+ * @brief GPIO Bit SET and Bit RESET enumeration
+ */
+typedef enum
+{
+ GPIO_PIN_RESET = 0U,
+ GPIO_PIN_SET
+}GPIO_PinState;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup GPIO_Exported_Constants GPIO Exported Constants
+ * @{
+ */
+/** @defgroup GPIO_pins GPIO pins
+ * @{
+ */
+#define GPIO_PIN_0 ((uint16_t)0x0001U) /* Pin 0 selected */
+#define GPIO_PIN_1 ((uint16_t)0x0002U) /* Pin 1 selected */
+#define GPIO_PIN_2 ((uint16_t)0x0004U) /* Pin 2 selected */
+#define GPIO_PIN_3 ((uint16_t)0x0008U) /* Pin 3 selected */
+#define GPIO_PIN_4 ((uint16_t)0x0010U) /* Pin 4 selected */
+#define GPIO_PIN_5 ((uint16_t)0x0020U) /* Pin 5 selected */
+#define GPIO_PIN_6 ((uint16_t)0x0040U) /* Pin 6 selected */
+#define GPIO_PIN_7 ((uint16_t)0x0080U) /* Pin 7 selected */
+#define GPIO_PIN_8 ((uint16_t)0x0100U) /* Pin 8 selected */
+#define GPIO_PIN_9 ((uint16_t)0x0200U) /* Pin 9 selected */
+#define GPIO_PIN_10 ((uint16_t)0x0400U) /* Pin 10 selected */
+#define GPIO_PIN_11 ((uint16_t)0x0800U) /* Pin 11 selected */
+#define GPIO_PIN_12 ((uint16_t)0x1000U) /* Pin 12 selected */
+#define GPIO_PIN_13 ((uint16_t)0x2000U) /* Pin 13 selected */
+#define GPIO_PIN_14 ((uint16_t)0x4000U) /* Pin 14 selected */
+#define GPIO_PIN_15 ((uint16_t)0x8000U) /* Pin 15 selected */
+#define GPIO_PIN_All ((uint16_t)0xFFFFU) /* All pins selected */
+
+#define GPIO_PIN_MASK (0x0000FFFFU) /* PIN mask for assert test */
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_mode GPIO mode
+ * @brief GPIO Configuration Mode
+ * Elements values convention: 0xX0yz00YZ
+ * - X : GPIO mode or EXTI Mode
+ * - y : External IT or Event trigger detection
+ * - z : IO configuration on External IT or Event
+ * - Y : Output type (Push Pull or Open Drain)
+ * - Z : IO Direction mode (Input, Output, Alternate or Analog)
+ * @{
+ */
+#define GPIO_MODE_INPUT (0x00000000U) /*!< Input Floating Mode */
+#define GPIO_MODE_OUTPUT_PP (0x00000001U) /*!< Output Push Pull Mode */
+#define GPIO_MODE_OUTPUT_OD (0x00000011U) /*!< Output Open Drain Mode */
+#define GPIO_MODE_AF_PP (0x00000002U) /*!< Alternate Function Push Pull Mode */
+#define GPIO_MODE_AF_OD (0x00000012U) /*!< Alternate Function Open Drain Mode */
+#define GPIO_MODE_ANALOG (0x00000003U) /*!< Analog Mode */
+#define GPIO_MODE_IT_RISING (0x10110000U) /*!< External Interrupt Mode with Rising edge trigger detection */
+#define GPIO_MODE_IT_FALLING (0x10210000U) /*!< External Interrupt Mode with Falling edge trigger detection */
+#define GPIO_MODE_IT_RISING_FALLING (0x10310000U) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
+#define GPIO_MODE_EVT_RISING (0x10120000U) /*!< External Event Mode with Rising edge trigger detection */
+#define GPIO_MODE_EVT_FALLING (0x10220000U) /*!< External Event Mode with Falling edge trigger detection */
+#define GPIO_MODE_EVT_RISING_FALLING (0x10320000U) /*!< External Event Mode with Rising/Falling edge trigger detection */
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_speed GPIO speed
+ * @brief GPIO Output Maximum frequency
+ * @{
+ */
+#define GPIO_SPEED_FREQ_LOW (0x00000000U) /*!< range up to 2 MHz, please refer to the product datasheet */
+#define GPIO_SPEED_FREQ_MEDIUM (0x00000001U) /*!< range 4 MHz to 10 MHz, please refer to the product datasheet */
+#define GPIO_SPEED_FREQ_HIGH (0x00000003U) /*!< range 10 MHz to 50 MHz, please refer to the product datasheet */
+/**
+ * @}
+ */
+
+ /** @defgroup GPIO_pull GPIO pull
+ * @brief GPIO Pull-Up or Pull-Down Activation
+ * @{
+ */
+#define GPIO_NOPULL (0x00000000U) /*!< No Pull-up or Pull-down activation */
+#define GPIO_PULLUP (0x00000001U) /*!< Pull-up activation */
+#define GPIO_PULLDOWN (0x00000002U) /*!< Pull-down activation */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup GPIO_Exported_Macros GPIO Exported Macros
+ * @{
+ */
+
+/**
+ * @brief Check whether the specified EXTI line flag is set or not.
+ * @param __EXTI_LINE__ specifies the EXTI line flag to check.
+ * This parameter can be GPIO_PIN_x where x can be(0..15)
+ * @retval The new state of __EXTI_LINE__ (SET or RESET).
+ */
+#define __HAL_GPIO_EXTI_GET_FLAG(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))
+
+/**
+ * @brief Clear the EXTI's line pending flags.
+ * @param __EXTI_LINE__ specifies the EXTI lines flags to clear.
+ * This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
+ * @retval None
+ */
+#define __HAL_GPIO_EXTI_CLEAR_FLAG(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))
+
+/**
+ * @brief Check whether the specified EXTI line is asserted or not.
+ * @param __EXTI_LINE__ specifies the EXTI line to check.
+ * This parameter can be GPIO_PIN_x where x can be(0..15)
+ * @retval The new state of __EXTI_LINE__ (SET or RESET).
+ */
+#define __HAL_GPIO_EXTI_GET_IT(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))
+
+/**
+ * @brief Clear the EXTI's line pending bits.
+ * @param __EXTI_LINE__ specifies the EXTI lines to clear.
+ * This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
+ * @retval None
+ */
+#define __HAL_GPIO_EXTI_CLEAR_IT(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))
+
+/**
+ * @brief Generate a Software interrupt on selected EXTI line.
+ * @param __EXTI_LINE__ specifies the EXTI line to check.
+ * This parameter can be GPIO_PIN_x where x can be(0..15)
+ * @retval None
+ */
+#define __HAL_GPIO_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER |= (__EXTI_LINE__))
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @addtogroup GPIO_Private_Macros GPIO Private Macros
+ * @{
+ */
+#define IS_GPIO_PIN_ACTION(ACTION) (((ACTION) == GPIO_PIN_RESET) || ((ACTION) == GPIO_PIN_SET))
+
+#define IS_GPIO_PIN(__PIN__) (((((uint32_t)__PIN__) & GPIO_PIN_MASK) != 0x00U) &&\
+ ((((uint32_t)__PIN__) & ~GPIO_PIN_MASK) == 0x00U))
+
+#define IS_GPIO_MODE(__MODE__) (((__MODE__) == GPIO_MODE_INPUT) ||\
+ ((__MODE__) == GPIO_MODE_OUTPUT_PP) ||\
+ ((__MODE__) == GPIO_MODE_OUTPUT_OD) ||\
+ ((__MODE__) == GPIO_MODE_AF_PP) ||\
+ ((__MODE__) == GPIO_MODE_AF_OD) ||\
+ ((__MODE__) == GPIO_MODE_IT_RISING) ||\
+ ((__MODE__) == GPIO_MODE_IT_FALLING) ||\
+ ((__MODE__) == GPIO_MODE_IT_RISING_FALLING) ||\
+ ((__MODE__) == GPIO_MODE_EVT_RISING) ||\
+ ((__MODE__) == GPIO_MODE_EVT_FALLING) ||\
+ ((__MODE__) == GPIO_MODE_EVT_RISING_FALLING) ||\
+ ((__MODE__) == GPIO_MODE_ANALOG))
+
+#define IS_GPIO_SPEED(__SPEED__) (((__SPEED__) == GPIO_SPEED_FREQ_LOW) ||\
+ ((__SPEED__) == GPIO_SPEED_FREQ_MEDIUM) ||\
+ ((__SPEED__) == GPIO_SPEED_FREQ_HIGH))
+
+#define IS_GPIO_PULL(__PULL__) (((__PULL__) == GPIO_NOPULL) ||\
+ ((__PULL__) == GPIO_PULLUP) || \
+ ((__PULL__) == GPIO_PULLDOWN))
+/**
+ * @}
+ */
+
+/* Include GPIO HAL Extended module */
+#include "stm32f0xx_hal_gpio_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup GPIO_Exported_Functions GPIO Exported Functions
+ * @{
+ */
+
+/** @addtogroup GPIO_Exported_Functions_Group1 Initialization/de-initialization functions
+ * @brief Initialization and Configuration functions
+ * @{
+ */
+
+/* Initialization and de-initialization functions *****************************/
+void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init);
+void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin);
+
+/**
+ * @}
+ */
+
+/** @addtogroup GPIO_Exported_Functions_Group2 IO operation functions
+ * @{
+ */
+
+/* IO operation functions *****************************************************/
+GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState);
+void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin);
+void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_GPIO_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h
new file mode 100644
index 0000000..33b27e3
--- /dev/null
+++ b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio_ex.h
@@ -0,0 +1,800 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_gpio_ex.h
+ * @author MCD Application Team
+ * @brief Header file of GPIO HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_GPIO_EX_H
+#define __STM32F0xx_HAL_GPIO_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup GPIOEx GPIOEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup GPIOEx_Exported_Constants GPIOEx Exported Constants
+ * @{
+ */
+
+/** @defgroup GPIOEx_Alternate_function_selection GPIOEx Alternate function selection
+ * @{
+ */
+
+#if defined (STM32F030x6)
+/*------------------------- STM32F030x6---------------------------*/
+/* AF 0 */
+#define GPIO_AF0_EVENTOUT ((uint8_t)0x00U) /*!< AF0: EVENTOUT Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00U) /*!< AF0: MCO Alternate Function mapping */
+#define GPIO_AF0_SPI1 ((uint8_t)0x00U) /*!< AF0: SPI1 Alternate Function mapping */
+#define GPIO_AF0_TIM17 ((uint8_t)0x00U) /*!< AF0: TIM17 Alternate Function mapping */
+#define GPIO_AF0_SWDIO ((uint8_t)0x00U) /*!< AF0: SWDIO Alternate Function mapping */
+#define GPIO_AF0_SWCLK ((uint8_t)0x00U) /*!< AF0: SWCLK Alternate Function mapping */
+#define GPIO_AF0_TIM14 ((uint8_t)0x00U) /*!< AF0: TIM14 Alternate Function mapping */
+#define GPIO_AF0_USART1 ((uint8_t)0x00U) /*!< AF0: USART1 Alternate Function mapping */
+#define GPIO_AF0_IR ((uint8_t)0x00U) /*!< AF0: IR Alternate Function mapping */
+#define GPIO_AF0_TIM3 ((uint8_t)0x00U) /*!< AF0: TIM3 Alternate Function mapping */
+
+/* AF 1 */
+#define GPIO_AF1_TIM3 ((uint8_t)0x01U) /*!< AF1: TIM3 Alternate Function mapping */
+#define GPIO_AF1_USART1 ((uint8_t)0x01U) /*!< AF1: USART1 Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01U) /*!< AF1: EVENTOUT Alternate Function mapping */
+#define GPIO_AF1_I2C1 ((uint8_t)0x01U) /*!< AF1: I2C1 Alternate Function mapping */
+#define GPIO_AF1_IR ((uint8_t)0x01U) /*!< AF1: IR Alternate Function mapping */
+
+/* AF 2 */
+#define GPIO_AF2_TIM1 ((uint8_t)0x02U) /*!< AF2: TIM1 Alternate Function mapping */
+#define GPIO_AF2_TIM16 ((uint8_t)0x02U) /*!< AF2: TIM16 Alternate Function mapping */
+#define GPIO_AF2_TIM17 ((uint8_t)0x02U) /*!< AF2: TIM17 Alternate Function mapping */
+#define GPIO_AF2_EVENTOUT ((uint8_t)0x02U) /*!< AF2: EVENTOUT Alternate Function mapping */
+
+/* AF 3 */
+#define GPIO_AF3_EVENTOUT ((uint8_t)0x03U) /*!< AF3: EVENTOUT Alternate Function mapping */
+#define GPIO_AF3_I2C1 ((uint8_t)0x03U) /*!< AF3: I2C1 Alternate Function mapping */
+
+/* AF 4 */
+#define GPIO_AF4_TIM14 ((uint8_t)0x04U) /*!< AF4: TIM14 Alternate Function mapping */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04U) /*!< AF4: I2C1 Alternate Function mapping */
+
+/* AF 5 */
+#define GPIO_AF5_TIM16 ((uint8_t)0x05U) /*!< AF5: TIM16 Alternate Function mapping */
+#define GPIO_AF5_TIM17 ((uint8_t)0x05U) /*!< AF5: TIM17 Alternate Function mapping */
+
+/* AF 6 */
+#define GPIO_AF6_EVENTOUT ((uint8_t)0x06U) /*!< AF6: EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x06U)
+
+#endif /* STM32F030x6 */
+
+/*---------------------------------- STM32F030x8 -------------------------------------------*/
+#if defined (STM32F030x8)
+/* AF 0 */
+#define GPIO_AF0_EVENTOUT ((uint8_t)0x00U) /*!< AF0: EVENTOUT Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00U) /*!< AF0: MCO Alternate Function mapping */
+#define GPIO_AF0_SPI1 ((uint8_t)0x00U) /*!< AF0: SPI1 Alternate Function mapping */
+#define GPIO_AF0_SPI2 ((uint8_t)0x00U) /*!< AF0: SPI2 Alternate Function mapping */
+#define GPIO_AF0_TIM15 ((uint8_t)0x00U) /*!< AF0: TIM15 Alternate Function mapping */
+#define GPIO_AF0_TIM17 ((uint8_t)0x00U) /*!< AF0: TIM17 Alternate Function mapping */
+#define GPIO_AF0_SWDIO ((uint8_t)0x00U) /*!< AF0: SWDIO Alternate Function mapping */
+#define GPIO_AF0_SWCLK ((uint8_t)0x00U) /*!< AF0: SWCLK Alternate Function mapping */
+#define GPIO_AF0_TIM14 ((uint8_t)0x00U) /*!< AF0: TIM14 Alternate Function mapping */
+#define GPIO_AF0_USART1 ((uint8_t)0x00U) /*!< AF0: USART1 Alternate Function mapping */
+#define GPIO_AF0_IR ((uint8_t)0x00U) /*!< AF0: IR Alternate Function mapping */
+#define GPIO_AF0_TIM3 ((uint8_t)0x00U) /*!< AF0: TIM3 Alternate Function mapping */
+
+/* AF 1 */
+#define GPIO_AF1_TIM3 ((uint8_t)0x01U) /*!< AF1: TIM3 Alternate Function mapping */
+#define GPIO_AF1_TIM15 ((uint8_t)0x01U) /*!< AF1: TIM15 Alternate Function mapping */
+#define GPIO_AF1_USART1 ((uint8_t)0x01U) /*!< AF1: USART1 Alternate Function mapping */
+#define GPIO_AF1_USART2 ((uint8_t)0x01U) /*!< AF1: USART2 Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01U) /*!< AF1: EVENTOUT Alternate Function mapping */
+#define GPIO_AF1_I2C1 ((uint8_t)0x01U) /*!< AF1: I2C1 Alternate Function mapping */
+#define GPIO_AF1_I2C2 ((uint8_t)0x01U) /*!< AF1: I2C2 Alternate Function mapping */
+#define GPIO_AF1_IR ((uint8_t)0x01U) /*!< AF1: IR Alternate Function mapping */
+
+/* AF 2 */
+#define GPIO_AF2_TIM1 ((uint8_t)0x02U) /*!< AF2: TIM1 Alternate Function mapping */
+#define GPIO_AF2_TIM16 ((uint8_t)0x02U) /*!< AF2: TIM16 Alternate Function mapping */
+#define GPIO_AF2_TIM17 ((uint8_t)0x02U) /*!< AF2: TIM17 Alternate Function mapping */
+#define GPIO_AF2_EVENTOUT ((uint8_t)0x02U) /*!< AF2: EVENTOUT Alternate Function mapping */
+
+/* AF 3 */
+#define GPIO_AF3_EVENTOUT ((uint8_t)0x03U) /*!< AF3: EVENTOUT Alternate Function mapping */
+#define GPIO_AF3_I2C1 ((uint8_t)0x03U) /*!< AF3: I2C1 Alternate Function mapping */
+#define GPIO_AF3_TIM15 ((uint8_t)0x03U) /*!< AF3: TIM15 Alternate Function mapping */
+
+/* AF 4 */
+#define GPIO_AF4_TIM14 ((uint8_t)0x04U) /*!< AF4: TIM14 Alternate Function mapping */
+
+/* AF 5 */
+#define GPIO_AF5_TIM16 ((uint8_t)0x05U) /*!< AF5: TIM16 Alternate Function mapping */
+#define GPIO_AF5_TIM17 ((uint8_t)0x05U) /*!< AF5: TIM17 Alternate Function mapping */
+
+/* AF 6 */
+#define GPIO_AF6_EVENTOUT ((uint8_t)0x06U) /*!< AF6: EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x06U)
+
+#endif /* STM32F030x8 */
+
+#if defined (STM32F031x6) || defined (STM32F038xx)
+/*--------------------------- STM32F031x6/STM32F038xx ---------------------------*/
+/* AF 0 */
+#define GPIO_AF0_EVENTOUT ((uint8_t)0x00U) /*!< AF0: EVENTOUT Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00U) /*!< AF0: MCO Alternate Function mapping */
+#define GPIO_AF0_SPI1 ((uint8_t)0x00U) /*!< AF0: SPI1/I2S1 Alternate Function mapping */
+#define GPIO_AF0_TIM17 ((uint8_t)0x00U) /*!< AF0: TIM17 Alternate Function mapping */
+#define GPIO_AF0_SWDAT ((uint8_t)0x00U) /*!< AF0: SWDAT Alternate Function mapping */
+#define GPIO_AF0_SWCLK ((uint8_t)0x00U) /*!< AF0: SWCLK Alternate Function mapping */
+#define GPIO_AF0_TIM14 ((uint8_t)0x00U) /*!< AF0: TIM14 Alternate Function mapping */
+#define GPIO_AF0_USART1 ((uint8_t)0x00U) /*!< AF0: USART1 Alternate Function mapping */
+#define GPIO_AF0_IR ((uint8_t)0x00U) /*!< AF0: IR Alternate Function mapping */
+
+/* AF 1 */
+#define GPIO_AF1_TIM3 ((uint8_t)0x01U) /*!< AF1: TIM3 Alternate Function mapping */
+#define GPIO_AF1_USART1 ((uint8_t)0x01U) /*!< AF1: USART1 Alternate Function mapping */
+#define GPIO_AF1_IR ((uint8_t)0x01U) /*!< AF1: IR Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01U) /*!< AF1: EVENTOUT Alternate Function mapping */
+#define GPIO_AF1_I2C1 ((uint8_t)0x01U) /*!< AF1: I2C1 Alternate Function mapping */
+
+/* AF 2 */
+#define GPIO_AF2_TIM1 ((uint8_t)0x02U) /*!< AF2: TIM1 Alternate Function mapping */
+#define GPIO_AF2_TIM2 ((uint8_t)0x02U) /*!< AF2: TIM2 Alternate Function mapping */
+#define GPIO_AF2_TIM16 ((uint8_t)0x02U) /*!< AF2: TIM16 Alternate Function mapping */
+#define GPIO_AF2_TIM17 ((uint8_t)0x02U) /*!< AF2: TIM17 Alternate Function mapping */
+#define GPIO_AF2_EVENTOUT ((uint8_t)0x02U) /*!< AF2: EVENTOUT Alternate Function mapping */
+
+/* AF 3 */
+#define GPIO_AF3_EVENTOUT ((uint8_t)0x03U) /*!< AF3: EVENTOUT Alternate Function mapping */
+#define GPIO_AF3_I2C1 ((uint8_t)0x03U) /*!< AF3: I2C1 Alternate Function mapping */
+
+/* AF 4 */
+#define GPIO_AF4_TIM14 ((uint8_t)0x04U) /*!< AF4: TIM14 Alternate Function mapping */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04U) /*!< AF4: I2C1 Alternate Function mapping */
+
+/* AF 5 */
+#define GPIO_AF5_TIM16 ((uint8_t)0x05U) /*!< AF5: TIM16 Alternate Function mapping */
+#define GPIO_AF5_TIM17 ((uint8_t)0x05U) /*!< AF5: TIM17 Alternate Function mapping */
+
+/* AF 6 */
+#define GPIO_AF6_EVENTOUT ((uint8_t)0x06U) /*!< AF6: EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x06U)
+
+#endif /* STM32F031x6 || STM32F038xx */
+
+#if defined (STM32F051x8) || defined (STM32F058xx)
+/*--------------------------- STM32F051x8/STM32F058xx---------------------------*/
+/* AF 0 */
+#define GPIO_AF0_EVENTOUT ((uint8_t)0x00U) /*!< AF0: EVENTOUT Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00U) /*!< AF0: MCO Alternate Function mapping */
+#define GPIO_AF0_SPI1 ((uint8_t)0x00U) /*!< AF0: SPI1/I2S1 Alternate Function mapping */
+#define GPIO_AF0_SPI2 ((uint8_t)0x00U) /*!< AF0: SPI2 Alternate Function mapping */
+#define GPIO_AF0_TIM15 ((uint8_t)0x00U) /*!< AF0: TIM15 Alternate Function mapping */
+#define GPIO_AF0_TIM17 ((uint8_t)0x00U) /*!< AF0: TIM17 Alternate Function mapping */
+#define GPIO_AF0_SWDIO ((uint8_t)0x00U) /*!< AF0: SWDIO Alternate Function mapping */
+#define GPIO_AF0_SWCLK ((uint8_t)0x00U) /*!< AF0: SWCLK Alternate Function mapping */
+#define GPIO_AF0_TIM14 ((uint8_t)0x00U) /*!< AF0: TIM14 Alternate Function mapping */
+#define GPIO_AF0_USART1 ((uint8_t)0x00U) /*!< AF0: USART1 Alternate Function mapping */
+#define GPIO_AF0_IR ((uint8_t)0x00U) /*!< AF0: IR Alternate Function mapping */
+#define GPIO_AF0_CEC ((uint8_t)0x00U) /*!< AF0: CEC Alternate Function mapping */
+
+/* AF 1 */
+#define GPIO_AF1_TIM3 ((uint8_t)0x01U) /*!< AF1: TIM3 Alternate Function mapping */
+#define GPIO_AF1_TIM15 ((uint8_t)0x01U) /*!< AF1: TIM15 Alternate Function mapping */
+#define GPIO_AF1_USART1 ((uint8_t)0x01U) /*!< AF1: USART1 Alternate Function mapping */
+#define GPIO_AF1_USART2 ((uint8_t)0x01U) /*!< AF1: USART2 Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01U) /*!< AF1: EVENTOUT Alternate Function mapping */
+#define GPIO_AF1_I2C1 ((uint8_t)0x01U) /*!< AF1: I2C1 Alternate Function mapping */
+#define GPIO_AF1_I2C2 ((uint8_t)0x01U) /*!< AF1: I2C2 Alternate Function mapping */
+#define GPIO_AF1_IR ((uint8_t)0x01U) /*!< AF1: IR Alternate Function mapping */
+#define GPIO_AF1_CEC ((uint8_t)0x01U) /*!< AF1: CEC Alternate Function mapping */
+
+/* AF 2 */
+#define GPIO_AF2_TIM1 ((uint8_t)0x02U) /*!< AF2: TIM1 Alternate Function mapping */
+#define GPIO_AF2_TIM2 ((uint8_t)0x02U) /*!< AF2: TIM2 Alternate Function mapping */
+#define GPIO_AF2_TIM16 ((uint8_t)0x02U) /*!< AF2: TIM16 Alternate Function mapping */
+#define GPIO_AF2_TIM17 ((uint8_t)0x02U) /*!< AF2: TIM17 Alternate Function mapping */
+#define GPIO_AF2_EVENTOUT ((uint8_t)0x02U) /*!< AF2: EVENTOUT Alternate Function mapping */
+
+/* AF 3 */
+#define GPIO_AF3_EVENTOUT ((uint8_t)0x03U) /*!< AF3: EVENTOUT Alternate Function mapping */
+#define GPIO_AF3_I2C1 ((uint8_t)0x03U) /*!< AF3: I2C1 Alternate Function mapping */
+#define GPIO_AF3_TIM15 ((uint8_t)0x03U) /*!< AF3: TIM15 Alternate Function mapping */
+#define GPIO_AF3_TSC ((uint8_t)0x03U) /*!< AF3: TSC Alternate Function mapping */
+
+/* AF 4 */
+#define GPIO_AF4_TIM14 ((uint8_t)0x04U) /*!< AF4: TIM14 Alternate Function mapping */
+
+/* AF 5 */
+#define GPIO_AF5_TIM16 ((uint8_t)0x05U) /*!< AF5: TIM16 Alternate Function mapping */
+#define GPIO_AF5_TIM17 ((uint8_t)0x05U) /*!< AF5: TIM17 Alternate Function mapping */
+
+/* AF 6 */
+#define GPIO_AF6_EVENTOUT ((uint8_t)0x06U) /*!< AF6: EVENTOUT Alternate Function mapping */
+
+/* AF 7 */
+#define GPIO_AF7_COMP1 ((uint8_t)0x07U) /*!< AF7: COMP1 Alternate Function mapping */
+#define GPIO_AF7_COMP2 ((uint8_t)0x07U) /*!< AF7: COMP2 Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x07U)
+
+#endif /* STM32F051x8/STM32F058xx */
+
+#if defined (STM32F071xB)
+/*--------------------------- STM32F071xB ---------------------------*/
+/* AF 0 */
+#define GPIO_AF0_EVENTOUT ((uint8_t)0x00U) /*!< AF0: AEVENTOUT Alternate Function mapping */
+#define GPIO_AF0_SWDIO ((uint8_t)0x00U) /*!< AF0: SWDIO Alternate Function mapping */
+#define GPIO_AF0_SWCLK ((uint8_t)0x00U) /*!< AF0: SWCLK Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00U) /*!< AF0: MCO Alternate Function mapping */
+#define GPIO_AF0_CEC ((uint8_t)0x00U) /*!< AF0: CEC Alternate Function mapping */
+#define GPIO_AF0_CRS ((uint8_t)0x00U) /*!< AF0: CRS Alternate Function mapping */
+#define GPIO_AF0_IR ((uint8_t)0x00U) /*!< AF0: IR Alternate Function mapping */
+#define GPIO_AF0_SPI1 ((uint8_t)0x00U) /*!< AF0: SPI1/I2S1 Alternate Function mapping */
+#define GPIO_AF0_SPI2 ((uint8_t)0x00U) /*!< AF0: SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF0_TIM1 ((uint8_t)0x00U) /*!< AF0: TIM1 Alternate Function mapping */
+#define GPIO_AF0_TIM3 ((uint8_t)0x00U) /*!< AF0: TIM3 Alternate Function mapping */
+#define GPIO_AF0_TIM14 ((uint8_t)0x00U) /*!< AF0: TIM14 Alternate Function mapping */
+#define GPIO_AF0_TIM15 ((uint8_t)0x00U) /*!< AF0: TIM15 Alternate Function mapping */
+#define GPIO_AF0_TIM16 ((uint8_t)0x00U) /*!< AF0: TIM16 Alternate Function mapping */
+#define GPIO_AF0_TIM17 ((uint8_t)0x00U) /*!< AF0: TIM17 Alternate Function mapping */
+#define GPIO_AF0_TSC ((uint8_t)0x00U) /*!< AF0: TSC Alternate Function mapping */
+#define GPIO_AF0_USART1 ((uint8_t)0x00U) /*!< AF0: USART1 Alternate Function mapping */
+#define GPIO_AF0_USART2 ((uint8_t)0x00U) /*!< AF0: USART2 Alternate Function mapping */
+#define GPIO_AF0_USART3 ((uint8_t)0x00U) /*!< AF0: USART3 Alternate Function mapping */
+#define GPIO_AF0_USART4 ((uint8_t)0x00U) /*!< AF0: USART4 Alternate Function mapping */
+
+/* AF 1 */
+#define GPIO_AF1_TIM3 ((uint8_t)0x01U) /*!< AF1: TIM3 Alternate Function mapping */
+#define GPIO_AF1_TIM15 ((uint8_t)0x01U) /*!< AF1: TIM15 Alternate Function mapping */
+#define GPIO_AF1_USART1 ((uint8_t)0x01U) /*!< AF1: USART1 Alternate Function mapping */
+#define GPIO_AF1_USART2 ((uint8_t)0x01U) /*!< AF1: USART2 Alternate Function mapping */
+#define GPIO_AF1_USART3 ((uint8_t)0x01U) /*!< AF1: USART3 Alternate Function mapping */
+#define GPIO_AF1_IR ((uint8_t)0x01U) /*!< AF1: IR Alternate Function mapping */
+#define GPIO_AF1_CEC ((uint8_t)0x01U) /*!< AF1: CEC Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01U) /*!< AF1: EVENTOUT Alternate Function mapping */
+#define GPIO_AF1_I2C1 ((uint8_t)0x01U) /*!< AF1: I2C1 Alternate Function mapping */
+#define GPIO_AF1_I2C2 ((uint8_t)0x01U) /*!< AF1: I2C2 Alternate Function mapping */
+#define GPIO_AF1_TSC ((uint8_t)0x01U) /*!< AF1: TSC Alternate Function mapping */
+#define GPIO_AF1_SPI1 ((uint8_t)0x01U) /*!< AF1: SPI1 Alternate Function mapping */
+#define GPIO_AF1_SPI2 ((uint8_t)0x01U) /*!< AF1: SPI2 Alternate Function mapping */
+
+/* AF 2 */
+#define GPIO_AF2_TIM1 ((uint8_t)0x02U) /*!< AF2: TIM1 Alternate Function mapping */
+#define GPIO_AF2_TIM2 ((uint8_t)0x02U) /*!< AF2: TIM2 Alternate Function mapping */
+#define GPIO_AF2_TIM16 ((uint8_t)0x02U) /*!< AF2: TIM16 Alternate Function mapping */
+#define GPIO_AF2_TIM17 ((uint8_t)0x02U) /*!< AF2: TIM17 Alternate Function mapping */
+#define GPIO_AF2_EVENTOUT ((uint8_t)0x02U) /*!< AF2: EVENTOUT Alternate Function mapping */
+
+/* AF 3 */
+#define GPIO_AF3_EVENTOUT ((uint8_t)0x03U) /*!< AF3: EVENTOUT Alternate Function mapping */
+#define GPIO_AF3_TSC ((uint8_t)0x03U) /*!< AF3: TSC Alternate Function mapping */
+#define GPIO_AF3_TIM15 ((uint8_t)0x03U) /*!< AF3: TIM15 Alternate Function mapping */
+#define GPIO_AF3_I2C1 ((uint8_t)0x03U) /*!< AF3: I2C1 Alternate Function mapping */
+
+/* AF 4 */
+#define GPIO_AF4_TIM14 ((uint8_t)0x04U) /*!< AF4: TIM14 Alternate Function mapping */
+#define GPIO_AF4_USART4 ((uint8_t)0x04U) /*!< AF4: USART4 Alternate Function mapping */
+#define GPIO_AF4_USART3 ((uint8_t)0x04U) /*!< AF4: USART3 Alternate Function mapping */
+#define GPIO_AF4_CRS ((uint8_t)0x04U) /*!< AF4: CRS Alternate Function mapping */
+
+/* AF 5 */
+#define GPIO_AF5_TIM15 ((uint8_t)0x05U) /*!< AF5: TIM15 Alternate Function mapping */
+#define GPIO_AF5_TIM16 ((uint8_t)0x05U) /*!< AF5: TIM16 Alternate Function mapping */
+#define GPIO_AF5_TIM17 ((uint8_t)0x05U) /*!< AF5: TIM17 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05U) /*!< AF5: SPI2 Alternate Function mapping */
+#define GPIO_AF5_I2C2 ((uint8_t)0x05U) /*!< AF5: I2C2 Alternate Function mapping */
+
+/* AF 6 */
+#define GPIO_AF6_EVENTOUT ((uint8_t)0x06U) /*!< AF6: EVENTOUT Alternate Function mapping */
+
+/* AF 7 */
+#define GPIO_AF7_COMP1 ((uint8_t)0x07U) /*!< AF7: COMP1 Alternate Function mapping */
+#define GPIO_AF7_COMP2 ((uint8_t)0x07U) /*!< AF7: COMP2 Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x07U)
+
+#endif /* STM32F071xB */
+
+
+#if defined(STM32F091xC) || defined(STM32F098xx)
+/*--------------------------- STM32F091xC || STM32F098xx ------------------------------*/
+/* AF 0 */
+#define GPIO_AF0_EVENTOUT ((uint8_t)0x00U) /*!< AF0: EVENTOUT Alternate Function mapping */
+#define GPIO_AF0_SWDIO ((uint8_t)0x00U) /*!< AF0: SWDIO Alternate Function mapping */
+#define GPIO_AF0_SWCLK ((uint8_t)0x00U) /*!< AF0: SWCLK Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00U) /*!< AF0: MCO Alternate Function mapping */
+#define GPIO_AF0_CEC ((uint8_t)0x00U) /*!< AF0: CEC Alternate Function mapping */
+#define GPIO_AF0_CRS ((uint8_t)0x00U) /*!< AF0: CRS Alternate Function mapping */
+#define GPIO_AF0_IR ((uint8_t)0x00U) /*!< AF0: IR Alternate Function mapping */
+#define GPIO_AF0_SPI1 ((uint8_t)0x00U) /*!< AF0: SPI1/I2S1 Alternate Function mapping */
+#define GPIO_AF0_SPI2 ((uint8_t)0x00U) /*!< AF0: SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF0_TIM1 ((uint8_t)0x00U) /*!< AF0: TIM1 Alternate Function mapping */
+#define GPIO_AF0_TIM3 ((uint8_t)0x00U) /*!< AF0: TIM3 Alternate Function mapping */
+#define GPIO_AF0_TIM14 ((uint8_t)0x00U) /*!< AF0: TIM14 Alternate Function mapping */
+#define GPIO_AF0_TIM15 ((uint8_t)0x00U) /*!< AF0: TIM15 Alternate Function mapping */
+#define GPIO_AF0_TIM16 ((uint8_t)0x00U) /*!< AF0: TIM16 Alternate Function mapping */
+#define GPIO_AF0_TIM17 ((uint8_t)0x00U) /*!< AF0: TIM17 Alternate Function mapping */
+#define GPIO_AF0_TSC ((uint8_t)0x00U) /*!< AF0: TSC Alternate Function mapping */
+#define GPIO_AF0_USART1 ((uint8_t)0x00U) /*!< AF0: USART1 Alternate Function mapping */
+#define GPIO_AF0_USART2 ((uint8_t)0x00U) /*!< AF0: USART2 Alternate Function mapping */
+#define GPIO_AF0_USART3 ((uint8_t)0x00U) /*!< AF0: USART3 Alternate Function mapping */
+#define GPIO_AF0_USART4 ((uint8_t)0x00U) /*!< AF0: USART4 Alternate Function mapping */
+#define GPIO_AF0_USART8 ((uint8_t)0x00U) /*!< AF0: USART8 Alternate Function mapping */
+#define GPIO_AF0_CAN ((uint8_t)0x00U) /*!< AF0: CAN Alternate Function mapping */
+
+/* AF 1 */
+#define GPIO_AF1_TIM3 ((uint8_t)0x01U) /*!< AF1: TIM3 Alternate Function mapping */
+#define GPIO_AF1_TIM15 ((uint8_t)0x01U) /*!< AF1: TIM15 Alternate Function mapping */
+#define GPIO_AF1_USART1 ((uint8_t)0x01U) /*!< AF1: USART1 Alternate Function mapping */
+#define GPIO_AF1_USART2 ((uint8_t)0x01U) /*!< AF1: USART2 Alternate Function mapping */
+#define GPIO_AF1_USART3 ((uint8_t)0x01U) /*!< AF1: USART3 Alternate Function mapping */
+#define GPIO_AF1_USART4 ((uint8_t)0x01U) /*!< AF1: USART4 Alternate Function mapping */
+#define GPIO_AF1_USART5 ((uint8_t)0x01U) /*!< AF1: USART5 Alternate Function mapping */
+#define GPIO_AF1_USART6 ((uint8_t)0x01U) /*!< AF1: USART6 Alternate Function mapping */
+#define GPIO_AF1_USART7 ((uint8_t)0x01U) /*!< AF1: USART7 Alternate Function mapping */
+#define GPIO_AF1_USART8 ((uint8_t)0x01U) /*!< AF1: USART8 Alternate Function mapping */
+#define GPIO_AF1_IR ((uint8_t)0x01U) /*!< AF1: IR Alternate Function mapping */
+#define GPIO_AF1_CEC ((uint8_t)0x01U) /*!< AF1: CEC Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01U) /*!< AF1: EVENTOUT Alternate Function mapping */
+#define GPIO_AF1_I2C1 ((uint8_t)0x01U) /*!< AF1: I2C1 Alternate Function mapping */
+#define GPIO_AF1_I2C2 ((uint8_t)0x01U) /*!< AF1: I2C2 Alternate Function mapping */
+#define GPIO_AF1_TSC ((uint8_t)0x01U) /*!< AF1: TSC Alternate Function mapping */
+#define GPIO_AF1_SPI1 ((uint8_t)0x01U) /*!< AF1: SPI1 Alternate Function mapping */
+#define GPIO_AF1_SPI2 ((uint8_t)0x01U) /*!< AF1: SPI2 Alternate Function mapping */
+
+/* AF 2 */
+#define GPIO_AF2_TIM1 ((uint8_t)0x02U) /*!< AF2: TIM1 Alternate Function mapping */
+#define GPIO_AF2_TIM2 ((uint8_t)0x02U) /*!< AF2: TIM2 Alternate Function mapping */
+#define GPIO_AF2_TIM16 ((uint8_t)0x02U) /*!< AF2: TIM16 Alternate Function mapping */
+#define GPIO_AF2_TIM17 ((uint8_t)0x02U) /*!< AF2: TIM17 Alternate Function mapping */
+#define GPIO_AF2_EVENTOUT ((uint8_t)0x02U) /*!< AF2: EVENTOUT Alternate Function mapping */
+#define GPIO_AF2_USART5 ((uint8_t)0x02U) /*!< AF2: USART5 Alternate Function mapping */
+#define GPIO_AF2_USART6 ((uint8_t)0x02U) /*!< AF2: USART6 Alternate Function mapping */
+#define GPIO_AF2_USART7 ((uint8_t)0x02U) /*!< AF2: USART7 Alternate Function mapping */
+#define GPIO_AF2_USART8 ((uint8_t)0x02U) /*!< AF2: USART8 Alternate Function mapping */
+
+/* AF 3 */
+#define GPIO_AF3_EVENTOUT ((uint8_t)0x03U) /*!< AF3: EVENTOUT Alternate Function mapping */
+#define GPIO_AF3_TSC ((uint8_t)0x03U) /*!< AF3: TSC Alternate Function mapping */
+#define GPIO_AF3_TIM15 ((uint8_t)0x03U) /*!< AF3: TIM15 Alternate Function mapping */
+#define GPIO_AF3_I2C1 ((uint8_t)0x03U) /*!< AF3: I2C1 Alternate Function mapping */
+
+/* AF 4 */
+#define GPIO_AF4_TIM14 ((uint8_t)0x04U) /*!< AF4: TIM14 Alternate Function mapping */
+#define GPIO_AF4_USART4 ((uint8_t)0x04U) /*!< AF4: USART4 Alternate Function mapping */
+#define GPIO_AF4_USART3 ((uint8_t)0x04U) /*!< AF4: USART3 Alternate Function mapping */
+#define GPIO_AF4_CRS ((uint8_t)0x04U) /*!< AF4: CRS Alternate Function mapping */
+#define GPIO_AF4_CAN ((uint8_t)0x04U) /*!< AF4: CAN Alternate Function mapping */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04U) /*!< AF4: I2C1 Alternate Function mapping */
+#define GPIO_AF4_USART5 ((uint8_t)0x04U) /*!< AF4: USART5 Alternate Function mapping */
+
+/* AF 5 */
+#define GPIO_AF5_TIM15 ((uint8_t)0x05U) /*!< AF5: TIM15 Alternate Function mapping */
+#define GPIO_AF5_TIM16 ((uint8_t)0x05U) /*!< AF5: TIM16 Alternate Function mapping */
+#define GPIO_AF5_TIM17 ((uint8_t)0x05U) /*!< AF5: TIM17 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05U) /*!< AF5: SPI2 Alternate Function mapping */
+#define GPIO_AF5_I2C2 ((uint8_t)0x05U) /*!< AF5: I2C2 Alternate Function mapping */
+#define GPIO_AF5_MCO ((uint8_t)0x05U) /*!< AF5: MCO Alternate Function mapping */
+#define GPIO_AF5_USART6 ((uint8_t)0x05U) /*!< AF5: USART6 Alternate Function mapping */
+
+/* AF 6 */
+#define GPIO_AF6_EVENTOUT ((uint8_t)0x06U) /*!< AF6: EVENTOUT Alternate Function mapping */
+
+/* AF 7 */
+#define GPIO_AF7_COMP1 ((uint8_t)0x07U) /*!< AF7: COMP1 Alternate Function mapping */
+#define GPIO_AF7_COMP2 ((uint8_t)0x07U) /*!< AF7: COMP2 Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x07U)
+
+#endif /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F030xC)
+/*--------------------------- STM32F030xC ----------------------------------------------------*/
+/* AF 0 */
+#define GPIO_AF0_EVENTOUT ((uint8_t)0x00U) /*!< AF0: EVENTOUT Alternate Function mapping */
+#define GPIO_AF0_SWDIO ((uint8_t)0x00U) /*!< AF0: SWDIO Alternate Function mapping */
+#define GPIO_AF0_SWCLK ((uint8_t)0x00U) /*!< AF0: SWCLK Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00U) /*!< AF0: MCO Alternate Function mapping */
+#define GPIO_AF0_IR ((uint8_t)0x00U) /*!< AF0: IR Alternate Function mapping */
+#define GPIO_AF0_SPI1 ((uint8_t)0x00U) /*!< AF0: SPI1 Alternate Function mapping */
+#define GPIO_AF0_SPI2 ((uint8_t)0x00U) /*!< AF0: SPI2 Alternate Function mapping */
+#define GPIO_AF0_TIM3 ((uint8_t)0x00U) /*!< AF0: TIM3 Alternate Function mapping */
+#define GPIO_AF0_TIM14 ((uint8_t)0x00U) /*!< AF0: TIM14 Alternate Function mapping */
+#define GPIO_AF0_TIM15 ((uint8_t)0x00U) /*!< AF0: TIM15 Alternate Function mapping */
+#define GPIO_AF0_TIM17 ((uint8_t)0x00U) /*!< AF0: TIM17 Alternate Function mapping */
+#define GPIO_AF0_USART1 ((uint8_t)0x00U) /*!< AF0: USART1 Alternate Function mapping */
+#define GPIO_AF0_USART4 ((uint8_t)0x00U) /*!< AF0: USART4 Alternate Function mapping */
+
+/* AF 1 */
+#define GPIO_AF1_TIM3 ((uint8_t)0x01U) /*!< AF1: TIM3 Alternate Function mapping */
+#define GPIO_AF1_TIM15 ((uint8_t)0x01U) /*!< AF1: TIM15 Alternate Function mapping */
+#define GPIO_AF1_USART1 ((uint8_t)0x01U) /*!< AF1: USART1 Alternate Function mapping */
+#define GPIO_AF1_USART2 ((uint8_t)0x01U) /*!< AF1: USART2 Alternate Function mapping */
+#define GPIO_AF1_USART3 ((uint8_t)0x01U) /*!< AF1: USART3 Alternate Function mapping */
+#define GPIO_AF1_IR ((uint8_t)0x01U) /*!< AF1: IR Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01U) /*!< AF1: EVENTOUT Alternate Function mapping */
+#define GPIO_AF1_I2C1 ((uint8_t)0x01U) /*!< AF1: I2C1 Alternate Function mapping */
+#define GPIO_AF1_I2C2 ((uint8_t)0x01U) /*!< AF1: I2C2 Alternate Function mapping */
+#define GPIO_AF1_SPI2 ((uint8_t)0x01U) /*!< AF1: SPI2 Alternate Function mapping */
+
+/* AF 2 */
+#define GPIO_AF2_TIM1 ((uint8_t)0x02U) /*!< AF2: TIM1 Alternate Function mapping */
+#define GPIO_AF2_TIM16 ((uint8_t)0x02U) /*!< AF2: TIM16 Alternate Function mapping */
+#define GPIO_AF2_TIM17 ((uint8_t)0x02U) /*!< AF2: TIM17 Alternate Function mapping */
+#define GPIO_AF2_EVENTOUT ((uint8_t)0x02U) /*!< AF2: EVENTOUT Alternate Function mapping */
+#define GPIO_AF2_USART5 ((uint8_t)0x02U) /*!< AF2: USART5 Alternate Function mapping */
+#define GPIO_AF2_USART6 ((uint8_t)0x02U) /*!< AF2: USART6 Alternate Function mapping */
+
+/* AF 3 */
+#define GPIO_AF3_EVENTOUT ((uint8_t)0x03U) /*!< AF3: EVENTOUT Alternate Function mapping */
+#define GPIO_AF3_TIM15 ((uint8_t)0x03U) /*!< AF3: TIM15 Alternate Function mapping */
+#define GPIO_AF3_I2C1 ((uint8_t)0x03U) /*!< AF3: I2C1 Alternate Function mapping */
+
+/* AF 4 */
+#define GPIO_AF4_TIM14 ((uint8_t)0x04U) /*!< AF4: TIM14 Alternate Function mapping */
+#define GPIO_AF4_USART4 ((uint8_t)0x04U) /*!< AF4: USART4 Alternate Function mapping */
+#define GPIO_AF4_USART3 ((uint8_t)0x04U) /*!< AF4: USART3 Alternate Function mapping */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04U) /*!< AF4: I2C1 Alternate Function mapping */
+#define GPIO_AF4_USART5 ((uint8_t)0x04U) /*!< AF4: USART5 Alternate Function mapping */
+
+/* AF 5 */
+#define GPIO_AF5_TIM15 ((uint8_t)0x05U) /*!< AF5: TIM15 Alternate Function mapping */
+#define GPIO_AF5_TIM16 ((uint8_t)0x05U) /*!< AF5: TIM16 Alternate Function mapping */
+#define GPIO_AF5_TIM17 ((uint8_t)0x05U) /*!< AF5: TIM17 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05U) /*!< AF5: SPI2 Alternate Function mapping */
+#define GPIO_AF5_I2C2 ((uint8_t)0x05U) /*!< AF5: I2C2 Alternate Function mapping */
+#define GPIO_AF5_MCO ((uint8_t)0x05U) /*!< AF5: MCO Alternate Function mapping */
+#define GPIO_AF5_USART6 ((uint8_t)0x05U) /*!< AF5: USART6 Alternate Function mapping */
+
+/* AF 6 */
+#define GPIO_AF6_EVENTOUT ((uint8_t)0x06U) /*!< AF6: EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x06U)
+
+#endif /* STM32F030xC */
+
+#if defined (STM32F072xB) || defined (STM32F078xx)
+/*--------------------------- STM32F072xB/STM32F078xx ---------------------------*/
+/* AF 0 */
+#define GPIO_AF0_EVENTOUT ((uint8_t)0x00U) /*!< AF0: EVENTOUT Alternate Function mapping */
+#define GPIO_AF0_SWDIO ((uint8_t)0x00U) /*!< AF0: SWDIO Alternate Function mapping */
+#define GPIO_AF0_SWCLK ((uint8_t)0x00U) /*!< AF0: SWCLK Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00U) /*!< AF0: MCO Alternate Function mapping */
+#define GPIO_AF0_CEC ((uint8_t)0x00U) /*!< AF0: CEC Alternate Function mapping */
+#define GPIO_AF0_CRS ((uint8_t)0x00U) /*!< AF0: CRS Alternate Function mapping */
+#define GPIO_AF0_IR ((uint8_t)0x00U) /*!< AF0: IR Alternate Function mapping */
+#define GPIO_AF0_SPI1 ((uint8_t)0x00U) /*!< AF0: SPI1/I2S1 Alternate Function mapping */
+#define GPIO_AF0_SPI2 ((uint8_t)0x00U) /*!< AF0: SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF0_TIM1 ((uint8_t)0x00U) /*!< AF0: TIM1 Alternate Function mapping */
+#define GPIO_AF0_TIM3 ((uint8_t)0x00U) /*!< AF0: TIM3 Alternate Function mapping */
+#define GPIO_AF0_TIM14 ((uint8_t)0x00U) /*!< AF0: TIM14 Alternate Function mapping */
+#define GPIO_AF0_TIM15 ((uint8_t)0x00U) /*!< AF0: TIM15 Alternate Function mapping */
+#define GPIO_AF0_TIM16 ((uint8_t)0x00U) /*!< AF0: TIM16 Alternate Function mapping */
+#define GPIO_AF0_TIM17 ((uint8_t)0x00U) /*!< AF0: TIM17 Alternate Function mapping */
+#define GPIO_AF0_TSC ((uint8_t)0x00U) /*!< AF0: TSC Alternate Function mapping */
+#define GPIO_AF0_USART1 ((uint8_t)0x00U) /*!< AF0: USART1 Alternate Function mapping */
+#define GPIO_AF0_USART2 ((uint8_t)0x00U) /*!< AF0: USART2 Alternate Function mapping */
+#define GPIO_AF0_USART3 ((uint8_t)0x00U) /*!< AF0: USART2 Alternate Function mapping */
+#define GPIO_AF0_USART4 ((uint8_t)0x00U) /*!< AF0: USART4 Alternate Function mapping */
+#define GPIO_AF0_CAN ((uint8_t)0x00U) /*!< AF0: CAN Alternate Function mapping */
+
+/* AF 1 */
+#define GPIO_AF1_TIM3 ((uint8_t)0x01U) /*!< AF1: TIM3 Alternate Function mapping */
+#define GPIO_AF1_TIM15 ((uint8_t)0x01U) /*!< AF1: TIM15 Alternate Function mapping */
+#define GPIO_AF1_USART1 ((uint8_t)0x01U) /*!< AF1: USART1 Alternate Function mapping */
+#define GPIO_AF1_USART2 ((uint8_t)0x01U) /*!< AF1: USART2 Alternate Function mapping */
+#define GPIO_AF1_USART3 ((uint8_t)0x01U) /*!< AF1: USART3 Alternate Function mapping */
+#define GPIO_AF1_IR ((uint8_t)0x01U) /*!< AF1: IR Alternate Function mapping */
+#define GPIO_AF1_CEC ((uint8_t)0x01U) /*!< AF1: CEC Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01U) /*!< AF1: EVENTOUT Alternate Function mapping */
+#define GPIO_AF1_I2C1 ((uint8_t)0x01U) /*!< AF1: I2C1 Alternate Function mapping */
+#define GPIO_AF1_I2C2 ((uint8_t)0x01U) /*!< AF1: I2C1 Alternate Function mapping */
+#define GPIO_AF1_TSC ((uint8_t)0x01U) /*!< AF1: I2C1 Alternate Function mapping */
+#define GPIO_AF1_SPI1 ((uint8_t)0x01U) /*!< AF1: SPI1 Alternate Function mapping */
+#define GPIO_AF1_SPI2 ((uint8_t)0x01U) /*!< AF1: SPI2 Alternate Function mapping */
+
+/* AF 2 */
+#define GPIO_AF2_TIM1 ((uint8_t)0x02U) /*!< AF2: TIM1 Alternate Function mapping */
+#define GPIO_AF2_TIM2 ((uint8_t)0x02U) /*!< AF2: TIM2 Alternate Function mapping */
+#define GPIO_AF2_TIM16 ((uint8_t)0x02U) /*!< AF2: TIM16 Alternate Function mapping */
+#define GPIO_AF2_TIM17 ((uint8_t)0x02U) /*!< AF2: TIM17 Alternate Function mapping */
+#define GPIO_AF2_EVENTOUT ((uint8_t)0x02U) /*!< AF2: EVENTOUT Alternate Function mapping */
+#define GPIO_AF2_USB ((uint8_t)0x02U) /*!< AF2: USB Alternate Function mapping */
+
+/* AF 3 */
+#define GPIO_AF3_EVENTOUT ((uint8_t)0x03U) /*!< AF3: EVENTOUT Alternate Function mapping */
+#define GPIO_AF3_TSC ((uint8_t)0x03U) /*!< AF3: TSC Alternate Function mapping */
+#define GPIO_AF3_TIM15 ((uint8_t)0x03U) /*!< AF3: TIM15 Alternate Function mapping */
+#define GPIO_AF3_I2C1 ((uint8_t)0x03U) /*!< AF3: I2C1 Alternate Function mapping */
+
+/* AF 4 */
+#define GPIO_AF4_TIM14 ((uint8_t)0x04U) /*!< AF4: TIM14 Alternate Function mapping */
+#define GPIO_AF4_USART4 ((uint8_t)0x04U) /*!< AF4: USART4 Alternate Function mapping */
+#define GPIO_AF4_USART3 ((uint8_t)0x04U) /*!< AF4: USART3 Alternate Function mapping */
+#define GPIO_AF4_CRS ((uint8_t)0x04U) /*!< AF4: CRS Alternate Function mapping */
+#define GPIO_AF4_CAN ((uint8_t)0x04U) /*!< AF4: CAN Alternate Function mapping */
+
+/* AF 5 */
+#define GPIO_AF5_TIM15 ((uint8_t)0x05U) /*!< AF5: TIM15 Alternate Function mapping */
+#define GPIO_AF5_TIM16 ((uint8_t)0x05U) /*!< AF5: TIM16 Alternate Function mapping */
+#define GPIO_AF5_TIM17 ((uint8_t)0x05U) /*!< AF5: TIM17 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05U) /*!< AF5: SPI2 Alternate Function mapping */
+#define GPIO_AF5_I2C2 ((uint8_t)0x05U) /*!< AF5: I2C2 Alternate Function mapping */
+
+/* AF 6 */
+#define GPIO_AF6_EVENTOUT ((uint8_t)0x06U) /*!< AF6: EVENTOUT Alternate Function mapping */
+
+/* AF 7 */
+#define GPIO_AF7_COMP1 ((uint8_t)0x07U) /*!< AF7: COMP1 Alternate Function mapping */
+#define GPIO_AF7_COMP2 ((uint8_t)0x07U) /*!< AF7: COMP2 Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x07U)
+
+#endif /* STM32F072xB || STM32F078xx */
+
+#if defined (STM32F070xB)
+/*---------------------------------- STM32F070xB ---------------------------------------------*/
+/* AF 0 */
+#define GPIO_AF0_EVENTOUT ((uint8_t)0x00U) /*!< AF0: EVENTOUT Alternate Function mapping */
+#define GPIO_AF0_SWDIO ((uint8_t)0x00U) /*!< AF0: SWDIO Alternate Function mapping */
+#define GPIO_AF0_SWCLK ((uint8_t)0x00U) /*!< AF0: SWCLK Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00U) /*!< AF0: MCO Alternate Function mapping */
+#define GPIO_AF0_IR ((uint8_t)0x00U) /*!< AF0: IR Alternate Function mapping */
+#define GPIO_AF0_SPI1 ((uint8_t)0x00U) /*!< AF0: SPI1 Alternate Function mapping */
+#define GPIO_AF0_SPI2 ((uint8_t)0x00U) /*!< AF0: SPI2 Alternate Function mapping */
+#define GPIO_AF0_TIM3 ((uint8_t)0x00U) /*!< AF0: TIM3 Alternate Function mapping */
+#define GPIO_AF0_TIM14 ((uint8_t)0x00U) /*!< AF0: TIM14 Alternate Function mapping */
+#define GPIO_AF0_TIM15 ((uint8_t)0x00U) /*!< AF0: TIM15 Alternate Function mapping */
+#define GPIO_AF0_TIM17 ((uint8_t)0x00U) /*!< AF0: TIM17 Alternate Function mapping */
+#define GPIO_AF0_USART1 ((uint8_t)0x00U) /*!< AF0: USART1 Alternate Function mapping */
+#define GPIO_AF0_USART4 ((uint8_t)0x00U) /*!< AF0: USART4 Alternate Function mapping */
+
+/* AF 1 */
+#define GPIO_AF1_TIM3 ((uint8_t)0x01U) /*!< AF1: TIM3 Alternate Function mapping */
+#define GPIO_AF1_TIM15 ((uint8_t)0x01U) /*!< AF1: TIM15 Alternate Function mapping */
+#define GPIO_AF1_USART1 ((uint8_t)0x01U) /*!< AF1: USART1 Alternate Function mapping */
+#define GPIO_AF1_USART2 ((uint8_t)0x01U) /*!< AF1: USART2 Alternate Function mapping */
+#define GPIO_AF1_USART3 ((uint8_t)0x01U) /*!< AF1: USART4 Alternate Function mapping */
+#define GPIO_AF1_IR ((uint8_t)0x01U) /*!< AF1: IR Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01U) /*!< AF1: EVENTOUT Alternate Function mapping */
+#define GPIO_AF1_I2C1 ((uint8_t)0x01U) /*!< AF1: I2C1 Alternate Function mapping */
+#define GPIO_AF1_I2C2 ((uint8_t)0x01U) /*!< AF1: I2C1 Alternate Function mapping */
+#define GPIO_AF1_SPI2 ((uint8_t)0x01U) /*!< AF1: SPI2 Alternate Function mapping */
+
+/* AF 2 */
+#define GPIO_AF2_TIM1 ((uint8_t)0x02U) /*!< AF2: TIM1 Alternate Function mapping */
+#define GPIO_AF2_TIM16 ((uint8_t)0x02U) /*!< AF2: TIM16 Alternate Function mapping */
+#define GPIO_AF2_TIM17 ((uint8_t)0x02U) /*!< AF2: TIM17 Alternate Function mapping */
+#define GPIO_AF2_EVENTOUT ((uint8_t)0x02U) /*!< AF2: EVENTOUT Alternate Function mapping */
+#define GPIO_AF2_USB ((uint8_t)0x02U) /*!< AF2: USB Alternate Function mapping */
+
+/* AF 3 */
+#define GPIO_AF3_EVENTOUT ((uint8_t)0x03U) /*!< AF3: EVENTOUT Alternate Function mapping */
+#define GPIO_AF3_I2C1 ((uint8_t)0x03U) /*!< AF3: I2C1 Alternate Function mapping */
+#define GPIO_AF3_TIM15 ((uint8_t)0x03U) /*!< AF3: TIM15 Alternate Function mapping */
+
+/* AF 4 */
+#define GPIO_AF4_TIM14 ((uint8_t)0x04U) /*!< AF4: TIM14 Alternate Function mapping */
+#define GPIO_AF4_USART4 ((uint8_t)0x04U) /*!< AF4: USART4 Alternate Function mapping */
+#define GPIO_AF4_USART3 ((uint8_t)0x04U) /*!< AF4: USART3 Alternate Function mapping */
+
+/* AF 5 */
+#define GPIO_AF5_TIM15 ((uint8_t)0x05U) /*!< AF5: TIM15 Alternate Function mapping */
+#define GPIO_AF5_TIM16 ((uint8_t)0x05U) /*!< AF5: TIM16 Alternate Function mapping */
+#define GPIO_AF5_TIM17 ((uint8_t)0x05U) /*!< AF5: TIM17 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05U) /*!< AF5: SPI2 Alternate Function mapping */
+#define GPIO_AF5_I2C2 ((uint8_t)0x05U) /*!< AF5: I2C2 Alternate Function mapping */
+
+/* AF 6 */
+#define GPIO_AF6_EVENTOUT ((uint8_t)0x06U) /*!< AF6: EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x06U)
+
+#endif /* STM32F070xB */
+
+#if defined (STM32F042x6) || defined (STM32F048xx)
+/*--------------------------- STM32F042x6/STM32F048xx ---------------------------*/
+/* AF 0 */
+#define GPIO_AF0_EVENTOUT ((uint8_t)0x00U) /*!< AF0: EVENTOUT Alternate Function mapping */
+#define GPIO_AF0_CEC ((uint8_t)0x00U) /*!< AF0: CEC Alternate Function mapping */
+#define GPIO_AF0_CRS ((uint8_t)0x00U) /*!< AF0: CRS Alternate Function mapping */
+#define GPIO_AF0_IR ((uint8_t)0x00U) /*!< AF0: IR Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00U) /*!< AF0: MCO Alternate Function mapping */
+#define GPIO_AF0_SPI1 ((uint8_t)0x00U) /*!< AF0: SPI1/I2S1 Alternate Function mapping */
+#define GPIO_AF0_SPI2 ((uint8_t)0x00U) /*!< AF0: SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF0_SWDIO ((uint8_t)0x00U) /*!< AF0: SWDIO Alternate Function mapping */
+#define GPIO_AF0_SWCLK ((uint8_t)0x00U) /*!< AF0: SWCLK Alternate Function mapping */
+#define GPIO_AF0_TIM14 ((uint8_t)0x00U) /*!< AF0: TIM14 Alternate Function mapping */
+#define GPIO_AF0_TIM17 ((uint8_t)0x00U) /*!< AF0: TIM17 Alternate Function mapping */
+#define GPIO_AF0_USART1 ((uint8_t)0x00U) /*!< AF0: USART1 Alternate Function mapping */
+
+/* AF 1 */
+#define GPIO_AF1_CEC ((uint8_t)0x01U) /*!< AF1: CEC Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01U) /*!< AF1: EVENTOUT Alternate Function mapping */
+#define GPIO_AF1_I2C1 ((uint8_t)0x01U) /*!< AF1: I2C1 Alternate Function mapping */
+#define GPIO_AF1_IR ((uint8_t)0x01U) /*!< AF1: IR Alternate Function mapping */
+#define GPIO_AF1_USART1 ((uint8_t)0x01U) /*!< AF1: USART1 Alternate Function mapping */
+#define GPIO_AF1_USART2 ((uint8_t)0x01U) /*!< AF1: USART2 Alternate Function mapping */
+#define GPIO_AF1_TIM3 ((uint8_t)0x01U) /*!< AF1: TIM3 Alternate Function mapping */
+
+/* AF 2 */
+#define GPIO_AF2_EVENTOUT ((uint8_t)0x02U) /*!< AF2: EVENTOUT Alternate Function mapping */
+#define GPIO_AF2_TIM1 ((uint8_t)0x02U) /*!< AF2: TIM1 Alternate Function mapping */
+#define GPIO_AF2_TIM2 ((uint8_t)0x02U) /*!< AF2: TIM2 Alternate Function mapping */
+#define GPIO_AF2_TIM16 ((uint8_t)0x02U) /*!< AF2: TIM16 Alternate Function mapping */
+#define GPIO_AF2_TIM17 ((uint8_t)0x02U) /*!< AF2: TIM17 Alternate Function mapping */
+#define GPIO_AF2_USB ((uint8_t)0x02U) /*!< AF2: USB Alternate Function mapping */
+
+/* AF 3 */
+#define GPIO_AF3_EVENTOUT ((uint8_t)0x03U) /*!< AF3: EVENTOUT Alternate Function mapping */
+#define GPIO_AF3_I2C1 ((uint8_t)0x03U) /*!< AF3: I2C1 Alternate Function mapping */
+#define GPIO_AF3_TSC ((uint8_t)0x03U) /*!< AF3: TSC Alternate Function mapping */
+
+/* AF 4 */
+#define GPIO_AF4_TIM14 ((uint8_t)0x04U) /*!< AF4: TIM14 Alternate Function mapping */
+#define GPIO_AF4_CAN ((uint8_t)0x04U) /*!< AF4: CAN Alternate Function mapping */
+#define GPIO_AF4_CRS ((uint8_t)0x04U) /*!< AF4: CRS Alternate Function mapping */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04U) /*!< AF4: I2C1 Alternate Function mapping */
+
+/* AF 5 */
+#define GPIO_AF5_MCO ((uint8_t)0x05U) /*!< AF5: MCO Alternate Function mapping */
+#define GPIO_AF5_I2C1 ((uint8_t)0x05U) /*!< AF5: I2C1 Alternate Function mapping */
+#define GPIO_AF5_I2C2 ((uint8_t)0x05U) /*!< AF5: I2C2 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05U) /*!< AF5: SPI2 Alternate Function mapping */
+#define GPIO_AF5_TIM16 ((uint8_t)0x05U) /*!< AF5: TIM16 Alternate Function mapping */
+#define GPIO_AF5_TIM17 ((uint8_t)0x05U) /*!< AF5: TIM17 Alternate Function mapping */
+#define GPIO_AF5_USB ((uint8_t)0x05U) /*!< AF5: USB Alternate Function mapping */
+
+/* AF 6 */
+#define GPIO_AF6_EVENTOUT ((uint8_t)0x06U) /*!< AF6: EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x06U)
+
+#endif /* STM32F042x6 || STM32F048xx */
+
+#if defined (STM32F070x6)
+/*--------------------------------------- STM32F070x6 ----------------------------------------*/
+/* AF 0 */
+#define GPIO_AF0_EVENTOUT ((uint8_t)0x00U) /*!< AF0: EVENTOUT Alternate Function mapping */
+#define GPIO_AF0_IR ((uint8_t)0x00U) /*!< AF0: IR Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00U) /*!< AF0: MCO Alternate Function mapping */
+#define GPIO_AF0_SPI1 ((uint8_t)0x00U) /*!< AF0: SPI1 Alternate Function mapping */
+#define GPIO_AF0_SWDIO ((uint8_t)0x00U) /*!< AF0: SWDIO Alternate Function mapping */
+#define GPIO_AF0_SWCLK ((uint8_t)0x00U) /*!< AF0: SWCLK Alternate Function mapping */
+#define GPIO_AF0_TIM14 ((uint8_t)0x00U) /*!< AF0: TIM14 Alternate Function mapping */
+#define GPIO_AF0_TIM17 ((uint8_t)0x00U) /*!< AF0: TIM17 Alternate Function mapping */
+#define GPIO_AF0_USART1 ((uint8_t)0x00U) /*!< AF0: USART1 Alternate Function mapping */
+
+/* AF 1 */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01U) /*!< AF1: EVENTOUT Alternate Function mapping */
+#define GPIO_AF1_I2C1 ((uint8_t)0x01U) /*!< AF1: I2C1 Alternate Function mapping */
+#define GPIO_AF1_IR ((uint8_t)0x01U) /*!< AF1: IR Alternate Function mapping */
+#define GPIO_AF1_USART1 ((uint8_t)0x01U) /*!< AF1: USART1 Alternate Function mapping */
+#define GPIO_AF1_USART2 ((uint8_t)0x01U) /*!< AF1: USART2 Alternate Function mapping */
+#define GPIO_AF1_TIM3 ((uint8_t)0x01U) /*!< AF1: TIM3 Alternate Function mapping */
+
+/* AF 2 */
+#define GPIO_AF2_EVENTOUT ((uint8_t)0x02U) /*!< AF2: EVENTOUT Alternate Function mapping */
+#define GPIO_AF2_TIM1 ((uint8_t)0x02U) /*!< AF2: TIM1 Alternate Function mapping */
+#define GPIO_AF2_TIM16 ((uint8_t)0x02U) /*!< AF2: TIM16 Alternate Function mapping */
+#define GPIO_AF2_TIM17 ((uint8_t)0x02U) /*!< AF2: TIM17 Alternate Function mapping */
+#define GPIO_AF2_USB ((uint8_t)0x02U) /*!< AF2: USB Alternate Function mapping */
+
+/* AF 3 */
+#define GPIO_AF3_EVENTOUT ((uint8_t)0x03U) /*!< AF3: EVENTOUT Alternate Function mapping */
+#define GPIO_AF3_I2C1 ((uint8_t)0x03U) /*!< AF3: I2C1 Alternate Function mapping */
+
+/* AF 4 */
+#define GPIO_AF4_TIM14 ((uint8_t)0x04U) /*!< AF4: TIM14 Alternate Function mapping */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04U) /*!< AF4: I2C1 Alternate Function mapping */
+
+/* AF 5 */
+#define GPIO_AF5_MCO ((uint8_t)0x05U) /*!< AF5: MCO Alternate Function mapping */
+#define GPIO_AF5_I2C1 ((uint8_t)0x05U) /*!< AF5: I2C1 Alternate Function mapping */
+#define GPIO_AF5_TIM16 ((uint8_t)0x05U) /*!< AF5: TIM16 Alternate Function mapping */
+#define GPIO_AF5_TIM17 ((uint8_t)0x05U) /*!< AF5: TIM17 Alternate Function mapping */
+#define GPIO_AF5_USB ((uint8_t)0x05U) /*!< AF5: USB Alternate Function mapping */
+
+/* AF 6 */
+#define GPIO_AF6_EVENTOUT ((uint8_t)0x06U) /*!< AF6: EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x06U)
+
+#endif /* STM32F070x6 */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup GPIOEx_Exported_Macros GPIOEx Exported Macros
+ * @{
+ */
+
+/** @defgroup GPIOEx_Get_Port_Index GPIOEx_Get Port Index
+* @{
+ */
+#if defined(GPIOD) && defined(GPIOE)
+#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0U :\
+ ((__GPIOx__) == (GPIOB))? 1U :\
+ ((__GPIOx__) == (GPIOC))? 2U :\
+ ((__GPIOx__) == (GPIOD))? 3U :\
+ ((__GPIOx__) == (GPIOE))? 4U : 5U)
+#endif
+
+#if defined(GPIOD) && !defined(GPIOE)
+#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0U :\
+ ((__GPIOx__) == (GPIOB))? 1U :\
+ ((__GPIOx__) == (GPIOC))? 2U :\
+ ((__GPIOx__) == (GPIOD))? 3U : 5U)
+#endif
+
+#if !defined(GPIOD) && defined(GPIOE)
+#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0U :\
+ ((__GPIOx__) == (GPIOB))? 1U :\
+ ((__GPIOx__) == (GPIOC))? 2U :\
+ ((__GPIOx__) == (GPIOE))? 4U : 5U)
+#endif
+
+#if !defined(GPIOD) && !defined(GPIOE)
+#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0U :\
+ ((__GPIOx__) == (GPIOB))? 1U :\
+ ((__GPIOx__) == (GPIOC))? 2U : 5U)
+#endif
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_GPIO_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h
new file mode 100644
index 0000000..d61df7e
--- /dev/null
+++ b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h
@@ -0,0 +1,782 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_i2c.h
+ * @author MCD Application Team
+ * @brief Header file of I2C HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32F0xx_HAL_I2C_H
+#define STM32F0xx_HAL_I2C_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup I2C
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup I2C_Exported_Types I2C Exported Types
+ * @{
+ */
+
+/** @defgroup I2C_Configuration_Structure_definition I2C Configuration Structure definition
+ * @brief I2C Configuration Structure definition
+ * @{
+ */
+typedef struct
+{
+ uint32_t Timing; /*!< Specifies the I2C_TIMINGR_register value.
+ This parameter calculated by referring to I2C initialization
+ section in Reference manual */
+
+ uint32_t OwnAddress1; /*!< Specifies the first device own address.
+ This parameter can be a 7-bit or 10-bit address. */
+
+ uint32_t AddressingMode; /*!< Specifies if 7-bit or 10-bit addressing mode is selected.
+ This parameter can be a value of @ref I2C_ADDRESSING_MODE */
+
+ uint32_t DualAddressMode; /*!< Specifies if dual addressing mode is selected.
+ This parameter can be a value of @ref I2C_DUAL_ADDRESSING_MODE */
+
+ uint32_t OwnAddress2; /*!< Specifies the second device own address if dual addressing mode is selected
+ This parameter can be a 7-bit address. */
+
+ uint32_t OwnAddress2Masks; /*!< Specifies the acknowledge mask address second device own address if dual addressing mode is selected
+ This parameter can be a value of @ref I2C_OWN_ADDRESS2_MASKS */
+
+ uint32_t GeneralCallMode; /*!< Specifies if general call mode is selected.
+ This parameter can be a value of @ref I2C_GENERAL_CALL_ADDRESSING_MODE */
+
+ uint32_t NoStretchMode; /*!< Specifies if nostretch mode is selected.
+ This parameter can be a value of @ref I2C_NOSTRETCH_MODE */
+
+} I2C_InitTypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_state_structure_definition HAL state structure definition
+ * @brief HAL State structure definition
+ * @note HAL I2C State value coding follow below described bitmap :\n
+ * b7-b6 Error information\n
+ * 00 : No Error\n
+ * 01 : Abort (Abort user request on going)\n
+ * 10 : Timeout\n
+ * 11 : Error\n
+ * b5 Peripheral initialization status\n
+ * 0 : Reset (peripheral not initialized)\n
+ * 1 : Init done (peripheral initialized and ready to use. HAL I2C Init function called)\n
+ * b4 (not used)\n
+ * x : Should be set to 0\n
+ * b3\n
+ * 0 : Ready or Busy (No Listen mode ongoing)\n
+ * 1 : Listen (peripheral in Address Listen Mode)\n
+ * b2 Intrinsic process state\n
+ * 0 : Ready\n
+ * 1 : Busy (peripheral busy with some configuration or internal operations)\n
+ * b1 Rx state\n
+ * 0 : Ready (no Rx operation ongoing)\n
+ * 1 : Busy (Rx operation ongoing)\n
+ * b0 Tx state\n
+ * 0 : Ready (no Tx operation ongoing)\n
+ * 1 : Busy (Tx operation ongoing)
+ * @{
+ */
+typedef enum
+{
+ HAL_I2C_STATE_RESET = 0x00U, /*!< Peripheral is not yet Initialized */
+ HAL_I2C_STATE_READY = 0x20U, /*!< Peripheral Initialized and ready for use */
+ HAL_I2C_STATE_BUSY = 0x24U, /*!< An internal process is ongoing */
+ HAL_I2C_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing */
+ HAL_I2C_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing */
+ HAL_I2C_STATE_LISTEN = 0x28U, /*!< Address Listen Mode is ongoing */
+ HAL_I2C_STATE_BUSY_TX_LISTEN = 0x29U, /*!< Address Listen Mode and Data Transmission
+ process is ongoing */
+ HAL_I2C_STATE_BUSY_RX_LISTEN = 0x2AU, /*!< Address Listen Mode and Data Reception
+ process is ongoing */
+ HAL_I2C_STATE_ABORT = 0x60U, /*!< Abort user request ongoing */
+ HAL_I2C_STATE_TIMEOUT = 0xA0U, /*!< Timeout state */
+ HAL_I2C_STATE_ERROR = 0xE0U /*!< Error */
+
+} HAL_I2C_StateTypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_mode_structure_definition HAL mode structure definition
+ * @brief HAL Mode structure definition
+ * @note HAL I2C Mode value coding follow below described bitmap :\n
+ * b7 (not used)\n
+ * x : Should be set to 0\n
+ * b6\n
+ * 0 : None\n
+ * 1 : Memory (HAL I2C communication is in Memory Mode)\n
+ * b5\n
+ * 0 : None\n
+ * 1 : Slave (HAL I2C communication is in Slave Mode)\n
+ * b4\n
+ * 0 : None\n
+ * 1 : Master (HAL I2C communication is in Master Mode)\n
+ * b3-b2-b1-b0 (not used)\n
+ * xxxx : Should be set to 0000
+ * @{
+ */
+typedef enum
+{
+ HAL_I2C_MODE_NONE = 0x00U, /*!< No I2C communication on going */
+ HAL_I2C_MODE_MASTER = 0x10U, /*!< I2C communication is in Master Mode */
+ HAL_I2C_MODE_SLAVE = 0x20U, /*!< I2C communication is in Slave Mode */
+ HAL_I2C_MODE_MEM = 0x40U /*!< I2C communication is in Memory Mode */
+
+} HAL_I2C_ModeTypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup I2C_Error_Code_definition I2C Error Code definition
+ * @brief I2C Error Code definition
+ * @{
+ */
+#define HAL_I2C_ERROR_NONE (0x00000000U) /*!< No error */
+#define HAL_I2C_ERROR_BERR (0x00000001U) /*!< BERR error */
+#define HAL_I2C_ERROR_ARLO (0x00000002U) /*!< ARLO error */
+#define HAL_I2C_ERROR_AF (0x00000004U) /*!< ACKF error */
+#define HAL_I2C_ERROR_OVR (0x00000008U) /*!< OVR error */
+#define HAL_I2C_ERROR_DMA (0x00000010U) /*!< DMA transfer error */
+#define HAL_I2C_ERROR_TIMEOUT (0x00000020U) /*!< Timeout error */
+#define HAL_I2C_ERROR_SIZE (0x00000040U) /*!< Size Management error */
+#define HAL_I2C_ERROR_DMA_PARAM (0x00000080U) /*!< DMA Parameter Error */
+#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
+#define HAL_I2C_ERROR_INVALID_CALLBACK (0x00000100U) /*!< Invalid Callback error */
+#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
+#define HAL_I2C_ERROR_INVALID_PARAM (0x00000200U) /*!< Invalid Parameters error */
+/**
+ * @}
+ */
+
+/** @defgroup I2C_handle_Structure_definition I2C handle Structure definition
+ * @brief I2C handle Structure definition
+ * @{
+ */
+typedef struct __I2C_HandleTypeDef
+{
+ I2C_TypeDef *Instance; /*!< I2C registers base address */
+
+ I2C_InitTypeDef Init; /*!< I2C communication parameters */
+
+ uint8_t *pBuffPtr; /*!< Pointer to I2C transfer buffer */
+
+ uint16_t XferSize; /*!< I2C transfer size */
+
+ __IO uint16_t XferCount; /*!< I2C transfer counter */
+
+ __IO uint32_t XferOptions; /*!< I2C sequantial transfer options, this parameter can
+ be a value of @ref I2C_XFEROPTIONS */
+
+ __IO uint32_t PreviousState; /*!< I2C communication Previous state */
+
+ HAL_StatusTypeDef(*XferISR)(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources); /*!< I2C transfer IRQ handler function pointer */
+
+ DMA_HandleTypeDef *hdmatx; /*!< I2C Tx DMA handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /*!< I2C Rx DMA handle parameters */
+
+ HAL_LockTypeDef Lock; /*!< I2C locking object */
+
+ __IO HAL_I2C_StateTypeDef State; /*!< I2C communication state */
+
+ __IO HAL_I2C_ModeTypeDef Mode; /*!< I2C communication mode */
+
+ __IO uint32_t ErrorCode; /*!< I2C Error code */
+
+ __IO uint32_t AddrEventCount; /*!< I2C Address Event counter */
+
+#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
+ void (* MasterTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Master Tx Transfer completed callback */
+ void (* MasterRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Master Rx Transfer completed callback */
+ void (* SlaveTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Slave Tx Transfer completed callback */
+ void (* SlaveRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Slave Rx Transfer completed callback */
+ void (* ListenCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Listen Complete callback */
+ void (* MemTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Memory Tx Transfer completed callback */
+ void (* MemRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Memory Rx Transfer completed callback */
+ void (* ErrorCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Error callback */
+ void (* AbortCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Abort callback */
+
+ void (* AddrCallback)(struct __I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode); /*!< I2C Slave Address Match callback */
+
+ void (* MspInitCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Msp Init callback */
+ void (* MspDeInitCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Msp DeInit callback */
+
+#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
+} I2C_HandleTypeDef;
+
+#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
+/**
+ * @brief HAL I2C Callback ID enumeration definition
+ */
+typedef enum
+{
+ HAL_I2C_MASTER_TX_COMPLETE_CB_ID = 0x00U, /*!< I2C Master Tx Transfer completed callback ID */
+ HAL_I2C_MASTER_RX_COMPLETE_CB_ID = 0x01U, /*!< I2C Master Rx Transfer completed callback ID */
+ HAL_I2C_SLAVE_TX_COMPLETE_CB_ID = 0x02U, /*!< I2C Slave Tx Transfer completed callback ID */
+ HAL_I2C_SLAVE_RX_COMPLETE_CB_ID = 0x03U, /*!< I2C Slave Rx Transfer completed callback ID */
+ HAL_I2C_LISTEN_COMPLETE_CB_ID = 0x04U, /*!< I2C Listen Complete callback ID */
+ HAL_I2C_MEM_TX_COMPLETE_CB_ID = 0x05U, /*!< I2C Memory Tx Transfer callback ID */
+ HAL_I2C_MEM_RX_COMPLETE_CB_ID = 0x06U, /*!< I2C Memory Rx Transfer completed callback ID */
+ HAL_I2C_ERROR_CB_ID = 0x07U, /*!< I2C Error callback ID */
+ HAL_I2C_ABORT_CB_ID = 0x08U, /*!< I2C Abort callback ID */
+
+ HAL_I2C_MSPINIT_CB_ID = 0x09U, /*!< I2C Msp Init callback ID */
+ HAL_I2C_MSPDEINIT_CB_ID = 0x0AU /*!< I2C Msp DeInit callback ID */
+
+} HAL_I2C_CallbackIDTypeDef;
+
+/**
+ * @brief HAL I2C Callback pointer definition
+ */
+typedef void (*pI2C_CallbackTypeDef)(I2C_HandleTypeDef *hi2c); /*!< pointer to an I2C callback function */
+typedef void (*pI2C_AddrCallbackTypeDef)(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode); /*!< pointer to an I2C Address Match callback function */
+
+#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup I2C_Exported_Constants I2C Exported Constants
+ * @{
+ */
+
+/** @defgroup I2C_XFEROPTIONS I2C Sequential Transfer Options
+ * @{
+ */
+#define I2C_FIRST_FRAME ((uint32_t)I2C_SOFTEND_MODE)
+#define I2C_FIRST_AND_NEXT_FRAME ((uint32_t)(I2C_RELOAD_MODE | I2C_SOFTEND_MODE))
+#define I2C_NEXT_FRAME ((uint32_t)(I2C_RELOAD_MODE | I2C_SOFTEND_MODE))
+#define I2C_FIRST_AND_LAST_FRAME ((uint32_t)I2C_AUTOEND_MODE)
+#define I2C_LAST_FRAME ((uint32_t)I2C_AUTOEND_MODE)
+#define I2C_LAST_FRAME_NO_STOP ((uint32_t)I2C_SOFTEND_MODE)
+
+/* List of XferOptions in usage of :
+ * 1- Restart condition in all use cases (direction change or not)
+ */
+#define I2C_OTHER_FRAME (0x000000AAU)
+#define I2C_OTHER_AND_LAST_FRAME (0x0000AA00U)
+/**
+ * @}
+ */
+
+/** @defgroup I2C_ADDRESSING_MODE I2C Addressing Mode
+ * @{
+ */
+#define I2C_ADDRESSINGMODE_7BIT (0x00000001U)
+#define I2C_ADDRESSINGMODE_10BIT (0x00000002U)
+/**
+ * @}
+ */
+
+/** @defgroup I2C_DUAL_ADDRESSING_MODE I2C Dual Addressing Mode
+ * @{
+ */
+#define I2C_DUALADDRESS_DISABLE (0x00000000U)
+#define I2C_DUALADDRESS_ENABLE I2C_OAR2_OA2EN
+/**
+ * @}
+ */
+
+/** @defgroup I2C_OWN_ADDRESS2_MASKS I2C Own Address2 Masks
+ * @{
+ */
+#define I2C_OA2_NOMASK ((uint8_t)0x00U)
+#define I2C_OA2_MASK01 ((uint8_t)0x01U)
+#define I2C_OA2_MASK02 ((uint8_t)0x02U)
+#define I2C_OA2_MASK03 ((uint8_t)0x03U)
+#define I2C_OA2_MASK04 ((uint8_t)0x04U)
+#define I2C_OA2_MASK05 ((uint8_t)0x05U)
+#define I2C_OA2_MASK06 ((uint8_t)0x06U)
+#define I2C_OA2_MASK07 ((uint8_t)0x07U)
+/**
+ * @}
+ */
+
+/** @defgroup I2C_GENERAL_CALL_ADDRESSING_MODE I2C General Call Addressing Mode
+ * @{
+ */
+#define I2C_GENERALCALL_DISABLE (0x00000000U)
+#define I2C_GENERALCALL_ENABLE I2C_CR1_GCEN
+/**
+ * @}
+ */
+
+/** @defgroup I2C_NOSTRETCH_MODE I2C No-Stretch Mode
+ * @{
+ */
+#define I2C_NOSTRETCH_DISABLE (0x00000000U)
+#define I2C_NOSTRETCH_ENABLE I2C_CR1_NOSTRETCH
+/**
+ * @}
+ */
+
+/** @defgroup I2C_MEMORY_ADDRESS_SIZE I2C Memory Address Size
+ * @{
+ */
+#define I2C_MEMADD_SIZE_8BIT (0x00000001U)
+#define I2C_MEMADD_SIZE_16BIT (0x00000002U)
+/**
+ * @}
+ */
+
+/** @defgroup I2C_XFERDIRECTION I2C Transfer Direction Master Point of View
+ * @{
+ */
+#define I2C_DIRECTION_TRANSMIT (0x00000000U)
+#define I2C_DIRECTION_RECEIVE (0x00000001U)
+/**
+ * @}
+ */
+
+/** @defgroup I2C_RELOAD_END_MODE I2C Reload End Mode
+ * @{
+ */
+#define I2C_RELOAD_MODE I2C_CR2_RELOAD
+#define I2C_AUTOEND_MODE I2C_CR2_AUTOEND
+#define I2C_SOFTEND_MODE (0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup I2C_START_STOP_MODE I2C Start or Stop Mode
+ * @{
+ */
+#define I2C_NO_STARTSTOP (0x00000000U)
+#define I2C_GENERATE_STOP (uint32_t)(0x80000000U | I2C_CR2_STOP)
+#define I2C_GENERATE_START_READ (uint32_t)(0x80000000U | I2C_CR2_START | I2C_CR2_RD_WRN)
+#define I2C_GENERATE_START_WRITE (uint32_t)(0x80000000U | I2C_CR2_START)
+/**
+ * @}
+ */
+
+/** @defgroup I2C_Interrupt_configuration_definition I2C Interrupt configuration definition
+ * @brief I2C Interrupt definition
+ * Elements values convention: 0xXXXXXXXX
+ * - XXXXXXXX : Interrupt control mask
+ * @{
+ */
+#define I2C_IT_ERRI I2C_CR1_ERRIE
+#define I2C_IT_TCI I2C_CR1_TCIE
+#define I2C_IT_STOPI I2C_CR1_STOPIE
+#define I2C_IT_NACKI I2C_CR1_NACKIE
+#define I2C_IT_ADDRI I2C_CR1_ADDRIE
+#define I2C_IT_RXI I2C_CR1_RXIE
+#define I2C_IT_TXI I2C_CR1_TXIE
+/**
+ * @}
+ */
+
+/** @defgroup I2C_Flag_definition I2C Flag definition
+ * @{
+ */
+#define I2C_FLAG_TXE I2C_ISR_TXE
+#define I2C_FLAG_TXIS I2C_ISR_TXIS
+#define I2C_FLAG_RXNE I2C_ISR_RXNE
+#define I2C_FLAG_ADDR I2C_ISR_ADDR
+#define I2C_FLAG_AF I2C_ISR_NACKF
+#define I2C_FLAG_STOPF I2C_ISR_STOPF
+#define I2C_FLAG_TC I2C_ISR_TC
+#define I2C_FLAG_TCR I2C_ISR_TCR
+#define I2C_FLAG_BERR I2C_ISR_BERR
+#define I2C_FLAG_ARLO I2C_ISR_ARLO
+#define I2C_FLAG_OVR I2C_ISR_OVR
+#define I2C_FLAG_PECERR I2C_ISR_PECERR
+#define I2C_FLAG_TIMEOUT I2C_ISR_TIMEOUT
+#define I2C_FLAG_ALERT I2C_ISR_ALERT
+#define I2C_FLAG_BUSY I2C_ISR_BUSY
+#define I2C_FLAG_DIR I2C_ISR_DIR
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+
+/** @defgroup I2C_Exported_Macros I2C Exported Macros
+ * @{
+ */
+
+/** @brief Reset I2C handle state.
+ * @param __HANDLE__ specifies the I2C Handle.
+ * @retval None
+ */
+#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
+#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__) do{ \
+ (__HANDLE__)->State = HAL_I2C_STATE_RESET; \
+ (__HANDLE__)->MspInitCallback = NULL; \
+ (__HANDLE__)->MspDeInitCallback = NULL; \
+ } while(0)
+#else
+#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2C_STATE_RESET)
+#endif
+
+/** @brief Enable the specified I2C interrupt.
+ * @param __HANDLE__ specifies the I2C Handle.
+ * @param __INTERRUPT__ specifies the interrupt source to enable.
+ * This parameter can be one of the following values:
+ * @arg @ref I2C_IT_ERRI Errors interrupt enable
+ * @arg @ref I2C_IT_TCI Transfer complete interrupt enable
+ * @arg @ref I2C_IT_STOPI STOP detection interrupt enable
+ * @arg @ref I2C_IT_NACKI NACK received interrupt enable
+ * @arg @ref I2C_IT_ADDRI Address match interrupt enable
+ * @arg @ref I2C_IT_RXI RX interrupt enable
+ * @arg @ref I2C_IT_TXI TX interrupt enable
+ *
+ * @retval None
+ */
+#define __HAL_I2C_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 |= (__INTERRUPT__))
+
+/** @brief Disable the specified I2C interrupt.
+ * @param __HANDLE__ specifies the I2C Handle.
+ * @param __INTERRUPT__ specifies the interrupt source to disable.
+ * This parameter can be one of the following values:
+ * @arg @ref I2C_IT_ERRI Errors interrupt enable
+ * @arg @ref I2C_IT_TCI Transfer complete interrupt enable
+ * @arg @ref I2C_IT_STOPI STOP detection interrupt enable
+ * @arg @ref I2C_IT_NACKI NACK received interrupt enable
+ * @arg @ref I2C_IT_ADDRI Address match interrupt enable
+ * @arg @ref I2C_IT_RXI RX interrupt enable
+ * @arg @ref I2C_IT_TXI TX interrupt enable
+ *
+ * @retval None
+ */
+#define __HAL_I2C_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 &= (~(__INTERRUPT__)))
+
+/** @brief Check whether the specified I2C interrupt source is enabled or not.
+ * @param __HANDLE__ specifies the I2C Handle.
+ * @param __INTERRUPT__ specifies the I2C interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg @ref I2C_IT_ERRI Errors interrupt enable
+ * @arg @ref I2C_IT_TCI Transfer complete interrupt enable
+ * @arg @ref I2C_IT_STOPI STOP detection interrupt enable
+ * @arg @ref I2C_IT_NACKI NACK received interrupt enable
+ * @arg @ref I2C_IT_ADDRI Address match interrupt enable
+ * @arg @ref I2C_IT_RXI RX interrupt enable
+ * @arg @ref I2C_IT_TXI TX interrupt enable
+ *
+ * @retval The new state of __INTERRUPT__ (SET or RESET).
+ */
+#define __HAL_I2C_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR1 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief Check whether the specified I2C flag is set or not.
+ * @param __HANDLE__ specifies the I2C Handle.
+ * @param __FLAG__ specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg @ref I2C_FLAG_TXE Transmit data register empty
+ * @arg @ref I2C_FLAG_TXIS Transmit interrupt status
+ * @arg @ref I2C_FLAG_RXNE Receive data register not empty
+ * @arg @ref I2C_FLAG_ADDR Address matched (slave mode)
+ * @arg @ref I2C_FLAG_AF Acknowledge failure received flag
+ * @arg @ref I2C_FLAG_STOPF STOP detection flag
+ * @arg @ref I2C_FLAG_TC Transfer complete (master mode)
+ * @arg @ref I2C_FLAG_TCR Transfer complete reload
+ * @arg @ref I2C_FLAG_BERR Bus error
+ * @arg @ref I2C_FLAG_ARLO Arbitration lost
+ * @arg @ref I2C_FLAG_OVR Overrun/Underrun
+ * @arg @ref I2C_FLAG_PECERR PEC error in reception
+ * @arg @ref I2C_FLAG_TIMEOUT Timeout or Tlow detection flag
+ * @arg @ref I2C_FLAG_ALERT SMBus alert
+ * @arg @ref I2C_FLAG_BUSY Bus busy
+ * @arg @ref I2C_FLAG_DIR Transfer direction (slave mode)
+ *
+ * @retval The new state of __FLAG__ (SET or RESET).
+ */
+#define I2C_FLAG_MASK (0x0001FFFFU)
+#define __HAL_I2C_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) == (__FLAG__)) ? SET : RESET)
+
+/** @brief Clear the I2C pending flags which are cleared by writing 1 in a specific bit.
+ * @param __HANDLE__ specifies the I2C Handle.
+ * @param __FLAG__ specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg @ref I2C_FLAG_TXE Transmit data register empty
+ * @arg @ref I2C_FLAG_ADDR Address matched (slave mode)
+ * @arg @ref I2C_FLAG_AF Acknowledge failure received flag
+ * @arg @ref I2C_FLAG_STOPF STOP detection flag
+ * @arg @ref I2C_FLAG_BERR Bus error
+ * @arg @ref I2C_FLAG_ARLO Arbitration lost
+ * @arg @ref I2C_FLAG_OVR Overrun/Underrun
+ * @arg @ref I2C_FLAG_PECERR PEC error in reception
+ * @arg @ref I2C_FLAG_TIMEOUT Timeout or Tlow detection flag
+ * @arg @ref I2C_FLAG_ALERT SMBus alert
+ *
+ * @retval None
+ */
+#define __HAL_I2C_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__FLAG__) == I2C_FLAG_TXE) ? ((__HANDLE__)->Instance->ISR |= (__FLAG__)) \
+ : ((__HANDLE__)->Instance->ICR = (__FLAG__)))
+
+/** @brief Enable the specified I2C peripheral.
+ * @param __HANDLE__ specifies the I2C Handle.
+ * @retval None
+ */
+#define __HAL_I2C_ENABLE(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE))
+
+/** @brief Disable the specified I2C peripheral.
+ * @param __HANDLE__ specifies the I2C Handle.
+ * @retval None
+ */
+#define __HAL_I2C_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE))
+
+/** @brief Generate a Non-Acknowledge I2C peripheral in Slave mode.
+ * @param __HANDLE__ specifies the I2C Handle.
+ * @retval None
+ */
+#define __HAL_I2C_GENERATE_NACK(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR2, I2C_CR2_NACK))
+/**
+ * @}
+ */
+
+/* Include I2C HAL Extended module */
+#include "stm32f0xx_hal_i2c_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup I2C_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup I2C_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+/* Initialization and de-initialization functions******************************/
+HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c);
+HAL_StatusTypeDef HAL_I2C_DeInit(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c);
+
+/* Callbacks Register/UnRegister functions ***********************************/
+#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
+HAL_StatusTypeDef HAL_I2C_RegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID, pI2C_CallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_I2C_UnRegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID);
+
+HAL_StatusTypeDef HAL_I2C_RegisterAddrCallback(I2C_HandleTypeDef *hi2c, pI2C_AddrCallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_I2C_UnRegisterAddrCallback(I2C_HandleTypeDef *hi2c);
+#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
+/**
+ * @}
+ */
+
+/** @addtogroup I2C_Exported_Functions_Group2 Input and Output operation functions
+ * @{
+ */
+/* IO operation functions ****************************************************/
+/******* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout);
+
+/******* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+
+HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_I2C_EnableListen_IT(I2C_HandleTypeDef *hi2c);
+HAL_StatusTypeDef HAL_I2C_DisableListen_IT(I2C_HandleTypeDef *hi2c);
+HAL_StatusTypeDef HAL_I2C_Master_Abort_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress);
+
+/******* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+
+HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+/**
+ * @}
+ */
+
+/** @addtogroup I2C_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks
+ * @{
+ */
+/******* I2C IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */
+void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_AddrCallback(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode);
+void HAL_I2C_ListenCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_AbortCpltCallback(I2C_HandleTypeDef *hi2c);
+/**
+ * @}
+ */
+
+/** @addtogroup I2C_Exported_Functions_Group3 Peripheral State, Mode and Error functions
+ * @{
+ */
+/* Peripheral State, Mode and Error functions *********************************/
+HAL_I2C_StateTypeDef HAL_I2C_GetState(I2C_HandleTypeDef *hi2c);
+HAL_I2C_ModeTypeDef HAL_I2C_GetMode(I2C_HandleTypeDef *hi2c);
+uint32_t HAL_I2C_GetError(I2C_HandleTypeDef *hi2c);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup I2C_Private_Constants I2C Private Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup I2C_Private_Macro I2C Private Macros
+ * @{
+ */
+
+#define IS_I2C_ADDRESSING_MODE(MODE) (((MODE) == I2C_ADDRESSINGMODE_7BIT) || \
+ ((MODE) == I2C_ADDRESSINGMODE_10BIT))
+
+#define IS_I2C_DUAL_ADDRESS(ADDRESS) (((ADDRESS) == I2C_DUALADDRESS_DISABLE) || \
+ ((ADDRESS) == I2C_DUALADDRESS_ENABLE))
+
+#define IS_I2C_OWN_ADDRESS2_MASK(MASK) (((MASK) == I2C_OA2_NOMASK) || \
+ ((MASK) == I2C_OA2_MASK01) || \
+ ((MASK) == I2C_OA2_MASK02) || \
+ ((MASK) == I2C_OA2_MASK03) || \
+ ((MASK) == I2C_OA2_MASK04) || \
+ ((MASK) == I2C_OA2_MASK05) || \
+ ((MASK) == I2C_OA2_MASK06) || \
+ ((MASK) == I2C_OA2_MASK07))
+
+#define IS_I2C_GENERAL_CALL(CALL) (((CALL) == I2C_GENERALCALL_DISABLE) || \
+ ((CALL) == I2C_GENERALCALL_ENABLE))
+
+#define IS_I2C_NO_STRETCH(STRETCH) (((STRETCH) == I2C_NOSTRETCH_DISABLE) || \
+ ((STRETCH) == I2C_NOSTRETCH_ENABLE))
+
+#define IS_I2C_MEMADD_SIZE(SIZE) (((SIZE) == I2C_MEMADD_SIZE_8BIT) || \
+ ((SIZE) == I2C_MEMADD_SIZE_16BIT))
+
+#define IS_TRANSFER_MODE(MODE) (((MODE) == I2C_RELOAD_MODE) || \
+ ((MODE) == I2C_AUTOEND_MODE) || \
+ ((MODE) == I2C_SOFTEND_MODE))
+
+#define IS_TRANSFER_REQUEST(REQUEST) (((REQUEST) == I2C_GENERATE_STOP) || \
+ ((REQUEST) == I2C_GENERATE_START_READ) || \
+ ((REQUEST) == I2C_GENERATE_START_WRITE) || \
+ ((REQUEST) == I2C_NO_STARTSTOP))
+
+#define IS_I2C_TRANSFER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == I2C_FIRST_FRAME) || \
+ ((REQUEST) == I2C_FIRST_AND_NEXT_FRAME) || \
+ ((REQUEST) == I2C_NEXT_FRAME) || \
+ ((REQUEST) == I2C_FIRST_AND_LAST_FRAME) || \
+ ((REQUEST) == I2C_LAST_FRAME) || \
+ ((REQUEST) == I2C_LAST_FRAME_NO_STOP) || \
+ IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST))
+
+#define IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == I2C_OTHER_FRAME) || \
+ ((REQUEST) == I2C_OTHER_AND_LAST_FRAME))
+
+#define I2C_RESET_CR2(__HANDLE__) ((__HANDLE__)->Instance->CR2 &= (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_HEAD10R | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_RD_WRN)))
+
+#define I2C_GET_ADDR_MATCH(__HANDLE__) ((uint16_t)(((__HANDLE__)->Instance->ISR & I2C_ISR_ADDCODE) >> 16U))
+#define I2C_GET_DIR(__HANDLE__) ((uint8_t)(((__HANDLE__)->Instance->ISR & I2C_ISR_DIR) >> 16U))
+#define I2C_GET_STOP_MODE(__HANDLE__) ((__HANDLE__)->Instance->CR2 & I2C_CR2_AUTOEND)
+#define I2C_GET_OWN_ADDRESS1(__HANDLE__) ((uint16_t)((__HANDLE__)->Instance->OAR1 & I2C_OAR1_OA1))
+#define I2C_GET_OWN_ADDRESS2(__HANDLE__) ((uint16_t)((__HANDLE__)->Instance->OAR2 & I2C_OAR2_OA2))
+
+#define IS_I2C_OWN_ADDRESS1(ADDRESS1) ((ADDRESS1) <= 0x000003FFU)
+#define IS_I2C_OWN_ADDRESS2(ADDRESS2) ((ADDRESS2) <= (uint16_t)0x00FFU)
+
+#define I2C_MEM_ADD_MSB(__ADDRESS__) ((uint8_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)(0xFF00U))) >> 8U)))
+#define I2C_MEM_ADD_LSB(__ADDRESS__) ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)(0x00FFU))))
+
+#define I2C_GENERATE_START(__ADDMODE__,__ADDRESS__) (((__ADDMODE__) == I2C_ADDRESSINGMODE_7BIT) ? (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | (I2C_CR2_START) | (I2C_CR2_AUTOEND)) & (~I2C_CR2_RD_WRN)) : \
+ (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | (I2C_CR2_ADD10) | (I2C_CR2_START)) & (~I2C_CR2_RD_WRN)))
+
+#define I2C_CHECK_FLAG(__ISR__, __FLAG__) ((((__ISR__) & ((__FLAG__) & I2C_FLAG_MASK)) == ((__FLAG__) & I2C_FLAG_MASK)) ? SET : RESET)
+#define I2C_CHECK_IT_SOURCE(__CR1__, __IT__) ((((__CR1__) & (__IT__)) == (__IT__)) ? SET : RESET)
+/**
+ * @}
+ */
+
+/* Private Functions ---------------------------------------------------------*/
+/** @defgroup I2C_Private_Functions I2C Private Functions
+ * @{
+ */
+/* Private functions are defined in stm32f0xx_hal_i2c.c file */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* STM32F0xx_HAL_I2C_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h
new file mode 100644
index 0000000..ca388e0
--- /dev/null
+++ b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c_ex.h
@@ -0,0 +1,172 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_i2c_ex.h
+ * @author MCD Application Team
+ * @brief Header file of I2C HAL Extended module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32F0xx_HAL_I2C_EX_H
+#define STM32F0xx_HAL_I2C_EX_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup I2CEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup I2CEx_Exported_Constants I2C Extended Exported Constants
+ * @{
+ */
+
+/** @defgroup I2CEx_Analog_Filter I2C Extended Analog Filter
+ * @{
+ */
+#define I2C_ANALOGFILTER_ENABLE 0x00000000U
+#define I2C_ANALOGFILTER_DISABLE I2C_CR1_ANFOFF
+/**
+ * @}
+ */
+
+/** @defgroup I2CEx_FastModePlus I2C Extended Fast Mode Plus
+ * @{
+ */
+#define I2C_FMP_NOT_SUPPORTED 0xAAAA0000U /*!< Fast Mode Plus not supported */
+#if defined(SYSCFG_CFGR1_I2C_FMP_PA9)
+#define I2C_FASTMODEPLUS_PA9 SYSCFG_CFGR1_I2C_FMP_PA9 /*!< Enable Fast Mode Plus on PA9 */
+#define I2C_FASTMODEPLUS_PA10 SYSCFG_CFGR1_I2C_FMP_PA10 /*!< Enable Fast Mode Plus on PA10 */
+#else
+#define I2C_FASTMODEPLUS_PA9 (uint32_t)(0x00000001U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus PA9 not supported */
+#define I2C_FASTMODEPLUS_PA10 (uint32_t)(0x00000002U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus PA10 not supported */
+#endif
+#define I2C_FASTMODEPLUS_PB6 SYSCFG_CFGR1_I2C_FMP_PB6 /*!< Enable Fast Mode Plus on PB6 */
+#define I2C_FASTMODEPLUS_PB7 SYSCFG_CFGR1_I2C_FMP_PB7 /*!< Enable Fast Mode Plus on PB7 */
+#define I2C_FASTMODEPLUS_PB8 SYSCFG_CFGR1_I2C_FMP_PB8 /*!< Enable Fast Mode Plus on PB8 */
+#define I2C_FASTMODEPLUS_PB9 SYSCFG_CFGR1_I2C_FMP_PB9 /*!< Enable Fast Mode Plus on PB9 */
+#if defined(SYSCFG_CFGR1_I2C_FMP_I2C1)
+#define I2C_FASTMODEPLUS_I2C1 SYSCFG_CFGR1_I2C_FMP_I2C1 /*!< Enable Fast Mode Plus on I2C1 pins */
+#else
+#define I2C_FASTMODEPLUS_I2C1 (uint32_t)(0x00000100U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus I2C1 not supported */
+#endif
+#if defined(SYSCFG_CFGR1_I2C_FMP_I2C2)
+#define I2C_FASTMODEPLUS_I2C2 SYSCFG_CFGR1_I2C_FMP_I2C2 /*!< Enable Fast Mode Plus on I2C2 pins */
+#else
+#define I2C_FASTMODEPLUS_I2C2 (uint32_t)(0x00000200U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus I2C2 not supported */
+#endif
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup I2CEx_Exported_Functions I2C Extended Exported Functions
+ * @{
+ */
+
+/** @addtogroup I2CEx_Exported_Functions_Group1 Extended features functions
+ * @brief Extended features functions
+ * @{
+ */
+
+/* Peripheral Control functions ************************************************/
+HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter);
+HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter);
+#if defined(I2C_CR1_WUPEN)
+HAL_StatusTypeDef HAL_I2CEx_EnableWakeUp(I2C_HandleTypeDef *hi2c);
+HAL_StatusTypeDef HAL_I2CEx_DisableWakeUp(I2C_HandleTypeDef *hi2c);
+#endif
+void HAL_I2CEx_EnableFastModePlus(uint32_t ConfigFastModePlus);
+void HAL_I2CEx_DisableFastModePlus(uint32_t ConfigFastModePlus);
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup I2CEx_Private_Constants I2C Extended Private Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup I2CEx_Private_Macro I2C Extended Private Macros
+ * @{
+ */
+#define IS_I2C_ANALOG_FILTER(FILTER) (((FILTER) == I2C_ANALOGFILTER_ENABLE) || \
+ ((FILTER) == I2C_ANALOGFILTER_DISABLE))
+
+#define IS_I2C_DIGITAL_FILTER(FILTER) ((FILTER) <= 0x0000000FU)
+
+#define IS_I2C_FASTMODEPLUS(__CONFIG__) ((((__CONFIG__) & I2C_FMP_NOT_SUPPORTED) != I2C_FMP_NOT_SUPPORTED) && \
+ ((((__CONFIG__) & (I2C_FASTMODEPLUS_PA9)) == I2C_FASTMODEPLUS_PA9) || \
+ (((__CONFIG__) & (I2C_FASTMODEPLUS_PA10)) == I2C_FASTMODEPLUS_PA10) || \
+ (((__CONFIG__) & (I2C_FASTMODEPLUS_PB6)) == I2C_FASTMODEPLUS_PB6) || \
+ (((__CONFIG__) & (I2C_FASTMODEPLUS_PB7)) == I2C_FASTMODEPLUS_PB7) || \
+ (((__CONFIG__) & (I2C_FASTMODEPLUS_PB8)) == I2C_FASTMODEPLUS_PB8) || \
+ (((__CONFIG__) & (I2C_FASTMODEPLUS_PB9)) == I2C_FASTMODEPLUS_PB9) || \
+ (((__CONFIG__) & (I2C_FASTMODEPLUS_I2C1)) == I2C_FASTMODEPLUS_I2C1) || \
+ (((__CONFIG__) & (I2C_FASTMODEPLUS_I2C2)) == I2C_FASTMODEPLUS_I2C2)))
+/**
+ * @}
+ */
+
+/* Private Functions ---------------------------------------------------------*/
+/** @defgroup I2CEx_Private_Functions I2C Extended Private Functions
+ * @{
+ */
+/* Private functions are defined in stm32f0xx_hal_i2c_ex.c file */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32F0xx_HAL_I2C_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2s.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2s.h
new file mode 100644
index 0000000..337318a
--- /dev/null
+++ b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2s.h
@@ -0,0 +1,546 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_i2s.h
+ * @author MCD Application Team
+ * @brief Header file of I2S HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32F0xx_HAL_I2S_H
+#define STM32F0xx_HAL_I2S_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+#if defined(SPI_I2S_SUPPORT)
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup I2S
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup I2S_Exported_Types I2S Exported Types
+ * @{
+ */
+
+/**
+ * @brief I2S Init structure definition
+ */
+typedef struct
+{
+ uint32_t Mode; /*!< Specifies the I2S operating mode.
+ This parameter can be a value of @ref I2S_Mode */
+
+ uint32_t Standard; /*!< Specifies the standard used for the I2S communication.
+ This parameter can be a value of @ref I2S_Standard */
+
+ uint32_t DataFormat; /*!< Specifies the data format for the I2S communication.
+ This parameter can be a value of @ref I2S_Data_Format */
+
+ uint32_t MCLKOutput; /*!< Specifies whether the I2S MCLK output is enabled or not.
+ This parameter can be a value of @ref I2S_MCLK_Output */
+
+ uint32_t AudioFreq; /*!< Specifies the frequency selected for the I2S communication.
+ This parameter can be a value of @ref I2S_Audio_Frequency */
+
+ uint32_t CPOL; /*!< Specifies the idle state of the I2S clock.
+ This parameter can be a value of @ref I2S_Clock_Polarity */
+} I2S_InitTypeDef;
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_I2S_STATE_RESET = 0x00U, /*!< I2S not yet initialized or disabled */
+ HAL_I2S_STATE_READY = 0x01U, /*!< I2S initialized and ready for use */
+ HAL_I2S_STATE_BUSY = 0x02U, /*!< I2S internal process is ongoing */
+ HAL_I2S_STATE_BUSY_TX = 0x03U, /*!< Data Transmission process is ongoing */
+ HAL_I2S_STATE_BUSY_RX = 0x04U, /*!< Data Reception process is ongoing */
+ HAL_I2S_STATE_TIMEOUT = 0x06U, /*!< I2S timeout state */
+ HAL_I2S_STATE_ERROR = 0x07U /*!< I2S error state */
+} HAL_I2S_StateTypeDef;
+
+/**
+ * @brief I2S handle Structure definition
+ */
+#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1)
+typedef struct __I2S_HandleTypeDef
+#else
+typedef struct
+#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */
+{
+ SPI_TypeDef *Instance; /*!< I2S registers base address */
+
+ I2S_InitTypeDef Init; /*!< I2S communication parameters */
+
+ uint16_t *pTxBuffPtr; /*!< Pointer to I2S Tx transfer buffer */
+
+ __IO uint16_t TxXferSize; /*!< I2S Tx transfer size */
+
+ __IO uint16_t TxXferCount; /*!< I2S Tx transfer Counter */
+
+ uint16_t *pRxBuffPtr; /*!< Pointer to I2S Rx transfer buffer */
+
+ __IO uint16_t RxXferSize; /*!< I2S Rx transfer size */
+
+ __IO uint16_t RxXferCount; /*!< I2S Rx transfer counter
+ (This field is initialized at the
+ same value as transfer size at the
+ beginning of the transfer and
+ decremented when a sample is received
+ NbSamplesReceived = RxBufferSize-RxBufferCount) */
+ DMA_HandleTypeDef *hdmatx; /*!< I2S Tx DMA handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /*!< I2S Rx DMA handle parameters */
+
+ __IO HAL_LockTypeDef Lock; /*!< I2S locking object */
+
+ __IO HAL_I2S_StateTypeDef State; /*!< I2S communication state */
+
+ __IO uint32_t ErrorCode; /*!< I2S Error code
+ This parameter can be a value of @ref I2S_Error */
+
+#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U)
+ void (* TxCpltCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Tx Completed callback */
+ void (* RxCpltCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Rx Completed callback */
+ void (* TxHalfCpltCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Tx Half Completed callback */
+ void (* RxHalfCpltCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Rx Half Completed callback */
+ void (* ErrorCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Error callback */
+ void (* MspInitCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Msp Init callback */
+ void (* MspDeInitCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Msp DeInit callback */
+
+#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */
+} I2S_HandleTypeDef;
+
+#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U)
+/**
+ * @brief HAL I2S Callback ID enumeration definition
+ */
+typedef enum
+{
+ HAL_I2S_TX_COMPLETE_CB_ID = 0x00U, /*!< I2S Tx Completed callback ID */
+ HAL_I2S_RX_COMPLETE_CB_ID = 0x01U, /*!< I2S Rx Completed callback ID */
+ HAL_I2S_TX_HALF_COMPLETE_CB_ID = 0x03U, /*!< I2S Tx Half Completed callback ID */
+ HAL_I2S_RX_HALF_COMPLETE_CB_ID = 0x04U, /*!< I2S Rx Half Completed callback ID */
+ HAL_I2S_ERROR_CB_ID = 0x06U, /*!< I2S Error callback ID */
+ HAL_I2S_MSPINIT_CB_ID = 0x07U, /*!< I2S Msp Init callback ID */
+ HAL_I2S_MSPDEINIT_CB_ID = 0x08U /*!< I2S Msp DeInit callback ID */
+
+} HAL_I2S_CallbackIDTypeDef;
+
+/**
+ * @brief HAL I2S Callback pointer definition
+ */
+typedef void (*pI2S_CallbackTypeDef)(I2S_HandleTypeDef *hi2s); /*!< pointer to an I2S callback function */
+
+#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup I2S_Exported_Constants I2S Exported Constants
+ * @{
+ */
+/** @defgroup I2S_Error I2S Error
+ * @{
+ */
+#define HAL_I2S_ERROR_NONE (0x00000000U) /*!< No error */
+#define HAL_I2S_ERROR_TIMEOUT (0x00000001U) /*!< Timeout error */
+#define HAL_I2S_ERROR_OVR (0x00000002U) /*!< OVR error */
+#define HAL_I2S_ERROR_UDR (0x00000004U) /*!< UDR error */
+#define HAL_I2S_ERROR_DMA (0x00000008U) /*!< DMA transfer error */
+#define HAL_I2S_ERROR_PRESCALER (0x00000010U) /*!< Prescaler Calculation error */
+#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U)
+#define HAL_I2S_ERROR_INVALID_CALLBACK (0x00000020U) /*!< Invalid Callback error */
+#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Mode I2S Mode
+ * @{
+ */
+#define I2S_MODE_SLAVE_TX (0x00000000U)
+#define I2S_MODE_SLAVE_RX (SPI_I2SCFGR_I2SCFG_0)
+#define I2S_MODE_MASTER_TX (SPI_I2SCFGR_I2SCFG_1)
+#define I2S_MODE_MASTER_RX ((SPI_I2SCFGR_I2SCFG_0 | SPI_I2SCFGR_I2SCFG_1))
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Standard I2S Standard
+ * @{
+ */
+#define I2S_STANDARD_PHILIPS (0x00000000U)
+#define I2S_STANDARD_MSB (SPI_I2SCFGR_I2SSTD_0)
+#define I2S_STANDARD_LSB (SPI_I2SCFGR_I2SSTD_1)
+#define I2S_STANDARD_PCM_SHORT ((SPI_I2SCFGR_I2SSTD_0 | SPI_I2SCFGR_I2SSTD_1))
+#define I2S_STANDARD_PCM_LONG ((SPI_I2SCFGR_I2SSTD_0 | SPI_I2SCFGR_I2SSTD_1 | SPI_I2SCFGR_PCMSYNC))
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Data_Format I2S Data Format
+ * @{
+ */
+#define I2S_DATAFORMAT_16B (0x00000000U)
+#define I2S_DATAFORMAT_16B_EXTENDED (SPI_I2SCFGR_CHLEN)
+#define I2S_DATAFORMAT_24B ((SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN_0))
+#define I2S_DATAFORMAT_32B ((SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN_1))
+/**
+ * @}
+ */
+
+/** @defgroup I2S_MCLK_Output I2S MCLK Output
+ * @{
+ */
+#define I2S_MCLKOUTPUT_ENABLE (SPI_I2SPR_MCKOE)
+#define I2S_MCLKOUTPUT_DISABLE (0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Audio_Frequency I2S Audio Frequency
+ * @{
+ */
+#define I2S_AUDIOFREQ_192K (192000U)
+#define I2S_AUDIOFREQ_96K (96000U)
+#define I2S_AUDIOFREQ_48K (48000U)
+#define I2S_AUDIOFREQ_44K (44100U)
+#define I2S_AUDIOFREQ_32K (32000U)
+#define I2S_AUDIOFREQ_22K (22050U)
+#define I2S_AUDIOFREQ_16K (16000U)
+#define I2S_AUDIOFREQ_11K (11025U)
+#define I2S_AUDIOFREQ_8K (8000U)
+#define I2S_AUDIOFREQ_DEFAULT (2U)
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Clock_Polarity I2S Clock Polarity
+ * @{
+ */
+#define I2S_CPOL_LOW (0x00000000U)
+#define I2S_CPOL_HIGH (SPI_I2SCFGR_CKPOL)
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Interrupts_Definition I2S Interrupts Definition
+ * @{
+ */
+#define I2S_IT_TXE SPI_CR2_TXEIE
+#define I2S_IT_RXNE SPI_CR2_RXNEIE
+#define I2S_IT_ERR SPI_CR2_ERRIE
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Flags_Definition I2S Flags Definition
+ * @{
+ */
+#define I2S_FLAG_TXE SPI_SR_TXE
+#define I2S_FLAG_RXNE SPI_SR_RXNE
+
+#define I2S_FLAG_UDR SPI_SR_UDR
+#define I2S_FLAG_OVR SPI_SR_OVR
+#define I2S_FLAG_FRE SPI_SR_FRE
+
+#define I2S_FLAG_CHSIDE SPI_SR_CHSIDE
+#define I2S_FLAG_BSY SPI_SR_BSY
+
+#define I2S_FLAG_MASK (SPI_SR_RXNE\
+ | SPI_SR_TXE | SPI_SR_UDR | SPI_SR_OVR | SPI_SR_FRE | SPI_SR_CHSIDE | SPI_SR_BSY)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup I2S_Exported_macros I2S Exported Macros
+ * @{
+ */
+
+/** @brief Reset I2S handle state
+ * @param __HANDLE__ specifies the I2S Handle.
+ * @retval None
+ */
+#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U)
+#define __HAL_I2S_RESET_HANDLE_STATE(__HANDLE__) do{ \
+ (__HANDLE__)->State = HAL_I2S_STATE_RESET; \
+ (__HANDLE__)->MspInitCallback = NULL; \
+ (__HANDLE__)->MspDeInitCallback = NULL; \
+ } while(0)
+#else
+#define __HAL_I2S_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2S_STATE_RESET)
+#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */
+
+/** @brief Enable the specified SPI peripheral (in I2S mode).
+ * @param __HANDLE__ specifies the I2S Handle.
+ * @retval None
+ */
+#define __HAL_I2S_ENABLE(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->I2SCFGR, SPI_I2SCFGR_I2SE))
+
+/** @brief Disable the specified SPI peripheral (in I2S mode).
+ * @param __HANDLE__ specifies the I2S Handle.
+ * @retval None
+ */
+#define __HAL_I2S_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->I2SCFGR, SPI_I2SCFGR_I2SE))
+
+/** @brief Enable the specified I2S interrupts.
+ * @param __HANDLE__ specifies the I2S Handle.
+ * @param __INTERRUPT__ specifies the interrupt source to enable or disable.
+ * This parameter can be one of the following values:
+ * @arg I2S_IT_TXE: Tx buffer empty interrupt enable
+ * @arg I2S_IT_RXNE: RX buffer not empty interrupt enable
+ * @arg I2S_IT_ERR: Error interrupt enable
+ * @retval None
+ */
+#define __HAL_I2S_ENABLE_IT(__HANDLE__, __INTERRUPT__) (SET_BIT((__HANDLE__)->Instance->CR2,(__INTERRUPT__)))
+
+/** @brief Disable the specified I2S interrupts.
+ * @param __HANDLE__ specifies the I2S Handle.
+ * @param __INTERRUPT__ specifies the interrupt source to enable or disable.
+ * This parameter can be one of the following values:
+ * @arg I2S_IT_TXE: Tx buffer empty interrupt enable
+ * @arg I2S_IT_RXNE: RX buffer not empty interrupt enable
+ * @arg I2S_IT_ERR: Error interrupt enable
+ * @retval None
+ */
+#define __HAL_I2S_DISABLE_IT(__HANDLE__, __INTERRUPT__) (CLEAR_BIT((__HANDLE__)->Instance->CR2,(__INTERRUPT__)))
+
+/** @brief Checks if the specified I2S interrupt source is enabled or disabled.
+ * @param __HANDLE__ specifies the I2S Handle.
+ * This parameter can be I2S where x: 1, 2, or 3 to select the I2S peripheral.
+ * @param __INTERRUPT__ specifies the I2S interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg I2S_IT_TXE: Tx buffer empty interrupt enable
+ * @arg I2S_IT_RXNE: RX buffer not empty interrupt enable
+ * @arg I2S_IT_ERR: Error interrupt enable
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_I2S_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2\
+ & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief Checks whether the specified I2S flag is set or not.
+ * @param __HANDLE__ specifies the I2S Handle.
+ * @param __FLAG__ specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg I2S_FLAG_RXNE: Receive buffer not empty flag
+ * @arg I2S_FLAG_TXE: Transmit buffer empty flag
+ * @arg I2S_FLAG_UDR: Underrun flag
+ * @arg I2S_FLAG_OVR: Overrun flag
+ * @arg I2S_FLAG_FRE: Frame error flag
+ * @arg I2S_FLAG_CHSIDE: Channel Side flag
+ * @arg I2S_FLAG_BSY: Busy flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_I2S_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clears the I2S OVR pending flag.
+ * @param __HANDLE__ specifies the I2S Handle.
+ * @retval None
+ */
+#define __HAL_I2S_CLEAR_OVRFLAG(__HANDLE__) do{ \
+ __IO uint32_t tmpreg_ovr = 0x00U; \
+ tmpreg_ovr = (__HANDLE__)->Instance->DR; \
+ tmpreg_ovr = (__HANDLE__)->Instance->SR; \
+ UNUSED(tmpreg_ovr); \
+ }while(0U)
+/** @brief Clears the I2S UDR pending flag.
+ * @param __HANDLE__ specifies the I2S Handle.
+ * @retval None
+ */
+#define __HAL_I2S_CLEAR_UDRFLAG(__HANDLE__) do{\
+ __IO uint32_t tmpreg_udr = 0x00U;\
+ tmpreg_udr = ((__HANDLE__)->Instance->SR);\
+ UNUSED(tmpreg_udr); \
+ }while(0U)
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup I2S_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup I2S_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization/de-initialization functions ********************************/
+HAL_StatusTypeDef HAL_I2S_Init(I2S_HandleTypeDef *hi2s);
+HAL_StatusTypeDef HAL_I2S_DeInit(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_MspInit(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_MspDeInit(I2S_HandleTypeDef *hi2s);
+
+/* Callbacks Register/UnRegister functions ***********************************/
+#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U)
+HAL_StatusTypeDef HAL_I2S_RegisterCallback(I2S_HandleTypeDef *hi2s, HAL_I2S_CallbackIDTypeDef CallbackID,
+ pI2S_CallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_I2S_UnRegisterCallback(I2S_HandleTypeDef *hi2s, HAL_I2S_CallbackIDTypeDef CallbackID);
+#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */
+/**
+ * @}
+ */
+
+/** @addtogroup I2S_Exported_Functions_Group2
+ * @{
+ */
+/* I/O operation functions ***************************************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_I2S_Transmit(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2S_Receive(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_I2S_Transmit_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2S_Receive_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
+void HAL_I2S_IRQHandler(I2S_HandleTypeDef *hi2s);
+
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_I2S_Transmit_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2S_Receive_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
+
+HAL_StatusTypeDef HAL_I2S_DMAPause(I2S_HandleTypeDef *hi2s);
+HAL_StatusTypeDef HAL_I2S_DMAResume(I2S_HandleTypeDef *hi2s);
+HAL_StatusTypeDef HAL_I2S_DMAStop(I2S_HandleTypeDef *hi2s);
+
+/* Callbacks used in non blocking modes (Interrupt and DMA) *******************/
+void HAL_I2S_TxHalfCpltCallback(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_TxCpltCallback(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_RxHalfCpltCallback(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_RxCpltCallback(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_ErrorCallback(I2S_HandleTypeDef *hi2s);
+/**
+ * @}
+ */
+
+/** @addtogroup I2S_Exported_Functions_Group3
+ * @{
+ */
+/* Peripheral Control and State functions ************************************/
+HAL_I2S_StateTypeDef HAL_I2S_GetState(I2S_HandleTypeDef *hi2s);
+uint32_t HAL_I2S_GetError(I2S_HandleTypeDef *hi2s);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup I2S_Private_Macros I2S Private Macros
+ * @{
+ */
+
+/** @brief Check whether the specified SPI flag is set or not.
+ * @param __SR__ copy of I2S SR regsiter.
+ * @param __FLAG__ specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg I2S_FLAG_RXNE: Receive buffer not empty flag
+ * @arg I2S_FLAG_TXE: Transmit buffer empty flag
+ * @arg I2S_FLAG_UDR: Underrun error flag
+ * @arg I2S_FLAG_OVR: Overrun flag
+ * @arg I2S_FLAG_CHSIDE: Channel side flag
+ * @arg I2S_FLAG_BSY: Busy flag
+ * @retval SET or RESET.
+ */
+#define I2S_CHECK_FLAG(__SR__, __FLAG__) ((((__SR__)\
+ & ((__FLAG__) & I2S_FLAG_MASK)) == ((__FLAG__) & I2S_FLAG_MASK)) ? SET : RESET)
+
+/** @brief Check whether the specified SPI Interrupt is set or not.
+ * @param __CR2__ copy of I2S CR2 regsiter.
+ * @param __INTERRUPT__ specifies the SPI interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg I2S_IT_TXE: Tx buffer empty interrupt enable
+ * @arg I2S_IT_RXNE: RX buffer not empty interrupt enable
+ * @arg I2S_IT_ERR: Error interrupt enable
+ * @retval SET or RESET.
+ */
+#define I2S_CHECK_IT_SOURCE(__CR2__, __INTERRUPT__) ((((__CR2__)\
+ & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief Checks if I2S Mode parameter is in allowed range.
+ * @param __MODE__ specifies the I2S Mode.
+ * This parameter can be a value of @ref I2S_Mode
+ * @retval None
+ */
+#define IS_I2S_MODE(__MODE__) (((__MODE__) == I2S_MODE_SLAVE_TX) || \
+ ((__MODE__) == I2S_MODE_SLAVE_RX) || \
+ ((__MODE__) == I2S_MODE_MASTER_TX) || \
+ ((__MODE__) == I2S_MODE_MASTER_RX))
+
+#define IS_I2S_STANDARD(__STANDARD__) (((__STANDARD__) == I2S_STANDARD_PHILIPS) || \
+ ((__STANDARD__) == I2S_STANDARD_MSB) || \
+ ((__STANDARD__) == I2S_STANDARD_LSB) || \
+ ((__STANDARD__) == I2S_STANDARD_PCM_SHORT) || \
+ ((__STANDARD__) == I2S_STANDARD_PCM_LONG))
+
+#define IS_I2S_DATA_FORMAT(__FORMAT__) (((__FORMAT__) == I2S_DATAFORMAT_16B) || \
+ ((__FORMAT__) == I2S_DATAFORMAT_16B_EXTENDED) || \
+ ((__FORMAT__) == I2S_DATAFORMAT_24B) || \
+ ((__FORMAT__) == I2S_DATAFORMAT_32B))
+
+#define IS_I2S_MCLK_OUTPUT(__OUTPUT__) (((__OUTPUT__) == I2S_MCLKOUTPUT_ENABLE) || \
+ ((__OUTPUT__) == I2S_MCLKOUTPUT_DISABLE))
+
+#define IS_I2S_AUDIO_FREQ(__FREQ__) ((((__FREQ__) >= I2S_AUDIOFREQ_8K) && \
+ ((__FREQ__) <= I2S_AUDIOFREQ_192K)) || \
+ ((__FREQ__) == I2S_AUDIOFREQ_DEFAULT))
+
+/** @brief Checks if I2S Serial clock steady state parameter is in allowed range.
+ * @param __CPOL__ specifies the I2S serial clock steady state.
+ * This parameter can be a value of @ref I2S_Clock_Polarity
+ * @retval None
+ */
+#define IS_I2S_CPOL(__CPOL__) (((__CPOL__) == I2S_CPOL_LOW) || \
+ ((__CPOL__) == I2S_CPOL_HIGH))
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* SPI_I2S_SUPPORT */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32F0xx_HAL_I2S_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_irda.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_irda.h
new file mode 100644
index 0000000..fb85352
--- /dev/null
+++ b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_irda.h
@@ -0,0 +1,844 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_irda.h
+ * @author MCD Application Team
+ * @brief Header file of IRDA HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32F0xx_HAL_IRDA_H
+#define STM32F0xx_HAL_IRDA_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#if defined(USART_IRDA_SUPPORT)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup IRDA
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup IRDA_Exported_Types IRDA Exported Types
+ * @{
+ */
+
+/**
+ * @brief IRDA Init Structure definition
+ */
+typedef struct
+{
+ uint32_t BaudRate; /*!< This member configures the IRDA communication baud rate.
+ The baud rate register is computed using the following formula:
+ Baud Rate Register = ((usart_ker_clk) / ((hirda->Init.BaudRate)))
+ where usart_ker_clk is the IRDA input clock */
+
+ uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
+ This parameter can be a value of @ref IRDAEx_Word_Length */
+
+ uint32_t Parity; /*!< Specifies the parity mode.
+ This parameter can be a value of @ref IRDA_Parity
+ @note When parity is enabled, the computed parity is inserted
+ at the MSB position of the transmitted data (9th bit when
+ the word length is set to 9 data bits; 8th bit when the
+ word length is set to 8 data bits). */
+
+ uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled.
+ This parameter can be a value of @ref IRDA_Transfer_Mode */
+
+ uint8_t Prescaler; /*!< Specifies the Prescaler value for dividing the UART/USART source clock
+ to achieve low-power frequency.
+ @note Prescaler value 0 is forbidden */
+
+ uint16_t PowerMode; /*!< Specifies the IRDA power mode.
+ This parameter can be a value of @ref IRDA_Low_Power */
+
+} IRDA_InitTypeDef;
+
+/**
+ * @brief HAL IRDA State definition
+ * @note HAL IRDA State value is a combination of 2 different substates: gState and RxState (see @ref IRDA_State_Definition).
+ * - gState contains IRDA state information related to global Handle management
+ * and also information related to Tx operations.
+ * gState value coding follow below described bitmap :
+ * b7-b6 Error information
+ * 00 : No Error
+ * 01 : (Not Used)
+ * 10 : Timeout
+ * 11 : Error
+ * b5 Peripheral initialization status
+ * 0 : Reset (Peripheral not initialized)
+ * 1 : Init done (Peripheral not initialized. HAL IRDA Init function already called)
+ * b4-b3 (not used)
+ * xx : Should be set to 00
+ * b2 Intrinsic process state
+ * 0 : Ready
+ * 1 : Busy (Peripheral busy with some configuration or internal operations)
+ * b1 (not used)
+ * x : Should be set to 0
+ * b0 Tx state
+ * 0 : Ready (no Tx operation ongoing)
+ * 1 : Busy (Tx operation ongoing)
+ * - RxState contains information related to Rx operations.
+ * RxState value coding follow below described bitmap :
+ * b7-b6 (not used)
+ * xx : Should be set to 00
+ * b5 Peripheral initialization status
+ * 0 : Reset (Peripheral not initialized)
+ * 1 : Init done (Peripheral not initialized)
+ * b4-b2 (not used)
+ * xxx : Should be set to 000
+ * b1 Rx state
+ * 0 : Ready (no Rx operation ongoing)
+ * 1 : Busy (Rx operation ongoing)
+ * b0 (not used)
+ * x : Should be set to 0.
+ */
+typedef uint32_t HAL_IRDA_StateTypeDef;
+
+/**
+ * @brief IRDA clock sources definition
+ */
+typedef enum
+{
+ IRDA_CLOCKSOURCE_PCLK1 = 0x00U, /*!< PCLK1 clock source */
+ IRDA_CLOCKSOURCE_HSI = 0x02U, /*!< HSI clock source */
+ IRDA_CLOCKSOURCE_SYSCLK = 0x04U, /*!< SYSCLK clock source */
+ IRDA_CLOCKSOURCE_LSE = 0x10U, /*!< LSE clock source */
+ IRDA_CLOCKSOURCE_UNDEFINED = 0x20U /*!< Undefined clock source */
+} IRDA_ClockSourceTypeDef;
+
+/**
+ * @brief IRDA handle Structure definition
+ */
+#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1)
+typedef struct __IRDA_HandleTypeDef
+#else
+typedef struct
+#endif /* USE_HAL_IRDA_REGISTER_CALLBACKS */
+{
+ USART_TypeDef *Instance; /*!< USART registers base address */
+
+ IRDA_InitTypeDef Init; /*!< IRDA communication parameters */
+
+ uint8_t *pTxBuffPtr; /*!< Pointer to IRDA Tx transfer Buffer */
+
+ uint16_t TxXferSize; /*!< IRDA Tx Transfer size */
+
+ __IO uint16_t TxXferCount; /*!< IRDA Tx Transfer Counter */
+
+ uint8_t *pRxBuffPtr; /*!< Pointer to IRDA Rx transfer Buffer */
+
+ uint16_t RxXferSize; /*!< IRDA Rx Transfer size */
+
+ __IO uint16_t RxXferCount; /*!< IRDA Rx Transfer Counter */
+
+ uint16_t Mask; /*!< USART RX RDR register mask */
+
+ DMA_HandleTypeDef *hdmatx; /*!< IRDA Tx DMA Handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /*!< IRDA Rx DMA Handle parameters */
+
+ HAL_LockTypeDef Lock; /*!< Locking object */
+
+ __IO HAL_IRDA_StateTypeDef gState; /*!< IRDA state information related to global Handle management
+ and also related to Tx operations.
+ This parameter can be a value of @ref HAL_IRDA_StateTypeDef */
+
+ __IO HAL_IRDA_StateTypeDef RxState; /*!< IRDA state information related to Rx operations.
+ This parameter can be a value of @ref HAL_IRDA_StateTypeDef */
+
+ __IO uint32_t ErrorCode; /*!< IRDA Error code */
+
+#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1)
+ void (* TxHalfCpltCallback)(struct __IRDA_HandleTypeDef *hirda); /*!< IRDA Tx Half Complete Callback */
+
+ void (* TxCpltCallback)(struct __IRDA_HandleTypeDef *hirda); /*!< IRDA Tx Complete Callback */
+
+ void (* RxHalfCpltCallback)(struct __IRDA_HandleTypeDef *hirda); /*!< IRDA Rx Half Complete Callback */
+
+ void (* RxCpltCallback)(struct __IRDA_HandleTypeDef *hirda); /*!< IRDA Rx Complete Callback */
+
+ void (* ErrorCallback)(struct __IRDA_HandleTypeDef *hirda); /*!< IRDA Error Callback */
+
+ void (* AbortCpltCallback)(struct __IRDA_HandleTypeDef *hirda); /*!< IRDA Abort Complete Callback */
+
+ void (* AbortTransmitCpltCallback)(struct __IRDA_HandleTypeDef *hirda); /*!< IRDA Abort Transmit Complete Callback */
+
+ void (* AbortReceiveCpltCallback)(struct __IRDA_HandleTypeDef *hirda); /*!< IRDA Abort Receive Complete Callback */
+
+
+ void (* MspInitCallback)(struct __IRDA_HandleTypeDef *hirda); /*!< IRDA Msp Init callback */
+
+ void (* MspDeInitCallback)(struct __IRDA_HandleTypeDef *hirda); /*!< IRDA Msp DeInit callback */
+#endif /* USE_HAL_IRDA_REGISTER_CALLBACKS */
+
+} IRDA_HandleTypeDef;
+
+#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1)
+/**
+ * @brief HAL IRDA Callback ID enumeration definition
+ */
+typedef enum
+{
+ HAL_IRDA_TX_HALFCOMPLETE_CB_ID = 0x00U, /*!< IRDA Tx Half Complete Callback ID */
+ HAL_IRDA_TX_COMPLETE_CB_ID = 0x01U, /*!< IRDA Tx Complete Callback ID */
+ HAL_IRDA_RX_HALFCOMPLETE_CB_ID = 0x02U, /*!< IRDA Rx Half Complete Callback ID */
+ HAL_IRDA_RX_COMPLETE_CB_ID = 0x03U, /*!< IRDA Rx Complete Callback ID */
+ HAL_IRDA_ERROR_CB_ID = 0x04U, /*!< IRDA Error Callback ID */
+ HAL_IRDA_ABORT_COMPLETE_CB_ID = 0x05U, /*!< IRDA Abort Complete Callback ID */
+ HAL_IRDA_ABORT_TRANSMIT_COMPLETE_CB_ID = 0x06U, /*!< IRDA Abort Transmit Complete Callback ID */
+ HAL_IRDA_ABORT_RECEIVE_COMPLETE_CB_ID = 0x07U, /*!< IRDA Abort Receive Complete Callback ID */
+
+ HAL_IRDA_MSPINIT_CB_ID = 0x08U, /*!< IRDA MspInit callback ID */
+ HAL_IRDA_MSPDEINIT_CB_ID = 0x09U /*!< IRDA MspDeInit callback ID */
+
+} HAL_IRDA_CallbackIDTypeDef;
+
+/**
+ * @brief HAL IRDA Callback pointer definition
+ */
+typedef void (*pIRDA_CallbackTypeDef)(IRDA_HandleTypeDef *hirda); /*!< pointer to an IRDA callback function */
+
+#endif /* USE_HAL_IRDA_REGISTER_CALLBACKS */
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup IRDA_Exported_Constants IRDA Exported Constants
+ * @{
+ */
+
+/** @defgroup IRDA_State_Definition IRDA State Code Definition
+ * @{
+ */
+#define HAL_IRDA_STATE_RESET 0x00000000U /*!< Peripheral is not initialized
+ Value is allowed for gState and RxState */
+#define HAL_IRDA_STATE_READY 0x00000020U /*!< Peripheral Initialized and ready for use
+ Value is allowed for gState and RxState */
+#define HAL_IRDA_STATE_BUSY 0x00000024U /*!< An internal process is ongoing
+ Value is allowed for gState only */
+#define HAL_IRDA_STATE_BUSY_TX 0x00000021U /*!< Data Transmission process is ongoing
+ Value is allowed for gState only */
+#define HAL_IRDA_STATE_BUSY_RX 0x00000022U /*!< Data Reception process is ongoing
+ Value is allowed for RxState only */
+#define HAL_IRDA_STATE_BUSY_TX_RX 0x00000023U /*!< Data Transmission and Reception process is ongoing
+ Not to be used for neither gState nor RxState.
+ Value is result of combination (Or) between gState and RxState values */
+#define HAL_IRDA_STATE_TIMEOUT 0x000000A0U /*!< Timeout state
+ Value is allowed for gState only */
+#define HAL_IRDA_STATE_ERROR 0x000000E0U /*!< Error
+ Value is allowed for gState only */
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_Error_Definition IRDA Error Code Definition
+ * @{
+ */
+#define HAL_IRDA_ERROR_NONE ((uint32_t)0x00000000U) /*!< No error */
+#define HAL_IRDA_ERROR_PE ((uint32_t)0x00000001U) /*!< Parity error */
+#define HAL_IRDA_ERROR_NE ((uint32_t)0x00000002U) /*!< Noise error */
+#define HAL_IRDA_ERROR_FE ((uint32_t)0x00000004U) /*!< frame error */
+#define HAL_IRDA_ERROR_ORE ((uint32_t)0x00000008U) /*!< Overrun error */
+#define HAL_IRDA_ERROR_DMA ((uint32_t)0x00000010U) /*!< DMA transfer error */
+#define HAL_IRDA_ERROR_BUSY ((uint32_t)0x00000020U) /*!< Busy Error */
+#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1)
+#define HAL_IRDA_ERROR_INVALID_CALLBACK ((uint32_t)0x00000040U) /*!< Invalid Callback error */
+#endif /* USE_HAL_IRDA_REGISTER_CALLBACKS */
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_Parity IRDA Parity
+ * @{
+ */
+#define IRDA_PARITY_NONE 0x00000000U /*!< No parity */
+#define IRDA_PARITY_EVEN USART_CR1_PCE /*!< Even parity */
+#define IRDA_PARITY_ODD (USART_CR1_PCE | USART_CR1_PS) /*!< Odd parity */
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_Transfer_Mode IRDA Transfer Mode
+ * @{
+ */
+#define IRDA_MODE_RX USART_CR1_RE /*!< RX mode */
+#define IRDA_MODE_TX USART_CR1_TE /*!< TX mode */
+#define IRDA_MODE_TX_RX (USART_CR1_TE |USART_CR1_RE) /*!< RX and TX mode */
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_Low_Power IRDA Low Power
+ * @{
+ */
+#define IRDA_POWERMODE_NORMAL 0x00000000U /*!< IRDA normal power mode */
+#define IRDA_POWERMODE_LOWPOWER USART_CR3_IRLP /*!< IRDA low power mode */
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_State IRDA State
+ * @{
+ */
+#define IRDA_STATE_DISABLE 0x00000000U /*!< IRDA disabled */
+#define IRDA_STATE_ENABLE USART_CR1_UE /*!< IRDA enabled */
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_Mode IRDA Mode
+ * @{
+ */
+#define IRDA_MODE_DISABLE 0x00000000U /*!< Associated UART disabled in IRDA mode */
+#define IRDA_MODE_ENABLE USART_CR3_IREN /*!< Associated UART enabled in IRDA mode */
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_One_Bit IRDA One Bit Sampling
+ * @{
+ */
+#define IRDA_ONE_BIT_SAMPLE_DISABLE 0x00000000U /*!< One-bit sampling disabled */
+#define IRDA_ONE_BIT_SAMPLE_ENABLE USART_CR3_ONEBIT /*!< One-bit sampling enabled */
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_DMA_Tx IRDA DMA Tx
+ * @{
+ */
+#define IRDA_DMA_TX_DISABLE 0x00000000U /*!< IRDA DMA TX disabled */
+#define IRDA_DMA_TX_ENABLE USART_CR3_DMAT /*!< IRDA DMA TX enabled */
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_DMA_Rx IRDA DMA Rx
+ * @{
+ */
+#define IRDA_DMA_RX_DISABLE 0x00000000U /*!< IRDA DMA RX disabled */
+#define IRDA_DMA_RX_ENABLE USART_CR3_DMAR /*!< IRDA DMA RX enabled */
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_Request_Parameters IRDA Request Parameters
+ * @{
+ */
+#define IRDA_AUTOBAUD_REQUEST USART_RQR_ABRRQ /*!< Auto-Baud Rate Request */
+#define IRDA_RXDATA_FLUSH_REQUEST USART_RQR_RXFRQ /*!< Receive Data flush Request */
+#define IRDA_TXDATA_FLUSH_REQUEST USART_RQR_TXFRQ /*!< Transmit data flush Request */
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_Flags IRDA Flags
+ * Elements values convention: 0xXXXX
+ * - 0xXXXX : Flag mask in the ISR register
+ * @{
+ */
+#define IRDA_FLAG_REACK USART_ISR_REACK /*!< IRDA receive enable acknowledge flag */
+#define IRDA_FLAG_TEACK USART_ISR_TEACK /*!< IRDA transmit enable acknowledge flag */
+#define IRDA_FLAG_BUSY USART_ISR_BUSY /*!< IRDA busy flag */
+#define IRDA_FLAG_ABRF USART_ISR_ABRF /*!< IRDA auto Baud rate flag */
+#define IRDA_FLAG_ABRE USART_ISR_ABRE /*!< IRDA auto Baud rate error */
+#define IRDA_FLAG_TXE USART_ISR_TXE /*!< IRDA transmit data register empty */
+#define IRDA_FLAG_TC USART_ISR_TC /*!< IRDA transmission complete */
+#define IRDA_FLAG_RXNE USART_ISR_RXNE /*!< IRDA read data register not empty */
+#define IRDA_FLAG_ORE USART_ISR_ORE /*!< IRDA overrun error */
+#define IRDA_FLAG_NE USART_ISR_NE /*!< IRDA noise error */
+#define IRDA_FLAG_FE USART_ISR_FE /*!< IRDA frame error */
+#define IRDA_FLAG_PE USART_ISR_PE /*!< IRDA parity error */
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_Interrupt_definition IRDA Interrupts Definition
+ * Elements values convention: 0000ZZZZ0XXYYYYYb
+ * - YYYYY : Interrupt source position in the XX register (5bits)
+ * - XX : Interrupt source register (2bits)
+ * - 01: CR1 register
+ * - 10: CR2 register
+ * - 11: CR3 register
+ * - ZZZZ : Flag position in the ISR register(4bits)
+ * @{
+ */
+#define IRDA_IT_PE 0x0028U /*!< IRDA Parity error interruption */
+#define IRDA_IT_TXE 0x0727U /*!< IRDA Transmit data register empty interruption */
+#define IRDA_IT_TC 0x0626U /*!< IRDA Transmission complete interruption */
+#define IRDA_IT_RXNE 0x0525U /*!< IRDA Read data register not empty interruption */
+#define IRDA_IT_IDLE 0x0424U /*!< IRDA Idle interruption */
+
+/* Elements values convention: 000000000XXYYYYYb
+ - YYYYY : Interrupt source position in the XX register (5bits)
+ - XX : Interrupt source register (2bits)
+ - 01: CR1 register
+ - 10: CR2 register
+ - 11: CR3 register */
+#define IRDA_IT_ERR 0x0060U /*!< IRDA Error interruption */
+
+/* Elements values convention: 0000ZZZZ00000000b
+ - ZZZZ : Flag position in the ISR register(4bits) */
+#define IRDA_IT_ORE 0x0300U /*!< IRDA Overrun error interruption */
+#define IRDA_IT_NE 0x0200U /*!< IRDA Noise error interruption */
+#define IRDA_IT_FE 0x0100U /*!< IRDA Frame error interruption */
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_IT_CLEAR_Flags IRDA Interruption Clear Flags
+ * @{
+ */
+#define IRDA_CLEAR_PEF USART_ICR_PECF /*!< Parity Error Clear Flag */
+#define IRDA_CLEAR_FEF USART_ICR_FECF /*!< Framing Error Clear Flag */
+#define IRDA_CLEAR_NEF USART_ICR_NCF /*!< Noise Error detected Clear Flag */
+#define IRDA_CLEAR_OREF USART_ICR_ORECF /*!< OverRun Error Clear Flag */
+#define IRDA_CLEAR_IDLEF USART_ICR_IDLECF /*!< IDLE line detected Clear Flag */
+#define IRDA_CLEAR_TCF USART_ICR_TCCF /*!< Transmission Complete Clear Flag */
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_Interruption_Mask IRDA interruptions flags mask
+ * @{
+ */
+#define IRDA_IT_MASK 0x001FU /*!< IRDA Interruptions flags mask */
+#define IRDA_CR_MASK 0x00E0U /*!< IRDA control register mask */
+#define IRDA_CR_POS 5U /*!< IRDA control register position */
+#define IRDA_ISR_MASK 0x1F00U /*!< IRDA ISR register mask */
+#define IRDA_ISR_POS 8U /*!< IRDA ISR register position */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup IRDA_Exported_Macros IRDA Exported Macros
+ * @{
+ */
+
+/** @brief Reset IRDA handle state.
+ * @param __HANDLE__ IRDA handle.
+ * @retval None
+ */
+#if USE_HAL_IRDA_REGISTER_CALLBACKS == 1
+#define __HAL_IRDA_RESET_HANDLE_STATE(__HANDLE__) do{ \
+ (__HANDLE__)->gState = HAL_IRDA_STATE_RESET; \
+ (__HANDLE__)->RxState = HAL_IRDA_STATE_RESET; \
+ (__HANDLE__)->MspInitCallback = NULL; \
+ (__HANDLE__)->MspDeInitCallback = NULL; \
+ } while(0U)
+#else
+#define __HAL_IRDA_RESET_HANDLE_STATE(__HANDLE__) do{ \
+ (__HANDLE__)->gState = HAL_IRDA_STATE_RESET; \
+ (__HANDLE__)->RxState = HAL_IRDA_STATE_RESET; \
+ } while(0U)
+#endif /*USE_HAL_IRDA_REGISTER_CALLBACKS */
+
+/** @brief Flush the IRDA DR register.
+ * @param __HANDLE__ specifies the IRDA Handle.
+ * @retval None
+ */
+#define __HAL_IRDA_FLUSH_DRREGISTER(__HANDLE__) \
+ do{ \
+ SET_BIT((__HANDLE__)->Instance->RQR, IRDA_RXDATA_FLUSH_REQUEST); \
+ SET_BIT((__HANDLE__)->Instance->RQR, IRDA_TXDATA_FLUSH_REQUEST); \
+ } while(0U)
+
+/** @brief Clear the specified IRDA pending flag.
+ * @param __HANDLE__ specifies the IRDA Handle.
+ * @param __FLAG__ specifies the flag to check.
+ * This parameter can be any combination of the following values:
+ * @arg @ref IRDA_CLEAR_PEF
+ * @arg @ref IRDA_CLEAR_FEF
+ * @arg @ref IRDA_CLEAR_NEF
+ * @arg @ref IRDA_CLEAR_OREF
+ * @arg @ref IRDA_CLEAR_TCF
+ * @arg @ref IRDA_CLEAR_IDLEF
+ * @retval None
+ */
+#define __HAL_IRDA_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__))
+
+/** @brief Clear the IRDA PE pending flag.
+ * @param __HANDLE__ specifies the IRDA Handle.
+ * @retval None
+ */
+#define __HAL_IRDA_CLEAR_PEFLAG(__HANDLE__) __HAL_IRDA_CLEAR_FLAG((__HANDLE__), IRDA_CLEAR_PEF)
+
+
+/** @brief Clear the IRDA FE pending flag.
+ * @param __HANDLE__ specifies the IRDA Handle.
+ * @retval None
+ */
+#define __HAL_IRDA_CLEAR_FEFLAG(__HANDLE__) __HAL_IRDA_CLEAR_FLAG((__HANDLE__), IRDA_CLEAR_FEF)
+
+/** @brief Clear the IRDA NE pending flag.
+ * @param __HANDLE__ specifies the IRDA Handle.
+ * @retval None
+ */
+#define __HAL_IRDA_CLEAR_NEFLAG(__HANDLE__) __HAL_IRDA_CLEAR_FLAG((__HANDLE__), IRDA_CLEAR_NEF)
+
+/** @brief Clear the IRDA ORE pending flag.
+ * @param __HANDLE__ specifies the IRDA Handle.
+ * @retval None
+ */
+#define __HAL_IRDA_CLEAR_OREFLAG(__HANDLE__) __HAL_IRDA_CLEAR_FLAG((__HANDLE__), IRDA_CLEAR_OREF)
+
+/** @brief Clear the IRDA IDLE pending flag.
+ * @param __HANDLE__ specifies the IRDA Handle.
+ * @retval None
+ */
+#define __HAL_IRDA_CLEAR_IDLEFLAG(__HANDLE__) __HAL_IRDA_CLEAR_FLAG((__HANDLE__), IRDA_CLEAR_IDLEF)
+
+/** @brief Check whether the specified IRDA flag is set or not.
+ * @param __HANDLE__ specifies the IRDA Handle.
+ * @param __FLAG__ specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg @ref IRDA_FLAG_REACK Receive enable acknowledge flag
+ * @arg @ref IRDA_FLAG_TEACK Transmit enable acknowledge flag
+ * @arg @ref IRDA_FLAG_BUSY Busy flag
+ * @arg @ref IRDA_FLAG_ABRF Auto Baud rate detection flag
+ * @arg @ref IRDA_FLAG_ABRE Auto Baud rate detection error flag
+ * @arg @ref IRDA_FLAG_TXE Transmit data register empty flag
+ * @arg @ref IRDA_FLAG_TC Transmission Complete flag
+ * @arg @ref IRDA_FLAG_RXNE Receive data register not empty flag
+ * @arg @ref IRDA_FLAG_ORE OverRun Error flag
+ * @arg @ref IRDA_FLAG_NE Noise Error flag
+ * @arg @ref IRDA_FLAG_FE Framing Error flag
+ * @arg @ref IRDA_FLAG_PE Parity Error flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_IRDA_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__))
+
+
+/** @brief Enable the specified IRDA interrupt.
+ * @param __HANDLE__ specifies the IRDA Handle.
+ * @param __INTERRUPT__ specifies the IRDA interrupt source to enable.
+ * This parameter can be one of the following values:
+ * @arg @ref IRDA_IT_TXE Transmit Data Register empty interrupt
+ * @arg @ref IRDA_IT_TC Transmission complete interrupt
+ * @arg @ref IRDA_IT_RXNE Receive Data register not empty interrupt
+ * @arg @ref IRDA_IT_IDLE Idle line detection interrupt
+ * @arg @ref IRDA_IT_PE Parity Error interrupt
+ * @arg @ref IRDA_IT_ERR Error interrupt(Frame error, noise error, overrun error)
+ * @retval None
+ */
+#define __HAL_IRDA_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((((__INTERRUPT__) & IRDA_CR_MASK) >> IRDA_CR_POS) == 1U)? ((__HANDLE__)->Instance->CR1 |= ((uint32_t)1U << ((__INTERRUPT__) & IRDA_IT_MASK))): \
+ ((((__INTERRUPT__) & IRDA_CR_MASK) >> IRDA_CR_POS) == 2U)? ((__HANDLE__)->Instance->CR2 |= ((uint32_t)1U << ((__INTERRUPT__) & IRDA_IT_MASK))): \
+ ((__HANDLE__)->Instance->CR3 |= ((uint32_t)1U << ((__INTERRUPT__) & IRDA_IT_MASK))))
+
+/** @brief Disable the specified IRDA interrupt.
+ * @param __HANDLE__ specifies the IRDA Handle.
+ * @param __INTERRUPT__ specifies the IRDA interrupt source to disable.
+ * This parameter can be one of the following values:
+ * @arg @ref IRDA_IT_TXE Transmit Data Register empty interrupt
+ * @arg @ref IRDA_IT_TC Transmission complete interrupt
+ * @arg @ref IRDA_IT_RXNE Receive Data register not empty interrupt
+ * @arg @ref IRDA_IT_IDLE Idle line detection interrupt
+ * @arg @ref IRDA_IT_PE Parity Error interrupt
+ * @arg @ref IRDA_IT_ERR Error interrupt(Frame error, noise error, overrun error)
+ * @retval None
+ */
+#define __HAL_IRDA_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((((__INTERRUPT__) & IRDA_CR_MASK) >> IRDA_CR_POS) == 1U)? ((__HANDLE__)->Instance->CR1 &= ~ ((uint32_t)1U << ((__INTERRUPT__) & IRDA_IT_MASK))): \
+ ((((__INTERRUPT__) & IRDA_CR_MASK) >> IRDA_CR_POS) == 2U)? ((__HANDLE__)->Instance->CR2 &= ~ ((uint32_t)1U << ((__INTERRUPT__) & IRDA_IT_MASK))): \
+ ((__HANDLE__)->Instance->CR3 &= ~ ((uint32_t)1U << ((__INTERRUPT__) & IRDA_IT_MASK))))
+
+
+/** @brief Check whether the specified IRDA interrupt has occurred or not.
+ * @param __HANDLE__ specifies the IRDA Handle.
+ * @param __INTERRUPT__ specifies the IRDA interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg @ref IRDA_IT_TXE Transmit Data Register empty interrupt
+ * @arg @ref IRDA_IT_TC Transmission complete interrupt
+ * @arg @ref IRDA_IT_RXNE Receive Data register not empty interrupt
+ * @arg @ref IRDA_IT_IDLE Idle line detection interrupt
+ * @arg @ref IRDA_IT_ORE OverRun Error interrupt
+ * @arg @ref IRDA_IT_NE Noise Error interrupt
+ * @arg @ref IRDA_IT_FE Framing Error interrupt
+ * @arg @ref IRDA_IT_PE Parity Error interrupt
+ * @retval The new state of __IT__ (SET or RESET).
+ */
+#define __HAL_IRDA_GET_IT(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->ISR\
+ & (0x01U << (((__INTERRUPT__) & IRDA_ISR_MASK)>> IRDA_ISR_POS))) != 0U) ? SET : RESET)
+
+/** @brief Check whether the specified IRDA interrupt source is enabled or not.
+ * @param __HANDLE__ specifies the IRDA Handle.
+ * @param __INTERRUPT__ specifies the IRDA interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg @ref IRDA_IT_TXE Transmit Data Register empty interrupt
+ * @arg @ref IRDA_IT_TC Transmission complete interrupt
+ * @arg @ref IRDA_IT_RXNE Receive Data register not empty interrupt
+ * @arg @ref IRDA_IT_IDLE Idle line detection interrupt
+ * @arg @ref IRDA_IT_ERR Framing, overrun or noise error interrupt
+ * @arg @ref IRDA_IT_PE Parity Error interrupt
+ * @retval The new state of __IT__ (SET or RESET).
+ */
+#define __HAL_IRDA_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((((((__INTERRUPT__) & IRDA_CR_MASK) >> IRDA_CR_POS) == 0x01U)? (__HANDLE__)->Instance->CR1 : \
+ (((((__INTERRUPT__) & IRDA_CR_MASK) >> IRDA_CR_POS) == 0x02U)? (__HANDLE__)->Instance->CR2 : \
+ (__HANDLE__)->Instance->CR3)) & ((uint32_t)0x01U << (((uint16_t)(__INTERRUPT__)) & IRDA_IT_MASK))) != 0U) ? SET : RESET)
+
+/** @brief Clear the specified IRDA ISR flag, in setting the proper ICR register flag.
+ * @param __HANDLE__ specifies the IRDA Handle.
+ * @param __IT_CLEAR__ specifies the interrupt clear register flag that needs to be set
+ * to clear the corresponding interrupt
+ * This parameter can be one of the following values:
+ * @arg @ref IRDA_CLEAR_PEF Parity Error Clear Flag
+ * @arg @ref IRDA_CLEAR_FEF Framing Error Clear Flag
+ * @arg @ref IRDA_CLEAR_NEF Noise detected Clear Flag
+ * @arg @ref IRDA_CLEAR_OREF OverRun Error Clear Flag
+ * @arg @ref IRDA_CLEAR_TCF Transmission Complete Clear Flag
+ * @retval None
+ */
+#define __HAL_IRDA_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR = (uint32_t)(__IT_CLEAR__))
+
+
+/** @brief Set a specific IRDA request flag.
+ * @param __HANDLE__ specifies the IRDA Handle.
+ * @param __REQ__ specifies the request flag to set
+ * This parameter can be one of the following values:
+ * @arg @ref IRDA_AUTOBAUD_REQUEST Auto-Baud Rate Request
+ * @arg @ref IRDA_RXDATA_FLUSH_REQUEST Receive Data flush Request
+ * @arg @ref IRDA_TXDATA_FLUSH_REQUEST Transmit data flush Request
+ * @retval None
+ */
+#define __HAL_IRDA_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint16_t)(__REQ__))
+
+/** @brief Enable the IRDA one bit sample method.
+ * @param __HANDLE__ specifies the IRDA Handle.
+ * @retval None
+ */
+#define __HAL_IRDA_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT)
+
+/** @brief Disable the IRDA one bit sample method.
+ * @param __HANDLE__ specifies the IRDA Handle.
+ * @retval None
+ */
+#define __HAL_IRDA_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3\
+ &= (uint32_t)~((uint32_t)USART_CR3_ONEBIT))
+
+/** @brief Enable UART/USART associated to IRDA Handle.
+ * @param __HANDLE__ specifies the IRDA Handle.
+ * @retval None
+ */
+#define __HAL_IRDA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE)
+
+/** @brief Disable UART/USART associated to IRDA Handle.
+ * @param __HANDLE__ specifies the IRDA Handle.
+ * @retval None
+ */
+#define __HAL_IRDA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE)
+
+/**
+ * @}
+ */
+
+/* Private macros --------------------------------------------------------*/
+/** @addtogroup IRDA_Private_Macros
+ * @{
+ */
+
+/** @brief Ensure that IRDA Baud rate is less or equal to maximum value.
+ * @param __BAUDRATE__ specifies the IRDA Baudrate set by the user.
+ * @retval True or False
+ */
+#define IS_IRDA_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) < 115201U)
+
+/** @brief Ensure that IRDA prescaler value is strictly larger than 0.
+ * @param __PRESCALER__ specifies the IRDA prescaler value set by the user.
+ * @retval True or False
+ */
+#define IS_IRDA_PRESCALER(__PRESCALER__) ((__PRESCALER__) > 0U)
+
+/** @brief Ensure that IRDA frame parity is valid.
+ * @param __PARITY__ IRDA frame parity.
+ * @retval SET (__PARITY__ is valid) or RESET (__PARITY__ is invalid)
+ */
+#define IS_IRDA_PARITY(__PARITY__) (((__PARITY__) == IRDA_PARITY_NONE) || \
+ ((__PARITY__) == IRDA_PARITY_EVEN) || \
+ ((__PARITY__) == IRDA_PARITY_ODD))
+
+/** @brief Ensure that IRDA communication mode is valid.
+ * @param __MODE__ IRDA communication mode.
+ * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid)
+ */
+#define IS_IRDA_TX_RX_MODE(__MODE__) ((((__MODE__)\
+ & (~((uint32_t)(IRDA_MODE_TX_RX)))) == 0x00U) && ((__MODE__) != 0x00U))
+
+/** @brief Ensure that IRDA power mode is valid.
+ * @param __MODE__ IRDA power mode.
+ * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid)
+ */
+#define IS_IRDA_POWERMODE(__MODE__) (((__MODE__) == IRDA_POWERMODE_LOWPOWER) || \
+ ((__MODE__) == IRDA_POWERMODE_NORMAL))
+
+/** @brief Ensure that IRDA state is valid.
+ * @param __STATE__ IRDA state mode.
+ * @retval SET (__STATE__ is valid) or RESET (__STATE__ is invalid)
+ */
+#define IS_IRDA_STATE(__STATE__) (((__STATE__) == IRDA_STATE_DISABLE) || \
+ ((__STATE__) == IRDA_STATE_ENABLE))
+
+/** @brief Ensure that IRDA associated UART/USART mode is valid.
+ * @param __MODE__ IRDA associated UART/USART mode.
+ * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid)
+ */
+#define IS_IRDA_MODE(__MODE__) (((__MODE__) == IRDA_MODE_DISABLE) || \
+ ((__MODE__) == IRDA_MODE_ENABLE))
+
+/** @brief Ensure that IRDA sampling rate is valid.
+ * @param __ONEBIT__ IRDA sampling rate.
+ * @retval SET (__ONEBIT__ is valid) or RESET (__ONEBIT__ is invalid)
+ */
+#define IS_IRDA_ONE_BIT_SAMPLE(__ONEBIT__) (((__ONEBIT__) == IRDA_ONE_BIT_SAMPLE_DISABLE) || \
+ ((__ONEBIT__) == IRDA_ONE_BIT_SAMPLE_ENABLE))
+
+/** @brief Ensure that IRDA DMA TX mode is valid.
+ * @param __DMATX__ IRDA DMA TX mode.
+ * @retval SET (__DMATX__ is valid) or RESET (__DMATX__ is invalid)
+ */
+#define IS_IRDA_DMA_TX(__DMATX__) (((__DMATX__) == IRDA_DMA_TX_DISABLE) || \
+ ((__DMATX__) == IRDA_DMA_TX_ENABLE))
+
+/** @brief Ensure that IRDA DMA RX mode is valid.
+ * @param __DMARX__ IRDA DMA RX mode.
+ * @retval SET (__DMARX__ is valid) or RESET (__DMARX__ is invalid)
+ */
+#define IS_IRDA_DMA_RX(__DMARX__) (((__DMARX__) == IRDA_DMA_RX_DISABLE) || \
+ ((__DMARX__) == IRDA_DMA_RX_ENABLE))
+
+/** @brief Ensure that IRDA request is valid.
+ * @param __PARAM__ IRDA request.
+ * @retval SET (__PARAM__ is valid) or RESET (__PARAM__ is invalid)
+ */
+#define IS_IRDA_REQUEST_PARAMETER(__PARAM__) (((__PARAM__) == IRDA_AUTOBAUD_REQUEST) || \
+ ((__PARAM__) == IRDA_RXDATA_FLUSH_REQUEST) || \
+ ((__PARAM__) == IRDA_TXDATA_FLUSH_REQUEST))
+/**
+ * @}
+ */
+
+/* Include IRDA HAL Extended module */
+#include "stm32f0xx_hal_irda_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup IRDA_Exported_Functions IRDA Exported Functions
+ * @{
+ */
+
+/** @addtogroup IRDA_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+
+/* Initialization and de-initialization functions ****************************/
+HAL_StatusTypeDef HAL_IRDA_Init(IRDA_HandleTypeDef *hirda);
+HAL_StatusTypeDef HAL_IRDA_DeInit(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_MspInit(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_MspDeInit(IRDA_HandleTypeDef *hirda);
+
+#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1)
+/* Callbacks Register/UnRegister functions ***********************************/
+HAL_StatusTypeDef HAL_IRDA_RegisterCallback(IRDA_HandleTypeDef *hirda, HAL_IRDA_CallbackIDTypeDef CallbackID,
+ pIRDA_CallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_IRDA_UnRegisterCallback(IRDA_HandleTypeDef *hirda, HAL_IRDA_CallbackIDTypeDef CallbackID);
+#endif /* USE_HAL_IRDA_REGISTER_CALLBACKS */
+
+/**
+ * @}
+ */
+
+/** @addtogroup IRDA_Exported_Functions_Group2 IO operation functions
+ * @{
+ */
+
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_IRDA_Transmit(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_IRDA_Receive(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_IRDA_Transmit_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_IRDA_Receive_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_IRDA_Transmit_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_IRDA_Receive_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_IRDA_DMAPause(IRDA_HandleTypeDef *hirda);
+HAL_StatusTypeDef HAL_IRDA_DMAResume(IRDA_HandleTypeDef *hirda);
+HAL_StatusTypeDef HAL_IRDA_DMAStop(IRDA_HandleTypeDef *hirda);
+/* Transfer Abort functions */
+HAL_StatusTypeDef HAL_IRDA_Abort(IRDA_HandleTypeDef *hirda);
+HAL_StatusTypeDef HAL_IRDA_AbortTransmit(IRDA_HandleTypeDef *hirda);
+HAL_StatusTypeDef HAL_IRDA_AbortReceive(IRDA_HandleTypeDef *hirda);
+HAL_StatusTypeDef HAL_IRDA_Abort_IT(IRDA_HandleTypeDef *hirda);
+HAL_StatusTypeDef HAL_IRDA_AbortTransmit_IT(IRDA_HandleTypeDef *hirda);
+HAL_StatusTypeDef HAL_IRDA_AbortReceive_IT(IRDA_HandleTypeDef *hirda);
+
+void HAL_IRDA_IRQHandler(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_TxCpltCallback(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_RxCpltCallback(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_TxHalfCpltCallback(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_RxHalfCpltCallback(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_ErrorCallback(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_AbortCpltCallback(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_AbortTransmitCpltCallback(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_AbortReceiveCpltCallback(IRDA_HandleTypeDef *hirda);
+
+/**
+ * @}
+ */
+
+/* Peripheral Control functions ************************************************/
+
+/** @addtogroup IRDA_Exported_Functions_Group4 Peripheral State and Error functions
+ * @{
+ */
+
+/* Peripheral State and Error functions ***************************************/
+HAL_IRDA_StateTypeDef HAL_IRDA_GetState(IRDA_HandleTypeDef *hirda);
+uint32_t HAL_IRDA_GetError(IRDA_HandleTypeDef *hirda);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* USART_IRDA_SUPPORT */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32F0xx_HAL_IRDA_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_irda_ex.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_irda_ex.h
new file mode 100644
index 0000000..8159228
--- /dev/null
+++ b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_irda_ex.h
@@ -0,0 +1,399 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_irda_ex.h
+ * @author MCD Application Team
+ * @brief Header file of IRDA HAL Extended module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32F0xx_HAL_IRDA_EX_H
+#define STM32F0xx_HAL_IRDA_EX_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#if defined(USART_IRDA_SUPPORT)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup IRDAEx IRDAEx
+ * @brief IRDA Extended HAL module driver
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup IRDAEx_Extended_Exported_Constants IRDAEx Extended Exported Constants
+ * @{
+ */
+
+/** @defgroup IRDAEx_Word_Length IRDAEx Word Length
+ * @{
+ */
+#if defined(USART_CR1_M1)&&defined(USART_CR1_M0)
+#define IRDA_WORDLENGTH_7B USART_CR1_M1 /*!< 7-bit long frame */
+#define IRDA_WORDLENGTH_8B 0x00000000U /*!< 8-bit long frame */
+#define IRDA_WORDLENGTH_9B USART_CR1_M0 /*!< 9-bit long frame */
+#elif defined(USART_CR1_M)
+#define IRDA_WORDLENGTH_8B (0x00000000U) /*!< 8-bit long frame */
+#define IRDA_WORDLENGTH_9B ((uint32_t)USART_CR1_M) /*!< 9-bit long frame */
+#endif
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+
+/* Private macros ------------------------------------------------------------*/
+
+/** @defgroup IRDAEx_Private_Macros IRDAEx Private Macros
+ * @{
+ */
+
+/** @brief Report the IRDA clock source.
+ * @param __HANDLE__ specifies the IRDA Handle.
+ * @param __CLOCKSOURCE__ output variable.
+ * @retval IRDA clocking source, written in __CLOCKSOURCE__.
+ */
+
+#if defined(STM32F031x6) || defined(STM32F038xx)
+#define IRDA_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } while(0)
+#elif defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F051x8) || defined (STM32F058xx)
+#define IRDA_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK1; \
+ } \
+ else \
+ { \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_UNDEFINED; \
+ } \
+ } while(0)
+#elif defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)
+#define IRDA_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ switch(__HAL_RCC_GET_USART2_SOURCE()) \
+ { \
+ case RCC_USART2CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART2CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART2CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART2CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART3) \
+ { \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART4) \
+ { \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK1; \
+ } \
+ else \
+ { \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_UNDEFINED; \
+ } \
+ } while(0)
+#elif defined(STM32F091xC) || defined(STM32F098xx)
+#define IRDA_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ switch(__HAL_RCC_GET_USART2_SOURCE()) \
+ { \
+ case RCC_USART2CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART2CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART2CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART2CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART3) \
+ { \
+ switch(__HAL_RCC_GET_USART3_SOURCE()) \
+ { \
+ case RCC_USART3CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART3CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART3CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART3CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART4) \
+ { \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART5) \
+ { \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART6) \
+ { \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART7) \
+ { \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART8) \
+ { \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK1; \
+ } \
+ else \
+ { \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_UNDEFINED; \
+ } \
+ } while(0)
+
+#endif /* defined(STM32F031x6) || defined(STM32F038xx) */
+
+
+/** @brief Compute the mask to apply to retrieve the received data
+ * according to the word length and to the parity bits activation.
+ * @note If PCE = 1, the parity bit is not included in the data extracted
+ * by the reception API().
+ * This masking operation is not carried out in the case of
+ * DMA transfers.
+ * @param __HANDLE__ specifies the IRDA Handle.
+ * @retval None, the mask to apply to the associated UART RDR register is stored in (__HANDLE__)->Mask field.
+ */
+#if defined(USART_CR1_M1)&&defined(USART_CR1_M0)
+#define IRDA_MASK_COMPUTATION(__HANDLE__) \
+ do { \
+ if ((__HANDLE__)->Init.WordLength == IRDA_WORDLENGTH_9B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == IRDA_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x01FFU ; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x00FFU ; \
+ } \
+ } \
+ else if ((__HANDLE__)->Init.WordLength == IRDA_WORDLENGTH_8B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == IRDA_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x00FFU ; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x007FU ; \
+ } \
+ } \
+ else if ((__HANDLE__)->Init.WordLength == IRDA_WORDLENGTH_7B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == IRDA_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x007FU ; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x003FU ; \
+ } \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x0000U; \
+ } \
+ } while(0U)
+#elif defined(USART_CR1_M)
+#define IRDA_MASK_COMPUTATION(__HANDLE__) \
+ do { \
+ if ((__HANDLE__)->Init.WordLength == IRDA_WORDLENGTH_9B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == IRDA_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x01FFU ; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x00FFU ; \
+ } \
+ } \
+ else if ((__HANDLE__)->Init.WordLength == IRDA_WORDLENGTH_8B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == IRDA_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x00FFU ; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x007FU ; \
+ } \
+ } \
+} while(0U)
+#endif
+
+/** @brief Ensure that IRDA frame length is valid.
+ * @param __LENGTH__ IRDA frame length.
+ * @retval SET (__LENGTH__ is valid) or RESET (__LENGTH__ is invalid)
+ */
+#if defined(USART_CR1_M1)&&defined(USART_CR1_M0)
+#define IS_IRDA_WORD_LENGTH(__LENGTH__) (((__LENGTH__) == IRDA_WORDLENGTH_7B) || \
+ ((__LENGTH__) == IRDA_WORDLENGTH_8B) || \
+ ((__LENGTH__) == IRDA_WORDLENGTH_9B))
+#elif defined(USART_CR1_M)
+#define IS_IRDA_WORD_LENGTH(__LENGTH__) (((__LENGTH__) == IRDA_WORDLENGTH_8B) || \
+ ((__LENGTH__) == IRDA_WORDLENGTH_9B))
+#endif
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* USART_IRDA_SUPPORT */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32F0xx_HAL_IRDA_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_iwdg.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_iwdg.h
new file mode 100644
index 0000000..b282b64
--- /dev/null
+++ b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_iwdg.h
@@ -0,0 +1,242 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_iwdg.h
+ * @author MCD Application Team
+ * @brief Header file of IWDG HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32F0xx_HAL_IWDG_H
+#define STM32F0xx_HAL_IWDG_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup IWDG IWDG
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup IWDG_Exported_Types IWDG Exported Types
+ * @{
+ */
+
+/**
+ * @brief IWDG Init structure definition
+ */
+typedef struct
+{
+ uint32_t Prescaler; /*!< Select the prescaler of the IWDG.
+ This parameter can be a value of @ref IWDG_Prescaler */
+
+ uint32_t Reload; /*!< Specifies the IWDG down-counter reload value.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0x0FFF */
+
+ uint32_t Window; /*!< Specifies the window value to be compared to the down-counter.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0x0FFF */
+
+} IWDG_InitTypeDef;
+
+/**
+ * @brief IWDG Handle Structure definition
+ */
+typedef struct
+{
+ IWDG_TypeDef *Instance; /*!< Register base address */
+
+ IWDG_InitTypeDef Init; /*!< IWDG required parameters */
+} IWDG_HandleTypeDef;
+
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup IWDG_Exported_Constants IWDG Exported Constants
+ * @{
+ */
+
+/** @defgroup IWDG_Prescaler IWDG Prescaler
+ * @{
+ */
+#define IWDG_PRESCALER_4 0x00000000u /*!< IWDG prescaler set to 4 */
+#define IWDG_PRESCALER_8 IWDG_PR_PR_0 /*!< IWDG prescaler set to 8 */
+#define IWDG_PRESCALER_16 IWDG_PR_PR_1 /*!< IWDG prescaler set to 16 */
+#define IWDG_PRESCALER_32 (IWDG_PR_PR_1 | IWDG_PR_PR_0) /*!< IWDG prescaler set to 32 */
+#define IWDG_PRESCALER_64 IWDG_PR_PR_2 /*!< IWDG prescaler set to 64 */
+#define IWDG_PRESCALER_128 (IWDG_PR_PR_2 | IWDG_PR_PR_0) /*!< IWDG prescaler set to 128 */
+#define IWDG_PRESCALER_256 (IWDG_PR_PR_2 | IWDG_PR_PR_1) /*!< IWDG prescaler set to 256 */
+
+/**
+ * @}
+ */
+
+/** @defgroup IWDG_Window_option IWDG Window option
+ * @{
+ */
+#define IWDG_WINDOW_DISABLE IWDG_WINR_WIN
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup IWDG_Exported_Macros IWDG Exported Macros
+ * @{
+ */
+
+/**
+ * @brief Enable the IWDG peripheral.
+ * @param __HANDLE__ IWDG handle
+ * @retval None
+ */
+#define __HAL_IWDG_START(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, IWDG_KEY_ENABLE)
+
+/**
+ * @brief Reload IWDG counter with value defined in the reload register
+ * (write access to IWDG_PR, IWDG_RLR and IWDG_WINR registers disabled).
+ * @param __HANDLE__ IWDG handle
+ * @retval None
+ */
+#define __HAL_IWDG_RELOAD_COUNTER(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, IWDG_KEY_RELOAD)
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup IWDG_Exported_Functions IWDG Exported Functions
+ * @{
+ */
+
+/** @defgroup IWDG_Exported_Functions_Group1 Initialization and Start functions
+ * @{
+ */
+/* Initialization/Start functions ********************************************/
+HAL_StatusTypeDef HAL_IWDG_Init(IWDG_HandleTypeDef *hiwdg);
+/**
+ * @}
+ */
+
+/** @defgroup IWDG_Exported_Functions_Group2 IO operation functions
+ * @{
+ */
+/* I/O operation functions ****************************************************/
+HAL_StatusTypeDef HAL_IWDG_Refresh(IWDG_HandleTypeDef *hiwdg);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup IWDG_Private_Constants IWDG Private Constants
+ * @{
+ */
+
+/**
+ * @brief IWDG Key Register BitMask
+ */
+#define IWDG_KEY_RELOAD 0x0000AAAAu /*!< IWDG Reload Counter Enable */
+#define IWDG_KEY_ENABLE 0x0000CCCCu /*!< IWDG Peripheral Enable */
+#define IWDG_KEY_WRITE_ACCESS_ENABLE 0x00005555u /*!< IWDG KR Write Access Enable */
+#define IWDG_KEY_WRITE_ACCESS_DISABLE 0x00000000u /*!< IWDG KR Write Access Disable */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup IWDG_Private_Macros IWDG Private Macros
+ * @{
+ */
+
+/**
+ * @brief Enable write access to IWDG_PR, IWDG_RLR and IWDG_WINR registers.
+ * @param __HANDLE__ IWDG handle
+ * @retval None
+ */
+#define IWDG_ENABLE_WRITE_ACCESS(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, IWDG_KEY_WRITE_ACCESS_ENABLE)
+
+/**
+ * @brief Disable write access to IWDG_PR, IWDG_RLR and IWDG_WINR registers.
+ * @param __HANDLE__ IWDG handle
+ * @retval None
+ */
+#define IWDG_DISABLE_WRITE_ACCESS(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, IWDG_KEY_WRITE_ACCESS_DISABLE)
+
+/**
+ * @brief Check IWDG prescaler value.
+ * @param __PRESCALER__ IWDG prescaler value
+ * @retval None
+ */
+#define IS_IWDG_PRESCALER(__PRESCALER__) (((__PRESCALER__) == IWDG_PRESCALER_4) || \
+ ((__PRESCALER__) == IWDG_PRESCALER_8) || \
+ ((__PRESCALER__) == IWDG_PRESCALER_16) || \
+ ((__PRESCALER__) == IWDG_PRESCALER_32) || \
+ ((__PRESCALER__) == IWDG_PRESCALER_64) || \
+ ((__PRESCALER__) == IWDG_PRESCALER_128)|| \
+ ((__PRESCALER__) == IWDG_PRESCALER_256))
+
+/**
+ * @brief Check IWDG reload value.
+ * @param __RELOAD__ IWDG reload value
+ * @retval None
+ */
+#define IS_IWDG_RELOAD(__RELOAD__) ((__RELOAD__) <= IWDG_RLR_RL)
+
+/**
+ * @brief Check IWDG window value.
+ * @param __WINDOW__ IWDG window value
+ * @retval None
+ */
+#define IS_IWDG_WINDOW(__WINDOW__) ((__WINDOW__) <= IWDG_WINR_WIN)
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32F0xx_HAL_IWDG_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pcd.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pcd.h
new file mode 100644
index 0000000..00b7047
--- /dev/null
+++ b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pcd.h
@@ -0,0 +1,945 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_pcd.h
+ * @author MCD Application Team
+ * @brief Header file of PCD HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32F0xx_HAL_PCD_H
+#define STM32F0xx_HAL_PCD_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_ll_usb.h"
+
+#if defined (USB)
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup PCD
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup PCD_Exported_Types PCD Exported Types
+ * @{
+ */
+
+/**
+ * @brief PCD State structure definition
+ */
+typedef enum
+{
+ HAL_PCD_STATE_RESET = 0x00,
+ HAL_PCD_STATE_READY = 0x01,
+ HAL_PCD_STATE_ERROR = 0x02,
+ HAL_PCD_STATE_BUSY = 0x03,
+ HAL_PCD_STATE_TIMEOUT = 0x04
+} PCD_StateTypeDef;
+
+/* Device LPM suspend state */
+typedef enum
+{
+ LPM_L0 = 0x00, /* on */
+ LPM_L1 = 0x01, /* LPM L1 sleep */
+ LPM_L2 = 0x02, /* suspend */
+ LPM_L3 = 0x03, /* off */
+} PCD_LPM_StateTypeDef;
+
+typedef enum
+{
+ PCD_LPM_L0_ACTIVE = 0x00, /* on */
+ PCD_LPM_L1_ACTIVE = 0x01, /* LPM L1 sleep */
+} PCD_LPM_MsgTypeDef;
+
+typedef enum
+{
+ PCD_BCD_ERROR = 0xFF,
+ PCD_BCD_CONTACT_DETECTION = 0xFE,
+ PCD_BCD_STD_DOWNSTREAM_PORT = 0xFD,
+ PCD_BCD_CHARGING_DOWNSTREAM_PORT = 0xFC,
+ PCD_BCD_DEDICATED_CHARGING_PORT = 0xFB,
+ PCD_BCD_DISCOVERY_COMPLETED = 0x00,
+
+} PCD_BCD_MsgTypeDef;
+
+
+
+
+
+typedef USB_TypeDef PCD_TypeDef;
+typedef USB_CfgTypeDef PCD_InitTypeDef;
+typedef USB_EPTypeDef PCD_EPTypeDef;
+
+
+/**
+ * @brief PCD Handle Structure definition
+ */
+#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
+typedef struct __PCD_HandleTypeDef
+#else
+typedef struct
+#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
+{
+ PCD_TypeDef *Instance; /*!< Register base address */
+ PCD_InitTypeDef Init; /*!< PCD required parameters */
+ __IO uint8_t USB_Address; /*!< USB Address */
+ PCD_EPTypeDef IN_ep[8]; /*!< IN endpoint parameters */
+ PCD_EPTypeDef OUT_ep[8]; /*!< OUT endpoint parameters */
+ HAL_LockTypeDef Lock; /*!< PCD peripheral status */
+ __IO PCD_StateTypeDef State; /*!< PCD communication state */
+ __IO uint32_t ErrorCode; /*!< PCD Error code */
+ uint32_t Setup[12]; /*!< Setup packet buffer */
+ PCD_LPM_StateTypeDef LPM_State; /*!< LPM State */
+ uint32_t BESL;
+
+
+ uint32_t lpm_active; /*!< Enable or disable the Link Power Management .
+ This parameter can be set to ENABLE or DISABLE */
+
+ uint32_t battery_charging_active; /*!< Enable or disable Battery charging.
+ This parameter can be set to ENABLE or DISABLE */
+ void *pData; /*!< Pointer to upper stack Handler */
+
+#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
+ void (* SOFCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD SOF callback */
+ void (* SetupStageCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Setup Stage callback */
+ void (* ResetCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Reset callback */
+ void (* SuspendCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Suspend callback */
+ void (* ResumeCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Resume callback */
+ void (* ConnectCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Connect callback */
+ void (* DisconnectCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Disconnect callback */
+
+ void (* DataOutStageCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< USB OTG PCD Data OUT Stage callback */
+ void (* DataInStageCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< USB OTG PCD Data IN Stage callback */
+ void (* ISOOUTIncompleteCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< USB OTG PCD ISO OUT Incomplete callback */
+ void (* ISOINIncompleteCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< USB OTG PCD ISO IN Incomplete callback */
+ void (* BCDCallback)(struct __PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg); /*!< USB OTG PCD BCD callback */
+ void (* LPMCallback)(struct __PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg); /*!< USB OTG PCD LPM callback */
+
+ void (* MspInitCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Msp Init callback */
+ void (* MspDeInitCallback)(struct __PCD_HandleTypeDef *hpcd); /*!< USB OTG PCD Msp DeInit callback */
+#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
+} PCD_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+/* Include PCD HAL Extended module */
+#include "stm32f0xx_hal_pcd_ex.h"
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup PCD_Exported_Constants PCD Exported Constants
+ * @{
+ */
+
+/** @defgroup PCD_Speed PCD Speed
+ * @{
+ */
+#define PCD_SPEED_FULL USBD_FS_SPEED
+/**
+ * @}
+ */
+
+/** @defgroup PCD_PHY_Module PCD PHY Module
+ * @{
+ */
+#define PCD_PHY_ULPI 1U
+#define PCD_PHY_EMBEDDED 2U
+#define PCD_PHY_UTMI 3U
+/**
+ * @}
+ */
+
+/** @defgroup PCD_Error_Code_definition PCD Error Code definition
+ * @brief PCD Error Code definition
+ * @{
+ */
+#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
+#define HAL_PCD_ERROR_INVALID_CALLBACK (0x00000010U) /*!< Invalid Callback error */
+#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup PCD_Exported_Macros PCD Exported Macros
+ * @brief macros to handle interrupts and specific clock configurations
+ * @{
+ */
+
+
+#define __HAL_PCD_ENABLE(__HANDLE__) (void)USB_EnableGlobalInt ((__HANDLE__)->Instance)
+#define __HAL_PCD_DISABLE(__HANDLE__) (void)USB_DisableGlobalInt ((__HANDLE__)->Instance)
+#define __HAL_PCD_GET_FLAG(__HANDLE__, __INTERRUPT__) ((USB_ReadInterrupts((__HANDLE__)->Instance) & (__INTERRUPT__)) == (__INTERRUPT__))
+#define __HAL_PCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->ISTR) &= ~(__INTERRUPT__))
+
+#define __HAL_USB_WAKEUP_EXTI_ENABLE_IT() EXTI->IMR |= USB_WAKEUP_EXTI_LINE
+#define __HAL_USB_WAKEUP_EXTI_DISABLE_IT() EXTI->IMR &= ~(USB_WAKEUP_EXTI_LINE)
+
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup PCD_Exported_Functions PCD Exported Functions
+ * @{
+ */
+
+/* Initialization/de-initialization functions ********************************/
+/** @addtogroup PCD_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_DeInit(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd);
+
+#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
+/** @defgroup HAL_PCD_Callback_ID_enumeration_definition HAL USB OTG PCD Callback ID enumeration definition
+ * @brief HAL USB OTG PCD Callback ID enumeration definition
+ * @{
+ */
+typedef enum
+{
+ HAL_PCD_SOF_CB_ID = 0x01, /*!< USB PCD SOF callback ID */
+ HAL_PCD_SETUPSTAGE_CB_ID = 0x02, /*!< USB PCD Setup Stage callback ID */
+ HAL_PCD_RESET_CB_ID = 0x03, /*!< USB PCD Reset callback ID */
+ HAL_PCD_SUSPEND_CB_ID = 0x04, /*!< USB PCD Suspend callback ID */
+ HAL_PCD_RESUME_CB_ID = 0x05, /*!< USB PCD Resume callback ID */
+ HAL_PCD_CONNECT_CB_ID = 0x06, /*!< USB PCD Connect callback ID */
+ HAL_PCD_DISCONNECT_CB_ID = 0x07, /*!< USB PCD Disconnect callback ID */
+
+ HAL_PCD_MSPINIT_CB_ID = 0x08, /*!< USB PCD MspInit callback ID */
+ HAL_PCD_MSPDEINIT_CB_ID = 0x09 /*!< USB PCD MspDeInit callback ID */
+
+} HAL_PCD_CallbackIDTypeDef;
+/**
+ * @}
+ */
+
+/** @defgroup HAL_PCD_Callback_pointer_definition HAL USB OTG PCD Callback pointer definition
+ * @brief HAL USB OTG PCD Callback pointer definition
+ * @{
+ */
+
+typedef void (*pPCD_CallbackTypeDef)(PCD_HandleTypeDef *hpcd); /*!< pointer to a common USB OTG PCD callback function */
+typedef void (*pPCD_DataOutStageCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< pointer to USB OTG PCD Data OUT Stage callback */
+typedef void (*pPCD_DataInStageCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< pointer to USB OTG PCD Data IN Stage callback */
+typedef void (*pPCD_IsoOutIncpltCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< pointer to USB OTG PCD ISO OUT Incomplete callback */
+typedef void (*pPCD_IsoInIncpltCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum); /*!< pointer to USB OTG PCD ISO IN Incomplete callback */
+typedef void (*pPCD_LpmCallbackTypeDef)(PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg); /*!< pointer to USB OTG PCD LPM callback */
+typedef void (*pPCD_BcdCallbackTypeDef)(PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg); /*!< pointer to USB OTG PCD BCD callback */
+
+/**
+ * @}
+ */
+
+HAL_StatusTypeDef HAL_PCD_RegisterCallback(PCD_HandleTypeDef *hpcd, HAL_PCD_CallbackIDTypeDef CallbackID, pPCD_CallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_PCD_UnRegisterCallback(PCD_HandleTypeDef *hpcd, HAL_PCD_CallbackIDTypeDef CallbackID);
+
+HAL_StatusTypeDef HAL_PCD_RegisterDataOutStageCallback(PCD_HandleTypeDef *hpcd, pPCD_DataOutStageCallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_PCD_UnRegisterDataOutStageCallback(PCD_HandleTypeDef *hpcd);
+
+HAL_StatusTypeDef HAL_PCD_RegisterDataInStageCallback(PCD_HandleTypeDef *hpcd, pPCD_DataInStageCallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_PCD_UnRegisterDataInStageCallback(PCD_HandleTypeDef *hpcd);
+
+HAL_StatusTypeDef HAL_PCD_RegisterIsoOutIncpltCallback(PCD_HandleTypeDef *hpcd, pPCD_IsoOutIncpltCallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_PCD_UnRegisterIsoOutIncpltCallback(PCD_HandleTypeDef *hpcd);
+
+HAL_StatusTypeDef HAL_PCD_RegisterIsoInIncpltCallback(PCD_HandleTypeDef *hpcd, pPCD_IsoInIncpltCallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_PCD_UnRegisterIsoInIncpltCallback(PCD_HandleTypeDef *hpcd);
+
+HAL_StatusTypeDef HAL_PCD_RegisterBcdCallback(PCD_HandleTypeDef *hpcd, pPCD_BcdCallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_PCD_UnRegisterBcdCallback(PCD_HandleTypeDef *hpcd);
+
+HAL_StatusTypeDef HAL_PCD_RegisterLpmCallback(PCD_HandleTypeDef *hpcd, pPCD_LpmCallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_PCD_UnRegisterLpmCallback(PCD_HandleTypeDef *hpcd);
+#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
+/**
+ * @}
+ */
+
+/* I/O operation functions ***************************************************/
+/* Non-Blocking mode: Interrupt */
+/** @addtogroup PCD_Exported_Functions_Group2 Input and Output operation functions
+ * @{
+ */
+HAL_StatusTypeDef HAL_PCD_Start(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_Stop(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd);
+
+void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd);
+
+void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+/**
+ * @}
+ */
+
+/* Peripheral Control functions **********************************************/
+/** @addtogroup PCD_Exported_Functions_Group3 Peripheral Control functions
+ * @{
+ */
+HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address);
+HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint16_t ep_mps, uint8_t ep_type);
+HAL_StatusTypeDef HAL_PCD_EP_Close(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len);
+HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len);
+uint32_t HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_ActivateRemoteWakeup(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_DeActivateRemoteWakeup(PCD_HandleTypeDef *hpcd);
+/**
+ * @}
+ */
+
+/* Peripheral State functions ************************************************/
+/** @addtogroup PCD_Exported_Functions_Group4 Peripheral State functions
+ * @{
+ */
+PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup PCD_Private_Constants PCD Private Constants
+ * @{
+ */
+/** @defgroup USB_EXTI_Line_Interrupt USB EXTI line interrupt
+ * @{
+ */
+
+
+#define USB_WAKEUP_EXTI_LINE (0x1U << 18) /*!< USB FS EXTI Line WakeUp Interrupt */
+
+
+/**
+ * @}
+ */
+
+/** @defgroup PCD_EP0_MPS PCD EP0 MPS
+ * @{
+ */
+#define PCD_EP0MPS_64 DEP0CTL_MPS_64
+#define PCD_EP0MPS_32 DEP0CTL_MPS_32
+#define PCD_EP0MPS_16 DEP0CTL_MPS_16
+#define PCD_EP0MPS_08 DEP0CTL_MPS_8
+/**
+ * @}
+ */
+
+/** @defgroup PCD_ENDP PCD ENDP
+ * @{
+ */
+#define PCD_ENDP0 0U
+#define PCD_ENDP1 1U
+#define PCD_ENDP2 2U
+#define PCD_ENDP3 3U
+#define PCD_ENDP4 4U
+#define PCD_ENDP5 5U
+#define PCD_ENDP6 6U
+#define PCD_ENDP7 7U
+/**
+ * @}
+ */
+
+/** @defgroup PCD_ENDP_Kind PCD Endpoint Kind
+ * @{
+ */
+#define PCD_SNG_BUF 0U
+#define PCD_DBL_BUF 1U
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup PCD_Private_Macros PCD Private Macros
+ * @{
+ */
+
+/******************** Bit definition for USB_COUNTn_RX register *************/
+#define USB_CNTRX_NBLK_MSK (0x1FU << 10)
+#define USB_CNTRX_BLSIZE (0x1U << 15)
+
+/* SetENDPOINT */
+#define PCD_SET_ENDPOINT(USBx, bEpNum, wRegValue) (*(__IO uint16_t *)(&(USBx)->EP0R + ((bEpNum) * 2U)) = (uint16_t)(wRegValue))
+
+/* GetENDPOINT */
+#define PCD_GET_ENDPOINT(USBx, bEpNum) (*(__IO uint16_t *)(&(USBx)->EP0R + ((bEpNum) * 2U)))
+
+/* ENDPOINT transfer */
+#define USB_EP0StartXfer USB_EPStartXfer
+
+/**
+ * @brief sets the type in the endpoint register(bits EP_TYPE[1:0])
+ * @param USBx USB peripheral instance register address.
+ * @param bEpNum Endpoint Number.
+ * @param wType Endpoint Type.
+ * @retval None
+ */
+#define PCD_SET_EPTYPE(USBx, bEpNum, wType) (PCD_SET_ENDPOINT((USBx), (bEpNum), \
+ ((PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EP_T_MASK) | (wType) | USB_EP_CTR_TX | USB_EP_CTR_RX)))
+
+/**
+ * @brief gets the type in the endpoint register(bits EP_TYPE[1:0])
+ * @param USBx USB peripheral instance register address.
+ * @param bEpNum Endpoint Number.
+ * @retval Endpoint Type
+ */
+#define PCD_GET_EPTYPE(USBx, bEpNum) (PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EP_T_FIELD)
+
+/**
+ * @brief free buffer used from the application realizing it to the line
+ * toggles bit SW_BUF in the double buffered endpoint register
+ * @param USBx USB device.
+ * @param bEpNum, bDir
+ * @retval None
+ */
+#define PCD_FreeUserBuffer(USBx, bEpNum, bDir) do { \
+ if ((bDir) == 0U) \
+ { \
+ /* OUT double buffered endpoint */ \
+ PCD_TX_DTOG((USBx), (bEpNum)); \
+ } \
+ else if ((bDir) == 1U) \
+ { \
+ /* IN double buffered endpoint */ \
+ PCD_RX_DTOG((USBx), (bEpNum)); \
+ } \
+} while(0)
+
+/**
+ * @brief sets the status for tx transfer (bits STAT_TX[1:0]).
+ * @param USBx USB peripheral instance register address.
+ * @param bEpNum Endpoint Number.
+ * @param wState new state
+ * @retval None
+ */
+#define PCD_SET_EP_TX_STATUS(USBx, bEpNum, wState) do { \
+ register uint16_t _wRegVal; \
+ \
+ _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPTX_DTOGMASK; \
+ /* toggle first bit ? */ \
+ if ((USB_EPTX_DTOG1 & (wState))!= 0U) \
+ { \
+ _wRegVal ^= USB_EPTX_DTOG1; \
+ } \
+ /* toggle second bit ? */ \
+ if ((USB_EPTX_DTOG2 & (wState))!= 0U) \
+ { \
+ _wRegVal ^= USB_EPTX_DTOG2; \
+ } \
+ PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_RX | USB_EP_CTR_TX)); \
+ } while(0) /* PCD_SET_EP_TX_STATUS */
+
+/**
+ * @brief sets the status for rx transfer (bits STAT_TX[1:0])
+ * @param USBx USB peripheral instance register address.
+ * @param bEpNum Endpoint Number.
+ * @param wState new state
+ * @retval None
+ */
+#define PCD_SET_EP_RX_STATUS(USBx, bEpNum,wState) do { \
+ register uint16_t _wRegVal; \
+ \
+ _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPRX_DTOGMASK; \
+ /* toggle first bit ? */ \
+ if ((USB_EPRX_DTOG1 & (wState))!= 0U) \
+ { \
+ _wRegVal ^= USB_EPRX_DTOG1; \
+ } \
+ /* toggle second bit ? */ \
+ if ((USB_EPRX_DTOG2 & (wState))!= 0U) \
+ { \
+ _wRegVal ^= USB_EPRX_DTOG2; \
+ } \
+ PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_RX | USB_EP_CTR_TX)); \
+ } while(0) /* PCD_SET_EP_RX_STATUS */
+
+/**
+ * @brief sets the status for rx & tx (bits STAT_TX[1:0] & STAT_RX[1:0])
+ * @param USBx USB peripheral instance register address.
+ * @param bEpNum Endpoint Number.
+ * @param wStaterx new state.
+ * @param wStatetx new state.
+ * @retval None
+ */
+#define PCD_SET_EP_TXRX_STATUS(USBx, bEpNum, wStaterx, wStatetx) do { \
+ register uint16_t _wRegVal; \
+ \
+ _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & (USB_EPRX_DTOGMASK | USB_EPTX_STAT); \
+ /* toggle first bit ? */ \
+ if ((USB_EPRX_DTOG1 & (wStaterx))!= 0U) \
+ { \
+ _wRegVal ^= USB_EPRX_DTOG1; \
+ } \
+ /* toggle second bit ? */ \
+ if ((USB_EPRX_DTOG2 & (wStaterx))!= 0U) \
+ { \
+ _wRegVal ^= USB_EPRX_DTOG2; \
+ } \
+ /* toggle first bit ? */ \
+ if ((USB_EPTX_DTOG1 & (wStatetx))!= 0U) \
+ { \
+ _wRegVal ^= USB_EPTX_DTOG1; \
+ } \
+ /* toggle second bit ? */ \
+ if ((USB_EPTX_DTOG2 & (wStatetx))!= 0U) \
+ { \
+ _wRegVal ^= USB_EPTX_DTOG2; \
+ } \
+ \
+ PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_RX | USB_EP_CTR_TX)); \
+ } while(0) /* PCD_SET_EP_TXRX_STATUS */
+
+/**
+ * @brief gets the status for tx/rx transfer (bits STAT_TX[1:0]
+ * /STAT_RX[1:0])
+ * @param USBx USB peripheral instance register address.
+ * @param bEpNum Endpoint Number.
+ * @retval status
+ */
+#define PCD_GET_EP_TX_STATUS(USBx, bEpNum) ((uint16_t)PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPTX_STAT)
+#define PCD_GET_EP_RX_STATUS(USBx, bEpNum) ((uint16_t)PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPRX_STAT)
+
+/**
+ * @brief sets directly the VALID tx/rx-status into the endpoint register
+ * @param USBx USB peripheral instance register address.
+ * @param bEpNum Endpoint Number.
+ * @retval None
+ */
+#define PCD_SET_EP_TX_VALID(USBx, bEpNum) (PCD_SET_EP_TX_STATUS((USBx), (bEpNum), USB_EP_TX_VALID))
+#define PCD_SET_EP_RX_VALID(USBx, bEpNum) (PCD_SET_EP_RX_STATUS((USBx), (bEpNum), USB_EP_RX_VALID))
+
+/**
+ * @brief checks stall condition in an endpoint.
+ * @param USBx USB peripheral instance register address.
+ * @param bEpNum Endpoint Number.
+ * @retval TRUE = endpoint in stall condition.
+ */
+#define PCD_GET_EP_TX_STALL_STATUS(USBx, bEpNum) (PCD_GET_EP_TX_STATUS((USBx), (bEpNum)) \
+ == USB_EP_TX_STALL)
+#define PCD_GET_EP_RX_STALL_STATUS(USBx, bEpNum) (PCD_GET_EP_RX_STATUS((USBx), (bEpNum)) \
+ == USB_EP_RX_STALL)
+
+/**
+ * @brief set & clear EP_KIND bit.
+ * @param USBx USB peripheral instance register address.
+ * @param bEpNum Endpoint Number.
+ * @retval None
+ */
+#define PCD_SET_EP_KIND(USBx, bEpNum) do { \
+ register uint16_t _wRegVal; \
+ \
+ _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPREG_MASK; \
+ \
+ PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_RX | USB_EP_CTR_TX | USB_EP_KIND)); \
+ } while(0) /* PCD_SET_EP_KIND */
+
+#define PCD_CLEAR_EP_KIND(USBx, bEpNum) do { \
+ register uint16_t _wRegVal; \
+ \
+ _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPKIND_MASK; \
+ \
+ PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_RX | USB_EP_CTR_TX)); \
+ } while(0) /* PCD_CLEAR_EP_KIND */
+
+/**
+ * @brief Sets/clears directly STATUS_OUT bit in the endpoint register.
+ * @param USBx USB peripheral instance register address.
+ * @param bEpNum Endpoint Number.
+ * @retval None
+ */
+#define PCD_SET_OUT_STATUS(USBx, bEpNum) PCD_SET_EP_KIND((USBx), (bEpNum))
+#define PCD_CLEAR_OUT_STATUS(USBx, bEpNum) PCD_CLEAR_EP_KIND((USBx), (bEpNum))
+
+/**
+ * @brief Sets/clears directly EP_KIND bit in the endpoint register.
+ * @param USBx USB peripheral instance register address.
+ * @param bEpNum Endpoint Number.
+ * @retval None
+ */
+#define PCD_SET_EP_DBUF(USBx, bEpNum) PCD_SET_EP_KIND((USBx), (bEpNum))
+#define PCD_CLEAR_EP_DBUF(USBx, bEpNum) PCD_CLEAR_EP_KIND((USBx), (bEpNum))
+
+/**
+ * @brief Clears bit CTR_RX / CTR_TX in the endpoint register.
+ * @param USBx USB peripheral instance register address.
+ * @param bEpNum Endpoint Number.
+ * @retval None
+ */
+#define PCD_CLEAR_RX_EP_CTR(USBx, bEpNum) do { \
+ register uint16_t _wRegVal; \
+ \
+ _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & (0x7FFFU & USB_EPREG_MASK); \
+ \
+ PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_TX)); \
+ } while(0) /* PCD_CLEAR_RX_EP_CTR */
+
+#define PCD_CLEAR_TX_EP_CTR(USBx, bEpNum) do { \
+ register uint16_t _wRegVal; \
+ \
+ _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & (0xFF7FU & USB_EPREG_MASK); \
+ \
+ PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_RX)); \
+ } while(0) /* PCD_CLEAR_TX_EP_CTR */
+
+/**
+ * @brief Toggles DTOG_RX / DTOG_TX bit in the endpoint register.
+ * @param USBx USB peripheral instance register address.
+ * @param bEpNum Endpoint Number.
+ * @retval None
+ */
+#define PCD_RX_DTOG(USBx, bEpNum) do { \
+ register uint16_t _wEPVal; \
+ \
+ _wEPVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPREG_MASK; \
+ \
+ PCD_SET_ENDPOINT((USBx), (bEpNum), (_wEPVal | USB_EP_CTR_RX | USB_EP_CTR_TX | USB_EP_DTOG_RX)); \
+ } while(0) /* PCD_RX_DTOG */
+
+#define PCD_TX_DTOG(USBx, bEpNum) do { \
+ register uint16_t _wEPVal; \
+ \
+ _wEPVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPREG_MASK; \
+ \
+ PCD_SET_ENDPOINT((USBx), (bEpNum), (_wEPVal | USB_EP_CTR_RX | USB_EP_CTR_TX | USB_EP_DTOG_TX)); \
+ } while(0) /* PCD_TX_DTOG */
+/**
+ * @brief Clears DTOG_RX / DTOG_TX bit in the endpoint register.
+ * @param USBx USB peripheral instance register address.
+ * @param bEpNum Endpoint Number.
+ * @retval None
+ */
+#define PCD_CLEAR_RX_DTOG(USBx, bEpNum) do { \
+ register uint16_t _wRegVal; \
+ \
+ _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)); \
+ \
+ if ((_wRegVal & USB_EP_DTOG_RX) != 0U)\
+ { \
+ PCD_RX_DTOG((USBx), (bEpNum)); \
+ } \
+ } while(0) /* PCD_CLEAR_RX_DTOG */
+
+#define PCD_CLEAR_TX_DTOG(USBx, bEpNum) do { \
+ register uint16_t _wRegVal; \
+ \
+ _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)); \
+ \
+ if ((_wRegVal & USB_EP_DTOG_TX) != 0U)\
+ { \
+ PCD_TX_DTOG((USBx), (bEpNum)); \
+ } \
+ } while(0) /* PCD_CLEAR_TX_DTOG */
+
+/**
+ * @brief Sets address in an endpoint register.
+ * @param USBx USB peripheral instance register address.
+ * @param bEpNum Endpoint Number.
+ * @param bAddr Address.
+ * @retval None
+ */
+#define PCD_SET_EP_ADDRESS(USBx, bEpNum, bAddr) do { \
+ register uint16_t _wRegVal; \
+ \
+ _wRegVal = (PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPREG_MASK) | (bAddr); \
+ \
+ PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_RX | USB_EP_CTR_TX)); \
+ } while(0) /* PCD_SET_EP_ADDRESS */
+
+/**
+ * @brief Gets address in an endpoint register.
+ * @param USBx USB peripheral instance register address.
+ * @param bEpNum Endpoint Number.
+ * @retval None
+ */
+#define PCD_GET_EP_ADDRESS(USBx, bEpNum) ((uint8_t)(PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPADDR_FIELD))
+
+#define PCD_EP_TX_CNT(USBx, bEpNum) ((uint16_t *)((((uint32_t)(USBx)->BTABLE + ((uint32_t)(bEpNum) * 8U) + 2U) * PMA_ACCESS) + ((uint32_t)(USBx) + 0x400U)))
+#define PCD_EP_RX_CNT(USBx, bEpNum) ((uint16_t *)((((uint32_t)(USBx)->BTABLE + ((uint32_t)(bEpNum) * 8U) + 6U) * PMA_ACCESS) + ((uint32_t)(USBx) + 0x400U)))
+
+/**
+ * @brief sets address of the tx/rx buffer.
+ * @param USBx USB peripheral instance register address.
+ * @param bEpNum Endpoint Number.
+ * @param wAddr address to be set (must be word aligned).
+ * @retval None
+ */
+#define PCD_SET_EP_TX_ADDRESS(USBx, bEpNum, wAddr) do { \
+ register uint16_t *_wRegVal; \
+ register uint32_t _wRegBase = (uint32_t)USBx; \
+ \
+ _wRegBase += (uint32_t)(USBx)->BTABLE; \
+ _wRegVal = (uint16_t *)(_wRegBase + 0x400U + (((uint32_t)(bEpNum) * 8U) * PMA_ACCESS)); \
+ *_wRegVal = ((wAddr) >> 1) << 1; \
+} while(0) /* PCD_SET_EP_TX_ADDRESS */
+
+#define PCD_SET_EP_RX_ADDRESS(USBx, bEpNum, wAddr) do { \
+ register uint16_t *_wRegVal; \
+ register uint32_t _wRegBase = (uint32_t)USBx; \
+ \
+ _wRegBase += (uint32_t)(USBx)->BTABLE; \
+ _wRegVal = (uint16_t *)(_wRegBase + 0x400U + ((((uint32_t)(bEpNum) * 8U) + 4U) * PMA_ACCESS)); \
+ *_wRegVal = ((wAddr) >> 1) << 1; \
+} while(0) /* PCD_SET_EP_RX_ADDRESS */
+
+/**
+ * @brief Gets address of the tx/rx buffer.
+ * @param USBx USB peripheral instance register address.
+ * @param bEpNum Endpoint Number.
+ * @retval address of the buffer.
+ */
+#define PCD_GET_EP_TX_ADDRESS(USBx, bEpNum) ((uint16_t)*PCD_EP_TX_ADDRESS((USBx), (bEpNum)))
+#define PCD_GET_EP_RX_ADDRESS(USBx, bEpNum) ((uint16_t)*PCD_EP_RX_ADDRESS((USBx), (bEpNum)))
+
+/**
+ * @brief Sets counter of rx buffer with no. of blocks.
+ * @param pdwReg Register pointer
+ * @param wCount Counter.
+ * @param wNBlocks no. of Blocks.
+ * @retval None
+ */
+#define PCD_CALC_BLK32(pdwReg, wCount, wNBlocks) do { \
+ (wNBlocks) = (wCount) >> 5; \
+ if (((wCount) & 0x1fU) == 0U) \
+ { \
+ (wNBlocks)--; \
+ } \
+ *(pdwReg) = (uint16_t)(((wNBlocks) << 10) | USB_CNTRX_BLSIZE); \
+ } while(0) /* PCD_CALC_BLK32 */
+
+#define PCD_CALC_BLK2(pdwReg, wCount, wNBlocks) do { \
+ (wNBlocks) = (wCount) >> 1; \
+ if (((wCount) & 0x1U) != 0U) \
+ { \
+ (wNBlocks)++; \
+ } \
+ *(pdwReg) = (uint16_t)((wNBlocks) << 10); \
+ } while(0) /* PCD_CALC_BLK2 */
+
+#define PCD_SET_EP_CNT_RX_REG(pdwReg, wCount) do { \
+ uint32_t wNBlocks; \
+ if ((wCount) == 0U) \
+ { \
+ *(pdwReg) &= (uint16_t)~USB_CNTRX_NBLK_MSK; \
+ *(pdwReg) |= USB_CNTRX_BLSIZE; \
+ } \
+ else if((wCount) <= 62U) \
+ { \
+ PCD_CALC_BLK2((pdwReg), (wCount), wNBlocks); \
+ } \
+ else \
+ { \
+ PCD_CALC_BLK32((pdwReg),(wCount), wNBlocks); \
+ } \
+ } while(0) /* PCD_SET_EP_CNT_RX_REG */
+
+#define PCD_SET_EP_RX_DBUF0_CNT(USBx, bEpNum, wCount) do { \
+ register uint32_t _wRegBase = (uint32_t)(USBx); \
+ uint16_t *pdwReg; \
+ \
+ _wRegBase += (uint32_t)(USBx)->BTABLE; \
+ pdwReg = (uint16_t *)(_wRegBase + 0x400U + ((((uint32_t)(bEpNum) * 8U) + 2U) * PMA_ACCESS)); \
+ PCD_SET_EP_CNT_RX_REG(pdwReg, (wCount)); \
+ } while(0)
+
+/**
+ * @brief sets counter for the tx/rx buffer.
+ * @param USBx USB peripheral instance register address.
+ * @param bEpNum Endpoint Number.
+ * @param wCount Counter value.
+ * @retval None
+ */
+#define PCD_SET_EP_TX_CNT(USBx, bEpNum, wCount) do { \
+ register uint32_t _wRegBase = (uint32_t)(USBx); \
+ uint16_t *_wRegVal; \
+ \
+ _wRegBase += (uint32_t)(USBx)->BTABLE; \
+ _wRegVal = (uint16_t *)(_wRegBase + 0x400U + ((((uint32_t)(bEpNum) * 8U) + 2U) * PMA_ACCESS)); \
+ *_wRegVal = (uint16_t)(wCount); \
+} while(0)
+
+#define PCD_SET_EP_RX_CNT(USBx, bEpNum, wCount) do { \
+ register uint32_t _wRegBase = (uint32_t)(USBx); \
+ uint16_t *_wRegVal; \
+ \
+ _wRegBase += (uint32_t)(USBx)->BTABLE; \
+ _wRegVal = (uint16_t *)(_wRegBase + 0x400U + ((((uint32_t)(bEpNum) * 8U) + 6U) * PMA_ACCESS)); \
+ PCD_SET_EP_CNT_RX_REG(_wRegVal, (wCount)); \
+} while(0)
+
+/**
+ * @brief gets counter of the tx buffer.
+ * @param USBx USB peripheral instance register address.
+ * @param bEpNum Endpoint Number.
+ * @retval Counter value
+ */
+#define PCD_GET_EP_TX_CNT(USBx, bEpNum) ((uint32_t)(*PCD_EP_TX_CNT((USBx), (bEpNum))) & 0x3ffU)
+#define PCD_GET_EP_RX_CNT(USBx, bEpNum) ((uint32_t)(*PCD_EP_RX_CNT((USBx), (bEpNum))) & 0x3ffU)
+
+/**
+ * @brief Sets buffer 0/1 address in a double buffer endpoint.
+ * @param USBx USB peripheral instance register address.
+ * @param bEpNum Endpoint Number.
+ * @param wBuf0Addr buffer 0 address.
+ * @retval Counter value
+ */
+#define PCD_SET_EP_DBUF0_ADDR(USBx, bEpNum, wBuf0Addr) do { \
+ PCD_SET_EP_TX_ADDRESS((USBx), (bEpNum), (wBuf0Addr)); \
+ } while(0) /* PCD_SET_EP_DBUF0_ADDR */
+#define PCD_SET_EP_DBUF1_ADDR(USBx, bEpNum, wBuf1Addr) do { \
+ PCD_SET_EP_RX_ADDRESS((USBx), (bEpNum), (wBuf1Addr)); \
+ } while(0) /* PCD_SET_EP_DBUF1_ADDR */
+
+/**
+ * @brief Sets addresses in a double buffer endpoint.
+ * @param USBx USB peripheral instance register address.
+ * @param bEpNum Endpoint Number.
+ * @param wBuf0Addr: buffer 0 address.
+ * @param wBuf1Addr = buffer 1 address.
+ * @retval None
+ */
+#define PCD_SET_EP_DBUF_ADDR(USBx, bEpNum, wBuf0Addr, wBuf1Addr) do { \
+ PCD_SET_EP_DBUF0_ADDR((USBx), (bEpNum), (wBuf0Addr)); \
+ PCD_SET_EP_DBUF1_ADDR((USBx), (bEpNum), (wBuf1Addr)); \
+ } while(0) /* PCD_SET_EP_DBUF_ADDR */
+
+/**
+ * @brief Gets buffer 0/1 address of a double buffer endpoint.
+ * @param USBx USB peripheral instance register address.
+ * @param bEpNum Endpoint Number.
+ * @retval None
+ */
+#define PCD_GET_EP_DBUF0_ADDR(USBx, bEpNum) (PCD_GET_EP_TX_ADDRESS((USBx), (bEpNum)))
+#define PCD_GET_EP_DBUF1_ADDR(USBx, bEpNum) (PCD_GET_EP_RX_ADDRESS((USBx), (bEpNum)))
+
+/**
+ * @brief Gets buffer 0/1 address of a double buffer endpoint.
+ * @param USBx USB peripheral instance register address.
+ * @param bEpNum Endpoint Number.
+ * @param bDir endpoint dir EP_DBUF_OUT = OUT
+ * EP_DBUF_IN = IN
+ * @param wCount: Counter value
+ * @retval None
+ */
+#define PCD_SET_EP_DBUF0_CNT(USBx, bEpNum, bDir, wCount) do { \
+ if ((bDir) == 0U) \
+ /* OUT endpoint */ \
+ { \
+ PCD_SET_EP_RX_DBUF0_CNT((USBx), (bEpNum), (wCount)); \
+ } \
+ else \
+ { \
+ if ((bDir) == 1U) \
+ { \
+ /* IN endpoint */ \
+ PCD_SET_EP_TX_CNT((USBx), (bEpNum), (wCount)); \
+ } \
+ } \
+ } while(0) /* SetEPDblBuf0Count*/
+
+#define PCD_SET_EP_DBUF1_CNT(USBx, bEpNum, bDir, wCount) do { \
+ register uint32_t _wBase = (uint32_t)(USBx); \
+ uint16_t *_wEPRegVal; \
+ \
+ if ((bDir) == 0U) \
+ { \
+ /* OUT endpoint */ \
+ PCD_SET_EP_RX_CNT((USBx), (bEpNum), (wCount)); \
+ } \
+ else \
+ { \
+ if ((bDir) == 1U) \
+ { \
+ /* IN endpoint */ \
+ _wBase += (uint32_t)(USBx)->BTABLE; \
+ _wEPRegVal = (uint16_t *)(_wBase + 0x400U + ((((uint32_t)(bEpNum) * 8U) + 6U) * PMA_ACCESS)); \
+ *_wEPRegVal = (uint16_t)(wCount); \
+ } \
+ } \
+ } while(0) /* SetEPDblBuf1Count */
+
+#define PCD_SET_EP_DBUF_CNT(USBx, bEpNum, bDir, wCount) do { \
+ PCD_SET_EP_DBUF0_CNT((USBx), (bEpNum), (bDir), (wCount)); \
+ PCD_SET_EP_DBUF1_CNT((USBx), (bEpNum), (bDir), (wCount)); \
+ } while(0) /* PCD_SET_EP_DBUF_CNT */
+
+/**
+ * @brief Gets buffer 0/1 rx/tx counter for double buffering.
+ * @param USBx USB peripheral instance register address.
+ * @param bEpNum Endpoint Number.
+ * @retval None
+ */
+#define PCD_GET_EP_DBUF0_CNT(USBx, bEpNum) (PCD_GET_EP_TX_CNT((USBx), (bEpNum)))
+#define PCD_GET_EP_DBUF1_CNT(USBx, bEpNum) (PCD_GET_EP_RX_CNT((USBx), (bEpNum)))
+
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* defined (USB) */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32F0xx_HAL_PCD_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pcd_ex.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pcd_ex.h
new file mode 100644
index 0000000..af65766
--- /dev/null
+++ b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pcd_ex.h
@@ -0,0 +1,93 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_pcd_ex.h
+ * @author MCD Application Team
+ * @brief Header file of PCD HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32F0xx_HAL_PCD_EX_H
+#define STM32F0xx_HAL_PCD_EX_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+#if defined (USB)
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup PCDEx
+ * @{
+ */
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported macros -----------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup PCDEx_Exported_Functions PCDEx Exported Functions
+ * @{
+ */
+/** @addtogroup PCDEx_Exported_Functions_Group1 Peripheral Control functions
+ * @{
+ */
+
+
+
+HAL_StatusTypeDef HAL_PCDEx_PMAConfig(PCD_HandleTypeDef *hpcd,
+ uint16_t ep_addr,
+ uint16_t ep_kind,
+ uint32_t pmaadress);
+
+
+HAL_StatusTypeDef HAL_PCDEx_ActivateLPM(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCDEx_DeActivateLPM(PCD_HandleTypeDef *hpcd);
+
+
+HAL_StatusTypeDef HAL_PCDEx_ActivateBCD(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCDEx_DeActivateBCD(PCD_HandleTypeDef *hpcd);
+void HAL_PCDEx_BCD_VBUSDetect(PCD_HandleTypeDef *hpcd);
+
+void HAL_PCDEx_LPM_Callback(PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg);
+void HAL_PCDEx_BCD_Callback(PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* defined (USB) */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* STM32F0xx_HAL_PCD_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h
new file mode 100644
index 0000000..e716606
--- /dev/null
+++ b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h
@@ -0,0 +1,189 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_pwr.h
+ * @author MCD Application Team
+ * @brief Header file of PWR HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_PWR_H
+#define __STM32F0xx_HAL_PWR_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup PWR PWR
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup PWR_Exported_Constants PWR Exported Constants
+ * @{
+ */
+
+/** @defgroup PWR_Regulator_state_in_STOP_mode PWR Regulator state in STOP mode
+ * @{
+ */
+#define PWR_MAINREGULATOR_ON (0x00000000U)
+#define PWR_LOWPOWERREGULATOR_ON PWR_CR_LPDS
+
+#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_ON) || \
+ ((REGULATOR) == PWR_LOWPOWERREGULATOR_ON))
+/**
+ * @}
+ */
+
+/** @defgroup PWR_SLEEP_mode_entry PWR SLEEP mode entry
+ * @{
+ */
+#define PWR_SLEEPENTRY_WFI ((uint8_t)0x01U)
+#define PWR_SLEEPENTRY_WFE ((uint8_t)0x02U)
+#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPENTRY_WFI) || ((ENTRY) == PWR_SLEEPENTRY_WFE))
+/**
+ * @}
+ */
+
+/** @defgroup PWR_STOP_mode_entry PWR STOP mode entry
+ * @{
+ */
+#define PWR_STOPENTRY_WFI ((uint8_t)0x01U)
+#define PWR_STOPENTRY_WFE ((uint8_t)0x02U)
+#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPENTRY_WFI) || ((ENTRY) == PWR_STOPENTRY_WFE))
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup PWR_Exported_Macro PWR Exported Macro
+ * @{
+ */
+
+/** @brief Check PWR flag is set or not.
+ * @param __FLAG__ specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg PWR_FLAG_WU: Wake Up flag. This flag indicates that a wakeup event
+ * was received from the WKUP pin or from the RTC alarm (Alarm A),
+ * RTC Tamper event, RTC TimeStamp event or RTC Wakeup.
+ * An additional wakeup event is detected if the WKUP pin is enabled
+ * (by setting the EWUP bit) when the WKUP pin level is already high.
+ * @arg PWR_FLAG_SB: StandBy flag. This flag indicates that the system was
+ * resumed from StandBy mode.
+ * @arg PWR_FLAG_PVDO: PVD Output. This flag is valid only if PVD is enabled
+ * by the HAL_PWR_EnablePVD() function. The PVD is stopped by Standby mode
+ * For this reason, this bit is equal to 0 after Standby or reset
+ * until the PVDE bit is set.
+ * Warning: this Flag is not available on STM32F030x8 products
+ * @arg PWR_FLAG_VREFINTRDY: This flag indicates that the internal reference
+ * voltage VREFINT is ready.
+ * Warning: this Flag is not available on STM32F030x8 products
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_PWR_GET_FLAG(__FLAG__) ((PWR->CSR & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clear the PWR's pending flags.
+ * @param __FLAG__ specifies the flag to clear.
+ * This parameter can be one of the following values:
+ * @arg PWR_FLAG_WU: Wake Up flag
+ * @arg PWR_FLAG_SB: StandBy flag
+ */
+#define __HAL_PWR_CLEAR_FLAG(__FLAG__) (PWR->CR |= (__FLAG__) << 2U)
+
+
+/**
+ * @}
+ */
+
+/* Include PWR HAL Extension module */
+#include "stm32f0xx_hal_pwr_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup PWR_Exported_Functions PWR Exported Functions
+ * @{
+ */
+
+/** @addtogroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+
+/* Initialization and de-initialization functions *****************************/
+void HAL_PWR_DeInit(void);
+
+/**
+ * @}
+ */
+
+/** @addtogroup PWR_Exported_Functions_Group2 Peripheral Control functions
+ * @{
+ */
+
+/* Peripheral Control functions **********************************************/
+void HAL_PWR_EnableBkUpAccess(void);
+void HAL_PWR_DisableBkUpAccess(void);
+
+/* WakeUp pins configuration functions ****************************************/
+void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinx);
+void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx);
+
+/* Low Power modes configuration functions ************************************/
+void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry);
+void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry);
+void HAL_PWR_EnterSTANDBYMode(void);
+
+void HAL_PWR_EnableSleepOnExit(void);
+void HAL_PWR_DisableSleepOnExit(void);
+void HAL_PWR_EnableSEVOnPend(void);
+void HAL_PWR_DisableSEVOnPend(void);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F0xx_HAL_PWR_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h
new file mode 100644
index 0000000..a9ed6eb
--- /dev/null
+++ b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr_ex.h
@@ -0,0 +1,459 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_pwr_ex.h
+ * @author MCD Application Team
+ * @brief Header file of PWR HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_PWR_EX_H
+#define __STM32F0xx_HAL_PWR_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup PWREx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup PWREx_Exported_Types PWREx Exported Types
+ * @{
+ */
+
+#if defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || \
+ defined (STM32F091xC)
+
+/**
+ * @brief PWR PVD configuration structure definition
+ */
+typedef struct
+{
+ uint32_t PVDLevel; /*!< PVDLevel: Specifies the PVD detection level
+ This parameter can be a value of @ref PWREx_PVD_detection_level */
+
+ uint32_t Mode; /*!< Mode: Specifies the operating mode for the selected pins.
+ This parameter can be a value of @ref PWREx_PVD_Mode */
+}PWR_PVDTypeDef;
+
+#endif /* defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || */
+ /* defined (STM32F071xB) || defined (STM32F072xB) || */
+ /* defined (STM32F091xC) */
+/**
+ * @}
+ */
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup PWREx_Exported_Constants PWREx Exported Constants
+ * @{
+ */
+
+
+/** @defgroup PWREx_WakeUp_Pins PWREx Wakeup Pins
+ * @{
+ */
+#if defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
+ defined (STM32F091xC) || defined (STM32F098xx)
+#define PWR_WAKEUP_PIN1 ((uint32_t)PWR_CSR_EWUP1)
+#define PWR_WAKEUP_PIN2 ((uint32_t)PWR_CSR_EWUP2)
+#define PWR_WAKEUP_PIN3 ((uint32_t)PWR_CSR_EWUP3)
+#define PWR_WAKEUP_PIN4 ((uint32_t)PWR_CSR_EWUP4)
+#define PWR_WAKEUP_PIN5 ((uint32_t)PWR_CSR_EWUP5)
+#define PWR_WAKEUP_PIN6 ((uint32_t)PWR_CSR_EWUP6)
+#define PWR_WAKEUP_PIN7 ((uint32_t)PWR_CSR_EWUP7)
+#define PWR_WAKEUP_PIN8 ((uint32_t)PWR_CSR_EWUP8)
+
+#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) || \
+ ((PIN) == PWR_WAKEUP_PIN2) || \
+ ((PIN) == PWR_WAKEUP_PIN3) || \
+ ((PIN) == PWR_WAKEUP_PIN4) || \
+ ((PIN) == PWR_WAKEUP_PIN5) || \
+ ((PIN) == PWR_WAKEUP_PIN6) || \
+ ((PIN) == PWR_WAKEUP_PIN7) || \
+ ((PIN) == PWR_WAKEUP_PIN8))
+
+#elif defined(STM32F030xC) || defined (STM32F070xB)
+#define PWR_WAKEUP_PIN1 ((uint32_t)PWR_CSR_EWUP1)
+#define PWR_WAKEUP_PIN2 ((uint32_t)PWR_CSR_EWUP2)
+#define PWR_WAKEUP_PIN4 ((uint32_t)PWR_CSR_EWUP4)
+#define PWR_WAKEUP_PIN5 ((uint32_t)PWR_CSR_EWUP5)
+#define PWR_WAKEUP_PIN6 ((uint32_t)PWR_CSR_EWUP6)
+#define PWR_WAKEUP_PIN7 ((uint32_t)PWR_CSR_EWUP7)
+
+#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) || \
+ ((PIN) == PWR_WAKEUP_PIN2) || \
+ ((PIN) == PWR_WAKEUP_PIN4) || \
+ ((PIN) == PWR_WAKEUP_PIN5) || \
+ ((PIN) == PWR_WAKEUP_PIN6) || \
+ ((PIN) == PWR_WAKEUP_PIN7))
+
+#elif defined(STM32F042x6) || defined (STM32F048xx)
+#define PWR_WAKEUP_PIN1 ((uint32_t)PWR_CSR_EWUP1)
+#define PWR_WAKEUP_PIN2 ((uint32_t)PWR_CSR_EWUP2)
+#define PWR_WAKEUP_PIN4 ((uint32_t)PWR_CSR_EWUP4)
+#define PWR_WAKEUP_PIN6 ((uint32_t)PWR_CSR_EWUP6)
+#define PWR_WAKEUP_PIN7 ((uint32_t)PWR_CSR_EWUP7)
+
+#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) || \
+ ((PIN) == PWR_WAKEUP_PIN2) || \
+ ((PIN) == PWR_WAKEUP_PIN4) || \
+ ((PIN) == PWR_WAKEUP_PIN6) || \
+ ((PIN) == PWR_WAKEUP_PIN7))
+
+#else
+#define PWR_WAKEUP_PIN1 ((uint32_t)PWR_CSR_EWUP1)
+#define PWR_WAKEUP_PIN2 ((uint32_t)PWR_CSR_EWUP2)
+
+
+#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) || \
+ ((PIN) == PWR_WAKEUP_PIN2))
+
+#endif
+
+/**
+ * @}
+ */
+
+/** @defgroup PWREx_EXTI_Line PWREx EXTI Line
+ * @{
+ */
+#if defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || \
+ defined (STM32F091xC)
+
+#define PWR_EXTI_LINE_PVD ((uint32_t)EXTI_IMR_MR16) /*!< External interrupt line 16 Connected to the PVD EXTI Line */
+
+#endif /* defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || */
+ /* defined (STM32F071xB) || defined (STM32F072xB) || */
+ /* defined (STM32F091xC) */
+
+#if defined (STM32F042x6) || defined (STM32F048xx) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
+ defined (STM32F091xC) || defined (STM32F098xx)
+
+#define PWR_EXTI_LINE_VDDIO2 ((uint32_t)EXTI_IMR_MR31) /*!< External interrupt line 31 Connected to the Vddio2 Monitor EXTI Line */
+
+#endif /* defined (STM32F042x6) || defined (STM32F048xx) ||\
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
+ defined (STM32F091xC) || defined (STM32F098xx) ||*/
+/**
+ * @}
+ */
+
+#if defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || \
+ defined (STM32F091xC)
+/** @defgroup PWREx_PVD_detection_level PWREx PVD detection level
+ * @{
+ */
+#define PWR_PVDLEVEL_0 PWR_CR_PLS_LEV0
+#define PWR_PVDLEVEL_1 PWR_CR_PLS_LEV1
+#define PWR_PVDLEVEL_2 PWR_CR_PLS_LEV2
+#define PWR_PVDLEVEL_3 PWR_CR_PLS_LEV3
+#define PWR_PVDLEVEL_4 PWR_CR_PLS_LEV4
+#define PWR_PVDLEVEL_5 PWR_CR_PLS_LEV5
+#define PWR_PVDLEVEL_6 PWR_CR_PLS_LEV6
+#define PWR_PVDLEVEL_7 PWR_CR_PLS_LEV7
+#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLEVEL_0) || ((LEVEL) == PWR_PVDLEVEL_1)|| \
+ ((LEVEL) == PWR_PVDLEVEL_2) || ((LEVEL) == PWR_PVDLEVEL_3)|| \
+ ((LEVEL) == PWR_PVDLEVEL_4) || ((LEVEL) == PWR_PVDLEVEL_5)|| \
+ ((LEVEL) == PWR_PVDLEVEL_6) || ((LEVEL) == PWR_PVDLEVEL_7))
+/**
+ * @}
+ */
+
+/** @defgroup PWREx_PVD_Mode PWREx PVD Mode
+ * @{
+ */
+#define PWR_PVD_MODE_NORMAL (0x00000000U) /*!< basic mode is used */
+#define PWR_PVD_MODE_IT_RISING (0x00010001U) /*!< External Interrupt Mode with Rising edge trigger detection */
+#define PWR_PVD_MODE_IT_FALLING (0x00010002U) /*!< External Interrupt Mode with Falling edge trigger detection */
+#define PWR_PVD_MODE_IT_RISING_FALLING (0x00010003U) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
+#define PWR_PVD_MODE_EVENT_RISING (0x00020001U) /*!< Event Mode with Rising edge trigger detection */
+#define PWR_PVD_MODE_EVENT_FALLING (0x00020002U) /*!< Event Mode with Falling edge trigger detection */
+#define PWR_PVD_MODE_EVENT_RISING_FALLING (0x00020003U) /*!< Event Mode with Rising/Falling edge trigger detection */
+
+#define IS_PWR_PVD_MODE(MODE) (((MODE) == PWR_PVD_MODE_IT_RISING)|| ((MODE) == PWR_PVD_MODE_IT_FALLING) || \
+ ((MODE) == PWR_PVD_MODE_IT_RISING_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING) || \
+ ((MODE) == PWR_PVD_MODE_EVENT_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING_FALLING) || \
+ ((MODE) == PWR_PVD_MODE_NORMAL))
+/**
+ * @}
+ */
+#endif /* defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || */
+ /* defined (STM32F071xB) || defined (STM32F072xB) || */
+ /* defined (STM32F091xC) */
+
+/** @defgroup PWREx_Flag PWREx Flag
+ * @{
+ */
+#if defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || \
+ defined (STM32F091xC)
+
+#define PWR_FLAG_WU PWR_CSR_WUF
+#define PWR_FLAG_SB PWR_CSR_SBF
+#define PWR_FLAG_PVDO PWR_CSR_PVDO
+#define PWR_FLAG_VREFINTRDY PWR_CSR_VREFINTRDYF
+#elif defined (STM32F070x6) || defined (STM32F070xB) || defined (STM32F030xC)
+#define PWR_FLAG_WU PWR_CSR_WUF
+#define PWR_FLAG_SB PWR_CSR_SBF
+#define PWR_FLAG_VREFINTRDY PWR_CSR_VREFINTRDYF
+#else
+#define PWR_FLAG_WU PWR_CSR_WUF
+#define PWR_FLAG_SB PWR_CSR_SBF
+
+#endif /* defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || */
+ /* defined (STM32F071xB) || defined (STM32F072xB) || */
+ /* defined (STM32F091xC) */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup PWREx_Exported_Macros PWREx Exported Macros
+ * @{
+ */
+#if defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || \
+ defined (STM32F091xC)
+/**
+ * @brief Enable interrupt on PVD Exti Line 16.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_ENABLE_IT() (EXTI->IMR |= (PWR_EXTI_LINE_PVD))
+
+/**
+ * @brief Disable interrupt on PVD Exti Line 16.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_DISABLE_IT() (EXTI->IMR &= ~(PWR_EXTI_LINE_PVD))
+
+/**
+ * @brief Enable event on PVD Exti Line 16.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_ENABLE_EVENT() (EXTI->EMR |= (PWR_EXTI_LINE_PVD))
+
+/**
+ * @brief Disable event on PVD Exti Line 16.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(PWR_EXTI_LINE_PVD))
+
+/**
+ * @brief Disable the PVD Extended Interrupt Rising Trigger.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD)
+
+/**
+ * @brief Disable the PVD Extended Interrupt Falling Trigger.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD)
+
+/**
+ * @brief Disable the PVD Extended Interrupt Rising & Falling Trigger.
+ * @retval None
+ */
+#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_FALLING_EDGE() __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE();
+
+
+/**
+ * @brief PVD EXTI line configuration: set falling edge trigger.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE() EXTI->FTSR |= (PWR_EXTI_LINE_PVD)
+
+/**
+ * @brief PVD EXTI line configuration: set rising edge trigger.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE() EXTI->RTSR |= (PWR_EXTI_LINE_PVD)
+
+/**
+ * @brief Enable the PVD Extended Interrupt Rising & Falling Trigger.
+ * @retval None
+ */
+#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_FALLING_EDGE() __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE();
+
+/**
+ * @brief Check whether the specified PVD EXTI interrupt flag is set or not.
+ * @retval EXTI PVD Line Status.
+ */
+#define __HAL_PWR_PVD_EXTI_GET_FLAG() (EXTI->PR & (PWR_EXTI_LINE_PVD))
+
+/**
+ * @brief Clear the PVD EXTI flag.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_CLEAR_FLAG() (EXTI->PR = (PWR_EXTI_LINE_PVD))
+
+/**
+ * @brief Generate a Software interrupt on selected EXTI line.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_GENERATE_SWIT() (EXTI->SWIER |= (PWR_EXTI_LINE_PVD))
+
+#endif /* defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || */
+ /* defined (STM32F071xB) || defined (STM32F072xB) || */
+ /* defined (STM32F091xC) */
+
+
+#if defined (STM32F042x6) || defined (STM32F048xx) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
+ defined (STM32F091xC) || defined (STM32F098xx)
+/**
+ * @brief Enable interrupt on Vddio2 Monitor Exti Line 31.
+ * @retval None.
+ */
+#define __HAL_PWR_VDDIO2_EXTI_ENABLE_IT() (EXTI->IMR |= (PWR_EXTI_LINE_VDDIO2))
+
+/**
+ * @brief Disable interrupt on Vddio2 Monitor Exti Line 31.
+ * @retval None.
+ */
+#define __HAL_PWR_VDDIO2_EXTI_DISABLE_IT() (EXTI->IMR &= ~(PWR_EXTI_LINE_VDDIO2))
+
+/**
+ * @brief Vddio2 Monitor EXTI line configuration: clear falling edge and rising edge trigger.
+ * @retval None.
+ */
+#define __HAL_PWR_VDDIO2_EXTI_DISABLE_FALLING_EDGE() \
+ do{ \
+ EXTI->FTSR &= ~(PWR_EXTI_LINE_VDDIO2); \
+ EXTI->RTSR &= ~(PWR_EXTI_LINE_VDDIO2); \
+ } while(0)
+
+/**
+ * @brief Vddio2 Monitor EXTI line configuration: set falling edge trigger.
+ * @retval None.
+ */
+#define __HAL_PWR_VDDIO2_EXTI_ENABLE_FALLING_EDGE() EXTI->FTSR |= (PWR_EXTI_LINE_VDDIO2)
+
+/**
+ * @brief Check whether the specified VDDIO2 monitor EXTI interrupt flag is set or not.
+ * @retval EXTI VDDIO2 Monitor Line Status.
+ */
+#define __HAL_PWR_VDDIO2_EXTI_GET_FLAG() (EXTI->PR & (PWR_EXTI_LINE_VDDIO2))
+
+/**
+ * @brief Clear the VDDIO2 Monitor EXTI flag.
+ * @retval None.
+ */
+#define __HAL_PWR_VDDIO2_EXTI_CLEAR_FLAG() (EXTI->PR = (PWR_EXTI_LINE_VDDIO2))
+
+/**
+ * @brief Generate a Software interrupt on selected EXTI line.
+ * @retval None.
+ */
+#define __HAL_PWR_VDDIO2_EXTI_GENERATE_SWIT() (EXTI->SWIER |= (PWR_EXTI_LINE_VDDIO2))
+
+
+#endif /* defined (STM32F042x6) || defined (STM32F048xx) ||\
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
+ defined (STM32F091xC) || defined (STM32F098xx) */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup PWREx_Exported_Functions PWREx Exported Functions
+ * @{
+ */
+
+/** @addtogroup PWREx_Exported_Functions_Group1
+ * @{
+ */
+/* I/O operation functions ***************************************************/
+#if defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || \
+ defined (STM32F091xC)
+void HAL_PWR_PVD_IRQHandler(void);
+void HAL_PWR_PVDCallback(void);
+#endif /* defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || */
+ /* defined (STM32F071xB) || defined (STM32F072xB) || */
+ /* defined (STM32F091xC) */
+
+#if defined (STM32F042x6) || defined (STM32F048xx) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
+ defined (STM32F091xC) || defined (STM32F098xx)
+void HAL_PWREx_Vddio2Monitor_IRQHandler(void);
+void HAL_PWREx_Vddio2MonitorCallback(void);
+#endif /* defined (STM32F042x6) || defined (STM32F048xx) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
+ defined (STM32F091xC) || defined (STM32F098xx) */
+
+/* Peripheral Control functions **********************************************/
+#if defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || \
+ defined (STM32F091xC)
+void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD);
+void HAL_PWR_EnablePVD(void);
+void HAL_PWR_DisablePVD(void);
+#endif /* defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || */
+ /* defined (STM32F071xB) || defined (STM32F072xB) || */
+ /* defined (STM32F091xC) */
+
+#if defined (STM32F042x6) || defined (STM32F048xx) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
+ defined (STM32F091xC) || defined (STM32F098xx)
+void HAL_PWREx_EnableVddio2Monitor(void);
+void HAL_PWREx_DisableVddio2Monitor(void);
+#endif /* defined (STM32F042x6) || defined (STM32F048xx) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
+ defined (STM32F091xC) || defined (STM32F098xx) */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_PWR_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h
new file mode 100644
index 0000000..4239c51
--- /dev/null
+++ b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc.h
@@ -0,0 +1,1686 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_rcc.h
+ * @author MCD Application Team
+ * @brief Header file of RCC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_RCC_H
+#define __STM32F0xx_HAL_RCC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup RCC
+ * @{
+ */
+
+/** @addtogroup RCC_Private_Constants
+ * @{
+ */
+
+/** @defgroup RCC_Timeout RCC Timeout
+ * @{
+ */
+
+/* Disable Backup domain write protection state change timeout */
+#define RCC_DBP_TIMEOUT_VALUE (100U) /* 100 ms */
+/* LSE state change timeout */
+#define RCC_LSE_TIMEOUT_VALUE LSE_STARTUP_TIMEOUT
+#define CLOCKSWITCH_TIMEOUT_VALUE (5000U) /* 5 s */
+#define HSE_TIMEOUT_VALUE HSE_STARTUP_TIMEOUT
+#define HSI_TIMEOUT_VALUE (2U) /* 2 ms (minimum Tick + 1U) */
+#define LSI_TIMEOUT_VALUE (2U) /* 2 ms (minimum Tick + 1U) */
+#define PLL_TIMEOUT_VALUE (2U) /* 2 ms (minimum Tick + 1U) */
+#define HSI14_TIMEOUT_VALUE (2U) /* 2 ms (minimum Tick + 1U) */
+#if defined(RCC_HSI48_SUPPORT)
+#define HSI48_TIMEOUT_VALUE (2U) /* 2 ms (minimum Tick + 1U) */
+#endif /* RCC_HSI48_SUPPORT */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Register_Offset Register offsets
+ * @{
+ */
+#define RCC_OFFSET (RCC_BASE - PERIPH_BASE)
+#define RCC_CR_OFFSET 0x00
+#define RCC_CFGR_OFFSET 0x04
+#define RCC_CIR_OFFSET 0x08
+#define RCC_BDCR_OFFSET 0x20
+#define RCC_CSR_OFFSET 0x24
+
+/**
+ * @}
+ */
+
+
+/* CR register byte 2 (Bits[23:16]) base address */
+#define RCC_CR_BYTE2_ADDRESS ((uint32_t)(RCC_BASE + RCC_CR_OFFSET + 0x02U))
+
+/* CIR register byte 1 (Bits[15:8]) base address */
+#define RCC_CIR_BYTE1_ADDRESS ((uint32_t)(RCC_BASE + RCC_CIR_OFFSET + 0x01U))
+
+/* CIR register byte 2 (Bits[23:16]) base address */
+#define RCC_CIR_BYTE2_ADDRESS ((uint32_t)(RCC_BASE + RCC_CIR_OFFSET + 0x02U))
+
+/* Defines used for Flags */
+#define CR_REG_INDEX ((uint8_t)1U)
+#define CR2_REG_INDEX ((uint8_t)2U)
+#define BDCR_REG_INDEX ((uint8_t)3U)
+#define CSR_REG_INDEX ((uint8_t)4U)
+
+/* Bits position in in the CFGR register */
+#define RCC_CFGR_PLLMUL_BITNUMBER 18U
+#define RCC_CFGR_HPRE_BITNUMBER 4U
+#define RCC_CFGR_PPRE_BITNUMBER 8U
+/* Flags in the CFGR2 register */
+#define RCC_CFGR2_PREDIV_BITNUMBER 0
+/* Flags in the CR register */
+#define RCC_CR_HSIRDY_BitNumber 1
+#define RCC_CR_HSERDY_BitNumber 17
+#define RCC_CR_PLLRDY_BitNumber 25
+/* Flags in the CR2 register */
+#define RCC_CR2_HSI14RDY_BitNumber 1
+#define RCC_CR2_HSI48RDY_BitNumber 16
+/* Flags in the BDCR register */
+#define RCC_BDCR_LSERDY_BitNumber 1
+/* Flags in the CSR register */
+#define RCC_CSR_LSIRDY_BitNumber 1
+#define RCC_CSR_V18PWRRSTF_BitNumber 23
+#define RCC_CSR_RMVF_BitNumber 24
+#define RCC_CSR_OBLRSTF_BitNumber 25
+#define RCC_CSR_PINRSTF_BitNumber 26
+#define RCC_CSR_PORRSTF_BitNumber 27
+#define RCC_CSR_SFTRSTF_BitNumber 28
+#define RCC_CSR_IWDGRSTF_BitNumber 29
+#define RCC_CSR_WWDGRSTF_BitNumber 30
+#define RCC_CSR_LPWRRSTF_BitNumber 31
+/* Flags in the HSITRIM register */
+#define RCC_CR_HSITRIM_BitNumber 3
+#define RCC_HSI14TRIM_BIT_NUMBER 3
+#define RCC_FLAG_MASK ((uint8_t)0x1FU)
+
+/**
+ * @}
+ */
+
+/** @addtogroup RCC_Private_Macros
+ * @{
+ */
+#define IS_RCC_HSE(__HSE__) (((__HSE__) == RCC_HSE_OFF) || ((__HSE__) == RCC_HSE_ON) || \
+ ((__HSE__) == RCC_HSE_BYPASS))
+#define IS_RCC_LSE(__LSE__) (((__LSE__) == RCC_LSE_OFF) || ((__LSE__) == RCC_LSE_ON) || \
+ ((__LSE__) == RCC_LSE_BYPASS))
+#define IS_RCC_HSI(__HSI__) (((__HSI__) == RCC_HSI_OFF) || ((__HSI__) == RCC_HSI_ON))
+#define IS_RCC_HSI14(__HSI14__) (((__HSI14__) == RCC_HSI14_OFF) || ((__HSI14__) == RCC_HSI14_ON) || ((__HSI14__) == RCC_HSI14_ADC_CONTROL))
+#define IS_RCC_CALIBRATION_VALUE(__VALUE__) ((__VALUE__) <= 0x1FU)
+#define IS_RCC_LSI(__LSI__) (((__LSI__) == RCC_LSI_OFF) || ((__LSI__) == RCC_LSI_ON))
+#define IS_RCC_PLL(__PLL__) (((__PLL__) == RCC_PLL_NONE) || ((__PLL__) == RCC_PLL_OFF) || \
+ ((__PLL__) == RCC_PLL_ON))
+#define IS_RCC_PREDIV(__PREDIV__) (((__PREDIV__) == RCC_PREDIV_DIV1) || ((__PREDIV__) == RCC_PREDIV_DIV2) || \
+ ((__PREDIV__) == RCC_PREDIV_DIV3) || ((__PREDIV__) == RCC_PREDIV_DIV4) || \
+ ((__PREDIV__) == RCC_PREDIV_DIV5) || ((__PREDIV__) == RCC_PREDIV_DIV6) || \
+ ((__PREDIV__) == RCC_PREDIV_DIV7) || ((__PREDIV__) == RCC_PREDIV_DIV8) || \
+ ((__PREDIV__) == RCC_PREDIV_DIV9) || ((__PREDIV__) == RCC_PREDIV_DIV10) || \
+ ((__PREDIV__) == RCC_PREDIV_DIV11) || ((__PREDIV__) == RCC_PREDIV_DIV12) || \
+ ((__PREDIV__) == RCC_PREDIV_DIV13) || ((__PREDIV__) == RCC_PREDIV_DIV14) || \
+ ((__PREDIV__) == RCC_PREDIV_DIV15) || ((__PREDIV__) == RCC_PREDIV_DIV16))
+
+#define IS_RCC_PLL_MUL(__MUL__) (((__MUL__) == RCC_PLL_MUL2) || ((__MUL__) == RCC_PLL_MUL3) || \
+ ((__MUL__) == RCC_PLL_MUL4) || ((__MUL__) == RCC_PLL_MUL5) || \
+ ((__MUL__) == RCC_PLL_MUL6) || ((__MUL__) == RCC_PLL_MUL7) || \
+ ((__MUL__) == RCC_PLL_MUL8) || ((__MUL__) == RCC_PLL_MUL9) || \
+ ((__MUL__) == RCC_PLL_MUL10) || ((__MUL__) == RCC_PLL_MUL11) || \
+ ((__MUL__) == RCC_PLL_MUL12) || ((__MUL__) == RCC_PLL_MUL13) || \
+ ((__MUL__) == RCC_PLL_MUL14) || ((__MUL__) == RCC_PLL_MUL15) || \
+ ((__MUL__) == RCC_PLL_MUL16))
+#define IS_RCC_CLOCKTYPE(__CLK__) ((((__CLK__) & RCC_CLOCKTYPE_SYSCLK) == RCC_CLOCKTYPE_SYSCLK) || \
+ (((__CLK__) & RCC_CLOCKTYPE_HCLK) == RCC_CLOCKTYPE_HCLK) || \
+ (((__CLK__) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1))
+#define IS_RCC_HCLK(__HCLK__) (((__HCLK__) == RCC_SYSCLK_DIV1) || ((__HCLK__) == RCC_SYSCLK_DIV2) || \
+ ((__HCLK__) == RCC_SYSCLK_DIV4) || ((__HCLK__) == RCC_SYSCLK_DIV8) || \
+ ((__HCLK__) == RCC_SYSCLK_DIV16) || ((__HCLK__) == RCC_SYSCLK_DIV64) || \
+ ((__HCLK__) == RCC_SYSCLK_DIV128) || ((__HCLK__) == RCC_SYSCLK_DIV256) || \
+ ((__HCLK__) == RCC_SYSCLK_DIV512))
+#define IS_RCC_PCLK(__PCLK__) (((__PCLK__) == RCC_HCLK_DIV1) || ((__PCLK__) == RCC_HCLK_DIV2) || \
+ ((__PCLK__) == RCC_HCLK_DIV4) || ((__PCLK__) == RCC_HCLK_DIV8) || \
+ ((__PCLK__) == RCC_HCLK_DIV16))
+#define IS_RCC_MCO(__MCO__) ((__MCO__) == RCC_MCO)
+#define IS_RCC_RTCCLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_RTCCLKSOURCE_NO_CLK) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_LSE) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_LSI) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV32))
+#define IS_RCC_USART1CLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_USART1CLKSOURCE_PCLK1) || \
+ ((__SOURCE__) == RCC_USART1CLKSOURCE_SYSCLK) || \
+ ((__SOURCE__) == RCC_USART1CLKSOURCE_LSE) || \
+ ((__SOURCE__) == RCC_USART1CLKSOURCE_HSI))
+#define IS_RCC_I2C1CLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_I2C1CLKSOURCE_HSI) || \
+ ((__SOURCE__) == RCC_I2C1CLKSOURCE_SYSCLK))
+
+/**
+ * @}
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup RCC_Exported_Types RCC Exported Types
+ * @{
+ */
+
+/**
+ * @brief RCC PLL configuration structure definition
+ */
+typedef struct
+{
+ uint32_t PLLState; /*!< PLLState: The new state of the PLL.
+ This parameter can be a value of @ref RCC_PLL_Config */
+
+ uint32_t PLLSource; /*!< PLLSource: PLL entry clock source.
+ This parameter must be a value of @ref RCC_PLL_Clock_Source */
+
+ uint32_t PLLMUL; /*!< PLLMUL: Multiplication factor for PLL VCO input clock
+ This parameter must be a value of @ref RCC_PLL_Multiplication_Factor*/
+
+ uint32_t PREDIV; /*!< PREDIV: Predivision factor for PLL VCO input clock
+ This parameter must be a value of @ref RCC_PLL_Prediv_Factor */
+
+} RCC_PLLInitTypeDef;
+
+/**
+ * @brief RCC Internal/External Oscillator (HSE, HSI, LSE and LSI) configuration structure definition
+ */
+typedef struct
+{
+ uint32_t OscillatorType; /*!< The oscillators to be configured.
+ This parameter can be a value of @ref RCC_Oscillator_Type */
+
+ uint32_t HSEState; /*!< The new state of the HSE.
+ This parameter can be a value of @ref RCC_HSE_Config */
+
+ uint32_t LSEState; /*!< The new state of the LSE.
+ This parameter can be a value of @ref RCC_LSE_Config */
+
+ uint32_t HSIState; /*!< The new state of the HSI.
+ This parameter can be a value of @ref RCC_HSI_Config */
+
+ uint32_t HSICalibrationValue; /*!< The HSI calibration trimming value (default is RCC_HSICALIBRATION_DEFAULT).
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1FU */
+
+ uint32_t HSI14State; /*!< The new state of the HSI14.
+ This parameter can be a value of @ref RCC_HSI14_Config */
+
+ uint32_t HSI14CalibrationValue; /*!< The HSI14 calibration trimming value (default is RCC_HSI14CALIBRATION_DEFAULT).
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1FU */
+
+ uint32_t LSIState; /*!< The new state of the LSI.
+ This parameter can be a value of @ref RCC_LSI_Config */
+
+#if defined(RCC_HSI48_SUPPORT)
+ uint32_t HSI48State; /*!< The new state of the HSI48.
+ This parameter can be a value of @ref RCC_HSI48_Config */
+
+#endif /* RCC_HSI48_SUPPORT */
+ RCC_PLLInitTypeDef PLL; /*!< PLL structure parameters */
+
+} RCC_OscInitTypeDef;
+
+/**
+ * @brief RCC System, AHB and APB busses clock configuration structure definition
+ */
+typedef struct
+{
+ uint32_t ClockType; /*!< The clock to be configured.
+ This parameter can be a value of @ref RCC_System_Clock_Type */
+
+ uint32_t SYSCLKSource; /*!< The clock source (SYSCLKS) used as system clock.
+ This parameter can be a value of @ref RCC_System_Clock_Source */
+
+ uint32_t AHBCLKDivider; /*!< The AHB clock (HCLK) divider. This clock is derived from the system clock (SYSCLK).
+ This parameter can be a value of @ref RCC_AHB_Clock_Source */
+
+ uint32_t APB1CLKDivider; /*!< The APB1 clock (PCLK1) divider. This clock is derived from the AHB clock (HCLK).
+ This parameter can be a value of @ref RCC_APB1_Clock_Source */
+
+} RCC_ClkInitTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup RCC_Exported_Constants RCC Exported Constants
+ * @{
+ */
+
+/** @defgroup RCC_PLL_Clock_Source PLL Clock Source
+ * @{
+ */
+
+#define RCC_PLLSOURCE_HSE RCC_CFGR_PLLSRC_HSE_PREDIV /*!< HSE clock selected as PLL entry clock source */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Oscillator_Type Oscillator Type
+ * @{
+ */
+#define RCC_OSCILLATORTYPE_NONE (0x00000000U)
+#define RCC_OSCILLATORTYPE_HSE (0x00000001U)
+#define RCC_OSCILLATORTYPE_HSI (0x00000002U)
+#define RCC_OSCILLATORTYPE_LSE (0x00000004U)
+#define RCC_OSCILLATORTYPE_LSI (0x00000008U)
+#define RCC_OSCILLATORTYPE_HSI14 (0x00000010U)
+#if defined(RCC_HSI48_SUPPORT)
+#define RCC_OSCILLATORTYPE_HSI48 (0x00000020U)
+#endif /* RCC_HSI48_SUPPORT */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_HSE_Config HSE Config
+ * @{
+ */
+#define RCC_HSE_OFF (0x00000000U) /*!< HSE clock deactivation */
+#define RCC_HSE_ON (0x00000001U) /*!< HSE clock activation */
+#define RCC_HSE_BYPASS (0x00000005U) /*!< External clock source for HSE clock */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LSE_Config LSE Config
+ * @{
+ */
+#define RCC_LSE_OFF (0x00000000U) /*!< LSE clock deactivation */
+#define RCC_LSE_ON (0x00000001U) /*!< LSE clock activation */
+#define RCC_LSE_BYPASS (0x00000005U) /*!< External clock source for LSE clock */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_HSI_Config HSI Config
+ * @{
+ */
+#define RCC_HSI_OFF (0x00000000U) /*!< HSI clock deactivation */
+#define RCC_HSI_ON RCC_CR_HSION /*!< HSI clock activation */
+
+#define RCC_HSICALIBRATION_DEFAULT (0x10U) /* Default HSI calibration trimming value */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_HSI14_Config RCC HSI14 Config
+ * @{
+ */
+#define RCC_HSI14_OFF (0x00000000U)
+#define RCC_HSI14_ON RCC_CR2_HSI14ON
+#define RCC_HSI14_ADC_CONTROL (~RCC_CR2_HSI14DIS)
+
+#define RCC_HSI14CALIBRATION_DEFAULT (0x10U) /* Default HSI14 calibration trimming value */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LSI_Config LSI Config
+ * @{
+ */
+#define RCC_LSI_OFF (0x00000000U) /*!< LSI clock deactivation */
+#define RCC_LSI_ON RCC_CSR_LSION /*!< LSI clock activation */
+
+/**
+ * @}
+ */
+
+#if defined(RCC_HSI48_SUPPORT)
+/** @defgroup RCC_HSI48_Config HSI48 Config
+ * @{
+ */
+#define RCC_HSI48_OFF ((uint8_t)0x00U)
+#define RCC_HSI48_ON ((uint8_t)0x01U)
+
+/**
+ * @}
+ */
+#endif /* RCC_HSI48_SUPPORT */
+
+/** @defgroup RCC_PLL_Config PLL Config
+ * @{
+ */
+#define RCC_PLL_NONE (0x00000000U) /*!< PLL is not configured */
+#define RCC_PLL_OFF (0x00000001U) /*!< PLL deactivation */
+#define RCC_PLL_ON (0x00000002U) /*!< PLL activation */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_System_Clock_Type System Clock Type
+ * @{
+ */
+#define RCC_CLOCKTYPE_SYSCLK (0x00000001U) /*!< SYSCLK to configure */
+#define RCC_CLOCKTYPE_HCLK (0x00000002U) /*!< HCLK to configure */
+#define RCC_CLOCKTYPE_PCLK1 (0x00000004U) /*!< PCLK1 to configure */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_System_Clock_Source System Clock Source
+ * @{
+ */
+#define RCC_SYSCLKSOURCE_HSI RCC_CFGR_SW_HSI /*!< HSI selected as system clock */
+#define RCC_SYSCLKSOURCE_HSE RCC_CFGR_SW_HSE /*!< HSE selected as system clock */
+#define RCC_SYSCLKSOURCE_PLLCLK RCC_CFGR_SW_PLL /*!< PLL selected as system clock */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_System_Clock_Source_Status System Clock Source Status
+ * @{
+ */
+#define RCC_SYSCLKSOURCE_STATUS_HSI RCC_CFGR_SWS_HSI /*!< HSI used as system clock */
+#define RCC_SYSCLKSOURCE_STATUS_HSE RCC_CFGR_SWS_HSE /*!< HSE used as system clock */
+#define RCC_SYSCLKSOURCE_STATUS_PLLCLK RCC_CFGR_SWS_PLL /*!< PLL used as system clock */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_AHB_Clock_Source AHB Clock Source
+ * @{
+ */
+#define RCC_SYSCLK_DIV1 RCC_CFGR_HPRE_DIV1 /*!< SYSCLK not divided */
+#define RCC_SYSCLK_DIV2 RCC_CFGR_HPRE_DIV2 /*!< SYSCLK divided by 2 */
+#define RCC_SYSCLK_DIV4 RCC_CFGR_HPRE_DIV4 /*!< SYSCLK divided by 4 */
+#define RCC_SYSCLK_DIV8 RCC_CFGR_HPRE_DIV8 /*!< SYSCLK divided by 8 */
+#define RCC_SYSCLK_DIV16 RCC_CFGR_HPRE_DIV16 /*!< SYSCLK divided by 16 */
+#define RCC_SYSCLK_DIV64 RCC_CFGR_HPRE_DIV64 /*!< SYSCLK divided by 64 */
+#define RCC_SYSCLK_DIV128 RCC_CFGR_HPRE_DIV128 /*!< SYSCLK divided by 128 */
+#define RCC_SYSCLK_DIV256 RCC_CFGR_HPRE_DIV256 /*!< SYSCLK divided by 256 */
+#define RCC_SYSCLK_DIV512 RCC_CFGR_HPRE_DIV512 /*!< SYSCLK divided by 512 */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB1_Clock_Source RCC APB1 Clock Source
+ * @{
+ */
+#define RCC_HCLK_DIV1 RCC_CFGR_PPRE_DIV1 /*!< HCLK not divided */
+#define RCC_HCLK_DIV2 RCC_CFGR_PPRE_DIV2 /*!< HCLK divided by 2 */
+#define RCC_HCLK_DIV4 RCC_CFGR_PPRE_DIV4 /*!< HCLK divided by 4 */
+#define RCC_HCLK_DIV8 RCC_CFGR_PPRE_DIV8 /*!< HCLK divided by 8 */
+#define RCC_HCLK_DIV16 RCC_CFGR_PPRE_DIV16 /*!< HCLK divided by 16 */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_RTC_Clock_Source RTC Clock Source
+ * @{
+ */
+#define RCC_RTCCLKSOURCE_NO_CLK (0x00000000U) /*!< No clock */
+#define RCC_RTCCLKSOURCE_LSE RCC_BDCR_RTCSEL_LSE /*!< LSE oscillator clock used as RTC clock */
+#define RCC_RTCCLKSOURCE_LSI RCC_BDCR_RTCSEL_LSI /*!< LSI oscillator clock used as RTC clock */
+#define RCC_RTCCLKSOURCE_HSE_DIV32 RCC_BDCR_RTCSEL_HSE /*!< HSE oscillator clock divided by 32 used as RTC clock */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_PLL_Multiplication_Factor RCC PLL Multiplication Factor
+ * @{
+ */
+#define RCC_PLL_MUL2 RCC_CFGR_PLLMUL2
+#define RCC_PLL_MUL3 RCC_CFGR_PLLMUL3
+#define RCC_PLL_MUL4 RCC_CFGR_PLLMUL4
+#define RCC_PLL_MUL5 RCC_CFGR_PLLMUL5
+#define RCC_PLL_MUL6 RCC_CFGR_PLLMUL6
+#define RCC_PLL_MUL7 RCC_CFGR_PLLMUL7
+#define RCC_PLL_MUL8 RCC_CFGR_PLLMUL8
+#define RCC_PLL_MUL9 RCC_CFGR_PLLMUL9
+#define RCC_PLL_MUL10 RCC_CFGR_PLLMUL10
+#define RCC_PLL_MUL11 RCC_CFGR_PLLMUL11
+#define RCC_PLL_MUL12 RCC_CFGR_PLLMUL12
+#define RCC_PLL_MUL13 RCC_CFGR_PLLMUL13
+#define RCC_PLL_MUL14 RCC_CFGR_PLLMUL14
+#define RCC_PLL_MUL15 RCC_CFGR_PLLMUL15
+#define RCC_PLL_MUL16 RCC_CFGR_PLLMUL16
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_PLL_Prediv_Factor RCC PLL Prediv Factor
+ * @{
+ */
+
+#define RCC_PREDIV_DIV1 RCC_CFGR2_PREDIV_DIV1
+#define RCC_PREDIV_DIV2 RCC_CFGR2_PREDIV_DIV2
+#define RCC_PREDIV_DIV3 RCC_CFGR2_PREDIV_DIV3
+#define RCC_PREDIV_DIV4 RCC_CFGR2_PREDIV_DIV4
+#define RCC_PREDIV_DIV5 RCC_CFGR2_PREDIV_DIV5
+#define RCC_PREDIV_DIV6 RCC_CFGR2_PREDIV_DIV6
+#define RCC_PREDIV_DIV7 RCC_CFGR2_PREDIV_DIV7
+#define RCC_PREDIV_DIV8 RCC_CFGR2_PREDIV_DIV8
+#define RCC_PREDIV_DIV9 RCC_CFGR2_PREDIV_DIV9
+#define RCC_PREDIV_DIV10 RCC_CFGR2_PREDIV_DIV10
+#define RCC_PREDIV_DIV11 RCC_CFGR2_PREDIV_DIV11
+#define RCC_PREDIV_DIV12 RCC_CFGR2_PREDIV_DIV12
+#define RCC_PREDIV_DIV13 RCC_CFGR2_PREDIV_DIV13
+#define RCC_PREDIV_DIV14 RCC_CFGR2_PREDIV_DIV14
+#define RCC_PREDIV_DIV15 RCC_CFGR2_PREDIV_DIV15
+#define RCC_PREDIV_DIV16 RCC_CFGR2_PREDIV_DIV16
+
+/**
+ * @}
+ */
+
+
+/** @defgroup RCC_USART1_Clock_Source RCC USART1 Clock Source
+ * @{
+ */
+#define RCC_USART1CLKSOURCE_PCLK1 RCC_CFGR3_USART1SW_PCLK
+#define RCC_USART1CLKSOURCE_SYSCLK RCC_CFGR3_USART1SW_SYSCLK
+#define RCC_USART1CLKSOURCE_LSE RCC_CFGR3_USART1SW_LSE
+#define RCC_USART1CLKSOURCE_HSI RCC_CFGR3_USART1SW_HSI
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_I2C1_Clock_Source RCC I2C1 Clock Source
+ * @{
+ */
+#define RCC_I2C1CLKSOURCE_HSI RCC_CFGR3_I2C1SW_HSI
+#define RCC_I2C1CLKSOURCE_SYSCLK RCC_CFGR3_I2C1SW_SYSCLK
+
+/**
+ * @}
+ */
+/** @defgroup RCC_MCO_Index MCO Index
+ * @{
+ */
+#define RCC_MCO1 (0x00000000U)
+#define RCC_MCO RCC_MCO1 /*!< MCO1 to be compliant with other families with 2 MCOs*/
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_MCO_Clock_Source RCC MCO Clock Source
+ * @{
+ */
+#define RCC_MCO1SOURCE_NOCLOCK RCC_CFGR_MCO_NOCLOCK
+#define RCC_MCO1SOURCE_LSI RCC_CFGR_MCO_LSI
+#define RCC_MCO1SOURCE_LSE RCC_CFGR_MCO_LSE
+#define RCC_MCO1SOURCE_SYSCLK RCC_CFGR_MCO_SYSCLK
+#define RCC_MCO1SOURCE_HSI RCC_CFGR_MCO_HSI
+#define RCC_MCO1SOURCE_HSE RCC_CFGR_MCO_HSE
+#define RCC_MCO1SOURCE_PLLCLK_DIV2 RCC_CFGR_MCO_PLL
+#define RCC_MCO1SOURCE_HSI14 RCC_CFGR_MCO_HSI14
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Interrupt Interrupts
+ * @{
+ */
+#define RCC_IT_LSIRDY ((uint8_t)RCC_CIR_LSIRDYF) /*!< LSI Ready Interrupt flag */
+#define RCC_IT_LSERDY ((uint8_t)RCC_CIR_LSERDYF) /*!< LSE Ready Interrupt flag */
+#define RCC_IT_HSIRDY ((uint8_t)RCC_CIR_HSIRDYF) /*!< HSI Ready Interrupt flag */
+#define RCC_IT_HSERDY ((uint8_t)RCC_CIR_HSERDYF) /*!< HSE Ready Interrupt flag */
+#define RCC_IT_PLLRDY ((uint8_t)RCC_CIR_PLLRDYF) /*!< PLL Ready Interrupt flag */
+#define RCC_IT_HSI14RDY ((uint8_t)RCC_CIR_HSI14RDYF) /*!< HSI14 Ready Interrupt flag */
+#if defined(RCC_CIR_HSI48RDYF)
+#define RCC_IT_HSI48RDY ((uint8_t)RCC_CIR_HSI48RDYF) /*!< HSI48 Ready Interrupt flag */
+#endif
+#define RCC_IT_CSS ((uint8_t)RCC_CIR_CSSF) /*!< Clock Security System Interrupt flag */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Flag Flags
+ * Elements values convention: XXXYYYYYb
+ * - YYYYY : Flag position in the register
+ * - XXX : Register index
+ * - 001: CR register
+ * - 010: CR2 register
+ * - 011: BDCR register
+ * - 0100: CSR register
+ * @{
+ */
+/* Flags in the CR register */
+#define RCC_FLAG_HSIRDY ((uint8_t)((CR_REG_INDEX << 5U) | RCC_CR_HSIRDY_BitNumber))
+#define RCC_FLAG_HSERDY ((uint8_t)((CR_REG_INDEX << 5U) | RCC_CR_HSERDY_BitNumber))
+#define RCC_FLAG_PLLRDY ((uint8_t)((CR_REG_INDEX << 5U) | RCC_CR_PLLRDY_BitNumber))
+/* Flags in the CR2 register */
+#define RCC_FLAG_HSI14RDY ((uint8_t)((CR2_REG_INDEX << 5U) | RCC_CR2_HSI14RDY_BitNumber))
+
+/* Flags in the CSR register */
+#define RCC_FLAG_LSIRDY ((uint8_t)((CSR_REG_INDEX << 5U) | RCC_CSR_LSIRDY_BitNumber))
+#if defined(RCC_CSR_V18PWRRSTF)
+#define RCC_FLAG_V18PWRRST ((uint8_t)((CSR_REG_INDEX << 5U) | RCC_CSR_V18PWRRSTF_BitNumber))
+#endif
+#define RCC_FLAG_OBLRST ((uint8_t)((CSR_REG_INDEX << 5U) | RCC_CSR_OBLRSTF_BitNumber))
+#define RCC_FLAG_PINRST ((uint8_t)((CSR_REG_INDEX << 5U) | RCC_CSR_PINRSTF_BitNumber)) /*!< PIN reset flag */
+#define RCC_FLAG_PORRST ((uint8_t)((CSR_REG_INDEX << 5U) | RCC_CSR_PORRSTF_BitNumber)) /*!< POR/PDR reset flag */
+#define RCC_FLAG_SFTRST ((uint8_t)((CSR_REG_INDEX << 5U) | RCC_CSR_SFTRSTF_BitNumber)) /*!< Software Reset flag */
+#define RCC_FLAG_IWDGRST ((uint8_t)((CSR_REG_INDEX << 5U) | RCC_CSR_IWDGRSTF_BitNumber)) /*!< Independent Watchdog reset flag */
+#define RCC_FLAG_WWDGRST ((uint8_t)((CSR_REG_INDEX << 5U) | RCC_CSR_WWDGRSTF_BitNumber)) /*!< Window watchdog reset flag */
+#define RCC_FLAG_LPWRRST ((uint8_t)((CSR_REG_INDEX << 5U) | RCC_CSR_LPWRRSTF_BitNumber)) /*!< Low-Power reset flag */
+
+/* Flags in the BDCR register */
+#define RCC_FLAG_LSERDY ((uint8_t)((BDCR_REG_INDEX << 5U) | RCC_BDCR_LSERDY_BitNumber)) /*!< External Low Speed oscillator Ready */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup RCC_Exported_Macros RCC Exported Macros
+ * @{
+ */
+
+/** @defgroup RCC_AHB_Clock_Enable_Disable RCC AHB Clock Enable Disable
+ * @brief Enable or disable the AHB peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_GPIOA_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHBENR, RCC_AHBENR_GPIOAEN);\
+ /* Delay after an RCC peripheral clock enabling */\
+ tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_GPIOAEN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_GPIOB_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHBENR, RCC_AHBENR_GPIOBEN);\
+ /* Delay after an RCC peripheral clock enabling */\
+ tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_GPIOBEN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_GPIOC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHBENR, RCC_AHBENR_GPIOCEN);\
+ /* Delay after an RCC peripheral clock enabling */\
+ tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_GPIOCEN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_GPIOF_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHBENR, RCC_AHBENR_GPIOFEN);\
+ /* Delay after an RCC peripheral clock enabling */\
+ tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_GPIOFEN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_CRC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHBENR, RCC_AHBENR_CRCEN);\
+ /* Delay after an RCC peripheral clock enabling */\
+ tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_CRCEN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_DMA1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHBENR, RCC_AHBENR_DMA1EN);\
+ /* Delay after an RCC peripheral clock enabling */\
+ tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_DMA1EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_SRAM_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHBENR, RCC_AHBENR_SRAMEN);\
+ /* Delay after an RCC peripheral clock enabling */\
+ tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_SRAMEN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_FLITF_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHBENR, RCC_AHBENR_FLITFEN);\
+ /* Delay after an RCC peripheral clock enabling */\
+ tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_FLITFEN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+
+#define __HAL_RCC_GPIOA_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOAEN))
+#define __HAL_RCC_GPIOB_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOBEN))
+#define __HAL_RCC_GPIOC_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOCEN))
+#define __HAL_RCC_GPIOF_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOFEN))
+#define __HAL_RCC_CRC_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_CRCEN))
+#define __HAL_RCC_DMA1_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_DMA1EN))
+#define __HAL_RCC_SRAM_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_SRAMEN))
+#define __HAL_RCC_FLITF_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_FLITFEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_AHB_Peripheral_Clock_Enable_Disable_Status AHB Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the AHB peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_GPIOA_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOAEN)) != RESET)
+#define __HAL_RCC_GPIOB_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOBEN)) != RESET)
+#define __HAL_RCC_GPIOC_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOCEN)) != RESET)
+#define __HAL_RCC_GPIOF_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOFEN)) != RESET)
+#define __HAL_RCC_CRC_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_CRCEN)) != RESET)
+#define __HAL_RCC_DMA1_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_DMA1EN)) != RESET)
+#define __HAL_RCC_SRAM_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_SRAMEN)) != RESET)
+#define __HAL_RCC_FLITF_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_FLITFEN)) != RESET)
+#define __HAL_RCC_GPIOA_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOAEN)) == RESET)
+#define __HAL_RCC_GPIOB_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOBEN)) == RESET)
+#define __HAL_RCC_GPIOC_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOCEN)) == RESET)
+#define __HAL_RCC_GPIOF_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOFEN)) == RESET)
+#define __HAL_RCC_CRC_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_CRCEN)) == RESET)
+#define __HAL_RCC_DMA1_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_DMA1EN)) == RESET)
+#define __HAL_RCC_SRAM_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_SRAMEN)) == RESET)
+#define __HAL_RCC_FLITF_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_FLITFEN)) == RESET)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB1_Clock_Enable_Disable RCC APB1 Clock Enable Disable
+ * @brief Enable or disable the Low Speed APB (APB1) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_TIM3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\
+ /* Delay after an RCC peripheral clock enabling */\
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_TIM14_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\
+ /* Delay after an RCC peripheral clock enabling */\
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_WWDG_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_WWDGEN);\
+ /* Delay after an RCC peripheral clock enabling */\
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_WWDGEN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_I2C1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C1EN);\
+ /* Delay after an RCC peripheral clock enabling */\
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C1EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_PWR_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_PWREN);\
+ /* Delay after an RCC peripheral clock enabling */\
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_PWREN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+
+#define __HAL_RCC_TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN))
+#define __HAL_RCC_TIM14_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM14EN))
+#define __HAL_RCC_WWDG_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_WWDGEN))
+#define __HAL_RCC_I2C1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C1EN))
+#define __HAL_RCC_PWR_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_PWREN))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB1_Peripheral_Clock_Enable_Disable_Status APB1 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the APB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_TIM3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) != RESET)
+#define __HAL_RCC_TIM14_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) != RESET)
+#define __HAL_RCC_WWDG_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_WWDGEN)) != RESET)
+#define __HAL_RCC_I2C1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C1EN)) != RESET)
+#define __HAL_RCC_PWR_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_PWREN)) != RESET)
+#define __HAL_RCC_TIM3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) == RESET)
+#define __HAL_RCC_TIM14_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) == RESET)
+#define __HAL_RCC_WWDG_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_WWDGEN)) == RESET)
+#define __HAL_RCC_I2C1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C1EN)) == RESET)
+#define __HAL_RCC_PWR_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_PWREN)) == RESET)
+/**
+ * @}
+ */
+
+
+/** @defgroup RCC_APB2_Clock_Enable_Disable RCC APB2 Clock Enable Disable
+ * @brief Enable or disable the High Speed APB (APB2) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_SYSCFG_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SYSCFGEN);\
+ /* Delay after an RCC peripheral clock enabling */\
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SYSCFGEN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_ADC1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC1EN);\
+ /* Delay after an RCC peripheral clock enabling */\
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC1EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_TIM1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN);\
+ /* Delay after an RCC peripheral clock enabling */\
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_SPI1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN);\
+ /* Delay after an RCC peripheral clock enabling */\
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_TIM16_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM16EN);\
+ /* Delay after an RCC peripheral clock enabling */\
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM16EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_TIM17_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM17EN);\
+ /* Delay after an RCC peripheral clock enabling */\
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM17EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_USART1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN);\
+ /* Delay after an RCC peripheral clock enabling */\
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_DBGMCU_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_DBGMCUEN);\
+ /* Delay after an RCC peripheral clock enabling */\
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_DBGMCUEN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+
+#define __HAL_RCC_SYSCFG_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SYSCFGEN))
+#define __HAL_RCC_ADC1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC1EN))
+#define __HAL_RCC_TIM1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM1EN))
+#define __HAL_RCC_SPI1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI1EN))
+#define __HAL_RCC_TIM16_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM16EN))
+#define __HAL_RCC_TIM17_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM17EN))
+#define __HAL_RCC_USART1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART1EN))
+#define __HAL_RCC_DBGMCU_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_DBGMCUEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB2_Peripheral_Clock_Enable_Disable_Status APB2 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the APB2 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_SYSCFG_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SYSCFGEN)) != RESET)
+#define __HAL_RCC_ADC1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC1EN)) != RESET)
+#define __HAL_RCC_TIM1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM1EN)) != RESET)
+#define __HAL_RCC_SPI1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI1EN)) != RESET)
+#define __HAL_RCC_TIM16_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM16EN)) != RESET)
+#define __HAL_RCC_TIM17_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM17EN)) != RESET)
+#define __HAL_RCC_USART1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART1EN)) != RESET)
+#define __HAL_RCC_DBGMCU_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_DBGMCUEN)) != RESET)
+#define __HAL_RCC_SYSCFG_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SYSCFGEN)) == RESET)
+#define __HAL_RCC_ADC1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC1EN)) == RESET)
+#define __HAL_RCC_TIM1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM1EN)) == RESET)
+#define __HAL_RCC_SPI1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI1EN)) == RESET)
+#define __HAL_RCC_TIM16_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM16EN)) == RESET)
+#define __HAL_RCC_TIM17_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM17EN)) == RESET)
+#define __HAL_RCC_USART1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART1EN)) == RESET)
+#define __HAL_RCC_DBGMCU_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_DBGMCUEN)) == RESET)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_AHB_Force_Release_Reset RCC AHB Force Release Reset
+ * @brief Force or release AHB peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_AHB_FORCE_RESET() (RCC->AHBRSTR = 0xFFFFFFFFU)
+#define __HAL_RCC_GPIOA_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOARST))
+#define __HAL_RCC_GPIOB_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOBRST))
+#define __HAL_RCC_GPIOC_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOCRST))
+#define __HAL_RCC_GPIOF_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOFRST))
+
+#define __HAL_RCC_AHB_RELEASE_RESET() (RCC->AHBRSTR = 0x00000000U)
+#define __HAL_RCC_GPIOA_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOARST))
+#define __HAL_RCC_GPIOB_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOBRST))
+#define __HAL_RCC_GPIOC_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOCRST))
+#define __HAL_RCC_GPIOF_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOFRST))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB1_Force_Release_Reset RCC APB1 Force Release Reset
+ * @brief Force or release APB1 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_APB1_FORCE_RESET() (RCC->APB1RSTR = 0xFFFFFFFFU)
+#define __HAL_RCC_TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST))
+#define __HAL_RCC_TIM14_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM14RST))
+#define __HAL_RCC_WWDG_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_WWDGRST))
+#define __HAL_RCC_I2C1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C1RST))
+#define __HAL_RCC_PWR_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_PWRRST))
+
+#define __HAL_RCC_APB1_RELEASE_RESET() (RCC->APB1RSTR = 0x00000000U)
+#define __HAL_RCC_TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST))
+#define __HAL_RCC_TIM14_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM14RST))
+#define __HAL_RCC_WWDG_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_WWDGRST))
+#define __HAL_RCC_I2C1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C1RST))
+#define __HAL_RCC_PWR_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_PWRRST))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB2_Force_Release_Reset RCC APB2 Force Release Reset
+ * @brief Force or release APB2 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_APB2_FORCE_RESET() (RCC->APB2RSTR = 0xFFFFFFFFU)
+#define __HAL_RCC_SYSCFG_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SYSCFGRST))
+#define __HAL_RCC_ADC1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_ADC1RST))
+#define __HAL_RCC_TIM1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM1RST))
+#define __HAL_RCC_SPI1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI1RST))
+#define __HAL_RCC_USART1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART1RST))
+#define __HAL_RCC_TIM16_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM16RST))
+#define __HAL_RCC_TIM17_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM17RST))
+#define __HAL_RCC_DBGMCU_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_DBGMCURST))
+
+#define __HAL_RCC_APB2_RELEASE_RESET() (RCC->APB2RSTR = 0x00000000U)
+#define __HAL_RCC_SYSCFG_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SYSCFGRST))
+#define __HAL_RCC_ADC1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_ADC1RST))
+#define __HAL_RCC_TIM1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM1RST))
+#define __HAL_RCC_SPI1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI1RST))
+#define __HAL_RCC_USART1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART1RST))
+#define __HAL_RCC_TIM16_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM16RST))
+#define __HAL_RCC_TIM17_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM17RST))
+#define __HAL_RCC_DBGMCU_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_DBGMCURST))
+/**
+ * @}
+ */
+/** @defgroup RCC_HSI_Configuration HSI Configuration
+ * @{
+ */
+
+/** @brief Macros to enable or disable the Internal High Speed oscillator (HSI).
+ * @note The HSI is stopped by hardware when entering STOP and STANDBY modes.
+ * @note HSI can not be stopped if it is used as system clock source. In this case,
+ * you have to select another source of the system clock then stop the HSI.
+ * @note After enabling the HSI, the application software should wait on HSIRDY
+ * flag to be set indicating that HSI clock is stable and can be used as
+ * system clock source.
+ * @note When the HSI is stopped, HSIRDY flag goes low after 6 HSI oscillator
+ * clock cycles.
+ */
+#define __HAL_RCC_HSI_ENABLE() SET_BIT(RCC->CR, RCC_CR_HSION)
+#define __HAL_RCC_HSI_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_HSION)
+
+/** @brief Macro to adjust the Internal High Speed oscillator (HSI) calibration value.
+ * @note The calibration is used to compensate for the variations in voltage
+ * and temperature that influence the frequency of the internal HSI RC.
+ * @param _HSICALIBRATIONVALUE_ specifies the calibration trimming value.
+ * (default is RCC_HSICALIBRATION_DEFAULT).
+ * This parameter must be a number between 0 and 0x1F.
+ */
+#define __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(_HSICALIBRATIONVALUE_) \
+ MODIFY_REG(RCC->CR, RCC_CR_HSITRIM, (uint32_t)(_HSICALIBRATIONVALUE_) << RCC_CR_HSITRIM_BitNumber)
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LSI_Configuration LSI Configuration
+ * @{
+ */
+
+/** @brief Macro to enable the Internal Low Speed oscillator (LSI).
+ * @note After enabling the LSI, the application software should wait on
+ * LSIRDY flag to be set indicating that LSI clock is stable and can
+ * be used to clock the IWDG and/or the RTC.
+ */
+#define __HAL_RCC_LSI_ENABLE() SET_BIT(RCC->CSR, RCC_CSR_LSION)
+
+/** @brief Macro to disable the Internal Low Speed oscillator (LSI).
+ * @note LSI can not be disabled if the IWDG is running.
+ * @note When the LSI is stopped, LSIRDY flag goes low after 6 LSI oscillator
+ * clock cycles.
+ */
+#define __HAL_RCC_LSI_DISABLE() CLEAR_BIT(RCC->CSR, RCC_CSR_LSION)
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_HSE_Configuration HSE Configuration
+ * @{
+ */
+
+/**
+ * @brief Macro to configure the External High Speed oscillator (HSE).
+ * @note Transition HSE Bypass to HSE On and HSE On to HSE Bypass are not
+ * supported by this macro. User should request a transition to HSE Off
+ * first and then HSE On or HSE Bypass.
+ * @note After enabling the HSE (RCC_HSE_ON or RCC_HSE_Bypass), the application
+ * software should wait on HSERDY flag to be set indicating that HSE clock
+ * is stable and can be used to clock the PLL and/or system clock.
+ * @note HSE state can not be changed if it is used directly or through the
+ * PLL as system clock. In this case, you have to select another source
+ * of the system clock then change the HSE state (ex. disable it).
+ * @note The HSE is stopped by hardware when entering STOP and STANDBY modes.
+ * @note This function reset the CSSON bit, so if the clock security system(CSS)
+ * was previously enabled you have to enable it again after calling this
+ * function.
+ * @param __STATE__ specifies the new state of the HSE.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_HSE_OFF turn OFF the HSE oscillator, HSERDY flag goes low after
+ * 6 HSE oscillator clock cycles.
+ * @arg @ref RCC_HSE_ON turn ON the HSE oscillator
+ * @arg @ref RCC_HSE_BYPASS HSE oscillator bypassed with external clock
+ */
+#define __HAL_RCC_HSE_CONFIG(__STATE__) \
+ do{ \
+ if ((__STATE__) == RCC_HSE_ON) \
+ { \
+ SET_BIT(RCC->CR, RCC_CR_HSEON); \
+ } \
+ else if ((__STATE__) == RCC_HSE_OFF) \
+ { \
+ CLEAR_BIT(RCC->CR, RCC_CR_HSEON); \
+ CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); \
+ } \
+ else if ((__STATE__) == RCC_HSE_BYPASS) \
+ { \
+ SET_BIT(RCC->CR, RCC_CR_HSEBYP); \
+ SET_BIT(RCC->CR, RCC_CR_HSEON); \
+ } \
+ else \
+ { \
+ CLEAR_BIT(RCC->CR, RCC_CR_HSEON); \
+ CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); \
+ } \
+ }while(0U)
+
+/**
+ * @brief Macro to configure the External High Speed oscillator (HSE) Predivision factor for PLL.
+ * @note Predivision factor can not be changed if PLL is used as system clock
+ * In this case, you have to select another source of the system clock, disable the PLL and
+ * then change the HSE predivision factor.
+ * @param __HSE_PREDIV_VALUE__ specifies the division value applied to HSE.
+ * This parameter must be a number between RCC_HSE_PREDIV_DIV1 and RCC_HSE_PREDIV_DIV16.
+ */
+#define __HAL_RCC_HSE_PREDIV_CONFIG(__HSE_PREDIV_VALUE__) \
+ MODIFY_REG(RCC->CFGR2, RCC_CFGR2_PREDIV, (uint32_t)(__HSE_PREDIV_VALUE__))
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LSE_Configuration LSE Configuration
+ * @{
+ */
+
+/**
+ * @brief Macro to configure the External Low Speed oscillator (LSE).
+ * @note Transitions LSE Bypass to LSE On and LSE On to LSE Bypass are not supported by this macro.
+ * @note As the LSE is in the Backup domain and write access is denied to
+ * this domain after reset, you have to enable write access using
+ * @ref HAL_PWR_EnableBkUpAccess() function before to configure the LSE
+ * (to be done once after reset).
+ * @note After enabling the LSE (RCC_LSE_ON or RCC_LSE_BYPASS), the application
+ * software should wait on LSERDY flag to be set indicating that LSE clock
+ * is stable and can be used to clock the RTC.
+ * @param __STATE__ specifies the new state of the LSE.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_LSE_OFF turn OFF the LSE oscillator, LSERDY flag goes low after
+ * 6 LSE oscillator clock cycles.
+ * @arg @ref RCC_LSE_ON turn ON the LSE oscillator.
+ * @arg @ref RCC_LSE_BYPASS LSE oscillator bypassed with external clock.
+ */
+#define __HAL_RCC_LSE_CONFIG(__STATE__) \
+ do{ \
+ if ((__STATE__) == RCC_LSE_ON) \
+ { \
+ SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); \
+ } \
+ else if ((__STATE__) == RCC_LSE_OFF) \
+ { \
+ CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON); \
+ CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \
+ } \
+ else if ((__STATE__) == RCC_LSE_BYPASS) \
+ { \
+ SET_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \
+ SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); \
+ } \
+ else \
+ { \
+ CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON); \
+ CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \
+ } \
+ }while(0U)
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_HSI14_Configuration RCC_HSI14_Configuration
+ * @{
+ */
+
+/** @brief Macro to enable the Internal 14Mhz High Speed oscillator (HSI14).
+ * @note After enabling the HSI14 with @ref __HAL_RCC_HSI14_ENABLE(), the application software
+ * should wait on HSI14RDY flag to be set indicating that HSI clock is stable and can be
+ * used as system clock source. This is not necessary if @ref HAL_RCC_OscConfig() is used.
+ * clock cycles.
+ */
+#define __HAL_RCC_HSI14_ENABLE() SET_BIT(RCC->CR2, RCC_CR2_HSI14ON)
+
+/** @brief Macro to disable the Internal 14Mhz High Speed oscillator (HSI14).
+ * @note The HSI14 is stopped by hardware when entering STOP and STANDBY modes.
+ * @note HSI14 can not be stopped if it is used as system clock source. In this case,
+ * you have to select another source of the system clock then stop the HSI14.
+ * @note When the HSI14 is stopped, HSI14RDY flag goes low after 6 HSI14 oscillator
+ * clock cycles.
+ */
+#define __HAL_RCC_HSI14_DISABLE() CLEAR_BIT(RCC->CR2, RCC_CR2_HSI14ON)
+
+/** @brief Macro to enable the Internal 14Mhz High Speed oscillator (HSI14) used by ADC.
+ */
+#define __HAL_RCC_HSI14ADC_ENABLE() CLEAR_BIT(RCC->CR2, RCC_CR2_HSI14DIS)
+
+/** @brief Macro to disable the Internal 14Mhz High Speed oscillator (HSI14) used by ADC.
+ */
+#define __HAL_RCC_HSI14ADC_DISABLE() SET_BIT(RCC->CR2, RCC_CR2_HSI14DIS)
+
+/** @brief Macro to adjust the Internal 14Mhz High Speed oscillator (HSI) calibration value.
+ * @note The calibration is used to compensate for the variations in voltage
+ * and temperature that influence the frequency of the internal HSI14 RC.
+ * @param __HSI14CALIBRATIONVALUE__ specifies the calibration trimming value
+ * (default is RCC_HSI14CALIBRATION_DEFAULT).
+ * This parameter must be a number between 0 and 0x1F.
+ */
+#define __HAL_RCC_HSI14_CALIBRATIONVALUE_ADJUST(__HSI14CALIBRATIONVALUE__) \
+ MODIFY_REG(RCC->CR2, RCC_CR2_HSI14TRIM, (uint32_t)(__HSI14CALIBRATIONVALUE__) << RCC_HSI14TRIM_BIT_NUMBER)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_USARTx_Clock_Config RCC USARTx Clock Config
+ * @{
+ */
+
+/** @brief Macro to configure the USART1 clock (USART1CLK).
+ * @param __USART1CLKSOURCE__ specifies the USART1 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_USART1CLKSOURCE_PCLK1 PCLK1 selected as USART1 clock
+ * @arg @ref RCC_USART1CLKSOURCE_HSI HSI selected as USART1 clock
+ * @arg @ref RCC_USART1CLKSOURCE_SYSCLK System Clock selected as USART1 clock
+ * @arg @ref RCC_USART1CLKSOURCE_LSE LSE selected as USART1 clock
+ */
+#define __HAL_RCC_USART1_CONFIG(__USART1CLKSOURCE__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_USART1SW, (uint32_t)(__USART1CLKSOURCE__))
+
+/** @brief Macro to get the USART1 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_USART1CLKSOURCE_PCLK1 PCLK1 selected as USART1 clock
+ * @arg @ref RCC_USART1CLKSOURCE_HSI HSI selected as USART1 clock
+ * @arg @ref RCC_USART1CLKSOURCE_SYSCLK System Clock selected as USART1 clock
+ * @arg @ref RCC_USART1CLKSOURCE_LSE LSE selected as USART1 clock
+ */
+#define __HAL_RCC_GET_USART1_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_USART1SW)))
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_I2Cx_Clock_Config RCC I2Cx Clock Config
+ * @{
+ */
+
+/** @brief Macro to configure the I2C1 clock (I2C1CLK).
+ * @param __I2C1CLKSOURCE__ specifies the I2C1 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_I2C1CLKSOURCE_HSI HSI selected as I2C1 clock
+ * @arg @ref RCC_I2C1CLKSOURCE_SYSCLK System Clock selected as I2C1 clock
+ */
+#define __HAL_RCC_I2C1_CONFIG(__I2C1CLKSOURCE__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_I2C1SW, (uint32_t)(__I2C1CLKSOURCE__))
+
+/** @brief Macro to get the I2C1 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_I2C1CLKSOURCE_HSI HSI selected as I2C1 clock
+ * @arg @ref RCC_I2C1CLKSOURCE_SYSCLK System Clock selected as I2C1 clock
+ */
+#define __HAL_RCC_GET_I2C1_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_I2C1SW)))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_PLL_Configuration PLL Configuration
+ * @{
+ */
+
+/** @brief Macro to enable the main PLL.
+ * @note After enabling the main PLL, the application software should wait on
+ * PLLRDY flag to be set indicating that PLL clock is stable and can
+ * be used as system clock source.
+ * @note The main PLL is disabled by hardware when entering STOP and STANDBY modes.
+ */
+#define __HAL_RCC_PLL_ENABLE() SET_BIT(RCC->CR, RCC_CR_PLLON)
+
+/** @brief Macro to disable the main PLL.
+ * @note The main PLL can not be disabled if it is used as system clock source
+ */
+#define __HAL_RCC_PLL_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_PLLON)
+
+/** @brief Macro to configure the PLL clock source, multiplication and division factors.
+ * @note This function must be used only when the main PLL is disabled.
+ *
+ * @param __RCC_PLLSOURCE__ specifies the PLL entry clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_PLLSOURCE_HSI HSI oscillator clock selected as PLL clock entry
+ * @arg @ref RCC_PLLSOURCE_HSE HSE oscillator clock selected as PLL clock entry
+ * @param __PLLMUL__ specifies the multiplication factor for PLL VCO output clock
+ * This parameter can be one of the following values:
+ * This parameter must be a number between RCC_PLL_MUL2 and RCC_PLL_MUL16.
+ * @param __PREDIV__ specifies the predivider factor for PLL VCO input clock
+ * This parameter must be a number between RCC_PREDIV_DIV1 and RCC_PREDIV_DIV16.
+ *
+ */
+#define __HAL_RCC_PLL_CONFIG(__RCC_PLLSOURCE__ , __PREDIV__, __PLLMUL__) \
+ do { \
+ MODIFY_REG(RCC->CFGR2, RCC_CFGR2_PREDIV, (__PREDIV__)); \
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_PLLMUL | RCC_CFGR_PLLSRC, (uint32_t)((__PLLMUL__)|(__RCC_PLLSOURCE__))); \
+ } while(0U)
+
+
+/** @brief Get oscillator clock selected as PLL input clock
+ * @retval The clock source used for PLL entry. The returned value can be one
+ * of the following:
+ * @arg @ref RCC_PLLSOURCE_HSE HSE oscillator clock selected as PLL input clock
+ */
+#define __HAL_RCC_GET_PLL_OSCSOURCE() ((uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_PLLSRC)))
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Get_Clock_source Get Clock source
+ * @{
+ */
+
+/**
+ * @brief Macro to configure the system clock source.
+ * @param __SYSCLKSOURCE__ specifies the system clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_SYSCLKSOURCE_HSI HSI oscillator is used as system clock source.
+ * @arg @ref RCC_SYSCLKSOURCE_HSE HSE oscillator is used as system clock source.
+ * @arg @ref RCC_SYSCLKSOURCE_PLLCLK PLL output is used as system clock source.
+ */
+#define __HAL_RCC_SYSCLK_CONFIG(__SYSCLKSOURCE__) \
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_SW, (__SYSCLKSOURCE__))
+
+/** @brief Macro to get the clock source used as system clock.
+ * @retval The clock source used as system clock. The returned value can be one
+ * of the following:
+ * @arg @ref RCC_SYSCLKSOURCE_STATUS_HSI HSI used as system clock
+ * @arg @ref RCC_SYSCLKSOURCE_STATUS_HSE HSE used as system clock
+ * @arg @ref RCC_SYSCLKSOURCE_STATUS_PLLCLK PLL used as system clock
+ */
+#define __HAL_RCC_GET_SYSCLK_SOURCE() ((uint32_t)(RCC->CFGR & RCC_CFGR_SWS))
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_MCOx_Clock_Config RCC Extended MCOx Clock Config
+ * @{
+ */
+
+#if defined(RCC_CFGR_MCOPRE)
+/** @brief Macro to configure the MCO clock.
+ * @param __MCOCLKSOURCE__ specifies the MCO clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_MCO1SOURCE_NOCLOCK No clock selected as MCO clock
+ * @arg @ref RCC_MCO1SOURCE_SYSCLK System Clock selected as MCO clock
+ * @arg @ref RCC_MCO1SOURCE_HSI HSI oscillator clock selected as MCO clock
+ * @arg @ref RCC_MCO1SOURCE_HSE HSE selected as MCO clock
+ * @arg @ref RCC_MCO1SOURCE_LSI LSI selected as MCO clock
+ * @arg @ref RCC_MCO1SOURCE_LSE LSE selected as MCO clock
+ * @arg @ref RCC_MCO1SOURCE_HSI14 HSI14 selected as MCO clock
+ @if STM32F042x6
+ * @arg @ref RCC_MCO1SOURCE_HSI48 HSI48 selected as MCO clock
+ * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock
+ @elseif STM32F048xx
+ * @arg @ref RCC_MCO1SOURCE_HSI48 HSI48 selected as MCO clock
+ * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock
+ @elseif STM32F071xB
+ * @arg @ref RCC_MCO1SOURCE_HSI48 HSI48 selected as MCO clock
+ * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock
+ @elseif STM32F072xB
+ * @arg @ref RCC_MCO1SOURCE_HSI48 HSI48 selected as MCO clock
+ * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock
+ @elseif STM32F078xx
+ * @arg @ref RCC_MCO1SOURCE_HSI48 HSI48 selected as MCO clock
+ * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock
+ @elseif STM32F091xC
+ * @arg @ref RCC_MCO1SOURCE_HSI48 HSI48 selected as MCO clock
+ * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock
+ @elseif STM32F098xx
+ * @arg @ref RCC_MCO1SOURCE_HSI48 HSI48 selected as MCO clock
+ * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock
+ @elseif STM32F030x6
+ * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock
+ @elseif STM32F030xC
+ * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock
+ @elseif STM32F031x6
+ * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock
+ @elseif STM32F038xx
+ * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock
+ @elseif STM32F070x6
+ * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock
+ @elseif STM32F070xB
+ * @arg @ref RCC_MCO1SOURCE_PLLCLK PLLCLK selected as MCO clock
+ @endif
+ * @arg @ref RCC_MCO1SOURCE_PLLCLK_DIV2 PLLCLK Divided by 2 selected as MCO clock
+ * @param __MCODIV__ specifies the MCO clock prescaler.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_MCODIV_1 MCO clock source is divided by 1
+ * @arg @ref RCC_MCODIV_2 MCO clock source is divided by 2
+ * @arg @ref RCC_MCODIV_4 MCO clock source is divided by 4
+ * @arg @ref RCC_MCODIV_8 MCO clock source is divided by 8
+ * @arg @ref RCC_MCODIV_16 MCO clock source is divided by 16
+ * @arg @ref RCC_MCODIV_32 MCO clock source is divided by 32
+ * @arg @ref RCC_MCODIV_64 MCO clock source is divided by 64
+ * @arg @ref RCC_MCODIV_128 MCO clock source is divided by 128
+ */
+#else
+/** @brief Macro to configure the MCO clock.
+ * @param __MCOCLKSOURCE__ specifies the MCO clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_MCO1SOURCE_NOCLOCK No clock selected as MCO clock
+ * @arg @ref RCC_MCO1SOURCE_SYSCLK System Clock selected as MCO clock
+ * @arg @ref RCC_MCO1SOURCE_HSI HSI selected as MCO clock
+ * @arg @ref RCC_MCO1SOURCE_HSE HSE selected as MCO clock
+ * @arg @ref RCC_MCO1SOURCE_LSI LSI selected as MCO clock
+ * @arg @ref RCC_MCO1SOURCE_LSE LSE selected as MCO clock
+ * @arg @ref RCC_MCO1SOURCE_HSI14 HSI14 selected as MCO clock
+ * @arg @ref RCC_MCO1SOURCE_PLLCLK_DIV2 PLLCLK Divided by 2 selected as MCO clock
+ * @param __MCODIV__ specifies the MCO clock prescaler.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_MCODIV_1 No division applied on MCO clock source
+ */
+#endif
+#if defined(RCC_CFGR_MCOPRE)
+#define __HAL_RCC_MCO1_CONFIG(__MCOCLKSOURCE__, __MCODIV__) \
+ MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO | RCC_CFGR_MCOPRE), ((__MCOCLKSOURCE__) | (__MCODIV__)))
+#else
+
+#define __HAL_RCC_MCO1_CONFIG(__MCOCLKSOURCE__, __MCODIV__) \
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_MCO, (__MCOCLKSOURCE__))
+
+#endif
+
+/**
+ * @}
+ */
+
+ /** @defgroup RCC_RTC_Clock_Configuration RCC RTC Clock Configuration
+ * @{
+ */
+
+/** @brief Macro to configure the RTC clock (RTCCLK).
+ * @note As the RTC clock configuration bits are in the Backup domain and write
+ * access is denied to this domain after reset, you have to enable write
+ * access using the Power Backup Access macro before to configure
+ * the RTC clock source (to be done once after reset).
+ * @note Once the RTC clock is configured it cannot be changed unless the
+ * Backup domain is reset using @ref __HAL_RCC_BACKUPRESET_FORCE() macro, or by
+ * a Power On Reset (POR).
+ *
+ * @param __RTC_CLKSOURCE__ specifies the RTC clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_RTCCLKSOURCE_NO_CLK No clock selected as RTC clock
+ * @arg @ref RCC_RTCCLKSOURCE_LSE LSE selected as RTC clock
+ * @arg @ref RCC_RTCCLKSOURCE_LSI LSI selected as RTC clock
+ * @arg @ref RCC_RTCCLKSOURCE_HSE_DIV32 HSE clock divided by 32
+ * @note If the LSE or LSI is used as RTC clock source, the RTC continues to
+ * work in STOP and STANDBY modes, and can be used as wakeup source.
+ * However, when the LSI clock and HSE clock divided by 32 is used as RTC clock source,
+ * the RTC cannot be used in STOP and STANDBY modes.
+ * @note The system must always be configured so as to get a PCLK frequency greater than or
+ * equal to the RTCCLK frequency for a proper operation of the RTC.
+ */
+#define __HAL_RCC_RTC_CONFIG(__RTC_CLKSOURCE__) MODIFY_REG(RCC->BDCR, RCC_BDCR_RTCSEL, (__RTC_CLKSOURCE__))
+
+/** @brief Macro to get the RTC clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_RTCCLKSOURCE_NO_CLK No clock selected as RTC clock
+ * @arg @ref RCC_RTCCLKSOURCE_LSE LSE selected as RTC clock
+ * @arg @ref RCC_RTCCLKSOURCE_LSI LSI selected as RTC clock
+ * @arg @ref RCC_RTCCLKSOURCE_HSE_DIV32 HSE clock divided by 32
+ */
+#define __HAL_RCC_GET_RTC_SOURCE() (READ_BIT(RCC->BDCR, RCC_BDCR_RTCSEL))
+
+/** @brief Macro to enable the the RTC clock.
+ * @note These macros must be used only after the RTC clock source was selected.
+ */
+#define __HAL_RCC_RTC_ENABLE() SET_BIT(RCC->BDCR, RCC_BDCR_RTCEN)
+
+/** @brief Macro to disable the the RTC clock.
+ * @note These macros must be used only after the RTC clock source was selected.
+ */
+#define __HAL_RCC_RTC_DISABLE() CLEAR_BIT(RCC->BDCR, RCC_BDCR_RTCEN)
+
+/** @brief Macro to force the Backup domain reset.
+ * @note This function resets the RTC peripheral (including the backup registers)
+ * and the RTC clock source selection in RCC_BDCR register.
+ */
+#define __HAL_RCC_BACKUPRESET_FORCE() SET_BIT(RCC->BDCR, RCC_BDCR_BDRST)
+
+/** @brief Macros to release the Backup domain reset.
+ */
+#define __HAL_RCC_BACKUPRESET_RELEASE() CLEAR_BIT(RCC->BDCR, RCC_BDCR_BDRST)
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Flags_Interrupts_Management Flags Interrupts Management
+ * @brief macros to manage the specified RCC Flags and interrupts.
+ * @{
+ */
+
+/** @brief Enable RCC interrupt.
+ * @param __INTERRUPT__ specifies the RCC interrupt sources to be enabled.
+ * This parameter can be any combination of the following values:
+ * @arg @ref RCC_IT_LSIRDY LSI ready interrupt
+ * @arg @ref RCC_IT_LSERDY LSE ready interrupt
+ * @arg @ref RCC_IT_HSIRDY HSI ready interrupt
+ * @arg @ref RCC_IT_HSERDY HSE ready interrupt
+ * @arg @ref RCC_IT_PLLRDY main PLL ready interrupt
+ * @arg @ref RCC_IT_HSI14RDY HSI14 ready interrupt
+ @if STM32F042x6
+ * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt
+ @elseif STM32F048xx
+ * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt
+ @elseif STM32F071xB
+ * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt
+ @elseif STM32F072xB
+ * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt
+ @elseif STM32F078xx
+ * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt
+ @elseif STM32F091xC
+ * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt
+ @elseif STM32F098xx
+ * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt
+ @endif
+ */
+#define __HAL_RCC_ENABLE_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE1_ADDRESS |= (__INTERRUPT__))
+
+/** @brief Disable RCC interrupt.
+ * @param __INTERRUPT__ specifies the RCC interrupt sources to be disabled.
+ * This parameter can be any combination of the following values:
+ * @arg @ref RCC_IT_LSIRDY LSI ready interrupt
+ * @arg @ref RCC_IT_LSERDY LSE ready interrupt
+ * @arg @ref RCC_IT_HSIRDY HSI ready interrupt
+ * @arg @ref RCC_IT_HSERDY HSE ready interrupt
+ * @arg @ref RCC_IT_PLLRDY main PLL ready interrupt
+ * @arg @ref RCC_IT_HSI14RDY HSI14 ready interrupt
+ @if STM32F042x6
+ * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt
+ @elseif STM32F048xx
+ * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt
+ @elseif STM32F071xB
+ * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt
+ @elseif STM32F072xB
+ * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt
+ @elseif STM32F078xx
+ * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt
+ @elseif STM32F091xC
+ * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt
+ @elseif STM32F098xx
+ * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt
+ @endif
+ */
+#define __HAL_RCC_DISABLE_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE1_ADDRESS &= (uint8_t)(~(__INTERRUPT__)))
+
+/** @brief Clear the RCC's interrupt pending bits.
+ * @param __INTERRUPT__ specifies the interrupt pending bit to clear.
+ * This parameter can be any combination of the following values:
+ * @arg @ref RCC_IT_LSIRDY LSI ready interrupt.
+ * @arg @ref RCC_IT_LSERDY LSE ready interrupt.
+ * @arg @ref RCC_IT_HSIRDY HSI ready interrupt.
+ * @arg @ref RCC_IT_HSERDY HSE ready interrupt.
+ * @arg @ref RCC_IT_PLLRDY Main PLL ready interrupt.
+ * @arg @ref RCC_IT_CSS Clock Security System interrupt
+ * @arg @ref RCC_IT_HSI14RDY HSI14 ready interrupt
+ @if STM32F042x6
+ * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt
+ @elseif STM32F048xx
+ * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt
+ @elseif STM32F071xB
+ * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt
+ @elseif STM32F072xB
+ * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt
+ @elseif STM32F078xx
+ * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt
+ @elseif STM32F091xC
+ * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt
+ @elseif STM32F098xx
+ * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt
+ @endif
+ */
+#define __HAL_RCC_CLEAR_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE2_ADDRESS = (__INTERRUPT__))
+
+/** @brief Check the RCC's interrupt has occurred or not.
+ * @param __INTERRUPT__ specifies the RCC interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_IT_LSIRDY LSI ready interrupt.
+ * @arg @ref RCC_IT_LSERDY LSE ready interrupt.
+ * @arg @ref RCC_IT_HSIRDY HSI ready interrupt.
+ * @arg @ref RCC_IT_HSERDY HSE ready interrupt.
+ * @arg @ref RCC_IT_PLLRDY Main PLL ready interrupt.
+ * @arg @ref RCC_IT_CSS Clock Security System interrupt
+ * @arg @ref RCC_IT_HSI14RDY HSI14 ready interrupt enable
+ @if STM32F042x6
+ * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt
+ @elseif STM32F048xx
+ * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt
+ @elseif STM32F071xB
+ * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt
+ @elseif STM32F072xB
+ * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt
+ @elseif STM32F078xx
+ * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt
+ @elseif STM32F091xC
+ * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt
+ @elseif STM32F098xx
+ * @arg @ref RCC_IT_HSI48RDY HSI48 ready interrupt
+ @endif
+ * @retval The new state of __INTERRUPT__ (TRUE or FALSE).
+ */
+#define __HAL_RCC_GET_IT(__INTERRUPT__) ((RCC->CIR & (__INTERRUPT__)) == (__INTERRUPT__))
+
+/** @brief Set RMVF bit to clear the reset flags.
+ * The reset flags are RCC_FLAG_PINRST, RCC_FLAG_PORRST, RCC_FLAG_SFTRST,
+ * RCC_FLAG_OBLRST, RCC_FLAG_IWDGRST, RCC_FLAG_WWDGRST, RCC_FLAG_LPWRRST
+ */
+#define __HAL_RCC_CLEAR_RESET_FLAGS() (RCC->CSR |= RCC_CSR_RMVF)
+
+/** @brief Check RCC flag is set or not.
+ * @param __FLAG__ specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_FLAG_HSIRDY HSI oscillator clock ready.
+ * @arg @ref RCC_FLAG_HSERDY HSE oscillator clock ready.
+ * @arg @ref RCC_FLAG_PLLRDY Main PLL clock ready.
+ * @arg @ref RCC_FLAG_HSI14RDY HSI14 oscillator clock ready
+ @if STM32F038xx
+ * @arg @ref RCC_FLAG_V18PWRRST Reset flag of the 1.8 V domain
+ @elseif STM32F042x6
+ * @arg @ref RCC_FLAG_HSI48RDY HSI48 oscillator clock ready
+ @elseif STM32F048xx
+ * @arg @ref RCC_FLAG_HSI48RDY HSI48 oscillator clock ready
+ * @arg @ref RCC_FLAG_V18PWRRST Reset flag of the 1.8 V domain
+ @elseif STM32F058xx
+ * @arg @ref RCC_FLAG_V18PWRRST Reset flag of the 1.8 V domain
+ @elseif STM32F071xB
+ * @arg @ref RCC_FLAG_HSI48RDY HSI48 oscillator clock ready
+ @elseif STM32F072xB
+ * @arg @ref RCC_FLAG_HSI48RDY HSI48 oscillator clock ready
+ @elseif STM32F078xx
+ * @arg @ref RCC_FLAG_HSI48RDY HSI48 oscillator clock ready
+ * @arg @ref RCC_FLAG_V18PWRRST Reset flag of the 1.8 V domain
+ @elseif STM32F091xC
+ * @arg @ref RCC_FLAG_HSI48RDY HSI48 oscillator clock ready
+ @elseif STM32F098xx
+ * @arg @ref RCC_FLAG_HSI48RDY HSI48 oscillator clock ready
+ * @arg @ref RCC_FLAG_V18PWRRST Reset flag of the 1.8 V domain
+ @endif
+ * @arg @ref RCC_FLAG_LSERDY LSE oscillator clock ready.
+ * @arg @ref RCC_FLAG_LSIRDY LSI oscillator clock ready.
+ * @arg @ref RCC_FLAG_OBLRST Option Byte Load reset
+ * @arg @ref RCC_FLAG_PINRST Pin reset.
+ * @arg @ref RCC_FLAG_PORRST POR/PDR reset.
+ * @arg @ref RCC_FLAG_SFTRST Software reset.
+ * @arg @ref RCC_FLAG_IWDGRST Independent Watchdog reset.
+ * @arg @ref RCC_FLAG_WWDGRST Window Watchdog reset.
+ * @arg @ref RCC_FLAG_LPWRRST Low Power reset.
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_RCC_GET_FLAG(__FLAG__) (((((__FLAG__) >> 5U) == CR_REG_INDEX)? RCC->CR : \
+ (((__FLAG__) >> 5U) == CR2_REG_INDEX)? RCC->CR2 : \
+ (((__FLAG__) >> 5U) == BDCR_REG_INDEX) ? RCC->BDCR : \
+ RCC->CSR) & (1U << ((__FLAG__) & RCC_FLAG_MASK)))
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Include RCC HAL Extension module */
+#include "stm32f0xx_hal_rcc_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup RCC_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup RCC_Exported_Functions_Group1
+ * @{
+ */
+
+/* Initialization and de-initialization functions ******************************/
+HAL_StatusTypeDef HAL_RCC_DeInit(void);
+HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct);
+HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency);
+
+/**
+ * @}
+ */
+
+/** @addtogroup RCC_Exported_Functions_Group2
+ * @{
+ */
+
+/* Peripheral Control functions ************************************************/
+void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv);
+void HAL_RCC_EnableCSS(void);
+/* CSS NMI IRQ handler */
+void HAL_RCC_NMI_IRQHandler(void);
+/* User Callbacks in non blocking mode (IT mode) */
+void HAL_RCC_CSSCallback(void);
+void HAL_RCC_DisableCSS(void);
+uint32_t HAL_RCC_GetSysClockFreq(void);
+uint32_t HAL_RCC_GetHCLKFreq(void);
+uint32_t HAL_RCC_GetPCLK1Freq(void);
+void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct);
+void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_RCC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h
new file mode 100644
index 0000000..0062222
--- /dev/null
+++ b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h
@@ -0,0 +1,2085 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_rcc_ex.h
+ * @author MCD Application Team
+ * @brief Header file of RCC HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_RCC_EX_H
+#define __STM32F0xx_HAL_RCC_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup RCC
+ * @{
+ */
+
+/** @addtogroup RCC_Private_Macros
+ * @{
+ */
+#if defined(RCC_HSI48_SUPPORT)
+#define IS_RCC_OSCILLATORTYPE(OSCILLATOR) (((OSCILLATOR) == RCC_OSCILLATORTYPE_NONE) || \
+ (((OSCILLATOR) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE) || \
+ (((OSCILLATOR) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI) || \
+ (((OSCILLATOR) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI) || \
+ (((OSCILLATOR) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE) || \
+ (((OSCILLATOR) & RCC_OSCILLATORTYPE_HSI14) == RCC_OSCILLATORTYPE_HSI14) || \
+ (((OSCILLATOR) & RCC_OSCILLATORTYPE_HSI48) == RCC_OSCILLATORTYPE_HSI48))
+
+#define IS_RCC_SYSCLKSOURCE(SOURCE) (((SOURCE) == RCC_SYSCLKSOURCE_HSI) || \
+ ((SOURCE) == RCC_SYSCLKSOURCE_HSE) || \
+ ((SOURCE) == RCC_SYSCLKSOURCE_PLLCLK) || \
+ ((SOURCE) == RCC_SYSCLKSOURCE_HSI48))
+
+#define IS_RCC_SYSCLKSOURCE_STATUS(SOURCE) (((SOURCE) == RCC_SYSCLKSOURCE_STATUS_HSI) || \
+ ((SOURCE) == RCC_SYSCLKSOURCE_STATUS_HSE) || \
+ ((SOURCE) == RCC_SYSCLKSOURCE_STATUS_PLLCLK) || \
+ ((SOURCE) == RCC_SYSCLKSOURCE_STATUS_HSI48))
+
+#define IS_RCC_PLLSOURCE(SOURCE) (((SOURCE) == RCC_PLLSOURCE_HSI) || \
+ ((SOURCE) == RCC_PLLSOURCE_HSI48) || \
+ ((SOURCE) == RCC_PLLSOURCE_HSE))
+
+#define IS_RCC_HSI48(HSI48) (((HSI48) == RCC_HSI48_OFF) || ((HSI48) == RCC_HSI48_ON))
+
+#else
+
+#define IS_RCC_OSCILLATORTYPE(OSCILLATOR) (((OSCILLATOR) == RCC_OSCILLATORTYPE_NONE) || \
+ (((OSCILLATOR) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE) || \
+ (((OSCILLATOR) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI) || \
+ (((OSCILLATOR) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI) || \
+ (((OSCILLATOR) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE) || \
+ (((OSCILLATOR) & RCC_OSCILLATORTYPE_HSI14) == RCC_OSCILLATORTYPE_HSI14))
+#define IS_RCC_SYSCLKSOURCE(SOURCE) (((SOURCE) == RCC_SYSCLKSOURCE_HSI) || \
+ ((SOURCE) == RCC_SYSCLKSOURCE_HSE) || \
+ ((SOURCE) == RCC_SYSCLKSOURCE_PLLCLK))
+
+#define IS_RCC_SYSCLKSOURCE_STATUS(SOURCE) (((SOURCE) == RCC_SYSCLKSOURCE_STATUS_HSI) || \
+ ((SOURCE) == RCC_SYSCLKSOURCE_STATUS_HSE) || \
+ ((SOURCE) == RCC_SYSCLKSOURCE_STATUS_PLLCLK))
+#define IS_RCC_PLLSOURCE(SOURCE) (((SOURCE) == RCC_PLLSOURCE_HSI) || \
+ ((SOURCE) == RCC_PLLSOURCE_HSE))
+
+#endif /* RCC_HSI48_SUPPORT */
+
+#if defined(RCC_CFGR_PLLNODIV) && !defined(RCC_CFGR_MCO_HSI48)
+
+#define IS_RCC_MCO1SOURCE(SOURCE) (((SOURCE) == RCC_MCO1SOURCE_NOCLOCK) || \
+ ((SOURCE) == RCC_MCO1SOURCE_LSI) || \
+ ((SOURCE) == RCC_MCO1SOURCE_LSE) || \
+ ((SOURCE) == RCC_MCO1SOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_MCO1SOURCE_HSI) || \
+ ((SOURCE) == RCC_MCO1SOURCE_HSE) || \
+ ((SOURCE) == RCC_MCO1SOURCE_PLLCLK) || \
+ ((SOURCE) == RCC_MCO1SOURCE_PLLCLK_DIV2) || \
+ ((SOURCE) == RCC_MCO1SOURCE_HSI14))
+
+#elif defined(RCC_CFGR_PLLNODIV) && defined(RCC_CFGR_MCO_HSI48)
+
+#define IS_RCC_MCO1SOURCE(SOURCE) (((SOURCE) == RCC_MCO1SOURCE_NOCLOCK) || \
+ ((SOURCE) == RCC_MCO1SOURCE_LSI) || \
+ ((SOURCE) == RCC_MCO1SOURCE_LSE) || \
+ ((SOURCE) == RCC_MCO1SOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_MCO1SOURCE_HSI) || \
+ ((SOURCE) == RCC_MCO1SOURCE_HSE) || \
+ ((SOURCE) == RCC_MCO1SOURCE_PLLCLK) || \
+ ((SOURCE) == RCC_MCO1SOURCE_PLLCLK_DIV2) || \
+ ((SOURCE) == RCC_MCO1SOURCE_HSI14) || \
+ ((SOURCE) == RCC_MCO1SOURCE_HSI48))
+
+#elif !defined(RCC_CFGR_PLLNODIV) && !defined(RCC_CFGR_MCO_HSI48)
+
+#define IS_RCC_MCO1SOURCE(SOURCE) (((SOURCE) == RCC_MCO1SOURCE_NOCLOCK) || \
+ ((SOURCE) == RCC_MCO1SOURCE_LSI) || \
+ ((SOURCE) == RCC_MCO1SOURCE_LSE) || \
+ ((SOURCE) == RCC_MCO1SOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_MCO1SOURCE_HSI) || \
+ ((SOURCE) == RCC_MCO1SOURCE_HSE) || \
+ ((SOURCE) == RCC_MCO1SOURCE_PLLCLK_DIV2) || \
+ ((SOURCE) == RCC_MCO1SOURCE_HSI14))
+
+#endif /* RCC_CFGR_PLLNODIV && !RCC_CFGR_MCO_HSI48 */
+
+/**
+ * @}
+ */
+
+/** @addtogroup RCC_Exported_Constants
+ * @{
+ */
+#if defined(RCC_HSI48_SUPPORT)
+
+/** @addtogroup RCC_PLL_Clock_Source
+ * @{
+ */
+#define RCC_PLLSOURCE_HSI RCC_CFGR_PLLSRC_HSI_PREDIV
+#define RCC_PLLSOURCE_HSI48 RCC_CFGR_PLLSRC_HSI48_PREDIV
+
+/**
+ * @}
+ */
+
+/** @addtogroup RCC_Interrupt
+ * @{
+ */
+#define RCC_IT_HSI48 RCC_CIR_HSI48RDYF /*!< HSI48 Ready Interrupt flag */
+/**
+ * @}
+ */
+
+/** @addtogroup RCC_Flag
+ * @{
+ */
+#define RCC_FLAG_HSI48RDY ((uint8_t)((CR2_REG_INDEX << 5U) | RCC_CR2_HSI48RDY_BitNumber))
+/**
+ * @}
+ */
+
+/** @addtogroup RCC_System_Clock_Source
+ * @{
+ */
+#define RCC_SYSCLKSOURCE_HSI48 RCC_CFGR_SW_HSI48
+/**
+ * @}
+ */
+
+/** @addtogroup RCC_System_Clock_Source_Status
+ * @{
+ */
+#define RCC_SYSCLKSOURCE_STATUS_HSI48 RCC_CFGR_SWS_HSI48
+/**
+ * @}
+ */
+
+#else
+/** @addtogroup RCC_PLL_Clock_Source
+ * @{
+ */
+
+#if defined(STM32F070xB) || defined(STM32F070x6) || defined(STM32F030xC)
+#define RCC_PLLSOURCE_HSI RCC_CFGR_PLLSRC_HSI_PREDIV
+#else
+#define RCC_PLLSOURCE_HSI RCC_CFGR_PLLSRC_HSI_DIV2
+#endif
+
+/**
+ * @}
+ */
+
+#endif /* RCC_HSI48_SUPPORT */
+
+/** @addtogroup RCC_MCO_Clock_Source
+ * @{
+ */
+
+#if defined(RCC_CFGR_PLLNODIV)
+
+#define RCC_MCO1SOURCE_PLLCLK (RCC_CFGR_MCO_PLL | RCC_CFGR_PLLNODIV)
+
+#endif /* RCC_CFGR_PLLNODIV */
+
+#if defined(RCC_CFGR_MCO_HSI48)
+
+#define RCC_MCO1SOURCE_HSI48 RCC_CFGR_MCO_HSI48
+
+#endif /* SRCC_CFGR_MCO_HSI48 */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup RCCEx
+ * @{
+ */
+
+/* Private Constants -------------------------------------------------------------*/
+#if defined(CRS)
+/** @addtogroup RCCEx_Private_Constants
+ * @{
+ */
+
+/* CRS IT Error Mask */
+#define RCC_CRS_IT_ERROR_MASK ((uint32_t)(RCC_CRS_IT_TRIMOVF | RCC_CRS_IT_SYNCERR | RCC_CRS_IT_SYNCMISS))
+
+/* CRS Flag Error Mask */
+#define RCC_CRS_FLAG_ERROR_MASK ((uint32_t)(RCC_CRS_FLAG_TRIMOVF | RCC_CRS_FLAG_SYNCERR | RCC_CRS_FLAG_SYNCMISS))
+
+/**
+ * @}
+ */
+#endif /* CRS */
+
+/* Private macro -------------------------------------------------------------*/
+/** @defgroup RCCEx_Private_Macros RCCEx Private Macros
+ * @{
+ */
+#if defined(STM32F030x6) || defined(STM32F030x8) || defined(STM32F031x6) || defined(STM32F038xx)\
+ || defined(STM32F030xC)
+
+#define IS_RCC_PERIPHCLOCK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_I2C1 | \
+ RCC_PERIPHCLK_RTC))
+#endif /* STM32F030x6 || STM32F030x8 || STM32F031x6 || STM32F038xx ||
+ STM32F030xC */
+
+#if defined(STM32F070x6) || defined(STM32F070xB)
+
+#define IS_RCC_PERIPHCLOCK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_I2C1 | \
+ RCC_PERIPHCLK_RTC | RCC_PERIPHCLK_USB))
+#endif /* STM32F070x6 || STM32F070xB */
+
+#if defined(STM32F042x6) || defined(STM32F048xx)
+
+#define IS_RCC_PERIPHCLOCK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_I2C1 | \
+ RCC_PERIPHCLK_CEC | RCC_PERIPHCLK_RTC | \
+ RCC_PERIPHCLK_USB))
+#endif /* STM32F042x6 || STM32F048xx */
+
+#if defined(STM32F051x8) || defined(STM32F058xx)
+
+#define IS_RCC_PERIPHCLOCK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_I2C1 | \
+ RCC_PERIPHCLK_CEC | RCC_PERIPHCLK_RTC))
+#endif /* STM32F051x8 || STM32F058xx */
+
+#if defined(STM32F071xB)
+
+#define IS_RCC_PERIPHCLOCK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_CEC | \
+ RCC_PERIPHCLK_RTC))
+#endif /* STM32F071xB */
+
+#if defined(STM32F072xB) || defined(STM32F078xx)
+
+#define IS_RCC_PERIPHCLOCK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_CEC | \
+ RCC_PERIPHCLK_RTC | RCC_PERIPHCLK_USB))
+#endif /* STM32F072xB || STM32F078xx */
+
+#if defined(STM32F091xC) || defined(STM32F098xx)
+
+#define IS_RCC_PERIPHCLOCK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_CEC | \
+ RCC_PERIPHCLK_RTC | RCC_PERIPHCLK_USART3 ))
+#endif /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB) || defined(STM32F078xx)
+
+#define IS_RCC_USBCLKSOURCE(SOURCE) (((SOURCE) == RCC_USBCLKSOURCE_HSI48) || \
+ ((SOURCE) == RCC_USBCLKSOURCE_PLL))
+
+#endif /* STM32F042x6 || STM32F048xx || STM32F072xB || STM32F078xx */
+
+#if defined(STM32F070x6) || defined(STM32F070xB)
+
+#define IS_RCC_USBCLKSOURCE(SOURCE) (((SOURCE) == RCC_USBCLKSOURCE_NONE) || \
+ ((SOURCE) == RCC_USBCLKSOURCE_PLL))
+
+#endif /* STM32F070x6 || STM32F070xB */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\
+ || defined(STM32F091xC) || defined(STM32F098xx)
+
+#define IS_RCC_USART2CLKSOURCE(SOURCE) (((SOURCE) == RCC_USART2CLKSOURCE_PCLK1) || \
+ ((SOURCE) == RCC_USART2CLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_USART2CLKSOURCE_LSE) || \
+ ((SOURCE) == RCC_USART2CLKSOURCE_HSI))
+
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F091xC) || defined(STM32F098xx)
+
+#define IS_RCC_USART3CLKSOURCE(SOURCE) (((SOURCE) == RCC_USART3CLKSOURCE_PCLK1) || \
+ ((SOURCE) == RCC_USART3CLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_USART3CLKSOURCE_LSE) || \
+ ((SOURCE) == RCC_USART3CLKSOURCE_HSI))
+#endif /* STM32F091xC || STM32F098xx */
+
+
+#if defined(STM32F042x6) || defined(STM32F048xx)\
+ || defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\
+ || defined(STM32F091xC) || defined(STM32F098xx)
+
+#define IS_RCC_CECCLKSOURCE(SOURCE) (((SOURCE) == RCC_CECCLKSOURCE_HSI) || \
+ ((SOURCE) == RCC_CECCLKSOURCE_LSE))
+#endif /* STM32F042x6 || STM32F048xx || */
+ /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+#if defined(RCC_CFGR_MCOPRE)
+
+#define IS_RCC_MCODIV(DIV) (((DIV) == RCC_MCODIV_1) || ((DIV) == RCC_MCODIV_2) || \
+ ((DIV) == RCC_MCODIV_4) || ((DIV) == RCC_MCODIV_8) || \
+ ((DIV) == RCC_MCODIV_16) || ((DIV) == RCC_MCODIV_32) || \
+ ((DIV) == RCC_MCODIV_64) || ((DIV) == RCC_MCODIV_128))
+#else
+
+#define IS_RCC_MCODIV(DIV) (((DIV) == RCC_MCODIV_1))
+
+#endif /* RCC_CFGR_MCOPRE */
+
+#define IS_RCC_LSE_DRIVE(__DRIVE__) (((__DRIVE__) == RCC_LSEDRIVE_LOW) || \
+ ((__DRIVE__) == RCC_LSEDRIVE_MEDIUMLOW) || \
+ ((__DRIVE__) == RCC_LSEDRIVE_MEDIUMHIGH) || \
+ ((__DRIVE__) == RCC_LSEDRIVE_HIGH))
+
+#if defined(CRS)
+
+#define IS_RCC_CRS_SYNC_SOURCE(_SOURCE_) (((_SOURCE_) == RCC_CRS_SYNC_SOURCE_GPIO) || \
+ ((_SOURCE_) == RCC_CRS_SYNC_SOURCE_LSE) || \
+ ((_SOURCE_) == RCC_CRS_SYNC_SOURCE_USB))
+#define IS_RCC_CRS_SYNC_DIV(_DIV_) (((_DIV_) == RCC_CRS_SYNC_DIV1) || ((_DIV_) == RCC_CRS_SYNC_DIV2) || \
+ ((_DIV_) == RCC_CRS_SYNC_DIV4) || ((_DIV_) == RCC_CRS_SYNC_DIV8) || \
+ ((_DIV_) == RCC_CRS_SYNC_DIV16) || ((_DIV_) == RCC_CRS_SYNC_DIV32) || \
+ ((_DIV_) == RCC_CRS_SYNC_DIV64) || ((_DIV_) == RCC_CRS_SYNC_DIV128))
+#define IS_RCC_CRS_SYNC_POLARITY(_POLARITY_) (((_POLARITY_) == RCC_CRS_SYNC_POLARITY_RISING) || \
+ ((_POLARITY_) == RCC_CRS_SYNC_POLARITY_FALLING))
+#define IS_RCC_CRS_RELOADVALUE(_VALUE_) (((_VALUE_) <= 0xFFFFU))
+#define IS_RCC_CRS_ERRORLIMIT(_VALUE_) (((_VALUE_) <= 0xFFU))
+#define IS_RCC_CRS_HSI48CALIBRATION(_VALUE_) (((_VALUE_) <= 0x3FU))
+#define IS_RCC_CRS_FREQERRORDIR(_DIR_) (((_DIR_) == RCC_CRS_FREQERRORDIR_UP) || \
+ ((_DIR_) == RCC_CRS_FREQERRORDIR_DOWN))
+#endif /* CRS */
+/**
+ * @}
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup RCCEx_Exported_Types RCCEx Exported Types
+ * @{
+ */
+
+/**
+ * @brief RCC extended clocks structure definition
+ */
+#if defined(STM32F030x6) || defined(STM32F030x8) || defined(STM32F031x6) || defined(STM32F038xx)\
+ || defined(STM32F030xC)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCC_USART1_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F030x6 || STM32F030x8 || STM32F031x6 || STM32F038xx ||
+ STM32F030xC */
+
+#if defined(STM32F070x6) || defined(STM32F070xB)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCC_USART1_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t UsbClockSelection; /*!< USB clock source
+ This parameter can be a value of @ref RCCEx_USB_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F070x6 || STM32F070xB */
+
+#if defined(STM32F042x6) || defined(STM32F048xx)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCC_USART1_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t CecClockSelection; /*!< HDMI CEC clock source
+ This parameter can be a value of @ref RCCEx_CEC_Clock_Source */
+
+ uint32_t UsbClockSelection; /*!< USB clock source
+ This parameter can be a value of @ref RCCEx_USB_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F042x6 || STM32F048xx */
+
+#if defined(STM32F051x8) || defined(STM32F058xx)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCC_USART1_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t CecClockSelection; /*!< HDMI CEC clock source
+ This parameter can be a value of @ref RCCEx_CEC_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F051x8 || STM32F058xx */
+
+#if defined(STM32F071xB)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCC_USART1_Clock_Source */
+
+ uint32_t Usart2ClockSelection; /*!< USART2 clock source
+ This parameter can be a value of @ref RCCEx_USART2_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t CecClockSelection; /*!< HDMI CEC clock source
+ This parameter can be a value of @ref RCCEx_CEC_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F071xB */
+
+#if defined(STM32F072xB) || defined(STM32F078xx)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCC_USART1_Clock_Source */
+
+ uint32_t Usart2ClockSelection; /*!< USART2 clock source
+ This parameter can be a value of @ref RCCEx_USART2_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t CecClockSelection; /*!< HDMI CEC clock source
+ This parameter can be a value of @ref RCCEx_CEC_Clock_Source */
+
+ uint32_t UsbClockSelection; /*!< USB clock source
+ This parameter can be a value of @ref RCCEx_USB_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F072xB || STM32F078xx */
+
+
+#if defined(STM32F091xC) || defined(STM32F098xx)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCC_USART1_Clock_Source */
+
+ uint32_t Usart2ClockSelection; /*!< USART2 clock source
+ This parameter can be a value of @ref RCCEx_USART2_Clock_Source */
+
+ uint32_t Usart3ClockSelection; /*!< USART3 clock source
+ This parameter can be a value of @ref RCCEx_USART3_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t CecClockSelection; /*!< HDMI CEC clock source
+ This parameter can be a value of @ref RCCEx_CEC_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F091xC || STM32F098xx */
+
+#if defined(CRS)
+
+/**
+ * @brief RCC_CRS Init structure definition
+ */
+typedef struct
+{
+ uint32_t Prescaler; /*!< Specifies the division factor of the SYNC signal.
+ This parameter can be a value of @ref RCCEx_CRS_SynchroDivider */
+
+ uint32_t Source; /*!< Specifies the SYNC signal source.
+ This parameter can be a value of @ref RCCEx_CRS_SynchroSource */
+
+ uint32_t Polarity; /*!< Specifies the input polarity for the SYNC signal source.
+ This parameter can be a value of @ref RCCEx_CRS_SynchroPolarity */
+
+ uint32_t ReloadValue; /*!< Specifies the value to be loaded in the frequency error counter with each SYNC event.
+ It can be calculated in using macro @ref __HAL_RCC_CRS_RELOADVALUE_CALCULATE(__FTARGET__, __FSYNC__)
+ This parameter must be a number between 0 and 0xFFFF or a value of @ref RCCEx_CRS_ReloadValueDefault .*/
+
+ uint32_t ErrorLimitValue; /*!< Specifies the value to be used to evaluate the captured frequency error value.
+ This parameter must be a number between 0 and 0xFF or a value of @ref RCCEx_CRS_ErrorLimitDefault */
+
+ uint32_t HSI48CalibrationValue; /*!< Specifies a user-programmable trimming value to the HSI48 oscillator.
+ This parameter must be a number between 0 and 0x3F or a value of @ref RCCEx_CRS_HSI48CalibrationDefault */
+
+}RCC_CRSInitTypeDef;
+
+/**
+ * @brief RCC_CRS Synchronization structure definition
+ */
+typedef struct
+{
+ uint32_t ReloadValue; /*!< Specifies the value loaded in the Counter reload value.
+ This parameter must be a number between 0 and 0xFFFFU */
+
+ uint32_t HSI48CalibrationValue; /*!< Specifies value loaded in HSI48 oscillator smooth trimming.
+ This parameter must be a number between 0 and 0x3FU */
+
+ uint32_t FreqErrorCapture; /*!< Specifies the value loaded in the .FECAP, the frequency error counter
+ value latched in the time of the last SYNC event.
+ This parameter must be a number between 0 and 0xFFFFU */
+
+ uint32_t FreqErrorDirection; /*!< Specifies the value loaded in the .FEDIR, the counting direction of the
+ frequency error counter latched in the time of the last SYNC event.
+ It shows whether the actual frequency is below or above the target.
+ This parameter must be a value of @ref RCCEx_CRS_FreqErrorDirection*/
+
+}RCC_CRSSynchroInfoTypeDef;
+
+#endif /* CRS */
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup RCCEx_Exported_Constants RCCEx Exported Constants
+ * @{
+ */
+
+/** @defgroup RCCEx_Periph_Clock_Selection RCCEx Periph Clock Selection
+ * @{
+ */
+#if defined(STM32F030x6) || defined(STM32F030x8) || defined(STM32F031x6) || defined(STM32F038xx)\
+ || defined(STM32F030xC)
+#define RCC_PERIPHCLK_USART1 (0x00000001U)
+#define RCC_PERIPHCLK_I2C1 (0x00000020U)
+#define RCC_PERIPHCLK_RTC (0x00010000U)
+
+#endif /* STM32F030x6 || STM32F030x8 || STM32F031x6 || STM32F038xx ||
+ STM32F030xC */
+
+#if defined(STM32F070x6) || defined(STM32F070xB)
+#define RCC_PERIPHCLK_USART1 (0x00000001U)
+#define RCC_PERIPHCLK_I2C1 (0x00000020U)
+#define RCC_PERIPHCLK_RTC (0x00010000U)
+#define RCC_PERIPHCLK_USB (0x00020000U)
+
+#endif /* STM32F070x6 || STM32F070xB */
+
+#if defined(STM32F042x6) || defined(STM32F048xx)
+#define RCC_PERIPHCLK_USART1 (0x00000001U)
+#define RCC_PERIPHCLK_I2C1 (0x00000020U)
+#define RCC_PERIPHCLK_CEC (0x00000400U)
+#define RCC_PERIPHCLK_RTC (0x00010000U)
+#define RCC_PERIPHCLK_USB (0x00020000U)
+
+#endif /* STM32F042x6 || STM32F048xx */
+
+#if defined(STM32F051x8) || defined(STM32F058xx)
+#define RCC_PERIPHCLK_USART1 (0x00000001U)
+#define RCC_PERIPHCLK_I2C1 (0x00000020U)
+#define RCC_PERIPHCLK_CEC (0x00000400U)
+#define RCC_PERIPHCLK_RTC (0x00010000U)
+
+#endif /* STM32F051x8 || STM32F058xx */
+
+#if defined(STM32F071xB)
+#define RCC_PERIPHCLK_USART1 (0x00000001U)
+#define RCC_PERIPHCLK_USART2 (0x00000002U)
+#define RCC_PERIPHCLK_I2C1 (0x00000020U)
+#define RCC_PERIPHCLK_CEC (0x00000400U)
+#define RCC_PERIPHCLK_RTC (0x00010000U)
+
+#endif /* STM32F071xB */
+
+#if defined(STM32F072xB) || defined(STM32F078xx)
+#define RCC_PERIPHCLK_USART1 (0x00000001U)
+#define RCC_PERIPHCLK_USART2 (0x00000002U)
+#define RCC_PERIPHCLK_I2C1 (0x00000020U)
+#define RCC_PERIPHCLK_CEC (0x00000400U)
+#define RCC_PERIPHCLK_RTC (0x00010000U)
+#define RCC_PERIPHCLK_USB (0x00020000U)
+
+#endif /* STM32F072xB || STM32F078xx */
+
+#if defined(STM32F091xC) || defined(STM32F098xx)
+#define RCC_PERIPHCLK_USART1 (0x00000001U)
+#define RCC_PERIPHCLK_USART2 (0x00000002U)
+#define RCC_PERIPHCLK_I2C1 (0x00000020U)
+#define RCC_PERIPHCLK_CEC (0x00000400U)
+#define RCC_PERIPHCLK_RTC (0x00010000U)
+#define RCC_PERIPHCLK_USART3 (0x00040000U)
+
+#endif /* STM32F091xC || STM32F098xx */
+
+/**
+ * @}
+ */
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB) || defined(STM32F078xx)
+
+/** @defgroup RCCEx_USB_Clock_Source RCCEx USB Clock Source
+ * @{
+ */
+#define RCC_USBCLKSOURCE_HSI48 RCC_CFGR3_USBSW_HSI48 /*!< HSI48 clock selected as USB clock source */
+#define RCC_USBCLKSOURCE_PLL RCC_CFGR3_USBSW_PLLCLK /*!< PLL clock (PLLCLK) selected as USB clock */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F042x6 || STM32F048xx || STM32F072xB || STM32F078xx */
+
+#if defined(STM32F070x6) || defined(STM32F070xB)
+
+/** @defgroup RCCEx_USB_Clock_Source RCCEx USB Clock Source
+ * @{
+ */
+#define RCC_USBCLKSOURCE_NONE (0x00000000U) /*!< USB clock disabled */
+#define RCC_USBCLKSOURCE_PLL RCC_CFGR3_USBSW_PLLCLK /*!< PLL clock (PLLCLK) selected as USB clock */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F070x6 || STM32F070xB */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\
+ || defined(STM32F091xC) || defined(STM32F098xx)
+
+/** @defgroup RCCEx_USART2_Clock_Source RCCEx USART2 Clock Source
+ * @{
+ */
+#define RCC_USART2CLKSOURCE_PCLK1 RCC_CFGR3_USART2SW_PCLK
+#define RCC_USART2CLKSOURCE_SYSCLK RCC_CFGR3_USART2SW_SYSCLK
+#define RCC_USART2CLKSOURCE_LSE RCC_CFGR3_USART2SW_LSE
+#define RCC_USART2CLKSOURCE_HSI RCC_CFGR3_USART2SW_HSI
+
+/**
+ * @}
+ */
+
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F091xC) || defined(STM32F098xx)
+
+/** @defgroup RCCEx_USART3_Clock_Source RCCEx USART3 Clock Source
+ * @{
+ */
+#define RCC_USART3CLKSOURCE_PCLK1 RCC_CFGR3_USART3SW_PCLK
+#define RCC_USART3CLKSOURCE_SYSCLK RCC_CFGR3_USART3SW_SYSCLK
+#define RCC_USART3CLKSOURCE_LSE RCC_CFGR3_USART3SW_LSE
+#define RCC_USART3CLKSOURCE_HSI RCC_CFGR3_USART3SW_HSI
+
+/**
+ * @}
+ */
+
+#endif /* STM32F091xC || STM32F098xx */
+
+
+#if defined(STM32F042x6) || defined(STM32F048xx)\
+ || defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\
+ || defined(STM32F091xC) || defined(STM32F098xx)
+
+/** @defgroup RCCEx_CEC_Clock_Source RCCEx CEC Clock Source
+ * @{
+ */
+#define RCC_CECCLKSOURCE_HSI RCC_CFGR3_CECSW_HSI_DIV244
+#define RCC_CECCLKSOURCE_LSE RCC_CFGR3_CECSW_LSE
+
+/**
+ * @}
+ */
+
+#endif /* STM32F042x6 || STM32F048xx || */
+ /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+/** @defgroup RCCEx_MCOx_Clock_Prescaler RCCEx MCOx Clock Prescaler
+ * @{
+ */
+
+#if defined(RCC_CFGR_MCOPRE)
+
+#define RCC_MCODIV_1 (0x00000000U)
+#define RCC_MCODIV_2 (0x10000000U)
+#define RCC_MCODIV_4 (0x20000000U)
+#define RCC_MCODIV_8 (0x30000000U)
+#define RCC_MCODIV_16 (0x40000000U)
+#define RCC_MCODIV_32 (0x50000000U)
+#define RCC_MCODIV_64 (0x60000000U)
+#define RCC_MCODIV_128 (0x70000000U)
+
+#else
+
+#define RCC_MCODIV_1 (0x00000000U)
+
+#endif /* RCC_CFGR_MCOPRE */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_LSEDrive_Configuration RCC LSE Drive Configuration
+ * @{
+ */
+
+#define RCC_LSEDRIVE_LOW (0x00000000U) /*!< Xtal mode lower driving capability */
+#define RCC_LSEDRIVE_MEDIUMLOW RCC_BDCR_LSEDRV_1 /*!< Xtal mode medium low driving capability */
+#define RCC_LSEDRIVE_MEDIUMHIGH RCC_BDCR_LSEDRV_0 /*!< Xtal mode medium high driving capability */
+#define RCC_LSEDRIVE_HIGH RCC_BDCR_LSEDRV /*!< Xtal mode higher driving capability */
+
+/**
+ * @}
+ */
+
+#if defined(CRS)
+
+/** @defgroup RCCEx_CRS_Status RCCEx CRS Status
+ * @{
+ */
+#define RCC_CRS_NONE (0x00000000U)
+#define RCC_CRS_TIMEOUT (0x00000001U)
+#define RCC_CRS_SYNCOK (0x00000002U)
+#define RCC_CRS_SYNCWARN (0x00000004U)
+#define RCC_CRS_SYNCERR (0x00000008U)
+#define RCC_CRS_SYNCMISS (0x00000010U)
+#define RCC_CRS_TRIMOVF (0x00000020U)
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_CRS_SynchroSource RCCEx CRS Synchronization Source
+ * @{
+ */
+#define RCC_CRS_SYNC_SOURCE_GPIO (0x00000000U) /*!< Synchro Signal source GPIO */
+#define RCC_CRS_SYNC_SOURCE_LSE CRS_CFGR_SYNCSRC_0 /*!< Synchro Signal source LSE */
+#define RCC_CRS_SYNC_SOURCE_USB CRS_CFGR_SYNCSRC_1 /*!< Synchro Signal source USB SOF (default)*/
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_CRS_SynchroDivider RCCEx CRS Synchronization Divider
+ * @{
+ */
+#define RCC_CRS_SYNC_DIV1 (0x00000000U) /*!< Synchro Signal not divided (default) */
+#define RCC_CRS_SYNC_DIV2 CRS_CFGR_SYNCDIV_0 /*!< Synchro Signal divided by 2 */
+#define RCC_CRS_SYNC_DIV4 CRS_CFGR_SYNCDIV_1 /*!< Synchro Signal divided by 4 */
+#define RCC_CRS_SYNC_DIV8 (CRS_CFGR_SYNCDIV_1 | CRS_CFGR_SYNCDIV_0) /*!< Synchro Signal divided by 8 */
+#define RCC_CRS_SYNC_DIV16 CRS_CFGR_SYNCDIV_2 /*!< Synchro Signal divided by 16 */
+#define RCC_CRS_SYNC_DIV32 (CRS_CFGR_SYNCDIV_2 | CRS_CFGR_SYNCDIV_0) /*!< Synchro Signal divided by 32 */
+#define RCC_CRS_SYNC_DIV64 (CRS_CFGR_SYNCDIV_2 | CRS_CFGR_SYNCDIV_1) /*!< Synchro Signal divided by 64 */
+#define RCC_CRS_SYNC_DIV128 CRS_CFGR_SYNCDIV /*!< Synchro Signal divided by 128 */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_CRS_SynchroPolarity RCCEx CRS Synchronization Polarity
+ * @{
+ */
+#define RCC_CRS_SYNC_POLARITY_RISING (0x00000000U) /*!< Synchro Active on rising edge (default) */
+#define RCC_CRS_SYNC_POLARITY_FALLING CRS_CFGR_SYNCPOL /*!< Synchro Active on falling edge */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_CRS_ReloadValueDefault RCCEx CRS Default Reload Value
+ * @{
+ */
+#define RCC_CRS_RELOADVALUE_DEFAULT (0x0000BB7FU) /*!< The reset value of the RELOAD field corresponds
+ to a target frequency of 48 MHz and a synchronization signal frequency of 1 kHz (SOF signal from USB). */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_CRS_ErrorLimitDefault RCCEx CRS Default Error Limit Value
+ * @{
+ */
+#define RCC_CRS_ERRORLIMIT_DEFAULT (0x00000022U) /*!< Default Frequency error limit */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_CRS_HSI48CalibrationDefault RCCEx CRS Default HSI48 Calibration vakye
+ * @{
+ */
+#define RCC_CRS_HSI48CALIBRATION_DEFAULT (0x00000020U) /*!< The default value is 32, which corresponds to the middle of the trimming interval.
+ The trimming step is around 67 kHz between two consecutive TRIM steps. A higher TRIM value
+ corresponds to a higher output frequency */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_CRS_FreqErrorDirection RCCEx CRS Frequency Error Direction
+ * @{
+ */
+#define RCC_CRS_FREQERRORDIR_UP (0x00000000U) /*!< Upcounting direction, the actual frequency is above the target */
+#define RCC_CRS_FREQERRORDIR_DOWN ((uint32_t)CRS_ISR_FEDIR) /*!< Downcounting direction, the actual frequency is below the target */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_CRS_Interrupt_Sources RCCEx CRS Interrupt Sources
+ * @{
+ */
+#define RCC_CRS_IT_SYNCOK CRS_CR_SYNCOKIE /*!< SYNC event OK */
+#define RCC_CRS_IT_SYNCWARN CRS_CR_SYNCWARNIE /*!< SYNC warning */
+#define RCC_CRS_IT_ERR CRS_CR_ERRIE /*!< Error */
+#define RCC_CRS_IT_ESYNC CRS_CR_ESYNCIE /*!< Expected SYNC */
+#define RCC_CRS_IT_SYNCERR CRS_CR_ERRIE /*!< SYNC error */
+#define RCC_CRS_IT_SYNCMISS CRS_CR_ERRIE /*!< SYNC missed */
+#define RCC_CRS_IT_TRIMOVF CRS_CR_ERRIE /*!< Trimming overflow or underflow */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_CRS_Flags RCCEx CRS Flags
+ * @{
+ */
+#define RCC_CRS_FLAG_SYNCOK CRS_ISR_SYNCOKF /*!< SYNC event OK flag */
+#define RCC_CRS_FLAG_SYNCWARN CRS_ISR_SYNCWARNF /*!< SYNC warning flag */
+#define RCC_CRS_FLAG_ERR CRS_ISR_ERRF /*!< Error flag */
+#define RCC_CRS_FLAG_ESYNC CRS_ISR_ESYNCF /*!< Expected SYNC flag */
+#define RCC_CRS_FLAG_SYNCERR CRS_ISR_SYNCERR /*!< SYNC error */
+#define RCC_CRS_FLAG_SYNCMISS CRS_ISR_SYNCMISS /*!< SYNC missed*/
+#define RCC_CRS_FLAG_TRIMOVF CRS_ISR_TRIMOVF /*!< Trimming overflow or underflow */
+
+/**
+ * @}
+ */
+
+#endif /* CRS */
+
+/**
+ * @}
+ */
+
+/* Exported macros ------------------------------------------------------------*/
+/** @defgroup RCCEx_Exported_Macros RCCEx Exported Macros
+ * @{
+ */
+
+/** @defgroup RCCEx_Peripheral_Clock_Enable_Disable RCCEx_Peripheral_Clock_Enable_Disable
+ * @brief Enables or disables the AHB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#if defined(GPIOD)
+
+#define __HAL_RCC_GPIOD_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHBENR, RCC_AHBENR_GPIODEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_GPIODEN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+
+#define __HAL_RCC_GPIOD_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIODEN))
+
+#endif /* GPIOD */
+
+#if defined(GPIOE)
+
+#define __HAL_RCC_GPIOE_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHBENR, RCC_AHBENR_GPIOEEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_GPIOEEN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+
+#define __HAL_RCC_GPIOE_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOEEN))
+
+#endif /* GPIOE */
+
+#if defined(STM32F042x6) || defined(STM32F048xx)\
+ || defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\
+ || defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __HAL_RCC_TSC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHBENR, RCC_AHBENR_TSCEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_TSCEN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+
+#define __HAL_RCC_TSC_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_TSCEN))
+
+#endif /* STM32F042x6 || STM32F048xx || */
+ /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __HAL_RCC_DMA2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHBENR, RCC_AHBENR_DMA2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_DMA2EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+
+#define __HAL_RCC_DMA2_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_DMA2EN))
+
+#endif /* STM32F091xC || STM32F098xx */
+
+/** @brief Enable or disable the Low Speed APB (APB1) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+#if defined(STM32F030x8)\
+ || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6)\
+ || defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)\
+ || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __HAL_RCC_USART2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART2EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+
+#define __HAL_RCC_USART2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART2EN))
+
+#endif /* STM32F030x8 || STM32F042x6 || STM32F048xx || */
+ /* STM32F051x8 || STM32F058xx || STM32F070x6 || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F030x8)\
+ || defined(STM32F042x6) || defined(STM32F048xx)\
+ || defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)\
+ || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __HAL_RCC_SPI2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI2EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+
+#define __HAL_RCC_SPI2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI2EN))
+
+#endif /* STM32F030x8 || STM32F042x6 || STM32F048xx || */
+ /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F031x6) || defined(STM32F038xx)\
+ || defined(STM32F042x6) || defined(STM32F048xx)\
+ || defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\
+ || defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __HAL_RCC_TIM2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+
+#define __HAL_RCC_TIM2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM2EN))
+
+#endif /* STM32F031x6 || STM32F038xx || */
+ /* STM32F042x6 || STM32F048xx || */
+ /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F030x8) \
+ || defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)\
+ || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __HAL_RCC_TIM6_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_I2C2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C2EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+
+#define __HAL_RCC_TIM6_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM6EN))
+#define __HAL_RCC_I2C2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C2EN))
+
+#endif /* STM32F030x8 || */
+ /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\
+ || defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __HAL_RCC_DAC1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+
+#define __HAL_RCC_DAC1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DACEN))
+
+#endif /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F042x6) || defined(STM32F048xx)\
+ || defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\
+ || defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __HAL_RCC_CEC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CECEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CECEN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+
+#define __HAL_RCC_CEC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CECEN))
+
+#endif /* STM32F042x6 || STM32F048xx || */
+ /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)\
+ || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __HAL_RCC_TIM7_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_USART3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_USART4_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART4EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART4EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+
+#define __HAL_RCC_TIM7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM7EN))
+#define __HAL_RCC_USART3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART3EN))
+#define __HAL_RCC_USART4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART4EN))
+
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6)\
+ || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)
+
+#define __HAL_RCC_USB_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USBEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USBEN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+
+#define __HAL_RCC_USB_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USBEN))
+
+#endif /* STM32F042x6 || STM32F048xx || STM32F070x6 || */
+ /* STM32F072xB || STM32F078xx || STM32F070xB */
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB)\
+ || defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __HAL_RCC_CAN1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CANEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CANEN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_CAN1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CANEN))
+
+#endif /* STM32F042x6 || STM32F048xx || STM32F072xB || */
+ /* STM32F091xC || STM32F098xx */
+
+#if defined(CRS)
+
+#define __HAL_RCC_CRS_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CRSEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CRSEN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+
+#define __HAL_RCC_CRS_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CRSEN))
+
+#endif /* CRS */
+
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __HAL_RCC_USART5_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART5EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART5EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+
+#define __HAL_RCC_USART5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART5EN))
+
+#endif /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+/** @brief Enable or disable the High Speed APB (APB2) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+#if defined(STM32F030x8) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6)\
+ || defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)\
+ || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __HAL_RCC_TIM15_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM15EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM15EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+
+#define __HAL_RCC_TIM15_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM15EN))
+
+#endif /* STM32F030x8 || STM32F042x6 || STM32F048xx || STM32F070x6 || */
+ /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __HAL_RCC_USART6_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_USART6EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART6EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+
+#define __HAL_RCC_USART6_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART6EN))
+
+#endif /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __HAL_RCC_USART7_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_USART7EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART7EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+#define __HAL_RCC_USART8_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_USART8EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART8EN);\
+ UNUSED(tmpreg); \
+ } while(0U)
+
+#define __HAL_RCC_USART7_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART7EN))
+#define __HAL_RCC_USART8_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART8EN))
+
+#endif /* STM32F091xC || STM32F098xx */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup RCCEx_Force_Release_Peripheral_Reset RCCEx Force Release Peripheral Reset
+ * @brief Forces or releases peripheral reset.
+ * @{
+ */
+
+/** @brief Force or release AHB peripheral reset.
+ */
+#if defined(GPIOD)
+
+#define __HAL_RCC_GPIOD_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIODRST))
+
+#define __HAL_RCC_GPIOD_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIODRST))
+
+#endif /* GPIOD */
+
+#if defined(GPIOE)
+
+#define __HAL_RCC_GPIOE_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOERST))
+
+#define __HAL_RCC_GPIOE_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOERST))
+
+#endif /* GPIOE */
+
+#if defined(STM32F042x6) || defined(STM32F048xx)\
+ || defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\
+ || defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __HAL_RCC_TSC_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_TSCRST))
+
+#define __HAL_RCC_TSC_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_TSCRST))
+
+#endif /* STM32F042x6 || STM32F048xx || */
+ /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+/** @brief Force or release APB1 peripheral reset.
+ */
+#if defined(STM32F030x8) \
+ || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6)\
+ || defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)\
+ || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __HAL_RCC_USART2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART2RST))
+#define __HAL_RCC_SPI2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI2RST))
+
+#define __HAL_RCC_USART2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART2RST))
+#define __HAL_RCC_SPI2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI2RST))
+
+#endif /* STM32F030x8 || STM32F042x6 || STM32F048xx || STM32F070x6 || */
+ /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F031x6) || defined(STM32F038xx)\
+ || defined(STM32F042x6) || defined(STM32F048xx)\
+ || defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\
+ || defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __HAL_RCC_TIM2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM2RST))
+
+#define __HAL_RCC_TIM2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM2RST))
+
+#endif /* STM32F031x6 || STM32F038xx || */
+ /* STM32F042x6 || STM32F048xx || */
+ /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F030x8) \
+ || defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)\
+ || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __HAL_RCC_TIM6_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST))
+#define __HAL_RCC_I2C2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C2RST))
+
+#define __HAL_RCC_TIM6_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM6RST))
+#define __HAL_RCC_I2C2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C2RST))
+
+#endif /* STM32F030x8 || */
+ /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\
+ || defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __HAL_RCC_DAC1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DACRST))
+
+#define __HAL_RCC_DAC1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DACRST))
+
+#endif /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F042x6) || defined(STM32F048xx)\
+ || defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\
+ || defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __HAL_RCC_CEC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CECRST))
+
+#define __HAL_RCC_CEC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CECRST))
+
+#endif /* STM32F042x6 || STM32F048xx || */
+ /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)\
+ || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __HAL_RCC_TIM7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM7RST))
+#define __HAL_RCC_USART3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART3RST))
+#define __HAL_RCC_USART4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART4RST))
+
+#define __HAL_RCC_TIM7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM7RST))
+#define __HAL_RCC_USART3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART3RST))
+#define __HAL_RCC_USART4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART4RST))
+
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6)\
+ || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)
+
+#define __HAL_RCC_USB_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USBRST))
+
+#define __HAL_RCC_USB_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USBRST))
+
+#endif /* STM32F042x6 || STM32F048xx || STM32F070x6 || */
+ /* STM32F072xB || STM32F078xx || STM32F070xB */
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB)\
+ || defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __HAL_RCC_CAN1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CANRST))
+
+#define __HAL_RCC_CAN1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CANRST))
+
+#endif /* STM32F042x6 || STM32F048xx || STM32F072xB || */
+ /* STM32F091xC || STM32F098xx */
+
+#if defined(CRS)
+
+#define __HAL_RCC_CRS_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CRSRST))
+
+#define __HAL_RCC_CRS_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CRSRST))
+
+#endif /* CRS */
+
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __HAL_RCC_USART5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART5RST))
+
+#define __HAL_RCC_USART5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART5RST))
+
+#endif /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+
+/** @brief Force or release APB2 peripheral reset.
+ */
+#if defined(STM32F030x8) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6)\
+ || defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)\
+ || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __HAL_RCC_TIM15_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM15RST))
+
+#define __HAL_RCC_TIM15_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM15RST))
+
+#endif /* STM32F030x8 || STM32F042x6 || STM32F048xx || STM32F070x6 || */
+ /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __HAL_RCC_USART6_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART6RST))
+
+#define __HAL_RCC_USART6_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART6RST))
+
+#endif /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __HAL_RCC_USART7_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART7RST))
+#define __HAL_RCC_USART8_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART8RST))
+
+#define __HAL_RCC_USART7_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART7RST))
+#define __HAL_RCC_USART8_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART8RST))
+
+#endif /* STM32F091xC || STM32F098xx */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_Peripheral_Clock_Enable_Disable_Status Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+/** @brief AHB Peripheral Clock Enable Disable Status
+ */
+#if defined(GPIOD)
+
+#define __HAL_RCC_GPIOD_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIODEN)) != RESET)
+#define __HAL_RCC_GPIOD_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIODEN)) == RESET)
+
+#endif /* GPIOD */
+
+#if defined(GPIOE)
+
+#define __HAL_RCC_GPIOE_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOEEN)) != RESET)
+#define __HAL_RCC_GPIOE_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_GPIOEEN)) == RESET)
+
+#endif /* GPIOE */
+
+#if defined(STM32F042x6) || defined(STM32F048xx)\
+ || defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\
+ || defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __HAL_RCC_TSC_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_TSCEN)) != RESET)
+#define __HAL_RCC_TSC_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_TSCEN)) == RESET)
+
+#endif /* STM32F042x6 || STM32F048xx || */
+ /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __HAL_RCC_DMA2_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_DMA2EN)) != RESET)
+#define __HAL_RCC_DMA2_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_DMA2EN)) == RESET)
+
+#endif /* STM32F091xC || STM32F098xx */
+
+/** @brief APB1 Peripheral Clock Enable Disable Status
+ */
+#if defined(STM32F030x8)\
+ || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6)\
+ || defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)\
+ || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __HAL_RCC_USART2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART2EN)) != RESET)
+#define __HAL_RCC_USART2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART2EN)) == RESET)
+
+#endif /* STM32F030x8 || STM32F042x6 || STM32F048xx || */
+ /* STM32F051x8 || STM32F058xx || STM32F070x6 || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F030x8)\
+ || defined(STM32F042x6) || defined(STM32F048xx)\
+ || defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)\
+ || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __HAL_RCC_SPI2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI2EN)) != RESET)
+#define __HAL_RCC_SPI2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI2EN)) == RESET)
+
+#endif /* STM32F030x8 || STM32F042x6 || STM32F048xx || */
+ /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F031x6) || defined(STM32F038xx)\
+ || defined(STM32F042x6) || defined(STM32F048xx)\
+ || defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\
+ || defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __HAL_RCC_TIM2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) != RESET)
+#define __HAL_RCC_TIM2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) == RESET)
+
+#endif /* STM32F031x6 || STM32F038xx || */
+ /* STM32F042x6 || STM32F048xx || */
+ /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F030x8) \
+ || defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)\
+ || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __HAL_RCC_TIM6_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) != RESET)
+#define __HAL_RCC_I2C2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C2EN)) != RESET)
+#define __HAL_RCC_TIM6_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) == RESET)
+#define __HAL_RCC_I2C2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C2EN)) == RESET)
+
+#endif /* STM32F030x8 || */
+ /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\
+ || defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __HAL_RCC_DAC1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DAC1EN)) != RESET)
+#define __HAL_RCC_DAC1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DAC1EN)) == RESET)
+
+#endif /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F042x6) || defined(STM32F048xx)\
+ || defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\
+ || defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __HAL_RCC_CEC_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CECEN)) != RESET)
+#define __HAL_RCC_CEC_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CECEN)) == RESET)
+
+#endif /* STM32F042x6 || STM32F048xx || */
+ /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)\
+ || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __HAL_RCC_TIM7_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) != RESET)
+#define __HAL_RCC_USART3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) != RESET)
+#define __HAL_RCC_USART4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART4EN)) != RESET)
+#define __HAL_RCC_TIM7_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) == RESET)
+#define __HAL_RCC_USART3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) == RESET)
+#define __HAL_RCC_USART4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART4EN)) == RESET)
+
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6)\
+ || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)
+
+#define __HAL_RCC_USB_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USBEN)) != RESET)
+#define __HAL_RCC_USB_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USBEN)) == RESET)
+
+#endif /* STM32F042x6 || STM32F048xx || STM32F070x6 || */
+ /* STM32F072xB || STM32F078xx || STM32F070xB */
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB)\
+ || defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __HAL_RCC_CAN1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) != RESET)
+#define __HAL_RCC_CAN1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) == RESET)
+
+#endif /* STM32F042x6 || STM32F048xx || STM32F072xB || */
+ /* STM32F091xC || STM32F098xx */
+
+#if defined(CRS)
+
+#define __HAL_RCC_CRS_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CRSEN)) != RESET)
+#define __HAL_RCC_CRS_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CRSEN)) == RESET)
+
+#endif /* CRS */
+
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __HAL_RCC_USART5_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART5EN)) != RESET)
+#define __HAL_RCC_USART5_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART5EN)) == RESET)
+
+#endif /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+/** @brief APB1 Peripheral Clock Enable Disable Status
+ */
+#if defined(STM32F030x8) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6)\
+ || defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)\
+ || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __HAL_RCC_TIM15_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM15EN)) != RESET)
+#define __HAL_RCC_TIM15_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM15EN)) == RESET)
+
+#endif /* STM32F030x8 || STM32F042x6 || STM32F048xx || STM32F070x6 || */
+ /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __HAL_RCC_USART6_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART6EN)) != RESET)
+#define __HAL_RCC_USART6_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART6EN)) == RESET)
+
+#endif /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __HAL_RCC_USART7_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART7EN)) != RESET)
+#define __HAL_RCC_USART8_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART8EN)) != RESET)
+#define __HAL_RCC_USART7_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART7EN)) == RESET)
+#define __HAL_RCC_USART8_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART8EN)) == RESET)
+
+#endif /* STM32F091xC || STM32F098xx */
+/**
+ * @}
+ */
+
+
+/** @defgroup RCCEx_HSI48_Enable_Disable RCCEx HSI48 Enable Disable
+ * @brief Macros to enable or disable the Internal 48Mhz High Speed oscillator (HSI48).
+ * @note The HSI48 is stopped by hardware when entering STOP and STANDBY modes.
+ * @note HSI48 can not be stopped if it is used as system clock source. In this case,
+ * you have to select another source of the system clock then stop the HSI14.
+ * @note After enabling the HSI48 with __HAL_RCC_HSI48_ENABLE(), the application software
+ * should wait on HSI48RDY flag to be set indicating that HSI48 clock is stable and can be
+ * used as system clock source. This is not necessary if HAL_RCC_OscConfig() is used.
+ * @note When the HSI48 is stopped, HSI48RDY flag goes low after 6 HSI48 oscillator
+ * clock cycles.
+ * @{
+ */
+#if defined(RCC_HSI48_SUPPORT)
+
+#define __HAL_RCC_HSI48_ENABLE() SET_BIT(RCC->CR2, RCC_CR2_HSI48ON)
+#define __HAL_RCC_HSI48_DISABLE() CLEAR_BIT(RCC->CR2, RCC_CR2_HSI48ON)
+
+/** @brief Macro to get the Internal 48Mhz High Speed oscillator (HSI48) state.
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_HSI48_ON HSI48 enabled
+ * @arg @ref RCC_HSI48_OFF HSI48 disabled
+ */
+#define __HAL_RCC_GET_HSI48_STATE() \
+ (((uint32_t)(READ_BIT(RCC->CR2, RCC_CR2_HSI48ON)) != RESET) ? RCC_HSI48_ON : RCC_HSI48_OFF)
+
+#endif /* RCC_HSI48_SUPPORT */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_Peripheral_Clock_Source_Config RCCEx Peripheral Clock Source Config
+ * @{
+ */
+#if defined(STM32F042x6) || defined(STM32F048xx)\
+ || defined(STM32F072xB) || defined(STM32F078xx)\
+ || defined(STM32F070x6) || defined(STM32F070xB)
+
+/** @brief Macro to configure the USB clock (USBCLK).
+ * @param __USBCLKSOURCE__ specifies the USB clock source.
+ * This parameter can be one of the following values:
+@if STM32F070xB
+@elseif STM32F070x6
+@else
+ * @arg @ref RCC_USBCLKSOURCE_HSI48 HSI48 selected as USB clock
+@endif
+ * @arg @ref RCC_USBCLKSOURCE_PLL PLL Clock selected as USB clock
+ */
+#define __HAL_RCC_USB_CONFIG(__USBCLKSOURCE__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_USBSW, (uint32_t)(__USBCLKSOURCE__))
+
+/** @brief Macro to get the USB clock source.
+ * @retval The clock source can be one of the following values:
+@if STM32F070xB
+@elseif STM32F070x6
+@else
+ * @arg @ref RCC_USBCLKSOURCE_HSI48 HSI48 selected as USB clock
+@endif
+ * @arg @ref RCC_USBCLKSOURCE_PLL PLL Clock selected as USB clock
+ */
+#define __HAL_RCC_GET_USB_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_USBSW)))
+
+#endif /* STM32F042x6 || STM32F048xx || */
+ /* STM32F072xB || STM32F078xx || */
+ /* STM32F070x6 || STM32F070xB */
+
+#if defined(STM32F042x6) || defined(STM32F048xx)\
+ || defined(STM32F051x8) || defined(STM32F058xx)\
+ || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\
+ || defined(STM32F091xC) || defined(STM32F098xx)
+
+/** @brief Macro to configure the CEC clock.
+ * @param __CECCLKSOURCE__ specifies the CEC clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_CECCLKSOURCE_HSI HSI selected as CEC clock
+ * @arg @ref RCC_CECCLKSOURCE_LSE LSE selected as CEC clock
+ */
+#define __HAL_RCC_CEC_CONFIG(__CECCLKSOURCE__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_CECSW, (uint32_t)(__CECCLKSOURCE__))
+
+/** @brief Macro to get the HDMI CEC clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_CECCLKSOURCE_HSI HSI selected as CEC clock
+ * @arg @ref RCC_CECCLKSOURCE_LSE LSE selected as CEC clock
+ */
+#define __HAL_RCC_GET_CEC_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_CECSW)))
+
+#endif /* STM32F042x6 || STM32F048xx || */
+ /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || defined(STM32F098xx) */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)\
+ || defined(STM32F091xC) || defined(STM32F098xx)
+/** @brief Macro to configure the USART2 clock (USART2CLK).
+ * @param __USART2CLKSOURCE__ specifies the USART2 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_USART2CLKSOURCE_PCLK1 PCLK1 selected as USART2 clock
+ * @arg @ref RCC_USART2CLKSOURCE_HSI HSI selected as USART2 clock
+ * @arg @ref RCC_USART2CLKSOURCE_SYSCLK System Clock selected as USART2 clock
+ * @arg @ref RCC_USART2CLKSOURCE_LSE LSE selected as USART2 clock
+ */
+#define __HAL_RCC_USART2_CONFIG(__USART2CLKSOURCE__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_USART2SW, (uint32_t)(__USART2CLKSOURCE__))
+
+/** @brief Macro to get the USART2 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_USART2CLKSOURCE_PCLK1 PCLK1 selected as USART2 clock
+ * @arg @ref RCC_USART2CLKSOURCE_HSI HSI selected as USART2 clock
+ * @arg @ref RCC_USART2CLKSOURCE_SYSCLK System Clock selected as USART2 clock
+ * @arg @ref RCC_USART2CLKSOURCE_LSE LSE selected as USART2 clock
+ */
+#define __HAL_RCC_GET_USART2_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_USART2SW)))
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F091xC || STM32F098xx*/
+
+#if defined(STM32F091xC) || defined(STM32F098xx)
+/** @brief Macro to configure the USART3 clock (USART3CLK).
+ * @param __USART3CLKSOURCE__ specifies the USART3 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_USART3CLKSOURCE_PCLK1 PCLK1 selected as USART3 clock
+ * @arg @ref RCC_USART3CLKSOURCE_HSI HSI selected as USART3 clock
+ * @arg @ref RCC_USART3CLKSOURCE_SYSCLK System Clock selected as USART3 clock
+ * @arg @ref RCC_USART3CLKSOURCE_LSE LSE selected as USART3 clock
+ */
+#define __HAL_RCC_USART3_CONFIG(__USART3CLKSOURCE__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_USART3SW, (uint32_t)(__USART3CLKSOURCE__))
+
+/** @brief Macro to get the USART3 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_USART3CLKSOURCE_PCLK1 PCLK1 selected as USART3 clock
+ * @arg @ref RCC_USART3CLKSOURCE_HSI HSI selected as USART3 clock
+ * @arg @ref RCC_USART3CLKSOURCE_SYSCLK System Clock selected as USART3 clock
+ * @arg @ref RCC_USART3CLKSOURCE_LSE LSE selected as USART3 clock
+ */
+#define __HAL_RCC_GET_USART3_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_USART3SW)))
+
+#endif /* STM32F091xC || STM32F098xx */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_LSE_Configuration LSE Drive Configuration
+ * @{
+ */
+
+/**
+ * @brief Macro to configure the External Low Speed oscillator (LSE) drive capability.
+ * @param __RCC_LSEDRIVE__ specifies the new state of the LSE drive capability.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_LSEDRIVE_LOW LSE oscillator low drive capability.
+ * @arg @ref RCC_LSEDRIVE_MEDIUMLOW LSE oscillator medium low drive capability.
+ * @arg @ref RCC_LSEDRIVE_MEDIUMHIGH LSE oscillator medium high drive capability.
+ * @arg @ref RCC_LSEDRIVE_HIGH LSE oscillator high drive capability.
+ * @retval None
+ */
+#define __HAL_RCC_LSEDRIVE_CONFIG(__RCC_LSEDRIVE__) (MODIFY_REG(RCC->BDCR,\
+ RCC_BDCR_LSEDRV, (uint32_t)(__RCC_LSEDRIVE__) ))
+
+/**
+ * @}
+ */
+
+#if defined(CRS)
+
+/** @defgroup RCCEx_IT_And_Flag RCCEx IT and Flag
+ * @{
+ */
+/* Interrupt & Flag management */
+
+/**
+ * @brief Enable the specified CRS interrupts.
+ * @param __INTERRUPT__ specifies the CRS interrupt sources to be enabled.
+ * This parameter can be any combination of the following values:
+ * @arg @ref RCC_CRS_IT_SYNCOK SYNC event OK interrupt
+ * @arg @ref RCC_CRS_IT_SYNCWARN SYNC warning interrupt
+ * @arg @ref RCC_CRS_IT_ERR Synchronization or trimming error interrupt
+ * @arg @ref RCC_CRS_IT_ESYNC Expected SYNC interrupt
+ * @retval None
+ */
+#define __HAL_RCC_CRS_ENABLE_IT(__INTERRUPT__) SET_BIT(CRS->CR, (__INTERRUPT__))
+
+/**
+ * @brief Disable the specified CRS interrupts.
+ * @param __INTERRUPT__ specifies the CRS interrupt sources to be disabled.
+ * This parameter can be any combination of the following values:
+ * @arg @ref RCC_CRS_IT_SYNCOK SYNC event OK interrupt
+ * @arg @ref RCC_CRS_IT_SYNCWARN SYNC warning interrupt
+ * @arg @ref RCC_CRS_IT_ERR Synchronization or trimming error interrupt
+ * @arg @ref RCC_CRS_IT_ESYNC Expected SYNC interrupt
+ * @retval None
+ */
+#define __HAL_RCC_CRS_DISABLE_IT(__INTERRUPT__) CLEAR_BIT(CRS->CR, (__INTERRUPT__))
+
+/** @brief Check whether the CRS interrupt has occurred or not.
+ * @param __INTERRUPT__ specifies the CRS interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_CRS_IT_SYNCOK SYNC event OK interrupt
+ * @arg @ref RCC_CRS_IT_SYNCWARN SYNC warning interrupt
+ * @arg @ref RCC_CRS_IT_ERR Synchronization or trimming error interrupt
+ * @arg @ref RCC_CRS_IT_ESYNC Expected SYNC interrupt
+ * @retval The new state of __INTERRUPT__ (SET or RESET).
+ */
+#define __HAL_RCC_CRS_GET_IT_SOURCE(__INTERRUPT__) ((READ_BIT(CRS->CR, (__INTERRUPT__)) != RESET) ? SET : RESET)
+
+/** @brief Clear the CRS interrupt pending bits
+ * @param __INTERRUPT__ specifies the interrupt pending bit to clear.
+ * This parameter can be any combination of the following values:
+ * @arg @ref RCC_CRS_IT_SYNCOK SYNC event OK interrupt
+ * @arg @ref RCC_CRS_IT_SYNCWARN SYNC warning interrupt
+ * @arg @ref RCC_CRS_IT_ERR Synchronization or trimming error interrupt
+ * @arg @ref RCC_CRS_IT_ESYNC Expected SYNC interrupt
+ * @arg @ref RCC_CRS_IT_TRIMOVF Trimming overflow or underflow interrupt
+ * @arg @ref RCC_CRS_IT_SYNCERR SYNC error interrupt
+ * @arg @ref RCC_CRS_IT_SYNCMISS SYNC missed interrupt
+ */
+#define __HAL_RCC_CRS_CLEAR_IT(__INTERRUPT__) do { \
+ if(((__INTERRUPT__) & RCC_CRS_IT_ERROR_MASK) != RESET) \
+ { \
+ WRITE_REG(CRS->ICR, CRS_ICR_ERRC | ((__INTERRUPT__) & ~RCC_CRS_IT_ERROR_MASK)); \
+ } \
+ else \
+ { \
+ WRITE_REG(CRS->ICR, (__INTERRUPT__)); \
+ } \
+ } while(0U)
+
+/**
+ * @brief Check whether the specified CRS flag is set or not.
+ * @param __FLAG__ specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_CRS_FLAG_SYNCOK SYNC event OK
+ * @arg @ref RCC_CRS_FLAG_SYNCWARN SYNC warning
+ * @arg @ref RCC_CRS_FLAG_ERR Error
+ * @arg @ref RCC_CRS_FLAG_ESYNC Expected SYNC
+ * @arg @ref RCC_CRS_FLAG_TRIMOVF Trimming overflow or underflow
+ * @arg @ref RCC_CRS_FLAG_SYNCERR SYNC error
+ * @arg @ref RCC_CRS_FLAG_SYNCMISS SYNC missed
+ * @retval The new state of _FLAG_ (TRUE or FALSE).
+ */
+#define __HAL_RCC_CRS_GET_FLAG(__FLAG__) (READ_BIT(CRS->ISR, (__FLAG__)) == (__FLAG__))
+
+/**
+ * @brief Clear the CRS specified FLAG.
+ * @param __FLAG__ specifies the flag to clear.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_CRS_FLAG_SYNCOK SYNC event OK
+ * @arg @ref RCC_CRS_FLAG_SYNCWARN SYNC warning
+ * @arg @ref RCC_CRS_FLAG_ERR Error
+ * @arg @ref RCC_CRS_FLAG_ESYNC Expected SYNC
+ * @arg @ref RCC_CRS_FLAG_TRIMOVF Trimming overflow or underflow
+ * @arg @ref RCC_CRS_FLAG_SYNCERR SYNC error
+ * @arg @ref RCC_CRS_FLAG_SYNCMISS SYNC missed
+ * @note RCC_CRS_FLAG_ERR clears RCC_CRS_FLAG_TRIMOVF, RCC_CRS_FLAG_SYNCERR, RCC_CRS_FLAG_SYNCMISS and consequently RCC_CRS_FLAG_ERR
+ * @retval None
+ */
+#define __HAL_RCC_CRS_CLEAR_FLAG(__FLAG__) do { \
+ if(((__FLAG__) & RCC_CRS_FLAG_ERROR_MASK) != RESET) \
+ { \
+ WRITE_REG(CRS->ICR, CRS_ICR_ERRC | ((__FLAG__) & ~RCC_CRS_FLAG_ERROR_MASK)); \
+ } \
+ else \
+ { \
+ WRITE_REG(CRS->ICR, (__FLAG__)); \
+ } \
+ } while(0U)
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_CRS_Extended_Features RCCEx CRS Extended Features
+ * @{
+ */
+/**
+ * @brief Enable the oscillator clock for frequency error counter.
+ * @note when the CEN bit is set the CRS_CFGR register becomes write-protected.
+ * @retval None
+ */
+#define __HAL_RCC_CRS_FREQ_ERROR_COUNTER_ENABLE() SET_BIT(CRS->CR, CRS_CR_CEN)
+
+/**
+ * @brief Disable the oscillator clock for frequency error counter.
+ * @retval None
+ */
+#define __HAL_RCC_CRS_FREQ_ERROR_COUNTER_DISABLE() CLEAR_BIT(CRS->CR, CRS_CR_CEN)
+
+/**
+ * @brief Enable the automatic hardware adjustement of TRIM bits.
+ * @note When the AUTOTRIMEN bit is set the CRS_CFGR register becomes write-protected.
+ * @retval None
+ */
+#define __HAL_RCC_CRS_AUTOMATIC_CALIB_ENABLE() SET_BIT(CRS->CR, CRS_CR_AUTOTRIMEN)
+
+/**
+ * @brief Disable the automatic hardware adjustement of TRIM bits.
+ * @retval None
+ */
+#define __HAL_RCC_CRS_AUTOMATIC_CALIB_DISABLE() CLEAR_BIT(CRS->CR, CRS_CR_AUTOTRIMEN)
+
+/**
+ * @brief Macro to calculate reload value to be set in CRS register according to target and sync frequencies
+ * @note The RELOAD value should be selected according to the ratio between the target frequency and the frequency
+ * of the synchronization source after prescaling. It is then decreased by one in order to
+ * reach the expected synchronization on the zero value. The formula is the following:
+ * RELOAD = (fTARGET / fSYNC) -1
+ * @param __FTARGET__ Target frequency (value in Hz)
+ * @param __FSYNC__ Synchronization signal frequency (value in Hz)
+ * @retval None
+ */
+#define __HAL_RCC_CRS_RELOADVALUE_CALCULATE(__FTARGET__, __FSYNC__) (((__FTARGET__) / (__FSYNC__)) - 1U)
+
+/**
+ * @}
+ */
+
+#endif /* CRS */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup RCCEx_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup RCCEx_Exported_Functions_Group1
+ * @{
+ */
+
+HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit);
+void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit);
+uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk);
+
+/**
+ * @}
+ */
+
+#if defined(CRS)
+
+/** @addtogroup RCCEx_Exported_Functions_Group3
+ * @{
+ */
+
+void HAL_RCCEx_CRSConfig(RCC_CRSInitTypeDef *pInit);
+void HAL_RCCEx_CRSSoftwareSynchronizationGenerate(void);
+void HAL_RCCEx_CRSGetSynchronizationInfo(RCC_CRSSynchroInfoTypeDef *pSynchroInfo);
+uint32_t HAL_RCCEx_CRSWaitSynchronization(uint32_t Timeout);
+void HAL_RCCEx_CRS_IRQHandler(void);
+void HAL_RCCEx_CRS_SyncOkCallback(void);
+void HAL_RCCEx_CRS_SyncWarnCallback(void);
+void HAL_RCCEx_CRS_ExpectedSyncCallback(void);
+void HAL_RCCEx_CRS_ErrorCallback(uint32_t Error);
+
+/**
+ * @}
+ */
+
+#endif /* CRS */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_RCC_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rtc.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rtc.h
new file mode 100644
index 0000000..fdfd236
--- /dev/null
+++ b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rtc.h
@@ -0,0 +1,847 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_rtc.h
+ * @author MCD Application Team
+ * @brief Header file of RTC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_RTC_H
+#define __STM32F0xx_HAL_RTC_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup RTC RTC
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup RTC_Exported_Types RTC Exported Types
+ * @{
+ */
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_RTC_STATE_RESET = 0x00U, /*!< RTC not yet initialized or disabled */
+ HAL_RTC_STATE_READY = 0x01U, /*!< RTC initialized and ready for use */
+ HAL_RTC_STATE_BUSY = 0x02U, /*!< RTC process is ongoing */
+ HAL_RTC_STATE_TIMEOUT = 0x03U, /*!< RTC timeout state */
+ HAL_RTC_STATE_ERROR = 0x04U /*!< RTC error state */
+
+} HAL_RTCStateTypeDef;
+
+/**
+ * @brief RTC Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t HourFormat; /*!< Specifies the RTC Hour Format.
+ This parameter can be a value of @ref RTC_Hour_Formats */
+
+ uint32_t AsynchPrediv; /*!< Specifies the RTC Asynchronous Predivider value.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x7F */
+
+ uint32_t SynchPrediv; /*!< Specifies the RTC Synchronous Predivider value.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x7FFF */
+
+ uint32_t OutPut; /*!< Specifies which signal will be routed to the RTC output.
+ This parameter can be a value of @ref RTCEx_Output_selection_Definitions */
+
+ uint32_t OutPutPolarity; /*!< Specifies the polarity of the output signal.
+ This parameter can be a value of @ref RTC_Output_Polarity_Definitions */
+
+ uint32_t OutPutType; /*!< Specifies the RTC Output Pin mode.
+ This parameter can be a value of @ref RTC_Output_Type_ALARM_OUT */
+} RTC_InitTypeDef;
+
+/**
+ * @brief RTC Time structure definition
+ */
+typedef struct
+{
+ uint8_t Hours; /*!< Specifies the RTC Time Hour.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 12 if the RTC_HourFormat_12 is selected.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 23 if the RTC_HourFormat_24 is selected */
+
+ uint8_t Minutes; /*!< Specifies the RTC Time Minutes.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 59 */
+
+ uint8_t Seconds; /*!< Specifies the RTC Time Seconds.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 59 */
+
+ uint8_t TimeFormat; /*!< Specifies the RTC AM/PM Time.
+ This parameter can be a value of @ref RTC_AM_PM_Definitions */
+
+ uint32_t SubSeconds; /*!< Specifies the RTC_SSR RTC Sub Second register content.
+ This parameter corresponds to a time unit range between [0-1] Second
+ with [1 Sec / SecondFraction +1] granularity */
+
+ uint32_t SecondFraction; /*!< Specifies the range or granularity of Sub Second register content
+ corresponding to Synchronous pre-scaler factor value (PREDIV_S)
+ This parameter corresponds to a time unit range between [0-1] Second
+ with [1 Sec / SecondFraction +1] granularity.
+ This field will be used only by HAL_RTC_GetTime function */
+
+ uint32_t DayLightSaving; /*!< Specifies RTC_DayLightSaveOperation: the value of hour adjustment.
+ This parameter can be a value of @ref RTC_DayLightSaving_Definitions */
+
+ uint32_t StoreOperation; /*!< Specifies RTC_StoreOperation value to be written in the BCK bit
+ in CR register to store the operation.
+ This parameter can be a value of @ref RTC_StoreOperation_Definitions */
+} RTC_TimeTypeDef;
+
+/**
+ * @brief RTC Date structure definition
+ */
+typedef struct
+{
+ uint8_t WeekDay; /*!< Specifies the RTC Date WeekDay.
+ This parameter can be a value of @ref RTC_WeekDay_Definitions */
+
+ uint8_t Month; /*!< Specifies the RTC Date Month (in BCD format).
+ This parameter can be a value of @ref RTC_Month_Date_Definitions */
+
+ uint8_t Date; /*!< Specifies the RTC Date.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 31 */
+
+ uint8_t Year; /*!< Specifies the RTC Date Year.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 99 */
+
+} RTC_DateTypeDef;
+
+/**
+ * @brief RTC Alarm structure definition
+ */
+typedef struct
+{
+ RTC_TimeTypeDef AlarmTime; /*!< Specifies the RTC Alarm Time members */
+
+ uint32_t AlarmMask; /*!< Specifies the RTC Alarm Masks.
+ This parameter can be a value of @ref RTC_AlarmMask_Definitions */
+
+ uint32_t AlarmSubSecondMask; /*!< Specifies the RTC Alarm SubSeconds Masks.
+ This parameter can be a value of @ref RTC_Alarm_Sub_Seconds_Masks_Definitions */
+
+ uint32_t AlarmDateWeekDaySel; /*!< Specifies the RTC Alarm is on Date or WeekDay.
+ This parameter can be a value of @ref RTC_AlarmDateWeekDay_Definitions */
+
+ uint8_t AlarmDateWeekDay; /*!< Specifies the RTC Alarm Date/WeekDay.
+ If the Alarm Date is selected, this parameter must be set to a value in the 1-31 range.
+ If the Alarm WeekDay is selected, this parameter can be a value of @ref RTC_WeekDay_Definitions */
+
+ uint32_t Alarm; /*!< Specifies the alarm .
+ This parameter can be a value of @ref RTC_Alarms_Definitions */
+} RTC_AlarmTypeDef;
+
+/**
+ * @brief RTC Handle Structure definition
+ */
+#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
+typedef struct __RTC_HandleTypeDef
+#else
+typedef struct
+#endif /* (USE_HAL_RTC_REGISTER_CALLBACKS) */
+{
+ RTC_TypeDef *Instance; /*!< Register base address */
+
+ RTC_InitTypeDef Init; /*!< RTC required parameters */
+
+ HAL_LockTypeDef Lock; /*!< RTC locking object */
+
+ __IO HAL_RTCStateTypeDef State; /*!< Time communication state */
+
+#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
+ void (* AlarmAEventCallback)(struct __RTC_HandleTypeDef *hrtc); /*!< RTC Alarm A Event callback */
+
+ void (* TimeStampEventCallback)(struct __RTC_HandleTypeDef *hrtc); /*!< RTC TimeStamp Event callback */
+
+#if defined(RTC_WAKEUP_SUPPORT)
+ void (* WakeUpTimerEventCallback)(struct __RTC_HandleTypeDef *hrtc); /*!< RTC WakeUpTimer Event callback */
+
+#endif /* RTC_WAKEUP_SUPPORT */
+ void (* Tamper1EventCallback)(struct __RTC_HandleTypeDef *hrtc); /*!< RTC Tamper 1 Event callback */
+
+ void (* Tamper2EventCallback)(struct __RTC_HandleTypeDef *hrtc); /*!< RTC Tamper 2 Event callback */
+
+#if defined(RTC_TAMPER3_SUPPORT)
+ void (* Tamper3EventCallback)(struct __RTC_HandleTypeDef *hrtc); /*!< RTC Tamper 3 Event callback */
+
+#endif /* RTC_TAMPER3_SUPPORT */
+ void (* MspInitCallback)(struct __RTC_HandleTypeDef *hrtc); /*!< RTC Msp Init callback */
+
+ void (* MspDeInitCallback)(struct __RTC_HandleTypeDef *hrtc); /*!< RTC Msp DeInit callback */
+
+#endif /* (USE_HAL_RTC_REGISTER_CALLBACKS) */
+
+} RTC_HandleTypeDef;
+
+#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
+/**
+ * @brief HAL RTC Callback ID enumeration definition
+ */
+typedef enum
+{
+ HAL_RTC_ALARM_A_EVENT_CB_ID = 0x00u, /*!< RTC Alarm A Event Callback ID */
+ HAL_RTC_TIMESTAMP_EVENT_CB_ID = 0x02u, /*!< RTC TimeStamp Event Callback ID */
+#if defined(RTC_WAKEUP_SUPPORT)
+ HAL_RTC_WAKEUPTIMER_EVENT_CB_ID = 0x03u, /*!< RTC WakeUp Timer Event Callback ID */
+#endif /* RTC_WAKEUP_SUPPORT */
+ HAL_RTC_TAMPER1_EVENT_CB_ID = 0x04u, /*!< RTC Tamper 1 Callback ID */
+ HAL_RTC_TAMPER2_EVENT_CB_ID = 0x05u, /*!< RTC Tamper 2 Callback ID */
+#if defined(RTC_TAMPER3_SUPPORT)
+ HAL_RTC_TAMPER3_EVENT_CB_ID = 0x06u, /*!< RTC Tamper 3 Callback ID */
+#endif /* RTC_TAMPER3_SUPPORT */
+ HAL_RTC_MSPINIT_CB_ID = 0x0Eu, /*!< RTC Msp Init callback ID */
+ HAL_RTC_MSPDEINIT_CB_ID = 0x0Fu /*!< RTC Msp DeInit callback ID */
+} HAL_RTC_CallbackIDTypeDef;
+
+/**
+ * @brief HAL RTC Callback pointer definition
+ */
+typedef void (*pRTC_CallbackTypeDef)(RTC_HandleTypeDef *hrtc); /*!< pointer to an RTC callback function */
+#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup RTC_Exported_Constants RTC Exported Constants
+ * @{
+ */
+
+/** @defgroup RTC_Hour_Formats RTC Hour Formats
+ * @{
+ */
+#define RTC_HOURFORMAT_24 0x00000000U
+#define RTC_HOURFORMAT_12 0x00000040U
+
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Output_Polarity_Definitions RTC Output Polarity Definitions
+ * @{
+ */
+#define RTC_OUTPUT_POLARITY_HIGH 0x00000000U
+#define RTC_OUTPUT_POLARITY_LOW 0x00100000U
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Output_Type_ALARM_OUT RTC Output Type ALARM OUT
+ * @{
+ */
+#define RTC_OUTPUT_TYPE_OPENDRAIN 0x00000000U
+#define RTC_OUTPUT_TYPE_PUSHPULL 0x00040000U
+/**
+ * @}
+ */
+
+/** @defgroup RTC_AM_PM_Definitions RTC AM PM Definitions
+ * @{
+ */
+#define RTC_HOURFORMAT12_AM ((uint8_t)0x00)
+#define RTC_HOURFORMAT12_PM ((uint8_t)0x40)
+/**
+ * @}
+ */
+
+/** @defgroup RTC_DayLightSaving_Definitions RTC DayLight Saving Definitions
+ * @{
+ */
+#define RTC_DAYLIGHTSAVING_SUB1H 0x00020000U
+#define RTC_DAYLIGHTSAVING_ADD1H 0x00010000U
+#define RTC_DAYLIGHTSAVING_NONE 0x00000000U
+/**
+ * @}
+ */
+
+/** @defgroup RTC_StoreOperation_Definitions RTC Store Operation Definitions
+ * @{
+ */
+#define RTC_STOREOPERATION_RESET 0x00000000U
+#define RTC_STOREOPERATION_SET 0x00040000U
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Input_parameter_format_definitions RTC Input parameter format definitions
+ * @{
+ */
+#define RTC_FORMAT_BIN 0x000000000U
+#define RTC_FORMAT_BCD 0x000000001U
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Month_Date_Definitions RTC Month Date Definitions
+ * @{
+ */
+/* Coded in BCD format */
+#define RTC_MONTH_JANUARY ((uint8_t)0x01)
+#define RTC_MONTH_FEBRUARY ((uint8_t)0x02)
+#define RTC_MONTH_MARCH ((uint8_t)0x03)
+#define RTC_MONTH_APRIL ((uint8_t)0x04)
+#define RTC_MONTH_MAY ((uint8_t)0x05)
+#define RTC_MONTH_JUNE ((uint8_t)0x06)
+#define RTC_MONTH_JULY ((uint8_t)0x07)
+#define RTC_MONTH_AUGUST ((uint8_t)0x08)
+#define RTC_MONTH_SEPTEMBER ((uint8_t)0x09)
+#define RTC_MONTH_OCTOBER ((uint8_t)0x10)
+#define RTC_MONTH_NOVEMBER ((uint8_t)0x11)
+#define RTC_MONTH_DECEMBER ((uint8_t)0x12)
+/**
+ * @}
+ */
+
+/** @defgroup RTC_WeekDay_Definitions RTC WeekDay Definitions
+ * @{
+ */
+#define RTC_WEEKDAY_MONDAY ((uint8_t)0x01)
+#define RTC_WEEKDAY_TUESDAY ((uint8_t)0x02)
+#define RTC_WEEKDAY_WEDNESDAY ((uint8_t)0x03)
+#define RTC_WEEKDAY_THURSDAY ((uint8_t)0x04)
+#define RTC_WEEKDAY_FRIDAY ((uint8_t)0x05)
+#define RTC_WEEKDAY_SATURDAY ((uint8_t)0x06)
+#define RTC_WEEKDAY_SUNDAY ((uint8_t)0x07)
+/**
+ * @}
+ */
+
+/** @defgroup RTC_AlarmDateWeekDay_Definitions RTC Alarm Date WeekDay Definitions
+ * @{
+ */
+#define RTC_ALARMDATEWEEKDAYSEL_DATE 0x00000000U
+#define RTC_ALARMDATEWEEKDAYSEL_WEEKDAY 0x40000000U
+/**
+ * @}
+ */
+
+/** @defgroup RTC_AlarmMask_Definitions RTC Alarm Mask Definitions
+ * @{
+ */
+#define RTC_ALARMMASK_NONE 0x00000000U
+#define RTC_ALARMMASK_DATEWEEKDAY RTC_ALRMAR_MSK4
+#define RTC_ALARMMASK_HOURS RTC_ALRMAR_MSK3
+#define RTC_ALARMMASK_MINUTES RTC_ALRMAR_MSK2
+#define RTC_ALARMMASK_SECONDS RTC_ALRMAR_MSK1
+#define RTC_ALARMMASK_ALL 0x80808080U
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Alarms_Definitions RTC Alarms Definitions
+ * @{
+ */
+#define RTC_ALARM_A RTC_CR_ALRAE
+
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Alarm_Sub_Seconds_Masks_Definitions RTC Alarm Sub Seconds Masks Definitions
+ * @{
+ */
+#define RTC_ALARMSUBSECONDMASK_ALL 0x00000000U /*!< All Alarm SS fields are masked.
+ There is no comparison on sub seconds
+ for Alarm */
+#define RTC_ALARMSUBSECONDMASK_SS14_1 0x01000000U /*!< SS[14:1] are don't care in Alarm
+ comparison. Only SS[0] is compared. */
+#define RTC_ALARMSUBSECONDMASK_SS14_2 0x02000000U /*!< SS[14:2] are don't care in Alarm
+ comparison. Only SS[1:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_3 0x03000000U /*!< SS[14:3] are don't care in Alarm
+ comparison. Only SS[2:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_4 0x04000000U /*!< SS[14:4] are don't care in Alarm
+ comparison. Only SS[3:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_5 0x05000000U /*!< SS[14:5] are don't care in Alarm
+ comparison. Only SS[4:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_6 0x06000000U /*!< SS[14:6] are don't care in Alarm
+ comparison. Only SS[5:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_7 0x07000000U /*!< SS[14:7] are don't care in Alarm
+ comparison. Only SS[6:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_8 0x08000000U /*!< SS[14:8] are don't care in Alarm
+ comparison. Only SS[7:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_9 0x09000000U /*!< SS[14:9] are don't care in Alarm
+ comparison. Only SS[8:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_10 0x0A000000U /*!< SS[14:10] are don't care in Alarm
+ comparison. Only SS[9:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_11 0x0B000000U /*!< SS[14:11] are don't care in Alarm
+ comparison. Only SS[10:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_12 0x0C000000U /*!< SS[14:12] are don't care in Alarm
+ comparison.Only SS[11:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_13 0x0D000000U /*!< SS[14:13] are don't care in Alarm
+ comparison. Only SS[12:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14 0x0E000000U /*!< SS[14] is don't care in Alarm
+ comparison.Only SS[13:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_NONE 0x0F000000U /*!< SS[14:0] are compared and must match
+ to activate alarm. */
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Interrupts_Definitions RTC Interrupts Definitions
+ * @{
+ */
+#define RTC_IT_TS 0x00008000U
+#define RTC_IT_WUT 0x00004000U
+#define RTC_IT_ALRA 0x00001000U
+#define RTC_IT_TAMP 0x00000004U /* Used only to Enable the Tamper Interrupt */
+#define RTC_IT_TAMP1 0x00020000U /*only for RTC_ISR flag check*/
+#define RTC_IT_TAMP2 0x00040000U /*only for RTC_ISR flag check*/
+#define RTC_IT_TAMP3 0x00080000U /*only for RTC_ISR flag check*/
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Flags_Definitions RTC Flags Definitions
+ * @{
+ */
+#define RTC_FLAG_RECALPF 0x00010000U
+#define RTC_FLAG_TAMP3F 0x00008000U
+#define RTC_FLAG_TAMP2F 0x00004000U
+#define RTC_FLAG_TAMP1F 0x00002000U
+#define RTC_FLAG_TSOVF 0x00001000U
+#define RTC_FLAG_TSF 0x00000800U
+#define RTC_FLAG_WUTF 0x00000400U
+#define RTC_FLAG_ALRAF 0x00000100U
+#define RTC_FLAG_INITF 0x00000040U
+#define RTC_FLAG_RSF 0x00000020U
+#define RTC_FLAG_INITS 0x00000010U
+#define RTC_FLAG_SHPF 0x00000008U
+#define RTC_FLAG_WUTWF 0x00000004U
+#define RTC_FLAG_ALRAWF 0x00000001U
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros ------------------------------------------------------------*/
+/** @defgroup RTC_Exported_Macros RTC Exported Macros
+ * @{
+ */
+
+/** @brief Reset RTC handle state
+ * @param __HANDLE__ RTC handle.
+ * @retval None
+ */
+#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
+#define __HAL_RTC_RESET_HANDLE_STATE(__HANDLE__) do{\
+ (__HANDLE__)->State = HAL_RTC_STATE_RESET;\
+ (__HANDLE__)->MspInitCallback = NULL;\
+ (__HANDLE__)->MspDeInitCallback = NULL;\
+ }while(0u)
+#else
+#define __HAL_RTC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_RTC_STATE_RESET)
+#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */
+
+/**
+ * @brief Disable the write protection for RTC registers.
+ * @param __HANDLE__ specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_WRITEPROTECTION_DISABLE(__HANDLE__) \
+ do{ \
+ (__HANDLE__)->Instance->WPR = 0xCAU; \
+ (__HANDLE__)->Instance->WPR = 0x53U; \
+ } while(0)
+
+/**
+ * @brief Enable the write protection for RTC registers.
+ * @param __HANDLE__ specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_WRITEPROTECTION_ENABLE(__HANDLE__) \
+ do{ \
+ (__HANDLE__)->Instance->WPR = 0xFFU; \
+ } while(0)
+
+/**
+ * @brief Enable the RTC ALARMA peripheral.
+ * @param __HANDLE__ specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_ALARMA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_ALRAE))
+
+/**
+ * @brief Disable the RTC ALARMA peripheral.
+ * @param __HANDLE__ specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_ALARMA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_ALRAE))
+
+/**
+ * @brief Enable the RTC Alarm interrupt.
+ * @param __HANDLE__ specifies the RTC handle.
+ * @param __INTERRUPT__ specifies the RTC Alarm interrupt sources to be enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg RTC_IT_ALRA: Alarm A interrupt
+ * @retval None
+ */
+#define __HAL_RTC_ALARM_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the RTC Alarm interrupt.
+ * @param __HANDLE__ specifies the RTC handle.
+ * @param __INTERRUPT__ specifies the RTC Alarm interrupt sources to be enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg RTC_IT_ALRA: Alarm A interrupt
+ * @retval None
+ */
+#define __HAL_RTC_ALARM_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
+
+/**
+ * @brief Check whether the specified RTC Alarm interrupt has occurred or not.
+ * @param __HANDLE__ specifies the RTC handle.
+ * @param __INTERRUPT__ specifies the RTC Alarm interrupt to check.
+ * This parameter can be:
+ * @arg RTC_IT_ALRA: Alarm A interrupt
+ * @retval None
+ */
+#define __HAL_RTC_ALARM_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR)& ((__INTERRUPT__)>> 4U)) != RESET)? SET : RESET)
+
+/**
+ * @brief Check whether the specified RTC Alarm interrupt has been enabled or not.
+ * @param __HANDLE__ specifies the RTC handle.
+ * @param __INTERRUPT__ specifies the RTC Alarm interrupt sources to check.
+ * This parameter can be:
+ * @arg RTC_IT_ALRA: Alarm A interrupt
+ * @retval None
+ */
+#define __HAL_RTC_ALARM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != RESET) ? SET : RESET)
+
+/**
+ * @brief Get the selected RTC Alarm's flag status.
+ * @param __HANDLE__ specifies the RTC handle.
+ * @param __FLAG__ specifies the RTC Alarm Flag sources to check.
+ * This parameter can be:
+ * @arg RTC_FLAG_ALRAF
+ * @arg RTC_FLAG_ALRAWF
+ * @retval None
+ */
+#define __HAL_RTC_ALARM_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
+
+/**
+ * @brief Clear the RTC Alarm's pending flags.
+ * @param __HANDLE__ specifies the RTC handle.
+ * @param __FLAG__ specifies the RTC Alarm Flag sources to clear.
+ * This parameter can be:
+ * @arg RTC_FLAG_ALRAF
+ * @retval None
+ */
+#define __HAL_RTC_ALARM_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT) | ((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
+
+/**
+ * @brief Enable interrupt on the RTC Alarm associated Exti line.
+ * @retval None
+ */
+#define __HAL_RTC_ALARM_EXTI_ENABLE_IT() (EXTI->IMR |= RTC_EXTI_LINE_ALARM_EVENT)
+
+/**
+ * @brief Disable interrupt on the RTC Alarm associated Exti line.
+ * @retval None
+ */
+#define __HAL_RTC_ALARM_EXTI_DISABLE_IT() (EXTI->IMR &= ~(RTC_EXTI_LINE_ALARM_EVENT))
+
+/**
+ * @brief Enable event on the RTC Alarm associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_ALARM_EXTI_ENABLE_EVENT() (EXTI->EMR |= RTC_EXTI_LINE_ALARM_EVENT)
+
+/**
+ * @brief Disable event on the RTC Alarm associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_ALARM_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(RTC_EXTI_LINE_ALARM_EVENT))
+
+/**
+ * @brief Enable falling edge trigger on the RTC Alarm associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_ALARM_EXTI_ENABLE_FALLING_EDGE() (EXTI->FTSR |= RTC_EXTI_LINE_ALARM_EVENT)
+
+/**
+ * @brief Disable falling edge trigger on the RTC Alarm associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_ALARM_EXTI_DISABLE_FALLING_EDGE() (EXTI->FTSR &= ~(RTC_EXTI_LINE_ALARM_EVENT))
+
+/**
+ * @brief Enable rising edge trigger on the RTC Alarm associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_ALARM_EXTI_ENABLE_RISING_EDGE() (EXTI->RTSR |= RTC_EXTI_LINE_ALARM_EVENT)
+
+/**
+ * @brief Disable rising edge trigger on the RTC Alarm associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_ALARM_EXTI_DISABLE_RISING_EDGE() (EXTI->RTSR &= ~(RTC_EXTI_LINE_ALARM_EVENT))
+
+/**
+ * @brief Enable rising & falling edge trigger on the RTC Alarm associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_ALARM_EXTI_ENABLE_RISING_FALLING_EDGE() __HAL_RTC_ALARM_EXTI_ENABLE_RISING_EDGE();__HAL_RTC_ALARM_EXTI_ENABLE_FALLING_EDGE();
+
+/**
+ * @brief Disable rising & falling edge trigger on the RTC Alarm associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_ALARM_EXTI_DISABLE_RISING_FALLING_EDGE() __HAL_RTC_ALARM_EXTI_DISABLE_RISING_EDGE();__HAL_RTC_ALARM_EXTI_DISABLE_FALLING_EDGE();
+
+/**
+ * @brief Check whether the RTC Alarm associated Exti line interrupt flag is set or not.
+ * @retval Line Status.
+ */
+#define __HAL_RTC_ALARM_EXTI_GET_FLAG() (EXTI->PR & RTC_EXTI_LINE_ALARM_EVENT)
+
+/**
+ * @brief Clear the RTC Alarm associated Exti line flag.
+ * @retval None.
+ */
+#define __HAL_RTC_ALARM_EXTI_CLEAR_FLAG() (EXTI->PR = RTC_EXTI_LINE_ALARM_EVENT)
+
+/**
+ * @brief Generate a Software interrupt on RTC Alarm associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_ALARM_EXTI_GENERATE_SWIT() (EXTI->SWIER |= RTC_EXTI_LINE_ALARM_EVENT)
+/**
+ * @}
+ */
+
+/* Include RTC HAL Extended module */
+#include "stm32f0xx_hal_rtc_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup RTC_Exported_Functions RTC Exported Functions
+ * @{
+ */
+
+/** @defgroup RTC_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+
+/* Initialization and de-initialization functions ****************************/
+HAL_StatusTypeDef HAL_RTC_Init(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTC_DeInit(RTC_HandleTypeDef *hrtc);
+void HAL_RTC_MspInit(RTC_HandleTypeDef *hrtc);
+void HAL_RTC_MspDeInit(RTC_HandleTypeDef *hrtc);
+
+/* Callbacks Register/UnRegister functions ***********************************/
+#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
+HAL_StatusTypeDef HAL_RTC_RegisterCallback(RTC_HandleTypeDef *hrtc, HAL_RTC_CallbackIDTypeDef CallbackID, pRTC_CallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_RTC_UnRegisterCallback(RTC_HandleTypeDef *hrtc, HAL_RTC_CallbackIDTypeDef CallbackID);
+#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Exported_Functions_Group2 RTC Time and Date functions
+ * @{
+ */
+
+/* RTC Time and Date functions ************************************************/
+HAL_StatusTypeDef HAL_RTC_SetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format);
+HAL_StatusTypeDef HAL_RTC_GetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format);
+HAL_StatusTypeDef HAL_RTC_SetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format);
+HAL_StatusTypeDef HAL_RTC_GetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format);
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Exported_Functions_Group3 RTC Alarm functions
+ * @{
+ */
+/* RTC Alarm functions ********************************************************/
+HAL_StatusTypeDef HAL_RTC_SetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format);
+HAL_StatusTypeDef HAL_RTC_SetAlarm_IT(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format);
+HAL_StatusTypeDef HAL_RTC_DeactivateAlarm(RTC_HandleTypeDef *hrtc, uint32_t Alarm);
+HAL_StatusTypeDef HAL_RTC_GetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Alarm, uint32_t Format);
+void HAL_RTC_AlarmIRQHandler(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTC_PollForAlarmAEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+void HAL_RTC_AlarmAEventCallback(RTC_HandleTypeDef *hrtc);
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Exported_Functions_Group4 Peripheral Control functions
+ * @{
+ */
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef HAL_RTC_WaitForSynchro(RTC_HandleTypeDef *hrtc);
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Exported_Functions_Group5 Peripheral State functions
+ * @{
+ */
+/* Peripheral State functions *************************************************/
+HAL_RTCStateTypeDef HAL_RTC_GetState(RTC_HandleTypeDef *hrtc);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup RTC_Private_Constants RTC Private Constants
+ * @{
+ */
+/* Masks Definition */
+#define RTC_TR_RESERVED_MASK 0x007F7F7FU
+#define RTC_DR_RESERVED_MASK 0x00FFFF3FU
+#define RTC_INIT_MASK 0xFFFFFFFFU
+#define RTC_RSF_MASK 0xFFFFFF5FU
+#define RTC_FLAGS_MASK ((uint32_t) (RTC_FLAG_RECALPF | RTC_FLAG_TAMP3F | RTC_FLAG_TAMP2F | \
+ RTC_FLAG_TAMP1F| RTC_FLAG_TSOVF | RTC_FLAG_TSF | \
+ RTC_FLAG_WUTF | RTC_FLAG_ALRAF | \
+ RTC_FLAG_INITF | RTC_FLAG_RSF | RTC_FLAG_INITS | \
+ RTC_FLAG_SHPF | RTC_FLAG_WUTWF | RTC_FLAG_ALRAWF))
+
+#define RTC_TIMEOUT_VALUE 1000U
+
+#define RTC_EXTI_LINE_ALARM_EVENT ((uint32_t)EXTI_IMR_MR17) /*!< External interrupt line 17 Connected to the RTC Alarm event */
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup RTC_Private_Macros RTC Private Macros
+ * @{
+ */
+
+/** @defgroup RTC_IS_RTC_Definitions RTC Private macros to check input parameters
+ * @{
+ */
+#define IS_RTC_HOUR_FORMAT(FORMAT) (((FORMAT) == RTC_HOURFORMAT_12) || \
+ ((FORMAT) == RTC_HOURFORMAT_24))
+
+#define IS_RTC_OUTPUT_POL(POL) (((POL) == RTC_OUTPUT_POLARITY_HIGH) || \
+ ((POL) == RTC_OUTPUT_POLARITY_LOW))
+#define IS_RTC_OUTPUT_TYPE(TYPE) (((TYPE) == RTC_OUTPUT_TYPE_OPENDRAIN) || \
+ ((TYPE) == RTC_OUTPUT_TYPE_PUSHPULL))
+#define IS_RTC_HOUR12(HOUR) (((HOUR) > 0U) && ((HOUR) <= 12U))
+#define IS_RTC_HOUR24(HOUR) ((HOUR) <= 23U)
+#define IS_RTC_ASYNCH_PREDIV(PREDIV) ((PREDIV) <= 0x7FU)
+#define IS_RTC_SYNCH_PREDIV(PREDIV) ((PREDIV) <= 0x7FFFU)
+#define IS_RTC_MINUTES(MINUTES) ((MINUTES) <= 59U)
+#define IS_RTC_SECONDS(SECONDS) ((SECONDS) <= 59U)
+
+#define IS_RTC_HOURFORMAT12(PM) (((PM) == RTC_HOURFORMAT12_AM) || \
+ ((PM) == RTC_HOURFORMAT12_PM))
+
+#define IS_RTC_DAYLIGHT_SAVING(SAVE) (((SAVE) == RTC_DAYLIGHTSAVING_SUB1H) || \
+ ((SAVE) == RTC_DAYLIGHTSAVING_ADD1H) || \
+ ((SAVE) == RTC_DAYLIGHTSAVING_NONE))
+#define IS_RTC_STORE_OPERATION(OPERATION) (((OPERATION) == RTC_STOREOPERATION_RESET) || \
+ ((OPERATION) == RTC_STOREOPERATION_SET))
+#define IS_RTC_FORMAT(FORMAT) (((FORMAT) == RTC_FORMAT_BIN) || ((FORMAT) == RTC_FORMAT_BCD))
+#define IS_RTC_YEAR(YEAR) ((YEAR) <= 99U)
+#define IS_RTC_MONTH(MONTH) (((MONTH) >= 1U) && ((MONTH) <= 12U))
+#define IS_RTC_DATE(DATE) (((DATE) >= 1U) && ((DATE) <= 31U))
+#define IS_RTC_WEEKDAY(WEEKDAY) (((WEEKDAY) == RTC_WEEKDAY_MONDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_TUESDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_WEDNESDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_THURSDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_FRIDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_SATURDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_SUNDAY))
+#define IS_RTC_ALARM_DATE_WEEKDAY_DATE(DATE) (((DATE) > 0U) && ((DATE) <= 31U))
+#define IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(WEEKDAY) (((WEEKDAY) == RTC_WEEKDAY_MONDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_TUESDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_WEDNESDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_THURSDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_FRIDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_SATURDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_SUNDAY))
+#define IS_RTC_ALARM_DATE_WEEKDAY_SEL(SEL) (((SEL) == RTC_ALARMDATEWEEKDAYSEL_DATE) || \
+ ((SEL) == RTC_ALARMDATEWEEKDAYSEL_WEEKDAY))
+#define IS_RTC_ALARM_MASK(MASK) (((MASK) & 0x7F7F7F7FU) == (uint32_t)RESET)
+#define IS_RTC_ALARM(ALARM) ((ALARM) == RTC_ALARM_A)
+#define IS_RTC_ALARM_SUB_SECOND_VALUE(VALUE) ((VALUE) <= 0x00007FFFU)
+
+#define IS_RTC_ALARM_SUB_SECOND_MASK(MASK) (((MASK) == RTC_ALARMSUBSECONDMASK_ALL) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_1) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_2) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_3) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_4) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_5) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_6) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_7) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_8) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_9) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_10) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_11) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_12) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_13) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_NONE))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup RTC_Private_Functions RTC Private Functions
+ * @{
+ */
+HAL_StatusTypeDef RTC_EnterInitMode(RTC_HandleTypeDef *hrtc);
+uint8_t RTC_ByteToBcd2(uint8_t Value);
+uint8_t RTC_Bcd2ToByte(uint8_t Value);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_RTC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rtc_ex.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rtc_ex.h
new file mode 100644
index 0000000..6cdc954
--- /dev/null
+++ b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rtc_ex.h
@@ -0,0 +1,1048 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_rtc_ex.h
+ * @author MCD Application Team
+ * @brief Header file of RTC HAL Extended module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_RTC_EX_H
+#define __STM32F0xx_HAL_RTC_EX_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup RTCEx RTCEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup RTCEx_Exported_Types RTCEx Exported Types
+ * @{
+ */
+
+/**
+ * @brief RTC Tamper structure definition
+ */
+typedef struct
+{
+ uint32_t Tamper; /*!< Specifies the Tamper Pin.
+ This parameter can be a value of @ref RTCEx_Tamper_Pins_Definitions */
+
+ uint32_t Trigger; /*!< Specifies the Tamper Trigger.
+ This parameter can be a value of @ref RTCEx_Tamper_Trigger_Definitions */
+
+ uint32_t Filter; /*!< Specifies the RTC Filter Tamper.
+ This parameter can be a value of @ref RTCEx_Tamper_Filter_Definitions */
+
+ uint32_t SamplingFrequency; /*!< Specifies the sampling frequency.
+ This parameter can be a value of @ref RTCEx_Tamper_Sampling_Frequencies_Definitions */
+
+ uint32_t PrechargeDuration; /*!< Specifies the Precharge Duration .
+ This parameter can be a value of @ref RTCEx_Tamper_Pin_Precharge_Duration_Definitions */
+
+ uint32_t TamperPullUp; /*!< Specifies the Tamper PullUp .
+ This parameter can be a value of @ref RTCEx_Tamper_Pull_UP_Definitions */
+
+ uint32_t TimeStampOnTamperDetection; /*!< Specifies the TimeStampOnTamperDetection.
+ This parameter can be a value of @ref RTCEx_Tamper_TimeStampOnTamperDetection_Definitions */
+} RTC_TamperTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup RTCEx_Exported_Constants RTCEx Exported Constants
+ * @{
+ */
+
+/** @defgroup RTCEx_Output_selection_Definitions RTCEx Output Selection Definition
+ * @{
+ */
+#define RTC_OUTPUT_DISABLE 0x00000000U
+#define RTC_OUTPUT_ALARMA 0x00200000U
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
+#define RTC_OUTPUT_WAKEUP 0x00600000U
+#endif
+
+/**
+ * @}
+ */
+
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F030xC) && !defined(STM32F070x6) && !defined(STM32F070xB)
+/** @defgroup RTCEx_Backup_Registers_Definitions RTCEx Backup Registers Definition
+ * @{
+ */
+#define RTC_BKP_DR0 0x00000000U
+#define RTC_BKP_DR1 0x00000001U
+#define RTC_BKP_DR2 0x00000002U
+#define RTC_BKP_DR3 0x00000003U
+#define RTC_BKP_DR4 0x00000004U
+/**
+ * @}
+ */
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F030xC) && !defined(STM32F070x6) && !defined(STM32F070xB) */
+
+/** @defgroup RTCEx_Time_Stamp_Edges_definitions RTCEx Time Stamp Edges definition
+ * @{
+ */
+#define RTC_TIMESTAMPEDGE_RISING 0x00000000U
+#define RTC_TIMESTAMPEDGE_FALLING 0x00000008U
+
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_TimeStamp_Pin_Selections RTCEx TimeStamp Pin Selection
+ * @{
+ */
+#define RTC_TIMESTAMPPIN_DEFAULT 0x00000000U
+
+/**
+ * @}
+ */
+
+
+/** @defgroup RTCEx_Tamper_Pins_Definitions RTCEx Tamper Pins Definition
+ * @{
+ */
+#define RTC_TAMPER_1 RTC_TAFCR_TAMP1E
+#define RTC_TAMPER_2 RTC_TAFCR_TAMP2E
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
+#define RTC_TAMPER_3 RTC_TAFCR_TAMP3E
+#endif
+
+/**
+ * @}
+ */
+
+
+
+/** @defgroup RTCEx_Tamper_Trigger_Definitions RTCEx Tamper Trigger Definition
+ * @{
+ */
+#define RTC_TAMPERTRIGGER_RISINGEDGE 0x00000000U
+#define RTC_TAMPERTRIGGER_FALLINGEDGE 0x00000002U
+#define RTC_TAMPERTRIGGER_LOWLEVEL RTC_TAMPERTRIGGER_RISINGEDGE
+#define RTC_TAMPERTRIGGER_HIGHLEVEL RTC_TAMPERTRIGGER_FALLINGEDGE
+
+
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Tamper_Filter_Definitions RTCEx Tamper Filter Definition
+ * @{
+ */
+#define RTC_TAMPERFILTER_DISABLE 0x00000000U /*!< Tamper filter is disabled */
+
+#define RTC_TAMPERFILTER_2SAMPLE 0x00000800U /*!< Tamper is activated after 2
+ consecutive samples at the active level */
+#define RTC_TAMPERFILTER_4SAMPLE 0x00001000U /*!< Tamper is activated after 4
+ consecutive samples at the active level */
+#define RTC_TAMPERFILTER_8SAMPLE 0x00001800U /*!< Tamper is activated after 8
+ consecutive samples at the active level. */
+
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Tamper_Sampling_Frequencies_Definitions RTCEx Tamper Sampling Frequencies Definition
+ * @{
+ */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768 0x00000000U /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 32768 */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384 0x00000100U /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 16384 */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192 0x00000200U /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 8192 */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096 0x00000300U /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 4096 */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048 0x00000400U /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 2048 */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024 0x00000500U /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 1024 */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512 0x00000600U /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 512 */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256 0x00000700U /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 256 */
+
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Tamper_Pin_Precharge_Duration_Definitions RTCEx Tamper Pin Precharge Duration Definition
+ * @{
+ */
+#define RTC_TAMPERPRECHARGEDURATION_1RTCCLK 0x00000000U /*!< Tamper pins are pre-charged before
+ sampling during 1 RTCCLK cycle */
+#define RTC_TAMPERPRECHARGEDURATION_2RTCCLK 0x00002000U /*!< Tamper pins are pre-charged before
+ sampling during 2 RTCCLK cycles */
+#define RTC_TAMPERPRECHARGEDURATION_4RTCCLK 0x00004000U /*!< Tamper pins are pre-charged before
+ sampling during 4 RTCCLK cycles */
+#define RTC_TAMPERPRECHARGEDURATION_8RTCCLK 0x00006000U /*!< Tamper pins are pre-charged before
+ sampling during 8 RTCCLK cycles */
+
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Tamper_TimeStampOnTamperDetection_Definitions RTCEx Tamper TimeStampOnTamperDetection Definition
+ * @{
+ */
+#define RTC_TIMESTAMPONTAMPERDETECTION_ENABLE ((uint32_t)RTC_TAFCR_TAMPTS) /*!< TimeStamp on Tamper Detection event saved */
+#define RTC_TIMESTAMPONTAMPERDETECTION_DISABLE 0x00000000U /*!< TimeStamp on Tamper Detection event is not saved */
+
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Tamper_Pull_UP_Definitions RTCEx Tamper Pull UP Definition
+ * @{
+ */
+#define RTC_TAMPER_PULLUP_ENABLE 0x00000000U /*!< Tamper pins are pre-charged before sampling */
+#define RTC_TAMPER_PULLUP_DISABLE ((uint32_t)RTC_TAFCR_TAMPPUDIS) /*!< Tamper pins are not pre-charged before sampling */
+
+/**
+ * @}
+ */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
+/** @defgroup RTCEx_Wakeup_Timer_Definitions RTCEx Wakeup Timer Definition
+ * @{
+ */
+#define RTC_WAKEUPCLOCK_RTCCLK_DIV16 0x00000000U
+#define RTC_WAKEUPCLOCK_RTCCLK_DIV8 0x00000001U
+#define RTC_WAKEUPCLOCK_RTCCLK_DIV4 0x00000002U
+#define RTC_WAKEUPCLOCK_RTCCLK_DIV2 0x00000003U
+#define RTC_WAKEUPCLOCK_CK_SPRE_16BITS 0x00000004U
+#define RTC_WAKEUPCLOCK_CK_SPRE_17BITS 0x00000006U
+
+
+/**
+ * @}
+ */
+#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) */
+
+/** @defgroup RTCEx_Smooth_calib_period_Definitions RTCEx Smooth calib period Definition
+ * @{
+ */
+#define RTC_SMOOTHCALIB_PERIOD_32SEC 0x00000000U /*!< If RTCCLK = 32768 Hz, Smooth calibation
+ period is 32s, else 2exp20 RTCCLK seconds */
+#define RTC_SMOOTHCALIB_PERIOD_16SEC 0x00002000U /*!< If RTCCLK = 32768 Hz, Smooth calibation
+ period is 16s, else 2exp19 RTCCLK seconds */
+#define RTC_SMOOTHCALIB_PERIOD_8SEC 0x00004000U /*!< If RTCCLK = 32768 Hz, Smooth calibation
+ period is 8s, else 2exp18 RTCCLK seconds */
+
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Smooth_calib_Plus_pulses_Definitions RTCEx Smooth calib Plus pulses Definition
+ * @{
+ */
+#define RTC_SMOOTHCALIB_PLUSPULSES_SET 0x00008000U /*!< The number of RTCCLK pulses added
+ during a X -second window = Y - CALM[8:0]
+ with Y = 512, 256, 128 when X = 32, 16, 8 */
+#define RTC_SMOOTHCALIB_PLUSPULSES_RESET 0x00000000U /*!< The number of RTCCLK pulses subbstited
+ during a 32-second window = CALM[8:0] */
+
+/**
+ * @}
+ */
+/** @defgroup RTCEx_Calib_Output_selection_Definitions RTCEx Calib Output selection Definitions
+ * @{
+ */
+#define RTC_CALIBOUTPUT_512HZ 0x00000000U
+#define RTC_CALIBOUTPUT_1HZ 0x00080000U
+
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Add_1_Second_Parameter_Definition RTCEx Add 1 Second Parameter Definition
+ * @{
+ */
+#define RTC_SHIFTADD1S_RESET 0x00000000U
+#define RTC_SHIFTADD1S_SET 0x80000000U
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup RTCEx_Exported_Macros RTCEx Exported Macros
+ * @{
+ */
+
+/* ---------------------------------WAKEUPTIMER---------------------------------*/
+/** @defgroup RTCEx_WakeUp_Timer RTC WakeUp Timer
+ * @{
+ */
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
+/**
+ * @brief Enable the RTC WakeUp Timer peripheral.
+ * @param __HANDLE__ specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_WUTE))
+
+/**
+ * @brief Disable the RTC WakeUp Timer peripheral.
+ * @param __HANDLE__ specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_WUTE))
+
+/**
+ * @brief Enable the RTC WakeUpTimer interrupt.
+ * @param __HANDLE__ specifies the RTC handle.
+ * @param __INTERRUPT__ specifies the RTC WakeUpTimer interrupt sources to be enabled.
+ * This parameter can be:
+ * @arg RTC_IT_WUT: WakeUpTimer interrupt
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the RTC WakeUpTimer interrupt.
+ * @param __HANDLE__ specifies the RTC handle.
+ * @param __INTERRUPT__ specifies the RTC WakeUpTimer interrupt sources to be disabled.
+ * This parameter can be:
+ * @arg RTC_IT_WUT: WakeUpTimer interrupt
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
+
+/**
+ * @brief Check whether the specified RTC WakeUpTimer interrupt has occurred or not.
+ * @param __HANDLE__ specifies the RTC handle.
+ * @param __INTERRUPT__ specifies the RTC WakeUpTimer interrupt to check.
+ * This parameter can be:
+ * @arg RTC_IT_WUT: WakeUpTimer interrupt
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4U)) != RESET) ? SET : RESET)
+
+/**
+ * @brief Check whether the specified RTC Wake Up timer interrupt has been enabled or not.
+ * @param __HANDLE__ specifies the RTC handle.
+ * @param __INTERRUPT__ specifies the RTC Wake Up timer interrupt sources to check.
+ * This parameter can be:
+ * @arg RTC_IT_WUT: WakeUpTimer interrupt
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != RESET) ? SET : RESET)
+
+/**
+ * @brief Get the selected RTC WakeUpTimer's flag status.
+ * @param __HANDLE__ specifies the RTC handle.
+ * @param __FLAG__ specifies the RTC WakeUpTimer Flag is pending or not.
+ * This parameter can be:
+ * @arg RTC_FLAG_WUTF
+ * @arg RTC_FLAG_WUTWF
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET) ? SET : RESET)
+
+/**
+ * @brief Clear the RTC Wake Up timer's pending flags.
+ * @param __HANDLE__ specifies the RTC handle.
+ * @param __FLAG__ specifies the RTC WakeUpTimer Flag to clear.
+ * This parameter can be:
+ * @arg RTC_FLAG_WUTF
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
+
+/* WAKE-UP TIMER EXTI */
+/* ------------------ */
+/**
+ * @brief Enable interrupt on the RTC WakeUp Timer associated Exti line.
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT() (EXTI->IMR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
+
+/**
+ * @brief Disable interrupt on the RTC WakeUp Timer associated Exti line.
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT() (EXTI->IMR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))
+
+/**
+ * @brief Enable event on the RTC WakeUp Timer associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_EVENT() (EXTI->EMR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
+
+/**
+ * @brief Disable event on the RTC WakeUp Timer associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))
+
+/**
+ * @brief Enable falling edge trigger on the RTC WakeUp Timer associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE() (EXTI->FTSR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
+
+/**
+ * @brief Disable falling edge trigger on the RTC WakeUp Timer associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE() (EXTI->FTSR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))
+
+/**
+ * @brief Enable rising edge trigger on the RTC WakeUp Timer associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE() (EXTI->RTSR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
+
+/**
+ * @brief Disable rising edge trigger on the RTC WakeUp Timer associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE() (EXTI->RTSR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))
+
+/**
+ * @brief Enable rising & falling edge trigger on the RTC WakeUp Timer associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_FALLING_EDGE() __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE();__HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE();
+
+/**
+ * @brief Disable rising & falling edge trigger on the RTC WakeUp Timer associated Exti line.
+ * This parameter can be:
+ * @retval None.
+ */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_FALLING_EDGE() __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE();__HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE();
+
+/**
+ * @brief Check whether the RTC WakeUp Timer associated Exti line interrupt flag is set or not.
+ * @retval Line Status.
+ */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG() (EXTI->PR & RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
+
+/**
+ * @brief Clear the RTC WakeUp Timer associated Exti line flag.
+ * @retval None.
+ */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG() (EXTI->PR = RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
+
+/**
+ * @brief Generate a Software interrupt on the RTC WakeUp Timer associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT() (EXTI->SWIER |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
+#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) */
+/**
+ * @}
+ */
+
+/* ---------------------------------TIMESTAMP---------------------------------*/
+/** @defgroup RTCEx_Timestamp RTC Timestamp
+ * @{
+ */
+/**
+ * @brief Enable the RTC TimeStamp peripheral.
+ * @param __HANDLE__ specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_TSE))
+
+/**
+ * @brief Disable the RTC TimeStamp peripheral.
+ * @param __HANDLE__ specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_TSE))
+
+/**
+ * @brief Enable the RTC TimeStamp interrupt.
+ * @param __HANDLE__ specifies the RTC handle.
+ * @param __INTERRUPT__ specifies the RTC TimeStamp interrupt source to be enabled.
+ * This parameter can be:
+ * @arg RTC_IT_TS: TimeStamp interrupt
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the RTC TimeStamp interrupt.
+ * @param __HANDLE__ specifies the RTC handle.
+ * @param __INTERRUPT__ specifies the RTC TimeStamp interrupt source to be disabled.
+ * This parameter can be:
+ * @arg RTC_IT_TS: TimeStamp interrupt
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
+
+/**
+ * @brief Check whether the specified RTC TimeStamp interrupt has occurred or not.
+ * @param __HANDLE__ specifies the RTC handle.
+ * @param __INTERRUPT__ specifies the RTC TimeStamp interrupt to check.
+ * This parameter can be:
+ * @arg RTC_IT_TS: TimeStamp interrupt
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4U)) != RESET)? SET : RESET)
+
+/**
+ * @brief Check whether the specified RTC Time Stamp interrupt has been enabled or not.
+ * @param __HANDLE__ specifies the RTC handle.
+ * @param __INTERRUPT__ specifies the RTC Time Stamp interrupt source to check.
+ * This parameter can be:
+ * @arg RTC_IT_TS: TimeStamp interrupt
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != RESET) ? SET : RESET)
+
+/**
+ * @brief Get the selected RTC TimeStamp's flag status.
+ * @param __HANDLE__ specifies the RTC handle.
+ * @param __FLAG__ specifies the RTC TimeStamp Flag is pending or not.
+ * This parameter can be:
+ * @arg RTC_FLAG_TSF
+ * @arg RTC_FLAG_TSOVF
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
+
+/**
+ * @brief Clear the RTC Time Stamp's pending flags.
+ * @param __HANDLE__ specifies the RTC handle.
+ * @param __FLAG__ specifies the RTC Alarm Flag to clear.
+ * This parameter can be:
+ * @arg RTC_FLAG_TSF
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
+
+/**
+ * @}
+ */
+
+/* ---------------------------------TAMPER------------------------------------*/
+/** @defgroup RTCEx_Tamper RTC Tamper
+ * @{
+ */
+
+/**
+ * @brief Enable the RTC Tamper1 input detection.
+ * @param __HANDLE__ specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER1_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->TAFCR |= (RTC_TAFCR_TAMP1E))
+
+/**
+ * @brief Disable the RTC Tamper1 input detection.
+ * @param __HANDLE__ specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER1_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->TAFCR &= ~(RTC_TAFCR_TAMP1E))
+
+/**
+ * @brief Enable the RTC Tamper2 input detection.
+ * @param __HANDLE__ specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER2_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->TAFCR |= (RTC_TAFCR_TAMP2E))
+
+/**
+ * @brief Disable the RTC Tamper2 input detection.
+ * @param __HANDLE__ specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER2_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->TAFCR &= ~(RTC_TAFCR_TAMP2E))
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
+/**
+ * @brief Enable the RTC Tamper3 input detection.
+ * @param __HANDLE__ specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER3_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->TAFCR |= (RTC_TAFCR_TAMP3E))
+
+/**
+ * @brief Disable the RTC Tamper3 input detection.
+ * @param __HANDLE__ specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER3_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->TAFCR &= ~(RTC_TAFCR_TAMP3E))
+
+#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) */
+/**
+ * @brief Enable the RTC Tamper interrupt.
+ * @param __HANDLE__ specifies the RTC handle.
+ * @param __INTERRUPT__ specifies the RTC Tamper interrupt sources to be enabled.
+ * This parameter can be any combination of the following values:
+ * @arg RTC_IT_TAMP: Tamper interrupt
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->TAFCR |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the RTC Tamper interrupt.
+ * @param __HANDLE__ specifies the RTC handle.
+ * @param __INTERRUPT__ specifies the RTC Tamper interrupt sources to be disabled.
+ * This parameter can be any combination of the following values:
+ * @arg RTC_IT_TAMP: Tamper interrupt
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->TAFCR &= ~(__INTERRUPT__))
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
+/**
+ * @brief Check whether the specified RTC Tamper interrupt has occurred or not.
+ * @param __HANDLE__ specifies the RTC handle.
+ * @param __INTERRUPT__ specifies the RTC Tamper interrupt to check.
+ * This parameter can be:
+ * @arg RTC_IT_TAMP1: Tamper1 interrupt
+ * @arg RTC_IT_TAMP2: Tamper2 interrupt
+ * @arg RTC_IT_TAMP3: Tamper3 interrupt
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4U)) != RESET)? SET : RESET)
+#else
+
+/**
+ * @brief Check whether the specified RTC Tamper interrupt has occurred or not.
+ * @param __HANDLE__ specifies the RTC handle.
+ * @param __INTERRUPT__ specifies the RTC Tamper interrupt to check.
+ * This parameter can be:
+ * @arg RTC_IT_TAMP1: Tamper1 interrupt
+ * @arg RTC_IT_TAMP2: Tamper2 interrupt
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4U)) != RESET)? SET : RESET)
+
+#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) */
+
+/**
+ * @brief Check whether the specified RTC Tamper interrupt has been enabled or not.
+ * @param __HANDLE__ specifies the RTC handle.
+ * @param __INTERRUPT__ specifies the RTC Tamper interrupt source to check.
+ * This parameter can be:
+ * @arg RTC_IT_TAMP: Tamper interrupt
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->TAFCR) & (__INTERRUPT__)) != RESET) ? SET : RESET)
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
+/**
+ * @brief Get the selected RTC Tamper's flag status.
+ * @param __HANDLE__ specifies the RTC handle.
+ * @param __FLAG__ specifies the RTC Tamper Flag is pending or not.
+ * This parameter can be:
+ * @arg RTC_FLAG_TAMP1F
+ * @arg RTC_FLAG_TAMP2F
+ * @arg RTC_FLAG_TAMP3F
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
+
+
+/**
+ * @brief Clear the RTC Tamper's pending flags.
+ * @param __HANDLE__ specifies the RTC handle.
+ * @param __FLAG__ specifies the RTC Tamper Flag to clear.
+ * This parameter can be:
+ * @arg RTC_FLAG_TAMP1F
+ * @arg RTC_FLAG_TAMP2F
+ * @arg RTC_FLAG_TAMP3F
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
+
+#else
+
+/**
+ * @brief Get the selected RTC Tamper's flag status.
+ * @param __HANDLE__ specifies the RTC handle.
+ * @param __FLAG__ specifies the RTC Tamper Flag is pending or not.
+ * This parameter can be:
+ * @arg RTC_FLAG_TAMP1F
+ * @arg RTC_FLAG_TAMP2F
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
+
+
+/**
+ * @brief Clear the RTC Tamper's pending flags.
+ * @param __HANDLE__ specifies the RTC handle.
+ * @param __FLAG__ specifies the RTC Tamper Flag to clear.
+ * This parameter can be:
+ * @arg RTC_FLAG_TAMP1F
+ * @arg RTC_FLAG_TAMP2F
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
+
+#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) */
+/**
+ * @}
+ */
+
+/* --------------------------TAMPER/TIMESTAMP---------------------------------*/
+/** @defgroup RTCEx_Tamper_Timestamp EXTI RTC Tamper Timestamp EXTI
+ * @{
+ */
+
+/* TAMPER TIMESTAMP EXTI */
+/* --------------------- */
+/**
+ * @brief Enable interrupt on the RTC Tamper and Timestamp associated Exti line.
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT() (EXTI->IMR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
+
+/**
+ * @brief Disable interrupt on the RTC Tamper and Timestamp associated Exti line.
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT() (EXTI->IMR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))
+
+/**
+ * @brief Enable event on the RTC Tamper and Timestamp associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_EVENT() (EXTI->EMR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
+
+/**
+ * @brief Disable event on the RTC Tamper and Timestamp associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))
+
+/**
+ * @brief Enable falling edge trigger on the RTC Tamper and Timestamp associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_FALLING_EDGE() (EXTI->FTSR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
+
+/**
+ * @brief Disable falling edge trigger on the RTC Tamper and Timestamp associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_FALLING_EDGE() (EXTI->FTSR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))
+
+/**
+ * @brief Enable rising edge trigger on the RTC Tamper and Timestamp associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE() (EXTI->RTSR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
+
+/**
+ * @brief Disable rising edge trigger on the RTC Tamper and Timestamp associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_EDGE() (EXTI->RTSR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))
+
+/**
+ * @brief Enable rising & falling edge trigger on the RTC Tamper and Timestamp associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_FALLING_EDGE() __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE();__HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_FALLING_EDGE();
+
+/**
+ * @brief Disable rising & falling edge trigger on the RTC Tamper and Timestamp associated Exti line.
+ * This parameter can be:
+ * @retval None.
+ */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_FALLING_EDGE() __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_EDGE();__HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_FALLING_EDGE();
+
+/**
+ * @brief Check whether the RTC Tamper and Timestamp associated Exti line interrupt flag is set or not.
+ * @retval Line Status.
+ */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG() (EXTI->PR & RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
+
+/**
+ * @brief Clear the RTC Tamper and Timestamp associated Exti line flag.
+ * @retval None.
+ */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG() (EXTI->PR = RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
+
+/**
+ * @brief Generate a Software interrupt on the RTC Tamper and Timestamp associated Exti line
+ * @retval None.
+ */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT() (EXTI->SWIER |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
+/**
+ * @}
+ */
+
+/* ------------------------------Calibration----------------------------------*/
+/** @defgroup RTCEx_Calibration RTC Calibration
+ * @{
+ */
+
+/**
+ * @brief Enable the RTC calibration output.
+ * @param __HANDLE__ specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_CALIBRATION_OUTPUT_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_COE))
+
+/**
+ * @brief Disable the calibration output.
+ * @param __HANDLE__ specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_CALIBRATION_OUTPUT_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_COE))
+
+/**
+ * @brief Enable the clock reference detection.
+ * @param __HANDLE__ specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_CLOCKREF_DETECTION_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_REFCKON))
+
+/**
+ * @brief Disable the clock reference detection.
+ * @param __HANDLE__ specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_CLOCKREF_DETECTION_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_REFCKON))
+
+/**
+ * @brief Get the selected RTC shift operation's flag status.
+ * @param __HANDLE__ specifies the RTC handle.
+ * @param __FLAG__ specifies the RTC shift operation Flag is pending or not.
+ * This parameter can be:
+ * @arg RTC_FLAG_SHPF
+ * @retval None
+ */
+#define __HAL_RTC_SHIFT_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup RTCEx_Exported_Functions RTCEx Exported Functions
+ * @{
+ */
+
+/* RTC TimeStamp and Tamper functions *****************************************/
+/** @defgroup RTCEx_Exported_Functions_Group1 Extended RTC TimeStamp and Tamper functions
+ * @{
+ */
+
+HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin);
+HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp_IT(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin);
+HAL_StatusTypeDef HAL_RTCEx_DeactivateTimeStamp(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_GetTimeStamp(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTimeStamp, RTC_DateTypeDef *sTimeStampDate, uint32_t Format);
+
+HAL_StatusTypeDef HAL_RTCEx_SetTamper(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef *sTamper);
+HAL_StatusTypeDef HAL_RTCEx_SetTamper_IT(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef *sTamper);
+HAL_StatusTypeDef HAL_RTCEx_DeactivateTamper(RTC_HandleTypeDef *hrtc, uint32_t Tamper);
+void HAL_RTCEx_TamperTimeStampIRQHandler(RTC_HandleTypeDef *hrtc);
+
+void HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc);
+void HAL_RTCEx_Tamper2EventCallback(RTC_HandleTypeDef *hrtc);
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
+void HAL_RTCEx_Tamper3EventCallback(RTC_HandleTypeDef *hrtc);
+#endif
+void HAL_RTCEx_TimeStampEventCallback(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_PollForTimeStampEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+HAL_StatusTypeDef HAL_RTCEx_PollForTamper1Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+HAL_StatusTypeDef HAL_RTCEx_PollForTamper2Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
+HAL_StatusTypeDef HAL_RTCEx_PollForTamper3Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+#endif
+/**
+ * @}
+ */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
+/* RTC Wake-up functions ******************************************************/
+/** @defgroup RTCEx_Exported_Functions_Group2 Extended RTC Wake-up functions
+ * @{
+ */
+
+HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock);
+HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer_IT(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock);
+uint32_t HAL_RTCEx_DeactivateWakeUpTimer(RTC_HandleTypeDef *hrtc);
+uint32_t HAL_RTCEx_GetWakeUpTimer(RTC_HandleTypeDef *hrtc);
+void HAL_RTCEx_WakeUpTimerIRQHandler(RTC_HandleTypeDef *hrtc);
+void HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_PollForWakeUpTimerEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+#endif
+/**
+ * @}
+ */
+
+/* Extended Control functions ************************************************/
+/** @defgroup RTCEx_Exported_Functions_Group3 Extended Peripheral Control functions
+ * @{
+ */
+
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F030xC) && !defined(STM32F070x6) && !defined(STM32F070xB)
+void HAL_RTCEx_BKUPWrite(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister, uint32_t Data);
+uint32_t HAL_RTCEx_BKUPRead(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister);
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F030xC) && !defined(STM32F070x6) && !defined(STM32F070xB) */
+
+HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef *hrtc, uint32_t SmoothCalibPeriod, uint32_t SmoothCalibPlusPulses, uint32_t SmoothCalibMinusPulsesValue);
+HAL_StatusTypeDef HAL_RTCEx_SetSynchroShift(RTC_HandleTypeDef *hrtc, uint32_t ShiftAdd1S, uint32_t ShiftSubFS);
+HAL_StatusTypeDef HAL_RTCEx_SetCalibrationOutPut(RTC_HandleTypeDef *hrtc, uint32_t CalibOutput);
+HAL_StatusTypeDef HAL_RTCEx_DeactivateCalibrationOutPut(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_SetRefClock(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_DeactivateRefClock(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_EnableBypassShadow(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_DisableBypassShadow(RTC_HandleTypeDef *hrtc);
+/**
+ * @}
+ */
+
+/* Extended RTC features functions *******************************************/
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup RTCEx_Private_Constants RTCEx Private Constants
+ * @{
+ */
+#define RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT ((uint32_t)EXTI_IMR_MR19) /*!< External interrupt line 19 Connected to the RTC Tamper and Time Stamp events */
+#define RTC_EXTI_LINE_WAKEUPTIMER_EVENT ((uint32_t)EXTI_IMR_MR20) /*!< External interrupt line 20 Connected to the RTC Wakeup event */
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup RTCEx_Private_Macros RTCEx Private Macros
+ * @{
+ */
+
+/** @defgroup RTCEx_IS_RTC_Definitions Private macros to check input parameters
+ * @{
+ */
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
+#define IS_RTC_OUTPUT(OUTPUT) (((OUTPUT) == RTC_OUTPUT_DISABLE) || \
+ ((OUTPUT) == RTC_OUTPUT_ALARMA) || \
+ ((OUTPUT) == RTC_OUTPUT_WAKEUP))
+#else
+#define IS_RTC_OUTPUT(OUTPUT) (((OUTPUT) == RTC_OUTPUT_DISABLE) || \
+ ((OUTPUT) == RTC_OUTPUT_ALARMA))
+#endif
+
+#define IS_RTC_BKP(BKP) ((BKP) < (uint32_t) RTC_BKP_NUMBER)
+
+#define IS_TIMESTAMP_EDGE(EDGE) (((EDGE) == RTC_TIMESTAMPEDGE_RISING) || \
+ ((EDGE) == RTC_TIMESTAMPEDGE_FALLING))
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
+#define IS_RTC_TAMPER(TAMPER) ((((TAMPER) & (uint32_t)0xFFFFFFD6U) == 0x00U) && ((TAMPER) != (uint32_t)RESET))
+
+#else
+#define IS_RTC_TAMPER(TAMPER) ((((TAMPER) & (uint32_t)0xFFFFFFF6U) == 0x00U) && ((TAMPER) != (uint32_t)RESET))
+
+#endif
+
+#define IS_RTC_TIMESTAMP_PIN(PIN) (((PIN) == RTC_TIMESTAMPPIN_DEFAULT))
+
+
+#define IS_RTC_TAMPER_TRIGGER(TRIGGER) (((TRIGGER) == RTC_TAMPERTRIGGER_RISINGEDGE) || \
+ ((TRIGGER) == RTC_TAMPERTRIGGER_FALLINGEDGE) || \
+ ((TRIGGER) == RTC_TAMPERTRIGGER_LOWLEVEL) || \
+ ((TRIGGER) == RTC_TAMPERTRIGGER_HIGHLEVEL))
+#define IS_RTC_TAMPER_FILTER(FILTER) (((FILTER) == RTC_TAMPERFILTER_DISABLE) || \
+ ((FILTER) == RTC_TAMPERFILTER_2SAMPLE) || \
+ ((FILTER) == RTC_TAMPERFILTER_4SAMPLE) || \
+ ((FILTER) == RTC_TAMPERFILTER_8SAMPLE))
+#define IS_RTC_TAMPER_SAMPLING_FREQ(FREQ) (((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768)|| \
+ ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384)|| \
+ ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192) || \
+ ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096) || \
+ ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048) || \
+ ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024) || \
+ ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512) || \
+ ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256))
+#define IS_RTC_TAMPER_PRECHARGE_DURATION(DURATION) (((DURATION) == RTC_TAMPERPRECHARGEDURATION_1RTCCLK) || \
+ ((DURATION) == RTC_TAMPERPRECHARGEDURATION_2RTCCLK) || \
+ ((DURATION) == RTC_TAMPERPRECHARGEDURATION_4RTCCLK) || \
+ ((DURATION) == RTC_TAMPERPRECHARGEDURATION_8RTCCLK))
+#define IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(DETECTION) (((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_ENABLE) || \
+ ((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_DISABLE))
+#define IS_RTC_TAMPER_PULLUP_STATE(STATE) (((STATE) == RTC_TAMPER_PULLUP_ENABLE) || \
+ ((STATE) == RTC_TAMPER_PULLUP_DISABLE))
+#define IS_RTC_WAKEUP_CLOCK(CLOCK) (((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV16) || \
+ ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV8) || \
+ ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV4) || \
+ ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV2) || \
+ ((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_16BITS) || \
+ ((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_17BITS))
+
+#define IS_RTC_WAKEUP_COUNTER(COUNTER) ((COUNTER) <= 0xFFFFU)
+
+
+#define IS_RTC_SMOOTH_CALIB_PERIOD(PERIOD) (((PERIOD) == RTC_SMOOTHCALIB_PERIOD_32SEC) || \
+ ((PERIOD) == RTC_SMOOTHCALIB_PERIOD_16SEC) || \
+ ((PERIOD) == RTC_SMOOTHCALIB_PERIOD_8SEC))
+#define IS_RTC_SMOOTH_CALIB_PLUS(PLUS) (((PLUS) == RTC_SMOOTHCALIB_PLUSPULSES_SET) || \
+ ((PLUS) == RTC_SMOOTHCALIB_PLUSPULSES_RESET))
+
+
+#define IS_RTC_SMOOTH_CALIB_MINUS(VALUE) ((VALUE) <= 0x000001FFU)
+#define IS_RTC_SHIFT_ADD1S(SEL) (((SEL) == RTC_SHIFTADD1S_RESET) || \
+ ((SEL) == RTC_SHIFTADD1S_SET))
+#define IS_RTC_SHIFT_SUBFS(FS) ((FS) <= 0x00007FFFU)
+#define IS_RTC_CALIB_OUTPUT(OUTPUT) (((OUTPUT) == RTC_CALIBOUTPUT_512HZ) || \
+ ((OUTPUT) == RTC_CALIBOUTPUT_1HZ))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_RTC_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_smartcard.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_smartcard.h
new file mode 100644
index 0000000..cc82e76
--- /dev/null
+++ b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_smartcard.h
@@ -0,0 +1,1021 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_smartcard.h
+ * @author MCD Application Team
+ * @brief Header file of SMARTCARD HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32F0xx_HAL_SMARTCARD_H
+#define STM32F0xx_HAL_SMARTCARD_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup SMARTCARD
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup SMARTCARD_Exported_Types SMARTCARD Exported Types
+ * @{
+ */
+
+/**
+ * @brief SMARTCARD Init Structure definition
+ */
+typedef struct
+{
+ uint32_t BaudRate; /*!< Configures the SmartCard communication baud rate.
+ The baud rate register is computed using the following formula:
+ Baud Rate Register = ((usart_ker_ckpres) / ((hsmartcard->Init.BaudRate)))
+ where usart_ker_ckpres is the USART input clock divided by a prescaler */
+
+ uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
+ This parameter @ref SMARTCARD_Word_Length can only be set to 9 (8 data + 1 parity bits). */
+
+ uint32_t StopBits; /*!< Specifies the number of stop bits.
+ This parameter can be a value of @ref SMARTCARD_Stop_Bits. */
+
+ uint16_t Parity; /*!< Specifies the parity mode.
+ This parameter can be a value of @ref SMARTCARD_Parity
+ @note The parity is enabled by default (PCE is forced to 1).
+ Since the WordLength is forced to 8 bits + parity, M is
+ forced to 1 and the parity bit is the 9th bit. */
+
+ uint16_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled.
+ This parameter can be a value of @ref SMARTCARD_Mode */
+
+ uint16_t CLKPolarity; /*!< Specifies the steady state of the serial clock.
+ This parameter can be a value of @ref SMARTCARD_Clock_Polarity */
+
+ uint16_t CLKPhase; /*!< Specifies the clock transition on which the bit capture is made.
+ This parameter can be a value of @ref SMARTCARD_Clock_Phase */
+
+ uint16_t CLKLastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted
+ data bit (MSB) has to be output on the SCLK pin in synchronous mode.
+ This parameter can be a value of @ref SMARTCARD_Last_Bit */
+
+ uint16_t OneBitSampling; /*!< Specifies whether a single sample or three samples' majority vote is selected.
+ Selecting the single sample method increases the receiver tolerance to clock
+ deviations. This parameter can be a value of @ref SMARTCARD_OneBit_Sampling. */
+
+ uint8_t Prescaler; /*!< Specifies the SmartCard Prescaler.
+ This parameter can be any value from 0x01 to 0x1F. Prescaler value is multiplied
+ by 2 to give the division factor of the source clock frequency */
+
+ uint8_t GuardTime; /*!< Specifies the SmartCard Guard Time applied after stop bits. */
+
+ uint16_t NACKEnable; /*!< Specifies whether the SmartCard NACK transmission is enabled
+ in case of parity error.
+ This parameter can be a value of @ref SMARTCARD_NACK_Enable */
+
+ uint32_t TimeOutEnable; /*!< Specifies whether the receiver timeout is enabled.
+ This parameter can be a value of @ref SMARTCARD_Timeout_Enable*/
+
+ uint32_t TimeOutValue; /*!< Specifies the receiver time out value in number of baud blocks:
+ it is used to implement the Character Wait Time (CWT) and
+ Block Wait Time (BWT). It is coded over 24 bits. */
+
+ uint8_t BlockLength; /*!< Specifies the SmartCard Block Length in T=1 Reception mode.
+ This parameter can be any value from 0x0 to 0xFF */
+
+ uint8_t AutoRetryCount; /*!< Specifies the SmartCard auto-retry count (number of retries in
+ receive and transmit mode). When set to 0, retransmission is
+ disabled. Otherwise, its maximum value is 7 (before signalling
+ an error) */
+
+} SMARTCARD_InitTypeDef;
+
+/**
+ * @brief SMARTCARD advanced features initalization structure definition
+ */
+typedef struct
+{
+ uint32_t AdvFeatureInit; /*!< Specifies which advanced SMARTCARD features is initialized. Several
+ advanced features may be initialized at the same time. This parameter
+ can be a value of @ref SMARTCARDEx_Advanced_Features_Initialization_Type */
+
+ uint32_t TxPinLevelInvert; /*!< Specifies whether the TX pin active level is inverted.
+ This parameter can be a value of @ref SMARTCARD_Tx_Inv */
+
+ uint32_t RxPinLevelInvert; /*!< Specifies whether the RX pin active level is inverted.
+ This parameter can be a value of @ref SMARTCARD_Rx_Inv */
+
+ uint32_t DataInvert; /*!< Specifies whether data are inverted (positive/direct logic
+ vs negative/inverted logic).
+ This parameter can be a value of @ref SMARTCARD_Data_Inv */
+
+ uint32_t Swap; /*!< Specifies whether TX and RX pins are swapped.
+ This parameter can be a value of @ref SMARTCARD_Rx_Tx_Swap */
+
+ uint32_t OverrunDisable; /*!< Specifies whether the reception overrun detection is disabled.
+ This parameter can be a value of @ref SMARTCARD_Overrun_Disable */
+
+ uint32_t DMADisableonRxError; /*!< Specifies whether the DMA is disabled in case of reception error.
+ This parameter can be a value of @ref SMARTCARD_DMA_Disable_on_Rx_Error */
+
+ uint32_t MSBFirst; /*!< Specifies whether MSB is sent first on UART line.
+ This parameter can be a value of @ref SMARTCARD_MSB_First */
+
+ uint16_t TxCompletionIndication; /*!< Specifies which transmission completion indication is used: before (when
+ relevant flag is available) or once guard time period has elapsed.
+ This parameter can be a value of @ref SMARTCARDEx_Transmission_Completion_Indication. */
+} SMARTCARD_AdvFeatureInitTypeDef;
+
+/**
+ * @brief HAL SMARTCARD State definition
+ * @note HAL SMARTCARD State value is a combination of 2 different substates: gState and RxState (see @ref SMARTCARD_State_Definition).
+ * - gState contains SMARTCARD state information related to global Handle management
+ * and also information related to Tx operations.
+ * gState value coding follow below described bitmap :
+ * b7-b6 Error information
+ * 00 : No Error
+ * 01 : (Not Used)
+ * 10 : Timeout
+ * 11 : Error
+ * b5 Peripheral initialization status
+ * 0 : Reset (Peripheral not initialized)
+ * 1 : Init done (Peripheral not initialized. HAL SMARTCARD Init function already called)
+ * b4-b3 (not used)
+ * xx : Should be set to 00
+ * b2 Intrinsic process state
+ * 0 : Ready
+ * 1 : Busy (Peripheral busy with some configuration or internal operations)
+ * b1 (not used)
+ * x : Should be set to 0
+ * b0 Tx state
+ * 0 : Ready (no Tx operation ongoing)
+ * 1 : Busy (Tx operation ongoing)
+ * - RxState contains information related to Rx operations.
+ * RxState value coding follow below described bitmap :
+ * b7-b6 (not used)
+ * xx : Should be set to 00
+ * b5 Peripheral initialization status
+ * 0 : Reset (Peripheral not initialized)
+ * 1 : Init done (Peripheral not initialized)
+ * b4-b2 (not used)
+ * xxx : Should be set to 000
+ * b1 Rx state
+ * 0 : Ready (no Rx operation ongoing)
+ * 1 : Busy (Rx operation ongoing)
+ * b0 (not used)
+ * x : Should be set to 0.
+ */
+typedef uint32_t HAL_SMARTCARD_StateTypeDef;
+
+/**
+ * @brief SMARTCARD handle Structure definition
+ */
+typedef struct __SMARTCARD_HandleTypeDef
+{
+ USART_TypeDef *Instance; /*!< USART registers base address */
+
+ SMARTCARD_InitTypeDef Init; /*!< SmartCard communication parameters */
+
+ SMARTCARD_AdvFeatureInitTypeDef AdvancedInit; /*!< SmartCard advanced features initialization parameters */
+
+ uint8_t *pTxBuffPtr; /*!< Pointer to SmartCard Tx transfer Buffer */
+
+ uint16_t TxXferSize; /*!< SmartCard Tx Transfer size */
+
+ __IO uint16_t TxXferCount; /*!< SmartCard Tx Transfer Counter */
+
+ uint8_t *pRxBuffPtr; /*!< Pointer to SmartCard Rx transfer Buffer */
+
+ uint16_t RxXferSize; /*!< SmartCard Rx Transfer size */
+
+ __IO uint16_t RxXferCount; /*!< SmartCard Rx Transfer Counter */
+
+
+ void (*RxISR)(struct __SMARTCARD_HandleTypeDef *huart); /*!< Function pointer on Rx IRQ handler */
+
+ void (*TxISR)(struct __SMARTCARD_HandleTypeDef *huart); /*!< Function pointer on Tx IRQ handler */
+
+ DMA_HandleTypeDef *hdmatx; /*!< SmartCard Tx DMA Handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /*!< SmartCard Rx DMA Handle parameters */
+
+ HAL_LockTypeDef Lock; /*!< Locking object */
+
+ __IO HAL_SMARTCARD_StateTypeDef gState; /*!< SmartCard state information related to global Handle management
+ and also related to Tx operations.
+ This parameter can be a value of @ref HAL_SMARTCARD_StateTypeDef */
+
+ __IO HAL_SMARTCARD_StateTypeDef RxState; /*!< SmartCard state information related to Rx operations.
+ This parameter can be a value of @ref HAL_SMARTCARD_StateTypeDef */
+
+ __IO uint32_t ErrorCode; /*!< SmartCard Error code */
+
+#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1)
+ void (* TxCpltCallback)(struct __SMARTCARD_HandleTypeDef *hsmartcard); /*!< SMARTCARD Tx Complete Callback */
+
+ void (* RxCpltCallback)(struct __SMARTCARD_HandleTypeDef *hsmartcard); /*!< SMARTCARD Rx Complete Callback */
+
+ void (* ErrorCallback)(struct __SMARTCARD_HandleTypeDef *hsmartcard); /*!< SMARTCARD Error Callback */
+
+ void (* AbortCpltCallback)(struct __SMARTCARD_HandleTypeDef *hsmartcard); /*!< SMARTCARD Abort Complete Callback */
+
+ void (* AbortTransmitCpltCallback)(struct __SMARTCARD_HandleTypeDef *hsmartcard); /*!< SMARTCARD Abort Transmit Complete Callback */
+
+ void (* AbortReceiveCpltCallback)(struct __SMARTCARD_HandleTypeDef *hsmartcard); /*!< SMARTCARD Abort Receive Complete Callback */
+
+ void (* MspInitCallback)(struct __SMARTCARD_HandleTypeDef *hsmartcard); /*!< SMARTCARD Msp Init callback */
+
+ void (* MspDeInitCallback)(struct __SMARTCARD_HandleTypeDef *hsmartcard); /*!< SMARTCARD Msp DeInit callback */
+#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */
+
+} SMARTCARD_HandleTypeDef;
+
+#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1)
+/**
+ * @brief HAL SMARTCARD Callback ID enumeration definition
+ */
+typedef enum
+{
+ HAL_SMARTCARD_TX_COMPLETE_CB_ID = 0x00U, /*!< SMARTCARD Tx Complete Callback ID */
+ HAL_SMARTCARD_RX_COMPLETE_CB_ID = 0x01U, /*!< SMARTCARD Rx Complete Callback ID */
+ HAL_SMARTCARD_ERROR_CB_ID = 0x02U, /*!< SMARTCARD Error Callback ID */
+ HAL_SMARTCARD_ABORT_COMPLETE_CB_ID = 0x03U, /*!< SMARTCARD Abort Complete Callback ID */
+ HAL_SMARTCARD_ABORT_TRANSMIT_COMPLETE_CB_ID = 0x04U, /*!< SMARTCARD Abort Transmit Complete Callback ID */
+ HAL_SMARTCARD_ABORT_RECEIVE_COMPLETE_CB_ID = 0x05U, /*!< SMARTCARD Abort Receive Complete Callback ID */
+
+ HAL_SMARTCARD_MSPINIT_CB_ID = 0x08U, /*!< SMARTCARD MspInit callback ID */
+ HAL_SMARTCARD_MSPDEINIT_CB_ID = 0x09U /*!< SMARTCARD MspDeInit callback ID */
+
+} HAL_SMARTCARD_CallbackIDTypeDef;
+
+/**
+ * @brief HAL SMARTCARD Callback pointer definition
+ */
+typedef void (*pSMARTCARD_CallbackTypeDef)(SMARTCARD_HandleTypeDef *hsmartcard); /*!< pointer to an SMARTCARD callback function */
+
+#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */
+
+/**
+ * @brief SMARTCARD clock sources
+ */
+typedef enum
+{
+ SMARTCARD_CLOCKSOURCE_PCLK1 = 0x00U, /*!< PCLK1 clock source */
+ SMARTCARD_CLOCKSOURCE_HSI = 0x02U, /*!< HSI clock source */
+ SMARTCARD_CLOCKSOURCE_SYSCLK = 0x04U, /*!< SYSCLK clock source */
+ SMARTCARD_CLOCKSOURCE_LSE = 0x08U, /*!< LSE clock source */
+ SMARTCARD_CLOCKSOURCE_UNDEFINED = 0x10U /*!< undefined clock source */
+} SMARTCARD_ClockSourceTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup SMARTCARD_Exported_Constants SMARTCARD Exported Constants
+ * @{
+ */
+
+/** @defgroup SMARTCARD_State_Definition SMARTCARD State Code Definition
+ * @{
+ */
+#define HAL_SMARTCARD_STATE_RESET 0x00000000U /*!< Peripheral is not initialized
+ Value is allowed for gState and RxState */
+#define HAL_SMARTCARD_STATE_READY 0x00000020U /*!< Peripheral Initialized and ready for use
+ Value is allowed for gState and RxState */
+#define HAL_SMARTCARD_STATE_BUSY 0x00000024U /*!< an internal process is ongoing
+ Value is allowed for gState only */
+#define HAL_SMARTCARD_STATE_BUSY_TX 0x00000021U /*!< Data Transmission process is ongoing
+ Value is allowed for gState only */
+#define HAL_SMARTCARD_STATE_BUSY_RX 0x00000022U /*!< Data Reception process is ongoing
+ Value is allowed for RxState only */
+#define HAL_SMARTCARD_STATE_BUSY_TX_RX 0x00000023U /*!< Data Transmission and Reception process is ongoing
+ Not to be used for neither gState nor RxState.
+ Value is result of combination (Or) between gState and RxState values */
+#define HAL_SMARTCARD_STATE_TIMEOUT 0x000000A0U /*!< Timeout state
+ Value is allowed for gState only */
+#define HAL_SMARTCARD_STATE_ERROR 0x000000E0U /*!< Error
+ Value is allowed for gState only */
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Error_Definition SMARTCARD Error Code Definition
+ * @{
+ */
+#define HAL_SMARTCARD_ERROR_NONE ((uint32_t)0x00000000U) /*!< No error */
+#define HAL_SMARTCARD_ERROR_PE ((uint32_t)0x00000001U) /*!< Parity error */
+#define HAL_SMARTCARD_ERROR_NE ((uint32_t)0x00000002U) /*!< Noise error */
+#define HAL_SMARTCARD_ERROR_FE ((uint32_t)0x00000004U) /*!< frame error */
+#define HAL_SMARTCARD_ERROR_ORE ((uint32_t)0x00000008U) /*!< Overrun error */
+#define HAL_SMARTCARD_ERROR_DMA ((uint32_t)0x00000010U) /*!< DMA transfer error */
+#define HAL_SMARTCARD_ERROR_RTO ((uint32_t)0x00000020U) /*!< Receiver TimeOut error */
+#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1)
+#define HAL_SMARTCARD_ERROR_INVALID_CALLBACK ((uint32_t)0x00000040U) /*!< Invalid Callback error */
+#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Word_Length SMARTCARD Word Length
+ * @{
+ */
+#if defined(USART_CR1_M0)
+#define SMARTCARD_WORDLENGTH_9B USART_CR1_M0 /*!< SMARTCARD frame length */
+#else
+#define SMARTCARD_WORDLENGTH_9B USART_CR1_M /*!< SMARTCARD frame length */
+#endif /* USART_CR1_M0 */
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Stop_Bits SMARTCARD Number of Stop Bits
+ * @{
+ */
+#define SMARTCARD_STOPBITS_0_5 USART_CR2_STOP_0 /*!< SMARTCARD frame with 0.5 stop bit */
+#define SMARTCARD_STOPBITS_1_5 USART_CR2_STOP /*!< SMARTCARD frame with 1.5 stop bits */
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Parity SMARTCARD Parity
+ * @{
+ */
+#define SMARTCARD_PARITY_EVEN USART_CR1_PCE /*!< SMARTCARD frame even parity */
+#define SMARTCARD_PARITY_ODD (USART_CR1_PCE | USART_CR1_PS) /*!< SMARTCARD frame odd parity */
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Mode SMARTCARD Transfer Mode
+ * @{
+ */
+#define SMARTCARD_MODE_RX USART_CR1_RE /*!< SMARTCARD RX mode */
+#define SMARTCARD_MODE_TX USART_CR1_TE /*!< SMARTCARD TX mode */
+#define SMARTCARD_MODE_TX_RX (USART_CR1_TE |USART_CR1_RE) /*!< SMARTCARD RX and TX mode */
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Clock_Polarity SMARTCARD Clock Polarity
+ * @{
+ */
+#define SMARTCARD_POLARITY_LOW 0x00000000U /*!< SMARTCARD frame low polarity */
+#define SMARTCARD_POLARITY_HIGH USART_CR2_CPOL /*!< SMARTCARD frame high polarity */
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Clock_Phase SMARTCARD Clock Phase
+ * @{
+ */
+#define SMARTCARD_PHASE_1EDGE 0x00000000U /*!< SMARTCARD frame phase on first clock transition */
+#define SMARTCARD_PHASE_2EDGE USART_CR2_CPHA /*!< SMARTCARD frame phase on second clock transition */
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Last_Bit SMARTCARD Last Bit
+ * @{
+ */
+#define SMARTCARD_LASTBIT_DISABLE 0x00000000U /*!< SMARTCARD frame last data bit clock pulse not output to SCLK pin */
+#define SMARTCARD_LASTBIT_ENABLE USART_CR2_LBCL /*!< SMARTCARD frame last data bit clock pulse output to SCLK pin */
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_OneBit_Sampling SMARTCARD One Bit Sampling Method
+ * @{
+ */
+#define SMARTCARD_ONE_BIT_SAMPLE_DISABLE 0x00000000U /*!< SMARTCARD frame one-bit sample disabled */
+#define SMARTCARD_ONE_BIT_SAMPLE_ENABLE USART_CR3_ONEBIT /*!< SMARTCARD frame one-bit sample enabled */
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_NACK_Enable SMARTCARD NACK Enable
+ * @{
+ */
+#define SMARTCARD_NACK_DISABLE 0x00000000U /*!< SMARTCARD NACK transmission disabled */
+#define SMARTCARD_NACK_ENABLE USART_CR3_NACK /*!< SMARTCARD NACK transmission enabled */
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Timeout_Enable SMARTCARD Timeout Enable
+ * @{
+ */
+#define SMARTCARD_TIMEOUT_DISABLE 0x00000000U /*!< SMARTCARD receiver timeout disabled */
+#define SMARTCARD_TIMEOUT_ENABLE USART_CR2_RTOEN /*!< SMARTCARD receiver timeout enabled */
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Tx_Inv SMARTCARD advanced feature TX pin active level inversion
+ * @{
+ */
+#define SMARTCARD_ADVFEATURE_TXINV_DISABLE 0x00000000U /*!< TX pin active level inversion disable */
+#define SMARTCARD_ADVFEATURE_TXINV_ENABLE USART_CR2_TXINV /*!< TX pin active level inversion enable */
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Rx_Inv SMARTCARD advanced feature RX pin active level inversion
+ * @{
+ */
+#define SMARTCARD_ADVFEATURE_RXINV_DISABLE 0x00000000U /*!< RX pin active level inversion disable */
+#define SMARTCARD_ADVFEATURE_RXINV_ENABLE USART_CR2_RXINV /*!< RX pin active level inversion enable */
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Data_Inv SMARTCARD advanced feature Binary Data inversion
+ * @{
+ */
+#define SMARTCARD_ADVFEATURE_DATAINV_DISABLE 0x00000000U /*!< Binary data inversion disable */
+#define SMARTCARD_ADVFEATURE_DATAINV_ENABLE USART_CR2_DATAINV /*!< Binary data inversion enable */
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Rx_Tx_Swap SMARTCARD advanced feature RX TX pins swap
+ * @{
+ */
+#define SMARTCARD_ADVFEATURE_SWAP_DISABLE 0x00000000U /*!< TX/RX pins swap disable */
+#define SMARTCARD_ADVFEATURE_SWAP_ENABLE USART_CR2_SWAP /*!< TX/RX pins swap enable */
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Overrun_Disable SMARTCARD advanced feature Overrun Disable
+ * @{
+ */
+#define SMARTCARD_ADVFEATURE_OVERRUN_ENABLE 0x00000000U /*!< RX overrun enable */
+#define SMARTCARD_ADVFEATURE_OVERRUN_DISABLE USART_CR3_OVRDIS /*!< RX overrun disable */
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_DMA_Disable_on_Rx_Error SMARTCARD advanced feature DMA Disable on Rx Error
+ * @{
+ */
+#define SMARTCARD_ADVFEATURE_DMA_ENABLEONRXERROR 0x00000000U /*!< DMA enable on Reception Error */
+#define SMARTCARD_ADVFEATURE_DMA_DISABLEONRXERROR USART_CR3_DDRE /*!< DMA disable on Reception Error */
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_MSB_First SMARTCARD advanced feature MSB first
+ * @{
+ */
+#define SMARTCARD_ADVFEATURE_MSBFIRST_DISABLE 0x00000000U /*!< Most significant bit sent/received first disable */
+#define SMARTCARD_ADVFEATURE_MSBFIRST_ENABLE USART_CR2_MSBFIRST /*!< Most significant bit sent/received first enable */
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Request_Parameters SMARTCARD Request Parameters
+ * @{
+ */
+#define SMARTCARD_RXDATA_FLUSH_REQUEST USART_RQR_RXFRQ /*!< Receive data flush request */
+#define SMARTCARD_TXDATA_FLUSH_REQUEST USART_RQR_TXFRQ /*!< Transmit data flush request */
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Interruption_Mask SMARTCARD interruptions flags mask
+ * @{
+ */
+#define SMARTCARD_IT_MASK 0x001FU /*!< SMARTCARD interruptions flags mask */
+#define SMARTCARD_CR_MASK 0x00E0U /*!< SMARTCARD control register mask */
+#define SMARTCARD_CR_POS 5U /*!< SMARTCARD control register position */
+#define SMARTCARD_ISR_MASK 0x1F00U /*!< SMARTCARD ISR register mask */
+#define SMARTCARD_ISR_POS 8U /*!< SMARTCARD ISR register position */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup SMARTCARD_Exported_Macros SMARTCARD Exported Macros
+ * @{
+ */
+
+/** @brief Reset SMARTCARD handle states.
+ * @param __HANDLE__ SMARTCARD handle.
+ * @retval None
+ */
+#if USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1
+#define __HAL_SMARTCARD_RESET_HANDLE_STATE(__HANDLE__) do{ \
+ (__HANDLE__)->gState = HAL_SMARTCARD_STATE_RESET; \
+ (__HANDLE__)->RxState = HAL_SMARTCARD_STATE_RESET; \
+ (__HANDLE__)->MspInitCallback = NULL; \
+ (__HANDLE__)->MspDeInitCallback = NULL; \
+ } while(0U)
+#else
+#define __HAL_SMARTCARD_RESET_HANDLE_STATE(__HANDLE__) do{ \
+ (__HANDLE__)->gState = HAL_SMARTCARD_STATE_RESET; \
+ (__HANDLE__)->RxState = HAL_SMARTCARD_STATE_RESET; \
+ } while(0U)
+#endif /*USE_HAL_SMARTCARD_REGISTER_CALLBACKS */
+
+/** @brief Flush the Smartcard Data registers.
+ * @param __HANDLE__ specifies the SMARTCARD Handle.
+ * @retval None
+ */
+#define __HAL_SMARTCARD_FLUSH_DRREGISTER(__HANDLE__) \
+ do{ \
+ SET_BIT((__HANDLE__)->Instance->RQR, SMARTCARD_RXDATA_FLUSH_REQUEST); \
+ SET_BIT((__HANDLE__)->Instance->RQR, SMARTCARD_TXDATA_FLUSH_REQUEST); \
+ } while(0U)
+
+/** @brief Clear the specified SMARTCARD pending flag.
+ * @param __HANDLE__ specifies the SMARTCARD Handle.
+ * @param __FLAG__ specifies the flag to check.
+ * This parameter can be any combination of the following values:
+ * @arg @ref SMARTCARD_CLEAR_PEF Parity error clear flag
+ * @arg @ref SMARTCARD_CLEAR_FEF Framing error clear flag
+ * @arg @ref SMARTCARD_CLEAR_NEF Noise detected clear flag
+ * @arg @ref SMARTCARD_CLEAR_OREF OverRun error clear flag
+ * @arg @ref SMARTCARD_CLEAR_IDLEF Idle line detected clear flag
+ * @arg @ref SMARTCARD_CLEAR_TCF Transmission complete clear flag
+ * @arg @ref SMARTCARD_CLEAR_TCBGTF Transmission complete before guard time clear flag
+ * @arg @ref SMARTCARD_CLEAR_RTOF Receiver timeout clear flag
+ * @arg @ref SMARTCARD_CLEAR_EOBF End of block clear flag
+ * @retval None
+ */
+#define __HAL_SMARTCARD_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__))
+
+/** @brief Clear the SMARTCARD PE pending flag.
+ * @param __HANDLE__ specifies the SMARTCARD Handle.
+ * @retval None
+ */
+#define __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_FLAG((__HANDLE__), SMARTCARD_CLEAR_PEF)
+
+/** @brief Clear the SMARTCARD FE pending flag.
+ * @param __HANDLE__ specifies the SMARTCARD Handle.
+ * @retval None
+ */
+#define __HAL_SMARTCARD_CLEAR_FEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_FLAG((__HANDLE__), SMARTCARD_CLEAR_FEF)
+
+/** @brief Clear the SMARTCARD NE pending flag.
+ * @param __HANDLE__ specifies the SMARTCARD Handle.
+ * @retval None
+ */
+#define __HAL_SMARTCARD_CLEAR_NEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_FLAG((__HANDLE__), SMARTCARD_CLEAR_NEF)
+
+/** @brief Clear the SMARTCARD ORE pending flag.
+ * @param __HANDLE__ specifies the SMARTCARD Handle.
+ * @retval None
+ */
+#define __HAL_SMARTCARD_CLEAR_OREFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_FLAG((__HANDLE__), SMARTCARD_CLEAR_OREF)
+
+/** @brief Clear the SMARTCARD IDLE pending flag.
+ * @param __HANDLE__ specifies the SMARTCARD Handle.
+ * @retval None
+ */
+#define __HAL_SMARTCARD_CLEAR_IDLEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_FLAG((__HANDLE__), SMARTCARD_CLEAR_IDLEF)
+
+/** @brief Check whether the specified Smartcard flag is set or not.
+ * @param __HANDLE__ specifies the SMARTCARD Handle.
+ * @param __FLAG__ specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg @ref SMARTCARD_FLAG_TCBGT Transmission complete before guard time flag (when flag available)
+ * @arg @ref SMARTCARD_FLAG_REACK Receive enable acknowledge flag
+ * @arg @ref SMARTCARD_FLAG_TEACK Transmit enable acknowledge flag
+ * @arg @ref SMARTCARD_FLAG_BUSY Busy flag
+ * @arg @ref SMARTCARD_FLAG_EOBF End of block flag
+ * @arg @ref SMARTCARD_FLAG_RTOF Receiver timeout flag
+ * @arg @ref SMARTCARD_FLAG_TXE Transmit data register empty flag
+ * @arg @ref SMARTCARD_FLAG_TC Transmission complete flag
+ * @arg @ref SMARTCARD_FLAG_RXNE Receive data register not empty flag
+ * @arg @ref SMARTCARD_FLAG_IDLE Idle line detection flag
+ * @arg @ref SMARTCARD_FLAG_ORE Overrun error flag
+ * @arg @ref SMARTCARD_FLAG_NE Noise error flag
+ * @arg @ref SMARTCARD_FLAG_FE Framing error flag
+ * @arg @ref SMARTCARD_FLAG_PE Parity error flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_SMARTCARD_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__))
+
+/** @brief Enable the specified SmartCard interrupt.
+ * @param __HANDLE__ specifies the SMARTCARD Handle.
+ * @param __INTERRUPT__ specifies the SMARTCARD interrupt to enable.
+ * This parameter can be one of the following values:
+ * @arg @ref SMARTCARD_IT_EOB End of block interrupt
+ * @arg @ref SMARTCARD_IT_RTO Receive timeout interrupt
+ * @arg @ref SMARTCARD_IT_TXE Transmit data register empty interrupt
+ * @arg @ref SMARTCARD_IT_TC Transmission complete interrupt
+ * @arg @ref SMARTCARD_IT_TCBGT Transmission complete before guard time interrupt (when interruption available)
+ * @arg @ref SMARTCARD_IT_RXNE Receive data register not empty interrupt
+ * @arg @ref SMARTCARD_IT_IDLE Idle line detection interrupt
+ * @arg @ref SMARTCARD_IT_PE Parity error interrupt
+ * @arg @ref SMARTCARD_IT_ERR Error interrupt(frame error, noise error, overrun error)
+ * @retval None
+ */
+#define __HAL_SMARTCARD_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((((__INTERRUPT__) & SMARTCARD_CR_MASK) >> SMARTCARD_CR_POS) == 1U)? ((__HANDLE__)->Instance->CR1 |= ((uint32_t)1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \
+ ((((__INTERRUPT__) & SMARTCARD_CR_MASK) >> SMARTCARD_CR_POS) == 2U)? ((__HANDLE__)->Instance->CR2 |= ((uint32_t)1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \
+ ((__HANDLE__)->Instance->CR3 |= ((uint32_t)1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))))
+
+/** @brief Disable the specified SmartCard interrupt.
+ * @param __HANDLE__ specifies the SMARTCARD Handle.
+ * @param __INTERRUPT__ specifies the SMARTCARD interrupt to disable.
+ * This parameter can be one of the following values:
+ * @arg @ref SMARTCARD_IT_EOB End of block interrupt
+ * @arg @ref SMARTCARD_IT_RTO Receive timeout interrupt
+ * @arg @ref SMARTCARD_IT_TXE Transmit data register empty interrupt
+ * @arg @ref SMARTCARD_IT_TC Transmission complete interrupt
+ * @arg @ref SMARTCARD_IT_TCBGT Transmission complete before guard time interrupt (when interruption available)
+ * @arg @ref SMARTCARD_IT_RXNE Receive data register not empty interrupt
+ * @arg @ref SMARTCARD_IT_IDLE Idle line detection interrupt
+ * @arg @ref SMARTCARD_IT_PE Parity error interrupt
+ * @arg @ref SMARTCARD_IT_ERR Error interrupt(frame error, noise error, overrun error)
+ * @retval None
+ */
+#define __HAL_SMARTCARD_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((((__INTERRUPT__) & SMARTCARD_CR_MASK) >> SMARTCARD_CR_POS) == 1U)? ((__HANDLE__)->Instance->CR1 &= ~ ((uint32_t)1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \
+ ((((__INTERRUPT__) & SMARTCARD_CR_MASK) >> SMARTCARD_CR_POS) == 2U)? ((__HANDLE__)->Instance->CR2 &= ~ ((uint32_t)1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \
+ ((__HANDLE__)->Instance->CR3 &= ~ ((uint32_t)1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))))
+
+/** @brief Check whether the specified SmartCard interrupt has occurred or not.
+ * @param __HANDLE__ specifies the SMARTCARD Handle.
+ * @param __INTERRUPT__ specifies the SMARTCARD interrupt to check.
+ * This parameter can be one of the following values:
+ * @arg @ref SMARTCARD_IT_EOB End of block interrupt
+ * @arg @ref SMARTCARD_IT_RTO Receive timeout interrupt
+ * @arg @ref SMARTCARD_IT_TXE Transmit data register empty interrupt
+ * @arg @ref SMARTCARD_IT_TC Transmission complete interrupt
+ * @arg @ref SMARTCARD_IT_TCBGT Transmission complete before guard time interrupt (when interruption available)
+ * @arg @ref SMARTCARD_IT_RXNE Receive data register not empty interrupt
+ * @arg @ref SMARTCARD_IT_IDLE Idle line detection interrupt
+ * @arg @ref SMARTCARD_IT_PE Parity error interrupt
+ * @arg @ref SMARTCARD_IT_ERR Error interrupt(frame error, noise error, overrun error)
+ * @retval The new state of __INTERRUPT__ (SET or RESET).
+ */
+#define __HAL_SMARTCARD_GET_IT(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->ISR\
+ & ((uint32_t)0x01U << (((__INTERRUPT__) & SMARTCARD_ISR_MASK)>> SMARTCARD_ISR_POS))) != 0U) ? SET : RESET)
+
+/** @brief Check whether the specified SmartCard interrupt source is enabled or not.
+ * @param __HANDLE__ specifies the SMARTCARD Handle.
+ * @param __INTERRUPT__ specifies the SMARTCARD interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg @ref SMARTCARD_IT_EOB End of block interrupt
+ * @arg @ref SMARTCARD_IT_RTO Receive timeout interrupt
+ * @arg @ref SMARTCARD_IT_TXE Transmit data register empty interrupt
+ * @arg @ref SMARTCARD_IT_TC Transmission complete interrupt
+ * @arg @ref SMARTCARD_IT_TCBGT Transmission complete before guard time interrupt (when interruption available)
+ * @arg @ref SMARTCARD_IT_RXNE Receive data register not empty interrupt
+ * @arg @ref SMARTCARD_IT_IDLE Idle line detection interrupt
+ * @arg @ref SMARTCARD_IT_PE Parity error interrupt
+ * @arg @ref SMARTCARD_IT_ERR Error interrupt(frame error, noise error, overrun error)
+ * @retval The new state of __INTERRUPT__ (SET or RESET).
+ */
+#define __HAL_SMARTCARD_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((((((__INTERRUPT__) & SMARTCARD_CR_MASK) >> SMARTCARD_CR_POS) == 0x01U)? (__HANDLE__)->Instance->CR1 : \
+ (((((__INTERRUPT__) & SMARTCARD_CR_MASK) >> SMARTCARD_CR_POS) == 0x02U)? (__HANDLE__)->Instance->CR2 : \
+ (__HANDLE__)->Instance->CR3)) & ((uint32_t)0x01U << (((uint16_t)(__INTERRUPT__)) & SMARTCARD_IT_MASK))) != 0U) ? SET : RESET)
+
+/** @brief Clear the specified SMARTCARD ISR flag, in setting the proper ICR register flag.
+ * @param __HANDLE__ specifies the SMARTCARD Handle.
+ * @param __IT_CLEAR__ specifies the interrupt clear register flag that needs to be set
+ * to clear the corresponding interrupt.
+ * This parameter can be one of the following values:
+ * @arg @ref SMARTCARD_CLEAR_PEF Parity error clear flag
+ * @arg @ref SMARTCARD_CLEAR_FEF Framing error clear flag
+ * @arg @ref SMARTCARD_CLEAR_NEF Noise detected clear flag
+ * @arg @ref SMARTCARD_CLEAR_OREF OverRun error clear flag
+ * @arg @ref SMARTCARD_CLEAR_IDLEF Idle line detection clear flag
+ * @arg @ref SMARTCARD_CLEAR_TCF Transmission complete clear flag
+ * @arg @ref SMARTCARD_CLEAR_TCBGTF Transmission complete before guard time clear flag (when flag available)
+ * @arg @ref SMARTCARD_CLEAR_RTOF Receiver timeout clear flag
+ * @arg @ref SMARTCARD_CLEAR_EOBF End of block clear flag
+ * @retval None
+ */
+#define __HAL_SMARTCARD_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR |= (uint32_t)(__IT_CLEAR__))
+
+/** @brief Set a specific SMARTCARD request flag.
+ * @param __HANDLE__ specifies the SMARTCARD Handle.
+ * @param __REQ__ specifies the request flag to set
+ * This parameter can be one of the following values:
+ * @arg @ref SMARTCARD_RXDATA_FLUSH_REQUEST Receive data flush Request
+ * @arg @ref SMARTCARD_TXDATA_FLUSH_REQUEST Transmit data flush Request
+ * @retval None
+ */
+#define __HAL_SMARTCARD_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint16_t)(__REQ__))
+
+/** @brief Enable the SMARTCARD one bit sample method.
+ * @param __HANDLE__ specifies the SMARTCARD Handle.
+ * @retval None
+ */
+#define __HAL_SMARTCARD_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT)
+
+/** @brief Disable the SMARTCARD one bit sample method.
+ * @param __HANDLE__ specifies the SMARTCARD Handle.
+ * @retval None
+ */
+#define __HAL_SMARTCARD_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3\
+ &= (uint32_t)~((uint32_t)USART_CR3_ONEBIT))
+
+/** @brief Enable the USART associated to the SMARTCARD Handle.
+ * @param __HANDLE__ specifies the SMARTCARD Handle.
+ * @retval None
+ */
+#define __HAL_SMARTCARD_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE)
+
+/** @brief Disable the USART associated to the SMARTCARD Handle
+ * @param __HANDLE__ specifies the SMARTCARD Handle.
+ * @retval None
+ */
+#define __HAL_SMARTCARD_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE)
+
+/**
+ * @}
+ */
+
+/* Private macros -------------------------------------------------------------*/
+/** @defgroup SMARTCARD_Private_Macros SMARTCARD Private Macros
+ * @{
+ */
+
+
+/** @brief Check the Baud rate range.
+ * @note The maximum Baud Rate is derived from the maximum clock on F0 (48 MHz)
+ * divided by the oversampling used on the SMARTCARD (i.e. 16).
+ * @param __BAUDRATE__ Baud rate set by the configuration function.
+ * @retval Test result (TRUE or FALSE)
+ */
+#define IS_SMARTCARD_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) < 6000000U)
+
+/** @brief Check the block length range.
+ * @note The maximum SMARTCARD block length is 0xFF.
+ * @param __LENGTH__ block length.
+ * @retval Test result (TRUE or FALSE)
+ */
+#define IS_SMARTCARD_BLOCKLENGTH(__LENGTH__) ((__LENGTH__) <= 0xFFU)
+
+/** @brief Check the receiver timeout value.
+ * @note The maximum SMARTCARD receiver timeout value is 0xFFFFFF.
+ * @param __TIMEOUTVALUE__ receiver timeout value.
+ * @retval Test result (TRUE or FALSE)
+ */
+#define IS_SMARTCARD_TIMEOUT_VALUE(__TIMEOUTVALUE__) ((__TIMEOUTVALUE__) <= 0xFFFFFFU)
+
+/** @brief Check the SMARTCARD autoretry counter value.
+ * @note The maximum number of retransmissions is 0x7.
+ * @param __COUNT__ number of retransmissions.
+ * @retval Test result (TRUE or FALSE)
+ */
+#define IS_SMARTCARD_AUTORETRY_COUNT(__COUNT__) ((__COUNT__) <= 0x7U)
+
+/** @brief Ensure that SMARTCARD frame length is valid.
+ * @param __LENGTH__ SMARTCARD frame length.
+ * @retval SET (__LENGTH__ is valid) or RESET (__LENGTH__ is invalid)
+ */
+#define IS_SMARTCARD_WORD_LENGTH(__LENGTH__) ((__LENGTH__) == SMARTCARD_WORDLENGTH_9B)
+
+/** @brief Ensure that SMARTCARD frame number of stop bits is valid.
+ * @param __STOPBITS__ SMARTCARD frame number of stop bits.
+ * @retval SET (__STOPBITS__ is valid) or RESET (__STOPBITS__ is invalid)
+ */
+#define IS_SMARTCARD_STOPBITS(__STOPBITS__) (((__STOPBITS__) == SMARTCARD_STOPBITS_0_5) ||\
+ ((__STOPBITS__) == SMARTCARD_STOPBITS_1_5))
+
+/** @brief Ensure that SMARTCARD frame parity is valid.
+ * @param __PARITY__ SMARTCARD frame parity.
+ * @retval SET (__PARITY__ is valid) or RESET (__PARITY__ is invalid)
+ */
+#define IS_SMARTCARD_PARITY(__PARITY__) (((__PARITY__) == SMARTCARD_PARITY_EVEN) || \
+ ((__PARITY__) == SMARTCARD_PARITY_ODD))
+
+/** @brief Ensure that SMARTCARD communication mode is valid.
+ * @param __MODE__ SMARTCARD communication mode.
+ * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid)
+ */
+#define IS_SMARTCARD_MODE(__MODE__) ((((__MODE__) & 0xFFF3U) == 0x00U) && ((__MODE__) != 0x00U))
+
+/** @brief Ensure that SMARTCARD frame polarity is valid.
+ * @param __CPOL__ SMARTCARD frame polarity.
+ * @retval SET (__CPOL__ is valid) or RESET (__CPOL__ is invalid)
+ */
+#define IS_SMARTCARD_POLARITY(__CPOL__) (((__CPOL__) == SMARTCARD_POLARITY_LOW)\
+ || ((__CPOL__) == SMARTCARD_POLARITY_HIGH))
+
+/** @brief Ensure that SMARTCARD frame phase is valid.
+ * @param __CPHA__ SMARTCARD frame phase.
+ * @retval SET (__CPHA__ is valid) or RESET (__CPHA__ is invalid)
+ */
+#define IS_SMARTCARD_PHASE(__CPHA__) (((__CPHA__) == SMARTCARD_PHASE_1EDGE) || ((__CPHA__) == SMARTCARD_PHASE_2EDGE))
+
+/** @brief Ensure that SMARTCARD frame last bit clock pulse setting is valid.
+ * @param __LASTBIT__ SMARTCARD frame last bit clock pulse setting.
+ * @retval SET (__LASTBIT__ is valid) or RESET (__LASTBIT__ is invalid)
+ */
+#define IS_SMARTCARD_LASTBIT(__LASTBIT__) (((__LASTBIT__) == SMARTCARD_LASTBIT_DISABLE) || \
+ ((__LASTBIT__) == SMARTCARD_LASTBIT_ENABLE))
+
+/** @brief Ensure that SMARTCARD frame sampling is valid.
+ * @param __ONEBIT__ SMARTCARD frame sampling.
+ * @retval SET (__ONEBIT__ is valid) or RESET (__ONEBIT__ is invalid)
+ */
+#define IS_SMARTCARD_ONE_BIT_SAMPLE(__ONEBIT__) (((__ONEBIT__) == SMARTCARD_ONE_BIT_SAMPLE_DISABLE) || \
+ ((__ONEBIT__) == SMARTCARD_ONE_BIT_SAMPLE_ENABLE))
+
+/** @brief Ensure that SMARTCARD NACK transmission setting is valid.
+ * @param __NACK__ SMARTCARD NACK transmission setting.
+ * @retval SET (__NACK__ is valid) or RESET (__NACK__ is invalid)
+ */
+#define IS_SMARTCARD_NACK(__NACK__) (((__NACK__) == SMARTCARD_NACK_ENABLE) || \
+ ((__NACK__) == SMARTCARD_NACK_DISABLE))
+
+/** @brief Ensure that SMARTCARD receiver timeout setting is valid.
+ * @param __TIMEOUT__ SMARTCARD receiver timeout setting.
+ * @retval SET (__TIMEOUT__ is valid) or RESET (__TIMEOUT__ is invalid)
+ */
+#define IS_SMARTCARD_TIMEOUT(__TIMEOUT__) (((__TIMEOUT__) == SMARTCARD_TIMEOUT_DISABLE) || \
+ ((__TIMEOUT__) == SMARTCARD_TIMEOUT_ENABLE))
+
+/** @brief Ensure that SMARTCARD advanced features initialization is valid.
+ * @param __INIT__ SMARTCARD advanced features initialization.
+ * @retval SET (__INIT__ is valid) or RESET (__INIT__ is invalid)
+ */
+#define IS_SMARTCARD_ADVFEATURE_INIT(__INIT__) ((__INIT__) <= (SMARTCARD_ADVFEATURE_NO_INIT | \
+ SMARTCARD_ADVFEATURE_TXINVERT_INIT | \
+ SMARTCARD_ADVFEATURE_RXINVERT_INIT | \
+ SMARTCARD_ADVFEATURE_DATAINVERT_INIT | \
+ SMARTCARD_ADVFEATURE_SWAP_INIT | \
+ SMARTCARD_ADVFEATURE_RXOVERRUNDISABLE_INIT | \
+ SMARTCARD_ADVFEATURE_DMADISABLEONERROR_INIT | \
+ SMARTCARD_ADVFEATURE_MSBFIRST_INIT))
+
+/** @brief Ensure that SMARTCARD frame TX inversion setting is valid.
+ * @param __TXINV__ SMARTCARD frame TX inversion setting.
+ * @retval SET (__TXINV__ is valid) or RESET (__TXINV__ is invalid)
+ */
+#define IS_SMARTCARD_ADVFEATURE_TXINV(__TXINV__) (((__TXINV__) == SMARTCARD_ADVFEATURE_TXINV_DISABLE) || \
+ ((__TXINV__) == SMARTCARD_ADVFEATURE_TXINV_ENABLE))
+
+/** @brief Ensure that SMARTCARD frame RX inversion setting is valid.
+ * @param __RXINV__ SMARTCARD frame RX inversion setting.
+ * @retval SET (__RXINV__ is valid) or RESET (__RXINV__ is invalid)
+ */
+#define IS_SMARTCARD_ADVFEATURE_RXINV(__RXINV__) (((__RXINV__) == SMARTCARD_ADVFEATURE_RXINV_DISABLE) || \
+ ((__RXINV__) == SMARTCARD_ADVFEATURE_RXINV_ENABLE))
+
+/** @brief Ensure that SMARTCARD frame data inversion setting is valid.
+ * @param __DATAINV__ SMARTCARD frame data inversion setting.
+ * @retval SET (__DATAINV__ is valid) or RESET (__DATAINV__ is invalid)
+ */
+#define IS_SMARTCARD_ADVFEATURE_DATAINV(__DATAINV__) (((__DATAINV__) == SMARTCARD_ADVFEATURE_DATAINV_DISABLE) || \
+ ((__DATAINV__) == SMARTCARD_ADVFEATURE_DATAINV_ENABLE))
+
+/** @brief Ensure that SMARTCARD frame RX/TX pins swap setting is valid.
+ * @param __SWAP__ SMARTCARD frame RX/TX pins swap setting.
+ * @retval SET (__SWAP__ is valid) or RESET (__SWAP__ is invalid)
+ */
+#define IS_SMARTCARD_ADVFEATURE_SWAP(__SWAP__) (((__SWAP__) == SMARTCARD_ADVFEATURE_SWAP_DISABLE) || \
+ ((__SWAP__) == SMARTCARD_ADVFEATURE_SWAP_ENABLE))
+
+/** @brief Ensure that SMARTCARD frame overrun setting is valid.
+ * @param __OVERRUN__ SMARTCARD frame overrun setting.
+ * @retval SET (__OVERRUN__ is valid) or RESET (__OVERRUN__ is invalid)
+ */
+#define IS_SMARTCARD_OVERRUN(__OVERRUN__) (((__OVERRUN__) == SMARTCARD_ADVFEATURE_OVERRUN_ENABLE) || \
+ ((__OVERRUN__) == SMARTCARD_ADVFEATURE_OVERRUN_DISABLE))
+
+/** @brief Ensure that SMARTCARD DMA enabling or disabling on error setting is valid.
+ * @param __DMA__ SMARTCARD DMA enabling or disabling on error setting.
+ * @retval SET (__DMA__ is valid) or RESET (__DMA__ is invalid)
+ */
+#define IS_SMARTCARD_ADVFEATURE_DMAONRXERROR(__DMA__) (((__DMA__) == SMARTCARD_ADVFEATURE_DMA_ENABLEONRXERROR) || \
+ ((__DMA__) == SMARTCARD_ADVFEATURE_DMA_DISABLEONRXERROR))
+
+/** @brief Ensure that SMARTCARD frame MSB first setting is valid.
+ * @param __MSBFIRST__ SMARTCARD frame MSB first setting.
+ * @retval SET (__MSBFIRST__ is valid) or RESET (__MSBFIRST__ is invalid)
+ */
+#define IS_SMARTCARD_ADVFEATURE_MSBFIRST(__MSBFIRST__) (((__MSBFIRST__) == SMARTCARD_ADVFEATURE_MSBFIRST_DISABLE) || \
+ ((__MSBFIRST__) == SMARTCARD_ADVFEATURE_MSBFIRST_ENABLE))
+
+/** @brief Ensure that SMARTCARD request parameter is valid.
+ * @param __PARAM__ SMARTCARD request parameter.
+ * @retval SET (__PARAM__ is valid) or RESET (__PARAM__ is invalid)
+ */
+#define IS_SMARTCARD_REQUEST_PARAMETER(__PARAM__) (((__PARAM__) == SMARTCARD_RXDATA_FLUSH_REQUEST) || \
+ ((__PARAM__) == SMARTCARD_TXDATA_FLUSH_REQUEST))
+
+/**
+ * @}
+ */
+
+/* Include SMARTCARD HAL Extended module */
+#include "stm32f0xx_hal_smartcard_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup SMARTCARD_Exported_Functions
+ * @{
+ */
+
+/* Initialization and de-initialization functions ****************************/
+/** @addtogroup SMARTCARD_Exported_Functions_Group1
+ * @{
+ */
+
+HAL_StatusTypeDef HAL_SMARTCARD_Init(SMARTCARD_HandleTypeDef *hsmartcard);
+HAL_StatusTypeDef HAL_SMARTCARD_DeInit(SMARTCARD_HandleTypeDef *hsmartcard);
+void HAL_SMARTCARD_MspInit(SMARTCARD_HandleTypeDef *hsmartcard);
+void HAL_SMARTCARD_MspDeInit(SMARTCARD_HandleTypeDef *hsmartcard);
+
+#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1)
+/* Callbacks Register/UnRegister functions ***********************************/
+HAL_StatusTypeDef HAL_SMARTCARD_RegisterCallback(SMARTCARD_HandleTypeDef *hsmartcard,
+ HAL_SMARTCARD_CallbackIDTypeDef CallbackID, pSMARTCARD_CallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_SMARTCARD_UnRegisterCallback(SMARTCARD_HandleTypeDef *hsmartcard,
+ HAL_SMARTCARD_CallbackIDTypeDef CallbackID);
+#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */
+
+/**
+ * @}
+ */
+
+/* IO operation functions *****************************************************/
+/** @addtogroup SMARTCARD_Exported_Functions_Group2
+ * @{
+ */
+
+HAL_StatusTypeDef HAL_SMARTCARD_Transmit(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size,
+ uint32_t Timeout);
+HAL_StatusTypeDef HAL_SMARTCARD_Receive(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size,
+ uint32_t Timeout);
+HAL_StatusTypeDef HAL_SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SMARTCARD_Transmit_DMA(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SMARTCARD_Receive_DMA(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size);
+/* Transfer Abort functions */
+HAL_StatusTypeDef HAL_SMARTCARD_Abort(SMARTCARD_HandleTypeDef *hsmartcard);
+HAL_StatusTypeDef HAL_SMARTCARD_AbortTransmit(SMARTCARD_HandleTypeDef *hsmartcard);
+HAL_StatusTypeDef HAL_SMARTCARD_AbortReceive(SMARTCARD_HandleTypeDef *hsmartcard);
+HAL_StatusTypeDef HAL_SMARTCARD_Abort_IT(SMARTCARD_HandleTypeDef *hsmartcard);
+HAL_StatusTypeDef HAL_SMARTCARD_AbortTransmit_IT(SMARTCARD_HandleTypeDef *hsmartcard);
+HAL_StatusTypeDef HAL_SMARTCARD_AbortReceive_IT(SMARTCARD_HandleTypeDef *hsmartcard);
+
+void HAL_SMARTCARD_IRQHandler(SMARTCARD_HandleTypeDef *hsmartcard);
+void HAL_SMARTCARD_TxCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard);
+void HAL_SMARTCARD_RxCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard);
+void HAL_SMARTCARD_ErrorCallback(SMARTCARD_HandleTypeDef *hsmartcard);
+void HAL_SMARTCARD_AbortCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard);
+void HAL_SMARTCARD_AbortTransmitCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard);
+void HAL_SMARTCARD_AbortReceiveCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard);
+
+/**
+ * @}
+ */
+
+/* Peripheral State and Error functions ***************************************/
+/** @addtogroup SMARTCARD_Exported_Functions_Group4
+ * @{
+ */
+
+HAL_SMARTCARD_StateTypeDef HAL_SMARTCARD_GetState(SMARTCARD_HandleTypeDef *hsmartcard);
+uint32_t HAL_SMARTCARD_GetError(SMARTCARD_HandleTypeDef *hsmartcard);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32F0xx_HAL_SMARTCARD_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_smartcard_ex.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_smartcard_ex.h
new file mode 100644
index 0000000..eaf7a9c
--- /dev/null
+++ b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_smartcard_ex.h
@@ -0,0 +1,568 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_smartcard_ex.h
+ * @author MCD Application Team
+ * @brief Header file of SMARTCARD HAL Extended module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32F0xx_HAL_SMARTCARD_EX_H
+#define STM32F0xx_HAL_SMARTCARD_EX_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup SMARTCARDEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/** @addtogroup SMARTCARDEx_Exported_Constants SMARTCARD Extended Exported Constants
+ * @{
+ */
+
+/** @defgroup SMARTCARDEx_Transmission_Completion_Indication SMARTCARD Transmission Completion Indication
+ * @{
+ */
+#if defined(USART_TCBGT_SUPPORT)
+#define SMARTCARD_TCBGT SMARTCARD_IT_TCBGT /*!< SMARTCARD transmission complete before guard time */
+#endif /* USART_TCBGT_SUPPORT */
+#define SMARTCARD_TC SMARTCARD_IT_TC /*!< SMARTCARD transmission complete (flag raised when guard time has elapsed) */
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARDEx_Advanced_Features_Initialization_Type SMARTCARD advanced feature initialization type
+ * @{
+ */
+#define SMARTCARD_ADVFEATURE_NO_INIT 0x00000000U /*!< No advanced feature initialization */
+#define SMARTCARD_ADVFEATURE_TXINVERT_INIT 0x00000001U /*!< TX pin active level inversion */
+#define SMARTCARD_ADVFEATURE_RXINVERT_INIT 0x00000002U /*!< RX pin active level inversion */
+#define SMARTCARD_ADVFEATURE_DATAINVERT_INIT 0x00000004U /*!< Binary data inversion */
+#define SMARTCARD_ADVFEATURE_SWAP_INIT 0x00000008U /*!< TX/RX pins swap */
+#define SMARTCARD_ADVFEATURE_RXOVERRUNDISABLE_INIT 0x00000010U /*!< RX overrun disable */
+#define SMARTCARD_ADVFEATURE_DMADISABLEONERROR_INIT 0x00000020U /*!< DMA disable on Reception Error */
+#define SMARTCARD_ADVFEATURE_MSBFIRST_INIT 0x00000080U /*!< Most significant bit sent/received first */
+#if defined(USART_TCBGT_SUPPORT)
+#define SMARTCARD_ADVFEATURE_TXCOMPLETION 0x00000100U /*!< TX completion indication before of after guard time */
+#endif /* USART_TCBGT_SUPPORT */
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARDEx_Flags SMARTCARD Flags
+ * Elements values convention: 0xXXXX
+ * - 0xXXXX : Flag mask in the ISR register
+ * @{
+ */
+#if defined(USART_TCBGT_SUPPORT)
+#define SMARTCARD_FLAG_TCBGT USART_ISR_TCBGT /*!< SMARTCARD transmission complete before guard time completion */
+#endif /* USART_TCBGT_SUPPORT */
+#define SMARTCARD_FLAG_REACK USART_ISR_REACK /*!< SMARTCARD receive enable acknowledge flag */
+#define SMARTCARD_FLAG_TEACK USART_ISR_TEACK /*!< SMARTCARD transmit enable acknowledge flag */
+#define SMARTCARD_FLAG_BUSY USART_ISR_BUSY /*!< SMARTCARD busy flag */
+#define SMARTCARD_FLAG_EOBF USART_ISR_EOBF /*!< SMARTCARD end of block flag */
+#define SMARTCARD_FLAG_RTOF USART_ISR_RTOF /*!< SMARTCARD receiver timeout flag */
+#define SMARTCARD_FLAG_TXE USART_ISR_TXE /*!< SMARTCARD transmit data register empty */
+#define SMARTCARD_FLAG_TC USART_ISR_TC /*!< SMARTCARD transmission complete */
+#define SMARTCARD_FLAG_RXNE USART_ISR_RXNE /*!< SMARTCARD read data register not empty */
+#define SMARTCARD_FLAG_IDLE USART_ISR_IDLE /*!< SMARTCARD idle line detection */
+#define SMARTCARD_FLAG_ORE USART_ISR_ORE /*!< SMARTCARD overrun error */
+#define SMARTCARD_FLAG_NE USART_ISR_NE /*!< SMARTCARD noise error */
+#define SMARTCARD_FLAG_FE USART_ISR_FE /*!< SMARTCARD frame error */
+#define SMARTCARD_FLAG_PE USART_ISR_PE /*!< SMARTCARD parity error */
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARDEx_Interrupt_definition SMARTCARD Interrupts Definition
+ * Elements values convention: 000ZZZZZ0XXYYYYYb
+ * - YYYYY : Interrupt source position in the XX register (5 bits)
+ * - XX : Interrupt source register (2 bits)
+ * - 01: CR1 register
+ * - 10: CR2 register
+ * - 11: CR3 register
+ * - ZZZZZ : Flag position in the ISR register(5 bits)
+ * @{
+ */
+#define SMARTCARD_IT_PE 0x0028U /*!< SMARTCARD parity error interruption */
+#define SMARTCARD_IT_TXE 0x0727U /*!< SMARTCARD transmit data register empty interruption */
+#define SMARTCARD_IT_TC 0x0626U /*!< SMARTCARD transmission complete interruption */
+#define SMARTCARD_IT_RXNE 0x0525U /*!< SMARTCARD read data register not empty interruption */
+#define SMARTCARD_IT_IDLE 0x0424U /*!< SMARTCARD idle line detection interruption */
+
+#define SMARTCARD_IT_ERR 0x0060U /*!< SMARTCARD error interruption */
+#define SMARTCARD_IT_ORE 0x0300U /*!< SMARTCARD overrun error interruption */
+#define SMARTCARD_IT_NE 0x0200U /*!< SMARTCARD noise error interruption */
+#define SMARTCARD_IT_FE 0x0100U /*!< SMARTCARD frame error interruption */
+
+#define SMARTCARD_IT_EOB 0x0C3BU /*!< SMARTCARD end of block interruption */
+#define SMARTCARD_IT_RTO 0x0B3AU /*!< SMARTCARD receiver timeout interruption */
+#if defined(USART_TCBGT_SUPPORT)
+#define SMARTCARD_IT_TCBGT 0x1978U /*!< SMARTCARD transmission complete before guard time completion interruption */
+#endif /* USART_TCBGT_SUPPORT */
+
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARDEx_IT_CLEAR_Flags SMARTCARD Interruption Clear Flags
+ * @{
+ */
+#define SMARTCARD_CLEAR_PEF USART_ICR_PECF /*!< SMARTCARD parity error clear flag */
+#define SMARTCARD_CLEAR_FEF USART_ICR_FECF /*!< SMARTCARD framing error clear flag */
+#define SMARTCARD_CLEAR_NEF USART_ICR_NCF /*!< SMARTCARD noise error detected clear flag */
+#define SMARTCARD_CLEAR_OREF USART_ICR_ORECF /*!< SMARTCARD overrun error clear flag */
+#define SMARTCARD_CLEAR_IDLEF USART_ICR_IDLECF /*!< SMARTCARD idle line detected clear flag */
+#define SMARTCARD_CLEAR_TCF USART_ICR_TCCF /*!< SMARTCARD transmission complete clear flag */
+#if defined(USART_TCBGT_SUPPORT)
+#define SMARTCARD_CLEAR_TCBGTF USART_ICR_TCBGTCF /*!< SMARTCARD transmission complete before guard time completion clear flag */
+#endif /* USART_TCBGT_SUPPORT */
+#define SMARTCARD_CLEAR_RTOF USART_ICR_RTOCF /*!< SMARTCARD receiver time out clear flag */
+#define SMARTCARD_CLEAR_EOBF USART_ICR_EOBCF /*!< SMARTCARD end of block clear flag */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Exported macros -----------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup SMARTCARDEx_Private_Macros SMARTCARD Extended Private Macros
+ * @{
+ */
+
+/** @brief Report the SMARTCARD clock source.
+ * @param __HANDLE__ specifies the SMARTCARD Handle.
+ * @param __CLOCKSOURCE__ output variable.
+ * @retval the SMARTCARD clocking source, written in __CLOCKSOURCE__.
+ */
+#if defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx)
+#define SMARTCARD_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } while(0)
+#elif defined (STM32F030x8) || defined (STM32F070x6) || defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F051x8) || defined (STM32F058xx)
+#define SMARTCARD_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \
+ } \
+ else \
+ { \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_UNDEFINED; \
+ } \
+ } while(0)
+#elif defined (STM32F070xB)
+#define SMARTCARD_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART3) \
+ { \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART4) \
+ { \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \
+ } \
+ else \
+ { \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_UNDEFINED; \
+ } \
+ } while(0)
+#elif defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)
+#define SMARTCARD_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ switch(__HAL_RCC_GET_USART2_SOURCE()) \
+ { \
+ case RCC_USART2CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART2CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART2CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART2CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART3) \
+ { \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART4) \
+ { \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \
+ } \
+ else \
+ { \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_UNDEFINED; \
+ } \
+ } while(0)
+#elif defined(STM32F091xC) || defined (STM32F098xx)
+#define SMARTCARD_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ switch(__HAL_RCC_GET_USART2_SOURCE()) \
+ { \
+ case RCC_USART2CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART2CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART2CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART2CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART3) \
+ { \
+ switch(__HAL_RCC_GET_USART3_SOURCE()) \
+ { \
+ case RCC_USART3CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART3CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART3CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART3CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART4) \
+ { \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART5) \
+ { \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART6) \
+ { \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART7) \
+ { \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART8) \
+ { \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \
+ } \
+ else \
+ { \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_UNDEFINED; \
+ } \
+ } while(0)
+#elif defined(STM32F030xC)
+#define SMARTCARD_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART3) \
+ { \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART4) \
+ { \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART5) \
+ { \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART6) \
+ { \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \
+ } \
+ else \
+ { \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_UNDEFINED; \
+ } \
+ } while(0)
+#endif /* defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx) */
+/** @brief Set the Transmission Completion flag
+ * @param __HANDLE__ specifies the SMARTCARD Handle.
+ * @note If TCBGT (Transmission Complete Before Guard Time) flag is not available or if
+ * AdvancedInit.TxCompletionIndication is not already filled, the latter is forced
+ * to SMARTCARD_TC (transmission completion indication when guard time has elapsed).
+ * @retval None
+ */
+#if defined(USART_TCBGT_SUPPORT)
+#define SMARTCARD_TRANSMISSION_COMPLETION_SETTING(__HANDLE__) \
+ do { \
+ if (HAL_IS_BIT_CLR((__HANDLE__)->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_TXCOMPLETION)) \
+ { \
+ (__HANDLE__)->AdvancedInit.TxCompletionIndication = SMARTCARD_TC; \
+ } \
+ else \
+ { \
+ assert_param(IS_SMARTCARD_TRANSMISSION_COMPLETION((__HANDLE__)->AdvancedInit.TxCompletionIndication)); \
+ } \
+ } while(0U)
+#else
+#define SMARTCARD_TRANSMISSION_COMPLETION_SETTING(__HANDLE__) \
+ do { \
+ (__HANDLE__)->AdvancedInit.TxCompletionIndication = SMARTCARD_TC; \
+ } while(0U)
+#endif /* USART_TCBGT_SUPPORT */
+
+/** @brief Return the transmission completion flag.
+ * @param __HANDLE__ specifies the SMARTCARD Handle.
+ * @note Based on AdvancedInit.TxCompletionIndication setting, return TC or TCBGT flag.
+ * When TCBGT flag (Transmission Complete Before Guard Time) is not available, TC flag is
+ * reported.
+ * @retval Transmission completion flag
+ */
+#if defined(USART_TCBGT_SUPPORT)
+#define SMARTCARD_TRANSMISSION_COMPLETION_FLAG(__HANDLE__) \
+ (((__HANDLE__)->AdvancedInit.TxCompletionIndication == SMARTCARD_TC) ? (SMARTCARD_FLAG_TC) : (SMARTCARD_FLAG_TCBGT))
+#else
+#define SMARTCARD_TRANSMISSION_COMPLETION_FLAG(__HANDLE__) (SMARTCARD_FLAG_TC)
+#endif /* USART_TCBGT_SUPPORT */
+
+
+/** @brief Ensure that SMARTCARD frame transmission completion used flag is valid.
+ * @param __TXCOMPLETE__ SMARTCARD frame transmission completion used flag.
+ * @retval SET (__TXCOMPLETE__ is valid) or RESET (__TXCOMPLETE__ is invalid)
+ */
+#if defined(USART_TCBGT_SUPPORT)
+#define IS_SMARTCARD_TRANSMISSION_COMPLETION(__TXCOMPLETE__) (((__TXCOMPLETE__) == SMARTCARD_TCBGT) || \
+ ((__TXCOMPLETE__) == SMARTCARD_TC))
+#else
+#define IS_SMARTCARD_TRANSMISSION_COMPLETION(__TXCOMPLETE__) ((__TXCOMPLETE__) == SMARTCARD_TC)
+#endif /* USART_TCBGT_SUPPORT */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup SMARTCARDEx_Exported_Functions
+ * @{
+ */
+
+/* Initialization and de-initialization functions ****************************/
+/* IO operation methods *******************************************************/
+
+/** @addtogroup SMARTCARDEx_Exported_Functions_Group1
+ * @{
+ */
+
+/* Peripheral Control functions ***********************************************/
+void HAL_SMARTCARDEx_BlockLength_Config(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t BlockLength);
+void HAL_SMARTCARDEx_TimeOut_Config(SMARTCARD_HandleTypeDef *hsmartcard, uint32_t TimeOutValue);
+HAL_StatusTypeDef HAL_SMARTCARDEx_EnableReceiverTimeOut(SMARTCARD_HandleTypeDef *hsmartcard);
+HAL_StatusTypeDef HAL_SMARTCARDEx_DisableReceiverTimeOut(SMARTCARD_HandleTypeDef *hsmartcard);
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup SMARTCARDEx_Exported_Functions_Group2
+ * @{
+ */
+
+/* IO operation functions *****************************************************/
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32F0xx_HAL_SMARTCARD_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_smbus.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_smbus.h
new file mode 100644
index 0000000..17939a6
--- /dev/null
+++ b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_smbus.h
@@ -0,0 +1,743 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_smbus.h
+ * @author MCD Application Team
+ * @brief Header file of SMBUS HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32F0xx_HAL_SMBUS_H
+#define STM32F0xx_HAL_SMBUS_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup SMBUS
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup SMBUS_Exported_Types SMBUS Exported Types
+ * @{
+ */
+
+/** @defgroup SMBUS_Configuration_Structure_definition SMBUS Configuration Structure definition
+ * @brief SMBUS Configuration Structure definition
+ * @{
+ */
+typedef struct
+{
+ uint32_t Timing; /*!< Specifies the SMBUS_TIMINGR_register value.
+ This parameter calculated by referring to SMBUS initialization
+ section in Reference manual */
+ uint32_t AnalogFilter; /*!< Specifies if Analog Filter is enable or not.
+ This parameter can be a value of @ref SMBUS_Analog_Filter */
+
+ uint32_t OwnAddress1; /*!< Specifies the first device own address.
+ This parameter can be a 7-bit or 10-bit address. */
+
+ uint32_t AddressingMode; /*!< Specifies if 7-bit or 10-bit addressing mode for master is selected.
+ This parameter can be a value of @ref SMBUS_addressing_mode */
+
+ uint32_t DualAddressMode; /*!< Specifies if dual addressing mode is selected.
+ This parameter can be a value of @ref SMBUS_dual_addressing_mode */
+
+ uint32_t OwnAddress2; /*!< Specifies the second device own address if dual addressing mode is selected
+ This parameter can be a 7-bit address. */
+
+ uint32_t OwnAddress2Masks; /*!< Specifies the acknoledge mask address second device own address if dual addressing mode is selected
+ This parameter can be a value of @ref SMBUS_own_address2_masks. */
+
+ uint32_t GeneralCallMode; /*!< Specifies if general call mode is selected.
+ This parameter can be a value of @ref SMBUS_general_call_addressing_mode. */
+
+ uint32_t NoStretchMode; /*!< Specifies if nostretch mode is selected.
+ This parameter can be a value of @ref SMBUS_nostretch_mode */
+
+ uint32_t PacketErrorCheckMode; /*!< Specifies if Packet Error Check mode is selected.
+ This parameter can be a value of @ref SMBUS_packet_error_check_mode */
+
+ uint32_t PeripheralMode; /*!< Specifies which mode of Periphal is selected.
+ This parameter can be a value of @ref SMBUS_peripheral_mode */
+
+ uint32_t SMBusTimeout; /*!< Specifies the content of the 32 Bits SMBUS_TIMEOUT_register value.
+ (Enable bits and different timeout values)
+ This parameter calculated by referring to SMBUS initialization
+ section in Reference manual */
+} SMBUS_InitTypeDef;
+/**
+ * @}
+ */
+
+/** @defgroup HAL_state_definition HAL state definition
+ * @brief HAL State definition
+ * @{
+ */
+#define HAL_SMBUS_STATE_RESET (0x00000000U) /*!< SMBUS not yet initialized or disabled */
+#define HAL_SMBUS_STATE_READY (0x00000001U) /*!< SMBUS initialized and ready for use */
+#define HAL_SMBUS_STATE_BUSY (0x00000002U) /*!< SMBUS internal process is ongoing */
+#define HAL_SMBUS_STATE_MASTER_BUSY_TX (0x00000012U) /*!< Master Data Transmission process is ongoing */
+#define HAL_SMBUS_STATE_MASTER_BUSY_RX (0x00000022U) /*!< Master Data Reception process is ongoing */
+#define HAL_SMBUS_STATE_SLAVE_BUSY_TX (0x00000032U) /*!< Slave Data Transmission process is ongoing */
+#define HAL_SMBUS_STATE_SLAVE_BUSY_RX (0x00000042U) /*!< Slave Data Reception process is ongoing */
+#define HAL_SMBUS_STATE_TIMEOUT (0x00000003U) /*!< Timeout state */
+#define HAL_SMBUS_STATE_ERROR (0x00000004U) /*!< Reception process is ongoing */
+#define HAL_SMBUS_STATE_LISTEN (0x00000008U) /*!< Address Listen Mode is ongoing */
+/**
+ * @}
+ */
+
+/** @defgroup SMBUS_Error_Code_definition SMBUS Error Code definition
+ * @brief SMBUS Error Code definition
+ * @{
+ */
+#define HAL_SMBUS_ERROR_NONE (0x00000000U) /*!< No error */
+#define HAL_SMBUS_ERROR_BERR (0x00000001U) /*!< BERR error */
+#define HAL_SMBUS_ERROR_ARLO (0x00000002U) /*!< ARLO error */
+#define HAL_SMBUS_ERROR_ACKF (0x00000004U) /*!< ACKF error */
+#define HAL_SMBUS_ERROR_OVR (0x00000008U) /*!< OVR error */
+#define HAL_SMBUS_ERROR_HALTIMEOUT (0x00000010U) /*!< Timeout error */
+#define HAL_SMBUS_ERROR_BUSTIMEOUT (0x00000020U) /*!< Bus Timeout error */
+#define HAL_SMBUS_ERROR_ALERT (0x00000040U) /*!< Alert error */
+#define HAL_SMBUS_ERROR_PECERR (0x00000080U) /*!< PEC error */
+#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1)
+#define HAL_SMBUS_ERROR_INVALID_CALLBACK (0x00000100U) /*!< Invalid Callback error */
+#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */
+#define HAL_SMBUS_ERROR_INVALID_PARAM (0x00000200U) /*!< Invalid Parameters error */
+/**
+ * @}
+ */
+
+/** @defgroup SMBUS_handle_Structure_definition SMBUS handle Structure definition
+ * @brief SMBUS handle Structure definition
+ * @{
+ */
+typedef struct __SMBUS_HandleTypeDef
+{
+ I2C_TypeDef *Instance; /*!< SMBUS registers base address */
+
+ SMBUS_InitTypeDef Init; /*!< SMBUS communication parameters */
+
+ uint8_t *pBuffPtr; /*!< Pointer to SMBUS transfer buffer */
+
+ uint16_t XferSize; /*!< SMBUS transfer size */
+
+ __IO uint16_t XferCount; /*!< SMBUS transfer counter */
+
+ __IO uint32_t XferOptions; /*!< SMBUS transfer options */
+
+ __IO uint32_t PreviousState; /*!< SMBUS communication Previous state */
+
+ HAL_LockTypeDef Lock; /*!< SMBUS locking object */
+
+ __IO uint32_t State; /*!< SMBUS communication state */
+
+ __IO uint32_t ErrorCode; /*!< SMBUS Error code */
+
+#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1)
+ void (* MasterTxCpltCallback)(struct __SMBUS_HandleTypeDef *hsmbus); /*!< SMBUS Master Tx Transfer completed callback */
+ void (* MasterRxCpltCallback)(struct __SMBUS_HandleTypeDef *hsmbus); /*!< SMBUS Master Rx Transfer completed callback */
+ void (* SlaveTxCpltCallback)(struct __SMBUS_HandleTypeDef *hsmbus); /*!< SMBUS Slave Tx Transfer completed callback */
+ void (* SlaveRxCpltCallback)(struct __SMBUS_HandleTypeDef *hsmbus); /*!< SMBUS Slave Rx Transfer completed callback */
+ void (* ListenCpltCallback)(struct __SMBUS_HandleTypeDef *hsmbus); /*!< SMBUS Listen Complete callback */
+ void (* ErrorCallback)(struct __SMBUS_HandleTypeDef *hsmbus); /*!< SMBUS Error callback */
+
+ void (* AddrCallback)(struct __SMBUS_HandleTypeDef *hsmbus, uint8_t TransferDirection, uint16_t AddrMatchCode); /*!< SMBUS Slave Address Match callback */
+
+ void (* MspInitCallback)(struct __SMBUS_HandleTypeDef *hsmbus); /*!< SMBUS Msp Init callback */
+ void (* MspDeInitCallback)(struct __SMBUS_HandleTypeDef *hsmbus); /*!< SMBUS Msp DeInit callback */
+
+#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */
+} SMBUS_HandleTypeDef;
+
+#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1)
+/**
+ * @brief HAL SMBUS Callback ID enumeration definition
+ */
+typedef enum
+{
+ HAL_SMBUS_MASTER_TX_COMPLETE_CB_ID = 0x00U, /*!< SMBUS Master Tx Transfer completed callback ID */
+ HAL_SMBUS_MASTER_RX_COMPLETE_CB_ID = 0x01U, /*!< SMBUS Master Rx Transfer completed callback ID */
+ HAL_SMBUS_SLAVE_TX_COMPLETE_CB_ID = 0x02U, /*!< SMBUS Slave Tx Transfer completed callback ID */
+ HAL_SMBUS_SLAVE_RX_COMPLETE_CB_ID = 0x03U, /*!< SMBUS Slave Rx Transfer completed callback ID */
+ HAL_SMBUS_LISTEN_COMPLETE_CB_ID = 0x04U, /*!< SMBUS Listen Complete callback ID */
+ HAL_SMBUS_ERROR_CB_ID = 0x05U, /*!< SMBUS Error callback ID */
+
+ HAL_SMBUS_MSPINIT_CB_ID = 0x06U, /*!< SMBUS Msp Init callback ID */
+ HAL_SMBUS_MSPDEINIT_CB_ID = 0x07U /*!< SMBUS Msp DeInit callback ID */
+
+} HAL_SMBUS_CallbackIDTypeDef;
+
+/**
+ * @brief HAL SMBUS Callback pointer definition
+ */
+typedef void (*pSMBUS_CallbackTypeDef)(SMBUS_HandleTypeDef *hsmbus); /*!< pointer to an SMBUS callback function */
+typedef void (*pSMBUS_AddrCallbackTypeDef)(SMBUS_HandleTypeDef *hsmbus, uint8_t TransferDirection, uint16_t AddrMatchCode); /*!< pointer to an SMBUS Address Match callback function */
+
+#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup SMBUS_Exported_Constants SMBUS Exported Constants
+ * @{
+ */
+
+/** @defgroup SMBUS_Analog_Filter SMBUS Analog Filter
+ * @{
+ */
+#define SMBUS_ANALOGFILTER_ENABLE (0x00000000U)
+#define SMBUS_ANALOGFILTER_DISABLE I2C_CR1_ANFOFF
+/**
+ * @}
+ */
+
+/** @defgroup SMBUS_addressing_mode SMBUS addressing mode
+ * @{
+ */
+#define SMBUS_ADDRESSINGMODE_7BIT (0x00000001U)
+#define SMBUS_ADDRESSINGMODE_10BIT (0x00000002U)
+/**
+ * @}
+ */
+
+/** @defgroup SMBUS_dual_addressing_mode SMBUS dual addressing mode
+ * @{
+ */
+
+#define SMBUS_DUALADDRESS_DISABLE (0x00000000U)
+#define SMBUS_DUALADDRESS_ENABLE I2C_OAR2_OA2EN
+/**
+ * @}
+ */
+
+/** @defgroup SMBUS_own_address2_masks SMBUS ownaddress2 masks
+ * @{
+ */
+
+#define SMBUS_OA2_NOMASK ((uint8_t)0x00U)
+#define SMBUS_OA2_MASK01 ((uint8_t)0x01U)
+#define SMBUS_OA2_MASK02 ((uint8_t)0x02U)
+#define SMBUS_OA2_MASK03 ((uint8_t)0x03U)
+#define SMBUS_OA2_MASK04 ((uint8_t)0x04U)
+#define SMBUS_OA2_MASK05 ((uint8_t)0x05U)
+#define SMBUS_OA2_MASK06 ((uint8_t)0x06U)
+#define SMBUS_OA2_MASK07 ((uint8_t)0x07U)
+/**
+ * @}
+ */
+
+
+/** @defgroup SMBUS_general_call_addressing_mode SMBUS general call addressing mode
+ * @{
+ */
+#define SMBUS_GENERALCALL_DISABLE (0x00000000U)
+#define SMBUS_GENERALCALL_ENABLE I2C_CR1_GCEN
+/**
+ * @}
+ */
+
+/** @defgroup SMBUS_nostretch_mode SMBUS nostretch mode
+ * @{
+ */
+#define SMBUS_NOSTRETCH_DISABLE (0x00000000U)
+#define SMBUS_NOSTRETCH_ENABLE I2C_CR1_NOSTRETCH
+/**
+ * @}
+ */
+
+/** @defgroup SMBUS_packet_error_check_mode SMBUS packet error check mode
+ * @{
+ */
+#define SMBUS_PEC_DISABLE (0x00000000U)
+#define SMBUS_PEC_ENABLE I2C_CR1_PECEN
+/**
+ * @}
+ */
+
+/** @defgroup SMBUS_peripheral_mode SMBUS peripheral mode
+ * @{
+ */
+#define SMBUS_PERIPHERAL_MODE_SMBUS_HOST I2C_CR1_SMBHEN
+#define SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE (0x00000000U)
+#define SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE_ARP I2C_CR1_SMBDEN
+/**
+ * @}
+ */
+
+/** @defgroup SMBUS_ReloadEndMode_definition SMBUS ReloadEndMode definition
+ * @{
+ */
+
+#define SMBUS_SOFTEND_MODE (0x00000000U)
+#define SMBUS_RELOAD_MODE I2C_CR2_RELOAD
+#define SMBUS_AUTOEND_MODE I2C_CR2_AUTOEND
+#define SMBUS_SENDPEC_MODE I2C_CR2_PECBYTE
+/**
+ * @}
+ */
+
+/** @defgroup SMBUS_StartStopMode_definition SMBUS StartStopMode definition
+ * @{
+ */
+
+#define SMBUS_NO_STARTSTOP (0x00000000U)
+#define SMBUS_GENERATE_STOP (uint32_t)(0x80000000U | I2C_CR2_STOP)
+#define SMBUS_GENERATE_START_READ (uint32_t)(0x80000000U | I2C_CR2_START | I2C_CR2_RD_WRN)
+#define SMBUS_GENERATE_START_WRITE (uint32_t)(0x80000000U | I2C_CR2_START)
+/**
+ * @}
+ */
+
+/** @defgroup SMBUS_XferOptions_definition SMBUS XferOptions definition
+ * @{
+ */
+
+/* List of XferOptions in usage of :
+ * 1- Restart condition when direction change
+ * 2- No Restart condition in other use cases
+ */
+#define SMBUS_FIRST_FRAME SMBUS_SOFTEND_MODE
+#define SMBUS_NEXT_FRAME ((uint32_t)(SMBUS_RELOAD_MODE | SMBUS_SOFTEND_MODE))
+#define SMBUS_FIRST_AND_LAST_FRAME_NO_PEC SMBUS_AUTOEND_MODE
+#define SMBUS_LAST_FRAME_NO_PEC SMBUS_AUTOEND_MODE
+#define SMBUS_FIRST_AND_LAST_FRAME_WITH_PEC ((uint32_t)(SMBUS_AUTOEND_MODE | SMBUS_SENDPEC_MODE))
+#define SMBUS_LAST_FRAME_WITH_PEC ((uint32_t)(SMBUS_AUTOEND_MODE | SMBUS_SENDPEC_MODE))
+
+/* List of XferOptions in usage of :
+ * 1- Restart condition in all use cases (direction change or not)
+ */
+#define SMBUS_OTHER_FRAME_NO_PEC (0x000000AAU)
+#define SMBUS_OTHER_FRAME_WITH_PEC (0x0000AA00U)
+#define SMBUS_OTHER_AND_LAST_FRAME_NO_PEC (0x00AA0000U)
+#define SMBUS_OTHER_AND_LAST_FRAME_WITH_PEC (0xAA000000U)
+/**
+ * @}
+ */
+
+/** @defgroup SMBUS_Interrupt_configuration_definition SMBUS Interrupt configuration definition
+ * @brief SMBUS Interrupt definition
+ * Elements values convention: 0xXXXXXXXX
+ * - XXXXXXXX : Interrupt control mask
+ * @{
+ */
+#define SMBUS_IT_ERRI I2C_CR1_ERRIE
+#define SMBUS_IT_TCI I2C_CR1_TCIE
+#define SMBUS_IT_STOPI I2C_CR1_STOPIE
+#define SMBUS_IT_NACKI I2C_CR1_NACKIE
+#define SMBUS_IT_ADDRI I2C_CR1_ADDRIE
+#define SMBUS_IT_RXI I2C_CR1_RXIE
+#define SMBUS_IT_TXI I2C_CR1_TXIE
+#define SMBUS_IT_TX (SMBUS_IT_ERRI | SMBUS_IT_TCI | SMBUS_IT_STOPI | SMBUS_IT_NACKI | SMBUS_IT_TXI)
+#define SMBUS_IT_RX (SMBUS_IT_ERRI | SMBUS_IT_TCI | SMBUS_IT_NACKI | SMBUS_IT_RXI)
+#define SMBUS_IT_ALERT (SMBUS_IT_ERRI)
+#define SMBUS_IT_ADDR (SMBUS_IT_ADDRI | SMBUS_IT_STOPI | SMBUS_IT_NACKI)
+/**
+ * @}
+ */
+
+/** @defgroup SMBUS_Flag_definition SMBUS Flag definition
+ * @brief Flag definition
+ * Elements values convention: 0xXXXXYYYY
+ * - XXXXXXXX : Flag mask
+ * @{
+ */
+
+#define SMBUS_FLAG_TXE I2C_ISR_TXE
+#define SMBUS_FLAG_TXIS I2C_ISR_TXIS
+#define SMBUS_FLAG_RXNE I2C_ISR_RXNE
+#define SMBUS_FLAG_ADDR I2C_ISR_ADDR
+#define SMBUS_FLAG_AF I2C_ISR_NACKF
+#define SMBUS_FLAG_STOPF I2C_ISR_STOPF
+#define SMBUS_FLAG_TC I2C_ISR_TC
+#define SMBUS_FLAG_TCR I2C_ISR_TCR
+#define SMBUS_FLAG_BERR I2C_ISR_BERR
+#define SMBUS_FLAG_ARLO I2C_ISR_ARLO
+#define SMBUS_FLAG_OVR I2C_ISR_OVR
+#define SMBUS_FLAG_PECERR I2C_ISR_PECERR
+#define SMBUS_FLAG_TIMEOUT I2C_ISR_TIMEOUT
+#define SMBUS_FLAG_ALERT I2C_ISR_ALERT
+#define SMBUS_FLAG_BUSY I2C_ISR_BUSY
+#define SMBUS_FLAG_DIR I2C_ISR_DIR
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros ------------------------------------------------------------*/
+/** @defgroup SMBUS_Exported_Macros SMBUS Exported Macros
+ * @{
+ */
+
+/** @brief Reset SMBUS handle state.
+ * @param __HANDLE__ specifies the SMBUS Handle.
+ * @retval None
+ */
+#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1)
+#define __HAL_SMBUS_RESET_HANDLE_STATE(__HANDLE__) do{ \
+ (__HANDLE__)->State = HAL_SMBUS_STATE_RESET; \
+ (__HANDLE__)->MspInitCallback = NULL; \
+ (__HANDLE__)->MspDeInitCallback = NULL; \
+ } while(0)
+#else
+#define __HAL_SMBUS_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SMBUS_STATE_RESET)
+#endif
+
+/** @brief Enable the specified SMBUS interrupts.
+ * @param __HANDLE__ specifies the SMBUS Handle.
+ * @param __INTERRUPT__ specifies the interrupt source to enable.
+ * This parameter can be one of the following values:
+ * @arg @ref SMBUS_IT_ERRI Errors interrupt enable
+ * @arg @ref SMBUS_IT_TCI Transfer complete interrupt enable
+ * @arg @ref SMBUS_IT_STOPI STOP detection interrupt enable
+ * @arg @ref SMBUS_IT_NACKI NACK received interrupt enable
+ * @arg @ref SMBUS_IT_ADDRI Address match interrupt enable
+ * @arg @ref SMBUS_IT_RXI RX interrupt enable
+ * @arg @ref SMBUS_IT_TXI TX interrupt enable
+ *
+ * @retval None
+ */
+#define __HAL_SMBUS_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 |= (__INTERRUPT__))
+
+/** @brief Disable the specified SMBUS interrupts.
+ * @param __HANDLE__ specifies the SMBUS Handle.
+ * @param __INTERRUPT__ specifies the interrupt source to disable.
+ * This parameter can be one of the following values:
+ * @arg @ref SMBUS_IT_ERRI Errors interrupt enable
+ * @arg @ref SMBUS_IT_TCI Transfer complete interrupt enable
+ * @arg @ref SMBUS_IT_STOPI STOP detection interrupt enable
+ * @arg @ref SMBUS_IT_NACKI NACK received interrupt enable
+ * @arg @ref SMBUS_IT_ADDRI Address match interrupt enable
+ * @arg @ref SMBUS_IT_RXI RX interrupt enable
+ * @arg @ref SMBUS_IT_TXI TX interrupt enable
+ *
+ * @retval None
+ */
+#define __HAL_SMBUS_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 &= (~(__INTERRUPT__)))
+
+/** @brief Check whether the specified SMBUS interrupt source is enabled or not.
+ * @param __HANDLE__ specifies the SMBUS Handle.
+ * @param __INTERRUPT__ specifies the SMBUS interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg @ref SMBUS_IT_ERRI Errors interrupt enable
+ * @arg @ref SMBUS_IT_TCI Transfer complete interrupt enable
+ * @arg @ref SMBUS_IT_STOPI STOP detection interrupt enable
+ * @arg @ref SMBUS_IT_NACKI NACK received interrupt enable
+ * @arg @ref SMBUS_IT_ADDRI Address match interrupt enable
+ * @arg @ref SMBUS_IT_RXI RX interrupt enable
+ * @arg @ref SMBUS_IT_TXI TX interrupt enable
+ *
+ * @retval The new state of __IT__ (SET or RESET).
+ */
+#define __HAL_SMBUS_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR1 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief Check whether the specified SMBUS flag is set or not.
+ * @param __HANDLE__ specifies the SMBUS Handle.
+ * @param __FLAG__ specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg @ref SMBUS_FLAG_TXE Transmit data register empty
+ * @arg @ref SMBUS_FLAG_TXIS Transmit interrupt status
+ * @arg @ref SMBUS_FLAG_RXNE Receive data register not empty
+ * @arg @ref SMBUS_FLAG_ADDR Address matched (slave mode)
+ * @arg @ref SMBUS_FLAG_AF NACK received flag
+ * @arg @ref SMBUS_FLAG_STOPF STOP detection flag
+ * @arg @ref SMBUS_FLAG_TC Transfer complete (master mode)
+ * @arg @ref SMBUS_FLAG_TCR Transfer complete reload
+ * @arg @ref SMBUS_FLAG_BERR Bus error
+ * @arg @ref SMBUS_FLAG_ARLO Arbitration lost
+ * @arg @ref SMBUS_FLAG_OVR Overrun/Underrun
+ * @arg @ref SMBUS_FLAG_PECERR PEC error in reception
+ * @arg @ref SMBUS_FLAG_TIMEOUT Timeout or Tlow detection flag
+ * @arg @ref SMBUS_FLAG_ALERT SMBus alert
+ * @arg @ref SMBUS_FLAG_BUSY Bus busy
+ * @arg @ref SMBUS_FLAG_DIR Transfer direction (slave mode)
+ *
+ * @retval The new state of __FLAG__ (SET or RESET).
+ */
+#define SMBUS_FLAG_MASK (0x0001FFFFU)
+#define __HAL_SMBUS_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & ((__FLAG__) & SMBUS_FLAG_MASK)) == ((__FLAG__) & SMBUS_FLAG_MASK)) ? SET : RESET)
+
+/** @brief Clear the SMBUS pending flags which are cleared by writing 1 in a specific bit.
+ * @param __HANDLE__ specifies the SMBUS Handle.
+ * @param __FLAG__ specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg @ref SMBUS_FLAG_ADDR Address matched (slave mode)
+ * @arg @ref SMBUS_FLAG_AF NACK received flag
+ * @arg @ref SMBUS_FLAG_STOPF STOP detection flag
+ * @arg @ref SMBUS_FLAG_BERR Bus error
+ * @arg @ref SMBUS_FLAG_ARLO Arbitration lost
+ * @arg @ref SMBUS_FLAG_OVR Overrun/Underrun
+ * @arg @ref SMBUS_FLAG_PECERR PEC error in reception
+ * @arg @ref SMBUS_FLAG_TIMEOUT Timeout or Tlow detection flag
+ * @arg @ref SMBUS_FLAG_ALERT SMBus alert
+ *
+ * @retval None
+ */
+#define __HAL_SMBUS_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__))
+
+/** @brief Enable the specified SMBUS peripheral.
+ * @param __HANDLE__ specifies the SMBUS Handle.
+ * @retval None
+ */
+#define __HAL_SMBUS_ENABLE(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE))
+
+/** @brief Disable the specified SMBUS peripheral.
+ * @param __HANDLE__ specifies the SMBUS Handle.
+ * @retval None
+ */
+#define __HAL_SMBUS_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE))
+
+/** @brief Generate a Non-Acknowledge SMBUS peripheral in Slave mode.
+ * @param __HANDLE__ specifies the SMBUS Handle.
+ * @retval None
+ */
+#define __HAL_SMBUS_GENERATE_NACK(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR2, I2C_CR2_NACK))
+
+/**
+ * @}
+ */
+
+
+/* Private constants ---------------------------------------------------------*/
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup SMBUS_Private_Macro SMBUS Private Macros
+ * @{
+ */
+
+#define IS_SMBUS_ANALOG_FILTER(FILTER) (((FILTER) == SMBUS_ANALOGFILTER_ENABLE) || \
+ ((FILTER) == SMBUS_ANALOGFILTER_DISABLE))
+
+#define IS_SMBUS_DIGITAL_FILTER(FILTER) ((FILTER) <= 0x0000000FU)
+
+#define IS_SMBUS_ADDRESSING_MODE(MODE) (((MODE) == SMBUS_ADDRESSINGMODE_7BIT) || \
+ ((MODE) == SMBUS_ADDRESSINGMODE_10BIT))
+
+#define IS_SMBUS_DUAL_ADDRESS(ADDRESS) (((ADDRESS) == SMBUS_DUALADDRESS_DISABLE) || \
+ ((ADDRESS) == SMBUS_DUALADDRESS_ENABLE))
+
+#define IS_SMBUS_OWN_ADDRESS2_MASK(MASK) (((MASK) == SMBUS_OA2_NOMASK) || \
+ ((MASK) == SMBUS_OA2_MASK01) || \
+ ((MASK) == SMBUS_OA2_MASK02) || \
+ ((MASK) == SMBUS_OA2_MASK03) || \
+ ((MASK) == SMBUS_OA2_MASK04) || \
+ ((MASK) == SMBUS_OA2_MASK05) || \
+ ((MASK) == SMBUS_OA2_MASK06) || \
+ ((MASK) == SMBUS_OA2_MASK07))
+
+#define IS_SMBUS_GENERAL_CALL(CALL) (((CALL) == SMBUS_GENERALCALL_DISABLE) || \
+ ((CALL) == SMBUS_GENERALCALL_ENABLE))
+
+#define IS_SMBUS_NO_STRETCH(STRETCH) (((STRETCH) == SMBUS_NOSTRETCH_DISABLE) || \
+ ((STRETCH) == SMBUS_NOSTRETCH_ENABLE))
+
+#define IS_SMBUS_PEC(PEC) (((PEC) == SMBUS_PEC_DISABLE) || \
+ ((PEC) == SMBUS_PEC_ENABLE))
+
+#define IS_SMBUS_PERIPHERAL_MODE(MODE) (((MODE) == SMBUS_PERIPHERAL_MODE_SMBUS_HOST) || \
+ ((MODE) == SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE) || \
+ ((MODE) == SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE_ARP))
+
+#define IS_SMBUS_TRANSFER_MODE(MODE) (((MODE) == SMBUS_RELOAD_MODE) || \
+ ((MODE) == SMBUS_AUTOEND_MODE) || \
+ ((MODE) == SMBUS_SOFTEND_MODE) || \
+ ((MODE) == SMBUS_SENDPEC_MODE) || \
+ ((MODE) == (SMBUS_RELOAD_MODE | SMBUS_SENDPEC_MODE)) || \
+ ((MODE) == (SMBUS_AUTOEND_MODE | SMBUS_SENDPEC_MODE)) || \
+ ((MODE) == (SMBUS_AUTOEND_MODE | SMBUS_RELOAD_MODE)) || \
+ ((MODE) == (SMBUS_AUTOEND_MODE | SMBUS_SENDPEC_MODE | SMBUS_RELOAD_MODE )))
+
+
+#define IS_SMBUS_TRANSFER_REQUEST(REQUEST) (((REQUEST) == SMBUS_GENERATE_STOP) || \
+ ((REQUEST) == SMBUS_GENERATE_START_READ) || \
+ ((REQUEST) == SMBUS_GENERATE_START_WRITE) || \
+ ((REQUEST) == SMBUS_NO_STARTSTOP))
+
+
+#define IS_SMBUS_TRANSFER_OPTIONS_REQUEST(REQUEST) (IS_SMBUS_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST) || \
+ ((REQUEST) == SMBUS_FIRST_FRAME) || \
+ ((REQUEST) == SMBUS_NEXT_FRAME) || \
+ ((REQUEST) == SMBUS_FIRST_AND_LAST_FRAME_NO_PEC) || \
+ ((REQUEST) == SMBUS_LAST_FRAME_NO_PEC) || \
+ ((REQUEST) == SMBUS_FIRST_AND_LAST_FRAME_WITH_PEC) || \
+ ((REQUEST) == SMBUS_LAST_FRAME_WITH_PEC))
+
+#define IS_SMBUS_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == SMBUS_OTHER_FRAME_NO_PEC) || \
+ ((REQUEST) == SMBUS_OTHER_AND_LAST_FRAME_NO_PEC) || \
+ ((REQUEST) == SMBUS_OTHER_FRAME_WITH_PEC) || \
+ ((REQUEST) == SMBUS_OTHER_AND_LAST_FRAME_WITH_PEC))
+
+#define SMBUS_RESET_CR1(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= (uint32_t)~((uint32_t)(I2C_CR1_SMBHEN | I2C_CR1_SMBDEN | I2C_CR1_PECEN)))
+#define SMBUS_RESET_CR2(__HANDLE__) ((__HANDLE__)->Instance->CR2 &= (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_HEAD10R | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_RD_WRN)))
+
+#define SMBUS_GENERATE_START(__ADDMODE__,__ADDRESS__) (((__ADDMODE__) == SMBUS_ADDRESSINGMODE_7BIT) ? (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | (I2C_CR2_START) | (I2C_CR2_AUTOEND)) & (~I2C_CR2_RD_WRN)) : \
+ (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | (I2C_CR2_ADD10) | (I2C_CR2_START)) & (~I2C_CR2_RD_WRN)))
+
+#define SMBUS_GET_ADDR_MATCH(__HANDLE__) (((__HANDLE__)->Instance->ISR & I2C_ISR_ADDCODE) >> 17U)
+#define SMBUS_GET_DIR(__HANDLE__) (((__HANDLE__)->Instance->ISR & I2C_ISR_DIR) >> 16U)
+#define SMBUS_GET_STOP_MODE(__HANDLE__) ((__HANDLE__)->Instance->CR2 & I2C_CR2_AUTOEND)
+#define SMBUS_GET_PEC_MODE(__HANDLE__) ((__HANDLE__)->Instance->CR2 & I2C_CR2_PECBYTE)
+#define SMBUS_GET_ALERT_ENABLED(__HANDLE__) ((__HANDLE__)->Instance->CR1 & I2C_CR1_ALERTEN)
+
+#define SMBUS_CHECK_FLAG(__ISR__, __FLAG__) ((((__ISR__) & ((__FLAG__) & SMBUS_FLAG_MASK)) == ((__FLAG__) & SMBUS_FLAG_MASK)) ? SET : RESET)
+#define SMBUS_CHECK_IT_SOURCE(__CR1__, __IT__) ((((__CR1__) & (__IT__)) == (__IT__)) ? SET : RESET)
+
+#define IS_SMBUS_OWN_ADDRESS1(ADDRESS1) ((ADDRESS1) <= 0x000003FFU)
+#define IS_SMBUS_OWN_ADDRESS2(ADDRESS2) ((ADDRESS2) <= (uint16_t)0x00FFU)
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup SMBUS_Exported_Functions SMBUS Exported Functions
+ * @{
+ */
+
+/** @addtogroup SMBUS_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+
+/* Initialization and de-initialization functions ****************************/
+HAL_StatusTypeDef HAL_SMBUS_Init(SMBUS_HandleTypeDef *hsmbus);
+HAL_StatusTypeDef HAL_SMBUS_DeInit(SMBUS_HandleTypeDef *hsmbus);
+void HAL_SMBUS_MspInit(SMBUS_HandleTypeDef *hsmbus);
+void HAL_SMBUS_MspDeInit(SMBUS_HandleTypeDef *hsmbus);
+HAL_StatusTypeDef HAL_SMBUS_ConfigAnalogFilter(SMBUS_HandleTypeDef *hsmbus, uint32_t AnalogFilter);
+HAL_StatusTypeDef HAL_SMBUS_ConfigDigitalFilter(SMBUS_HandleTypeDef *hsmbus, uint32_t DigitalFilter);
+
+/* Callbacks Register/UnRegister functions ***********************************/
+#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1)
+HAL_StatusTypeDef HAL_SMBUS_RegisterCallback(SMBUS_HandleTypeDef *hsmbus, HAL_SMBUS_CallbackIDTypeDef CallbackID, pSMBUS_CallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_SMBUS_UnRegisterCallback(SMBUS_HandleTypeDef *hsmbus, HAL_SMBUS_CallbackIDTypeDef CallbackID);
+
+HAL_StatusTypeDef HAL_SMBUS_RegisterAddrCallback(SMBUS_HandleTypeDef *hsmbus, pSMBUS_AddrCallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_SMBUS_UnRegisterAddrCallback(SMBUS_HandleTypeDef *hsmbus);
+#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */
+/**
+ * @}
+ */
+
+/** @addtogroup SMBUS_Exported_Functions_Group2 Input and Output operation functions
+ * @{
+ */
+
+/* IO operation functions *****************************************************/
+/** @addtogroup Blocking_mode_Polling Blocking mode Polling
+ * @{
+ */
+/******* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_SMBUS_IsDeviceReady(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout);
+/**
+ * @}
+ */
+
+/** @addtogroup Non-Blocking_mode_Interrupt Non-Blocking mode Interrupt
+ * @{
+ */
+/******* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_SMBUS_Master_Transmit_IT(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_SMBUS_Master_Receive_IT(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_SMBUS_Master_Abort_IT(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress);
+HAL_StatusTypeDef HAL_SMBUS_Slave_Transmit_IT(SMBUS_HandleTypeDef *hsmbus, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_SMBUS_Slave_Receive_IT(SMBUS_HandleTypeDef *hsmbus, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+
+HAL_StatusTypeDef HAL_SMBUS_EnableAlert_IT(SMBUS_HandleTypeDef *hsmbus);
+HAL_StatusTypeDef HAL_SMBUS_DisableAlert_IT(SMBUS_HandleTypeDef *hsmbus);
+HAL_StatusTypeDef HAL_SMBUS_EnableListen_IT(SMBUS_HandleTypeDef *hsmbus);
+HAL_StatusTypeDef HAL_SMBUS_DisableListen_IT(SMBUS_HandleTypeDef *hsmbus);
+/**
+ * @}
+ */
+
+/** @addtogroup SMBUS_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks
+ * @{
+ */
+/******* SMBUS IRQHandler and Callbacks used in non blocking modes (Interrupt) */
+void HAL_SMBUS_EV_IRQHandler(SMBUS_HandleTypeDef *hsmbus);
+void HAL_SMBUS_ER_IRQHandler(SMBUS_HandleTypeDef *hsmbus);
+void HAL_SMBUS_MasterTxCpltCallback(SMBUS_HandleTypeDef *hsmbus);
+void HAL_SMBUS_MasterRxCpltCallback(SMBUS_HandleTypeDef *hsmbus);
+void HAL_SMBUS_SlaveTxCpltCallback(SMBUS_HandleTypeDef *hsmbus);
+void HAL_SMBUS_SlaveRxCpltCallback(SMBUS_HandleTypeDef *hsmbus);
+void HAL_SMBUS_AddrCallback(SMBUS_HandleTypeDef *hsmbus, uint8_t TransferDirection, uint16_t AddrMatchCode);
+void HAL_SMBUS_ListenCpltCallback(SMBUS_HandleTypeDef *hsmbus);
+void HAL_SMBUS_ErrorCallback(SMBUS_HandleTypeDef *hsmbus);
+
+/**
+ * @}
+ */
+
+/** @addtogroup SMBUS_Exported_Functions_Group3 Peripheral State and Errors functions
+ * @{
+ */
+
+/* Peripheral State and Errors functions **************************************************/
+uint32_t HAL_SMBUS_GetState(SMBUS_HandleTypeDef *hsmbus);
+uint32_t HAL_SMBUS_GetError(SMBUS_HandleTypeDef *hsmbus);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private Functions ---------------------------------------------------------*/
+/** @defgroup SMBUS_Private_Functions SMBUS Private Functions
+ * @{
+ */
+/* Private functions are defined in stm32f0xx_hal_smbus.c file */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* STM32F0xx_HAL_SMBUS_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_spi.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_spi.h
new file mode 100644
index 0000000..5d3e7a4
--- /dev/null
+++ b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_spi.h
@@ -0,0 +1,854 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_spi.h
+ * @author MCD Application Team
+ * @brief Header file of SPI HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32F0xx_HAL_SPI_H
+#define STM32F0xx_HAL_SPI_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup SPI
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup SPI_Exported_Types SPI Exported Types
+ * @{
+ */
+
+/**
+ * @brief SPI Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t Mode; /*!< Specifies the SPI operating mode.
+ This parameter can be a value of @ref SPI_Mode */
+
+ uint32_t Direction; /*!< Specifies the SPI bidirectional mode state.
+ This parameter can be a value of @ref SPI_Direction */
+
+ uint32_t DataSize; /*!< Specifies the SPI data size.
+ This parameter can be a value of @ref SPI_Data_Size */
+
+ uint32_t CLKPolarity; /*!< Specifies the serial clock steady state.
+ This parameter can be a value of @ref SPI_Clock_Polarity */
+
+ uint32_t CLKPhase; /*!< Specifies the clock active edge for the bit capture.
+ This parameter can be a value of @ref SPI_Clock_Phase */
+
+ uint32_t NSS; /*!< Specifies whether the NSS signal is managed by
+ hardware (NSS pin) or by software using the SSI bit.
+ This parameter can be a value of @ref SPI_Slave_Select_management */
+
+ uint32_t BaudRatePrescaler; /*!< Specifies the Baud Rate prescaler value which will be
+ used to configure the transmit and receive SCK clock.
+ This parameter can be a value of @ref SPI_BaudRate_Prescaler
+ @note The communication clock is derived from the master
+ clock. The slave clock does not need to be set. */
+
+ uint32_t FirstBit; /*!< Specifies whether data transfers start from MSB or LSB bit.
+ This parameter can be a value of @ref SPI_MSB_LSB_transmission */
+
+ uint32_t TIMode; /*!< Specifies if the TI mode is enabled or not.
+ This parameter can be a value of @ref SPI_TI_mode */
+
+ uint32_t CRCCalculation; /*!< Specifies if the CRC calculation is enabled or not.
+ This parameter can be a value of @ref SPI_CRC_Calculation */
+
+ uint32_t CRCPolynomial; /*!< Specifies the polynomial used for the CRC calculation.
+ This parameter must be an odd number between Min_Data = 1 and Max_Data = 65535 */
+
+ uint32_t CRCLength; /*!< Specifies the CRC Length used for the CRC calculation.
+ CRC Length is only used with Data8 and Data16, not other data size
+ This parameter can be a value of @ref SPI_CRC_length */
+
+ uint32_t NSSPMode; /*!< Specifies whether the NSSP signal is enabled or not .
+ This parameter can be a value of @ref SPI_NSSP_Mode
+ This mode is activated by the NSSP bit in the SPIx_CR2 register and
+ it takes effect only if the SPI interface is configured as Motorola SPI
+ master (FRF=0) with capture on the first edge (SPIx_CR1 CPHA = 0,
+ CPOL setting is ignored).. */
+} SPI_InitTypeDef;
+
+/**
+ * @brief HAL SPI State structure definition
+ */
+typedef enum
+{
+ HAL_SPI_STATE_RESET = 0x00U, /*!< Peripheral not Initialized */
+ HAL_SPI_STATE_READY = 0x01U, /*!< Peripheral Initialized and ready for use */
+ HAL_SPI_STATE_BUSY = 0x02U, /*!< an internal process is ongoing */
+ HAL_SPI_STATE_BUSY_TX = 0x03U, /*!< Data Transmission process is ongoing */
+ HAL_SPI_STATE_BUSY_RX = 0x04U, /*!< Data Reception process is ongoing */
+ HAL_SPI_STATE_BUSY_TX_RX = 0x05U, /*!< Data Transmission and Reception process is ongoing */
+ HAL_SPI_STATE_ERROR = 0x06U, /*!< SPI error state */
+ HAL_SPI_STATE_ABORT = 0x07U /*!< SPI abort is ongoing */
+} HAL_SPI_StateTypeDef;
+
+/**
+ * @brief SPI handle Structure definition
+ */
+typedef struct __SPI_HandleTypeDef
+{
+ SPI_TypeDef *Instance; /*!< SPI registers base address */
+
+ SPI_InitTypeDef Init; /*!< SPI communication parameters */
+
+ uint8_t *pTxBuffPtr; /*!< Pointer to SPI Tx transfer Buffer */
+
+ uint16_t TxXferSize; /*!< SPI Tx Transfer size */
+
+ __IO uint16_t TxXferCount; /*!< SPI Tx Transfer Counter */
+
+ uint8_t *pRxBuffPtr; /*!< Pointer to SPI Rx transfer Buffer */
+
+ uint16_t RxXferSize; /*!< SPI Rx Transfer size */
+
+ __IO uint16_t RxXferCount; /*!< SPI Rx Transfer Counter */
+
+ uint32_t CRCSize; /*!< SPI CRC size used for the transfer */
+
+ void (*RxISR)(struct __SPI_HandleTypeDef *hspi); /*!< function pointer on Rx ISR */
+
+ void (*TxISR)(struct __SPI_HandleTypeDef *hspi); /*!< function pointer on Tx ISR */
+
+ DMA_HandleTypeDef *hdmatx; /*!< SPI Tx DMA Handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /*!< SPI Rx DMA Handle parameters */
+
+ HAL_LockTypeDef Lock; /*!< Locking object */
+
+ __IO HAL_SPI_StateTypeDef State; /*!< SPI communication state */
+
+ __IO uint32_t ErrorCode; /*!< SPI Error code */
+
+#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
+ void (* TxCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Tx Completed callback */
+ void (* RxCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Rx Completed callback */
+ void (* TxRxCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI TxRx Completed callback */
+ void (* TxHalfCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Tx Half Completed callback */
+ void (* RxHalfCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Rx Half Completed callback */
+ void (* TxRxHalfCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI TxRx Half Completed callback */
+ void (* ErrorCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Error callback */
+ void (* AbortCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Abort callback */
+ void (* MspInitCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Msp Init callback */
+ void (* MspDeInitCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Msp DeInit callback */
+
+#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
+} SPI_HandleTypeDef;
+
+#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
+/**
+ * @brief HAL SPI Callback ID enumeration definition
+ */
+typedef enum
+{
+ HAL_SPI_TX_COMPLETE_CB_ID = 0x00U, /*!< SPI Tx Completed callback ID */
+ HAL_SPI_RX_COMPLETE_CB_ID = 0x01U, /*!< SPI Rx Completed callback ID */
+ HAL_SPI_TX_RX_COMPLETE_CB_ID = 0x02U, /*!< SPI TxRx Completed callback ID */
+ HAL_SPI_TX_HALF_COMPLETE_CB_ID = 0x03U, /*!< SPI Tx Half Completed callback ID */
+ HAL_SPI_RX_HALF_COMPLETE_CB_ID = 0x04U, /*!< SPI Rx Half Completed callback ID */
+ HAL_SPI_TX_RX_HALF_COMPLETE_CB_ID = 0x05U, /*!< SPI TxRx Half Completed callback ID */
+ HAL_SPI_ERROR_CB_ID = 0x06U, /*!< SPI Error callback ID */
+ HAL_SPI_ABORT_CB_ID = 0x07U, /*!< SPI Abort callback ID */
+ HAL_SPI_MSPINIT_CB_ID = 0x08U, /*!< SPI Msp Init callback ID */
+ HAL_SPI_MSPDEINIT_CB_ID = 0x09U /*!< SPI Msp DeInit callback ID */
+
+} HAL_SPI_CallbackIDTypeDef;
+
+/**
+ * @brief HAL SPI Callback pointer definition
+ */
+typedef void (*pSPI_CallbackTypeDef)(SPI_HandleTypeDef *hspi); /*!< pointer to an SPI callback function */
+
+#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup SPI_Exported_Constants SPI Exported Constants
+ * @{
+ */
+
+/** @defgroup SPI_Error_Code SPI Error Code
+ * @{
+ */
+#define HAL_SPI_ERROR_NONE (0x00000000U) /*!< No error */
+#define HAL_SPI_ERROR_MODF (0x00000001U) /*!< MODF error */
+#define HAL_SPI_ERROR_CRC (0x00000002U) /*!< CRC error */
+#define HAL_SPI_ERROR_OVR (0x00000004U) /*!< OVR error */
+#define HAL_SPI_ERROR_FRE (0x00000008U) /*!< FRE error */
+#define HAL_SPI_ERROR_DMA (0x00000010U) /*!< DMA transfer error */
+#define HAL_SPI_ERROR_FLAG (0x00000020U) /*!< Error on RXNE/TXE/BSY/FTLVL/FRLVL Flag */
+#define HAL_SPI_ERROR_ABORT (0x00000040U) /*!< Error during SPI Abort procedure */
+#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
+#define HAL_SPI_ERROR_INVALID_CALLBACK (0x00000080U) /*!< Invalid Callback error */
+#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Mode SPI Mode
+ * @{
+ */
+#define SPI_MODE_SLAVE (0x00000000U)
+#define SPI_MODE_MASTER (SPI_CR1_MSTR | SPI_CR1_SSI)
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Direction SPI Direction Mode
+ * @{
+ */
+#define SPI_DIRECTION_2LINES (0x00000000U)
+#define SPI_DIRECTION_2LINES_RXONLY SPI_CR1_RXONLY
+#define SPI_DIRECTION_1LINE SPI_CR1_BIDIMODE
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Data_Size SPI Data Size
+ * @{
+ */
+#define SPI_DATASIZE_4BIT (0x00000300U)
+#define SPI_DATASIZE_5BIT (0x00000400U)
+#define SPI_DATASIZE_6BIT (0x00000500U)
+#define SPI_DATASIZE_7BIT (0x00000600U)
+#define SPI_DATASIZE_8BIT (0x00000700U)
+#define SPI_DATASIZE_9BIT (0x00000800U)
+#define SPI_DATASIZE_10BIT (0x00000900U)
+#define SPI_DATASIZE_11BIT (0x00000A00U)
+#define SPI_DATASIZE_12BIT (0x00000B00U)
+#define SPI_DATASIZE_13BIT (0x00000C00U)
+#define SPI_DATASIZE_14BIT (0x00000D00U)
+#define SPI_DATASIZE_15BIT (0x00000E00U)
+#define SPI_DATASIZE_16BIT (0x00000F00U)
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Clock_Polarity SPI Clock Polarity
+ * @{
+ */
+#define SPI_POLARITY_LOW (0x00000000U)
+#define SPI_POLARITY_HIGH SPI_CR1_CPOL
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Clock_Phase SPI Clock Phase
+ * @{
+ */
+#define SPI_PHASE_1EDGE (0x00000000U)
+#define SPI_PHASE_2EDGE SPI_CR1_CPHA
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Slave_Select_management SPI Slave Select Management
+ * @{
+ */
+#define SPI_NSS_SOFT SPI_CR1_SSM
+#define SPI_NSS_HARD_INPUT (0x00000000U)
+#define SPI_NSS_HARD_OUTPUT (SPI_CR2_SSOE << 16U)
+/**
+ * @}
+ */
+
+/** @defgroup SPI_NSSP_Mode SPI NSS Pulse Mode
+ * @{
+ */
+#define SPI_NSS_PULSE_ENABLE SPI_CR2_NSSP
+#define SPI_NSS_PULSE_DISABLE (0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup SPI_BaudRate_Prescaler SPI BaudRate Prescaler
+ * @{
+ */
+#define SPI_BAUDRATEPRESCALER_2 (0x00000000U)
+#define SPI_BAUDRATEPRESCALER_4 (SPI_CR1_BR_0)
+#define SPI_BAUDRATEPRESCALER_8 (SPI_CR1_BR_1)
+#define SPI_BAUDRATEPRESCALER_16 (SPI_CR1_BR_1 | SPI_CR1_BR_0)
+#define SPI_BAUDRATEPRESCALER_32 (SPI_CR1_BR_2)
+#define SPI_BAUDRATEPRESCALER_64 (SPI_CR1_BR_2 | SPI_CR1_BR_0)
+#define SPI_BAUDRATEPRESCALER_128 (SPI_CR1_BR_2 | SPI_CR1_BR_1)
+#define SPI_BAUDRATEPRESCALER_256 (SPI_CR1_BR_2 | SPI_CR1_BR_1 | SPI_CR1_BR_0)
+/**
+ * @}
+ */
+
+/** @defgroup SPI_MSB_LSB_transmission SPI MSB LSB Transmission
+ * @{
+ */
+#define SPI_FIRSTBIT_MSB (0x00000000U)
+#define SPI_FIRSTBIT_LSB SPI_CR1_LSBFIRST
+/**
+ * @}
+ */
+
+/** @defgroup SPI_TI_mode SPI TI Mode
+ * @{
+ */
+#define SPI_TIMODE_DISABLE (0x00000000U)
+#define SPI_TIMODE_ENABLE SPI_CR2_FRF
+/**
+ * @}
+ */
+
+/** @defgroup SPI_CRC_Calculation SPI CRC Calculation
+ * @{
+ */
+#define SPI_CRCCALCULATION_DISABLE (0x00000000U)
+#define SPI_CRCCALCULATION_ENABLE SPI_CR1_CRCEN
+/**
+ * @}
+ */
+
+/** @defgroup SPI_CRC_length SPI CRC Length
+ * @{
+ * This parameter can be one of the following values:
+ * SPI_CRC_LENGTH_DATASIZE: aligned with the data size
+ * SPI_CRC_LENGTH_8BIT : CRC 8bit
+ * SPI_CRC_LENGTH_16BIT : CRC 16bit
+ */
+#define SPI_CRC_LENGTH_DATASIZE (0x00000000U)
+#define SPI_CRC_LENGTH_8BIT (0x00000001U)
+#define SPI_CRC_LENGTH_16BIT (0x00000002U)
+/**
+ * @}
+ */
+
+/** @defgroup SPI_FIFO_reception_threshold SPI FIFO Reception Threshold
+ * @{
+ * This parameter can be one of the following values:
+ * SPI_RXFIFO_THRESHOLD or SPI_RXFIFO_THRESHOLD_QF :
+ * RXNE event is generated if the FIFO
+ * level is greater or equal to 1/4(8-bits).
+ * SPI_RXFIFO_THRESHOLD_HF: RXNE event is generated if the FIFO
+ * level is greater or equal to 1/2(16 bits). */
+#define SPI_RXFIFO_THRESHOLD SPI_CR2_FRXTH
+#define SPI_RXFIFO_THRESHOLD_QF SPI_CR2_FRXTH
+#define SPI_RXFIFO_THRESHOLD_HF (0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Interrupt_definition SPI Interrupt Definition
+ * @{
+ */
+#define SPI_IT_TXE SPI_CR2_TXEIE
+#define SPI_IT_RXNE SPI_CR2_RXNEIE
+#define SPI_IT_ERR SPI_CR2_ERRIE
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Flags_definition SPI Flags Definition
+ * @{
+ */
+#define SPI_FLAG_RXNE SPI_SR_RXNE /* SPI status flag: Rx buffer not empty flag */
+#define SPI_FLAG_TXE SPI_SR_TXE /* SPI status flag: Tx buffer empty flag */
+#define SPI_FLAG_BSY SPI_SR_BSY /* SPI status flag: Busy flag */
+#define SPI_FLAG_CRCERR SPI_SR_CRCERR /* SPI Error flag: CRC error flag */
+#define SPI_FLAG_MODF SPI_SR_MODF /* SPI Error flag: Mode fault flag */
+#define SPI_FLAG_OVR SPI_SR_OVR /* SPI Error flag: Overrun flag */
+#define SPI_FLAG_FRE SPI_SR_FRE /* SPI Error flag: TI mode frame format error flag */
+#define SPI_FLAG_FTLVL SPI_SR_FTLVL /* SPI fifo transmission level */
+#define SPI_FLAG_FRLVL SPI_SR_FRLVL /* SPI fifo reception level */
+#define SPI_FLAG_MASK (SPI_SR_RXNE | SPI_SR_TXE | SPI_SR_BSY | SPI_SR_CRCERR\
+ | SPI_SR_MODF | SPI_SR_OVR | SPI_SR_FRE | SPI_SR_FTLVL | SPI_SR_FRLVL)
+/**
+ * @}
+ */
+
+/** @defgroup SPI_transmission_fifo_status_level SPI Transmission FIFO Status Level
+ * @{
+ */
+#define SPI_FTLVL_EMPTY (0x00000000U)
+#define SPI_FTLVL_QUARTER_FULL (0x00000800U)
+#define SPI_FTLVL_HALF_FULL (0x00001000U)
+#define SPI_FTLVL_FULL (0x00001800U)
+
+/**
+ * @}
+ */
+
+/** @defgroup SPI_reception_fifo_status_level SPI Reception FIFO Status Level
+ * @{
+ */
+#define SPI_FRLVL_EMPTY (0x00000000U)
+#define SPI_FRLVL_QUARTER_FULL (0x00000200U)
+#define SPI_FRLVL_HALF_FULL (0x00000400U)
+#define SPI_FRLVL_FULL (0x00000600U)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup SPI_Exported_Macros SPI Exported Macros
+ * @{
+ */
+
+/** @brief Reset SPI handle state.
+ * @param __HANDLE__ specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
+#define __HAL_SPI_RESET_HANDLE_STATE(__HANDLE__) do{ \
+ (__HANDLE__)->State = HAL_SPI_STATE_RESET; \
+ (__HANDLE__)->MspInitCallback = NULL; \
+ (__HANDLE__)->MspDeInitCallback = NULL; \
+ } while(0)
+#else
+#define __HAL_SPI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SPI_STATE_RESET)
+#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
+
+/** @brief Enable the specified SPI interrupts.
+ * @param __HANDLE__ specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @param __INTERRUPT__ specifies the interrupt source to enable.
+ * This parameter can be one of the following values:
+ * @arg SPI_IT_TXE: Tx buffer empty interrupt enable
+ * @arg SPI_IT_RXNE: RX buffer not empty interrupt enable
+ * @arg SPI_IT_ERR: Error interrupt enable
+ * @retval None
+ */
+#define __HAL_SPI_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT((__HANDLE__)->Instance->CR2, (__INTERRUPT__))
+
+/** @brief Disable the specified SPI interrupts.
+ * @param __HANDLE__ specifies the SPI handle.
+ * This parameter can be SPIx where x: 1, 2, or 3 to select the SPI peripheral.
+ * @param __INTERRUPT__ specifies the interrupt source to disable.
+ * This parameter can be one of the following values:
+ * @arg SPI_IT_TXE: Tx buffer empty interrupt enable
+ * @arg SPI_IT_RXNE: RX buffer not empty interrupt enable
+ * @arg SPI_IT_ERR: Error interrupt enable
+ * @retval None
+ */
+#define __HAL_SPI_DISABLE_IT(__HANDLE__, __INTERRUPT__) CLEAR_BIT((__HANDLE__)->Instance->CR2, (__INTERRUPT__))
+
+/** @brief Check whether the specified SPI interrupt source is enabled or not.
+ * @param __HANDLE__ specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @param __INTERRUPT__ specifies the SPI interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg SPI_IT_TXE: Tx buffer empty interrupt enable
+ * @arg SPI_IT_RXNE: RX buffer not empty interrupt enable
+ * @arg SPI_IT_ERR: Error interrupt enable
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_SPI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2\
+ & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief Check whether the specified SPI flag is set or not.
+ * @param __HANDLE__ specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @param __FLAG__ specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg SPI_FLAG_RXNE: Receive buffer not empty flag
+ * @arg SPI_FLAG_TXE: Transmit buffer empty flag
+ * @arg SPI_FLAG_CRCERR: CRC error flag
+ * @arg SPI_FLAG_MODF: Mode fault flag
+ * @arg SPI_FLAG_OVR: Overrun flag
+ * @arg SPI_FLAG_BSY: Busy flag
+ * @arg SPI_FLAG_FRE: Frame format error flag
+ * @arg SPI_FLAG_FTLVL: SPI fifo transmission level
+ * @arg SPI_FLAG_FRLVL: SPI fifo reception level
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_SPI_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clear the SPI CRCERR pending flag.
+ * @param __HANDLE__ specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define __HAL_SPI_CLEAR_CRCERRFLAG(__HANDLE__) ((__HANDLE__)->Instance->SR = (uint16_t)(~SPI_FLAG_CRCERR))
+
+/** @brief Clear the SPI MODF pending flag.
+ * @param __HANDLE__ specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define __HAL_SPI_CLEAR_MODFFLAG(__HANDLE__) \
+ do{ \
+ __IO uint32_t tmpreg_modf = 0x00U; \
+ tmpreg_modf = (__HANDLE__)->Instance->SR; \
+ CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_SPE); \
+ UNUSED(tmpreg_modf); \
+ } while(0U)
+
+/** @brief Clear the SPI OVR pending flag.
+ * @param __HANDLE__ specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define __HAL_SPI_CLEAR_OVRFLAG(__HANDLE__) \
+ do{ \
+ __IO uint32_t tmpreg_ovr = 0x00U; \
+ tmpreg_ovr = (__HANDLE__)->Instance->DR; \
+ tmpreg_ovr = (__HANDLE__)->Instance->SR; \
+ UNUSED(tmpreg_ovr); \
+ } while(0U)
+
+/** @brief Clear the SPI FRE pending flag.
+ * @param __HANDLE__ specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define __HAL_SPI_CLEAR_FREFLAG(__HANDLE__) \
+ do{ \
+ __IO uint32_t tmpreg_fre = 0x00U; \
+ tmpreg_fre = (__HANDLE__)->Instance->SR; \
+ UNUSED(tmpreg_fre); \
+ }while(0U)
+
+/** @brief Enable the SPI peripheral.
+ * @param __HANDLE__ specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define __HAL_SPI_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_SPE)
+
+/** @brief Disable the SPI peripheral.
+ * @param __HANDLE__ specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define __HAL_SPI_DISABLE(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_SPE)
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup SPI_Private_Macros SPI Private Macros
+ * @{
+ */
+
+/** @brief Set the SPI transmit-only mode.
+ * @param __HANDLE__ specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define SPI_1LINE_TX(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_BIDIOE)
+
+/** @brief Set the SPI receive-only mode.
+ * @param __HANDLE__ specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define SPI_1LINE_RX(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_BIDIOE)
+
+/** @brief Reset the CRC calculation of the SPI.
+ * @param __HANDLE__ specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define SPI_RESET_CRC(__HANDLE__) do{CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_CRCEN);\
+ SET_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_CRCEN);}while(0U)
+
+/** @brief Check whether the specified SPI flag is set or not.
+ * @param __SR__ copy of SPI SR regsiter.
+ * @param __FLAG__ specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg SPI_FLAG_RXNE: Receive buffer not empty flag
+ * @arg SPI_FLAG_TXE: Transmit buffer empty flag
+ * @arg SPI_FLAG_CRCERR: CRC error flag
+ * @arg SPI_FLAG_MODF: Mode fault flag
+ * @arg SPI_FLAG_OVR: Overrun flag
+ * @arg SPI_FLAG_BSY: Busy flag
+ * @arg SPI_FLAG_FRE: Frame format error flag
+ * @arg SPI_FLAG_FTLVL: SPI fifo transmission level
+ * @arg SPI_FLAG_FRLVL: SPI fifo reception level
+ * @retval SET or RESET.
+ */
+#define SPI_CHECK_FLAG(__SR__, __FLAG__) ((((__SR__) & ((__FLAG__) & SPI_FLAG_MASK)) == ((__FLAG__) & SPI_FLAG_MASK)) ? SET : RESET)
+
+/** @brief Check whether the specified SPI Interrupt is set or not.
+ * @param __CR2__ copy of SPI CR2 regsiter.
+ * @param __INTERRUPT__ specifies the SPI interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg SPI_IT_TXE: Tx buffer empty interrupt enable
+ * @arg SPI_IT_RXNE: RX buffer not empty interrupt enable
+ * @arg SPI_IT_ERR: Error interrupt enable
+ * @retval SET or RESET.
+ */
+#define SPI_CHECK_IT_SOURCE(__CR2__, __INTERRUPT__) ((((__CR2__) & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief Checks if SPI Mode parameter is in allowed range.
+ * @param __MODE__ specifies the SPI Mode.
+ * This parameter can be a value of @ref SPI_Mode
+ * @retval None
+ */
+#define IS_SPI_MODE(__MODE__) (((__MODE__) == SPI_MODE_SLAVE) || \
+ ((__MODE__) == SPI_MODE_MASTER))
+
+/** @brief Checks if SPI Direction Mode parameter is in allowed range.
+ * @param __MODE__ specifies the SPI Direction Mode.
+ * This parameter can be a value of @ref SPI_Direction
+ * @retval None
+ */
+#define IS_SPI_DIRECTION(__MODE__) (((__MODE__) == SPI_DIRECTION_2LINES) || \
+ ((__MODE__) == SPI_DIRECTION_2LINES_RXONLY) || \
+ ((__MODE__) == SPI_DIRECTION_1LINE))
+
+/** @brief Checks if SPI Direction Mode parameter is 2 lines.
+ * @param __MODE__ specifies the SPI Direction Mode.
+ * @retval None
+ */
+#define IS_SPI_DIRECTION_2LINES(__MODE__) ((__MODE__) == SPI_DIRECTION_2LINES)
+
+/** @brief Checks if SPI Direction Mode parameter is 1 or 2 lines.
+ * @param __MODE__ specifies the SPI Direction Mode.
+ * @retval None
+ */
+#define IS_SPI_DIRECTION_2LINES_OR_1LINE(__MODE__) (((__MODE__) == SPI_DIRECTION_2LINES) || \
+ ((__MODE__) == SPI_DIRECTION_1LINE))
+
+/** @brief Checks if SPI Data Size parameter is in allowed range.
+ * @param __DATASIZE__ specifies the SPI Data Size.
+ * This parameter can be a value of @ref SPI_Data_Size
+ * @retval None
+ */
+#define IS_SPI_DATASIZE(__DATASIZE__) (((__DATASIZE__) == SPI_DATASIZE_16BIT) || \
+ ((__DATASIZE__) == SPI_DATASIZE_15BIT) || \
+ ((__DATASIZE__) == SPI_DATASIZE_14BIT) || \
+ ((__DATASIZE__) == SPI_DATASIZE_13BIT) || \
+ ((__DATASIZE__) == SPI_DATASIZE_12BIT) || \
+ ((__DATASIZE__) == SPI_DATASIZE_11BIT) || \
+ ((__DATASIZE__) == SPI_DATASIZE_10BIT) || \
+ ((__DATASIZE__) == SPI_DATASIZE_9BIT) || \
+ ((__DATASIZE__) == SPI_DATASIZE_8BIT) || \
+ ((__DATASIZE__) == SPI_DATASIZE_7BIT) || \
+ ((__DATASIZE__) == SPI_DATASIZE_6BIT) || \
+ ((__DATASIZE__) == SPI_DATASIZE_5BIT) || \
+ ((__DATASIZE__) == SPI_DATASIZE_4BIT))
+
+/** @brief Checks if SPI Serial clock steady state parameter is in allowed range.
+ * @param __CPOL__ specifies the SPI serial clock steady state.
+ * This parameter can be a value of @ref SPI_Clock_Polarity
+ * @retval None
+ */
+#define IS_SPI_CPOL(__CPOL__) (((__CPOL__) == SPI_POLARITY_LOW) || \
+ ((__CPOL__) == SPI_POLARITY_HIGH))
+
+/** @brief Checks if SPI Clock Phase parameter is in allowed range.
+ * @param __CPHA__ specifies the SPI Clock Phase.
+ * This parameter can be a value of @ref SPI_Clock_Phase
+ * @retval None
+ */
+#define IS_SPI_CPHA(__CPHA__) (((__CPHA__) == SPI_PHASE_1EDGE) || \
+ ((__CPHA__) == SPI_PHASE_2EDGE))
+
+/** @brief Checks if SPI Slave Select parameter is in allowed range.
+ * @param __NSS__ specifies the SPI Slave Select management parameter.
+ * This parameter can be a value of @ref SPI_Slave_Select_management
+ * @retval None
+ */
+#define IS_SPI_NSS(__NSS__) (((__NSS__) == SPI_NSS_SOFT) || \
+ ((__NSS__) == SPI_NSS_HARD_INPUT) || \
+ ((__NSS__) == SPI_NSS_HARD_OUTPUT))
+
+/** @brief Checks if SPI NSS Pulse parameter is in allowed range.
+ * @param __NSSP__ specifies the SPI NSS Pulse Mode parameter.
+ * This parameter can be a value of @ref SPI_NSSP_Mode
+ * @retval None
+ */
+#define IS_SPI_NSSP(__NSSP__) (((__NSSP__) == SPI_NSS_PULSE_ENABLE) || \
+ ((__NSSP__) == SPI_NSS_PULSE_DISABLE))
+
+/** @brief Checks if SPI Baudrate prescaler parameter is in allowed range.
+ * @param __PRESCALER__ specifies the SPI Baudrate prescaler.
+ * This parameter can be a value of @ref SPI_BaudRate_Prescaler
+ * @retval None
+ */
+#define IS_SPI_BAUDRATE_PRESCALER(__PRESCALER__) (((__PRESCALER__) == SPI_BAUDRATEPRESCALER_2) || \
+ ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_4) || \
+ ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_8) || \
+ ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_16) || \
+ ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_32) || \
+ ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_64) || \
+ ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_128) || \
+ ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_256))
+
+/** @brief Checks if SPI MSB LSB transmission parameter is in allowed range.
+ * @param __BIT__ specifies the SPI MSB LSB transmission (whether data transfer starts from MSB or LSB bit).
+ * This parameter can be a value of @ref SPI_MSB_LSB_transmission
+ * @retval None
+ */
+#define IS_SPI_FIRST_BIT(__BIT__) (((__BIT__) == SPI_FIRSTBIT_MSB) || \
+ ((__BIT__) == SPI_FIRSTBIT_LSB))
+
+/** @brief Checks if SPI TI mode parameter is in allowed range.
+ * @param __MODE__ specifies the SPI TI mode.
+ * This parameter can be a value of @ref SPI_TI_mode
+ * @retval None
+ */
+#define IS_SPI_TIMODE(__MODE__) (((__MODE__) == SPI_TIMODE_DISABLE) || \
+ ((__MODE__) == SPI_TIMODE_ENABLE))
+
+/** @brief Checks if SPI CRC calculation enabled state is in allowed range.
+ * @param __CALCULATION__ specifies the SPI CRC calculation enable state.
+ * This parameter can be a value of @ref SPI_CRC_Calculation
+ * @retval None
+ */
+#define IS_SPI_CRC_CALCULATION(__CALCULATION__) (((__CALCULATION__) == SPI_CRCCALCULATION_DISABLE) || \
+ ((__CALCULATION__) == SPI_CRCCALCULATION_ENABLE))
+
+/** @brief Checks if SPI CRC length is in allowed range.
+ * @param __LENGTH__ specifies the SPI CRC length.
+ * This parameter can be a value of @ref SPI_CRC_length
+ * @retval None
+ */
+#define IS_SPI_CRC_LENGTH(__LENGTH__) (((__LENGTH__) == SPI_CRC_LENGTH_DATASIZE) ||\
+ ((__LENGTH__) == SPI_CRC_LENGTH_8BIT) || \
+ ((__LENGTH__) == SPI_CRC_LENGTH_16BIT))
+
+/** @brief Checks if SPI polynomial value to be used for the CRC calculation, is in allowed range.
+ * @param __POLYNOMIAL__ specifies the SPI polynomial value to be used for the CRC calculation.
+ * This parameter must be a number between Min_Data = 0 and Max_Data = 65535
+ * @retval None
+ */
+#define IS_SPI_CRC_POLYNOMIAL(__POLYNOMIAL__) (((__POLYNOMIAL__) >= 0x1U) && ((__POLYNOMIAL__) <= 0xFFFFU) && (((__POLYNOMIAL__)&0x1U) != 0U))
+
+/** @brief Checks if DMA handle is valid.
+ * @param __HANDLE__ specifies a DMA Handle.
+ * @retval None
+ */
+#define IS_SPI_DMA_HANDLE(__HANDLE__) ((__HANDLE__) != NULL)
+
+/** @brief Checks if a data address is 16bit aligned.
+ * @param __DATA__ specifies a data address.
+ * @retval None
+ */
+#define IS_SPI_16BIT_ALIGNED_ADDRESS(__DATA__) (((uint32_t)(__DATA__) % 2U) == 0U)
+
+/**
+ * @}
+ */
+
+/* Include SPI HAL Extended module */
+#include "stm32f0xx_hal_spi_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup SPI_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup SPI_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization/de-initialization functions ********************************/
+HAL_StatusTypeDef HAL_SPI_Init(SPI_HandleTypeDef *hspi);
+HAL_StatusTypeDef HAL_SPI_DeInit(SPI_HandleTypeDef *hspi);
+void HAL_SPI_MspInit(SPI_HandleTypeDef *hspi);
+void HAL_SPI_MspDeInit(SPI_HandleTypeDef *hspi);
+
+/* Callbacks Register/UnRegister functions ***********************************/
+#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
+HAL_StatusTypeDef HAL_SPI_RegisterCallback(SPI_HandleTypeDef *hspi, HAL_SPI_CallbackIDTypeDef CallbackID, pSPI_CallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_SPI_UnRegisterCallback(SPI_HandleTypeDef *hspi, HAL_SPI_CallbackIDTypeDef CallbackID);
+#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
+/**
+ * @}
+ */
+
+/** @addtogroup SPI_Exported_Functions_Group2
+ * @{
+ */
+/* I/O operation functions ***************************************************/
+HAL_StatusTypeDef HAL_SPI_Transmit(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SPI_Receive(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SPI_TransmitReceive(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size,
+ uint32_t Timeout);
+HAL_StatusTypeDef HAL_SPI_Transmit_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_Receive_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_TransmitReceive_IT(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData,
+ uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_Transmit_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_Receive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_TransmitReceive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData,
+ uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_DMAPause(SPI_HandleTypeDef *hspi);
+HAL_StatusTypeDef HAL_SPI_DMAResume(SPI_HandleTypeDef *hspi);
+HAL_StatusTypeDef HAL_SPI_DMAStop(SPI_HandleTypeDef *hspi);
+/* Transfer Abort functions */
+HAL_StatusTypeDef HAL_SPI_Abort(SPI_HandleTypeDef *hspi);
+HAL_StatusTypeDef HAL_SPI_Abort_IT(SPI_HandleTypeDef *hspi);
+
+void HAL_SPI_IRQHandler(SPI_HandleTypeDef *hspi);
+void HAL_SPI_TxCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_RxCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_TxRxCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_TxHalfCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_RxHalfCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_TxRxHalfCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_ErrorCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_AbortCpltCallback(SPI_HandleTypeDef *hspi);
+/**
+ * @}
+ */
+
+/** @addtogroup SPI_Exported_Functions_Group3
+ * @{
+ */
+/* Peripheral State and Error functions ***************************************/
+HAL_SPI_StateTypeDef HAL_SPI_GetState(SPI_HandleTypeDef *hspi);
+uint32_t HAL_SPI_GetError(SPI_HandleTypeDef *hspi);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32F0xx_HAL_SPI_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_spi_ex.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_spi_ex.h
new file mode 100644
index 0000000..5fbac8f
--- /dev/null
+++ b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_spi_ex.h
@@ -0,0 +1,75 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_spi_ex.h
+ * @author MCD Application Team
+ * @brief Header file of SPI HAL Extended module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32F0xx_HAL_SPI_EX_H
+#define STM32F0xx_HAL_SPI_EX_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup SPIEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported macros -----------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup SPIEx_Exported_Functions
+ * @{
+ */
+
+/* Initialization and de-initialization functions ****************************/
+/* IO operation functions *****************************************************/
+/** @addtogroup SPIEx_Exported_Functions_Group1
+ * @{
+ */
+HAL_StatusTypeDef HAL_SPIEx_FlushRxFifo(SPI_HandleTypeDef *hspi);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32F0xx_HAL_SPI_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_tim.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_tim.h
new file mode 100644
index 0000000..69cc007
--- /dev/null
+++ b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_tim.h
@@ -0,0 +1,2040 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_tim.h
+ * @author MCD Application Team
+ * @brief Header file of TIM HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32F0xx_HAL_TIM_H
+#define STM32F0xx_HAL_TIM_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup TIM
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup TIM_Exported_Types TIM Exported Types
+ * @{
+ */
+
+/**
+ * @brief TIM Time base Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t Prescaler; /*!< Specifies the prescaler value used to divide the TIM clock.
+ This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+
+ uint32_t CounterMode; /*!< Specifies the counter mode.
+ This parameter can be a value of @ref TIM_Counter_Mode */
+
+ uint32_t Period; /*!< Specifies the period value to be loaded into the active
+ Auto-Reload Register at the next update event.
+ This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
+
+ uint32_t ClockDivision; /*!< Specifies the clock division.
+ This parameter can be a value of @ref TIM_ClockDivision */
+
+ uint32_t RepetitionCounter; /*!< Specifies the repetition counter value. Each time the RCR downcounter
+ reaches zero, an update event is generated and counting restarts
+ from the RCR value (N).
+ This means in PWM mode that (N+1) corresponds to:
+ - the number of PWM periods in edge-aligned mode
+ - the number of half PWM period in center-aligned mode
+ GP timers: this parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF.
+ Advanced timers: this parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
+
+ uint32_t AutoReloadPreload; /*!< Specifies the auto-reload preload.
+ This parameter can be a value of @ref TIM_AutoReloadPreload */
+} TIM_Base_InitTypeDef;
+
+/**
+ * @brief TIM Output Compare Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t OCMode; /*!< Specifies the TIM mode.
+ This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */
+
+ uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
+ This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+
+ uint32_t OCPolarity; /*!< Specifies the output polarity.
+ This parameter can be a value of @ref TIM_Output_Compare_Polarity */
+
+ uint32_t OCNPolarity; /*!< Specifies the complementary output polarity.
+ This parameter can be a value of @ref TIM_Output_Compare_N_Polarity
+ @note This parameter is valid only for timer instances supporting break feature. */
+
+ uint32_t OCFastMode; /*!< Specifies the Fast mode state.
+ This parameter can be a value of @ref TIM_Output_Fast_State
+ @note This parameter is valid only in PWM1 and PWM2 mode. */
+
+
+ uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
+ This parameter can be a value of @ref TIM_Output_Compare_Idle_State
+ @note This parameter is valid only for timer instances supporting break feature. */
+
+ uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
+ This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State
+ @note This parameter is valid only for timer instances supporting break feature. */
+} TIM_OC_InitTypeDef;
+
+/**
+ * @brief TIM One Pulse Mode Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t OCMode; /*!< Specifies the TIM mode.
+ This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */
+
+ uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
+ This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+
+ uint32_t OCPolarity; /*!< Specifies the output polarity.
+ This parameter can be a value of @ref TIM_Output_Compare_Polarity */
+
+ uint32_t OCNPolarity; /*!< Specifies the complementary output polarity.
+ This parameter can be a value of @ref TIM_Output_Compare_N_Polarity
+ @note This parameter is valid only for timer instances supporting break feature. */
+
+ uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
+ This parameter can be a value of @ref TIM_Output_Compare_Idle_State
+ @note This parameter is valid only for timer instances supporting break feature. */
+
+ uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
+ This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State
+ @note This parameter is valid only for timer instances supporting break feature. */
+
+ uint32_t ICPolarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+ uint32_t ICSelection; /*!< Specifies the input.
+ This parameter can be a value of @ref TIM_Input_Capture_Selection */
+
+ uint32_t ICFilter; /*!< Specifies the input capture filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+} TIM_OnePulse_InitTypeDef;
+
+/**
+ * @brief TIM Input Capture Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t ICPolarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+ uint32_t ICSelection; /*!< Specifies the input.
+ This parameter can be a value of @ref TIM_Input_Capture_Selection */
+
+ uint32_t ICPrescaler; /*!< Specifies the Input Capture Prescaler.
+ This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+ uint32_t ICFilter; /*!< Specifies the input capture filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+} TIM_IC_InitTypeDef;
+
+/**
+ * @brief TIM Encoder Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t EncoderMode; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Encoder_Mode */
+
+ uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Encoder_Input_Polarity */
+
+ uint32_t IC1Selection; /*!< Specifies the input.
+ This parameter can be a value of @ref TIM_Input_Capture_Selection */
+
+ uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler.
+ This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+ uint32_t IC1Filter; /*!< Specifies the input capture filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+
+ uint32_t IC2Polarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Encoder_Input_Polarity */
+
+ uint32_t IC2Selection; /*!< Specifies the input.
+ This parameter can be a value of @ref TIM_Input_Capture_Selection */
+
+ uint32_t IC2Prescaler; /*!< Specifies the Input Capture Prescaler.
+ This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+ uint32_t IC2Filter; /*!< Specifies the input capture filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+} TIM_Encoder_InitTypeDef;
+
+/**
+ * @brief Clock Configuration Handle Structure definition
+ */
+typedef struct
+{
+ uint32_t ClockSource; /*!< TIM clock sources
+ This parameter can be a value of @ref TIM_Clock_Source */
+ uint32_t ClockPolarity; /*!< TIM clock polarity
+ This parameter can be a value of @ref TIM_Clock_Polarity */
+ uint32_t ClockPrescaler; /*!< TIM clock prescaler
+ This parameter can be a value of @ref TIM_Clock_Prescaler */
+ uint32_t ClockFilter; /*!< TIM clock filter
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+} TIM_ClockConfigTypeDef;
+
+/**
+ * @brief TIM Clear Input Configuration Handle Structure definition
+ */
+typedef struct
+{
+ uint32_t ClearInputState; /*!< TIM clear Input state
+ This parameter can be ENABLE or DISABLE */
+ uint32_t ClearInputSource; /*!< TIM clear Input sources
+ This parameter can be a value of @ref TIM_ClearInput_Source */
+ uint32_t ClearInputPolarity; /*!< TIM Clear Input polarity
+ This parameter can be a value of @ref TIM_ClearInput_Polarity */
+ uint32_t ClearInputPrescaler; /*!< TIM Clear Input prescaler
+ This parameter must be 0: When OCRef clear feature is used with ETR source, ETR prescaler must be off */
+ uint32_t ClearInputFilter; /*!< TIM Clear Input filter
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+} TIM_ClearInputConfigTypeDef;
+
+/**
+ * @brief TIM Master configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t MasterOutputTrigger; /*!< Trigger output (TRGO) selection
+ This parameter can be a value of @ref TIM_Master_Mode_Selection */
+ uint32_t MasterSlaveMode; /*!< Master/slave mode selection
+ This parameter can be a value of @ref TIM_Master_Slave_Mode
+ @note When the Master/slave mode is enabled, the effect of
+ an event on the trigger input (TRGI) is delayed to allow a
+ perfect synchronization between the current timer and its
+ slaves (through TRGO). It is not mandatory in case of timer
+ synchronization mode. */
+} TIM_MasterConfigTypeDef;
+
+/**
+ * @brief TIM Slave configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t SlaveMode; /*!< Slave mode selection
+ This parameter can be a value of @ref TIM_Slave_Mode */
+ uint32_t InputTrigger; /*!< Input Trigger source
+ This parameter can be a value of @ref TIM_Trigger_Selection */
+ uint32_t TriggerPolarity; /*!< Input Trigger polarity
+ This parameter can be a value of @ref TIM_Trigger_Polarity */
+ uint32_t TriggerPrescaler; /*!< Input trigger prescaler
+ This parameter can be a value of @ref TIM_Trigger_Prescaler */
+ uint32_t TriggerFilter; /*!< Input trigger filter
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+
+} TIM_SlaveConfigTypeDef;
+
+/**
+ * @brief TIM Break input(s) and Dead time configuration Structure definition
+ * @note 2 break inputs can be configured (BKIN and BKIN2) with configurable
+ * filter and polarity.
+ */
+typedef struct
+{
+ uint32_t OffStateRunMode; /*!< TIM off state in run mode
+ This parameter can be a value of @ref TIM_OSSR_Off_State_Selection_for_Run_mode_state */
+ uint32_t OffStateIDLEMode; /*!< TIM off state in IDLE mode
+ This parameter can be a value of @ref TIM_OSSI_Off_State_Selection_for_Idle_mode_state */
+ uint32_t LockLevel; /*!< TIM Lock level
+ This parameter can be a value of @ref TIM_Lock_level */
+ uint32_t DeadTime; /*!< TIM dead Time
+ This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF */
+ uint32_t BreakState; /*!< TIM Break State
+ This parameter can be a value of @ref TIM_Break_Input_enable_disable */
+ uint32_t BreakPolarity; /*!< TIM Break input polarity
+ This parameter can be a value of @ref TIM_Break_Polarity */
+ uint32_t BreakFilter; /*!< Specifies the break input filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+ uint32_t AutomaticOutput; /*!< TIM Automatic Output Enable state
+ This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */
+} TIM_BreakDeadTimeConfigTypeDef;
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_TIM_STATE_RESET = 0x00U, /*!< Peripheral not yet initialized or disabled */
+ HAL_TIM_STATE_READY = 0x01U, /*!< Peripheral Initialized and ready for use */
+ HAL_TIM_STATE_BUSY = 0x02U, /*!< An internal process is ongoing */
+ HAL_TIM_STATE_TIMEOUT = 0x03U, /*!< Timeout state */
+ HAL_TIM_STATE_ERROR = 0x04U /*!< Reception process is ongoing */
+} HAL_TIM_StateTypeDef;
+
+/**
+ * @brief HAL Active channel structures definition
+ */
+typedef enum
+{
+ HAL_TIM_ACTIVE_CHANNEL_1 = 0x01U, /*!< The active channel is 1 */
+ HAL_TIM_ACTIVE_CHANNEL_2 = 0x02U, /*!< The active channel is 2 */
+ HAL_TIM_ACTIVE_CHANNEL_3 = 0x04U, /*!< The active channel is 3 */
+ HAL_TIM_ACTIVE_CHANNEL_4 = 0x08U, /*!< The active channel is 4 */
+ HAL_TIM_ACTIVE_CHANNEL_CLEARED = 0x00U /*!< All active channels cleared */
+} HAL_TIM_ActiveChannel;
+
+/**
+ * @brief TIM Time Base Handle Structure definition
+ */
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+typedef struct __TIM_HandleTypeDef
+#else
+typedef struct
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+{
+ TIM_TypeDef *Instance; /*!< Register base address */
+ TIM_Base_InitTypeDef Init; /*!< TIM Time Base required parameters */
+ HAL_TIM_ActiveChannel Channel; /*!< Active channel */
+ DMA_HandleTypeDef *hdma[7]; /*!< DMA Handlers array
+ This array is accessed by a @ref DMA_Handle_index */
+ HAL_LockTypeDef Lock; /*!< Locking object */
+ __IO HAL_TIM_StateTypeDef State; /*!< TIM operation state */
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ void (* Base_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Base Msp Init Callback */
+ void (* Base_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Base Msp DeInit Callback */
+ void (* IC_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM IC Msp Init Callback */
+ void (* IC_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM IC Msp DeInit Callback */
+ void (* OC_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM OC Msp Init Callback */
+ void (* OC_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM OC Msp DeInit Callback */
+ void (* PWM_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Msp Init Callback */
+ void (* PWM_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Msp DeInit Callback */
+ void (* OnePulse_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM One Pulse Msp Init Callback */
+ void (* OnePulse_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM One Pulse Msp DeInit Callback */
+ void (* Encoder_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Encoder Msp Init Callback */
+ void (* Encoder_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Encoder Msp DeInit Callback */
+ void (* HallSensor_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Hall Sensor Msp Init Callback */
+ void (* HallSensor_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Hall Sensor Msp DeInit Callback */
+ void (* PeriodElapsedCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Period Elapsed Callback */
+ void (* PeriodElapsedHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Period Elapsed half complete Callback */
+ void (* TriggerCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Trigger Callback */
+ void (* TriggerHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Trigger half complete Callback */
+ void (* IC_CaptureCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Input Capture Callback */
+ void (* IC_CaptureHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Input Capture half complete Callback */
+ void (* OC_DelayElapsedCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Output Compare Delay Elapsed Callback */
+ void (* PWM_PulseFinishedCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Pulse Finished Callback */
+ void (* PWM_PulseFinishedHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Pulse Finished half complete Callback */
+ void (* ErrorCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Error Callback */
+ void (* CommutationCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Commutation Callback */
+ void (* CommutationHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Commutation half complete Callback */
+ void (* BreakCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Break Callback */
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+} TIM_HandleTypeDef;
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+/**
+ * @brief HAL TIM Callback ID enumeration definition
+ */
+typedef enum
+{
+ HAL_TIM_BASE_MSPINIT_CB_ID = 0x00U /*!< TIM Base MspInit Callback ID */
+ ,HAL_TIM_BASE_MSPDEINIT_CB_ID = 0x01U /*!< TIM Base MspDeInit Callback ID */
+ ,HAL_TIM_IC_MSPINIT_CB_ID = 0x02U /*!< TIM IC MspInit Callback ID */
+ ,HAL_TIM_IC_MSPDEINIT_CB_ID = 0x03U /*!< TIM IC MspDeInit Callback ID */
+ ,HAL_TIM_OC_MSPINIT_CB_ID = 0x04U /*!< TIM OC MspInit Callback ID */
+ ,HAL_TIM_OC_MSPDEINIT_CB_ID = 0x05U /*!< TIM OC MspDeInit Callback ID */
+ ,HAL_TIM_PWM_MSPINIT_CB_ID = 0x06U /*!< TIM PWM MspInit Callback ID */
+ ,HAL_TIM_PWM_MSPDEINIT_CB_ID = 0x07U /*!< TIM PWM MspDeInit Callback ID */
+ ,HAL_TIM_ONE_PULSE_MSPINIT_CB_ID = 0x08U /*!< TIM One Pulse MspInit Callback ID */
+ ,HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID = 0x09U /*!< TIM One Pulse MspDeInit Callback ID */
+ ,HAL_TIM_ENCODER_MSPINIT_CB_ID = 0x0AU /*!< TIM Encoder MspInit Callback ID */
+ ,HAL_TIM_ENCODER_MSPDEINIT_CB_ID = 0x0BU /*!< TIM Encoder MspDeInit Callback ID */
+ ,HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID = 0x0CU /*!< TIM Hall Sensor MspDeInit Callback ID */
+ ,HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID = 0x0DU /*!< TIM Hall Sensor MspDeInit Callback ID */
+ ,HAL_TIM_PERIOD_ELAPSED_CB_ID = 0x0EU /*!< TIM Period Elapsed Callback ID */
+ ,HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID = 0x0FU /*!< TIM Period Elapsed half complete Callback ID */
+ ,HAL_TIM_TRIGGER_CB_ID = 0x10U /*!< TIM Trigger Callback ID */
+ ,HAL_TIM_TRIGGER_HALF_CB_ID = 0x11U /*!< TIM Trigger half complete Callback ID */
+
+ ,HAL_TIM_IC_CAPTURE_CB_ID = 0x12U /*!< TIM Input Capture Callback ID */
+ ,HAL_TIM_IC_CAPTURE_HALF_CB_ID = 0x13U /*!< TIM Input Capture half complete Callback ID */
+ ,HAL_TIM_OC_DELAY_ELAPSED_CB_ID = 0x14U /*!< TIM Output Compare Delay Elapsed Callback ID */
+ ,HAL_TIM_PWM_PULSE_FINISHED_CB_ID = 0x15U /*!< TIM PWM Pulse Finished Callback ID */
+ ,HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID = 0x16U /*!< TIM PWM Pulse Finished half complete Callback ID */
+ ,HAL_TIM_ERROR_CB_ID = 0x17U /*!< TIM Error Callback ID */
+ ,HAL_TIM_COMMUTATION_CB_ID = 0x18U /*!< TIM Commutation Callback ID */
+ ,HAL_TIM_COMMUTATION_HALF_CB_ID = 0x19U /*!< TIM Commutation half complete Callback ID */
+ ,HAL_TIM_BREAK_CB_ID = 0x1AU /*!< TIM Break Callback ID */
+} HAL_TIM_CallbackIDTypeDef;
+
+/**
+ * @brief HAL TIM Callback pointer definition
+ */
+typedef void (*pTIM_CallbackTypeDef)(TIM_HandleTypeDef *htim); /*!< pointer to the TIM callback function */
+
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+
+/**
+ * @}
+ */
+/* End of exported types -----------------------------------------------------*/
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup TIM_Exported_Constants TIM Exported Constants
+ * @{
+ */
+
+/** @defgroup TIM_ClearInput_Source TIM Clear Input Source
+ * @{
+ */
+#define TIM_CLEARINPUTSOURCE_NONE 0x00000000U /*!< OCREF_CLR is disabled */
+#define TIM_CLEARINPUTSOURCE_ETR 0x00000001U /*!< OCREF_CLR is connected to ETRF input */
+#define TIM_CLEARINPUTSOURCE_OCREFCLR 0x00000002U /*!< OCREF_CLR is connected to OCREF_CLR_INT */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_DMA_Base_address TIM DMA Base Address
+ * @{
+ */
+#define TIM_DMABASE_CR1 0x00000000U
+#define TIM_DMABASE_CR2 0x00000001U
+#define TIM_DMABASE_SMCR 0x00000002U
+#define TIM_DMABASE_DIER 0x00000003U
+#define TIM_DMABASE_SR 0x00000004U
+#define TIM_DMABASE_EGR 0x00000005U
+#define TIM_DMABASE_CCMR1 0x00000006U
+#define TIM_DMABASE_CCMR2 0x00000007U
+#define TIM_DMABASE_CCER 0x00000008U
+#define TIM_DMABASE_CNT 0x00000009U
+#define TIM_DMABASE_PSC 0x0000000AU
+#define TIM_DMABASE_ARR 0x0000000BU
+#define TIM_DMABASE_RCR 0x0000000CU
+#define TIM_DMABASE_CCR1 0x0000000DU
+#define TIM_DMABASE_CCR2 0x0000000EU
+#define TIM_DMABASE_CCR3 0x0000000FU
+#define TIM_DMABASE_CCR4 0x00000010U
+#define TIM_DMABASE_BDTR 0x00000011U
+#define TIM_DMABASE_DCR 0x00000012U
+#define TIM_DMABASE_DMAR 0x00000013U
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Event_Source TIM Event Source
+ * @{
+ */
+#define TIM_EVENTSOURCE_UPDATE TIM_EGR_UG /*!< Reinitialize the counter and generates an update of the registers */
+#define TIM_EVENTSOURCE_CC1 TIM_EGR_CC1G /*!< A capture/compare event is generated on channel 1 */
+#define TIM_EVENTSOURCE_CC2 TIM_EGR_CC2G /*!< A capture/compare event is generated on channel 2 */
+#define TIM_EVENTSOURCE_CC3 TIM_EGR_CC3G /*!< A capture/compare event is generated on channel 3 */
+#define TIM_EVENTSOURCE_CC4 TIM_EGR_CC4G /*!< A capture/compare event is generated on channel 4 */
+#define TIM_EVENTSOURCE_COM TIM_EGR_COMG /*!< A commutation event is generated */
+#define TIM_EVENTSOURCE_TRIGGER TIM_EGR_TG /*!< A trigger event is generated */
+#define TIM_EVENTSOURCE_BREAK TIM_EGR_BG /*!< A break event is generated */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Input_Channel_Polarity TIM Input Channel polarity
+ * @{
+ */
+#define TIM_INPUTCHANNELPOLARITY_RISING 0x00000000U /*!< Polarity for TIx source */
+#define TIM_INPUTCHANNELPOLARITY_FALLING TIM_CCER_CC1P /*!< Polarity for TIx source */
+#define TIM_INPUTCHANNELPOLARITY_BOTHEDGE (TIM_CCER_CC1P | TIM_CCER_CC1NP) /*!< Polarity for TIx source */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ETR_Polarity TIM ETR Polarity
+ * @{
+ */
+#define TIM_ETRPOLARITY_INVERTED TIM_SMCR_ETP /*!< Polarity for ETR source */
+#define TIM_ETRPOLARITY_NONINVERTED 0x00000000U /*!< Polarity for ETR source */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ETR_Prescaler TIM ETR Prescaler
+ * @{
+ */
+#define TIM_ETRPRESCALER_DIV1 0x00000000U /*!< No prescaler is used */
+#define TIM_ETRPRESCALER_DIV2 TIM_SMCR_ETPS_0 /*!< ETR input source is divided by 2 */
+#define TIM_ETRPRESCALER_DIV4 TIM_SMCR_ETPS_1 /*!< ETR input source is divided by 4 */
+#define TIM_ETRPRESCALER_DIV8 TIM_SMCR_ETPS /*!< ETR input source is divided by 8 */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Counter_Mode TIM Counter Mode
+ * @{
+ */
+#define TIM_COUNTERMODE_UP 0x00000000U /*!< Counter used as up-counter */
+#define TIM_COUNTERMODE_DOWN TIM_CR1_DIR /*!< Counter used as down-counter */
+#define TIM_COUNTERMODE_CENTERALIGNED1 TIM_CR1_CMS_0 /*!< Center-aligned mode 1 */
+#define TIM_COUNTERMODE_CENTERALIGNED2 TIM_CR1_CMS_1 /*!< Center-aligned mode 2 */
+#define TIM_COUNTERMODE_CENTERALIGNED3 TIM_CR1_CMS /*!< Center-aligned mode 3 */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ClockDivision TIM Clock Division
+ * @{
+ */
+#define TIM_CLOCKDIVISION_DIV1 0x00000000U /*!< Clock division: tDTS=tCK_INT */
+#define TIM_CLOCKDIVISION_DIV2 TIM_CR1_CKD_0 /*!< Clock division: tDTS=2*tCK_INT */
+#define TIM_CLOCKDIVISION_DIV4 TIM_CR1_CKD_1 /*!< Clock division: tDTS=4*tCK_INT */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_State TIM Output Compare State
+ * @{
+ */
+#define TIM_OUTPUTSTATE_DISABLE 0x00000000U /*!< Capture/Compare 1 output disabled */
+#define TIM_OUTPUTSTATE_ENABLE TIM_CCER_CC1E /*!< Capture/Compare 1 output enabled */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_AutoReloadPreload TIM Auto-Reload Preload
+ * @{
+ */
+#define TIM_AUTORELOAD_PRELOAD_DISABLE 0x00000000U /*!< TIMx_ARR register is not buffered */
+#define TIM_AUTORELOAD_PRELOAD_ENABLE TIM_CR1_ARPE /*!< TIMx_ARR register is buffered */
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Fast_State TIM Output Fast State
+ * @{
+ */
+#define TIM_OCFAST_DISABLE 0x00000000U /*!< Output Compare fast disable */
+#define TIM_OCFAST_ENABLE TIM_CCMR1_OC1FE /*!< Output Compare fast enable */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_N_State TIM Complementary Output Compare State
+ * @{
+ */
+#define TIM_OUTPUTNSTATE_DISABLE 0x00000000U /*!< OCxN is disabled */
+#define TIM_OUTPUTNSTATE_ENABLE TIM_CCER_CC1NE /*!< OCxN is enabled */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_Polarity TIM Output Compare Polarity
+ * @{
+ */
+#define TIM_OCPOLARITY_HIGH 0x00000000U /*!< Capture/Compare output polarity */
+#define TIM_OCPOLARITY_LOW TIM_CCER_CC1P /*!< Capture/Compare output polarity */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_N_Polarity TIM Complementary Output Compare Polarity
+ * @{
+ */
+#define TIM_OCNPOLARITY_HIGH 0x00000000U /*!< Capture/Compare complementary output polarity */
+#define TIM_OCNPOLARITY_LOW TIM_CCER_CC1NP /*!< Capture/Compare complementary output polarity */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_Idle_State TIM Output Compare Idle State
+ * @{
+ */
+#define TIM_OCIDLESTATE_SET TIM_CR2_OIS1 /*!< Output Idle state: OCx=1 when MOE=0 */
+#define TIM_OCIDLESTATE_RESET 0x00000000U /*!< Output Idle state: OCx=0 when MOE=0 */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_N_Idle_State TIM Complementary Output Compare Idle State
+ * @{
+ */
+#define TIM_OCNIDLESTATE_SET TIM_CR2_OIS1N /*!< Complementary output Idle state: OCxN=1 when MOE=0 */
+#define TIM_OCNIDLESTATE_RESET 0x00000000U /*!< Complementary output Idle state: OCxN=0 when MOE=0 */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Input_Capture_Polarity TIM Input Capture Polarity
+ * @{
+ */
+#define TIM_ICPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Capture triggered by rising edge on timer input */
+#define TIM_ICPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Capture triggered by falling edge on timer input */
+#define TIM_ICPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Capture triggered by both rising and falling edges on timer input*/
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Encoder_Input_Polarity TIM Encoder Input Polarity
+ * @{
+ */
+#define TIM_ENCODERINPUTPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Encoder input with rising edge polarity */
+#define TIM_ENCODERINPUTPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Encoder input with falling edge polarity */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Input_Capture_Selection TIM Input Capture Selection
+ * @{
+ */
+#define TIM_ICSELECTION_DIRECTTI TIM_CCMR1_CC1S_0 /*!< TIM Input 1, 2, 3 or 4 is selected to be
+ connected to IC1, IC2, IC3 or IC4, respectively */
+#define TIM_ICSELECTION_INDIRECTTI TIM_CCMR1_CC1S_1 /*!< TIM Input 1, 2, 3 or 4 is selected to be
+ connected to IC2, IC1, IC4 or IC3, respectively */
+#define TIM_ICSELECTION_TRC TIM_CCMR1_CC1S /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to TRC */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Input_Capture_Prescaler TIM Input Capture Prescaler
+ * @{
+ */
+#define TIM_ICPSC_DIV1 0x00000000U /*!< Capture performed each time an edge is detected on the capture input */
+#define TIM_ICPSC_DIV2 TIM_CCMR1_IC1PSC_0 /*!< Capture performed once every 2 events */
+#define TIM_ICPSC_DIV4 TIM_CCMR1_IC1PSC_1 /*!< Capture performed once every 4 events */
+#define TIM_ICPSC_DIV8 TIM_CCMR1_IC1PSC /*!< Capture performed once every 8 events */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_One_Pulse_Mode TIM One Pulse Mode
+ * @{
+ */
+#define TIM_OPMODE_SINGLE TIM_CR1_OPM /*!< Counter stops counting at the next update event */
+#define TIM_OPMODE_REPETITIVE 0x00000000U /*!< Counter is not stopped at update event */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Encoder_Mode TIM Encoder Mode
+ * @{
+ */
+#define TIM_ENCODERMODE_TI1 TIM_SMCR_SMS_0 /*!< Quadrature encoder mode 1, x2 mode, counts up/down on TI1FP1 edge depending on TI2FP2 level */
+#define TIM_ENCODERMODE_TI2 TIM_SMCR_SMS_1 /*!< Quadrature encoder mode 2, x2 mode, counts up/down on TI2FP2 edge depending on TI1FP1 level. */
+#define TIM_ENCODERMODE_TI12 (TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0) /*!< Quadrature encoder mode 3, x4 mode, counts up/down on both TI1FP1 and TI2FP2 edges depending on the level of the other input. */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Interrupt_definition TIM interrupt Definition
+ * @{
+ */
+#define TIM_IT_UPDATE TIM_DIER_UIE /*!< Update interrupt */
+#define TIM_IT_CC1 TIM_DIER_CC1IE /*!< Capture/Compare 1 interrupt */
+#define TIM_IT_CC2 TIM_DIER_CC2IE /*!< Capture/Compare 2 interrupt */
+#define TIM_IT_CC3 TIM_DIER_CC3IE /*!< Capture/Compare 3 interrupt */
+#define TIM_IT_CC4 TIM_DIER_CC4IE /*!< Capture/Compare 4 interrupt */
+#define TIM_IT_COM TIM_DIER_COMIE /*!< Commutation interrupt */
+#define TIM_IT_TRIGGER TIM_DIER_TIE /*!< Trigger interrupt */
+#define TIM_IT_BREAK TIM_DIER_BIE /*!< Break interrupt */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Commutation_Source TIM Commutation Source
+ * @{
+ */
+#define TIM_COMMUTATION_TRGI TIM_CR2_CCUS /*!< When Capture/compare control bits are preloaded, they are updated by setting the COMG bit or when an rising edge occurs on trigger input */
+#define TIM_COMMUTATION_SOFTWARE 0x00000000U /*!< When Capture/compare control bits are preloaded, they are updated by setting the COMG bit */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_DMA_sources TIM DMA Sources
+ * @{
+ */
+#define TIM_DMA_UPDATE TIM_DIER_UDE /*!< DMA request is triggered by the update event */
+#define TIM_DMA_CC1 TIM_DIER_CC1DE /*!< DMA request is triggered by the capture/compare macth 1 event */
+#define TIM_DMA_CC2 TIM_DIER_CC2DE /*!< DMA request is triggered by the capture/compare macth 2 event event */
+#define TIM_DMA_CC3 TIM_DIER_CC3DE /*!< DMA request is triggered by the capture/compare macth 3 event event */
+#define TIM_DMA_CC4 TIM_DIER_CC4DE /*!< DMA request is triggered by the capture/compare macth 4 event event */
+#define TIM_DMA_COM TIM_DIER_COMDE /*!< DMA request is triggered by the commutation event */
+#define TIM_DMA_TRIGGER TIM_DIER_TDE /*!< DMA request is triggered by the trigger event */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Flag_definition TIM Flag Definition
+ * @{
+ */
+#define TIM_FLAG_UPDATE TIM_SR_UIF /*!< Update interrupt flag */
+#define TIM_FLAG_CC1 TIM_SR_CC1IF /*!< Capture/Compare 1 interrupt flag */
+#define TIM_FLAG_CC2 TIM_SR_CC2IF /*!< Capture/Compare 2 interrupt flag */
+#define TIM_FLAG_CC3 TIM_SR_CC3IF /*!< Capture/Compare 3 interrupt flag */
+#define TIM_FLAG_CC4 TIM_SR_CC4IF /*!< Capture/Compare 4 interrupt flag */
+#define TIM_FLAG_COM TIM_SR_COMIF /*!< Commutation interrupt flag */
+#define TIM_FLAG_TRIGGER TIM_SR_TIF /*!< Trigger interrupt flag */
+#define TIM_FLAG_BREAK TIM_SR_BIF /*!< Break interrupt flag */
+#define TIM_FLAG_CC1OF TIM_SR_CC1OF /*!< Capture 1 overcapture flag */
+#define TIM_FLAG_CC2OF TIM_SR_CC2OF /*!< Capture 2 overcapture flag */
+#define TIM_FLAG_CC3OF TIM_SR_CC3OF /*!< Capture 3 overcapture flag */
+#define TIM_FLAG_CC4OF TIM_SR_CC4OF /*!< Capture 4 overcapture flag */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Channel TIM Channel
+ * @{
+ */
+#define TIM_CHANNEL_1 0x00000000U /*!< Capture/compare channel 1 identifier */
+#define TIM_CHANNEL_2 0x00000004U /*!< Capture/compare channel 2 identifier */
+#define TIM_CHANNEL_3 0x00000008U /*!< Capture/compare channel 3 identifier */
+#define TIM_CHANNEL_4 0x0000000CU /*!< Capture/compare channel 4 identifier */
+#define TIM_CHANNEL_ALL 0x0000003CU /*!< Global Capture/compare channel identifier */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Clock_Source TIM Clock Source
+ * @{
+ */
+#define TIM_CLOCKSOURCE_ETRMODE2 TIM_SMCR_ETPS_1 /*!< External clock source mode 2 */
+#define TIM_CLOCKSOURCE_INTERNAL TIM_SMCR_ETPS_0 /*!< Internal clock source */
+#define TIM_CLOCKSOURCE_ITR0 TIM_TS_ITR0 /*!< External clock source mode 1 (ITR0) */
+#define TIM_CLOCKSOURCE_ITR1 TIM_TS_ITR1 /*!< External clock source mode 1 (ITR1) */
+#define TIM_CLOCKSOURCE_ITR2 TIM_TS_ITR2 /*!< External clock source mode 1 (ITR2) */
+#define TIM_CLOCKSOURCE_ITR3 TIM_TS_ITR3 /*!< External clock source mode 1 (ITR3) */
+#define TIM_CLOCKSOURCE_TI1ED TIM_TS_TI1F_ED /*!< External clock source mode 1 (TTI1FP1 + edge detect.) */
+#define TIM_CLOCKSOURCE_TI1 TIM_TS_TI1FP1 /*!< External clock source mode 1 (TTI1FP1) */
+#define TIM_CLOCKSOURCE_TI2 TIM_TS_TI2FP2 /*!< External clock source mode 1 (TTI2FP2) */
+#define TIM_CLOCKSOURCE_ETRMODE1 TIM_TS_ETRF /*!< External clock source mode 1 (ETRF) */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Clock_Polarity TIM Clock Polarity
+ * @{
+ */
+#define TIM_CLOCKPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx clock sources */
+#define TIM_CLOCKPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx clock sources */
+#define TIM_CLOCKPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIx clock sources */
+#define TIM_CLOCKPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIx clock sources */
+#define TIM_CLOCKPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIx clock sources */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Clock_Prescaler TIM Clock Prescaler
+ * @{
+ */
+#define TIM_CLOCKPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */
+#define TIM_CLOCKPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Clock: Capture performed once every 2 events. */
+#define TIM_CLOCKPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Clock: Capture performed once every 4 events. */
+#define TIM_CLOCKPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Clock: Capture performed once every 8 events. */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ClearInput_Polarity TIM Clear Input Polarity
+ * @{
+ */
+#define TIM_CLEARINPUTPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx pin */
+#define TIM_CLEARINPUTPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx pin */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ClearInput_Prescaler TIM Clear Input Prescaler
+ * @{
+ */
+#define TIM_CLEARINPUTPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */
+#define TIM_CLEARINPUTPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR pin: Capture performed once every 2 events. */
+#define TIM_CLEARINPUTPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR pin: Capture performed once every 4 events. */
+#define TIM_CLEARINPUTPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR pin: Capture performed once every 8 events. */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_OSSR_Off_State_Selection_for_Run_mode_state TIM OSSR OffState Selection for Run mode state
+ * @{
+ */
+#define TIM_OSSR_ENABLE TIM_BDTR_OSSR /*!< When inactive, OC/OCN outputs are enabled (still controlled by the timer) */
+#define TIM_OSSR_DISABLE 0x00000000U /*!< When inactive, OC/OCN outputs are disabled (not controlled any longer by the timer) */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_OSSI_Off_State_Selection_for_Idle_mode_state TIM OSSI OffState Selection for Idle mode state
+ * @{
+ */
+#define TIM_OSSI_ENABLE TIM_BDTR_OSSI /*!< When inactive, OC/OCN outputs are enabled (still controlled by the timer) */
+#define TIM_OSSI_DISABLE 0x00000000U /*!< When inactive, OC/OCN outputs are disabled (not controlled any longer by the timer) */
+/**
+ * @}
+ */
+/** @defgroup TIM_Lock_level TIM Lock level
+ * @{
+ */
+#define TIM_LOCKLEVEL_OFF 0x00000000U /*!< LOCK OFF */
+#define TIM_LOCKLEVEL_1 TIM_BDTR_LOCK_0 /*!< LOCK Level 1 */
+#define TIM_LOCKLEVEL_2 TIM_BDTR_LOCK_1 /*!< LOCK Level 2 */
+#define TIM_LOCKLEVEL_3 TIM_BDTR_LOCK /*!< LOCK Level 3 */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Break_Input_enable_disable TIM Break Input Enable
+ * @{
+ */
+#define TIM_BREAK_ENABLE TIM_BDTR_BKE /*!< Break input BRK is enabled */
+#define TIM_BREAK_DISABLE 0x00000000U /*!< Break input BRK is disabled */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Break_Polarity TIM Break Input Polarity
+ * @{
+ */
+#define TIM_BREAKPOLARITY_LOW 0x00000000U /*!< Break input BRK is active low */
+#define TIM_BREAKPOLARITY_HIGH TIM_BDTR_BKP /*!< Break input BRK is active high */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_AOE_Bit_Set_Reset TIM Automatic Output Enable
+ * @{
+ */
+#define TIM_AUTOMATICOUTPUT_DISABLE 0x00000000U /*!< MOE can be set only by software */
+#define TIM_AUTOMATICOUTPUT_ENABLE TIM_BDTR_AOE /*!< MOE can be set by software or automatically at the next update event
+ (if none of the break inputs BRK and BRK2 is active) */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Master_Mode_Selection TIM Master Mode Selection
+ * @{
+ */
+#define TIM_TRGO_RESET 0x00000000U /*!< TIMx_EGR.UG bit is used as trigger output (TRGO) */
+#define TIM_TRGO_ENABLE TIM_CR2_MMS_0 /*!< TIMx_CR1.CEN bit is used as trigger output (TRGO) */
+#define TIM_TRGO_UPDATE TIM_CR2_MMS_1 /*!< Update event is used as trigger output (TRGO) */
+#define TIM_TRGO_OC1 (TIM_CR2_MMS_1 | TIM_CR2_MMS_0) /*!< Capture or a compare match 1 is used as trigger output (TRGO) */
+#define TIM_TRGO_OC1REF TIM_CR2_MMS_2 /*!< OC1REF signal is used as trigger output (TRGO) */
+#define TIM_TRGO_OC2REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_0) /*!< OC2REF signal is used as trigger output(TRGO) */
+#define TIM_TRGO_OC3REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_1) /*!< OC3REF signal is used as trigger output(TRGO) */
+#define TIM_TRGO_OC4REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_1 | TIM_CR2_MMS_0) /*!< OC4REF signal is used as trigger output(TRGO) */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Master_Slave_Mode TIM Master/Slave Mode
+ * @{
+ */
+#define TIM_MASTERSLAVEMODE_ENABLE TIM_SMCR_MSM /*!< No action */
+#define TIM_MASTERSLAVEMODE_DISABLE 0x00000000U /*!< Master/slave mode is selected */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Slave_Mode TIM Slave mode
+ * @{
+ */
+#define TIM_SLAVEMODE_DISABLE 0x00000000U /*!< Slave mode disabled */
+#define TIM_SLAVEMODE_RESET TIM_SMCR_SMS_2 /*!< Reset Mode */
+#define TIM_SLAVEMODE_GATED (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_0) /*!< Gated Mode */
+#define TIM_SLAVEMODE_TRIGGER (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1) /*!< Trigger Mode */
+#define TIM_SLAVEMODE_EXTERNAL1 (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0) /*!< External Clock Mode 1 */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_and_PWM_modes TIM Output Compare and PWM Modes
+ * @{
+ */
+#define TIM_OCMODE_TIMING 0x00000000U /*!< Frozen */
+#define TIM_OCMODE_ACTIVE TIM_CCMR1_OC1M_0 /*!< Set channel to active level on match */
+#define TIM_OCMODE_INACTIVE TIM_CCMR1_OC1M_1 /*!< Set channel to inactive level on match */
+#define TIM_OCMODE_TOGGLE (TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0) /*!< Toggle */
+#define TIM_OCMODE_PWM1 (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1) /*!< PWM mode 1 */
+#define TIM_OCMODE_PWM2 (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0) /*!< PWM mode 2 */
+#define TIM_OCMODE_FORCED_ACTIVE (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_0) /*!< Force active level */
+#define TIM_OCMODE_FORCED_INACTIVE TIM_CCMR1_OC1M_2 /*!< Force inactive level */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Trigger_Selection TIM Trigger Selection
+ * @{
+ */
+#define TIM_TS_ITR0 0x00000000U /*!< Internal Trigger 0 (ITR0) */
+#define TIM_TS_ITR1 TIM_SMCR_TS_0 /*!< Internal Trigger 1 (ITR1) */
+#define TIM_TS_ITR2 TIM_SMCR_TS_1 /*!< Internal Trigger 2 (ITR2) */
+#define TIM_TS_ITR3 (TIM_SMCR_TS_0 | TIM_SMCR_TS_1) /*!< Internal Trigger 3 (ITR3) */
+#define TIM_TS_TI1F_ED TIM_SMCR_TS_2 /*!< TI1 Edge Detector (TI1F_ED) */
+#define TIM_TS_TI1FP1 (TIM_SMCR_TS_0 | TIM_SMCR_TS_2) /*!< Filtered Timer Input 1 (TI1FP1) */
+#define TIM_TS_TI2FP2 (TIM_SMCR_TS_1 | TIM_SMCR_TS_2) /*!< Filtered Timer Input 2 (TI2FP2) */
+#define TIM_TS_ETRF (TIM_SMCR_TS_0 | TIM_SMCR_TS_1 | TIM_SMCR_TS_2) /*!< Filtered External Trigger input (ETRF) */
+#define TIM_TS_NONE 0x0000FFFFU /*!< No trigger selected */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Trigger_Polarity TIM Trigger Polarity
+ * @{
+ */
+#define TIM_TRIGGERPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx trigger sources */
+#define TIM_TRIGGERPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx trigger sources */
+#define TIM_TRIGGERPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIxFPx or TI1_ED trigger sources */
+#define TIM_TRIGGERPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIxFPx or TI1_ED trigger sources */
+#define TIM_TRIGGERPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIxFPx or TI1_ED trigger sources */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Trigger_Prescaler TIM Trigger Prescaler
+ * @{
+ */
+#define TIM_TRIGGERPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */
+#define TIM_TRIGGERPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Trigger: Capture performed once every 2 events. */
+#define TIM_TRIGGERPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Trigger: Capture performed once every 4 events. */
+#define TIM_TRIGGERPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Trigger: Capture performed once every 8 events. */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_TI1_Selection TIM TI1 Input Selection
+ * @{
+ */
+#define TIM_TI1SELECTION_CH1 0x00000000U /*!< The TIMx_CH1 pin is connected to TI1 input */
+#define TIM_TI1SELECTION_XORCOMBINATION TIM_CR2_TI1S /*!< The TIMx_CH1, CH2 and CH3 pins are connected to the TI1 input (XOR combination) */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_DMA_Burst_Length TIM DMA Burst Length
+ * @{
+ */
+#define TIM_DMABURSTLENGTH_1TRANSFER 0x00000000U /*!< The transfer is done to 1 register starting trom TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_2TRANSFERS 0x00000100U /*!< The transfer is done to 2 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_3TRANSFERS 0x00000200U /*!< The transfer is done to 3 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_4TRANSFERS 0x00000300U /*!< The transfer is done to 4 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_5TRANSFERS 0x00000400U /*!< The transfer is done to 5 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_6TRANSFERS 0x00000500U /*!< The transfer is done to 6 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_7TRANSFERS 0x00000600U /*!< The transfer is done to 7 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_8TRANSFERS 0x00000700U /*!< The transfer is done to 8 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_9TRANSFERS 0x00000800U /*!< The transfer is done to 9 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_10TRANSFERS 0x00000900U /*!< The transfer is done to 10 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_11TRANSFERS 0x00000A00U /*!< The transfer is done to 11 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_12TRANSFERS 0x00000B00U /*!< The transfer is done to 12 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_13TRANSFERS 0x00000C00U /*!< The transfer is done to 13 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_14TRANSFERS 0x00000D00U /*!< The transfer is done to 14 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_15TRANSFERS 0x00000E00U /*!< The transfer is done to 15 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_16TRANSFERS 0x00000F00U /*!< The transfer is done to 16 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_17TRANSFERS 0x00001000U /*!< The transfer is done to 17 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_18TRANSFERS 0x00001100U /*!< The transfer is done to 18 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Handle_index TIM DMA Handle Index
+ * @{
+ */
+#define TIM_DMA_ID_UPDATE ((uint16_t) 0x0000) /*!< Index of the DMA handle used for Update DMA requests */
+#define TIM_DMA_ID_CC1 ((uint16_t) 0x0001) /*!< Index of the DMA handle used for Capture/Compare 1 DMA requests */
+#define TIM_DMA_ID_CC2 ((uint16_t) 0x0002) /*!< Index of the DMA handle used for Capture/Compare 2 DMA requests */
+#define TIM_DMA_ID_CC3 ((uint16_t) 0x0003) /*!< Index of the DMA handle used for Capture/Compare 3 DMA requests */
+#define TIM_DMA_ID_CC4 ((uint16_t) 0x0004) /*!< Index of the DMA handle used for Capture/Compare 4 DMA requests */
+#define TIM_DMA_ID_COMMUTATION ((uint16_t) 0x0005) /*!< Index of the DMA handle used for Commutation DMA requests */
+#define TIM_DMA_ID_TRIGGER ((uint16_t) 0x0006) /*!< Index of the DMA handle used for Trigger DMA requests */
+/**
+ * @}
+ */
+
+/** @defgroup Channel_CC_State TIM Capture/Compare Channel State
+ * @{
+ */
+#define TIM_CCx_ENABLE 0x00000001U /*!< Input or output channel is enabled */
+#define TIM_CCx_DISABLE 0x00000000U /*!< Input or output channel is disabled */
+#define TIM_CCxN_ENABLE 0x00000004U /*!< Complementary output channel is enabled */
+#define TIM_CCxN_DISABLE 0x00000000U /*!< Complementary output channel is enabled */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* End of exported constants -------------------------------------------------*/
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup TIM_Exported_Macros TIM Exported Macros
+ * @{
+ */
+
+/** @brief Reset TIM handle state.
+ * @param __HANDLE__ TIM handle.
+ * @retval None
+ */
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+#define __HAL_TIM_RESET_HANDLE_STATE(__HANDLE__) do { \
+ (__HANDLE__)->State = HAL_TIM_STATE_RESET; \
+ (__HANDLE__)->Base_MspInitCallback = NULL; \
+ (__HANDLE__)->Base_MspDeInitCallback = NULL; \
+ (__HANDLE__)->IC_MspInitCallback = NULL; \
+ (__HANDLE__)->IC_MspDeInitCallback = NULL; \
+ (__HANDLE__)->OC_MspInitCallback = NULL; \
+ (__HANDLE__)->OC_MspDeInitCallback = NULL; \
+ (__HANDLE__)->PWM_MspInitCallback = NULL; \
+ (__HANDLE__)->PWM_MspDeInitCallback = NULL; \
+ (__HANDLE__)->OnePulse_MspInitCallback = NULL; \
+ (__HANDLE__)->OnePulse_MspDeInitCallback = NULL; \
+ (__HANDLE__)->Encoder_MspInitCallback = NULL; \
+ (__HANDLE__)->Encoder_MspDeInitCallback = NULL; \
+ (__HANDLE__)->HallSensor_MspInitCallback = NULL; \
+ (__HANDLE__)->HallSensor_MspDeInitCallback = NULL; \
+ } while(0)
+#else
+#define __HAL_TIM_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_TIM_STATE_RESET)
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+
+/**
+ * @brief Enable the TIM peripheral.
+ * @param __HANDLE__ TIM handle
+ * @retval None
+ */
+#define __HAL_TIM_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1|=(TIM_CR1_CEN))
+
+/**
+ * @brief Enable the TIM main Output.
+ * @param __HANDLE__ TIM handle
+ * @retval None
+ */
+#define __HAL_TIM_MOE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->BDTR|=(TIM_BDTR_MOE))
+
+/**
+ * @brief Disable the TIM peripheral.
+ * @param __HANDLE__ TIM handle
+ * @retval None
+ */
+#define __HAL_TIM_DISABLE(__HANDLE__) \
+ do { \
+ if (((__HANDLE__)->Instance->CCER & TIM_CCER_CCxE_MASK) == 0UL) \
+ { \
+ if(((__HANDLE__)->Instance->CCER & TIM_CCER_CCxNE_MASK) == 0UL) \
+ { \
+ (__HANDLE__)->Instance->CR1 &= ~(TIM_CR1_CEN); \
+ } \
+ } \
+ } while(0)
+
+/**
+ * @brief Disable the TIM main Output.
+ * @param __HANDLE__ TIM handle
+ * @retval None
+ * @note The Main Output Enable of a timer instance is disabled only if all the CCx and CCxN channels have been disabled
+ */
+#define __HAL_TIM_MOE_DISABLE(__HANDLE__) \
+ do { \
+ if (((__HANDLE__)->Instance->CCER & TIM_CCER_CCxE_MASK) == 0UL) \
+ { \
+ if(((__HANDLE__)->Instance->CCER & TIM_CCER_CCxNE_MASK) == 0UL) \
+ { \
+ (__HANDLE__)->Instance->BDTR &= ~(TIM_BDTR_MOE); \
+ } \
+ } \
+ } while(0)
+
+/**
+ * @brief Disable the TIM main Output.
+ * @param __HANDLE__ TIM handle
+ * @retval None
+ * @note The Main Output Enable of a timer instance is disabled unconditionally
+ */
+#define __HAL_TIM_MOE_DISABLE_UNCONDITIONALLY(__HANDLE__) (__HANDLE__)->Instance->BDTR &= ~(TIM_BDTR_MOE)
+
+/** @brief Enable the specified TIM interrupt.
+ * @param __HANDLE__ specifies the TIM Handle.
+ * @param __INTERRUPT__ specifies the TIM interrupt source to enable.
+ * This parameter can be one of the following values:
+ * @arg TIM_IT_UPDATE: Update interrupt
+ * @arg TIM_IT_CC1: Capture/Compare 1 interrupt
+ * @arg TIM_IT_CC2: Capture/Compare 2 interrupt
+ * @arg TIM_IT_CC3: Capture/Compare 3 interrupt
+ * @arg TIM_IT_CC4: Capture/Compare 4 interrupt
+ * @arg TIM_IT_COM: Commutation interrupt
+ * @arg TIM_IT_TRIGGER: Trigger interrupt
+ * @arg TIM_IT_BREAK: Break interrupt
+ * @retval None
+ */
+#define __HAL_TIM_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER |= (__INTERRUPT__))
+
+/** @brief Disable the specified TIM interrupt.
+ * @param __HANDLE__ specifies the TIM Handle.
+ * @param __INTERRUPT__ specifies the TIM interrupt source to disable.
+ * This parameter can be one of the following values:
+ * @arg TIM_IT_UPDATE: Update interrupt
+ * @arg TIM_IT_CC1: Capture/Compare 1 interrupt
+ * @arg TIM_IT_CC2: Capture/Compare 2 interrupt
+ * @arg TIM_IT_CC3: Capture/Compare 3 interrupt
+ * @arg TIM_IT_CC4: Capture/Compare 4 interrupt
+ * @arg TIM_IT_COM: Commutation interrupt
+ * @arg TIM_IT_TRIGGER: Trigger interrupt
+ * @arg TIM_IT_BREAK: Break interrupt
+ * @retval None
+ */
+#define __HAL_TIM_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER &= ~(__INTERRUPT__))
+
+/** @brief Enable the specified DMA request.
+ * @param __HANDLE__ specifies the TIM Handle.
+ * @param __DMA__ specifies the TIM DMA request to enable.
+ * This parameter can be one of the following values:
+ * @arg TIM_DMA_UPDATE: Update DMA request
+ * @arg TIM_DMA_CC1: Capture/Compare 1 DMA request
+ * @arg TIM_DMA_CC2: Capture/Compare 2 DMA request
+ * @arg TIM_DMA_CC3: Capture/Compare 3 DMA request
+ * @arg TIM_DMA_CC4: Capture/Compare 4 DMA request
+ * @arg TIM_DMA_COM: Commutation DMA request
+ * @arg TIM_DMA_TRIGGER: Trigger DMA request
+ * @retval None
+ */
+#define __HAL_TIM_ENABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER |= (__DMA__))
+
+/** @brief Disable the specified DMA request.
+ * @param __HANDLE__ specifies the TIM Handle.
+ * @param __DMA__ specifies the TIM DMA request to disable.
+ * This parameter can be one of the following values:
+ * @arg TIM_DMA_UPDATE: Update DMA request
+ * @arg TIM_DMA_CC1: Capture/Compare 1 DMA request
+ * @arg TIM_DMA_CC2: Capture/Compare 2 DMA request
+ * @arg TIM_DMA_CC3: Capture/Compare 3 DMA request
+ * @arg TIM_DMA_CC4: Capture/Compare 4 DMA request
+ * @arg TIM_DMA_COM: Commutation DMA request
+ * @arg TIM_DMA_TRIGGER: Trigger DMA request
+ * @retval None
+ */
+#define __HAL_TIM_DISABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER &= ~(__DMA__))
+
+/** @brief Check whether the specified TIM interrupt flag is set or not.
+ * @param __HANDLE__ specifies the TIM Handle.
+ * @param __FLAG__ specifies the TIM interrupt flag to check.
+ * This parameter can be one of the following values:
+ * @arg TIM_FLAG_UPDATE: Update interrupt flag
+ * @arg TIM_FLAG_CC1: Capture/Compare 1 interrupt flag
+ * @arg TIM_FLAG_CC2: Capture/Compare 2 interrupt flag
+ * @arg TIM_FLAG_CC3: Capture/Compare 3 interrupt flag
+ * @arg TIM_FLAG_CC4: Capture/Compare 4 interrupt flag
+ * @arg TIM_FLAG_COM: Commutation interrupt flag
+ * @arg TIM_FLAG_TRIGGER: Trigger interrupt flag
+ * @arg TIM_FLAG_BREAK: Break interrupt flag
+ * @arg TIM_FLAG_CC1OF: Capture/Compare 1 overcapture flag
+ * @arg TIM_FLAG_CC2OF: Capture/Compare 2 overcapture flag
+ * @arg TIM_FLAG_CC3OF: Capture/Compare 3 overcapture flag
+ * @arg TIM_FLAG_CC4OF: Capture/Compare 4 overcapture flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_TIM_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR &(__FLAG__)) == (__FLAG__))
+
+/** @brief Clear the specified TIM interrupt flag.
+ * @param __HANDLE__ specifies the TIM Handle.
+ * @param __FLAG__ specifies the TIM interrupt flag to clear.
+ * This parameter can be one of the following values:
+ * @arg TIM_FLAG_UPDATE: Update interrupt flag
+ * @arg TIM_FLAG_CC1: Capture/Compare 1 interrupt flag
+ * @arg TIM_FLAG_CC2: Capture/Compare 2 interrupt flag
+ * @arg TIM_FLAG_CC3: Capture/Compare 3 interrupt flag
+ * @arg TIM_FLAG_CC4: Capture/Compare 4 interrupt flag
+ * @arg TIM_FLAG_COM: Commutation interrupt flag
+ * @arg TIM_FLAG_TRIGGER: Trigger interrupt flag
+ * @arg TIM_FLAG_BREAK: Break interrupt flag
+ * @arg TIM_FLAG_CC1OF: Capture/Compare 1 overcapture flag
+ * @arg TIM_FLAG_CC2OF: Capture/Compare 2 overcapture flag
+ * @arg TIM_FLAG_CC3OF: Capture/Compare 3 overcapture flag
+ * @arg TIM_FLAG_CC4OF: Capture/Compare 4 overcapture flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_TIM_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__))
+
+/**
+ * @brief Check whether the specified TIM interrupt source is enabled or not.
+ * @param __HANDLE__ TIM handle
+ * @param __INTERRUPT__ specifies the TIM interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg TIM_IT_UPDATE: Update interrupt
+ * @arg TIM_IT_CC1: Capture/Compare 1 interrupt
+ * @arg TIM_IT_CC2: Capture/Compare 2 interrupt
+ * @arg TIM_IT_CC3: Capture/Compare 3 interrupt
+ * @arg TIM_IT_CC4: Capture/Compare 4 interrupt
+ * @arg TIM_IT_COM: Commutation interrupt
+ * @arg TIM_IT_TRIGGER: Trigger interrupt
+ * @arg TIM_IT_BREAK: Break interrupt
+ * @retval The state of TIM_IT (SET or RESET).
+ */
+#define __HAL_TIM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->DIER & (__INTERRUPT__)) \
+ == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief Clear the TIM interrupt pending bits.
+ * @param __HANDLE__ TIM handle
+ * @param __INTERRUPT__ specifies the interrupt pending bit to clear.
+ * This parameter can be one of the following values:
+ * @arg TIM_IT_UPDATE: Update interrupt
+ * @arg TIM_IT_CC1: Capture/Compare 1 interrupt
+ * @arg TIM_IT_CC2: Capture/Compare 2 interrupt
+ * @arg TIM_IT_CC3: Capture/Compare 3 interrupt
+ * @arg TIM_IT_CC4: Capture/Compare 4 interrupt
+ * @arg TIM_IT_COM: Commutation interrupt
+ * @arg TIM_IT_TRIGGER: Trigger interrupt
+ * @arg TIM_IT_BREAK: Break interrupt
+ * @retval None
+ */
+#define __HAL_TIM_CLEAR_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->SR = ~(__INTERRUPT__))
+
+/**
+ * @brief Indicates whether or not the TIM Counter is used as downcounter.
+ * @param __HANDLE__ TIM handle.
+ * @retval False (Counter used as upcounter) or True (Counter used as downcounter)
+ * @note This macro is particularly useful to get the counting mode when the timer operates in Center-aligned mode or Encoder
+mode.
+ */
+#define __HAL_TIM_IS_TIM_COUNTING_DOWN(__HANDLE__) (((__HANDLE__)->Instance->CR1 &(TIM_CR1_DIR)) == (TIM_CR1_DIR))
+
+/**
+ * @brief Set the TIM Prescaler on runtime.
+ * @param __HANDLE__ TIM handle.
+ * @param __PRESC__ specifies the Prescaler new value.
+ * @retval None
+ */
+#define __HAL_TIM_SET_PRESCALER(__HANDLE__, __PRESC__) ((__HANDLE__)->Instance->PSC = (__PRESC__))
+
+/**
+ * @brief Set the TIM Counter Register value on runtime.
+ * @param __HANDLE__ TIM handle.
+ * @param __COUNTER__ specifies the Counter register new value.
+ * @retval None
+ */
+#define __HAL_TIM_SET_COUNTER(__HANDLE__, __COUNTER__) ((__HANDLE__)->Instance->CNT = (__COUNTER__))
+
+/**
+ * @brief Get the TIM Counter Register value on runtime.
+ * @param __HANDLE__ TIM handle.
+ * @retval 16-bit or 32-bit value of the timer counter register (TIMx_CNT)
+ */
+#define __HAL_TIM_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->CNT)
+
+/**
+ * @brief Set the TIM Autoreload Register value on runtime without calling another time any Init function.
+ * @param __HANDLE__ TIM handle.
+ * @param __AUTORELOAD__ specifies the Counter register new value.
+ * @retval None
+ */
+#define __HAL_TIM_SET_AUTORELOAD(__HANDLE__, __AUTORELOAD__) \
+ do{ \
+ (__HANDLE__)->Instance->ARR = (__AUTORELOAD__); \
+ (__HANDLE__)->Init.Period = (__AUTORELOAD__); \
+ } while(0)
+
+/**
+ * @brief Get the TIM Autoreload Register value on runtime.
+ * @param __HANDLE__ TIM handle.
+ * @retval 16-bit or 32-bit value of the timer auto-reload register(TIMx_ARR)
+ */
+#define __HAL_TIM_GET_AUTORELOAD(__HANDLE__) ((__HANDLE__)->Instance->ARR)
+
+/**
+ * @brief Set the TIM Clock Division value on runtime without calling another time any Init function.
+ * @param __HANDLE__ TIM handle.
+ * @param __CKD__ specifies the clock division value.
+ * This parameter can be one of the following value:
+ * @arg TIM_CLOCKDIVISION_DIV1: tDTS=tCK_INT
+ * @arg TIM_CLOCKDIVISION_DIV2: tDTS=2*tCK_INT
+ * @arg TIM_CLOCKDIVISION_DIV4: tDTS=4*tCK_INT
+ * @retval None
+ */
+#define __HAL_TIM_SET_CLOCKDIVISION(__HANDLE__, __CKD__) \
+ do{ \
+ (__HANDLE__)->Instance->CR1 &= (~TIM_CR1_CKD); \
+ (__HANDLE__)->Instance->CR1 |= (__CKD__); \
+ (__HANDLE__)->Init.ClockDivision = (__CKD__); \
+ } while(0)
+
+/**
+ * @brief Get the TIM Clock Division value on runtime.
+ * @param __HANDLE__ TIM handle.
+ * @retval The clock division can be one of the following values:
+ * @arg TIM_CLOCKDIVISION_DIV1: tDTS=tCK_INT
+ * @arg TIM_CLOCKDIVISION_DIV2: tDTS=2*tCK_INT
+ * @arg TIM_CLOCKDIVISION_DIV4: tDTS=4*tCK_INT
+ */
+#define __HAL_TIM_GET_CLOCKDIVISION(__HANDLE__) ((__HANDLE__)->Instance->CR1 & TIM_CR1_CKD)
+
+/**
+ * @brief Set the TIM Input Capture prescaler on runtime without calling another time HAL_TIM_IC_ConfigChannel() function.
+ * @param __HANDLE__ TIM handle.
+ * @param __CHANNEL__ TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @param __ICPSC__ specifies the Input Capture4 prescaler new value.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPSC_DIV1: no prescaler
+ * @arg TIM_ICPSC_DIV2: capture is done once every 2 events
+ * @arg TIM_ICPSC_DIV4: capture is done once every 4 events
+ * @arg TIM_ICPSC_DIV8: capture is done once every 8 events
+ * @retval None
+ */
+#define __HAL_TIM_SET_ICPRESCALER(__HANDLE__, __CHANNEL__, __ICPSC__) \
+ do{ \
+ TIM_RESET_ICPRESCALERVALUE((__HANDLE__), (__CHANNEL__)); \
+ TIM_SET_ICPRESCALERVALUE((__HANDLE__), (__CHANNEL__), (__ICPSC__)); \
+ } while(0)
+
+/**
+ * @brief Get the TIM Input Capture prescaler on runtime.
+ * @param __HANDLE__ TIM handle.
+ * @param __CHANNEL__ TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: get input capture 1 prescaler value
+ * @arg TIM_CHANNEL_2: get input capture 2 prescaler value
+ * @arg TIM_CHANNEL_3: get input capture 3 prescaler value
+ * @arg TIM_CHANNEL_4: get input capture 4 prescaler value
+ * @retval The input capture prescaler can be one of the following values:
+ * @arg TIM_ICPSC_DIV1: no prescaler
+ * @arg TIM_ICPSC_DIV2: capture is done once every 2 events
+ * @arg TIM_ICPSC_DIV4: capture is done once every 4 events
+ * @arg TIM_ICPSC_DIV8: capture is done once every 8 events
+ */
+#define __HAL_TIM_GET_ICPRESCALER(__HANDLE__, __CHANNEL__) \
+ (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC1PSC) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? (((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC2PSC) >> 8U) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC3PSC) :\
+ (((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC4PSC)) >> 8U)
+
+/**
+ * @brief Set the TIM Capture Compare Register value on runtime without calling another time ConfigChannel function.
+ * @param __HANDLE__ TIM handle.
+ * @param __CHANNEL__ TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @param __COMPARE__ specifies the Capture Compare register new value.
+ * @retval None
+ */
+#define __HAL_TIM_SET_COMPARE(__HANDLE__, __CHANNEL__, __COMPARE__) \
+ (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCR1 = (__COMPARE__)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCR2 = (__COMPARE__)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCR3 = (__COMPARE__)) :\
+ ((__HANDLE__)->Instance->CCR4 = (__COMPARE__)))
+
+/**
+ * @brief Get the TIM Capture Compare Register value on runtime.
+ * @param __HANDLE__ TIM handle.
+ * @param __CHANNEL__ TIM Channel associated with the capture compare register
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: get capture/compare 1 register value
+ * @arg TIM_CHANNEL_2: get capture/compare 2 register value
+ * @arg TIM_CHANNEL_3: get capture/compare 3 register value
+ * @arg TIM_CHANNEL_4: get capture/compare 4 register value
+ * @retval 16-bit or 32-bit value of the capture/compare register (TIMx_CCRy)
+ */
+#define __HAL_TIM_GET_COMPARE(__HANDLE__, __CHANNEL__) \
+ (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCR1) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCR2) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCR3) :\
+ ((__HANDLE__)->Instance->CCR4))
+
+/**
+ * @brief Set the TIM Output compare preload.
+ * @param __HANDLE__ TIM handle.
+ * @param __CHANNEL__ TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval None
+ */
+#define __HAL_TIM_ENABLE_OCxPRELOAD(__HANDLE__, __CHANNEL__) \
+ (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC1PE) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC2PE) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC3PE) :\
+ ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC4PE))
+
+/**
+ * @brief Reset the TIM Output compare preload.
+ * @param __HANDLE__ TIM handle.
+ * @param __CHANNEL__ TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval None
+ */
+#define __HAL_TIM_DISABLE_OCxPRELOAD(__HANDLE__, __CHANNEL__) \
+ (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC1PE) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC2PE) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC3PE) :\
+ ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC4PE))
+
+/**
+ * @brief Enable fast mode for a given channel.
+ * @param __HANDLE__ TIM handle.
+ * @param __CHANNEL__ TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @note When fast mode is enabled an active edge on the trigger input acts
+ * like a compare match on CCx output. Delay to sample the trigger
+ * input and to activate CCx output is reduced to 3 clock cycles.
+ * @note Fast mode acts only if the channel is configured in PWM1 or PWM2 mode.
+ * @retval None
+ */
+#define __HAL_TIM_ENABLE_OCxFAST(__HANDLE__, __CHANNEL__) \
+ (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC1FE) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC2FE) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC3FE) :\
+ ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC4FE))
+
+/**
+ * @brief Disable fast mode for a given channel.
+ * @param __HANDLE__ TIM handle.
+ * @param __CHANNEL__ TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @note When fast mode is disabled CCx output behaves normally depending
+ * on counter and CCRx values even when the trigger is ON. The minimum
+ * delay to activate CCx output when an active edge occurs on the
+ * trigger input is 5 clock cycles.
+ * @retval None
+ */
+#define __HAL_TIM_DISABLE_OCxFAST(__HANDLE__, __CHANNEL__) \
+ (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC1FE) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC2FE) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC3FE) :\
+ ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC4FE))
+
+/**
+ * @brief Set the Update Request Source (URS) bit of the TIMx_CR1 register.
+ * @param __HANDLE__ TIM handle.
+ * @note When the URS bit of the TIMx_CR1 register is set, only counter
+ * overflow/underflow generates an update interrupt or DMA request (if
+ * enabled)
+ * @retval None
+ */
+#define __HAL_TIM_URS_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1|= TIM_CR1_URS)
+
+/**
+ * @brief Reset the Update Request Source (URS) bit of the TIMx_CR1 register.
+ * @param __HANDLE__ TIM handle.
+ * @note When the URS bit of the TIMx_CR1 register is reset, any of the
+ * following events generate an update interrupt or DMA request (if
+ * enabled):
+ * _ Counter overflow underflow
+ * _ Setting the UG bit
+ * _ Update generation through the slave mode controller
+ * @retval None
+ */
+#define __HAL_TIM_URS_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1&=~TIM_CR1_URS)
+
+/**
+ * @brief Set the TIM Capture x input polarity on runtime.
+ * @param __HANDLE__ TIM handle.
+ * @param __CHANNEL__ TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @param __POLARITY__ Polarity for TIx source
+ * @arg TIM_INPUTCHANNELPOLARITY_RISING: Rising Edge
+ * @arg TIM_INPUTCHANNELPOLARITY_FALLING: Falling Edge
+ * @arg TIM_INPUTCHANNELPOLARITY_BOTHEDGE: Rising and Falling Edge
+ * @retval None
+ */
+#define __HAL_TIM_SET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__, __POLARITY__) \
+ do{ \
+ TIM_RESET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__)); \
+ TIM_SET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__), (__POLARITY__)); \
+ }while(0)
+
+/**
+ * @}
+ */
+/* End of exported macros ----------------------------------------------------*/
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup TIM_Private_Constants TIM Private Constants
+ * @{
+ */
+/* The counter of a timer instance is disabled only if all the CCx and CCxN
+ channels have been disabled */
+#define TIM_CCER_CCxE_MASK ((uint32_t)(TIM_CCER_CC1E | TIM_CCER_CC2E | TIM_CCER_CC3E | TIM_CCER_CC4E))
+#define TIM_CCER_CCxNE_MASK ((uint32_t)(TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE))
+/**
+ * @}
+ */
+/* End of private constants --------------------------------------------------*/
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup TIM_Private_Macros TIM Private Macros
+ * @{
+ */
+#define IS_TIM_CLEARINPUT_SOURCE(__MODE__) (((__MODE__) == TIM_CLEARINPUTSOURCE_NONE) || \
+ ((__MODE__) == TIM_CLEARINPUTSOURCE_ETR) || \
+ ((__MODE__) == TIM_CLEARINPUTSOURCE_OCREFCLR))
+
+#define IS_TIM_DMA_BASE(__BASE__) (((__BASE__) == TIM_DMABASE_CR1) || \
+ ((__BASE__) == TIM_DMABASE_CR2) || \
+ ((__BASE__) == TIM_DMABASE_SMCR) || \
+ ((__BASE__) == TIM_DMABASE_DIER) || \
+ ((__BASE__) == TIM_DMABASE_SR) || \
+ ((__BASE__) == TIM_DMABASE_EGR) || \
+ ((__BASE__) == TIM_DMABASE_CCMR1) || \
+ ((__BASE__) == TIM_DMABASE_CCMR2) || \
+ ((__BASE__) == TIM_DMABASE_CCER) || \
+ ((__BASE__) == TIM_DMABASE_CNT) || \
+ ((__BASE__) == TIM_DMABASE_PSC) || \
+ ((__BASE__) == TIM_DMABASE_ARR) || \
+ ((__BASE__) == TIM_DMABASE_RCR) || \
+ ((__BASE__) == TIM_DMABASE_CCR1) || \
+ ((__BASE__) == TIM_DMABASE_CCR2) || \
+ ((__BASE__) == TIM_DMABASE_CCR3) || \
+ ((__BASE__) == TIM_DMABASE_CCR4) || \
+ ((__BASE__) == TIM_DMABASE_BDTR))
+
+#define IS_TIM_EVENT_SOURCE(__SOURCE__) ((((__SOURCE__) & 0xFFFFFF00U) == 0x00000000U) && ((__SOURCE__) != 0x00000000U))
+
+#define IS_TIM_COUNTER_MODE(__MODE__) (((__MODE__) == TIM_COUNTERMODE_UP) || \
+ ((__MODE__) == TIM_COUNTERMODE_DOWN) || \
+ ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED1) || \
+ ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED2) || \
+ ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED3))
+
+#define IS_TIM_CLOCKDIVISION_DIV(__DIV__) (((__DIV__) == TIM_CLOCKDIVISION_DIV1) || \
+ ((__DIV__) == TIM_CLOCKDIVISION_DIV2) || \
+ ((__DIV__) == TIM_CLOCKDIVISION_DIV4))
+
+#define IS_TIM_AUTORELOAD_PRELOAD(PRELOAD) (((PRELOAD) == TIM_AUTORELOAD_PRELOAD_DISABLE) || \
+ ((PRELOAD) == TIM_AUTORELOAD_PRELOAD_ENABLE))
+
+#define IS_TIM_FAST_STATE(__STATE__) (((__STATE__) == TIM_OCFAST_DISABLE) || \
+ ((__STATE__) == TIM_OCFAST_ENABLE))
+
+#define IS_TIM_OC_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_OCPOLARITY_HIGH) || \
+ ((__POLARITY__) == TIM_OCPOLARITY_LOW))
+
+#define IS_TIM_OCN_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_OCNPOLARITY_HIGH) || \
+ ((__POLARITY__) == TIM_OCNPOLARITY_LOW))
+
+#define IS_TIM_OCIDLE_STATE(__STATE__) (((__STATE__) == TIM_OCIDLESTATE_SET) || \
+ ((__STATE__) == TIM_OCIDLESTATE_RESET))
+
+#define IS_TIM_OCNIDLE_STATE(__STATE__) (((__STATE__) == TIM_OCNIDLESTATE_SET) || \
+ ((__STATE__) == TIM_OCNIDLESTATE_RESET))
+
+#define IS_TIM_ENCODERINPUT_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_ENCODERINPUTPOLARITY_RISING) || \
+ ((__POLARITY__) == TIM_ENCODERINPUTPOLARITY_FALLING))
+
+#define IS_TIM_IC_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_ICPOLARITY_RISING) || \
+ ((__POLARITY__) == TIM_ICPOLARITY_FALLING) || \
+ ((__POLARITY__) == TIM_ICPOLARITY_BOTHEDGE))
+
+#define IS_TIM_IC_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_ICSELECTION_DIRECTTI) || \
+ ((__SELECTION__) == TIM_ICSELECTION_INDIRECTTI) || \
+ ((__SELECTION__) == TIM_ICSELECTION_TRC))
+
+#define IS_TIM_IC_PRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_ICPSC_DIV1) || \
+ ((__PRESCALER__) == TIM_ICPSC_DIV2) || \
+ ((__PRESCALER__) == TIM_ICPSC_DIV4) || \
+ ((__PRESCALER__) == TIM_ICPSC_DIV8))
+
+#define IS_TIM_OPM_MODE(__MODE__) (((__MODE__) == TIM_OPMODE_SINGLE) || \
+ ((__MODE__) == TIM_OPMODE_REPETITIVE))
+
+#define IS_TIM_ENCODER_MODE(__MODE__) (((__MODE__) == TIM_ENCODERMODE_TI1) || \
+ ((__MODE__) == TIM_ENCODERMODE_TI2) || \
+ ((__MODE__) == TIM_ENCODERMODE_TI12))
+
+#define IS_TIM_DMA_SOURCE(__SOURCE__) ((((__SOURCE__) & 0xFFFF80FFU) == 0x00000000U) && ((__SOURCE__) != 0x00000000U))
+
+#define IS_TIM_CHANNELS(__CHANNEL__) (((__CHANNEL__) == TIM_CHANNEL_1) || \
+ ((__CHANNEL__) == TIM_CHANNEL_2) || \
+ ((__CHANNEL__) == TIM_CHANNEL_3) || \
+ ((__CHANNEL__) == TIM_CHANNEL_4) || \
+ ((__CHANNEL__) == TIM_CHANNEL_ALL))
+
+#define IS_TIM_OPM_CHANNELS(__CHANNEL__) (((__CHANNEL__) == TIM_CHANNEL_1) || \
+ ((__CHANNEL__) == TIM_CHANNEL_2))
+
+#define IS_TIM_COMPLEMENTARY_CHANNELS(__CHANNEL__) (((__CHANNEL__) == TIM_CHANNEL_1) || \
+ ((__CHANNEL__) == TIM_CHANNEL_2) || \
+ ((__CHANNEL__) == TIM_CHANNEL_3))
+
+#define IS_TIM_CLOCKSOURCE(__CLOCK__) (((__CLOCK__) == TIM_CLOCKSOURCE_INTERNAL) || \
+ ((__CLOCK__) == TIM_CLOCKSOURCE_ETRMODE2) || \
+ ((__CLOCK__) == TIM_CLOCKSOURCE_ITR0) || \
+ ((__CLOCK__) == TIM_CLOCKSOURCE_ITR1) || \
+ ((__CLOCK__) == TIM_CLOCKSOURCE_ITR2) || \
+ ((__CLOCK__) == TIM_CLOCKSOURCE_ITR3) || \
+ ((__CLOCK__) == TIM_CLOCKSOURCE_TI1ED) || \
+ ((__CLOCK__) == TIM_CLOCKSOURCE_TI1) || \
+ ((__CLOCK__) == TIM_CLOCKSOURCE_TI2) || \
+ ((__CLOCK__) == TIM_CLOCKSOURCE_ETRMODE1))
+
+#define IS_TIM_CLOCKPOLARITY(__POLARITY__) (((__POLARITY__) == TIM_CLOCKPOLARITY_INVERTED) || \
+ ((__POLARITY__) == TIM_CLOCKPOLARITY_NONINVERTED) || \
+ ((__POLARITY__) == TIM_CLOCKPOLARITY_RISING) || \
+ ((__POLARITY__) == TIM_CLOCKPOLARITY_FALLING) || \
+ ((__POLARITY__) == TIM_CLOCKPOLARITY_BOTHEDGE))
+
+#define IS_TIM_CLOCKPRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV1) || \
+ ((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV2) || \
+ ((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV4) || \
+ ((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV8))
+
+#define IS_TIM_CLOCKFILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU)
+
+#define IS_TIM_CLEARINPUT_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_CLEARINPUTPOLARITY_INVERTED) || \
+ ((__POLARITY__) == TIM_CLEARINPUTPOLARITY_NONINVERTED))
+
+#define IS_TIM_CLEARINPUT_PRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV1) || \
+ ((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV2) || \
+ ((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV4) || \
+ ((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV8))
+
+#define IS_TIM_CLEARINPUT_FILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU)
+
+#define IS_TIM_OSSR_STATE(__STATE__) (((__STATE__) == TIM_OSSR_ENABLE) || \
+ ((__STATE__) == TIM_OSSR_DISABLE))
+
+#define IS_TIM_OSSI_STATE(__STATE__) (((__STATE__) == TIM_OSSI_ENABLE) || \
+ ((__STATE__) == TIM_OSSI_DISABLE))
+
+#define IS_TIM_LOCK_LEVEL(__LEVEL__) (((__LEVEL__) == TIM_LOCKLEVEL_OFF) || \
+ ((__LEVEL__) == TIM_LOCKLEVEL_1) || \
+ ((__LEVEL__) == TIM_LOCKLEVEL_2) || \
+ ((__LEVEL__) == TIM_LOCKLEVEL_3))
+
+#define IS_TIM_BREAK_FILTER(__BRKFILTER__) ((__BRKFILTER__) <= 0xFUL)
+
+
+#define IS_TIM_BREAK_STATE(__STATE__) (((__STATE__) == TIM_BREAK_ENABLE) || \
+ ((__STATE__) == TIM_BREAK_DISABLE))
+
+#define IS_TIM_BREAK_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_BREAKPOLARITY_LOW) || \
+ ((__POLARITY__) == TIM_BREAKPOLARITY_HIGH))
+
+#define IS_TIM_AUTOMATIC_OUTPUT_STATE(__STATE__) (((__STATE__) == TIM_AUTOMATICOUTPUT_ENABLE) || \
+ ((__STATE__) == TIM_AUTOMATICOUTPUT_DISABLE))
+
+#define IS_TIM_TRGO_SOURCE(__SOURCE__) (((__SOURCE__) == TIM_TRGO_RESET) || \
+ ((__SOURCE__) == TIM_TRGO_ENABLE) || \
+ ((__SOURCE__) == TIM_TRGO_UPDATE) || \
+ ((__SOURCE__) == TIM_TRGO_OC1) || \
+ ((__SOURCE__) == TIM_TRGO_OC1REF) || \
+ ((__SOURCE__) == TIM_TRGO_OC2REF) || \
+ ((__SOURCE__) == TIM_TRGO_OC3REF) || \
+ ((__SOURCE__) == TIM_TRGO_OC4REF))
+
+#define IS_TIM_MSM_STATE(__STATE__) (((__STATE__) == TIM_MASTERSLAVEMODE_ENABLE) || \
+ ((__STATE__) == TIM_MASTERSLAVEMODE_DISABLE))
+
+#define IS_TIM_SLAVE_MODE(__MODE__) (((__MODE__) == TIM_SLAVEMODE_DISABLE) || \
+ ((__MODE__) == TIM_SLAVEMODE_RESET) || \
+ ((__MODE__) == TIM_SLAVEMODE_GATED) || \
+ ((__MODE__) == TIM_SLAVEMODE_TRIGGER) || \
+ ((__MODE__) == TIM_SLAVEMODE_EXTERNAL1))
+
+#define IS_TIM_PWM_MODE(__MODE__) (((__MODE__) == TIM_OCMODE_PWM1) || \
+ ((__MODE__) == TIM_OCMODE_PWM2))
+
+#define IS_TIM_OC_MODE(__MODE__) (((__MODE__) == TIM_OCMODE_TIMING) || \
+ ((__MODE__) == TIM_OCMODE_ACTIVE) || \
+ ((__MODE__) == TIM_OCMODE_INACTIVE) || \
+ ((__MODE__) == TIM_OCMODE_TOGGLE) || \
+ ((__MODE__) == TIM_OCMODE_FORCED_ACTIVE) || \
+ ((__MODE__) == TIM_OCMODE_FORCED_INACTIVE))
+
+#define IS_TIM_TRIGGER_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_TS_ITR0) || \
+ ((__SELECTION__) == TIM_TS_ITR1) || \
+ ((__SELECTION__) == TIM_TS_ITR2) || \
+ ((__SELECTION__) == TIM_TS_ITR3) || \
+ ((__SELECTION__) == TIM_TS_TI1F_ED) || \
+ ((__SELECTION__) == TIM_TS_TI1FP1) || \
+ ((__SELECTION__) == TIM_TS_TI2FP2) || \
+ ((__SELECTION__) == TIM_TS_ETRF))
+
+#define IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_TS_ITR0) || \
+ ((__SELECTION__) == TIM_TS_ITR1) || \
+ ((__SELECTION__) == TIM_TS_ITR2) || \
+ ((__SELECTION__) == TIM_TS_ITR3) || \
+ ((__SELECTION__) == TIM_TS_NONE))
+
+#define IS_TIM_TRIGGERPOLARITY(__POLARITY__) (((__POLARITY__) == TIM_TRIGGERPOLARITY_INVERTED ) || \
+ ((__POLARITY__) == TIM_TRIGGERPOLARITY_NONINVERTED) || \
+ ((__POLARITY__) == TIM_TRIGGERPOLARITY_RISING ) || \
+ ((__POLARITY__) == TIM_TRIGGERPOLARITY_FALLING ) || \
+ ((__POLARITY__) == TIM_TRIGGERPOLARITY_BOTHEDGE ))
+
+#define IS_TIM_TRIGGERPRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV1) || \
+ ((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV2) || \
+ ((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV4) || \
+ ((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV8))
+
+#define IS_TIM_TRIGGERFILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU)
+
+#define IS_TIM_TI1SELECTION(__TI1SELECTION__) (((__TI1SELECTION__) == TIM_TI1SELECTION_CH1) || \
+ ((__TI1SELECTION__) == TIM_TI1SELECTION_XORCOMBINATION))
+
+#define IS_TIM_DMA_LENGTH(__LENGTH__) (((__LENGTH__) == TIM_DMABURSTLENGTH_1TRANSFER) || \
+ ((__LENGTH__) == TIM_DMABURSTLENGTH_2TRANSFERS) || \
+ ((__LENGTH__) == TIM_DMABURSTLENGTH_3TRANSFERS) || \
+ ((__LENGTH__) == TIM_DMABURSTLENGTH_4TRANSFERS) || \
+ ((__LENGTH__) == TIM_DMABURSTLENGTH_5TRANSFERS) || \
+ ((__LENGTH__) == TIM_DMABURSTLENGTH_6TRANSFERS) || \
+ ((__LENGTH__) == TIM_DMABURSTLENGTH_7TRANSFERS) || \
+ ((__LENGTH__) == TIM_DMABURSTLENGTH_8TRANSFERS) || \
+ ((__LENGTH__) == TIM_DMABURSTLENGTH_9TRANSFERS) || \
+ ((__LENGTH__) == TIM_DMABURSTLENGTH_10TRANSFERS) || \
+ ((__LENGTH__) == TIM_DMABURSTLENGTH_11TRANSFERS) || \
+ ((__LENGTH__) == TIM_DMABURSTLENGTH_12TRANSFERS) || \
+ ((__LENGTH__) == TIM_DMABURSTLENGTH_13TRANSFERS) || \
+ ((__LENGTH__) == TIM_DMABURSTLENGTH_14TRANSFERS) || \
+ ((__LENGTH__) == TIM_DMABURSTLENGTH_15TRANSFERS) || \
+ ((__LENGTH__) == TIM_DMABURSTLENGTH_16TRANSFERS) || \
+ ((__LENGTH__) == TIM_DMABURSTLENGTH_17TRANSFERS) || \
+ ((__LENGTH__) == TIM_DMABURSTLENGTH_18TRANSFERS))
+
+#define IS_TIM_DMA_DATA_LENGTH(LENGTH) (((LENGTH) >= 0x1U) && ((LENGTH) < 0x10000U))
+
+#define IS_TIM_IC_FILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU)
+
+#define IS_TIM_DEADTIME(__DEADTIME__) ((__DEADTIME__) <= 0xFFU)
+
+#define IS_TIM_SLAVEMODE_TRIGGER_ENABLED(__TRIGGER__) ((__TRIGGER__) == TIM_SLAVEMODE_TRIGGER)
+
+#define TIM_SET_ICPRESCALERVALUE(__HANDLE__, __CHANNEL__, __ICPSC__) \
+ (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= (__ICPSC__)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= ((__ICPSC__) << 8U)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= (__ICPSC__)) :\
+ ((__HANDLE__)->Instance->CCMR2 |= ((__ICPSC__) << 8U)))
+
+#define TIM_RESET_ICPRESCALERVALUE(__HANDLE__, __CHANNEL__) \
+ (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_IC3PSC) :\
+ ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_IC4PSC))
+
+#define TIM_SET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__, __POLARITY__) \
+ (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER |= (__POLARITY__)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER |= ((__POLARITY__) << 4U)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER |= ((__POLARITY__) << 8U)) :\
+ ((__HANDLE__)->Instance->CCER |= (((__POLARITY__) << 12U))))
+
+#define TIM_RESET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__) \
+ (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC3P | TIM_CCER_CC3NP)) :\
+ ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC4P | TIM_CCER_CC4NP)))
+
+/**
+ * @}
+ */
+/* End of private macros -----------------------------------------------------*/
+
+/* Include TIM HAL Extended module */
+#include "stm32f0xx_hal_tim_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup TIM_Exported_Functions TIM Exported Functions
+ * @{
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group1 TIM Time Base functions
+ * @brief Time Base functions
+ * @{
+ */
+/* Time Base functions ********************************************************/
+HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim);
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group2 TIM Output Compare functions
+ * @brief TIM Output Compare functions
+ * @{
+ */
+/* Timer Output Compare functions *********************************************/
+HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group3 TIM PWM functions
+ * @brief TIM PWM functions
+ * @{
+ */
+/* Timer PWM functions ********************************************************/
+HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group4 TIM Input Capture functions
+ * @brief TIM Input Capture functions
+ * @{
+ */
+/* Timer Input Capture functions **********************************************/
+HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_IC_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_IC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group5 TIM One Pulse functions
+ * @brief TIM One Pulse functions
+ * @{
+ */
+/* Timer One Pulse functions **************************************************/
+HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePulseMode);
+HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group6 TIM Encoder functions
+ * @brief TIM Encoder functions
+ * @{
+ */
+/* Timer Encoder functions ****************************************************/
+HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, TIM_Encoder_InitTypeDef *sConfig);
+HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1,
+ uint32_t *pData2, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group7 TIM IRQ handler management
+ * @brief IRQ handler management
+ * @{
+ */
+/* Interrupt Handler functions ***********************************************/
+void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim);
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Functions_Group8 TIM Peripheral Control functions
+ * @brief Peripheral Control functions
+ * @{
+ */
+/* Control functions *********************************************************/
+HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef *sConfig, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef *sConfig, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_IC_InitTypeDef *sConfig, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef *sConfig,
+ uint32_t OutputChannel, uint32_t InputChannel);
+HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, TIM_ClearInputConfigTypeDef *sClearInputConfig,
+ uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, TIM_ClockConfigTypeDef *sClockSourceConfig);
+HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection);
+HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef *sSlaveConfig);
+HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro_IT(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef *sSlaveConfig);
+HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress,
+ uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength);
+HAL_StatusTypeDef HAL_TIM_DMABurst_MultiWriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress,
+ uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength,
+ uint32_t DataLength);
+HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc);
+HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress,
+ uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength);
+HAL_StatusTypeDef HAL_TIM_DMABurst_MultiReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress,
+ uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength,
+ uint32_t DataLength);
+HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc);
+HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource);
+uint32_t HAL_TIM_ReadCapturedValue(TIM_HandleTypeDef *htim, uint32_t Channel);
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Functions_Group9 TIM Callbacks functions
+ * @brief TIM Callbacks functions
+ * @{
+ */
+/* Callback in non blocking modes (Interrupt and DMA) *************************/
+void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_PeriodElapsedHalfCpltCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_IC_CaptureHalfCpltCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_PWM_PulseFinishedHalfCpltCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_TriggerHalfCpltCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim);
+
+/* Callbacks Register/UnRegister functions ***********************************/
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+HAL_StatusTypeDef HAL_TIM_RegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID,
+ pTIM_CallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_TIM_UnRegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Functions_Group10 TIM Peripheral State functions
+ * @brief Peripheral State functions
+ * @{
+ */
+/* Peripheral State functions ************************************************/
+HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(TIM_HandleTypeDef *htim);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* End of exported functions -------------------------------------------------*/
+
+/* Private functions----------------------------------------------------------*/
+/** @defgroup TIM_Private_Functions TIM Private Functions
+ * @{
+ */
+void TIM_Base_SetConfig(TIM_TypeDef *TIMx, TIM_Base_InitTypeDef *Structure);
+void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, uint32_t TIM_ICFilter);
+void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
+void TIM_ETR_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ExtTRGPrescaler,
+ uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter);
+
+void TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma);
+void TIM_DMADelayPulseHalfCplt(DMA_HandleTypeDef *hdma);
+void TIM_DMAError(DMA_HandleTypeDef *hdma);
+void TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma);
+void TIM_DMACaptureHalfCplt(DMA_HandleTypeDef *hdma);
+void TIM_CCxChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelState);
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+void TIM_ResetCallback(TIM_HandleTypeDef *htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+
+/**
+ * @}
+ */
+/* End of private functions --------------------------------------------------*/
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32F0xx_HAL_TIM_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_tim_ex.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_tim_ex.h
new file mode 100644
index 0000000..0c39c2e
--- /dev/null
+++ b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_tim_ex.h
@@ -0,0 +1,267 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_tim_ex.h
+ * @author MCD Application Team
+ * @brief Header file of TIM HAL Extended module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32F0xx_HAL_TIM_EX_H
+#define STM32F0xx_HAL_TIM_EX_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup TIMEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup TIMEx_Exported_Types TIM Extended Exported Types
+ * @{
+ */
+
+/**
+ * @brief TIM Hall sensor Configuration Structure definition
+ */
+
+typedef struct
+{
+ uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+ uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler.
+ This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+ uint32_t IC1Filter; /*!< Specifies the input capture filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+
+ uint32_t Commutation_Delay; /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
+ This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+} TIM_HallSensor_InitTypeDef;
+/**
+ * @}
+ */
+/* End of exported types -----------------------------------------------------*/
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup TIMEx_Exported_Constants TIM Extended Exported Constants
+ * @{
+ */
+
+/** @defgroup TIMEx_Remap TIM Extended Remapping
+ * @{
+ */
+#define TIM_TIM14_GPIO (0x00000000U) /*!< TIM14 TI1 is connected to GPIO */
+#define TIM_TIM14_RTC (0x00000001U) /*!< TIM14 TI1 is connected to RTC_clock */
+#define TIM_TIM14_HSE (0x00000002U) /*!< TIM14 TI1 is connected to HSE/32U */
+#define TIM_TIM14_MCO (0x00000003U) /*!< TIM14 TI1 is connected to MCO */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* End of exported constants -------------------------------------------------*/
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup TIMEx_Exported_Macros TIM Extended Exported Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+/* End of exported macro -----------------------------------------------------*/
+
+/* Private macro -------------------------------------------------------------*/
+/** @defgroup TIMEx_Private_Macros TIM Extended Private Macros
+ * @{
+ */
+#define IS_TIM_REMAP(__INSTANCE__, __REMAP__) \
+ (((__INSTANCE__) == TIM14) && (((__REMAP__) & 0xFFFFFFFCU) == 0x00000000U))
+
+/**
+ * @}
+ */
+/* End of private macro ------------------------------------------------------*/
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup TIMEx_Exported_Functions TIM Extended Exported Functions
+ * @{
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group1 Extended Timer Hall Sensor functions
+ * @brief Timer Hall Sensor functions
+ * @{
+ */
+/* Timer Hall Sensor functions **********************************************/
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, TIM_HallSensor_InitTypeDef *sConfig);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim);
+
+void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim);
+
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim);
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group2 Extended Timer Complementary Output Compare functions
+ * @brief Timer Complementary Output Compare functions
+ * @{
+ */
+/* Timer Complementary Output Compare functions *****************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group3 Extended Timer Complementary PWM functions
+ * @brief Timer Complementary PWM functions
+ * @{
+ */
+/* Timer Complementary PWM functions ****************************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group4 Extended Timer Complementary One Pulse functions
+ * @brief Timer Complementary One Pulse functions
+ * @{
+ */
+/* Timer Complementary One Pulse functions **********************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group5 Extended Peripheral Control functions
+ * @brief Peripheral Control functions
+ * @{
+ */
+/* Extended Control functions ************************************************/
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent(TIM_HandleTypeDef *htim, uint32_t InputTrigger,
+ uint32_t CommutationSource);
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_IT(TIM_HandleTypeDef *htim, uint32_t InputTrigger,
+ uint32_t CommutationSource);
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_DMA(TIM_HandleTypeDef *htim, uint32_t InputTrigger,
+ uint32_t CommutationSource);
+HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim,
+ TIM_MasterConfigTypeDef *sMasterConfig);
+HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim,
+ TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig);
+HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap);
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group6 Extended Callbacks functions
+ * @brief Extended Callbacks functions
+ * @{
+ */
+/* Extended Callback **********************************************************/
+void HAL_TIMEx_CommutCallback(TIM_HandleTypeDef *htim);
+void HAL_TIMEx_CommutHalfCpltCallback(TIM_HandleTypeDef *htim);
+void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim);
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group7 Extended Peripheral State functions
+ * @brief Extended Peripheral State functions
+ * @{
+ */
+/* Extended Peripheral State functions ***************************************/
+HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef *htim);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* End of exported functions -------------------------------------------------*/
+
+/* Private functions----------------------------------------------------------*/
+/** @addtogroup TIMEx_Private_Functions TIMEx Private Functions
+ * @{
+ */
+void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma);
+void TIMEx_DMACommutationHalfCplt(DMA_HandleTypeDef *hdma);
+/**
+ * @}
+ */
+/* End of private functions --------------------------------------------------*/
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* STM32F0xx_HAL_TIM_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_tsc.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_tsc.h
new file mode 100644
index 0000000..d9f2686
--- /dev/null
+++ b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_tsc.h
@@ -0,0 +1,780 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_tsc.h
+ * @author MCD Application Team
+ * @brief Header file of TSC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32F0xx_HAL_TSC_H
+#define STM32F0xx_HAL_TSC_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+#if defined(TSC)
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup TSC
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup TSC_Exported_Types TSC Exported Types
+ * @{
+ */
+
+/**
+ * @brief TSC state structure definition
+ */
+typedef enum
+{
+ HAL_TSC_STATE_RESET = 0x00UL, /*!< TSC registers have their reset value */
+ HAL_TSC_STATE_READY = 0x01UL, /*!< TSC registers are initialized or acquisition is completed with success */
+ HAL_TSC_STATE_BUSY = 0x02UL, /*!< TSC initialization or acquisition is on-going */
+ HAL_TSC_STATE_ERROR = 0x03UL /*!< Acquisition is completed with max count error */
+} HAL_TSC_StateTypeDef;
+
+/**
+ * @brief TSC group status structure definition
+ */
+typedef enum
+{
+ TSC_GROUP_ONGOING = 0x00UL, /*!< Acquisition on group is on-going or not started */
+ TSC_GROUP_COMPLETED = 0x01UL /*!< Acquisition on group is completed with success (no max count error) */
+} TSC_GroupStatusTypeDef;
+
+/**
+ * @brief TSC init structure definition
+ */
+typedef struct
+{
+ uint32_t CTPulseHighLength; /*!< Charge-transfer high pulse length
+ This parameter can be a value of @ref TSC_CTPulseHL_Config */
+ uint32_t CTPulseLowLength; /*!< Charge-transfer low pulse length
+ This parameter can be a value of @ref TSC_CTPulseLL_Config */
+ FunctionalState SpreadSpectrum; /*!< Spread spectrum activation
+ This parameter can be set to ENABLE or DISABLE. */
+ uint32_t SpreadSpectrumDeviation; /*!< Spread spectrum deviation
+ This parameter must be a number between Min_Data = 0 and Max_Data = 127 */
+ uint32_t SpreadSpectrumPrescaler; /*!< Spread spectrum prescaler
+ This parameter can be a value of @ref TSC_SpreadSpec_Prescaler */
+ uint32_t PulseGeneratorPrescaler; /*!< Pulse generator prescaler
+ This parameter can be a value of @ref TSC_PulseGenerator_Prescaler */
+ uint32_t MaxCountValue; /*!< Max count value
+ This parameter can be a value of @ref TSC_MaxCount_Value */
+ uint32_t IODefaultMode; /*!< IO default mode
+ This parameter can be a value of @ref TSC_IO_Default_Mode */
+ uint32_t SynchroPinPolarity; /*!< Synchro pin polarity
+ This parameter can be a value of @ref TSC_Synchro_Pin_Polarity */
+ uint32_t AcquisitionMode; /*!< Acquisition mode
+ This parameter can be a value of @ref TSC_Acquisition_Mode */
+ FunctionalState MaxCountInterrupt;/*!< Max count interrupt activation
+ This parameter can be set to ENABLE or DISABLE. */
+ uint32_t ChannelIOs; /*!< Channel IOs mask */
+ uint32_t ShieldIOs; /*!< Shield IOs mask */
+ uint32_t SamplingIOs; /*!< Sampling IOs mask */
+} TSC_InitTypeDef;
+
+/**
+ * @brief TSC IOs configuration structure definition
+ */
+typedef struct
+{
+ uint32_t ChannelIOs; /*!< Channel IOs mask */
+ uint32_t ShieldIOs; /*!< Shield IOs mask */
+ uint32_t SamplingIOs; /*!< Sampling IOs mask */
+} TSC_IOConfigTypeDef;
+
+/**
+ * @brief TSC handle Structure definition
+ */
+#if (USE_HAL_TSC_REGISTER_CALLBACKS == 1)
+typedef struct __TSC_HandleTypeDef
+#else
+typedef struct
+#endif /* USE_HAL_TSC_REGISTER_CALLBACKS */
+{
+ TSC_TypeDef *Instance; /*!< Register base address */
+ TSC_InitTypeDef Init; /*!< Initialization parameters */
+ __IO HAL_TSC_StateTypeDef State; /*!< Peripheral state */
+ HAL_LockTypeDef Lock; /*!< Lock feature */
+ __IO uint32_t ErrorCode; /*!< TSC Error code */
+
+#if (USE_HAL_TSC_REGISTER_CALLBACKS == 1)
+ void (* ConvCpltCallback)(struct __TSC_HandleTypeDef *htsc); /*!< TSC Conversion complete callback */
+ void (* ErrorCallback)(struct __TSC_HandleTypeDef *htsc); /*!< TSC Error callback */
+
+ void (* MspInitCallback)(struct __TSC_HandleTypeDef *htsc); /*!< TSC Msp Init callback */
+ void (* MspDeInitCallback)(struct __TSC_HandleTypeDef *htsc); /*!< TSC Msp DeInit callback */
+
+#endif /* USE_HAL_TSC_REGISTER_CALLBACKS */
+} TSC_HandleTypeDef;
+
+enum
+{
+ TSC_GROUP1_IDX = 0x00UL,
+ TSC_GROUP2_IDX,
+ TSC_GROUP3_IDX,
+ TSC_GROUP4_IDX,
+ TSC_GROUP5_IDX,
+ TSC_GROUP6_IDX,
+ TSC_GROUP7_IDX,
+ TSC_GROUP8_IDX,
+ TSC_NB_OF_GROUPS
+};
+
+#if (USE_HAL_TSC_REGISTER_CALLBACKS == 1)
+/**
+ * @brief HAL TSC Callback ID enumeration definition
+ */
+typedef enum
+{
+ HAL_TSC_CONV_COMPLETE_CB_ID = 0x00UL, /*!< TSC Conversion completed callback ID */
+ HAL_TSC_ERROR_CB_ID = 0x01UL, /*!< TSC Error callback ID */
+
+ HAL_TSC_MSPINIT_CB_ID = 0x02UL, /*!< TSC Msp Init callback ID */
+ HAL_TSC_MSPDEINIT_CB_ID = 0x03UL /*!< TSC Msp DeInit callback ID */
+
+} HAL_TSC_CallbackIDTypeDef;
+
+/**
+ * @brief HAL TSC Callback pointer definition
+ */
+typedef void (*pTSC_CallbackTypeDef)(TSC_HandleTypeDef *htsc); /*!< pointer to an TSC callback function */
+
+#endif /* USE_HAL_TSC_REGISTER_CALLBACKS */
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup TSC_Exported_Constants TSC Exported Constants
+ * @{
+ */
+
+/** @defgroup TSC_Error_Code_definition TSC Error Code definition
+ * @brief TSC Error Code definition
+ * @{
+ */
+#define HAL_TSC_ERROR_NONE 0x00000000UL /*!< No error */
+#if (USE_HAL_TSC_REGISTER_CALLBACKS == 1)
+#define HAL_TSC_ERROR_INVALID_CALLBACK 0x00000001UL /*!< Invalid Callback error */
+#endif /* USE_HAL_TSC_REGISTER_CALLBACKS */
+/**
+ * @}
+ */
+
+/** @defgroup TSC_CTPulseHL_Config CTPulse High Length
+ * @{
+ */
+#define TSC_CTPH_1CYCLE 0x00000000UL /*!< Charge transfer pulse high during 1 cycle (PGCLK) */
+#define TSC_CTPH_2CYCLES TSC_CR_CTPH_0 /*!< Charge transfer pulse high during 2 cycles (PGCLK) */
+#define TSC_CTPH_3CYCLES TSC_CR_CTPH_1 /*!< Charge transfer pulse high during 3 cycles (PGCLK) */
+#define TSC_CTPH_4CYCLES (TSC_CR_CTPH_1 | TSC_CR_CTPH_0) /*!< Charge transfer pulse high during 4 cycles (PGCLK) */
+#define TSC_CTPH_5CYCLES TSC_CR_CTPH_2 /*!< Charge transfer pulse high during 5 cycles (PGCLK) */
+#define TSC_CTPH_6CYCLES (TSC_CR_CTPH_2 | TSC_CR_CTPH_0) /*!< Charge transfer pulse high during 6 cycles (PGCLK) */
+#define TSC_CTPH_7CYCLES (TSC_CR_CTPH_2 | TSC_CR_CTPH_1) /*!< Charge transfer pulse high during 7 cycles (PGCLK) */
+#define TSC_CTPH_8CYCLES (TSC_CR_CTPH_2 | TSC_CR_CTPH_1 | TSC_CR_CTPH_0) /*!< Charge transfer pulse high during 8 cycles (PGCLK) */
+#define TSC_CTPH_9CYCLES TSC_CR_CTPH_3 /*!< Charge transfer pulse high during 9 cycles (PGCLK) */
+#define TSC_CTPH_10CYCLES (TSC_CR_CTPH_3 | TSC_CR_CTPH_0) /*!< Charge transfer pulse high during 10 cycles (PGCLK) */
+#define TSC_CTPH_11CYCLES (TSC_CR_CTPH_3 | TSC_CR_CTPH_1) /*!< Charge transfer pulse high during 11 cycles (PGCLK) */
+#define TSC_CTPH_12CYCLES (TSC_CR_CTPH_3 | TSC_CR_CTPH_1 | TSC_CR_CTPH_0) /*!< Charge transfer pulse high during 12 cycles (PGCLK) */
+#define TSC_CTPH_13CYCLES (TSC_CR_CTPH_3 | TSC_CR_CTPH_2) /*!< Charge transfer pulse high during 13 cycles (PGCLK) */
+#define TSC_CTPH_14CYCLES (TSC_CR_CTPH_3 | TSC_CR_CTPH_2 | TSC_CR_CTPH_0) /*!< Charge transfer pulse high during 14 cycles (PGCLK) */
+#define TSC_CTPH_15CYCLES (TSC_CR_CTPH_3 | TSC_CR_CTPH_2 | TSC_CR_CTPH_1) /*!< Charge transfer pulse high during 15 cycles (PGCLK) */
+#define TSC_CTPH_16CYCLES (TSC_CR_CTPH_3 | TSC_CR_CTPH_2 | TSC_CR_CTPH_1 | TSC_CR_CTPH_0) /*!< Charge transfer pulse high during 16 cycles (PGCLK) */
+/**
+ * @}
+ */
+
+/** @defgroup TSC_CTPulseLL_Config CTPulse Low Length
+ * @{
+ */
+#define TSC_CTPL_1CYCLE 0x00000000UL /*!< Charge transfer pulse low during 1 cycle (PGCLK) */
+#define TSC_CTPL_2CYCLES TSC_CR_CTPL_0 /*!< Charge transfer pulse low during 2 cycles (PGCLK) */
+#define TSC_CTPL_3CYCLES TSC_CR_CTPL_1 /*!< Charge transfer pulse low during 3 cycles (PGCLK) */
+#define TSC_CTPL_4CYCLES (TSC_CR_CTPL_1 | TSC_CR_CTPL_0) /*!< Charge transfer pulse low during 4 cycles (PGCLK) */
+#define TSC_CTPL_5CYCLES TSC_CR_CTPL_2 /*!< Charge transfer pulse low during 5 cycles (PGCLK) */
+#define TSC_CTPL_6CYCLES (TSC_CR_CTPL_2 | TSC_CR_CTPL_0) /*!< Charge transfer pulse low during 6 cycles (PGCLK) */
+#define TSC_CTPL_7CYCLES (TSC_CR_CTPL_2 | TSC_CR_CTPL_1) /*!< Charge transfer pulse low during 7 cycles (PGCLK) */
+#define TSC_CTPL_8CYCLES (TSC_CR_CTPL_2 | TSC_CR_CTPL_1 | TSC_CR_CTPL_0) /*!< Charge transfer pulse low during 8 cycles (PGCLK) */
+#define TSC_CTPL_9CYCLES TSC_CR_CTPL_3 /*!< Charge transfer pulse low during 9 cycles (PGCLK) */
+#define TSC_CTPL_10CYCLES (TSC_CR_CTPL_3 | TSC_CR_CTPL_0) /*!< Charge transfer pulse low during 10 cycles (PGCLK) */
+#define TSC_CTPL_11CYCLES (TSC_CR_CTPL_3 | TSC_CR_CTPL_1) /*!< Charge transfer pulse low during 11 cycles (PGCLK) */
+#define TSC_CTPL_12CYCLES (TSC_CR_CTPL_3 | TSC_CR_CTPL_1 | TSC_CR_CTPL_0) /*!< Charge transfer pulse low during 12 cycles (PGCLK) */
+#define TSC_CTPL_13CYCLES (TSC_CR_CTPL_3 | TSC_CR_CTPL_2) /*!< Charge transfer pulse low during 13 cycles (PGCLK) */
+#define TSC_CTPL_14CYCLES (TSC_CR_CTPL_3 | TSC_CR_CTPL_2 | TSC_CR_CTPL_0) /*!< Charge transfer pulse low during 14 cycles (PGCLK) */
+#define TSC_CTPL_15CYCLES (TSC_CR_CTPL_3 | TSC_CR_CTPL_2 | TSC_CR_CTPL_1) /*!< Charge transfer pulse low during 15 cycles (PGCLK) */
+#define TSC_CTPL_16CYCLES (TSC_CR_CTPL_3 | TSC_CR_CTPL_2 | TSC_CR_CTPL_1 | TSC_CR_CTPL_0) /*!< Charge transfer pulse low during 16 cycles (PGCLK) */
+/**
+ * @}
+ */
+
+/** @defgroup TSC_SpreadSpec_Prescaler Spread Spectrum Prescaler
+ * @{
+ */
+#define TSC_SS_PRESC_DIV1 0x00000000UL /*!< Spread Spectrum Prescaler Div1 */
+#define TSC_SS_PRESC_DIV2 TSC_CR_SSPSC /*!< Spread Spectrum Prescaler Div2 */
+/**
+ * @}
+ */
+
+/** @defgroup TSC_PulseGenerator_Prescaler Pulse Generator Prescaler
+ * @{
+ */
+#define TSC_PG_PRESC_DIV1 0x00000000UL /*!< Pulse Generator HCLK Div1 */
+#define TSC_PG_PRESC_DIV2 TSC_CR_PGPSC_0 /*!< Pulse Generator HCLK Div2 */
+#define TSC_PG_PRESC_DIV4 TSC_CR_PGPSC_1 /*!< Pulse Generator HCLK Div4 */
+#define TSC_PG_PRESC_DIV8 (TSC_CR_PGPSC_1 | TSC_CR_PGPSC_0) /*!< Pulse Generator HCLK Div8 */
+#define TSC_PG_PRESC_DIV16 TSC_CR_PGPSC_2 /*!< Pulse Generator HCLK Div16 */
+#define TSC_PG_PRESC_DIV32 (TSC_CR_PGPSC_2 | TSC_CR_PGPSC_0) /*!< Pulse Generator HCLK Div32 */
+#define TSC_PG_PRESC_DIV64 (TSC_CR_PGPSC_2 | TSC_CR_PGPSC_1) /*!< Pulse Generator HCLK Div64 */
+#define TSC_PG_PRESC_DIV128 (TSC_CR_PGPSC_2 | TSC_CR_PGPSC_1 | TSC_CR_PGPSC_0) /*!< Pulse Generator HCLK Div128 */
+/**
+ * @}
+ */
+
+/** @defgroup TSC_MaxCount_Value Max Count Value
+ * @{
+ */
+#define TSC_MCV_255 0x00000000UL /*!< 255 maximum number of charge transfer pulses */
+#define TSC_MCV_511 TSC_CR_MCV_0 /*!< 511 maximum number of charge transfer pulses */
+#define TSC_MCV_1023 TSC_CR_MCV_1 /*!< 1023 maximum number of charge transfer pulses */
+#define TSC_MCV_2047 (TSC_CR_MCV_1 | TSC_CR_MCV_0) /*!< 2047 maximum number of charge transfer pulses */
+#define TSC_MCV_4095 TSC_CR_MCV_2 /*!< 4095 maximum number of charge transfer pulses */
+#define TSC_MCV_8191 (TSC_CR_MCV_2 | TSC_CR_MCV_0) /*!< 8191 maximum number of charge transfer pulses */
+#define TSC_MCV_16383 (TSC_CR_MCV_2 | TSC_CR_MCV_1) /*!< 16383 maximum number of charge transfer pulses */
+/**
+ * @}
+ */
+
+/** @defgroup TSC_IO_Default_Mode IO Default Mode
+ * @{
+ */
+#define TSC_IODEF_OUT_PP_LOW 0x00000000UL /*!< I/Os are forced to output push-pull low */
+#define TSC_IODEF_IN_FLOAT TSC_CR_IODEF /*!< I/Os are in input floating */
+/**
+ * @}
+ */
+
+/** @defgroup TSC_Synchro_Pin_Polarity Synchro Pin Polarity
+ * @{
+ */
+#define TSC_SYNC_POLARITY_FALLING 0x00000000UL /*!< Falling edge only */
+#define TSC_SYNC_POLARITY_RISING TSC_CR_SYNCPOL /*!< Rising edge and high level */
+/**
+ * @}
+ */
+
+/** @defgroup TSC_Acquisition_Mode Acquisition Mode
+ * @{
+ */
+#define TSC_ACQ_MODE_NORMAL 0x00000000UL /*!< Normal acquisition mode (acquisition starts as soon as START bit is set) */
+#define TSC_ACQ_MODE_SYNCHRO TSC_CR_AM /*!< Synchronized acquisition mode (acquisition starts if START bit is set and when the selected signal is detected on the SYNC input pin) */
+/**
+ * @}
+ */
+
+/** @defgroup TSC_interrupts_definition Interrupts definition
+ * @{
+ */
+#define TSC_IT_EOA TSC_IER_EOAIE /*!< End of acquisition interrupt enable */
+#define TSC_IT_MCE TSC_IER_MCEIE /*!< Max count error interrupt enable */
+/**
+ * @}
+ */
+
+/** @defgroup TSC_flags_definition Flags definition
+ * @{
+ */
+#define TSC_FLAG_EOA TSC_ISR_EOAF /*!< End of acquisition flag */
+#define TSC_FLAG_MCE TSC_ISR_MCEF /*!< Max count error flag */
+/**
+ * @}
+ */
+
+/** @defgroup TSC_Group_definition Group definition
+ * @{
+ */
+#define TSC_GROUP1 (0x1UL << TSC_GROUP1_IDX)
+#define TSC_GROUP2 (0x1UL << TSC_GROUP2_IDX)
+#define TSC_GROUP3 (0x1UL << TSC_GROUP3_IDX)
+#define TSC_GROUP4 (0x1UL << TSC_GROUP4_IDX)
+#define TSC_GROUP5 (0x1UL << TSC_GROUP5_IDX)
+#define TSC_GROUP6 (0x1UL << TSC_GROUP6_IDX)
+#define TSC_GROUP7 (0x1UL << TSC_GROUP7_IDX)
+#define TSC_GROUP8 (0x1UL << TSC_GROUP8_IDX)
+
+#define TSC_GROUP1_IO1 TSC_IOCCR_G1_IO1 /*!< TSC Group1 IO1 */
+#define TSC_GROUP1_IO2 TSC_IOCCR_G1_IO2 /*!< TSC Group1 IO2 */
+#define TSC_GROUP1_IO3 TSC_IOCCR_G1_IO3 /*!< TSC Group1 IO3 */
+#define TSC_GROUP1_IO4 TSC_IOCCR_G1_IO4 /*!< TSC Group1 IO4 */
+
+#define TSC_GROUP2_IO1 TSC_IOCCR_G2_IO1 /*!< TSC Group2 IO1 */
+#define TSC_GROUP2_IO2 TSC_IOCCR_G2_IO2 /*!< TSC Group2 IO2 */
+#define TSC_GROUP2_IO3 TSC_IOCCR_G2_IO3 /*!< TSC Group2 IO3 */
+#define TSC_GROUP2_IO4 TSC_IOCCR_G2_IO4 /*!< TSC Group2 IO4 */
+
+#define TSC_GROUP3_IO1 TSC_IOCCR_G3_IO1 /*!< TSC Group3 IO1 */
+#define TSC_GROUP3_IO2 TSC_IOCCR_G3_IO2 /*!< TSC Group3 IO2 */
+#define TSC_GROUP3_IO3 TSC_IOCCR_G3_IO3 /*!< TSC Group3 IO3 */
+#define TSC_GROUP3_IO4 TSC_IOCCR_G3_IO4 /*!< TSC Group3 IO4 */
+
+#define TSC_GROUP4_IO1 TSC_IOCCR_G4_IO1 /*!< TSC Group4 IO1 */
+#define TSC_GROUP4_IO2 TSC_IOCCR_G4_IO2 /*!< TSC Group4 IO2 */
+#define TSC_GROUP4_IO3 TSC_IOCCR_G4_IO3 /*!< TSC Group4 IO3 */
+#define TSC_GROUP4_IO4 TSC_IOCCR_G4_IO4 /*!< TSC Group4 IO4 */
+
+#define TSC_GROUP5_IO1 TSC_IOCCR_G5_IO1 /*!< TSC Group5 IO1 */
+#define TSC_GROUP5_IO2 TSC_IOCCR_G5_IO2 /*!< TSC Group5 IO2 */
+#define TSC_GROUP5_IO3 TSC_IOCCR_G5_IO3 /*!< TSC Group5 IO3 */
+#define TSC_GROUP5_IO4 TSC_IOCCR_G5_IO4 /*!< TSC Group5 IO4 */
+
+#define TSC_GROUP6_IO1 TSC_IOCCR_G6_IO1 /*!< TSC Group6 IO1 */
+#define TSC_GROUP6_IO2 TSC_IOCCR_G6_IO2 /*!< TSC Group6 IO2 */
+#define TSC_GROUP6_IO3 TSC_IOCCR_G6_IO3 /*!< TSC Group6 IO3 */
+#define TSC_GROUP6_IO4 TSC_IOCCR_G6_IO4 /*!< TSC Group6 IO4 */
+
+#define TSC_GROUP7_IO1 TSC_IOCCR_G7_IO1 /*!< TSC Group7 IO1 */
+#define TSC_GROUP7_IO2 TSC_IOCCR_G7_IO2 /*!< TSC Group7 IO2 */
+#define TSC_GROUP7_IO3 TSC_IOCCR_G7_IO3 /*!< TSC Group7 IO3 */
+#define TSC_GROUP7_IO4 TSC_IOCCR_G7_IO4 /*!< TSC Group7 IO4 */
+
+#define TSC_GROUP8_IO1 TSC_IOCCR_G8_IO1 /*!< TSC Group8 IO1 */
+#define TSC_GROUP8_IO2 TSC_IOCCR_G8_IO2 /*!< TSC Group8 IO2 */
+#define TSC_GROUP8_IO3 TSC_IOCCR_G8_IO3 /*!< TSC Group8 IO3 */
+#define TSC_GROUP8_IO4 TSC_IOCCR_G8_IO4 /*!< TSC Group8 IO4 */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+
+/** @defgroup TSC_Exported_Macros TSC Exported Macros
+ * @{
+ */
+
+/** @brief Reset TSC handle state.
+ * @param __HANDLE__ TSC handle
+ * @retval None
+ */
+#if (USE_HAL_TSC_REGISTER_CALLBACKS == 1)
+#define __HAL_TSC_RESET_HANDLE_STATE(__HANDLE__) do{ \
+ (__HANDLE__)->State = HAL_TSC_STATE_RESET; \
+ (__HANDLE__)->MspInitCallback = NULL; \
+ (__HANDLE__)->MspDeInitCallback = NULL; \
+ } while(0)
+#else
+#define __HAL_TSC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_TSC_STATE_RESET)
+#endif
+
+/**
+ * @brief Enable the TSC peripheral.
+ * @param __HANDLE__ TSC handle
+ * @retval None
+ */
+#define __HAL_TSC_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= TSC_CR_TSCE)
+
+/**
+ * @brief Disable the TSC peripheral.
+ * @param __HANDLE__ TSC handle
+ * @retval None
+ */
+#define __HAL_TSC_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= (~TSC_CR_TSCE))
+
+/**
+ * @brief Start acquisition.
+ * @param __HANDLE__ TSC handle
+ * @retval None
+ */
+#define __HAL_TSC_START_ACQ(__HANDLE__) ((__HANDLE__)->Instance->CR |= TSC_CR_START)
+
+/**
+ * @brief Stop acquisition.
+ * @param __HANDLE__ TSC handle
+ * @retval None
+ */
+#define __HAL_TSC_STOP_ACQ(__HANDLE__) ((__HANDLE__)->Instance->CR &= (~TSC_CR_START))
+
+/**
+ * @brief Set IO default mode to output push-pull low.
+ * @param __HANDLE__ TSC handle
+ * @retval None
+ */
+#define __HAL_TSC_SET_IODEF_OUTPPLOW(__HANDLE__) ((__HANDLE__)->Instance->CR &= (~TSC_CR_IODEF))
+
+/**
+ * @brief Set IO default mode to input floating.
+ * @param __HANDLE__ TSC handle
+ * @retval None
+ */
+#define __HAL_TSC_SET_IODEF_INFLOAT(__HANDLE__) ((__HANDLE__)->Instance->CR |= TSC_CR_IODEF)
+
+/**
+ * @brief Set synchronization polarity to falling edge.
+ * @param __HANDLE__ TSC handle
+ * @retval None
+ */
+#define __HAL_TSC_SET_SYNC_POL_FALL(__HANDLE__) ((__HANDLE__)->Instance->CR &= (~TSC_CR_SYNCPOL))
+
+/**
+ * @brief Set synchronization polarity to rising edge and high level.
+ * @param __HANDLE__ TSC handle
+ * @retval None
+ */
+#define __HAL_TSC_SET_SYNC_POL_RISE_HIGH(__HANDLE__) ((__HANDLE__)->Instance->CR |= TSC_CR_SYNCPOL)
+
+/**
+ * @brief Enable TSC interrupt.
+ * @param __HANDLE__ TSC handle
+ * @param __INTERRUPT__ TSC interrupt
+ * @retval None
+ */
+#define __HAL_TSC_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER |= (__INTERRUPT__))
+
+/**
+ * @brief Disable TSC interrupt.
+ * @param __HANDLE__ TSC handle
+ * @param __INTERRUPT__ TSC interrupt
+ * @retval None
+ */
+#define __HAL_TSC_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER &= (~(__INTERRUPT__)))
+
+/** @brief Check whether the specified TSC interrupt source is enabled or not.
+ * @param __HANDLE__ TSC Handle
+ * @param __INTERRUPT__ TSC interrupt
+ * @retval SET or RESET
+ */
+#define __HAL_TSC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->IER & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/**
+ * @brief Check whether the specified TSC flag is set or not.
+ * @param __HANDLE__ TSC handle
+ * @param __FLAG__ TSC flag
+ * @retval SET or RESET
+ */
+#define __HAL_TSC_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__)) ? SET : RESET)
+
+/**
+ * @brief Clear the TSC's pending flag.
+ * @param __HANDLE__ TSC handle
+ * @param __FLAG__ TSC flag
+ * @retval None
+ */
+#define __HAL_TSC_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__))
+
+/**
+ * @brief Enable schmitt trigger hysteresis on a group of IOs.
+ * @param __HANDLE__ TSC handle
+ * @param __GX_IOY_MASK__ IOs mask
+ * @retval None
+ */
+#define __HAL_TSC_ENABLE_HYSTERESIS(__HANDLE__, __GX_IOY_MASK__) ((__HANDLE__)->Instance->IOHCR |= (__GX_IOY_MASK__))
+
+/**
+ * @brief Disable schmitt trigger hysteresis on a group of IOs.
+ * @param __HANDLE__ TSC handle
+ * @param __GX_IOY_MASK__ IOs mask
+ * @retval None
+ */
+#define __HAL_TSC_DISABLE_HYSTERESIS(__HANDLE__, __GX_IOY_MASK__) ((__HANDLE__)->Instance->IOHCR &= (~(__GX_IOY_MASK__)))
+
+/**
+ * @brief Open analog switch on a group of IOs.
+ * @param __HANDLE__ TSC handle
+ * @param __GX_IOY_MASK__ IOs mask
+ * @retval None
+ */
+#define __HAL_TSC_OPEN_ANALOG_SWITCH(__HANDLE__, __GX_IOY_MASK__) ((__HANDLE__)->Instance->IOASCR &= (~(__GX_IOY_MASK__)))
+
+/**
+ * @brief Close analog switch on a group of IOs.
+ * @param __HANDLE__ TSC handle
+ * @param __GX_IOY_MASK__ IOs mask
+ * @retval None
+ */
+#define __HAL_TSC_CLOSE_ANALOG_SWITCH(__HANDLE__, __GX_IOY_MASK__) ((__HANDLE__)->Instance->IOASCR |= (__GX_IOY_MASK__))
+
+/**
+ * @brief Enable a group of IOs in channel mode.
+ * @param __HANDLE__ TSC handle
+ * @param __GX_IOY_MASK__ IOs mask
+ * @retval None
+ */
+#define __HAL_TSC_ENABLE_CHANNEL(__HANDLE__, __GX_IOY_MASK__) ((__HANDLE__)->Instance->IOCCR |= (__GX_IOY_MASK__))
+
+/**
+ * @brief Disable a group of channel IOs.
+ * @param __HANDLE__ TSC handle
+ * @param __GX_IOY_MASK__ IOs mask
+ * @retval None
+ */
+#define __HAL_TSC_DISABLE_CHANNEL(__HANDLE__, __GX_IOY_MASK__) ((__HANDLE__)->Instance->IOCCR &= (~(__GX_IOY_MASK__)))
+
+/**
+ * @brief Enable a group of IOs in sampling mode.
+ * @param __HANDLE__ TSC handle
+ * @param __GX_IOY_MASK__ IOs mask
+ * @retval None
+ */
+#define __HAL_TSC_ENABLE_SAMPLING(__HANDLE__, __GX_IOY_MASK__) ((__HANDLE__)->Instance->IOSCR |= (__GX_IOY_MASK__))
+
+/**
+ * @brief Disable a group of sampling IOs.
+ * @param __HANDLE__ TSC handle
+ * @param __GX_IOY_MASK__ IOs mask
+ * @retval None
+ */
+#define __HAL_TSC_DISABLE_SAMPLING(__HANDLE__, __GX_IOY_MASK__) ((__HANDLE__)->Instance->IOSCR &= (~(__GX_IOY_MASK__)))
+
+/**
+ * @brief Enable acquisition groups.
+ * @param __HANDLE__ TSC handle
+ * @param __GX_MASK__ Groups mask
+ * @retval None
+ */
+#define __HAL_TSC_ENABLE_GROUP(__HANDLE__, __GX_MASK__) ((__HANDLE__)->Instance->IOGCSR |= (__GX_MASK__))
+
+/**
+ * @brief Disable acquisition groups.
+ * @param __HANDLE__ TSC handle
+ * @param __GX_MASK__ Groups mask
+ * @retval None
+ */
+#define __HAL_TSC_DISABLE_GROUP(__HANDLE__, __GX_MASK__) ((__HANDLE__)->Instance->IOGCSR &= (~(__GX_MASK__)))
+
+/** @brief Gets acquisition group status.
+ * @param __HANDLE__ TSC Handle
+ * @param __GX_INDEX__ Group index
+ * @retval SET or RESET
+ */
+#define __HAL_TSC_GET_GROUP_STATUS(__HANDLE__, __GX_INDEX__) \
+((((__HANDLE__)->Instance->IOGCSR & (uint32_t)(1UL << (((__GX_INDEX__) & 0xFUL) + 16UL))) == (uint32_t)(1UL << (((__GX_INDEX__) & 0xFUL) + 16UL))) ? TSC_GROUP_COMPLETED : TSC_GROUP_ONGOING)
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+
+/** @defgroup TSC_Private_Macros TSC Private Macros
+ * @{
+ */
+
+#define IS_TSC_CTPH(__VALUE__) (((__VALUE__) == TSC_CTPH_1CYCLE) || \
+ ((__VALUE__) == TSC_CTPH_2CYCLES) || \
+ ((__VALUE__) == TSC_CTPH_3CYCLES) || \
+ ((__VALUE__) == TSC_CTPH_4CYCLES) || \
+ ((__VALUE__) == TSC_CTPH_5CYCLES) || \
+ ((__VALUE__) == TSC_CTPH_6CYCLES) || \
+ ((__VALUE__) == TSC_CTPH_7CYCLES) || \
+ ((__VALUE__) == TSC_CTPH_8CYCLES) || \
+ ((__VALUE__) == TSC_CTPH_9CYCLES) || \
+ ((__VALUE__) == TSC_CTPH_10CYCLES) || \
+ ((__VALUE__) == TSC_CTPH_11CYCLES) || \
+ ((__VALUE__) == TSC_CTPH_12CYCLES) || \
+ ((__VALUE__) == TSC_CTPH_13CYCLES) || \
+ ((__VALUE__) == TSC_CTPH_14CYCLES) || \
+ ((__VALUE__) == TSC_CTPH_15CYCLES) || \
+ ((__VALUE__) == TSC_CTPH_16CYCLES))
+
+#define IS_TSC_CTPL(__VALUE__) (((__VALUE__) == TSC_CTPL_1CYCLE) || \
+ ((__VALUE__) == TSC_CTPL_2CYCLES) || \
+ ((__VALUE__) == TSC_CTPL_3CYCLES) || \
+ ((__VALUE__) == TSC_CTPL_4CYCLES) || \
+ ((__VALUE__) == TSC_CTPL_5CYCLES) || \
+ ((__VALUE__) == TSC_CTPL_6CYCLES) || \
+ ((__VALUE__) == TSC_CTPL_7CYCLES) || \
+ ((__VALUE__) == TSC_CTPL_8CYCLES) || \
+ ((__VALUE__) == TSC_CTPL_9CYCLES) || \
+ ((__VALUE__) == TSC_CTPL_10CYCLES) || \
+ ((__VALUE__) == TSC_CTPL_11CYCLES) || \
+ ((__VALUE__) == TSC_CTPL_12CYCLES) || \
+ ((__VALUE__) == TSC_CTPL_13CYCLES) || \
+ ((__VALUE__) == TSC_CTPL_14CYCLES) || \
+ ((__VALUE__) == TSC_CTPL_15CYCLES) || \
+ ((__VALUE__) == TSC_CTPL_16CYCLES))
+
+#define IS_TSC_SS(__VALUE__) (((FunctionalState)(__VALUE__) == DISABLE) || ((FunctionalState)(__VALUE__) == ENABLE))
+
+#define IS_TSC_SSD(__VALUE__) (((__VALUE__) == 0UL) || (((__VALUE__) > 0UL) && ((__VALUE__) < 128UL)))
+
+#define IS_TSC_SS_PRESC(__VALUE__) (((__VALUE__) == TSC_SS_PRESC_DIV1) || ((__VALUE__) == TSC_SS_PRESC_DIV2))
+
+#define IS_TSC_PG_PRESC(__VALUE__) (((__VALUE__) == TSC_PG_PRESC_DIV1) || \
+ ((__VALUE__) == TSC_PG_PRESC_DIV2) || \
+ ((__VALUE__) == TSC_PG_PRESC_DIV4) || \
+ ((__VALUE__) == TSC_PG_PRESC_DIV8) || \
+ ((__VALUE__) == TSC_PG_PRESC_DIV16) || \
+ ((__VALUE__) == TSC_PG_PRESC_DIV32) || \
+ ((__VALUE__) == TSC_PG_PRESC_DIV64) || \
+ ((__VALUE__) == TSC_PG_PRESC_DIV128))
+
+#define IS_TSC_MCV(__VALUE__) (((__VALUE__) == TSC_MCV_255) || \
+ ((__VALUE__) == TSC_MCV_511) || \
+ ((__VALUE__) == TSC_MCV_1023) || \
+ ((__VALUE__) == TSC_MCV_2047) || \
+ ((__VALUE__) == TSC_MCV_4095) || \
+ ((__VALUE__) == TSC_MCV_8191) || \
+ ((__VALUE__) == TSC_MCV_16383))
+
+#define IS_TSC_IODEF(__VALUE__) (((__VALUE__) == TSC_IODEF_OUT_PP_LOW) || ((__VALUE__) == TSC_IODEF_IN_FLOAT))
+
+#define IS_TSC_SYNC_POL(__VALUE__) (((__VALUE__) == TSC_SYNC_POLARITY_FALLING) || ((__VALUE__) == TSC_SYNC_POLARITY_RISING))
+
+#define IS_TSC_ACQ_MODE(__VALUE__) (((__VALUE__) == TSC_ACQ_MODE_NORMAL) || ((__VALUE__) == TSC_ACQ_MODE_SYNCHRO))
+
+#define IS_TSC_MCE_IT(__VALUE__) (((FunctionalState)(__VALUE__) == DISABLE) || ((FunctionalState)(__VALUE__) == ENABLE))
+
+#define IS_TSC_GROUP_INDEX(__VALUE__) (((__VALUE__) == 0UL) || (((__VALUE__) > 0UL) && ((__VALUE__) < (uint32_t)TSC_NB_OF_GROUPS)))
+
+#define IS_TSC_GROUP(__VALUE__) (((__VALUE__) == 0UL) ||\
+ (((__VALUE__) & TSC_GROUP1_IO1) == TSC_GROUP1_IO1) ||\
+ (((__VALUE__) & TSC_GROUP1_IO2) == TSC_GROUP1_IO2) ||\
+ (((__VALUE__) & TSC_GROUP1_IO3) == TSC_GROUP1_IO3) ||\
+ (((__VALUE__) & TSC_GROUP1_IO4) == TSC_GROUP1_IO4) ||\
+ (((__VALUE__) & TSC_GROUP2_IO1) == TSC_GROUP2_IO1) ||\
+ (((__VALUE__) & TSC_GROUP2_IO2) == TSC_GROUP2_IO2) ||\
+ (((__VALUE__) & TSC_GROUP2_IO3) == TSC_GROUP2_IO3) ||\
+ (((__VALUE__) & TSC_GROUP2_IO4) == TSC_GROUP2_IO4) ||\
+ (((__VALUE__) & TSC_GROUP3_IO1) == TSC_GROUP3_IO1) ||\
+ (((__VALUE__) & TSC_GROUP3_IO2) == TSC_GROUP3_IO2) ||\
+ (((__VALUE__) & TSC_GROUP3_IO3) == TSC_GROUP3_IO3) ||\
+ (((__VALUE__) & TSC_GROUP3_IO4) == TSC_GROUP3_IO4) ||\
+ (((__VALUE__) & TSC_GROUP4_IO1) == TSC_GROUP4_IO1) ||\
+ (((__VALUE__) & TSC_GROUP4_IO2) == TSC_GROUP4_IO2) ||\
+ (((__VALUE__) & TSC_GROUP4_IO3) == TSC_GROUP4_IO3) ||\
+ (((__VALUE__) & TSC_GROUP4_IO4) == TSC_GROUP4_IO4) ||\
+ (((__VALUE__) & TSC_GROUP5_IO1) == TSC_GROUP5_IO1) ||\
+ (((__VALUE__) & TSC_GROUP5_IO2) == TSC_GROUP5_IO2) ||\
+ (((__VALUE__) & TSC_GROUP5_IO3) == TSC_GROUP5_IO3) ||\
+ (((__VALUE__) & TSC_GROUP5_IO4) == TSC_GROUP5_IO4) ||\
+ (((__VALUE__) & TSC_GROUP6_IO1) == TSC_GROUP6_IO1) ||\
+ (((__VALUE__) & TSC_GROUP6_IO2) == TSC_GROUP6_IO2) ||\
+ (((__VALUE__) & TSC_GROUP6_IO3) == TSC_GROUP6_IO3) ||\
+ (((__VALUE__) & TSC_GROUP6_IO4) == TSC_GROUP6_IO4) ||\
+ (((__VALUE__) & TSC_GROUP7_IO1) == TSC_GROUP7_IO1) ||\
+ (((__VALUE__) & TSC_GROUP7_IO2) == TSC_GROUP7_IO2) ||\
+ (((__VALUE__) & TSC_GROUP7_IO3) == TSC_GROUP7_IO3) ||\
+ (((__VALUE__) & TSC_GROUP7_IO4) == TSC_GROUP7_IO4) ||\
+ (((__VALUE__) & TSC_GROUP8_IO1) == TSC_GROUP8_IO1) ||\
+ (((__VALUE__) & TSC_GROUP8_IO2) == TSC_GROUP8_IO2) ||\
+ (((__VALUE__) & TSC_GROUP8_IO3) == TSC_GROUP8_IO3) ||\
+ (((__VALUE__) & TSC_GROUP8_IO4) == TSC_GROUP8_IO4))
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup TSC_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup TSC_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+/* Initialization and de-initialization functions *****************************/
+HAL_StatusTypeDef HAL_TSC_Init(TSC_HandleTypeDef *htsc);
+HAL_StatusTypeDef HAL_TSC_DeInit(TSC_HandleTypeDef *htsc);
+void HAL_TSC_MspInit(TSC_HandleTypeDef *htsc);
+void HAL_TSC_MspDeInit(TSC_HandleTypeDef *htsc);
+
+/* Callbacks Register/UnRegister functions ***********************************/
+#if (USE_HAL_TSC_REGISTER_CALLBACKS == 1)
+HAL_StatusTypeDef HAL_TSC_RegisterCallback(TSC_HandleTypeDef *htsc, HAL_TSC_CallbackIDTypeDef CallbackID, pTSC_CallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_TSC_UnRegisterCallback(TSC_HandleTypeDef *htsc, HAL_TSC_CallbackIDTypeDef CallbackID);
+#endif /* USE_HAL_TSC_REGISTER_CALLBACKS */
+/**
+ * @}
+ */
+
+/** @addtogroup TSC_Exported_Functions_Group2 Input and Output operation functions
+ * @{
+ */
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_TSC_Start(TSC_HandleTypeDef *htsc);
+HAL_StatusTypeDef HAL_TSC_Start_IT(TSC_HandleTypeDef *htsc);
+HAL_StatusTypeDef HAL_TSC_Stop(TSC_HandleTypeDef *htsc);
+HAL_StatusTypeDef HAL_TSC_Stop_IT(TSC_HandleTypeDef *htsc);
+HAL_StatusTypeDef HAL_TSC_PollForAcquisition(TSC_HandleTypeDef *htsc);
+TSC_GroupStatusTypeDef HAL_TSC_GroupGetStatus(TSC_HandleTypeDef *htsc, uint32_t gx_index);
+uint32_t HAL_TSC_GroupGetValue(TSC_HandleTypeDef *htsc, uint32_t gx_index);
+/**
+ * @}
+ */
+
+/** @addtogroup TSC_Exported_Functions_Group3 Peripheral Control functions
+ * @{
+ */
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef HAL_TSC_IOConfig(TSC_HandleTypeDef *htsc, TSC_IOConfigTypeDef *config);
+HAL_StatusTypeDef HAL_TSC_IODischarge(TSC_HandleTypeDef *htsc, FunctionalState choice);
+/**
+ * @}
+ */
+
+/** @addtogroup TSC_Exported_Functions_Group4 Peripheral State and Errors functions
+ * @{
+ */
+/* Peripheral State and Error functions ***************************************/
+HAL_TSC_StateTypeDef HAL_TSC_GetState(TSC_HandleTypeDef *htsc);
+/**
+ * @}
+ */
+
+/** @addtogroup TSC_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks
+ * @{
+ */
+/******* TSC IRQHandler and Callbacks used in Interrupt mode */
+void HAL_TSC_IRQHandler(TSC_HandleTypeDef *htsc);
+void HAL_TSC_ConvCpltCallback(TSC_HandleTypeDef *htsc);
+void HAL_TSC_ErrorCallback(TSC_HandleTypeDef *htsc);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* TSC */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32F0xx_HAL_TSC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart.h
new file mode 100644
index 0000000..178689c
--- /dev/null
+++ b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart.h
@@ -0,0 +1,1531 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_uart.h
+ * @author MCD Application Team
+ * @brief Header file of UART HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32F0xx_HAL_UART_H
+#define STM32F0xx_HAL_UART_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup UART
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup UART_Exported_Types UART Exported Types
+ * @{
+ */
+
+/**
+ * @brief UART Init Structure definition
+ */
+typedef struct
+{
+ uint32_t BaudRate; /*!< This member configures the UART communication baud rate.
+ The baud rate register is computed using the following formula:
+ - If oversampling is 16 or in LIN mode,
+ Baud Rate Register = ((uart_ker_ck) / ((huart->Init.BaudRate)))
+ - If oversampling is 8,
+ Baud Rate Register[15:4] = ((2 * uart_ker_ck) / ((huart->Init.BaudRate)))[15:4]
+ Baud Rate Register[3] = 0
+ Baud Rate Register[2:0] = (((2 * uart_ker_ck) / ((huart->Init.BaudRate)))[3:0]) >> 1
+ where uart_ker_ck is the UART input clock */
+
+ uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
+ This parameter can be a value of @ref UARTEx_Word_Length. */
+
+ uint32_t StopBits; /*!< Specifies the number of stop bits transmitted.
+ This parameter can be a value of @ref UART_Stop_Bits. */
+
+ uint32_t Parity; /*!< Specifies the parity mode.
+ This parameter can be a value of @ref UART_Parity
+ @note When parity is enabled, the computed parity is inserted
+ at the MSB position of the transmitted data (9th bit when
+ the word length is set to 9 data bits; 8th bit when the
+ word length is set to 8 data bits). */
+
+ uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled.
+ This parameter can be a value of @ref UART_Mode. */
+
+ uint32_t HwFlowCtl; /*!< Specifies whether the hardware flow control mode is enabled
+ or disabled.
+ This parameter can be a value of @ref UART_Hardware_Flow_Control. */
+
+ uint32_t OverSampling; /*!< Specifies whether the Over sampling 8 is enabled or disabled, to achieve higher speed (up to f_PCLK/8).
+ This parameter can be a value of @ref UART_Over_Sampling. */
+
+ uint32_t OneBitSampling; /*!< Specifies whether a single sample or three samples' majority vote is selected.
+ Selecting the single sample method increases the receiver tolerance to clock
+ deviations. This parameter can be a value of @ref UART_OneBit_Sampling. */
+
+
+} UART_InitTypeDef;
+
+/**
+ * @brief UART Advanced Features initialization structure definition
+ */
+typedef struct
+{
+ uint32_t AdvFeatureInit; /*!< Specifies which advanced UART features is initialized. Several
+ Advanced Features may be initialized at the same time .
+ This parameter can be a value of @ref UART_Advanced_Features_Initialization_Type. */
+
+ uint32_t TxPinLevelInvert; /*!< Specifies whether the TX pin active level is inverted.
+ This parameter can be a value of @ref UART_Tx_Inv. */
+
+ uint32_t RxPinLevelInvert; /*!< Specifies whether the RX pin active level is inverted.
+ This parameter can be a value of @ref UART_Rx_Inv. */
+
+ uint32_t DataInvert; /*!< Specifies whether data are inverted (positive/direct logic
+ vs negative/inverted logic).
+ This parameter can be a value of @ref UART_Data_Inv. */
+
+ uint32_t Swap; /*!< Specifies whether TX and RX pins are swapped.
+ This parameter can be a value of @ref UART_Rx_Tx_Swap. */
+
+ uint32_t OverrunDisable; /*!< Specifies whether the reception overrun detection is disabled.
+ This parameter can be a value of @ref UART_Overrun_Disable. */
+
+ uint32_t DMADisableonRxError; /*!< Specifies whether the DMA is disabled in case of reception error.
+ This parameter can be a value of @ref UART_DMA_Disable_on_Rx_Error. */
+
+ uint32_t AutoBaudRateEnable; /*!< Specifies whether auto Baud rate detection is enabled.
+ This parameter can be a value of @ref UART_AutoBaudRate_Enable. */
+
+ uint32_t AutoBaudRateMode; /*!< If auto Baud rate detection is enabled, specifies how the rate
+ detection is carried out.
+ This parameter can be a value of @ref UART_AutoBaud_Rate_Mode. */
+
+ uint32_t MSBFirst; /*!< Specifies whether MSB is sent first on UART line.
+ This parameter can be a value of @ref UART_MSB_First. */
+} UART_AdvFeatureInitTypeDef;
+
+/**
+ * @brief HAL UART State definition
+ * @note HAL UART State value is a combination of 2 different substates: gState and RxState (see @ref UART_State_Definition).
+ * - gState contains UART state information related to global Handle management
+ * and also information related to Tx operations.
+ * gState value coding follow below described bitmap :
+ * b7-b6 Error information
+ * 00 : No Error
+ * 01 : (Not Used)
+ * 10 : Timeout
+ * 11 : Error
+ * b5 Peripheral initialization status
+ * 0 : Reset (Peripheral not initialized)
+ * 1 : Init done (Peripheral not initialized. HAL UART Init function already called)
+ * b4-b3 (not used)
+ * xx : Should be set to 00
+ * b2 Intrinsic process state
+ * 0 : Ready
+ * 1 : Busy (Peripheral busy with some configuration or internal operations)
+ * b1 (not used)
+ * x : Should be set to 0
+ * b0 Tx state
+ * 0 : Ready (no Tx operation ongoing)
+ * 1 : Busy (Tx operation ongoing)
+ * - RxState contains information related to Rx operations.
+ * RxState value coding follow below described bitmap :
+ * b7-b6 (not used)
+ * xx : Should be set to 00
+ * b5 Peripheral initialization status
+ * 0 : Reset (Peripheral not initialized)
+ * 1 : Init done (Peripheral not initialized)
+ * b4-b2 (not used)
+ * xxx : Should be set to 000
+ * b1 Rx state
+ * 0 : Ready (no Rx operation ongoing)
+ * 1 : Busy (Rx operation ongoing)
+ * b0 (not used)
+ * x : Should be set to 0.
+ */
+typedef uint32_t HAL_UART_StateTypeDef;
+
+/**
+ * @brief UART clock sources definition
+ */
+typedef enum
+{
+ UART_CLOCKSOURCE_PCLK1 = 0x00U, /*!< PCLK1 clock source */
+ UART_CLOCKSOURCE_HSI = 0x02U, /*!< HSI clock source */
+ UART_CLOCKSOURCE_SYSCLK = 0x04U, /*!< SYSCLK clock source */
+ UART_CLOCKSOURCE_LSE = 0x08U, /*!< LSE clock source */
+ UART_CLOCKSOURCE_UNDEFINED = 0x10U /*!< Undefined clock source */
+} UART_ClockSourceTypeDef;
+
+/**
+ * @brief UART handle Structure definition
+ */
+typedef struct __UART_HandleTypeDef
+{
+ USART_TypeDef *Instance; /*!< UART registers base address */
+
+ UART_InitTypeDef Init; /*!< UART communication parameters */
+
+ UART_AdvFeatureInitTypeDef AdvancedInit; /*!< UART Advanced Features initialization parameters */
+
+ uint8_t *pTxBuffPtr; /*!< Pointer to UART Tx transfer Buffer */
+
+ uint16_t TxXferSize; /*!< UART Tx Transfer size */
+
+ __IO uint16_t TxXferCount; /*!< UART Tx Transfer Counter */
+
+ uint8_t *pRxBuffPtr; /*!< Pointer to UART Rx transfer Buffer */
+
+ uint16_t RxXferSize; /*!< UART Rx Transfer size */
+
+ __IO uint16_t RxXferCount; /*!< UART Rx Transfer Counter */
+
+ uint16_t Mask; /*!< UART Rx RDR register mask */
+
+ void (*RxISR)(struct __UART_HandleTypeDef *huart); /*!< Function pointer on Rx IRQ handler */
+
+ void (*TxISR)(struct __UART_HandleTypeDef *huart); /*!< Function pointer on Tx IRQ handler */
+
+ DMA_HandleTypeDef *hdmatx; /*!< UART Tx DMA Handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /*!< UART Rx DMA Handle parameters */
+
+ HAL_LockTypeDef Lock; /*!< Locking object */
+
+ __IO HAL_UART_StateTypeDef gState; /*!< UART state information related to global Handle management
+ and also related to Tx operations.
+ This parameter can be a value of @ref HAL_UART_StateTypeDef */
+
+ __IO HAL_UART_StateTypeDef RxState; /*!< UART state information related to Rx operations.
+ This parameter can be a value of @ref HAL_UART_StateTypeDef */
+
+ __IO uint32_t ErrorCode; /*!< UART Error code */
+
+#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
+ void (* TxHalfCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Tx Half Complete Callback */
+ void (* TxCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Tx Complete Callback */
+ void (* RxHalfCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Rx Half Complete Callback */
+ void (* RxCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Rx Complete Callback */
+ void (* ErrorCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Error Callback */
+ void (* AbortCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Abort Complete Callback */
+ void (* AbortTransmitCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Abort Transmit Complete Callback */
+ void (* AbortReceiveCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Abort Receive Complete Callback */
+ void (* WakeupCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Wakeup Callback */
+
+ void (* MspInitCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Msp Init callback */
+ void (* MspDeInitCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Msp DeInit callback */
+#endif /* USE_HAL_UART_REGISTER_CALLBACKS */
+
+} UART_HandleTypeDef;
+
+#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
+/**
+ * @brief HAL UART Callback ID enumeration definition
+ */
+typedef enum
+{
+ HAL_UART_TX_HALFCOMPLETE_CB_ID = 0x00U, /*!< UART Tx Half Complete Callback ID */
+ HAL_UART_TX_COMPLETE_CB_ID = 0x01U, /*!< UART Tx Complete Callback ID */
+ HAL_UART_RX_HALFCOMPLETE_CB_ID = 0x02U, /*!< UART Rx Half Complete Callback ID */
+ HAL_UART_RX_COMPLETE_CB_ID = 0x03U, /*!< UART Rx Complete Callback ID */
+ HAL_UART_ERROR_CB_ID = 0x04U, /*!< UART Error Callback ID */
+ HAL_UART_ABORT_COMPLETE_CB_ID = 0x05U, /*!< UART Abort Complete Callback ID */
+ HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID = 0x06U, /*!< UART Abort Transmit Complete Callback ID */
+ HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID = 0x07U, /*!< UART Abort Receive Complete Callback ID */
+ HAL_UART_WAKEUP_CB_ID = 0x08U, /*!< UART Wakeup Callback ID */
+
+ HAL_UART_MSPINIT_CB_ID = 0x0BU, /*!< UART MspInit callback ID */
+ HAL_UART_MSPDEINIT_CB_ID = 0x0CU /*!< UART MspDeInit callback ID */
+
+} HAL_UART_CallbackIDTypeDef;
+
+/**
+ * @brief HAL UART Callback pointer definition
+ */
+typedef void (*pUART_CallbackTypeDef)(UART_HandleTypeDef *huart); /*!< pointer to an UART callback function */
+
+#endif /* USE_HAL_UART_REGISTER_CALLBACKS */
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup UART_Exported_Constants UART Exported Constants
+ * @{
+ */
+
+/** @defgroup UART_State_Definition UART State Code Definition
+ * @{
+ */
+#define HAL_UART_STATE_RESET 0x00000000U /*!< Peripheral is not initialized
+ Value is allowed for gState and RxState */
+#define HAL_UART_STATE_READY 0x00000020U /*!< Peripheral Initialized and ready for use
+ Value is allowed for gState and RxState */
+#define HAL_UART_STATE_BUSY 0x00000024U /*!< an internal process is ongoing
+ Value is allowed for gState only */
+#define HAL_UART_STATE_BUSY_TX 0x00000021U /*!< Data Transmission process is ongoing
+ Value is allowed for gState only */
+#define HAL_UART_STATE_BUSY_RX 0x00000022U /*!< Data Reception process is ongoing
+ Value is allowed for RxState only */
+#define HAL_UART_STATE_BUSY_TX_RX 0x00000023U /*!< Data Transmission and Reception process is ongoing
+ Not to be used for neither gState nor RxState.
+ Value is result of combination (Or) between gState and RxState values */
+#define HAL_UART_STATE_TIMEOUT 0x000000A0U /*!< Timeout state
+ Value is allowed for gState only */
+#define HAL_UART_STATE_ERROR 0x000000E0U /*!< Error
+ Value is allowed for gState only */
+/**
+ * @}
+ */
+
+/** @defgroup UART_Error_Definition UART Error Definition
+ * @{
+ */
+#define HAL_UART_ERROR_NONE ((uint32_t)0x00000000U) /*!< No error */
+#define HAL_UART_ERROR_PE ((uint32_t)0x00000001U) /*!< Parity error */
+#define HAL_UART_ERROR_NE ((uint32_t)0x00000002U) /*!< Noise error */
+#define HAL_UART_ERROR_FE ((uint32_t)0x00000004U) /*!< Frame error */
+#define HAL_UART_ERROR_ORE ((uint32_t)0x00000008U) /*!< Overrun error */
+#define HAL_UART_ERROR_DMA ((uint32_t)0x00000010U) /*!< DMA transfer error */
+#define HAL_UART_ERROR_RTO ((uint32_t)0x00000020U) /*!< Receiver Timeout error */
+
+#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
+#define HAL_UART_ERROR_INVALID_CALLBACK ((uint32_t)0x00000040U) /*!< Invalid Callback error */
+#endif /* USE_HAL_UART_REGISTER_CALLBACKS */
+/**
+ * @}
+ */
+
+/** @defgroup UART_Stop_Bits UART Number of Stop Bits
+ * @{
+ */
+#define UART_STOPBITS_0_5 USART_CR2_STOP_0 /*!< UART frame with 0.5 stop bit */
+#define UART_STOPBITS_1 0x00000000U /*!< UART frame with 1 stop bit */
+#define UART_STOPBITS_1_5 (USART_CR2_STOP_0 | USART_CR2_STOP_1) /*!< UART frame with 1.5 stop bits */
+#define UART_STOPBITS_2 USART_CR2_STOP_1 /*!< UART frame with 2 stop bits */
+/**
+ * @}
+ */
+
+/** @defgroup UART_Parity UART Parity
+ * @{
+ */
+#define UART_PARITY_NONE 0x00000000U /*!< No parity */
+#define UART_PARITY_EVEN USART_CR1_PCE /*!< Even parity */
+#define UART_PARITY_ODD (USART_CR1_PCE | USART_CR1_PS) /*!< Odd parity */
+/**
+ * @}
+ */
+
+/** @defgroup UART_Hardware_Flow_Control UART Hardware Flow Control
+ * @{
+ */
+#define UART_HWCONTROL_NONE 0x00000000U /*!< No hardware control */
+#define UART_HWCONTROL_RTS USART_CR3_RTSE /*!< Request To Send */
+#define UART_HWCONTROL_CTS USART_CR3_CTSE /*!< Clear To Send */
+#define UART_HWCONTROL_RTS_CTS (USART_CR3_RTSE | USART_CR3_CTSE) /*!< Request and Clear To Send */
+/**
+ * @}
+ */
+
+/** @defgroup UART_Mode UART Transfer Mode
+ * @{
+ */
+#define UART_MODE_RX USART_CR1_RE /*!< RX mode */
+#define UART_MODE_TX USART_CR1_TE /*!< TX mode */
+#define UART_MODE_TX_RX (USART_CR1_TE |USART_CR1_RE) /*!< RX and TX mode */
+/**
+ * @}
+ */
+
+/** @defgroup UART_State UART State
+ * @{
+ */
+#define UART_STATE_DISABLE 0x00000000U /*!< UART disabled */
+#define UART_STATE_ENABLE USART_CR1_UE /*!< UART enabled */
+/**
+ * @}
+ */
+
+/** @defgroup UART_Over_Sampling UART Over Sampling
+ * @{
+ */
+#define UART_OVERSAMPLING_16 0x00000000U /*!< Oversampling by 16 */
+#define UART_OVERSAMPLING_8 USART_CR1_OVER8 /*!< Oversampling by 8 */
+/**
+ * @}
+ */
+
+/** @defgroup UART_OneBit_Sampling UART One Bit Sampling Method
+ * @{
+ */
+#define UART_ONE_BIT_SAMPLE_DISABLE 0x00000000U /*!< One-bit sampling disable */
+#define UART_ONE_BIT_SAMPLE_ENABLE USART_CR3_ONEBIT /*!< One-bit sampling enable */
+/**
+ * @}
+ */
+
+/** @defgroup UART_AutoBaud_Rate_Mode UART Advanced Feature AutoBaud Rate Mode
+ * @{
+ */
+#define UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT 0x00000000U /*!< Auto Baud rate detection on start bit */
+#define UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE USART_CR2_ABRMODE_0 /*!< Auto Baud rate detection on falling edge */
+#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME USART_CR2_ABRMODE_1 /*!< Auto Baud rate detection on 0x7F frame detection */
+#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X55FRAME USART_CR2_ABRMODE /*!< Auto Baud rate detection on 0x55 frame detection */
+/**
+ * @}
+ */
+
+/** @defgroup UART_Receiver_Timeout UART Receiver Timeout
+ * @{
+ */
+#define UART_RECEIVER_TIMEOUT_DISABLE 0x00000000U /*!< UART Receiver Timeout disable */
+#define UART_RECEIVER_TIMEOUT_ENABLE USART_CR2_RTOEN /*!< UART Receiver Timeout enable */
+/**
+ * @}
+ */
+
+/** @defgroup UART_LIN UART Local Interconnection Network mode
+ * @{
+ */
+#define UART_LIN_DISABLE 0x00000000U /*!< Local Interconnect Network disable */
+#define UART_LIN_ENABLE USART_CR2_LINEN /*!< Local Interconnect Network enable */
+/**
+ * @}
+ */
+
+/** @defgroup UART_LIN_Break_Detection UART LIN Break Detection
+ * @{
+ */
+#define UART_LINBREAKDETECTLENGTH_10B 0x00000000U /*!< LIN 10-bit break detection length */
+#define UART_LINBREAKDETECTLENGTH_11B USART_CR2_LBDL /*!< LIN 11-bit break detection length */
+/**
+ * @}
+ */
+
+/** @defgroup UART_DMA_Tx UART DMA Tx
+ * @{
+ */
+#define UART_DMA_TX_DISABLE 0x00000000U /*!< UART DMA TX disabled */
+#define UART_DMA_TX_ENABLE USART_CR3_DMAT /*!< UART DMA TX enabled */
+/**
+ * @}
+ */
+
+/** @defgroup UART_DMA_Rx UART DMA Rx
+ * @{
+ */
+#define UART_DMA_RX_DISABLE 0x00000000U /*!< UART DMA RX disabled */
+#define UART_DMA_RX_ENABLE USART_CR3_DMAR /*!< UART DMA RX enabled */
+/**
+ * @}
+ */
+
+/** @defgroup UART_Half_Duplex_Selection UART Half Duplex Selection
+ * @{
+ */
+#define UART_HALF_DUPLEX_DISABLE 0x00000000U /*!< UART half-duplex disabled */
+#define UART_HALF_DUPLEX_ENABLE USART_CR3_HDSEL /*!< UART half-duplex enabled */
+/**
+ * @}
+ */
+
+/** @defgroup UART_WakeUp_Methods UART WakeUp Methods
+ * @{
+ */
+#define UART_WAKEUPMETHOD_IDLELINE 0x00000000U /*!< UART wake-up on idle line */
+#define UART_WAKEUPMETHOD_ADDRESSMARK USART_CR1_WAKE /*!< UART wake-up on address mark */
+/**
+ * @}
+ */
+
+/** @defgroup UART_Request_Parameters UART Request Parameters
+ * @{
+ */
+#define UART_AUTOBAUD_REQUEST USART_RQR_ABRRQ /*!< Auto-Baud Rate Request */
+#define UART_SENDBREAK_REQUEST USART_RQR_SBKRQ /*!< Send Break Request */
+#define UART_MUTE_MODE_REQUEST USART_RQR_MMRQ /*!< Mute Mode Request */
+#define UART_RXDATA_FLUSH_REQUEST USART_RQR_RXFRQ /*!< Receive Data flush Request */
+#define UART_TXDATA_FLUSH_REQUEST USART_RQR_TXFRQ /*!< Transmit data flush Request */
+/**
+ * @}
+ */
+
+/** @defgroup UART_Advanced_Features_Initialization_Type UART Advanced Feature Initialization Type
+ * @{
+ */
+#define UART_ADVFEATURE_NO_INIT 0x00000000U /*!< No advanced feature initialization */
+#define UART_ADVFEATURE_TXINVERT_INIT 0x00000001U /*!< TX pin active level inversion */
+#define UART_ADVFEATURE_RXINVERT_INIT 0x00000002U /*!< RX pin active level inversion */
+#define UART_ADVFEATURE_DATAINVERT_INIT 0x00000004U /*!< Binary data inversion */
+#define UART_ADVFEATURE_SWAP_INIT 0x00000008U /*!< TX/RX pins swap */
+#define UART_ADVFEATURE_RXOVERRUNDISABLE_INIT 0x00000010U /*!< RX overrun disable */
+#define UART_ADVFEATURE_DMADISABLEONERROR_INIT 0x00000020U /*!< DMA disable on Reception Error */
+#define UART_ADVFEATURE_AUTOBAUDRATE_INIT 0x00000040U /*!< Auto Baud rate detection initialization */
+#define UART_ADVFEATURE_MSBFIRST_INIT 0x00000080U /*!< Most significant bit sent/received first */
+/**
+ * @}
+ */
+
+/** @defgroup UART_Tx_Inv UART Advanced Feature TX Pin Active Level Inversion
+ * @{
+ */
+#define UART_ADVFEATURE_TXINV_DISABLE 0x00000000U /*!< TX pin active level inversion disable */
+#define UART_ADVFEATURE_TXINV_ENABLE USART_CR2_TXINV /*!< TX pin active level inversion enable */
+/**
+ * @}
+ */
+
+/** @defgroup UART_Rx_Inv UART Advanced Feature RX Pin Active Level Inversion
+ * @{
+ */
+#define UART_ADVFEATURE_RXINV_DISABLE 0x00000000U /*!< RX pin active level inversion disable */
+#define UART_ADVFEATURE_RXINV_ENABLE USART_CR2_RXINV /*!< RX pin active level inversion enable */
+/**
+ * @}
+ */
+
+/** @defgroup UART_Data_Inv UART Advanced Feature Binary Data Inversion
+ * @{
+ */
+#define UART_ADVFEATURE_DATAINV_DISABLE 0x00000000U /*!< Binary data inversion disable */
+#define UART_ADVFEATURE_DATAINV_ENABLE USART_CR2_DATAINV /*!< Binary data inversion enable */
+/**
+ * @}
+ */
+
+/** @defgroup UART_Rx_Tx_Swap UART Advanced Feature RX TX Pins Swap
+ * @{
+ */
+#define UART_ADVFEATURE_SWAP_DISABLE 0x00000000U /*!< TX/RX pins swap disable */
+#define UART_ADVFEATURE_SWAP_ENABLE USART_CR2_SWAP /*!< TX/RX pins swap enable */
+/**
+ * @}
+ */
+
+/** @defgroup UART_Overrun_Disable UART Advanced Feature Overrun Disable
+ * @{
+ */
+#define UART_ADVFEATURE_OVERRUN_ENABLE 0x00000000U /*!< RX overrun enable */
+#define UART_ADVFEATURE_OVERRUN_DISABLE USART_CR3_OVRDIS /*!< RX overrun disable */
+/**
+ * @}
+ */
+
+/** @defgroup UART_AutoBaudRate_Enable UART Advanced Feature Auto BaudRate Enable
+ * @{
+ */
+#define UART_ADVFEATURE_AUTOBAUDRATE_DISABLE 0x00000000U /*!< RX Auto Baud rate detection enable */
+#define UART_ADVFEATURE_AUTOBAUDRATE_ENABLE USART_CR2_ABREN /*!< RX Auto Baud rate detection disable */
+/**
+ * @}
+ */
+
+/** @defgroup UART_DMA_Disable_on_Rx_Error UART Advanced Feature DMA Disable On Rx Error
+ * @{
+ */
+#define UART_ADVFEATURE_DMA_ENABLEONRXERROR 0x00000000U /*!< DMA enable on Reception Error */
+#define UART_ADVFEATURE_DMA_DISABLEONRXERROR USART_CR3_DDRE /*!< DMA disable on Reception Error */
+/**
+ * @}
+ */
+
+/** @defgroup UART_MSB_First UART Advanced Feature MSB First
+ * @{
+ */
+#define UART_ADVFEATURE_MSBFIRST_DISABLE 0x00000000U /*!< Most significant bit sent/received first disable */
+#define UART_ADVFEATURE_MSBFIRST_ENABLE USART_CR2_MSBFIRST /*!< Most significant bit sent/received first enable */
+/**
+ * @}
+ */
+#if defined(USART_CR1_UESM)
+
+/** @defgroup UART_Stop_Mode_Enable UART Advanced Feature Stop Mode Enable
+ * @{
+ */
+#define UART_ADVFEATURE_STOPMODE_DISABLE 0x00000000U /*!< UART stop mode disable */
+#define UART_ADVFEATURE_STOPMODE_ENABLE USART_CR1_UESM /*!< UART stop mode enable */
+/**
+ * @}
+ */
+#endif /* USART_CR1_UESM */
+
+/** @defgroup UART_Mute_Mode UART Advanced Feature Mute Mode Enable
+ * @{
+ */
+#define UART_ADVFEATURE_MUTEMODE_DISABLE 0x00000000U /*!< UART mute mode disable */
+#define UART_ADVFEATURE_MUTEMODE_ENABLE USART_CR1_MME /*!< UART mute mode enable */
+/**
+ * @}
+ */
+
+/** @defgroup UART_CR2_ADDRESS_LSB_POS UART Address-matching LSB Position In CR2 Register
+ * @{
+ */
+#define UART_CR2_ADDRESS_LSB_POS 24U /*!< UART address-matching LSB position in CR2 register */
+/**
+ * @}
+ */
+#if defined(USART_CR1_UESM)
+
+/** @defgroup UART_WakeUp_from_Stop_Selection UART WakeUp From Stop Selection
+ * @{
+ */
+#define UART_WAKEUP_ON_ADDRESS 0x00000000U /*!< UART wake-up on address */
+#define UART_WAKEUP_ON_STARTBIT USART_CR3_WUS_1 /*!< UART wake-up on start bit */
+#define UART_WAKEUP_ON_READDATA_NONEMPTY USART_CR3_WUS /*!< UART wake-up on receive data register not empty or RXFIFO is not empty */
+/**
+ * @}
+ */
+#endif /* USART_CR1_UESM */
+
+/** @defgroup UART_DriverEnable_Polarity UART DriverEnable Polarity
+ * @{
+ */
+#define UART_DE_POLARITY_HIGH 0x00000000U /*!< Driver enable signal is active high */
+#define UART_DE_POLARITY_LOW USART_CR3_DEP /*!< Driver enable signal is active low */
+/**
+ * @}
+ */
+
+/** @defgroup UART_CR1_DEAT_ADDRESS_LSB_POS UART Driver Enable Assertion Time LSB Position In CR1 Register
+ * @{
+ */
+#define UART_CR1_DEAT_ADDRESS_LSB_POS 21U /*!< UART Driver Enable assertion time LSB position in CR1 register */
+/**
+ * @}
+ */
+
+/** @defgroup UART_CR1_DEDT_ADDRESS_LSB_POS UART Driver Enable DeAssertion Time LSB Position In CR1 Register
+ * @{
+ */
+#define UART_CR1_DEDT_ADDRESS_LSB_POS 16U /*!< UART Driver Enable de-assertion time LSB position in CR1 register */
+/**
+ * @}
+ */
+
+/** @defgroup UART_Interruption_Mask UART Interruptions Flag Mask
+ * @{
+ */
+#define UART_IT_MASK 0x001FU /*!< UART interruptions flags mask */
+/**
+ * @}
+ */
+
+/** @defgroup UART_TimeOut_Value UART polling-based communications time-out value
+ * @{
+ */
+#define HAL_UART_TIMEOUT_VALUE 0x1FFFFFFU /*!< UART polling-based communications time-out value */
+/**
+ * @}
+ */
+
+/** @defgroup UART_Flags UART Status Flags
+ * Elements values convention: 0xXXXX
+ * - 0xXXXX : Flag mask in the ISR register
+ * @{
+ */
+#define UART_FLAG_REACK USART_ISR_REACK /*!< UART receive enable acknowledge flag */
+#define UART_FLAG_TEACK USART_ISR_TEACK /*!< UART transmit enable acknowledge flag */
+#if defined(USART_CR1_UESM)
+#define UART_FLAG_WUF USART_ISR_WUF /*!< UART wake-up from stop mode flag */
+#endif /* USART_CR1_UESM */
+#define UART_FLAG_RWU USART_ISR_RWU /*!< UART receiver wake-up from mute mode flag */
+#define UART_FLAG_SBKF USART_ISR_SBKF /*!< UART send break flag */
+#define UART_FLAG_CMF USART_ISR_CMF /*!< UART character match flag */
+#define UART_FLAG_BUSY USART_ISR_BUSY /*!< UART busy flag */
+#define UART_FLAG_ABRF USART_ISR_ABRF /*!< UART auto Baud rate flag */
+#define UART_FLAG_ABRE USART_ISR_ABRE /*!< UART auto Baud rate error */
+#define UART_FLAG_RTOF USART_ISR_RTOF /*!< UART receiver timeout flag */
+#define UART_FLAG_CTS USART_ISR_CTS /*!< UART clear to send flag */
+#define UART_FLAG_CTSIF USART_ISR_CTSIF /*!< UART clear to send interrupt flag */
+#define UART_FLAG_LBDF USART_ISR_LBDF /*!< UART LIN break detection flag */
+#define UART_FLAG_TXE USART_ISR_TXE /*!< UART transmit data register empty */
+#define UART_FLAG_TC USART_ISR_TC /*!< UART transmission complete */
+#define UART_FLAG_RXNE USART_ISR_RXNE /*!< UART read data register not empty */
+#define UART_FLAG_IDLE USART_ISR_IDLE /*!< UART idle flag */
+#define UART_FLAG_ORE USART_ISR_ORE /*!< UART overrun error */
+#define UART_FLAG_NE USART_ISR_NE /*!< UART noise error */
+#define UART_FLAG_FE USART_ISR_FE /*!< UART frame error */
+#define UART_FLAG_PE USART_ISR_PE /*!< UART parity error */
+/**
+ * @}
+ */
+
+/** @defgroup UART_Interrupt_definition UART Interrupts Definition
+ * Elements values convention: 000ZZZZZ0XXYYYYYb
+ * - YYYYY : Interrupt source position in the XX register (5bits)
+ * - XX : Interrupt source register (2bits)
+ * - 01: CR1 register
+ * - 10: CR2 register
+ * - 11: CR3 register
+ * - ZZZZZ : Flag position in the ISR register(5bits)
+ * Elements values convention: 000000000XXYYYYYb
+ * - YYYYY : Interrupt source position in the XX register (5bits)
+ * - XX : Interrupt source register (2bits)
+ * - 01: CR1 register
+ * - 10: CR2 register
+ * - 11: CR3 register
+ * Elements values convention: 0000ZZZZ00000000b
+ * - ZZZZ : Flag position in the ISR register(4bits)
+ * @{
+ */
+#define UART_IT_PE 0x0028U /*!< UART parity error interruption */
+#define UART_IT_TXE 0x0727U /*!< UART transmit data register empty interruption */
+#define UART_IT_TC 0x0626U /*!< UART transmission complete interruption */
+#define UART_IT_RXNE 0x0525U /*!< UART read data register not empty interruption */
+#define UART_IT_IDLE 0x0424U /*!< UART idle interruption */
+#define UART_IT_LBD 0x0846U /*!< UART LIN break detection interruption */
+#define UART_IT_CTS 0x096AU /*!< UART CTS interruption */
+#define UART_IT_CM 0x112EU /*!< UART character match interruption */
+#if defined(USART_CR1_UESM)
+#define UART_IT_WUF 0x1476U /*!< UART wake-up from stop mode interruption */
+#endif /* USART_CR1_UESM */
+#define UART_IT_RTO 0x0B3AU /*!< UART receiver timeout interruption */
+
+#define UART_IT_ERR 0x0060U /*!< UART error interruption */
+
+#define UART_IT_ORE 0x0300U /*!< UART overrun error interruption */
+#define UART_IT_NE 0x0200U /*!< UART noise error interruption */
+#define UART_IT_FE 0x0100U /*!< UART frame error interruption */
+/**
+ * @}
+ */
+
+/** @defgroup UART_IT_CLEAR_Flags UART Interruption Clear Flags
+ * @{
+ */
+#define UART_CLEAR_PEF USART_ICR_PECF /*!< Parity Error Clear Flag */
+#define UART_CLEAR_FEF USART_ICR_FECF /*!< Framing Error Clear Flag */
+#define UART_CLEAR_NEF USART_ICR_NCF /*!< Noise Error detected Clear Flag */
+#define UART_CLEAR_OREF USART_ICR_ORECF /*!< Overrun Error Clear Flag */
+#define UART_CLEAR_IDLEF USART_ICR_IDLECF /*!< IDLE line detected Clear Flag */
+#define UART_CLEAR_TCF USART_ICR_TCCF /*!< Transmission Complete Clear Flag */
+#define UART_CLEAR_LBDF USART_ICR_LBDCF /*!< LIN Break Detection Clear Flag */
+#define UART_CLEAR_CTSF USART_ICR_CTSCF /*!< CTS Interrupt Clear Flag */
+#define UART_CLEAR_CMF USART_ICR_CMCF /*!< Character Match Clear Flag */
+#if defined(USART_CR1_UESM)
+#define UART_CLEAR_WUF USART_ICR_WUCF /*!< Wake Up from stop mode Clear Flag */
+#endif /* USART_CR1_UESM */
+#define UART_CLEAR_RTOF USART_ICR_RTOCF /*!< UART receiver timeout clear flag */
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup UART_Exported_Macros UART Exported Macros
+ * @{
+ */
+
+/** @brief Reset UART handle states.
+ * @param __HANDLE__ UART handle.
+ * @retval None
+ */
+#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
+#define __HAL_UART_RESET_HANDLE_STATE(__HANDLE__) do{ \
+ (__HANDLE__)->gState = HAL_UART_STATE_RESET; \
+ (__HANDLE__)->RxState = HAL_UART_STATE_RESET; \
+ (__HANDLE__)->MspInitCallback = NULL; \
+ (__HANDLE__)->MspDeInitCallback = NULL; \
+ } while(0U)
+#else
+#define __HAL_UART_RESET_HANDLE_STATE(__HANDLE__) do{ \
+ (__HANDLE__)->gState = HAL_UART_STATE_RESET; \
+ (__HANDLE__)->RxState = HAL_UART_STATE_RESET; \
+ } while(0U)
+#endif /*USE_HAL_UART_REGISTER_CALLBACKS */
+
+/** @brief Flush the UART Data registers.
+ * @param __HANDLE__ specifies the UART Handle.
+ * @retval None
+ */
+#define __HAL_UART_FLUSH_DRREGISTER(__HANDLE__) \
+ do{ \
+ SET_BIT((__HANDLE__)->Instance->RQR, UART_RXDATA_FLUSH_REQUEST); \
+ SET_BIT((__HANDLE__)->Instance->RQR, UART_TXDATA_FLUSH_REQUEST); \
+ } while(0U)
+
+/** @brief Clear the specified UART pending flag.
+ * @param __HANDLE__ specifies the UART Handle.
+ * @param __FLAG__ specifies the flag to check.
+ * This parameter can be any combination of the following values:
+ * @arg @ref UART_CLEAR_PEF Parity Error Clear Flag
+ * @arg @ref UART_CLEAR_FEF Framing Error Clear Flag
+ * @arg @ref UART_CLEAR_NEF Noise detected Clear Flag
+ * @arg @ref UART_CLEAR_OREF Overrun Error Clear Flag
+ * @arg @ref UART_CLEAR_IDLEF IDLE line detected Clear Flag
+ * @arg @ref UART_CLEAR_TCF Transmission Complete Clear Flag
+ * @arg @ref UART_CLEAR_RTOF Receiver Timeout clear flag
+ * @arg @ref UART_CLEAR_LBDF LIN Break Detection Clear Flag
+ * @arg @ref UART_CLEAR_CTSF CTS Interrupt Clear Flag
+ * @arg @ref UART_CLEAR_CMF Character Match Clear Flag
+#if defined(USART_CR1_UESM)
+ * @arg @ref UART_CLEAR_WUF Wake Up from stop mode Clear Flag
+#endif
+ * @retval None
+ */
+#define __HAL_UART_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__))
+
+/** @brief Clear the UART PE pending flag.
+ * @param __HANDLE__ specifies the UART Handle.
+ * @retval None
+ */
+#define __HAL_UART_CLEAR_PEFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_PEF)
+
+/** @brief Clear the UART FE pending flag.
+ * @param __HANDLE__ specifies the UART Handle.
+ * @retval None
+ */
+#define __HAL_UART_CLEAR_FEFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_FEF)
+
+/** @brief Clear the UART NE pending flag.
+ * @param __HANDLE__ specifies the UART Handle.
+ * @retval None
+ */
+#define __HAL_UART_CLEAR_NEFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_NEF)
+
+/** @brief Clear the UART ORE pending flag.
+ * @param __HANDLE__ specifies the UART Handle.
+ * @retval None
+ */
+#define __HAL_UART_CLEAR_OREFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_OREF)
+
+/** @brief Clear the UART IDLE pending flag.
+ * @param __HANDLE__ specifies the UART Handle.
+ * @retval None
+ */
+#define __HAL_UART_CLEAR_IDLEFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_IDLEF)
+
+
+/** @brief Check whether the specified UART flag is set or not.
+ * @param __HANDLE__ specifies the UART Handle.
+ * @param __FLAG__ specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg @ref UART_FLAG_REACK Receive enable acknowledge flag
+ * @arg @ref UART_FLAG_TEACK Transmit enable acknowledge flag
+ #if defined(USART_CR1_UESM)
+ * @arg @ref UART_FLAG_WUF Wake up from stop mode flag
+ #endif
+ * @arg @ref UART_FLAG_RWU Receiver wake up flag (if the UART in mute mode)
+ * @arg @ref UART_FLAG_SBKF Send Break flag
+ * @arg @ref UART_FLAG_CMF Character match flag
+ * @arg @ref UART_FLAG_BUSY Busy flag
+ * @arg @ref UART_FLAG_ABRF Auto Baud rate detection flag
+ * @arg @ref UART_FLAG_ABRE Auto Baud rate detection error flag
+ * @arg @ref UART_FLAG_CTS CTS Change flag
+ * @arg @ref UART_FLAG_LBDF LIN Break detection flag
+ * @arg @ref UART_FLAG_TXE Transmit data register empty flag
+ * @arg @ref UART_FLAG_TC Transmission Complete flag
+ * @arg @ref UART_FLAG_RXNE Receive data register not empty flag
+ * @arg @ref UART_FLAG_RTOF Receiver Timeout flag
+ * @arg @ref UART_FLAG_IDLE Idle Line detection flag
+ * @arg @ref UART_FLAG_ORE Overrun Error flag
+ * @arg @ref UART_FLAG_NE Noise Error flag
+ * @arg @ref UART_FLAG_FE Framing Error flag
+ * @arg @ref UART_FLAG_PE Parity Error flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_UART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__))
+
+/** @brief Enable the specified UART interrupt.
+ * @param __HANDLE__ specifies the UART Handle.
+ * @param __INTERRUPT__ specifies the UART interrupt source to enable.
+ * This parameter can be one of the following values:
+#if defined(USART_CR1_UESM)
+ * @arg @ref UART_IT_WUF Wakeup from stop mode interrupt
+#endif
+ * @arg @ref UART_IT_CM Character match interrupt
+ * @arg @ref UART_IT_CTS CTS change interrupt
+ * @arg @ref UART_IT_LBD LIN Break detection interrupt
+ * @arg @ref UART_IT_TXE Transmit Data Register empty interrupt
+ * @arg @ref UART_IT_TC Transmission complete interrupt
+ * @arg @ref UART_IT_RXNE Receive Data register not empty interrupt
+ * @arg @ref UART_IT_RTO Receive Timeout interrupt
+ * @arg @ref UART_IT_IDLE Idle line detection interrupt
+ * @arg @ref UART_IT_PE Parity Error interrupt
+ * @arg @ref UART_IT_ERR Error interrupt (frame error, noise error, overrun error)
+ * @retval None
+ */
+#define __HAL_UART_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1U)? ((__HANDLE__)->Instance->CR1 |= (1U << ((__INTERRUPT__) & UART_IT_MASK))): \
+ ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2U)? ((__HANDLE__)->Instance->CR2 |= (1U << ((__INTERRUPT__) & UART_IT_MASK))): \
+ ((__HANDLE__)->Instance->CR3 |= (1U << ((__INTERRUPT__) & UART_IT_MASK))))
+
+
+/** @brief Disable the specified UART interrupt.
+ * @param __HANDLE__ specifies the UART Handle.
+ * @param __INTERRUPT__ specifies the UART interrupt source to disable.
+ * This parameter can be one of the following values:
+#if defined(USART_CR1_UESM)
+ * @arg @ref UART_IT_WUF Wakeup from stop mode interrupt
+#endif
+ * @arg @ref UART_IT_CM Character match interrupt
+ * @arg @ref UART_IT_CTS CTS change interrupt
+ * @arg @ref UART_IT_LBD LIN Break detection interrupt
+ * @arg @ref UART_IT_TXE Transmit Data Register empty interrupt
+ * @arg @ref UART_IT_TC Transmission complete interrupt
+ * @arg @ref UART_IT_RXNE Receive Data register not empty interrupt
+ * @arg @ref UART_IT_RTO Receive Timeout interrupt
+ * @arg @ref UART_IT_IDLE Idle line detection interrupt
+ * @arg @ref UART_IT_PE Parity Error interrupt
+ * @arg @ref UART_IT_ERR Error interrupt (Frame error, noise error, overrun error)
+ * @retval None
+ */
+#define __HAL_UART_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1U)? ((__HANDLE__)->Instance->CR1 &= ~ (1U << ((__INTERRUPT__) & UART_IT_MASK))): \
+ ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2U)? ((__HANDLE__)->Instance->CR2 &= ~ (1U << ((__INTERRUPT__) & UART_IT_MASK))): \
+ ((__HANDLE__)->Instance->CR3 &= ~ (1U << ((__INTERRUPT__) & UART_IT_MASK))))
+
+/** @brief Check whether the specified UART interrupt has occurred or not.
+ * @param __HANDLE__ specifies the UART Handle.
+ * @param __INTERRUPT__ specifies the UART interrupt to check.
+ * This parameter can be one of the following values:
+#if defined(USART_CR1_UESM)
+ * @arg @ref UART_IT_WUF Wakeup from stop mode interrupt
+#endif
+ * @arg @ref UART_IT_CM Character match interrupt
+ * @arg @ref UART_IT_CTS CTS change interrupt
+ * @arg @ref UART_IT_LBD LIN Break detection interrupt
+ * @arg @ref UART_IT_TXE Transmit Data Register empty interrupt
+ * @arg @ref UART_IT_TC Transmission complete interrupt
+ * @arg @ref UART_IT_RXNE Receive Data register not empty interrupt
+ * @arg @ref UART_IT_RTO Receive Timeout interrupt
+ * @arg @ref UART_IT_IDLE Idle line detection interrupt
+ * @arg @ref UART_IT_PE Parity Error interrupt
+ * @arg @ref UART_IT_ERR Error interrupt (Frame error, noise error, overrun error)
+ * @retval The new state of __INTERRUPT__ (SET or RESET).
+ */
+#define __HAL_UART_GET_IT(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->ISR\
+ & (1U << ((__INTERRUPT__)>> 8U))) != RESET) ? SET : RESET)
+
+/** @brief Check whether the specified UART interrupt source is enabled or not.
+ * @param __HANDLE__ specifies the UART Handle.
+ * @param __INTERRUPT__ specifies the UART interrupt source to check.
+ * This parameter can be one of the following values:
+#if defined(USART_CR1_UESM)
+ * @arg @ref UART_IT_WUF Wakeup from stop mode interrupt
+#endif
+ * @arg @ref UART_IT_CM Character match interrupt
+ * @arg @ref UART_IT_CTS CTS change interrupt
+ * @arg @ref UART_IT_LBD LIN Break detection interrupt
+ * @arg @ref UART_IT_TXE Transmit Data Register empty interrupt
+ * @arg @ref UART_IT_TC Transmission complete interrupt
+ * @arg @ref UART_IT_RXNE Receive Data register not empty interrupt
+ * @arg @ref UART_IT_RTO Receive Timeout interrupt
+ * @arg @ref UART_IT_IDLE Idle line detection interrupt
+ * @arg @ref UART_IT_PE Parity Error interrupt
+ * @arg @ref UART_IT_ERR Error interrupt (Frame error, noise error, overrun error)
+ * @retval The new state of __INTERRUPT__ (SET or RESET).
+ */
+#define __HAL_UART_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((((((uint8_t)(__INTERRUPT__)) >> 5U) == 1U) ? (__HANDLE__)->Instance->CR1 : \
+ (((((uint8_t)(__INTERRUPT__)) >> 5U) == 2U) ? (__HANDLE__)->Instance->CR2 : \
+ (__HANDLE__)->Instance->CR3)) & (1U << (((uint16_t)(__INTERRUPT__)) & UART_IT_MASK))) != RESET) ? SET : RESET)
+
+/** @brief Clear the specified UART ISR flag, in setting the proper ICR register flag.
+ * @param __HANDLE__ specifies the UART Handle.
+ * @param __IT_CLEAR__ specifies the interrupt clear register flag that needs to be set
+ * to clear the corresponding interrupt
+ * This parameter can be one of the following values:
+ * @arg @ref UART_CLEAR_PEF Parity Error Clear Flag
+ * @arg @ref UART_CLEAR_FEF Framing Error Clear Flag
+ * @arg @ref UART_CLEAR_NEF Noise detected Clear Flag
+ * @arg @ref UART_CLEAR_OREF Overrun Error Clear Flag
+ * @arg @ref UART_CLEAR_IDLEF IDLE line detected Clear Flag
+ * @arg @ref UART_CLEAR_RTOF Receiver timeout clear flag
+ * @arg @ref UART_CLEAR_TCF Transmission Complete Clear Flag
+ * @arg @ref UART_CLEAR_LBDF LIN Break Detection Clear Flag
+ * @arg @ref UART_CLEAR_CTSF CTS Interrupt Clear Flag
+ * @arg @ref UART_CLEAR_CMF Character Match Clear Flag
+ #if defined(USART_CR1_UESM)
+ * @arg @ref UART_CLEAR_WUF Wake Up from stop mode Clear Flag
+#endif
+ * @retval None
+ */
+#define __HAL_UART_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR = (uint32_t)(__IT_CLEAR__))
+
+/** @brief Set a specific UART request flag.
+ * @param __HANDLE__ specifies the UART Handle.
+ * @param __REQ__ specifies the request flag to set
+ * This parameter can be one of the following values:
+ * @arg @ref UART_AUTOBAUD_REQUEST Auto-Baud Rate Request
+ * @arg @ref UART_SENDBREAK_REQUEST Send Break Request
+ * @arg @ref UART_MUTE_MODE_REQUEST Mute Mode Request
+ * @arg @ref UART_RXDATA_FLUSH_REQUEST Receive Data flush Request
+ * @arg @ref UART_TXDATA_FLUSH_REQUEST Transmit data flush Request
+ * @retval None
+ */
+#define __HAL_UART_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint16_t)(__REQ__))
+
+/** @brief Enable the UART one bit sample method.
+ * @param __HANDLE__ specifies the UART Handle.
+ * @retval None
+ */
+#define __HAL_UART_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT)
+
+/** @brief Disable the UART one bit sample method.
+ * @param __HANDLE__ specifies the UART Handle.
+ * @retval None
+ */
+#define __HAL_UART_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= ~USART_CR3_ONEBIT)
+
+/** @brief Enable UART.
+ * @param __HANDLE__ specifies the UART Handle.
+ * @retval None
+ */
+#define __HAL_UART_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE)
+
+/** @brief Disable UART.
+ * @param __HANDLE__ specifies the UART Handle.
+ * @retval None
+ */
+#define __HAL_UART_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE)
+
+/** @brief Enable CTS flow control.
+ * @note This macro allows to enable CTS hardware flow control for a given UART instance,
+ * without need to call HAL_UART_Init() function.
+ * As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
+ * @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need
+ * for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
+ * - UART instance should have already been initialised (through call of HAL_UART_Init() )
+ * - macro could only be called when corresponding UART instance is disabled (i.e. __HAL_UART_DISABLE(__HANDLE__))
+ * and should be followed by an Enable macro (i.e. __HAL_UART_ENABLE(__HANDLE__)).
+ * @param __HANDLE__ specifies the UART Handle.
+ * @retval None
+ */
+#define __HAL_UART_HWCONTROL_CTS_ENABLE(__HANDLE__) \
+ do{ \
+ SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \
+ (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_CTSE; \
+ } while(0U)
+
+/** @brief Disable CTS flow control.
+ * @note This macro allows to disable CTS hardware flow control for a given UART instance,
+ * without need to call HAL_UART_Init() function.
+ * As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
+ * @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need
+ * for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
+ * - UART instance should have already been initialised (through call of HAL_UART_Init() )
+ * - macro could only be called when corresponding UART instance is disabled (i.e. __HAL_UART_DISABLE(__HANDLE__))
+ * and should be followed by an Enable macro (i.e. __HAL_UART_ENABLE(__HANDLE__)).
+ * @param __HANDLE__ specifies the UART Handle.
+ * @retval None
+ */
+#define __HAL_UART_HWCONTROL_CTS_DISABLE(__HANDLE__) \
+ do{ \
+ CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \
+ (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_CTSE); \
+ } while(0U)
+
+/** @brief Enable RTS flow control.
+ * @note This macro allows to enable RTS hardware flow control for a given UART instance,
+ * without need to call HAL_UART_Init() function.
+ * As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
+ * @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need
+ * for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
+ * - UART instance should have already been initialised (through call of HAL_UART_Init() )
+ * - macro could only be called when corresponding UART instance is disabled (i.e. __HAL_UART_DISABLE(__HANDLE__))
+ * and should be followed by an Enable macro (i.e. __HAL_UART_ENABLE(__HANDLE__)).
+ * @param __HANDLE__ specifies the UART Handle.
+ * @retval None
+ */
+#define __HAL_UART_HWCONTROL_RTS_ENABLE(__HANDLE__) \
+ do{ \
+ SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE); \
+ (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_RTSE; \
+ } while(0U)
+
+/** @brief Disable RTS flow control.
+ * @note This macro allows to disable RTS hardware flow control for a given UART instance,
+ * without need to call HAL_UART_Init() function.
+ * As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
+ * @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need
+ * for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
+ * - UART instance should have already been initialised (through call of HAL_UART_Init() )
+ * - macro could only be called when corresponding UART instance is disabled (i.e. __HAL_UART_DISABLE(__HANDLE__))
+ * and should be followed by an Enable macro (i.e. __HAL_UART_ENABLE(__HANDLE__)).
+ * @param __HANDLE__ specifies the UART Handle.
+ * @retval None
+ */
+#define __HAL_UART_HWCONTROL_RTS_DISABLE(__HANDLE__) \
+ do{ \
+ CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE);\
+ (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_RTSE); \
+ } while(0U)
+/**
+ * @}
+ */
+
+/* Private macros --------------------------------------------------------*/
+/** @defgroup UART_Private_Macros UART Private Macros
+ * @{
+ */
+
+
+/** @brief BRR division operation to set BRR register in 8-bit oversampling mode.
+ * @param __PCLK__ UART clock.
+ * @param __BAUD__ Baud rate set by the user.
+ * @retval Division result
+ */
+#define UART_DIV_SAMPLING8(__PCLK__, __BAUD__) ((((__PCLK__)*2U) + ((__BAUD__)/2U)) / (__BAUD__))
+
+/** @brief BRR division operation to set BRR register in 16-bit oversampling mode.
+ * @param __PCLK__ UART clock.
+ * @param __BAUD__ Baud rate set by the user.
+ * @retval Division result
+ */
+#define UART_DIV_SAMPLING16(__PCLK__, __BAUD__) (((__PCLK__) + ((__BAUD__)/2U)) / (__BAUD__))
+
+
+/** @brief Check UART Baud rate.
+ * @param __BAUDRATE__ Baudrate specified by the user.
+ * The maximum Baud Rate is derived from the maximum clock on F0 (i.e. 48 MHz)
+ * divided by the smallest oversampling used on the USART (i.e. 8)
+ * @retval SET (__BAUDRATE__ is valid) or RESET (__BAUDRATE__ is invalid)
+ */
+#define IS_UART_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) < 6000001U)
+
+/** @brief Check UART assertion time.
+ * @param __TIME__ 5-bit value assertion time.
+ * @retval Test result (TRUE or FALSE).
+ */
+#define IS_UART_ASSERTIONTIME(__TIME__) ((__TIME__) <= 0x1FU)
+
+/** @brief Check UART deassertion time.
+ * @param __TIME__ 5-bit value deassertion time.
+ * @retval Test result (TRUE or FALSE).
+ */
+#define IS_UART_DEASSERTIONTIME(__TIME__) ((__TIME__) <= 0x1FU)
+
+/**
+ * @brief Ensure that UART frame number of stop bits is valid.
+ * @param __STOPBITS__ UART frame number of stop bits.
+ * @retval SET (__STOPBITS__ is valid) or RESET (__STOPBITS__ is invalid)
+ */
+#define IS_UART_STOPBITS(__STOPBITS__) (((__STOPBITS__) == UART_STOPBITS_0_5) || \
+ ((__STOPBITS__) == UART_STOPBITS_1) || \
+ ((__STOPBITS__) == UART_STOPBITS_1_5) || \
+ ((__STOPBITS__) == UART_STOPBITS_2))
+
+
+/**
+ * @brief Ensure that UART frame parity is valid.
+ * @param __PARITY__ UART frame parity.
+ * @retval SET (__PARITY__ is valid) or RESET (__PARITY__ is invalid)
+ */
+#define IS_UART_PARITY(__PARITY__) (((__PARITY__) == UART_PARITY_NONE) || \
+ ((__PARITY__) == UART_PARITY_EVEN) || \
+ ((__PARITY__) == UART_PARITY_ODD))
+
+/**
+ * @brief Ensure that UART hardware flow control is valid.
+ * @param __CONTROL__ UART hardware flow control.
+ * @retval SET (__CONTROL__ is valid) or RESET (__CONTROL__ is invalid)
+ */
+#define IS_UART_HARDWARE_FLOW_CONTROL(__CONTROL__)\
+ (((__CONTROL__) == UART_HWCONTROL_NONE) || \
+ ((__CONTROL__) == UART_HWCONTROL_RTS) || \
+ ((__CONTROL__) == UART_HWCONTROL_CTS) || \
+ ((__CONTROL__) == UART_HWCONTROL_RTS_CTS))
+
+/**
+ * @brief Ensure that UART communication mode is valid.
+ * @param __MODE__ UART communication mode.
+ * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid)
+ */
+#define IS_UART_MODE(__MODE__) ((((__MODE__) & (~((uint32_t)(UART_MODE_TX_RX)))) == 0x00U) && ((__MODE__) != 0x00U))
+
+/**
+ * @brief Ensure that UART state is valid.
+ * @param __STATE__ UART state.
+ * @retval SET (__STATE__ is valid) or RESET (__STATE__ is invalid)
+ */
+#define IS_UART_STATE(__STATE__) (((__STATE__) == UART_STATE_DISABLE) || \
+ ((__STATE__) == UART_STATE_ENABLE))
+
+/**
+ * @brief Ensure that UART oversampling is valid.
+ * @param __SAMPLING__ UART oversampling.
+ * @retval SET (__SAMPLING__ is valid) or RESET (__SAMPLING__ is invalid)
+ */
+#define IS_UART_OVERSAMPLING(__SAMPLING__) (((__SAMPLING__) == UART_OVERSAMPLING_16) || \
+ ((__SAMPLING__) == UART_OVERSAMPLING_8))
+
+/**
+ * @brief Ensure that UART frame sampling is valid.
+ * @param __ONEBIT__ UART frame sampling.
+ * @retval SET (__ONEBIT__ is valid) or RESET (__ONEBIT__ is invalid)
+ */
+#define IS_UART_ONE_BIT_SAMPLE(__ONEBIT__) (((__ONEBIT__) == UART_ONE_BIT_SAMPLE_DISABLE) || \
+ ((__ONEBIT__) == UART_ONE_BIT_SAMPLE_ENABLE))
+
+/**
+ * @brief Ensure that UART auto Baud rate detection mode is valid.
+ * @param __MODE__ UART auto Baud rate detection mode.
+ * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid)
+ */
+#define IS_UART_ADVFEATURE_AUTOBAUDRATEMODE(__MODE__) (((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT) || \
+ ((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE) || \
+ ((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME) || \
+ ((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ON0X55FRAME))
+
+/**
+ * @brief Ensure that UART receiver timeout setting is valid.
+ * @param __TIMEOUT__ UART receiver timeout setting.
+ * @retval SET (__TIMEOUT__ is valid) or RESET (__TIMEOUT__ is invalid)
+ */
+#define IS_UART_RECEIVER_TIMEOUT(__TIMEOUT__) (((__TIMEOUT__) == UART_RECEIVER_TIMEOUT_DISABLE) || \
+ ((__TIMEOUT__) == UART_RECEIVER_TIMEOUT_ENABLE))
+
+/** @brief Check the receiver timeout value.
+ * @note The maximum UART receiver timeout value is 0xFFFFFF.
+ * @param __TIMEOUTVALUE__ receiver timeout value.
+ * @retval Test result (TRUE or FALSE)
+ */
+#define IS_UART_RECEIVER_TIMEOUT_VALUE(__TIMEOUTVALUE__) ((__TIMEOUTVALUE__) <= 0xFFFFFFU)
+
+/**
+ * @brief Ensure that UART LIN state is valid.
+ * @param __LIN__ UART LIN state.
+ * @retval SET (__LIN__ is valid) or RESET (__LIN__ is invalid)
+ */
+#define IS_UART_LIN(__LIN__) (((__LIN__) == UART_LIN_DISABLE) || \
+ ((__LIN__) == UART_LIN_ENABLE))
+
+/**
+ * @brief Ensure that UART LIN break detection length is valid.
+ * @param __LENGTH__ UART LIN break detection length.
+ * @retval SET (__LENGTH__ is valid) or RESET (__LENGTH__ is invalid)
+ */
+#define IS_UART_LIN_BREAK_DETECT_LENGTH(__LENGTH__) (((__LENGTH__) == UART_LINBREAKDETECTLENGTH_10B) || \
+ ((__LENGTH__) == UART_LINBREAKDETECTLENGTH_11B))
+
+/**
+ * @brief Ensure that UART DMA TX state is valid.
+ * @param __DMATX__ UART DMA TX state.
+ * @retval SET (__DMATX__ is valid) or RESET (__DMATX__ is invalid)
+ */
+#define IS_UART_DMA_TX(__DMATX__) (((__DMATX__) == UART_DMA_TX_DISABLE) || \
+ ((__DMATX__) == UART_DMA_TX_ENABLE))
+
+/**
+ * @brief Ensure that UART DMA RX state is valid.
+ * @param __DMARX__ UART DMA RX state.
+ * @retval SET (__DMARX__ is valid) or RESET (__DMARX__ is invalid)
+ */
+#define IS_UART_DMA_RX(__DMARX__) (((__DMARX__) == UART_DMA_RX_DISABLE) || \
+ ((__DMARX__) == UART_DMA_RX_ENABLE))
+
+/**
+ * @brief Ensure that UART half-duplex state is valid.
+ * @param __HDSEL__ UART half-duplex state.
+ * @retval SET (__HDSEL__ is valid) or RESET (__HDSEL__ is invalid)
+ */
+#define IS_UART_HALF_DUPLEX(__HDSEL__) (((__HDSEL__) == UART_HALF_DUPLEX_DISABLE) || \
+ ((__HDSEL__) == UART_HALF_DUPLEX_ENABLE))
+
+/**
+ * @brief Ensure that UART wake-up method is valid.
+ * @param __WAKEUP__ UART wake-up method .
+ * @retval SET (__WAKEUP__ is valid) or RESET (__WAKEUP__ is invalid)
+ */
+#define IS_UART_WAKEUPMETHOD(__WAKEUP__) (((__WAKEUP__) == UART_WAKEUPMETHOD_IDLELINE) || \
+ ((__WAKEUP__) == UART_WAKEUPMETHOD_ADDRESSMARK))
+
+/**
+ * @brief Ensure that UART request parameter is valid.
+ * @param __PARAM__ UART request parameter.
+ * @retval SET (__PARAM__ is valid) or RESET (__PARAM__ is invalid)
+ */
+#define IS_UART_REQUEST_PARAMETER(__PARAM__) (((__PARAM__) == UART_AUTOBAUD_REQUEST) || \
+ ((__PARAM__) == UART_SENDBREAK_REQUEST) || \
+ ((__PARAM__) == UART_MUTE_MODE_REQUEST) || \
+ ((__PARAM__) == UART_RXDATA_FLUSH_REQUEST) || \
+ ((__PARAM__) == UART_TXDATA_FLUSH_REQUEST))
+
+/**
+ * @brief Ensure that UART advanced features initialization is valid.
+ * @param __INIT__ UART advanced features initialization.
+ * @retval SET (__INIT__ is valid) or RESET (__INIT__ is invalid)
+ */
+#define IS_UART_ADVFEATURE_INIT(__INIT__) ((__INIT__) <= (UART_ADVFEATURE_NO_INIT | \
+ UART_ADVFEATURE_TXINVERT_INIT | \
+ UART_ADVFEATURE_RXINVERT_INIT | \
+ UART_ADVFEATURE_DATAINVERT_INIT | \
+ UART_ADVFEATURE_SWAP_INIT | \
+ UART_ADVFEATURE_RXOVERRUNDISABLE_INIT | \
+ UART_ADVFEATURE_DMADISABLEONERROR_INIT | \
+ UART_ADVFEATURE_AUTOBAUDRATE_INIT | \
+ UART_ADVFEATURE_MSBFIRST_INIT))
+
+/**
+ * @brief Ensure that UART frame TX inversion setting is valid.
+ * @param __TXINV__ UART frame TX inversion setting.
+ * @retval SET (__TXINV__ is valid) or RESET (__TXINV__ is invalid)
+ */
+#define IS_UART_ADVFEATURE_TXINV(__TXINV__) (((__TXINV__) == UART_ADVFEATURE_TXINV_DISABLE) || \
+ ((__TXINV__) == UART_ADVFEATURE_TXINV_ENABLE))
+
+/**
+ * @brief Ensure that UART frame RX inversion setting is valid.
+ * @param __RXINV__ UART frame RX inversion setting.
+ * @retval SET (__RXINV__ is valid) or RESET (__RXINV__ is invalid)
+ */
+#define IS_UART_ADVFEATURE_RXINV(__RXINV__) (((__RXINV__) == UART_ADVFEATURE_RXINV_DISABLE) || \
+ ((__RXINV__) == UART_ADVFEATURE_RXINV_ENABLE))
+
+/**
+ * @brief Ensure that UART frame data inversion setting is valid.
+ * @param __DATAINV__ UART frame data inversion setting.
+ * @retval SET (__DATAINV__ is valid) or RESET (__DATAINV__ is invalid)
+ */
+#define IS_UART_ADVFEATURE_DATAINV(__DATAINV__) (((__DATAINV__) == UART_ADVFEATURE_DATAINV_DISABLE) || \
+ ((__DATAINV__) == UART_ADVFEATURE_DATAINV_ENABLE))
+
+/**
+ * @brief Ensure that UART frame RX/TX pins swap setting is valid.
+ * @param __SWAP__ UART frame RX/TX pins swap setting.
+ * @retval SET (__SWAP__ is valid) or RESET (__SWAP__ is invalid)
+ */
+#define IS_UART_ADVFEATURE_SWAP(__SWAP__) (((__SWAP__) == UART_ADVFEATURE_SWAP_DISABLE) || \
+ ((__SWAP__) == UART_ADVFEATURE_SWAP_ENABLE))
+
+/**
+ * @brief Ensure that UART frame overrun setting is valid.
+ * @param __OVERRUN__ UART frame overrun setting.
+ * @retval SET (__OVERRUN__ is valid) or RESET (__OVERRUN__ is invalid)
+ */
+#define IS_UART_OVERRUN(__OVERRUN__) (((__OVERRUN__) == UART_ADVFEATURE_OVERRUN_ENABLE) || \
+ ((__OVERRUN__) == UART_ADVFEATURE_OVERRUN_DISABLE))
+
+/**
+ * @brief Ensure that UART auto Baud rate state is valid.
+ * @param __AUTOBAUDRATE__ UART auto Baud rate state.
+ * @retval SET (__AUTOBAUDRATE__ is valid) or RESET (__AUTOBAUDRATE__ is invalid)
+ */
+#define IS_UART_ADVFEATURE_AUTOBAUDRATE(__AUTOBAUDRATE__) (((__AUTOBAUDRATE__) == UART_ADVFEATURE_AUTOBAUDRATE_DISABLE) || \
+ ((__AUTOBAUDRATE__) == UART_ADVFEATURE_AUTOBAUDRATE_ENABLE))
+
+/**
+ * @brief Ensure that UART DMA enabling or disabling on error setting is valid.
+ * @param __DMA__ UART DMA enabling or disabling on error setting.
+ * @retval SET (__DMA__ is valid) or RESET (__DMA__ is invalid)
+ */
+#define IS_UART_ADVFEATURE_DMAONRXERROR(__DMA__) (((__DMA__) == UART_ADVFEATURE_DMA_ENABLEONRXERROR) || \
+ ((__DMA__) == UART_ADVFEATURE_DMA_DISABLEONRXERROR))
+
+/**
+ * @brief Ensure that UART frame MSB first setting is valid.
+ * @param __MSBFIRST__ UART frame MSB first setting.
+ * @retval SET (__MSBFIRST__ is valid) or RESET (__MSBFIRST__ is invalid)
+ */
+#define IS_UART_ADVFEATURE_MSBFIRST(__MSBFIRST__) (((__MSBFIRST__) == UART_ADVFEATURE_MSBFIRST_DISABLE) || \
+ ((__MSBFIRST__) == UART_ADVFEATURE_MSBFIRST_ENABLE))
+
+#if defined(USART_CR1_UESM)
+/**
+ * @brief Ensure that UART stop mode state is valid.
+ * @param __STOPMODE__ UART stop mode state.
+ * @retval SET (__STOPMODE__ is valid) or RESET (__STOPMODE__ is invalid)
+ */
+#define IS_UART_ADVFEATURE_STOPMODE(__STOPMODE__) (((__STOPMODE__) == UART_ADVFEATURE_STOPMODE_DISABLE) || \
+ ((__STOPMODE__) == UART_ADVFEATURE_STOPMODE_ENABLE))
+
+#endif /* USART_CR1_UESM */
+/**
+ * @brief Ensure that UART mute mode state is valid.
+ * @param __MUTE__ UART mute mode state.
+ * @retval SET (__MUTE__ is valid) or RESET (__MUTE__ is invalid)
+ */
+#define IS_UART_MUTE_MODE(__MUTE__) (((__MUTE__) == UART_ADVFEATURE_MUTEMODE_DISABLE) || \
+ ((__MUTE__) == UART_ADVFEATURE_MUTEMODE_ENABLE))
+#if defined(USART_CR1_UESM)
+
+/**
+ * @brief Ensure that UART wake-up selection is valid.
+ * @param __WAKE__ UART wake-up selection.
+ * @retval SET (__WAKE__ is valid) or RESET (__WAKE__ is invalid)
+ */
+#define IS_UART_WAKEUP_SELECTION(__WAKE__) (((__WAKE__) == UART_WAKEUP_ON_ADDRESS) || \
+ ((__WAKE__) == UART_WAKEUP_ON_STARTBIT) || \
+ ((__WAKE__) == UART_WAKEUP_ON_READDATA_NONEMPTY))
+#endif /* USART_CR1_UESM */
+
+/**
+ * @brief Ensure that UART driver enable polarity is valid.
+ * @param __POLARITY__ UART driver enable polarity.
+ * @retval SET (__POLARITY__ is valid) or RESET (__POLARITY__ is invalid)
+ */
+#define IS_UART_DE_POLARITY(__POLARITY__) (((__POLARITY__) == UART_DE_POLARITY_HIGH) || \
+ ((__POLARITY__) == UART_DE_POLARITY_LOW))
+
+
+/**
+ * @}
+ */
+
+/* Include UART HAL Extended module */
+#include "stm32f0xx_hal_uart_ex.h"
+
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup UART_Exported_Functions UART Exported Functions
+ * @{
+ */
+
+/** @addtogroup UART_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+
+/* Initialization and de-initialization functions ****************************/
+HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart);
+#if defined(USART_CR2_LINEN)
+HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength);
+#endif /* USART_CR2_LINEN */
+HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethod);
+HAL_StatusTypeDef HAL_UART_DeInit(UART_HandleTypeDef *huart);
+void HAL_UART_MspInit(UART_HandleTypeDef *huart);
+void HAL_UART_MspDeInit(UART_HandleTypeDef *huart);
+
+/* Callbacks Register/UnRegister functions ***********************************/
+#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
+HAL_StatusTypeDef HAL_UART_RegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID,
+ pUART_CallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_UART_UnRegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID);
+#endif /* USE_HAL_UART_REGISTER_CALLBACKS */
+
+/**
+ * @}
+ */
+
+/** @addtogroup UART_Exported_Functions_Group2 IO operation functions
+ * @{
+ */
+
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart);
+/* Transfer Abort functions */
+HAL_StatusTypeDef HAL_UART_Abort(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_UART_AbortTransmit(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_UART_AbortReceive(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_UART_Abort_IT(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_UART_AbortTransmit_IT(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_UART_AbortReceive_IT(UART_HandleTypeDef *huart);
+
+void HAL_UART_IRQHandler(UART_HandleTypeDef *huart);
+void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart);
+void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart);
+void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart);
+void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart);
+void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart);
+void HAL_UART_AbortCpltCallback(UART_HandleTypeDef *huart);
+void HAL_UART_AbortTransmitCpltCallback(UART_HandleTypeDef *huart);
+void HAL_UART_AbortReceiveCpltCallback(UART_HandleTypeDef *huart);
+
+/**
+ * @}
+ */
+
+/** @addtogroup UART_Exported_Functions_Group3 Peripheral Control functions
+ * @{
+ */
+
+/* Peripheral Control functions ************************************************/
+void HAL_UART_ReceiverTimeout_Config(UART_HandleTypeDef *huart, uint32_t TimeoutValue);
+HAL_StatusTypeDef HAL_UART_EnableReceiverTimeout(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_UART_DisableReceiverTimeout(UART_HandleTypeDef *huart);
+
+#if defined(USART_CR2_LINEN)
+HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart);
+#endif /* USART_CR2_LINEN */
+HAL_StatusTypeDef HAL_MultiProcessor_EnableMuteMode(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_MultiProcessor_DisableMuteMode(UART_HandleTypeDef *huart);
+void HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart);
+
+/**
+ * @}
+ */
+
+/** @addtogroup UART_Exported_Functions_Group4 Peripheral State and Error functions
+ * @{
+ */
+
+/* Peripheral State and Errors functions **************************************************/
+HAL_UART_StateTypeDef HAL_UART_GetState(UART_HandleTypeDef *huart);
+uint32_t HAL_UART_GetError(UART_HandleTypeDef *huart);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private functions -----------------------------------------------------------*/
+/** @addtogroup UART_Private_Functions UART Private Functions
+ * @{
+ */
+#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
+void UART_InitCallbacksToDefault(UART_HandleTypeDef *huart);
+#endif /* USE_HAL_UART_REGISTER_CALLBACKS */
+HAL_StatusTypeDef UART_SetConfig(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef UART_CheckIdleState(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status,
+ uint32_t Tickstart, uint32_t Timeout);
+void UART_AdvFeatureConfig(UART_HandleTypeDef *huart);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32F0xx_HAL_UART_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart_ex.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart_ex.h
new file mode 100644
index 0000000..60e8e14
--- /dev/null
+++ b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart_ex.h
@@ -0,0 +1,587 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_uart_ex.h
+ * @author MCD Application Team
+ * @brief Header file of UART HAL Extended module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32F0xx_HAL_UART_EX_H
+#define STM32F0xx_HAL_UART_EX_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup UARTEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup UARTEx_Exported_Types UARTEx Exported Types
+ * @{
+ */
+
+#if defined(USART_CR1_UESM)
+/**
+ * @brief UART wake up from stop mode parameters
+ */
+typedef struct
+{
+ uint32_t WakeUpEvent; /*!< Specifies which event will activate the Wakeup from Stop mode flag (WUF).
+ This parameter can be a value of @ref UART_WakeUp_from_Stop_Selection.
+ If set to UART_WAKEUP_ON_ADDRESS, the two other fields below must
+ be filled up. */
+
+ uint16_t AddressLength; /*!< Specifies whether the address is 4 or 7-bit long.
+ This parameter can be a value of @ref UARTEx_WakeUp_Address_Length. */
+
+ uint8_t Address; /*!< UART/USART node address (7-bit long max). */
+} UART_WakeUpTypeDef;
+
+#endif /* USART_CR1_UESM */
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup UARTEx_Exported_Constants UARTEx Exported Constants
+ * @{
+ */
+
+/** @defgroup UARTEx_Word_Length UARTEx Word Length
+ * @{
+ */
+#if defined(USART_CR1_M1)
+#define UART_WORDLENGTH_7B USART_CR1_M1 /*!< 7-bit long UART frame */
+#endif /* USART_CR1_M1 */
+#define UART_WORDLENGTH_8B 0x00000000U /*!< 8-bit long UART frame */
+#if defined (USART_CR1_M0)
+#define UART_WORDLENGTH_9B USART_CR1_M0 /*!< 9-bit long UART frame */
+#else
+#define UART_WORDLENGTH_9B USART_CR1_M /*!< 9-bit long UART frame */
+#endif /* USART_CR1_M0 */
+/**
+ * @}
+ */
+
+/** @defgroup UARTEx_WakeUp_Address_Length UARTEx WakeUp Address Length
+ * @{
+ */
+#define UART_ADDRESS_DETECT_4B 0x00000000U /*!< 4-bit long wake-up address */
+#define UART_ADDRESS_DETECT_7B USART_CR2_ADDM7 /*!< 7-bit long wake-up address */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup UARTEx_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup UARTEx_Exported_Functions_Group1
+ * @{
+ */
+
+/* Initialization and de-initialization functions ****************************/
+HAL_StatusTypeDef HAL_RS485Ex_Init(UART_HandleTypeDef *huart, uint32_t Polarity, uint32_t AssertionTime,
+ uint32_t DeassertionTime);
+
+/**
+ * @}
+ */
+
+/** @addtogroup UARTEx_Exported_Functions_Group2
+ * @{
+ */
+
+#if defined(USART_CR1_UESM)
+void HAL_UARTEx_WakeupCallback(UART_HandleTypeDef *huart);
+
+#endif /* USART_CR1_UESM */
+
+/**
+ * @}
+ */
+
+/** @addtogroup UARTEx_Exported_Functions_Group3
+ * @{
+ */
+
+/* Peripheral Control functions **********************************************/
+#if defined(USART_CR1_UESM)
+HAL_StatusTypeDef HAL_UARTEx_StopModeWakeUpSourceConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection);
+HAL_StatusTypeDef HAL_UARTEx_EnableStopMode(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_UARTEx_DisableStopMode(UART_HandleTypeDef *huart);
+
+#endif/* USART_CR1_UESM */
+HAL_StatusTypeDef HAL_MultiProcessorEx_AddressLength_Set(UART_HandleTypeDef *huart, uint32_t AddressLength);
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup UARTEx_Private_Macros UARTEx Private Macros
+ * @{
+ */
+
+/** @brief Report the UART clock source.
+ * @param __HANDLE__ specifies the UART Handle.
+ * @param __CLOCKSOURCE__ output variable.
+ * @retval UART clocking source, written in __CLOCKSOURCE__.
+ */
+
+#if defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx)
+#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } while(0)
+#elif defined (STM32F030x8) || defined (STM32F070x6) || defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F051x8) || defined (STM32F058xx)
+#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
+ } \
+ } while(0)
+#elif defined(STM32F070xB)
+#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART3) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART4) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
+ } \
+ } while(0)
+#elif defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)
+#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ switch(__HAL_RCC_GET_USART2_SOURCE()) \
+ { \
+ case RCC_USART2CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART2CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART2CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART2CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART3) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART4) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
+ } \
+ } while(0)
+#elif defined(STM32F091xC) || defined (STM32F098xx)
+#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ switch(__HAL_RCC_GET_USART2_SOURCE()) \
+ { \
+ case RCC_USART2CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART2CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART2CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART2CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART3) \
+ { \
+ switch(__HAL_RCC_GET_USART3_SOURCE()) \
+ { \
+ case RCC_USART3CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART3CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART3CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART3CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART4) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART5) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART6) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART7) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART8) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
+ } \
+ } while(0)
+#elif defined(STM32F030xC)
+#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART3) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART4) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART5) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART6) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
+ } \
+ } while(0)
+
+#endif /* defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx) */
+
+/** @brief Report the UART mask to apply to retrieve the received data
+ * according to the word length and to the parity bits activation.
+ * @note If PCE = 1, the parity bit is not included in the data extracted
+ * by the reception API().
+ * This masking operation is not carried out in the case of
+ * DMA transfers.
+ * @param __HANDLE__ specifies the UART Handle.
+ * @retval None, the mask to apply to UART RDR register is stored in (__HANDLE__)->Mask field.
+ */
+#if defined (USART_CR1_M1)
+#define UART_MASK_COMPUTATION(__HANDLE__) \
+ do { \
+ if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_9B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x01FFU ; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x00FFU ; \
+ } \
+ } \
+ else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_8B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x00FFU ; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x007FU ; \
+ } \
+ } \
+ else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_7B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x007FU ; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x003FU ; \
+ } \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x0000U; \
+ } \
+ } while(0U)
+
+#else
+#define UART_MASK_COMPUTATION(__HANDLE__) \
+ do { \
+ if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_9B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x01FFU ; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x00FFU ; \
+ } \
+ } \
+ else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_8B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x00FFU ; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x007FU ; \
+ } \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x0000U; \
+ } \
+ } while(0U)
+
+#endif /* USART_CR1_M1 */
+
+/**
+ * @brief Ensure that UART frame length is valid.
+ * @param __LENGTH__ UART frame length.
+ * @retval SET (__LENGTH__ is valid) or RESET (__LENGTH__ is invalid)
+ */
+#if defined (USART_CR1_M1)
+#define IS_UART_WORD_LENGTH(__LENGTH__) (((__LENGTH__) == UART_WORDLENGTH_7B) || \
+ ((__LENGTH__) == UART_WORDLENGTH_8B) || \
+ ((__LENGTH__) == UART_WORDLENGTH_9B))
+#else
+#define IS_UART_WORD_LENGTH(__LENGTH__) (((__LENGTH__) == UART_WORDLENGTH_8B) || \
+ ((__LENGTH__) == UART_WORDLENGTH_9B))
+#endif /* USART_CR1_M1 */
+
+/**
+ * @brief Ensure that UART wake-up address length is valid.
+ * @param __ADDRESS__ UART wake-up address length.
+ * @retval SET (__ADDRESS__ is valid) or RESET (__ADDRESS__ is invalid)
+ */
+#define IS_UART_ADDRESSLENGTH_DETECT(__ADDRESS__) (((__ADDRESS__) == UART_ADDRESS_DETECT_4B) || \
+ ((__ADDRESS__) == UART_ADDRESS_DETECT_7B))
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32F0xx_HAL_UART_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_usart.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_usart.h
new file mode 100644
index 0000000..44e9910
--- /dev/null
+++ b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_usart.h
@@ -0,0 +1,794 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_usart.h
+ * @author MCD Application Team
+ * @brief Header file of USART HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32F0xx_HAL_USART_H
+#define STM32F0xx_HAL_USART_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup USART
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup USART_Exported_Types USART Exported Types
+ * @{
+ */
+
+/**
+ * @brief USART Init Structure definition
+ */
+typedef struct
+{
+ uint32_t BaudRate; /*!< This member configures the Usart communication baud rate.
+ The baud rate is computed using the following formula:
+ Baud Rate Register[15:4] = ((2 * fclk_pres) / ((huart->Init.BaudRate)))[15:4]
+ Baud Rate Register[3] = 0
+ Baud Rate Register[2:0] = (((2 * fclk_pres) / ((huart->Init.BaudRate)))[3:0]) >> 1
+ where fclk_pres is the USART input clock frequency
+ @note Oversampling by 8 is systematically applied to achieve high baud rates. */
+
+ uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
+ This parameter can be a value of @ref USARTEx_Word_Length. */
+
+ uint32_t StopBits; /*!< Specifies the number of stop bits transmitted.
+ This parameter can be a value of @ref USART_Stop_Bits. */
+
+ uint32_t Parity; /*!< Specifies the parity mode.
+ This parameter can be a value of @ref USART_Parity
+ @note When parity is enabled, the computed parity is inserted
+ at the MSB position of the transmitted data (9th bit when
+ the word length is set to 9 data bits; 8th bit when the
+ word length is set to 8 data bits). */
+
+ uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled.
+ This parameter can be a value of @ref USART_Mode. */
+
+ uint32_t CLKPolarity; /*!< Specifies the steady state of the serial clock.
+ This parameter can be a value of @ref USART_Clock_Polarity. */
+
+ uint32_t CLKPhase; /*!< Specifies the clock transition on which the bit capture is made.
+ This parameter can be a value of @ref USART_Clock_Phase. */
+
+ uint32_t CLKLastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted
+ data bit (MSB) has to be output on the SCLK pin in synchronous mode.
+ This parameter can be a value of @ref USART_Last_Bit. */
+
+} USART_InitTypeDef;
+
+/**
+ * @brief HAL USART State structures definition
+ */
+typedef enum
+{
+ HAL_USART_STATE_RESET = 0x00U, /*!< Peripheral is not initialized */
+ HAL_USART_STATE_READY = 0x01U, /*!< Peripheral Initialized and ready for use */
+ HAL_USART_STATE_BUSY = 0x02U, /*!< an internal process is ongoing */
+ HAL_USART_STATE_BUSY_TX = 0x12U, /*!< Data Transmission process is ongoing */
+ HAL_USART_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing */
+ HAL_USART_STATE_BUSY_TX_RX = 0x32U, /*!< Data Transmission Reception process is ongoing */
+ HAL_USART_STATE_TIMEOUT = 0x03U, /*!< Timeout state */
+ HAL_USART_STATE_ERROR = 0x04U /*!< Error */
+} HAL_USART_StateTypeDef;
+
+/**
+ * @brief USART clock sources definitions
+ */
+typedef enum
+{
+ USART_CLOCKSOURCE_PCLK1 = 0x00U, /*!< PCLK1 clock source */
+ USART_CLOCKSOURCE_HSI = 0x02U, /*!< HSI clock source */
+ USART_CLOCKSOURCE_SYSCLK = 0x04U, /*!< SYSCLK clock source */
+ USART_CLOCKSOURCE_LSE = 0x08U, /*!< LSE clock source */
+ USART_CLOCKSOURCE_UNDEFINED = 0x10U /*!< Undefined clock source */
+} USART_ClockSourceTypeDef;
+
+/**
+ * @brief USART handle Structure definition
+ */
+typedef struct __USART_HandleTypeDef
+{
+ USART_TypeDef *Instance; /*!< USART registers base address */
+
+ USART_InitTypeDef Init; /*!< USART communication parameters */
+
+ uint8_t *pTxBuffPtr; /*!< Pointer to USART Tx transfer Buffer */
+
+ uint16_t TxXferSize; /*!< USART Tx Transfer size */
+
+ __IO uint16_t TxXferCount; /*!< USART Tx Transfer Counter */
+
+ uint8_t *pRxBuffPtr; /*!< Pointer to USART Rx transfer Buffer */
+
+ uint16_t RxXferSize; /*!< USART Rx Transfer size */
+
+ __IO uint16_t RxXferCount; /*!< USART Rx Transfer Counter */
+
+ uint16_t Mask; /*!< USART Rx RDR register mask */
+
+ void (*RxISR)(struct __USART_HandleTypeDef *husart); /*!< Function pointer on Rx IRQ handler */
+
+ void (*TxISR)(struct __USART_HandleTypeDef *husart); /*!< Function pointer on Tx IRQ handler */
+
+ DMA_HandleTypeDef *hdmatx; /*!< USART Tx DMA Handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /*!< USART Rx DMA Handle parameters */
+
+ HAL_LockTypeDef Lock; /*!< Locking object */
+
+ __IO HAL_USART_StateTypeDef State; /*!< USART communication state */
+
+ __IO uint32_t ErrorCode; /*!< USART Error code */
+
+#if (USE_HAL_USART_REGISTER_CALLBACKS == 1)
+ void (* TxHalfCpltCallback)(struct __USART_HandleTypeDef *husart); /*!< USART Tx Half Complete Callback */
+ void (* TxCpltCallback)(struct __USART_HandleTypeDef *husart); /*!< USART Tx Complete Callback */
+ void (* RxHalfCpltCallback)(struct __USART_HandleTypeDef *husart); /*!< USART Rx Half Complete Callback */
+ void (* RxCpltCallback)(struct __USART_HandleTypeDef *husart); /*!< USART Rx Complete Callback */
+ void (* TxRxCpltCallback)(struct __USART_HandleTypeDef *husart); /*!< USART Tx Rx Complete Callback */
+ void (* ErrorCallback)(struct __USART_HandleTypeDef *husart); /*!< USART Error Callback */
+ void (* AbortCpltCallback)(struct __USART_HandleTypeDef *husart); /*!< USART Abort Complete Callback */
+
+ void (* MspInitCallback)(struct __USART_HandleTypeDef *husart); /*!< USART Msp Init callback */
+ void (* MspDeInitCallback)(struct __USART_HandleTypeDef *husart); /*!< USART Msp DeInit callback */
+#endif /* USE_HAL_USART_REGISTER_CALLBACKS */
+
+} USART_HandleTypeDef;
+
+#if (USE_HAL_USART_REGISTER_CALLBACKS == 1)
+/**
+ * @brief HAL USART Callback ID enumeration definition
+ */
+typedef enum
+{
+ HAL_USART_TX_HALFCOMPLETE_CB_ID = 0x00U, /*!< USART Tx Half Complete Callback ID */
+ HAL_USART_TX_COMPLETE_CB_ID = 0x01U, /*!< USART Tx Complete Callback ID */
+ HAL_USART_RX_HALFCOMPLETE_CB_ID = 0x02U, /*!< USART Rx Half Complete Callback ID */
+ HAL_USART_RX_COMPLETE_CB_ID = 0x03U, /*!< USART Rx Complete Callback ID */
+ HAL_USART_TX_RX_COMPLETE_CB_ID = 0x04U, /*!< USART Tx Rx Complete Callback ID */
+ HAL_USART_ERROR_CB_ID = 0x05U, /*!< USART Error Callback ID */
+ HAL_USART_ABORT_COMPLETE_CB_ID = 0x06U, /*!< USART Abort Complete Callback ID */
+
+ HAL_USART_MSPINIT_CB_ID = 0x09U, /*!< USART MspInit callback ID */
+ HAL_USART_MSPDEINIT_CB_ID = 0x0AU /*!< USART MspDeInit callback ID */
+
+} HAL_USART_CallbackIDTypeDef;
+
+/**
+ * @brief HAL USART Callback pointer definition
+ */
+typedef void (*pUSART_CallbackTypeDef)(USART_HandleTypeDef *husart); /*!< pointer to an USART callback function */
+
+#endif /* USE_HAL_USART_REGISTER_CALLBACKS */
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup USART_Exported_Constants USART Exported Constants
+ * @{
+ */
+
+/** @defgroup USART_Error_Definition USART Error Definition
+ * @{
+ */
+#define HAL_USART_ERROR_NONE ((uint32_t)0x00000000U) /*!< No error */
+#define HAL_USART_ERROR_PE ((uint32_t)0x00000001U) /*!< Parity error */
+#define HAL_USART_ERROR_NE ((uint32_t)0x00000002U) /*!< Noise error */
+#define HAL_USART_ERROR_FE ((uint32_t)0x00000004U) /*!< Frame error */
+#define HAL_USART_ERROR_ORE ((uint32_t)0x00000008U) /*!< Overrun error */
+#define HAL_USART_ERROR_DMA ((uint32_t)0x00000010U) /*!< DMA transfer error */
+#if (USE_HAL_USART_REGISTER_CALLBACKS == 1)
+#define HAL_USART_ERROR_INVALID_CALLBACK ((uint32_t)0x00000040U) /*!< Invalid Callback error */
+#endif /* USE_HAL_USART_REGISTER_CALLBACKS */
+/**
+ * @}
+ */
+
+/** @defgroup USART_Stop_Bits USART Number of Stop Bits
+ * @{
+ */
+#if defined(USART_SMARTCARD_SUPPORT)
+#define USART_STOPBITS_0_5 USART_CR2_STOP_0 /*!< USART frame with 0.5 stop bit */
+#define USART_STOPBITS_1 0x00000000U /*!< USART frame with 1 stop bit */
+#define USART_STOPBITS_1_5 (USART_CR2_STOP_0 | USART_CR2_STOP_1) /*!< USART frame with 1.5 stop bits */
+#define USART_STOPBITS_2 USART_CR2_STOP_1 /*!< USART frame with 2 stop bits */
+#else
+#define USART_STOPBITS_1 (0x00000000U) /*!< USART frame with 1 stop bit */
+#define USART_STOPBITS_2 ((uint32_t)USART_CR2_STOP_1) /*!< USART frame with 2 stop bits */
+#endif /* USART_SMARTCARD_SUPPORT */
+/**
+ * @}
+ */
+
+/** @defgroup USART_Parity USART Parity
+ * @{
+ */
+#define USART_PARITY_NONE 0x00000000U /*!< No parity */
+#define USART_PARITY_EVEN USART_CR1_PCE /*!< Even parity */
+#define USART_PARITY_ODD (USART_CR1_PCE | USART_CR1_PS) /*!< Odd parity */
+/**
+ * @}
+ */
+
+/** @defgroup USART_Mode USART Mode
+ * @{
+ */
+#define USART_MODE_RX USART_CR1_RE /*!< RX mode */
+#define USART_MODE_TX USART_CR1_TE /*!< TX mode */
+#define USART_MODE_TX_RX (USART_CR1_TE |USART_CR1_RE) /*!< RX and TX mode */
+/**
+ * @}
+ */
+
+/** @defgroup USART_Over_Sampling USART Over Sampling
+ * @{
+ */
+#define USART_OVERSAMPLING_16 0x00000000U /*!< Oversampling by 16 */
+#define USART_OVERSAMPLING_8 USART_CR1_OVER8 /*!< Oversampling by 8 */
+/**
+ * @}
+ */
+
+/** @defgroup USART_Clock USART Clock
+ * @{
+ */
+#define USART_CLOCK_DISABLE 0x00000000U /*!< USART clock disable */
+#define USART_CLOCK_ENABLE USART_CR2_CLKEN /*!< USART clock enable */
+/**
+ * @}
+ */
+
+/** @defgroup USART_Clock_Polarity USART Clock Polarity
+ * @{
+ */
+#define USART_POLARITY_LOW 0x00000000U /*!< Driver enable signal is active high */
+#define USART_POLARITY_HIGH USART_CR2_CPOL /*!< Driver enable signal is active low */
+/**
+ * @}
+ */
+
+/** @defgroup USART_Clock_Phase USART Clock Phase
+ * @{
+ */
+#define USART_PHASE_1EDGE 0x00000000U /*!< USART frame phase on first clock transition */
+#define USART_PHASE_2EDGE USART_CR2_CPHA /*!< USART frame phase on second clock transition */
+/**
+ * @}
+ */
+
+/** @defgroup USART_Last_Bit USART Last Bit
+ * @{
+ */
+#define USART_LASTBIT_DISABLE 0x00000000U /*!< USART frame last data bit clock pulse not output to SCLK pin */
+#define USART_LASTBIT_ENABLE USART_CR2_LBCL /*!< USART frame last data bit clock pulse output to SCLK pin */
+/**
+ * @}
+ */
+
+
+/** @defgroup USART_Request_Parameters USART Request Parameters
+ * @{
+ */
+#define USART_RXDATA_FLUSH_REQUEST USART_RQR_RXFRQ /*!< Receive Data flush Request */
+#if defined(USART_RQR_TXFRQ)
+#define USART_TXDATA_FLUSH_REQUEST USART_RQR_TXFRQ /*!< Transmit data flush Request */
+#endif /* USART_RQR_TXFRQ */
+/**
+ * @}
+ */
+
+/** @defgroup USART_Flags USART Flags
+ * Elements values convention: 0xXXXX
+ * - 0xXXXX : Flag mask in the ISR register
+ * @{
+ */
+#define USART_FLAG_REACK USART_ISR_REACK /*!< USART receive enable acknowledge flag */
+#define USART_FLAG_TEACK USART_ISR_TEACK /*!< USART transmit enable acknowledge flag */
+#define USART_FLAG_BUSY USART_ISR_BUSY /*!< USART busy flag */
+#define USART_FLAG_TXE USART_ISR_TXE /*!< USART transmit data register empty */
+#define USART_FLAG_TC USART_ISR_TC /*!< USART transmission complete */
+#define USART_FLAG_RXNE USART_ISR_RXNE /*!< USART read data register not empty */
+#define USART_FLAG_IDLE USART_ISR_IDLE /*!< USART idle flag */
+#define USART_FLAG_ORE USART_ISR_ORE /*!< USART overrun error */
+#define USART_FLAG_NE USART_ISR_NE /*!< USART noise error */
+#define USART_FLAG_FE USART_ISR_FE /*!< USART frame error */
+#define USART_FLAG_PE USART_ISR_PE /*!< USART parity error */
+/**
+ * @}
+ */
+
+/** @defgroup USART_Interrupt_definition USART Interrupts Definition
+ * Elements values convention: 0000ZZZZ0XXYYYYYb
+ * - YYYYY : Interrupt source position in the XX register (5bits)
+ * - XX : Interrupt source register (2bits)
+ * - 01: CR1 register
+ * - 10: CR2 register
+ * - 11: CR3 register
+ * - ZZZZ : Flag position in the ISR register(4bits)
+ * @{
+ */
+
+#define USART_IT_PE 0x0028U /*!< USART parity error interruption */
+#define USART_IT_TXE 0x0727U /*!< USART transmit data register empty interruption */
+#define USART_IT_TC 0x0626U /*!< USART transmission complete interruption */
+#define USART_IT_RXNE 0x0525U /*!< USART read data register not empty interruption */
+#define USART_IT_IDLE 0x0424U /*!< USART idle interruption */
+#define USART_IT_ERR 0x0060U /*!< USART error interruption */
+#define USART_IT_ORE 0x0300U /*!< USART overrun error interruption */
+#define USART_IT_NE 0x0200U /*!< USART noise error interruption */
+#define USART_IT_FE 0x0100U /*!< USART frame error interruption */
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_IT_CLEAR_Flags USART Interruption Clear Flags
+ * @{
+ */
+#define USART_CLEAR_PEF USART_ICR_PECF /*!< Parity Error Clear Flag */
+#define USART_CLEAR_FEF USART_ICR_FECF /*!< Framing Error Clear Flag */
+#define USART_CLEAR_NEF USART_ICR_NCF /*!< Noise Error detected Clear Flag */
+#define USART_CLEAR_OREF USART_ICR_ORECF /*!< OverRun Error Clear Flag */
+#define USART_CLEAR_IDLEF USART_ICR_IDLECF /*!< IDLE line detected Clear Flag */
+#define USART_CLEAR_TCF USART_ICR_TCCF /*!< Transmission Complete Clear Flag */
+#define USART_CLEAR_CTSF USART_ICR_CTSCF /*!< CTS Interrupt Clear Flag */
+/**
+ * @}
+ */
+
+/** @defgroup USART_Interruption_Mask USART Interruption Flags Mask
+ * @{
+ */
+#define USART_IT_MASK 0x001FU /*!< USART interruptions flags mask */
+#define USART_CR_MASK 0x00E0U /*!< USART control register mask */
+#define USART_CR_POS 5U /*!< USART control register position */
+#define USART_ISR_MASK 0x1F00U /*!< USART ISR register mask */
+#define USART_ISR_POS 8U /*!< USART ISR register position */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup USART_Exported_Macros USART Exported Macros
+ * @{
+ */
+
+/** @brief Reset USART handle state.
+ * @param __HANDLE__ USART handle.
+ * @retval None
+ */
+#if (USE_HAL_USART_REGISTER_CALLBACKS == 1)
+#define __HAL_USART_RESET_HANDLE_STATE(__HANDLE__) do{ \
+ (__HANDLE__)->State = HAL_USART_STATE_RESET; \
+ (__HANDLE__)->MspInitCallback = NULL; \
+ (__HANDLE__)->MspDeInitCallback = NULL; \
+ } while(0U)
+#else
+#define __HAL_USART_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_USART_STATE_RESET)
+#endif /* USE_HAL_USART_REGISTER_CALLBACKS */
+
+/** @brief Check whether the specified USART flag is set or not.
+ * @param __HANDLE__ specifies the USART Handle
+ * @param __FLAG__ specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg @ref USART_FLAG_REACK Receive enable acknowledge flag
+ * @arg @ref USART_FLAG_TEACK Transmit enable acknowledge flag
+ * @arg @ref USART_FLAG_BUSY Busy flag
+ * @arg @ref USART_FLAG_CTS CTS Change flag
+ * @arg @ref USART_FLAG_TXE Transmit data register empty flag
+ * @arg @ref USART_FLAG_TC Transmission Complete flag
+ * @arg @ref USART_FLAG_RXNE Receive data register not empty flag
+ * @arg @ref USART_FLAG_IDLE Idle Line detection flag
+ * @arg @ref USART_FLAG_ORE OverRun Error flag
+ * @arg @ref USART_FLAG_NE Noise Error flag
+ * @arg @ref USART_FLAG_FE Framing Error flag
+ * @arg @ref USART_FLAG_PE Parity Error flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_USART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clear the specified USART pending flag.
+ * @param __HANDLE__ specifies the USART Handle.
+ * @param __FLAG__ specifies the flag to check.
+ * This parameter can be any combination of the following values:
+ * @arg @ref USART_CLEAR_PEF Parity Error Clear Flag
+ * @arg @ref USART_CLEAR_FEF Framing Error Clear Flag
+ * @arg @ref USART_CLEAR_NEF Noise detected Clear Flag
+ * @arg @ref USART_CLEAR_OREF Overrun Error Clear Flag
+ * @arg @ref USART_CLEAR_IDLEF IDLE line detected Clear Flag
+ * @arg @ref USART_CLEAR_TCF Transmission Complete Clear Flag
+ * @arg @ref USART_CLEAR_CTSF
+ * @retval None
+ */
+#define __HAL_USART_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__))
+
+/** @brief Clear the USART PE pending flag.
+ * @param __HANDLE__ specifies the USART Handle.
+ * @retval None
+ */
+#define __HAL_USART_CLEAR_PEFLAG(__HANDLE__) __HAL_USART_CLEAR_FLAG((__HANDLE__), USART_CLEAR_PEF)
+
+/** @brief Clear the USART FE pending flag.
+ * @param __HANDLE__ specifies the USART Handle.
+ * @retval None
+ */
+#define __HAL_USART_CLEAR_FEFLAG(__HANDLE__) __HAL_USART_CLEAR_FLAG((__HANDLE__), USART_CLEAR_FEF)
+
+/** @brief Clear the USART NE pending flag.
+ * @param __HANDLE__ specifies the USART Handle.
+ * @retval None
+ */
+#define __HAL_USART_CLEAR_NEFLAG(__HANDLE__) __HAL_USART_CLEAR_FLAG((__HANDLE__), USART_CLEAR_NEF)
+
+/** @brief Clear the USART ORE pending flag.
+ * @param __HANDLE__ specifies the USART Handle.
+ * @retval None
+ */
+#define __HAL_USART_CLEAR_OREFLAG(__HANDLE__) __HAL_USART_CLEAR_FLAG((__HANDLE__), USART_CLEAR_OREF)
+
+/** @brief Clear the USART IDLE pending flag.
+ * @param __HANDLE__ specifies the USART Handle.
+ * @retval None
+ */
+#define __HAL_USART_CLEAR_IDLEFLAG(__HANDLE__) __HAL_USART_CLEAR_FLAG((__HANDLE__), USART_CLEAR_IDLEF)
+
+
+
+/** @brief Enable the specified USART interrupt.
+ * @param __HANDLE__ specifies the USART Handle.
+ * @param __INTERRUPT__ specifies the USART interrupt source to enable.
+ * This parameter can be one of the following values:
+ * @arg @ref USART_IT_TXE Transmit Data Register empty interrupt
+ * @arg @ref USART_IT_TC Transmission complete interrupt
+ * @arg @ref USART_IT_RXNE Receive Data register not empty interrupt
+ * @arg @ref USART_IT_IDLE Idle line detection interrupt
+ * @arg @ref USART_IT_PE Parity Error interrupt
+ * @arg @ref USART_IT_ERR Error interrupt(Frame error, noise error, overrun error)
+ * @retval None
+ */
+#define __HAL_USART_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((((__INTERRUPT__) & USART_CR_MASK) >> USART_CR_POS) == 1U)? ((__HANDLE__)->Instance->CR1 |= ((uint32_t)1U << ((__INTERRUPT__) & USART_IT_MASK))): \
+ ((((__INTERRUPT__) & USART_CR_MASK) >> USART_CR_POS) == 2U)? ((__HANDLE__)->Instance->CR2 |= ((uint32_t)1U << ((__INTERRUPT__) & USART_IT_MASK))): \
+ ((__HANDLE__)->Instance->CR3 |= ((uint32_t)1U << ((__INTERRUPT__) & USART_IT_MASK))))
+
+/** @brief Disable the specified USART interrupt.
+ * @param __HANDLE__ specifies the USART Handle.
+ * @param __INTERRUPT__ specifies the USART interrupt source to disable.
+ * This parameter can be one of the following values:
+ * @arg @ref USART_IT_TXE Transmit Data Register empty interrupt
+ * @arg @ref USART_IT_TC Transmission complete interrupt
+ * @arg @ref USART_IT_RXNE Receive Data register not empty interrupt
+ * @arg @ref USART_IT_IDLE Idle line detection interrupt
+ * @arg @ref USART_IT_PE Parity Error interrupt
+ * @arg @ref USART_IT_ERR Error interrupt(Frame error, noise error, overrun error)
+ * @retval None
+ */
+#define __HAL_USART_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((((__INTERRUPT__) & USART_CR_MASK) >> USART_CR_POS) == 1U)? ((__HANDLE__)->Instance->CR1 &= ~ ((uint32_t)1U << ((__INTERRUPT__) & USART_IT_MASK))): \
+ ((((__INTERRUPT__) & USART_CR_MASK) >> USART_CR_POS) == 2U)? ((__HANDLE__)->Instance->CR2 &= ~ ((uint32_t)1U << ((__INTERRUPT__) & USART_IT_MASK))): \
+ ((__HANDLE__)->Instance->CR3 &= ~ ((uint32_t)1U << ((__INTERRUPT__) & USART_IT_MASK))))
+
+
+/** @brief Check whether the specified USART interrupt has occurred or not.
+ * @param __HANDLE__ specifies the USART Handle.
+ * @param __INTERRUPT__ specifies the USART interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg @ref USART_IT_TXE Transmit Data Register empty interrupt
+ * @arg @ref USART_IT_TC Transmission complete interrupt
+ * @arg @ref USART_IT_RXNE Receive Data register not empty interrupt
+ * @arg @ref USART_IT_IDLE Idle line detection interrupt
+ * @arg @ref USART_IT_ORE OverRun Error interrupt
+ * @arg @ref USART_IT_NE Noise Error interrupt
+ * @arg @ref USART_IT_FE Framing Error interrupt
+ * @arg @ref USART_IT_PE Parity Error interrupt
+ * @retval The new state of __INTERRUPT__ (SET or RESET).
+ */
+#define __HAL_USART_GET_IT(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->ISR\
+ & ((uint32_t)0x01U << (((__INTERRUPT__) & USART_ISR_MASK)>> USART_ISR_POS))) != 0U) ? SET : RESET)
+
+/** @brief Check whether the specified USART interrupt source is enabled or not.
+ * @param __HANDLE__ specifies the USART Handle.
+ * @param __INTERRUPT__ specifies the USART interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg @ref USART_IT_TXE Transmit Data Register empty interrupt
+ * @arg @ref USART_IT_TC Transmission complete interrupt
+ * @arg @ref USART_IT_RXNE Receive Data register not empty interrupt
+ * @arg @ref USART_IT_IDLE Idle line detection interrupt
+ * @arg @ref USART_IT_ORE OverRun Error interrupt
+ * @arg @ref USART_IT_NE Noise Error interrupt
+ * @arg @ref USART_IT_FE Framing Error interrupt
+ * @arg @ref USART_IT_PE Parity Error interrupt
+ * @retval The new state of __INTERRUPT__ (SET or RESET).
+ */
+#define __HAL_USART_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((((((uint8_t)(__INTERRUPT__)) >> 0x05U) == 0x01U) ? (__HANDLE__)->Instance->CR1 : \
+ (((((uint8_t)(__INTERRUPT__)) >> 0x05U) == 0x02U) ? (__HANDLE__)->Instance->CR2 : \
+ (__HANDLE__)->Instance->CR3)) & (0x01U << (((uint16_t)(__INTERRUPT__)) & USART_IT_MASK))) != 0U) ? SET : RESET)
+
+
+/** @brief Clear the specified USART ISR flag, in setting the proper ICR register flag.
+ * @param __HANDLE__ specifies the USART Handle.
+ * @param __IT_CLEAR__ specifies the interrupt clear register flag that needs to be set
+ * to clear the corresponding interrupt.
+ * This parameter can be one of the following values:
+ * @arg @ref USART_CLEAR_PEF Parity Error Clear Flag
+ * @arg @ref USART_CLEAR_FEF Framing Error Clear Flag
+ * @arg @ref USART_CLEAR_NEF Noise detected Clear Flag
+ * @arg @ref USART_CLEAR_OREF Overrun Error Clear Flag
+ * @arg @ref USART_CLEAR_IDLEF IDLE line detected Clear Flag
+ * @arg @ref USART_CLEAR_TCF Transmission Complete Clear Flag
+ * @retval None
+ */
+#define __HAL_USART_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR = (uint32_t)(__IT_CLEAR__))
+
+/** @brief Set a specific USART request flag.
+ * @param __HANDLE__ specifies the USART Handle.
+ * @param __REQ__ specifies the request flag to set.
+ * This parameter can be one of the following values:
+ * @arg @ref USART_RXDATA_FLUSH_REQUEST Receive Data flush Request
+#if defined(USART_RQR_TXFRQ)
+ * @arg @ref USART_TXDATA_FLUSH_REQUEST Transmit data flush Request
+#endif
+ *
+ * @retval None
+ */
+#define __HAL_USART_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint16_t)(__REQ__))
+
+/** @brief Enable the USART one bit sample method.
+ * @param __HANDLE__ specifies the USART Handle.
+ * @retval None
+ */
+#define __HAL_USART_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT)
+
+/** @brief Disable the USART one bit sample method.
+ * @param __HANDLE__ specifies the USART Handle.
+ * @retval None
+ */
+#define __HAL_USART_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= ~USART_CR3_ONEBIT)
+
+/** @brief Enable USART.
+ * @param __HANDLE__ specifies the USART Handle.
+ * @retval None
+ */
+#define __HAL_USART_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE)
+
+/** @brief Disable USART.
+ * @param __HANDLE__ specifies the USART Handle.
+ * @retval None
+ */
+#define __HAL_USART_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE)
+
+/**
+ * @}
+ */
+
+/* Private macros --------------------------------------------------------*/
+/** @defgroup USART_Private_Macros USART Private Macros
+ * @{
+ */
+
+/** @brief BRR division operation to set BRR register in 8-bit oversampling mode.
+ * @param __PCLK__ USART clock.
+ * @param __BAUD__ Baud rate set by the user.
+ * @retval Division result
+ */
+#define USART_DIV_SAMPLING8(__PCLK__, __BAUD__) ((((__PCLK__)*2U) + ((__BAUD__)/2U)) / (__BAUD__))
+
+/** @brief Check USART Baud rate.
+ * @param __BAUDRATE__ Baudrate specified by the user.
+ * The maximum Baud Rate is derived from the maximum clock on F0 (i.e. 48 MHz)
+ * divided by the smallest oversampling used on the USART (i.e. 8)
+ * @retval SET (__BAUDRATE__ is valid) or RESET (__BAUDRATE__ is invalid) */
+#define IS_USART_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) <= 6000000U)
+
+/**
+ * @brief Ensure that USART frame number of stop bits is valid.
+ * @param __STOPBITS__ USART frame number of stop bits.
+ * @retval SET (__STOPBITS__ is valid) or RESET (__STOPBITS__ is invalid)
+ */
+#if defined(USART_SMARTCARD_SUPPORT)
+#define IS_USART_STOPBITS(__STOPBITS__) (((__STOPBITS__) == USART_STOPBITS_0_5) || \
+ ((__STOPBITS__) == USART_STOPBITS_1) || \
+ ((__STOPBITS__) == USART_STOPBITS_1_5) || \
+ ((__STOPBITS__) == USART_STOPBITS_2))
+#else
+#define IS_USART_STOPBITS(__STOPBITS__) (((__STOPBITS__) == USART_STOPBITS_1) || \
+ ((__STOPBITS__) == USART_STOPBITS_2))
+#endif /* USART_SMARTCARD_SUPPORT */
+
+/**
+ * @brief Ensure that USART frame parity is valid.
+ * @param __PARITY__ USART frame parity.
+ * @retval SET (__PARITY__ is valid) or RESET (__PARITY__ is invalid)
+ */
+#define IS_USART_PARITY(__PARITY__) (((__PARITY__) == USART_PARITY_NONE) || \
+ ((__PARITY__) == USART_PARITY_EVEN) || \
+ ((__PARITY__) == USART_PARITY_ODD))
+
+/**
+ * @brief Ensure that USART communication mode is valid.
+ * @param __MODE__ USART communication mode.
+ * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid)
+ */
+#define IS_USART_MODE(__MODE__) ((((__MODE__) & 0xFFFFFFF3U) == 0x00U) && ((__MODE__) != 0x00U))
+
+/**
+ * @brief Ensure that USART oversampling is valid.
+ * @param __SAMPLING__ USART oversampling.
+ * @retval SET (__SAMPLING__ is valid) or RESET (__SAMPLING__ is invalid)
+ */
+#define IS_USART_OVERSAMPLING(__SAMPLING__) (((__SAMPLING__) == USART_OVERSAMPLING_16) || \
+ ((__SAMPLING__) == USART_OVERSAMPLING_8))
+
+/**
+ * @brief Ensure that USART clock state is valid.
+ * @param __CLOCK__ USART clock state.
+ * @retval SET (__CLOCK__ is valid) or RESET (__CLOCK__ is invalid)
+ */
+#define IS_USART_CLOCK(__CLOCK__) (((__CLOCK__) == USART_CLOCK_DISABLE) || \
+ ((__CLOCK__) == USART_CLOCK_ENABLE))
+
+/**
+ * @brief Ensure that USART frame polarity is valid.
+ * @param __CPOL__ USART frame polarity.
+ * @retval SET (__CPOL__ is valid) or RESET (__CPOL__ is invalid)
+ */
+#define IS_USART_POLARITY(__CPOL__) (((__CPOL__) == USART_POLARITY_LOW) || ((__CPOL__) == USART_POLARITY_HIGH))
+
+/**
+ * @brief Ensure that USART frame phase is valid.
+ * @param __CPHA__ USART frame phase.
+ * @retval SET (__CPHA__ is valid) or RESET (__CPHA__ is invalid)
+ */
+#define IS_USART_PHASE(__CPHA__) (((__CPHA__) == USART_PHASE_1EDGE) || ((__CPHA__) == USART_PHASE_2EDGE))
+
+/**
+ * @brief Ensure that USART frame last bit clock pulse setting is valid.
+ * @param __LASTBIT__ USART frame last bit clock pulse setting.
+ * @retval SET (__LASTBIT__ is valid) or RESET (__LASTBIT__ is invalid)
+ */
+#define IS_USART_LASTBIT(__LASTBIT__) (((__LASTBIT__) == USART_LASTBIT_DISABLE) || \
+ ((__LASTBIT__) == USART_LASTBIT_ENABLE))
+
+/**
+ * @brief Ensure that USART request parameter is valid.
+ * @param __PARAM__ USART request parameter.
+ * @retval SET (__PARAM__ is valid) or RESET (__PARAM__ is invalid)
+ */
+#if defined(USART_RQR_TXFRQ)
+#define IS_USART_REQUEST_PARAMETER(__PARAM__) (((__PARAM__) == USART_RXDATA_FLUSH_REQUEST) || \
+ ((__PARAM__) == USART_TXDATA_FLUSH_REQUEST))
+#else
+#define IS_USART_REQUEST_PARAMETER(__PARAM__) ((__PARAM__) == USART_RXDATA_FLUSH_REQUEST)
+#endif /* USART_RQR_TXFRQ */
+
+/**
+ * @}
+ */
+
+/* Include USART HAL Extended module */
+#include "stm32f0xx_hal_usart_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup USART_Exported_Functions USART Exported Functions
+ * @{
+ */
+
+/** @addtogroup USART_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+
+/* Initialization and de-initialization functions ****************************/
+HAL_StatusTypeDef HAL_USART_Init(USART_HandleTypeDef *husart);
+HAL_StatusTypeDef HAL_USART_DeInit(USART_HandleTypeDef *husart);
+void HAL_USART_MspInit(USART_HandleTypeDef *husart);
+void HAL_USART_MspDeInit(USART_HandleTypeDef *husart);
+
+/* Callbacks Register/UnRegister functions ***********************************/
+#if (USE_HAL_USART_REGISTER_CALLBACKS == 1)
+HAL_StatusTypeDef HAL_USART_RegisterCallback(USART_HandleTypeDef *husart, HAL_USART_CallbackIDTypeDef CallbackID,
+ pUSART_CallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_USART_UnRegisterCallback(USART_HandleTypeDef *husart, HAL_USART_CallbackIDTypeDef CallbackID);
+#endif /* USE_HAL_USART_REGISTER_CALLBACKS */
+
+/**
+ * @}
+ */
+
+/** @addtogroup USART_Exported_Functions_Group2 IO operation functions
+ * @{
+ */
+
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_USART_Transmit(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_USART_Receive(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_USART_TransmitReceive(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData,
+ uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_USART_Transmit_IT(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size);
+HAL_StatusTypeDef HAL_USART_Receive_IT(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size);
+HAL_StatusTypeDef HAL_USART_TransmitReceive_IT(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData,
+ uint16_t Size);
+HAL_StatusTypeDef HAL_USART_Transmit_DMA(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size);
+HAL_StatusTypeDef HAL_USART_Receive_DMA(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size);
+HAL_StatusTypeDef HAL_USART_TransmitReceive_DMA(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData,
+ uint16_t Size);
+HAL_StatusTypeDef HAL_USART_DMAPause(USART_HandleTypeDef *husart);
+HAL_StatusTypeDef HAL_USART_DMAResume(USART_HandleTypeDef *husart);
+HAL_StatusTypeDef HAL_USART_DMAStop(USART_HandleTypeDef *husart);
+/* Transfer Abort functions */
+HAL_StatusTypeDef HAL_USART_Abort(USART_HandleTypeDef *husart);
+HAL_StatusTypeDef HAL_USART_Abort_IT(USART_HandleTypeDef *husart);
+
+void HAL_USART_IRQHandler(USART_HandleTypeDef *husart);
+void HAL_USART_TxHalfCpltCallback(USART_HandleTypeDef *husart);
+void HAL_USART_TxCpltCallback(USART_HandleTypeDef *husart);
+void HAL_USART_RxCpltCallback(USART_HandleTypeDef *husart);
+void HAL_USART_RxHalfCpltCallback(USART_HandleTypeDef *husart);
+void HAL_USART_TxRxCpltCallback(USART_HandleTypeDef *husart);
+void HAL_USART_ErrorCallback(USART_HandleTypeDef *husart);
+void HAL_USART_AbortCpltCallback(USART_HandleTypeDef *husart);
+
+/**
+ * @}
+ */
+
+/** @addtogroup USART_Exported_Functions_Group4 Peripheral State and Error functions
+ * @{
+ */
+
+/* Peripheral State and Error functions ***************************************/
+HAL_USART_StateTypeDef HAL_USART_GetState(USART_HandleTypeDef *husart);
+uint32_t HAL_USART_GetError(USART_HandleTypeDef *husart);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32F0xx_HAL_USART_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_usart_ex.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_usart_ex.h
new file mode 100644
index 0000000..b289d92
--- /dev/null
+++ b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_usart_ex.h
@@ -0,0 +1,520 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_usart_ex.h
+ * @author MCD Application Team
+ * @brief Header file of USART HAL Extended module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32F0xx_HAL_USART_EX_H
+#define STM32F0xx_HAL_USART_EX_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup USARTEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup USARTEx_Exported_Constants USARTEx Exported Constants
+ * @{
+ */
+
+/** @defgroup USARTEx_Word_Length USARTEx Word Length
+ * @{
+ */
+#if defined(USART_CR1_M0)&& defined(USART_CR1_M1)
+#define USART_WORDLENGTH_7B ((uint32_t)USART_CR1_M1) /*!< 7-bit long USART frame */
+#define USART_WORDLENGTH_8B (0x00000000U) /*!< 8-bit long USART frame */
+#define USART_WORDLENGTH_9B ((uint32_t)USART_CR1_M0) /*!< 9-bit long USART frame */
+#elif defined(USART_CR1_M)
+#define USART_WORDLENGTH_8B (0x00000000U) /*!< 8-bit long USART frame */
+#define USART_WORDLENGTH_9B ((uint32_t)USART_CR1_M) /*!< 9-bit long USART frame */
+#endif
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup USARTEx_Private_Macros USARTEx Private Macros
+ * @{
+ */
+
+/** @brief Report the USART clock source.
+ * @param __HANDLE__ specifies the USART Handle.
+ * @param __CLOCKSOURCE__ output variable.
+ * @retval the USART clocking source, written in __CLOCKSOURCE__.
+ */
+/** @brief Report the UART clock source.
+ * @param __HANDLE__ specifies the UART Handle.
+ * @param __CLOCKSOURCE__ output variable.
+ * @retval UART clocking source, written in __CLOCKSOURCE__.
+ */
+
+#if defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx)
+#define USART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } while(0)
+#elif defined (STM32F030x8) || defined (STM32F070x6) || defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F051x8) || defined (STM32F058xx)
+#define USART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ } \
+ else \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \
+ } \
+ } while(0)
+#elif defined (STM32F070xB)
+#define USART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART3) \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART4) \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ } \
+ else \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \
+ } \
+ } while(0)
+#elif defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)
+#define USART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ switch(__HAL_RCC_GET_USART2_SOURCE()) \
+ { \
+ case RCC_USART2CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART2CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART2CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART2CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART3) \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART4) \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ } \
+ else \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \
+ } \
+ } while(0)
+#elif defined(STM32F091xC) || defined (STM32F098xx)
+#define USART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ switch(__HAL_RCC_GET_USART2_SOURCE()) \
+ { \
+ case RCC_USART2CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART2CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART2CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART2CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART3) \
+ { \
+ switch(__HAL_RCC_GET_USART3_SOURCE()) \
+ { \
+ case RCC_USART3CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART3CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART3CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART3CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART4) \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART5) \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART6) \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART7) \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART8) \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ } \
+ else \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \
+ } \
+ } while(0)
+#elif defined(STM32F030xC)
+#define USART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART3) \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART4) \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART5) \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART6) \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ } \
+ else \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \
+ } \
+ } while(0)
+#endif /* defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx) */
+/** @brief Compute the USART mask to apply to retrieve the received data
+ * according to the word length and to the parity bits activation.
+ * @note If PCE = 1, the parity bit is not included in the data extracted
+ * by the reception API().
+ * This masking operation is not carried out in the case of
+ * DMA transfers.
+ * @param __HANDLE__ specifies the USART Handle.
+ * @retval None, the mask to apply to USART RDR register is stored in (__HANDLE__)->Mask field.
+ */
+#if defined(USART_CR1_M0)&& defined(USART_CR1_M1)
+#define USART_MASK_COMPUTATION(__HANDLE__) \
+ do { \
+ if ((__HANDLE__)->Init.WordLength == USART_WORDLENGTH_9B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == USART_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x01FFU; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x00FFU; \
+ } \
+ } \
+ else if ((__HANDLE__)->Init.WordLength == USART_WORDLENGTH_8B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == USART_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x00FFU; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x007FU; \
+ } \
+ } \
+ else if ((__HANDLE__)->Init.WordLength == USART_WORDLENGTH_7B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == USART_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x007FU; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x003FU; \
+ } \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x0000U; \
+ } \
+ } while(0U)
+#elif defined(USART_CR1_M)
+#define USART_MASK_COMPUTATION(__HANDLE__) \
+ do { \
+ if ((__HANDLE__)->Init.WordLength == USART_WORDLENGTH_9B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == USART_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x01FFU; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x00FFU; \
+ } \
+ } \
+ else if ((__HANDLE__)->Init.WordLength == USART_WORDLENGTH_8B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == USART_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x00FFU; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x007FU; \
+ } \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x0000U; \
+ } \
+ } while(0U)
+#endif
+
+/**
+ * @brief Ensure that USART frame length is valid.
+ * @param __LENGTH__ USART frame length.
+ * @retval SET (__LENGTH__ is valid) or RESET (__LENGTH__ is invalid)
+ */
+#if defined(USART_CR1_M0)&& defined(USART_CR1_M1)
+#define IS_USART_WORD_LENGTH(__LENGTH__) (((__LENGTH__) == USART_WORDLENGTH_7B) || \
+ ((__LENGTH__) == USART_WORDLENGTH_8B) || \
+ ((__LENGTH__) == USART_WORDLENGTH_9B))
+#elif defined(USART_CR1_M)
+#define IS_USART_WORD_LENGTH(__LENGTH__) (((__LENGTH__) == USART_WORDLENGTH_8B) || \
+ ((__LENGTH__) == USART_WORDLENGTH_9B))
+#endif
+
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup USARTEx_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup USARTEx_Exported_Functions_Group1
+ * @{
+ */
+
+/* IO operation functions *****************************************************/
+
+/**
+ * @}
+ */
+
+/** @addtogroup USARTEx_Exported_Functions_Group2
+ * @{
+ */
+
+/* Peripheral Control functions ***********************************************/
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32F0xx_HAL_USART_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_wwdg.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_wwdg.h
new file mode 100644
index 0000000..3fb606e
--- /dev/null
+++ b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_wwdg.h
@@ -0,0 +1,300 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_wwdg.h
+ * @author MCD Application Team
+ * @brief Header file of WWDG HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32F0xx_HAL_WWDG_H
+#define STM32F0xx_HAL_WWDG_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup WWDG
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup WWDG_Exported_Types WWDG Exported Types
+ * @{
+ */
+
+/**
+ * @brief WWDG Init structure definition
+ */
+typedef struct
+{
+ uint32_t Prescaler; /*!< Specifies the prescaler value of the WWDG.
+ This parameter can be a value of @ref WWDG_Prescaler */
+
+ uint32_t Window; /*!< Specifies the WWDG window value to be compared to the downcounter.
+ This parameter must be a number Min_Data = 0x40 and Max_Data = 0x7F */
+
+ uint32_t Counter; /*!< Specifies the WWDG free-running downcounter value.
+ This parameter must be a number between Min_Data = 0x40 and Max_Data = 0x7F */
+
+ uint32_t EWIMode ; /*!< Specifies if WWDG Early Wakeup Interupt is enable or not.
+ This parameter can be a value of @ref WWDG_EWI_Mode */
+
+} WWDG_InitTypeDef;
+
+/**
+ * @brief WWDG handle Structure definition
+ */
+#if (USE_HAL_WWDG_REGISTER_CALLBACKS == 1)
+typedef struct __WWDG_HandleTypeDef
+#else
+typedef struct
+#endif
+{
+ WWDG_TypeDef *Instance; /*!< Register base address */
+
+ WWDG_InitTypeDef Init; /*!< WWDG required parameters */
+
+#if (USE_HAL_WWDG_REGISTER_CALLBACKS == 1)
+ void (* EwiCallback)(struct __WWDG_HandleTypeDef *hwwdg); /*!< WWDG Early WakeUp Interrupt callback */
+
+ void (* MspInitCallback)(struct __WWDG_HandleTypeDef *hwwdg); /*!< WWDG Msp Init callback */
+#endif
+} WWDG_HandleTypeDef;
+
+#if (USE_HAL_WWDG_REGISTER_CALLBACKS == 1)
+/**
+ * @brief HAL WWDG common Callback ID enumeration definition
+ */
+typedef enum
+{
+ HAL_WWDG_EWI_CB_ID = 0x00u, /*!< WWDG EWI callback ID */
+ HAL_WWDG_MSPINIT_CB_ID = 0x01u, /*!< WWDG MspInit callback ID */
+} HAL_WWDG_CallbackIDTypeDef;
+
+/**
+ * @brief HAL WWDG Callback pointer definition
+ */
+typedef void (*pWWDG_CallbackTypeDef)(WWDG_HandleTypeDef *hppp); /*!< pointer to a WWDG common callback functions */
+
+#endif
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup WWDG_Exported_Constants WWDG Exported Constants
+ * @{
+ */
+
+/** @defgroup WWDG_Interrupt_definition WWDG Interrupt definition
+ * @{
+ */
+#define WWDG_IT_EWI WWDG_CFR_EWI /*!< Early wakeup interrupt */
+/**
+ * @}
+ */
+
+/** @defgroup WWDG_Flag_definition WWDG Flag definition
+ * @brief WWDG Flag definition
+ * @{
+ */
+#define WWDG_FLAG_EWIF WWDG_SR_EWIF /*!< Early wakeup interrupt flag */
+/**
+ * @}
+ */
+
+/** @defgroup WWDG_Prescaler WWDG Prescaler
+ * @{
+ */
+#define WWDG_PRESCALER_1 0x00000000u /*!< WWDG counter clock = (PCLK1/4096)/1 */
+#define WWDG_PRESCALER_2 WWDG_CFR_WDGTB_0 /*!< WWDG counter clock = (PCLK1/4096)/2 */
+#define WWDG_PRESCALER_4 WWDG_CFR_WDGTB_1 /*!< WWDG counter clock = (PCLK1/4096)/4 */
+#define WWDG_PRESCALER_8 (WWDG_CFR_WDGTB_1 | WWDG_CFR_WDGTB_0) /*!< WWDG counter clock = (PCLK1/4096)/8 */
+/**
+ * @}
+ */
+
+/** @defgroup WWDG_EWI_Mode WWDG Early Wakeup Interrupt Mode
+ * @{
+ */
+#define WWDG_EWI_DISABLE 0x00000000u /*!< EWI Disable */
+#define WWDG_EWI_ENABLE WWDG_CFR_EWI /*!< EWI Enable */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+
+/** @defgroup WWDG_Private_Macros WWDG Private Macros
+ * @{
+ */
+#define IS_WWDG_PRESCALER(__PRESCALER__) (((__PRESCALER__) == WWDG_PRESCALER_1) || \
+ ((__PRESCALER__) == WWDG_PRESCALER_2) || \
+ ((__PRESCALER__) == WWDG_PRESCALER_4) || \
+ ((__PRESCALER__) == WWDG_PRESCALER_8))
+
+#define IS_WWDG_WINDOW(__WINDOW__) (((__WINDOW__) >= WWDG_CFR_W_6) && ((__WINDOW__) <= WWDG_CFR_W))
+
+#define IS_WWDG_COUNTER(__COUNTER__) (((__COUNTER__) >= WWDG_CR_T_6) && ((__COUNTER__) <= WWDG_CR_T))
+
+#define IS_WWDG_EWI_MODE(__MODE__) (((__MODE__) == WWDG_EWI_ENABLE) || \
+ ((__MODE__) == WWDG_EWI_DISABLE))
+/**
+ * @}
+ */
+
+
+/* Exported macros ------------------------------------------------------------*/
+
+/** @defgroup WWDG_Exported_Macros WWDG Exported Macros
+ * @{
+ */
+
+/**
+ * @brief Enable the WWDG peripheral.
+ * @param __HANDLE__ WWDG handle
+ * @retval None
+ */
+#define __HAL_WWDG_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR, WWDG_CR_WDGA)
+
+/**
+ * @brief Enable the WWDG early wakeup interrupt.
+ * @param __HANDLE__: WWDG handle
+ * @param __INTERRUPT__ specifies the interrupt to enable.
+ * This parameter can be one of the following values:
+ * @arg WWDG_IT_EWI: Early wakeup interrupt
+ * @note Once enabled this interrupt cannot be disabled except by a system reset.
+ * @retval None
+ */
+#define __HAL_WWDG_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT((__HANDLE__)->Instance->CFR, (__INTERRUPT__))
+
+/**
+ * @brief Check whether the selected WWDG interrupt has occurred or not.
+ * @param __HANDLE__ WWDG handle
+ * @param __INTERRUPT__ specifies the it to check.
+ * This parameter can be one of the following values:
+ * @arg WWDG_FLAG_EWIF: Early wakeup interrupt IT
+ * @retval The new state of WWDG_FLAG (SET or RESET).
+ */
+#define __HAL_WWDG_GET_IT(__HANDLE__, __INTERRUPT__) __HAL_WWDG_GET_FLAG((__HANDLE__),(__INTERRUPT__))
+
+/** @brief Clear the WWDG interrupt pending bits.
+ * bits to clear the selected interrupt pending bits.
+ * @param __HANDLE__ WWDG handle
+ * @param __INTERRUPT__ specifies the interrupt pending bit to clear.
+ * This parameter can be one of the following values:
+ * @arg WWDG_FLAG_EWIF: Early wakeup interrupt flag
+ */
+#define __HAL_WWDG_CLEAR_IT(__HANDLE__, __INTERRUPT__) __HAL_WWDG_CLEAR_FLAG((__HANDLE__), (__INTERRUPT__))
+
+/**
+ * @brief Check whether the specified WWDG flag is set or not.
+ * @param __HANDLE__ WWDG handle
+ * @param __FLAG__ specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg WWDG_FLAG_EWIF: Early wakeup interrupt flag
+ * @retval The new state of WWDG_FLAG (SET or RESET).
+ */
+#define __HAL_WWDG_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
+
+/**
+ * @brief Clear the WWDG's pending flags.
+ * @param __HANDLE__ WWDG handle
+ * @param __FLAG__ specifies the flag to clear.
+ * This parameter can be one of the following values:
+ * @arg WWDG_FLAG_EWIF: Early wakeup interrupt flag
+ * @retval None
+ */
+#define __HAL_WWDG_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__))
+
+/** @brief Check whether the specified WWDG interrupt source is enabled or not.
+ * @param __HANDLE__ WWDG Handle.
+ * @param __INTERRUPT__ specifies the WWDG interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg WWDG_IT_EWI: Early Wakeup Interrupt
+ * @retval state of __INTERRUPT__ (TRUE or FALSE).
+ */
+#define __HAL_WWDG_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CFR\
+ & (__INTERRUPT__)) == (__INTERRUPT__))
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup WWDG_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup WWDG_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_WWDG_Init(WWDG_HandleTypeDef *hwwdg);
+void HAL_WWDG_MspInit(WWDG_HandleTypeDef *hwwdg);
+/* Callbacks Register/UnRegister functions ***********************************/
+#if (USE_HAL_WWDG_REGISTER_CALLBACKS == 1)
+HAL_StatusTypeDef HAL_WWDG_RegisterCallback(WWDG_HandleTypeDef *hwwdg, HAL_WWDG_CallbackIDTypeDef CallbackID, pWWDG_CallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_WWDG_UnRegisterCallback(WWDG_HandleTypeDef *hwwdg, HAL_WWDG_CallbackIDTypeDef CallbackID);
+#endif
+
+/**
+ * @}
+ */
+
+/** @addtogroup WWDG_Exported_Functions_Group2
+ * @{
+ */
+/* I/O operation functions ******************************************************/
+HAL_StatusTypeDef HAL_WWDG_Refresh(WWDG_HandleTypeDef *hwwdg);
+void HAL_WWDG_IRQHandler(WWDG_HandleTypeDef *hwwdg);
+void HAL_WWDG_EarlyWakeupCallback(WWDG_HandleTypeDef *hwwdg);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32F0xx_HAL_WWDG_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_adc.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_adc.h
new file mode 100644
index 0000000..76570a3
--- /dev/null
+++ b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_adc.h
@@ -0,0 +1,3408 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_ll_adc.h
+ * @author MCD Application Team
+ * @brief Header file of ADC LL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_LL_ADC_H
+#define __STM32F0xx_LL_ADC_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx.h"
+
+/** @addtogroup STM32F0xx_LL_Driver
+ * @{
+ */
+
+#if defined (ADC1)
+
+/** @defgroup ADC_LL ADC
+ * @{
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup ADC_LL_Private_Constants ADC Private Constants
+ * @{
+ */
+
+/* Internal mask for ADC group regular trigger: */
+/* To select into literal LL_ADC_REG_TRIG_x the relevant bits for: */
+/* - regular trigger source */
+/* - regular trigger edge */
+#define ADC_REG_TRIG_EXT_EDGE_DEFAULT (ADC_CFGR1_EXTEN_0) /* Trigger edge set to rising edge (default setting for compatibility with some ADC on other STM32 families having this setting set by HW default value) */
+
+/* Mask containing trigger source masks for each of possible */
+/* trigger edge selection duplicated with shifts [0; 4; 8; 12] */
+/* corresponding to {SW start; ext trigger; ext trigger; ext trigger}. */
+#define ADC_REG_TRIG_SOURCE_MASK (((LL_ADC_REG_TRIG_SOFTWARE & ADC_CFGR1_EXTSEL) << (4U * 0U)) | \
+ ((ADC_CFGR1_EXTSEL) << (4U * 1U)) | \
+ ((ADC_CFGR1_EXTSEL) << (4U * 2U)) | \
+ ((ADC_CFGR1_EXTSEL) << (4U * 3U)) )
+
+/* Mask containing trigger edge masks for each of possible */
+/* trigger edge selection duplicated with shifts [0; 4; 8; 12] */
+/* corresponding to {SW start; ext trigger; ext trigger; ext trigger}. */
+#define ADC_REG_TRIG_EDGE_MASK (((LL_ADC_REG_TRIG_SOFTWARE & ADC_CFGR1_EXTEN) << (4U * 0U)) | \
+ ((ADC_REG_TRIG_EXT_EDGE_DEFAULT) << (4U * 1U)) | \
+ ((ADC_REG_TRIG_EXT_EDGE_DEFAULT) << (4U * 2U)) | \
+ ((ADC_REG_TRIG_EXT_EDGE_DEFAULT) << (4U * 3U)) )
+
+/* Definition of ADC group regular trigger bits information. */
+#define ADC_REG_TRIG_EXTSEL_BITOFFSET_POS ( 6U) /* Value equivalent to POSITION_VAL(ADC_CFGR1_EXTSEL) */
+#define ADC_REG_TRIG_EXTEN_BITOFFSET_POS (10U) /* Value equivalent to POSITION_VAL(ADC_CFGR1_EXTEN) */
+
+
+
+/* Internal mask for ADC channel: */
+/* To select into literal LL_ADC_CHANNEL_x the relevant bits for: */
+/* - channel identifier defined by number */
+/* - channel identifier defined by bitfield */
+/* - channel differentiation between external channels (connected to */
+/* GPIO pins) and internal channels (connected to internal paths) */
+#define ADC_CHANNEL_ID_NUMBER_MASK (ADC_CFGR1_AWDCH)
+#define ADC_CHANNEL_ID_BITFIELD_MASK (ADC_CHSELR_CHSEL)
+#define ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS (26U)/* Value equivalent to POSITION_VAL(ADC_CHANNEL_ID_NUMBER_MASK) */
+#define ADC_CHANNEL_ID_MASK (ADC_CHANNEL_ID_NUMBER_MASK | ADC_CHANNEL_ID_BITFIELD_MASK | ADC_CHANNEL_ID_INTERNAL_CH_MASK)
+/* Equivalent mask of ADC_CHANNEL_NUMBER_MASK aligned on register LSB (bit 0) */
+#define ADC_CHANNEL_ID_NUMBER_MASK_POSBIT0 (0x0000001FU) /* Equivalent to shift: (ADC_CHANNEL_NUMBER_MASK >> POSITION_VAL(ADC_CHANNEL_NUMBER_MASK)) */
+
+/* Channel differentiation between external and internal channels */
+#define ADC_CHANNEL_ID_INTERNAL_CH (0x80000000U) /* Marker of internal channel */
+#define ADC_CHANNEL_ID_INTERNAL_CH_MASK (ADC_CHANNEL_ID_INTERNAL_CH)
+
+/* Definition of channels ID number information to be inserted into */
+/* channels literals definition. */
+#define ADC_CHANNEL_0_NUMBER (0x00000000U)
+#define ADC_CHANNEL_1_NUMBER ( ADC_CFGR1_AWDCH_0)
+#define ADC_CHANNEL_2_NUMBER ( ADC_CFGR1_AWDCH_1 )
+#define ADC_CHANNEL_3_NUMBER ( ADC_CFGR1_AWDCH_1 | ADC_CFGR1_AWDCH_0)
+#define ADC_CHANNEL_4_NUMBER ( ADC_CFGR1_AWDCH_2 )
+#define ADC_CHANNEL_5_NUMBER ( ADC_CFGR1_AWDCH_2 | ADC_CFGR1_AWDCH_0)
+#define ADC_CHANNEL_6_NUMBER ( ADC_CFGR1_AWDCH_2 | ADC_CFGR1_AWDCH_1 )
+#define ADC_CHANNEL_7_NUMBER ( ADC_CFGR1_AWDCH_2 | ADC_CFGR1_AWDCH_1 | ADC_CFGR1_AWDCH_0)
+#define ADC_CHANNEL_8_NUMBER ( ADC_CFGR1_AWDCH_3 )
+#define ADC_CHANNEL_9_NUMBER ( ADC_CFGR1_AWDCH_3 | ADC_CFGR1_AWDCH_0)
+#define ADC_CHANNEL_10_NUMBER ( ADC_CFGR1_AWDCH_3 | ADC_CFGR1_AWDCH_1 )
+#define ADC_CHANNEL_11_NUMBER ( ADC_CFGR1_AWDCH_3 | ADC_CFGR1_AWDCH_1 | ADC_CFGR1_AWDCH_0)
+#define ADC_CHANNEL_12_NUMBER ( ADC_CFGR1_AWDCH_3 | ADC_CFGR1_AWDCH_2 )
+#define ADC_CHANNEL_13_NUMBER ( ADC_CFGR1_AWDCH_3 | ADC_CFGR1_AWDCH_2 | ADC_CFGR1_AWDCH_0)
+#define ADC_CHANNEL_14_NUMBER ( ADC_CFGR1_AWDCH_3 | ADC_CFGR1_AWDCH_2 | ADC_CFGR1_AWDCH_1 )
+#define ADC_CHANNEL_15_NUMBER ( ADC_CFGR1_AWDCH_3 | ADC_CFGR1_AWDCH_2 | ADC_CFGR1_AWDCH_1 | ADC_CFGR1_AWDCH_0)
+#define ADC_CHANNEL_16_NUMBER (ADC_CFGR1_AWDCH_4 )
+#define ADC_CHANNEL_17_NUMBER (ADC_CFGR1_AWDCH_4 | ADC_CFGR1_AWDCH_0)
+#define ADC_CHANNEL_18_NUMBER (ADC_CFGR1_AWDCH_4 | ADC_CFGR1_AWDCH_1 )
+
+/* Definition of channels ID bitfield information to be inserted into */
+/* channels literals definition. */
+#define ADC_CHANNEL_0_BITFIELD (ADC_CHSELR_CHSEL0)
+#define ADC_CHANNEL_1_BITFIELD (ADC_CHSELR_CHSEL1)
+#define ADC_CHANNEL_2_BITFIELD (ADC_CHSELR_CHSEL2)
+#define ADC_CHANNEL_3_BITFIELD (ADC_CHSELR_CHSEL3)
+#define ADC_CHANNEL_4_BITFIELD (ADC_CHSELR_CHSEL4)
+#define ADC_CHANNEL_5_BITFIELD (ADC_CHSELR_CHSEL5)
+#define ADC_CHANNEL_6_BITFIELD (ADC_CHSELR_CHSEL6)
+#define ADC_CHANNEL_7_BITFIELD (ADC_CHSELR_CHSEL7)
+#define ADC_CHANNEL_8_BITFIELD (ADC_CHSELR_CHSEL8)
+#define ADC_CHANNEL_9_BITFIELD (ADC_CHSELR_CHSEL9)
+#define ADC_CHANNEL_10_BITFIELD (ADC_CHSELR_CHSEL10)
+#define ADC_CHANNEL_11_BITFIELD (ADC_CHSELR_CHSEL11)
+#define ADC_CHANNEL_12_BITFIELD (ADC_CHSELR_CHSEL12)
+#define ADC_CHANNEL_13_BITFIELD (ADC_CHSELR_CHSEL13)
+#define ADC_CHANNEL_14_BITFIELD (ADC_CHSELR_CHSEL14)
+#define ADC_CHANNEL_15_BITFIELD (ADC_CHSELR_CHSEL15)
+#define ADC_CHANNEL_16_BITFIELD (ADC_CHSELR_CHSEL16)
+#define ADC_CHANNEL_17_BITFIELD (ADC_CHSELR_CHSEL17)
+#define ADC_CHANNEL_18_BITFIELD (ADC_CHSELR_CHSEL18)
+
+/* Internal mask for ADC analog watchdog: */
+/* To select into literals LL_ADC_AWD_CHANNELx_xxx the relevant bits for: */
+/* (concatenation of multiple bits used in different analog watchdogs, */
+/* (feature of several watchdogs not available on all STM32 families)). */
+/* - analog watchdog 1: monitored channel defined by number, */
+/* selection of ADC group (ADC group regular). */
+
+/* Internal register offset for ADC analog watchdog channel configuration */
+#define ADC_AWD_CR1_REGOFFSET (0x00000000U)
+
+#define ADC_AWD_CRX_REGOFFSET_MASK (ADC_AWD_CR1_REGOFFSET)
+
+#define ADC_AWD_CR1_CHANNEL_MASK (ADC_CFGR1_AWDCH | ADC_CFGR1_AWDEN | ADC_CFGR1_AWDSGL)
+#define ADC_AWD_CR_ALL_CHANNEL_MASK (ADC_AWD_CR1_CHANNEL_MASK)
+
+/* Internal register offset for ADC analog watchdog threshold configuration */
+#define ADC_AWD_TR1_REGOFFSET (ADC_AWD_CR1_REGOFFSET)
+#define ADC_AWD_TRX_REGOFFSET_MASK (ADC_AWD_TR1_REGOFFSET)
+
+
+/* ADC registers bits positions */
+#define ADC_CFGR1_RES_BITOFFSET_POS ( 3U) /* Value equivalent to POSITION_VAL(ADC_CFGR1_RES) */
+#define ADC_CFGR1_AWDSGL_BITOFFSET_POS (22U) /* Value equivalent to POSITION_VAL(ADC_CFGR1_AWDSGL) */
+#define ADC_TR_HT_BITOFFSET_POS (16U) /* Value equivalent to POSITION_VAL(ADC_TR_HT) */
+#define ADC_CHSELR_CHSEL0_BITOFFSET_POS ( 0U) /* Value equivalent to POSITION_VAL(ADC_CHSELR_CHSEL0) */
+#define ADC_CHSELR_CHSEL1_BITOFFSET_POS ( 1U) /* Value equivalent to POSITION_VAL(ADC_CHSELR_CHSEL1) */
+#define ADC_CHSELR_CHSEL2_BITOFFSET_POS ( 2U) /* Value equivalent to POSITION_VAL(ADC_CHSELR_CHSEL2) */
+#define ADC_CHSELR_CHSEL3_BITOFFSET_POS ( 3U) /* Value equivalent to POSITION_VAL(ADC_CHSELR_CHSEL3) */
+#define ADC_CHSELR_CHSEL4_BITOFFSET_POS ( 4U) /* Value equivalent to POSITION_VAL(ADC_CHSELR_CHSEL4) */
+#define ADC_CHSELR_CHSEL5_BITOFFSET_POS ( 5U) /* Value equivalent to POSITION_VAL(ADC_CHSELR_CHSEL5) */
+#define ADC_CHSELR_CHSEL6_BITOFFSET_POS ( 6U) /* Value equivalent to POSITION_VAL(ADC_CHSELR_CHSEL6) */
+#define ADC_CHSELR_CHSEL7_BITOFFSET_POS ( 7U) /* Value equivalent to POSITION_VAL(ADC_CHSELR_CHSEL7) */
+#define ADC_CHSELR_CHSEL8_BITOFFSET_POS ( 8U) /* Value equivalent to POSITION_VAL(ADC_CHSELR_CHSEL8) */
+#define ADC_CHSELR_CHSEL9_BITOFFSET_POS ( 9U) /* Value equivalent to POSITION_VAL(ADC_CHSELR_CHSEL9) */
+#define ADC_CHSELR_CHSEL10_BITOFFSET_POS (10U) /* Value equivalent to POSITION_VAL(ADC_CHSELR_CHSEL10) */
+#define ADC_CHSELR_CHSEL11_BITOFFSET_POS (11U) /* Value equivalent to POSITION_VAL(ADC_CHSELR_CHSEL11) */
+#define ADC_CHSELR_CHSEL12_BITOFFSET_POS (12U) /* Value equivalent to POSITION_VAL(ADC_CHSELR_CHSEL12) */
+#define ADC_CHSELR_CHSEL13_BITOFFSET_POS (13U) /* Value equivalent to POSITION_VAL(ADC_CHSELR_CHSEL13) */
+#define ADC_CHSELR_CHSEL14_BITOFFSET_POS (14U) /* Value equivalent to POSITION_VAL(ADC_CHSELR_CHSEL14) */
+#define ADC_CHSELR_CHSEL15_BITOFFSET_POS (15U) /* Value equivalent to POSITION_VAL(ADC_CHSELR_CHSEL15) */
+#define ADC_CHSELR_CHSEL16_BITOFFSET_POS (16U) /* Value equivalent to POSITION_VAL(ADC_CHSELR_CHSEL16) */
+#define ADC_CHSELR_CHSEL17_BITOFFSET_POS (17U) /* Value equivalent to POSITION_VAL(ADC_CHSELR_CHSEL17) */
+#define ADC_CHSELR_CHSEL18_BITOFFSET_POS (18U) /* Value equivalent to POSITION_VAL(ADC_CHSELR_CHSEL18) */
+
+
+/* ADC registers bits groups */
+#define ADC_CR_BITS_PROPERTY_RS (ADC_CR_ADCAL | ADC_CR_ADSTP | ADC_CR_ADSTART | ADC_CR_ADDIS | ADC_CR_ADEN) /* ADC register CR bits with HW property "rs": Software can read as well as set this bit. Writing '0' has no effect on the bit value. */
+
+
+/* ADC internal channels related definitions */
+/* Internal voltage reference VrefInt */
+#define VREFINT_CAL_ADDR ((uint16_t*) (0x1FFFF7BAU)) /* Internal voltage reference, address of parameter VREFINT_CAL: VrefInt ADC raw data acquired at temperature 30 DegC (tolerance: +-5 DegC), Vref+ = 3.3 V (tolerance: +-10 mV). */
+#define VREFINT_CAL_VREF ( 3300U) /* Analog voltage reference (Vref+) value with which temperature sensor has been calibrated in production (tolerance: +-10 mV) (unit: mV). */
+/* Temperature sensor */
+#define TEMPSENSOR_CAL1_ADDR ((uint16_t*) (0x1FFFF7B8U)) /* Internal temperature sensor, address of parameter TS_CAL1: On STM32F0, temperature sensor ADC raw data acquired at temperature 30 DegC (tolerance: +-5 DegC), Vref+ = 3.3 V (tolerance: +-10 mV). */
+#define TEMPSENSOR_CAL2_ADDR ((uint16_t*) (0x1FFFF7C2U)) /* Internal temperature sensor, address of parameter TS_CAL2: On STM32F0, temperature sensor ADC raw data acquired at temperature 110 DegC (tolerance: +-5 DegC), Vref+ = 3.3 V (tolerance: +-10 mV). */
+#define TEMPSENSOR_CAL1_TEMP (( int32_t) 30) /* Internal temperature sensor, temperature at which temperature sensor has been calibrated in production for data into TEMPSENSOR_CAL1_ADDR (tolerance: +-5 DegC) (unit: DegC). */
+#define TEMPSENSOR_CAL2_TEMP (( int32_t) 110) /* Internal temperature sensor, temperature at which temperature sensor has been calibrated in production for data into TEMPSENSOR_CAL2_ADDR (tolerance: +-5 DegC) (unit: DegC). */
+#define TEMPSENSOR_CAL_VREFANALOG ( 3300U) /* Analog voltage reference (Vref+) voltage with which temperature sensor has been calibrated in production (+-10 mV) (unit: mV). */
+
+
+/**
+ * @}
+ */
+
+
+/* Exported types ------------------------------------------------------------*/
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup ADC_LL_ES_INIT ADC Exported Init structure
+ * @{
+ */
+
+/**
+ * @brief Structure definition of some features of ADC instance.
+ * @note These parameters have an impact on ADC scope: ADC instance.
+ * Refer to corresponding unitary functions into
+ * @ref ADC_LL_EF_Configuration_ADC_Instance .
+ * @note The setting of these parameters by function @ref LL_ADC_Init()
+ * is conditioned to ADC state:
+ * ADC instance must be disabled.
+ * This condition is applied to all ADC features, for efficiency
+ * and compatibility over all STM32 families. However, the different
+ * features can be set under different ADC state conditions
+ * (setting possible with ADC enabled without conversion on going,
+ * ADC enabled with conversion on going, ...)
+ * Each feature can be updated afterwards with a unitary function
+ * and potentially with ADC in a different state than disabled,
+ * refer to description of each function for setting
+ * conditioned to ADC state.
+ */
+typedef struct
+{
+ uint32_t Clock; /*!< Set ADC instance clock source and prescaler.
+ This parameter can be a value of @ref ADC_LL_EC_CLOCK_SOURCE
+ @note On this STM32 serie, this parameter has some clock ratio constraints:
+ ADC clock synchronous (from PCLK) with prescaler 1 must be enabled only if PCLK has a 50% duty clock cycle
+ (APB prescaler configured inside the RCC must be bypassed and the system clock must by 50% duty cycle).
+
+
+ This feature can be modified afterwards using unitary function @ref LL_ADC_SetClock().
+ For more details, refer to description of this function. */
+
+ uint32_t Resolution; /*!< Set ADC resolution.
+ This parameter can be a value of @ref ADC_LL_EC_RESOLUTION
+
+ This feature can be modified afterwards using unitary function @ref LL_ADC_SetResolution(). */
+
+ uint32_t DataAlignment; /*!< Set ADC conversion data alignment.
+ This parameter can be a value of @ref ADC_LL_EC_DATA_ALIGN
+
+ This feature can be modified afterwards using unitary function @ref LL_ADC_SetDataAlignment(). */
+
+ uint32_t LowPowerMode; /*!< Set ADC low power mode.
+ This parameter can be a value of @ref ADC_LL_EC_LP_MODE
+
+ This feature can be modified afterwards using unitary function @ref LL_ADC_SetLowPowerMode(). */
+
+} LL_ADC_InitTypeDef;
+
+/**
+ * @brief Structure definition of some features of ADC group regular.
+ * @note These parameters have an impact on ADC scope: ADC group regular.
+ * Refer to corresponding unitary functions into
+ * @ref ADC_LL_EF_Configuration_ADC_Group_Regular
+ * (functions with prefix "REG").
+ * @note The setting of these parameters by function @ref LL_ADC_REG_Init()
+ * is conditioned to ADC state:
+ * ADC instance must be disabled.
+ * This condition is applied to all ADC features, for efficiency
+ * and compatibility over all STM32 families. However, the different
+ * features can be set under different ADC state conditions
+ * (setting possible with ADC enabled without conversion on going,
+ * ADC enabled with conversion on going, ...)
+ * Each feature can be updated afterwards with a unitary function
+ * and potentially with ADC in a different state than disabled,
+ * refer to description of each function for setting
+ * conditioned to ADC state.
+ */
+typedef struct
+{
+ uint32_t TriggerSource; /*!< Set ADC group regular conversion trigger source: internal (SW start) or from external IP (timer event, external interrupt line).
+ This parameter can be a value of @ref ADC_LL_EC_REG_TRIGGER_SOURCE
+ @note On this STM32 serie, setting trigger source to external trigger also set trigger polarity to rising edge
+ (default setting for compatibility with some ADC on other STM32 families having this setting set by HW default value).
+ In case of need to modify trigger edge, use function @ref LL_ADC_REG_SetTriggerEdge().
+
+ This feature can be modified afterwards using unitary function @ref LL_ADC_REG_SetTriggerSource(). */
+
+ uint32_t SequencerDiscont; /*!< Set ADC group regular sequencer discontinuous mode: sequence subdivided and scan conversions interrupted every selected number of ranks.
+ This parameter can be a value of @ref ADC_LL_EC_REG_SEQ_DISCONT_MODE
+ @note This parameter has an effect only if group regular sequencer is enabled
+ (several ADC channels enabled in group regular sequencer).
+
+ This feature can be modified afterwards using unitary function @ref LL_ADC_REG_SetSequencerDiscont(). */
+
+ uint32_t ContinuousMode; /*!< Set ADC continuous conversion mode on ADC group regular, whether ADC conversions are performed in single mode (one conversion per trigger) or in continuous mode (after the first trigger, following conversions launched successively automatically).
+ This parameter can be a value of @ref ADC_LL_EC_REG_CONTINUOUS_MODE
+ Note: It is not possible to enable both ADC group regular continuous mode and discontinuous mode.
+
+ This feature can be modified afterwards using unitary function @ref LL_ADC_REG_SetContinuousMode(). */
+
+ uint32_t DMATransfer; /*!< Set ADC group regular conversion data transfer: no transfer or transfer by DMA, and DMA requests mode.
+ This parameter can be a value of @ref ADC_LL_EC_REG_DMA_TRANSFER
+
+ This feature can be modified afterwards using unitary function @ref LL_ADC_REG_SetDMATransfer(). */
+
+ uint32_t Overrun; /*!< Set ADC group regular behavior in case of overrun:
+ data preserved or overwritten.
+ This parameter can be a value of @ref ADC_LL_EC_REG_OVR_DATA_BEHAVIOR
+
+ This feature can be modified afterwards using unitary function @ref LL_ADC_REG_SetOverrun(). */
+
+} LL_ADC_REG_InitTypeDef;
+
+/**
+ * @}
+ */
+#endif /* USE_FULL_LL_DRIVER */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup ADC_LL_Exported_Constants ADC Exported Constants
+ * @{
+ */
+
+/** @defgroup ADC_LL_EC_FLAG ADC flags
+ * @brief Flags defines which can be used with LL_ADC_ReadReg function
+ * @{
+ */
+#define LL_ADC_FLAG_ADRDY ADC_ISR_ADRDY /*!< ADC flag ADC instance ready */
+#define LL_ADC_FLAG_EOC ADC_ISR_EOC /*!< ADC flag ADC group regular end of unitary conversion */
+#define LL_ADC_FLAG_EOS ADC_ISR_EOS /*!< ADC flag ADC group regular end of sequence conversions */
+#define LL_ADC_FLAG_OVR ADC_ISR_OVR /*!< ADC flag ADC group regular overrun */
+#define LL_ADC_FLAG_EOSMP ADC_ISR_EOSMP /*!< ADC flag ADC group regular end of sampling phase */
+#define LL_ADC_FLAG_AWD1 ADC_ISR_AWD /*!< ADC flag ADC analog watchdog 1 */
+/**
+ * @}
+ */
+
+/** @defgroup ADC_LL_EC_IT ADC interruptions for configuration (interruption enable or disable)
+ * @brief IT defines which can be used with LL_ADC_ReadReg and LL_ADC_WriteReg functions
+ * @{
+ */
+#define LL_ADC_IT_ADRDY ADC_IER_ADRDYIE /*!< ADC interruption ADC instance ready */
+#define LL_ADC_IT_EOC ADC_IER_EOCIE /*!< ADC interruption ADC group regular end of unitary conversion */
+#define LL_ADC_IT_EOS ADC_IER_EOSIE /*!< ADC interruption ADC group regular end of sequence conversions */
+#define LL_ADC_IT_OVR ADC_IER_OVRIE /*!< ADC interruption ADC group regular overrun */
+#define LL_ADC_IT_EOSMP ADC_IER_EOSMPIE /*!< ADC interruption ADC group regular end of sampling phase */
+#define LL_ADC_IT_AWD1 ADC_IER_AWDIE /*!< ADC interruption ADC analog watchdog 1 */
+/**
+ * @}
+ */
+
+/** @defgroup ADC_LL_EC_REGISTERS ADC registers compliant with specific purpose
+ * @{
+ */
+/* List of ADC registers intended to be used (most commonly) with */
+/* DMA transfer. */
+/* Refer to function @ref LL_ADC_DMA_GetRegAddr(). */
+#define LL_ADC_DMA_REG_REGULAR_DATA (0x00000000U) /* ADC group regular conversion data register (corresponding to register DR) to be used with ADC configured in independent mode. Without DMA transfer, register accessed by LL function @ref LL_ADC_REG_ReadConversionData32() and other functions @ref LL_ADC_REG_ReadConversionDatax() */
+/**
+ * @}
+ */
+
+/** @defgroup ADC_LL_EC_COMMON_PATH_INTERNAL ADC common - Measurement path to internal channels
+ * @{
+ */
+/* Note: Other measurement paths to internal channels may be available */
+/* (connections to other peripherals). */
+/* If they are not listed below, they do not require any specific */
+/* path enable. In this case, Access to measurement path is done */
+/* only by selecting the corresponding ADC internal channel. */
+#define LL_ADC_PATH_INTERNAL_NONE (0x00000000U)/*!< ADC measurement pathes all disabled */
+#define LL_ADC_PATH_INTERNAL_VREFINT (ADC_CCR_VREFEN) /*!< ADC measurement path to internal channel VrefInt */
+#define LL_ADC_PATH_INTERNAL_TEMPSENSOR (ADC_CCR_TSEN) /*!< ADC measurement path to internal channel temperature sensor */
+#if defined(ADC_CCR_VBATEN)
+#define LL_ADC_PATH_INTERNAL_VBAT (ADC_CCR_VBATEN) /*!< ADC measurement path to internal channel Vbat */
+#endif
+/**
+ * @}
+ */
+
+/** @defgroup ADC_LL_EC_CLOCK_SOURCE ADC instance - Clock source
+ * @{
+ */
+#define LL_ADC_CLOCK_SYNC_PCLK_DIV4 (ADC_CFGR2_CKMODE_1) /*!< ADC synchronous clock derived from AHB clock divided by 4 */
+#define LL_ADC_CLOCK_SYNC_PCLK_DIV2 (ADC_CFGR2_CKMODE_0) /*!< ADC synchronous clock derived from AHB clock divided by 2 */
+#define LL_ADC_CLOCK_ASYNC (0x00000000U) /*!< ADC asynchronous clock. On this STM32 serie, asynchronous clock has no prescaler. */
+/**
+ * @}
+ */
+
+/** @defgroup ADC_LL_EC_RESOLUTION ADC instance - Resolution
+ * @{
+ */
+#define LL_ADC_RESOLUTION_12B (0x00000000U) /*!< ADC resolution 12 bits */
+#define LL_ADC_RESOLUTION_10B ( ADC_CFGR1_RES_0) /*!< ADC resolution 10 bits */
+#define LL_ADC_RESOLUTION_8B (ADC_CFGR1_RES_1 ) /*!< ADC resolution 8 bits */
+#define LL_ADC_RESOLUTION_6B (ADC_CFGR1_RES_1 | ADC_CFGR1_RES_0) /*!< ADC resolution 6 bits */
+/**
+ * @}
+ */
+
+/** @defgroup ADC_LL_EC_DATA_ALIGN ADC instance - Data alignment
+ * @{
+ */
+#define LL_ADC_DATA_ALIGN_RIGHT (0x00000000U)/*!< ADC conversion data alignment: right aligned (alignment on data register LSB bit 0)*/
+#define LL_ADC_DATA_ALIGN_LEFT (ADC_CFGR1_ALIGN) /*!< ADC conversion data alignment: left aligned (aligment on data register MSB bit 15)*/
+/**
+ * @}
+ */
+
+/** @defgroup ADC_LL_EC_LP_MODE ADC instance - Low power mode
+ * @{
+ */
+#define LL_ADC_LP_MODE_NONE (0x00000000U) /*!< No ADC low power mode activated */
+#define LL_ADC_LP_AUTOWAIT (ADC_CFGR1_WAIT) /*!< ADC low power mode auto delay: Dynamic low power mode, ADC conversions are performed only when necessary (when previous ADC conversion data is read). See description with function @ref LL_ADC_SetLowPowerMode(). */
+#define LL_ADC_LP_AUTOPOWEROFF (ADC_CFGR1_AUTOFF) /*!< ADC low power mode auto power-off: the ADC automatically powers-off after a ADC conversion and automatically wakes up when a new ADC conversion is triggered (with startup time between trigger and start of sampling). See description with function @ref LL_ADC_SetLowPowerMode(). Note: On STM32F0, if enabled, this feature also turns off the ADC dedicated 14 MHz RC oscillator (HSI14) during auto wait phase. */
+#define LL_ADC_LP_AUTOWAIT_AUTOPOWEROFF (ADC_CFGR1_WAIT | ADC_CFGR1_AUTOFF) /*!< ADC low power modes auto wait and auto power-off combined. See description with function @ref LL_ADC_SetLowPowerMode(). */
+/**
+ * @}
+ */
+
+/** @defgroup ADC_LL_EC_GROUPS ADC instance - Groups
+ * @{
+ */
+#define LL_ADC_GROUP_REGULAR (0x00000001U) /*!< ADC group regular (available on all STM32 devices) */
+/**
+ * @}
+ */
+
+/** @defgroup ADC_LL_EC_CHANNEL ADC instance - Channel number
+ * @{
+ */
+#define LL_ADC_CHANNEL_0 (ADC_CHANNEL_0_NUMBER | ADC_CHANNEL_0_BITFIELD ) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN0 */
+#define LL_ADC_CHANNEL_1 (ADC_CHANNEL_1_NUMBER | ADC_CHANNEL_1_BITFIELD ) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN1 */
+#define LL_ADC_CHANNEL_2 (ADC_CHANNEL_2_NUMBER | ADC_CHANNEL_2_BITFIELD ) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN2 */
+#define LL_ADC_CHANNEL_3 (ADC_CHANNEL_3_NUMBER | ADC_CHANNEL_3_BITFIELD ) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN3 */
+#define LL_ADC_CHANNEL_4 (ADC_CHANNEL_4_NUMBER | ADC_CHANNEL_4_BITFIELD ) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN4 */
+#define LL_ADC_CHANNEL_5 (ADC_CHANNEL_5_NUMBER | ADC_CHANNEL_5_BITFIELD ) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN5 */
+#define LL_ADC_CHANNEL_6 (ADC_CHANNEL_6_NUMBER | ADC_CHANNEL_6_BITFIELD ) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN6 */
+#define LL_ADC_CHANNEL_7 (ADC_CHANNEL_7_NUMBER | ADC_CHANNEL_7_BITFIELD ) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN7 */
+#define LL_ADC_CHANNEL_8 (ADC_CHANNEL_8_NUMBER | ADC_CHANNEL_8_BITFIELD ) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN8 */
+#define LL_ADC_CHANNEL_9 (ADC_CHANNEL_9_NUMBER | ADC_CHANNEL_9_BITFIELD ) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN9 */
+#define LL_ADC_CHANNEL_10 (ADC_CHANNEL_10_NUMBER | ADC_CHANNEL_10_BITFIELD) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN10 */
+#define LL_ADC_CHANNEL_11 (ADC_CHANNEL_11_NUMBER | ADC_CHANNEL_11_BITFIELD) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN11 */
+#define LL_ADC_CHANNEL_12 (ADC_CHANNEL_12_NUMBER | ADC_CHANNEL_12_BITFIELD) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN12 */
+#define LL_ADC_CHANNEL_13 (ADC_CHANNEL_13_NUMBER | ADC_CHANNEL_13_BITFIELD) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN13 */
+#define LL_ADC_CHANNEL_14 (ADC_CHANNEL_14_NUMBER | ADC_CHANNEL_14_BITFIELD) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN14 */
+#define LL_ADC_CHANNEL_15 (ADC_CHANNEL_15_NUMBER | ADC_CHANNEL_15_BITFIELD) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN15 */
+#define LL_ADC_CHANNEL_16 (ADC_CHANNEL_16_NUMBER | ADC_CHANNEL_16_BITFIELD) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN16 */
+#define LL_ADC_CHANNEL_17 (ADC_CHANNEL_17_NUMBER | ADC_CHANNEL_17_BITFIELD) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN17 */
+#define LL_ADC_CHANNEL_VREFINT (LL_ADC_CHANNEL_17 | ADC_CHANNEL_ID_INTERNAL_CH) /*!< ADC internal channel connected to VrefInt: Internal voltage reference. */
+#define LL_ADC_CHANNEL_TEMPSENSOR (LL_ADC_CHANNEL_16 | ADC_CHANNEL_ID_INTERNAL_CH) /*!< ADC internal channel connected to Temperature sensor. */
+#if defined(ADC_CCR_VBATEN)
+#define LL_ADC_CHANNEL_18 (ADC_CHANNEL_18_NUMBER | ADC_CHANNEL_18_BITFIELD) /*!< ADC external channel (channel connected to GPIO pin) ADCx_IN18 */
+#define LL_ADC_CHANNEL_VBAT (LL_ADC_CHANNEL_18 | ADC_CHANNEL_ID_INTERNAL_CH) /*!< ADC internal channel connected to Vbat/2: Vbat voltage through a divider ladder of factor 1/2 to have Vbat always below Vdda. */
+#endif
+/**
+ * @}
+ */
+
+/** @defgroup ADC_LL_EC_REG_TRIGGER_SOURCE ADC group regular - Trigger source
+ * @{
+ */
+#define LL_ADC_REG_TRIG_SOFTWARE (0x00000000U) /*!< ADC group regular conversion trigger internal: SW start. */
+#define LL_ADC_REG_TRIG_EXT_TIM1_TRGO (ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular conversion trigger from external IP: TIM1 TRGO. Trigger edge set to rising edge (default setting). */
+#define LL_ADC_REG_TRIG_EXT_TIM1_CH4 (ADC_CFGR1_EXTSEL_0 | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular conversion trigger from external IP: TIM1 channel 4 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */
+#define LL_ADC_REG_TRIG_EXT_TIM2_TRGO (ADC_CFGR1_EXTSEL_1 | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular conversion trigger from external IP: TIM2 TRGO. Trigger edge set to rising edge (default setting). */
+#define LL_ADC_REG_TRIG_EXT_TIM3_TRGO (ADC_CFGR1_EXTSEL_1 | ADC_CFGR1_EXTSEL_0 | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular conversion trigger from external IP: TIM3 TRGO. Trigger edge set to rising edge (default setting). */
+#define LL_ADC_REG_TRIG_EXT_TIM15_TRGO (ADC_CFGR1_EXTSEL_2 | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular conversion trigger from external IP: TIM15 TRGO. Trigger edge set to rising edge (default setting). */
+/**
+ * @}
+ */
+
+/** @defgroup ADC_LL_EC_REG_TRIGGER_EDGE ADC group regular - Trigger edge
+ * @{
+ */
+#define LL_ADC_REG_TRIG_EXT_RISING ( ADC_CFGR1_EXTEN_0) /*!< ADC group regular conversion trigger polarity set to rising edge */
+#define LL_ADC_REG_TRIG_EXT_FALLING (ADC_CFGR1_EXTEN_1 ) /*!< ADC group regular conversion trigger polarity set to falling edge */
+#define LL_ADC_REG_TRIG_EXT_RISINGFALLING (ADC_CFGR1_EXTEN_1 | ADC_CFGR1_EXTEN_0) /*!< ADC group regular conversion trigger polarity set to both rising and falling edges */
+/**
+ * @}
+ */
+
+/** @defgroup ADC_LL_EC_REG_CONTINUOUS_MODE ADC group regular - Continuous mode
+* @{
+*/
+#define LL_ADC_REG_CONV_SINGLE (0x00000000U) /*!< ADC conversions are performed in single mode: one conversion per trigger */
+#define LL_ADC_REG_CONV_CONTINUOUS (ADC_CFGR1_CONT) /*!< ADC conversions are performed in continuous mode: after the first trigger, following conversions launched successively automatically */
+/**
+ * @}
+ */
+
+/** @defgroup ADC_LL_EC_REG_DMA_TRANSFER ADC group regular - DMA transfer of ADC conversion data
+ * @{
+ */
+#define LL_ADC_REG_DMA_TRANSFER_NONE (0x00000000U) /*!< ADC conversions are not transferred by DMA */
+#define LL_ADC_REG_DMA_TRANSFER_LIMITED ( ADC_CFGR1_DMAEN) /*!< ADC conversion data are transferred by DMA, in limited mode (one shot mode): DMA transfer requests are stopped when number of DMA data transfers (number of ADC conversions) is reached. This ADC mode is intended to be used with DMA mode non-circular. */
+#define LL_ADC_REG_DMA_TRANSFER_UNLIMITED (ADC_CFGR1_DMACFG | ADC_CFGR1_DMAEN) /*!< ADC conversion data are transferred by DMA, in unlimited mode: DMA transfer requests are unlimited, whatever number of DMA data transferred (number of ADC conversions). This ADC mode is intended to be used with DMA mode circular. */
+/**
+ * @}
+ */
+
+/** @defgroup ADC_LL_EC_REG_OVR_DATA_BEHAVIOR ADC group regular - Overrun behavior on conversion data
+* @{
+*/
+#define LL_ADC_REG_OVR_DATA_PRESERVED (0x00000000U)/*!< ADC group regular behavior in case of overrun: data preserved */
+#define LL_ADC_REG_OVR_DATA_OVERWRITTEN (ADC_CFGR1_OVRMOD) /*!< ADC group regular behavior in case of overrun: data overwritten */
+/**
+ * @}
+ */
+
+/** @defgroup ADC_LL_EC_REG_SEQ_SCAN_DIRECTION ADC group regular - Sequencer scan direction
+ * @{
+ */
+#define LL_ADC_REG_SEQ_SCAN_DIR_FORWARD (0x00000000U)/*!< ADC group regular sequencer scan direction forward: from lowest channel number to highest channel number (scan of all ranks, ADC conversion of ranks with channels enabled in sequencer). On some other STM32 families, this setting is not available and the default scan direction is forward. */
+#define LL_ADC_REG_SEQ_SCAN_DIR_BACKWARD (ADC_CFGR1_SCANDIR) /*!< ADC group regular sequencer scan direction backward: from highest channel number to lowest channel number (scan of all ranks, ADC conversion of ranks with channels enabled in sequencer) */
+/**
+ * @}
+ */
+
+/** @defgroup ADC_LL_EC_REG_SEQ_DISCONT_MODE ADC group regular - Sequencer discontinuous mode
+ * @{
+ */
+#define LL_ADC_REG_SEQ_DISCONT_DISABLE (0x00000000U) /*!< ADC group regular sequencer discontinuous mode disable */
+#define LL_ADC_REG_SEQ_DISCONT_1RANK (ADC_CFGR1_DISCEN) /*!< ADC group regular sequencer discontinuous mode enable with sequence interruption every rank */
+/**
+ * @}
+ */
+
+/** @defgroup ADC_LL_EC_CHANNEL_SAMPLINGTIME Channel - Sampling time
+ * @{
+ */
+#define LL_ADC_SAMPLINGTIME_1CYCLE_5 (0x00000000U) /*!< Sampling time 1.5 ADC clock cycle */
+#define LL_ADC_SAMPLINGTIME_7CYCLES_5 (ADC_SMPR_SMP_0) /*!< Sampling time 7.5 ADC clock cycles */
+#define LL_ADC_SAMPLINGTIME_13CYCLES_5 (ADC_SMPR_SMP_1) /*!< Sampling time 13.5 ADC clock cycles */
+#define LL_ADC_SAMPLINGTIME_28CYCLES_5 (ADC_SMPR_SMP_1 | ADC_SMPR_SMP_0) /*!< Sampling time 28.5 ADC clock cycles */
+#define LL_ADC_SAMPLINGTIME_41CYCLES_5 (ADC_SMPR_SMP_2) /*!< Sampling time 41.5 ADC clock cycles */
+#define LL_ADC_SAMPLINGTIME_55CYCLES_5 (ADC_SMPR_SMP_2 | ADC_SMPR_SMP_0) /*!< Sampling time 55.5 ADC clock cycles */
+#define LL_ADC_SAMPLINGTIME_71CYCLES_5 (ADC_SMPR_SMP_2 | ADC_SMPR_SMP_1) /*!< Sampling time 71.5 ADC clock cycles */
+#define LL_ADC_SAMPLINGTIME_239CYCLES_5 (ADC_SMPR_SMP_2 | ADC_SMPR_SMP_1 | ADC_SMPR_SMP_0) /*!< Sampling time 239.5 ADC clock cycles */
+/**
+ * @}
+ */
+
+/** @defgroup ADC_LL_EC_AWD_NUMBER Analog watchdog - Analog watchdog number
+ * @{
+ */
+#define LL_ADC_AWD1 (ADC_AWD_CR1_CHANNEL_MASK | ADC_AWD_CR1_REGOFFSET) /*!< ADC analog watchdog number 1 */
+/**
+ * @}
+ */
+
+/** @defgroup ADC_LL_EC_AWD_CHANNELS Analog watchdog - Monitored channels
+ * @{
+ */
+#define LL_ADC_AWD_DISABLE (0x00000000U) /*!< ADC analog watchdog monitoring disabled */
+#define LL_ADC_AWD_ALL_CHANNELS_REG ( ADC_CFGR1_AWDEN ) /*!< ADC analog watchdog monitoring of all channels, converted by group regular only */
+#define LL_ADC_AWD_CHANNEL_0_REG ((LL_ADC_CHANNEL_0 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWDEN | ADC_CFGR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN0, converted by group regular only */
+#define LL_ADC_AWD_CHANNEL_1_REG ((LL_ADC_CHANNEL_1 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWDEN | ADC_CFGR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN1, converted by group regular only */
+#define LL_ADC_AWD_CHANNEL_2_REG ((LL_ADC_CHANNEL_2 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWDEN | ADC_CFGR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN2, converted by group regular only */
+#define LL_ADC_AWD_CHANNEL_3_REG ((LL_ADC_CHANNEL_3 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWDEN | ADC_CFGR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN3, converted by group regular only */
+#define LL_ADC_AWD_CHANNEL_4_REG ((LL_ADC_CHANNEL_4 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWDEN | ADC_CFGR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN4, converted by group regular only */
+#define LL_ADC_AWD_CHANNEL_5_REG ((LL_ADC_CHANNEL_5 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWDEN | ADC_CFGR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN5, converted by group regular only */
+#define LL_ADC_AWD_CHANNEL_6_REG ((LL_ADC_CHANNEL_6 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWDEN | ADC_CFGR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN6, converted by group regular only */
+#define LL_ADC_AWD_CHANNEL_7_REG ((LL_ADC_CHANNEL_7 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWDEN | ADC_CFGR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN7, converted by group regular only */
+#define LL_ADC_AWD_CHANNEL_8_REG ((LL_ADC_CHANNEL_8 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWDEN | ADC_CFGR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN8, converted by group regular only */
+#define LL_ADC_AWD_CHANNEL_9_REG ((LL_ADC_CHANNEL_9 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWDEN | ADC_CFGR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN9, converted by group regular only */
+#define LL_ADC_AWD_CHANNEL_10_REG ((LL_ADC_CHANNEL_10 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWDEN | ADC_CFGR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN10, converted by group regular only */
+#define LL_ADC_AWD_CHANNEL_11_REG ((LL_ADC_CHANNEL_11 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWDEN | ADC_CFGR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN11, converted by group regular only */
+#define LL_ADC_AWD_CHANNEL_12_REG ((LL_ADC_CHANNEL_12 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWDEN | ADC_CFGR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN12, converted by group regular only */
+#define LL_ADC_AWD_CHANNEL_13_REG ((LL_ADC_CHANNEL_13 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWDEN | ADC_CFGR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN13, converted by group regular only */
+#define LL_ADC_AWD_CHANNEL_14_REG ((LL_ADC_CHANNEL_14 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWDEN | ADC_CFGR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN14, converted by group regular only */
+#define LL_ADC_AWD_CHANNEL_15_REG ((LL_ADC_CHANNEL_15 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWDEN | ADC_CFGR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN15, converted by group regular only */
+#define LL_ADC_AWD_CHANNEL_16_REG ((LL_ADC_CHANNEL_16 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWDEN | ADC_CFGR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN16, converted by group regular only */
+#define LL_ADC_AWD_CHANNEL_17_REG ((LL_ADC_CHANNEL_17 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWDEN | ADC_CFGR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN17, converted by group regular only */
+#define LL_ADC_AWD_CH_VREFINT_REG ((LL_ADC_CHANNEL_VREFINT & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWDEN | ADC_CFGR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to VrefInt: Internal voltage reference, converted by group regular only */
+#define LL_ADC_AWD_CH_TEMPSENSOR_REG ((LL_ADC_CHANNEL_TEMPSENSOR & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWDEN | ADC_CFGR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to Temperature sensor, converted by group regular only */
+#if defined(ADC_CCR_VBATEN)
+#define LL_ADC_AWD_CHANNEL_18_REG ((LL_ADC_CHANNEL_18 & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWDEN | ADC_CFGR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC external channel (channel connected to GPIO pin) ADCx_IN18, converted by group regular only */
+#define LL_ADC_AWD_CH_VBAT_REG ((LL_ADC_CHANNEL_VBAT & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWDEN | ADC_CFGR1_AWDSGL) /*!< ADC analog watchdog monitoring of ADC internal channel connected to Vbat/3: Vbat voltage through a divider ladder of factor 1/3 to have Vbat always below Vdda, converted by group regular only */
+#endif
+/**
+ * @}
+ */
+
+/** @defgroup ADC_LL_EC_AWD_THRESHOLDS Analog watchdog - Thresholds
+ * @{
+ */
+#define LL_ADC_AWD_THRESHOLD_HIGH (ADC_TR_HT ) /*!< ADC analog watchdog threshold high */
+#define LL_ADC_AWD_THRESHOLD_LOW ( ADC_TR_LT) /*!< ADC analog watchdog threshold low */
+#define LL_ADC_AWD_THRESHOLDS_HIGH_LOW (ADC_TR_HT | ADC_TR_LT) /*!< ADC analog watchdog both thresholds high and low concatenated into the same data */
+/**
+ * @}
+ */
+
+
+/** @defgroup ADC_LL_EC_HW_DELAYS Definitions of ADC hardware constraints delays
+ * @note Only ADC IP HW delays are defined in ADC LL driver driver,
+ * not timeout values.
+ * For details on delays values, refer to descriptions in source code
+ * above each literal definition.
+ * @{
+ */
+
+/* Note: Only ADC IP HW delays are defined in ADC LL driver driver, */
+/* not timeout values. */
+/* Timeout values for ADC operations are dependent to device clock */
+/* configuration (system clock versus ADC clock), */
+/* and therefore must be defined in user application. */
+/* Indications for estimation of ADC timeout delays, for this */
+/* STM32 serie: */
+/* - ADC calibration time: maximum delay is 83/fADC. */
+/* (refer to device datasheet, parameter "tCAL") */
+/* - ADC enable time: maximum delay is 1 conversion cycle. */
+/* (refer to device datasheet, parameter "tSTAB") */
+/* - ADC disable time: maximum delay should be a few ADC clock cycles */
+/* - ADC stop conversion time: maximum delay should be a few ADC clock */
+/* cycles */
+/* - ADC conversion time: duration depending on ADC clock and ADC */
+/* configuration. */
+/* (refer to device reference manual, section "Timing") */
+
+
+/* Delay for internal voltage reference stabilization time. */
+/* Delay set to maximum value (refer to device datasheet, */
+/* parameter "tSTART"). */
+/* Unit: us */
+#define LL_ADC_DELAY_VREFINT_STAB_US ( 10U) /*!< Delay for internal voltage reference stabilization time */
+
+/* Delay for temperature sensor stabilization time. */
+/* Literal set to maximum value (refer to device datasheet, */
+/* parameter "tSTART"). */
+/* Unit: us */
+#define LL_ADC_DELAY_TEMPSENSOR_STAB_US ( 10U) /*!< Delay for temperature sensor stabilization time */
+
+/* Delay required between ADC end of calibration and ADC enable. */
+/* Note: On this STM32 serie, a minimum number of ADC clock cycles */
+/* are required between ADC end of calibration and ADC enable. */
+/* Wait time can be computed in user application by waiting for the */
+/* equivalent number of CPU cycles, by taking into account */
+/* ratio of CPU clock versus ADC clock prescalers. */
+/* Unit: ADC clock cycles. */
+#define LL_ADC_DELAY_CALIB_ENABLE_ADC_CYCLES ( 2U) /*!< Delay required between ADC end of calibration and ADC enable */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup ADC_LL_Exported_Macros ADC Exported Macros
+ * @{
+ */
+
+/** @defgroup ADC_LL_EM_WRITE_READ Common write and read registers Macros
+ * @{
+ */
+
+/**
+ * @brief Write a value in ADC register
+ * @param __INSTANCE__ ADC Instance
+ * @param __REG__ Register to be written
+ * @param __VALUE__ Value to be written in the register
+ * @retval None
+ */
+#define LL_ADC_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__))
+
+/**
+ * @brief Read a value in ADC register
+ * @param __INSTANCE__ ADC Instance
+ * @param __REG__ Register to be read
+ * @retval Register value
+ */
+#define LL_ADC_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__)
+/**
+ * @}
+ */
+
+/** @defgroup ADC_LL_EM_HELPER_MACRO ADC helper macro
+ * @{
+ */
+
+/**
+ * @brief Helper macro to get ADC channel number in decimal format
+ * from literals LL_ADC_CHANNEL_x.
+ * @note Example:
+ * __LL_ADC_CHANNEL_TO_DECIMAL_NB(LL_ADC_CHANNEL_4)
+ * will return decimal number "4".
+ * @note The input can be a value from functions where a channel
+ * number is returned, either defined with number
+ * or with bitfield (only one bit must be set).
+ * @param __CHANNEL__ This parameter can be one of the following values:
+ * @arg @ref LL_ADC_CHANNEL_0
+ * @arg @ref LL_ADC_CHANNEL_1
+ * @arg @ref LL_ADC_CHANNEL_2
+ * @arg @ref LL_ADC_CHANNEL_3
+ * @arg @ref LL_ADC_CHANNEL_4
+ * @arg @ref LL_ADC_CHANNEL_5
+ * @arg @ref LL_ADC_CHANNEL_6
+ * @arg @ref LL_ADC_CHANNEL_7
+ * @arg @ref LL_ADC_CHANNEL_8
+ * @arg @ref LL_ADC_CHANNEL_9
+ * @arg @ref LL_ADC_CHANNEL_10
+ * @arg @ref LL_ADC_CHANNEL_11
+ * @arg @ref LL_ADC_CHANNEL_12
+ * @arg @ref LL_ADC_CHANNEL_13
+ * @arg @ref LL_ADC_CHANNEL_14
+ * @arg @ref LL_ADC_CHANNEL_15
+ * @arg @ref LL_ADC_CHANNEL_16
+ * @arg @ref LL_ADC_CHANNEL_17
+ * @arg @ref LL_ADC_CHANNEL_18 (1)
+ * @arg @ref LL_ADC_CHANNEL_VREFINT
+ * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR
+ * @arg @ref LL_ADC_CHANNEL_VBAT (1)
+ *
+ * (1) On STM32F0, parameter not available on all devices: all devices except STM32F030x6, STM32F030x8, STM32F030xC, STM32F070x6, STM32F070xB.
+ * @retval Value between Min_Data=0 and Max_Data=18
+ */
+#define __LL_ADC_CHANNEL_TO_DECIMAL_NB(__CHANNEL__) \
+ ((((__CHANNEL__) & ADC_CHANNEL_ID_BITFIELD_MASK) == 0U) \
+ ? ( \
+ ((__CHANNEL__) & ADC_CHANNEL_ID_NUMBER_MASK) >> ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS \
+ ) \
+ : \
+ ( \
+ (((__CHANNEL__) & ADC_CHSELR_CHSEL0) == ADC_CHSELR_CHSEL0) ? (0U) : \
+ ( \
+ (((__CHANNEL__) & ADC_CHSELR_CHSEL1) == ADC_CHSELR_CHSEL1) ? (1U) : \
+ ( \
+ (((__CHANNEL__) & ADC_CHSELR_CHSEL2) == ADC_CHSELR_CHSEL2) ? (2U) : \
+ ( \
+ (((__CHANNEL__) & ADC_CHSELR_CHSEL3) == ADC_CHSELR_CHSEL3) ? (3U) : \
+ ( \
+ (((__CHANNEL__) & ADC_CHSELR_CHSEL4) == ADC_CHSELR_CHSEL4) ? (4U) : \
+ ( \
+ (((__CHANNEL__) & ADC_CHSELR_CHSEL5) == ADC_CHSELR_CHSEL5) ? (5U) : \
+ ( \
+ (((__CHANNEL__) & ADC_CHSELR_CHSEL6) == ADC_CHSELR_CHSEL6) ? (6U) : \
+ ( \
+ (((__CHANNEL__) & ADC_CHSELR_CHSEL7) == ADC_CHSELR_CHSEL7) ? (7U) : \
+ ( \
+ (((__CHANNEL__) & ADC_CHSELR_CHSEL8) == ADC_CHSELR_CHSEL8) ? (8U) : \
+ ( \
+ (((__CHANNEL__) & ADC_CHSELR_CHSEL9) == ADC_CHSELR_CHSEL9) ? (9U) : \
+ ( \
+ (((__CHANNEL__) & ADC_CHSELR_CHSEL10) == ADC_CHSELR_CHSEL10) ? (10U) : \
+ ( \
+ (((__CHANNEL__) & ADC_CHSELR_CHSEL11) == ADC_CHSELR_CHSEL11) ? (11U) : \
+ ( \
+ (((__CHANNEL__) & ADC_CHSELR_CHSEL12) == ADC_CHSELR_CHSEL12) ? (12U) : \
+ ( \
+ (((__CHANNEL__) & ADC_CHSELR_CHSEL13) == ADC_CHSELR_CHSEL13) ? (13U) : \
+ ( \
+ (((__CHANNEL__) & ADC_CHSELR_CHSEL14) == ADC_CHSELR_CHSEL14) ? (14U) : \
+ ( \
+ (((__CHANNEL__) & ADC_CHSELR_CHSEL15) == ADC_CHSELR_CHSEL15) ? (15U) : \
+ ( \
+ (((__CHANNEL__) & ADC_CHSELR_CHSEL16) == ADC_CHSELR_CHSEL16) ? (16U) : \
+ ( \
+ (((__CHANNEL__) & ADC_CHSELR_CHSEL17) == ADC_CHSELR_CHSEL17) ? (17U) : \
+ ( \
+ (((__CHANNEL__) & ADC_CHSELR_CHSEL18) == ADC_CHSELR_CHSEL18) ? (18U) : \
+ (0U) \
+ ) \
+ ) \
+ ) \
+ ) \
+ ) \
+ ) \
+ ) \
+ ) \
+ ) \
+ ) \
+ ) \
+ ) \
+ ) \
+ ) \
+ ) \
+ ) \
+ ) \
+ ) \
+ ) \
+ )
+
+/**
+ * @brief Helper macro to get ADC channel in literal format LL_ADC_CHANNEL_x
+ * from number in decimal format.
+ * @note Example:
+ * __LL_ADC_DECIMAL_NB_TO_CHANNEL(4)
+ * will return a data equivalent to "LL_ADC_CHANNEL_4".
+ * @param __DECIMAL_NB__ Value between Min_Data=0 and Max_Data=18
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_ADC_CHANNEL_0
+ * @arg @ref LL_ADC_CHANNEL_1
+ * @arg @ref LL_ADC_CHANNEL_2
+ * @arg @ref LL_ADC_CHANNEL_3
+ * @arg @ref LL_ADC_CHANNEL_4
+ * @arg @ref LL_ADC_CHANNEL_5
+ * @arg @ref LL_ADC_CHANNEL_6
+ * @arg @ref LL_ADC_CHANNEL_7
+ * @arg @ref LL_ADC_CHANNEL_8
+ * @arg @ref LL_ADC_CHANNEL_9
+ * @arg @ref LL_ADC_CHANNEL_10
+ * @arg @ref LL_ADC_CHANNEL_11
+ * @arg @ref LL_ADC_CHANNEL_12
+ * @arg @ref LL_ADC_CHANNEL_13
+ * @arg @ref LL_ADC_CHANNEL_14
+ * @arg @ref LL_ADC_CHANNEL_15
+ * @arg @ref LL_ADC_CHANNEL_16
+ * @arg @ref LL_ADC_CHANNEL_17
+ * @arg @ref LL_ADC_CHANNEL_18 (1)
+ * @arg @ref LL_ADC_CHANNEL_VREFINT (2)
+ * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR (2)
+ * @arg @ref LL_ADC_CHANNEL_VBAT (1)(2)
+ *
+ * (1) On STM32F0, parameter not available on all devices: all devices except STM32F030x6, STM32F030x8, STM32F030xC, STM32F070x6, STM32F070xB.\n
+ * (2) For ADC channel read back from ADC register,
+ * comparison with internal channel parameter to be done
+ * using helper macro @ref __LL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL().
+ */
+#define __LL_ADC_DECIMAL_NB_TO_CHANNEL(__DECIMAL_NB__) \
+ ( \
+ ((__DECIMAL_NB__) << ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS) | \
+ (ADC_CHSELR_CHSEL0 << (__DECIMAL_NB__)) \
+ )
+
+/**
+ * @brief Helper macro to determine whether the selected channel
+ * corresponds to literal definitions of driver.
+ * @note The different literal definitions of ADC channels are:
+ * - ADC internal channel:
+ * LL_ADC_CHANNEL_VREFINT, LL_ADC_CHANNEL_TEMPSENSOR, ...
+ * - ADC external channel (channel connected to a GPIO pin):
+ * LL_ADC_CHANNEL_1, LL_ADC_CHANNEL_2, ...
+ * @note The channel parameter must be a value defined from literal
+ * definition of a ADC internal channel (LL_ADC_CHANNEL_VREFINT,
+ * LL_ADC_CHANNEL_TEMPSENSOR, ...),
+ * ADC external channel (LL_ADC_CHANNEL_1, LL_ADC_CHANNEL_2, ...),
+ * must not be a value from functions where a channel number is
+ * returned from ADC registers,
+ * because internal and external channels share the same channel
+ * number in ADC registers. The differentiation is made only with
+ * parameters definitions of driver.
+ * @param __CHANNEL__ This parameter can be one of the following values:
+ * @arg @ref LL_ADC_CHANNEL_0
+ * @arg @ref LL_ADC_CHANNEL_1
+ * @arg @ref LL_ADC_CHANNEL_2
+ * @arg @ref LL_ADC_CHANNEL_3
+ * @arg @ref LL_ADC_CHANNEL_4
+ * @arg @ref LL_ADC_CHANNEL_5
+ * @arg @ref LL_ADC_CHANNEL_6
+ * @arg @ref LL_ADC_CHANNEL_7
+ * @arg @ref LL_ADC_CHANNEL_8
+ * @arg @ref LL_ADC_CHANNEL_9
+ * @arg @ref LL_ADC_CHANNEL_10
+ * @arg @ref LL_ADC_CHANNEL_11
+ * @arg @ref LL_ADC_CHANNEL_12
+ * @arg @ref LL_ADC_CHANNEL_13
+ * @arg @ref LL_ADC_CHANNEL_14
+ * @arg @ref LL_ADC_CHANNEL_15
+ * @arg @ref LL_ADC_CHANNEL_16
+ * @arg @ref LL_ADC_CHANNEL_17
+ * @arg @ref LL_ADC_CHANNEL_18 (1)
+ * @arg @ref LL_ADC_CHANNEL_VREFINT
+ * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR
+ * @arg @ref LL_ADC_CHANNEL_VBAT (1)
+ *
+ * (1) On STM32F0, parameter not available on all devices: all devices except STM32F030x6, STM32F030x8, STM32F030xC, STM32F070x6, STM32F070xB.
+ * @retval Value "0" if the channel corresponds to a parameter definition of a ADC external channel (channel connected to a GPIO pin).
+ * Value "1" if the channel corresponds to a parameter definition of a ADC internal channel.
+ */
+#define __LL_ADC_IS_CHANNEL_INTERNAL(__CHANNEL__) \
+ (((__CHANNEL__) & ADC_CHANNEL_ID_INTERNAL_CH_MASK) != 0U)
+
+/**
+ * @brief Helper macro to convert a channel defined from parameter
+ * definition of a ADC internal channel (LL_ADC_CHANNEL_VREFINT,
+ * LL_ADC_CHANNEL_TEMPSENSOR, ...),
+ * to its equivalent parameter definition of a ADC external channel
+ * (LL_ADC_CHANNEL_1, LL_ADC_CHANNEL_2, ...).
+ * @note The channel parameter can be, additionally to a value
+ * defined from parameter definition of a ADC internal channel
+ * (LL_ADC_CHANNEL_VREFINT, LL_ADC_CHANNEL_TEMPSENSOR, ...),
+ * a value defined from parameter definition of
+ * ADC external channel (LL_ADC_CHANNEL_1, LL_ADC_CHANNEL_2, ...)
+ * or a value from functions where a channel number is returned
+ * from ADC registers.
+ * @param __CHANNEL__ This parameter can be one of the following values:
+ * @arg @ref LL_ADC_CHANNEL_0
+ * @arg @ref LL_ADC_CHANNEL_1
+ * @arg @ref LL_ADC_CHANNEL_2
+ * @arg @ref LL_ADC_CHANNEL_3
+ * @arg @ref LL_ADC_CHANNEL_4
+ * @arg @ref LL_ADC_CHANNEL_5
+ * @arg @ref LL_ADC_CHANNEL_6
+ * @arg @ref LL_ADC_CHANNEL_7
+ * @arg @ref LL_ADC_CHANNEL_8
+ * @arg @ref LL_ADC_CHANNEL_9
+ * @arg @ref LL_ADC_CHANNEL_10
+ * @arg @ref LL_ADC_CHANNEL_11
+ * @arg @ref LL_ADC_CHANNEL_12
+ * @arg @ref LL_ADC_CHANNEL_13
+ * @arg @ref LL_ADC_CHANNEL_14
+ * @arg @ref LL_ADC_CHANNEL_15
+ * @arg @ref LL_ADC_CHANNEL_16
+ * @arg @ref LL_ADC_CHANNEL_17
+ * @arg @ref LL_ADC_CHANNEL_18 (1)
+ * @arg @ref LL_ADC_CHANNEL_VREFINT
+ * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR
+ * @arg @ref LL_ADC_CHANNEL_VBAT (1)
+ *
+ * (1) On STM32F0, parameter not available on all devices: all devices except STM32F030x6, STM32F030x8, STM32F030xC, STM32F070x6, STM32F070xB.
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_ADC_CHANNEL_0
+ * @arg @ref LL_ADC_CHANNEL_1
+ * @arg @ref LL_ADC_CHANNEL_2
+ * @arg @ref LL_ADC_CHANNEL_3
+ * @arg @ref LL_ADC_CHANNEL_4
+ * @arg @ref LL_ADC_CHANNEL_5
+ * @arg @ref LL_ADC_CHANNEL_6
+ * @arg @ref LL_ADC_CHANNEL_7
+ * @arg @ref LL_ADC_CHANNEL_8
+ * @arg @ref LL_ADC_CHANNEL_9
+ * @arg @ref LL_ADC_CHANNEL_10
+ * @arg @ref LL_ADC_CHANNEL_11
+ * @arg @ref LL_ADC_CHANNEL_12
+ * @arg @ref LL_ADC_CHANNEL_13
+ * @arg @ref LL_ADC_CHANNEL_14
+ * @arg @ref LL_ADC_CHANNEL_15
+ * @arg @ref LL_ADC_CHANNEL_16
+ * @arg @ref LL_ADC_CHANNEL_17
+ * @arg @ref LL_ADC_CHANNEL_18
+ */
+#define __LL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL(__CHANNEL__) \
+ ((__CHANNEL__) & ~ADC_CHANNEL_ID_INTERNAL_CH_MASK)
+
+/**
+ * @brief Helper macro to determine whether the internal channel
+ * selected is available on the ADC instance selected.
+ * @note The channel parameter must be a value defined from parameter
+ * definition of a ADC internal channel (LL_ADC_CHANNEL_VREFINT,
+ * LL_ADC_CHANNEL_TEMPSENSOR, ...),
+ * must not be a value defined from parameter definition of
+ * ADC external channel (LL_ADC_CHANNEL_1, LL_ADC_CHANNEL_2, ...)
+ * or a value from functions where a channel number is
+ * returned from ADC registers,
+ * because internal and external channels share the same channel
+ * number in ADC registers. The differentiation is made only with
+ * parameters definitions of driver.
+ * @param __ADC_INSTANCE__ ADC instance
+ * @param __CHANNEL__ This parameter can be one of the following values:
+ * @arg @ref LL_ADC_CHANNEL_VREFINT
+ * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR
+ * @arg @ref LL_ADC_CHANNEL_VBAT (1)
+ *
+ * (1) On STM32F0, parameter not available on all devices: all devices except STM32F030x6, STM32F030x8, STM32F030xC, STM32F070x6, STM32F070xB.
+ * @retval Value "0" if the internal channel selected is not available on the ADC instance selected.
+ * Value "1" if the internal channel selected is available on the ADC instance selected.
+ */
+#if defined(ADC_CCR_VBATEN)
+#define __LL_ADC_IS_CHANNEL_INTERNAL_AVAILABLE(__ADC_INSTANCE__, __CHANNEL__) \
+ ( \
+ ((__CHANNEL__) == LL_ADC_CHANNEL_VREFINT) || \
+ ((__CHANNEL__) == LL_ADC_CHANNEL_TEMPSENSOR) || \
+ ((__CHANNEL__) == LL_ADC_CHANNEL_VBAT) \
+ )
+#else
+#define __LL_ADC_IS_CHANNEL_INTERNAL_AVAILABLE(__ADC_INSTANCE__, __CHANNEL__) \
+ ( \
+ ((__CHANNEL__) == LL_ADC_CHANNEL_VREFINT) || \
+ ((__CHANNEL__) == LL_ADC_CHANNEL_TEMPSENSOR) \
+ )
+#endif
+
+/**
+ * @brief Helper macro to define ADC analog watchdog parameter:
+ * define a single channel to monitor with analog watchdog
+ * from sequencer channel and groups definition.
+ * @note To be used with function @ref LL_ADC_SetAnalogWDMonitChannels().
+ * Example:
+ * LL_ADC_SetAnalogWDMonitChannels(
+ * ADC1, LL_ADC_AWD1,
+ * __LL_ADC_ANALOGWD_CHANNEL_GROUP(LL_ADC_CHANNEL4, LL_ADC_GROUP_REGULAR))
+ * @param __CHANNEL__ This parameter can be one of the following values:
+ * @arg @ref LL_ADC_CHANNEL_0
+ * @arg @ref LL_ADC_CHANNEL_1
+ * @arg @ref LL_ADC_CHANNEL_2
+ * @arg @ref LL_ADC_CHANNEL_3
+ * @arg @ref LL_ADC_CHANNEL_4
+ * @arg @ref LL_ADC_CHANNEL_5
+ * @arg @ref LL_ADC_CHANNEL_6
+ * @arg @ref LL_ADC_CHANNEL_7
+ * @arg @ref LL_ADC_CHANNEL_8
+ * @arg @ref LL_ADC_CHANNEL_9
+ * @arg @ref LL_ADC_CHANNEL_10
+ * @arg @ref LL_ADC_CHANNEL_11
+ * @arg @ref LL_ADC_CHANNEL_12
+ * @arg @ref LL_ADC_CHANNEL_13
+ * @arg @ref LL_ADC_CHANNEL_14
+ * @arg @ref LL_ADC_CHANNEL_15
+ * @arg @ref LL_ADC_CHANNEL_16
+ * @arg @ref LL_ADC_CHANNEL_17
+ * @arg @ref LL_ADC_CHANNEL_18 (1)
+ * @arg @ref LL_ADC_CHANNEL_VREFINT (2)
+ * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR (2)
+ * @arg @ref LL_ADC_CHANNEL_VBAT (1)(2)
+ *
+ * (1) On STM32F0, parameter not available on all devices: all devices except STM32F030x6, STM32F030x8, STM32F030xC, STM32F070x6, STM32F070xB.\n
+ * (2) For ADC channel read back from ADC register,
+ * comparison with internal channel parameter to be done
+ * using helper macro @ref __LL_ADC_CHANNEL_INTERNAL_TO_EXTERNAL().
+ * @param __GROUP__ This parameter can be one of the following values:
+ * @arg @ref LL_ADC_GROUP_REGULAR
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_ADC_AWD_DISABLE
+ * @arg @ref LL_ADC_AWD_ALL_CHANNELS_REG
+ * @arg @ref LL_ADC_AWD_CHANNEL_0_REG
+ * @arg @ref LL_ADC_AWD_CHANNEL_1_REG
+ * @arg @ref LL_ADC_AWD_CHANNEL_2_REG
+ * @arg @ref LL_ADC_AWD_CHANNEL_3_REG
+ * @arg @ref LL_ADC_AWD_CHANNEL_4_REG
+ * @arg @ref LL_ADC_AWD_CHANNEL_5_REG
+ * @arg @ref LL_ADC_AWD_CHANNEL_6_REG
+ * @arg @ref LL_ADC_AWD_CHANNEL_7_REG
+ * @arg @ref LL_ADC_AWD_CHANNEL_8_REG
+ * @arg @ref LL_ADC_AWD_CHANNEL_9_REG
+ * @arg @ref LL_ADC_AWD_CHANNEL_10_REG
+ * @arg @ref LL_ADC_AWD_CHANNEL_11_REG
+ * @arg @ref LL_ADC_AWD_CHANNEL_12_REG
+ * @arg @ref LL_ADC_AWD_CHANNEL_13_REG
+ * @arg @ref LL_ADC_AWD_CHANNEL_14_REG
+ * @arg @ref LL_ADC_AWD_CHANNEL_15_REG
+ * @arg @ref LL_ADC_AWD_CHANNEL_16_REG
+ * @arg @ref LL_ADC_AWD_CHANNEL_17_REG
+ * @arg @ref LL_ADC_AWD_CHANNEL_18_REG (1)
+ * @arg @ref LL_ADC_AWD_CH_VREFINT_REG
+ * @arg @ref LL_ADC_AWD_CH_TEMPSENSOR_REG
+ * @arg @ref LL_ADC_AWD_CH_VBAT_REG (1)
+ *
+ * (1) On STM32F0, parameter not available on all devices: all devices except STM32F030x6, STM32F030x8, STM32F030xC, STM32F070x6, STM32F070xB.
+ */
+#define __LL_ADC_ANALOGWD_CHANNEL_GROUP(__CHANNEL__, __GROUP__) \
+ (((__CHANNEL__) & ADC_CHANNEL_ID_MASK) | ADC_CFGR1_AWDEN | ADC_CFGR1_AWDSGL)
+
+/**
+ * @brief Helper macro to set the value of ADC analog watchdog threshold high
+ * or low in function of ADC resolution, when ADC resolution is
+ * different of 12 bits.
+ * @note To be used with function @ref LL_ADC_ConfigAnalogWDThresholds()
+ * or @ref LL_ADC_SetAnalogWDThresholds().
+ * Example, with a ADC resolution of 8 bits, to set the value of
+ * analog watchdog threshold high (on 8 bits):
+ * LL_ADC_SetAnalogWDThresholds
+ * (< ADCx param >,
+ * __LL_ADC_ANALOGWD_SET_THRESHOLD_RESOLUTION(LL_ADC_RESOLUTION_8B, <threshold_value_8_bits>)
+ * );
+ * @param __ADC_RESOLUTION__ This parameter can be one of the following values:
+ * @arg @ref LL_ADC_RESOLUTION_12B
+ * @arg @ref LL_ADC_RESOLUTION_10B
+ * @arg @ref LL_ADC_RESOLUTION_8B
+ * @arg @ref LL_ADC_RESOLUTION_6B
+ * @param __AWD_THRESHOLD__ Value between Min_Data=0x000 and Max_Data=0xFFF
+ * @retval Value between Min_Data=0x000 and Max_Data=0xFFF
+ */
+#define __LL_ADC_ANALOGWD_SET_THRESHOLD_RESOLUTION(__ADC_RESOLUTION__, __AWD_THRESHOLD__) \
+ ((__AWD_THRESHOLD__) << ((__ADC_RESOLUTION__) >> (ADC_CFGR1_RES_BITOFFSET_POS - 1U )))
+
+/**
+ * @brief Helper macro to get the value of ADC analog watchdog threshold high
+ * or low in function of ADC resolution, when ADC resolution is
+ * different of 12 bits.
+ * @note To be used with function @ref LL_ADC_GetAnalogWDThresholds().
+ * Example, with a ADC resolution of 8 bits, to get the value of
+ * analog watchdog threshold high (on 8 bits):
+ * < threshold_value_6_bits > = __LL_ADC_ANALOGWD_GET_THRESHOLD_RESOLUTION
+ * (LL_ADC_RESOLUTION_8B,
+ * LL_ADC_GetAnalogWDThresholds(<ADCx param>, LL_ADC_AWD_THRESHOLD_HIGH)
+ * );
+ * @param __ADC_RESOLUTION__ This parameter can be one of the following values:
+ * @arg @ref LL_ADC_RESOLUTION_12B
+ * @arg @ref LL_ADC_RESOLUTION_10B
+ * @arg @ref LL_ADC_RESOLUTION_8B
+ * @arg @ref LL_ADC_RESOLUTION_6B
+ * @param __AWD_THRESHOLD_12_BITS__ Value between Min_Data=0x000 and Max_Data=0xFFF
+ * @retval Value between Min_Data=0x000 and Max_Data=0xFFF
+ */
+#define __LL_ADC_ANALOGWD_GET_THRESHOLD_RESOLUTION(__ADC_RESOLUTION__, __AWD_THRESHOLD_12_BITS__) \
+ ((__AWD_THRESHOLD_12_BITS__) >> ((__ADC_RESOLUTION__) >> (ADC_CFGR1_RES_BITOFFSET_POS - 1U )))
+
+/**
+ * @brief Helper macro to get the ADC analog watchdog threshold high
+ * or low from raw value containing both thresholds concatenated.
+ * @note To be used with function @ref LL_ADC_GetAnalogWDThresholds().
+ * Example, to get analog watchdog threshold high from the register raw value:
+ * __LL_ADC_ANALOGWD_THRESHOLDS_HIGH_LOW(LL_ADC_AWD_THRESHOLD_HIGH, <raw_value_with_both_thresholds>);
+ * @param __AWD_THRESHOLD_TYPE__ This parameter can be one of the following values:
+ * @arg @ref LL_ADC_AWD_THRESHOLD_HIGH
+ * @arg @ref LL_ADC_AWD_THRESHOLD_LOW
+ * @param __AWD_THRESHOLDS__ Value between Min_Data=0x00000000 and Max_Data=0xFFFFFFFF
+ * @retval Value between Min_Data=0x000 and Max_Data=0xFFF
+ */
+#define __LL_ADC_ANALOGWD_THRESHOLDS_HIGH_LOW(__AWD_THRESHOLD_TYPE__, __AWD_THRESHOLDS__) \
+ (((__AWD_THRESHOLD_TYPE__) == LL_ADC_AWD_THRESHOLD_LOW) \
+ ? ( \
+ (__AWD_THRESHOLDS__) & LL_ADC_AWD_THRESHOLD_LOW \
+ ) \
+ : \
+ ( \
+ ((__AWD_THRESHOLDS__) >> ADC_TR_HT_BITOFFSET_POS) & LL_ADC_AWD_THRESHOLD_LOW \
+ ) \
+ )
+
+/**
+ * @brief Helper macro to select the ADC common instance
+ * to which is belonging the selected ADC instance.
+ * @note ADC common register instance can be used for:
+ * - Set parameters common to several ADC instances
+ * - Multimode (for devices with several ADC instances)
+ * Refer to functions having argument "ADCxy_COMMON" as parameter.
+ * @param __ADCx__ ADC instance
+ * @retval ADC common register instance
+ */
+#define __LL_ADC_COMMON_INSTANCE(__ADCx__) \
+ (ADC1_COMMON)
+
+/**
+ * @brief Helper macro to check if all ADC instances sharing the same
+ * ADC common instance are disabled.
+ * @note This check is required by functions with setting conditioned to
+ * ADC state:
+ * All ADC instances of the ADC common group must be disabled.
+ * Refer to functions having argument "ADCxy_COMMON" as parameter.
+ * @note On devices with only 1 ADC common instance, parameter of this macro
+ * is useless and can be ignored (parameter kept for compatibility
+ * with devices featuring several ADC common instances).
+ * @param __ADCXY_COMMON__ ADC common instance
+ * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() )
+ * @retval Value "0" if all ADC instances sharing the same ADC common instance
+ * are disabled.
+ * Value "1" if at least one ADC instance sharing the same ADC common instance
+ * is enabled.
+ */
+#define __LL_ADC_IS_ENABLED_ALL_COMMON_INSTANCE(__ADCXY_COMMON__) \
+ LL_ADC_IsEnabled(ADC1)
+
+/**
+ * @brief Helper macro to define the ADC conversion data full-scale digital
+ * value corresponding to the selected ADC resolution.
+ * @note ADC conversion data full-scale corresponds to voltage range
+ * determined by analog voltage references Vref+ and Vref-
+ * (refer to reference manual).
+ * @param __ADC_RESOLUTION__ This parameter can be one of the following values:
+ * @arg @ref LL_ADC_RESOLUTION_12B
+ * @arg @ref LL_ADC_RESOLUTION_10B
+ * @arg @ref LL_ADC_RESOLUTION_8B
+ * @arg @ref LL_ADC_RESOLUTION_6B
+ * @retval ADC conversion data equivalent voltage value (unit: mVolt)
+ */
+#define __LL_ADC_DIGITAL_SCALE(__ADC_RESOLUTION__) \
+ (0xFFFU >> ((__ADC_RESOLUTION__) >> (ADC_CFGR1_RES_BITOFFSET_POS - 1U)))
+
+/**
+ * @brief Helper macro to convert the ADC conversion data from
+ * a resolution to another resolution.
+ * @param __DATA__ ADC conversion data to be converted
+ * @param __ADC_RESOLUTION_CURRENT__ Resolution of to the data to be converted
+ * This parameter can be one of the following values:
+ * @arg @ref LL_ADC_RESOLUTION_12B
+ * @arg @ref LL_ADC_RESOLUTION_10B
+ * @arg @ref LL_ADC_RESOLUTION_8B
+ * @arg @ref LL_ADC_RESOLUTION_6B
+ * @param __ADC_RESOLUTION_TARGET__ Resolution of the data after conversion
+ * This parameter can be one of the following values:
+ * @arg @ref LL_ADC_RESOLUTION_12B
+ * @arg @ref LL_ADC_RESOLUTION_10B
+ * @arg @ref LL_ADC_RESOLUTION_8B
+ * @arg @ref LL_ADC_RESOLUTION_6B
+ * @retval ADC conversion data to the requested resolution
+ */
+#define __LL_ADC_CONVERT_DATA_RESOLUTION(__DATA__, __ADC_RESOLUTION_CURRENT__, __ADC_RESOLUTION_TARGET__) \
+ (((__DATA__) \
+ << ((__ADC_RESOLUTION_CURRENT__) >> (ADC_CFGR1_RES_BITOFFSET_POS - 1U))) \
+ >> ((__ADC_RESOLUTION_TARGET__) >> (ADC_CFGR1_RES_BITOFFSET_POS - 1U)) \
+ )
+
+/**
+ * @brief Helper macro to calculate the voltage (unit: mVolt)
+ * corresponding to a ADC conversion data (unit: digital value).
+ * @note Analog reference voltage (Vref+) must be either known from
+ * user board environment or can be calculated using ADC measurement
+ * and ADC helper macro @ref __LL_ADC_CALC_VREFANALOG_VOLTAGE().
+ * @param __VREFANALOG_VOLTAGE__ Analog reference voltage (unit: mV)
+ * @param __ADC_DATA__ ADC conversion data (resolution 12 bits)
+ * (unit: digital value).
+ * @param __ADC_RESOLUTION__ This parameter can be one of the following values:
+ * @arg @ref LL_ADC_RESOLUTION_12B
+ * @arg @ref LL_ADC_RESOLUTION_10B
+ * @arg @ref LL_ADC_RESOLUTION_8B
+ * @arg @ref LL_ADC_RESOLUTION_6B
+ * @retval ADC conversion data equivalent voltage value (unit: mVolt)
+ */
+#define __LL_ADC_CALC_DATA_TO_VOLTAGE(__VREFANALOG_VOLTAGE__,\
+ __ADC_DATA__,\
+ __ADC_RESOLUTION__) \
+ ((__ADC_DATA__) * (__VREFANALOG_VOLTAGE__) \
+ / __LL_ADC_DIGITAL_SCALE(__ADC_RESOLUTION__) \
+ )
+
+/**
+ * @brief Helper macro to calculate analog reference voltage (Vref+)
+ * (unit: mVolt) from ADC conversion data of internal voltage
+ * reference VrefInt.
+ * @note Computation is using VrefInt calibration value
+ * stored in system memory for each device during production.
+ * @note This voltage depends on user board environment: voltage level
+ * connected to pin Vref+.
+ * On devices with small package, the pin Vref+ is not present
+ * and internally bonded to pin Vdda.
+ * @note On this STM32 serie, calibration data of internal voltage reference
+ * VrefInt corresponds to a resolution of 12 bits,
+ * this is the recommended ADC resolution to convert voltage of
+ * internal voltage reference VrefInt.
+ * Otherwise, this macro performs the processing to scale
+ * ADC conversion data to 12 bits.
+ * @param __VREFINT_ADC_DATA__ ADC conversion data (resolution 12 bits)
+ * of internal voltage reference VrefInt (unit: digital value).
+ * @param __ADC_RESOLUTION__ This parameter can be one of the following values:
+ * @arg @ref LL_ADC_RESOLUTION_12B
+ * @arg @ref LL_ADC_RESOLUTION_10B
+ * @arg @ref LL_ADC_RESOLUTION_8B
+ * @arg @ref LL_ADC_RESOLUTION_6B
+ * @retval Analog reference voltage (unit: mV)
+ */
+#define __LL_ADC_CALC_VREFANALOG_VOLTAGE(__VREFINT_ADC_DATA__,\
+ __ADC_RESOLUTION__) \
+ (((uint32_t)(*VREFINT_CAL_ADDR) * VREFINT_CAL_VREF) \
+ / __LL_ADC_CONVERT_DATA_RESOLUTION((__VREFINT_ADC_DATA__), \
+ (__ADC_RESOLUTION__), \
+ LL_ADC_RESOLUTION_12B) \
+ )
+
+/**
+ * @brief Helper macro to calculate the temperature (unit: degree Celsius)
+ * from ADC conversion data of internal temperature sensor.
+ * @note Computation is using temperature sensor calibration values
+ * stored in system memory for each device during production.
+ * @note Calculation formula:
+ * Temperature = ((TS_ADC_DATA - TS_CAL1)
+ * * (TS_CAL2_TEMP - TS_CAL1_TEMP))
+ * / (TS_CAL2 - TS_CAL1) + TS_CAL1_TEMP
+ * with TS_ADC_DATA = temperature sensor raw data measured by ADC
+ * Avg_Slope = (TS_CAL2 - TS_CAL1)
+ * / (TS_CAL2_TEMP - TS_CAL1_TEMP)
+ * TS_CAL1 = equivalent TS_ADC_DATA at temperature
+ * TEMP_DEGC_CAL1 (calibrated in factory)
+ * TS_CAL2 = equivalent TS_ADC_DATA at temperature
+ * TEMP_DEGC_CAL2 (calibrated in factory)
+ * Caution: Calculation relevancy under reserve that calibration
+ * parameters are correct (address and data).
+ * To calculate temperature using temperature sensor
+ * datasheet typical values (generic values less, therefore
+ * less accurate than calibrated values),
+ * use helper macro @ref __LL_ADC_CALC_TEMPERATURE_TYP_PARAMS().
+ * @note As calculation input, the analog reference voltage (Vref+) must be
+ * defined as it impacts the ADC LSB equivalent voltage.
+ * @note Analog reference voltage (Vref+) must be either known from
+ * user board environment or can be calculated using ADC measurement
+ * and ADC helper macro @ref __LL_ADC_CALC_VREFANALOG_VOLTAGE().
+ * @note On this STM32 serie, calibration data of temperature sensor
+ * corresponds to a resolution of 12 bits,
+ * this is the recommended ADC resolution to convert voltage of
+ * temperature sensor.
+ * Otherwise, this macro performs the processing to scale
+ * ADC conversion data to 12 bits.
+ * @param __VREFANALOG_VOLTAGE__ Analog reference voltage (unit: mV)
+ * @param __TEMPSENSOR_ADC_DATA__ ADC conversion data of internal
+ * temperature sensor (unit: digital value).
+ * @param __ADC_RESOLUTION__ ADC resolution at which internal temperature
+ * sensor voltage has been measured.
+ * This parameter can be one of the following values:
+ * @arg @ref LL_ADC_RESOLUTION_12B
+ * @arg @ref LL_ADC_RESOLUTION_10B
+ * @arg @ref LL_ADC_RESOLUTION_8B
+ * @arg @ref LL_ADC_RESOLUTION_6B
+ * @retval Temperature (unit: degree Celsius)
+ */
+#define __LL_ADC_CALC_TEMPERATURE(__VREFANALOG_VOLTAGE__,\
+ __TEMPSENSOR_ADC_DATA__,\
+ __ADC_RESOLUTION__) \
+ (((( ((int32_t)((__LL_ADC_CONVERT_DATA_RESOLUTION((__TEMPSENSOR_ADC_DATA__), \
+ (__ADC_RESOLUTION__), \
+ LL_ADC_RESOLUTION_12B) \
+ * (__VREFANALOG_VOLTAGE__)) \
+ / TEMPSENSOR_CAL_VREFANALOG) \
+ - (int32_t) *TEMPSENSOR_CAL1_ADDR) \
+ ) * (int32_t)(TEMPSENSOR_CAL2_TEMP - TEMPSENSOR_CAL1_TEMP) \
+ ) / (int32_t)((int32_t)*TEMPSENSOR_CAL2_ADDR - (int32_t)*TEMPSENSOR_CAL1_ADDR) \
+ ) + TEMPSENSOR_CAL1_TEMP \
+ )
+
+/**
+ * @brief Helper macro to calculate the temperature (unit: degree Celsius)
+ * from ADC conversion data of internal temperature sensor.
+ * @note Computation is using temperature sensor typical values
+ * (refer to device datasheet).
+ * @note Calculation formula:
+ * Temperature = (TS_TYP_CALx_VOLT(uV) - TS_ADC_DATA * Conversion_uV)
+ * / Avg_Slope + CALx_TEMP
+ * with TS_ADC_DATA = temperature sensor raw data measured by ADC
+ * (unit: digital value)
+ * Avg_Slope = temperature sensor slope
+ * (unit: uV/Degree Celsius)
+ * TS_TYP_CALx_VOLT = temperature sensor digital value at
+ * temperature CALx_TEMP (unit: mV)
+ * Caution: Calculation relevancy under reserve the temperature sensor
+ * of the current device has characteristics in line with
+ * datasheet typical values.
+ * If temperature sensor calibration values are available on
+ * on this device (presence of macro __LL_ADC_CALC_TEMPERATURE()),
+ * temperature calculation will be more accurate using
+ * helper macro @ref __LL_ADC_CALC_TEMPERATURE().
+ * @note As calculation input, the analog reference voltage (Vref+) must be
+ * defined as it impacts the ADC LSB equivalent voltage.
+ * @note Analog reference voltage (Vref+) must be either known from
+ * user board environment or can be calculated using ADC measurement
+ * and ADC helper macro @ref __LL_ADC_CALC_VREFANALOG_VOLTAGE().
+ * @note ADC measurement data must correspond to a resolution of 12bits
+ * (full scale digital value 4095). If not the case, the data must be
+ * preliminarily rescaled to an equivalent resolution of 12 bits.
+ * @param __TEMPSENSOR_TYP_AVGSLOPE__ Device datasheet data: Temperature sensor slope typical value (unit: uV/DegCelsius).
+ * On STM32F0, refer to device datasheet parameter "Avg_Slope".
+ * @param __TEMPSENSOR_TYP_CALX_V__ Device datasheet data: Temperature sensor voltage typical value (at temperature and Vref+ defined in parameters below) (unit: mV).
+ * On STM32F0, refer to device datasheet parameter "V30" (corresponding to TS_CAL1).
+ * @param __TEMPSENSOR_CALX_TEMP__ Device datasheet data: Temperature at which temperature sensor voltage (see parameter above) is corresponding (unit: mV)
+ * @param __VREFANALOG_VOLTAGE__ Analog voltage reference (Vref+) voltage (unit: mV)
+ * @param __TEMPSENSOR_ADC_DATA__ ADC conversion data of internal temperature sensor (unit: digital value).
+ * @param __ADC_RESOLUTION__ ADC resolution at which internal temperature sensor voltage has been measured.
+ * This parameter can be one of the following values:
+ * @arg @ref LL_ADC_RESOLUTION_12B
+ * @arg @ref LL_ADC_RESOLUTION_10B
+ * @arg @ref LL_ADC_RESOLUTION_8B
+ * @arg @ref LL_ADC_RESOLUTION_6B
+ * @retval Temperature (unit: degree Celsius)
+ */
+#define __LL_ADC_CALC_TEMPERATURE_TYP_PARAMS(__TEMPSENSOR_TYP_AVGSLOPE__,\
+ __TEMPSENSOR_TYP_CALX_V__,\
+ __TEMPSENSOR_CALX_TEMP__,\
+ __VREFANALOG_VOLTAGE__,\
+ __TEMPSENSOR_ADC_DATA__,\
+ __ADC_RESOLUTION__) \
+ ((( ( \
+ (int32_t)(((__TEMPSENSOR_TYP_CALX_V__)) \
+ * 1000) \
+ - \
+ (int32_t)((((__TEMPSENSOR_ADC_DATA__) * (__VREFANALOG_VOLTAGE__)) \
+ / __LL_ADC_DIGITAL_SCALE(__ADC_RESOLUTION__)) \
+ * 1000) \
+ ) \
+ ) / (__TEMPSENSOR_TYP_AVGSLOPE__) \
+ ) + (__TEMPSENSOR_CALX_TEMP__) \
+ )
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup ADC_LL_Exported_Functions ADC Exported Functions
+ * @{
+ */
+
+/** @defgroup ADC_LL_EF_DMA_Management ADC DMA management
+ * @{
+ */
+/* Note: LL ADC functions to set DMA transfer are located into sections of */
+/* configuration of ADC instance, groups and multimode (if available): */
+/* @ref LL_ADC_REG_SetDMATransfer(), ... */
+
+/**
+ * @brief Function to help to configure DMA transfer from ADC: retrieve the
+ * ADC register address from ADC instance and a list of ADC registers
+ * intended to be used (most commonly) with DMA transfer.
+ * @note These ADC registers are data registers:
+ * when ADC conversion data is available in ADC data registers,
+ * ADC generates a DMA transfer request.
+ * @note This macro is intended to be used with LL DMA driver, refer to
+ * function "LL_DMA_ConfigAddresses()".
+ * Example:
+ * LL_DMA_ConfigAddresses(DMA1,
+ * LL_DMA_CHANNEL_1,
+ * LL_ADC_DMA_GetRegAddr(ADC1, LL_ADC_DMA_REG_REGULAR_DATA),
+ * (uint32_t)&< array or variable >,
+ * LL_DMA_DIRECTION_PERIPH_TO_MEMORY);
+ * @note For devices with several ADC: in multimode, some devices
+ * use a different data register outside of ADC instance scope
+ * (common data register). This macro manages this register difference,
+ * only ADC instance has to be set as parameter.
+ * @rmtoll DR DATA LL_ADC_DMA_GetRegAddr
+ * @param ADCx ADC instance
+ * @param Register This parameter can be one of the following values:
+ * @arg @ref LL_ADC_DMA_REG_REGULAR_DATA
+ * @retval ADC register address
+ */
+__STATIC_INLINE uint32_t LL_ADC_DMA_GetRegAddr(ADC_TypeDef *ADCx, uint32_t Register)
+{
+ /* Retrieve address of register DR */
+ return (uint32_t)&(ADCx->DR);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup ADC_LL_EF_Configuration_ADC_Common Configuration of ADC hierarchical scope: common to several ADC instances
+ * @{
+ */
+
+/**
+ * @brief Set parameter common to several ADC: measurement path to internal
+ * channels (VrefInt, temperature sensor, ...).
+ * @note One or several values can be selected.
+ * Example: (LL_ADC_PATH_INTERNAL_VREFINT |
+ * LL_ADC_PATH_INTERNAL_TEMPSENSOR)
+ * @note Stabilization time of measurement path to internal channel:
+ * After enabling internal paths, before starting ADC conversion,
+ * a delay is required for internal voltage reference and
+ * temperature sensor stabilization time.
+ * Refer to device datasheet.
+ * Refer to literal @ref LL_ADC_DELAY_VREFINT_STAB_US.
+ * Refer to literal @ref LL_ADC_DELAY_TEMPSENSOR_STAB_US.
+ * @note ADC internal channel sampling time constraint:
+ * For ADC conversion of internal channels,
+ * a sampling time minimum value is required.
+ * Refer to device datasheet.
+ * @note On this STM32 serie, setting of this feature is conditioned to
+ * ADC state:
+ * All ADC instances of the ADC common group must be disabled.
+ * This check can be done with function @ref LL_ADC_IsEnabled() for each
+ * ADC instance or by using helper macro helper macro
+ * @ref __LL_ADC_IS_ENABLED_ALL_COMMON_INSTANCE().
+ * @rmtoll CCR VREFEN LL_ADC_SetCommonPathInternalCh\n
+ * CCR TSEN LL_ADC_SetCommonPathInternalCh\n
+ * CCR VBATEN LL_ADC_SetCommonPathInternalCh
+ * @param ADCxy_COMMON ADC common instance
+ * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() )
+ * @param PathInternal This parameter can be a combination of the following values:
+ * @arg @ref LL_ADC_PATH_INTERNAL_NONE
+ * @arg @ref LL_ADC_PATH_INTERNAL_VREFINT
+ * @arg @ref LL_ADC_PATH_INTERNAL_TEMPSENSOR
+ * @arg @ref LL_ADC_PATH_INTERNAL_VBAT (1)
+ *
+ * (1) On STM32F0, parameter not available on all devices: all devices except STM32F030x6, STM32F030x8, STM32F030xC, STM32F070x6, STM32F070xB.
+ * @retval None
+ */
+__STATIC_INLINE void LL_ADC_SetCommonPathInternalCh(ADC_Common_TypeDef *ADCxy_COMMON, uint32_t PathInternal)
+{
+#if defined(ADC_CCR_VBATEN)
+ MODIFY_REG(ADCxy_COMMON->CCR, ADC_CCR_VREFEN | ADC_CCR_TSEN | ADC_CCR_VBATEN, PathInternal);
+#else
+ MODIFY_REG(ADCxy_COMMON->CCR, ADC_CCR_VREFEN | ADC_CCR_TSEN, PathInternal);
+#endif
+}
+
+/**
+ * @brief Get parameter common to several ADC: measurement path to internal
+ * channels (VrefInt, temperature sensor, ...).
+ * @note One or several values can be selected.
+ * Example: (LL_ADC_PATH_INTERNAL_VREFINT |
+ * LL_ADC_PATH_INTERNAL_TEMPSENSOR)
+ * @rmtoll CCR VREFEN LL_ADC_GetCommonPathInternalCh\n
+ * CCR TSEN LL_ADC_GetCommonPathInternalCh\n
+ * CCR VBATEN LL_ADC_GetCommonPathInternalCh
+ * @param ADCxy_COMMON ADC common instance
+ * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() )
+ * @retval Returned value can be a combination of the following values:
+ * @arg @ref LL_ADC_PATH_INTERNAL_NONE
+ * @arg @ref LL_ADC_PATH_INTERNAL_VREFINT
+ * @arg @ref LL_ADC_PATH_INTERNAL_TEMPSENSOR
+ * @arg @ref LL_ADC_PATH_INTERNAL_VBAT (1)
+ *
+ * (1) On STM32F0, parameter not available on all devices: all devices except STM32F030x6, STM32F030x8, STM32F030xC, STM32F070x6, STM32F070xB.
+ */
+__STATIC_INLINE uint32_t LL_ADC_GetCommonPathInternalCh(ADC_Common_TypeDef *ADCxy_COMMON)
+{
+#if defined(ADC_CCR_VBATEN)
+ return (uint32_t)(READ_BIT(ADCxy_COMMON->CCR, ADC_CCR_VREFEN | ADC_CCR_TSEN | ADC_CCR_VBATEN));
+#else
+ return (uint32_t)(READ_BIT(ADCxy_COMMON->CCR, ADC_CCR_VREFEN | ADC_CCR_TSEN));
+#endif
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup ADC_LL_EF_Configuration_ADC_Instance Configuration of ADC hierarchical scope: ADC instance
+ * @{
+ */
+
+/**
+ * @brief Set ADC instance clock source and prescaler.
+ * @note On this STM32 serie, setting of this feature is conditioned to
+ * ADC state:
+ * ADC must be disabled.
+ * @rmtoll CFGR2 CKMODE LL_ADC_SetClock
+ * @param ADCx ADC instance
+ * @param ClockSource This parameter can be one of the following values:
+ * @arg @ref LL_ADC_CLOCK_SYNC_PCLK_DIV4
+ * @arg @ref LL_ADC_CLOCK_SYNC_PCLK_DIV2
+ * @arg @ref LL_ADC_CLOCK_ASYNC (1)
+ *
+ * (1) On this STM32 serie, synchronous clock has no prescaler.
+ * @retval None
+ */
+__STATIC_INLINE void LL_ADC_SetClock(ADC_TypeDef *ADCx, uint32_t ClockSource)
+{
+ MODIFY_REG(ADCx->CFGR2, ADC_CFGR2_CKMODE, ClockSource);
+}
+
+/**
+ * @brief Get ADC instance clock source and prescaler.
+ * @rmtoll CFGR2 CKMODE LL_ADC_GetClock
+ * @param ADCx ADC instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_ADC_CLOCK_SYNC_PCLK_DIV4
+ * @arg @ref LL_ADC_CLOCK_SYNC_PCLK_DIV2
+ * @arg @ref LL_ADC_CLOCK_ASYNC (1)
+ *
+ * (1) On this STM32 serie, synchronous clock has no prescaler.
+ */
+__STATIC_INLINE uint32_t LL_ADC_GetClock(ADC_TypeDef *ADCx)
+{
+ return (uint32_t)(READ_BIT(ADCx->CFGR2, ADC_CFGR2_CKMODE));
+}
+
+/**
+ * @brief Set ADC resolution.
+ * Refer to reference manual for alignments formats
+ * dependencies to ADC resolutions.
+ * @note On this STM32 serie, setting of this feature is conditioned to
+ * ADC state:
+ * ADC must be disabled or enabled without conversion on going
+ * on group regular.
+ * @rmtoll CFGR1 RES LL_ADC_SetResolution
+ * @param ADCx ADC instance
+ * @param Resolution This parameter can be one of the following values:
+ * @arg @ref LL_ADC_RESOLUTION_12B
+ * @arg @ref LL_ADC_RESOLUTION_10B
+ * @arg @ref LL_ADC_RESOLUTION_8B
+ * @arg @ref LL_ADC_RESOLUTION_6B
+ * @retval None
+ */
+__STATIC_INLINE void LL_ADC_SetResolution(ADC_TypeDef *ADCx, uint32_t Resolution)
+{
+ MODIFY_REG(ADCx->CFGR1, ADC_CFGR1_RES, Resolution);
+}
+
+/**
+ * @brief Get ADC resolution.
+ * Refer to reference manual for alignments formats
+ * dependencies to ADC resolutions.
+ * @rmtoll CFGR1 RES LL_ADC_GetResolution
+ * @param ADCx ADC instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_ADC_RESOLUTION_12B
+ * @arg @ref LL_ADC_RESOLUTION_10B
+ * @arg @ref LL_ADC_RESOLUTION_8B
+ * @arg @ref LL_ADC_RESOLUTION_6B
+ */
+__STATIC_INLINE uint32_t LL_ADC_GetResolution(ADC_TypeDef *ADCx)
+{
+ return (uint32_t)(READ_BIT(ADCx->CFGR1, ADC_CFGR1_RES));
+}
+
+/**
+ * @brief Set ADC conversion data alignment.
+ * @note Refer to reference manual for alignments formats
+ * dependencies to ADC resolutions.
+ * @note On this STM32 serie, setting of this feature is conditioned to
+ * ADC state:
+ * ADC must be disabled or enabled without conversion on going
+ * on group regular.
+ * @rmtoll CFGR1 ALIGN LL_ADC_SetDataAlignment
+ * @param ADCx ADC instance
+ * @param DataAlignment This parameter can be one of the following values:
+ * @arg @ref LL_ADC_DATA_ALIGN_RIGHT
+ * @arg @ref LL_ADC_DATA_ALIGN_LEFT
+ * @retval None
+ */
+__STATIC_INLINE void LL_ADC_SetDataAlignment(ADC_TypeDef *ADCx, uint32_t DataAlignment)
+{
+ MODIFY_REG(ADCx->CFGR1, ADC_CFGR1_ALIGN, DataAlignment);
+}
+
+/**
+ * @brief Get ADC conversion data alignment.
+ * @note Refer to reference manual for alignments formats
+ * dependencies to ADC resolutions.
+ * @rmtoll CFGR1 ALIGN LL_ADC_GetDataAlignment
+ * @param ADCx ADC instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_ADC_DATA_ALIGN_RIGHT
+ * @arg @ref LL_ADC_DATA_ALIGN_LEFT
+ */
+__STATIC_INLINE uint32_t LL_ADC_GetDataAlignment(ADC_TypeDef *ADCx)
+{
+ return (uint32_t)(READ_BIT(ADCx->CFGR1, ADC_CFGR1_ALIGN));
+}
+
+/**
+ * @brief Set ADC low power mode.
+ * @note Description of ADC low power modes:
+ * - ADC low power mode "auto wait": Dynamic low power mode,
+ * ADC conversions occurrences are limited to the minimum necessary
+ * in order to reduce power consumption.
+ * New ADC conversion starts only when the previous
+ * unitary conversion data (for ADC group regular)
+ * has been retrieved by user software.
+ * In the meantime, ADC remains idle: does not performs any
+ * other conversion.
+ * This mode allows to automatically adapt the ADC conversions
+ * triggers to the speed of the software that reads the data.
+ * Moreover, this avoids risk of overrun for low frequency
+ * applications.
+ * How to use this low power mode:
+ * - Do not use with interruption or DMA since these modes
+ * have to clear immediately the EOC flag to free the
+ * IRQ vector sequencer.
+ * - Do use with polling: 1. Start conversion,
+ * 2. Later on, when conversion data is needed: poll for end of
+ * conversion to ensure that conversion is completed and
+ * retrieve ADC conversion data. This will trig another
+ * ADC conversion start.
+ * - ADC low power mode "auto power-off" (feature available on
+ * this device if parameter LL_ADC_LP_MODE_AUTOOFF is available):
+ * the ADC automatically powers-off after a conversion and
+ * automatically wakes up when a new conversion is triggered
+ * (with startup time between trigger and start of sampling).
+ * This feature can be combined with low power mode "auto wait".
+ * @note With ADC low power mode "auto wait", the ADC conversion data read
+ * is corresponding to previous ADC conversion start, independently
+ * of delay during which ADC was idle.
+ * Therefore, the ADC conversion data may be outdated: does not
+ * correspond to the current voltage level on the selected
+ * ADC channel.
+ * @note On this STM32 serie, setting of this feature is conditioned to
+ * ADC state:
+ * ADC must be disabled or enabled without conversion on going
+ * on group regular.
+ * @rmtoll CFGR1 WAIT LL_ADC_SetLowPowerMode\n
+ * CFGR1 AUTOFF LL_ADC_SetLowPowerMode
+ * @param ADCx ADC instance
+ * @param LowPowerMode This parameter can be one of the following values:
+ * @arg @ref LL_ADC_LP_MODE_NONE
+ * @arg @ref LL_ADC_LP_AUTOWAIT
+ * @arg @ref LL_ADC_LP_AUTOPOWEROFF
+ * @arg @ref LL_ADC_LP_AUTOWAIT_AUTOPOWEROFF
+ * @retval None
+ */
+__STATIC_INLINE void LL_ADC_SetLowPowerMode(ADC_TypeDef *ADCx, uint32_t LowPowerMode)
+{
+ MODIFY_REG(ADCx->CFGR1, (ADC_CFGR1_WAIT | ADC_CFGR1_AUTOFF), LowPowerMode);
+}
+
+/**
+ * @brief Get ADC low power mode:
+ * @note Description of ADC low power modes:
+ * - ADC low power mode "auto wait": Dynamic low power mode,
+ * ADC conversions occurrences are limited to the minimum necessary
+ * in order to reduce power consumption.
+ * New ADC conversion starts only when the previous
+ * unitary conversion data (for ADC group regular)
+ * has been retrieved by user software.
+ * In the meantime, ADC remains idle: does not performs any
+ * other conversion.
+ * This mode allows to automatically adapt the ADC conversions
+ * triggers to the speed of the software that reads the data.
+ * Moreover, this avoids risk of overrun for low frequency
+ * applications.
+ * How to use this low power mode:
+ * - Do not use with interruption or DMA since these modes
+ * have to clear immediately the EOC flag to free the
+ * IRQ vector sequencer.
+ * - Do use with polling: 1. Start conversion,
+ * 2. Later on, when conversion data is needed: poll for end of
+ * conversion to ensure that conversion is completed and
+ * retrieve ADC conversion data. This will trig another
+ * ADC conversion start.
+ * - ADC low power mode "auto power-off" (feature available on
+ * this device if parameter LL_ADC_LP_MODE_AUTOOFF is available):
+ * the ADC automatically powers-off after a conversion and
+ * automatically wakes up when a new conversion is triggered
+ * (with startup time between trigger and start of sampling).
+ * This feature can be combined with low power mode "auto wait".
+ * @note With ADC low power mode "auto wait", the ADC conversion data read
+ * is corresponding to previous ADC conversion start, independently
+ * of delay during which ADC was idle.
+ * Therefore, the ADC conversion data may be outdated: does not
+ * correspond to the current voltage level on the selected
+ * ADC channel.
+ * @rmtoll CFGR1 WAIT LL_ADC_GetLowPowerMode\n
+ * CFGR1 AUTOFF LL_ADC_GetLowPowerMode
+ * @param ADCx ADC instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_ADC_LP_MODE_NONE
+ * @arg @ref LL_ADC_LP_AUTOWAIT
+ * @arg @ref LL_ADC_LP_AUTOPOWEROFF
+ * @arg @ref LL_ADC_LP_AUTOWAIT_AUTOPOWEROFF
+ */
+__STATIC_INLINE uint32_t LL_ADC_GetLowPowerMode(ADC_TypeDef *ADCx)
+{
+ return (uint32_t)(READ_BIT(ADCx->CFGR1, (ADC_CFGR1_WAIT | ADC_CFGR1_AUTOFF)));
+}
+
+/**
+ * @brief Set sampling time common to a group of channels.
+ * @note Unit: ADC clock cycles.
+ * @note On this STM32 serie, sampling time scope is on ADC instance:
+ * Sampling time common to all channels.
+ * (on some other STM32 families, sampling time is channel wise)
+ * @note In case of internal channel (VrefInt, TempSensor, ...) to be
+ * converted:
+ * sampling time constraints must be respected (sampling time can be
+ * adjusted in function of ADC clock frequency and sampling time
+ * setting).
+ * Refer to device datasheet for timings values (parameters TS_vrefint,
+ * TS_temp, ...).
+ * @note Conversion time is the addition of sampling time and processing time.
+ * On this STM32 serie, ADC processing time is:
+ * - 12.5 ADC clock cycles at ADC resolution 12 bits
+ * - 10.5 ADC clock cycles at ADC resolution 10 bits
+ * - 8.5 ADC clock cycles at ADC resolution 8 bits
+ * - 6.5 ADC clock cycles at ADC resolution 6 bits
+ * @note In case of ADC conversion of internal channel (VrefInt,
+ * temperature sensor, ...), a sampling time minimum value
+ * is required.
+ * Refer to device datasheet.
+ * @note On this STM32 serie, setting of this feature is conditioned to
+ * ADC state:
+ * ADC must be disabled or enabled without conversion on going
+ * on group regular.
+ * @rmtoll SMPR SMP LL_ADC_SetSamplingTimeCommonChannels
+ * @param ADCx ADC instance
+ * @param SamplingTime This parameter can be one of the following values:
+ * @arg @ref LL_ADC_SAMPLINGTIME_1CYCLE_5
+ * @arg @ref LL_ADC_SAMPLINGTIME_7CYCLES_5
+ * @arg @ref LL_ADC_SAMPLINGTIME_13CYCLES_5
+ * @arg @ref LL_ADC_SAMPLINGTIME_28CYCLES_5
+ * @arg @ref LL_ADC_SAMPLINGTIME_41CYCLES_5
+ * @arg @ref LL_ADC_SAMPLINGTIME_55CYCLES_5
+ * @arg @ref LL_ADC_SAMPLINGTIME_71CYCLES_5
+ * @arg @ref LL_ADC_SAMPLINGTIME_239CYCLES_5
+ * @retval None
+ */
+__STATIC_INLINE void LL_ADC_SetSamplingTimeCommonChannels(ADC_TypeDef *ADCx, uint32_t SamplingTime)
+{
+ MODIFY_REG(ADCx->SMPR, ADC_SMPR_SMP, SamplingTime);
+}
+
+/**
+ * @brief Get sampling time common to a group of channels.
+ * @note Unit: ADC clock cycles.
+ * @note On this STM32 serie, sampling time scope is on ADC instance:
+ * Sampling time common to all channels.
+ * (on some other STM32 families, sampling time is channel wise)
+ * @note Conversion time is the addition of sampling time and processing time.
+ * Refer to reference manual for ADC processing time of
+ * this STM32 serie.
+ * @rmtoll SMPR SMP LL_ADC_GetSamplingTimeCommonChannels
+ * @param ADCx ADC instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_ADC_SAMPLINGTIME_1CYCLE_5
+ * @arg @ref LL_ADC_SAMPLINGTIME_7CYCLES_5
+ * @arg @ref LL_ADC_SAMPLINGTIME_13CYCLES_5
+ * @arg @ref LL_ADC_SAMPLINGTIME_28CYCLES_5
+ * @arg @ref LL_ADC_SAMPLINGTIME_41CYCLES_5
+ * @arg @ref LL_ADC_SAMPLINGTIME_55CYCLES_5
+ * @arg @ref LL_ADC_SAMPLINGTIME_71CYCLES_5
+ * @arg @ref LL_ADC_SAMPLINGTIME_239CYCLES_5
+ */
+__STATIC_INLINE uint32_t LL_ADC_GetSamplingTimeCommonChannels(ADC_TypeDef *ADCx)
+{
+ return (uint32_t)(READ_BIT(ADCx->SMPR, ADC_SMPR_SMP));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup ADC_LL_EF_Configuration_ADC_Group_Regular Configuration of ADC hierarchical scope: group regular
+ * @{
+ */
+
+/**
+ * @brief Set ADC group regular conversion trigger source:
+ * internal (SW start) or from external IP (timer event,
+ * external interrupt line).
+ * @note On this STM32 serie, setting trigger source to external trigger
+ * also set trigger polarity to rising edge
+ * (default setting for compatibility with some ADC on other
+ * STM32 families having this setting set by HW default value).
+ * In case of need to modify trigger edge, use
+ * function @ref LL_ADC_REG_SetTriggerEdge().
+ * @note Availability of parameters of trigger sources from timer
+ * depends on timers availability on the selected device.
+ * @note On this STM32 serie, setting of this feature is conditioned to
+ * ADC state:
+ * ADC must be disabled or enabled without conversion on going
+ * on group regular.
+ * @rmtoll CFGR1 EXTSEL LL_ADC_REG_SetTriggerSource\n
+ * CFGR1 EXTEN LL_ADC_REG_SetTriggerSource
+ * @param ADCx ADC instance
+ * @param TriggerSource This parameter can be one of the following values:
+ * @arg @ref LL_ADC_REG_TRIG_SOFTWARE
+ * @arg @ref LL_ADC_REG_TRIG_EXT_TIM1_TRGO
+ * @arg @ref LL_ADC_REG_TRIG_EXT_TIM1_CH4
+ * @arg @ref LL_ADC_REG_TRIG_EXT_TIM2_TRGO (1)
+ * @arg @ref LL_ADC_REG_TRIG_EXT_TIM3_TRGO
+ * @arg @ref LL_ADC_REG_TRIG_EXT_TIM15_TRGO (1)
+ *
+ * (1) On STM32F0, parameter not available on all devices
+ * @retval None
+ */
+__STATIC_INLINE void LL_ADC_REG_SetTriggerSource(ADC_TypeDef *ADCx, uint32_t TriggerSource)
+{
+ MODIFY_REG(ADCx->CFGR1, ADC_CFGR1_EXTEN | ADC_CFGR1_EXTSEL, TriggerSource);
+}
+
+/**
+ * @brief Get ADC group regular conversion trigger source:
+ * internal (SW start) or from external IP (timer event,
+ * external interrupt line).
+ * @note To determine whether group regular trigger source is
+ * internal (SW start) or external, without detail
+ * of which peripheral is selected as external trigger,
+ * (equivalent to
+ * "if(LL_ADC_REG_GetTriggerSource(ADC1) == LL_ADC_REG_TRIG_SOFTWARE)")
+ * use function @ref LL_ADC_REG_IsTriggerSourceSWStart.
+ * @note Availability of parameters of trigger sources from timer
+ * depends on timers availability on the selected device.
+ * @rmtoll CFGR1 EXTSEL LL_ADC_REG_GetTriggerSource\n
+ * CFGR1 EXTEN LL_ADC_REG_GetTriggerSource
+ * @param ADCx ADC instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_ADC_REG_TRIG_SOFTWARE
+ * @arg @ref LL_ADC_REG_TRIG_EXT_TIM1_TRGO
+ * @arg @ref LL_ADC_REG_TRIG_EXT_TIM1_CH4
+ * @arg @ref LL_ADC_REG_TRIG_EXT_TIM2_TRGO (1)
+ * @arg @ref LL_ADC_REG_TRIG_EXT_TIM3_TRGO
+ * @arg @ref LL_ADC_REG_TRIG_EXT_TIM15_TRGO (1)
+ *
+ * (1) On STM32F0, parameter not available on all devices
+ */
+__STATIC_INLINE uint32_t LL_ADC_REG_GetTriggerSource(ADC_TypeDef *ADCx)
+{
+ register uint32_t TriggerSource = READ_BIT(ADCx->CFGR1, ADC_CFGR1_EXTSEL | ADC_CFGR1_EXTEN);
+
+ /* Value for shift of {0; 4; 8; 12} depending on value of bitfield */
+ /* corresponding to ADC_CFGR1_EXTEN {0; 1; 2; 3}. */
+ register uint32_t ShiftExten = ((TriggerSource & ADC_CFGR1_EXTEN) >> (ADC_REG_TRIG_EXTEN_BITOFFSET_POS - 2U));
+
+ /* Set bitfield corresponding to ADC_CFGR1_EXTEN and ADC_CFGR1_EXTSEL */
+ /* to match with triggers literals definition. */
+ return ((TriggerSource
+ & (ADC_REG_TRIG_SOURCE_MASK >> ShiftExten) & ADC_CFGR1_EXTSEL)
+ | ((ADC_REG_TRIG_EDGE_MASK >> ShiftExten) & ADC_CFGR1_EXTEN)
+ );
+}
+
+/**
+ * @brief Get ADC group regular conversion trigger source internal (SW start)
+ or external.
+ * @note In case of group regular trigger source set to external trigger,
+ * to determine which peripheral is selected as external trigger,
+ * use function @ref LL_ADC_REG_GetTriggerSource().
+ * @rmtoll CFGR1 EXTEN LL_ADC_REG_IsTriggerSourceSWStart
+ * @param ADCx ADC instance
+ * @retval Value "0" if trigger source external trigger
+ * Value "1" if trigger source SW start.
+ */
+__STATIC_INLINE uint32_t LL_ADC_REG_IsTriggerSourceSWStart(ADC_TypeDef *ADCx)
+{
+ return (READ_BIT(ADCx->CFGR1, ADC_CFGR1_EXTEN) == (LL_ADC_REG_TRIG_SOFTWARE & ADC_CFGR1_EXTEN));
+}
+
+/**
+ * @brief Set ADC group regular conversion trigger polarity.
+ * @note Applicable only for trigger source set to external trigger.
+ * @note On this STM32 serie, setting of this feature is conditioned to
+ * ADC state:
+ * ADC must be disabled or enabled without conversion on going
+ * on group regular.
+ * @rmtoll CFGR1 EXTEN LL_ADC_REG_SetTriggerEdge
+ * @param ADCx ADC instance
+ * @param ExternalTriggerEdge This parameter can be one of the following values:
+ * @arg @ref LL_ADC_REG_TRIG_EXT_RISING
+ * @arg @ref LL_ADC_REG_TRIG_EXT_FALLING
+ * @arg @ref LL_ADC_REG_TRIG_EXT_RISINGFALLING
+ * @retval None
+ */
+__STATIC_INLINE void LL_ADC_REG_SetTriggerEdge(ADC_TypeDef *ADCx, uint32_t ExternalTriggerEdge)
+{
+ MODIFY_REG(ADCx->CFGR1, ADC_CFGR1_EXTEN, ExternalTriggerEdge);
+}
+
+/**
+ * @brief Get ADC group regular conversion trigger polarity.
+ * @note Applicable only for trigger source set to external trigger.
+ * @rmtoll CFGR1 EXTEN LL_ADC_REG_GetTriggerEdge
+ * @param ADCx ADC instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_ADC_REG_TRIG_EXT_RISING
+ * @arg @ref LL_ADC_REG_TRIG_EXT_FALLING
+ * @arg @ref LL_ADC_REG_TRIG_EXT_RISINGFALLING
+ */
+__STATIC_INLINE uint32_t LL_ADC_REG_GetTriggerEdge(ADC_TypeDef *ADCx)
+{
+ return (uint32_t)(READ_BIT(ADCx->CFGR1, ADC_CFGR1_EXTEN));
+}
+
+
+/**
+ * @brief Set ADC group regular sequencer scan direction.
+ * @note On some other STM32 families, this setting is not available and
+ * the default scan direction is forward.
+ * @note On this STM32 serie, setting of this feature is conditioned to
+ * ADC state:
+ * ADC must be disabled or enabled without conversion on going
+ * on group regular.
+ * @rmtoll CFGR1 SCANDIR LL_ADC_REG_SetSequencerScanDirection
+ * @param ADCx ADC instance
+ * @param ScanDirection This parameter can be one of the following values:
+ * @arg @ref LL_ADC_REG_SEQ_SCAN_DIR_FORWARD
+ * @arg @ref LL_ADC_REG_SEQ_SCAN_DIR_BACKWARD
+ * @retval None
+ */
+__STATIC_INLINE void LL_ADC_REG_SetSequencerScanDirection(ADC_TypeDef *ADCx, uint32_t ScanDirection)
+{
+ MODIFY_REG(ADCx->CFGR1, ADC_CFGR1_SCANDIR, ScanDirection);
+}
+
+/**
+ * @brief Get ADC group regular sequencer scan direction.
+ * @note On some other STM32 families, this setting is not available and
+ * the default scan direction is forward.
+ * @rmtoll CFGR1 SCANDIR LL_ADC_REG_GetSequencerScanDirection
+ * @param ADCx ADC instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_ADC_REG_SEQ_SCAN_DIR_FORWARD
+ * @arg @ref LL_ADC_REG_SEQ_SCAN_DIR_BACKWARD
+ */
+__STATIC_INLINE uint32_t LL_ADC_REG_GetSequencerScanDirection(ADC_TypeDef *ADCx)
+{
+ return (uint32_t)(READ_BIT(ADCx->CFGR1, ADC_CFGR1_SCANDIR));
+}
+
+/**
+ * @brief Set ADC group regular sequencer discontinuous mode:
+ * sequence subdivided and scan conversions interrupted every selected
+ * number of ranks.
+ * @note It is not possible to enable both ADC group regular
+ * continuous mode and sequencer discontinuous mode.
+ * @note On this STM32 serie, setting of this feature is conditioned to
+ * ADC state:
+ * ADC must be disabled or enabled without conversion on going
+ * on group regular.
+ * @rmtoll CFGR1 DISCEN LL_ADC_REG_SetSequencerDiscont\n
+ * @param ADCx ADC instance
+ * @param SeqDiscont This parameter can be one of the following values:
+ * @arg @ref LL_ADC_REG_SEQ_DISCONT_DISABLE
+ * @arg @ref LL_ADC_REG_SEQ_DISCONT_1RANK
+ * @retval None
+ */
+__STATIC_INLINE void LL_ADC_REG_SetSequencerDiscont(ADC_TypeDef *ADCx, uint32_t SeqDiscont)
+{
+ MODIFY_REG(ADCx->CFGR1, ADC_CFGR1_DISCEN, SeqDiscont);
+}
+
+/**
+ * @brief Get ADC group regular sequencer discontinuous mode:
+ * sequence subdivided and scan conversions interrupted every selected
+ * number of ranks.
+ * @rmtoll CFGR1 DISCEN LL_ADC_REG_GetSequencerDiscont\n
+ * @param ADCx ADC instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_ADC_REG_SEQ_DISCONT_DISABLE
+ * @arg @ref LL_ADC_REG_SEQ_DISCONT_1RANK
+ */
+__STATIC_INLINE uint32_t LL_ADC_REG_GetSequencerDiscont(ADC_TypeDef *ADCx)
+{
+ return (uint32_t)(READ_BIT(ADCx->CFGR1, ADC_CFGR1_DISCEN));
+}
+
+/**
+ * @brief Set ADC group regular sequence: channel on rank corresponding to
+ * channel number.
+ * @note This function performs:
+ * - Channels ordering into each rank of scan sequence:
+ * rank of each channel is fixed by channel HW number
+ * (channel 0 fixed on rank 0, channel 1 fixed on rank1, ...).
+ * - Set channels selected by overwriting the current sequencer
+ * configuration.
+ * @note On this STM32 serie, ADC group regular sequencer is
+ * not fully configurable: sequencer length and each rank
+ * affectation to a channel are fixed by channel HW number.
+ * @note Depending on devices and packages, some channels may not be available.
+ * Refer to device datasheet for channels availability.
+ * @note On this STM32 serie, to measure internal channels (VrefInt,
+ * TempSensor, ...), measurement paths to internal channels must be
+ * enabled separately.
+ * This can be done using function @ref LL_ADC_SetCommonPathInternalCh().
+ * @note On this STM32 serie, setting of this feature is conditioned to
+ * ADC state:
+ * ADC must be disabled or enabled without conversion on going
+ * on group regular.
+ * @note One or several values can be selected.
+ * Example: (LL_ADC_CHANNEL_4 | LL_ADC_CHANNEL_12 | ...)
+ * @rmtoll CHSELR CHSEL0 LL_ADC_REG_SetSequencerChannels\n
+ * CHSELR CHSEL1 LL_ADC_REG_SetSequencerChannels\n
+ * CHSELR CHSEL2 LL_ADC_REG_SetSequencerChannels\n
+ * CHSELR CHSEL3 LL_ADC_REG_SetSequencerChannels\n
+ * CHSELR CHSEL4 LL_ADC_REG_SetSequencerChannels\n
+ * CHSELR CHSEL5 LL_ADC_REG_SetSequencerChannels\n
+ * CHSELR CHSEL6 LL_ADC_REG_SetSequencerChannels\n
+ * CHSELR CHSEL7 LL_ADC_REG_SetSequencerChannels\n
+ * CHSELR CHSEL8 LL_ADC_REG_SetSequencerChannels\n
+ * CHSELR CHSEL9 LL_ADC_REG_SetSequencerChannels\n
+ * CHSELR CHSEL10 LL_ADC_REG_SetSequencerChannels\n
+ * CHSELR CHSEL11 LL_ADC_REG_SetSequencerChannels\n
+ * CHSELR CHSEL12 LL_ADC_REG_SetSequencerChannels\n
+ * CHSELR CHSEL13 LL_ADC_REG_SetSequencerChannels\n
+ * CHSELR CHSEL14 LL_ADC_REG_SetSequencerChannels\n
+ * CHSELR CHSEL15 LL_ADC_REG_SetSequencerChannels\n
+ * CHSELR CHSEL16 LL_ADC_REG_SetSequencerChannels\n
+ * CHSELR CHSEL17 LL_ADC_REG_SetSequencerChannels\n
+ * CHSELR CHSEL18 LL_ADC_REG_SetSequencerChannels
+ * @param ADCx ADC instance
+ * @param Channel This parameter can be a combination of the following values:
+ * @arg @ref LL_ADC_CHANNEL_0
+ * @arg @ref LL_ADC_CHANNEL_1
+ * @arg @ref LL_ADC_CHANNEL_2
+ * @arg @ref LL_ADC_CHANNEL_3
+ * @arg @ref LL_ADC_CHANNEL_4
+ * @arg @ref LL_ADC_CHANNEL_5
+ * @arg @ref LL_ADC_CHANNEL_6
+ * @arg @ref LL_ADC_CHANNEL_7
+ * @arg @ref LL_ADC_CHANNEL_8
+ * @arg @ref LL_ADC_CHANNEL_9
+ * @arg @ref LL_ADC_CHANNEL_10
+ * @arg @ref LL_ADC_CHANNEL_11
+ * @arg @ref LL_ADC_CHANNEL_12
+ * @arg @ref LL_ADC_CHANNEL_13
+ * @arg @ref LL_ADC_CHANNEL_14
+ * @arg @ref LL_ADC_CHANNEL_15
+ * @arg @ref LL_ADC_CHANNEL_16
+ * @arg @ref LL_ADC_CHANNEL_17
+ * @arg @ref LL_ADC_CHANNEL_18 (1)
+ * @arg @ref LL_ADC_CHANNEL_VREFINT
+ * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR
+ * @arg @ref LL_ADC_CHANNEL_VBAT (1)
+ *
+ * (1) On STM32F0, parameter not available on all devices: all devices except STM32F030x6, STM32F030x8, STM32F030xC, STM32F070x6, STM32F070xB.
+ * @retval None
+ */
+__STATIC_INLINE void LL_ADC_REG_SetSequencerChannels(ADC_TypeDef *ADCx, uint32_t Channel)
+{
+ /* Parameter "Channel" is used with masks because containing */
+ /* other bits reserved for other purpose. */
+ WRITE_REG(ADCx->CHSELR, (Channel & ADC_CHANNEL_ID_BITFIELD_MASK));
+}
+
+/**
+ * @brief Add channel to ADC group regular sequence: channel on rank corresponding to
+ * channel number.
+ * @note This function performs:
+ * - Channels ordering into each rank of scan sequence:
+ * rank of each channel is fixed by channel HW number
+ * (channel 0 fixed on rank 0, channel 1 fixed on rank1, ...).
+ * - Set channels selected by adding them to the current sequencer
+ * configuration.
+ * @note On this STM32 serie, ADC group regular sequencer is
+ * not fully configurable: sequencer length and each rank
+ * affectation to a channel are fixed by channel HW number.
+ * @note Depending on devices and packages, some channels may not be available.
+ * Refer to device datasheet for channels availability.
+ * @note On this STM32 serie, to measure internal channels (VrefInt,
+ * TempSensor, ...), measurement paths to internal channels must be
+ * enabled separately.
+ * This can be done using function @ref LL_ADC_SetCommonPathInternalCh().
+ * @note On this STM32 serie, setting of this feature is conditioned to
+ * ADC state:
+ * ADC must be disabled or enabled without conversion on going
+ * on group regular.
+ * @note One or several values can be selected.
+ * Example: (LL_ADC_CHANNEL_4 | LL_ADC_CHANNEL_12 | ...)
+ * @rmtoll CHSELR CHSEL0 LL_ADC_REG_SetSequencerChAdd\n
+ * CHSELR CHSEL1 LL_ADC_REG_SetSequencerChAdd\n
+ * CHSELR CHSEL2 LL_ADC_REG_SetSequencerChAdd\n
+ * CHSELR CHSEL3 LL_ADC_REG_SetSequencerChAdd\n
+ * CHSELR CHSEL4 LL_ADC_REG_SetSequencerChAdd\n
+ * CHSELR CHSEL5 LL_ADC_REG_SetSequencerChAdd\n
+ * CHSELR CHSEL6 LL_ADC_REG_SetSequencerChAdd\n
+ * CHSELR CHSEL7 LL_ADC_REG_SetSequencerChAdd\n
+ * CHSELR CHSEL8 LL_ADC_REG_SetSequencerChAdd\n
+ * CHSELR CHSEL9 LL_ADC_REG_SetSequencerChAdd\n
+ * CHSELR CHSEL10 LL_ADC_REG_SetSequencerChAdd\n
+ * CHSELR CHSEL11 LL_ADC_REG_SetSequencerChAdd\n
+ * CHSELR CHSEL12 LL_ADC_REG_SetSequencerChAdd\n
+ * CHSELR CHSEL13 LL_ADC_REG_SetSequencerChAdd\n
+ * CHSELR CHSEL14 LL_ADC_REG_SetSequencerChAdd\n
+ * CHSELR CHSEL15 LL_ADC_REG_SetSequencerChAdd\n
+ * CHSELR CHSEL16 LL_ADC_REG_SetSequencerChAdd\n
+ * CHSELR CHSEL17 LL_ADC_REG_SetSequencerChAdd\n
+ * CHSELR CHSEL18 LL_ADC_REG_SetSequencerChAdd
+ * @param ADCx ADC instance
+ * @param Channel This parameter can be a combination of the following values:
+ * @arg @ref LL_ADC_CHANNEL_0
+ * @arg @ref LL_ADC_CHANNEL_1
+ * @arg @ref LL_ADC_CHANNEL_2
+ * @arg @ref LL_ADC_CHANNEL_3
+ * @arg @ref LL_ADC_CHANNEL_4
+ * @arg @ref LL_ADC_CHANNEL_5
+ * @arg @ref LL_ADC_CHANNEL_6
+ * @arg @ref LL_ADC_CHANNEL_7
+ * @arg @ref LL_ADC_CHANNEL_8
+ * @arg @ref LL_ADC_CHANNEL_9
+ * @arg @ref LL_ADC_CHANNEL_10
+ * @arg @ref LL_ADC_CHANNEL_11
+ * @arg @ref LL_ADC_CHANNEL_12
+ * @arg @ref LL_ADC_CHANNEL_13
+ * @arg @ref LL_ADC_CHANNEL_14
+ * @arg @ref LL_ADC_CHANNEL_15
+ * @arg @ref LL_ADC_CHANNEL_16
+ * @arg @ref LL_ADC_CHANNEL_17
+ * @arg @ref LL_ADC_CHANNEL_18 (1)
+ * @arg @ref LL_ADC_CHANNEL_VREFINT
+ * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR
+ * @arg @ref LL_ADC_CHANNEL_VBAT (1)
+ *
+ * (1) On STM32F0, parameter not available on all devices: all devices except STM32F030x6, STM32F030x8, STM32F030xC, STM32F070x6, STM32F070xB.
+ * @retval None
+ */
+__STATIC_INLINE void LL_ADC_REG_SetSequencerChAdd(ADC_TypeDef *ADCx, uint32_t Channel)
+{
+ /* Parameter "Channel" is used with masks because containing */
+ /* other bits reserved for other purpose. */
+ SET_BIT(ADCx->CHSELR, (Channel & ADC_CHANNEL_ID_BITFIELD_MASK));
+}
+
+/**
+ * @brief Remove channel to ADC group regular sequence: channel on rank corresponding to
+ * channel number.
+ * @note This function performs:
+ * - Channels ordering into each rank of scan sequence:
+ * rank of each channel is fixed by channel HW number
+ * (channel 0 fixed on rank 0, channel 1 fixed on rank1, ...).
+ * - Set channels selected by removing them to the current sequencer
+ * configuration.
+ * @note On this STM32 serie, ADC group regular sequencer is
+ * not fully configurable: sequencer length and each rank
+ * affectation to a channel are fixed by channel HW number.
+ * @note Depending on devices and packages, some channels may not be available.
+ * Refer to device datasheet for channels availability.
+ * @note On this STM32 serie, to measure internal channels (VrefInt,
+ * TempSensor, ...), measurement paths to internal channels must be
+ * enabled separately.
+ * This can be done using function @ref LL_ADC_SetCommonPathInternalCh().
+ * @note On this STM32 serie, setting of this feature is conditioned to
+ * ADC state:
+ * ADC must be disabled or enabled without conversion on going
+ * on group regular.
+ * @note One or several values can be selected.
+ * Example: (LL_ADC_CHANNEL_4 | LL_ADC_CHANNEL_12 | ...)
+ * @rmtoll CHSELR CHSEL0 LL_ADC_REG_SetSequencerChRem\n
+ * CHSELR CHSEL1 LL_ADC_REG_SetSequencerChRem\n
+ * CHSELR CHSEL2 LL_ADC_REG_SetSequencerChRem\n
+ * CHSELR CHSEL3 LL_ADC_REG_SetSequencerChRem\n
+ * CHSELR CHSEL4 LL_ADC_REG_SetSequencerChRem\n
+ * CHSELR CHSEL5 LL_ADC_REG_SetSequencerChRem\n
+ * CHSELR CHSEL6 LL_ADC_REG_SetSequencerChRem\n
+ * CHSELR CHSEL7 LL_ADC_REG_SetSequencerChRem\n
+ * CHSELR CHSEL8 LL_ADC_REG_SetSequencerChRem\n
+ * CHSELR CHSEL9 LL_ADC_REG_SetSequencerChRem\n
+ * CHSELR CHSEL10 LL_ADC_REG_SetSequencerChRem\n
+ * CHSELR CHSEL11 LL_ADC_REG_SetSequencerChRem\n
+ * CHSELR CHSEL12 LL_ADC_REG_SetSequencerChRem\n
+ * CHSELR CHSEL13 LL_ADC_REG_SetSequencerChRem\n
+ * CHSELR CHSEL14 LL_ADC_REG_SetSequencerChRem\n
+ * CHSELR CHSEL15 LL_ADC_REG_SetSequencerChRem\n
+ * CHSELR CHSEL16 LL_ADC_REG_SetSequencerChRem\n
+ * CHSELR CHSEL17 LL_ADC_REG_SetSequencerChRem\n
+ * CHSELR CHSEL18 LL_ADC_REG_SetSequencerChRem
+ * @param ADCx ADC instance
+ * @param Channel This parameter can be a combination of the following values:
+ * @arg @ref LL_ADC_CHANNEL_0
+ * @arg @ref LL_ADC_CHANNEL_1
+ * @arg @ref LL_ADC_CHANNEL_2
+ * @arg @ref LL_ADC_CHANNEL_3
+ * @arg @ref LL_ADC_CHANNEL_4
+ * @arg @ref LL_ADC_CHANNEL_5
+ * @arg @ref LL_ADC_CHANNEL_6
+ * @arg @ref LL_ADC_CHANNEL_7
+ * @arg @ref LL_ADC_CHANNEL_8
+ * @arg @ref LL_ADC_CHANNEL_9
+ * @arg @ref LL_ADC_CHANNEL_10
+ * @arg @ref LL_ADC_CHANNEL_11
+ * @arg @ref LL_ADC_CHANNEL_12
+ * @arg @ref LL_ADC_CHANNEL_13
+ * @arg @ref LL_ADC_CHANNEL_14
+ * @arg @ref LL_ADC_CHANNEL_15
+ * @arg @ref LL_ADC_CHANNEL_16
+ * @arg @ref LL_ADC_CHANNEL_17
+ * @arg @ref LL_ADC_CHANNEL_18 (1)
+ * @arg @ref LL_ADC_CHANNEL_VREFINT
+ * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR
+ * @arg @ref LL_ADC_CHANNEL_VBAT (1)
+ *
+ * (1) On STM32F0, parameter not available on all devices: all devices except STM32F030x6, STM32F030x8, STM32F030xC, STM32F070x6, STM32F070xB.
+ * @retval None
+ */
+__STATIC_INLINE void LL_ADC_REG_SetSequencerChRem(ADC_TypeDef *ADCx, uint32_t Channel)
+{
+ /* Parameter "Channel" is used with masks because containing */
+ /* other bits reserved for other purpose. */
+ CLEAR_BIT(ADCx->CHSELR, (Channel & ADC_CHANNEL_ID_BITFIELD_MASK));
+}
+
+/**
+ * @brief Get ADC group regular sequence: channel on rank corresponding to
+ * channel number.
+ * @note This function performs:
+ * - Channels order reading into each rank of scan sequence:
+ * rank of each channel is fixed by channel HW number
+ * (channel 0 fixed on rank 0, channel 1 fixed on rank1, ...).
+ * @note On this STM32 serie, ADC group regular sequencer is
+ * not fully configurable: sequencer length and each rank
+ * affectation to a channel are fixed by channel HW number.
+ * @note Depending on devices and packages, some channels may not be available.
+ * Refer to device datasheet for channels availability.
+ * @note On this STM32 serie, to measure internal channels (VrefInt,
+ * TempSensor, ...), measurement paths to internal channels must be
+ * enabled separately.
+ * This can be done using function @ref LL_ADC_SetCommonPathInternalCh().
+ * @note On this STM32 serie, setting of this feature is conditioned to
+ * ADC state:
+ * ADC must be disabled or enabled without conversion on going
+ * on group regular.
+ * @note One or several values can be retrieved.
+ * Example: (LL_ADC_CHANNEL_4 | LL_ADC_CHANNEL_12 | ...)
+ * @rmtoll CHSELR CHSEL0 LL_ADC_REG_GetSequencerChannels\n
+ * CHSELR CHSEL1 LL_ADC_REG_GetSequencerChannels\n
+ * CHSELR CHSEL2 LL_ADC_REG_GetSequencerChannels\n
+ * CHSELR CHSEL3 LL_ADC_REG_GetSequencerChannels\n
+ * CHSELR CHSEL4 LL_ADC_REG_GetSequencerChannels\n
+ * CHSELR CHSEL5 LL_ADC_REG_GetSequencerChannels\n
+ * CHSELR CHSEL6 LL_ADC_REG_GetSequencerChannels\n
+ * CHSELR CHSEL7 LL_ADC_REG_GetSequencerChannels\n
+ * CHSELR CHSEL8 LL_ADC_REG_GetSequencerChannels\n
+ * CHSELR CHSEL9 LL_ADC_REG_GetSequencerChannels\n
+ * CHSELR CHSEL10 LL_ADC_REG_GetSequencerChannels\n
+ * CHSELR CHSEL11 LL_ADC_REG_GetSequencerChannels\n
+ * CHSELR CHSEL12 LL_ADC_REG_GetSequencerChannels\n
+ * CHSELR CHSEL13 LL_ADC_REG_GetSequencerChannels\n
+ * CHSELR CHSEL14 LL_ADC_REG_GetSequencerChannels\n
+ * CHSELR CHSEL15 LL_ADC_REG_GetSequencerChannels\n
+ * CHSELR CHSEL16 LL_ADC_REG_GetSequencerChannels\n
+ * CHSELR CHSEL17 LL_ADC_REG_GetSequencerChannels\n
+ * CHSELR CHSEL18 LL_ADC_REG_GetSequencerChannels
+ * @param ADCx ADC instance
+ * @retval Returned value can be a combination of the following values:
+ * @arg @ref LL_ADC_CHANNEL_0
+ * @arg @ref LL_ADC_CHANNEL_1
+ * @arg @ref LL_ADC_CHANNEL_2
+ * @arg @ref LL_ADC_CHANNEL_3
+ * @arg @ref LL_ADC_CHANNEL_4
+ * @arg @ref LL_ADC_CHANNEL_5
+ * @arg @ref LL_ADC_CHANNEL_6
+ * @arg @ref LL_ADC_CHANNEL_7
+ * @arg @ref LL_ADC_CHANNEL_8
+ * @arg @ref LL_ADC_CHANNEL_9
+ * @arg @ref LL_ADC_CHANNEL_10
+ * @arg @ref LL_ADC_CHANNEL_11
+ * @arg @ref LL_ADC_CHANNEL_12
+ * @arg @ref LL_ADC_CHANNEL_13
+ * @arg @ref LL_ADC_CHANNEL_14
+ * @arg @ref LL_ADC_CHANNEL_15
+ * @arg @ref LL_ADC_CHANNEL_16
+ * @arg @ref LL_ADC_CHANNEL_17
+ * @arg @ref LL_ADC_CHANNEL_18 (1)
+ * @arg @ref LL_ADC_CHANNEL_VREFINT
+ * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR
+ * @arg @ref LL_ADC_CHANNEL_VBAT (1)
+ *
+ * (1) On STM32F0, parameter not available on all devices: all devices except STM32F030x6, STM32F030x8, STM32F030xC, STM32F070x6, STM32F070xB.
+ */
+__STATIC_INLINE uint32_t LL_ADC_REG_GetSequencerChannels(ADC_TypeDef *ADCx)
+{
+ register uint32_t ChannelsBitfield = READ_BIT(ADCx->CHSELR, ADC_CHSELR_CHSEL);
+
+ return ( (((ChannelsBitfield & ADC_CHSELR_CHSEL0) >> ADC_CHSELR_CHSEL0_BITOFFSET_POS) * LL_ADC_CHANNEL_0)
+ | (((ChannelsBitfield & ADC_CHSELR_CHSEL1) >> ADC_CHSELR_CHSEL1_BITOFFSET_POS) * LL_ADC_CHANNEL_1)
+ | (((ChannelsBitfield & ADC_CHSELR_CHSEL2) >> ADC_CHSELR_CHSEL2_BITOFFSET_POS) * LL_ADC_CHANNEL_2)
+ | (((ChannelsBitfield & ADC_CHSELR_CHSEL3) >> ADC_CHSELR_CHSEL3_BITOFFSET_POS) * LL_ADC_CHANNEL_3)
+ | (((ChannelsBitfield & ADC_CHSELR_CHSEL4) >> ADC_CHSELR_CHSEL4_BITOFFSET_POS) * LL_ADC_CHANNEL_4)
+ | (((ChannelsBitfield & ADC_CHSELR_CHSEL5) >> ADC_CHSELR_CHSEL5_BITOFFSET_POS) * LL_ADC_CHANNEL_5)
+ | (((ChannelsBitfield & ADC_CHSELR_CHSEL6) >> ADC_CHSELR_CHSEL6_BITOFFSET_POS) * LL_ADC_CHANNEL_6)
+ | (((ChannelsBitfield & ADC_CHSELR_CHSEL7) >> ADC_CHSELR_CHSEL7_BITOFFSET_POS) * LL_ADC_CHANNEL_7)
+ | (((ChannelsBitfield & ADC_CHSELR_CHSEL8) >> ADC_CHSELR_CHSEL8_BITOFFSET_POS) * LL_ADC_CHANNEL_8)
+ | (((ChannelsBitfield & ADC_CHSELR_CHSEL9) >> ADC_CHSELR_CHSEL9_BITOFFSET_POS) * LL_ADC_CHANNEL_9)
+ | (((ChannelsBitfield & ADC_CHSELR_CHSEL10) >> ADC_CHSELR_CHSEL10_BITOFFSET_POS) * LL_ADC_CHANNEL_10)
+ | (((ChannelsBitfield & ADC_CHSELR_CHSEL11) >> ADC_CHSELR_CHSEL11_BITOFFSET_POS) * LL_ADC_CHANNEL_11)
+ | (((ChannelsBitfield & ADC_CHSELR_CHSEL12) >> ADC_CHSELR_CHSEL12_BITOFFSET_POS) * LL_ADC_CHANNEL_12)
+ | (((ChannelsBitfield & ADC_CHSELR_CHSEL13) >> ADC_CHSELR_CHSEL13_BITOFFSET_POS) * LL_ADC_CHANNEL_13)
+ | (((ChannelsBitfield & ADC_CHSELR_CHSEL14) >> ADC_CHSELR_CHSEL14_BITOFFSET_POS) * LL_ADC_CHANNEL_14)
+ | (((ChannelsBitfield & ADC_CHSELR_CHSEL15) >> ADC_CHSELR_CHSEL15_BITOFFSET_POS) * LL_ADC_CHANNEL_15)
+ | (((ChannelsBitfield & ADC_CHSELR_CHSEL16) >> ADC_CHSELR_CHSEL16_BITOFFSET_POS) * LL_ADC_CHANNEL_16)
+ | (((ChannelsBitfield & ADC_CHSELR_CHSEL17) >> ADC_CHSELR_CHSEL17_BITOFFSET_POS) * LL_ADC_CHANNEL_17)
+#if defined(ADC_CCR_VBATEN)
+ | (((ChannelsBitfield & ADC_CHSELR_CHSEL18) >> ADC_CHSELR_CHSEL18_BITOFFSET_POS) * LL_ADC_CHANNEL_18)
+#endif
+ );
+}
+/**
+ * @brief Set ADC continuous conversion mode on ADC group regular.
+ * @note Description of ADC continuous conversion mode:
+ * - single mode: one conversion per trigger
+ * - continuous mode: after the first trigger, following
+ * conversions launched successively automatically.
+ * @note It is not possible to enable both ADC group regular
+ * continuous mode and sequencer discontinuous mode.
+ * @note On this STM32 serie, setting of this feature is conditioned to
+ * ADC state:
+ * ADC must be disabled or enabled without conversion on going
+ * on group regular.
+ * @rmtoll CFGR1 CONT LL_ADC_REG_SetContinuousMode
+ * @param ADCx ADC instance
+ * @param Continuous This parameter can be one of the following values:
+ * @arg @ref LL_ADC_REG_CONV_SINGLE
+ * @arg @ref LL_ADC_REG_CONV_CONTINUOUS
+ * @retval None
+ */
+__STATIC_INLINE void LL_ADC_REG_SetContinuousMode(ADC_TypeDef *ADCx, uint32_t Continuous)
+{
+ MODIFY_REG(ADCx->CFGR1, ADC_CFGR1_CONT, Continuous);
+}
+
+/**
+ * @brief Get ADC continuous conversion mode on ADC group regular.
+ * @note Description of ADC continuous conversion mode:
+ * - single mode: one conversion per trigger
+ * - continuous mode: after the first trigger, following
+ * conversions launched successively automatically.
+ * @rmtoll CFGR1 CONT LL_ADC_REG_GetContinuousMode
+ * @param ADCx ADC instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_ADC_REG_CONV_SINGLE
+ * @arg @ref LL_ADC_REG_CONV_CONTINUOUS
+ */
+__STATIC_INLINE uint32_t LL_ADC_REG_GetContinuousMode(ADC_TypeDef *ADCx)
+{
+ return (uint32_t)(READ_BIT(ADCx->CFGR1, ADC_CFGR1_CONT));
+}
+
+/**
+ * @brief Set ADC group regular conversion data transfer: no transfer or
+ * transfer by DMA, and DMA requests mode.
+ * @note If transfer by DMA selected, specifies the DMA requests
+ * mode:
+ * - Limited mode (One shot mode): DMA transfer requests are stopped
+ * when number of DMA data transfers (number of
+ * ADC conversions) is reached.
+ * This ADC mode is intended to be used with DMA mode non-circular.
+ * - Unlimited mode: DMA transfer requests are unlimited,
+ * whatever number of DMA data transfers (number of
+ * ADC conversions).
+ * This ADC mode is intended to be used with DMA mode circular.
+ * @note If ADC DMA requests mode is set to unlimited and DMA is set to
+ * mode non-circular:
+ * when DMA transfers size will be reached, DMA will stop transfers of
+ * ADC conversions data ADC will raise an overrun error
+ * (overrun flag and interruption if enabled).
+ * @note To configure DMA source address (peripheral address),
+ * use function @ref LL_ADC_DMA_GetRegAddr().
+ * @note On this STM32 serie, setting of this feature is conditioned to
+ * ADC state:
+ * ADC must be disabled or enabled without conversion on going
+ * on group regular.
+ * @rmtoll CFGR1 DMAEN LL_ADC_REG_SetDMATransfer\n
+ * CFGR1 DMACFG LL_ADC_REG_SetDMATransfer
+ * @param ADCx ADC instance
+ * @param DMATransfer This parameter can be one of the following values:
+ * @arg @ref LL_ADC_REG_DMA_TRANSFER_NONE
+ * @arg @ref LL_ADC_REG_DMA_TRANSFER_LIMITED
+ * @arg @ref LL_ADC_REG_DMA_TRANSFER_UNLIMITED
+ * @retval None
+ */
+__STATIC_INLINE void LL_ADC_REG_SetDMATransfer(ADC_TypeDef *ADCx, uint32_t DMATransfer)
+{
+ MODIFY_REG(ADCx->CFGR1, ADC_CFGR1_DMAEN | ADC_CFGR1_DMACFG, DMATransfer);
+}
+
+/**
+ * @brief Get ADC group regular conversion data transfer: no transfer or
+ * transfer by DMA, and DMA requests mode.
+ * @note If transfer by DMA selected, specifies the DMA requests
+ * mode:
+ * - Limited mode (One shot mode): DMA transfer requests are stopped
+ * when number of DMA data transfers (number of
+ * ADC conversions) is reached.
+ * This ADC mode is intended to be used with DMA mode non-circular.
+ * - Unlimited mode: DMA transfer requests are unlimited,
+ * whatever number of DMA data transfers (number of
+ * ADC conversions).
+ * This ADC mode is intended to be used with DMA mode circular.
+ * @note If ADC DMA requests mode is set to unlimited and DMA is set to
+ * mode non-circular:
+ * when DMA transfers size will be reached, DMA will stop transfers of
+ * ADC conversions data ADC will raise an overrun error
+ * (overrun flag and interruption if enabled).
+ * @note To configure DMA source address (peripheral address),
+ * use function @ref LL_ADC_DMA_GetRegAddr().
+ * @rmtoll CFGR1 DMAEN LL_ADC_REG_GetDMATransfer\n
+ * CFGR1 DMACFG LL_ADC_REG_GetDMATransfer
+ * @param ADCx ADC instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_ADC_REG_DMA_TRANSFER_NONE
+ * @arg @ref LL_ADC_REG_DMA_TRANSFER_LIMITED
+ * @arg @ref LL_ADC_REG_DMA_TRANSFER_UNLIMITED
+ */
+__STATIC_INLINE uint32_t LL_ADC_REG_GetDMATransfer(ADC_TypeDef *ADCx)
+{
+ return (uint32_t)(READ_BIT(ADCx->CFGR1, ADC_CFGR1_DMAEN | ADC_CFGR1_DMACFG));
+}
+
+/**
+ * @brief Set ADC group regular behavior in case of overrun:
+ * data preserved or overwritten.
+ * @note Compatibility with devices without feature overrun:
+ * other devices without this feature have a behavior
+ * equivalent to data overwritten.
+ * The default setting of overrun is data preserved.
+ * Therefore, for compatibility with all devices, parameter
+ * overrun should be set to data overwritten.
+ * @note On this STM32 serie, setting of this feature is conditioned to
+ * ADC state:
+ * ADC must be disabled or enabled without conversion on going
+ * on group regular.
+ * @rmtoll CFGR1 OVRMOD LL_ADC_REG_SetOverrun
+ * @param ADCx ADC instance
+ * @param Overrun This parameter can be one of the following values:
+ * @arg @ref LL_ADC_REG_OVR_DATA_PRESERVED
+ * @arg @ref LL_ADC_REG_OVR_DATA_OVERWRITTEN
+ * @retval None
+ */
+__STATIC_INLINE void LL_ADC_REG_SetOverrun(ADC_TypeDef *ADCx, uint32_t Overrun)
+{
+ MODIFY_REG(ADCx->CFGR1, ADC_CFGR1_OVRMOD, Overrun);
+}
+
+/**
+ * @brief Get ADC group regular behavior in case of overrun:
+ * data preserved or overwritten.
+ * @rmtoll CFGR1 OVRMOD LL_ADC_REG_GetOverrun
+ * @param ADCx ADC instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_ADC_REG_OVR_DATA_PRESERVED
+ * @arg @ref LL_ADC_REG_OVR_DATA_OVERWRITTEN
+ */
+__STATIC_INLINE uint32_t LL_ADC_REG_GetOverrun(ADC_TypeDef *ADCx)
+{
+ return (uint32_t)(READ_BIT(ADCx->CFGR1, ADC_CFGR1_OVRMOD));
+}
+
+/**
+ * @}
+ */
+
+
+/** @defgroup ADC_LL_EF_Configuration_ADC_AnalogWatchdog Configuration of ADC transversal scope: analog watchdog
+ * @{
+ */
+
+/**
+ * @brief Set ADC analog watchdog monitored channels:
+ * a single channel or all channels,
+ * on ADC group regular.
+ * @note Once monitored channels are selected, analog watchdog
+ * is enabled.
+ * @note In case of need to define a single channel to monitor
+ * with analog watchdog from sequencer channel definition,
+ * use helper macro @ref __LL_ADC_ANALOGWD_CHANNEL_GROUP().
+ * @note On this STM32 serie, there is only 1 kind of analog watchdog
+ * instance:
+ * - AWD standard (instance AWD1):
+ * - channels monitored: can monitor 1 channel or all channels.
+ * - groups monitored: ADC group regular.
+ * - resolution: resolution is not limited (corresponds to
+ * ADC resolution configured).
+ * @note On this STM32 serie, setting of this feature is conditioned to
+ * ADC state:
+ * ADC must be disabled or enabled without conversion on going
+ * on group regular.
+ * @rmtoll CFGR1 AWDCH LL_ADC_SetAnalogWDMonitChannels\n
+ * CFGR1 AWDSGL LL_ADC_SetAnalogWDMonitChannels\n
+ * CFGR1 AWDEN LL_ADC_SetAnalogWDMonitChannels
+ * @param ADCx ADC instance
+ * @param AWDChannelGroup This parameter can be one of the following values:
+ * @arg @ref LL_ADC_AWD_DISABLE
+ * @arg @ref LL_ADC_AWD_ALL_CHANNELS_REG
+ * @arg @ref LL_ADC_AWD_CHANNEL_0_REG
+ * @arg @ref LL_ADC_AWD_CHANNEL_1_REG
+ * @arg @ref LL_ADC_AWD_CHANNEL_2_REG
+ * @arg @ref LL_ADC_AWD_CHANNEL_3_REG
+ * @arg @ref LL_ADC_AWD_CHANNEL_4_REG
+ * @arg @ref LL_ADC_AWD_CHANNEL_5_REG
+ * @arg @ref LL_ADC_AWD_CHANNEL_6_REG
+ * @arg @ref LL_ADC_AWD_CHANNEL_7_REG
+ * @arg @ref LL_ADC_AWD_CHANNEL_8_REG
+ * @arg @ref LL_ADC_AWD_CHANNEL_9_REG
+ * @arg @ref LL_ADC_AWD_CHANNEL_10_REG
+ * @arg @ref LL_ADC_AWD_CHANNEL_11_REG
+ * @arg @ref LL_ADC_AWD_CHANNEL_12_REG
+ * @arg @ref LL_ADC_AWD_CHANNEL_13_REG
+ * @arg @ref LL_ADC_AWD_CHANNEL_14_REG
+ * @arg @ref LL_ADC_AWD_CHANNEL_15_REG
+ * @arg @ref LL_ADC_AWD_CHANNEL_16_REG
+ * @arg @ref LL_ADC_AWD_CHANNEL_17_REG
+ * @arg @ref LL_ADC_AWD_CHANNEL_18_REG (1)
+ * @arg @ref LL_ADC_AWD_CH_VREFINT_REG
+ * @arg @ref LL_ADC_AWD_CH_TEMPSENSOR_REG
+ * @arg @ref LL_ADC_AWD_CH_VBAT_REG (1)
+ *
+ * (1) On STM32F0, parameter not available on all devices: all devices except STM32F030x6, STM32F030x8, STM32F030xC, STM32F070x6, STM32F070xB.
+ * @retval None
+ */
+__STATIC_INLINE void LL_ADC_SetAnalogWDMonitChannels(ADC_TypeDef *ADCx, uint32_t AWDChannelGroup)
+{
+ MODIFY_REG(ADCx->CFGR1,
+ (ADC_CFGR1_AWDCH | ADC_CFGR1_AWDSGL | ADC_CFGR1_AWDEN),
+ (AWDChannelGroup & ADC_AWD_CR_ALL_CHANNEL_MASK));
+}
+
+/**
+ * @brief Get ADC analog watchdog monitored channel.
+ * @note Usage of the returned channel number:
+ * - To reinject this channel into another function LL_ADC_xxx:
+ * the returned channel number is only partly formatted on definition
+ * of literals LL_ADC_CHANNEL_x. Therefore, it has to be compared
+ * with parts of literals LL_ADC_CHANNEL_x or using
+ * helper macro @ref __LL_ADC_CHANNEL_TO_DECIMAL_NB().
+ * Then the selected literal LL_ADC_CHANNEL_x can be used
+ * as parameter for another function.
+ * - To get the channel number in decimal format:
+ * process the returned value with the helper macro
+ * @ref __LL_ADC_CHANNEL_TO_DECIMAL_NB().
+ * Applicable only when the analog watchdog is set to monitor
+ * one channel.
+ * @note On this STM32 serie, there is only 1 kind of analog watchdog
+ * instance:
+ * - AWD standard (instance AWD1):
+ * - channels monitored: can monitor 1 channel or all channels.
+ * - groups monitored: ADC group regular.
+ * - resolution: resolution is not limited (corresponds to
+ * ADC resolution configured).
+ * @note On this STM32 serie, setting of this feature is conditioned to
+ * ADC state:
+ * ADC must be disabled or enabled without conversion on going
+ * on group regular.
+ * @rmtoll CFGR1 AWDCH LL_ADC_GetAnalogWDMonitChannels\n
+ * CFGR1 AWDSGL LL_ADC_GetAnalogWDMonitChannels\n
+ * CFGR1 AWDEN LL_ADC_GetAnalogWDMonitChannels
+ * @param ADCx ADC instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_ADC_AWD_DISABLE
+ * @arg @ref LL_ADC_AWD_ALL_CHANNELS_REG
+ * @arg @ref LL_ADC_AWD_CHANNEL_0_REG
+ * @arg @ref LL_ADC_AWD_CHANNEL_1_REG
+ * @arg @ref LL_ADC_AWD_CHANNEL_2_REG
+ * @arg @ref LL_ADC_AWD_CHANNEL_3_REG
+ * @arg @ref LL_ADC_AWD_CHANNEL_4_REG
+ * @arg @ref LL_ADC_AWD_CHANNEL_5_REG
+ * @arg @ref LL_ADC_AWD_CHANNEL_6_REG
+ * @arg @ref LL_ADC_AWD_CHANNEL_7_REG
+ * @arg @ref LL_ADC_AWD_CHANNEL_8_REG
+ * @arg @ref LL_ADC_AWD_CHANNEL_9_REG
+ * @arg @ref LL_ADC_AWD_CHANNEL_10_REG
+ * @arg @ref LL_ADC_AWD_CHANNEL_11_REG
+ * @arg @ref LL_ADC_AWD_CHANNEL_12_REG
+ * @arg @ref LL_ADC_AWD_CHANNEL_13_REG
+ * @arg @ref LL_ADC_AWD_CHANNEL_14_REG
+ * @arg @ref LL_ADC_AWD_CHANNEL_15_REG
+ * @arg @ref LL_ADC_AWD_CHANNEL_16_REG
+ * @arg @ref LL_ADC_AWD_CHANNEL_17_REG
+ * @arg @ref LL_ADC_AWD_CHANNEL_18_REG
+ */
+__STATIC_INLINE uint32_t LL_ADC_GetAnalogWDMonitChannels(ADC_TypeDef *ADCx)
+{
+ register uint32_t AWDChannelGroup = READ_BIT(ADCx->CFGR1, (ADC_CFGR1_AWDCH | ADC_CFGR1_AWDSGL | ADC_CFGR1_AWDEN));
+
+ /* Note: Set variable according to channel definition including channel ID */
+ /* with bitfield. */
+ register uint32_t AWDChannelSingle = ((AWDChannelGroup & ADC_CFGR1_AWDSGL) >> ADC_CFGR1_AWDSGL_BITOFFSET_POS);
+ register uint32_t AWDChannelBitField = (ADC_CHANNEL_0_BITFIELD << ((AWDChannelGroup & ADC_CHANNEL_ID_NUMBER_MASK) >> ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS));
+
+ return (AWDChannelGroup | (AWDChannelBitField * AWDChannelSingle));
+}
+
+/**
+ * @brief Set ADC analog watchdog thresholds value of both thresholds
+ * high and low.
+ * @note If value of only one threshold high or low must be set,
+ * use function @ref LL_ADC_SetAnalogWDThresholds().
+ * @note In case of ADC resolution different of 12 bits,
+ * analog watchdog thresholds data require a specific shift.
+ * Use helper macro @ref __LL_ADC_ANALOGWD_SET_THRESHOLD_RESOLUTION().
+ * @note On this STM32 serie, there is only 1 kind of analog watchdog
+ * instance:
+ * - AWD standard (instance AWD1):
+ * - channels monitored: can monitor 1 channel or all channels.
+ * - groups monitored: ADC group regular.
+ * - resolution: resolution is not limited (corresponds to
+ * ADC resolution configured).
+ * @note On this STM32 serie, setting of this feature is conditioned to
+ * ADC state:
+ * ADC must be disabled or enabled without conversion on going
+ * on group regular.
+ * @rmtoll TR HT LL_ADC_ConfigAnalogWDThresholds\n
+ * TR LT LL_ADC_ConfigAnalogWDThresholds
+ * @param ADCx ADC instance
+ * @param AWDThresholdHighValue Value between Min_Data=0x000 and Max_Data=0xFFF
+ * @param AWDThresholdLowValue Value between Min_Data=0x000 and Max_Data=0xFFF
+ * @retval None
+ */
+__STATIC_INLINE void LL_ADC_ConfigAnalogWDThresholds(ADC_TypeDef *ADCx, uint32_t AWDThresholdHighValue, uint32_t AWDThresholdLowValue)
+{
+ MODIFY_REG(ADCx->TR,
+ ADC_TR_HT | ADC_TR_LT,
+ (AWDThresholdHighValue << ADC_TR_HT_BITOFFSET_POS) | AWDThresholdLowValue);
+}
+
+/**
+ * @brief Set ADC analog watchdog threshold value of threshold
+ * high or low.
+ * @note If values of both thresholds high or low must be set,
+ * use function @ref LL_ADC_ConfigAnalogWDThresholds().
+ * @note In case of ADC resolution different of 12 bits,
+ * analog watchdog thresholds data require a specific shift.
+ * Use helper macro @ref __LL_ADC_ANALOGWD_SET_THRESHOLD_RESOLUTION().
+ * @note On this STM32 serie, there is only 1 kind of analog watchdog
+ * instance:
+ * - AWD standard (instance AWD1):
+ * - channels monitored: can monitor 1 channel or all channels.
+ * - groups monitored: ADC group regular.
+ * - resolution: resolution is not limited (corresponds to
+ * ADC resolution configured).
+ * @note On this STM32 serie, setting of this feature is conditioned to
+ * ADC state:
+ * ADC must be disabled or enabled without conversion on going
+ * on group regular.
+ * @rmtoll TR HT LL_ADC_SetAnalogWDThresholds\n
+ * TR LT LL_ADC_SetAnalogWDThresholds
+ * @param ADCx ADC instance
+ * @param AWDThresholdsHighLow This parameter can be one of the following values:
+ * @arg @ref LL_ADC_AWD_THRESHOLD_HIGH
+ * @arg @ref LL_ADC_AWD_THRESHOLD_LOW
+ * @param AWDThresholdValue Value between Min_Data=0x000 and Max_Data=0xFFF
+ * @retval None
+ */
+__STATIC_INLINE void LL_ADC_SetAnalogWDThresholds(ADC_TypeDef *ADCx, uint32_t AWDThresholdsHighLow, uint32_t AWDThresholdValue)
+{
+ /* Parameter "AWDThresholdsHighLow" is used with mask "0x00000010" */
+ /* to be equivalent to "POSITION_VAL(AWDThresholdsHighLow)": if threshold */
+ /* high is selected, then data is shifted to LSB. Else(threshold low), */
+ /* data is not shifted. */
+ MODIFY_REG(ADCx->TR,
+ AWDThresholdsHighLow,
+ AWDThresholdValue << ((AWDThresholdsHighLow >> ADC_TR_HT_BITOFFSET_POS) & 0x00000010U));
+}
+
+/**
+ * @brief Get ADC analog watchdog threshold value of threshold high,
+ * threshold low or raw data with ADC thresholds high and low
+ * concatenated.
+ * @note If raw data with ADC thresholds high and low is retrieved,
+ * the data of each threshold high or low can be isolated
+ * using helper macro:
+ * @ref __LL_ADC_ANALOGWD_THRESHOLDS_HIGH_LOW().
+ * @note In case of ADC resolution different of 12 bits,
+ * analog watchdog thresholds data require a specific shift.
+ * Use helper macro @ref __LL_ADC_ANALOGWD_GET_THRESHOLD_RESOLUTION().
+ * @rmtoll TR1 HT1 LL_ADC_GetAnalogWDThresholds\n
+ * TR2 HT2 LL_ADC_GetAnalogWDThresholds\n
+ * TR3 HT3 LL_ADC_GetAnalogWDThresholds\n
+ * TR1 LT1 LL_ADC_GetAnalogWDThresholds\n
+ * TR2 LT2 LL_ADC_GetAnalogWDThresholds\n
+ * TR3 LT3 LL_ADC_GetAnalogWDThresholds
+ * @param ADCx ADC instance
+ * @param AWDThresholdsHighLow This parameter can be one of the following values:
+ * @arg @ref LL_ADC_AWD_THRESHOLD_HIGH
+ * @arg @ref LL_ADC_AWD_THRESHOLD_LOW
+ * @arg @ref LL_ADC_AWD_THRESHOLDS_HIGH_LOW
+ * @retval Value between Min_Data=0x000 and Max_Data=0xFFF
+*/
+__STATIC_INLINE uint32_t LL_ADC_GetAnalogWDThresholds(ADC_TypeDef *ADCx, uint32_t AWDThresholdsHighLow)
+{
+ /* Parameter "AWDThresholdsHighLow" is used with mask "0x00000010" */
+ /* to be equivalent to "POSITION_VAL(AWDThresholdsHighLow)": if threshold */
+ /* high is selected, then data is shifted to LSB. Else(threshold low or */
+ /* both thresholds), data is not shifted. */
+ return (uint32_t)(READ_BIT(ADCx->TR,
+ (AWDThresholdsHighLow | ADC_TR_LT))
+ >> ((~AWDThresholdsHighLow) & 0x00000010U)
+ );
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup ADC_LL_EF_Operation_ADC_Instance Operation on ADC hierarchical scope: ADC instance
+ * @{
+ */
+
+/**
+ * @brief Enable the selected ADC instance.
+ * @note On this STM32 serie, after ADC enable, a delay for
+ * ADC internal analog stabilization is required before performing a
+ * ADC conversion start.
+ * Refer to device datasheet, parameter tSTAB.
+ * @note On this STM32 serie, flag LL_ADC_FLAG_ADRDY is raised when the ADC
+ * is enabled and when conversion clock is active.
+ * (not only core clock: this ADC has a dual clock domain)
+ * @note On this STM32 serie, setting of this feature is conditioned to
+ * ADC state:
+ * ADC must be ADC disabled and ADC internal voltage regulator enabled.
+ * @rmtoll CR ADEN LL_ADC_Enable
+ * @param ADCx ADC instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_ADC_Enable(ADC_TypeDef *ADCx)
+{
+ /* Note: Write register with some additional bits forced to state reset */
+ /* instead of modifying only the selected bit for this function, */
+ /* to not interfere with bits with HW property "rs". */
+ MODIFY_REG(ADCx->CR,
+ ADC_CR_BITS_PROPERTY_RS,
+ ADC_CR_ADEN);
+}
+
+/**
+ * @brief Disable the selected ADC instance.
+ * @note On this STM32 serie, setting of this feature is conditioned to
+ * ADC state:
+ * ADC must be not disabled. Must be enabled without conversion on going
+ * on group regular.
+ * @rmtoll CR ADDIS LL_ADC_Disable
+ * @param ADCx ADC instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_ADC_Disable(ADC_TypeDef *ADCx)
+{
+ /* Note: Write register with some additional bits forced to state reset */
+ /* instead of modifying only the selected bit for this function, */
+ /* to not interfere with bits with HW property "rs". */
+ MODIFY_REG(ADCx->CR,
+ ADC_CR_BITS_PROPERTY_RS,
+ ADC_CR_ADDIS);
+}
+
+/**
+ * @brief Get the selected ADC instance enable state.
+ * @note On this STM32 serie, flag LL_ADC_FLAG_ADRDY is raised when the ADC
+ * is enabled and when conversion clock is active.
+ * (not only core clock: this ADC has a dual clock domain)
+ * @rmtoll CR ADEN LL_ADC_IsEnabled
+ * @param ADCx ADC instance
+ * @retval 0: ADC is disabled, 1: ADC is enabled.
+ */
+__STATIC_INLINE uint32_t LL_ADC_IsEnabled(ADC_TypeDef *ADCx)
+{
+ return (READ_BIT(ADCx->CR, ADC_CR_ADEN) == (ADC_CR_ADEN));
+}
+
+/**
+ * @brief Get the selected ADC instance disable state.
+ * @rmtoll CR ADDIS LL_ADC_IsDisableOngoing
+ * @param ADCx ADC instance
+ * @retval 0: no ADC disable command on going.
+ */
+__STATIC_INLINE uint32_t LL_ADC_IsDisableOngoing(ADC_TypeDef *ADCx)
+{
+ return (READ_BIT(ADCx->CR, ADC_CR_ADDIS) == (ADC_CR_ADDIS));
+}
+
+/**
+ * @brief Start ADC calibration in the mode single-ended
+ * or differential (for devices with differential mode available).
+ * @note On this STM32 serie, a minimum number of ADC clock cycles
+ * are required between ADC end of calibration and ADC enable.
+ * Refer to literal @ref LL_ADC_DELAY_CALIB_ENABLE_ADC_CYCLES.
+ * @note In case of usage of ADC with DMA transfer:
+ * On this STM32 serie, ADC DMA transfer request should be disabled
+ * during calibration:
+ * Calibration factor is available in data register
+ * and also transfered by DMA.
+ * To not insert ADC calibration factor among ADC conversion data
+ * in array variable, DMA transfer must be disabled during
+ * calibration.
+ * (DMA transfer setting backup and disable before calibration,
+ * DMA transfer setting restore after calibration.
+ * Refer to functions @ref LL_ADC_REG_GetDMATransfer(),
+ * @ref LL_ADC_REG_SetDMATransfer() ).
+ * @note On this STM32 serie, setting of this feature is conditioned to
+ * ADC state:
+ * ADC must be ADC disabled.
+ * @rmtoll CR ADCAL LL_ADC_StartCalibration
+ * @param ADCx ADC instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_ADC_StartCalibration(ADC_TypeDef *ADCx)
+{
+ /* Note: Write register with some additional bits forced to state reset */
+ /* instead of modifying only the selected bit for this function, */
+ /* to not interfere with bits with HW property "rs". */
+ MODIFY_REG(ADCx->CR,
+ ADC_CR_BITS_PROPERTY_RS,
+ ADC_CR_ADCAL);
+}
+
+/**
+ * @brief Get ADC calibration state.
+ * @rmtoll CR ADCAL LL_ADC_IsCalibrationOnGoing
+ * @param ADCx ADC instance
+ * @retval 0: calibration complete, 1: calibration in progress.
+ */
+__STATIC_INLINE uint32_t LL_ADC_IsCalibrationOnGoing(ADC_TypeDef *ADCx)
+{
+ return (READ_BIT(ADCx->CR, ADC_CR_ADCAL) == (ADC_CR_ADCAL));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup ADC_LL_EF_Operation_ADC_Group_Regular Operation on ADC hierarchical scope: group regular
+ * @{
+ */
+
+/**
+ * @brief Start ADC group regular conversion.
+ * @note On this STM32 serie, this function is relevant for both
+ * internal trigger (SW start) and external trigger:
+ * - If ADC trigger has been set to software start, ADC conversion
+ * starts immediately.
+ * - If ADC trigger has been set to external trigger, ADC conversion
+ * will start at next trigger event (on the selected trigger edge)
+ * following the ADC start conversion command.
+ * @note On this STM32 serie, setting of this feature is conditioned to
+ * ADC state:
+ * ADC must be enabled without conversion on going on group regular,
+ * without conversion stop command on going on group regular,
+ * without ADC disable command on going.
+ * @rmtoll CR ADSTART LL_ADC_REG_StartConversion
+ * @param ADCx ADC instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_ADC_REG_StartConversion(ADC_TypeDef *ADCx)
+{
+ /* Note: Write register with some additional bits forced to state reset */
+ /* instead of modifying only the selected bit for this function, */
+ /* to not interfere with bits with HW property "rs". */
+ MODIFY_REG(ADCx->CR,
+ ADC_CR_BITS_PROPERTY_RS,
+ ADC_CR_ADSTART);
+}
+
+/**
+ * @brief Stop ADC group regular conversion.
+ * @note On this STM32 serie, setting of this feature is conditioned to
+ * ADC state:
+ * ADC must be enabled with conversion on going on group regular,
+ * without ADC disable command on going.
+ * @rmtoll CR ADSTP LL_ADC_REG_StopConversion
+ * @param ADCx ADC instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_ADC_REG_StopConversion(ADC_TypeDef *ADCx)
+{
+ /* Note: Write register with some additional bits forced to state reset */
+ /* instead of modifying only the selected bit for this function, */
+ /* to not interfere with bits with HW property "rs". */
+ MODIFY_REG(ADCx->CR,
+ ADC_CR_BITS_PROPERTY_RS,
+ ADC_CR_ADSTP);
+}
+
+/**
+ * @brief Get ADC group regular conversion state.
+ * @rmtoll CR ADSTART LL_ADC_REG_IsConversionOngoing
+ * @param ADCx ADC instance
+ * @retval 0: no conversion is on going on ADC group regular.
+ */
+__STATIC_INLINE uint32_t LL_ADC_REG_IsConversionOngoing(ADC_TypeDef *ADCx)
+{
+ return (READ_BIT(ADCx->CR, ADC_CR_ADSTART) == (ADC_CR_ADSTART));
+}
+
+/**
+ * @brief Get ADC group regular command of conversion stop state
+ * @rmtoll CR ADSTP LL_ADC_REG_IsStopConversionOngoing
+ * @param ADCx ADC instance
+ * @retval 0: no command of conversion stop is on going on ADC group regular.
+ */
+__STATIC_INLINE uint32_t LL_ADC_REG_IsStopConversionOngoing(ADC_TypeDef *ADCx)
+{
+ return (READ_BIT(ADCx->CR, ADC_CR_ADSTP) == (ADC_CR_ADSTP));
+}
+
+/**
+ * @brief Get ADC group regular conversion data, range fit for
+ * all ADC configurations: all ADC resolutions and
+ * all oversampling increased data width (for devices
+ * with feature oversampling).
+ * @rmtoll DR DATA LL_ADC_REG_ReadConversionData32
+ * @param ADCx ADC instance
+ * @retval Value between Min_Data=0x00000000 and Max_Data=0xFFFFFFFF
+ */
+__STATIC_INLINE uint32_t LL_ADC_REG_ReadConversionData32(ADC_TypeDef *ADCx)
+{
+ return (uint32_t)(READ_BIT(ADCx->DR, ADC_DR_DATA));
+}
+
+/**
+ * @brief Get ADC group regular conversion data, range fit for
+ * ADC resolution 12 bits.
+ * @note For devices with feature oversampling: Oversampling
+ * can increase data width, function for extended range
+ * may be needed: @ref LL_ADC_REG_ReadConversionData32.
+ * @rmtoll DR DATA LL_ADC_REG_ReadConversionData12
+ * @param ADCx ADC instance
+ * @retval Value between Min_Data=0x000 and Max_Data=0xFFF
+ */
+__STATIC_INLINE uint16_t LL_ADC_REG_ReadConversionData12(ADC_TypeDef *ADCx)
+{
+ return (uint16_t)(READ_BIT(ADCx->DR, ADC_DR_DATA));
+}
+
+/**
+ * @brief Get ADC group regular conversion data, range fit for
+ * ADC resolution 10 bits.
+ * @note For devices with feature oversampling: Oversampling
+ * can increase data width, function for extended range
+ * may be needed: @ref LL_ADC_REG_ReadConversionData32.
+ * @rmtoll DR DATA LL_ADC_REG_ReadConversionData10
+ * @param ADCx ADC instance
+ * @retval Value between Min_Data=0x000 and Max_Data=0x3FF
+ */
+__STATIC_INLINE uint16_t LL_ADC_REG_ReadConversionData10(ADC_TypeDef *ADCx)
+{
+ return (uint16_t)(READ_BIT(ADCx->DR, ADC_DR_DATA));
+}
+
+/**
+ * @brief Get ADC group regular conversion data, range fit for
+ * ADC resolution 8 bits.
+ * @note For devices with feature oversampling: Oversampling
+ * can increase data width, function for extended range
+ * may be needed: @ref LL_ADC_REG_ReadConversionData32.
+ * @rmtoll DR DATA LL_ADC_REG_ReadConversionData8
+ * @param ADCx ADC instance
+ * @retval Value between Min_Data=0x00 and Max_Data=0xFF
+ */
+__STATIC_INLINE uint8_t LL_ADC_REG_ReadConversionData8(ADC_TypeDef *ADCx)
+{
+ return (uint8_t)(READ_BIT(ADCx->DR, ADC_DR_DATA));
+}
+
+/**
+ * @brief Get ADC group regular conversion data, range fit for
+ * ADC resolution 6 bits.
+ * @note For devices with feature oversampling: Oversampling
+ * can increase data width, function for extended range
+ * may be needed: @ref LL_ADC_REG_ReadConversionData32.
+ * @rmtoll DR DATA LL_ADC_REG_ReadConversionData6
+ * @param ADCx ADC instance
+ * @retval Value between Min_Data=0x00 and Max_Data=0x3F
+ */
+__STATIC_INLINE uint8_t LL_ADC_REG_ReadConversionData6(ADC_TypeDef *ADCx)
+{
+ return (uint8_t)(READ_BIT(ADCx->DR, ADC_DR_DATA));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup ADC_LL_EF_FLAG_Management ADC flag management
+ * @{
+ */
+
+/**
+ * @brief Get flag ADC ready.
+ * @note On this STM32 serie, flag LL_ADC_FLAG_ADRDY is raised when the ADC
+ * is enabled and when conversion clock is active.
+ * (not only core clock: this ADC has a dual clock domain)
+ * @rmtoll ISR ADRDY LL_ADC_IsActiveFlag_ADRDY
+ * @param ADCx ADC instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_ADRDY(ADC_TypeDef *ADCx)
+{
+ return (READ_BIT(ADCx->ISR, LL_ADC_FLAG_ADRDY) == (LL_ADC_FLAG_ADRDY));
+}
+
+/**
+ * @brief Get flag ADC group regular end of unitary conversion.
+ * @rmtoll ISR EOC LL_ADC_IsActiveFlag_EOC
+ * @param ADCx ADC instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_EOC(ADC_TypeDef *ADCx)
+{
+ return (READ_BIT(ADCx->ISR, ADC_ISR_EOC) == (ADC_ISR_EOC));
+}
+
+/**
+ * @brief Get flag ADC group regular end of sequence conversions.
+ * @rmtoll ISR EOSEQ LL_ADC_IsActiveFlag_EOS
+ * @param ADCx ADC instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_EOS(ADC_TypeDef *ADCx)
+{
+ return (READ_BIT(ADCx->ISR, LL_ADC_FLAG_EOS) == (LL_ADC_FLAG_EOS));
+}
+
+/**
+ * @brief Get flag ADC group regular overrun.
+ * @rmtoll ISR OVR LL_ADC_IsActiveFlag_OVR
+ * @param ADCx ADC instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_OVR(ADC_TypeDef *ADCx)
+{
+ return (READ_BIT(ADCx->ISR, LL_ADC_FLAG_OVR) == (LL_ADC_FLAG_OVR));
+}
+
+/**
+ * @brief Get flag ADC group regular end of sampling phase.
+ * @rmtoll ISR EOSMP LL_ADC_IsActiveFlag_EOSMP
+ * @param ADCx ADC instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_EOSMP(ADC_TypeDef *ADCx)
+{
+ return (READ_BIT(ADCx->ISR, LL_ADC_FLAG_EOSMP) == (LL_ADC_FLAG_EOSMP));
+}
+
+/**
+ * @brief Get flag ADC analog watchdog 1 flag
+ * @rmtoll ISR AWD LL_ADC_IsActiveFlag_AWD1
+ * @param ADCx ADC instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_AWD1(ADC_TypeDef *ADCx)
+{
+ return (READ_BIT(ADCx->ISR, LL_ADC_FLAG_AWD1) == (LL_ADC_FLAG_AWD1));
+}
+
+/**
+ * @brief Clear flag ADC ready.
+ * @note On this STM32 serie, flag LL_ADC_FLAG_ADRDY is raised when the ADC
+ * is enabled and when conversion clock is active.
+ * (not only core clock: this ADC has a dual clock domain)
+ * @rmtoll ISR ADRDY LL_ADC_ClearFlag_ADRDY
+ * @param ADCx ADC instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_ADC_ClearFlag_ADRDY(ADC_TypeDef *ADCx)
+{
+ WRITE_REG(ADCx->ISR, LL_ADC_FLAG_ADRDY);
+}
+
+/**
+ * @brief Clear flag ADC group regular end of unitary conversion.
+ * @rmtoll ISR EOC LL_ADC_ClearFlag_EOC
+ * @param ADCx ADC instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_ADC_ClearFlag_EOC(ADC_TypeDef *ADCx)
+{
+ WRITE_REG(ADCx->ISR, LL_ADC_FLAG_EOC);
+}
+
+/**
+ * @brief Clear flag ADC group regular end of sequence conversions.
+ * @rmtoll ISR EOSEQ LL_ADC_ClearFlag_EOS
+ * @param ADCx ADC instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_ADC_ClearFlag_EOS(ADC_TypeDef *ADCx)
+{
+ WRITE_REG(ADCx->ISR, LL_ADC_FLAG_EOS);
+}
+
+/**
+ * @brief Clear flag ADC group regular overrun.
+ * @rmtoll ISR OVR LL_ADC_ClearFlag_OVR
+ * @param ADCx ADC instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_ADC_ClearFlag_OVR(ADC_TypeDef *ADCx)
+{
+ WRITE_REG(ADCx->ISR, LL_ADC_FLAG_OVR);
+}
+
+/**
+ * @brief Clear flag ADC group regular end of sampling phase.
+ * @rmtoll ISR EOSMP LL_ADC_ClearFlag_EOSMP
+ * @param ADCx ADC instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_ADC_ClearFlag_EOSMP(ADC_TypeDef *ADCx)
+{
+ WRITE_REG(ADCx->ISR, LL_ADC_FLAG_EOSMP);
+}
+
+/**
+ * @brief Clear flag ADC analog watchdog 1.
+ * @rmtoll ISR AWD LL_ADC_ClearFlag_AWD1
+ * @param ADCx ADC instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_ADC_ClearFlag_AWD1(ADC_TypeDef *ADCx)
+{
+ WRITE_REG(ADCx->ISR, LL_ADC_FLAG_AWD1);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup ADC_LL_EF_IT_Management ADC IT management
+ * @{
+ */
+
+/**
+ * @brief Enable ADC ready.
+ * @rmtoll IER ADRDYIE LL_ADC_EnableIT_ADRDY
+ * @param ADCx ADC instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_ADC_EnableIT_ADRDY(ADC_TypeDef *ADCx)
+{
+ SET_BIT(ADCx->IER, LL_ADC_IT_ADRDY);
+}
+
+/**
+ * @brief Enable interruption ADC group regular end of unitary conversion.
+ * @rmtoll IER EOCIE LL_ADC_EnableIT_EOC
+ * @param ADCx ADC instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_ADC_EnableIT_EOC(ADC_TypeDef *ADCx)
+{
+ SET_BIT(ADCx->IER, LL_ADC_IT_EOC);
+}
+
+/**
+ * @brief Enable interruption ADC group regular end of sequence conversions.
+ * @rmtoll IER EOSEQIE LL_ADC_EnableIT_EOS
+ * @param ADCx ADC instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_ADC_EnableIT_EOS(ADC_TypeDef *ADCx)
+{
+ SET_BIT(ADCx->IER, LL_ADC_IT_EOS);
+}
+
+/**
+ * @brief Enable ADC group regular interruption overrun.
+ * @rmtoll IER OVRIE LL_ADC_EnableIT_OVR
+ * @param ADCx ADC instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_ADC_EnableIT_OVR(ADC_TypeDef *ADCx)
+{
+ SET_BIT(ADCx->IER, LL_ADC_IT_OVR);
+}
+
+/**
+ * @brief Enable interruption ADC group regular end of sampling.
+ * @rmtoll IER EOSMPIE LL_ADC_EnableIT_EOSMP
+ * @param ADCx ADC instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_ADC_EnableIT_EOSMP(ADC_TypeDef *ADCx)
+{
+ SET_BIT(ADCx->IER, LL_ADC_IT_EOSMP);
+}
+
+/**
+ * @brief Enable interruption ADC analog watchdog 1.
+ * @rmtoll IER AWDIE LL_ADC_EnableIT_AWD1
+ * @param ADCx ADC instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_ADC_EnableIT_AWD1(ADC_TypeDef *ADCx)
+{
+ SET_BIT(ADCx->IER, LL_ADC_IT_AWD1);
+}
+
+/**
+ * @brief Disable interruption ADC ready.
+ * @rmtoll IER ADRDYIE LL_ADC_DisableIT_ADRDY
+ * @param ADCx ADC instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_ADC_DisableIT_ADRDY(ADC_TypeDef *ADCx)
+{
+ CLEAR_BIT(ADCx->IER, LL_ADC_IT_ADRDY);
+}
+
+/**
+ * @brief Disable interruption ADC group regular end of unitary conversion.
+ * @rmtoll IER EOCIE LL_ADC_DisableIT_EOC
+ * @param ADCx ADC instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_ADC_DisableIT_EOC(ADC_TypeDef *ADCx)
+{
+ CLEAR_BIT(ADCx->IER, LL_ADC_IT_EOC);
+}
+
+/**
+ * @brief Disable interruption ADC group regular end of sequence conversions.
+ * @rmtoll IER EOSEQIE LL_ADC_DisableIT_EOS
+ * @param ADCx ADC instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_ADC_DisableIT_EOS(ADC_TypeDef *ADCx)
+{
+ CLEAR_BIT(ADCx->IER, LL_ADC_IT_EOS);
+}
+
+/**
+ * @brief Disable interruption ADC group regular overrun.
+ * @rmtoll IER OVRIE LL_ADC_DisableIT_OVR
+ * @param ADCx ADC instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_ADC_DisableIT_OVR(ADC_TypeDef *ADCx)
+{
+ CLEAR_BIT(ADCx->IER, LL_ADC_IT_OVR);
+}
+
+/**
+ * @brief Disable interruption ADC group regular end of sampling.
+ * @rmtoll IER EOSMPIE LL_ADC_DisableIT_EOSMP
+ * @param ADCx ADC instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_ADC_DisableIT_EOSMP(ADC_TypeDef *ADCx)
+{
+ CLEAR_BIT(ADCx->IER, LL_ADC_IT_EOSMP);
+}
+
+/**
+ * @brief Disable interruption ADC analog watchdog 1.
+ * @rmtoll IER AWDIE LL_ADC_DisableIT_AWD1
+ * @param ADCx ADC instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_ADC_DisableIT_AWD1(ADC_TypeDef *ADCx)
+{
+ CLEAR_BIT(ADCx->IER, LL_ADC_IT_AWD1);
+}
+
+/**
+ * @brief Get state of interruption ADC ready
+ * (0: interrupt disabled, 1: interrupt enabled).
+ * @rmtoll IER ADRDYIE LL_ADC_IsEnabledIT_ADRDY
+ * @param ADCx ADC instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_ADRDY(ADC_TypeDef *ADCx)
+{
+ return (READ_BIT(ADCx->IER, LL_ADC_IT_ADRDY) == (LL_ADC_IT_ADRDY));
+}
+
+/**
+ * @brief Get state of interruption ADC group regular end of unitary conversion
+ * (0: interrupt disabled, 1: interrupt enabled).
+ * @rmtoll IER EOCIE LL_ADC_IsEnabledIT_EOC
+ * @param ADCx ADC instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_EOC(ADC_TypeDef *ADCx)
+{
+ return (READ_BIT(ADCx->IER, LL_ADC_IT_EOC) == (LL_ADC_IT_EOC));
+}
+
+/**
+ * @brief Get state of interruption ADC group regular end of sequence conversions
+ * (0: interrupt disabled, 1: interrupt enabled).
+ * @rmtoll IER EOSEQIE LL_ADC_IsEnabledIT_EOS
+ * @param ADCx ADC instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_EOS(ADC_TypeDef *ADCx)
+{
+ return (READ_BIT(ADCx->IER, LL_ADC_IT_EOS) == (LL_ADC_IT_EOS));
+}
+
+/**
+ * @brief Get state of interruption ADC group regular overrun
+ * (0: interrupt disabled, 1: interrupt enabled).
+ * @rmtoll IER OVRIE LL_ADC_IsEnabledIT_OVR
+ * @param ADCx ADC instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_OVR(ADC_TypeDef *ADCx)
+{
+ return (READ_BIT(ADCx->IER, LL_ADC_IT_OVR) == (LL_ADC_IT_OVR));
+}
+
+/**
+ * @brief Get state of interruption ADC group regular end of sampling
+ * (0: interrupt disabled, 1: interrupt enabled).
+ * @rmtoll IER EOSMPIE LL_ADC_IsEnabledIT_EOSMP
+ * @param ADCx ADC instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_EOSMP(ADC_TypeDef *ADCx)
+{
+ return (READ_BIT(ADCx->IER, LL_ADC_IT_EOSMP) == (LL_ADC_IT_EOSMP));
+}
+
+/**
+ * @brief Get state of interruption ADC analog watchdog 1
+ * (0: interrupt disabled, 1: interrupt enabled).
+ * @rmtoll IER AWDIE LL_ADC_IsEnabledIT_AWD1
+ * @param ADCx ADC instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_AWD1(ADC_TypeDef *ADCx)
+{
+ return (READ_BIT(ADCx->IER, LL_ADC_IT_AWD1) == (LL_ADC_IT_AWD1));
+}
+
+/**
+ * @}
+ */
+
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup ADC_LL_EF_Init Initialization and de-initialization functions
+ * @{
+ */
+
+/* Initialization of some features of ADC common parameters and multimode */
+/* Note: On this STM32 serie, there is no ADC common initialization */
+/* function. */
+ErrorStatus LL_ADC_CommonDeInit(ADC_Common_TypeDef *ADCxy_COMMON);
+
+/* De-initialization of ADC instance */
+ErrorStatus LL_ADC_DeInit(ADC_TypeDef *ADCx);
+
+/* Initialization of some features of ADC instance */
+ErrorStatus LL_ADC_Init(ADC_TypeDef *ADCx, LL_ADC_InitTypeDef *ADC_InitStruct);
+void LL_ADC_StructInit(LL_ADC_InitTypeDef *ADC_InitStruct);
+
+/* Initialization of some features of ADC instance and ADC group regular */
+ErrorStatus LL_ADC_REG_Init(ADC_TypeDef *ADCx, LL_ADC_REG_InitTypeDef *ADC_REG_InitStruct);
+void LL_ADC_REG_StructInit(LL_ADC_REG_InitTypeDef *ADC_REG_InitStruct);
+
+/**
+ * @}
+ */
+#endif /* USE_FULL_LL_DRIVER */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* ADC1 */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_LL_ADC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_bus.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_bus.h
new file mode 100644
index 0000000..b85c02f
--- /dev/null
+++ b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_bus.h
@@ -0,0 +1,845 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_ll_bus.h
+ * @author MCD Application Team
+ * @brief Header file of BUS LL module.
+
+ @verbatim
+ ##### RCC Limitations #####
+ ==============================================================================
+ [..]
+ A delay between an RCC peripheral clock enable and the effective peripheral
+ enabling should be taken into account in order to manage the peripheral read/write
+ from/to registers.
+ (+) This delay depends on the peripheral mapping.
+ (++) AHB & APB peripherals, 1 dummy read is necessary
+
+ [..]
+ Workarounds:
+ (#) For AHB & APB peripherals, a dummy read to the peripheral register has been
+ inserted in each LL_{BUS}_GRP{x}_EnableClock() function.
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_LL_BUS_H
+#define __STM32F0xx_LL_BUS_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx.h"
+
+/** @addtogroup STM32F0xx_LL_Driver
+ * @{
+ */
+
+#if defined(RCC)
+
+/** @defgroup BUS_LL BUS
+ * @{
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+
+/* Private constants ---------------------------------------------------------*/
+
+/* Private macros ------------------------------------------------------------*/
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup BUS_LL_Exported_Constants BUS Exported Constants
+ * @{
+ */
+
+/** @defgroup BUS_LL_EC_AHB1_GRP1_PERIPH AHB1 GRP1 PERIPH
+ * @{
+ */
+#define LL_AHB1_GRP1_PERIPH_ALL (uint32_t)0xFFFFFFFFU
+#define LL_AHB1_GRP1_PERIPH_DMA1 RCC_AHBENR_DMA1EN
+#if defined(DMA2)
+#define LL_AHB1_GRP1_PERIPH_DMA2 RCC_AHBENR_DMA2EN
+#endif /*DMA2*/
+#define LL_AHB1_GRP1_PERIPH_SRAM RCC_AHBENR_SRAMEN
+#define LL_AHB1_GRP1_PERIPH_FLASH RCC_AHBENR_FLITFEN
+#define LL_AHB1_GRP1_PERIPH_CRC RCC_AHBENR_CRCEN
+#define LL_AHB1_GRP1_PERIPH_GPIOA RCC_AHBENR_GPIOAEN
+#define LL_AHB1_GRP1_PERIPH_GPIOB RCC_AHBENR_GPIOBEN
+#define LL_AHB1_GRP1_PERIPH_GPIOC RCC_AHBENR_GPIOCEN
+#if defined(GPIOD)
+#define LL_AHB1_GRP1_PERIPH_GPIOD RCC_AHBENR_GPIODEN
+#endif /*GPIOD*/
+#if defined(GPIOE)
+#define LL_AHB1_GRP1_PERIPH_GPIOE RCC_AHBENR_GPIOEEN
+#endif /*GPIOE*/
+#define LL_AHB1_GRP1_PERIPH_GPIOF RCC_AHBENR_GPIOFEN
+#if defined(TSC)
+#define LL_AHB1_GRP1_PERIPH_TSC RCC_AHBENR_TSCEN
+#endif /*TSC*/
+/**
+ * @}
+ */
+
+/** @defgroup BUS_LL_EC_APB1_GRP1_PERIPH APB1 GRP1 PERIPH
+ * @{
+ */
+#define LL_APB1_GRP1_PERIPH_ALL (uint32_t)0xFFFFFFFFU
+#if defined(TIM2)
+#define LL_APB1_GRP1_PERIPH_TIM2 RCC_APB1ENR_TIM2EN
+#endif /*TIM2*/
+#define LL_APB1_GRP1_PERIPH_TIM3 RCC_APB1ENR_TIM3EN
+#if defined(TIM6)
+#define LL_APB1_GRP1_PERIPH_TIM6 RCC_APB1ENR_TIM6EN
+#endif /*TIM6*/
+#if defined(TIM7)
+#define LL_APB1_GRP1_PERIPH_TIM7 RCC_APB1ENR_TIM7EN
+#endif /*TIM7*/
+#define LL_APB1_GRP1_PERIPH_TIM14 RCC_APB1ENR_TIM14EN
+#define LL_APB1_GRP1_PERIPH_WWDG RCC_APB1ENR_WWDGEN
+#if defined(SPI2)
+#define LL_APB1_GRP1_PERIPH_SPI2 RCC_APB1ENR_SPI2EN
+#endif /*SPI2*/
+#if defined(USART2)
+#define LL_APB1_GRP1_PERIPH_USART2 RCC_APB1ENR_USART2EN
+#endif /* USART2 */
+#if defined(USART3)
+#define LL_APB1_GRP1_PERIPH_USART3 RCC_APB1ENR_USART3EN
+#endif /* USART3 */
+#if defined(USART4)
+#define LL_APB1_GRP1_PERIPH_USART4 RCC_APB1ENR_USART4EN
+#endif /* USART4 */
+#if defined(USART5)
+#define LL_APB1_GRP1_PERIPH_USART5 RCC_APB1ENR_USART5EN
+#endif /* USART5 */
+#define LL_APB1_GRP1_PERIPH_I2C1 RCC_APB1ENR_I2C1EN
+#if defined(I2C2)
+#define LL_APB1_GRP1_PERIPH_I2C2 RCC_APB1ENR_I2C2EN
+#endif /*I2C2*/
+#if defined(USB)
+#define LL_APB1_GRP1_PERIPH_USB RCC_APB1ENR_USBEN
+#endif /* USB */
+#if defined(CAN)
+#define LL_APB1_GRP1_PERIPH_CAN RCC_APB1ENR_CANEN
+#endif /*CAN*/
+#if defined(CRS)
+#define LL_APB1_GRP1_PERIPH_CRS RCC_APB1ENR_CRSEN
+#endif /*CRS*/
+#define LL_APB1_GRP1_PERIPH_PWR RCC_APB1ENR_PWREN
+#if defined(DAC)
+#define LL_APB1_GRP1_PERIPH_DAC1 RCC_APB1ENR_DACEN
+#endif /*DAC*/
+#if defined(CEC)
+#define LL_APB1_GRP1_PERIPH_CEC RCC_APB1ENR_CECEN
+#endif /*CEC*/
+/**
+ * @}
+ */
+
+/** @defgroup BUS_LL_EC_APB1_GRP2_PERIPH APB1 GRP2 PERIPH
+ * @{
+ */
+#define LL_APB1_GRP2_PERIPH_ALL (uint32_t)0xFFFFFFFFU
+#define LL_APB1_GRP2_PERIPH_SYSCFG RCC_APB2ENR_SYSCFGEN
+#define LL_APB1_GRP2_PERIPH_ADC1 RCC_APB2ENR_ADC1EN
+#if defined(USART8)
+#define LL_APB1_GRP2_PERIPH_USART8 RCC_APB2ENR_USART8EN
+#endif /*USART8*/
+#if defined(USART7)
+#define LL_APB1_GRP2_PERIPH_USART7 RCC_APB2ENR_USART7EN
+#endif /*USART7*/
+#if defined(USART6)
+#define LL_APB1_GRP2_PERIPH_USART6 RCC_APB2ENR_USART6EN
+#endif /*USART6*/
+#define LL_APB1_GRP2_PERIPH_TIM1 RCC_APB2ENR_TIM1EN
+#define LL_APB1_GRP2_PERIPH_SPI1 RCC_APB2ENR_SPI1EN
+#define LL_APB1_GRP2_PERIPH_USART1 RCC_APB2ENR_USART1EN
+#if defined(TIM15)
+#define LL_APB1_GRP2_PERIPH_TIM15 RCC_APB2ENR_TIM15EN
+#endif /*TIM15*/
+#define LL_APB1_GRP2_PERIPH_TIM16 RCC_APB2ENR_TIM16EN
+#define LL_APB1_GRP2_PERIPH_TIM17 RCC_APB2ENR_TIM17EN
+#define LL_APB1_GRP2_PERIPH_DBGMCU RCC_APB2ENR_DBGMCUEN
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup BUS_LL_Exported_Functions BUS Exported Functions
+ * @{
+ */
+
+/** @defgroup BUS_LL_EF_AHB1 AHB1
+ * @{
+ */
+
+/**
+ * @brief Enable AHB1 peripherals clock.
+ * @rmtoll AHBENR DMA1EN LL_AHB1_GRP1_EnableClock\n
+ * AHBENR DMA2EN LL_AHB1_GRP1_EnableClock\n
+ * AHBENR SRAMEN LL_AHB1_GRP1_EnableClock\n
+ * AHBENR FLITFEN LL_AHB1_GRP1_EnableClock\n
+ * AHBENR CRCEN LL_AHB1_GRP1_EnableClock\n
+ * AHBENR GPIOAEN LL_AHB1_GRP1_EnableClock\n
+ * AHBENR GPIOBEN LL_AHB1_GRP1_EnableClock\n
+ * AHBENR GPIOCEN LL_AHB1_GRP1_EnableClock\n
+ * AHBENR GPIODEN LL_AHB1_GRP1_EnableClock\n
+ * AHBENR GPIOEEN LL_AHB1_GRP1_EnableClock\n
+ * AHBENR GPIOFEN LL_AHB1_GRP1_EnableClock\n
+ * AHBENR TSCEN LL_AHB1_GRP1_EnableClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_SRAM
+ * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH
+ * @arg @ref LL_AHB1_GRP1_PERIPH_CRC
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF
+ * @arg @ref LL_AHB1_GRP1_PERIPH_TSC (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB1_GRP1_EnableClock(uint32_t Periphs)
+{
+ __IO uint32_t tmpreg;
+ SET_BIT(RCC->AHBENR, Periphs);
+ /* Delay after an RCC peripheral clock enabling */
+ tmpreg = READ_BIT(RCC->AHBENR, Periphs);
+ (void)tmpreg;
+}
+
+/**
+ * @brief Check if AHB1 peripheral clock is enabled or not
+ * @rmtoll AHBENR DMA1EN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHBENR DMA2EN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHBENR SRAMEN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHBENR FLITFEN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHBENR CRCEN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHBENR GPIOAEN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHBENR GPIOBEN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHBENR GPIOCEN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHBENR GPIODEN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHBENR GPIOEEN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHBENR GPIOFEN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHBENR TSCEN LL_AHB1_GRP1_IsEnabledClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_SRAM
+ * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH
+ * @arg @ref LL_AHB1_GRP1_PERIPH_CRC
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF
+ * @arg @ref LL_AHB1_GRP1_PERIPH_TSC (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval State of Periphs (1 or 0).
+*/
+__STATIC_INLINE uint32_t LL_AHB1_GRP1_IsEnabledClock(uint32_t Periphs)
+{
+ return (READ_BIT(RCC->AHBENR, Periphs) == Periphs);
+}
+
+/**
+ * @brief Disable AHB1 peripherals clock.
+ * @rmtoll AHBENR DMA1EN LL_AHB1_GRP1_DisableClock\n
+ * AHBENR DMA2EN LL_AHB1_GRP1_DisableClock\n
+ * AHBENR SRAMEN LL_AHB1_GRP1_DisableClock\n
+ * AHBENR FLITFEN LL_AHB1_GRP1_DisableClock\n
+ * AHBENR CRCEN LL_AHB1_GRP1_DisableClock\n
+ * AHBENR GPIOAEN LL_AHB1_GRP1_DisableClock\n
+ * AHBENR GPIOBEN LL_AHB1_GRP1_DisableClock\n
+ * AHBENR GPIOCEN LL_AHB1_GRP1_DisableClock\n
+ * AHBENR GPIODEN LL_AHB1_GRP1_DisableClock\n
+ * AHBENR GPIOEEN LL_AHB1_GRP1_DisableClock\n
+ * AHBENR GPIOFEN LL_AHB1_GRP1_DisableClock\n
+ * AHBENR TSCEN LL_AHB1_GRP1_DisableClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_SRAM
+ * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH
+ * @arg @ref LL_AHB1_GRP1_PERIPH_CRC
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF
+ * @arg @ref LL_AHB1_GRP1_PERIPH_TSC (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB1_GRP1_DisableClock(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->AHBENR, Periphs);
+}
+
+/**
+ * @brief Force AHB1 peripherals reset.
+ * @rmtoll AHBRSTR GPIOARST LL_AHB1_GRP1_ForceReset\n
+ * AHBRSTR GPIOBRST LL_AHB1_GRP1_ForceReset\n
+ * AHBRSTR GPIOCRST LL_AHB1_GRP1_ForceReset\n
+ * AHBRSTR GPIODRST LL_AHB1_GRP1_ForceReset\n
+ * AHBRSTR GPIOERST LL_AHB1_GRP1_ForceReset\n
+ * AHBRSTR GPIOFRST LL_AHB1_GRP1_ForceReset\n
+ * AHBRSTR TSCRST LL_AHB1_GRP1_ForceReset
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB1_GRP1_PERIPH_ALL
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF
+ * @arg @ref LL_AHB1_GRP1_PERIPH_TSC (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB1_GRP1_ForceReset(uint32_t Periphs)
+{
+ SET_BIT(RCC->AHBRSTR, Periphs);
+}
+
+/**
+ * @brief Release AHB1 peripherals reset.
+ * @rmtoll AHBRSTR GPIOARST LL_AHB1_GRP1_ReleaseReset\n
+ * AHBRSTR GPIOBRST LL_AHB1_GRP1_ReleaseReset\n
+ * AHBRSTR GPIOCRST LL_AHB1_GRP1_ReleaseReset\n
+ * AHBRSTR GPIODRST LL_AHB1_GRP1_ReleaseReset\n
+ * AHBRSTR GPIOERST LL_AHB1_GRP1_ReleaseReset\n
+ * AHBRSTR GPIOFRST LL_AHB1_GRP1_ReleaseReset\n
+ * AHBRSTR TSCRST LL_AHB1_GRP1_ReleaseReset
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB1_GRP1_PERIPH_ALL
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF
+ * @arg @ref LL_AHB1_GRP1_PERIPH_TSC (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB1_GRP1_ReleaseReset(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->AHBRSTR, Periphs);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup BUS_LL_EF_APB1_GRP1 APB1 GRP1
+ * @{
+ */
+
+/**
+ * @brief Enable APB1 peripherals clock (available in register 1).
+ * @rmtoll APB1ENR TIM2EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR TIM3EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR TIM6EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR TIM7EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR TIM14EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR WWDGEN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR SPI2EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR USART2EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR USART3EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR USART4EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR USART5EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR I2C1EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR I2C2EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR USBEN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR CANEN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR CRSEN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR PWREN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR DACEN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR CECEN LL_APB1_GRP1_EnableClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM3
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM14
+ * @arg @ref LL_APB1_GRP1_PERIPH_WWDG
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART4 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART5 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C1
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_USB (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_CAN (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_CRS (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_PWR
+ * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_CEC (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB1_GRP1_EnableClock(uint32_t Periphs)
+{
+ __IO uint32_t tmpreg;
+ SET_BIT(RCC->APB1ENR, Periphs);
+ /* Delay after an RCC peripheral clock enabling */
+ tmpreg = READ_BIT(RCC->APB1ENR, Periphs);
+ (void)tmpreg;
+}
+
+/**
+ * @brief Check if APB1 peripheral clock is enabled or not (available in register 1).
+ * @rmtoll APB1ENR TIM2EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR TIM3EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR TIM6EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR TIM7EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR TIM14EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR WWDGEN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR SPI2EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR USART2EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR USART3EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR USART4EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR USART5EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR I2C1EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR I2C2EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR USBEN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR CANEN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR CRSEN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR PWREN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR DACEN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR CECEN LL_APB1_GRP1_IsEnabledClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM3
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM14
+ * @arg @ref LL_APB1_GRP1_PERIPH_WWDG
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART4 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART5 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C1
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_USB (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_CAN (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_CRS (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_PWR
+ * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_CEC (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval State of Periphs (1 or 0).
+*/
+__STATIC_INLINE uint32_t LL_APB1_GRP1_IsEnabledClock(uint32_t Periphs)
+{
+ return (READ_BIT(RCC->APB1ENR, Periphs) == Periphs);
+}
+
+/**
+ * @brief Disable APB1 peripherals clock (available in register 1).
+ * @rmtoll APB1ENR TIM2EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR TIM3EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR TIM6EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR TIM7EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR TIM14EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR WWDGEN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR SPI2EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR USART2EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR USART3EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR USART4EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR USART5EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR I2C1EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR I2C2EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR USBEN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR CANEN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR CRSEN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR PWREN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR DACEN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR CECEN LL_APB1_GRP1_DisableClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM3
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM14
+ * @arg @ref LL_APB1_GRP1_PERIPH_WWDG
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART4 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART5 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C1
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_USB (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_CAN (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_CRS (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_PWR
+ * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_CEC (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB1_GRP1_DisableClock(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->APB1ENR, Periphs);
+}
+
+/**
+ * @brief Force APB1 peripherals reset (available in register 1).
+ * @rmtoll APB1RSTR TIM2RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR TIM3RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR TIM6RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR TIM7RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR TIM14RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR WWDGRST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR SPI2RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR USART2RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR USART3RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR USART4RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR USART5RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR I2C1RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR I2C2RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR USBRST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR CANRST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR CRSRST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR PWRRST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR DACRST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR CECRST LL_APB1_GRP1_ForceReset
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB1_GRP1_PERIPH_ALL
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM3
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM14
+ * @arg @ref LL_APB1_GRP1_PERIPH_WWDG
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART4 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART5 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C1
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_USB (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_CAN (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_CRS (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_PWR
+ * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_CEC (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB1_GRP1_ForceReset(uint32_t Periphs)
+{
+ SET_BIT(RCC->APB1RSTR, Periphs);
+}
+
+/**
+ * @brief Release APB1 peripherals reset (available in register 1).
+ * @rmtoll APB1RSTR TIM2RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR TIM3RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR TIM6RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR TIM7RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR TIM14RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR WWDGRST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR SPI2RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR USART2RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR USART3RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR USART4RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR USART5RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR I2C1RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR I2C2RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR USBRST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR CANRST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR CRSRST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR PWRRST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR DACRST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR CECRST LL_APB1_GRP1_ReleaseReset
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB1_GRP1_PERIPH_ALL
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM3
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM14
+ * @arg @ref LL_APB1_GRP1_PERIPH_WWDG
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART4 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART5 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C1
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_USB (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_CAN (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_CRS (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_PWR
+ * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_CEC (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB1_GRP1_ReleaseReset(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->APB1RSTR, Periphs);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup BUS_LL_EF_APB1_GRP2 APB1 GRP2
+ * @{
+ */
+
+/**
+ * @brief Enable APB1 peripherals clock (available in register 2).
+ * @rmtoll APB2ENR SYSCFGEN LL_APB1_GRP2_EnableClock\n
+ * APB2ENR ADC1EN LL_APB1_GRP2_EnableClock\n
+ * APB2ENR USART8EN LL_APB1_GRP2_EnableClock\n
+ * APB2ENR USART7EN LL_APB1_GRP2_EnableClock\n
+ * APB2ENR USART6EN LL_APB1_GRP2_EnableClock\n
+ * APB2ENR TIM1EN LL_APB1_GRP2_EnableClock\n
+ * APB2ENR SPI1EN LL_APB1_GRP2_EnableClock\n
+ * APB2ENR USART1EN LL_APB1_GRP2_EnableClock\n
+ * APB2ENR TIM15EN LL_APB1_GRP2_EnableClock\n
+ * APB2ENR TIM16EN LL_APB1_GRP2_EnableClock\n
+ * APB2ENR TIM17EN LL_APB1_GRP2_EnableClock\n
+ * APB2ENR DBGMCUEN LL_APB1_GRP2_EnableClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB1_GRP2_PERIPH_SYSCFG
+ * @arg @ref LL_APB1_GRP2_PERIPH_ADC1
+ * @arg @ref LL_APB1_GRP2_PERIPH_USART8 (*)
+ * @arg @ref LL_APB1_GRP2_PERIPH_USART7 (*)
+ * @arg @ref LL_APB1_GRP2_PERIPH_USART6 (*)
+ * @arg @ref LL_APB1_GRP2_PERIPH_TIM1
+ * @arg @ref LL_APB1_GRP2_PERIPH_SPI1
+ * @arg @ref LL_APB1_GRP2_PERIPH_USART1
+ * @arg @ref LL_APB1_GRP2_PERIPH_TIM15 (*)
+ * @arg @ref LL_APB1_GRP2_PERIPH_TIM16
+ * @arg @ref LL_APB1_GRP2_PERIPH_TIM17
+ * @arg @ref LL_APB1_GRP2_PERIPH_DBGMCU
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB1_GRP2_EnableClock(uint32_t Periphs)
+{
+ __IO uint32_t tmpreg;
+ SET_BIT(RCC->APB2ENR, Periphs);
+ /* Delay after an RCC peripheral clock enabling */
+ tmpreg = READ_BIT(RCC->APB2ENR, Periphs);
+ (void)tmpreg;
+}
+
+/**
+ * @brief Check if APB1 peripheral clock is enabled or not (available in register 2).
+ * @rmtoll APB2ENR SYSCFGEN LL_APB1_GRP2_IsEnabledClock\n
+ * APB2ENR ADC1EN LL_APB1_GRP2_IsEnabledClock\n
+ * APB2ENR USART8EN LL_APB1_GRP2_IsEnabledClock\n
+ * APB2ENR USART7EN LL_APB1_GRP2_IsEnabledClock\n
+ * APB2ENR USART6EN LL_APB1_GRP2_IsEnabledClock\n
+ * APB2ENR TIM1EN LL_APB1_GRP2_IsEnabledClock\n
+ * APB2ENR SPI1EN LL_APB1_GRP2_IsEnabledClock\n
+ * APB2ENR USART1EN LL_APB1_GRP2_IsEnabledClock\n
+ * APB2ENR TIM15EN LL_APB1_GRP2_IsEnabledClock\n
+ * APB2ENR TIM16EN LL_APB1_GRP2_IsEnabledClock\n
+ * APB2ENR TIM17EN LL_APB1_GRP2_IsEnabledClock\n
+ * APB2ENR DBGMCUEN LL_APB1_GRP2_IsEnabledClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB1_GRP2_PERIPH_SYSCFG
+ * @arg @ref LL_APB1_GRP2_PERIPH_ADC1
+ * @arg @ref LL_APB1_GRP2_PERIPH_USART8 (*)
+ * @arg @ref LL_APB1_GRP2_PERIPH_USART7 (*)
+ * @arg @ref LL_APB1_GRP2_PERIPH_USART6 (*)
+ * @arg @ref LL_APB1_GRP2_PERIPH_TIM1
+ * @arg @ref LL_APB1_GRP2_PERIPH_SPI1
+ * @arg @ref LL_APB1_GRP2_PERIPH_USART1
+ * @arg @ref LL_APB1_GRP2_PERIPH_TIM15 (*)
+ * @arg @ref LL_APB1_GRP2_PERIPH_TIM16
+ * @arg @ref LL_APB1_GRP2_PERIPH_TIM17
+ * @arg @ref LL_APB1_GRP2_PERIPH_DBGMCU
+ *
+ * (*) value not defined in all devices.
+ * @retval State of Periphs (1 or 0).
+*/
+__STATIC_INLINE uint32_t LL_APB1_GRP2_IsEnabledClock(uint32_t Periphs)
+{
+ return (READ_BIT(RCC->APB2ENR, Periphs) == Periphs);
+}
+
+/**
+ * @brief Disable APB1 peripherals clock (available in register 2).
+ * @rmtoll APB2ENR SYSCFGEN LL_APB1_GRP2_DisableClock\n
+ * APB2ENR ADC1EN LL_APB1_GRP2_DisableClock\n
+ * APB2ENR USART8EN LL_APB1_GRP2_DisableClock\n
+ * APB2ENR USART7EN LL_APB1_GRP2_DisableClock\n
+ * APB2ENR USART6EN LL_APB1_GRP2_DisableClock\n
+ * APB2ENR TIM1EN LL_APB1_GRP2_DisableClock\n
+ * APB2ENR SPI1EN LL_APB1_GRP2_DisableClock\n
+ * APB2ENR USART1EN LL_APB1_GRP2_DisableClock\n
+ * APB2ENR TIM15EN LL_APB1_GRP2_DisableClock\n
+ * APB2ENR TIM16EN LL_APB1_GRP2_DisableClock\n
+ * APB2ENR TIM17EN LL_APB1_GRP2_DisableClock\n
+ * APB2ENR DBGMCUEN LL_APB1_GRP2_DisableClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB1_GRP2_PERIPH_SYSCFG
+ * @arg @ref LL_APB1_GRP2_PERIPH_ADC1
+ * @arg @ref LL_APB1_GRP2_PERIPH_USART8 (*)
+ * @arg @ref LL_APB1_GRP2_PERIPH_USART7 (*)
+ * @arg @ref LL_APB1_GRP2_PERIPH_USART6 (*)
+ * @arg @ref LL_APB1_GRP2_PERIPH_TIM1
+ * @arg @ref LL_APB1_GRP2_PERIPH_SPI1
+ * @arg @ref LL_APB1_GRP2_PERIPH_USART1
+ * @arg @ref LL_APB1_GRP2_PERIPH_TIM15 (*)
+ * @arg @ref LL_APB1_GRP2_PERIPH_TIM16
+ * @arg @ref LL_APB1_GRP2_PERIPH_TIM17
+ * @arg @ref LL_APB1_GRP2_PERIPH_DBGMCU
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB1_GRP2_DisableClock(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->APB2ENR, Periphs);
+}
+
+/**
+ * @brief Force APB1 peripherals reset (available in register 2).
+ * @rmtoll APB2RSTR SYSCFGRST LL_APB1_GRP2_ForceReset\n
+ * APB2RSTR ADC1RST LL_APB1_GRP2_ForceReset\n
+ * APB2RSTR USART8RST LL_APB1_GRP2_ForceReset\n
+ * APB2RSTR USART7RST LL_APB1_GRP2_ForceReset\n
+ * APB2RSTR USART6RST LL_APB1_GRP2_ForceReset\n
+ * APB2RSTR TIM1RST LL_APB1_GRP2_ForceReset\n
+ * APB2RSTR SPI1RST LL_APB1_GRP2_ForceReset\n
+ * APB2RSTR USART1RST LL_APB1_GRP2_ForceReset\n
+ * APB2RSTR TIM15RST LL_APB1_GRP2_ForceReset\n
+ * APB2RSTR TIM16RST LL_APB1_GRP2_ForceReset\n
+ * APB2RSTR TIM17RST LL_APB1_GRP2_ForceReset\n
+ * APB2RSTR DBGMCURST LL_APB1_GRP2_ForceReset
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB1_GRP2_PERIPH_ALL
+ * @arg @ref LL_APB1_GRP2_PERIPH_SYSCFG
+ * @arg @ref LL_APB1_GRP2_PERIPH_ADC1
+ * @arg @ref LL_APB1_GRP2_PERIPH_USART8 (*)
+ * @arg @ref LL_APB1_GRP2_PERIPH_USART7 (*)
+ * @arg @ref LL_APB1_GRP2_PERIPH_USART6 (*)
+ * @arg @ref LL_APB1_GRP2_PERIPH_TIM1
+ * @arg @ref LL_APB1_GRP2_PERIPH_SPI1
+ * @arg @ref LL_APB1_GRP2_PERIPH_USART1
+ * @arg @ref LL_APB1_GRP2_PERIPH_TIM15 (*)
+ * @arg @ref LL_APB1_GRP2_PERIPH_TIM16
+ * @arg @ref LL_APB1_GRP2_PERIPH_TIM17
+ * @arg @ref LL_APB1_GRP2_PERIPH_DBGMCU
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB1_GRP2_ForceReset(uint32_t Periphs)
+{
+ SET_BIT(RCC->APB2RSTR, Periphs);
+}
+
+/**
+ * @brief Release APB1 peripherals reset (available in register 2).
+ * @rmtoll APB2RSTR SYSCFGRST LL_APB1_GRP2_ReleaseReset\n
+ * APB2RSTR ADC1RST LL_APB1_GRP2_ReleaseReset\n
+ * APB2RSTR USART8RST LL_APB1_GRP2_ReleaseReset\n
+ * APB2RSTR USART7RST LL_APB1_GRP2_ReleaseReset\n
+ * APB2RSTR USART6RST LL_APB1_GRP2_ReleaseReset\n
+ * APB2RSTR TIM1RST LL_APB1_GRP2_ReleaseReset\n
+ * APB2RSTR SPI1RST LL_APB1_GRP2_ReleaseReset\n
+ * APB2RSTR USART1RST LL_APB1_GRP2_ReleaseReset\n
+ * APB2RSTR TIM15RST LL_APB1_GRP2_ReleaseReset\n
+ * APB2RSTR TIM16RST LL_APB1_GRP2_ReleaseReset\n
+ * APB2RSTR TIM17RST LL_APB1_GRP2_ReleaseReset\n
+ * APB2RSTR DBGMCURST LL_APB1_GRP2_ReleaseReset
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB1_GRP2_PERIPH_ALL
+ * @arg @ref LL_APB1_GRP2_PERIPH_SYSCFG
+ * @arg @ref LL_APB1_GRP2_PERIPH_ADC1
+ * @arg @ref LL_APB1_GRP2_PERIPH_USART8 (*)
+ * @arg @ref LL_APB1_GRP2_PERIPH_USART7 (*)
+ * @arg @ref LL_APB1_GRP2_PERIPH_USART6 (*)
+ * @arg @ref LL_APB1_GRP2_PERIPH_TIM1
+ * @arg @ref LL_APB1_GRP2_PERIPH_SPI1
+ * @arg @ref LL_APB1_GRP2_PERIPH_USART1
+ * @arg @ref LL_APB1_GRP2_PERIPH_TIM15 (*)
+ * @arg @ref LL_APB1_GRP2_PERIPH_TIM16
+ * @arg @ref LL_APB1_GRP2_PERIPH_TIM17
+ * @arg @ref LL_APB1_GRP2_PERIPH_DBGMCU
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB1_GRP2_ReleaseReset(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->APB2RSTR, Periphs);
+}
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* defined(RCC) */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_LL_BUS_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_comp.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_comp.h
new file mode 100644
index 0000000..1dcde86
--- /dev/null
+++ b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_comp.h
@@ -0,0 +1,831 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_ll_comp.h
+ * @author MCD Application Team
+ * @brief Header file of COMP LL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_LL_COMP_H
+#define __STM32F0xx_LL_COMP_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx.h"
+
+/** @addtogroup STM32F0xx_LL_Driver
+ * @{
+ */
+
+#if defined (COMP1) || defined (COMP2)
+
+/** @defgroup COMP_LL COMP
+ * @{
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup COMP_LL_Private_Constants COMP Private Constants
+ * @{
+ */
+
+/* Differentiation between COMP instances */
+/* Note: Value not corresponding to a register offset since both */
+/* COMP instances are sharing the same register) . */
+#define COMPX_BASE COMP_BASE
+#define COMPX (COMP1 - COMP2)
+
+/* COMP registers bits positions */
+#define LL_COMP_OUTPUT_LEVEL_BITOFFSET_POS ((uint32_t)14U) /* Value equivalent to POSITION_VAL(COMP_CSR_COMP1OUT) */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup COMP_LL_Private_Macros COMP Private Macros
+ * @{
+ */
+
+/**
+ * @brief Driver macro reserved for internal use: if COMP instance selected
+ * is odd (COMP1, COMP3, ...), return value '1', else return '0'.
+ * @param __COMP_INSTANCE__ COMP instance
+ * @retval If COMP instance is odd, value '1'. Else, value '0'.
+*/
+#define __COMP_IS_INSTANCE_ODD(__COMP_INSTANCE__) \
+ ((~(((uint32_t)(__COMP_INSTANCE__) - COMP_BASE) >> 1U)) & 0x00000001)
+
+/**
+ * @brief Driver macro reserved for internal use: if COMP instance selected
+ * is even (COMP2, COMP4, ...), return value '1', else return '0'.
+ * @param __COMP_INSTANCE__ COMP instance
+ * @retval If COMP instance is even, value '1'. Else, value '0'.
+*/
+#define __COMP_IS_INSTANCE_EVEN(__COMP_INSTANCE__) \
+ (((uint32_t)(__COMP_INSTANCE__) - COMP_BASE) >> 1U)
+
+/**
+ * @brief Driver macro reserved for internal use: from COMP instance
+ * selected, set offset of bits into COMP register.
+ * @note Since both COMP instances are sharing the same register
+ * with 2 area of bits with an offset of 16 bits, this function
+ * returns value "0" if COMP1 is selected and "16" if COMP2 is
+ * selected.
+ * @param __COMP_INSTANCE__ COMP instance
+ * @retval Bits offset in register 32 bits
+*/
+#define __COMP_BITOFFSET_INSTANCE(__COMP_INSTANCE__) \
+ (((uint32_t)(__COMP_INSTANCE__) - COMP_BASE) << 3U)
+
+/**
+ * @}
+ */
+
+/* Exported types ------------------------------------------------------------*/
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup COMP_LL_ES_INIT COMP Exported Init structure
+ * @{
+ */
+
+/**
+ * @brief Structure definition of some features of COMP instance.
+ */
+typedef struct
+{
+ uint32_t PowerMode; /*!< Set comparator operating mode to adjust power and speed.
+ This parameter can be a value of @ref COMP_LL_EC_POWERMODE
+
+ This feature can be modified afterwards using unitary function @ref LL_COMP_SetPowerMode(). */
+
+ uint32_t InputPlus; /*!< Set comparator input plus (non-inverting input).
+ This parameter can be a value of @ref COMP_LL_EC_INPUT_PLUS
+
+ This feature can be modified afterwards using unitary function @ref LL_COMP_SetInputPlus(). */
+
+ uint32_t InputMinus; /*!< Set comparator input minus (inverting input).
+ This parameter can be a value of @ref COMP_LL_EC_INPUT_MINUS
+
+ This feature can be modified afterwards using unitary function @ref LL_COMP_SetInputMinus(). */
+
+ uint32_t InputHysteresis; /*!< Set comparator hysteresis mode of the input minus.
+ This parameter can be a value of @ref COMP_LL_EC_INPUT_HYSTERESIS
+
+ This feature can be modified afterwards using unitary function @ref LL_COMP_SetInputHysteresis(). */
+
+ uint32_t OutputSelection; /*!< Set comparator output selection.
+ This parameter can be a value of @ref COMP_LL_EC_OUTPUT_SELECTION
+
+ This feature can be modified afterwards using unitary function @ref LL_COMP_SetOutputSelection(). */
+
+ uint32_t OutputPolarity; /*!< Set comparator output polarity.
+ This parameter can be a value of @ref COMP_LL_EC_OUTPUT_POLARITY
+
+ This feature can be modified afterwards using unitary function @ref LL_COMP_SetOutputPolarity(). */
+
+} LL_COMP_InitTypeDef;
+
+/**
+ * @}
+ */
+#endif /* USE_FULL_LL_DRIVER */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup COMP_LL_Exported_Constants COMP Exported Constants
+ * @{
+ */
+
+/** @defgroup COMP_LL_EC_COMMON_WINDOWMODE Comparator common modes - Window mode
+ * @{
+ */
+#define LL_COMP_WINDOWMODE_DISABLE ((uint32_t)0x00000000U) /*!< Window mode disable: Comparators 1 and 2 are independent */
+#define LL_COMP_WINDOWMODE_COMP1_INPUT_PLUS_COMMON (COMP_CSR_WNDWEN) /*!< Window mode enable: Comparators instances pair COMP1 and COMP2 have their input plus connected together. The common input is COMP1 input plus (COMP2 input plus is no more accessible). */
+/**
+ * @}
+ */
+
+/** @defgroup COMP_LL_EC_POWERMODE Comparator modes - Power mode
+ * @{
+ */
+#define LL_COMP_POWERMODE_HIGHSPEED ((uint32_t)0x00000000U) /*!< COMP power mode to high speed */
+#define LL_COMP_POWERMODE_MEDIUMSPEED (COMP_CSR_COMP1MODE_0) /*!< COMP power mode to medium speed */
+#define LL_COMP_POWERMODE_LOWPOWER (COMP_CSR_COMP1MODE_1) /*!< COMP power mode to low power */
+#define LL_COMP_POWERMODE_ULTRALOWPOWER (COMP_CSR_COMP1MODE_1 | COMP_CSR_COMP1MODE_0) /*!< COMP power mode to ultra-low power */
+/**
+ * @}
+ */
+
+/** @defgroup COMP_LL_EC_INPUT_PLUS Comparator inputs - Input plus (input non-inverting) selection
+ * @{
+ */
+#define LL_COMP_INPUT_PLUS_IO1 ((uint32_t)0x00000000U) /*!< Comparator input plus connected to IO1 (pin PA1 for COMP1, pin PA3 for COMP2) */
+#define LL_COMP_INPUT_PLUS_DAC1_CH1 (COMP_CSR_COMP1SW1) /*!< Comparator input plus connected to DAC1 channel 1 (DAC_OUT1), through dedicated switch (Note: this switch is solely intended to redirect signals onto high impedance input, such as COMP1 input plus (highly resistive switch)) (specific to COMP instance: COMP1) */
+/**
+ * @}
+ */
+
+/** @defgroup COMP_LL_EC_INPUT_MINUS Comparator inputs - Input minus (input inverting) selection
+ * @{
+ */
+#define LL_COMP_INPUT_MINUS_1_4VREFINT ((uint32_t)0x00000000U) /*!< Comparator input minus connected to 1/4 VrefInt */
+#define LL_COMP_INPUT_MINUS_1_2VREFINT ( COMP_CSR_COMP1INSEL_0) /*!< Comparator input minus connected to 1/2 VrefInt */
+#define LL_COMP_INPUT_MINUS_3_4VREFINT ( COMP_CSR_COMP1INSEL_1 ) /*!< Comparator input minus connected to 3/4 VrefInt */
+#define LL_COMP_INPUT_MINUS_VREFINT ( COMP_CSR_COMP1INSEL_1 | COMP_CSR_COMP1INSEL_0) /*!< Comparator input minus connected to VrefInt */
+#define LL_COMP_INPUT_MINUS_DAC1_CH1 (COMP_CSR_COMP1INSEL_2 ) /*!< Comparator input minus connected to DAC1 channel 1 (DAC_OUT1) */
+#define LL_COMP_INPUT_MINUS_DAC1_CH2 (COMP_CSR_COMP1INSEL_2 | COMP_CSR_COMP1INSEL_0) /*!< Comparator input minus connected to DAC1 channel 2 (DAC_OUT2) */
+#define LL_COMP_INPUT_MINUS_IO1 (COMP_CSR_COMP1INSEL_2 | COMP_CSR_COMP1INSEL_1 ) /*!< Comparator input minus connected to IO1 (pin PA0 for COMP1, pin PA2 for COMP2) */
+/**
+ * @}
+ */
+
+/** @defgroup COMP_LL_EC_INPUT_HYSTERESIS Comparator input - Hysteresis
+ * @{
+ */
+#define LL_COMP_HYSTERESIS_NONE ((uint32_t)0x00000000U) /*!< No hysteresis */
+#define LL_COMP_HYSTERESIS_LOW ( COMP_CSR_COMP1HYST_0) /*!< Hysteresis level low */
+#define LL_COMP_HYSTERESIS_MEDIUM (COMP_CSR_COMP1HYST_1 ) /*!< Hysteresis level medium */
+#define LL_COMP_HYSTERESIS_HIGH (COMP_CSR_COMP1HYST_1 | COMP_CSR_COMP1HYST_0) /*!< Hysteresis level high */
+/**
+ * @}
+ */
+
+/** @defgroup COMP_LL_EC_OUTPUT_SELECTION Comparator output - Output selection
+ * @{
+ */
+/* Note: Output redirection is common for COMP1 and COMP2 */
+#define LL_COMP_OUTPUT_NONE ((uint32_t)0x00000000U) /*!< COMP output is not connected to other peripherals (except GPIO and EXTI that are always connected to COMP output) */
+#define LL_COMP_OUTPUT_TIM1_BKIN (COMP_CSR_COMP1OUTSEL_0) /*!< COMP output connected to TIM1 break input (BKIN) */
+#define LL_COMP_OUTPUT_TIM1_IC1 (COMP_CSR_COMP1OUTSEL_1) /*!< COMP output connected to TIM1 input capture 1 */
+#define LL_COMP_OUTPUT_TIM1_OCCLR (COMP_CSR_COMP1OUTSEL_1 | COMP_CSR_COMP1OUTSEL_0) /*!< COMP output connected to TIM1 OCREF clear */
+#define LL_COMP_OUTPUT_TIM2_IC4 (COMP_CSR_COMP1OUTSEL_2) /*!< COMP output connected to TIM2 input capture 4 */
+#define LL_COMP_OUTPUT_TIM2_OCCLR (COMP_CSR_COMP1OUTSEL_2 | COMP_CSR_COMP1OUTSEL_0) /*!< COMP output connected to TIM2 OCREF clear */
+#define LL_COMP_OUTPUT_TIM3_IC1 (COMP_CSR_COMP1OUTSEL_2 | COMP_CSR_COMP1OUTSEL_1) /*!< COMP output connected to TIM3 input capture 1 */
+#define LL_COMP_OUTPUT_TIM3_OCCLR (COMP_CSR_COMP1OUTSEL_2 | COMP_CSR_COMP1OUTSEL_1 | COMP_CSR_COMP1OUTSEL_0) /*!< COMP output connected to TIM3 OCREF clear */
+/**
+ * @}
+ */
+
+/** @defgroup COMP_LL_EC_OUTPUT_POLARITY Comparator output - Output polarity
+ * @{
+ */
+#define LL_COMP_OUTPUTPOL_NONINVERTED ((uint32_t)0x00000000U) /*!< COMP output polarity is not inverted: comparator output is high when the plus (non-inverting) input is at a higher voltage than the minus (inverting) input */
+#define LL_COMP_OUTPUTPOL_INVERTED (COMP_CSR_COMP1POL) /*!< COMP output polarity is inverted: comparator output is low when the plus (non-inverting) input is at a lower voltage than the minus (inverting) input */
+/**
+ * @}
+ */
+
+/** @defgroup COMP_LL_EC_OUTPUT_LEVEL Comparator output - Output level
+ * @{
+ */
+#define LL_COMP_OUTPUT_LEVEL_LOW ((uint32_t)0x00000000U) /*!< Comparator output level low (if the polarity is not inverted, otherwise to be complemented) */
+#define LL_COMP_OUTPUT_LEVEL_HIGH ((uint32_t)0x00000001U) /*!< Comparator output level high (if the polarity is not inverted, otherwise to be complemented) */
+/**
+ * @}
+ */
+
+/** @defgroup COMP_LL_EC_HW_DELAYS Definitions of COMP hardware constraints delays
+ * @note Only COMP IP HW delays are defined in COMP LL driver driver,
+ * not timeout values.
+ * For details on delays values, refer to descriptions in source code
+ * above each literal definition.
+ * @{
+ */
+
+/* Delay for comparator startup time. */
+/* Note: Delay required to reach propagation delay specification. */
+/* Literal set to maximum value (refer to device datasheet, */
+/* parameter "tSTART"). */
+/* Unit: us */
+#define LL_COMP_DELAY_STARTUP_US ((uint32_t) 60U) /*!< Delay for COMP startup time */
+
+/* Delay for comparator voltage scaler stabilization time */
+/* (voltage from VrefInt, delay based on VrefInt startup time). */
+/* Literal set to maximum value (refer to device datasheet, */
+/* parameter "tS_SC"). */
+/* Unit: us */
+#define LL_COMP_DELAY_VOLTAGE_SCALER_STAB_US ((uint32_t) 200U) /*!< Delay for COMP voltage scaler stabilization time */
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup COMP_LL_Exported_Macros COMP Exported Macros
+ * @{
+ */
+/** @defgroup COMP_LL_EM_WRITE_READ Common write and read registers macro
+ * @{
+ */
+
+/**
+ * @brief Write a value in COMP register
+ * @param __INSTANCE__ comparator instance
+ * @param __REG__ Register to be written
+ * @param __VALUE__ Value to be written in the register
+ * @retval None
+ */
+#define LL_COMP_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__))
+
+/**
+ * @brief Read a value in COMP register
+ * @param __INSTANCE__ comparator instance
+ * @param __REG__ Register to be read
+ * @retval Register value
+ */
+#define LL_COMP_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__)
+/**
+ * @}
+ */
+
+/** @defgroup COMP_LL_EM_HELPER_MACRO COMP helper macro
+ * @{
+ */
+
+/**
+ * @brief Helper macro to select the COMP common instance
+ * to which is belonging the selected COMP instance.
+ * @note COMP common register instance can be used to
+ * set parameters common to several COMP instances.
+ * Refer to functions having argument "COMPxy_COMMON" as parameter.
+ * @param __COMPx__ COMP instance
+ * @retval COMP common instance or value "0" if there is no COMP common instance.
+ */
+#define __LL_COMP_COMMON_INSTANCE(__COMPx__) \
+ (COMP12_COMMON)
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup COMP_LL_Exported_Functions COMP Exported Functions
+ * @{
+ */
+
+/** @defgroup COMP_LL_EF_Configuration_comparator_common Configuration of COMP hierarchical scope: common to several COMP instances
+ * @{
+ */
+
+/**
+ * @brief Set window mode of a pair of comparators instances
+ * (2 consecutive COMP instances odd and even COMP<x> and COMP<x+1>).
+ * @rmtoll CSR WNDWEN LL_COMP_SetCommonWindowMode
+ * @param COMPxy_COMMON Comparator common instance
+ * (can be set directly from CMSIS definition or by using helper macro @ref __LL_COMP_COMMON_INSTANCE() )
+ * @param WindowMode This parameter can be one of the following values:
+ * @arg @ref LL_COMP_WINDOWMODE_DISABLE
+ * @arg @ref LL_COMP_WINDOWMODE_COMP1_INPUT_PLUS_COMMON
+ * @retval None
+ */
+__STATIC_INLINE void LL_COMP_SetCommonWindowMode(COMP_Common_TypeDef *COMPxy_COMMON, uint32_t WindowMode)
+{
+ MODIFY_REG(COMPxy_COMMON->CSR, COMP_CSR_WNDWEN, WindowMode);
+}
+
+/**
+ * @brief Get window mode of a pair of comparators instances
+ * (2 consecutive COMP instances odd and even COMP<x> and COMP<x+1>).
+ * @rmtoll CSR WNDWEN LL_COMP_GetCommonWindowMode
+ * @param COMPxy_COMMON Comparator common instance
+ * (can be set directly from CMSIS definition or by using helper macro @ref __LL_COMP_COMMON_INSTANCE() )
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_COMP_WINDOWMODE_DISABLE
+ * @arg @ref LL_COMP_WINDOWMODE_COMP1_INPUT_PLUS_COMMON
+ */
+__STATIC_INLINE uint32_t LL_COMP_GetCommonWindowMode(COMP_Common_TypeDef *COMPxy_COMMON)
+{
+ return (uint32_t)(READ_BIT(COMPxy_COMMON->CSR, COMP_CSR_WNDWEN));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup COMP_LL_EF_Configuration_comparator_modes Configuration of comparator modes
+ * @{
+ */
+
+/**
+ * @brief Set comparator instance operating mode to adjust power and speed.
+ * @rmtoll CSR COMP1MODE LL_COMP_SetPowerMode\n
+ * COMP2MODE LL_COMP_SetPowerMode
+ * @param COMPx Comparator instance
+ * @param PowerMode This parameter can be one of the following values:
+ * @arg @ref LL_COMP_POWERMODE_HIGHSPEED
+ * @arg @ref LL_COMP_POWERMODE_MEDIUMSPEED
+ * @arg @ref LL_COMP_POWERMODE_LOWPOWER
+ * @arg @ref LL_COMP_POWERMODE_ULTRALOWPOWER
+ * @retval None
+ */
+__STATIC_INLINE void LL_COMP_SetPowerMode(COMP_TypeDef *COMPx, uint32_t PowerMode)
+{
+ MODIFY_REG(COMP->CSR,
+ COMP_CSR_COMP1MODE << __COMP_BITOFFSET_INSTANCE(COMPx),
+ PowerMode << __COMP_BITOFFSET_INSTANCE(COMPx) );
+}
+
+/**
+ * @brief Get comparator instance operating mode to adjust power and speed.
+ * @rmtoll CSR COMP1MODE LL_COMP_GetPowerMode\n
+ * COMP2MODE LL_COMP_GetPowerMode
+ * @param COMPx Comparator instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_COMP_POWERMODE_HIGHSPEED
+ * @arg @ref LL_COMP_POWERMODE_MEDIUMSPEED
+ * @arg @ref LL_COMP_POWERMODE_LOWPOWER
+ * @arg @ref LL_COMP_POWERMODE_ULTRALOWPOWER
+ */
+__STATIC_INLINE uint32_t LL_COMP_GetPowerMode(COMP_TypeDef *COMPx)
+{
+ return (uint32_t)(READ_BIT(COMP->CSR,
+ COMP_CSR_COMP1MODE << __COMP_BITOFFSET_INSTANCE(COMPx))
+ >> __COMP_BITOFFSET_INSTANCE(COMPx)
+ );
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup COMP_LL_EF_Configuration_comparator_inputs Configuration of comparator inputs
+ * @{
+ */
+
+/**
+ * @brief Set comparator inputs minus (inverting) and plus (non-inverting).
+ * @note In case of comparator input selected to be connected to IO:
+ * GPIO pins are specific to each comparator instance.
+ * Refer to description of parameters or to reference manual.
+ * @rmtoll CSR COMP1INSEL LL_COMP_ConfigInputs\n
+ * CSR COMP2INSEL LL_COMP_ConfigInputs\n
+ * CSR COMP1SW1 LL_COMP_ConfigInputs
+ * @param COMPx Comparator instance
+ * @param InputMinus This parameter can be one of the following values:
+ * @arg @ref LL_COMP_INPUT_MINUS_1_4VREFINT
+ * @arg @ref LL_COMP_INPUT_MINUS_1_2VREFINT
+ * @arg @ref LL_COMP_INPUT_MINUS_3_4VREFINT
+ * @arg @ref LL_COMP_INPUT_MINUS_VREFINT
+ * @arg @ref LL_COMP_INPUT_MINUS_DAC1_CH1
+ * @arg @ref LL_COMP_INPUT_MINUS_DAC1_CH2
+ * @arg @ref LL_COMP_INPUT_MINUS_IO1
+ * @param InputPlus This parameter can be one of the following values:
+ * @arg @ref LL_COMP_INPUT_PLUS_IO1
+ * @arg @ref LL_COMP_INPUT_PLUS_DAC1_CH1 (1)
+ *
+ * (1) Parameter available only on COMP instance: COMP1.
+ * @retval None
+ */
+__STATIC_INLINE void LL_COMP_ConfigInputs(COMP_TypeDef *COMPx, uint32_t InputMinus, uint32_t InputPlus)
+{
+ /* Note: Connection switch is applicable only to COMP instance COMP1, */
+ /* therefore if COMP2 is selected the equivalent bit is */
+ /* kept unmodified. */
+ MODIFY_REG(COMP->CSR,
+ (COMP_CSR_COMP1INSEL | (COMP_CSR_COMP1SW1 * __COMP_IS_INSTANCE_ODD(COMPx))) << __COMP_BITOFFSET_INSTANCE(COMPx),
+ (InputMinus | InputPlus) << __COMP_BITOFFSET_INSTANCE(COMPx) );
+}
+
+/**
+ * @brief Set comparator input plus (non-inverting).
+ * @note In case of comparator input selected to be connected to IO:
+ * GPIO pins are specific to each comparator instance.
+ * Refer to description of parameters or to reference manual.
+ * @rmtoll CSR COMP1INSEL LL_COMP_SetInputPlus\n
+ * CSR COMP2INSEL LL_COMP_SetInputPlus
+ * @param COMPx Comparator instance
+ * @param InputPlus This parameter can be one of the following values:
+ * @arg @ref LL_COMP_INPUT_PLUS_IO1
+ * @arg @ref LL_COMP_INPUT_PLUS_DAC1_CH1 (1)
+ *
+ * (1) Parameter available only on COMP instance: COMP1.
+ * @retval None
+ */
+__STATIC_INLINE void LL_COMP_SetInputPlus(COMP_TypeDef *COMPx, uint32_t InputPlus)
+{
+ /* Note: Connection switch is applicable only to COMP instance COMP1, */
+ /* therefore if COMP2 is selected the equivalent bit is */
+ /* kept unmodified. */
+ MODIFY_REG(COMP->CSR,
+ (COMP_CSR_COMP1SW1 * __COMP_IS_INSTANCE_ODD(COMPx)) << __COMP_BITOFFSET_INSTANCE(COMPx),
+ InputPlus << __COMP_BITOFFSET_INSTANCE(COMPx) );
+}
+
+/**
+ * @brief Get comparator input plus (non-inverting).
+ * @note In case of comparator input selected to be connected to IO:
+ * GPIO pins are specific to each comparator instance.
+ * Refer to description of parameters or to reference manual.
+ * @rmtoll CSR COMP1INSEL LL_COMP_GetInputPlus\n
+ * CSR COMP2INSEL LL_COMP_GetInputPlus
+ * @param COMPx Comparator instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_COMP_INPUT_PLUS_IO1
+ * @arg @ref LL_COMP_INPUT_PLUS_DAC1_CH1 (1)
+ *
+ * (1) Parameter available only on COMP instance: COMP1.
+ */
+__STATIC_INLINE uint32_t LL_COMP_GetInputPlus(COMP_TypeDef *COMPx)
+{
+ /* Note: Connection switch is applicable only to COMP instance COMP1, */
+ /* therefore is COMP2 is selected the returned value will be null. */
+ return (uint32_t)(READ_BIT(COMP->CSR,
+ COMP_CSR_COMP1SW1 << __COMP_BITOFFSET_INSTANCE(COMPx))
+ >> __COMP_BITOFFSET_INSTANCE(COMPx)
+ );
+}
+
+/**
+ * @brief Set comparator input minus (inverting).
+ * @note In case of comparator input selected to be connected to IO:
+ * GPIO pins are specific to each comparator instance.
+ * Refer to description of parameters or to reference manual.
+ * @rmtoll CSR COMP1SW1 LL_COMP_SetInputMinus
+ * @param COMPx Comparator instance
+ * @param InputMinus This parameter can be one of the following values:
+ * @arg @ref LL_COMP_INPUT_MINUS_1_4VREFINT
+ * @arg @ref LL_COMP_INPUT_MINUS_1_2VREFINT
+ * @arg @ref LL_COMP_INPUT_MINUS_3_4VREFINT
+ * @arg @ref LL_COMP_INPUT_MINUS_VREFINT
+ * @arg @ref LL_COMP_INPUT_MINUS_DAC1_CH1
+ * @arg @ref LL_COMP_INPUT_MINUS_DAC1_CH2
+ * @arg @ref LL_COMP_INPUT_MINUS_IO1
+ * @retval None
+ */
+__STATIC_INLINE void LL_COMP_SetInputMinus(COMP_TypeDef *COMPx, uint32_t InputMinus)
+{
+ MODIFY_REG(COMP->CSR,
+ COMP_CSR_COMP1INSEL << __COMP_BITOFFSET_INSTANCE(COMPx),
+ InputMinus << __COMP_BITOFFSET_INSTANCE(COMPx) );
+}
+
+/**
+ * @brief Get comparator input minus (inverting).
+ * @note In case of comparator input selected to be connected to IO:
+ * GPIO pins are specific to each comparator instance.
+ * Refer to description of parameters or to reference manual.
+ * @rmtoll CSR COMP1SW1 LL_COMP_GetInputMinus
+ * @param COMPx Comparator instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_COMP_INPUT_MINUS_1_4VREFINT
+ * @arg @ref LL_COMP_INPUT_MINUS_1_2VREFINT
+ * @arg @ref LL_COMP_INPUT_MINUS_3_4VREFINT
+ * @arg @ref LL_COMP_INPUT_MINUS_VREFINT
+ * @arg @ref LL_COMP_INPUT_MINUS_DAC1_CH1
+ * @arg @ref LL_COMP_INPUT_MINUS_DAC1_CH2
+ * @arg @ref LL_COMP_INPUT_MINUS_IO1
+ */
+__STATIC_INLINE uint32_t LL_COMP_GetInputMinus(COMP_TypeDef *COMPx)
+{
+ return (uint32_t)(READ_BIT(COMP->CSR,
+ COMP_CSR_COMP1INSEL << __COMP_BITOFFSET_INSTANCE(COMPx))
+ >> __COMP_BITOFFSET_INSTANCE(COMPx)
+ );
+}
+
+/**
+ * @brief Set comparator instance hysteresis mode of the input minus (inverting input).
+ * @rmtoll CSR COMP1HYST LL_COMP_SetInputHysteresis\n
+ * COMP2HYST LL_COMP_SetInputHysteresis
+ * @param COMPx Comparator instance
+ * @param InputHysteresis This parameter can be one of the following values:
+ * @arg @ref LL_COMP_HYSTERESIS_NONE
+ * @arg @ref LL_COMP_HYSTERESIS_LOW
+ * @arg @ref LL_COMP_HYSTERESIS_MEDIUM
+ * @arg @ref LL_COMP_HYSTERESIS_HIGH
+ * @retval None
+ */
+__STATIC_INLINE void LL_COMP_SetInputHysteresis(COMP_TypeDef *COMPx, uint32_t InputHysteresis)
+{
+ MODIFY_REG(COMP->CSR,
+ COMP_CSR_COMP1HYST << __COMP_BITOFFSET_INSTANCE(COMPx),
+ InputHysteresis << __COMP_BITOFFSET_INSTANCE(COMPx) );
+}
+
+/**
+ * @brief Get comparator instance hysteresis mode of the minus (inverting) input.
+ * @rmtoll CSR COMP1HYST LL_COMP_GetInputHysteresis\n
+ * COMP2HYST LL_COMP_GetInputHysteresis
+ * @param COMPx Comparator instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_COMP_HYSTERESIS_NONE
+ * @arg @ref LL_COMP_HYSTERESIS_LOW
+ * @arg @ref LL_COMP_HYSTERESIS_MEDIUM
+ * @arg @ref LL_COMP_HYSTERESIS_HIGH
+ */
+__STATIC_INLINE uint32_t LL_COMP_GetInputHysteresis(COMP_TypeDef *COMPx)
+{
+ return (uint32_t)(READ_BIT(COMP->CSR,
+ COMP_CSR_COMP1HYST << __COMP_BITOFFSET_INSTANCE(COMPx))
+ >> __COMP_BITOFFSET_INSTANCE(COMPx)
+ );
+
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup COMP_LL_EF_Configuration_comparator_output Configuration of comparator output
+ * @{
+ */
+
+/**
+ * @brief Set comparator output selection.
+ * @note Availability of parameters of output selection to timer
+ * depends on timers availability on the selected device.
+ * @rmtoll CSR COMP1OUTSEL LL_COMP_SetOutputSelection\n
+ * COMP2OUTSEL LL_COMP_SetOutputSelection
+ * @param COMPx Comparator instance
+ * @param OutputSelection This parameter can be one of the following values:
+ * @arg @ref LL_COMP_OUTPUT_NONE
+ * @arg @ref LL_COMP_OUTPUT_TIM1_BKIN (1)
+ * @arg @ref LL_COMP_OUTPUT_TIM1_IC1 (1)
+ * @arg @ref LL_COMP_OUTPUT_TIM1_OCCLR (1)
+ * @arg @ref LL_COMP_OUTPUT_TIM2_IC4 (1)
+ * @arg @ref LL_COMP_OUTPUT_TIM2_OCCLR (1)
+ * @arg @ref LL_COMP_OUTPUT_TIM3_IC1 (1)
+ * @arg @ref LL_COMP_OUTPUT_TIM3_OCCLR (1)
+ *
+ * (1) Parameter availability depending on timer availability
+ * on the selected device.
+ * @retval None
+ */
+__STATIC_INLINE void LL_COMP_SetOutputSelection(COMP_TypeDef *COMPx, uint32_t OutputSelection)
+{
+ MODIFY_REG(COMP->CSR,
+ COMP_CSR_COMP1OUTSEL << __COMP_BITOFFSET_INSTANCE(COMPx),
+ OutputSelection << __COMP_BITOFFSET_INSTANCE(COMPx) );
+}
+
+/**
+ * @brief Get comparator output selection.
+ * @note Availability of parameters of output selection to timer
+ * depends on timers availability on the selected device.
+ * @rmtoll CSR COMP1OUTSEL LL_COMP_GetOutputSelection\n
+ * COMP2OUTSEL LL_COMP_GetOutputSelection
+ * @param COMPx Comparator instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_COMP_OUTPUT_NONE
+ * @arg @ref LL_COMP_OUTPUT_TIM1_BKIN (1)
+ * @arg @ref LL_COMP_OUTPUT_TIM1_IC1 (1)
+ * @arg @ref LL_COMP_OUTPUT_TIM1_OCCLR (1)
+ * @arg @ref LL_COMP_OUTPUT_TIM2_IC4 (1)
+ * @arg @ref LL_COMP_OUTPUT_TIM2_OCCLR (1)
+ * @arg @ref LL_COMP_OUTPUT_TIM3_IC1 (1)
+ * @arg @ref LL_COMP_OUTPUT_TIM3_OCCLR (1)
+ *
+ * (1) Parameter availability depending on timer availability
+ * on the selected device.
+ */
+__STATIC_INLINE uint32_t LL_COMP_GetOutputSelection(COMP_TypeDef *COMPx)
+{
+ return (uint32_t)(READ_BIT(COMP->CSR,
+ COMP_CSR_COMP1OUTSEL << __COMP_BITOFFSET_INSTANCE(COMPx))
+ >> __COMP_BITOFFSET_INSTANCE(COMPx)
+ );
+}
+
+/**
+ * @brief Set comparator instance output polarity.
+ * @rmtoll CSR COMP1POL LL_COMP_SetOutputPolarity\n
+ * COMP2POL LL_COMP_SetOutputPolarity
+ * @param COMPx Comparator instance
+ * @param OutputPolarity This parameter can be one of the following values:
+ * @arg @ref LL_COMP_OUTPUTPOL_NONINVERTED
+ * @arg @ref LL_COMP_OUTPUTPOL_INVERTED
+ * @retval None
+ */
+__STATIC_INLINE void LL_COMP_SetOutputPolarity(COMP_TypeDef *COMPx, uint32_t OutputPolarity)
+{
+ MODIFY_REG(COMP->CSR,
+ COMP_CSR_COMP1POL << __COMP_BITOFFSET_INSTANCE(COMPx),
+ OutputPolarity << __COMP_BITOFFSET_INSTANCE(COMPx) );
+}
+
+/**
+ * @brief Get comparator instance output polarity.
+ * @rmtoll CSR COMP1POL LL_COMP_GetOutputPolarity\n
+ * COMP2POL LL_COMP_GetOutputPolarity
+ * @param COMPx Comparator instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_COMP_OUTPUTPOL_NONINVERTED
+ * @arg @ref LL_COMP_OUTPUTPOL_INVERTED
+ */
+__STATIC_INLINE uint32_t LL_COMP_GetOutputPolarity(COMP_TypeDef *COMPx)
+{
+ return (uint32_t)(READ_BIT(COMP->CSR,
+ COMP_CSR_COMP1POL << __COMP_BITOFFSET_INSTANCE(COMPx))
+ >> __COMP_BITOFFSET_INSTANCE(COMPx)
+ );
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup COMP_LL_EF_Operation Operation on comparator instance
+ * @{
+ */
+
+/**
+ * @brief Enable comparator instance.
+ * @note After enable from off state, comparator requires a delay
+ * to reach reach propagation delay specification.
+ * Refer to device datasheet, parameter "tSTART".
+ * @rmtoll CSR COMP1EN LL_COMP_Enable\n
+ * CSR COMP2EN LL_COMP_Enable
+ * @param COMPx Comparator instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_COMP_Enable(COMP_TypeDef *COMPx)
+{
+ SET_BIT(COMP->CSR, COMP_CSR_COMP1EN << __COMP_BITOFFSET_INSTANCE(COMPx));
+}
+
+/**
+ * @brief Disable comparator instance.
+ * @rmtoll CSR COMP1EN LL_COMP_Disable\n
+ * CSR COMP2EN LL_COMP_Disable
+ * @param COMPx Comparator instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_COMP_Disable(COMP_TypeDef *COMPx)
+{
+ CLEAR_BIT(COMP->CSR, COMP_CSR_COMP1EN << __COMP_BITOFFSET_INSTANCE(COMPx));
+}
+
+/**
+ * @brief Get comparator enable state
+ * (0: COMP is disabled, 1: COMP is enabled)
+ * @rmtoll CSR COMP1EN LL_COMP_IsEnabled\n
+ * CSR COMP2EN LL_COMP_IsEnabled
+ * @param COMPx Comparator instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_COMP_IsEnabled(COMP_TypeDef *COMPx)
+{
+ return (READ_BIT(COMP->CSR, COMP_CSR_COMP1EN << __COMP_BITOFFSET_INSTANCE(COMPx)) == COMP_CSR_COMP1EN << __COMP_BITOFFSET_INSTANCE(COMPx));
+}
+
+/**
+ * @brief Lock comparator instance.
+ * @note Once locked, comparator configuration can be accessed in read-only.
+ * @note The only way to unlock the comparator is a device hardware reset.
+ * @rmtoll CSR COMP1LOCK LL_COMP_Lock\n
+ * CSR COMP2LOCK LL_COMP_Lock
+ * @param COMPx Comparator instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_COMP_Lock(COMP_TypeDef *COMPx)
+{
+ SET_BIT(COMP->CSR, COMP_CSR_COMP1LOCK << __COMP_BITOFFSET_INSTANCE(COMPx));
+}
+
+/**
+ * @brief Get comparator lock state
+ * (0: COMP is unlocked, 1: COMP is locked).
+ * @note Once locked, comparator configuration can be accessed in read-only.
+ * @note The only way to unlock the comparator is a device hardware reset.
+ * @rmtoll CSR COMP1LOCK LL_COMP_IsLocked\n
+ * CSR COMP2LOCK LL_COMP_IsLocked
+ * @param COMPx Comparator instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_COMP_IsLocked(COMP_TypeDef *COMPx)
+{
+ return (READ_BIT(COMP->CSR, COMP_CSR_COMP1LOCK << __COMP_BITOFFSET_INSTANCE(COMPx)) == COMP_CSR_COMP1LOCK << __COMP_BITOFFSET_INSTANCE(COMPx));
+}
+
+/**
+ * @brief Read comparator instance output level.
+ * @note The comparator output level depends on the selected polarity
+ * (Refer to function @ref LL_COMP_SetOutputPolarity()).
+ * If the comparator polarity is not inverted:
+ * - Comparator output is low when the input plus
+ * is at a lower voltage than the input minus
+ * - Comparator output is high when the input plus
+ * is at a higher voltage than the input minus
+ * If the comparator polarity is inverted:
+ * - Comparator output is high when the input plus
+ * is at a lower voltage than the input minus
+ * - Comparator output is low when the input plus
+ * is at a higher voltage than the input minus
+ * @rmtoll CSR COMP1OUT LL_COMP_ReadOutputLevel\n
+ * CSR COMP2OUT LL_COMP_ReadOutputLevel
+ * @param COMPx Comparator instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_COMP_OUTPUT_LEVEL_LOW
+ * @arg @ref LL_COMP_OUTPUT_LEVEL_HIGH
+ */
+__STATIC_INLINE uint32_t LL_COMP_ReadOutputLevel(COMP_TypeDef *COMPx)
+{
+ return (uint32_t)(READ_BIT(COMP->CSR,
+ COMP_CSR_COMP1OUT << __COMP_BITOFFSET_INSTANCE(COMPx))
+ >> (__COMP_BITOFFSET_INSTANCE(COMPx) + LL_COMP_OUTPUT_LEVEL_BITOFFSET_POS)
+ );
+}
+
+/**
+ * @}
+ */
+
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup COMP_LL_EF_Init Initialization and de-initialization functions
+ * @{
+ */
+
+ErrorStatus LL_COMP_DeInit(COMP_TypeDef *COMPx);
+ErrorStatus LL_COMP_Init(COMP_TypeDef *COMPx, LL_COMP_InitTypeDef *COMP_InitStruct);
+void LL_COMP_StructInit(LL_COMP_InitTypeDef *COMP_InitStruct);
+
+/**
+ * @}
+ */
+#endif /* USE_FULL_LL_DRIVER */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* COMP1 || COMP2 */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_LL_COMP_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_cortex.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_cortex.h
new file mode 100644
index 0000000..501ca0d
--- /dev/null
+++ b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_cortex.h
@@ -0,0 +1,320 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_ll_cortex.h
+ * @author MCD Application Team
+ * @brief Header file of CORTEX LL module.
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ The LL CORTEX driver contains a set of generic APIs that can be
+ used by user:
+ (+) SYSTICK configuration used by @ref LL_mDelay and @ref LL_Init1msTick
+ functions
+ (+) Low power mode configuration (SCB register of Cortex-MCU)
+ (+) API to access to MCU info (CPUID register)
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_LL_CORTEX_H
+#define __STM32F0xx_LL_CORTEX_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx.h"
+
+/** @addtogroup STM32F0xx_LL_Driver
+ * @{
+ */
+
+/** @defgroup CORTEX_LL CORTEX
+ * @{
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+
+/* Private constants ---------------------------------------------------------*/
+
+/* Private macros ------------------------------------------------------------*/
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup CORTEX_LL_Exported_Constants CORTEX Exported Constants
+ * @{
+ */
+
+/** @defgroup CORTEX_LL_EC_CLKSOURCE_HCLK SYSTICK Clock Source
+ * @{
+ */
+#define LL_SYSTICK_CLKSOURCE_HCLK_DIV8 0x00000000U /*!< AHB clock divided by 8 selected as SysTick clock source.*/
+#define LL_SYSTICK_CLKSOURCE_HCLK SysTick_CTRL_CLKSOURCE_Msk /*!< AHB clock selected as SysTick clock source. */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup CORTEX_LL_Exported_Functions CORTEX Exported Functions
+ * @{
+ */
+
+/** @defgroup CORTEX_LL_EF_SYSTICK SYSTICK
+ * @{
+ */
+
+/**
+ * @brief This function checks if the Systick counter flag is active or not.
+ * @note It can be used in timeout function on application side.
+ * @rmtoll STK_CTRL COUNTFLAG LL_SYSTICK_IsActiveCounterFlag
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSTICK_IsActiveCounterFlag(void)
+{
+ return ((SysTick->CTRL & SysTick_CTRL_COUNTFLAG_Msk) == (SysTick_CTRL_COUNTFLAG_Msk));
+}
+
+/**
+ * @brief Configures the SysTick clock source
+ * @rmtoll STK_CTRL CLKSOURCE LL_SYSTICK_SetClkSource
+ * @param Source This parameter can be one of the following values:
+ * @arg @ref LL_SYSTICK_CLKSOURCE_HCLK_DIV8
+ * @arg @ref LL_SYSTICK_CLKSOURCE_HCLK
+ * @retval None
+ */
+__STATIC_INLINE void LL_SYSTICK_SetClkSource(uint32_t Source)
+{
+ if (Source == LL_SYSTICK_CLKSOURCE_HCLK)
+ {
+ SET_BIT(SysTick->CTRL, LL_SYSTICK_CLKSOURCE_HCLK);
+ }
+ else
+ {
+ CLEAR_BIT(SysTick->CTRL, LL_SYSTICK_CLKSOURCE_HCLK);
+ }
+}
+
+/**
+ * @brief Get the SysTick clock source
+ * @rmtoll STK_CTRL CLKSOURCE LL_SYSTICK_GetClkSource
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_SYSTICK_CLKSOURCE_HCLK_DIV8
+ * @arg @ref LL_SYSTICK_CLKSOURCE_HCLK
+ */
+__STATIC_INLINE uint32_t LL_SYSTICK_GetClkSource(void)
+{
+ return READ_BIT(SysTick->CTRL, LL_SYSTICK_CLKSOURCE_HCLK);
+}
+
+/**
+ * @brief Enable SysTick exception request
+ * @rmtoll STK_CTRL TICKINT LL_SYSTICK_EnableIT
+ * @retval None
+ */
+__STATIC_INLINE void LL_SYSTICK_EnableIT(void)
+{
+ SET_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk);
+}
+
+/**
+ * @brief Disable SysTick exception request
+ * @rmtoll STK_CTRL TICKINT LL_SYSTICK_DisableIT
+ * @retval None
+ */
+__STATIC_INLINE void LL_SYSTICK_DisableIT(void)
+{
+ CLEAR_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk);
+}
+
+/**
+ * @brief Checks if the SYSTICK interrupt is enabled or disabled.
+ * @rmtoll STK_CTRL TICKINT LL_SYSTICK_IsEnabledIT
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSTICK_IsEnabledIT(void)
+{
+ return (READ_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk) == (SysTick_CTRL_TICKINT_Msk));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_LL_EF_LOW_POWER_MODE LOW POWER MODE
+ * @{
+ */
+
+/**
+ * @brief Processor uses sleep as its low power mode
+ * @rmtoll SCB_SCR SLEEPDEEP LL_LPM_EnableSleep
+ * @retval None
+ */
+__STATIC_INLINE void LL_LPM_EnableSleep(void)
+{
+ /* Clear SLEEPDEEP bit of Cortex System Control Register */
+ CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
+}
+
+/**
+ * @brief Processor uses deep sleep as its low power mode
+ * @rmtoll SCB_SCR SLEEPDEEP LL_LPM_EnableDeepSleep
+ * @retval None
+ */
+__STATIC_INLINE void LL_LPM_EnableDeepSleep(void)
+{
+ /* Set SLEEPDEEP bit of Cortex System Control Register */
+ SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
+}
+
+/**
+ * @brief Configures sleep-on-exit when returning from Handler mode to Thread mode.
+ * @note Setting this bit to 1 enables an interrupt-driven application to avoid returning to an
+ * empty main application.
+ * @rmtoll SCB_SCR SLEEPONEXIT LL_LPM_EnableSleepOnExit
+ * @retval None
+ */
+__STATIC_INLINE void LL_LPM_EnableSleepOnExit(void)
+{
+ /* Set SLEEPONEXIT bit of Cortex System Control Register */
+ SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk));
+}
+
+/**
+ * @brief Do not sleep when returning to Thread mode.
+ * @rmtoll SCB_SCR SLEEPONEXIT LL_LPM_DisableSleepOnExit
+ * @retval None
+ */
+__STATIC_INLINE void LL_LPM_DisableSleepOnExit(void)
+{
+ /* Clear SLEEPONEXIT bit of Cortex System Control Register */
+ CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk));
+}
+
+/**
+ * @brief Enabled events and all interrupts, including disabled interrupts, can wakeup the
+ * processor.
+ * @rmtoll SCB_SCR SEVEONPEND LL_LPM_EnableEventOnPend
+ * @retval None
+ */
+__STATIC_INLINE void LL_LPM_EnableEventOnPend(void)
+{
+ /* Set SEVEONPEND bit of Cortex System Control Register */
+ SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk));
+}
+
+/**
+ * @brief Only enabled interrupts or events can wakeup the processor, disabled interrupts are
+ * excluded
+ * @rmtoll SCB_SCR SEVEONPEND LL_LPM_DisableEventOnPend
+ * @retval None
+ */
+__STATIC_INLINE void LL_LPM_DisableEventOnPend(void)
+{
+ /* Clear SEVEONPEND bit of Cortex System Control Register */
+ CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_LL_EF_MCU_INFO MCU INFO
+ * @{
+ */
+
+/**
+ * @brief Get Implementer code
+ * @rmtoll SCB_CPUID IMPLEMENTER LL_CPUID_GetImplementer
+ * @retval Value should be equal to 0x41 for ARM
+ */
+__STATIC_INLINE uint32_t LL_CPUID_GetImplementer(void)
+{
+ return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_IMPLEMENTER_Msk) >> SCB_CPUID_IMPLEMENTER_Pos);
+}
+
+/**
+ * @brief Get Variant number (The r value in the rnpn product revision identifier)
+ * @rmtoll SCB_CPUID VARIANT LL_CPUID_GetVariant
+ * @retval Value between 0 and 255 (0x0: revision 0)
+ */
+__STATIC_INLINE uint32_t LL_CPUID_GetVariant(void)
+{
+ return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_VARIANT_Msk) >> SCB_CPUID_VARIANT_Pos);
+}
+
+/**
+ * @brief Get Architecture number
+ * @rmtoll SCB_CPUID ARCHITECTURE LL_CPUID_GetArchitecture
+ * @retval Value should be equal to 0xC for Cortex-M0 devices
+ */
+__STATIC_INLINE uint32_t LL_CPUID_GetArchitecture(void)
+{
+ return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_ARCHITECTURE_Msk) >> SCB_CPUID_ARCHITECTURE_Pos);
+}
+
+/**
+ * @brief Get Part number
+ * @rmtoll SCB_CPUID PARTNO LL_CPUID_GetParNo
+ * @retval Value should be equal to 0xC20 for Cortex-M0
+ */
+__STATIC_INLINE uint32_t LL_CPUID_GetParNo(void)
+{
+ return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_PARTNO_Msk) >> SCB_CPUID_PARTNO_Pos);
+}
+
+/**
+ * @brief Get Revision number (The p value in the rnpn product revision identifier, indicates patch release)
+ * @rmtoll SCB_CPUID REVISION LL_CPUID_GetRevision
+ * @retval Value between 0 and 255 (0x1: patch 1)
+ */
+__STATIC_INLINE uint32_t LL_CPUID_GetRevision(void)
+{
+ return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_REVISION_Msk) >> SCB_CPUID_REVISION_Pos);
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_LL_CORTEX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_crc.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_crc.h
new file mode 100644
index 0000000..8b7e2da
--- /dev/null
+++ b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_crc.h
@@ -0,0 +1,474 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_ll_crc.h
+ * @author MCD Application Team
+ * @brief Header file of CRC LL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32F0xx_LL_CRC_H
+#define STM32F0xx_LL_CRC_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx.h"
+
+/** @addtogroup STM32F0xx_LL_Driver
+ * @{
+ */
+
+#if defined(CRC)
+
+/** @defgroup CRC_LL CRC
+ * @{
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup CRC_LL_Exported_Constants CRC Exported Constants
+ * @{
+ */
+
+#if defined(CRC_POL_POL)
+/** @defgroup CRC_LL_EC_POLYLENGTH Polynomial length
+ * @{
+ */
+#define LL_CRC_POLYLENGTH_32B 0x00000000U /*!< 32 bits Polynomial size */
+#define LL_CRC_POLYLENGTH_16B CRC_CR_POLYSIZE_0 /*!< 16 bits Polynomial size */
+#define LL_CRC_POLYLENGTH_8B CRC_CR_POLYSIZE_1 /*!< 8 bits Polynomial size */
+#define LL_CRC_POLYLENGTH_7B (CRC_CR_POLYSIZE_1 | CRC_CR_POLYSIZE_0) /*!< 7 bits Polynomial size */
+/**
+ * @}
+ */
+#endif /* CRC_POL_POL */
+
+/** @defgroup CRC_LL_EC_INDATA_REVERSE Input Data Reverse
+ * @{
+ */
+#define LL_CRC_INDATA_REVERSE_NONE 0x00000000U /*!< Input Data bit order not affected */
+#define LL_CRC_INDATA_REVERSE_BYTE CRC_CR_REV_IN_0 /*!< Input Data bit reversal done by byte */
+#define LL_CRC_INDATA_REVERSE_HALFWORD CRC_CR_REV_IN_1 /*!< Input Data bit reversal done by half-word */
+#define LL_CRC_INDATA_REVERSE_WORD (CRC_CR_REV_IN_1 | CRC_CR_REV_IN_0) /*!< Input Data bit reversal done by word */
+/**
+ * @}
+ */
+
+/** @defgroup CRC_LL_EC_OUTDATA_REVERSE Output Data Reverse
+ * @{
+ */
+#define LL_CRC_OUTDATA_REVERSE_NONE 0x00000000U /*!< Output Data bit order not affected */
+#define LL_CRC_OUTDATA_REVERSE_BIT CRC_CR_REV_OUT /*!< Output Data bit reversal done by bit */
+/**
+ * @}
+ */
+
+#if defined(CRC_POL_POL)
+/** @defgroup CRC_LL_EC_Default_Polynomial_Value Default CRC generating polynomial value
+ * @brief Normal representation of this polynomial value is
+ * X^32 + X^26 + X^23 + X^22 + X^16 + X^12 + X^11 + X^10 +X^8 + X^7 + X^5 + X^4 + X^2 + X + 1 .
+ * @{
+ */
+#define LL_CRC_DEFAULT_CRC32_POLY 0x04C11DB7U /*!< Default CRC generating polynomial value */
+/**
+ * @}
+ */
+#endif /* CRC_POL_POL */
+
+/** @defgroup CRC_LL_EC_Default_InitValue Default CRC computation initialization value
+ * @{
+ */
+#define LL_CRC_DEFAULT_CRC_INITVALUE 0xFFFFFFFFU /*!< Default CRC computation initialization value */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup CRC_LL_Exported_Macros CRC Exported Macros
+ * @{
+ */
+
+/** @defgroup CRC_LL_EM_WRITE_READ Common Write and read registers Macros
+ * @{
+ */
+
+/**
+ * @brief Write a value in CRC register
+ * @param __INSTANCE__ CRC Instance
+ * @param __REG__ Register to be written
+ * @param __VALUE__ Value to be written in the register
+ * @retval None
+ */
+#define LL_CRC_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, __VALUE__)
+
+/**
+ * @brief Read a value in CRC register
+ * @param __INSTANCE__ CRC Instance
+ * @param __REG__ Register to be read
+ * @retval Register value
+ */
+#define LL_CRC_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup CRC_LL_Exported_Functions CRC Exported Functions
+ * @{
+ */
+
+/** @defgroup CRC_LL_EF_Configuration CRC Configuration functions
+ * @{
+ */
+
+/**
+ * @brief Reset the CRC calculation unit.
+ * @note If Programmable Initial CRC value feature
+ * is available, also set the Data Register to the value stored in the
+ * CRC_INIT register, otherwise, reset Data Register to its default value.
+ * @rmtoll CR RESET LL_CRC_ResetCRCCalculationUnit
+ * @param CRCx CRC Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_CRC_ResetCRCCalculationUnit(CRC_TypeDef *CRCx)
+{
+ SET_BIT(CRCx->CR, CRC_CR_RESET);
+}
+
+#if defined(CRC_POL_POL)
+/**
+ * @brief Configure size of the polynomial.
+ * @rmtoll CR POLYSIZE LL_CRC_SetPolynomialSize
+ * @param CRCx CRC Instance
+ * @param PolySize This parameter can be one of the following values:
+ * @arg @ref LL_CRC_POLYLENGTH_32B
+ * @arg @ref LL_CRC_POLYLENGTH_16B
+ * @arg @ref LL_CRC_POLYLENGTH_8B
+ * @arg @ref LL_CRC_POLYLENGTH_7B
+ * @retval None
+ */
+__STATIC_INLINE void LL_CRC_SetPolynomialSize(CRC_TypeDef *CRCx, uint32_t PolySize)
+{
+ MODIFY_REG(CRCx->CR, CRC_CR_POLYSIZE, PolySize);
+}
+
+/**
+ * @brief Return size of the polynomial.
+ * @rmtoll CR POLYSIZE LL_CRC_GetPolynomialSize
+ * @param CRCx CRC Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_CRC_POLYLENGTH_32B
+ * @arg @ref LL_CRC_POLYLENGTH_16B
+ * @arg @ref LL_CRC_POLYLENGTH_8B
+ * @arg @ref LL_CRC_POLYLENGTH_7B
+ */
+__STATIC_INLINE uint32_t LL_CRC_GetPolynomialSize(CRC_TypeDef *CRCx)
+{
+ return (uint32_t)(READ_BIT(CRCx->CR, CRC_CR_POLYSIZE));
+}
+#endif /* CRC_POL_POL */
+
+/**
+ * @brief Configure the reversal of the bit order of the input data
+ * @rmtoll CR REV_IN LL_CRC_SetInputDataReverseMode
+ * @param CRCx CRC Instance
+ * @param ReverseMode This parameter can be one of the following values:
+ * @arg @ref LL_CRC_INDATA_REVERSE_NONE
+ * @arg @ref LL_CRC_INDATA_REVERSE_BYTE
+ * @arg @ref LL_CRC_INDATA_REVERSE_HALFWORD
+ * @arg @ref LL_CRC_INDATA_REVERSE_WORD
+ * @retval None
+ */
+__STATIC_INLINE void LL_CRC_SetInputDataReverseMode(CRC_TypeDef *CRCx, uint32_t ReverseMode)
+{
+ MODIFY_REG(CRCx->CR, CRC_CR_REV_IN, ReverseMode);
+}
+
+/**
+ * @brief Return type of reversal for input data bit order
+ * @rmtoll CR REV_IN LL_CRC_GetInputDataReverseMode
+ * @param CRCx CRC Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_CRC_INDATA_REVERSE_NONE
+ * @arg @ref LL_CRC_INDATA_REVERSE_BYTE
+ * @arg @ref LL_CRC_INDATA_REVERSE_HALFWORD
+ * @arg @ref LL_CRC_INDATA_REVERSE_WORD
+ */
+__STATIC_INLINE uint32_t LL_CRC_GetInputDataReverseMode(CRC_TypeDef *CRCx)
+{
+ return (uint32_t)(READ_BIT(CRCx->CR, CRC_CR_REV_IN));
+}
+
+/**
+ * @brief Configure the reversal of the bit order of the Output data
+ * @rmtoll CR REV_OUT LL_CRC_SetOutputDataReverseMode
+ * @param CRCx CRC Instance
+ * @param ReverseMode This parameter can be one of the following values:
+ * @arg @ref LL_CRC_OUTDATA_REVERSE_NONE
+ * @arg @ref LL_CRC_OUTDATA_REVERSE_BIT
+ * @retval None
+ */
+__STATIC_INLINE void LL_CRC_SetOutputDataReverseMode(CRC_TypeDef *CRCx, uint32_t ReverseMode)
+{
+ MODIFY_REG(CRCx->CR, CRC_CR_REV_OUT, ReverseMode);
+}
+
+/**
+ * @brief Configure the reversal of the bit order of the Output data
+ * @rmtoll CR REV_OUT LL_CRC_GetOutputDataReverseMode
+ * @param CRCx CRC Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_CRC_OUTDATA_REVERSE_NONE
+ * @arg @ref LL_CRC_OUTDATA_REVERSE_BIT
+ */
+__STATIC_INLINE uint32_t LL_CRC_GetOutputDataReverseMode(CRC_TypeDef *CRCx)
+{
+ return (uint32_t)(READ_BIT(CRCx->CR, CRC_CR_REV_OUT));
+}
+
+/**
+ * @brief Initialize the Programmable initial CRC value.
+ * @note If the CRC size is less than 32 bits, the least significant bits
+ * are used to write the correct value
+ * @note LL_CRC_DEFAULT_CRC_INITVALUE could be used as value for InitCrc parameter.
+ * @rmtoll INIT INIT LL_CRC_SetInitialData
+ * @param CRCx CRC Instance
+ * @param InitCrc Value to be programmed in Programmable initial CRC value register
+ * @retval None
+ */
+__STATIC_INLINE void LL_CRC_SetInitialData(CRC_TypeDef *CRCx, uint32_t InitCrc)
+{
+ WRITE_REG(CRCx->INIT, InitCrc);
+}
+
+/**
+ * @brief Return current Initial CRC value.
+ * @note If the CRC size is less than 32 bits, the least significant bits
+ * are used to read the correct value
+ * @rmtoll INIT INIT LL_CRC_GetInitialData
+ * @param CRCx CRC Instance
+ * @retval Value programmed in Programmable initial CRC value register
+ */
+__STATIC_INLINE uint32_t LL_CRC_GetInitialData(CRC_TypeDef *CRCx)
+{
+ return (uint32_t)(READ_REG(CRCx->INIT));
+}
+
+#if defined(CRC_POL_POL)
+/**
+ * @brief Initialize the Programmable polynomial value
+ * (coefficients of the polynomial to be used for CRC calculation).
+ * @note LL_CRC_DEFAULT_CRC32_POLY could be used as value for PolynomCoef parameter.
+ * @note Please check Reference Manual and existing Errata Sheets,
+ * regarding possible limitations for Polynomial values usage.
+ * For example, for a polynomial of degree 7, X^7 + X^6 + X^5 + X^2 + 1 is written 0x65
+ * @rmtoll POL POL LL_CRC_SetPolynomialCoef
+ * @param CRCx CRC Instance
+ * @param PolynomCoef Value to be programmed in Programmable Polynomial value register
+ * @retval None
+ */
+__STATIC_INLINE void LL_CRC_SetPolynomialCoef(CRC_TypeDef *CRCx, uint32_t PolynomCoef)
+{
+ WRITE_REG(CRCx->POL, PolynomCoef);
+}
+
+/**
+ * @brief Return current Programmable polynomial value
+ * @note Please check Reference Manual and existing Errata Sheets,
+ * regarding possible limitations for Polynomial values usage.
+ * For example, for a polynomial of degree 7, X^7 + X^6 + X^5 + X^2 + 1 is written 0x65
+ * @rmtoll POL POL LL_CRC_GetPolynomialCoef
+ * @param CRCx CRC Instance
+ * @retval Value programmed in Programmable Polynomial value register
+ */
+__STATIC_INLINE uint32_t LL_CRC_GetPolynomialCoef(CRC_TypeDef *CRCx)
+{
+ return (uint32_t)(READ_REG(CRCx->POL));
+}
+#endif /* CRC_POL_POL */
+
+/**
+ * @}
+ */
+
+/** @defgroup CRC_LL_EF_Data_Management Data_Management
+ * @{
+ */
+
+/**
+ * @brief Write given 32-bit data to the CRC calculator
+ * @rmtoll DR DR LL_CRC_FeedData32
+ * @param CRCx CRC Instance
+ * @param InData value to be provided to CRC calculator between between Min_Data=0 and Max_Data=0xFFFFFFFF
+ * @retval None
+ */
+__STATIC_INLINE void LL_CRC_FeedData32(CRC_TypeDef *CRCx, uint32_t InData)
+{
+ WRITE_REG(CRCx->DR, InData);
+}
+
+/**
+ * @brief Write given 16-bit data to the CRC calculator
+ * @rmtoll DR DR LL_CRC_FeedData16
+ * @param CRCx CRC Instance
+ * @param InData 16 bit value to be provided to CRC calculator between between Min_Data=0 and Max_Data=0xFFFF
+ * @retval None
+ */
+__STATIC_INLINE void LL_CRC_FeedData16(CRC_TypeDef *CRCx, uint16_t InData)
+{
+ __IO uint16_t *pReg;
+
+ pReg = (__IO uint16_t *)(__IO void *)(&CRCx->DR); /* Derogation MisraC2012 R.11.5 */
+ *pReg = InData;
+}
+
+/**
+ * @brief Write given 8-bit data to the CRC calculator
+ * @rmtoll DR DR LL_CRC_FeedData8
+ * @param CRCx CRC Instance
+ * @param InData 8 bit value to be provided to CRC calculator between between Min_Data=0 and Max_Data=0xFF
+ * @retval None
+ */
+__STATIC_INLINE void LL_CRC_FeedData8(CRC_TypeDef *CRCx, uint8_t InData)
+{
+ *(uint8_t __IO *)(&CRCx->DR) = (uint8_t) InData;
+}
+
+/**
+ * @brief Return current CRC calculation result. 32 bits value is returned.
+ * @rmtoll DR DR LL_CRC_ReadData32
+ * @param CRCx CRC Instance
+ * @retval Current CRC calculation result as stored in CRC_DR register (32 bits).
+ */
+__STATIC_INLINE uint32_t LL_CRC_ReadData32(CRC_TypeDef *CRCx)
+{
+ return (uint32_t)(READ_REG(CRCx->DR));
+}
+
+#if defined(CRC_POL_POL)
+/**
+ * @brief Return current CRC calculation result. 16 bits value is returned.
+ * @note This function is expected to be used in a 16 bits CRC polynomial size context.
+ * @rmtoll DR DR LL_CRC_ReadData16
+ * @param CRCx CRC Instance
+ * @retval Current CRC calculation result as stored in CRC_DR register (16 bits).
+ */
+__STATIC_INLINE uint16_t LL_CRC_ReadData16(CRC_TypeDef *CRCx)
+{
+ return (uint16_t)READ_REG(CRCx->DR);
+}
+
+/**
+ * @brief Return current CRC calculation result. 8 bits value is returned.
+ * @note This function is expected to be used in a 8 bits CRC polynomial size context.
+ * @rmtoll DR DR LL_CRC_ReadData8
+ * @param CRCx CRC Instance
+ * @retval Current CRC calculation result as stored in CRC_DR register (8 bits).
+ */
+__STATIC_INLINE uint8_t LL_CRC_ReadData8(CRC_TypeDef *CRCx)
+{
+ return (uint8_t)READ_REG(CRCx->DR);
+}
+
+/**
+ * @brief Return current CRC calculation result. 7 bits value is returned.
+ * @note This function is expected to be used in a 7 bits CRC polynomial size context.
+ * @rmtoll DR DR LL_CRC_ReadData7
+ * @param CRCx CRC Instance
+ * @retval Current CRC calculation result as stored in CRC_DR register (7 bits).
+ */
+__STATIC_INLINE uint8_t LL_CRC_ReadData7(CRC_TypeDef *CRCx)
+{
+ return (uint8_t)(READ_REG(CRCx->DR) & 0x7FU);
+}
+#endif /* CRC_POL_POL */
+
+/**
+ * @brief Return data stored in the Independent Data(IDR) register.
+ * @note This register can be used as a temporary storage location for one byte.
+ * @rmtoll IDR IDR LL_CRC_Read_IDR
+ * @param CRCx CRC Instance
+ * @retval Value stored in CRC_IDR register (General-purpose 8-bit data register).
+ */
+__STATIC_INLINE uint32_t LL_CRC_Read_IDR(CRC_TypeDef *CRCx)
+{
+ return (uint32_t)(READ_REG(CRCx->IDR));
+}
+
+/**
+ * @brief Store data in the Independent Data(IDR) register.
+ * @note This register can be used as a temporary storage location for one byte.
+ * @rmtoll IDR IDR LL_CRC_Write_IDR
+ * @param CRCx CRC Instance
+ * @param InData value to be stored in CRC_IDR register (8-bit) between Min_Data=0 and Max_Data=0xFF
+ * @retval None
+ */
+__STATIC_INLINE void LL_CRC_Write_IDR(CRC_TypeDef *CRCx, uint32_t InData)
+{
+ *((uint8_t __IO *)(&CRCx->IDR)) = (uint8_t) InData;
+}
+/**
+ * @}
+ */
+
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup CRC_LL_EF_Init Initialization and de-initialization functions
+ * @{
+ */
+
+ErrorStatus LL_CRC_DeInit(CRC_TypeDef *CRCx);
+
+/**
+ * @}
+ */
+#endif /* USE_FULL_LL_DRIVER */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* defined(CRC) */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32F0xx_LL_CRC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_crs.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_crs.h
new file mode 100644
index 0000000..0781698
--- /dev/null
+++ b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_crs.h
@@ -0,0 +1,783 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_ll_crs.h
+ * @author MCD Application Team
+ * @brief Header file of CRS LL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_LL_CRS_H
+#define __STM32F0xx_LL_CRS_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx.h"
+
+/** @addtogroup STM32F0xx_LL_Driver
+ * @{
+ */
+
+#if defined(CRS)
+
+/** @defgroup CRS_LL CRS
+ * @{
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup CRS_LL_Exported_Constants CRS Exported Constants
+ * @{
+ */
+
+/** @defgroup CRS_LL_EC_GET_FLAG Get Flags Defines
+ * @brief Flags defines which can be used with LL_CRS_ReadReg function
+ * @{
+ */
+#define LL_CRS_ISR_SYNCOKF CRS_ISR_SYNCOKF
+#define LL_CRS_ISR_SYNCWARNF CRS_ISR_SYNCWARNF
+#define LL_CRS_ISR_ERRF CRS_ISR_ERRF
+#define LL_CRS_ISR_ESYNCF CRS_ISR_ESYNCF
+#define LL_CRS_ISR_SYNCERR CRS_ISR_SYNCERR
+#define LL_CRS_ISR_SYNCMISS CRS_ISR_SYNCMISS
+#define LL_CRS_ISR_TRIMOVF CRS_ISR_TRIMOVF
+/**
+ * @}
+ */
+
+/** @defgroup CRS_LL_EC_IT IT Defines
+ * @brief IT defines which can be used with LL_CRS_ReadReg and LL_CRS_WriteReg functions
+ * @{
+ */
+#define LL_CRS_CR_SYNCOKIE CRS_CR_SYNCOKIE
+#define LL_CRS_CR_SYNCWARNIE CRS_CR_SYNCWARNIE
+#define LL_CRS_CR_ERRIE CRS_CR_ERRIE
+#define LL_CRS_CR_ESYNCIE CRS_CR_ESYNCIE
+/**
+ * @}
+ */
+
+/** @defgroup CRS_LL_EC_SYNC_DIV Synchronization Signal Divider
+ * @{
+ */
+#define LL_CRS_SYNC_DIV_1 ((uint32_t)0x00U) /*!< Synchro Signal not divided (default) */
+#define LL_CRS_SYNC_DIV_2 CRS_CFGR_SYNCDIV_0 /*!< Synchro Signal divided by 2 */
+#define LL_CRS_SYNC_DIV_4 CRS_CFGR_SYNCDIV_1 /*!< Synchro Signal divided by 4 */
+#define LL_CRS_SYNC_DIV_8 (CRS_CFGR_SYNCDIV_1 | CRS_CFGR_SYNCDIV_0) /*!< Synchro Signal divided by 8 */
+#define LL_CRS_SYNC_DIV_16 CRS_CFGR_SYNCDIV_2 /*!< Synchro Signal divided by 16 */
+#define LL_CRS_SYNC_DIV_32 (CRS_CFGR_SYNCDIV_2 | CRS_CFGR_SYNCDIV_0) /*!< Synchro Signal divided by 32 */
+#define LL_CRS_SYNC_DIV_64 (CRS_CFGR_SYNCDIV_2 | CRS_CFGR_SYNCDIV_1) /*!< Synchro Signal divided by 64 */
+#define LL_CRS_SYNC_DIV_128 CRS_CFGR_SYNCDIV /*!< Synchro Signal divided by 128 */
+/**
+ * @}
+ */
+
+/** @defgroup CRS_LL_EC_SYNC_SOURCE Synchronization Signal Source
+ * @{
+ */
+#define LL_CRS_SYNC_SOURCE_GPIO ((uint32_t)0x00U) /*!< Synchro Signal soucre GPIO */
+#define LL_CRS_SYNC_SOURCE_LSE CRS_CFGR_SYNCSRC_0 /*!< Synchro Signal source LSE */
+#define LL_CRS_SYNC_SOURCE_USB CRS_CFGR_SYNCSRC_1 /*!< Synchro Signal source USB SOF (default)*/
+/**
+ * @}
+ */
+
+/** @defgroup CRS_LL_EC_SYNC_POLARITY Synchronization Signal Polarity
+ * @{
+ */
+#define LL_CRS_SYNC_POLARITY_RISING ((uint32_t)0x00U) /*!< Synchro Active on rising edge (default) */
+#define LL_CRS_SYNC_POLARITY_FALLING CRS_CFGR_SYNCPOL /*!< Synchro Active on falling edge */
+/**
+ * @}
+ */
+
+/** @defgroup CRS_LL_EC_FREQERRORDIR Frequency Error Direction
+ * @{
+ */
+#define LL_CRS_FREQ_ERROR_DIR_UP ((uint32_t)0x00U) /*!< Upcounting direction, the actual frequency is above the target */
+#define LL_CRS_FREQ_ERROR_DIR_DOWN ((uint32_t)CRS_ISR_FEDIR) /*!< Downcounting direction, the actual frequency is below the target */
+/**
+ * @}
+ */
+
+/** @defgroup CRS_LL_EC_DEFAULTVALUES Default Values
+ * @{
+ */
+/**
+ * @brief Reset value of the RELOAD field
+ * @note The reset value of the RELOAD field corresponds to a target frequency of 48 MHz
+ * and a synchronization signal frequency of 1 kHz (SOF signal from USB)
+ */
+#define LL_CRS_RELOADVALUE_DEFAULT ((uint32_t)0xBB7FU)
+
+/**
+ * @brief Reset value of Frequency error limit.
+ */
+#define LL_CRS_ERRORLIMIT_DEFAULT ((uint32_t)0x22U)
+
+/**
+ * @brief Reset value of the HSI48 Calibration field
+ * @note The default value is 32, which corresponds to the middle of the trimming interval.
+ * The trimming step is around 67 kHz between two consecutive TRIM steps.
+ * A higher TRIM value corresponds to a higher output frequency
+ */
+#define LL_CRS_HSI48CALIBRATION_DEFAULT ((uint32_t)0x20U)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup CRS_LL_Exported_Macros CRS Exported Macros
+ * @{
+ */
+
+/** @defgroup CRS_LL_EM_WRITE_READ Common Write and read registers Macros
+ * @{
+ */
+
+/**
+ * @brief Write a value in CRS register
+ * @param __INSTANCE__ CRS Instance
+ * @param __REG__ Register to be written
+ * @param __VALUE__ Value to be written in the register
+ * @retval None
+ */
+#define LL_CRS_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__))
+
+/**
+ * @brief Read a value in CRS register
+ * @param __INSTANCE__ CRS Instance
+ * @param __REG__ Register to be read
+ * @retval Register value
+ */
+#define LL_CRS_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__)
+/**
+ * @}
+ */
+
+/** @defgroup CRS_LL_EM_Exported_Macros_Calculate_Reload Exported_Macros_Calculate_Reload
+ * @{
+ */
+
+/**
+ * @brief Macro to calculate reload value to be set in CRS register according to target and sync frequencies
+ * @note The RELOAD value should be selected according to the ratio between
+ * the target frequency and the frequency of the synchronization source after
+ * prescaling. It is then decreased by one in order to reach the expected
+ * synchronization on the zero value. The formula is the following:
+ * RELOAD = (fTARGET / fSYNC) -1
+ * @param __FTARGET__ Target frequency (value in Hz)
+ * @param __FSYNC__ Synchronization signal frequency (value in Hz)
+ * @retval Reload value (in Hz)
+ */
+#define __LL_CRS_CALC_CALCULATE_RELOADVALUE(__FTARGET__, __FSYNC__) (((__FTARGET__) / (__FSYNC__)) - 1U)
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup CRS_LL_Exported_Functions CRS Exported Functions
+ * @{
+ */
+
+/** @defgroup CRS_LL_EF_Configuration Configuration
+ * @{
+ */
+
+/**
+ * @brief Enable Frequency error counter
+ * @note When this bit is set, the CRS_CFGR register is write-protected and cannot be modified
+ * @rmtoll CR CEN LL_CRS_EnableFreqErrorCounter
+ * @retval None
+ */
+__STATIC_INLINE void LL_CRS_EnableFreqErrorCounter(void)
+{
+ SET_BIT(CRS->CR, CRS_CR_CEN);
+}
+
+/**
+ * @brief Disable Frequency error counter
+ * @rmtoll CR CEN LL_CRS_DisableFreqErrorCounter
+ * @retval None
+ */
+__STATIC_INLINE void LL_CRS_DisableFreqErrorCounter(void)
+{
+ CLEAR_BIT(CRS->CR, CRS_CR_CEN);
+}
+
+/**
+ * @brief Check if Frequency error counter is enabled or not
+ * @rmtoll CR CEN LL_CRS_IsEnabledFreqErrorCounter
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_CRS_IsEnabledFreqErrorCounter(void)
+{
+ return (READ_BIT(CRS->CR, CRS_CR_CEN) == (CRS_CR_CEN));
+}
+
+/**
+ * @brief Enable Automatic trimming counter
+ * @rmtoll CR AUTOTRIMEN LL_CRS_EnableAutoTrimming
+ * @retval None
+ */
+__STATIC_INLINE void LL_CRS_EnableAutoTrimming(void)
+{
+ SET_BIT(CRS->CR, CRS_CR_AUTOTRIMEN);
+}
+
+/**
+ * @brief Disable Automatic trimming counter
+ * @rmtoll CR AUTOTRIMEN LL_CRS_DisableAutoTrimming
+ * @retval None
+ */
+__STATIC_INLINE void LL_CRS_DisableAutoTrimming(void)
+{
+ CLEAR_BIT(CRS->CR, CRS_CR_AUTOTRIMEN);
+}
+
+/**
+ * @brief Check if Automatic trimming is enabled or not
+ * @rmtoll CR AUTOTRIMEN LL_CRS_IsEnabledAutoTrimming
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_CRS_IsEnabledAutoTrimming(void)
+{
+ return (READ_BIT(CRS->CR, CRS_CR_AUTOTRIMEN) == (CRS_CR_AUTOTRIMEN));
+}
+
+/**
+ * @brief Set HSI48 oscillator smooth trimming
+ * @note When the AUTOTRIMEN bit is set, this field is controlled by hardware and is read-only
+ * @rmtoll CR TRIM LL_CRS_SetHSI48SmoothTrimming
+ * @param Value a number between Min_Data = 0 and Max_Data = 63
+ * @note Default value can be set thanks to @ref LL_CRS_HSI48CALIBRATION_DEFAULT
+ * @retval None
+ */
+__STATIC_INLINE void LL_CRS_SetHSI48SmoothTrimming(uint32_t Value)
+{
+ MODIFY_REG(CRS->CR, CRS_CR_TRIM, Value << CRS_CR_TRIM_Pos);
+}
+
+/**
+ * @brief Get HSI48 oscillator smooth trimming
+ * @rmtoll CR TRIM LL_CRS_GetHSI48SmoothTrimming
+ * @retval a number between Min_Data = 0 and Max_Data = 63
+ */
+__STATIC_INLINE uint32_t LL_CRS_GetHSI48SmoothTrimming(void)
+{
+ return (uint32_t)(READ_BIT(CRS->CR, CRS_CR_TRIM) >> CRS_CR_TRIM_Pos);
+}
+
+/**
+ * @brief Set counter reload value
+ * @rmtoll CFGR RELOAD LL_CRS_SetReloadCounter
+ * @param Value a number between Min_Data = 0 and Max_Data = 0xFFFF
+ * @note Default value can be set thanks to @ref LL_CRS_RELOADVALUE_DEFAULT
+ * Otherwise it can be calculated in using macro @ref __LL_CRS_CALC_CALCULATE_RELOADVALUE (_FTARGET_, _FSYNC_)
+ * @retval None
+ */
+__STATIC_INLINE void LL_CRS_SetReloadCounter(uint32_t Value)
+{
+ MODIFY_REG(CRS->CFGR, CRS_CFGR_RELOAD, Value);
+}
+
+/**
+ * @brief Get counter reload value
+ * @rmtoll CFGR RELOAD LL_CRS_GetReloadCounter
+ * @retval a number between Min_Data = 0 and Max_Data = 0xFFFF
+ */
+__STATIC_INLINE uint32_t LL_CRS_GetReloadCounter(void)
+{
+ return (uint32_t)(READ_BIT(CRS->CFGR, CRS_CFGR_RELOAD));
+}
+
+/**
+ * @brief Set frequency error limit
+ * @rmtoll CFGR FELIM LL_CRS_SetFreqErrorLimit
+ * @param Value a number between Min_Data = 0 and Max_Data = 255
+ * @note Default value can be set thanks to @ref LL_CRS_ERRORLIMIT_DEFAULT
+ * @retval None
+ */
+__STATIC_INLINE void LL_CRS_SetFreqErrorLimit(uint32_t Value)
+{
+ MODIFY_REG(CRS->CFGR, CRS_CFGR_FELIM, Value << CRS_CFGR_FELIM_Pos);
+}
+
+/**
+ * @brief Get frequency error limit
+ * @rmtoll CFGR FELIM LL_CRS_GetFreqErrorLimit
+ * @retval A number between Min_Data = 0 and Max_Data = 255
+ */
+__STATIC_INLINE uint32_t LL_CRS_GetFreqErrorLimit(void)
+{
+ return (uint32_t)(READ_BIT(CRS->CFGR, CRS_CFGR_FELIM) >> CRS_CFGR_FELIM_Pos);
+}
+
+/**
+ * @brief Set division factor for SYNC signal
+ * @rmtoll CFGR SYNCDIV LL_CRS_SetSyncDivider
+ * @param Divider This parameter can be one of the following values:
+ * @arg @ref LL_CRS_SYNC_DIV_1
+ * @arg @ref LL_CRS_SYNC_DIV_2
+ * @arg @ref LL_CRS_SYNC_DIV_4
+ * @arg @ref LL_CRS_SYNC_DIV_8
+ * @arg @ref LL_CRS_SYNC_DIV_16
+ * @arg @ref LL_CRS_SYNC_DIV_32
+ * @arg @ref LL_CRS_SYNC_DIV_64
+ * @arg @ref LL_CRS_SYNC_DIV_128
+ * @retval None
+ */
+__STATIC_INLINE void LL_CRS_SetSyncDivider(uint32_t Divider)
+{
+ MODIFY_REG(CRS->CFGR, CRS_CFGR_SYNCDIV, Divider);
+}
+
+/**
+ * @brief Get division factor for SYNC signal
+ * @rmtoll CFGR SYNCDIV LL_CRS_GetSyncDivider
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_CRS_SYNC_DIV_1
+ * @arg @ref LL_CRS_SYNC_DIV_2
+ * @arg @ref LL_CRS_SYNC_DIV_4
+ * @arg @ref LL_CRS_SYNC_DIV_8
+ * @arg @ref LL_CRS_SYNC_DIV_16
+ * @arg @ref LL_CRS_SYNC_DIV_32
+ * @arg @ref LL_CRS_SYNC_DIV_64
+ * @arg @ref LL_CRS_SYNC_DIV_128
+ */
+__STATIC_INLINE uint32_t LL_CRS_GetSyncDivider(void)
+{
+ return (uint32_t)(READ_BIT(CRS->CFGR, CRS_CFGR_SYNCDIV));
+}
+
+/**
+ * @brief Set SYNC signal source
+ * @rmtoll CFGR SYNCSRC LL_CRS_SetSyncSignalSource
+ * @param Source This parameter can be one of the following values:
+ * @arg @ref LL_CRS_SYNC_SOURCE_GPIO
+ * @arg @ref LL_CRS_SYNC_SOURCE_LSE
+ * @arg @ref LL_CRS_SYNC_SOURCE_USB
+ * @retval None
+ */
+__STATIC_INLINE void LL_CRS_SetSyncSignalSource(uint32_t Source)
+{
+ MODIFY_REG(CRS->CFGR, CRS_CFGR_SYNCSRC, Source);
+}
+
+/**
+ * @brief Get SYNC signal source
+ * @rmtoll CFGR SYNCSRC LL_CRS_GetSyncSignalSource
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_CRS_SYNC_SOURCE_GPIO
+ * @arg @ref LL_CRS_SYNC_SOURCE_LSE
+ * @arg @ref LL_CRS_SYNC_SOURCE_USB
+ */
+__STATIC_INLINE uint32_t LL_CRS_GetSyncSignalSource(void)
+{
+ return (uint32_t)(READ_BIT(CRS->CFGR, CRS_CFGR_SYNCSRC));
+}
+
+/**
+ * @brief Set input polarity for the SYNC signal source
+ * @rmtoll CFGR SYNCPOL LL_CRS_SetSyncPolarity
+ * @param Polarity This parameter can be one of the following values:
+ * @arg @ref LL_CRS_SYNC_POLARITY_RISING
+ * @arg @ref LL_CRS_SYNC_POLARITY_FALLING
+ * @retval None
+ */
+__STATIC_INLINE void LL_CRS_SetSyncPolarity(uint32_t Polarity)
+{
+ MODIFY_REG(CRS->CFGR, CRS_CFGR_SYNCPOL, Polarity);
+}
+
+/**
+ * @brief Get input polarity for the SYNC signal source
+ * @rmtoll CFGR SYNCPOL LL_CRS_GetSyncPolarity
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_CRS_SYNC_POLARITY_RISING
+ * @arg @ref LL_CRS_SYNC_POLARITY_FALLING
+ */
+__STATIC_INLINE uint32_t LL_CRS_GetSyncPolarity(void)
+{
+ return (uint32_t)(READ_BIT(CRS->CFGR, CRS_CFGR_SYNCPOL));
+}
+
+/**
+ * @brief Configure CRS for the synchronization
+ * @rmtoll CR TRIM LL_CRS_ConfigSynchronization\n
+ * CFGR RELOAD LL_CRS_ConfigSynchronization\n
+ * CFGR FELIM LL_CRS_ConfigSynchronization\n
+ * CFGR SYNCDIV LL_CRS_ConfigSynchronization\n
+ * CFGR SYNCSRC LL_CRS_ConfigSynchronization\n
+ * CFGR SYNCPOL LL_CRS_ConfigSynchronization
+ * @param HSI48CalibrationValue a number between Min_Data = 0 and Max_Data = 63
+ * @param ErrorLimitValue a number between Min_Data = 0 and Max_Data = 0xFFFF
+ * @param ReloadValue a number between Min_Data = 0 and Max_Data = 255
+ * @param Settings This parameter can be a combination of the following values:
+ * @arg @ref LL_CRS_SYNC_DIV_1 or @ref LL_CRS_SYNC_DIV_2 or @ref LL_CRS_SYNC_DIV_4 or @ref LL_CRS_SYNC_DIV_8
+ * or @ref LL_CRS_SYNC_DIV_16 or @ref LL_CRS_SYNC_DIV_32 or @ref LL_CRS_SYNC_DIV_64 or @ref LL_CRS_SYNC_DIV_128
+ * @arg @ref LL_CRS_SYNC_SOURCE_GPIO or @ref LL_CRS_SYNC_SOURCE_LSE or @ref LL_CRS_SYNC_SOURCE_USB
+ * @arg @ref LL_CRS_SYNC_POLARITY_RISING or @ref LL_CRS_SYNC_POLARITY_FALLING
+ * @retval None
+ */
+__STATIC_INLINE void LL_CRS_ConfigSynchronization(uint32_t HSI48CalibrationValue, uint32_t ErrorLimitValue, uint32_t ReloadValue, uint32_t Settings)
+{
+ MODIFY_REG(CRS->CR, CRS_CR_TRIM, HSI48CalibrationValue << CRS_CR_TRIM_Pos);
+ MODIFY_REG(CRS->CFGR,
+ CRS_CFGR_RELOAD | CRS_CFGR_FELIM | CRS_CFGR_SYNCDIV | CRS_CFGR_SYNCSRC | CRS_CFGR_SYNCPOL,
+ ReloadValue | (ErrorLimitValue << CRS_CFGR_FELIM_Pos) | Settings);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup CRS_LL_EF_CRS_Management CRS_Management
+ * @{
+ */
+
+/**
+ * @brief Generate software SYNC event
+ * @rmtoll CR SWSYNC LL_CRS_GenerateEvent_SWSYNC
+ * @retval None
+ */
+__STATIC_INLINE void LL_CRS_GenerateEvent_SWSYNC(void)
+{
+ SET_BIT(CRS->CR, CRS_CR_SWSYNC);
+}
+
+/**
+ * @brief Get the frequency error direction latched in the time of the last
+ * SYNC event
+ * @rmtoll ISR FEDIR LL_CRS_GetFreqErrorDirection
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_CRS_FREQ_ERROR_DIR_UP
+ * @arg @ref LL_CRS_FREQ_ERROR_DIR_DOWN
+ */
+__STATIC_INLINE uint32_t LL_CRS_GetFreqErrorDirection(void)
+{
+ return (uint32_t)(READ_BIT(CRS->ISR, CRS_ISR_FEDIR));
+}
+
+/**
+ * @brief Get the frequency error counter value latched in the time of the last SYNC event
+ * @rmtoll ISR FECAP LL_CRS_GetFreqErrorCapture
+ * @retval A number between Min_Data = 0x0000 and Max_Data = 0xFFFF
+ */
+__STATIC_INLINE uint32_t LL_CRS_GetFreqErrorCapture(void)
+{
+ return (uint32_t)(READ_BIT(CRS->ISR, CRS_ISR_FECAP) >> CRS_ISR_FECAP_Pos);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup CRS_LL_EF_FLAG_Management FLAG_Management
+ * @{
+ */
+
+/**
+ * @brief Check if SYNC event OK signal occurred or not
+ * @rmtoll ISR SYNCOKF LL_CRS_IsActiveFlag_SYNCOK
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_CRS_IsActiveFlag_SYNCOK(void)
+{
+ return (READ_BIT(CRS->ISR, CRS_ISR_SYNCOKF) == (CRS_ISR_SYNCOKF));
+}
+
+/**
+ * @brief Check if SYNC warning signal occurred or not
+ * @rmtoll ISR SYNCWARNF LL_CRS_IsActiveFlag_SYNCWARN
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_CRS_IsActiveFlag_SYNCWARN(void)
+{
+ return (READ_BIT(CRS->ISR, CRS_ISR_SYNCWARNF) == (CRS_ISR_SYNCWARNF));
+}
+
+/**
+ * @brief Check if Synchronization or trimming error signal occurred or not
+ * @rmtoll ISR ERRF LL_CRS_IsActiveFlag_ERR
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_CRS_IsActiveFlag_ERR(void)
+{
+ return (READ_BIT(CRS->ISR, CRS_ISR_ERRF) == (CRS_ISR_ERRF));
+}
+
+/**
+ * @brief Check if Expected SYNC signal occurred or not
+ * @rmtoll ISR ESYNCF LL_CRS_IsActiveFlag_ESYNC
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_CRS_IsActiveFlag_ESYNC(void)
+{
+ return (READ_BIT(CRS->ISR, CRS_ISR_ESYNCF) == (CRS_ISR_ESYNCF));
+}
+
+/**
+ * @brief Check if SYNC error signal occurred or not
+ * @rmtoll ISR SYNCERR LL_CRS_IsActiveFlag_SYNCERR
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_CRS_IsActiveFlag_SYNCERR(void)
+{
+ return (READ_BIT(CRS->ISR, CRS_ISR_SYNCERR) == (CRS_ISR_SYNCERR));
+}
+
+/**
+ * @brief Check if SYNC missed error signal occurred or not
+ * @rmtoll ISR SYNCMISS LL_CRS_IsActiveFlag_SYNCMISS
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_CRS_IsActiveFlag_SYNCMISS(void)
+{
+ return (READ_BIT(CRS->ISR, CRS_ISR_SYNCMISS) == (CRS_ISR_SYNCMISS));
+}
+
+/**
+ * @brief Check if Trimming overflow or underflow occurred or not
+ * @rmtoll ISR TRIMOVF LL_CRS_IsActiveFlag_TRIMOVF
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_CRS_IsActiveFlag_TRIMOVF(void)
+{
+ return (READ_BIT(CRS->ISR, CRS_ISR_TRIMOVF) == (CRS_ISR_TRIMOVF));
+}
+
+/**
+ * @brief Clear the SYNC event OK flag
+ * @rmtoll ICR SYNCOKC LL_CRS_ClearFlag_SYNCOK
+ * @retval None
+ */
+__STATIC_INLINE void LL_CRS_ClearFlag_SYNCOK(void)
+{
+ WRITE_REG(CRS->ICR, CRS_ICR_SYNCOKC);
+}
+
+/**
+ * @brief Clear the SYNC warning flag
+ * @rmtoll ICR SYNCWARNC LL_CRS_ClearFlag_SYNCWARN
+ * @retval None
+ */
+__STATIC_INLINE void LL_CRS_ClearFlag_SYNCWARN(void)
+{
+ WRITE_REG(CRS->ICR, CRS_ICR_SYNCWARNC);
+}
+
+/**
+ * @brief Clear TRIMOVF, SYNCMISS and SYNCERR bits and consequently also
+ * the ERR flag
+ * @rmtoll ICR ERRC LL_CRS_ClearFlag_ERR
+ * @retval None
+ */
+__STATIC_INLINE void LL_CRS_ClearFlag_ERR(void)
+{
+ WRITE_REG(CRS->ICR, CRS_ICR_ERRC);
+}
+
+/**
+ * @brief Clear Expected SYNC flag
+ * @rmtoll ICR ESYNCC LL_CRS_ClearFlag_ESYNC
+ * @retval None
+ */
+__STATIC_INLINE void LL_CRS_ClearFlag_ESYNC(void)
+{
+ WRITE_REG(CRS->ICR, CRS_ICR_ESYNCC);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup CRS_LL_EF_IT_Management IT_Management
+ * @{
+ */
+
+/**
+ * @brief Enable SYNC event OK interrupt
+ * @rmtoll CR SYNCOKIE LL_CRS_EnableIT_SYNCOK
+ * @retval None
+ */
+__STATIC_INLINE void LL_CRS_EnableIT_SYNCOK(void)
+{
+ SET_BIT(CRS->CR, CRS_CR_SYNCOKIE);
+}
+
+/**
+ * @brief Disable SYNC event OK interrupt
+ * @rmtoll CR SYNCOKIE LL_CRS_DisableIT_SYNCOK
+ * @retval None
+ */
+__STATIC_INLINE void LL_CRS_DisableIT_SYNCOK(void)
+{
+ CLEAR_BIT(CRS->CR, CRS_CR_SYNCOKIE);
+}
+
+/**
+ * @brief Check if SYNC event OK interrupt is enabled or not
+ * @rmtoll CR SYNCOKIE LL_CRS_IsEnabledIT_SYNCOK
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_CRS_IsEnabledIT_SYNCOK(void)
+{
+ return (READ_BIT(CRS->CR, CRS_CR_SYNCOKIE) == (CRS_CR_SYNCOKIE));
+}
+
+/**
+ * @brief Enable SYNC warning interrupt
+ * @rmtoll CR SYNCWARNIE LL_CRS_EnableIT_SYNCWARN
+ * @retval None
+ */
+__STATIC_INLINE void LL_CRS_EnableIT_SYNCWARN(void)
+{
+ SET_BIT(CRS->CR, CRS_CR_SYNCWARNIE);
+}
+
+/**
+ * @brief Disable SYNC warning interrupt
+ * @rmtoll CR SYNCWARNIE LL_CRS_DisableIT_SYNCWARN
+ * @retval None
+ */
+__STATIC_INLINE void LL_CRS_DisableIT_SYNCWARN(void)
+{
+ CLEAR_BIT(CRS->CR, CRS_CR_SYNCWARNIE);
+}
+
+/**
+ * @brief Check if SYNC warning interrupt is enabled or not
+ * @rmtoll CR SYNCWARNIE LL_CRS_IsEnabledIT_SYNCWARN
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_CRS_IsEnabledIT_SYNCWARN(void)
+{
+ return (READ_BIT(CRS->CR, CRS_CR_SYNCWARNIE) == (CRS_CR_SYNCWARNIE));
+}
+
+/**
+ * @brief Enable Synchronization or trimming error interrupt
+ * @rmtoll CR ERRIE LL_CRS_EnableIT_ERR
+ * @retval None
+ */
+__STATIC_INLINE void LL_CRS_EnableIT_ERR(void)
+{
+ SET_BIT(CRS->CR, CRS_CR_ERRIE);
+}
+
+/**
+ * @brief Disable Synchronization or trimming error interrupt
+ * @rmtoll CR ERRIE LL_CRS_DisableIT_ERR
+ * @retval None
+ */
+__STATIC_INLINE void LL_CRS_DisableIT_ERR(void)
+{
+ CLEAR_BIT(CRS->CR, CRS_CR_ERRIE);
+}
+
+/**
+ * @brief Check if Synchronization or trimming error interrupt is enabled or not
+ * @rmtoll CR ERRIE LL_CRS_IsEnabledIT_ERR
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_CRS_IsEnabledIT_ERR(void)
+{
+ return (READ_BIT(CRS->CR, CRS_CR_ERRIE) == (CRS_CR_ERRIE));
+}
+
+/**
+ * @brief Enable Expected SYNC interrupt
+ * @rmtoll CR ESYNCIE LL_CRS_EnableIT_ESYNC
+ * @retval None
+ */
+__STATIC_INLINE void LL_CRS_EnableIT_ESYNC(void)
+{
+ SET_BIT(CRS->CR, CRS_CR_ESYNCIE);
+}
+
+/**
+ * @brief Disable Expected SYNC interrupt
+ * @rmtoll CR ESYNCIE LL_CRS_DisableIT_ESYNC
+ * @retval None
+ */
+__STATIC_INLINE void LL_CRS_DisableIT_ESYNC(void)
+{
+ CLEAR_BIT(CRS->CR, CRS_CR_ESYNCIE);
+}
+
+/**
+ * @brief Check if Expected SYNC interrupt is enabled or not
+ * @rmtoll CR ESYNCIE LL_CRS_IsEnabledIT_ESYNC
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_CRS_IsEnabledIT_ESYNC(void)
+{
+ return (READ_BIT(CRS->CR, CRS_CR_ESYNCIE) == (CRS_CR_ESYNCIE));
+}
+
+/**
+ * @}
+ */
+
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup CRS_LL_EF_Init Initialization and de-initialization functions
+ * @{
+ */
+
+ErrorStatus LL_CRS_DeInit(void);
+
+/**
+ * @}
+ */
+#endif /* USE_FULL_LL_DRIVER */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* defined(CRS) */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_LL_CRS_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_dac.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_dac.h
new file mode 100644
index 0000000..7ec899f
--- /dev/null
+++ b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_dac.h
@@ -0,0 +1,1422 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_ll_dac.h
+ * @author MCD Application Team
+ * @brief Header file of DAC LL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_LL_DAC_H
+#define __STM32F0xx_LL_DAC_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx.h"
+
+/** @addtogroup STM32F0xx_LL_Driver
+ * @{
+ */
+
+#if defined (DAC1)
+
+/** @defgroup DAC_LL DAC
+ * @{
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup DAC_LL_Private_Constants DAC Private Constants
+ * @{
+ */
+
+/* Internal masks for DAC channels definition */
+/* To select into literal LL_DAC_CHANNEL_x the relevant bits for: */
+/* - channel bits position into register CR */
+/* - channel bits position into register SWTRIG */
+/* - channel register offset of data holding register DHRx */
+/* - channel register offset of data output register DORx */
+#define DAC_CR_CH1_BITOFFSET 0U /* Position of channel bits into registers CR, MCR, CCR, SHHR, SHRR of channel 1 */
+#define DAC_CR_CH2_BITOFFSET 16U /* Position of channel bits into registers CR, MCR, CCR, SHHR, SHRR of channel 2 */
+#define DAC_CR_CHX_BITOFFSET_MASK (DAC_CR_CH1_BITOFFSET | DAC_CR_CH2_BITOFFSET)
+
+#define DAC_SWTR_CH1 (DAC_SWTRIGR_SWTRIG1) /* Channel bit into register SWTRIGR of channel 1. This bit is into area of LL_DAC_CR_CHx_BITOFFSET but excluded by mask DAC_CR_CHX_BITOFFSET_MASK (done to be enable to trig SW start of both DAC channels simultaneously). */
+#if defined(DAC_CHANNEL2_SUPPORT)
+#define DAC_SWTR_CH2 (DAC_SWTRIGR_SWTRIG2) /* Channel bit into register SWTRIGR of channel 2. This bit is into area of LL_DAC_CR_CHx_BITOFFSET but excluded by mask DAC_CR_CHX_BITOFFSET_MASK (done to be enable to trig SW start of both DAC channels simultaneously). */
+#define DAC_SWTR_CHX_MASK (DAC_SWTR_CH1 | DAC_SWTR_CH2)
+#else
+#define DAC_SWTR_CHX_MASK (DAC_SWTR_CH1)
+#endif /* DAC_CHANNEL2_SUPPORT */
+
+#define DAC_REG_DHR12R1_REGOFFSET 0x00000000U /* Register DHR12Rx channel 1 taken as reference */
+#define DAC_REG_DHR12L1_REGOFFSET 0x00100000U /* Register offset of DHR12Lx channel 1 versus DHR12Rx channel 1 (shifted left of 20 bits) */
+#define DAC_REG_DHR8R1_REGOFFSET 0x02000000U /* Register offset of DHR8Rx channel 1 versus DHR12Rx channel 1 (shifted left of 24 bits) */
+#if defined(DAC_CHANNEL2_SUPPORT)
+#define DAC_REG_DHR12R2_REGOFFSET 0x00030000U /* Register offset of DHR12Rx channel 2 versus DHR12Rx channel 1 (shifted left of 16 bits) */
+#define DAC_REG_DHR12L2_REGOFFSET 0x00400000U /* Register offset of DHR12Lx channel 2 versus DHR12Rx channel 1 (shifted left of 20 bits) */
+#define DAC_REG_DHR8R2_REGOFFSET 0x05000000U /* Register offset of DHR8Rx channel 2 versus DHR12Rx channel 1 (shifted left of 24 bits) */
+#endif /* DAC_CHANNEL2_SUPPORT */
+#define DAC_REG_DHR12RX_REGOFFSET_MASK 0x000F0000U
+#define DAC_REG_DHR12LX_REGOFFSET_MASK 0x00F00000U
+#define DAC_REG_DHR8RX_REGOFFSET_MASK 0x0F000000U
+#define DAC_REG_DHRX_REGOFFSET_MASK (DAC_REG_DHR12RX_REGOFFSET_MASK | DAC_REG_DHR12LX_REGOFFSET_MASK | DAC_REG_DHR8RX_REGOFFSET_MASK)
+
+#define DAC_REG_DOR1_REGOFFSET 0x00000000U /* Register DORx channel 1 taken as reference */
+#if defined(DAC_CHANNEL2_SUPPORT)
+#define DAC_REG_DOR2_REGOFFSET 0x10000000U /* Register offset of DORx channel 1 versus DORx channel 2 (shifted left of 28 bits) */
+#define DAC_REG_DORX_REGOFFSET_MASK (DAC_REG_DOR1_REGOFFSET | DAC_REG_DOR2_REGOFFSET)
+#else
+#define DAC_REG_DORX_REGOFFSET_MASK (DAC_REG_DOR1_REGOFFSET)
+#endif /* DAC_CHANNEL2_SUPPORT */
+
+#define DAC_REG_REGOFFSET_MASK_POSBIT0 0x0000000FU /* Mask of registers offset (DHR12Rx, DHR12Lx, DHR8Rx, DORx, ...) when shifted to position 0 */
+
+#define DAC_REG_DHR12RX_REGOFFSET_BITOFFSET_POS 16U /* Position of bits register offset of DHR12Rx channel 1 or 2 versus DHR12Rx channel 1 (shifted left of 16 bits) */
+#define DAC_REG_DHR12LX_REGOFFSET_BITOFFSET_POS 20U /* Position of bits register offset of DHR12Lx channel 1 or 2 versus DHR12Rx channel 1 (shifted left of 20 bits) */
+#define DAC_REG_DHR8RX_REGOFFSET_BITOFFSET_POS 24U /* Position of bits register offset of DHR8Rx channel 1 or 2 versus DHR12Rx channel 1 (shifted left of 24 bits) */
+#define DAC_REG_DORX_REGOFFSET_BITOFFSET_POS 28U /* Position of bits register offset of DORx channel 1 or 2 versus DORx channel 1 (shifted left of 28 bits) */
+
+/* DAC registers bits positions */
+#if defined(DAC_CHANNEL2_SUPPORT)
+#define DAC_DHR12RD_DACC2DHR_BITOFFSET_POS 16U /* Value equivalent to POSITION_VAL(DAC_DHR12RD_DACC2DHR) */
+#define DAC_DHR12LD_DACC2DHR_BITOFFSET_POS 20U /* Value equivalent to POSITION_VAL(DAC_DHR12LD_DACC2DHR) */
+#define DAC_DHR8RD_DACC2DHR_BITOFFSET_POS 8U /* Value equivalent to POSITION_VAL(DAC_DHR8RD_DACC2DHR) */
+#endif /* DAC_CHANNEL2_SUPPORT */
+
+/* Miscellaneous data */
+#define DAC_DIGITAL_SCALE_12BITS 4095U /* Full-scale digital value with a resolution of 12 bits (voltage range determined by analog voltage references Vref+ and Vref-, refer to reference manual) */
+
+/**
+ * @}
+ */
+
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup DAC_LL_Private_Macros DAC Private Macros
+ * @{
+ */
+
+/**
+ * @brief Driver macro reserved for internal use: set a pointer to
+ * a register from a register basis from which an offset
+ * is applied.
+ * @param __REG__ Register basis from which the offset is applied.
+ * @param __REG_OFFFSET__ Offset to be applied (unit: number of registers).
+ * @retval Pointer to register address
+*/
+#define __DAC_PTR_REG_OFFSET(__REG__, __REG_OFFFSET__) \
+ ((uint32_t *)((uint32_t) ((uint32_t)(&(__REG__)) + ((__REG_OFFFSET__) << 2U))))
+
+/**
+ * @}
+ */
+
+
+/* Exported types ------------------------------------------------------------*/
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup DAC_LL_ES_INIT DAC Exported Init structure
+ * @{
+ */
+
+/**
+ * @brief Structure definition of some features of DAC instance.
+ */
+typedef struct
+{
+ uint32_t TriggerSource; /*!< Set the conversion trigger source for the selected DAC channel: internal (SW start) or from external IP (timer event, external interrupt line).
+ This parameter can be a value of @ref DAC_LL_EC_TRIGGER_SOURCE
+
+ This feature can be modified afterwards using unitary function @ref LL_DAC_SetTriggerSource(). */
+
+#if defined(DAC_CR_WAVE1)
+ uint32_t WaveAutoGeneration; /*!< Set the waveform automatic generation mode for the selected DAC channel.
+ This parameter can be a value of @ref DAC_LL_EC_WAVE_AUTO_GENERATION_MODE
+
+ This feature can be modified afterwards using unitary function @ref LL_DAC_SetWaveAutoGeneration(). */
+
+ uint32_t WaveAutoGenerationConfig; /*!< Set the waveform automatic generation mode for the selected DAC channel.
+ If waveform automatic generation mode is set to noise, this parameter can be a value of @ref DAC_LL_EC_WAVE_NOISE_LFSR_UNMASK_BITS
+ If waveform automatic generation mode is set to triangle, this parameter can be a value of @ref DAC_LL_EC_WAVE_TRIANGLE_AMPLITUDE
+ @note If waveform automatic generation mode is disabled, this parameter is discarded.
+
+ This feature can be modified afterwards using unitary function @ref LL_DAC_SetWaveNoiseLFSR() or @ref LL_DAC_SetWaveTriangleAmplitude(), depending on the wave automatic generation selected. */
+#endif
+
+ uint32_t OutputBuffer; /*!< Set the output buffer for the selected DAC channel.
+ This parameter can be a value of @ref DAC_LL_EC_OUTPUT_BUFFER
+
+ This feature can be modified afterwards using unitary function @ref LL_DAC_SetOutputBuffer(). */
+
+} LL_DAC_InitTypeDef;
+
+/**
+ * @}
+ */
+#endif /* USE_FULL_LL_DRIVER */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup DAC_LL_Exported_Constants DAC Exported Constants
+ * @{
+ */
+
+/** @defgroup DAC_LL_EC_GET_FLAG DAC flags
+ * @brief Flags defines which can be used with LL_DAC_ReadReg function
+ * @{
+ */
+/* DAC channel 1 flags */
+#define LL_DAC_FLAG_DMAUDR1 (DAC_SR_DMAUDR1) /*!< DAC channel 1 flag DMA underrun */
+
+#if defined(DAC_CHANNEL2_SUPPORT)
+/* DAC channel 2 flags */
+#define LL_DAC_FLAG_DMAUDR2 (DAC_SR_DMAUDR2) /*!< DAC channel 2 flag DMA underrun */
+#endif /* DAC_CHANNEL2_SUPPORT */
+/**
+ * @}
+ */
+
+/** @defgroup DAC_LL_EC_IT DAC interruptions
+ * @brief IT defines which can be used with LL_DAC_ReadReg and LL_DAC_WriteReg functions
+ * @{
+ */
+#define LL_DAC_IT_DMAUDRIE1 (DAC_CR_DMAUDRIE1) /*!< DAC channel 1 interruption DMA underrun */
+#if defined(DAC_CHANNEL2_SUPPORT)
+#define LL_DAC_IT_DMAUDRIE2 (DAC_CR_DMAUDRIE2) /*!< DAC channel 2 interruption DMA underrun */
+#endif /* DAC_CHANNEL2_SUPPORT */
+/**
+ * @}
+ */
+
+/** @defgroup DAC_LL_EC_CHANNEL DAC channels
+ * @{
+ */
+#define LL_DAC_CHANNEL_1 (DAC_REG_DOR1_REGOFFSET | DAC_REG_DHR12R1_REGOFFSET | DAC_REG_DHR12L1_REGOFFSET | DAC_REG_DHR8R1_REGOFFSET | DAC_CR_CH1_BITOFFSET | DAC_SWTR_CH1) /*!< DAC channel 1 */
+#if defined(DAC_CHANNEL2_SUPPORT)
+#define LL_DAC_CHANNEL_2 (DAC_REG_DOR2_REGOFFSET | DAC_REG_DHR12R2_REGOFFSET | DAC_REG_DHR12L2_REGOFFSET | DAC_REG_DHR8R2_REGOFFSET | DAC_CR_CH2_BITOFFSET | DAC_SWTR_CH2) /*!< DAC channel 2 */
+#endif /* DAC_CHANNEL2_SUPPORT */
+/**
+ * @}
+ */
+
+/** @defgroup DAC_LL_EC_TRIGGER_SOURCE DAC trigger source
+ * @{
+ */
+#define LL_DAC_TRIG_SOFTWARE (DAC_CR_TSEL1_2 | DAC_CR_TSEL1_1 | DAC_CR_TSEL1_0) /*!< DAC channel conversion trigger internal (SW start) */
+#define LL_DAC_TRIG_EXT_TIM2_TRGO (DAC_CR_TSEL1_2 ) /*!< DAC channel conversion trigger from external IP: TIM2 TRGO. */
+#define LL_DAC_TRIG_EXT_TIM3_TRGO ( DAC_CR_TSEL1_0) /*!< DAC channel conversion trigger from external IP: TIM3 TRGO. */
+#define LL_DAC_TRIG_EXT_TIM4_TRGO (DAC_CR_TSEL1_2 | DAC_CR_TSEL1_0) /*!< DAC channel conversion trigger from external IP: TIM4 TRGO. */
+#define LL_DAC_TRIG_EXT_TIM6_TRGO 0x00000000U /*!< DAC channel conversion trigger from external IP: TIM6 TRGO. */
+#define LL_DAC_TRIG_EXT_TIM7_TRGO ( DAC_CR_TSEL1_1 ) /*!< DAC channel conversion trigger from external IP: TIM7 TRGO. */
+#define LL_DAC_TRIG_EXT_TIM15_TRGO ( DAC_CR_TSEL1_1 | DAC_CR_TSEL1_0) /*!< DAC channel conversion trigger from external IP: TIM15 TRGO. */
+#define LL_DAC_TRIG_EXT_EXTI_LINE9 (DAC_CR_TSEL1_2 | DAC_CR_TSEL1_1 ) /*!< DAC channel conversion trigger from external IP: external interrupt line 9. */
+/**
+ * @}
+ */
+
+/** @defgroup DAC_LL_EC_WAVE_AUTO_GENERATION_MODE DAC waveform automatic generation mode
+ * @{
+ */
+#define LL_DAC_WAVE_AUTO_GENERATION_NONE 0x00000000U /*!< DAC channel wave auto generation mode disabled. */
+#define LL_DAC_WAVE_AUTO_GENERATION_NOISE (DAC_CR_WAVE1_0) /*!< DAC channel wave auto generation mode enabled, set generated noise waveform. */
+#define LL_DAC_WAVE_AUTO_GENERATION_TRIANGLE (DAC_CR_WAVE1_1) /*!< DAC channel wave auto generation mode enabled, set generated triangle waveform. */
+/**
+ * @}
+ */
+
+/** @defgroup DAC_LL_EC_WAVE_NOISE_LFSR_UNMASK_BITS DAC wave generation - Noise LFSR unmask bits
+ * @{
+ */
+#define LL_DAC_NOISE_LFSR_UNMASK_BIT0 0x00000000U /*!< Noise wave generation, unmask LFSR bit0, for the selected DAC channel */
+#define LL_DAC_NOISE_LFSR_UNMASK_BITS1_0 ( DAC_CR_MAMP1_0) /*!< Noise wave generation, unmask LFSR bits[1:0], for the selected DAC channel */
+#define LL_DAC_NOISE_LFSR_UNMASK_BITS2_0 ( DAC_CR_MAMP1_1 ) /*!< Noise wave generation, unmask LFSR bits[2:0], for the selected DAC channel */
+#define LL_DAC_NOISE_LFSR_UNMASK_BITS3_0 ( DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Noise wave generation, unmask LFSR bits[3:0], for the selected DAC channel */
+#define LL_DAC_NOISE_LFSR_UNMASK_BITS4_0 ( DAC_CR_MAMP1_2 ) /*!< Noise wave generation, unmask LFSR bits[4:0], for the selected DAC channel */
+#define LL_DAC_NOISE_LFSR_UNMASK_BITS5_0 ( DAC_CR_MAMP1_2 | DAC_CR_MAMP1_0) /*!< Noise wave generation, unmask LFSR bits[5:0], for the selected DAC channel */
+#define LL_DAC_NOISE_LFSR_UNMASK_BITS6_0 ( DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 ) /*!< Noise wave generation, unmask LFSR bits[6:0], for the selected DAC channel */
+#define LL_DAC_NOISE_LFSR_UNMASK_BITS7_0 ( DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Noise wave generation, unmask LFSR bits[7:0], for the selected DAC channel */
+#define LL_DAC_NOISE_LFSR_UNMASK_BITS8_0 (DAC_CR_MAMP1_3 ) /*!< Noise wave generation, unmask LFSR bits[8:0], for the selected DAC channel */
+#define LL_DAC_NOISE_LFSR_UNMASK_BITS9_0 (DAC_CR_MAMP1_3 | DAC_CR_MAMP1_0) /*!< Noise wave generation, unmask LFSR bits[9:0], for the selected DAC channel */
+#define LL_DAC_NOISE_LFSR_UNMASK_BITS10_0 (DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 ) /*!< Noise wave generation, unmask LFSR bits[10:0], for the selected DAC channel */
+#define LL_DAC_NOISE_LFSR_UNMASK_BITS11_0 (DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Noise wave generation, unmask LFSR bits[11:0], for the selected DAC channel */
+/**
+ * @}
+ */
+
+/** @defgroup DAC_LL_EC_WAVE_TRIANGLE_AMPLITUDE DAC wave generation - Triangle amplitude
+ * @{
+ */
+#define LL_DAC_TRIANGLE_AMPLITUDE_1 0x00000000U /*!< Triangle wave generation, amplitude of 1 LSB of DAC output range, for the selected DAC channel */
+#define LL_DAC_TRIANGLE_AMPLITUDE_3 ( DAC_CR_MAMP1_0) /*!< Triangle wave generation, amplitude of 3 LSB of DAC output range, for the selected DAC channel */
+#define LL_DAC_TRIANGLE_AMPLITUDE_7 ( DAC_CR_MAMP1_1 ) /*!< Triangle wave generation, amplitude of 7 LSB of DAC output range, for the selected DAC channel */
+#define LL_DAC_TRIANGLE_AMPLITUDE_15 ( DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Triangle wave generation, amplitude of 15 LSB of DAC output range, for the selected DAC channel */
+#define LL_DAC_TRIANGLE_AMPLITUDE_31 ( DAC_CR_MAMP1_2 ) /*!< Triangle wave generation, amplitude of 31 LSB of DAC output range, for the selected DAC channel */
+#define LL_DAC_TRIANGLE_AMPLITUDE_63 ( DAC_CR_MAMP1_2 | DAC_CR_MAMP1_0) /*!< Triangle wave generation, amplitude of 63 LSB of DAC output range, for the selected DAC channel */
+#define LL_DAC_TRIANGLE_AMPLITUDE_127 ( DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 ) /*!< Triangle wave generation, amplitude of 127 LSB of DAC output range, for the selected DAC channel */
+#define LL_DAC_TRIANGLE_AMPLITUDE_255 ( DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Triangle wave generation, amplitude of 255 LSB of DAC output range, for the selected DAC channel */
+#define LL_DAC_TRIANGLE_AMPLITUDE_511 (DAC_CR_MAMP1_3 ) /*!< Triangle wave generation, amplitude of 512 LSB of DAC output range, for the selected DAC channel */
+#define LL_DAC_TRIANGLE_AMPLITUDE_1023 (DAC_CR_MAMP1_3 | DAC_CR_MAMP1_0) /*!< Triangle wave generation, amplitude of 1023 LSB of DAC output range, for the selected DAC channel */
+#define LL_DAC_TRIANGLE_AMPLITUDE_2047 (DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 ) /*!< Triangle wave generation, amplitude of 2047 LSB of DAC output range, for the selected DAC channel */
+#define LL_DAC_TRIANGLE_AMPLITUDE_4095 (DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Triangle wave generation, amplitude of 4095 LSB of DAC output range, for the selected DAC channel */
+/**
+ * @}
+ */
+
+/** @defgroup DAC_LL_EC_OUTPUT_BUFFER DAC channel output buffer
+ * @{
+ */
+#define LL_DAC_OUTPUT_BUFFER_ENABLE 0x00000000U /*!< The selected DAC channel output is buffered: higher drive current capability, but also higher current consumption */
+#define LL_DAC_OUTPUT_BUFFER_DISABLE (DAC_CR_BOFF1) /*!< The selected DAC channel output is not buffered: lower drive current capability, but also lower current consumption */
+/**
+ * @}
+ */
+
+
+/** @defgroup DAC_LL_EC_RESOLUTION DAC channel output resolution
+ * @{
+ */
+#define LL_DAC_RESOLUTION_12B 0x00000000U /*!< DAC channel resolution 12 bits */
+#define LL_DAC_RESOLUTION_8B 0x00000002U /*!< DAC channel resolution 8 bits */
+/**
+ * @}
+ */
+
+/** @defgroup DAC_LL_EC_REGISTERS DAC registers compliant with specific purpose
+ * @{
+ */
+/* List of DAC registers intended to be used (most commonly) with */
+/* DMA transfer. */
+/* Refer to function @ref LL_DAC_DMA_GetRegAddr(). */
+#define LL_DAC_DMA_REG_DATA_12BITS_RIGHT_ALIGNED DAC_REG_DHR12RX_REGOFFSET_BITOFFSET_POS /*!< DAC channel data holding register 12 bits right aligned */
+#define LL_DAC_DMA_REG_DATA_12BITS_LEFT_ALIGNED DAC_REG_DHR12LX_REGOFFSET_BITOFFSET_POS /*!< DAC channel data holding register 12 bits left aligned */
+#define LL_DAC_DMA_REG_DATA_8BITS_RIGHT_ALIGNED DAC_REG_DHR8RX_REGOFFSET_BITOFFSET_POS /*!< DAC channel data holding register 8 bits right aligned */
+/**
+ * @}
+ */
+
+/** @defgroup DAC_LL_EC_HW_DELAYS Definitions of DAC hardware constraints delays
+ * @note Only DAC IP HW delays are defined in DAC LL driver driver,
+ * not timeout values.
+ * For details on delays values, refer to descriptions in source code
+ * above each literal definition.
+ * @{
+ */
+
+/* Delay for DAC channel voltage settling time from DAC channel startup */
+/* (transition from disable to enable). */
+/* Note: DAC channel startup time depends on board application environment: */
+/* impedance connected to DAC channel output. */
+/* The delay below is specified under conditions: */
+/* - voltage maximum transition (lowest to highest value) */
+/* - until voltage reaches final value +-1LSB */
+/* - DAC channel output buffer enabled */
+/* - load impedance of 5kOhm (min), 50pF (max) */
+/* Literal set to maximum value (refer to device datasheet, */
+/* parameter "tWAKEUP"). */
+/* Unit: us */
+#define LL_DAC_DELAY_STARTUP_VOLTAGE_SETTLING_US 15U /*!< Delay for DAC channel voltage settling time from DAC channel startup (transition from disable to enable) */
+
+/* Delay for DAC channel voltage settling time. */
+/* Note: DAC channel startup time depends on board application environment: */
+/* impedance connected to DAC channel output. */
+/* The delay below is specified under conditions: */
+/* - voltage maximum transition (lowest to highest value) */
+/* - until voltage reaches final value +-1LSB */
+/* - DAC channel output buffer enabled */
+/* - load impedance of 5kOhm min, 50pF max */
+/* Literal set to maximum value (refer to device datasheet, */
+/* parameter "tSETTLING"). */
+/* Unit: us */
+#define LL_DAC_DELAY_VOLTAGE_SETTLING_US 12U /*!< Delay for DAC channel voltage settling time */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup DAC_LL_Exported_Macros DAC Exported Macros
+ * @{
+ */
+
+/** @defgroup DAC_LL_EM_WRITE_READ Common write and read registers macros
+ * @{
+ */
+
+/**
+ * @brief Write a value in DAC register
+ * @param __INSTANCE__ DAC Instance
+ * @param __REG__ Register to be written
+ * @param __VALUE__ Value to be written in the register
+ * @retval None
+ */
+#define LL_DAC_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__))
+
+/**
+ * @brief Read a value in DAC register
+ * @param __INSTANCE__ DAC Instance
+ * @param __REG__ Register to be read
+ * @retval Register value
+ */
+#define LL_DAC_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__)
+
+/**
+ * @}
+ */
+
+/** @defgroup DAC_LL_EM_HELPER_MACRO DAC helper macro
+ * @{
+ */
+
+/**
+ * @brief Helper macro to get DAC channel number in decimal format
+ * from literals LL_DAC_CHANNEL_x.
+ * Example:
+ * __LL_DAC_CHANNEL_TO_DECIMAL_NB(LL_DAC_CHANNEL_1)
+ * will return decimal number "1".
+ * @note The input can be a value from functions where a channel
+ * number is returned.
+ * @param __CHANNEL__ This parameter can be one of the following values:
+ * @arg @ref LL_DAC_CHANNEL_1
+ * @arg @ref LL_DAC_CHANNEL_2 (1)
+ *
+ * (1) On this STM32 serie, parameter not available on all devices.
+ * Refer to device datasheet for channels availability.
+ * @retval 1...2 (value "2" depending on DAC channel 2 availability)
+ */
+#define __LL_DAC_CHANNEL_TO_DECIMAL_NB(__CHANNEL__) \
+ ((__CHANNEL__) & DAC_SWTR_CHX_MASK)
+
+/**
+ * @brief Helper macro to get DAC channel in literal format LL_DAC_CHANNEL_x
+ * from number in decimal format.
+ * Example:
+ * __LL_DAC_DECIMAL_NB_TO_CHANNEL(1)
+ * will return a data equivalent to "LL_DAC_CHANNEL_1".
+ * @note If the input parameter does not correspond to a DAC channel,
+ * this macro returns value '0'.
+ * @param __DECIMAL_NB__ 1...2 (value "2" depending on DAC channel 2 availability)
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_DAC_CHANNEL_1
+ * @arg @ref LL_DAC_CHANNEL_2 (1)
+ *
+ * (1) On this STM32 serie, parameter not available on all devices.
+ * Refer to device datasheet for channels availability.
+ */
+#if defined(DAC_CHANNEL2_SUPPORT)
+#define __LL_DAC_DECIMAL_NB_TO_CHANNEL(__DECIMAL_NB__) \
+ (((__DECIMAL_NB__) == 1U) \
+ ? ( \
+ LL_DAC_CHANNEL_1 \
+ ) \
+ : \
+ (((__DECIMAL_NB__) == 2U) \
+ ? ( \
+ LL_DAC_CHANNEL_2 \
+ ) \
+ : \
+ ( \
+ 0 \
+ ) \
+ ) \
+ )
+#else
+#define __LL_DAC_DECIMAL_NB_TO_CHANNEL(__DECIMAL_NB__) \
+ (((__DECIMAL_NB__) == 1U) \
+ ? ( \
+ LL_DAC_CHANNEL_1 \
+ ) \
+ : \
+ ( \
+ 0 \
+ ) \
+ )
+#endif /* DAC_CHANNEL2_SUPPORT */
+
+/**
+ * @brief Helper macro to define the DAC conversion data full-scale digital
+ * value corresponding to the selected DAC resolution.
+ * @note DAC conversion data full-scale corresponds to voltage range
+ * determined by analog voltage references Vref+ and Vref-
+ * (refer to reference manual).
+ * @param __DAC_RESOLUTION__ This parameter can be one of the following values:
+ * @arg @ref LL_DAC_RESOLUTION_12B
+ * @arg @ref LL_DAC_RESOLUTION_8B
+ * @retval ADC conversion data equivalent voltage value (unit: mVolt)
+ */
+#define __LL_DAC_DIGITAL_SCALE(__DAC_RESOLUTION__) \
+ ((0x00000FFFU) >> ((__DAC_RESOLUTION__) << 1U))
+
+/**
+ * @brief Helper macro to calculate the DAC conversion data (unit: digital
+ * value) corresponding to a voltage (unit: mVolt).
+ * @note This helper macro is intended to provide input data in voltage
+ * rather than digital value,
+ * to be used with LL DAC functions such as
+ * @ref LL_DAC_ConvertData12RightAligned().
+ * @note Analog reference voltage (Vref+) must be either known from
+ * user board environment or can be calculated using ADC measurement
+ * and ADC helper macro @ref __LL_ADC_CALC_VREFANALOG_VOLTAGE().
+ * @param __VREFANALOG_VOLTAGE__ Analog reference voltage (unit: mV)
+ * @param __DAC_VOLTAGE__ Voltage to be generated by DAC channel
+ * (unit: mVolt).
+ * @param __DAC_RESOLUTION__ This parameter can be one of the following values:
+ * @arg @ref LL_DAC_RESOLUTION_12B
+ * @arg @ref LL_DAC_RESOLUTION_8B
+ * @retval DAC conversion data (unit: digital value)
+ */
+#define __LL_DAC_CALC_VOLTAGE_TO_DATA(__VREFANALOG_VOLTAGE__,\
+ __DAC_VOLTAGE__,\
+ __DAC_RESOLUTION__) \
+ ((__DAC_VOLTAGE__) * __LL_DAC_DIGITAL_SCALE(__DAC_RESOLUTION__) \
+ / (__VREFANALOG_VOLTAGE__) \
+ )
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup DAC_LL_Exported_Functions DAC Exported Functions
+ * @{
+ */
+/** @defgroup DAC_LL_EF_Configuration Configuration of DAC channels
+ * @{
+ */
+
+/**
+ * @brief Set the conversion trigger source for the selected DAC channel.
+ * @note For conversion trigger source to be effective, DAC trigger
+ * must be enabled using function @ref LL_DAC_EnableTrigger().
+ * @note To set conversion trigger source, DAC channel must be disabled.
+ * Otherwise, the setting is discarded.
+ * @note Availability of parameters of trigger sources from timer
+ * depends on timers availability on the selected device.
+ * @rmtoll CR TSEL1 LL_DAC_SetTriggerSource\n
+ * CR TSEL2 LL_DAC_SetTriggerSource
+ * @param DACx DAC instance
+ * @param DAC_Channel This parameter can be one of the following values:
+ * @arg @ref LL_DAC_CHANNEL_1
+ * @arg @ref LL_DAC_CHANNEL_2 (1)
+ *
+ * (1) On this STM32 serie, parameter not available on all devices.
+ * Refer to device datasheet for channels availability.
+ * @param TriggerSource This parameter can be one of the following values:
+ * @arg @ref LL_DAC_TRIG_SOFTWARE
+ * @arg @ref LL_DAC_TRIG_EXT_TIM2_TRGO
+ * @arg @ref LL_DAC_TRIG_EXT_TIM3_TRGO
+ * @arg @ref LL_DAC_TRIG_EXT_TIM4_TRGO
+ * @arg @ref LL_DAC_TRIG_EXT_TIM6_TRGO
+ * @arg @ref LL_DAC_TRIG_EXT_TIM7_TRGO
+ * @arg @ref LL_DAC_TRIG_EXT_TIM15_TRGO
+ * @arg @ref LL_DAC_TRIG_EXT_EXTI_LINE9
+ * @retval None
+ */
+__STATIC_INLINE void LL_DAC_SetTriggerSource(DAC_TypeDef *DACx, uint32_t DAC_Channel, uint32_t TriggerSource)
+{
+ MODIFY_REG(DACx->CR,
+ DAC_CR_TSEL1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK),
+ TriggerSource << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK));
+}
+
+/**
+ * @brief Get the conversion trigger source for the selected DAC channel.
+ * @note For conversion trigger source to be effective, DAC trigger
+ * must be enabled using function @ref LL_DAC_EnableTrigger().
+ * @note Availability of parameters of trigger sources from timer
+ * depends on timers availability on the selected device.
+ * @rmtoll CR TSEL1 LL_DAC_GetTriggerSource\n
+ * CR TSEL2 LL_DAC_GetTriggerSource
+ * @param DACx DAC instance
+ * @param DAC_Channel This parameter can be one of the following values:
+ * @arg @ref LL_DAC_CHANNEL_1
+ * @arg @ref LL_DAC_CHANNEL_2 (1)
+ *
+ * (1) On this STM32 serie, parameter not available on all devices.
+ * Refer to device datasheet for channels availability.
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_DAC_TRIG_SOFTWARE
+ * @arg @ref LL_DAC_TRIG_EXT_TIM2_TRGO
+ * @arg @ref LL_DAC_TRIG_EXT_TIM3_TRGO
+ * @arg @ref LL_DAC_TRIG_EXT_TIM4_TRGO
+ * @arg @ref LL_DAC_TRIG_EXT_TIM6_TRGO
+ * @arg @ref LL_DAC_TRIG_EXT_TIM7_TRGO
+ * @arg @ref LL_DAC_TRIG_EXT_TIM15_TRGO
+ * @arg @ref LL_DAC_TRIG_EXT_EXTI_LINE9
+ */
+__STATIC_INLINE uint32_t LL_DAC_GetTriggerSource(DAC_TypeDef *DACx, uint32_t DAC_Channel)
+{
+ return (uint32_t)(READ_BIT(DACx->CR, DAC_CR_TSEL1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK))
+ >> (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)
+ );
+}
+
+#if defined(DAC_CR_WAVE1)
+/**
+ * @brief Set the waveform automatic generation mode
+ * for the selected DAC channel.
+ * @rmtoll CR WAVE1 LL_DAC_SetWaveAutoGeneration\n
+ * CR WAVE2 LL_DAC_SetWaveAutoGeneration
+ * @param DACx DAC instance
+ * @param DAC_Channel This parameter can be one of the following values:
+ * @arg @ref LL_DAC_CHANNEL_1
+ * @arg @ref LL_DAC_CHANNEL_2 (1)
+ *
+ * (1) On this STM32 serie, parameter not available on all devices.
+ * Refer to device datasheet for channels availability.
+ * @param WaveAutoGeneration This parameter can be one of the following values:
+ * @arg @ref LL_DAC_WAVE_AUTO_GENERATION_NONE
+ * @arg @ref LL_DAC_WAVE_AUTO_GENERATION_NOISE
+ * @arg @ref LL_DAC_WAVE_AUTO_GENERATION_TRIANGLE
+ * @retval None
+ */
+__STATIC_INLINE void LL_DAC_SetWaveAutoGeneration(DAC_TypeDef *DACx, uint32_t DAC_Channel, uint32_t WaveAutoGeneration)
+{
+ MODIFY_REG(DACx->CR,
+ DAC_CR_WAVE1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK),
+ WaveAutoGeneration << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK));
+}
+
+/**
+ * @brief Get the waveform automatic generation mode
+ * for the selected DAC channel.
+ * @rmtoll CR WAVE1 LL_DAC_GetWaveAutoGeneration\n
+ * CR WAVE2 LL_DAC_GetWaveAutoGeneration
+ * @param DACx DAC instance
+ * @param DAC_Channel This parameter can be one of the following values:
+ * @arg @ref LL_DAC_CHANNEL_1
+ * @arg @ref LL_DAC_CHANNEL_2 (1)
+ *
+ * (1) On this STM32 serie, parameter not available on all devices.
+ * Refer to device datasheet for channels availability.
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_DAC_WAVE_AUTO_GENERATION_NONE
+ * @arg @ref LL_DAC_WAVE_AUTO_GENERATION_NOISE
+ * @arg @ref LL_DAC_WAVE_AUTO_GENERATION_TRIANGLE
+ */
+__STATIC_INLINE uint32_t LL_DAC_GetWaveAutoGeneration(DAC_TypeDef *DACx, uint32_t DAC_Channel)
+{
+ return (uint32_t)(READ_BIT(DACx->CR, DAC_CR_WAVE1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK))
+ >> (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)
+ );
+}
+
+/**
+ * @brief Set the noise waveform generation for the selected DAC channel:
+ * Noise mode and parameters LFSR (linear feedback shift register).
+ * @note For wave generation to be effective, DAC channel
+ * wave generation mode must be enabled using
+ * function @ref LL_DAC_SetWaveAutoGeneration().
+ * @note This setting can be set when the selected DAC channel is disabled
+ * (otherwise, the setting operation is ignored).
+ * @rmtoll CR MAMP1 LL_DAC_SetWaveNoiseLFSR\n
+ * CR MAMP2 LL_DAC_SetWaveNoiseLFSR
+ * @param DACx DAC instance
+ * @param DAC_Channel This parameter can be one of the following values:
+ * @arg @ref LL_DAC_CHANNEL_1
+ * @arg @ref LL_DAC_CHANNEL_2 (1)
+ *
+ * (1) On this STM32 serie, parameter not available on all devices.
+ * Refer to device datasheet for channels availability.
+ * @param NoiseLFSRMask This parameter can be one of the following values:
+ * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BIT0
+ * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS1_0
+ * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS2_0
+ * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS3_0
+ * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS4_0
+ * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS5_0
+ * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS6_0
+ * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS7_0
+ * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS8_0
+ * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS9_0
+ * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS10_0
+ * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS11_0
+ * @retval None
+ */
+__STATIC_INLINE void LL_DAC_SetWaveNoiseLFSR(DAC_TypeDef *DACx, uint32_t DAC_Channel, uint32_t NoiseLFSRMask)
+{
+ MODIFY_REG(DACx->CR,
+ DAC_CR_MAMP1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK),
+ NoiseLFSRMask << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK));
+}
+
+/**
+ * @brief Set the noise waveform generation for the selected DAC channel:
+ * Noise mode and parameters LFSR (linear feedback shift register).
+ * @rmtoll CR MAMP1 LL_DAC_GetWaveNoiseLFSR\n
+ * CR MAMP2 LL_DAC_GetWaveNoiseLFSR
+ * @param DACx DAC instance
+ * @param DAC_Channel This parameter can be one of the following values:
+ * @arg @ref LL_DAC_CHANNEL_1
+ * @arg @ref LL_DAC_CHANNEL_2 (1)
+ *
+ * (1) On this STM32 serie, parameter not available on all devices.
+ * Refer to device datasheet for channels availability.
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BIT0
+ * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS1_0
+ * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS2_0
+ * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS3_0
+ * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS4_0
+ * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS5_0
+ * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS6_0
+ * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS7_0
+ * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS8_0
+ * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS9_0
+ * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS10_0
+ * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS11_0
+ */
+__STATIC_INLINE uint32_t LL_DAC_GetWaveNoiseLFSR(DAC_TypeDef *DACx, uint32_t DAC_Channel)
+{
+ return (uint32_t)(READ_BIT(DACx->CR, DAC_CR_MAMP1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK))
+ >> (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)
+ );
+}
+
+/**
+ * @brief Set the triangle waveform generation for the selected DAC channel:
+ * triangle mode and amplitude.
+ * @note For wave generation to be effective, DAC channel
+ * wave generation mode must be enabled using
+ * function @ref LL_DAC_SetWaveAutoGeneration().
+ * @note This setting can be set when the selected DAC channel is disabled
+ * (otherwise, the setting operation is ignored).
+ * @rmtoll CR MAMP1 LL_DAC_SetWaveTriangleAmplitude\n
+ * CR MAMP2 LL_DAC_SetWaveTriangleAmplitude
+ * @param DACx DAC instance
+ * @param DAC_Channel This parameter can be one of the following values:
+ * @arg @ref LL_DAC_CHANNEL_1
+ * @arg @ref LL_DAC_CHANNEL_2 (1)
+ *
+ * (1) On this STM32 serie, parameter not available on all devices.
+ * Refer to device datasheet for channels availability.
+ * @param TriangleAmplitude This parameter can be one of the following values:
+ * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_1
+ * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_3
+ * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_7
+ * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_15
+ * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_31
+ * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_63
+ * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_127
+ * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_255
+ * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_511
+ * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_1023
+ * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_2047
+ * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_4095
+ * @retval None
+ */
+__STATIC_INLINE void LL_DAC_SetWaveTriangleAmplitude(DAC_TypeDef *DACx, uint32_t DAC_Channel, uint32_t TriangleAmplitude)
+{
+ MODIFY_REG(DACx->CR,
+ DAC_CR_MAMP1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK),
+ TriangleAmplitude << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK));
+}
+
+/**
+ * @brief Set the triangle waveform generation for the selected DAC channel:
+ * triangle mode and amplitude.
+ * @rmtoll CR MAMP1 LL_DAC_GetWaveTriangleAmplitude\n
+ * CR MAMP2 LL_DAC_GetWaveTriangleAmplitude
+ * @param DACx DAC instance
+ * @param DAC_Channel This parameter can be one of the following values:
+ * @arg @ref LL_DAC_CHANNEL_1
+ * @arg @ref LL_DAC_CHANNEL_2 (1)
+ *
+ * (1) On this STM32 serie, parameter not available on all devices.
+ * Refer to device datasheet for channels availability.
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_1
+ * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_3
+ * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_7
+ * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_15
+ * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_31
+ * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_63
+ * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_127
+ * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_255
+ * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_511
+ * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_1023
+ * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_2047
+ * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_4095
+ */
+__STATIC_INLINE uint32_t LL_DAC_GetWaveTriangleAmplitude(DAC_TypeDef *DACx, uint32_t DAC_Channel)
+{
+ return (uint32_t)(READ_BIT(DACx->CR, DAC_CR_MAMP1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK))
+ >> (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)
+ );
+}
+#endif
+
+/**
+ * @brief Set the output buffer for the selected DAC channel.
+ * @rmtoll CR BOFF1 LL_DAC_SetOutputBuffer\n
+ * CR BOFF2 LL_DAC_SetOutputBuffer
+ * @param DACx DAC instance
+ * @param DAC_Channel This parameter can be one of the following values:
+ * @arg @ref LL_DAC_CHANNEL_1
+ * @arg @ref LL_DAC_CHANNEL_2 (1)
+ *
+ * (1) On this STM32 serie, parameter not available on all devices.
+ * Refer to device datasheet for channels availability.
+ * @param OutputBuffer This parameter can be one of the following values:
+ * @arg @ref LL_DAC_OUTPUT_BUFFER_ENABLE
+ * @arg @ref LL_DAC_OUTPUT_BUFFER_DISABLE
+ * @retval None
+ */
+__STATIC_INLINE void LL_DAC_SetOutputBuffer(DAC_TypeDef *DACx, uint32_t DAC_Channel, uint32_t OutputBuffer)
+{
+ MODIFY_REG(DACx->CR,
+ DAC_CR_BOFF1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK),
+ OutputBuffer << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK));
+}
+
+/**
+ * @brief Get the output buffer state for the selected DAC channel.
+ * @rmtoll CR BOFF1 LL_DAC_GetOutputBuffer\n
+ * CR BOFF2 LL_DAC_GetOutputBuffer
+ * @param DACx DAC instance
+ * @param DAC_Channel This parameter can be one of the following values:
+ * @arg @ref LL_DAC_CHANNEL_1
+ * @arg @ref LL_DAC_CHANNEL_2 (1)
+ *
+ * (1) On this STM32 serie, parameter not available on all devices.
+ * Refer to device datasheet for channels availability.
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_DAC_OUTPUT_BUFFER_ENABLE
+ * @arg @ref LL_DAC_OUTPUT_BUFFER_DISABLE
+ */
+__STATIC_INLINE uint32_t LL_DAC_GetOutputBuffer(DAC_TypeDef *DACx, uint32_t DAC_Channel)
+{
+ return (uint32_t)(READ_BIT(DACx->CR, DAC_CR_BOFF1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK))
+ >> (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)
+ );
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup DAC_LL_EF_DMA_Management DMA Management
+ * @{
+ */
+
+/**
+ * @brief Enable DAC DMA transfer request of the selected channel.
+ * @note To configure DMA source address (peripheral address),
+ * use function @ref LL_DAC_DMA_GetRegAddr().
+ * @rmtoll CR DMAEN1 LL_DAC_EnableDMAReq\n
+ * CR DMAEN2 LL_DAC_EnableDMAReq
+ * @param DACx DAC instance
+ * @param DAC_Channel This parameter can be one of the following values:
+ * @arg @ref LL_DAC_CHANNEL_1
+ * @arg @ref LL_DAC_CHANNEL_2 (1)
+ *
+ * (1) On this STM32 serie, parameter not available on all devices.
+ * Refer to device datasheet for channels availability.
+ * @retval None
+ */
+__STATIC_INLINE void LL_DAC_EnableDMAReq(DAC_TypeDef *DACx, uint32_t DAC_Channel)
+{
+ SET_BIT(DACx->CR,
+ DAC_CR_DMAEN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK));
+}
+
+/**
+ * @brief Disable DAC DMA transfer request of the selected channel.
+ * @note To configure DMA source address (peripheral address),
+ * use function @ref LL_DAC_DMA_GetRegAddr().
+ * @rmtoll CR DMAEN1 LL_DAC_DisableDMAReq\n
+ * CR DMAEN2 LL_DAC_DisableDMAReq
+ * @param DACx DAC instance
+ * @param DAC_Channel This parameter can be one of the following values:
+ * @arg @ref LL_DAC_CHANNEL_1
+ * @arg @ref LL_DAC_CHANNEL_2 (1)
+ *
+ * (1) On this STM32 serie, parameter not available on all devices.
+ * Refer to device datasheet for channels availability.
+ * @retval None
+ */
+__STATIC_INLINE void LL_DAC_DisableDMAReq(DAC_TypeDef *DACx, uint32_t DAC_Channel)
+{
+ CLEAR_BIT(DACx->CR,
+ DAC_CR_DMAEN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK));
+}
+
+/**
+ * @brief Get DAC DMA transfer request state of the selected channel.
+ * (0: DAC DMA transfer request is disabled, 1: DAC DMA transfer request is enabled)
+ * @rmtoll CR DMAEN1 LL_DAC_IsDMAReqEnabled\n
+ * CR DMAEN2 LL_DAC_IsDMAReqEnabled
+ * @param DACx DAC instance
+ * @param DAC_Channel This parameter can be one of the following values:
+ * @arg @ref LL_DAC_CHANNEL_1
+ * @arg @ref LL_DAC_CHANNEL_2 (1)
+ *
+ * (1) On this STM32 serie, parameter not available on all devices.
+ * Refer to device datasheet for channels availability.
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DAC_IsDMAReqEnabled(DAC_TypeDef *DACx, uint32_t DAC_Channel)
+{
+ return (READ_BIT(DACx->CR,
+ DAC_CR_DMAEN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK))
+ == (DAC_CR_DMAEN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)));
+}
+
+/**
+ * @brief Function to help to configure DMA transfer to DAC: retrieve the
+ * DAC register address from DAC instance and a list of DAC registers
+ * intended to be used (most commonly) with DMA transfer.
+ * @note These DAC registers are data holding registers:
+ * when DAC conversion is requested, DAC generates a DMA transfer
+ * request to have data available in DAC data holding registers.
+ * @note This macro is intended to be used with LL DMA driver, refer to
+ * function "LL_DMA_ConfigAddresses()".
+ * Example:
+ * LL_DMA_ConfigAddresses(DMA1,
+ * LL_DMA_CHANNEL_1,
+ * (uint32_t)&< array or variable >,
+ * LL_DAC_DMA_GetRegAddr(DAC1, LL_DAC_CHANNEL_1, LL_DAC_DMA_REG_DATA_12BITS_RIGHT_ALIGNED),
+ * LL_DMA_DIRECTION_MEMORY_TO_PERIPH);
+ * @rmtoll DHR12R1 DACC1DHR LL_DAC_DMA_GetRegAddr\n
+ * DHR12L1 DACC1DHR LL_DAC_DMA_GetRegAddr\n
+ * DHR8R1 DACC1DHR LL_DAC_DMA_GetRegAddr\n
+ * DHR12R2 DACC2DHR LL_DAC_DMA_GetRegAddr\n
+ * DHR12L2 DACC2DHR LL_DAC_DMA_GetRegAddr\n
+ * DHR8R2 DACC2DHR LL_DAC_DMA_GetRegAddr
+ * @param DACx DAC instance
+ * @param DAC_Channel This parameter can be one of the following values:
+ * @arg @ref LL_DAC_CHANNEL_1
+ * @arg @ref LL_DAC_CHANNEL_2 (1)
+ *
+ * (1) On this STM32 serie, parameter not available on all devices.
+ * Refer to device datasheet for channels availability.
+ * @param Register This parameter can be one of the following values:
+ * @arg @ref LL_DAC_DMA_REG_DATA_12BITS_RIGHT_ALIGNED
+ * @arg @ref LL_DAC_DMA_REG_DATA_12BITS_LEFT_ALIGNED
+ * @arg @ref LL_DAC_DMA_REG_DATA_8BITS_RIGHT_ALIGNED
+ * @retval DAC register address
+ */
+__STATIC_INLINE uint32_t LL_DAC_DMA_GetRegAddr(DAC_TypeDef *DACx, uint32_t DAC_Channel, uint32_t Register)
+{
+ /* Retrieve address of register DHR12Rx, DHR12Lx or DHR8Rx depending on */
+ /* DAC channel selected. */
+ return ((uint32_t)(__DAC_PTR_REG_OFFSET((DACx)->DHR12R1, ((DAC_Channel >> Register) & DAC_REG_REGOFFSET_MASK_POSBIT0))));
+}
+/**
+ * @}
+ */
+
+/** @defgroup DAC_LL_EF_Operation Operation on DAC channels
+ * @{
+ */
+
+/**
+ * @brief Enable DAC selected channel.
+ * @rmtoll CR EN1 LL_DAC_Enable\n
+ * CR EN2 LL_DAC_Enable
+ * @note After enable from off state, DAC channel requires a delay
+ * for output voltage to reach accuracy +/- 1 LSB.
+ * Refer to device datasheet, parameter "tWAKEUP".
+ * @param DACx DAC instance
+ * @param DAC_Channel This parameter can be one of the following values:
+ * @arg @ref LL_DAC_CHANNEL_1
+ * @arg @ref LL_DAC_CHANNEL_2 (1)
+ *
+ * (1) On this STM32 serie, parameter not available on all devices.
+ * Refer to device datasheet for channels availability.
+ * @retval None
+ */
+__STATIC_INLINE void LL_DAC_Enable(DAC_TypeDef *DACx, uint32_t DAC_Channel)
+{
+ SET_BIT(DACx->CR,
+ DAC_CR_EN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK));
+}
+
+/**
+ * @brief Disable DAC selected channel.
+ * @rmtoll CR EN1 LL_DAC_Disable\n
+ * CR EN2 LL_DAC_Disable
+ * @param DACx DAC instance
+ * @param DAC_Channel This parameter can be one of the following values:
+ * @arg @ref LL_DAC_CHANNEL_1
+ * @arg @ref LL_DAC_CHANNEL_2 (1)
+ *
+ * (1) On this STM32 serie, parameter not available on all devices.
+ * Refer to device datasheet for channels availability.
+ * @retval None
+ */
+__STATIC_INLINE void LL_DAC_Disable(DAC_TypeDef *DACx, uint32_t DAC_Channel)
+{
+ CLEAR_BIT(DACx->CR,
+ DAC_CR_EN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK));
+}
+
+/**
+ * @brief Get DAC enable state of the selected channel.
+ * (0: DAC channel is disabled, 1: DAC channel is enabled)
+ * @rmtoll CR EN1 LL_DAC_IsEnabled\n
+ * CR EN2 LL_DAC_IsEnabled
+ * @param DACx DAC instance
+ * @param DAC_Channel This parameter can be one of the following values:
+ * @arg @ref LL_DAC_CHANNEL_1
+ * @arg @ref LL_DAC_CHANNEL_2 (1)
+ *
+ * (1) On this STM32 serie, parameter not available on all devices.
+ * Refer to device datasheet for channels availability.
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DAC_IsEnabled(DAC_TypeDef *DACx, uint32_t DAC_Channel)
+{
+ return (READ_BIT(DACx->CR,
+ DAC_CR_EN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK))
+ == (DAC_CR_EN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)));
+}
+
+/**
+ * @brief Enable DAC trigger of the selected channel.
+ * @note - If DAC trigger is disabled, DAC conversion is performed
+ * automatically once the data holding register is updated,
+ * using functions "LL_DAC_ConvertData{8; 12}{Right; Left} Aligned()":
+ * @ref LL_DAC_ConvertData12RightAligned(), ...
+ * - If DAC trigger is enabled, DAC conversion is performed
+ * only when a hardware of software trigger event is occurring.
+ * Select trigger source using
+ * function @ref LL_DAC_SetTriggerSource().
+ * @rmtoll CR TEN1 LL_DAC_EnableTrigger\n
+ * CR TEN2 LL_DAC_EnableTrigger
+ * @param DACx DAC instance
+ * @param DAC_Channel This parameter can be one of the following values:
+ * @arg @ref LL_DAC_CHANNEL_1
+ * @arg @ref LL_DAC_CHANNEL_2 (1)
+ *
+ * (1) On this STM32 serie, parameter not available on all devices.
+ * Refer to device datasheet for channels availability.
+ * @retval None
+ */
+__STATIC_INLINE void LL_DAC_EnableTrigger(DAC_TypeDef *DACx, uint32_t DAC_Channel)
+{
+ SET_BIT(DACx->CR,
+ DAC_CR_TEN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK));
+}
+
+/**
+ * @brief Disable DAC trigger of the selected channel.
+ * @rmtoll CR TEN1 LL_DAC_DisableTrigger\n
+ * CR TEN2 LL_DAC_DisableTrigger
+ * @param DACx DAC instance
+ * @param DAC_Channel This parameter can be one of the following values:
+ * @arg @ref LL_DAC_CHANNEL_1
+ * @arg @ref LL_DAC_CHANNEL_2 (1)
+ *
+ * (1) On this STM32 serie, parameter not available on all devices.
+ * Refer to device datasheet for channels availability.
+ * @retval None
+ */
+__STATIC_INLINE void LL_DAC_DisableTrigger(DAC_TypeDef *DACx, uint32_t DAC_Channel)
+{
+ CLEAR_BIT(DACx->CR,
+ DAC_CR_TEN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK));
+}
+
+/**
+ * @brief Get DAC trigger state of the selected channel.
+ * (0: DAC trigger is disabled, 1: DAC trigger is enabled)
+ * @rmtoll CR TEN1 LL_DAC_IsTriggerEnabled\n
+ * CR TEN2 LL_DAC_IsTriggerEnabled
+ * @param DACx DAC instance
+ * @param DAC_Channel This parameter can be one of the following values:
+ * @arg @ref LL_DAC_CHANNEL_1
+ * @arg @ref LL_DAC_CHANNEL_2 (1)
+ *
+ * (1) On this STM32 serie, parameter not available on all devices.
+ * Refer to device datasheet for channels availability.
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DAC_IsTriggerEnabled(DAC_TypeDef *DACx, uint32_t DAC_Channel)
+{
+ return (READ_BIT(DACx->CR,
+ DAC_CR_TEN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK))
+ == (DAC_CR_TEN1 << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)));
+}
+
+/**
+ * @brief Trig DAC conversion by software for the selected DAC channel.
+ * @note Preliminarily, DAC trigger must be set to software trigger
+ * using function @ref LL_DAC_SetTriggerSource()
+ * with parameter "LL_DAC_TRIGGER_SOFTWARE".
+ * and DAC trigger must be enabled using
+ * function @ref LL_DAC_EnableTrigger().
+ * @note For devices featuring DAC with 2 channels: this function
+ * can perform a SW start of both DAC channels simultaneously.
+ * Two channels can be selected as parameter.
+ * Example: (LL_DAC_CHANNEL_1 | LL_DAC_CHANNEL_2)
+ * @rmtoll SWTRIGR SWTRIG1 LL_DAC_TrigSWConversion\n
+ * SWTRIGR SWTRIG2 LL_DAC_TrigSWConversion
+ * @param DACx DAC instance
+ * @param DAC_Channel This parameter can a combination of the following values:
+ * @arg @ref LL_DAC_CHANNEL_1
+ * @arg @ref LL_DAC_CHANNEL_2 (1)
+ *
+ * (1) On this STM32 serie, parameter not available on all devices.
+ * Refer to device datasheet for channels availability.
+ * @retval None
+ */
+__STATIC_INLINE void LL_DAC_TrigSWConversion(DAC_TypeDef *DACx, uint32_t DAC_Channel)
+{
+ SET_BIT(DACx->SWTRIGR,
+ (DAC_Channel & DAC_SWTR_CHX_MASK));
+}
+
+/**
+ * @brief Set the data to be loaded in the data holding register
+ * in format 12 bits left alignment (LSB aligned on bit 0),
+ * for the selected DAC channel.
+ * @rmtoll DHR12R1 DACC1DHR LL_DAC_ConvertData12RightAligned\n
+ * DHR12R2 DACC2DHR LL_DAC_ConvertData12RightAligned
+ * @param DACx DAC instance
+ * @param DAC_Channel This parameter can be one of the following values:
+ * @arg @ref LL_DAC_CHANNEL_1
+ * @arg @ref LL_DAC_CHANNEL_2 (1)
+ *
+ * (1) On this STM32 serie, parameter not available on all devices.
+ * Refer to device datasheet for channels availability.
+ * @param Data Value between Min_Data=0x000 and Max_Data=0xFFF
+ * @retval None
+ */
+__STATIC_INLINE void LL_DAC_ConvertData12RightAligned(DAC_TypeDef *DACx, uint32_t DAC_Channel, uint32_t Data)
+{
+ __IO uint32_t *preg = __DAC_PTR_REG_OFFSET(DACx->DHR12R1, (DAC_Channel >> DAC_REG_DHR12RX_REGOFFSET_BITOFFSET_POS) & DAC_REG_REGOFFSET_MASK_POSBIT0);
+
+ MODIFY_REG(*preg,
+ DAC_DHR12R1_DACC1DHR,
+ Data);
+}
+
+/**
+ * @brief Set the data to be loaded in the data holding register
+ * in format 12 bits left alignment (MSB aligned on bit 15),
+ * for the selected DAC channel.
+ * @rmtoll DHR12L1 DACC1DHR LL_DAC_ConvertData12LeftAligned\n
+ * DHR12L2 DACC2DHR LL_DAC_ConvertData12LeftAligned
+ * @param DACx DAC instance
+ * @param DAC_Channel This parameter can be one of the following values:
+ * @arg @ref LL_DAC_CHANNEL_1
+ * @arg @ref LL_DAC_CHANNEL_2 (1)
+ *
+ * (1) On this STM32 serie, parameter not available on all devices.
+ * Refer to device datasheet for channels availability.
+ * @param Data Value between Min_Data=0x000 and Max_Data=0xFFF
+ * @retval None
+ */
+__STATIC_INLINE void LL_DAC_ConvertData12LeftAligned(DAC_TypeDef *DACx, uint32_t DAC_Channel, uint32_t Data)
+{
+ __IO uint32_t *preg = __DAC_PTR_REG_OFFSET(DACx->DHR12R1, (DAC_Channel >> DAC_REG_DHR12LX_REGOFFSET_BITOFFSET_POS) & DAC_REG_REGOFFSET_MASK_POSBIT0);
+
+ MODIFY_REG(*preg,
+ DAC_DHR12L1_DACC1DHR,
+ Data);
+}
+
+/**
+ * @brief Set the data to be loaded in the data holding register
+ * in format 8 bits left alignment (LSB aligned on bit 0),
+ * for the selected DAC channel.
+ * @rmtoll DHR8R1 DACC1DHR LL_DAC_ConvertData8RightAligned\n
+ * DHR8R2 DACC2DHR LL_DAC_ConvertData8RightAligned
+ * @param DACx DAC instance
+ * @param DAC_Channel This parameter can be one of the following values:
+ * @arg @ref LL_DAC_CHANNEL_1
+ * @arg @ref LL_DAC_CHANNEL_2 (1)
+ *
+ * (1) On this STM32 serie, parameter not available on all devices.
+ * Refer to device datasheet for channels availability.
+ * @param Data Value between Min_Data=0x00 and Max_Data=0xFF
+ * @retval None
+ */
+__STATIC_INLINE void LL_DAC_ConvertData8RightAligned(DAC_TypeDef *DACx, uint32_t DAC_Channel, uint32_t Data)
+{
+ __IO uint32_t *preg = __DAC_PTR_REG_OFFSET(DACx->DHR12R1, (DAC_Channel >> DAC_REG_DHR8RX_REGOFFSET_BITOFFSET_POS) & DAC_REG_REGOFFSET_MASK_POSBIT0);
+
+ MODIFY_REG(*preg,
+ DAC_DHR8R1_DACC1DHR,
+ Data);
+}
+
+#if defined(DAC_CHANNEL2_SUPPORT)
+/**
+ * @brief Set the data to be loaded in the data holding register
+ * in format 12 bits left alignment (LSB aligned on bit 0),
+ * for both DAC channels.
+ * @rmtoll DHR12RD DACC1DHR LL_DAC_ConvertDualData12RightAligned\n
+ * DHR12RD DACC2DHR LL_DAC_ConvertDualData12RightAligned
+ * @param DACx DAC instance
+ * @param DataChannel1 Value between Min_Data=0x000 and Max_Data=0xFFF
+ * @param DataChannel2 Value between Min_Data=0x000 and Max_Data=0xFFF
+ * @retval None
+ */
+__STATIC_INLINE void LL_DAC_ConvertDualData12RightAligned(DAC_TypeDef *DACx, uint32_t DataChannel1, uint32_t DataChannel2)
+{
+ MODIFY_REG(DACx->DHR12RD,
+ (DAC_DHR12RD_DACC2DHR | DAC_DHR12RD_DACC1DHR),
+ ((DataChannel2 << DAC_DHR12RD_DACC2DHR_BITOFFSET_POS) | DataChannel1));
+}
+
+/**
+ * @brief Set the data to be loaded in the data holding register
+ * in format 12 bits left alignment (MSB aligned on bit 15),
+ * for both DAC channels.
+ * @rmtoll DHR12LD DACC1DHR LL_DAC_ConvertDualData12LeftAligned\n
+ * DHR12LD DACC2DHR LL_DAC_ConvertDualData12LeftAligned
+ * @param DACx DAC instance
+ * @param DataChannel1 Value between Min_Data=0x000 and Max_Data=0xFFF
+ * @param DataChannel2 Value between Min_Data=0x000 and Max_Data=0xFFF
+ * @retval None
+ */
+__STATIC_INLINE void LL_DAC_ConvertDualData12LeftAligned(DAC_TypeDef *DACx, uint32_t DataChannel1, uint32_t DataChannel2)
+{
+ /* Note: Data of DAC channel 2 shift value subtracted of 4 because */
+ /* data on 16 bits and DAC channel 2 bits field is on the 12 MSB, */
+ /* the 4 LSB must be taken into account for the shift value. */
+ MODIFY_REG(DACx->DHR12LD,
+ (DAC_DHR12LD_DACC2DHR | DAC_DHR12LD_DACC1DHR),
+ ((DataChannel2 << (DAC_DHR12LD_DACC2DHR_BITOFFSET_POS - 4U)) | DataChannel1));
+}
+
+/**
+ * @brief Set the data to be loaded in the data holding register
+ * in format 8 bits left alignment (LSB aligned on bit 0),
+ * for both DAC channels.
+ * @rmtoll DHR8RD DACC1DHR LL_DAC_ConvertDualData8RightAligned\n
+ * DHR8RD DACC2DHR LL_DAC_ConvertDualData8RightAligned
+ * @param DACx DAC instance
+ * @param DataChannel1 Value between Min_Data=0x00 and Max_Data=0xFF
+ * @param DataChannel2 Value between Min_Data=0x00 and Max_Data=0xFF
+ * @retval None
+ */
+__STATIC_INLINE void LL_DAC_ConvertDualData8RightAligned(DAC_TypeDef *DACx, uint32_t DataChannel1, uint32_t DataChannel2)
+{
+ MODIFY_REG(DACx->DHR8RD,
+ (DAC_DHR8RD_DACC2DHR | DAC_DHR8RD_DACC1DHR),
+ ((DataChannel2 << DAC_DHR8RD_DACC2DHR_BITOFFSET_POS) | DataChannel1));
+}
+
+#endif /* DAC_CHANNEL2_SUPPORT */
+/**
+ * @brief Retrieve output data currently generated for the selected DAC channel.
+ * @note Whatever alignment and resolution settings
+ * (using functions "LL_DAC_ConvertData{8; 12}{Right; Left} Aligned()":
+ * @ref LL_DAC_ConvertData12RightAligned(), ...),
+ * output data format is 12 bits right aligned (LSB aligned on bit 0).
+ * @rmtoll DOR1 DACC1DOR LL_DAC_RetrieveOutputData\n
+ * DOR2 DACC2DOR LL_DAC_RetrieveOutputData
+ * @param DACx DAC instance
+ * @param DAC_Channel This parameter can be one of the following values:
+ * @arg @ref LL_DAC_CHANNEL_1
+ * @arg @ref LL_DAC_CHANNEL_2 (1)
+ *
+ * (1) On this STM32 serie, parameter not available on all devices.
+ * Refer to device datasheet for channels availability.
+ * @retval Value between Min_Data=0x000 and Max_Data=0xFFF
+ */
+__STATIC_INLINE uint32_t LL_DAC_RetrieveOutputData(DAC_TypeDef *DACx, uint32_t DAC_Channel)
+{
+ __IO uint32_t *preg = __DAC_PTR_REG_OFFSET(DACx->DOR1, (DAC_Channel >> DAC_REG_DORX_REGOFFSET_BITOFFSET_POS) & DAC_REG_REGOFFSET_MASK_POSBIT0);
+
+ return (uint16_t) READ_BIT(*preg, DAC_DOR1_DACC1DOR);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup DAC_LL_EF_FLAG_Management FLAG Management
+ * @{
+ */
+/**
+ * @brief Get DAC underrun flag for DAC channel 1
+ * @rmtoll SR DMAUDR1 LL_DAC_IsActiveFlag_DMAUDR1
+ * @param DACx DAC instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DAC_IsActiveFlag_DMAUDR1(DAC_TypeDef *DACx)
+{
+ return (READ_BIT(DACx->SR, LL_DAC_FLAG_DMAUDR1) == (LL_DAC_FLAG_DMAUDR1));
+}
+
+#if defined(DAC_CHANNEL2_SUPPORT)
+/**
+ * @brief Get DAC underrun flag for DAC channel 2
+ * @rmtoll SR DMAUDR2 LL_DAC_IsActiveFlag_DMAUDR2
+ * @param DACx DAC instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DAC_IsActiveFlag_DMAUDR2(DAC_TypeDef *DACx)
+{
+ return (READ_BIT(DACx->SR, LL_DAC_FLAG_DMAUDR2) == (LL_DAC_FLAG_DMAUDR2));
+}
+#endif /* DAC_CHANNEL2_SUPPORT */
+
+/**
+ * @brief Clear DAC underrun flag for DAC channel 1
+ * @rmtoll SR DMAUDR1 LL_DAC_ClearFlag_DMAUDR1
+ * @param DACx DAC instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DAC_ClearFlag_DMAUDR1(DAC_TypeDef *DACx)
+{
+ WRITE_REG(DACx->SR, LL_DAC_FLAG_DMAUDR1);
+}
+
+#if defined(DAC_CHANNEL2_SUPPORT)
+/**
+ * @brief Clear DAC underrun flag for DAC channel 2
+ * @rmtoll SR DMAUDR2 LL_DAC_ClearFlag_DMAUDR2
+ * @param DACx DAC instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DAC_ClearFlag_DMAUDR2(DAC_TypeDef *DACx)
+{
+ WRITE_REG(DACx->SR, LL_DAC_FLAG_DMAUDR2);
+}
+#endif /* DAC_CHANNEL2_SUPPORT */
+
+/**
+ * @}
+ */
+
+/** @defgroup DAC_LL_EF_IT_Management IT management
+ * @{
+ */
+
+/**
+ * @brief Enable DMA underrun interrupt for DAC channel 1
+ * @rmtoll CR DMAUDRIE1 LL_DAC_EnableIT_DMAUDR1
+ * @param DACx DAC instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DAC_EnableIT_DMAUDR1(DAC_TypeDef *DACx)
+{
+ SET_BIT(DACx->CR, LL_DAC_IT_DMAUDRIE1);
+}
+
+#if defined(DAC_CHANNEL2_SUPPORT)
+/**
+ * @brief Enable DMA underrun interrupt for DAC channel 2
+ * @rmtoll CR DMAUDRIE2 LL_DAC_EnableIT_DMAUDR2
+ * @param DACx DAC instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DAC_EnableIT_DMAUDR2(DAC_TypeDef *DACx)
+{
+ SET_BIT(DACx->CR, LL_DAC_IT_DMAUDRIE2);
+}
+#endif /* DAC_CHANNEL2_SUPPORT */
+
+/**
+ * @brief Disable DMA underrun interrupt for DAC channel 1
+ * @rmtoll CR DMAUDRIE1 LL_DAC_DisableIT_DMAUDR1
+ * @param DACx DAC instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DAC_DisableIT_DMAUDR1(DAC_TypeDef *DACx)
+{
+ CLEAR_BIT(DACx->CR, LL_DAC_IT_DMAUDRIE1);
+}
+
+#if defined(DAC_CHANNEL2_SUPPORT)
+/**
+ * @brief Disable DMA underrun interrupt for DAC channel 2
+ * @rmtoll CR DMAUDRIE2 LL_DAC_DisableIT_DMAUDR2
+ * @param DACx DAC instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DAC_DisableIT_DMAUDR2(DAC_TypeDef *DACx)
+{
+ CLEAR_BIT(DACx->CR, LL_DAC_IT_DMAUDRIE2);
+}
+#endif /* DAC_CHANNEL2_SUPPORT */
+
+/**
+ * @brief Get DMA underrun interrupt for DAC channel 1
+ * @rmtoll CR DMAUDRIE1 LL_DAC_IsEnabledIT_DMAUDR1
+ * @param DACx DAC instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DAC_IsEnabledIT_DMAUDR1(DAC_TypeDef *DACx)
+{
+ return (READ_BIT(DACx->CR, LL_DAC_IT_DMAUDRIE1) == (LL_DAC_IT_DMAUDRIE1));
+}
+
+#if defined(DAC_CHANNEL2_SUPPORT)
+/**
+ * @brief Get DMA underrun interrupt for DAC channel 2
+ * @rmtoll CR DMAUDRIE2 LL_DAC_IsEnabledIT_DMAUDR2
+ * @param DACx DAC instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DAC_IsEnabledIT_DMAUDR2(DAC_TypeDef *DACx)
+{
+ return (READ_BIT(DACx->CR, LL_DAC_IT_DMAUDRIE2) == (LL_DAC_IT_DMAUDRIE2));
+}
+#endif /* DAC_CHANNEL2_SUPPORT */
+
+/**
+ * @}
+ */
+
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup DAC_LL_EF_Init Initialization and de-initialization functions
+ * @{
+ */
+
+ErrorStatus LL_DAC_DeInit(DAC_TypeDef* DACx);
+ErrorStatus LL_DAC_Init(DAC_TypeDef* DACx, uint32_t DAC_Channel, LL_DAC_InitTypeDef* DAC_InitStruct);
+void LL_DAC_StructInit(LL_DAC_InitTypeDef* DAC_InitStruct);
+
+/**
+ * @}
+ */
+#endif /* USE_FULL_LL_DRIVER */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* DAC1 */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_LL_DAC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_dma.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_dma.h
new file mode 100644
index 0000000..c789835
--- /dev/null
+++ b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_dma.h
@@ -0,0 +1,2208 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_ll_dma.h
+ * @author MCD Application Team
+ * @brief Header file of DMA LL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_LL_DMA_H
+#define __STM32F0xx_LL_DMA_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx.h"
+
+/** @addtogroup STM32F0xx_LL_Driver
+ * @{
+ */
+
+#if defined (DMA1) || defined (DMA2)
+
+/** @defgroup DMA_LL DMA
+ * @{
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup DMA_LL_Private_Variables DMA Private Variables
+ * @{
+ */
+/* Array used to get the DMA channel register offset versus channel index LL_DMA_CHANNEL_x */
+static const uint8_t CHANNEL_OFFSET_TAB[] =
+{
+ (uint8_t)(DMA1_Channel1_BASE - DMA1_BASE),
+ (uint8_t)(DMA1_Channel2_BASE - DMA1_BASE),
+ (uint8_t)(DMA1_Channel3_BASE - DMA1_BASE),
+ (uint8_t)(DMA1_Channel4_BASE - DMA1_BASE),
+ (uint8_t)(DMA1_Channel5_BASE - DMA1_BASE),
+#if defined(DMA1_Channel6)
+ (uint8_t)(DMA1_Channel6_BASE - DMA1_BASE),
+#endif /*DMA1_Channel6*/
+#if defined(DMA1_Channel7)
+ (uint8_t)(DMA1_Channel7_BASE - DMA1_BASE)
+#endif /*DMA1_Channel7*/
+};
+/**
+ * @}
+ */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup DMA_LL_Private_Constants DMA Private Constants
+ * @{
+ */
+/* Define used to get CSELR register offset */
+#define DMA_CSELR_OFFSET (uint32_t)(DMA1_CSELR_BASE - DMA1_BASE)
+
+/* Defines used for the bit position in the register and perform offsets */
+#define DMA_POSITION_CSELR_CXS ((Channel-1U)*4U)
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup DMA_LL_Private_Macros DMA Private Macros
+ * @{
+ */
+/**
+ * @}
+ */
+#endif /*USE_FULL_LL_DRIVER*/
+
+/* Exported types ------------------------------------------------------------*/
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup DMA_LL_ES_INIT DMA Exported Init structure
+ * @{
+ */
+typedef struct
+{
+ uint32_t PeriphOrM2MSrcAddress; /*!< Specifies the peripheral base address for DMA transfer
+ or as Source base address in case of memory to memory transfer direction.
+
+ This parameter must be a value between Min_Data = 0 and Max_Data = 0xFFFFFFFF. */
+
+ uint32_t MemoryOrM2MDstAddress; /*!< Specifies the memory base address for DMA transfer
+ or as Destination base address in case of memory to memory transfer direction.
+
+ This parameter must be a value between Min_Data = 0 and Max_Data = 0xFFFFFFFF. */
+
+ uint32_t Direction; /*!< Specifies if the data will be transferred from memory to peripheral,
+ from memory to memory or from peripheral to memory.
+ This parameter can be a value of @ref DMA_LL_EC_DIRECTION
+
+ This feature can be modified afterwards using unitary function @ref LL_DMA_SetDataTransferDirection(). */
+
+ uint32_t Mode; /*!< Specifies the normal or circular operation mode.
+ This parameter can be a value of @ref DMA_LL_EC_MODE
+ @note: The circular buffer mode cannot be used if the memory to memory
+ data transfer direction is configured on the selected Channel
+
+ This feature can be modified afterwards using unitary function @ref LL_DMA_SetMode(). */
+
+ uint32_t PeriphOrM2MSrcIncMode; /*!< Specifies whether the Peripheral address or Source address in case of memory to memory transfer direction
+ is incremented or not.
+ This parameter can be a value of @ref DMA_LL_EC_PERIPH
+
+ This feature can be modified afterwards using unitary function @ref LL_DMA_SetPeriphIncMode(). */
+
+ uint32_t MemoryOrM2MDstIncMode; /*!< Specifies whether the Memory address or Destination address in case of memory to memory transfer direction
+ is incremented or not.
+ This parameter can be a value of @ref DMA_LL_EC_MEMORY
+
+ This feature can be modified afterwards using unitary function @ref LL_DMA_SetMemoryIncMode(). */
+
+ uint32_t PeriphOrM2MSrcDataSize; /*!< Specifies the Peripheral data size alignment or Source data size alignment (byte, half word, word)
+ in case of memory to memory transfer direction.
+ This parameter can be a value of @ref DMA_LL_EC_PDATAALIGN
+
+ This feature can be modified afterwards using unitary function @ref LL_DMA_SetPeriphSize(). */
+
+ uint32_t MemoryOrM2MDstDataSize; /*!< Specifies the Memory data size alignment or Destination data size alignment (byte, half word, word)
+ in case of memory to memory transfer direction.
+ This parameter can be a value of @ref DMA_LL_EC_MDATAALIGN
+
+ This feature can be modified afterwards using unitary function @ref LL_DMA_SetMemorySize(). */
+
+ uint32_t NbData; /*!< Specifies the number of data to transfer, in data unit.
+ The data unit is equal to the source buffer configuration set in PeripheralSize
+ or MemorySize parameters depending in the transfer direction.
+ This parameter must be a value between Min_Data = 0 and Max_Data = 0x0000FFFF
+
+ This feature can be modified afterwards using unitary function @ref LL_DMA_SetDataLength(). */
+#if (defined(DMA1_CSELR_DEFAULT)||defined(DMA2_CSELR_DEFAULT))
+
+ uint32_t PeriphRequest; /*!< Specifies the peripheral request.
+ This parameter can be a value of @ref DMA_LL_EC_REQUEST
+
+ This feature can be modified afterwards using unitary function @ref LL_DMA_SetPeriphRequest(). */
+#endif
+
+ uint32_t Priority; /*!< Specifies the channel priority level.
+ This parameter can be a value of @ref DMA_LL_EC_PRIORITY
+
+ This feature can be modified afterwards using unitary function @ref LL_DMA_SetChannelPriorityLevel(). */
+
+} LL_DMA_InitTypeDef;
+/**
+ * @}
+ */
+#endif /*USE_FULL_LL_DRIVER*/
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup DMA_LL_Exported_Constants DMA Exported Constants
+ * @{
+ */
+/** @defgroup DMA_LL_EC_CLEAR_FLAG Clear Flags Defines
+ * @brief Flags defines which can be used with LL_DMA_WriteReg function
+ * @{
+ */
+#define LL_DMA_IFCR_CGIF1 DMA_IFCR_CGIF1 /*!< Channel 1 global flag */
+#define LL_DMA_IFCR_CTCIF1 DMA_IFCR_CTCIF1 /*!< Channel 1 transfer complete flag */
+#define LL_DMA_IFCR_CHTIF1 DMA_IFCR_CHTIF1 /*!< Channel 1 half transfer flag */
+#define LL_DMA_IFCR_CTEIF1 DMA_IFCR_CTEIF1 /*!< Channel 1 transfer error flag */
+#define LL_DMA_IFCR_CGIF2 DMA_IFCR_CGIF2 /*!< Channel 2 global flag */
+#define LL_DMA_IFCR_CTCIF2 DMA_IFCR_CTCIF2 /*!< Channel 2 transfer complete flag */
+#define LL_DMA_IFCR_CHTIF2 DMA_IFCR_CHTIF2 /*!< Channel 2 half transfer flag */
+#define LL_DMA_IFCR_CTEIF2 DMA_IFCR_CTEIF2 /*!< Channel 2 transfer error flag */
+#define LL_DMA_IFCR_CGIF3 DMA_IFCR_CGIF3 /*!< Channel 3 global flag */
+#define LL_DMA_IFCR_CTCIF3 DMA_IFCR_CTCIF3 /*!< Channel 3 transfer complete flag */
+#define LL_DMA_IFCR_CHTIF3 DMA_IFCR_CHTIF3 /*!< Channel 3 half transfer flag */
+#define LL_DMA_IFCR_CTEIF3 DMA_IFCR_CTEIF3 /*!< Channel 3 transfer error flag */
+#define LL_DMA_IFCR_CGIF4 DMA_IFCR_CGIF4 /*!< Channel 4 global flag */
+#define LL_DMA_IFCR_CTCIF4 DMA_IFCR_CTCIF4 /*!< Channel 4 transfer complete flag */
+#define LL_DMA_IFCR_CHTIF4 DMA_IFCR_CHTIF4 /*!< Channel 4 half transfer flag */
+#define LL_DMA_IFCR_CTEIF4 DMA_IFCR_CTEIF4 /*!< Channel 4 transfer error flag */
+#define LL_DMA_IFCR_CGIF5 DMA_IFCR_CGIF5 /*!< Channel 5 global flag */
+#define LL_DMA_IFCR_CTCIF5 DMA_IFCR_CTCIF5 /*!< Channel 5 transfer complete flag */
+#define LL_DMA_IFCR_CHTIF5 DMA_IFCR_CHTIF5 /*!< Channel 5 half transfer flag */
+#define LL_DMA_IFCR_CTEIF5 DMA_IFCR_CTEIF5 /*!< Channel 5 transfer error flag */
+#if defined(DMA1_Channel6)
+#define LL_DMA_IFCR_CGIF6 DMA_IFCR_CGIF6 /*!< Channel 6 global flag */
+#define LL_DMA_IFCR_CTCIF6 DMA_IFCR_CTCIF6 /*!< Channel 6 transfer complete flag */
+#define LL_DMA_IFCR_CHTIF6 DMA_IFCR_CHTIF6 /*!< Channel 6 half transfer flag */
+#define LL_DMA_IFCR_CTEIF6 DMA_IFCR_CTEIF6 /*!< Channel 6 transfer error flag */
+#endif
+#if defined(DMA1_Channel7)
+#define LL_DMA_IFCR_CGIF7 DMA_IFCR_CGIF7 /*!< Channel 7 global flag */
+#define LL_DMA_IFCR_CTCIF7 DMA_IFCR_CTCIF7 /*!< Channel 7 transfer complete flag */
+#define LL_DMA_IFCR_CHTIF7 DMA_IFCR_CHTIF7 /*!< Channel 7 half transfer flag */
+#define LL_DMA_IFCR_CTEIF7 DMA_IFCR_CTEIF7 /*!< Channel 7 transfer error flag */
+#endif
+/**
+ * @}
+ */
+
+/** @defgroup DMA_LL_EC_GET_FLAG Get Flags Defines
+ * @brief Flags defines which can be used with LL_DMA_ReadReg function
+ * @{
+ */
+#define LL_DMA_ISR_GIF1 DMA_ISR_GIF1 /*!< Channel 1 global flag */
+#define LL_DMA_ISR_TCIF1 DMA_ISR_TCIF1 /*!< Channel 1 transfer complete flag */
+#define LL_DMA_ISR_HTIF1 DMA_ISR_HTIF1 /*!< Channel 1 half transfer flag */
+#define LL_DMA_ISR_TEIF1 DMA_ISR_TEIF1 /*!< Channel 1 transfer error flag */
+#define LL_DMA_ISR_GIF2 DMA_ISR_GIF2 /*!< Channel 2 global flag */
+#define LL_DMA_ISR_TCIF2 DMA_ISR_TCIF2 /*!< Channel 2 transfer complete flag */
+#define LL_DMA_ISR_HTIF2 DMA_ISR_HTIF2 /*!< Channel 2 half transfer flag */
+#define LL_DMA_ISR_TEIF2 DMA_ISR_TEIF2 /*!< Channel 2 transfer error flag */
+#define LL_DMA_ISR_GIF3 DMA_ISR_GIF3 /*!< Channel 3 global flag */
+#define LL_DMA_ISR_TCIF3 DMA_ISR_TCIF3 /*!< Channel 3 transfer complete flag */
+#define LL_DMA_ISR_HTIF3 DMA_ISR_HTIF3 /*!< Channel 3 half transfer flag */
+#define LL_DMA_ISR_TEIF3 DMA_ISR_TEIF3 /*!< Channel 3 transfer error flag */
+#define LL_DMA_ISR_GIF4 DMA_ISR_GIF4 /*!< Channel 4 global flag */
+#define LL_DMA_ISR_TCIF4 DMA_ISR_TCIF4 /*!< Channel 4 transfer complete flag */
+#define LL_DMA_ISR_HTIF4 DMA_ISR_HTIF4 /*!< Channel 4 half transfer flag */
+#define LL_DMA_ISR_TEIF4 DMA_ISR_TEIF4 /*!< Channel 4 transfer error flag */
+#define LL_DMA_ISR_GIF5 DMA_ISR_GIF5 /*!< Channel 5 global flag */
+#define LL_DMA_ISR_TCIF5 DMA_ISR_TCIF5 /*!< Channel 5 transfer complete flag */
+#define LL_DMA_ISR_HTIF5 DMA_ISR_HTIF5 /*!< Channel 5 half transfer flag */
+#define LL_DMA_ISR_TEIF5 DMA_ISR_TEIF5 /*!< Channel 5 transfer error flag */
+#if defined(DMA1_Channel6)
+#define LL_DMA_ISR_GIF6 DMA_ISR_GIF6 /*!< Channel 6 global flag */
+#define LL_DMA_ISR_TCIF6 DMA_ISR_TCIF6 /*!< Channel 6 transfer complete flag */
+#define LL_DMA_ISR_HTIF6 DMA_ISR_HTIF6 /*!< Channel 6 half transfer flag */
+#define LL_DMA_ISR_TEIF6 DMA_ISR_TEIF6 /*!< Channel 6 transfer error flag */
+#endif
+#if defined(DMA1_Channel7)
+#define LL_DMA_ISR_GIF7 DMA_ISR_GIF7 /*!< Channel 7 global flag */
+#define LL_DMA_ISR_TCIF7 DMA_ISR_TCIF7 /*!< Channel 7 transfer complete flag */
+#define LL_DMA_ISR_HTIF7 DMA_ISR_HTIF7 /*!< Channel 7 half transfer flag */
+#define LL_DMA_ISR_TEIF7 DMA_ISR_TEIF7 /*!< Channel 7 transfer error flag */
+#endif
+/**
+ * @}
+ */
+
+/** @defgroup DMA_LL_EC_IT IT Defines
+ * @brief IT defines which can be used with LL_DMA_ReadReg and LL_DMA_WriteReg functions
+ * @{
+ */
+#define LL_DMA_CCR_TCIE DMA_CCR_TCIE /*!< Transfer complete interrupt */
+#define LL_DMA_CCR_HTIE DMA_CCR_HTIE /*!< Half Transfer interrupt */
+#define LL_DMA_CCR_TEIE DMA_CCR_TEIE /*!< Transfer error interrupt */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_LL_EC_CHANNEL CHANNEL
+ * @{
+ */
+#define LL_DMA_CHANNEL_1 0x00000001U /*!< DMA Channel 1 */
+#define LL_DMA_CHANNEL_2 0x00000002U /*!< DMA Channel 2 */
+#define LL_DMA_CHANNEL_3 0x00000003U /*!< DMA Channel 3 */
+#define LL_DMA_CHANNEL_4 0x00000004U /*!< DMA Channel 4 */
+#define LL_DMA_CHANNEL_5 0x00000005U /*!< DMA Channel 5 */
+#if defined(DMA1_Channel6)
+#define LL_DMA_CHANNEL_6 0x00000006U /*!< DMA Channel 6 */
+#endif
+#if defined(DMA1_Channel7)
+#define LL_DMA_CHANNEL_7 0x00000007U /*!< DMA Channel 7 */
+#endif
+#if defined(USE_FULL_LL_DRIVER)
+#define LL_DMA_CHANNEL_ALL 0xFFFF0000U /*!< DMA Channel all (used only for function @ref LL_DMA_DeInit(). */
+#endif /*USE_FULL_LL_DRIVER*/
+/**
+ * @}
+ */
+
+/** @defgroup DMA_LL_EC_DIRECTION Transfer Direction
+ * @{
+ */
+#define LL_DMA_DIRECTION_PERIPH_TO_MEMORY 0x00000000U /*!< Peripheral to memory direction */
+#define LL_DMA_DIRECTION_MEMORY_TO_PERIPH DMA_CCR_DIR /*!< Memory to peripheral direction */
+#define LL_DMA_DIRECTION_MEMORY_TO_MEMORY DMA_CCR_MEM2MEM /*!< Memory to memory direction */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_LL_EC_MODE Transfer mode
+ * @{
+ */
+#define LL_DMA_MODE_NORMAL 0x00000000U /*!< Normal Mode */
+#define LL_DMA_MODE_CIRCULAR DMA_CCR_CIRC /*!< Circular Mode */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_LL_EC_PERIPH Peripheral increment mode
+ * @{
+ */
+#define LL_DMA_PERIPH_INCREMENT DMA_CCR_PINC /*!< Peripheral increment mode Enable */
+#define LL_DMA_PERIPH_NOINCREMENT 0x00000000U /*!< Peripheral increment mode Disable */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_LL_EC_MEMORY Memory increment mode
+ * @{
+ */
+#define LL_DMA_MEMORY_INCREMENT DMA_CCR_MINC /*!< Memory increment mode Enable */
+#define LL_DMA_MEMORY_NOINCREMENT 0x00000000U /*!< Memory increment mode Disable */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_LL_EC_PDATAALIGN Peripheral data alignment
+ * @{
+ */
+#define LL_DMA_PDATAALIGN_BYTE 0x00000000U /*!< Peripheral data alignment : Byte */
+#define LL_DMA_PDATAALIGN_HALFWORD DMA_CCR_PSIZE_0 /*!< Peripheral data alignment : HalfWord */
+#define LL_DMA_PDATAALIGN_WORD DMA_CCR_PSIZE_1 /*!< Peripheral data alignment : Word */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_LL_EC_MDATAALIGN Memory data alignment
+ * @{
+ */
+#define LL_DMA_MDATAALIGN_BYTE 0x00000000U /*!< Memory data alignment : Byte */
+#define LL_DMA_MDATAALIGN_HALFWORD DMA_CCR_MSIZE_0 /*!< Memory data alignment : HalfWord */
+#define LL_DMA_MDATAALIGN_WORD DMA_CCR_MSIZE_1 /*!< Memory data alignment : Word */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_LL_EC_PRIORITY Transfer Priority level
+ * @{
+ */
+#define LL_DMA_PRIORITY_LOW 0x00000000U /*!< Priority level : Low */
+#define LL_DMA_PRIORITY_MEDIUM DMA_CCR_PL_0 /*!< Priority level : Medium */
+#define LL_DMA_PRIORITY_HIGH DMA_CCR_PL_1 /*!< Priority level : High */
+#define LL_DMA_PRIORITY_VERYHIGH DMA_CCR_PL /*!< Priority level : Very_High */
+/**
+ * @}
+ */
+
+#if (defined(DMA1_CSELR_DEFAULT)||defined(DMA2_CSELR_DEFAULT))
+/** @defgroup DMA_LL_EC_REQUEST Transfer peripheral request
+ * @{
+ */
+#define LL_DMA_REQUEST_0 0x00000000U /*!< DMA peripheral request 0 */
+#define LL_DMA_REQUEST_1 0x00000001U /*!< DMA peripheral request 1 */
+#define LL_DMA_REQUEST_2 0x00000002U /*!< DMA peripheral request 2 */
+#define LL_DMA_REQUEST_3 0x00000003U /*!< DMA peripheral request 3 */
+#define LL_DMA_REQUEST_4 0x00000004U /*!< DMA peripheral request 4 */
+#define LL_DMA_REQUEST_5 0x00000005U /*!< DMA peripheral request 5 */
+#define LL_DMA_REQUEST_6 0x00000006U /*!< DMA peripheral request 6 */
+#define LL_DMA_REQUEST_7 0x00000007U /*!< DMA peripheral request 7 */
+#define LL_DMA_REQUEST_8 0x00000008U /*!< DMA peripheral request 8 */
+#define LL_DMA_REQUEST_9 0x00000009U /*!< DMA peripheral request 9 */
+#define LL_DMA_REQUEST_10 0x0000000AU /*!< DMA peripheral request 10 */
+#define LL_DMA_REQUEST_11 0x0000000BU /*!< DMA peripheral request 11 */
+#define LL_DMA_REQUEST_12 0x0000000CU /*!< DMA peripheral request 12 */
+#define LL_DMA_REQUEST_13 0x0000000DU /*!< DMA peripheral request 13 */
+#define LL_DMA_REQUEST_14 0x0000000EU /*!< DMA peripheral request 14 */
+#define LL_DMA_REQUEST_15 0x0000000FU /*!< DMA peripheral request 15 */
+/**
+ * @}
+ */
+#endif
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup DMA_LL_Exported_Macros DMA Exported Macros
+ * @{
+ */
+
+/** @defgroup DMA_LL_EM_WRITE_READ Common Write and read registers macros
+ * @{
+ */
+/**
+ * @brief Write a value in DMA register
+ * @param __INSTANCE__ DMA Instance
+ * @param __REG__ Register to be written
+ * @param __VALUE__ Value to be written in the register
+ * @retval None
+ */
+#define LL_DMA_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__))
+
+/**
+ * @brief Read a value in DMA register
+ * @param __INSTANCE__ DMA Instance
+ * @param __REG__ Register to be read
+ * @retval Register value
+ */
+#define LL_DMA_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__)
+/**
+ * @}
+ */
+
+/** @defgroup DMA_LL_EM_CONVERT_DMAxCHANNELy Convert DMAxChannely
+ * @{
+ */
+/**
+ * @brief Convert DMAx_Channely into DMAx
+ * @param __CHANNEL_INSTANCE__ DMAx_Channely
+ * @retval DMAx
+ */
+#if defined(DMA2)
+#define __LL_DMA_GET_INSTANCE(__CHANNEL_INSTANCE__) \
+(((uint32_t)(__CHANNEL_INSTANCE__) > ((uint32_t)DMA1_Channel7)) ? DMA2 : DMA1)
+#else
+#define __LL_DMA_GET_INSTANCE(__CHANNEL_INSTANCE__) (DMA1)
+#endif
+
+/**
+ * @brief Convert DMAx_Channely into LL_DMA_CHANNEL_y
+ * @param __CHANNEL_INSTANCE__ DMAx_Channely
+ * @retval LL_DMA_CHANNEL_y
+ */
+#if defined (DMA2)
+#if defined (DMA2_Channel6) && defined (DMA2_Channel7)
+#define __LL_DMA_GET_CHANNEL(__CHANNEL_INSTANCE__) \
+(((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel1)) ? LL_DMA_CHANNEL_1 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel1)) ? LL_DMA_CHANNEL_1 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel2)) ? LL_DMA_CHANNEL_2 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel2)) ? LL_DMA_CHANNEL_2 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel3)) ? LL_DMA_CHANNEL_3 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel3)) ? LL_DMA_CHANNEL_3 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel4)) ? LL_DMA_CHANNEL_4 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel4)) ? LL_DMA_CHANNEL_4 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel5)) ? LL_DMA_CHANNEL_5 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel5)) ? LL_DMA_CHANNEL_5 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel6)) ? LL_DMA_CHANNEL_6 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel6)) ? LL_DMA_CHANNEL_6 : \
+ LL_DMA_CHANNEL_7)
+#else
+#define __LL_DMA_GET_CHANNEL(__CHANNEL_INSTANCE__) \
+(((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel1)) ? LL_DMA_CHANNEL_1 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel1)) ? LL_DMA_CHANNEL_1 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel2)) ? LL_DMA_CHANNEL_2 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel2)) ? LL_DMA_CHANNEL_2 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel3)) ? LL_DMA_CHANNEL_3 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel3)) ? LL_DMA_CHANNEL_3 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel4)) ? LL_DMA_CHANNEL_4 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel4)) ? LL_DMA_CHANNEL_4 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel5)) ? LL_DMA_CHANNEL_5 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel5)) ? LL_DMA_CHANNEL_5 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel6)) ? LL_DMA_CHANNEL_6 : \
+ LL_DMA_CHANNEL_7)
+#endif
+#else
+#if defined (DMA1_Channel6) && defined (DMA1_Channel7)
+#define __LL_DMA_GET_CHANNEL(__CHANNEL_INSTANCE__) \
+(((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel1)) ? LL_DMA_CHANNEL_1 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel2)) ? LL_DMA_CHANNEL_2 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel3)) ? LL_DMA_CHANNEL_3 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel4)) ? LL_DMA_CHANNEL_4 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel5)) ? LL_DMA_CHANNEL_5 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel6)) ? LL_DMA_CHANNEL_6 : \
+ LL_DMA_CHANNEL_7)
+#elif defined (DMA1_Channel6)
+#define __LL_DMA_GET_CHANNEL(__CHANNEL_INSTANCE__) \
+(((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel1)) ? LL_DMA_CHANNEL_1 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel2)) ? LL_DMA_CHANNEL_2 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel3)) ? LL_DMA_CHANNEL_3 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel4)) ? LL_DMA_CHANNEL_4 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel5)) ? LL_DMA_CHANNEL_5 : \
+ LL_DMA_CHANNEL_6)
+#else
+#define __LL_DMA_GET_CHANNEL(__CHANNEL_INSTANCE__) \
+(((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel1)) ? LL_DMA_CHANNEL_1 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel2)) ? LL_DMA_CHANNEL_2 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel3)) ? LL_DMA_CHANNEL_3 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel4)) ? LL_DMA_CHANNEL_4 : \
+ LL_DMA_CHANNEL_5)
+#endif /* DMA1_Channel6 && DMA1_Channel7 */
+#endif
+
+/**
+ * @brief Convert DMA Instance DMAx and LL_DMA_CHANNEL_y into DMAx_Channely
+ * @param __DMA_INSTANCE__ DMAx
+ * @param __CHANNEL__ LL_DMA_CHANNEL_y
+ * @retval DMAx_Channely
+ */
+#if defined (DMA2)
+#if defined (DMA2_Channel6) && defined (DMA2_Channel7)
+#define __LL_DMA_GET_CHANNEL_INSTANCE(__DMA_INSTANCE__, __CHANNEL__) \
+((((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_1))) ? DMA1_Channel1 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_1))) ? DMA2_Channel1 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_2))) ? DMA1_Channel2 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_2))) ? DMA2_Channel2 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_3))) ? DMA1_Channel3 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_3))) ? DMA2_Channel3 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_4))) ? DMA1_Channel4 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_4))) ? DMA2_Channel4 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_5))) ? DMA1_Channel5 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_5))) ? DMA2_Channel5 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_6))) ? DMA1_Channel6 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_6))) ? DMA2_Channel6 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_7))) ? DMA1_Channel7 : \
+ DMA2_Channel7)
+#else
+#define __LL_DMA_GET_CHANNEL_INSTANCE(__DMA_INSTANCE__, __CHANNEL__) \
+((((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_1))) ? DMA1_Channel1 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_1))) ? DMA2_Channel1 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_2))) ? DMA1_Channel2 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_2))) ? DMA2_Channel2 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_3))) ? DMA1_Channel3 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_3))) ? DMA2_Channel3 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_4))) ? DMA1_Channel4 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_4))) ? DMA2_Channel4 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_5))) ? DMA1_Channel5 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_5))) ? DMA2_Channel5 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_6))) ? DMA1_Channel6 : \
+ DMA1_Channel7)
+#endif
+#else
+#if defined (DMA1_Channel6) && defined (DMA1_Channel7)
+#define __LL_DMA_GET_CHANNEL_INSTANCE(__DMA_INSTANCE__, __CHANNEL__) \
+((((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_1))) ? DMA1_Channel1 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_2))) ? DMA1_Channel2 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_3))) ? DMA1_Channel3 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_4))) ? DMA1_Channel4 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_5))) ? DMA1_Channel5 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_6))) ? DMA1_Channel6 : \
+ DMA1_Channel7)
+#elif defined (DMA1_Channel6)
+#define __LL_DMA_GET_CHANNEL_INSTANCE(__DMA_INSTANCE__, __CHANNEL__) \
+((((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_1))) ? DMA1_Channel1 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_2))) ? DMA1_Channel2 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_3))) ? DMA1_Channel3 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_4))) ? DMA1_Channel4 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_5))) ? DMA1_Channel5 : \
+ DMA1_Channel6)
+#else
+#define __LL_DMA_GET_CHANNEL_INSTANCE(__DMA_INSTANCE__, __CHANNEL__) \
+((((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_1))) ? DMA1_Channel1 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_2))) ? DMA1_Channel2 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_3))) ? DMA1_Channel3 : \
+ (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_4))) ? DMA1_Channel4 : \
+ DMA1_Channel5)
+#endif /* DMA1_Channel6 && DMA1_Channel7 */
+#endif
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup DMA_LL_Exported_Functions DMA Exported Functions
+ * @{
+ */
+
+/** @defgroup DMA_LL_EF_Configuration Configuration
+ * @{
+ */
+/**
+ * @brief Enable DMA channel.
+ * @rmtoll CCR EN LL_DMA_EnableChannel
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_EnableChannel(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+ SET_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_EN);
+}
+
+/**
+ * @brief Disable DMA channel.
+ * @rmtoll CCR EN LL_DMA_DisableChannel
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_DisableChannel(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+ CLEAR_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_EN);
+}
+
+/**
+ * @brief Check if DMA channel is enabled or disabled.
+ * @rmtoll CCR EN LL_DMA_IsEnabledChannel
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsEnabledChannel(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+ return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR,
+ DMA_CCR_EN) == (DMA_CCR_EN));
+}
+
+/**
+ * @brief Configure all parameters link to DMA transfer.
+ * @rmtoll CCR DIR LL_DMA_ConfigTransfer\n
+ * CCR MEM2MEM LL_DMA_ConfigTransfer\n
+ * CCR CIRC LL_DMA_ConfigTransfer\n
+ * CCR PINC LL_DMA_ConfigTransfer\n
+ * CCR MINC LL_DMA_ConfigTransfer\n
+ * CCR PSIZE LL_DMA_ConfigTransfer\n
+ * CCR MSIZE LL_DMA_ConfigTransfer\n
+ * CCR PL LL_DMA_ConfigTransfer
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @param Configuration This parameter must be a combination of all the following values:
+ * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY or @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH or @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY
+ * @arg @ref LL_DMA_MODE_NORMAL or @ref LL_DMA_MODE_CIRCULAR
+ * @arg @ref LL_DMA_PERIPH_INCREMENT or @ref LL_DMA_PERIPH_NOINCREMENT
+ * @arg @ref LL_DMA_MEMORY_INCREMENT or @ref LL_DMA_MEMORY_NOINCREMENT
+ * @arg @ref LL_DMA_PDATAALIGN_BYTE or @ref LL_DMA_PDATAALIGN_HALFWORD or @ref LL_DMA_PDATAALIGN_WORD
+ * @arg @ref LL_DMA_MDATAALIGN_BYTE or @ref LL_DMA_MDATAALIGN_HALFWORD or @ref LL_DMA_MDATAALIGN_WORD
+ * @arg @ref LL_DMA_PRIORITY_LOW or @ref LL_DMA_PRIORITY_MEDIUM or @ref LL_DMA_PRIORITY_HIGH or @ref LL_DMA_PRIORITY_VERYHIGH
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ConfigTransfer(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Configuration)
+{
+ MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR,
+ DMA_CCR_DIR | DMA_CCR_MEM2MEM | DMA_CCR_CIRC | DMA_CCR_PINC | DMA_CCR_MINC | DMA_CCR_PSIZE | DMA_CCR_MSIZE | DMA_CCR_PL,
+ Configuration);
+}
+
+/**
+ * @brief Set Data transfer direction (read from peripheral or from memory).
+ * @rmtoll CCR DIR LL_DMA_SetDataTransferDirection\n
+ * CCR MEM2MEM LL_DMA_SetDataTransferDirection
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @param Direction This parameter can be one of the following values:
+ * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY
+ * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH
+ * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_SetDataTransferDirection(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Direction)
+{
+ MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR,
+ DMA_CCR_DIR | DMA_CCR_MEM2MEM, Direction);
+}
+
+/**
+ * @brief Get Data transfer direction (read from peripheral or from memory).
+ * @rmtoll CCR DIR LL_DMA_GetDataTransferDirection\n
+ * CCR MEM2MEM LL_DMA_GetDataTransferDirection
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY
+ * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH
+ * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY
+ */
+__STATIC_INLINE uint32_t LL_DMA_GetDataTransferDirection(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+ return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR,
+ DMA_CCR_DIR | DMA_CCR_MEM2MEM));
+}
+
+/**
+ * @brief Set DMA mode circular or normal.
+ * @note The circular buffer mode cannot be used if the memory-to-memory
+ * data transfer is configured on the selected Channel.
+ * @rmtoll CCR CIRC LL_DMA_SetMode
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @param Mode This parameter can be one of the following values:
+ * @arg @ref LL_DMA_MODE_NORMAL
+ * @arg @ref LL_DMA_MODE_CIRCULAR
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_SetMode(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Mode)
+{
+ MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_CIRC,
+ Mode);
+}
+
+/**
+ * @brief Get DMA mode circular or normal.
+ * @rmtoll CCR CIRC LL_DMA_GetMode
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_DMA_MODE_NORMAL
+ * @arg @ref LL_DMA_MODE_CIRCULAR
+ */
+__STATIC_INLINE uint32_t LL_DMA_GetMode(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+ return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR,
+ DMA_CCR_CIRC));
+}
+
+/**
+ * @brief Set Peripheral increment mode.
+ * @rmtoll CCR PINC LL_DMA_SetPeriphIncMode
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @param PeriphOrM2MSrcIncMode This parameter can be one of the following values:
+ * @arg @ref LL_DMA_PERIPH_INCREMENT
+ * @arg @ref LL_DMA_PERIPH_NOINCREMENT
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_SetPeriphIncMode(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t PeriphOrM2MSrcIncMode)
+{
+ MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_PINC,
+ PeriphOrM2MSrcIncMode);
+}
+
+/**
+ * @brief Get Peripheral increment mode.
+ * @rmtoll CCR PINC LL_DMA_GetPeriphIncMode
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_DMA_PERIPH_INCREMENT
+ * @arg @ref LL_DMA_PERIPH_NOINCREMENT
+ */
+__STATIC_INLINE uint32_t LL_DMA_GetPeriphIncMode(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+ return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR,
+ DMA_CCR_PINC));
+}
+
+/**
+ * @brief Set Memory increment mode.
+ * @rmtoll CCR MINC LL_DMA_SetMemoryIncMode
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @param MemoryOrM2MDstIncMode This parameter can be one of the following values:
+ * @arg @ref LL_DMA_MEMORY_INCREMENT
+ * @arg @ref LL_DMA_MEMORY_NOINCREMENT
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_SetMemoryIncMode(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryOrM2MDstIncMode)
+{
+ MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_MINC,
+ MemoryOrM2MDstIncMode);
+}
+
+/**
+ * @brief Get Memory increment mode.
+ * @rmtoll CCR MINC LL_DMA_GetMemoryIncMode
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_DMA_MEMORY_INCREMENT
+ * @arg @ref LL_DMA_MEMORY_NOINCREMENT
+ */
+__STATIC_INLINE uint32_t LL_DMA_GetMemoryIncMode(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+ return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR,
+ DMA_CCR_MINC));
+}
+
+/**
+ * @brief Set Peripheral size.
+ * @rmtoll CCR PSIZE LL_DMA_SetPeriphSize
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @param PeriphOrM2MSrcDataSize This parameter can be one of the following values:
+ * @arg @ref LL_DMA_PDATAALIGN_BYTE
+ * @arg @ref LL_DMA_PDATAALIGN_HALFWORD
+ * @arg @ref LL_DMA_PDATAALIGN_WORD
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_SetPeriphSize(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t PeriphOrM2MSrcDataSize)
+{
+ MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_PSIZE,
+ PeriphOrM2MSrcDataSize);
+}
+
+/**
+ * @brief Get Peripheral size.
+ * @rmtoll CCR PSIZE LL_DMA_GetPeriphSize
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_DMA_PDATAALIGN_BYTE
+ * @arg @ref LL_DMA_PDATAALIGN_HALFWORD
+ * @arg @ref LL_DMA_PDATAALIGN_WORD
+ */
+__STATIC_INLINE uint32_t LL_DMA_GetPeriphSize(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+ return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR,
+ DMA_CCR_PSIZE));
+}
+
+/**
+ * @brief Set Memory size.
+ * @rmtoll CCR MSIZE LL_DMA_SetMemorySize
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @param MemoryOrM2MDstDataSize This parameter can be one of the following values:
+ * @arg @ref LL_DMA_MDATAALIGN_BYTE
+ * @arg @ref LL_DMA_MDATAALIGN_HALFWORD
+ * @arg @ref LL_DMA_MDATAALIGN_WORD
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_SetMemorySize(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryOrM2MDstDataSize)
+{
+ MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_MSIZE,
+ MemoryOrM2MDstDataSize);
+}
+
+/**
+ * @brief Get Memory size.
+ * @rmtoll CCR MSIZE LL_DMA_GetMemorySize
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_DMA_MDATAALIGN_BYTE
+ * @arg @ref LL_DMA_MDATAALIGN_HALFWORD
+ * @arg @ref LL_DMA_MDATAALIGN_WORD
+ */
+__STATIC_INLINE uint32_t LL_DMA_GetMemorySize(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+ return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR,
+ DMA_CCR_MSIZE));
+}
+
+/**
+ * @brief Set Channel priority level.
+ * @rmtoll CCR PL LL_DMA_SetChannelPriorityLevel
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @param Priority This parameter can be one of the following values:
+ * @arg @ref LL_DMA_PRIORITY_LOW
+ * @arg @ref LL_DMA_PRIORITY_MEDIUM
+ * @arg @ref LL_DMA_PRIORITY_HIGH
+ * @arg @ref LL_DMA_PRIORITY_VERYHIGH
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_SetChannelPriorityLevel(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Priority)
+{
+ MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_PL,
+ Priority);
+}
+
+/**
+ * @brief Get Channel priority level.
+ * @rmtoll CCR PL LL_DMA_GetChannelPriorityLevel
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_DMA_PRIORITY_LOW
+ * @arg @ref LL_DMA_PRIORITY_MEDIUM
+ * @arg @ref LL_DMA_PRIORITY_HIGH
+ * @arg @ref LL_DMA_PRIORITY_VERYHIGH
+ */
+__STATIC_INLINE uint32_t LL_DMA_GetChannelPriorityLevel(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+ return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR,
+ DMA_CCR_PL));
+}
+
+/**
+ * @brief Set Number of data to transfer.
+ * @note This action has no effect if
+ * channel is enabled.
+ * @rmtoll CNDTR NDT LL_DMA_SetDataLength
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @param NbData Between Min_Data = 0 and Max_Data = 0x0000FFFF
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_SetDataLength(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t NbData)
+{
+ MODIFY_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CNDTR,
+ DMA_CNDTR_NDT, NbData);
+}
+
+/**
+ * @brief Get Number of data to transfer.
+ * @note Once the channel is enabled, the return value indicate the
+ * remaining bytes to be transmitted.
+ * @rmtoll CNDTR NDT LL_DMA_GetDataLength
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @retval Between Min_Data = 0 and Max_Data = 0xFFFFFFFF
+ */
+__STATIC_INLINE uint32_t LL_DMA_GetDataLength(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+ return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CNDTR,
+ DMA_CNDTR_NDT));
+}
+
+/**
+ * @brief Configure the Source and Destination addresses.
+ * @note This API must not be called when the DMA channel is enabled.
+ * @note Each IP using DMA provides an API to get directly the register adress (LL_PPP_DMA_GetRegAddr).
+ * @rmtoll CPAR PA LL_DMA_ConfigAddresses\n
+ * CMAR MA LL_DMA_ConfigAddresses
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @param SrcAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF
+ * @param DstAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF
+ * @param Direction This parameter can be one of the following values:
+ * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY
+ * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH
+ * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ConfigAddresses(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t SrcAddress,
+ uint32_t DstAddress, uint32_t Direction)
+{
+ /* Direction Memory to Periph */
+ if (Direction == LL_DMA_DIRECTION_MEMORY_TO_PERIPH)
+ {
+ WRITE_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CMAR, SrcAddress);
+ WRITE_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CPAR, DstAddress);
+ }
+ /* Direction Periph to Memory and Memory to Memory */
+ else
+ {
+ WRITE_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CPAR, SrcAddress);
+ WRITE_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CMAR, DstAddress);
+ }
+}
+
+/**
+ * @brief Set the Memory address.
+ * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only.
+ * @note This API must not be called when the DMA channel is enabled.
+ * @rmtoll CMAR MA LL_DMA_SetMemoryAddress
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @param MemoryAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_SetMemoryAddress(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryAddress)
+{
+ WRITE_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CMAR, MemoryAddress);
+}
+
+/**
+ * @brief Set the Peripheral address.
+ * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only.
+ * @note This API must not be called when the DMA channel is enabled.
+ * @rmtoll CPAR PA LL_DMA_SetPeriphAddress
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @param PeriphAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_SetPeriphAddress(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t PeriphAddress)
+{
+ WRITE_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CPAR, PeriphAddress);
+}
+
+/**
+ * @brief Get Memory address.
+ * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only.
+ * @rmtoll CMAR MA LL_DMA_GetMemoryAddress
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @retval Between Min_Data = 0 and Max_Data = 0xFFFFFFFF
+ */
+__STATIC_INLINE uint32_t LL_DMA_GetMemoryAddress(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+ return (READ_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CMAR));
+}
+
+/**
+ * @brief Get Peripheral address.
+ * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only.
+ * @rmtoll CPAR PA LL_DMA_GetPeriphAddress
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @retval Between Min_Data = 0 and Max_Data = 0xFFFFFFFF
+ */
+__STATIC_INLINE uint32_t LL_DMA_GetPeriphAddress(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+ return (READ_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CPAR));
+}
+
+/**
+ * @brief Set the Memory to Memory Source address.
+ * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only.
+ * @note This API must not be called when the DMA channel is enabled.
+ * @rmtoll CPAR PA LL_DMA_SetM2MSrcAddress
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @param MemoryAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_SetM2MSrcAddress(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryAddress)
+{
+ WRITE_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CPAR, MemoryAddress);
+}
+
+/**
+ * @brief Set the Memory to Memory Destination address.
+ * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only.
+ * @note This API must not be called when the DMA channel is enabled.
+ * @rmtoll CMAR MA LL_DMA_SetM2MDstAddress
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @param MemoryAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_SetM2MDstAddress(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryAddress)
+{
+ WRITE_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CMAR, MemoryAddress);
+}
+
+/**
+ * @brief Get the Memory to Memory Source address.
+ * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only.
+ * @rmtoll CPAR PA LL_DMA_GetM2MSrcAddress
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @retval Between Min_Data = 0 and Max_Data = 0xFFFFFFFF
+ */
+__STATIC_INLINE uint32_t LL_DMA_GetM2MSrcAddress(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+ return (READ_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CPAR));
+}
+
+/**
+ * @brief Get the Memory to Memory Destination address.
+ * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only.
+ * @rmtoll CMAR MA LL_DMA_GetM2MDstAddress
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @retval Between Min_Data = 0 and Max_Data = 0xFFFFFFFF
+ */
+__STATIC_INLINE uint32_t LL_DMA_GetM2MDstAddress(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+ return (READ_REG(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CMAR));
+}
+
+#if (defined(DMA1_CSELR_DEFAULT)||defined(DMA2_CSELR_DEFAULT))
+/**
+ * @brief Set DMA request for DMA instance on Channel x.
+ * @note Please refer to Reference Manual to get the available mapping of Request value link to Channel Selection.
+ * @rmtoll CSELR C1S LL_DMA_SetPeriphRequest\n
+ * CSELR C2S LL_DMA_SetPeriphRequest\n
+ * CSELR C3S LL_DMA_SetPeriphRequest\n
+ * CSELR C4S LL_DMA_SetPeriphRequest\n
+ * CSELR C5S LL_DMA_SetPeriphRequest\n
+ * CSELR C6S LL_DMA_SetPeriphRequest\n
+ * CSELR C7S LL_DMA_SetPeriphRequest
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @param PeriphRequest This parameter can be one of the following values:
+ * @arg @ref LL_DMA_REQUEST_0
+ * @arg @ref LL_DMA_REQUEST_1
+ * @arg @ref LL_DMA_REQUEST_2
+ * @arg @ref LL_DMA_REQUEST_3
+ * @arg @ref LL_DMA_REQUEST_4
+ * @arg @ref LL_DMA_REQUEST_5
+ * @arg @ref LL_DMA_REQUEST_6
+ * @arg @ref LL_DMA_REQUEST_7
+ * @arg @ref LL_DMA_REQUEST_8
+ * @arg @ref LL_DMA_REQUEST_9
+ * @arg @ref LL_DMA_REQUEST_10
+ * @arg @ref LL_DMA_REQUEST_11
+ * @arg @ref LL_DMA_REQUEST_12
+ * @arg @ref LL_DMA_REQUEST_13
+ * @arg @ref LL_DMA_REQUEST_14
+ * @arg @ref LL_DMA_REQUEST_15
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_SetPeriphRequest(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t PeriphRequest)
+{
+ MODIFY_REG(DMAx->CSELR,
+ DMA_CSELR_C1S << ((Channel - 1U) * 4U), PeriphRequest << DMA_POSITION_CSELR_CXS);
+}
+
+/**
+ * @brief Get DMA request for DMA instance on Channel x.
+ * @rmtoll CSELR C1S LL_DMA_GetPeriphRequest\n
+ * CSELR C2S LL_DMA_GetPeriphRequest\n
+ * CSELR C3S LL_DMA_GetPeriphRequest\n
+ * CSELR C4S LL_DMA_GetPeriphRequest\n
+ * CSELR C5S LL_DMA_GetPeriphRequest\n
+ * CSELR C6S LL_DMA_GetPeriphRequest\n
+ * CSELR C7S LL_DMA_GetPeriphRequest
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_DMA_REQUEST_0
+ * @arg @ref LL_DMA_REQUEST_1
+ * @arg @ref LL_DMA_REQUEST_2
+ * @arg @ref LL_DMA_REQUEST_3
+ * @arg @ref LL_DMA_REQUEST_4
+ * @arg @ref LL_DMA_REQUEST_5
+ * @arg @ref LL_DMA_REQUEST_6
+ * @arg @ref LL_DMA_REQUEST_7
+ * @arg @ref LL_DMA_REQUEST_8
+ * @arg @ref LL_DMA_REQUEST_9
+ * @arg @ref LL_DMA_REQUEST_10
+ * @arg @ref LL_DMA_REQUEST_11
+ * @arg @ref LL_DMA_REQUEST_12
+ * @arg @ref LL_DMA_REQUEST_13
+ * @arg @ref LL_DMA_REQUEST_14
+ * @arg @ref LL_DMA_REQUEST_15
+ */
+__STATIC_INLINE uint32_t LL_DMA_GetPeriphRequest(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+ return (READ_BIT(DMAx->CSELR,
+ DMA_CSELR_C1S << ((Channel - 1U) * 4U)) >> DMA_POSITION_CSELR_CXS);
+}
+#endif
+
+/**
+ * @}
+ */
+
+/** @defgroup DMA_LL_EF_FLAG_Management FLAG_Management
+ * @{
+ */
+
+/**
+ * @brief Get Channel 1 global interrupt flag.
+ * @rmtoll ISR GIF1 LL_DMA_IsActiveFlag_GI1
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI1(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_GIF1) == (DMA_ISR_GIF1));
+}
+
+/**
+ * @brief Get Channel 2 global interrupt flag.
+ * @rmtoll ISR GIF2 LL_DMA_IsActiveFlag_GI2
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI2(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_GIF2) == (DMA_ISR_GIF2));
+}
+
+/**
+ * @brief Get Channel 3 global interrupt flag.
+ * @rmtoll ISR GIF3 LL_DMA_IsActiveFlag_GI3
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI3(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_GIF3) == (DMA_ISR_GIF3));
+}
+
+/**
+ * @brief Get Channel 4 global interrupt flag.
+ * @rmtoll ISR GIF4 LL_DMA_IsActiveFlag_GI4
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI4(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_GIF4) == (DMA_ISR_GIF4));
+}
+
+/**
+ * @brief Get Channel 5 global interrupt flag.
+ * @rmtoll ISR GIF5 LL_DMA_IsActiveFlag_GI5
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI5(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_GIF5) == (DMA_ISR_GIF5));
+}
+
+#if defined(DMA1_Channel6)
+/**
+ * @brief Get Channel 6 global interrupt flag.
+ * @rmtoll ISR GIF6 LL_DMA_IsActiveFlag_GI6
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI6(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_GIF6) == (DMA_ISR_GIF6));
+}
+#endif
+
+#if defined(DMA1_Channel7)
+/**
+ * @brief Get Channel 7 global interrupt flag.
+ * @rmtoll ISR GIF7 LL_DMA_IsActiveFlag_GI7
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI7(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_GIF7) == (DMA_ISR_GIF7));
+}
+#endif
+
+/**
+ * @brief Get Channel 1 transfer complete flag.
+ * @rmtoll ISR TCIF1 LL_DMA_IsActiveFlag_TC1
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC1(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_TCIF1) == (DMA_ISR_TCIF1));
+}
+
+/**
+ * @brief Get Channel 2 transfer complete flag.
+ * @rmtoll ISR TCIF2 LL_DMA_IsActiveFlag_TC2
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC2(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_TCIF2) == (DMA_ISR_TCIF2));
+}
+
+/**
+ * @brief Get Channel 3 transfer complete flag.
+ * @rmtoll ISR TCIF3 LL_DMA_IsActiveFlag_TC3
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC3(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_TCIF3) == (DMA_ISR_TCIF3));
+}
+
+/**
+ * @brief Get Channel 4 transfer complete flag.
+ * @rmtoll ISR TCIF4 LL_DMA_IsActiveFlag_TC4
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC4(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_TCIF4) == (DMA_ISR_TCIF4));
+}
+
+/**
+ * @brief Get Channel 5 transfer complete flag.
+ * @rmtoll ISR TCIF5 LL_DMA_IsActiveFlag_TC5
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC5(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_TCIF5) == (DMA_ISR_TCIF5));
+}
+
+#if defined(DMA1_Channel6)
+/**
+ * @brief Get Channel 6 transfer complete flag.
+ * @rmtoll ISR TCIF6 LL_DMA_IsActiveFlag_TC6
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC6(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_TCIF6) == (DMA_ISR_TCIF6));
+}
+#endif
+
+#if defined(DMA1_Channel7)
+/**
+ * @brief Get Channel 7 transfer complete flag.
+ * @rmtoll ISR TCIF7 LL_DMA_IsActiveFlag_TC7
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC7(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_TCIF7) == (DMA_ISR_TCIF7));
+}
+#endif
+
+/**
+ * @brief Get Channel 1 half transfer flag.
+ * @rmtoll ISR HTIF1 LL_DMA_IsActiveFlag_HT1
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT1(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_HTIF1) == (DMA_ISR_HTIF1));
+}
+
+/**
+ * @brief Get Channel 2 half transfer flag.
+ * @rmtoll ISR HTIF2 LL_DMA_IsActiveFlag_HT2
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT2(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_HTIF2) == (DMA_ISR_HTIF2));
+}
+
+/**
+ * @brief Get Channel 3 half transfer flag.
+ * @rmtoll ISR HTIF3 LL_DMA_IsActiveFlag_HT3
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT3(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_HTIF3) == (DMA_ISR_HTIF3));
+}
+
+/**
+ * @brief Get Channel 4 half transfer flag.
+ * @rmtoll ISR HTIF4 LL_DMA_IsActiveFlag_HT4
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT4(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_HTIF4) == (DMA_ISR_HTIF4));
+}
+
+/**
+ * @brief Get Channel 5 half transfer flag.
+ * @rmtoll ISR HTIF5 LL_DMA_IsActiveFlag_HT5
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT5(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_HTIF5) == (DMA_ISR_HTIF5));
+}
+
+#if defined(DMA1_Channel6)
+/**
+ * @brief Get Channel 6 half transfer flag.
+ * @rmtoll ISR HTIF6 LL_DMA_IsActiveFlag_HT6
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT6(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_HTIF6) == (DMA_ISR_HTIF6));
+}
+#endif
+
+#if defined(DMA1_Channel7)
+/**
+ * @brief Get Channel 7 half transfer flag.
+ * @rmtoll ISR HTIF7 LL_DMA_IsActiveFlag_HT7
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT7(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_HTIF7) == (DMA_ISR_HTIF7));
+}
+#endif
+
+/**
+ * @brief Get Channel 1 transfer error flag.
+ * @rmtoll ISR TEIF1 LL_DMA_IsActiveFlag_TE1
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE1(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_TEIF1) == (DMA_ISR_TEIF1));
+}
+
+/**
+ * @brief Get Channel 2 transfer error flag.
+ * @rmtoll ISR TEIF2 LL_DMA_IsActiveFlag_TE2
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE2(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_TEIF2) == (DMA_ISR_TEIF2));
+}
+
+/**
+ * @brief Get Channel 3 transfer error flag.
+ * @rmtoll ISR TEIF3 LL_DMA_IsActiveFlag_TE3
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE3(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_TEIF3) == (DMA_ISR_TEIF3));
+}
+
+/**
+ * @brief Get Channel 4 transfer error flag.
+ * @rmtoll ISR TEIF4 LL_DMA_IsActiveFlag_TE4
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE4(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_TEIF4) == (DMA_ISR_TEIF4));
+}
+
+/**
+ * @brief Get Channel 5 transfer error flag.
+ * @rmtoll ISR TEIF5 LL_DMA_IsActiveFlag_TE5
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE5(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_TEIF5) == (DMA_ISR_TEIF5));
+}
+
+#if defined(DMA1_Channel6)
+/**
+ * @brief Get Channel 6 transfer error flag.
+ * @rmtoll ISR TEIF6 LL_DMA_IsActiveFlag_TE6
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE6(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_TEIF6) == (DMA_ISR_TEIF6));
+}
+#endif
+
+#if defined(DMA1_Channel7)
+/**
+ * @brief Get Channel 7 transfer error flag.
+ * @rmtoll ISR TEIF7 LL_DMA_IsActiveFlag_TE7
+ * @param DMAx DMAx Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE7(DMA_TypeDef *DMAx)
+{
+ return (READ_BIT(DMAx->ISR, DMA_ISR_TEIF7) == (DMA_ISR_TEIF7));
+}
+#endif
+
+/**
+ * @brief Clear Channel 1 global interrupt flag.
+ * @rmtoll IFCR CGIF1 LL_DMA_ClearFlag_GI1
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_GI1(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF1);
+}
+
+/**
+ * @brief Clear Channel 2 global interrupt flag.
+ * @rmtoll IFCR CGIF2 LL_DMA_ClearFlag_GI2
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_GI2(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF2);
+}
+
+/**
+ * @brief Clear Channel 3 global interrupt flag.
+ * @rmtoll IFCR CGIF3 LL_DMA_ClearFlag_GI3
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_GI3(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF3);
+}
+
+/**
+ * @brief Clear Channel 4 global interrupt flag.
+ * @rmtoll IFCR CGIF4 LL_DMA_ClearFlag_GI4
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_GI4(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF4);
+}
+
+/**
+ * @brief Clear Channel 5 global interrupt flag.
+ * @rmtoll IFCR CGIF5 LL_DMA_ClearFlag_GI5
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_GI5(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF5);
+}
+
+#if defined(DMA1_Channel6)
+/**
+ * @brief Clear Channel 6 global interrupt flag.
+ * @rmtoll IFCR CGIF6 LL_DMA_ClearFlag_GI6
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_GI6(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF6);
+}
+#endif
+
+#if defined(DMA1_Channel7)
+/**
+ * @brief Clear Channel 7 global interrupt flag.
+ * @rmtoll IFCR CGIF7 LL_DMA_ClearFlag_GI7
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_GI7(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF7);
+}
+#endif
+
+/**
+ * @brief Clear Channel 1 transfer complete flag.
+ * @rmtoll IFCR CTCIF1 LL_DMA_ClearFlag_TC1
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_TC1(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF1);
+}
+
+/**
+ * @brief Clear Channel 2 transfer complete flag.
+ * @rmtoll IFCR CTCIF2 LL_DMA_ClearFlag_TC2
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_TC2(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF2);
+}
+
+/**
+ * @brief Clear Channel 3 transfer complete flag.
+ * @rmtoll IFCR CTCIF3 LL_DMA_ClearFlag_TC3
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_TC3(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF3);
+}
+
+/**
+ * @brief Clear Channel 4 transfer complete flag.
+ * @rmtoll IFCR CTCIF4 LL_DMA_ClearFlag_TC4
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_TC4(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF4);
+}
+
+/**
+ * @brief Clear Channel 5 transfer complete flag.
+ * @rmtoll IFCR CTCIF5 LL_DMA_ClearFlag_TC5
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_TC5(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF5);
+}
+
+#if defined(DMA1_Channel6)
+/**
+ * @brief Clear Channel 6 transfer complete flag.
+ * @rmtoll IFCR CTCIF6 LL_DMA_ClearFlag_TC6
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_TC6(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF6);
+}
+#endif
+
+#if defined(DMA1_Channel7)
+/**
+ * @brief Clear Channel 7 transfer complete flag.
+ * @rmtoll IFCR CTCIF7 LL_DMA_ClearFlag_TC7
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_TC7(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF7);
+}
+#endif
+
+/**
+ * @brief Clear Channel 1 half transfer flag.
+ * @rmtoll IFCR CHTIF1 LL_DMA_ClearFlag_HT1
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_HT1(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF1);
+}
+
+/**
+ * @brief Clear Channel 2 half transfer flag.
+ * @rmtoll IFCR CHTIF2 LL_DMA_ClearFlag_HT2
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_HT2(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF2);
+}
+
+/**
+ * @brief Clear Channel 3 half transfer flag.
+ * @rmtoll IFCR CHTIF3 LL_DMA_ClearFlag_HT3
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_HT3(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF3);
+}
+
+/**
+ * @brief Clear Channel 4 half transfer flag.
+ * @rmtoll IFCR CHTIF4 LL_DMA_ClearFlag_HT4
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_HT4(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF4);
+}
+
+/**
+ * @brief Clear Channel 5 half transfer flag.
+ * @rmtoll IFCR CHTIF5 LL_DMA_ClearFlag_HT5
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_HT5(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF5);
+}
+
+#if defined(DMA1_Channel6)
+/**
+ * @brief Clear Channel 6 half transfer flag.
+ * @rmtoll IFCR CHTIF6 LL_DMA_ClearFlag_HT6
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_HT6(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF6);
+}
+#endif
+
+#if defined(DMA1_Channel7)
+/**
+ * @brief Clear Channel 7 half transfer flag.
+ * @rmtoll IFCR CHTIF7 LL_DMA_ClearFlag_HT7
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_HT7(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF7);
+}
+#endif
+
+/**
+ * @brief Clear Channel 1 transfer error flag.
+ * @rmtoll IFCR CTEIF1 LL_DMA_ClearFlag_TE1
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_TE1(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF1);
+}
+
+/**
+ * @brief Clear Channel 2 transfer error flag.
+ * @rmtoll IFCR CTEIF2 LL_DMA_ClearFlag_TE2
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_TE2(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF2);
+}
+
+/**
+ * @brief Clear Channel 3 transfer error flag.
+ * @rmtoll IFCR CTEIF3 LL_DMA_ClearFlag_TE3
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_TE3(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF3);
+}
+
+/**
+ * @brief Clear Channel 4 transfer error flag.
+ * @rmtoll IFCR CTEIF4 LL_DMA_ClearFlag_TE4
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_TE4(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF4);
+}
+
+/**
+ * @brief Clear Channel 5 transfer error flag.
+ * @rmtoll IFCR CTEIF5 LL_DMA_ClearFlag_TE5
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_TE5(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF5);
+}
+
+#if defined(DMA1_Channel6)
+/**
+ * @brief Clear Channel 6 transfer error flag.
+ * @rmtoll IFCR CTEIF6 LL_DMA_ClearFlag_TE6
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_TE6(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF6);
+}
+#endif
+
+#if defined(DMA1_Channel7)
+/**
+ * @brief Clear Channel 7 transfer error flag.
+ * @rmtoll IFCR CTEIF7 LL_DMA_ClearFlag_TE7
+ * @param DMAx DMAx Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_ClearFlag_TE7(DMA_TypeDef *DMAx)
+{
+ WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF7);
+}
+#endif
+
+/**
+ * @}
+ */
+
+/** @defgroup DMA_LL_EF_IT_Management IT_Management
+ * @{
+ */
+/**
+ * @brief Enable Transfer complete interrupt.
+ * @rmtoll CCR TCIE LL_DMA_EnableIT_TC
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_EnableIT_TC(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+ SET_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_TCIE);
+}
+
+/**
+ * @brief Enable Half transfer interrupt.
+ * @rmtoll CCR HTIE LL_DMA_EnableIT_HT
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_EnableIT_HT(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+ SET_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_HTIE);
+}
+
+/**
+ * @brief Enable Transfer error interrupt.
+ * @rmtoll CCR TEIE LL_DMA_EnableIT_TE
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_EnableIT_TE(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+ SET_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_TEIE);
+}
+
+/**
+ * @brief Disable Transfer complete interrupt.
+ * @rmtoll CCR TCIE LL_DMA_DisableIT_TC
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_DisableIT_TC(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+ CLEAR_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_TCIE);
+}
+
+/**
+ * @brief Disable Half transfer interrupt.
+ * @rmtoll CCR HTIE LL_DMA_DisableIT_HT
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_DisableIT_HT(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+ CLEAR_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_HTIE);
+}
+
+/**
+ * @brief Disable Transfer error interrupt.
+ * @rmtoll CCR TEIE LL_DMA_DisableIT_TE
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @retval None
+ */
+__STATIC_INLINE void LL_DMA_DisableIT_TE(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+ CLEAR_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR, DMA_CCR_TEIE);
+}
+
+/**
+ * @brief Check if Transfer complete Interrupt is enabled.
+ * @rmtoll CCR TCIE LL_DMA_IsEnabledIT_TC
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_TC(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+ return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR,
+ DMA_CCR_TCIE) == (DMA_CCR_TCIE));
+}
+
+/**
+ * @brief Check if Half transfer Interrupt is enabled.
+ * @rmtoll CCR HTIE LL_DMA_IsEnabledIT_HT
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_HT(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+ return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR,
+ DMA_CCR_HTIE) == (DMA_CCR_HTIE));
+}
+
+/**
+ * @brief Check if Transfer error Interrupt is enabled.
+ * @rmtoll CCR TEIE LL_DMA_IsEnabledIT_TE
+ * @param DMAx DMAx Instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_DMA_CHANNEL_1
+ * @arg @ref LL_DMA_CHANNEL_2
+ * @arg @ref LL_DMA_CHANNEL_3
+ * @arg @ref LL_DMA_CHANNEL_4
+ * @arg @ref LL_DMA_CHANNEL_5
+ * @arg @ref LL_DMA_CHANNEL_6
+ * @arg @ref LL_DMA_CHANNEL_7
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_TE(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+ return (READ_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1U])))->CCR,
+ DMA_CCR_TEIE) == (DMA_CCR_TEIE));
+}
+
+/**
+ * @}
+ */
+
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup DMA_LL_EF_Init Initialization and de-initialization functions
+ * @{
+ */
+
+uint32_t LL_DMA_Init(DMA_TypeDef *DMAx, uint32_t Channel, LL_DMA_InitTypeDef *DMA_InitStruct);
+uint32_t LL_DMA_DeInit(DMA_TypeDef *DMAx, uint32_t Channel);
+void LL_DMA_StructInit(LL_DMA_InitTypeDef *DMA_InitStruct);
+
+/**
+ * @}
+ */
+#endif /* USE_FULL_LL_DRIVER */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* DMA1 || DMA2 */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_LL_DMA_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_exti.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_exti.h
new file mode 100644
index 0000000..b26dc0a
--- /dev/null
+++ b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_exti.h
@@ -0,0 +1,1016 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_ll_exti.h
+ * @author MCD Application Team
+ * @brief Header file of EXTI LL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_LL_EXTI_H
+#define __STM32F0xx_LL_EXTI_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx.h"
+
+/** @addtogroup STM32F0xx_LL_Driver
+ * @{
+ */
+
+#if defined (EXTI)
+
+/** @defgroup EXTI_LL EXTI
+ * @{
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private Macros ------------------------------------------------------------*/
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup EXTI_LL_Private_Macros EXTI Private Macros
+ * @{
+ */
+/**
+ * @}
+ */
+#endif /*USE_FULL_LL_DRIVER*/
+/* Exported types ------------------------------------------------------------*/
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup EXTI_LL_ES_INIT EXTI Exported Init structure
+ * @{
+ */
+typedef struct
+{
+
+ uint32_t Line_0_31; /*!< Specifies the EXTI lines to be enabled or disabled for Lines in range 0 to 31
+ This parameter can be any combination of @ref EXTI_LL_EC_LINE */
+
+ FunctionalState LineCommand; /*!< Specifies the new state of the selected EXTI lines.
+ This parameter can be set either to ENABLE or DISABLE */
+
+ uint8_t Mode; /*!< Specifies the mode for the EXTI lines.
+ This parameter can be a value of @ref EXTI_LL_EC_MODE. */
+
+ uint8_t Trigger; /*!< Specifies the trigger signal active edge for the EXTI lines.
+ This parameter can be a value of @ref EXTI_LL_EC_TRIGGER. */
+} LL_EXTI_InitTypeDef;
+
+/**
+ * @}
+ */
+#endif /*USE_FULL_LL_DRIVER*/
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup EXTI_LL_Exported_Constants EXTI Exported Constants
+ * @{
+ */
+
+/** @defgroup EXTI_LL_EC_LINE LINE
+ * @{
+ */
+#define LL_EXTI_LINE_0 EXTI_IMR_IM0 /*!< Extended line 0 */
+#define LL_EXTI_LINE_1 EXTI_IMR_IM1 /*!< Extended line 1 */
+#define LL_EXTI_LINE_2 EXTI_IMR_IM2 /*!< Extended line 2 */
+#define LL_EXTI_LINE_3 EXTI_IMR_IM3 /*!< Extended line 3 */
+#define LL_EXTI_LINE_4 EXTI_IMR_IM4 /*!< Extended line 4 */
+#define LL_EXTI_LINE_5 EXTI_IMR_IM5 /*!< Extended line 5 */
+#define LL_EXTI_LINE_6 EXTI_IMR_IM6 /*!< Extended line 6 */
+#define LL_EXTI_LINE_7 EXTI_IMR_IM7 /*!< Extended line 7 */
+#define LL_EXTI_LINE_8 EXTI_IMR_IM8 /*!< Extended line 8 */
+#define LL_EXTI_LINE_9 EXTI_IMR_IM9 /*!< Extended line 9 */
+#define LL_EXTI_LINE_10 EXTI_IMR_IM10 /*!< Extended line 10 */
+#define LL_EXTI_LINE_11 EXTI_IMR_IM11 /*!< Extended line 11 */
+#define LL_EXTI_LINE_12 EXTI_IMR_IM12 /*!< Extended line 12 */
+#define LL_EXTI_LINE_13 EXTI_IMR_IM13 /*!< Extended line 13 */
+#define LL_EXTI_LINE_14 EXTI_IMR_IM14 /*!< Extended line 14 */
+#define LL_EXTI_LINE_15 EXTI_IMR_IM15 /*!< Extended line 15 */
+#if defined(EXTI_IMR_IM16)
+#define LL_EXTI_LINE_16 EXTI_IMR_IM16 /*!< Extended line 16 */
+#endif
+#define LL_EXTI_LINE_17 EXTI_IMR_IM17 /*!< Extended line 17 */
+#if defined(EXTI_IMR_IM18)
+#define LL_EXTI_LINE_18 EXTI_IMR_IM18 /*!< Extended line 18 */
+#endif
+#define LL_EXTI_LINE_19 EXTI_IMR_IM19 /*!< Extended line 19 */
+#if defined(EXTI_IMR_IM20)
+#define LL_EXTI_LINE_20 EXTI_IMR_IM20 /*!< Extended line 20 */
+#endif
+#if defined(EXTI_IMR_IM21)
+#define LL_EXTI_LINE_21 EXTI_IMR_IM21 /*!< Extended line 21 */
+#endif
+#if defined(EXTI_IMR_IM22)
+#define LL_EXTI_LINE_22 EXTI_IMR_IM22 /*!< Extended line 22 */
+#endif
+#define LL_EXTI_LINE_23 EXTI_IMR_IM23 /*!< Extended line 23 */
+#if defined(EXTI_IMR_IM24)
+#define LL_EXTI_LINE_24 EXTI_IMR_IM24 /*!< Extended line 24 */
+#endif
+#if defined(EXTI_IMR_IM25)
+#define LL_EXTI_LINE_25 EXTI_IMR_IM25 /*!< Extended line 25 */
+#endif
+#if defined(EXTI_IMR_IM26)
+#define LL_EXTI_LINE_26 EXTI_IMR_IM26 /*!< Extended line 26 */
+#endif
+#if defined(EXTI_IMR_IM27)
+#define LL_EXTI_LINE_27 EXTI_IMR_IM27 /*!< Extended line 27 */
+#endif
+#if defined(EXTI_IMR_IM28)
+#define LL_EXTI_LINE_28 EXTI_IMR_IM28 /*!< Extended line 28 */
+#endif
+#if defined(EXTI_IMR_IM29)
+#define LL_EXTI_LINE_29 EXTI_IMR_IM29 /*!< Extended line 29 */
+#endif
+#if defined(EXTI_IMR_IM30)
+#define LL_EXTI_LINE_30 EXTI_IMR_IM30 /*!< Extended line 30 */
+#endif
+#if defined(EXTI_IMR_IM31)
+#define LL_EXTI_LINE_31 EXTI_IMR_IM31 /*!< Extended line 31 */
+#endif
+#define LL_EXTI_LINE_ALL_0_31 EXTI_IMR_IM /*!< All Extended line not reserved*/
+
+
+#define LL_EXTI_LINE_ALL (0xFFFFFFFFU) /*!< All Extended line */
+
+#if defined(USE_FULL_LL_DRIVER)
+#define LL_EXTI_LINE_NONE (0x00000000U) /*!< None Extended line */
+#endif /*USE_FULL_LL_DRIVER*/
+
+/**
+ * @}
+ */
+#if defined(USE_FULL_LL_DRIVER)
+
+/** @defgroup EXTI_LL_EC_MODE Mode
+ * @{
+ */
+#define LL_EXTI_MODE_IT ((uint8_t)0x00U) /*!< Interrupt Mode */
+#define LL_EXTI_MODE_EVENT ((uint8_t)0x01U) /*!< Event Mode */
+#define LL_EXTI_MODE_IT_EVENT ((uint8_t)0x02U) /*!< Interrupt & Event Mode */
+/**
+ * @}
+ */
+
+/** @defgroup EXTI_LL_EC_TRIGGER Edge Trigger
+ * @{
+ */
+#define LL_EXTI_TRIGGER_NONE ((uint8_t)0x00U) /*!< No Trigger Mode */
+#define LL_EXTI_TRIGGER_RISING ((uint8_t)0x01U) /*!< Trigger Rising Mode */
+#define LL_EXTI_TRIGGER_FALLING ((uint8_t)0x02U) /*!< Trigger Falling Mode */
+#define LL_EXTI_TRIGGER_RISING_FALLING ((uint8_t)0x03U) /*!< Trigger Rising & Falling Mode */
+
+/**
+ * @}
+ */
+
+
+#endif /*USE_FULL_LL_DRIVER*/
+
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup EXTI_LL_Exported_Macros EXTI Exported Macros
+ * @{
+ */
+
+/** @defgroup EXTI_LL_EM_WRITE_READ Common Write and read registers Macros
+ * @{
+ */
+
+/**
+ * @brief Write a value in EXTI register
+ * @param __REG__ Register to be written
+ * @param __VALUE__ Value to be written in the register
+ * @retval None
+ */
+#define LL_EXTI_WriteReg(__REG__, __VALUE__) WRITE_REG(EXTI->__REG__, (__VALUE__))
+
+/**
+ * @brief Read a value in EXTI register
+ * @param __REG__ Register to be read
+ * @retval Register value
+ */
+#define LL_EXTI_ReadReg(__REG__) READ_REG(EXTI->__REG__)
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup EXTI_LL_Exported_Functions EXTI Exported Functions
+ * @{
+ */
+/** @defgroup EXTI_LL_EF_IT_Management IT_Management
+ * @{
+ */
+
+/**
+ * @brief Enable ExtiLine Interrupt request for Lines in range 0 to 31
+ * @note The reset value for the direct or internal lines (see RM)
+ * is set to 1 in order to enable the interrupt by default.
+ * Bits are set automatically at Power on.
+ * @rmtoll IMR IMx LL_EXTI_EnableIT_0_31
+ * @param ExtiLine This parameter can be one of the following values:
+ * @arg @ref LL_EXTI_LINE_0
+ * @arg @ref LL_EXTI_LINE_1
+ * @arg @ref LL_EXTI_LINE_2
+ * @arg @ref LL_EXTI_LINE_3
+ * @arg @ref LL_EXTI_LINE_4
+ * @arg @ref LL_EXTI_LINE_5
+ * @arg @ref LL_EXTI_LINE_6
+ * @arg @ref LL_EXTI_LINE_7
+ * @arg @ref LL_EXTI_LINE_8
+ * @arg @ref LL_EXTI_LINE_9
+ * @arg @ref LL_EXTI_LINE_10
+ * @arg @ref LL_EXTI_LINE_11
+ * @arg @ref LL_EXTI_LINE_12
+ * @arg @ref LL_EXTI_LINE_13
+ * @arg @ref LL_EXTI_LINE_14
+ * @arg @ref LL_EXTI_LINE_15
+ * @arg @ref LL_EXTI_LINE_16
+ * @arg @ref LL_EXTI_LINE_17
+ * @arg @ref LL_EXTI_LINE_18
+ * @arg @ref LL_EXTI_LINE_19
+ * @arg @ref LL_EXTI_LINE_20
+ * @arg @ref LL_EXTI_LINE_21
+ * @arg @ref LL_EXTI_LINE_22
+ * @arg @ref LL_EXTI_LINE_23
+ * @arg @ref LL_EXTI_LINE_24
+ * @arg @ref LL_EXTI_LINE_25
+ * @arg @ref LL_EXTI_LINE_26
+ * @arg @ref LL_EXTI_LINE_27
+ * @arg @ref LL_EXTI_LINE_28
+ * @arg @ref LL_EXTI_LINE_29
+ * @arg @ref LL_EXTI_LINE_30
+ * @arg @ref LL_EXTI_LINE_31
+ * @arg @ref LL_EXTI_LINE_ALL_0_31
+ * @note Please check each device line mapping for EXTI Line availability
+ * @retval None
+ */
+__STATIC_INLINE void LL_EXTI_EnableIT_0_31(uint32_t ExtiLine)
+{
+ SET_BIT(EXTI->IMR, ExtiLine);
+}
+
+/**
+ * @brief Disable ExtiLine Interrupt request for Lines in range 0 to 31
+ * @note The reset value for the direct or internal lines (see RM)
+ * is set to 1 in order to enable the interrupt by default.
+ * Bits are set automatically at Power on.
+ * @rmtoll IMR IMx LL_EXTI_DisableIT_0_31
+ * @param ExtiLine This parameter can be one of the following values:
+ * @arg @ref LL_EXTI_LINE_0
+ * @arg @ref LL_EXTI_LINE_1
+ * @arg @ref LL_EXTI_LINE_2
+ * @arg @ref LL_EXTI_LINE_3
+ * @arg @ref LL_EXTI_LINE_4
+ * @arg @ref LL_EXTI_LINE_5
+ * @arg @ref LL_EXTI_LINE_6
+ * @arg @ref LL_EXTI_LINE_7
+ * @arg @ref LL_EXTI_LINE_8
+ * @arg @ref LL_EXTI_LINE_9
+ * @arg @ref LL_EXTI_LINE_10
+ * @arg @ref LL_EXTI_LINE_11
+ * @arg @ref LL_EXTI_LINE_12
+ * @arg @ref LL_EXTI_LINE_13
+ * @arg @ref LL_EXTI_LINE_14
+ * @arg @ref LL_EXTI_LINE_15
+ * @arg @ref LL_EXTI_LINE_16
+ * @arg @ref LL_EXTI_LINE_17
+ * @arg @ref LL_EXTI_LINE_18
+ * @arg @ref LL_EXTI_LINE_19
+ * @arg @ref LL_EXTI_LINE_20
+ * @arg @ref LL_EXTI_LINE_21
+ * @arg @ref LL_EXTI_LINE_22
+ * @arg @ref LL_EXTI_LINE_23
+ * @arg @ref LL_EXTI_LINE_24
+ * @arg @ref LL_EXTI_LINE_25
+ * @arg @ref LL_EXTI_LINE_26
+ * @arg @ref LL_EXTI_LINE_27
+ * @arg @ref LL_EXTI_LINE_28
+ * @arg @ref LL_EXTI_LINE_29
+ * @arg @ref LL_EXTI_LINE_30
+ * @arg @ref LL_EXTI_LINE_31
+ * @arg @ref LL_EXTI_LINE_ALL_0_31
+ * @note Please check each device line mapping for EXTI Line availability
+ * @retval None
+ */
+__STATIC_INLINE void LL_EXTI_DisableIT_0_31(uint32_t ExtiLine)
+{
+ CLEAR_BIT(EXTI->IMR, ExtiLine);
+}
+
+
+/**
+ * @brief Indicate if ExtiLine Interrupt request is enabled for Lines in range 0 to 31
+ * @note The reset value for the direct or internal lines (see RM)
+ * is set to 1 in order to enable the interrupt by default.
+ * Bits are set automatically at Power on.
+ * @rmtoll IMR IMx LL_EXTI_IsEnabledIT_0_31
+ * @param ExtiLine This parameter can be one of the following values:
+ * @arg @ref LL_EXTI_LINE_0
+ * @arg @ref LL_EXTI_LINE_1
+ * @arg @ref LL_EXTI_LINE_2
+ * @arg @ref LL_EXTI_LINE_3
+ * @arg @ref LL_EXTI_LINE_4
+ * @arg @ref LL_EXTI_LINE_5
+ * @arg @ref LL_EXTI_LINE_6
+ * @arg @ref LL_EXTI_LINE_7
+ * @arg @ref LL_EXTI_LINE_8
+ * @arg @ref LL_EXTI_LINE_9
+ * @arg @ref LL_EXTI_LINE_10
+ * @arg @ref LL_EXTI_LINE_11
+ * @arg @ref LL_EXTI_LINE_12
+ * @arg @ref LL_EXTI_LINE_13
+ * @arg @ref LL_EXTI_LINE_14
+ * @arg @ref LL_EXTI_LINE_15
+ * @arg @ref LL_EXTI_LINE_16
+ * @arg @ref LL_EXTI_LINE_17
+ * @arg @ref LL_EXTI_LINE_18
+ * @arg @ref LL_EXTI_LINE_19
+ * @arg @ref LL_EXTI_LINE_20
+ * @arg @ref LL_EXTI_LINE_21
+ * @arg @ref LL_EXTI_LINE_22
+ * @arg @ref LL_EXTI_LINE_23
+ * @arg @ref LL_EXTI_LINE_24
+ * @arg @ref LL_EXTI_LINE_25
+ * @arg @ref LL_EXTI_LINE_26
+ * @arg @ref LL_EXTI_LINE_27
+ * @arg @ref LL_EXTI_LINE_28
+ * @arg @ref LL_EXTI_LINE_29
+ * @arg @ref LL_EXTI_LINE_30
+ * @arg @ref LL_EXTI_LINE_31
+ * @arg @ref LL_EXTI_LINE_ALL_0_31
+ * @note Please check each device line mapping for EXTI Line availability
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_EXTI_IsEnabledIT_0_31(uint32_t ExtiLine)
+{
+ return (READ_BIT(EXTI->IMR, ExtiLine) == (ExtiLine));
+}
+
+
+/**
+ * @}
+ */
+
+/** @defgroup EXTI_LL_EF_Event_Management Event_Management
+ * @{
+ */
+
+/**
+ * @brief Enable ExtiLine Event request for Lines in range 0 to 31
+ * @rmtoll EMR EMx LL_EXTI_EnableEvent_0_31
+ * @param ExtiLine This parameter can be one of the following values:
+ * @arg @ref LL_EXTI_LINE_0
+ * @arg @ref LL_EXTI_LINE_1
+ * @arg @ref LL_EXTI_LINE_2
+ * @arg @ref LL_EXTI_LINE_3
+ * @arg @ref LL_EXTI_LINE_4
+ * @arg @ref LL_EXTI_LINE_5
+ * @arg @ref LL_EXTI_LINE_6
+ * @arg @ref LL_EXTI_LINE_7
+ * @arg @ref LL_EXTI_LINE_8
+ * @arg @ref LL_EXTI_LINE_9
+ * @arg @ref LL_EXTI_LINE_10
+ * @arg @ref LL_EXTI_LINE_11
+ * @arg @ref LL_EXTI_LINE_12
+ * @arg @ref LL_EXTI_LINE_13
+ * @arg @ref LL_EXTI_LINE_14
+ * @arg @ref LL_EXTI_LINE_15
+ * @arg @ref LL_EXTI_LINE_16
+ * @arg @ref LL_EXTI_LINE_17
+ * @arg @ref LL_EXTI_LINE_18
+ * @arg @ref LL_EXTI_LINE_19
+ * @arg @ref LL_EXTI_LINE_20
+ * @arg @ref LL_EXTI_LINE_21
+ * @arg @ref LL_EXTI_LINE_22
+ * @arg @ref LL_EXTI_LINE_23
+ * @arg @ref LL_EXTI_LINE_24
+ * @arg @ref LL_EXTI_LINE_25
+ * @arg @ref LL_EXTI_LINE_26
+ * @arg @ref LL_EXTI_LINE_27
+ * @arg @ref LL_EXTI_LINE_28
+ * @arg @ref LL_EXTI_LINE_29
+ * @arg @ref LL_EXTI_LINE_30
+ * @arg @ref LL_EXTI_LINE_31
+ * @arg @ref LL_EXTI_LINE_ALL_0_31
+ * @note Please check each device line mapping for EXTI Line availability
+ * @retval None
+ */
+__STATIC_INLINE void LL_EXTI_EnableEvent_0_31(uint32_t ExtiLine)
+{
+ SET_BIT(EXTI->EMR, ExtiLine);
+
+}
+
+
+/**
+ * @brief Disable ExtiLine Event request for Lines in range 0 to 31
+ * @rmtoll EMR EMx LL_EXTI_DisableEvent_0_31
+ * @param ExtiLine This parameter can be one of the following values:
+ * @arg @ref LL_EXTI_LINE_0
+ * @arg @ref LL_EXTI_LINE_1
+ * @arg @ref LL_EXTI_LINE_2
+ * @arg @ref LL_EXTI_LINE_3
+ * @arg @ref LL_EXTI_LINE_4
+ * @arg @ref LL_EXTI_LINE_5
+ * @arg @ref LL_EXTI_LINE_6
+ * @arg @ref LL_EXTI_LINE_7
+ * @arg @ref LL_EXTI_LINE_8
+ * @arg @ref LL_EXTI_LINE_9
+ * @arg @ref LL_EXTI_LINE_10
+ * @arg @ref LL_EXTI_LINE_11
+ * @arg @ref LL_EXTI_LINE_12
+ * @arg @ref LL_EXTI_LINE_13
+ * @arg @ref LL_EXTI_LINE_14
+ * @arg @ref LL_EXTI_LINE_15
+ * @arg @ref LL_EXTI_LINE_16
+ * @arg @ref LL_EXTI_LINE_17
+ * @arg @ref LL_EXTI_LINE_18
+ * @arg @ref LL_EXTI_LINE_19
+ * @arg @ref LL_EXTI_LINE_20
+ * @arg @ref LL_EXTI_LINE_21
+ * @arg @ref LL_EXTI_LINE_22
+ * @arg @ref LL_EXTI_LINE_23
+ * @arg @ref LL_EXTI_LINE_24
+ * @arg @ref LL_EXTI_LINE_25
+ * @arg @ref LL_EXTI_LINE_26
+ * @arg @ref LL_EXTI_LINE_27
+ * @arg @ref LL_EXTI_LINE_28
+ * @arg @ref LL_EXTI_LINE_29
+ * @arg @ref LL_EXTI_LINE_30
+ * @arg @ref LL_EXTI_LINE_31
+ * @arg @ref LL_EXTI_LINE_ALL_0_31
+ * @note Please check each device line mapping for EXTI Line availability
+ * @retval None
+ */
+__STATIC_INLINE void LL_EXTI_DisableEvent_0_31(uint32_t ExtiLine)
+{
+ CLEAR_BIT(EXTI->EMR, ExtiLine);
+}
+
+
+/**
+ * @brief Indicate if ExtiLine Event request is enabled for Lines in range 0 to 31
+ * @rmtoll EMR EMx LL_EXTI_IsEnabledEvent_0_31
+ * @param ExtiLine This parameter can be one of the following values:
+ * @arg @ref LL_EXTI_LINE_0
+ * @arg @ref LL_EXTI_LINE_1
+ * @arg @ref LL_EXTI_LINE_2
+ * @arg @ref LL_EXTI_LINE_3
+ * @arg @ref LL_EXTI_LINE_4
+ * @arg @ref LL_EXTI_LINE_5
+ * @arg @ref LL_EXTI_LINE_6
+ * @arg @ref LL_EXTI_LINE_7
+ * @arg @ref LL_EXTI_LINE_8
+ * @arg @ref LL_EXTI_LINE_9
+ * @arg @ref LL_EXTI_LINE_10
+ * @arg @ref LL_EXTI_LINE_11
+ * @arg @ref LL_EXTI_LINE_12
+ * @arg @ref LL_EXTI_LINE_13
+ * @arg @ref LL_EXTI_LINE_14
+ * @arg @ref LL_EXTI_LINE_15
+ * @arg @ref LL_EXTI_LINE_16
+ * @arg @ref LL_EXTI_LINE_17
+ * @arg @ref LL_EXTI_LINE_18
+ * @arg @ref LL_EXTI_LINE_19
+ * @arg @ref LL_EXTI_LINE_20
+ * @arg @ref LL_EXTI_LINE_21
+ * @arg @ref LL_EXTI_LINE_22
+ * @arg @ref LL_EXTI_LINE_23
+ * @arg @ref LL_EXTI_LINE_24
+ * @arg @ref LL_EXTI_LINE_25
+ * @arg @ref LL_EXTI_LINE_26
+ * @arg @ref LL_EXTI_LINE_27
+ * @arg @ref LL_EXTI_LINE_28
+ * @arg @ref LL_EXTI_LINE_29
+ * @arg @ref LL_EXTI_LINE_30
+ * @arg @ref LL_EXTI_LINE_31
+ * @arg @ref LL_EXTI_LINE_ALL_0_31
+ * @note Please check each device line mapping for EXTI Line availability
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_EXTI_IsEnabledEvent_0_31(uint32_t ExtiLine)
+{
+ return (READ_BIT(EXTI->EMR, ExtiLine) == (ExtiLine));
+
+}
+
+
+/**
+ * @}
+ */
+
+/** @defgroup EXTI_LL_EF_Rising_Trigger_Management Rising_Trigger_Management
+ * @{
+ */
+
+/**
+ * @brief Enable ExtiLine Rising Edge Trigger for Lines in range 0 to 31
+ * @note The configurable wakeup lines are edge-triggered. No glitch must be
+ * generated on these lines. If a rising edge on a configurable interrupt
+ * line occurs during a write operation in the EXTI_RTSR register, the
+ * pending bit is not set.
+ * Rising and falling edge triggers can be set for
+ * the same interrupt line. In this case, both generate a trigger
+ * condition.
+ * @rmtoll RTSR RTx LL_EXTI_EnableRisingTrig_0_31
+ * @param ExtiLine This parameter can be a combination of the following values:
+ * @arg @ref LL_EXTI_LINE_0
+ * @arg @ref LL_EXTI_LINE_1
+ * @arg @ref LL_EXTI_LINE_2
+ * @arg @ref LL_EXTI_LINE_3
+ * @arg @ref LL_EXTI_LINE_4
+ * @arg @ref LL_EXTI_LINE_5
+ * @arg @ref LL_EXTI_LINE_6
+ * @arg @ref LL_EXTI_LINE_7
+ * @arg @ref LL_EXTI_LINE_8
+ * @arg @ref LL_EXTI_LINE_9
+ * @arg @ref LL_EXTI_LINE_10
+ * @arg @ref LL_EXTI_LINE_11
+ * @arg @ref LL_EXTI_LINE_12
+ * @arg @ref LL_EXTI_LINE_13
+ * @arg @ref LL_EXTI_LINE_14
+ * @arg @ref LL_EXTI_LINE_15
+ * @arg @ref LL_EXTI_LINE_16
+ * @arg @ref LL_EXTI_LINE_18
+ * @arg @ref LL_EXTI_LINE_19
+ * @arg @ref LL_EXTI_LINE_20
+ * @arg @ref LL_EXTI_LINE_21
+ * @arg @ref LL_EXTI_LINE_22
+ * @arg @ref LL_EXTI_LINE_29
+ * @arg @ref LL_EXTI_LINE_30
+ * @arg @ref LL_EXTI_LINE_31
+ * @note Please check each device line mapping for EXTI Line availability
+ * @retval None
+ */
+__STATIC_INLINE void LL_EXTI_EnableRisingTrig_0_31(uint32_t ExtiLine)
+{
+ SET_BIT(EXTI->RTSR, ExtiLine);
+
+}
+
+
+/**
+ * @brief Disable ExtiLine Rising Edge Trigger for Lines in range 0 to 31
+ * @note The configurable wakeup lines are edge-triggered. No glitch must be
+ * generated on these lines. If a rising edge on a configurable interrupt
+ * line occurs during a write operation in the EXTI_RTSR register, the
+ * pending bit is not set.
+ * Rising and falling edge triggers can be set for
+ * the same interrupt line. In this case, both generate a trigger
+ * condition.
+ * @rmtoll RTSR RTx LL_EXTI_DisableRisingTrig_0_31
+ * @param ExtiLine This parameter can be a combination of the following values:
+ * @arg @ref LL_EXTI_LINE_0
+ * @arg @ref LL_EXTI_LINE_1
+ * @arg @ref LL_EXTI_LINE_2
+ * @arg @ref LL_EXTI_LINE_3
+ * @arg @ref LL_EXTI_LINE_4
+ * @arg @ref LL_EXTI_LINE_5
+ * @arg @ref LL_EXTI_LINE_6
+ * @arg @ref LL_EXTI_LINE_7
+ * @arg @ref LL_EXTI_LINE_8
+ * @arg @ref LL_EXTI_LINE_9
+ * @arg @ref LL_EXTI_LINE_10
+ * @arg @ref LL_EXTI_LINE_11
+ * @arg @ref LL_EXTI_LINE_12
+ * @arg @ref LL_EXTI_LINE_13
+ * @arg @ref LL_EXTI_LINE_14
+ * @arg @ref LL_EXTI_LINE_15
+ * @arg @ref LL_EXTI_LINE_16
+ * @arg @ref LL_EXTI_LINE_18
+ * @arg @ref LL_EXTI_LINE_19
+ * @arg @ref LL_EXTI_LINE_20
+ * @arg @ref LL_EXTI_LINE_21
+ * @arg @ref LL_EXTI_LINE_22
+ * @arg @ref LL_EXTI_LINE_29
+ * @arg @ref LL_EXTI_LINE_30
+ * @arg @ref LL_EXTI_LINE_31
+ * @note Please check each device line mapping for EXTI Line availability
+ * @retval None
+ */
+__STATIC_INLINE void LL_EXTI_DisableRisingTrig_0_31(uint32_t ExtiLine)
+{
+ CLEAR_BIT(EXTI->RTSR, ExtiLine);
+
+}
+
+
+/**
+ * @brief Check if rising edge trigger is enabled for Lines in range 0 to 31
+ * @rmtoll RTSR RTx LL_EXTI_IsEnabledRisingTrig_0_31
+ * @param ExtiLine This parameter can be a combination of the following values:
+ * @arg @ref LL_EXTI_LINE_0
+ * @arg @ref LL_EXTI_LINE_1
+ * @arg @ref LL_EXTI_LINE_2
+ * @arg @ref LL_EXTI_LINE_3
+ * @arg @ref LL_EXTI_LINE_4
+ * @arg @ref LL_EXTI_LINE_5
+ * @arg @ref LL_EXTI_LINE_6
+ * @arg @ref LL_EXTI_LINE_7
+ * @arg @ref LL_EXTI_LINE_8
+ * @arg @ref LL_EXTI_LINE_9
+ * @arg @ref LL_EXTI_LINE_10
+ * @arg @ref LL_EXTI_LINE_11
+ * @arg @ref LL_EXTI_LINE_12
+ * @arg @ref LL_EXTI_LINE_13
+ * @arg @ref LL_EXTI_LINE_14
+ * @arg @ref LL_EXTI_LINE_15
+ * @arg @ref LL_EXTI_LINE_16
+ * @arg @ref LL_EXTI_LINE_18
+ * @arg @ref LL_EXTI_LINE_19
+ * @arg @ref LL_EXTI_LINE_20
+ * @arg @ref LL_EXTI_LINE_21
+ * @arg @ref LL_EXTI_LINE_22
+ * @arg @ref LL_EXTI_LINE_29
+ * @arg @ref LL_EXTI_LINE_30
+ * @arg @ref LL_EXTI_LINE_31
+ * @note Please check each device line mapping for EXTI Line availability
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_EXTI_IsEnabledRisingTrig_0_31(uint32_t ExtiLine)
+{
+ return (READ_BIT(EXTI->RTSR, ExtiLine) == (ExtiLine));
+}
+
+
+/**
+ * @}
+ */
+
+/** @defgroup EXTI_LL_EF_Falling_Trigger_Management Falling_Trigger_Management
+ * @{
+ */
+
+/**
+ * @brief Enable ExtiLine Falling Edge Trigger for Lines in range 0 to 31
+ * @note The configurable wakeup lines are edge-triggered. No glitch must be
+ * generated on these lines. If a falling edge on a configurable interrupt
+ * line occurs during a write operation in the EXTI_FTSR register, the
+ * pending bit is not set.
+ * Rising and falling edge triggers can be set for
+ * the same interrupt line. In this case, both generate a trigger
+ * condition.
+ * @rmtoll FTSR FTx LL_EXTI_EnableFallingTrig_0_31
+ * @param ExtiLine This parameter can be a combination of the following values:
+ * @arg @ref LL_EXTI_LINE_0
+ * @arg @ref LL_EXTI_LINE_1
+ * @arg @ref LL_EXTI_LINE_2
+ * @arg @ref LL_EXTI_LINE_3
+ * @arg @ref LL_EXTI_LINE_4
+ * @arg @ref LL_EXTI_LINE_5
+ * @arg @ref LL_EXTI_LINE_6
+ * @arg @ref LL_EXTI_LINE_7
+ * @arg @ref LL_EXTI_LINE_8
+ * @arg @ref LL_EXTI_LINE_9
+ * @arg @ref LL_EXTI_LINE_10
+ * @arg @ref LL_EXTI_LINE_11
+ * @arg @ref LL_EXTI_LINE_12
+ * @arg @ref LL_EXTI_LINE_13
+ * @arg @ref LL_EXTI_LINE_14
+ * @arg @ref LL_EXTI_LINE_15
+ * @arg @ref LL_EXTI_LINE_16
+ * @arg @ref LL_EXTI_LINE_18
+ * @arg @ref LL_EXTI_LINE_19
+ * @arg @ref LL_EXTI_LINE_20
+ * @arg @ref LL_EXTI_LINE_21
+ * @arg @ref LL_EXTI_LINE_22
+ * @arg @ref LL_EXTI_LINE_29
+ * @arg @ref LL_EXTI_LINE_30
+ * @arg @ref LL_EXTI_LINE_31
+ * @note Please check each device line mapping for EXTI Line availability
+ * @retval None
+ */
+__STATIC_INLINE void LL_EXTI_EnableFallingTrig_0_31(uint32_t ExtiLine)
+{
+ SET_BIT(EXTI->FTSR, ExtiLine);
+}
+
+
+/**
+ * @brief Disable ExtiLine Falling Edge Trigger for Lines in range 0 to 31
+ * @note The configurable wakeup lines are edge-triggered. No glitch must be
+ * generated on these lines. If a Falling edge on a configurable interrupt
+ * line occurs during a write operation in the EXTI_FTSR register, the
+ * pending bit is not set.
+ * Rising and falling edge triggers can be set for the same interrupt line.
+ * In this case, both generate a trigger condition.
+ * @rmtoll FTSR FTx LL_EXTI_DisableFallingTrig_0_31
+ * @param ExtiLine This parameter can be a combination of the following values:
+ * @arg @ref LL_EXTI_LINE_0
+ * @arg @ref LL_EXTI_LINE_1
+ * @arg @ref LL_EXTI_LINE_2
+ * @arg @ref LL_EXTI_LINE_3
+ * @arg @ref LL_EXTI_LINE_4
+ * @arg @ref LL_EXTI_LINE_5
+ * @arg @ref LL_EXTI_LINE_6
+ * @arg @ref LL_EXTI_LINE_7
+ * @arg @ref LL_EXTI_LINE_8
+ * @arg @ref LL_EXTI_LINE_9
+ * @arg @ref LL_EXTI_LINE_10
+ * @arg @ref LL_EXTI_LINE_11
+ * @arg @ref LL_EXTI_LINE_12
+ * @arg @ref LL_EXTI_LINE_13
+ * @arg @ref LL_EXTI_LINE_14
+ * @arg @ref LL_EXTI_LINE_15
+ * @arg @ref LL_EXTI_LINE_16
+ * @arg @ref LL_EXTI_LINE_18
+ * @arg @ref LL_EXTI_LINE_19
+ * @arg @ref LL_EXTI_LINE_20
+ * @arg @ref LL_EXTI_LINE_21
+ * @arg @ref LL_EXTI_LINE_22
+ * @arg @ref LL_EXTI_LINE_29
+ * @arg @ref LL_EXTI_LINE_30
+ * @arg @ref LL_EXTI_LINE_31
+ * @note Please check each device line mapping for EXTI Line availability
+ * @retval None
+ */
+__STATIC_INLINE void LL_EXTI_DisableFallingTrig_0_31(uint32_t ExtiLine)
+{
+ CLEAR_BIT(EXTI->FTSR, ExtiLine);
+}
+
+
+/**
+ * @brief Check if falling edge trigger is enabled for Lines in range 0 to 31
+ * @rmtoll FTSR FTx LL_EXTI_IsEnabledFallingTrig_0_31
+ * @param ExtiLine This parameter can be a combination of the following values:
+ * @arg @ref LL_EXTI_LINE_0
+ * @arg @ref LL_EXTI_LINE_1
+ * @arg @ref LL_EXTI_LINE_2
+ * @arg @ref LL_EXTI_LINE_3
+ * @arg @ref LL_EXTI_LINE_4
+ * @arg @ref LL_EXTI_LINE_5
+ * @arg @ref LL_EXTI_LINE_6
+ * @arg @ref LL_EXTI_LINE_7
+ * @arg @ref LL_EXTI_LINE_8
+ * @arg @ref LL_EXTI_LINE_9
+ * @arg @ref LL_EXTI_LINE_10
+ * @arg @ref LL_EXTI_LINE_11
+ * @arg @ref LL_EXTI_LINE_12
+ * @arg @ref LL_EXTI_LINE_13
+ * @arg @ref LL_EXTI_LINE_14
+ * @arg @ref LL_EXTI_LINE_15
+ * @arg @ref LL_EXTI_LINE_16
+ * @arg @ref LL_EXTI_LINE_18
+ * @arg @ref LL_EXTI_LINE_19
+ * @arg @ref LL_EXTI_LINE_20
+ * @arg @ref LL_EXTI_LINE_21
+ * @arg @ref LL_EXTI_LINE_22
+ * @arg @ref LL_EXTI_LINE_29
+ * @arg @ref LL_EXTI_LINE_30
+ * @arg @ref LL_EXTI_LINE_31
+ * @note Please check each device line mapping for EXTI Line availability
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_EXTI_IsEnabledFallingTrig_0_31(uint32_t ExtiLine)
+{
+ return (READ_BIT(EXTI->FTSR, ExtiLine) == (ExtiLine));
+}
+
+
+/**
+ * @}
+ */
+
+/** @defgroup EXTI_LL_EF_Software_Interrupt_Management Software_Interrupt_Management
+ * @{
+ */
+
+/**
+ * @brief Generate a software Interrupt Event for Lines in range 0 to 31
+ * @note If the interrupt is enabled on this line in the EXTI_IMR, writing a 1 to
+ * this bit when it is at '0' sets the corresponding pending bit in EXTI_PR
+ * resulting in an interrupt request generation.
+ * This bit is cleared by clearing the corresponding bit in the EXTI_PR
+ * register (by writing a 1 into the bit)
+ * @rmtoll SWIER SWIx LL_EXTI_GenerateSWI_0_31
+ * @param ExtiLine This parameter can be a combination of the following values:
+ * @arg @ref LL_EXTI_LINE_0
+ * @arg @ref LL_EXTI_LINE_1
+ * @arg @ref LL_EXTI_LINE_2
+ * @arg @ref LL_EXTI_LINE_3
+ * @arg @ref LL_EXTI_LINE_4
+ * @arg @ref LL_EXTI_LINE_5
+ * @arg @ref LL_EXTI_LINE_6
+ * @arg @ref LL_EXTI_LINE_7
+ * @arg @ref LL_EXTI_LINE_8
+ * @arg @ref LL_EXTI_LINE_9
+ * @arg @ref LL_EXTI_LINE_10
+ * @arg @ref LL_EXTI_LINE_11
+ * @arg @ref LL_EXTI_LINE_12
+ * @arg @ref LL_EXTI_LINE_13
+ * @arg @ref LL_EXTI_LINE_14
+ * @arg @ref LL_EXTI_LINE_15
+ * @arg @ref LL_EXTI_LINE_16
+ * @arg @ref LL_EXTI_LINE_18
+ * @arg @ref LL_EXTI_LINE_19
+ * @arg @ref LL_EXTI_LINE_20
+ * @arg @ref LL_EXTI_LINE_21
+ * @arg @ref LL_EXTI_LINE_22
+ * @arg @ref LL_EXTI_LINE_29
+ * @arg @ref LL_EXTI_LINE_30
+ * @arg @ref LL_EXTI_LINE_31
+ * @note Please check each device line mapping for EXTI Line availability
+ * @retval None
+ */
+__STATIC_INLINE void LL_EXTI_GenerateSWI_0_31(uint32_t ExtiLine)
+{
+ SET_BIT(EXTI->SWIER, ExtiLine);
+}
+
+
+/**
+ * @}
+ */
+
+/** @defgroup EXTI_LL_EF_Flag_Management Flag_Management
+ * @{
+ */
+
+/**
+ * @brief Check if the ExtLine Flag is set or not for Lines in range 0 to 31
+ * @note This bit is set when the selected edge event arrives on the interrupt
+ * line. This bit is cleared by writing a 1 to the bit.
+ * @rmtoll PR PIFx LL_EXTI_IsActiveFlag_0_31
+ * @param ExtiLine This parameter can be a combination of the following values:
+ * @arg @ref LL_EXTI_LINE_0
+ * @arg @ref LL_EXTI_LINE_1
+ * @arg @ref LL_EXTI_LINE_2
+ * @arg @ref LL_EXTI_LINE_3
+ * @arg @ref LL_EXTI_LINE_4
+ * @arg @ref LL_EXTI_LINE_5
+ * @arg @ref LL_EXTI_LINE_6
+ * @arg @ref LL_EXTI_LINE_7
+ * @arg @ref LL_EXTI_LINE_8
+ * @arg @ref LL_EXTI_LINE_9
+ * @arg @ref LL_EXTI_LINE_10
+ * @arg @ref LL_EXTI_LINE_11
+ * @arg @ref LL_EXTI_LINE_12
+ * @arg @ref LL_EXTI_LINE_13
+ * @arg @ref LL_EXTI_LINE_14
+ * @arg @ref LL_EXTI_LINE_15
+ * @arg @ref LL_EXTI_LINE_16
+ * @arg @ref LL_EXTI_LINE_18
+ * @arg @ref LL_EXTI_LINE_19
+ * @arg @ref LL_EXTI_LINE_20
+ * @arg @ref LL_EXTI_LINE_21
+ * @arg @ref LL_EXTI_LINE_22
+ * @arg @ref LL_EXTI_LINE_29
+ * @arg @ref LL_EXTI_LINE_30
+ * @arg @ref LL_EXTI_LINE_31
+ * @note Please check each device line mapping for EXTI Line availability
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_EXTI_IsActiveFlag_0_31(uint32_t ExtiLine)
+{
+ return (READ_BIT(EXTI->PR, ExtiLine) == (ExtiLine));
+}
+
+
+/**
+ * @brief Read ExtLine Combination Flag for Lines in range 0 to 31
+ * @note This bit is set when the selected edge event arrives on the interrupt
+ * line. This bit is cleared by writing a 1 to the bit.
+ * @rmtoll PR PIFx LL_EXTI_ReadFlag_0_31
+ * @param ExtiLine This parameter can be a combination of the following values:
+ * @arg @ref LL_EXTI_LINE_0
+ * @arg @ref LL_EXTI_LINE_1
+ * @arg @ref LL_EXTI_LINE_2
+ * @arg @ref LL_EXTI_LINE_3
+ * @arg @ref LL_EXTI_LINE_4
+ * @arg @ref LL_EXTI_LINE_5
+ * @arg @ref LL_EXTI_LINE_6
+ * @arg @ref LL_EXTI_LINE_7
+ * @arg @ref LL_EXTI_LINE_8
+ * @arg @ref LL_EXTI_LINE_9
+ * @arg @ref LL_EXTI_LINE_10
+ * @arg @ref LL_EXTI_LINE_11
+ * @arg @ref LL_EXTI_LINE_12
+ * @arg @ref LL_EXTI_LINE_13
+ * @arg @ref LL_EXTI_LINE_14
+ * @arg @ref LL_EXTI_LINE_15
+ * @arg @ref LL_EXTI_LINE_16
+ * @arg @ref LL_EXTI_LINE_18
+ * @arg @ref LL_EXTI_LINE_19
+ * @arg @ref LL_EXTI_LINE_20
+ * @arg @ref LL_EXTI_LINE_21
+ * @arg @ref LL_EXTI_LINE_22
+ * @arg @ref LL_EXTI_LINE_29
+ * @arg @ref LL_EXTI_LINE_30
+ * @arg @ref LL_EXTI_LINE_31
+ * @note Please check each device line mapping for EXTI Line availability
+ * @retval @note This bit is set when the selected edge event arrives on the interrupt
+ */
+__STATIC_INLINE uint32_t LL_EXTI_ReadFlag_0_31(uint32_t ExtiLine)
+{
+ return (uint32_t)(READ_BIT(EXTI->PR, ExtiLine));
+}
+
+
+/**
+ * @brief Clear ExtLine Flags for Lines in range 0 to 31
+ * @note This bit is set when the selected edge event arrives on the interrupt
+ * line. This bit is cleared by writing a 1 to the bit.
+ * @rmtoll PR PIFx LL_EXTI_ClearFlag_0_31
+ * @param ExtiLine This parameter can be a combination of the following values:
+ * @arg @ref LL_EXTI_LINE_0
+ * @arg @ref LL_EXTI_LINE_1
+ * @arg @ref LL_EXTI_LINE_2
+ * @arg @ref LL_EXTI_LINE_3
+ * @arg @ref LL_EXTI_LINE_4
+ * @arg @ref LL_EXTI_LINE_5
+ * @arg @ref LL_EXTI_LINE_6
+ * @arg @ref LL_EXTI_LINE_7
+ * @arg @ref LL_EXTI_LINE_8
+ * @arg @ref LL_EXTI_LINE_9
+ * @arg @ref LL_EXTI_LINE_10
+ * @arg @ref LL_EXTI_LINE_11
+ * @arg @ref LL_EXTI_LINE_12
+ * @arg @ref LL_EXTI_LINE_13
+ * @arg @ref LL_EXTI_LINE_14
+ * @arg @ref LL_EXTI_LINE_15
+ * @arg @ref LL_EXTI_LINE_16
+ * @arg @ref LL_EXTI_LINE_18
+ * @arg @ref LL_EXTI_LINE_19
+ * @arg @ref LL_EXTI_LINE_20
+ * @arg @ref LL_EXTI_LINE_21
+ * @arg @ref LL_EXTI_LINE_22
+ * @arg @ref LL_EXTI_LINE_29
+ * @arg @ref LL_EXTI_LINE_30
+ * @arg @ref LL_EXTI_LINE_31
+ * @note Please check each device line mapping for EXTI Line availability
+ * @retval None
+ */
+__STATIC_INLINE void LL_EXTI_ClearFlag_0_31(uint32_t ExtiLine)
+{
+ WRITE_REG(EXTI->PR, ExtiLine);
+}
+
+
+/**
+ * @}
+ */
+
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup EXTI_LL_EF_Init Initialization and de-initialization functions
+ * @{
+ */
+
+uint32_t LL_EXTI_Init(LL_EXTI_InitTypeDef *EXTI_InitStruct);
+uint32_t LL_EXTI_DeInit(void);
+void LL_EXTI_StructInit(LL_EXTI_InitTypeDef *EXTI_InitStruct);
+
+
+/**
+ * @}
+ */
+#endif /* USE_FULL_LL_DRIVER */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* EXTI */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_LL_EXTI_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_gpio.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_gpio.h
new file mode 100644
index 0000000..73c2773
--- /dev/null
+++ b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_gpio.h
@@ -0,0 +1,939 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_ll_gpio.h
+ * @author MCD Application Team
+ * @brief Header file of GPIO LL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_LL_GPIO_H
+#define __STM32F0xx_LL_GPIO_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx.h"
+
+/** @addtogroup STM32F0xx_LL_Driver
+ * @{
+ */
+
+#if defined (GPIOA) || defined (GPIOB) || defined (GPIOC) || defined (GPIOD) || defined (GPIOE) || defined (GPIOF)
+
+/** @defgroup GPIO_LL GPIO
+ * @{
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup GPIO_LL_Private_Macros GPIO Private Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+#endif /*USE_FULL_LL_DRIVER*/
+
+/* Exported types ------------------------------------------------------------*/
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup GPIO_LL_ES_INIT GPIO Exported Init structures
+ * @{
+ */
+
+/**
+ * @brief LL GPIO Init Structure definition
+ */
+typedef struct
+{
+ uint32_t Pin; /*!< Specifies the GPIO pins to be configured.
+ This parameter can be any value of @ref GPIO_LL_EC_PIN */
+
+ uint32_t Mode; /*!< Specifies the operating mode for the selected pins.
+ This parameter can be a value of @ref GPIO_LL_EC_MODE.
+
+ GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinMode().*/
+
+ uint32_t Speed; /*!< Specifies the speed for the selected pins.
+ This parameter can be a value of @ref GPIO_LL_EC_SPEED.
+
+ GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinSpeed().*/
+
+ uint32_t OutputType; /*!< Specifies the operating output type for the selected pins.
+ This parameter can be a value of @ref GPIO_LL_EC_OUTPUT.
+
+ GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinOutputType().*/
+
+ uint32_t Pull; /*!< Specifies the operating Pull-up/Pull down for the selected pins.
+ This parameter can be a value of @ref GPIO_LL_EC_PULL.
+
+ GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinPull().*/
+
+ uint32_t Alternate; /*!< Specifies the Peripheral to be connected to the selected pins.
+ This parameter can be a value of @ref GPIO_LL_EC_AF.
+
+ GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetAFPin_0_7() and LL_GPIO_SetAFPin_8_15().*/
+} LL_GPIO_InitTypeDef;
+
+/**
+ * @}
+ */
+#endif /* USE_FULL_LL_DRIVER */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup GPIO_LL_Exported_Constants GPIO Exported Constants
+ * @{
+ */
+
+/** @defgroup GPIO_LL_EC_PIN PIN
+ * @{
+ */
+#define LL_GPIO_PIN_0 GPIO_BSRR_BS_0 /*!< Select pin 0 */
+#define LL_GPIO_PIN_1 GPIO_BSRR_BS_1 /*!< Select pin 1 */
+#define LL_GPIO_PIN_2 GPIO_BSRR_BS_2 /*!< Select pin 2 */
+#define LL_GPIO_PIN_3 GPIO_BSRR_BS_3 /*!< Select pin 3 */
+#define LL_GPIO_PIN_4 GPIO_BSRR_BS_4 /*!< Select pin 4 */
+#define LL_GPIO_PIN_5 GPIO_BSRR_BS_5 /*!< Select pin 5 */
+#define LL_GPIO_PIN_6 GPIO_BSRR_BS_6 /*!< Select pin 6 */
+#define LL_GPIO_PIN_7 GPIO_BSRR_BS_7 /*!< Select pin 7 */
+#define LL_GPIO_PIN_8 GPIO_BSRR_BS_8 /*!< Select pin 8 */
+#define LL_GPIO_PIN_9 GPIO_BSRR_BS_9 /*!< Select pin 9 */
+#define LL_GPIO_PIN_10 GPIO_BSRR_BS_10 /*!< Select pin 10 */
+#define LL_GPIO_PIN_11 GPIO_BSRR_BS_11 /*!< Select pin 11 */
+#define LL_GPIO_PIN_12 GPIO_BSRR_BS_12 /*!< Select pin 12 */
+#define LL_GPIO_PIN_13 GPIO_BSRR_BS_13 /*!< Select pin 13 */
+#define LL_GPIO_PIN_14 GPIO_BSRR_BS_14 /*!< Select pin 14 */
+#define LL_GPIO_PIN_15 GPIO_BSRR_BS_15 /*!< Select pin 15 */
+#define LL_GPIO_PIN_ALL (GPIO_BSRR_BS_0 | GPIO_BSRR_BS_1 | GPIO_BSRR_BS_2 | \
+ GPIO_BSRR_BS_3 | GPIO_BSRR_BS_4 | GPIO_BSRR_BS_5 | \
+ GPIO_BSRR_BS_6 | GPIO_BSRR_BS_7 | GPIO_BSRR_BS_8 | \
+ GPIO_BSRR_BS_9 | GPIO_BSRR_BS_10 | GPIO_BSRR_BS_11 | \
+ GPIO_BSRR_BS_12 | GPIO_BSRR_BS_13 | GPIO_BSRR_BS_14 | \
+ GPIO_BSRR_BS_15) /*!< Select all pins */
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_LL_EC_MODE Mode
+ * @{
+ */
+#define LL_GPIO_MODE_INPUT (0x00000000U) /*!< Select input mode */
+#define LL_GPIO_MODE_OUTPUT GPIO_MODER_MODER0_0 /*!< Select output mode */
+#define LL_GPIO_MODE_ALTERNATE GPIO_MODER_MODER0_1 /*!< Select alternate function mode */
+#define LL_GPIO_MODE_ANALOG GPIO_MODER_MODER0 /*!< Select analog mode */
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_LL_EC_OUTPUT Output Type
+ * @{
+ */
+#define LL_GPIO_OUTPUT_PUSHPULL (0x00000000U) /*!< Select push-pull as output type */
+#define LL_GPIO_OUTPUT_OPENDRAIN GPIO_OTYPER_OT_0 /*!< Select open-drain as output type */
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_LL_EC_SPEED Output Speed
+ * @{
+ */
+#define LL_GPIO_SPEED_FREQ_LOW (0x00000000U) /*!< Select I/O low output speed */
+#define LL_GPIO_SPEED_FREQ_MEDIUM GPIO_OSPEEDR_OSPEEDR0_0 /*!< Select I/O medium output speed */
+#define LL_GPIO_SPEED_FREQ_HIGH GPIO_OSPEEDR_OSPEEDR0 /*!< Select I/O high output speed */
+/**
+ * @}
+ */
+#define LL_GPIO_SPEED_LOW LL_GPIO_SPEED_FREQ_LOW
+#define LL_GPIO_SPEED_MEDIUM LL_GPIO_SPEED_FREQ_MEDIUM
+#define LL_GPIO_SPEED_HIGH LL_GPIO_SPEED_FREQ_HIGH
+
+/** @defgroup GPIO_LL_EC_PULL Pull Up Pull Down
+ * @{
+ */
+#define LL_GPIO_PULL_NO (0x00000000U) /*!< Select I/O no pull */
+#define LL_GPIO_PULL_UP GPIO_PUPDR_PUPDR0_0 /*!< Select I/O pull up */
+#define LL_GPIO_PULL_DOWN GPIO_PUPDR_PUPDR0_1 /*!< Select I/O pull down */
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_LL_EC_AF Alternate Function
+ * @{
+ */
+#define LL_GPIO_AF_0 (0x0000000U) /*!< Select alternate function 0 */
+#define LL_GPIO_AF_1 (0x0000001U) /*!< Select alternate function 1 */
+#define LL_GPIO_AF_2 (0x0000002U) /*!< Select alternate function 2 */
+#define LL_GPIO_AF_3 (0x0000003U) /*!< Select alternate function 3 */
+#define LL_GPIO_AF_4 (0x0000004U) /*!< Select alternate function 4 */
+#define LL_GPIO_AF_5 (0x0000005U) /*!< Select alternate function 5 */
+#define LL_GPIO_AF_6 (0x0000006U) /*!< Select alternate function 6 */
+#define LL_GPIO_AF_7 (0x0000007U) /*!< Select alternate function 7 */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup GPIO_LL_Exported_Macros GPIO Exported Macros
+ * @{
+ */
+
+/** @defgroup GPIO_LL_EM_WRITE_READ Common Write and read registers Macros
+ * @{
+ */
+
+/**
+ * @brief Write a value in GPIO register
+ * @param __INSTANCE__ GPIO Instance
+ * @param __REG__ Register to be written
+ * @param __VALUE__ Value to be written in the register
+ * @retval None
+ */
+#define LL_GPIO_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__))
+
+/**
+ * @brief Read a value in GPIO register
+ * @param __INSTANCE__ GPIO Instance
+ * @param __REG__ Register to be read
+ * @retval Register value
+ */
+#define LL_GPIO_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup GPIO_LL_Exported_Functions GPIO Exported Functions
+ * @{
+ */
+
+/** @defgroup GPIO_LL_EF_Port_Configuration Port Configuration
+ * @{
+ */
+
+/**
+ * @brief Configure gpio mode for a dedicated pin on dedicated port.
+ * @note I/O mode can be Input mode, General purpose output, Alternate function mode or Analog.
+ * @note Warning: only one pin can be passed as parameter.
+ * @rmtoll MODER MODEy LL_GPIO_SetPinMode
+ * @param GPIOx GPIO Port
+ * @param Pin This parameter can be one of the following values:
+ * @arg @ref LL_GPIO_PIN_0
+ * @arg @ref LL_GPIO_PIN_1
+ * @arg @ref LL_GPIO_PIN_2
+ * @arg @ref LL_GPIO_PIN_3
+ * @arg @ref LL_GPIO_PIN_4
+ * @arg @ref LL_GPIO_PIN_5
+ * @arg @ref LL_GPIO_PIN_6
+ * @arg @ref LL_GPIO_PIN_7
+ * @arg @ref LL_GPIO_PIN_8
+ * @arg @ref LL_GPIO_PIN_9
+ * @arg @ref LL_GPIO_PIN_10
+ * @arg @ref LL_GPIO_PIN_11
+ * @arg @ref LL_GPIO_PIN_12
+ * @arg @ref LL_GPIO_PIN_13
+ * @arg @ref LL_GPIO_PIN_14
+ * @arg @ref LL_GPIO_PIN_15
+ * @param Mode This parameter can be one of the following values:
+ * @arg @ref LL_GPIO_MODE_INPUT
+ * @arg @ref LL_GPIO_MODE_OUTPUT
+ * @arg @ref LL_GPIO_MODE_ALTERNATE
+ * @arg @ref LL_GPIO_MODE_ANALOG
+ * @retval None
+ */
+__STATIC_INLINE void LL_GPIO_SetPinMode(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Mode)
+{
+ MODIFY_REG(GPIOx->MODER, ((Pin * Pin) * GPIO_MODER_MODER0), ((Pin * Pin) * Mode));
+}
+
+/**
+ * @brief Return gpio mode for a dedicated pin on dedicated port.
+ * @note I/O mode can be Input mode, General purpose output, Alternate function mode or Analog.
+ * @note Warning: only one pin can be passed as parameter.
+ * @rmtoll MODER MODEy LL_GPIO_GetPinMode
+ * @param GPIOx GPIO Port
+ * @param Pin This parameter can be one of the following values:
+ * @arg @ref LL_GPIO_PIN_0
+ * @arg @ref LL_GPIO_PIN_1
+ * @arg @ref LL_GPIO_PIN_2
+ * @arg @ref LL_GPIO_PIN_3
+ * @arg @ref LL_GPIO_PIN_4
+ * @arg @ref LL_GPIO_PIN_5
+ * @arg @ref LL_GPIO_PIN_6
+ * @arg @ref LL_GPIO_PIN_7
+ * @arg @ref LL_GPIO_PIN_8
+ * @arg @ref LL_GPIO_PIN_9
+ * @arg @ref LL_GPIO_PIN_10
+ * @arg @ref LL_GPIO_PIN_11
+ * @arg @ref LL_GPIO_PIN_12
+ * @arg @ref LL_GPIO_PIN_13
+ * @arg @ref LL_GPIO_PIN_14
+ * @arg @ref LL_GPIO_PIN_15
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_GPIO_MODE_INPUT
+ * @arg @ref LL_GPIO_MODE_OUTPUT
+ * @arg @ref LL_GPIO_MODE_ALTERNATE
+ * @arg @ref LL_GPIO_MODE_ANALOG
+ */
+__STATIC_INLINE uint32_t LL_GPIO_GetPinMode(GPIO_TypeDef *GPIOx, uint32_t Pin)
+{
+ return (uint32_t)(READ_BIT(GPIOx->MODER, ((Pin * Pin) * GPIO_MODER_MODER0)) / (Pin * Pin));
+}
+
+/**
+ * @brief Configure gpio output type for several pins on dedicated port.
+ * @note Output type as to be set when gpio pin is in output or
+ * alternate modes. Possible type are Push-pull or Open-drain.
+ * @rmtoll OTYPER OTy LL_GPIO_SetPinOutputType
+ * @param GPIOx GPIO Port
+ * @param PinMask This parameter can be a combination of the following values:
+ * @arg @ref LL_GPIO_PIN_0
+ * @arg @ref LL_GPIO_PIN_1
+ * @arg @ref LL_GPIO_PIN_2
+ * @arg @ref LL_GPIO_PIN_3
+ * @arg @ref LL_GPIO_PIN_4
+ * @arg @ref LL_GPIO_PIN_5
+ * @arg @ref LL_GPIO_PIN_6
+ * @arg @ref LL_GPIO_PIN_7
+ * @arg @ref LL_GPIO_PIN_8
+ * @arg @ref LL_GPIO_PIN_9
+ * @arg @ref LL_GPIO_PIN_10
+ * @arg @ref LL_GPIO_PIN_11
+ * @arg @ref LL_GPIO_PIN_12
+ * @arg @ref LL_GPIO_PIN_13
+ * @arg @ref LL_GPIO_PIN_14
+ * @arg @ref LL_GPIO_PIN_15
+ * @arg @ref LL_GPIO_PIN_ALL
+ * @param OutputType This parameter can be one of the following values:
+ * @arg @ref LL_GPIO_OUTPUT_PUSHPULL
+ * @arg @ref LL_GPIO_OUTPUT_OPENDRAIN
+ * @retval None
+ */
+__STATIC_INLINE void LL_GPIO_SetPinOutputType(GPIO_TypeDef *GPIOx, uint32_t PinMask, uint32_t OutputType)
+{
+ MODIFY_REG(GPIOx->OTYPER, PinMask, (PinMask * OutputType));
+}
+
+/**
+ * @brief Return gpio output type for several pins on dedicated port.
+ * @note Output type as to be set when gpio pin is in output or
+ * alternate modes. Possible type are Push-pull or Open-drain.
+ * @note Warning: only one pin can be passed as parameter.
+ * @rmtoll OTYPER OTy LL_GPIO_GetPinOutputType
+ * @param GPIOx GPIO Port
+ * @param Pin This parameter can be one of the following values:
+ * @arg @ref LL_GPIO_PIN_0
+ * @arg @ref LL_GPIO_PIN_1
+ * @arg @ref LL_GPIO_PIN_2
+ * @arg @ref LL_GPIO_PIN_3
+ * @arg @ref LL_GPIO_PIN_4
+ * @arg @ref LL_GPIO_PIN_5
+ * @arg @ref LL_GPIO_PIN_6
+ * @arg @ref LL_GPIO_PIN_7
+ * @arg @ref LL_GPIO_PIN_8
+ * @arg @ref LL_GPIO_PIN_9
+ * @arg @ref LL_GPIO_PIN_10
+ * @arg @ref LL_GPIO_PIN_11
+ * @arg @ref LL_GPIO_PIN_12
+ * @arg @ref LL_GPIO_PIN_13
+ * @arg @ref LL_GPIO_PIN_14
+ * @arg @ref LL_GPIO_PIN_15
+ * @arg @ref LL_GPIO_PIN_ALL
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_GPIO_OUTPUT_PUSHPULL
+ * @arg @ref LL_GPIO_OUTPUT_OPENDRAIN
+ */
+__STATIC_INLINE uint32_t LL_GPIO_GetPinOutputType(GPIO_TypeDef *GPIOx, uint32_t Pin)
+{
+ return (uint32_t)(READ_BIT(GPIOx->OTYPER, Pin) / Pin);
+}
+
+/**
+ * @brief Configure gpio speed for a dedicated pin on dedicated port.
+ * @note I/O speed can be Low, Medium, Fast or High speed.
+ * @note Warning: only one pin can be passed as parameter.
+ * @note Refer to datasheet for frequency specifications and the power
+ * supply and load conditions for each speed.
+ * @rmtoll OSPEEDR OSPEEDy LL_GPIO_SetPinSpeed
+ * @param GPIOx GPIO Port
+ * @param Pin This parameter can be one of the following values:
+ * @arg @ref LL_GPIO_PIN_0
+ * @arg @ref LL_GPIO_PIN_1
+ * @arg @ref LL_GPIO_PIN_2
+ * @arg @ref LL_GPIO_PIN_3
+ * @arg @ref LL_GPIO_PIN_4
+ * @arg @ref LL_GPIO_PIN_5
+ * @arg @ref LL_GPIO_PIN_6
+ * @arg @ref LL_GPIO_PIN_7
+ * @arg @ref LL_GPIO_PIN_8
+ * @arg @ref LL_GPIO_PIN_9
+ * @arg @ref LL_GPIO_PIN_10
+ * @arg @ref LL_GPIO_PIN_11
+ * @arg @ref LL_GPIO_PIN_12
+ * @arg @ref LL_GPIO_PIN_13
+ * @arg @ref LL_GPIO_PIN_14
+ * @arg @ref LL_GPIO_PIN_15
+ * @param Speed This parameter can be one of the following values:
+ * @arg @ref LL_GPIO_SPEED_FREQ_LOW
+ * @arg @ref LL_GPIO_SPEED_FREQ_MEDIUM
+ * @arg @ref LL_GPIO_SPEED_FREQ_HIGH
+ * @retval None
+ */
+__STATIC_INLINE void LL_GPIO_SetPinSpeed(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Speed)
+{
+ MODIFY_REG(GPIOx->OSPEEDR, ((Pin * Pin) * GPIO_OSPEEDR_OSPEEDR0), ((Pin * Pin) * Speed));
+}
+
+/**
+ * @brief Return gpio speed for a dedicated pin on dedicated port.
+ * @note I/O speed can be Low, Medium, Fast or High speed.
+ * @note Warning: only one pin can be passed as parameter.
+ * @note Refer to datasheet for frequency specifications and the power
+ * supply and load conditions for each speed.
+ * @rmtoll OSPEEDR OSPEEDy LL_GPIO_GetPinSpeed
+ * @param GPIOx GPIO Port
+ * @param Pin This parameter can be one of the following values:
+ * @arg @ref LL_GPIO_PIN_0
+ * @arg @ref LL_GPIO_PIN_1
+ * @arg @ref LL_GPIO_PIN_2
+ * @arg @ref LL_GPIO_PIN_3
+ * @arg @ref LL_GPIO_PIN_4
+ * @arg @ref LL_GPIO_PIN_5
+ * @arg @ref LL_GPIO_PIN_6
+ * @arg @ref LL_GPIO_PIN_7
+ * @arg @ref LL_GPIO_PIN_8
+ * @arg @ref LL_GPIO_PIN_9
+ * @arg @ref LL_GPIO_PIN_10
+ * @arg @ref LL_GPIO_PIN_11
+ * @arg @ref LL_GPIO_PIN_12
+ * @arg @ref LL_GPIO_PIN_13
+ * @arg @ref LL_GPIO_PIN_14
+ * @arg @ref LL_GPIO_PIN_15
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_GPIO_SPEED_FREQ_LOW
+ * @arg @ref LL_GPIO_SPEED_FREQ_MEDIUM
+ * @arg @ref LL_GPIO_SPEED_FREQ_HIGH
+ */
+__STATIC_INLINE uint32_t LL_GPIO_GetPinSpeed(GPIO_TypeDef *GPIOx, uint32_t Pin)
+{
+ return (uint32_t)(READ_BIT(GPIOx->OSPEEDR, ((Pin * Pin) * GPIO_OSPEEDR_OSPEEDR0)) / (Pin * Pin));
+}
+
+/**
+ * @brief Configure gpio pull-up or pull-down for a dedicated pin on a dedicated port.
+ * @note Warning: only one pin can be passed as parameter.
+ * @rmtoll PUPDR PUPDy LL_GPIO_SetPinPull
+ * @param GPIOx GPIO Port
+ * @param Pin This parameter can be one of the following values:
+ * @arg @ref LL_GPIO_PIN_0
+ * @arg @ref LL_GPIO_PIN_1
+ * @arg @ref LL_GPIO_PIN_2
+ * @arg @ref LL_GPIO_PIN_3
+ * @arg @ref LL_GPIO_PIN_4
+ * @arg @ref LL_GPIO_PIN_5
+ * @arg @ref LL_GPIO_PIN_6
+ * @arg @ref LL_GPIO_PIN_7
+ * @arg @ref LL_GPIO_PIN_8
+ * @arg @ref LL_GPIO_PIN_9
+ * @arg @ref LL_GPIO_PIN_10
+ * @arg @ref LL_GPIO_PIN_11
+ * @arg @ref LL_GPIO_PIN_12
+ * @arg @ref LL_GPIO_PIN_13
+ * @arg @ref LL_GPIO_PIN_14
+ * @arg @ref LL_GPIO_PIN_15
+ * @param Pull This parameter can be one of the following values:
+ * @arg @ref LL_GPIO_PULL_NO
+ * @arg @ref LL_GPIO_PULL_UP
+ * @arg @ref LL_GPIO_PULL_DOWN
+ * @retval None
+ */
+__STATIC_INLINE void LL_GPIO_SetPinPull(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Pull)
+{
+ MODIFY_REG(GPIOx->PUPDR, ((Pin * Pin) * GPIO_PUPDR_PUPDR0), ((Pin * Pin) * Pull));
+}
+
+/**
+ * @brief Return gpio pull-up or pull-down for a dedicated pin on a dedicated port
+ * @note Warning: only one pin can be passed as parameter.
+ * @rmtoll PUPDR PUPDy LL_GPIO_GetPinPull
+ * @param GPIOx GPIO Port
+ * @param Pin This parameter can be one of the following values:
+ * @arg @ref LL_GPIO_PIN_0
+ * @arg @ref LL_GPIO_PIN_1
+ * @arg @ref LL_GPIO_PIN_2
+ * @arg @ref LL_GPIO_PIN_3
+ * @arg @ref LL_GPIO_PIN_4
+ * @arg @ref LL_GPIO_PIN_5
+ * @arg @ref LL_GPIO_PIN_6
+ * @arg @ref LL_GPIO_PIN_7
+ * @arg @ref LL_GPIO_PIN_8
+ * @arg @ref LL_GPIO_PIN_9
+ * @arg @ref LL_GPIO_PIN_10
+ * @arg @ref LL_GPIO_PIN_11
+ * @arg @ref LL_GPIO_PIN_12
+ * @arg @ref LL_GPIO_PIN_13
+ * @arg @ref LL_GPIO_PIN_14
+ * @arg @ref LL_GPIO_PIN_15
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_GPIO_PULL_NO
+ * @arg @ref LL_GPIO_PULL_UP
+ * @arg @ref LL_GPIO_PULL_DOWN
+ */
+__STATIC_INLINE uint32_t LL_GPIO_GetPinPull(GPIO_TypeDef *GPIOx, uint32_t Pin)
+{
+ return (uint32_t)(READ_BIT(GPIOx->PUPDR, ((Pin * Pin) * GPIO_PUPDR_PUPDR0)) / (Pin * Pin));
+}
+
+/**
+ * @brief Configure gpio alternate function of a dedicated pin from 0 to 7 for a dedicated port.
+ * @note Possible values are from AF0 to AF7 depending on target.
+ * @note Warning: only one pin can be passed as parameter.
+ * @rmtoll AFRL AFSELy LL_GPIO_SetAFPin_0_7
+ * @param GPIOx GPIO Port
+ * @param Pin This parameter can be one of the following values:
+ * @arg @ref LL_GPIO_PIN_0
+ * @arg @ref LL_GPIO_PIN_1
+ * @arg @ref LL_GPIO_PIN_2
+ * @arg @ref LL_GPIO_PIN_3
+ * @arg @ref LL_GPIO_PIN_4
+ * @arg @ref LL_GPIO_PIN_5
+ * @arg @ref LL_GPIO_PIN_6
+ * @arg @ref LL_GPIO_PIN_7
+ * @param Alternate This parameter can be one of the following values:
+ * @arg @ref LL_GPIO_AF_0
+ * @arg @ref LL_GPIO_AF_1
+ * @arg @ref LL_GPIO_AF_2
+ * @arg @ref LL_GPIO_AF_3
+ * @arg @ref LL_GPIO_AF_4
+ * @arg @ref LL_GPIO_AF_5
+ * @arg @ref LL_GPIO_AF_6
+ * @arg @ref LL_GPIO_AF_7
+ * @retval None
+ */
+__STATIC_INLINE void LL_GPIO_SetAFPin_0_7(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Alternate)
+{
+ MODIFY_REG(GPIOx->AFR[0], ((((Pin * Pin) * Pin) * Pin) * GPIO_AFRL_AFSEL0),
+ ((((Pin * Pin) * Pin) * Pin) * Alternate));
+}
+
+/**
+ * @brief Return gpio alternate function of a dedicated pin from 0 to 7 for a dedicated port.
+ * @rmtoll AFRL AFSELy LL_GPIO_GetAFPin_0_7
+ * @param GPIOx GPIO Port
+ * @param Pin This parameter can be one of the following values:
+ * @arg @ref LL_GPIO_PIN_0
+ * @arg @ref LL_GPIO_PIN_1
+ * @arg @ref LL_GPIO_PIN_2
+ * @arg @ref LL_GPIO_PIN_3
+ * @arg @ref LL_GPIO_PIN_4
+ * @arg @ref LL_GPIO_PIN_5
+ * @arg @ref LL_GPIO_PIN_6
+ * @arg @ref LL_GPIO_PIN_7
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_GPIO_AF_0
+ * @arg @ref LL_GPIO_AF_1
+ * @arg @ref LL_GPIO_AF_2
+ * @arg @ref LL_GPIO_AF_3
+ * @arg @ref LL_GPIO_AF_4
+ * @arg @ref LL_GPIO_AF_5
+ * @arg @ref LL_GPIO_AF_6
+ * @arg @ref LL_GPIO_AF_7
+ */
+__STATIC_INLINE uint32_t LL_GPIO_GetAFPin_0_7(GPIO_TypeDef *GPIOx, uint32_t Pin)
+{
+ return (uint32_t)(READ_BIT(GPIOx->AFR[0],
+ ((((Pin * Pin) * Pin) * Pin) * GPIO_AFRL_AFSEL0)) / (((Pin * Pin) * Pin) * Pin));
+}
+
+/**
+ * @brief Configure gpio alternate function of a dedicated pin from 8 to 15 for a dedicated port.
+ * @note Possible values are from AF0 to AF7 depending on target.
+ * @note Warning: only one pin can be passed as parameter.
+ * @rmtoll AFRH AFSELy LL_GPIO_SetAFPin_8_15
+ * @param GPIOx GPIO Port
+ * @param Pin This parameter can be one of the following values:
+ * @arg @ref LL_GPIO_PIN_8
+ * @arg @ref LL_GPIO_PIN_9
+ * @arg @ref LL_GPIO_PIN_10
+ * @arg @ref LL_GPIO_PIN_11
+ * @arg @ref LL_GPIO_PIN_12
+ * @arg @ref LL_GPIO_PIN_13
+ * @arg @ref LL_GPIO_PIN_14
+ * @arg @ref LL_GPIO_PIN_15
+ * @param Alternate This parameter can be one of the following values:
+ * @arg @ref LL_GPIO_AF_0
+ * @arg @ref LL_GPIO_AF_1
+ * @arg @ref LL_GPIO_AF_2
+ * @arg @ref LL_GPIO_AF_3
+ * @arg @ref LL_GPIO_AF_4
+ * @arg @ref LL_GPIO_AF_5
+ * @arg @ref LL_GPIO_AF_6
+ * @arg @ref LL_GPIO_AF_7
+ * @retval None
+ */
+__STATIC_INLINE void LL_GPIO_SetAFPin_8_15(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Alternate)
+{
+ MODIFY_REG(GPIOx->AFR[1], (((((Pin >> 8U) * (Pin >> 8U)) * (Pin >> 8U)) * (Pin >> 8U)) * GPIO_AFRH_AFSEL8),
+ (((((Pin >> 8U) * (Pin >> 8U)) * (Pin >> 8U)) * (Pin >> 8U)) * Alternate));
+}
+
+/**
+ * @brief Return gpio alternate function of a dedicated pin from 8 to 15 for a dedicated port.
+ * @note Possible values are from AF0 to AF7 depending on target.
+ * @rmtoll AFRH AFSELy LL_GPIO_GetAFPin_8_15
+ * @param GPIOx GPIO Port
+ * @param Pin This parameter can be one of the following values:
+ * @arg @ref LL_GPIO_PIN_8
+ * @arg @ref LL_GPIO_PIN_9
+ * @arg @ref LL_GPIO_PIN_10
+ * @arg @ref LL_GPIO_PIN_11
+ * @arg @ref LL_GPIO_PIN_12
+ * @arg @ref LL_GPIO_PIN_13
+ * @arg @ref LL_GPIO_PIN_14
+ * @arg @ref LL_GPIO_PIN_15
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_GPIO_AF_0
+ * @arg @ref LL_GPIO_AF_1
+ * @arg @ref LL_GPIO_AF_2
+ * @arg @ref LL_GPIO_AF_3
+ * @arg @ref LL_GPIO_AF_4
+ * @arg @ref LL_GPIO_AF_5
+ * @arg @ref LL_GPIO_AF_6
+ * @arg @ref LL_GPIO_AF_7
+ */
+__STATIC_INLINE uint32_t LL_GPIO_GetAFPin_8_15(GPIO_TypeDef *GPIOx, uint32_t Pin)
+{
+ return (uint32_t)(READ_BIT(GPIOx->AFR[1],
+ (((((Pin >> 8U) * (Pin >> 8U)) * (Pin >> 8U)) * (Pin >> 8U)) * GPIO_AFRH_AFSEL8)) / ((((Pin >> 8U) *
+ (Pin >> 8U)) * (Pin >> 8U)) * (Pin >> 8U)));
+}
+
+
+/**
+ * @brief Lock configuration of several pins for a dedicated port.
+ * @note When the lock sequence has been applied on a port bit, the
+ * value of this port bit can no longer be modified until the
+ * next reset.
+ * @note Each lock bit freezes a specific configuration register
+ * (control and alternate function registers).
+ * @rmtoll LCKR LCKK LL_GPIO_LockPin
+ * @param GPIOx GPIO Port
+ * @param PinMask This parameter can be a combination of the following values:
+ * @arg @ref LL_GPIO_PIN_0
+ * @arg @ref LL_GPIO_PIN_1
+ * @arg @ref LL_GPIO_PIN_2
+ * @arg @ref LL_GPIO_PIN_3
+ * @arg @ref LL_GPIO_PIN_4
+ * @arg @ref LL_GPIO_PIN_5
+ * @arg @ref LL_GPIO_PIN_6
+ * @arg @ref LL_GPIO_PIN_7
+ * @arg @ref LL_GPIO_PIN_8
+ * @arg @ref LL_GPIO_PIN_9
+ * @arg @ref LL_GPIO_PIN_10
+ * @arg @ref LL_GPIO_PIN_11
+ * @arg @ref LL_GPIO_PIN_12
+ * @arg @ref LL_GPIO_PIN_13
+ * @arg @ref LL_GPIO_PIN_14
+ * @arg @ref LL_GPIO_PIN_15
+ * @arg @ref LL_GPIO_PIN_ALL
+ * @retval None
+ */
+__STATIC_INLINE void LL_GPIO_LockPin(GPIO_TypeDef *GPIOx, uint32_t PinMask)
+{
+ __IO uint32_t temp;
+ WRITE_REG(GPIOx->LCKR, GPIO_LCKR_LCKK | PinMask);
+ WRITE_REG(GPIOx->LCKR, PinMask);
+ WRITE_REG(GPIOx->LCKR, GPIO_LCKR_LCKK | PinMask);
+ temp = READ_REG(GPIOx->LCKR);
+ (void) temp;
+}
+
+/**
+ * @brief Return 1 if all pins passed as parameter, of a dedicated port, are locked. else Return 0.
+ * @rmtoll LCKR LCKy LL_GPIO_IsPinLocked
+ * @param GPIOx GPIO Port
+ * @param PinMask This parameter can be a combination of the following values:
+ * @arg @ref LL_GPIO_PIN_0
+ * @arg @ref LL_GPIO_PIN_1
+ * @arg @ref LL_GPIO_PIN_2
+ * @arg @ref LL_GPIO_PIN_3
+ * @arg @ref LL_GPIO_PIN_4
+ * @arg @ref LL_GPIO_PIN_5
+ * @arg @ref LL_GPIO_PIN_6
+ * @arg @ref LL_GPIO_PIN_7
+ * @arg @ref LL_GPIO_PIN_8
+ * @arg @ref LL_GPIO_PIN_9
+ * @arg @ref LL_GPIO_PIN_10
+ * @arg @ref LL_GPIO_PIN_11
+ * @arg @ref LL_GPIO_PIN_12
+ * @arg @ref LL_GPIO_PIN_13
+ * @arg @ref LL_GPIO_PIN_14
+ * @arg @ref LL_GPIO_PIN_15
+ * @arg @ref LL_GPIO_PIN_ALL
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_GPIO_IsPinLocked(GPIO_TypeDef *GPIOx, uint32_t PinMask)
+{
+ return (READ_BIT(GPIOx->LCKR, PinMask) == (PinMask));
+}
+
+/**
+ * @brief Return 1 if one of the pin of a dedicated port is locked. else return 0.
+ * @rmtoll LCKR LCKK LL_GPIO_IsAnyPinLocked
+ * @param GPIOx GPIO Port
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_GPIO_IsAnyPinLocked(GPIO_TypeDef *GPIOx)
+{
+ return (READ_BIT(GPIOx->LCKR, GPIO_LCKR_LCKK) == (GPIO_LCKR_LCKK));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_LL_EF_Data_Access Data Access
+ * @{
+ */
+
+/**
+ * @brief Return full input data register value for a dedicated port.
+ * @rmtoll IDR IDy LL_GPIO_ReadInputPort
+ * @param GPIOx GPIO Port
+ * @retval Input data register value of port
+ */
+__STATIC_INLINE uint32_t LL_GPIO_ReadInputPort(GPIO_TypeDef *GPIOx)
+{
+ return (uint32_t)(READ_REG(GPIOx->IDR));
+}
+
+/**
+ * @brief Return if input data level for several pins of dedicated port is high or low.
+ * @rmtoll IDR IDy LL_GPIO_IsInputPinSet
+ * @param GPIOx GPIO Port
+ * @param PinMask This parameter can be a combination of the following values:
+ * @arg @ref LL_GPIO_PIN_0
+ * @arg @ref LL_GPIO_PIN_1
+ * @arg @ref LL_GPIO_PIN_2
+ * @arg @ref LL_GPIO_PIN_3
+ * @arg @ref LL_GPIO_PIN_4
+ * @arg @ref LL_GPIO_PIN_5
+ * @arg @ref LL_GPIO_PIN_6
+ * @arg @ref LL_GPIO_PIN_7
+ * @arg @ref LL_GPIO_PIN_8
+ * @arg @ref LL_GPIO_PIN_9
+ * @arg @ref LL_GPIO_PIN_10
+ * @arg @ref LL_GPIO_PIN_11
+ * @arg @ref LL_GPIO_PIN_12
+ * @arg @ref LL_GPIO_PIN_13
+ * @arg @ref LL_GPIO_PIN_14
+ * @arg @ref LL_GPIO_PIN_15
+ * @arg @ref LL_GPIO_PIN_ALL
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_GPIO_IsInputPinSet(GPIO_TypeDef *GPIOx, uint32_t PinMask)
+{
+ return (READ_BIT(GPIOx->IDR, PinMask) == (PinMask));
+}
+
+/**
+ * @brief Write output data register for the port.
+ * @rmtoll ODR ODy LL_GPIO_WriteOutputPort
+ * @param GPIOx GPIO Port
+ * @param PortValue Level value for each pin of the port
+ * @retval None
+ */
+__STATIC_INLINE void LL_GPIO_WriteOutputPort(GPIO_TypeDef *GPIOx, uint32_t PortValue)
+{
+ WRITE_REG(GPIOx->ODR, PortValue);
+}
+
+/**
+ * @brief Return full output data register value for a dedicated port.
+ * @rmtoll ODR ODy LL_GPIO_ReadOutputPort
+ * @param GPIOx GPIO Port
+ * @retval Output data register value of port
+ */
+__STATIC_INLINE uint32_t LL_GPIO_ReadOutputPort(GPIO_TypeDef *GPIOx)
+{
+ return (uint32_t)(READ_REG(GPIOx->ODR));
+}
+
+/**
+ * @brief Return if input data level for several pins of dedicated port is high or low.
+ * @rmtoll ODR ODy LL_GPIO_IsOutputPinSet
+ * @param GPIOx GPIO Port
+ * @param PinMask This parameter can be a combination of the following values:
+ * @arg @ref LL_GPIO_PIN_0
+ * @arg @ref LL_GPIO_PIN_1
+ * @arg @ref LL_GPIO_PIN_2
+ * @arg @ref LL_GPIO_PIN_3
+ * @arg @ref LL_GPIO_PIN_4
+ * @arg @ref LL_GPIO_PIN_5
+ * @arg @ref LL_GPIO_PIN_6
+ * @arg @ref LL_GPIO_PIN_7
+ * @arg @ref LL_GPIO_PIN_8
+ * @arg @ref LL_GPIO_PIN_9
+ * @arg @ref LL_GPIO_PIN_10
+ * @arg @ref LL_GPIO_PIN_11
+ * @arg @ref LL_GPIO_PIN_12
+ * @arg @ref LL_GPIO_PIN_13
+ * @arg @ref LL_GPIO_PIN_14
+ * @arg @ref LL_GPIO_PIN_15
+ * @arg @ref LL_GPIO_PIN_ALL
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_GPIO_IsOutputPinSet(GPIO_TypeDef *GPIOx, uint32_t PinMask)
+{
+ return (READ_BIT(GPIOx->ODR, PinMask) == (PinMask));
+}
+
+/**
+ * @brief Set several pins to high level on dedicated gpio port.
+ * @rmtoll BSRR BSy LL_GPIO_SetOutputPin
+ * @param GPIOx GPIO Port
+ * @param PinMask This parameter can be a combination of the following values:
+ * @arg @ref LL_GPIO_PIN_0
+ * @arg @ref LL_GPIO_PIN_1
+ * @arg @ref LL_GPIO_PIN_2
+ * @arg @ref LL_GPIO_PIN_3
+ * @arg @ref LL_GPIO_PIN_4
+ * @arg @ref LL_GPIO_PIN_5
+ * @arg @ref LL_GPIO_PIN_6
+ * @arg @ref LL_GPIO_PIN_7
+ * @arg @ref LL_GPIO_PIN_8
+ * @arg @ref LL_GPIO_PIN_9
+ * @arg @ref LL_GPIO_PIN_10
+ * @arg @ref LL_GPIO_PIN_11
+ * @arg @ref LL_GPIO_PIN_12
+ * @arg @ref LL_GPIO_PIN_13
+ * @arg @ref LL_GPIO_PIN_14
+ * @arg @ref LL_GPIO_PIN_15
+ * @arg @ref LL_GPIO_PIN_ALL
+ * @retval None
+ */
+__STATIC_INLINE void LL_GPIO_SetOutputPin(GPIO_TypeDef *GPIOx, uint32_t PinMask)
+{
+ WRITE_REG(GPIOx->BSRR, PinMask);
+}
+
+/**
+ * @brief Set several pins to low level on dedicated gpio port.
+ * @rmtoll BRR BRy LL_GPIO_ResetOutputPin
+ * @param GPIOx GPIO Port
+ * @param PinMask This parameter can be a combination of the following values:
+ * @arg @ref LL_GPIO_PIN_0
+ * @arg @ref LL_GPIO_PIN_1
+ * @arg @ref LL_GPIO_PIN_2
+ * @arg @ref LL_GPIO_PIN_3
+ * @arg @ref LL_GPIO_PIN_4
+ * @arg @ref LL_GPIO_PIN_5
+ * @arg @ref LL_GPIO_PIN_6
+ * @arg @ref LL_GPIO_PIN_7
+ * @arg @ref LL_GPIO_PIN_8
+ * @arg @ref LL_GPIO_PIN_9
+ * @arg @ref LL_GPIO_PIN_10
+ * @arg @ref LL_GPIO_PIN_11
+ * @arg @ref LL_GPIO_PIN_12
+ * @arg @ref LL_GPIO_PIN_13
+ * @arg @ref LL_GPIO_PIN_14
+ * @arg @ref LL_GPIO_PIN_15
+ * @arg @ref LL_GPIO_PIN_ALL
+ * @retval None
+ */
+__STATIC_INLINE void LL_GPIO_ResetOutputPin(GPIO_TypeDef *GPIOx, uint32_t PinMask)
+{
+ WRITE_REG(GPIOx->BRR, PinMask);
+}
+
+/**
+ * @brief Toggle data value for several pin of dedicated port.
+ * @rmtoll ODR ODy LL_GPIO_TogglePin
+ * @param GPIOx GPIO Port
+ * @param PinMask This parameter can be a combination of the following values:
+ * @arg @ref LL_GPIO_PIN_0
+ * @arg @ref LL_GPIO_PIN_1
+ * @arg @ref LL_GPIO_PIN_2
+ * @arg @ref LL_GPIO_PIN_3
+ * @arg @ref LL_GPIO_PIN_4
+ * @arg @ref LL_GPIO_PIN_5
+ * @arg @ref LL_GPIO_PIN_6
+ * @arg @ref LL_GPIO_PIN_7
+ * @arg @ref LL_GPIO_PIN_8
+ * @arg @ref LL_GPIO_PIN_9
+ * @arg @ref LL_GPIO_PIN_10
+ * @arg @ref LL_GPIO_PIN_11
+ * @arg @ref LL_GPIO_PIN_12
+ * @arg @ref LL_GPIO_PIN_13
+ * @arg @ref LL_GPIO_PIN_14
+ * @arg @ref LL_GPIO_PIN_15
+ * @arg @ref LL_GPIO_PIN_ALL
+ * @retval None
+ */
+__STATIC_INLINE void LL_GPIO_TogglePin(GPIO_TypeDef *GPIOx, uint32_t PinMask)
+{
+ WRITE_REG(GPIOx->ODR, READ_REG(GPIOx->ODR) ^ PinMask);
+}
+
+/**
+ * @}
+ */
+
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup GPIO_LL_EF_Init Initialization and de-initialization functions
+ * @{
+ */
+
+ErrorStatus LL_GPIO_DeInit(GPIO_TypeDef *GPIOx);
+ErrorStatus LL_GPIO_Init(GPIO_TypeDef *GPIOx, LL_GPIO_InitTypeDef *GPIO_InitStruct);
+void LL_GPIO_StructInit(LL_GPIO_InitTypeDef *GPIO_InitStruct);
+
+/**
+ * @}
+ */
+#endif /* USE_FULL_LL_DRIVER */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* defined (GPIOA) || defined (GPIOB) || defined (GPIOC) || defined (GPIOD) || defined (GPIOE) || defined (GPIOF) */
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_LL_GPIO_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_i2c.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_i2c.h
new file mode 100644
index 0000000..76956ce
--- /dev/null
+++ b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_i2c.h
@@ -0,0 +1,2230 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_ll_i2c.h
+ * @author MCD Application Team
+ * @brief Header file of I2C LL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32F0xx_LL_I2C_H
+#define STM32F0xx_LL_I2C_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx.h"
+
+/** @addtogroup STM32F0xx_LL_Driver
+ * @{
+ */
+
+#if defined (I2C1) || defined (I2C2)
+
+/** @defgroup I2C_LL I2C
+ * @{
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup I2C_LL_Private_Constants I2C Private Constants
+ * @{
+ */
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup I2C_LL_Private_Macros I2C Private Macros
+ * @{
+ */
+/**
+ * @}
+ */
+#endif /*USE_FULL_LL_DRIVER*/
+
+/* Exported types ------------------------------------------------------------*/
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup I2C_LL_ES_INIT I2C Exported Init structure
+ * @{
+ */
+typedef struct
+{
+ uint32_t PeripheralMode; /*!< Specifies the peripheral mode.
+ This parameter can be a value of @ref I2C_LL_EC_PERIPHERAL_MODE
+
+ This feature can be modified afterwards using unitary function @ref LL_I2C_SetMode(). */
+
+ uint32_t Timing; /*!< Specifies the SDA setup, hold time and the SCL high, low period values.
+ This parameter must be set by referring to the STM32CubeMX Tool and
+ the helper macro @ref __LL_I2C_CONVERT_TIMINGS()
+
+ This feature can be modified afterwards using unitary function @ref LL_I2C_SetTiming(). */
+
+ uint32_t AnalogFilter; /*!< Enables or disables analog noise filter.
+ This parameter can be a value of @ref I2C_LL_EC_ANALOGFILTER_SELECTION
+
+ This feature can be modified afterwards using unitary functions @ref LL_I2C_EnableAnalogFilter() or LL_I2C_DisableAnalogFilter(). */
+
+ uint32_t DigitalFilter; /*!< Configures the digital noise filter.
+ This parameter can be a number between Min_Data = 0x00 and Max_Data = 0x0F
+
+ This feature can be modified afterwards using unitary function @ref LL_I2C_SetDigitalFilter(). */
+
+ uint32_t OwnAddress1; /*!< Specifies the device own address 1.
+ This parameter must be a value between Min_Data = 0x00 and Max_Data = 0x3FF
+
+ This feature can be modified afterwards using unitary function @ref LL_I2C_SetOwnAddress1(). */
+
+ uint32_t TypeAcknowledge; /*!< Specifies the ACKnowledge or Non ACKnowledge condition after the address receive match code or next received byte.
+ This parameter can be a value of @ref I2C_LL_EC_I2C_ACKNOWLEDGE
+
+ This feature can be modified afterwards using unitary function @ref LL_I2C_AcknowledgeNextData(). */
+
+ uint32_t OwnAddrSize; /*!< Specifies the device own address 1 size (7-bit or 10-bit).
+ This parameter can be a value of @ref I2C_LL_EC_OWNADDRESS1
+
+ This feature can be modified afterwards using unitary function @ref LL_I2C_SetOwnAddress1(). */
+} LL_I2C_InitTypeDef;
+/**
+ * @}
+ */
+#endif /*USE_FULL_LL_DRIVER*/
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup I2C_LL_Exported_Constants I2C Exported Constants
+ * @{
+ */
+
+/** @defgroup I2C_LL_EC_CLEAR_FLAG Clear Flags Defines
+ * @brief Flags defines which can be used with LL_I2C_WriteReg function
+ * @{
+ */
+#define LL_I2C_ICR_ADDRCF I2C_ICR_ADDRCF /*!< Address Matched flag */
+#define LL_I2C_ICR_NACKCF I2C_ICR_NACKCF /*!< Not Acknowledge flag */
+#define LL_I2C_ICR_STOPCF I2C_ICR_STOPCF /*!< Stop detection flag */
+#define LL_I2C_ICR_BERRCF I2C_ICR_BERRCF /*!< Bus error flag */
+#define LL_I2C_ICR_ARLOCF I2C_ICR_ARLOCF /*!< Arbitration Lost flag */
+#define LL_I2C_ICR_OVRCF I2C_ICR_OVRCF /*!< Overrun/Underrun flag */
+#define LL_I2C_ICR_PECCF I2C_ICR_PECCF /*!< PEC error flag */
+#define LL_I2C_ICR_TIMOUTCF I2C_ICR_TIMOUTCF /*!< Timeout detection flag */
+#define LL_I2C_ICR_ALERTCF I2C_ICR_ALERTCF /*!< Alert flag */
+/**
+ * @}
+ */
+
+/** @defgroup I2C_LL_EC_GET_FLAG Get Flags Defines
+ * @brief Flags defines which can be used with LL_I2C_ReadReg function
+ * @{
+ */
+#define LL_I2C_ISR_TXE I2C_ISR_TXE /*!< Transmit data register empty */
+#define LL_I2C_ISR_TXIS I2C_ISR_TXIS /*!< Transmit interrupt status */
+#define LL_I2C_ISR_RXNE I2C_ISR_RXNE /*!< Receive data register not empty */
+#define LL_I2C_ISR_ADDR I2C_ISR_ADDR /*!< Address matched (slave mode) */
+#define LL_I2C_ISR_NACKF I2C_ISR_NACKF /*!< Not Acknowledge received flag */
+#define LL_I2C_ISR_STOPF I2C_ISR_STOPF /*!< Stop detection flag */
+#define LL_I2C_ISR_TC I2C_ISR_TC /*!< Transfer Complete (master mode) */
+#define LL_I2C_ISR_TCR I2C_ISR_TCR /*!< Transfer Complete Reload */
+#define LL_I2C_ISR_BERR I2C_ISR_BERR /*!< Bus error */
+#define LL_I2C_ISR_ARLO I2C_ISR_ARLO /*!< Arbitration lost */
+#define LL_I2C_ISR_OVR I2C_ISR_OVR /*!< Overrun/Underrun (slave mode) */
+#define LL_I2C_ISR_PECERR I2C_ISR_PECERR /*!< PEC Error in reception (SMBus mode) */
+#define LL_I2C_ISR_TIMEOUT I2C_ISR_TIMEOUT /*!< Timeout detection flag (SMBus mode) */
+#define LL_I2C_ISR_ALERT I2C_ISR_ALERT /*!< SMBus alert (SMBus mode) */
+#define LL_I2C_ISR_BUSY I2C_ISR_BUSY /*!< Bus busy */
+/**
+ * @}
+ */
+
+/** @defgroup I2C_LL_EC_IT IT Defines
+ * @brief IT defines which can be used with LL_I2C_ReadReg and LL_I2C_WriteReg functions
+ * @{
+ */
+#define LL_I2C_CR1_TXIE I2C_CR1_TXIE /*!< TX Interrupt enable */
+#define LL_I2C_CR1_RXIE I2C_CR1_RXIE /*!< RX Interrupt enable */
+#define LL_I2C_CR1_ADDRIE I2C_CR1_ADDRIE /*!< Address match Interrupt enable (slave only) */
+#define LL_I2C_CR1_NACKIE I2C_CR1_NACKIE /*!< Not acknowledge received Interrupt enable */
+#define LL_I2C_CR1_STOPIE I2C_CR1_STOPIE /*!< STOP detection Interrupt enable */
+#define LL_I2C_CR1_TCIE I2C_CR1_TCIE /*!< Transfer Complete interrupt enable */
+#define LL_I2C_CR1_ERRIE I2C_CR1_ERRIE /*!< Error interrupts enable */
+/**
+ * @}
+ */
+
+/** @defgroup I2C_LL_EC_PERIPHERAL_MODE Peripheral Mode
+ * @{
+ */
+#define LL_I2C_MODE_I2C 0x00000000U /*!< I2C Master or Slave mode */
+#define LL_I2C_MODE_SMBUS_HOST I2C_CR1_SMBHEN /*!< SMBus Host address acknowledge */
+#define LL_I2C_MODE_SMBUS_DEVICE 0x00000000U /*!< SMBus Device default mode (Default address not acknowledge) */
+#define LL_I2C_MODE_SMBUS_DEVICE_ARP I2C_CR1_SMBDEN /*!< SMBus Device Default address acknowledge */
+/**
+ * @}
+ */
+
+/** @defgroup I2C_LL_EC_ANALOGFILTER_SELECTION Analog Filter Selection
+ * @{
+ */
+#define LL_I2C_ANALOGFILTER_ENABLE 0x00000000U /*!< Analog filter is enabled. */
+#define LL_I2C_ANALOGFILTER_DISABLE I2C_CR1_ANFOFF /*!< Analog filter is disabled. */
+/**
+ * @}
+ */
+
+/** @defgroup I2C_LL_EC_ADDRESSING_MODE Master Addressing Mode
+ * @{
+ */
+#define LL_I2C_ADDRESSING_MODE_7BIT 0x00000000U /*!< Master operates in 7-bit addressing mode. */
+#define LL_I2C_ADDRESSING_MODE_10BIT I2C_CR2_ADD10 /*!< Master operates in 10-bit addressing mode.*/
+/**
+ * @}
+ */
+
+/** @defgroup I2C_LL_EC_OWNADDRESS1 Own Address 1 Length
+ * @{
+ */
+#define LL_I2C_OWNADDRESS1_7BIT 0x00000000U /*!< Own address 1 is a 7-bit address. */
+#define LL_I2C_OWNADDRESS1_10BIT I2C_OAR1_OA1MODE /*!< Own address 1 is a 10-bit address.*/
+/**
+ * @}
+ */
+
+/** @defgroup I2C_LL_EC_OWNADDRESS2 Own Address 2 Masks
+ * @{
+ */
+#define LL_I2C_OWNADDRESS2_NOMASK I2C_OAR2_OA2NOMASK /*!< Own Address2 No mask. */
+#define LL_I2C_OWNADDRESS2_MASK01 I2C_OAR2_OA2MASK01 /*!< Only Address2 bits[7:2] are compared. */
+#define LL_I2C_OWNADDRESS2_MASK02 I2C_OAR2_OA2MASK02 /*!< Only Address2 bits[7:3] are compared. */
+#define LL_I2C_OWNADDRESS2_MASK03 I2C_OAR2_OA2MASK03 /*!< Only Address2 bits[7:4] are compared. */
+#define LL_I2C_OWNADDRESS2_MASK04 I2C_OAR2_OA2MASK04 /*!< Only Address2 bits[7:5] are compared. */
+#define LL_I2C_OWNADDRESS2_MASK05 I2C_OAR2_OA2MASK05 /*!< Only Address2 bits[7:6] are compared. */
+#define LL_I2C_OWNADDRESS2_MASK06 I2C_OAR2_OA2MASK06 /*!< Only Address2 bits[7] are compared. */
+#define LL_I2C_OWNADDRESS2_MASK07 I2C_OAR2_OA2MASK07 /*!< No comparison is done. All Address2 are acknowledged.*/
+/**
+ * @}
+ */
+
+/** @defgroup I2C_LL_EC_I2C_ACKNOWLEDGE Acknowledge Generation
+ * @{
+ */
+#define LL_I2C_ACK 0x00000000U /*!< ACK is sent after current received byte. */
+#define LL_I2C_NACK I2C_CR2_NACK /*!< NACK is sent after current received byte.*/
+/**
+ * @}
+ */
+
+/** @defgroup I2C_LL_EC_ADDRSLAVE Slave Address Length
+ * @{
+ */
+#define LL_I2C_ADDRSLAVE_7BIT 0x00000000U /*!< Slave Address in 7-bit. */
+#define LL_I2C_ADDRSLAVE_10BIT I2C_CR2_ADD10 /*!< Slave Address in 10-bit.*/
+/**
+ * @}
+ */
+
+/** @defgroup I2C_LL_EC_REQUEST Transfer Request Direction
+ * @{
+ */
+#define LL_I2C_REQUEST_WRITE 0x00000000U /*!< Master request a write transfer. */
+#define LL_I2C_REQUEST_READ I2C_CR2_RD_WRN /*!< Master request a read transfer. */
+/**
+ * @}
+ */
+
+/** @defgroup I2C_LL_EC_MODE Transfer End Mode
+ * @{
+ */
+#define LL_I2C_MODE_RELOAD I2C_CR2_RELOAD /*!< Enable I2C Reload mode. */
+#define LL_I2C_MODE_AUTOEND I2C_CR2_AUTOEND /*!< Enable I2C Automatic end mode with no HW PEC comparison. */
+#define LL_I2C_MODE_SOFTEND 0x00000000U /*!< Enable I2C Software end mode with no HW PEC comparison. */
+#define LL_I2C_MODE_SMBUS_RELOAD LL_I2C_MODE_RELOAD /*!< Enable SMBUS Automatic end mode with HW PEC comparison. */
+#define LL_I2C_MODE_SMBUS_AUTOEND_NO_PEC LL_I2C_MODE_AUTOEND /*!< Enable SMBUS Automatic end mode with HW PEC comparison. */
+#define LL_I2C_MODE_SMBUS_SOFTEND_NO_PEC LL_I2C_MODE_SOFTEND /*!< Enable SMBUS Software end mode with HW PEC comparison. */
+#define LL_I2C_MODE_SMBUS_AUTOEND_WITH_PEC (uint32_t)(LL_I2C_MODE_AUTOEND | I2C_CR2_PECBYTE) /*!< Enable SMBUS Automatic end mode with HW PEC comparison. */
+#define LL_I2C_MODE_SMBUS_SOFTEND_WITH_PEC (uint32_t)(LL_I2C_MODE_SOFTEND | I2C_CR2_PECBYTE) /*!< Enable SMBUS Software end mode with HW PEC comparison. */
+/**
+ * @}
+ */
+
+/** @defgroup I2C_LL_EC_GENERATE Start And Stop Generation
+ * @{
+ */
+#define LL_I2C_GENERATE_NOSTARTSTOP 0x00000000U /*!< Don't Generate Stop and Start condition. */
+#define LL_I2C_GENERATE_STOP (uint32_t)(0x80000000U | I2C_CR2_STOP) /*!< Generate Stop condition (Size should be set to 0). */
+#define LL_I2C_GENERATE_START_READ (uint32_t)(0x80000000U | I2C_CR2_START | I2C_CR2_RD_WRN) /*!< Generate Start for read request. */
+#define LL_I2C_GENERATE_START_WRITE (uint32_t)(0x80000000U | I2C_CR2_START) /*!< Generate Start for write request. */
+#define LL_I2C_GENERATE_RESTART_7BIT_READ (uint32_t)(0x80000000U | I2C_CR2_START | I2C_CR2_RD_WRN) /*!< Generate Restart for read request, slave 7Bit address. */
+#define LL_I2C_GENERATE_RESTART_7BIT_WRITE (uint32_t)(0x80000000U | I2C_CR2_START) /*!< Generate Restart for write request, slave 7Bit address. */
+#define LL_I2C_GENERATE_RESTART_10BIT_READ (uint32_t)(0x80000000U | I2C_CR2_START | I2C_CR2_RD_WRN | I2C_CR2_HEAD10R) /*!< Generate Restart for read request, slave 10Bit address. */
+#define LL_I2C_GENERATE_RESTART_10BIT_WRITE (uint32_t)(0x80000000U | I2C_CR2_START) /*!< Generate Restart for write request, slave 10Bit address.*/
+/**
+ * @}
+ */
+
+/** @defgroup I2C_LL_EC_DIRECTION Read Write Direction
+ * @{
+ */
+#define LL_I2C_DIRECTION_WRITE 0x00000000U /*!< Write transfer request by master, slave enters receiver mode. */
+#define LL_I2C_DIRECTION_READ I2C_ISR_DIR /*!< Read transfer request by master, slave enters transmitter mode.*/
+/**
+ * @}
+ */
+
+/** @defgroup I2C_LL_EC_DMA_REG_DATA DMA Register Data
+ * @{
+ */
+#define LL_I2C_DMA_REG_DATA_TRANSMIT 0x00000000U /*!< Get address of data register used for transmission */
+#define LL_I2C_DMA_REG_DATA_RECEIVE 0x00000001U /*!< Get address of data register used for reception */
+/**
+ * @}
+ */
+
+/** @defgroup I2C_LL_EC_SMBUS_TIMEOUTA_MODE SMBus TimeoutA Mode SCL SDA Timeout
+ * @{
+ */
+#define LL_I2C_SMBUS_TIMEOUTA_MODE_SCL_LOW 0x00000000U /*!< TimeoutA is used to detect SCL low level timeout. */
+#define LL_I2C_SMBUS_TIMEOUTA_MODE_SDA_SCL_HIGH I2C_TIMEOUTR_TIDLE /*!< TimeoutA is used to detect both SCL and SDA high level timeout.*/
+/**
+ * @}
+ */
+
+/** @defgroup I2C_LL_EC_SMBUS_TIMEOUT_SELECTION SMBus Timeout Selection
+ * @{
+ */
+#define LL_I2C_SMBUS_TIMEOUTA I2C_TIMEOUTR_TIMOUTEN /*!< TimeoutA enable bit */
+#define LL_I2C_SMBUS_TIMEOUTB I2C_TIMEOUTR_TEXTEN /*!< TimeoutB (extended clock) enable bit */
+#define LL_I2C_SMBUS_ALL_TIMEOUT (uint32_t)(I2C_TIMEOUTR_TIMOUTEN | I2C_TIMEOUTR_TEXTEN) /*!< TimeoutA and TimeoutB (extended clock) enable bits */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup I2C_LL_Exported_Macros I2C Exported Macros
+ * @{
+ */
+
+/** @defgroup I2C_LL_EM_WRITE_READ Common Write and read registers Macros
+ * @{
+ */
+
+/**
+ * @brief Write a value in I2C register
+ * @param __INSTANCE__ I2C Instance
+ * @param __REG__ Register to be written
+ * @param __VALUE__ Value to be written in the register
+ * @retval None
+ */
+#define LL_I2C_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__))
+
+/**
+ * @brief Read a value in I2C register
+ * @param __INSTANCE__ I2C Instance
+ * @param __REG__ Register to be read
+ * @retval Register value
+ */
+#define LL_I2C_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__)
+/**
+ * @}
+ */
+
+/** @defgroup I2C_LL_EM_CONVERT_TIMINGS Convert SDA SCL timings
+ * @{
+ */
+/**
+ * @brief Configure the SDA setup, hold time and the SCL high, low period.
+ * @param __PRESCALER__ This parameter must be a value between Min_Data=0 and Max_Data=0xF.
+ * @param __DATA_SETUP_TIME__ This parameter must be a value between Min_Data=0 and Max_Data=0xF. (tscldel = (SCLDEL+1)xtpresc)
+ * @param __DATA_HOLD_TIME__ This parameter must be a value between Min_Data=0 and Max_Data=0xF. (tsdadel = SDADELxtpresc)
+ * @param __CLOCK_HIGH_PERIOD__ This parameter must be a value between Min_Data=0 and Max_Data=0xFF. (tsclh = (SCLH+1)xtpresc)
+ * @param __CLOCK_LOW_PERIOD__ This parameter must be a value between Min_Data=0 and Max_Data=0xFF. (tscll = (SCLL+1)xtpresc)
+ * @retval Value between Min_Data=0 and Max_Data=0xFFFFFFFF
+ */
+#define __LL_I2C_CONVERT_TIMINGS(__PRESCALER__, __DATA_SETUP_TIME__, __DATA_HOLD_TIME__, __CLOCK_HIGH_PERIOD__, __CLOCK_LOW_PERIOD__) \
+ ((((uint32_t)(__PRESCALER__) << I2C_TIMINGR_PRESC_Pos) & I2C_TIMINGR_PRESC) | \
+ (((uint32_t)(__DATA_SETUP_TIME__) << I2C_TIMINGR_SCLDEL_Pos) & I2C_TIMINGR_SCLDEL) | \
+ (((uint32_t)(__DATA_HOLD_TIME__) << I2C_TIMINGR_SDADEL_Pos) & I2C_TIMINGR_SDADEL) | \
+ (((uint32_t)(__CLOCK_HIGH_PERIOD__) << I2C_TIMINGR_SCLH_Pos) & I2C_TIMINGR_SCLH) | \
+ (((uint32_t)(__CLOCK_LOW_PERIOD__) << I2C_TIMINGR_SCLL_Pos) & I2C_TIMINGR_SCLL))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup I2C_LL_Exported_Functions I2C Exported Functions
+ * @{
+ */
+
+/** @defgroup I2C_LL_EF_Configuration Configuration
+ * @{
+ */
+
+/**
+ * @brief Enable I2C peripheral (PE = 1).
+ * @rmtoll CR1 PE LL_I2C_Enable
+ * @param I2Cx I2C Instance.
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2C_Enable(I2C_TypeDef *I2Cx)
+{
+ SET_BIT(I2Cx->CR1, I2C_CR1_PE);
+}
+
+/**
+ * @brief Disable I2C peripheral (PE = 0).
+ * @note When PE = 0, the I2C SCL and SDA lines are released.
+ * Internal state machines and status bits are put back to their reset value.
+ * When cleared, PE must be kept low for at least 3 APB clock cycles.
+ * @rmtoll CR1 PE LL_I2C_Disable
+ * @param I2Cx I2C Instance.
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2C_Disable(I2C_TypeDef *I2Cx)
+{
+ CLEAR_BIT(I2Cx->CR1, I2C_CR1_PE);
+}
+
+/**
+ * @brief Check if the I2C peripheral is enabled or disabled.
+ * @rmtoll CR1 PE LL_I2C_IsEnabled
+ * @param I2Cx I2C Instance.
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_I2C_IsEnabled(I2C_TypeDef *I2Cx)
+{
+ return ((READ_BIT(I2Cx->CR1, I2C_CR1_PE) == (I2C_CR1_PE)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Configure Noise Filters (Analog and Digital).
+ * @note If the analog filter is also enabled, the digital filter is added to analog filter.
+ * The filters can only be programmed when the I2C is disabled (PE = 0).
+ * @rmtoll CR1 ANFOFF LL_I2C_ConfigFilters\n
+ * CR1 DNF LL_I2C_ConfigFilters
+ * @param I2Cx I2C Instance.
+ * @param AnalogFilter This parameter can be one of the following values:
+ * @arg @ref LL_I2C_ANALOGFILTER_ENABLE
+ * @arg @ref LL_I2C_ANALOGFILTER_DISABLE
+ * @param DigitalFilter This parameter must be a value between Min_Data=0x00 (Digital filter disabled) and Max_Data=0x0F (Digital filter enabled and filtering capability up to 15*ti2cclk).
+ * This parameter is used to configure the digital noise filter on SDA and SCL input.
+ * The digital filter will filter spikes with a length of up to DNF[3:0]*ti2cclk.
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2C_ConfigFilters(I2C_TypeDef *I2Cx, uint32_t AnalogFilter, uint32_t DigitalFilter)
+{
+ MODIFY_REG(I2Cx->CR1, I2C_CR1_ANFOFF | I2C_CR1_DNF, AnalogFilter | (DigitalFilter << I2C_CR1_DNF_Pos));
+}
+
+/**
+ * @brief Configure Digital Noise Filter.
+ * @note If the analog filter is also enabled, the digital filter is added to analog filter.
+ * This filter can only be programmed when the I2C is disabled (PE = 0).
+ * @rmtoll CR1 DNF LL_I2C_SetDigitalFilter
+ * @param I2Cx I2C Instance.
+ * @param DigitalFilter This parameter must be a value between Min_Data=0x00 (Digital filter disabled) and Max_Data=0x0F (Digital filter enabled and filtering capability up to 15*ti2cclk).
+ * This parameter is used to configure the digital noise filter on SDA and SCL input.
+ * The digital filter will filter spikes with a length of up to DNF[3:0]*ti2cclk.
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2C_SetDigitalFilter(I2C_TypeDef *I2Cx, uint32_t DigitalFilter)
+{
+ MODIFY_REG(I2Cx->CR1, I2C_CR1_DNF, DigitalFilter << I2C_CR1_DNF_Pos);
+}
+
+/**
+ * @brief Get the current Digital Noise Filter configuration.
+ * @rmtoll CR1 DNF LL_I2C_GetDigitalFilter
+ * @param I2Cx I2C Instance.
+ * @retval Value between Min_Data=0x0 and Max_Data=0xF
+ */
+__STATIC_INLINE uint32_t LL_I2C_GetDigitalFilter(I2C_TypeDef *I2Cx)
+{
+ return (uint32_t)(READ_BIT(I2Cx->CR1, I2C_CR1_DNF) >> I2C_CR1_DNF_Pos);
+}
+
+/**
+ * @brief Enable Analog Noise Filter.
+ * @note This filter can only be programmed when the I2C is disabled (PE = 0).
+ * @rmtoll CR1 ANFOFF LL_I2C_EnableAnalogFilter
+ * @param I2Cx I2C Instance.
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2C_EnableAnalogFilter(I2C_TypeDef *I2Cx)
+{
+ CLEAR_BIT(I2Cx->CR1, I2C_CR1_ANFOFF);
+}
+
+/**
+ * @brief Disable Analog Noise Filter.
+ * @note This filter can only be programmed when the I2C is disabled (PE = 0).
+ * @rmtoll CR1 ANFOFF LL_I2C_DisableAnalogFilter
+ * @param I2Cx I2C Instance.
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2C_DisableAnalogFilter(I2C_TypeDef *I2Cx)
+{
+ SET_BIT(I2Cx->CR1, I2C_CR1_ANFOFF);
+}
+
+/**
+ * @brief Check if Analog Noise Filter is enabled or disabled.
+ * @rmtoll CR1 ANFOFF LL_I2C_IsEnabledAnalogFilter
+ * @param I2Cx I2C Instance.
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_I2C_IsEnabledAnalogFilter(I2C_TypeDef *I2Cx)
+{
+ return ((READ_BIT(I2Cx->CR1, I2C_CR1_ANFOFF) != (I2C_CR1_ANFOFF)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Enable DMA transmission requests.
+ * @rmtoll CR1 TXDMAEN LL_I2C_EnableDMAReq_TX
+ * @param I2Cx I2C Instance.
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2C_EnableDMAReq_TX(I2C_TypeDef *I2Cx)
+{
+ SET_BIT(I2Cx->CR1, I2C_CR1_TXDMAEN);
+}
+
+/**
+ * @brief Disable DMA transmission requests.
+ * @rmtoll CR1 TXDMAEN LL_I2C_DisableDMAReq_TX
+ * @param I2Cx I2C Instance.
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2C_DisableDMAReq_TX(I2C_TypeDef *I2Cx)
+{
+ CLEAR_BIT(I2Cx->CR1, I2C_CR1_TXDMAEN);
+}
+
+/**
+ * @brief Check if DMA transmission requests are enabled or disabled.
+ * @rmtoll CR1 TXDMAEN LL_I2C_IsEnabledDMAReq_TX
+ * @param I2Cx I2C Instance.
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_I2C_IsEnabledDMAReq_TX(I2C_TypeDef *I2Cx)
+{
+ return ((READ_BIT(I2Cx->CR1, I2C_CR1_TXDMAEN) == (I2C_CR1_TXDMAEN)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Enable DMA reception requests.
+ * @rmtoll CR1 RXDMAEN LL_I2C_EnableDMAReq_RX
+ * @param I2Cx I2C Instance.
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2C_EnableDMAReq_RX(I2C_TypeDef *I2Cx)
+{
+ SET_BIT(I2Cx->CR1, I2C_CR1_RXDMAEN);
+}
+
+/**
+ * @brief Disable DMA reception requests.
+ * @rmtoll CR1 RXDMAEN LL_I2C_DisableDMAReq_RX
+ * @param I2Cx I2C Instance.
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2C_DisableDMAReq_RX(I2C_TypeDef *I2Cx)
+{
+ CLEAR_BIT(I2Cx->CR1, I2C_CR1_RXDMAEN);
+}
+
+/**
+ * @brief Check if DMA reception requests are enabled or disabled.
+ * @rmtoll CR1 RXDMAEN LL_I2C_IsEnabledDMAReq_RX
+ * @param I2Cx I2C Instance.
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_I2C_IsEnabledDMAReq_RX(I2C_TypeDef *I2Cx)
+{
+ return ((READ_BIT(I2Cx->CR1, I2C_CR1_RXDMAEN) == (I2C_CR1_RXDMAEN)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Get the data register address used for DMA transfer
+ * @rmtoll TXDR TXDATA LL_I2C_DMA_GetRegAddr\n
+ * RXDR RXDATA LL_I2C_DMA_GetRegAddr
+ * @param I2Cx I2C Instance
+ * @param Direction This parameter can be one of the following values:
+ * @arg @ref LL_I2C_DMA_REG_DATA_TRANSMIT
+ * @arg @ref LL_I2C_DMA_REG_DATA_RECEIVE
+ * @retval Address of data register
+ */
+__STATIC_INLINE uint32_t LL_I2C_DMA_GetRegAddr(I2C_TypeDef *I2Cx, uint32_t Direction)
+{
+ register uint32_t data_reg_addr;
+
+ if (Direction == LL_I2C_DMA_REG_DATA_TRANSMIT)
+ {
+ /* return address of TXDR register */
+ data_reg_addr = (uint32_t) & (I2Cx->TXDR);
+ }
+ else
+ {
+ /* return address of RXDR register */
+ data_reg_addr = (uint32_t) & (I2Cx->RXDR);
+ }
+
+ return data_reg_addr;
+}
+
+/**
+ * @brief Enable Clock stretching.
+ * @note This bit can only be programmed when the I2C is disabled (PE = 0).
+ * @rmtoll CR1 NOSTRETCH LL_I2C_EnableClockStretching
+ * @param I2Cx I2C Instance.
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2C_EnableClockStretching(I2C_TypeDef *I2Cx)
+{
+ CLEAR_BIT(I2Cx->CR1, I2C_CR1_NOSTRETCH);
+}
+
+/**
+ * @brief Disable Clock stretching.
+ * @note This bit can only be programmed when the I2C is disabled (PE = 0).
+ * @rmtoll CR1 NOSTRETCH LL_I2C_DisableClockStretching
+ * @param I2Cx I2C Instance.
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2C_DisableClockStretching(I2C_TypeDef *I2Cx)
+{
+ SET_BIT(I2Cx->CR1, I2C_CR1_NOSTRETCH);
+}
+
+/**
+ * @brief Check if Clock stretching is enabled or disabled.
+ * @rmtoll CR1 NOSTRETCH LL_I2C_IsEnabledClockStretching
+ * @param I2Cx I2C Instance.
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_I2C_IsEnabledClockStretching(I2C_TypeDef *I2Cx)
+{
+ return ((READ_BIT(I2Cx->CR1, I2C_CR1_NOSTRETCH) != (I2C_CR1_NOSTRETCH)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Enable hardware byte control in slave mode.
+ * @rmtoll CR1 SBC LL_I2C_EnableSlaveByteControl
+ * @param I2Cx I2C Instance.
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2C_EnableSlaveByteControl(I2C_TypeDef *I2Cx)
+{
+ SET_BIT(I2Cx->CR1, I2C_CR1_SBC);
+}
+
+/**
+ * @brief Disable hardware byte control in slave mode.
+ * @rmtoll CR1 SBC LL_I2C_DisableSlaveByteControl
+ * @param I2Cx I2C Instance.
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2C_DisableSlaveByteControl(I2C_TypeDef *I2Cx)
+{
+ CLEAR_BIT(I2Cx->CR1, I2C_CR1_SBC);
+}
+
+/**
+ * @brief Check if hardware byte control in slave mode is enabled or disabled.
+ * @rmtoll CR1 SBC LL_I2C_IsEnabledSlaveByteControl
+ * @param I2Cx I2C Instance.
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_I2C_IsEnabledSlaveByteControl(I2C_TypeDef *I2Cx)
+{
+ return ((READ_BIT(I2Cx->CR1, I2C_CR1_SBC) == (I2C_CR1_SBC)) ? 1UL : 0UL);
+}
+
+#if defined(I2C_CR1_WUPEN)
+/**
+ * @brief Enable Wakeup from STOP.
+ * @note Macro @ref IS_I2C_WAKEUP_FROMSTOP_INSTANCE(I2Cx) can be used to check whether or not
+ * WakeUpFromStop feature is supported by the I2Cx Instance.
+ * @note This bit can only be programmed when Digital Filter is disabled.
+ * @rmtoll CR1 WUPEN LL_I2C_EnableWakeUpFromStop
+ * @param I2Cx I2C Instance.
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2C_EnableWakeUpFromStop(I2C_TypeDef *I2Cx)
+{
+ SET_BIT(I2Cx->CR1, I2C_CR1_WUPEN);
+}
+
+/**
+ * @brief Disable Wakeup from STOP.
+ * @note Macro @ref IS_I2C_WAKEUP_FROMSTOP_INSTANCE(I2Cx) can be used to check whether or not
+ * WakeUpFromStop feature is supported by the I2Cx Instance.
+ * @rmtoll CR1 WUPEN LL_I2C_DisableWakeUpFromStop
+ * @param I2Cx I2C Instance.
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2C_DisableWakeUpFromStop(I2C_TypeDef *I2Cx)
+{
+ CLEAR_BIT(I2Cx->CR1, I2C_CR1_WUPEN);
+}
+
+/**
+ * @brief Check if Wakeup from STOP is enabled or disabled.
+ * @note Macro @ref IS_I2C_WAKEUP_FROMSTOP_INSTANCE(I2Cx) can be used to check whether or not
+ * WakeUpFromStop feature is supported by the I2Cx Instance.
+ * @rmtoll CR1 WUPEN LL_I2C_IsEnabledWakeUpFromStop
+ * @param I2Cx I2C Instance.
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_I2C_IsEnabledWakeUpFromStop(I2C_TypeDef *I2Cx)
+{
+ return ((READ_BIT(I2Cx->CR1, I2C_CR1_WUPEN) == (I2C_CR1_WUPEN)) ? 1UL : 0UL);
+}
+#endif
+
+/**
+ * @brief Enable General Call.
+ * @note When enabled the Address 0x00 is ACKed.
+ * @rmtoll CR1 GCEN LL_I2C_EnableGeneralCall
+ * @param I2Cx I2C Instance.
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2C_EnableGeneralCall(I2C_TypeDef *I2Cx)
+{
+ SET_BIT(I2Cx->CR1, I2C_CR1_GCEN);
+}
+
+/**
+ * @brief Disable General Call.
+ * @note When disabled the Address 0x00 is NACKed.
+ * @rmtoll CR1 GCEN LL_I2C_DisableGeneralCall
+ * @param I2Cx I2C Instance.
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2C_DisableGeneralCall(I2C_TypeDef *I2Cx)
+{
+ CLEAR_BIT(I2Cx->CR1, I2C_CR1_GCEN);
+}
+
+/**
+ * @brief Check if General Call is enabled or disabled.
+ * @rmtoll CR1 GCEN LL_I2C_IsEnabledGeneralCall
+ * @param I2Cx I2C Instance.
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_I2C_IsEnabledGeneralCall(I2C_TypeDef *I2Cx)
+{
+ return ((READ_BIT(I2Cx->CR1, I2C_CR1_GCEN) == (I2C_CR1_GCEN)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Configure the Master to operate in 7-bit or 10-bit addressing mode.
+ * @note Changing this bit is not allowed, when the START bit is set.
+ * @rmtoll CR2 ADD10 LL_I2C_SetMasterAddressingMode
+ * @param I2Cx I2C Instance.
+ * @param AddressingMode This parameter can be one of the following values:
+ * @arg @ref LL_I2C_ADDRESSING_MODE_7BIT
+ * @arg @ref LL_I2C_ADDRESSING_MODE_10BIT
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2C_SetMasterAddressingMode(I2C_TypeDef *I2Cx, uint32_t AddressingMode)
+{
+ MODIFY_REG(I2Cx->CR2, I2C_CR2_ADD10, AddressingMode);
+}
+
+/**
+ * @brief Get the Master addressing mode.
+ * @rmtoll CR2 ADD10 LL_I2C_GetMasterAddressingMode
+ * @param I2Cx I2C Instance.
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_I2C_ADDRESSING_MODE_7BIT
+ * @arg @ref LL_I2C_ADDRESSING_MODE_10BIT
+ */
+__STATIC_INLINE uint32_t LL_I2C_GetMasterAddressingMode(I2C_TypeDef *I2Cx)
+{
+ return (uint32_t)(READ_BIT(I2Cx->CR2, I2C_CR2_ADD10));
+}
+
+/**
+ * @brief Set the Own Address1.
+ * @rmtoll OAR1 OA1 LL_I2C_SetOwnAddress1\n
+ * OAR1 OA1MODE LL_I2C_SetOwnAddress1
+ * @param I2Cx I2C Instance.
+ * @param OwnAddress1 This parameter must be a value between Min_Data=0 and Max_Data=0x3FF.
+ * @param OwnAddrSize This parameter can be one of the following values:
+ * @arg @ref LL_I2C_OWNADDRESS1_7BIT
+ * @arg @ref LL_I2C_OWNADDRESS1_10BIT
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2C_SetOwnAddress1(I2C_TypeDef *I2Cx, uint32_t OwnAddress1, uint32_t OwnAddrSize)
+{
+ MODIFY_REG(I2Cx->OAR1, I2C_OAR1_OA1 | I2C_OAR1_OA1MODE, OwnAddress1 | OwnAddrSize);
+}
+
+/**
+ * @brief Enable acknowledge on Own Address1 match address.
+ * @rmtoll OAR1 OA1EN LL_I2C_EnableOwnAddress1
+ * @param I2Cx I2C Instance.
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2C_EnableOwnAddress1(I2C_TypeDef *I2Cx)
+{
+ SET_BIT(I2Cx->OAR1, I2C_OAR1_OA1EN);
+}
+
+/**
+ * @brief Disable acknowledge on Own Address1 match address.
+ * @rmtoll OAR1 OA1EN LL_I2C_DisableOwnAddress1
+ * @param I2Cx I2C Instance.
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2C_DisableOwnAddress1(I2C_TypeDef *I2Cx)
+{
+ CLEAR_BIT(I2Cx->OAR1, I2C_OAR1_OA1EN);
+}
+
+/**
+ * @brief Check if Own Address1 acknowledge is enabled or disabled.
+ * @rmtoll OAR1 OA1EN LL_I2C_IsEnabledOwnAddress1
+ * @param I2Cx I2C Instance.
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_I2C_IsEnabledOwnAddress1(I2C_TypeDef *I2Cx)
+{
+ return ((READ_BIT(I2Cx->OAR1, I2C_OAR1_OA1EN) == (I2C_OAR1_OA1EN)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Set the 7bits Own Address2.
+ * @note This action has no effect if own address2 is enabled.
+ * @rmtoll OAR2 OA2 LL_I2C_SetOwnAddress2\n
+ * OAR2 OA2MSK LL_I2C_SetOwnAddress2
+ * @param I2Cx I2C Instance.
+ * @param OwnAddress2 Value between Min_Data=0 and Max_Data=0x7F.
+ * @param OwnAddrMask This parameter can be one of the following values:
+ * @arg @ref LL_I2C_OWNADDRESS2_NOMASK
+ * @arg @ref LL_I2C_OWNADDRESS2_MASK01
+ * @arg @ref LL_I2C_OWNADDRESS2_MASK02
+ * @arg @ref LL_I2C_OWNADDRESS2_MASK03
+ * @arg @ref LL_I2C_OWNADDRESS2_MASK04
+ * @arg @ref LL_I2C_OWNADDRESS2_MASK05
+ * @arg @ref LL_I2C_OWNADDRESS2_MASK06
+ * @arg @ref LL_I2C_OWNADDRESS2_MASK07
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2C_SetOwnAddress2(I2C_TypeDef *I2Cx, uint32_t OwnAddress2, uint32_t OwnAddrMask)
+{
+ MODIFY_REG(I2Cx->OAR2, I2C_OAR2_OA2 | I2C_OAR2_OA2MSK, OwnAddress2 | OwnAddrMask);
+}
+
+/**
+ * @brief Enable acknowledge on Own Address2 match address.
+ * @rmtoll OAR2 OA2EN LL_I2C_EnableOwnAddress2
+ * @param I2Cx I2C Instance.
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2C_EnableOwnAddress2(I2C_TypeDef *I2Cx)
+{
+ SET_BIT(I2Cx->OAR2, I2C_OAR2_OA2EN);
+}
+
+/**
+ * @brief Disable acknowledge on Own Address2 match address.
+ * @rmtoll OAR2 OA2EN LL_I2C_DisableOwnAddress2
+ * @param I2Cx I2C Instance.
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2C_DisableOwnAddress2(I2C_TypeDef *I2Cx)
+{
+ CLEAR_BIT(I2Cx->OAR2, I2C_OAR2_OA2EN);
+}
+
+/**
+ * @brief Check if Own Address1 acknowledge is enabled or disabled.
+ * @rmtoll OAR2 OA2EN LL_I2C_IsEnabledOwnAddress2
+ * @param I2Cx I2C Instance.
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_I2C_IsEnabledOwnAddress2(I2C_TypeDef *I2Cx)
+{
+ return ((READ_BIT(I2Cx->OAR2, I2C_OAR2_OA2EN) == (I2C_OAR2_OA2EN)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Configure the SDA setup, hold time and the SCL high, low period.
+ * @note This bit can only be programmed when the I2C is disabled (PE = 0).
+ * @rmtoll TIMINGR TIMINGR LL_I2C_SetTiming
+ * @param I2Cx I2C Instance.
+ * @param Timing This parameter must be a value between Min_Data=0 and Max_Data=0xFFFFFFFF.
+ * @note This parameter is computed with the STM32CubeMX Tool.
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2C_SetTiming(I2C_TypeDef *I2Cx, uint32_t Timing)
+{
+ WRITE_REG(I2Cx->TIMINGR, Timing);
+}
+
+/**
+ * @brief Get the Timing Prescaler setting.
+ * @rmtoll TIMINGR PRESC LL_I2C_GetTimingPrescaler
+ * @param I2Cx I2C Instance.
+ * @retval Value between Min_Data=0x0 and Max_Data=0xF
+ */
+__STATIC_INLINE uint32_t LL_I2C_GetTimingPrescaler(I2C_TypeDef *I2Cx)
+{
+ return (uint32_t)(READ_BIT(I2Cx->TIMINGR, I2C_TIMINGR_PRESC) >> I2C_TIMINGR_PRESC_Pos);
+}
+
+/**
+ * @brief Get the SCL low period setting.
+ * @rmtoll TIMINGR SCLL LL_I2C_GetClockLowPeriod
+ * @param I2Cx I2C Instance.
+ * @retval Value between Min_Data=0x00 and Max_Data=0xFF
+ */
+__STATIC_INLINE uint32_t LL_I2C_GetClockLowPeriod(I2C_TypeDef *I2Cx)
+{
+ return (uint32_t)(READ_BIT(I2Cx->TIMINGR, I2C_TIMINGR_SCLL) >> I2C_TIMINGR_SCLL_Pos);
+}
+
+/**
+ * @brief Get the SCL high period setting.
+ * @rmtoll TIMINGR SCLH LL_I2C_GetClockHighPeriod
+ * @param I2Cx I2C Instance.
+ * @retval Value between Min_Data=0x00 and Max_Data=0xFF
+ */
+__STATIC_INLINE uint32_t LL_I2C_GetClockHighPeriod(I2C_TypeDef *I2Cx)
+{
+ return (uint32_t)(READ_BIT(I2Cx->TIMINGR, I2C_TIMINGR_SCLH) >> I2C_TIMINGR_SCLH_Pos);
+}
+
+/**
+ * @brief Get the SDA hold time.
+ * @rmtoll TIMINGR SDADEL LL_I2C_GetDataHoldTime
+ * @param I2Cx I2C Instance.
+ * @retval Value between Min_Data=0x0 and Max_Data=0xF
+ */
+__STATIC_INLINE uint32_t LL_I2C_GetDataHoldTime(I2C_TypeDef *I2Cx)
+{
+ return (uint32_t)(READ_BIT(I2Cx->TIMINGR, I2C_TIMINGR_SDADEL) >> I2C_TIMINGR_SDADEL_Pos);
+}
+
+/**
+ * @brief Get the SDA setup time.
+ * @rmtoll TIMINGR SCLDEL LL_I2C_GetDataSetupTime
+ * @param I2Cx I2C Instance.
+ * @retval Value between Min_Data=0x0 and Max_Data=0xF
+ */
+__STATIC_INLINE uint32_t LL_I2C_GetDataSetupTime(I2C_TypeDef *I2Cx)
+{
+ return (uint32_t)(READ_BIT(I2Cx->TIMINGR, I2C_TIMINGR_SCLDEL) >> I2C_TIMINGR_SCLDEL_Pos);
+}
+
+/**
+ * @brief Configure peripheral mode.
+ * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+ * SMBus feature is supported by the I2Cx Instance.
+ * @rmtoll CR1 SMBHEN LL_I2C_SetMode\n
+ * CR1 SMBDEN LL_I2C_SetMode
+ * @param I2Cx I2C Instance.
+ * @param PeripheralMode This parameter can be one of the following values:
+ * @arg @ref LL_I2C_MODE_I2C
+ * @arg @ref LL_I2C_MODE_SMBUS_HOST
+ * @arg @ref LL_I2C_MODE_SMBUS_DEVICE
+ * @arg @ref LL_I2C_MODE_SMBUS_DEVICE_ARP
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2C_SetMode(I2C_TypeDef *I2Cx, uint32_t PeripheralMode)
+{
+ MODIFY_REG(I2Cx->CR1, I2C_CR1_SMBHEN | I2C_CR1_SMBDEN, PeripheralMode);
+}
+
+/**
+ * @brief Get peripheral mode.
+ * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+ * SMBus feature is supported by the I2Cx Instance.
+ * @rmtoll CR1 SMBHEN LL_I2C_GetMode\n
+ * CR1 SMBDEN LL_I2C_GetMode
+ * @param I2Cx I2C Instance.
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_I2C_MODE_I2C
+ * @arg @ref LL_I2C_MODE_SMBUS_HOST
+ * @arg @ref LL_I2C_MODE_SMBUS_DEVICE
+ * @arg @ref LL_I2C_MODE_SMBUS_DEVICE_ARP
+ */
+__STATIC_INLINE uint32_t LL_I2C_GetMode(I2C_TypeDef *I2Cx)
+{
+ return (uint32_t)(READ_BIT(I2Cx->CR1, I2C_CR1_SMBHEN | I2C_CR1_SMBDEN));
+}
+
+/**
+ * @brief Enable SMBus alert (Host or Device mode)
+ * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+ * SMBus feature is supported by the I2Cx Instance.
+ * @note SMBus Device mode:
+ * - SMBus Alert pin is drived low and
+ * Alert Response Address Header acknowledge is enabled.
+ * SMBus Host mode:
+ * - SMBus Alert pin management is supported.
+ * @rmtoll CR1 ALERTEN LL_I2C_EnableSMBusAlert
+ * @param I2Cx I2C Instance.
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2C_EnableSMBusAlert(I2C_TypeDef *I2Cx)
+{
+ SET_BIT(I2Cx->CR1, I2C_CR1_ALERTEN);
+}
+
+/**
+ * @brief Disable SMBus alert (Host or Device mode)
+ * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+ * SMBus feature is supported by the I2Cx Instance.
+ * @note SMBus Device mode:
+ * - SMBus Alert pin is not drived (can be used as a standard GPIO) and
+ * Alert Response Address Header acknowledge is disabled.
+ * SMBus Host mode:
+ * - SMBus Alert pin management is not supported.
+ * @rmtoll CR1 ALERTEN LL_I2C_DisableSMBusAlert
+ * @param I2Cx I2C Instance.
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2C_DisableSMBusAlert(I2C_TypeDef *I2Cx)
+{
+ CLEAR_BIT(I2Cx->CR1, I2C_CR1_ALERTEN);
+}
+
+/**
+ * @brief Check if SMBus alert (Host or Device mode) is enabled or disabled.
+ * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+ * SMBus feature is supported by the I2Cx Instance.
+ * @rmtoll CR1 ALERTEN LL_I2C_IsEnabledSMBusAlert
+ * @param I2Cx I2C Instance.
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_I2C_IsEnabledSMBusAlert(I2C_TypeDef *I2Cx)
+{
+ return ((READ_BIT(I2Cx->CR1, I2C_CR1_ALERTEN) == (I2C_CR1_ALERTEN)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Enable SMBus Packet Error Calculation (PEC).
+ * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+ * SMBus feature is supported by the I2Cx Instance.
+ * @rmtoll CR1 PECEN LL_I2C_EnableSMBusPEC
+ * @param I2Cx I2C Instance.
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2C_EnableSMBusPEC(I2C_TypeDef *I2Cx)
+{
+ SET_BIT(I2Cx->CR1, I2C_CR1_PECEN);
+}
+
+/**
+ * @brief Disable SMBus Packet Error Calculation (PEC).
+ * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+ * SMBus feature is supported by the I2Cx Instance.
+ * @rmtoll CR1 PECEN LL_I2C_DisableSMBusPEC
+ * @param I2Cx I2C Instance.
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2C_DisableSMBusPEC(I2C_TypeDef *I2Cx)
+{
+ CLEAR_BIT(I2Cx->CR1, I2C_CR1_PECEN);
+}
+
+/**
+ * @brief Check if SMBus Packet Error Calculation (PEC) is enabled or disabled.
+ * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+ * SMBus feature is supported by the I2Cx Instance.
+ * @rmtoll CR1 PECEN LL_I2C_IsEnabledSMBusPEC
+ * @param I2Cx I2C Instance.
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_I2C_IsEnabledSMBusPEC(I2C_TypeDef *I2Cx)
+{
+ return ((READ_BIT(I2Cx->CR1, I2C_CR1_PECEN) == (I2C_CR1_PECEN)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Configure the SMBus Clock Timeout.
+ * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+ * SMBus feature is supported by the I2Cx Instance.
+ * @note This configuration can only be programmed when associated Timeout is disabled (TimeoutA and/orTimeoutB).
+ * @rmtoll TIMEOUTR TIMEOUTA LL_I2C_ConfigSMBusTimeout\n
+ * TIMEOUTR TIDLE LL_I2C_ConfigSMBusTimeout\n
+ * TIMEOUTR TIMEOUTB LL_I2C_ConfigSMBusTimeout
+ * @param I2Cx I2C Instance.
+ * @param TimeoutA This parameter must be a value between Min_Data=0 and Max_Data=0xFFF.
+ * @param TimeoutAMode This parameter can be one of the following values:
+ * @arg @ref LL_I2C_SMBUS_TIMEOUTA_MODE_SCL_LOW
+ * @arg @ref LL_I2C_SMBUS_TIMEOUTA_MODE_SDA_SCL_HIGH
+ * @param TimeoutB
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2C_ConfigSMBusTimeout(I2C_TypeDef *I2Cx, uint32_t TimeoutA, uint32_t TimeoutAMode,
+ uint32_t TimeoutB)
+{
+ MODIFY_REG(I2Cx->TIMEOUTR, I2C_TIMEOUTR_TIMEOUTA | I2C_TIMEOUTR_TIDLE | I2C_TIMEOUTR_TIMEOUTB,
+ TimeoutA | TimeoutAMode | (TimeoutB << I2C_TIMEOUTR_TIMEOUTB_Pos));
+}
+
+/**
+ * @brief Configure the SMBus Clock TimeoutA (SCL low timeout or SCL and SDA high timeout depends on TimeoutA mode).
+ * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+ * SMBus feature is supported by the I2Cx Instance.
+ * @note These bits can only be programmed when TimeoutA is disabled.
+ * @rmtoll TIMEOUTR TIMEOUTA LL_I2C_SetSMBusTimeoutA
+ * @param I2Cx I2C Instance.
+ * @param TimeoutA This parameter must be a value between Min_Data=0 and Max_Data=0xFFF.
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2C_SetSMBusTimeoutA(I2C_TypeDef *I2Cx, uint32_t TimeoutA)
+{
+ WRITE_REG(I2Cx->TIMEOUTR, TimeoutA);
+}
+
+/**
+ * @brief Get the SMBus Clock TimeoutA setting.
+ * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+ * SMBus feature is supported by the I2Cx Instance.
+ * @rmtoll TIMEOUTR TIMEOUTA LL_I2C_GetSMBusTimeoutA
+ * @param I2Cx I2C Instance.
+ * @retval Value between Min_Data=0 and Max_Data=0xFFF
+ */
+__STATIC_INLINE uint32_t LL_I2C_GetSMBusTimeoutA(I2C_TypeDef *I2Cx)
+{
+ return (uint32_t)(READ_BIT(I2Cx->TIMEOUTR, I2C_TIMEOUTR_TIMEOUTA));
+}
+
+/**
+ * @brief Set the SMBus Clock TimeoutA mode.
+ * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+ * SMBus feature is supported by the I2Cx Instance.
+ * @note This bit can only be programmed when TimeoutA is disabled.
+ * @rmtoll TIMEOUTR TIDLE LL_I2C_SetSMBusTimeoutAMode
+ * @param I2Cx I2C Instance.
+ * @param TimeoutAMode This parameter can be one of the following values:
+ * @arg @ref LL_I2C_SMBUS_TIMEOUTA_MODE_SCL_LOW
+ * @arg @ref LL_I2C_SMBUS_TIMEOUTA_MODE_SDA_SCL_HIGH
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2C_SetSMBusTimeoutAMode(I2C_TypeDef *I2Cx, uint32_t TimeoutAMode)
+{
+ WRITE_REG(I2Cx->TIMEOUTR, TimeoutAMode);
+}
+
+/**
+ * @brief Get the SMBus Clock TimeoutA mode.
+ * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+ * SMBus feature is supported by the I2Cx Instance.
+ * @rmtoll TIMEOUTR TIDLE LL_I2C_GetSMBusTimeoutAMode
+ * @param I2Cx I2C Instance.
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_I2C_SMBUS_TIMEOUTA_MODE_SCL_LOW
+ * @arg @ref LL_I2C_SMBUS_TIMEOUTA_MODE_SDA_SCL_HIGH
+ */
+__STATIC_INLINE uint32_t LL_I2C_GetSMBusTimeoutAMode(I2C_TypeDef *I2Cx)
+{
+ return (uint32_t)(READ_BIT(I2Cx->TIMEOUTR, I2C_TIMEOUTR_TIDLE));
+}
+
+/**
+ * @brief Configure the SMBus Extended Cumulative Clock TimeoutB (Master or Slave mode).
+ * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+ * SMBus feature is supported by the I2Cx Instance.
+ * @note These bits can only be programmed when TimeoutB is disabled.
+ * @rmtoll TIMEOUTR TIMEOUTB LL_I2C_SetSMBusTimeoutB
+ * @param I2Cx I2C Instance.
+ * @param TimeoutB This parameter must be a value between Min_Data=0 and Max_Data=0xFFF.
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2C_SetSMBusTimeoutB(I2C_TypeDef *I2Cx, uint32_t TimeoutB)
+{
+ WRITE_REG(I2Cx->TIMEOUTR, TimeoutB << I2C_TIMEOUTR_TIMEOUTB_Pos);
+}
+
+/**
+ * @brief Get the SMBus Extented Cumulative Clock TimeoutB setting.
+ * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+ * SMBus feature is supported by the I2Cx Instance.
+ * @rmtoll TIMEOUTR TIMEOUTB LL_I2C_GetSMBusTimeoutB
+ * @param I2Cx I2C Instance.
+ * @retval Value between Min_Data=0 and Max_Data=0xFFF
+ */
+__STATIC_INLINE uint32_t LL_I2C_GetSMBusTimeoutB(I2C_TypeDef *I2Cx)
+{
+ return (uint32_t)(READ_BIT(I2Cx->TIMEOUTR, I2C_TIMEOUTR_TIMEOUTB) >> I2C_TIMEOUTR_TIMEOUTB_Pos);
+}
+
+/**
+ * @brief Enable the SMBus Clock Timeout.
+ * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+ * SMBus feature is supported by the I2Cx Instance.
+ * @rmtoll TIMEOUTR TIMOUTEN LL_I2C_EnableSMBusTimeout\n
+ * TIMEOUTR TEXTEN LL_I2C_EnableSMBusTimeout
+ * @param I2Cx I2C Instance.
+ * @param ClockTimeout This parameter can be one of the following values:
+ * @arg @ref LL_I2C_SMBUS_TIMEOUTA
+ * @arg @ref LL_I2C_SMBUS_TIMEOUTB
+ * @arg @ref LL_I2C_SMBUS_ALL_TIMEOUT
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2C_EnableSMBusTimeout(I2C_TypeDef *I2Cx, uint32_t ClockTimeout)
+{
+ SET_BIT(I2Cx->TIMEOUTR, ClockTimeout);
+}
+
+/**
+ * @brief Disable the SMBus Clock Timeout.
+ * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+ * SMBus feature is supported by the I2Cx Instance.
+ * @rmtoll TIMEOUTR TIMOUTEN LL_I2C_DisableSMBusTimeout\n
+ * TIMEOUTR TEXTEN LL_I2C_DisableSMBusTimeout
+ * @param I2Cx I2C Instance.
+ * @param ClockTimeout This parameter can be one of the following values:
+ * @arg @ref LL_I2C_SMBUS_TIMEOUTA
+ * @arg @ref LL_I2C_SMBUS_TIMEOUTB
+ * @arg @ref LL_I2C_SMBUS_ALL_TIMEOUT
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2C_DisableSMBusTimeout(I2C_TypeDef *I2Cx, uint32_t ClockTimeout)
+{
+ CLEAR_BIT(I2Cx->TIMEOUTR, ClockTimeout);
+}
+
+/**
+ * @brief Check if the SMBus Clock Timeout is enabled or disabled.
+ * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+ * SMBus feature is supported by the I2Cx Instance.
+ * @rmtoll TIMEOUTR TIMOUTEN LL_I2C_IsEnabledSMBusTimeout\n
+ * TIMEOUTR TEXTEN LL_I2C_IsEnabledSMBusTimeout
+ * @param I2Cx I2C Instance.
+ * @param ClockTimeout This parameter can be one of the following values:
+ * @arg @ref LL_I2C_SMBUS_TIMEOUTA
+ * @arg @ref LL_I2C_SMBUS_TIMEOUTB
+ * @arg @ref LL_I2C_SMBUS_ALL_TIMEOUT
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_I2C_IsEnabledSMBusTimeout(I2C_TypeDef *I2Cx, uint32_t ClockTimeout)
+{
+ return ((READ_BIT(I2Cx->TIMEOUTR, (I2C_TIMEOUTR_TIMOUTEN | I2C_TIMEOUTR_TEXTEN)) == (ClockTimeout)) ? 1UL : 0UL);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup I2C_LL_EF_IT_Management IT_Management
+ * @{
+ */
+
+/**
+ * @brief Enable TXIS interrupt.
+ * @rmtoll CR1 TXIE LL_I2C_EnableIT_TX
+ * @param I2Cx I2C Instance.
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2C_EnableIT_TX(I2C_TypeDef *I2Cx)
+{
+ SET_BIT(I2Cx->CR1, I2C_CR1_TXIE);
+}
+
+/**
+ * @brief Disable TXIS interrupt.
+ * @rmtoll CR1 TXIE LL_I2C_DisableIT_TX
+ * @param I2Cx I2C Instance.
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2C_DisableIT_TX(I2C_TypeDef *I2Cx)
+{
+ CLEAR_BIT(I2Cx->CR1, I2C_CR1_TXIE);
+}
+
+/**
+ * @brief Check if the TXIS Interrupt is enabled or disabled.
+ * @rmtoll CR1 TXIE LL_I2C_IsEnabledIT_TX
+ * @param I2Cx I2C Instance.
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_I2C_IsEnabledIT_TX(I2C_TypeDef *I2Cx)
+{
+ return ((READ_BIT(I2Cx->CR1, I2C_CR1_TXIE) == (I2C_CR1_TXIE)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Enable RXNE interrupt.
+ * @rmtoll CR1 RXIE LL_I2C_EnableIT_RX
+ * @param I2Cx I2C Instance.
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2C_EnableIT_RX(I2C_TypeDef *I2Cx)
+{
+ SET_BIT(I2Cx->CR1, I2C_CR1_RXIE);
+}
+
+/**
+ * @brief Disable RXNE interrupt.
+ * @rmtoll CR1 RXIE LL_I2C_DisableIT_RX
+ * @param I2Cx I2C Instance.
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2C_DisableIT_RX(I2C_TypeDef *I2Cx)
+{
+ CLEAR_BIT(I2Cx->CR1, I2C_CR1_RXIE);
+}
+
+/**
+ * @brief Check if the RXNE Interrupt is enabled or disabled.
+ * @rmtoll CR1 RXIE LL_I2C_IsEnabledIT_RX
+ * @param I2Cx I2C Instance.
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_I2C_IsEnabledIT_RX(I2C_TypeDef *I2Cx)
+{
+ return ((READ_BIT(I2Cx->CR1, I2C_CR1_RXIE) == (I2C_CR1_RXIE)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Enable Address match interrupt (slave mode only).
+ * @rmtoll CR1 ADDRIE LL_I2C_EnableIT_ADDR
+ * @param I2Cx I2C Instance.
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2C_EnableIT_ADDR(I2C_TypeDef *I2Cx)
+{
+ SET_BIT(I2Cx->CR1, I2C_CR1_ADDRIE);
+}
+
+/**
+ * @brief Disable Address match interrupt (slave mode only).
+ * @rmtoll CR1 ADDRIE LL_I2C_DisableIT_ADDR
+ * @param I2Cx I2C Instance.
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2C_DisableIT_ADDR(I2C_TypeDef *I2Cx)
+{
+ CLEAR_BIT(I2Cx->CR1, I2C_CR1_ADDRIE);
+}
+
+/**
+ * @brief Check if Address match interrupt is enabled or disabled.
+ * @rmtoll CR1 ADDRIE LL_I2C_IsEnabledIT_ADDR
+ * @param I2Cx I2C Instance.
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_I2C_IsEnabledIT_ADDR(I2C_TypeDef *I2Cx)
+{
+ return ((READ_BIT(I2Cx->CR1, I2C_CR1_ADDRIE) == (I2C_CR1_ADDRIE)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Enable Not acknowledge received interrupt.
+ * @rmtoll CR1 NACKIE LL_I2C_EnableIT_NACK
+ * @param I2Cx I2C Instance.
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2C_EnableIT_NACK(I2C_TypeDef *I2Cx)
+{
+ SET_BIT(I2Cx->CR1, I2C_CR1_NACKIE);
+}
+
+/**
+ * @brief Disable Not acknowledge received interrupt.
+ * @rmtoll CR1 NACKIE LL_I2C_DisableIT_NACK
+ * @param I2Cx I2C Instance.
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2C_DisableIT_NACK(I2C_TypeDef *I2Cx)
+{
+ CLEAR_BIT(I2Cx->CR1, I2C_CR1_NACKIE);
+}
+
+/**
+ * @brief Check if Not acknowledge received interrupt is enabled or disabled.
+ * @rmtoll CR1 NACKIE LL_I2C_IsEnabledIT_NACK
+ * @param I2Cx I2C Instance.
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_I2C_IsEnabledIT_NACK(I2C_TypeDef *I2Cx)
+{
+ return ((READ_BIT(I2Cx->CR1, I2C_CR1_NACKIE) == (I2C_CR1_NACKIE)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Enable STOP detection interrupt.
+ * @rmtoll CR1 STOPIE LL_I2C_EnableIT_STOP
+ * @param I2Cx I2C Instance.
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2C_EnableIT_STOP(I2C_TypeDef *I2Cx)
+{
+ SET_BIT(I2Cx->CR1, I2C_CR1_STOPIE);
+}
+
+/**
+ * @brief Disable STOP detection interrupt.
+ * @rmtoll CR1 STOPIE LL_I2C_DisableIT_STOP
+ * @param I2Cx I2C Instance.
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2C_DisableIT_STOP(I2C_TypeDef *I2Cx)
+{
+ CLEAR_BIT(I2Cx->CR1, I2C_CR1_STOPIE);
+}
+
+/**
+ * @brief Check if STOP detection interrupt is enabled or disabled.
+ * @rmtoll CR1 STOPIE LL_I2C_IsEnabledIT_STOP
+ * @param I2Cx I2C Instance.
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_I2C_IsEnabledIT_STOP(I2C_TypeDef *I2Cx)
+{
+ return ((READ_BIT(I2Cx->CR1, I2C_CR1_STOPIE) == (I2C_CR1_STOPIE)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Enable Transfer Complete interrupt.
+ * @note Any of these events will generate interrupt :
+ * Transfer Complete (TC)
+ * Transfer Complete Reload (TCR)
+ * @rmtoll CR1 TCIE LL_I2C_EnableIT_TC
+ * @param I2Cx I2C Instance.
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2C_EnableIT_TC(I2C_TypeDef *I2Cx)
+{
+ SET_BIT(I2Cx->CR1, I2C_CR1_TCIE);
+}
+
+/**
+ * @brief Disable Transfer Complete interrupt.
+ * @note Any of these events will generate interrupt :
+ * Transfer Complete (TC)
+ * Transfer Complete Reload (TCR)
+ * @rmtoll CR1 TCIE LL_I2C_DisableIT_TC
+ * @param I2Cx I2C Instance.
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2C_DisableIT_TC(I2C_TypeDef *I2Cx)
+{
+ CLEAR_BIT(I2Cx->CR1, I2C_CR1_TCIE);
+}
+
+/**
+ * @brief Check if Transfer Complete interrupt is enabled or disabled.
+ * @rmtoll CR1 TCIE LL_I2C_IsEnabledIT_TC
+ * @param I2Cx I2C Instance.
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_I2C_IsEnabledIT_TC(I2C_TypeDef *I2Cx)
+{
+ return ((READ_BIT(I2Cx->CR1, I2C_CR1_TCIE) == (I2C_CR1_TCIE)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Enable Error interrupts.
+ * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+ * SMBus feature is supported by the I2Cx Instance.
+ * @note Any of these errors will generate interrupt :
+ * Arbitration Loss (ARLO)
+ * Bus Error detection (BERR)
+ * Overrun/Underrun (OVR)
+ * SMBus Timeout detection (TIMEOUT)
+ * SMBus PEC error detection (PECERR)
+ * SMBus Alert pin event detection (ALERT)
+ * @rmtoll CR1 ERRIE LL_I2C_EnableIT_ERR
+ * @param I2Cx I2C Instance.
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2C_EnableIT_ERR(I2C_TypeDef *I2Cx)
+{
+ SET_BIT(I2Cx->CR1, I2C_CR1_ERRIE);
+}
+
+/**
+ * @brief Disable Error interrupts.
+ * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+ * SMBus feature is supported by the I2Cx Instance.
+ * @note Any of these errors will generate interrupt :
+ * Arbitration Loss (ARLO)
+ * Bus Error detection (BERR)
+ * Overrun/Underrun (OVR)
+ * SMBus Timeout detection (TIMEOUT)
+ * SMBus PEC error detection (PECERR)
+ * SMBus Alert pin event detection (ALERT)
+ * @rmtoll CR1 ERRIE LL_I2C_DisableIT_ERR
+ * @param I2Cx I2C Instance.
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2C_DisableIT_ERR(I2C_TypeDef *I2Cx)
+{
+ CLEAR_BIT(I2Cx->CR1, I2C_CR1_ERRIE);
+}
+
+/**
+ * @brief Check if Error interrupts are enabled or disabled.
+ * @rmtoll CR1 ERRIE LL_I2C_IsEnabledIT_ERR
+ * @param I2Cx I2C Instance.
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_I2C_IsEnabledIT_ERR(I2C_TypeDef *I2Cx)
+{
+ return ((READ_BIT(I2Cx->CR1, I2C_CR1_ERRIE) == (I2C_CR1_ERRIE)) ? 1UL : 0UL);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup I2C_LL_EF_FLAG_management FLAG_management
+ * @{
+ */
+
+/**
+ * @brief Indicate the status of Transmit data register empty flag.
+ * @note RESET: When next data is written in Transmit data register.
+ * SET: When Transmit data register is empty.
+ * @rmtoll ISR TXE LL_I2C_IsActiveFlag_TXE
+ * @param I2Cx I2C Instance.
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_TXE(I2C_TypeDef *I2Cx)
+{
+ return ((READ_BIT(I2Cx->ISR, I2C_ISR_TXE) == (I2C_ISR_TXE)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Indicate the status of Transmit interrupt flag.
+ * @note RESET: When next data is written in Transmit data register.
+ * SET: When Transmit data register is empty.
+ * @rmtoll ISR TXIS LL_I2C_IsActiveFlag_TXIS
+ * @param I2Cx I2C Instance.
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_TXIS(I2C_TypeDef *I2Cx)
+{
+ return ((READ_BIT(I2Cx->ISR, I2C_ISR_TXIS) == (I2C_ISR_TXIS)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Indicate the status of Receive data register not empty flag.
+ * @note RESET: When Receive data register is read.
+ * SET: When the received data is copied in Receive data register.
+ * @rmtoll ISR RXNE LL_I2C_IsActiveFlag_RXNE
+ * @param I2Cx I2C Instance.
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_RXNE(I2C_TypeDef *I2Cx)
+{
+ return ((READ_BIT(I2Cx->ISR, I2C_ISR_RXNE) == (I2C_ISR_RXNE)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Indicate the status of Address matched flag (slave mode).
+ * @note RESET: Clear default value.
+ * SET: When the received slave address matched with one of the enabled slave address.
+ * @rmtoll ISR ADDR LL_I2C_IsActiveFlag_ADDR
+ * @param I2Cx I2C Instance.
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_ADDR(I2C_TypeDef *I2Cx)
+{
+ return ((READ_BIT(I2Cx->ISR, I2C_ISR_ADDR) == (I2C_ISR_ADDR)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Indicate the status of Not Acknowledge received flag.
+ * @note RESET: Clear default value.
+ * SET: When a NACK is received after a byte transmission.
+ * @rmtoll ISR NACKF LL_I2C_IsActiveFlag_NACK
+ * @param I2Cx I2C Instance.
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_NACK(I2C_TypeDef *I2Cx)
+{
+ return ((READ_BIT(I2Cx->ISR, I2C_ISR_NACKF) == (I2C_ISR_NACKF)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Indicate the status of Stop detection flag.
+ * @note RESET: Clear default value.
+ * SET: When a Stop condition is detected.
+ * @rmtoll ISR STOPF LL_I2C_IsActiveFlag_STOP
+ * @param I2Cx I2C Instance.
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_STOP(I2C_TypeDef *I2Cx)
+{
+ return ((READ_BIT(I2Cx->ISR, I2C_ISR_STOPF) == (I2C_ISR_STOPF)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Indicate the status of Transfer complete flag (master mode).
+ * @note RESET: Clear default value.
+ * SET: When RELOAD=0, AUTOEND=0 and NBYTES date have been transferred.
+ * @rmtoll ISR TC LL_I2C_IsActiveFlag_TC
+ * @param I2Cx I2C Instance.
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_TC(I2C_TypeDef *I2Cx)
+{
+ return ((READ_BIT(I2Cx->ISR, I2C_ISR_TC) == (I2C_ISR_TC)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Indicate the status of Transfer complete flag (master mode).
+ * @note RESET: Clear default value.
+ * SET: When RELOAD=1 and NBYTES date have been transferred.
+ * @rmtoll ISR TCR LL_I2C_IsActiveFlag_TCR
+ * @param I2Cx I2C Instance.
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_TCR(I2C_TypeDef *I2Cx)
+{
+ return ((READ_BIT(I2Cx->ISR, I2C_ISR_TCR) == (I2C_ISR_TCR)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Indicate the status of Bus error flag.
+ * @note RESET: Clear default value.
+ * SET: When a misplaced Start or Stop condition is detected.
+ * @rmtoll ISR BERR LL_I2C_IsActiveFlag_BERR
+ * @param I2Cx I2C Instance.
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_BERR(I2C_TypeDef *I2Cx)
+{
+ return ((READ_BIT(I2Cx->ISR, I2C_ISR_BERR) == (I2C_ISR_BERR)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Indicate the status of Arbitration lost flag.
+ * @note RESET: Clear default value.
+ * SET: When arbitration lost.
+ * @rmtoll ISR ARLO LL_I2C_IsActiveFlag_ARLO
+ * @param I2Cx I2C Instance.
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_ARLO(I2C_TypeDef *I2Cx)
+{
+ return ((READ_BIT(I2Cx->ISR, I2C_ISR_ARLO) == (I2C_ISR_ARLO)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Indicate the status of Overrun/Underrun flag (slave mode).
+ * @note RESET: Clear default value.
+ * SET: When an overrun/underrun error occurs (Clock Stretching Disabled).
+ * @rmtoll ISR OVR LL_I2C_IsActiveFlag_OVR
+ * @param I2Cx I2C Instance.
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_OVR(I2C_TypeDef *I2Cx)
+{
+ return ((READ_BIT(I2Cx->ISR, I2C_ISR_OVR) == (I2C_ISR_OVR)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Indicate the status of SMBus PEC error flag in reception.
+ * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+ * SMBus feature is supported by the I2Cx Instance.
+ * @note RESET: Clear default value.
+ * SET: When the received PEC does not match with the PEC register content.
+ * @rmtoll ISR PECERR LL_I2C_IsActiveSMBusFlag_PECERR
+ * @param I2Cx I2C Instance.
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_I2C_IsActiveSMBusFlag_PECERR(I2C_TypeDef *I2Cx)
+{
+ return ((READ_BIT(I2Cx->ISR, I2C_ISR_PECERR) == (I2C_ISR_PECERR)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Indicate the status of SMBus Timeout detection flag.
+ * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+ * SMBus feature is supported by the I2Cx Instance.
+ * @note RESET: Clear default value.
+ * SET: When a timeout or extended clock timeout occurs.
+ * @rmtoll ISR TIMEOUT LL_I2C_IsActiveSMBusFlag_TIMEOUT
+ * @param I2Cx I2C Instance.
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_I2C_IsActiveSMBusFlag_TIMEOUT(I2C_TypeDef *I2Cx)
+{
+ return ((READ_BIT(I2Cx->ISR, I2C_ISR_TIMEOUT) == (I2C_ISR_TIMEOUT)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Indicate the status of SMBus alert flag.
+ * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+ * SMBus feature is supported by the I2Cx Instance.
+ * @note RESET: Clear default value.
+ * SET: When SMBus host configuration, SMBus alert enabled and
+ * a falling edge event occurs on SMBA pin.
+ * @rmtoll ISR ALERT LL_I2C_IsActiveSMBusFlag_ALERT
+ * @param I2Cx I2C Instance.
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_I2C_IsActiveSMBusFlag_ALERT(I2C_TypeDef *I2Cx)
+{
+ return ((READ_BIT(I2Cx->ISR, I2C_ISR_ALERT) == (I2C_ISR_ALERT)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Indicate the status of Bus Busy flag.
+ * @note RESET: Clear default value.
+ * SET: When a Start condition is detected.
+ * @rmtoll ISR BUSY LL_I2C_IsActiveFlag_BUSY
+ * @param I2Cx I2C Instance.
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_BUSY(I2C_TypeDef *I2Cx)
+{
+ return ((READ_BIT(I2Cx->ISR, I2C_ISR_BUSY) == (I2C_ISR_BUSY)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Clear Address Matched flag.
+ * @rmtoll ICR ADDRCF LL_I2C_ClearFlag_ADDR
+ * @param I2Cx I2C Instance.
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2C_ClearFlag_ADDR(I2C_TypeDef *I2Cx)
+{
+ SET_BIT(I2Cx->ICR, I2C_ICR_ADDRCF);
+}
+
+/**
+ * @brief Clear Not Acknowledge flag.
+ * @rmtoll ICR NACKCF LL_I2C_ClearFlag_NACK
+ * @param I2Cx I2C Instance.
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2C_ClearFlag_NACK(I2C_TypeDef *I2Cx)
+{
+ SET_BIT(I2Cx->ICR, I2C_ICR_NACKCF);
+}
+
+/**
+ * @brief Clear Stop detection flag.
+ * @rmtoll ICR STOPCF LL_I2C_ClearFlag_STOP
+ * @param I2Cx I2C Instance.
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2C_ClearFlag_STOP(I2C_TypeDef *I2Cx)
+{
+ SET_BIT(I2Cx->ICR, I2C_ICR_STOPCF);
+}
+
+/**
+ * @brief Clear Transmit data register empty flag (TXE).
+ * @note This bit can be clear by software in order to flush the transmit data register (TXDR).
+ * @rmtoll ISR TXE LL_I2C_ClearFlag_TXE
+ * @param I2Cx I2C Instance.
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2C_ClearFlag_TXE(I2C_TypeDef *I2Cx)
+{
+ WRITE_REG(I2Cx->ISR, I2C_ISR_TXE);
+}
+
+/**
+ * @brief Clear Bus error flag.
+ * @rmtoll ICR BERRCF LL_I2C_ClearFlag_BERR
+ * @param I2Cx I2C Instance.
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2C_ClearFlag_BERR(I2C_TypeDef *I2Cx)
+{
+ SET_BIT(I2Cx->ICR, I2C_ICR_BERRCF);
+}
+
+/**
+ * @brief Clear Arbitration lost flag.
+ * @rmtoll ICR ARLOCF LL_I2C_ClearFlag_ARLO
+ * @param I2Cx I2C Instance.
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2C_ClearFlag_ARLO(I2C_TypeDef *I2Cx)
+{
+ SET_BIT(I2Cx->ICR, I2C_ICR_ARLOCF);
+}
+
+/**
+ * @brief Clear Overrun/Underrun flag.
+ * @rmtoll ICR OVRCF LL_I2C_ClearFlag_OVR
+ * @param I2Cx I2C Instance.
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2C_ClearFlag_OVR(I2C_TypeDef *I2Cx)
+{
+ SET_BIT(I2Cx->ICR, I2C_ICR_OVRCF);
+}
+
+/**
+ * @brief Clear SMBus PEC error flag.
+ * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+ * SMBus feature is supported by the I2Cx Instance.
+ * @rmtoll ICR PECCF LL_I2C_ClearSMBusFlag_PECERR
+ * @param I2Cx I2C Instance.
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2C_ClearSMBusFlag_PECERR(I2C_TypeDef *I2Cx)
+{
+ SET_BIT(I2Cx->ICR, I2C_ICR_PECCF);
+}
+
+/**
+ * @brief Clear SMBus Timeout detection flag.
+ * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+ * SMBus feature is supported by the I2Cx Instance.
+ * @rmtoll ICR TIMOUTCF LL_I2C_ClearSMBusFlag_TIMEOUT
+ * @param I2Cx I2C Instance.
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2C_ClearSMBusFlag_TIMEOUT(I2C_TypeDef *I2Cx)
+{
+ SET_BIT(I2Cx->ICR, I2C_ICR_TIMOUTCF);
+}
+
+/**
+ * @brief Clear SMBus Alert flag.
+ * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+ * SMBus feature is supported by the I2Cx Instance.
+ * @rmtoll ICR ALERTCF LL_I2C_ClearSMBusFlag_ALERT
+ * @param I2Cx I2C Instance.
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2C_ClearSMBusFlag_ALERT(I2C_TypeDef *I2Cx)
+{
+ SET_BIT(I2Cx->ICR, I2C_ICR_ALERTCF);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup I2C_LL_EF_Data_Management Data_Management
+ * @{
+ */
+
+/**
+ * @brief Enable automatic STOP condition generation (master mode).
+ * @note Automatic end mode : a STOP condition is automatically sent when NBYTES data are transferred.
+ * This bit has no effect in slave mode or when RELOAD bit is set.
+ * @rmtoll CR2 AUTOEND LL_I2C_EnableAutoEndMode
+ * @param I2Cx I2C Instance.
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2C_EnableAutoEndMode(I2C_TypeDef *I2Cx)
+{
+ SET_BIT(I2Cx->CR2, I2C_CR2_AUTOEND);
+}
+
+/**
+ * @brief Disable automatic STOP condition generation (master mode).
+ * @note Software end mode : TC flag is set when NBYTES data are transferre, stretching SCL low.
+ * @rmtoll CR2 AUTOEND LL_I2C_DisableAutoEndMode
+ * @param I2Cx I2C Instance.
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2C_DisableAutoEndMode(I2C_TypeDef *I2Cx)
+{
+ CLEAR_BIT(I2Cx->CR2, I2C_CR2_AUTOEND);
+}
+
+/**
+ * @brief Check if automatic STOP condition is enabled or disabled.
+ * @rmtoll CR2 AUTOEND LL_I2C_IsEnabledAutoEndMode
+ * @param I2Cx I2C Instance.
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_I2C_IsEnabledAutoEndMode(I2C_TypeDef *I2Cx)
+{
+ return ((READ_BIT(I2Cx->CR2, I2C_CR2_AUTOEND) == (I2C_CR2_AUTOEND)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Enable reload mode (master mode).
+ * @note The transfer is not completed after the NBYTES data transfer, NBYTES will be reloaded when TCR flag is set.
+ * @rmtoll CR2 RELOAD LL_I2C_EnableReloadMode
+ * @param I2Cx I2C Instance.
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2C_EnableReloadMode(I2C_TypeDef *I2Cx)
+{
+ SET_BIT(I2Cx->CR2, I2C_CR2_RELOAD);
+}
+
+/**
+ * @brief Disable reload mode (master mode).
+ * @note The transfer is completed after the NBYTES data transfer(STOP or RESTART will follow).
+ * @rmtoll CR2 RELOAD LL_I2C_DisableReloadMode
+ * @param I2Cx I2C Instance.
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2C_DisableReloadMode(I2C_TypeDef *I2Cx)
+{
+ CLEAR_BIT(I2Cx->CR2, I2C_CR2_RELOAD);
+}
+
+/**
+ * @brief Check if reload mode is enabled or disabled.
+ * @rmtoll CR2 RELOAD LL_I2C_IsEnabledReloadMode
+ * @param I2Cx I2C Instance.
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_I2C_IsEnabledReloadMode(I2C_TypeDef *I2Cx)
+{
+ return ((READ_BIT(I2Cx->CR2, I2C_CR2_RELOAD) == (I2C_CR2_RELOAD)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Configure the number of bytes for transfer.
+ * @note Changing these bits when START bit is set is not allowed.
+ * @rmtoll CR2 NBYTES LL_I2C_SetTransferSize
+ * @param I2Cx I2C Instance.
+ * @param TransferSize This parameter must be a value between Min_Data=0x00 and Max_Data=0xFF.
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2C_SetTransferSize(I2C_TypeDef *I2Cx, uint32_t TransferSize)
+{
+ MODIFY_REG(I2Cx->CR2, I2C_CR2_NBYTES, TransferSize << I2C_CR2_NBYTES_Pos);
+}
+
+/**
+ * @brief Get the number of bytes configured for transfer.
+ * @rmtoll CR2 NBYTES LL_I2C_GetTransferSize
+ * @param I2Cx I2C Instance.
+ * @retval Value between Min_Data=0x0 and Max_Data=0xFF
+ */
+__STATIC_INLINE uint32_t LL_I2C_GetTransferSize(I2C_TypeDef *I2Cx)
+{
+ return (uint32_t)(READ_BIT(I2Cx->CR2, I2C_CR2_NBYTES) >> I2C_CR2_NBYTES_Pos);
+}
+
+/**
+ * @brief Prepare the generation of a ACKnowledge or Non ACKnowledge condition after the address receive match code or next received byte.
+ * @note Usage in Slave mode only.
+ * @rmtoll CR2 NACK LL_I2C_AcknowledgeNextData
+ * @param I2Cx I2C Instance.
+ * @param TypeAcknowledge This parameter can be one of the following values:
+ * @arg @ref LL_I2C_ACK
+ * @arg @ref LL_I2C_NACK
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2C_AcknowledgeNextData(I2C_TypeDef *I2Cx, uint32_t TypeAcknowledge)
+{
+ MODIFY_REG(I2Cx->CR2, I2C_CR2_NACK, TypeAcknowledge);
+}
+
+/**
+ * @brief Generate a START or RESTART condition
+ * @note The START bit can be set even if bus is BUSY or I2C is in slave mode.
+ * This action has no effect when RELOAD is set.
+ * @rmtoll CR2 START LL_I2C_GenerateStartCondition
+ * @param I2Cx I2C Instance.
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2C_GenerateStartCondition(I2C_TypeDef *I2Cx)
+{
+ SET_BIT(I2Cx->CR2, I2C_CR2_START);
+}
+
+/**
+ * @brief Generate a STOP condition after the current byte transfer (master mode).
+ * @rmtoll CR2 STOP LL_I2C_GenerateStopCondition
+ * @param I2Cx I2C Instance.
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2C_GenerateStopCondition(I2C_TypeDef *I2Cx)
+{
+ SET_BIT(I2Cx->CR2, I2C_CR2_STOP);
+}
+
+/**
+ * @brief Enable automatic RESTART Read request condition for 10bit address header (master mode).
+ * @note The master sends the complete 10bit slave address read sequence :
+ * Start + 2 bytes 10bit address in Write direction + Restart + first 7 bits of 10bit address in Read direction.
+ * @rmtoll CR2 HEAD10R LL_I2C_EnableAuto10BitRead
+ * @param I2Cx I2C Instance.
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2C_EnableAuto10BitRead(I2C_TypeDef *I2Cx)
+{
+ CLEAR_BIT(I2Cx->CR2, I2C_CR2_HEAD10R);
+}
+
+/**
+ * @brief Disable automatic RESTART Read request condition for 10bit address header (master mode).
+ * @note The master only sends the first 7 bits of 10bit address in Read direction.
+ * @rmtoll CR2 HEAD10R LL_I2C_DisableAuto10BitRead
+ * @param I2Cx I2C Instance.
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2C_DisableAuto10BitRead(I2C_TypeDef *I2Cx)
+{
+ SET_BIT(I2Cx->CR2, I2C_CR2_HEAD10R);
+}
+
+/**
+ * @brief Check if automatic RESTART Read request condition for 10bit address header is enabled or disabled.
+ * @rmtoll CR2 HEAD10R LL_I2C_IsEnabledAuto10BitRead
+ * @param I2Cx I2C Instance.
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_I2C_IsEnabledAuto10BitRead(I2C_TypeDef *I2Cx)
+{
+ return ((READ_BIT(I2Cx->CR2, I2C_CR2_HEAD10R) != (I2C_CR2_HEAD10R)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Configure the transfer direction (master mode).
+ * @note Changing these bits when START bit is set is not allowed.
+ * @rmtoll CR2 RD_WRN LL_I2C_SetTransferRequest
+ * @param I2Cx I2C Instance.
+ * @param TransferRequest This parameter can be one of the following values:
+ * @arg @ref LL_I2C_REQUEST_WRITE
+ * @arg @ref LL_I2C_REQUEST_READ
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2C_SetTransferRequest(I2C_TypeDef *I2Cx, uint32_t TransferRequest)
+{
+ MODIFY_REG(I2Cx->CR2, I2C_CR2_RD_WRN, TransferRequest);
+}
+
+/**
+ * @brief Get the transfer direction requested (master mode).
+ * @rmtoll CR2 RD_WRN LL_I2C_GetTransferRequest
+ * @param I2Cx I2C Instance.
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_I2C_REQUEST_WRITE
+ * @arg @ref LL_I2C_REQUEST_READ
+ */
+__STATIC_INLINE uint32_t LL_I2C_GetTransferRequest(I2C_TypeDef *I2Cx)
+{
+ return (uint32_t)(READ_BIT(I2Cx->CR2, I2C_CR2_RD_WRN));
+}
+
+/**
+ * @brief Configure the slave address for transfer (master mode).
+ * @note Changing these bits when START bit is set is not allowed.
+ * @rmtoll CR2 SADD LL_I2C_SetSlaveAddr
+ * @param I2Cx I2C Instance.
+ * @param SlaveAddr This parameter must be a value between Min_Data=0x00 and Max_Data=0x3F.
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2C_SetSlaveAddr(I2C_TypeDef *I2Cx, uint32_t SlaveAddr)
+{
+ MODIFY_REG(I2Cx->CR2, I2C_CR2_SADD, SlaveAddr);
+}
+
+/**
+ * @brief Get the slave address programmed for transfer.
+ * @rmtoll CR2 SADD LL_I2C_GetSlaveAddr
+ * @param I2Cx I2C Instance.
+ * @retval Value between Min_Data=0x0 and Max_Data=0x3F
+ */
+__STATIC_INLINE uint32_t LL_I2C_GetSlaveAddr(I2C_TypeDef *I2Cx)
+{
+ return (uint32_t)(READ_BIT(I2Cx->CR2, I2C_CR2_SADD));
+}
+
+/**
+ * @brief Handles I2Cx communication when starting transfer or during transfer (TC or TCR flag are set).
+ * @rmtoll CR2 SADD LL_I2C_HandleTransfer\n
+ * CR2 ADD10 LL_I2C_HandleTransfer\n
+ * CR2 RD_WRN LL_I2C_HandleTransfer\n
+ * CR2 START LL_I2C_HandleTransfer\n
+ * CR2 STOP LL_I2C_HandleTransfer\n
+ * CR2 RELOAD LL_I2C_HandleTransfer\n
+ * CR2 NBYTES LL_I2C_HandleTransfer\n
+ * CR2 AUTOEND LL_I2C_HandleTransfer\n
+ * CR2 HEAD10R LL_I2C_HandleTransfer
+ * @param I2Cx I2C Instance.
+ * @param SlaveAddr Specifies the slave address to be programmed.
+ * @param SlaveAddrSize This parameter can be one of the following values:
+ * @arg @ref LL_I2C_ADDRSLAVE_7BIT
+ * @arg @ref LL_I2C_ADDRSLAVE_10BIT
+ * @param TransferSize Specifies the number of bytes to be programmed.
+ * This parameter must be a value between Min_Data=0 and Max_Data=255.
+ * @param EndMode This parameter can be one of the following values:
+ * @arg @ref LL_I2C_MODE_RELOAD
+ * @arg @ref LL_I2C_MODE_AUTOEND
+ * @arg @ref LL_I2C_MODE_SOFTEND
+ * @arg @ref LL_I2C_MODE_SMBUS_RELOAD
+ * @arg @ref LL_I2C_MODE_SMBUS_AUTOEND_NO_PEC
+ * @arg @ref LL_I2C_MODE_SMBUS_SOFTEND_NO_PEC
+ * @arg @ref LL_I2C_MODE_SMBUS_AUTOEND_WITH_PEC
+ * @arg @ref LL_I2C_MODE_SMBUS_SOFTEND_WITH_PEC
+ * @param Request This parameter can be one of the following values:
+ * @arg @ref LL_I2C_GENERATE_NOSTARTSTOP
+ * @arg @ref LL_I2C_GENERATE_STOP
+ * @arg @ref LL_I2C_GENERATE_START_READ
+ * @arg @ref LL_I2C_GENERATE_START_WRITE
+ * @arg @ref LL_I2C_GENERATE_RESTART_7BIT_READ
+ * @arg @ref LL_I2C_GENERATE_RESTART_7BIT_WRITE
+ * @arg @ref LL_I2C_GENERATE_RESTART_10BIT_READ
+ * @arg @ref LL_I2C_GENERATE_RESTART_10BIT_WRITE
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2C_HandleTransfer(I2C_TypeDef *I2Cx, uint32_t SlaveAddr, uint32_t SlaveAddrSize,
+ uint32_t TransferSize, uint32_t EndMode, uint32_t Request)
+{
+ MODIFY_REG(I2Cx->CR2, I2C_CR2_SADD | I2C_CR2_ADD10 | (I2C_CR2_RD_WRN & (uint32_t)(Request >> (31U - I2C_CR2_RD_WRN_Pos))) | I2C_CR2_START | I2C_CR2_STOP | I2C_CR2_RELOAD |
+ I2C_CR2_NBYTES | I2C_CR2_AUTOEND | I2C_CR2_HEAD10R,
+ SlaveAddr | SlaveAddrSize | (TransferSize << I2C_CR2_NBYTES_Pos) | EndMode | Request);
+}
+
+/**
+ * @brief Indicate the value of transfer direction (slave mode).
+ * @note RESET: Write transfer, Slave enters in receiver mode.
+ * SET: Read transfer, Slave enters in transmitter mode.
+ * @rmtoll ISR DIR LL_I2C_GetTransferDirection
+ * @param I2Cx I2C Instance.
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_I2C_DIRECTION_WRITE
+ * @arg @ref LL_I2C_DIRECTION_READ
+ */
+__STATIC_INLINE uint32_t LL_I2C_GetTransferDirection(I2C_TypeDef *I2Cx)
+{
+ return (uint32_t)(READ_BIT(I2Cx->ISR, I2C_ISR_DIR));
+}
+
+/**
+ * @brief Return the slave matched address.
+ * @rmtoll ISR ADDCODE LL_I2C_GetAddressMatchCode
+ * @param I2Cx I2C Instance.
+ * @retval Value between Min_Data=0x00 and Max_Data=0x3F
+ */
+__STATIC_INLINE uint32_t LL_I2C_GetAddressMatchCode(I2C_TypeDef *I2Cx)
+{
+ return (uint32_t)(READ_BIT(I2Cx->ISR, I2C_ISR_ADDCODE) >> I2C_ISR_ADDCODE_Pos << 1);
+}
+
+/**
+ * @brief Enable internal comparison of the SMBus Packet Error byte (transmission or reception mode).
+ * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+ * SMBus feature is supported by the I2Cx Instance.
+ * @note This feature is cleared by hardware when the PEC byte is transferred, or when a STOP condition or an Address Matched is received.
+ * This bit has no effect when RELOAD bit is set.
+ * This bit has no effect in device mode when SBC bit is not set.
+ * @rmtoll CR2 PECBYTE LL_I2C_EnableSMBusPECCompare
+ * @param I2Cx I2C Instance.
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2C_EnableSMBusPECCompare(I2C_TypeDef *I2Cx)
+{
+ SET_BIT(I2Cx->CR2, I2C_CR2_PECBYTE);
+}
+
+/**
+ * @brief Check if the SMBus Packet Error byte internal comparison is requested or not.
+ * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+ * SMBus feature is supported by the I2Cx Instance.
+ * @rmtoll CR2 PECBYTE LL_I2C_IsEnabledSMBusPECCompare
+ * @param I2Cx I2C Instance.
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_I2C_IsEnabledSMBusPECCompare(I2C_TypeDef *I2Cx)
+{
+ return ((READ_BIT(I2Cx->CR2, I2C_CR2_PECBYTE) == (I2C_CR2_PECBYTE)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Get the SMBus Packet Error byte calculated.
+ * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+ * SMBus feature is supported by the I2Cx Instance.
+ * @rmtoll PECR PEC LL_I2C_GetSMBusPEC
+ * @param I2Cx I2C Instance.
+ * @retval Value between Min_Data=0x00 and Max_Data=0xFF
+*/
+__STATIC_INLINE uint32_t LL_I2C_GetSMBusPEC(I2C_TypeDef *I2Cx)
+{
+ return (uint32_t)(READ_BIT(I2Cx->PECR, I2C_PECR_PEC));
+}
+
+/**
+ * @brief Read Receive Data register.
+ * @rmtoll RXDR RXDATA LL_I2C_ReceiveData8
+ * @param I2Cx I2C Instance.
+ * @retval Value between Min_Data=0x00 and Max_Data=0xFF
+ */
+__STATIC_INLINE uint8_t LL_I2C_ReceiveData8(I2C_TypeDef *I2Cx)
+{
+ return (uint8_t)(READ_BIT(I2Cx->RXDR, I2C_RXDR_RXDATA));
+}
+
+/**
+ * @brief Write in Transmit Data Register .
+ * @rmtoll TXDR TXDATA LL_I2C_TransmitData8
+ * @param I2Cx I2C Instance.
+ * @param Data Value between Min_Data=0x00 and Max_Data=0xFF
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2C_TransmitData8(I2C_TypeDef *I2Cx, uint8_t Data)
+{
+ WRITE_REG(I2Cx->TXDR, Data);
+}
+
+/**
+ * @}
+ */
+
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup I2C_LL_EF_Init Initialization and de-initialization functions
+ * @{
+ */
+
+ErrorStatus LL_I2C_Init(I2C_TypeDef *I2Cx, LL_I2C_InitTypeDef *I2C_InitStruct);
+ErrorStatus LL_I2C_DeInit(I2C_TypeDef *I2Cx);
+void LL_I2C_StructInit(LL_I2C_InitTypeDef *I2C_InitStruct);
+
+
+/**
+ * @}
+ */
+#endif /* USE_FULL_LL_DRIVER */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* I2C1 || I2C2 */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32F0xx_LL_I2C_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_iwdg.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_iwdg.h
new file mode 100644
index 0000000..6749c15
--- /dev/null
+++ b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_iwdg.h
@@ -0,0 +1,342 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_ll_iwdg.h
+ * @author MCD Application Team
+ * @brief Header file of IWDG LL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32F0xx_LL_IWDG_H
+#define STM32F0xx_LL_IWDG_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx.h"
+
+/** @addtogroup STM32F0xx_LL_Driver
+ * @{
+ */
+
+#if defined(IWDG)
+
+/** @defgroup IWDG_LL IWDG
+ * @{
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup IWDG_LL_Private_Constants IWDG Private Constants
+ * @{
+ */
+#define LL_IWDG_KEY_RELOAD 0x0000AAAAU /*!< IWDG Reload Counter Enable */
+#define LL_IWDG_KEY_ENABLE 0x0000CCCCU /*!< IWDG Peripheral Enable */
+#define LL_IWDG_KEY_WR_ACCESS_ENABLE 0x00005555U /*!< IWDG KR Write Access Enable */
+#define LL_IWDG_KEY_WR_ACCESS_DISABLE 0x00000000U /*!< IWDG KR Write Access Disable */
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup IWDG_LL_Exported_Constants IWDG Exported Constants
+ * @{
+ */
+
+/** @defgroup IWDG_LL_EC_GET_FLAG Get Flags Defines
+ * @brief Flags defines which can be used with LL_IWDG_ReadReg function
+ * @{
+ */
+#define LL_IWDG_SR_PVU IWDG_SR_PVU /*!< Watchdog prescaler value update */
+#define LL_IWDG_SR_RVU IWDG_SR_RVU /*!< Watchdog counter reload value update */
+#define LL_IWDG_SR_WVU IWDG_SR_WVU /*!< Watchdog counter window value update */
+/**
+ * @}
+ */
+
+/** @defgroup IWDG_LL_EC_PRESCALER Prescaler Divider
+ * @{
+ */
+#define LL_IWDG_PRESCALER_4 0x00000000U /*!< Divider by 4 */
+#define LL_IWDG_PRESCALER_8 (IWDG_PR_PR_0) /*!< Divider by 8 */
+#define LL_IWDG_PRESCALER_16 (IWDG_PR_PR_1) /*!< Divider by 16 */
+#define LL_IWDG_PRESCALER_32 (IWDG_PR_PR_1 | IWDG_PR_PR_0) /*!< Divider by 32 */
+#define LL_IWDG_PRESCALER_64 (IWDG_PR_PR_2) /*!< Divider by 64 */
+#define LL_IWDG_PRESCALER_128 (IWDG_PR_PR_2 | IWDG_PR_PR_0) /*!< Divider by 128 */
+#define LL_IWDG_PRESCALER_256 (IWDG_PR_PR_2 | IWDG_PR_PR_1) /*!< Divider by 256 */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup IWDG_LL_Exported_Macros IWDG Exported Macros
+ * @{
+ */
+
+/** @defgroup IWDG_LL_EM_WRITE_READ Common Write and read registers Macros
+ * @{
+ */
+
+/**
+ * @brief Write a value in IWDG register
+ * @param __INSTANCE__ IWDG Instance
+ * @param __REG__ Register to be written
+ * @param __VALUE__ Value to be written in the register
+ * @retval None
+ */
+#define LL_IWDG_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__))
+
+/**
+ * @brief Read a value in IWDG register
+ * @param __INSTANCE__ IWDG Instance
+ * @param __REG__ Register to be read
+ * @retval Register value
+ */
+#define LL_IWDG_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup IWDG_LL_Exported_Functions IWDG Exported Functions
+ * @{
+ */
+/** @defgroup IWDG_LL_EF_Configuration Configuration
+ * @{
+ */
+
+/**
+ * @brief Start the Independent Watchdog
+ * @note Except if the hardware watchdog option is selected
+ * @rmtoll KR KEY LL_IWDG_Enable
+ * @param IWDGx IWDG Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_IWDG_Enable(IWDG_TypeDef *IWDGx)
+{
+ WRITE_REG(IWDGx->KR, LL_IWDG_KEY_ENABLE);
+}
+
+/**
+ * @brief Reloads IWDG counter with value defined in the reload register
+ * @rmtoll KR KEY LL_IWDG_ReloadCounter
+ * @param IWDGx IWDG Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_IWDG_ReloadCounter(IWDG_TypeDef *IWDGx)
+{
+ WRITE_REG(IWDGx->KR, LL_IWDG_KEY_RELOAD);
+}
+
+/**
+ * @brief Enable write access to IWDG_PR, IWDG_RLR and IWDG_WINR registers
+ * @rmtoll KR KEY LL_IWDG_EnableWriteAccess
+ * @param IWDGx IWDG Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_IWDG_EnableWriteAccess(IWDG_TypeDef *IWDGx)
+{
+ WRITE_REG(IWDGx->KR, LL_IWDG_KEY_WR_ACCESS_ENABLE);
+}
+
+/**
+ * @brief Disable write access to IWDG_PR, IWDG_RLR and IWDG_WINR registers
+ * @rmtoll KR KEY LL_IWDG_DisableWriteAccess
+ * @param IWDGx IWDG Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_IWDG_DisableWriteAccess(IWDG_TypeDef *IWDGx)
+{
+ WRITE_REG(IWDGx->KR, LL_IWDG_KEY_WR_ACCESS_DISABLE);
+}
+
+/**
+ * @brief Select the prescaler of the IWDG
+ * @rmtoll PR PR LL_IWDG_SetPrescaler
+ * @param IWDGx IWDG Instance
+ * @param Prescaler This parameter can be one of the following values:
+ * @arg @ref LL_IWDG_PRESCALER_4
+ * @arg @ref LL_IWDG_PRESCALER_8
+ * @arg @ref LL_IWDG_PRESCALER_16
+ * @arg @ref LL_IWDG_PRESCALER_32
+ * @arg @ref LL_IWDG_PRESCALER_64
+ * @arg @ref LL_IWDG_PRESCALER_128
+ * @arg @ref LL_IWDG_PRESCALER_256
+ * @retval None
+ */
+__STATIC_INLINE void LL_IWDG_SetPrescaler(IWDG_TypeDef *IWDGx, uint32_t Prescaler)
+{
+ WRITE_REG(IWDGx->PR, IWDG_PR_PR & Prescaler);
+}
+
+/**
+ * @brief Get the selected prescaler of the IWDG
+ * @rmtoll PR PR LL_IWDG_GetPrescaler
+ * @param IWDGx IWDG Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_IWDG_PRESCALER_4
+ * @arg @ref LL_IWDG_PRESCALER_8
+ * @arg @ref LL_IWDG_PRESCALER_16
+ * @arg @ref LL_IWDG_PRESCALER_32
+ * @arg @ref LL_IWDG_PRESCALER_64
+ * @arg @ref LL_IWDG_PRESCALER_128
+ * @arg @ref LL_IWDG_PRESCALER_256
+ */
+__STATIC_INLINE uint32_t LL_IWDG_GetPrescaler(IWDG_TypeDef *IWDGx)
+{
+ return (READ_REG(IWDGx->PR));
+}
+
+/**
+ * @brief Specify the IWDG down-counter reload value
+ * @rmtoll RLR RL LL_IWDG_SetReloadCounter
+ * @param IWDGx IWDG Instance
+ * @param Counter Value between Min_Data=0 and Max_Data=0x0FFF
+ * @retval None
+ */
+__STATIC_INLINE void LL_IWDG_SetReloadCounter(IWDG_TypeDef *IWDGx, uint32_t Counter)
+{
+ WRITE_REG(IWDGx->RLR, IWDG_RLR_RL & Counter);
+}
+
+/**
+ * @brief Get the specified IWDG down-counter reload value
+ * @rmtoll RLR RL LL_IWDG_GetReloadCounter
+ * @param IWDGx IWDG Instance
+ * @retval Value between Min_Data=0 and Max_Data=0x0FFF
+ */
+__STATIC_INLINE uint32_t LL_IWDG_GetReloadCounter(IWDG_TypeDef *IWDGx)
+{
+ return (READ_REG(IWDGx->RLR));
+}
+
+/**
+ * @brief Specify high limit of the window value to be compared to the down-counter.
+ * @rmtoll WINR WIN LL_IWDG_SetWindow
+ * @param IWDGx IWDG Instance
+ * @param Window Value between Min_Data=0 and Max_Data=0x0FFF
+ * @retval None
+ */
+__STATIC_INLINE void LL_IWDG_SetWindow(IWDG_TypeDef *IWDGx, uint32_t Window)
+{
+ WRITE_REG(IWDGx->WINR, IWDG_WINR_WIN & Window);
+}
+
+/**
+ * @brief Get the high limit of the window value specified.
+ * @rmtoll WINR WIN LL_IWDG_GetWindow
+ * @param IWDGx IWDG Instance
+ * @retval Value between Min_Data=0 and Max_Data=0x0FFF
+ */
+__STATIC_INLINE uint32_t LL_IWDG_GetWindow(IWDG_TypeDef *IWDGx)
+{
+ return (READ_REG(IWDGx->WINR));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup IWDG_LL_EF_FLAG_Management FLAG_Management
+ * @{
+ */
+
+/**
+ * @brief Check if flag Prescaler Value Update is set or not
+ * @rmtoll SR PVU LL_IWDG_IsActiveFlag_PVU
+ * @param IWDGx IWDG Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_IWDG_IsActiveFlag_PVU(IWDG_TypeDef *IWDGx)
+{
+ return ((READ_BIT(IWDGx->SR, IWDG_SR_PVU) == (IWDG_SR_PVU)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Check if flag Reload Value Update is set or not
+ * @rmtoll SR RVU LL_IWDG_IsActiveFlag_RVU
+ * @param IWDGx IWDG Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_IWDG_IsActiveFlag_RVU(IWDG_TypeDef *IWDGx)
+{
+ return ((READ_BIT(IWDGx->SR, IWDG_SR_RVU) == (IWDG_SR_RVU)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Check if flag Window Value Update is set or not
+ * @rmtoll SR WVU LL_IWDG_IsActiveFlag_WVU
+ * @param IWDGx IWDG Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_IWDG_IsActiveFlag_WVU(IWDG_TypeDef *IWDGx)
+{
+ return ((READ_BIT(IWDGx->SR, IWDG_SR_WVU) == (IWDG_SR_WVU)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Check if all flags Prescaler, Reload & Window Value Update are reset or not
+ * @rmtoll SR PVU LL_IWDG_IsReady\n
+ * SR WVU LL_IWDG_IsReady\n
+ * SR RVU LL_IWDG_IsReady
+ * @param IWDGx IWDG Instance
+ * @retval State of bits (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_IWDG_IsReady(IWDG_TypeDef *IWDGx)
+{
+ return ((READ_BIT(IWDGx->SR, IWDG_SR_PVU | IWDG_SR_RVU | IWDG_SR_WVU) == 0U) ? 1UL : 0UL);
+}
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* IWDG */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32F0xx_LL_IWDG_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_pwr.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_pwr.h
new file mode 100644
index 0000000..9a9b423
--- /dev/null
+++ b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_pwr.h
@@ -0,0 +1,552 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_ll_pwr.h
+ * @author MCD Application Team
+ * @brief Header file of PWR LL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_LL_PWR_H
+#define __STM32F0xx_LL_PWR_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx.h"
+
+/** @addtogroup STM32F0xx_LL_Driver
+ * @{
+ */
+
+#if defined(PWR)
+
+/** @defgroup PWR_LL PWR
+ * @{
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup PWR_LL_Exported_Constants PWR Exported Constants
+ * @{
+ */
+
+/** @defgroup PWR_LL_EC_CLEAR_FLAG Clear Flags Defines
+ * @brief Flags defines which can be used with LL_PWR_WriteReg function
+ * @{
+ */
+#define LL_PWR_CR_CSBF PWR_CR_CSBF /*!< Clear standby flag */
+#define LL_PWR_CR_CWUF PWR_CR_CWUF /*!< Clear wakeup flag */
+/**
+ * @}
+ */
+
+/** @defgroup PWR_LL_EC_GET_FLAG Get Flags Defines
+ * @brief Flags defines which can be used with LL_PWR_ReadReg function
+ * @{
+ */
+#define LL_PWR_CSR_WUF PWR_CSR_WUF /*!< Wakeup flag */
+#define LL_PWR_CSR_SBF PWR_CSR_SBF /*!< Standby flag */
+#if defined(PWR_PVD_SUPPORT)
+#define LL_PWR_CSR_PVDO PWR_CSR_PVDO /*!< Power voltage detector output flag */
+#endif /* PWR_PVD_SUPPORT */
+#if defined(PWR_CSR_VREFINTRDYF)
+#define LL_PWR_CSR_VREFINTRDYF PWR_CSR_VREFINTRDYF /*!< VREFINT ready flag */
+#endif /* PWR_CSR_VREFINTRDYF */
+#define LL_PWR_CSR_EWUP1 PWR_CSR_EWUP1 /*!< Enable WKUP pin 1 */
+#define LL_PWR_CSR_EWUP2 PWR_CSR_EWUP2 /*!< Enable WKUP pin 2 */
+#if defined(PWR_CSR_EWUP3)
+#define LL_PWR_CSR_EWUP3 PWR_CSR_EWUP3 /*!< Enable WKUP pin 3 */
+#endif /* PWR_CSR_EWUP3 */
+#if defined(PWR_CSR_EWUP4)
+#define LL_PWR_CSR_EWUP4 PWR_CSR_EWUP4 /*!< Enable WKUP pin 4 */
+#endif /* PWR_CSR_EWUP4 */
+#if defined(PWR_CSR_EWUP5)
+#define LL_PWR_CSR_EWUP5 PWR_CSR_EWUP5 /*!< Enable WKUP pin 5 */
+#endif /* PWR_CSR_EWUP5 */
+#if defined(PWR_CSR_EWUP6)
+#define LL_PWR_CSR_EWUP6 PWR_CSR_EWUP6 /*!< Enable WKUP pin 6 */
+#endif /* PWR_CSR_EWUP6 */
+#if defined(PWR_CSR_EWUP7)
+#define LL_PWR_CSR_EWUP7 PWR_CSR_EWUP7 /*!< Enable WKUP pin 7 */
+#endif /* PWR_CSR_EWUP7 */
+#if defined(PWR_CSR_EWUP8)
+#define LL_PWR_CSR_EWUP8 PWR_CSR_EWUP8 /*!< Enable WKUP pin 8 */
+#endif /* PWR_CSR_EWUP8 */
+/**
+ * @}
+ */
+
+
+/** @defgroup PWR_LL_EC_MODE_PWR Mode Power
+ * @{
+ */
+#define LL_PWR_MODE_STOP_MAINREGU 0x00000000U /*!< Enter Stop mode when the CPU enters deepsleep */
+#define LL_PWR_MODE_STOP_LPREGU (PWR_CR_LPDS) /*!< Enter Stop mode (with low power Regulator ON) when the CPU enters deepsleep */
+#define LL_PWR_MODE_STANDBY (PWR_CR_PDDS) /*!< Enter Standby mode when the CPU enters deepsleep */
+/**
+ * @}
+ */
+
+#if defined(PWR_CR_LPDS)
+/** @defgroup PWR_LL_EC_REGU_MODE_DS_MODE Regulator Mode In Deep Sleep Mode
+ * @{
+ */
+#define LL_PWR_REGU_DSMODE_MAIN 0x00000000U /*!< Voltage Regulator in main mode during deepsleep mode */
+#define LL_PWR_REGU_DSMODE_LOW_POWER (PWR_CR_LPDS) /*!< Voltage Regulator in low-power mode during deepsleep mode */
+/**
+ * @}
+ */
+#endif /* PWR_CR_LPDS */
+
+#if defined(PWR_PVD_SUPPORT)
+/** @defgroup PWR_LL_EC_PVDLEVEL Power Voltage Detector Level
+ * @{
+ */
+#define LL_PWR_PVDLEVEL_0 (PWR_CR_PLS_LEV0) /*!< Voltage threshold 0 */
+#define LL_PWR_PVDLEVEL_1 (PWR_CR_PLS_LEV1) /*!< Voltage threshold 1 */
+#define LL_PWR_PVDLEVEL_2 (PWR_CR_PLS_LEV2) /*!< Voltage threshold 2 */
+#define LL_PWR_PVDLEVEL_3 (PWR_CR_PLS_LEV3) /*!< Voltage threshold 3 */
+#define LL_PWR_PVDLEVEL_4 (PWR_CR_PLS_LEV4) /*!< Voltage threshold 4 */
+#define LL_PWR_PVDLEVEL_5 (PWR_CR_PLS_LEV5) /*!< Voltage threshold 5 */
+#define LL_PWR_PVDLEVEL_6 (PWR_CR_PLS_LEV6) /*!< Voltage threshold 6 */
+#define LL_PWR_PVDLEVEL_7 (PWR_CR_PLS_LEV7) /*!< Voltage threshold 7 */
+/**
+ * @}
+ */
+#endif /* PWR_PVD_SUPPORT */
+/** @defgroup PWR_LL_EC_WAKEUP_PIN Wakeup Pins
+ * @{
+ */
+#define LL_PWR_WAKEUP_PIN1 (PWR_CSR_EWUP1) /*!< WKUP pin 1 : PA0 */
+#define LL_PWR_WAKEUP_PIN2 (PWR_CSR_EWUP2) /*!< WKUP pin 2 : PC13 */
+#if defined(PWR_CSR_EWUP3)
+#define LL_PWR_WAKEUP_PIN3 (PWR_CSR_EWUP3) /*!< WKUP pin 3 : PE6 or PA2 according to device */
+#endif /* PWR_CSR_EWUP3 */
+#if defined(PWR_CSR_EWUP4)
+#define LL_PWR_WAKEUP_PIN4 (PWR_CSR_EWUP4) /*!< WKUP pin 4 : LLG TBD */
+#endif /* PWR_CSR_EWUP4 */
+#if defined(PWR_CSR_EWUP5)
+#define LL_PWR_WAKEUP_PIN5 (PWR_CSR_EWUP5) /*!< WKUP pin 5 : LLG TBD */
+#endif /* PWR_CSR_EWUP5 */
+#if defined(PWR_CSR_EWUP6)
+#define LL_PWR_WAKEUP_PIN6 (PWR_CSR_EWUP6) /*!< WKUP pin 6 : LLG TBD */
+#endif /* PWR_CSR_EWUP6 */
+#if defined(PWR_CSR_EWUP7)
+#define LL_PWR_WAKEUP_PIN7 (PWR_CSR_EWUP7) /*!< WKUP pin 7 : LLG TBD */
+#endif /* PWR_CSR_EWUP7 */
+#if defined(PWR_CSR_EWUP8)
+#define LL_PWR_WAKEUP_PIN8 (PWR_CSR_EWUP8) /*!< WKUP pin 8 : LLG TBD */
+#endif /* PWR_CSR_EWUP8 */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup PWR_LL_Exported_Macros PWR Exported Macros
+ * @{
+ */
+
+/** @defgroup PWR_LL_EM_WRITE_READ Common write and read registers Macros
+ * @{
+ */
+
+/**
+ * @brief Write a value in PWR register
+ * @param __REG__ Register to be written
+ * @param __VALUE__ Value to be written in the register
+ * @retval None
+ */
+#define LL_PWR_WriteReg(__REG__, __VALUE__) WRITE_REG(PWR->__REG__, (__VALUE__))
+
+/**
+ * @brief Read a value in PWR register
+ * @param __REG__ Register to be read
+ * @retval Register value
+ */
+#define LL_PWR_ReadReg(__REG__) READ_REG(PWR->__REG__)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup PWR_LL_Exported_Functions PWR Exported Functions
+ * @{
+ */
+
+/** @defgroup PWR_LL_EF_Configuration Configuration
+ * @{
+ */
+
+/**
+ * @brief Enable access to the backup domain
+ * @rmtoll CR DBP LL_PWR_EnableBkUpAccess
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_EnableBkUpAccess(void)
+{
+ SET_BIT(PWR->CR, PWR_CR_DBP);
+}
+
+/**
+ * @brief Disable access to the backup domain
+ * @rmtoll CR DBP LL_PWR_DisableBkUpAccess
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_DisableBkUpAccess(void)
+{
+ CLEAR_BIT(PWR->CR, PWR_CR_DBP);
+}
+
+/**
+ * @brief Check if the backup domain is enabled
+ * @rmtoll CR DBP LL_PWR_IsEnabledBkUpAccess
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_PWR_IsEnabledBkUpAccess(void)
+{
+ return (READ_BIT(PWR->CR, PWR_CR_DBP) == (PWR_CR_DBP));
+}
+
+#if defined(PWR_CR_LPDS)
+/**
+ * @brief Set voltage Regulator mode during deep sleep mode
+ * @rmtoll CR LPDS LL_PWR_SetRegulModeDS
+ * @param RegulMode This parameter can be one of the following values:
+ * @arg @ref LL_PWR_REGU_DSMODE_MAIN
+ * @arg @ref LL_PWR_REGU_DSMODE_LOW_POWER
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_SetRegulModeDS(uint32_t RegulMode)
+{
+ MODIFY_REG(PWR->CR, PWR_CR_LPDS, RegulMode);
+}
+
+/**
+ * @brief Get voltage Regulator mode during deep sleep mode
+ * @rmtoll CR LPDS LL_PWR_GetRegulModeDS
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_PWR_REGU_DSMODE_MAIN
+ * @arg @ref LL_PWR_REGU_DSMODE_LOW_POWER
+ */
+__STATIC_INLINE uint32_t LL_PWR_GetRegulModeDS(void)
+{
+ return (uint32_t)(READ_BIT(PWR->CR, PWR_CR_LPDS));
+}
+#endif /* PWR_CR_LPDS */
+
+/**
+ * @brief Set Power Down mode when CPU enters deepsleep
+ * @rmtoll CR PDDS LL_PWR_SetPowerMode\n
+ * @rmtoll CR LPDS LL_PWR_SetPowerMode
+ * @param PDMode This parameter can be one of the following values:
+ * @arg @ref LL_PWR_MODE_STOP_MAINREGU
+ * @arg @ref LL_PWR_MODE_STOP_LPREGU
+ * @arg @ref LL_PWR_MODE_STANDBY
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_SetPowerMode(uint32_t PDMode)
+{
+ MODIFY_REG(PWR->CR, (PWR_CR_PDDS| PWR_CR_LPDS), PDMode);
+}
+
+/**
+ * @brief Get Power Down mode when CPU enters deepsleep
+ * @rmtoll CR PDDS LL_PWR_GetPowerMode\n
+ * @rmtoll CR LPDS LL_PWR_GetPowerMode
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_PWR_MODE_STOP_MAINREGU
+ * @arg @ref LL_PWR_MODE_STOP_LPREGU
+ * @arg @ref LL_PWR_MODE_STANDBY
+ */
+__STATIC_INLINE uint32_t LL_PWR_GetPowerMode(void)
+{
+ return (uint32_t)(READ_BIT(PWR->CR, (PWR_CR_PDDS| PWR_CR_LPDS)));
+}
+
+#if defined(PWR_PVD_SUPPORT)
+/**
+ * @brief Configure the voltage threshold detected by the Power Voltage Detector
+ * @rmtoll CR PLS LL_PWR_SetPVDLevel
+ * @param PVDLevel This parameter can be one of the following values:
+ * @arg @ref LL_PWR_PVDLEVEL_0
+ * @arg @ref LL_PWR_PVDLEVEL_1
+ * @arg @ref LL_PWR_PVDLEVEL_2
+ * @arg @ref LL_PWR_PVDLEVEL_3
+ * @arg @ref LL_PWR_PVDLEVEL_4
+ * @arg @ref LL_PWR_PVDLEVEL_5
+ * @arg @ref LL_PWR_PVDLEVEL_6
+ * @arg @ref LL_PWR_PVDLEVEL_7
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_SetPVDLevel(uint32_t PVDLevel)
+{
+ MODIFY_REG(PWR->CR, PWR_CR_PLS, PVDLevel);
+}
+
+/**
+ * @brief Get the voltage threshold detection
+ * @rmtoll CR PLS LL_PWR_GetPVDLevel
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_PWR_PVDLEVEL_0
+ * @arg @ref LL_PWR_PVDLEVEL_1
+ * @arg @ref LL_PWR_PVDLEVEL_2
+ * @arg @ref LL_PWR_PVDLEVEL_3
+ * @arg @ref LL_PWR_PVDLEVEL_4
+ * @arg @ref LL_PWR_PVDLEVEL_5
+ * @arg @ref LL_PWR_PVDLEVEL_6
+ * @arg @ref LL_PWR_PVDLEVEL_7
+ */
+__STATIC_INLINE uint32_t LL_PWR_GetPVDLevel(void)
+{
+ return (uint32_t)(READ_BIT(PWR->CR, PWR_CR_PLS));
+}
+
+/**
+ * @brief Enable Power Voltage Detector
+ * @rmtoll CR PVDE LL_PWR_EnablePVD
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_EnablePVD(void)
+{
+ SET_BIT(PWR->CR, PWR_CR_PVDE);
+}
+
+/**
+ * @brief Disable Power Voltage Detector
+ * @rmtoll CR PVDE LL_PWR_DisablePVD
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_DisablePVD(void)
+{
+ CLEAR_BIT(PWR->CR, PWR_CR_PVDE);
+}
+
+/**
+ * @brief Check if Power Voltage Detector is enabled
+ * @rmtoll CR PVDE LL_PWR_IsEnabledPVD
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_PWR_IsEnabledPVD(void)
+{
+ return (READ_BIT(PWR->CR, PWR_CR_PVDE) == (PWR_CR_PVDE));
+}
+#endif /* PWR_PVD_SUPPORT */
+
+/**
+ * @brief Enable the WakeUp PINx functionality
+ * @rmtoll CSR EWUP1 LL_PWR_EnableWakeUpPin\n
+ * @rmtoll CSR EWUP2 LL_PWR_EnableWakeUpPin\n
+ * @rmtoll CSR EWUP3 LL_PWR_EnableWakeUpPin\n
+ * @rmtoll CSR EWUP4 LL_PWR_EnableWakeUpPin\n
+ * @rmtoll CSR EWUP5 LL_PWR_EnableWakeUpPin\n
+ * @rmtoll CSR EWUP6 LL_PWR_EnableWakeUpPin\n
+ * @rmtoll CSR EWUP7 LL_PWR_EnableWakeUpPin\n
+ * @rmtoll CSR EWUP8 LL_PWR_EnableWakeUpPin
+ * @param WakeUpPin This parameter can be one of the following values:
+ * @arg @ref LL_PWR_WAKEUP_PIN1
+ * @arg @ref LL_PWR_WAKEUP_PIN2
+ * @arg @ref LL_PWR_WAKEUP_PIN3 (*)
+ * @arg @ref LL_PWR_WAKEUP_PIN4 (*)
+ * @arg @ref LL_PWR_WAKEUP_PIN5 (*)
+ * @arg @ref LL_PWR_WAKEUP_PIN6 (*)
+ * @arg @ref LL_PWR_WAKEUP_PIN7 (*)
+ * @arg @ref LL_PWR_WAKEUP_PIN8 (*)
+ *
+ * (*) not available on all devices
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_EnableWakeUpPin(uint32_t WakeUpPin)
+{
+ SET_BIT(PWR->CSR, WakeUpPin);
+}
+
+/**
+ * @brief Disable the WakeUp PINx functionality
+ * @rmtoll CSR EWUP1 LL_PWR_DisableWakeUpPin\n
+ * @rmtoll CSR EWUP2 LL_PWR_DisableWakeUpPin\n
+ * @rmtoll CSR EWUP3 LL_PWR_DisableWakeUpPin\n
+ * @rmtoll CSR EWUP4 LL_PWR_DisableWakeUpPin\n
+ * @rmtoll CSR EWUP5 LL_PWR_DisableWakeUpPin\n
+ * @rmtoll CSR EWUP6 LL_PWR_DisableWakeUpPin\n
+ * @rmtoll CSR EWUP7 LL_PWR_DisableWakeUpPin\n
+ * @rmtoll CSR EWUP8 LL_PWR_DisableWakeUpPin
+ * @param WakeUpPin This parameter can be one of the following values:
+ * @arg @ref LL_PWR_WAKEUP_PIN1
+ * @arg @ref LL_PWR_WAKEUP_PIN2
+ * @arg @ref LL_PWR_WAKEUP_PIN3 (*)
+ * @arg @ref LL_PWR_WAKEUP_PIN4 (*)
+ * @arg @ref LL_PWR_WAKEUP_PIN5 (*)
+ * @arg @ref LL_PWR_WAKEUP_PIN6 (*)
+ * @arg @ref LL_PWR_WAKEUP_PIN7 (*)
+ * @arg @ref LL_PWR_WAKEUP_PIN8 (*)
+ *
+ * (*) not available on all devices
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_DisableWakeUpPin(uint32_t WakeUpPin)
+{
+ CLEAR_BIT(PWR->CSR, WakeUpPin);
+}
+
+/**
+ * @brief Check if the WakeUp PINx functionality is enabled
+ * @rmtoll CSR EWUP1 LL_PWR_IsEnabledWakeUpPin\n
+ * @rmtoll CSR EWUP2 LL_PWR_IsEnabledWakeUpPin\n
+ * @rmtoll CSR EWUP3 LL_PWR_IsEnabledWakeUpPin\n
+ * @rmtoll CSR EWUP4 LL_PWR_IsEnabledWakeUpPin\n
+ * @rmtoll CSR EWUP5 LL_PWR_IsEnabledWakeUpPin\n
+ * @rmtoll CSR EWUP6 LL_PWR_IsEnabledWakeUpPin\n
+ * @rmtoll CSR EWUP7 LL_PWR_IsEnabledWakeUpPin\n
+ * @rmtoll CSR EWUP8 LL_PWR_IsEnabledWakeUpPin
+ * @param WakeUpPin This parameter can be one of the following values:
+ * @arg @ref LL_PWR_WAKEUP_PIN1
+ * @arg @ref LL_PWR_WAKEUP_PIN2
+ * @arg @ref LL_PWR_WAKEUP_PIN3 (*)
+ * @arg @ref LL_PWR_WAKEUP_PIN4 (*)
+ * @arg @ref LL_PWR_WAKEUP_PIN5 (*)
+ * @arg @ref LL_PWR_WAKEUP_PIN6 (*)
+ * @arg @ref LL_PWR_WAKEUP_PIN7 (*)
+ * @arg @ref LL_PWR_WAKEUP_PIN8 (*)
+ *
+ * (*) not available on all devices
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_PWR_IsEnabledWakeUpPin(uint32_t WakeUpPin)
+{
+ return (READ_BIT(PWR->CSR, WakeUpPin) == (WakeUpPin));
+}
+
+
+/**
+ * @}
+ */
+
+/** @defgroup PWR_LL_EF_FLAG_Management FLAG_Management
+ * @{
+ */
+
+/**
+ * @brief Get Wake-up Flag
+ * @rmtoll CSR WUF LL_PWR_IsActiveFlag_WU
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU(void)
+{
+ return (READ_BIT(PWR->CSR, PWR_CSR_WUF) == (PWR_CSR_WUF));
+}
+
+/**
+ * @brief Get Standby Flag
+ * @rmtoll CSR SBF LL_PWR_IsActiveFlag_SB
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_SB(void)
+{
+ return (READ_BIT(PWR->CSR, PWR_CSR_SBF) == (PWR_CSR_SBF));
+}
+
+#if defined(PWR_PVD_SUPPORT)
+/**
+ * @brief Indicate whether VDD voltage is below the selected PVD threshold
+ * @rmtoll CSR PVDO LL_PWR_IsActiveFlag_PVDO
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_PVDO(void)
+{
+ return (READ_BIT(PWR->CSR, PWR_CSR_PVDO) == (PWR_CSR_PVDO));
+}
+#endif /* PWR_PVD_SUPPORT */
+
+#if defined(PWR_CSR_VREFINTRDYF)
+/**
+ * @brief Get Internal Reference VrefInt Flag
+ * @rmtoll CSR VREFINTRDYF LL_PWR_IsActiveFlag_VREFINTRDY
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_VREFINTRDY(void)
+{
+ return (READ_BIT(PWR->CSR, PWR_CSR_VREFINTRDYF) == (PWR_CSR_VREFINTRDYF));
+}
+#endif /* PWR_CSR_VREFINTRDYF */
+/**
+ * @brief Clear Standby Flag
+ * @rmtoll CR CSBF LL_PWR_ClearFlag_SB
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_ClearFlag_SB(void)
+{
+ SET_BIT(PWR->CR, PWR_CR_CSBF);
+}
+
+/**
+ * @brief Clear Wake-up Flags
+ * @rmtoll CR CWUF LL_PWR_ClearFlag_WU
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_ClearFlag_WU(void)
+{
+ SET_BIT(PWR->CR, PWR_CR_CWUF);
+}
+
+/**
+ * @}
+ */
+
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup PWR_LL_EF_Init De-initialization function
+ * @{
+ */
+ErrorStatus LL_PWR_DeInit(void);
+/**
+ * @}
+ */
+#endif /* USE_FULL_LL_DRIVER */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* defined(PWR) */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_LL_PWR_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_rcc.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_rcc.h
new file mode 100644
index 0000000..626b273
--- /dev/null
+++ b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_rcc.h
@@ -0,0 +1,2261 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_ll_rcc.h
+ * @author MCD Application Team
+ * @brief Header file of RCC LL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_LL_RCC_H
+#define __STM32F0xx_LL_RCC_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx.h"
+
+/** @addtogroup STM32F0xx_LL_Driver
+ * @{
+ */
+
+#if defined(RCC)
+
+/** @defgroup RCC_LL RCC
+ * @{
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup RCC_LL_Private_Constants RCC Private Constants
+ * @{
+ */
+/* Defines used for the bit position in the register and perform offsets*/
+#define RCC_POSITION_HPRE (uint32_t)4U /*!< field position in register RCC_CFGR */
+#define RCC_POSITION_PPRE1 (uint32_t)8U /*!< field position in register RCC_CFGR */
+#define RCC_POSITION_PLLMUL (uint32_t)18U /*!< field position in register RCC_CFGR */
+#define RCC_POSITION_HSICAL (uint32_t)8U /*!< field position in register RCC_CR */
+#define RCC_POSITION_HSITRIM (uint32_t)3U /*!< field position in register RCC_CR */
+#define RCC_POSITION_HSI14TRIM (uint32_t)3U /*!< field position in register RCC_CR2 */
+#define RCC_POSITION_HSI14CAL (uint32_t)8U /*!< field position in register RCC_CR2 */
+#if defined(RCC_HSI48_SUPPORT)
+#define RCC_POSITION_HSI48CAL (uint32_t)24U /*!< field position in register RCC_CR2 */
+#endif /* RCC_HSI48_SUPPORT */
+#define RCC_POSITION_USART1SW (uint32_t)0U /*!< field position in register RCC_CFGR3 */
+#define RCC_POSITION_USART2SW (uint32_t)16U /*!< field position in register RCC_CFGR3 */
+#define RCC_POSITION_USART3SW (uint32_t)18U /*!< field position in register RCC_CFGR3 */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup RCC_LL_Private_Macros RCC Private Macros
+ * @{
+ */
+/**
+ * @}
+ */
+#endif /*USE_FULL_LL_DRIVER*/
+/* Exported types ------------------------------------------------------------*/
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup RCC_LL_Exported_Types RCC Exported Types
+ * @{
+ */
+
+/** @defgroup LL_ES_CLOCK_FREQ Clocks Frequency Structure
+ * @{
+ */
+
+/**
+ * @brief RCC Clocks Frequency Structure
+ */
+typedef struct
+{
+ uint32_t SYSCLK_Frequency; /*!< SYSCLK clock frequency */
+ uint32_t HCLK_Frequency; /*!< HCLK clock frequency */
+ uint32_t PCLK1_Frequency; /*!< PCLK1 clock frequency */
+} LL_RCC_ClocksTypeDef;
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* USE_FULL_LL_DRIVER */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup RCC_LL_Exported_Constants RCC Exported Constants
+ * @{
+ */
+
+/** @defgroup RCC_LL_EC_OSC_VALUES Oscillator Values adaptation
+ * @brief Defines used to adapt values of different oscillators
+ * @note These values could be modified in the user environment according to
+ * HW set-up.
+ * @{
+ */
+#if !defined (HSE_VALUE)
+#define HSE_VALUE 8000000U /*!< Value of the HSE oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined (HSI_VALUE)
+#define HSI_VALUE 8000000U /*!< Value of the HSI oscillator in Hz */
+#endif /* HSI_VALUE */
+
+#if !defined (LSE_VALUE)
+#define LSE_VALUE 32768U /*!< Value of the LSE oscillator in Hz */
+#endif /* LSE_VALUE */
+
+#if !defined (LSI_VALUE)
+#define LSI_VALUE 32000U /*!< Value of the LSI oscillator in Hz */
+#endif /* LSI_VALUE */
+#if defined(RCC_HSI48_SUPPORT)
+
+#if !defined (HSI48_VALUE)
+#define HSI48_VALUE 48000000U /*!< Value of the HSI48 oscillator in Hz */
+#endif /* HSI48_VALUE */
+#endif /* RCC_HSI48_SUPPORT */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_CLEAR_FLAG Clear Flags Defines
+ * @brief Flags defines which can be used with LL_RCC_WriteReg function
+ * @{
+ */
+#define LL_RCC_CIR_LSIRDYC RCC_CIR_LSIRDYC /*!< LSI Ready Interrupt Clear */
+#define LL_RCC_CIR_LSERDYC RCC_CIR_LSERDYC /*!< LSE Ready Interrupt Clear */
+#define LL_RCC_CIR_HSIRDYC RCC_CIR_HSIRDYC /*!< HSI Ready Interrupt Clear */
+#define LL_RCC_CIR_HSERDYC RCC_CIR_HSERDYC /*!< HSE Ready Interrupt Clear */
+#define LL_RCC_CIR_PLLRDYC RCC_CIR_PLLRDYC /*!< PLL Ready Interrupt Clear */
+#define LL_RCC_CIR_HSI14RDYC RCC_CIR_HSI14RDYC /*!< HSI14 Ready Interrupt Clear */
+#if defined(RCC_HSI48_SUPPORT)
+#define LL_RCC_CIR_HSI48RDYC RCC_CIR_HSI48RDYC /*!< HSI48 Ready Interrupt Clear */
+#endif /* RCC_HSI48_SUPPORT */
+#define LL_RCC_CIR_CSSC RCC_CIR_CSSC /*!< Clock Security System Interrupt Clear */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_GET_FLAG Get Flags Defines
+ * @brief Flags defines which can be used with LL_RCC_ReadReg function
+ * @{
+ */
+#define LL_RCC_CIR_LSIRDYF RCC_CIR_LSIRDYF /*!< LSI Ready Interrupt flag */
+#define LL_RCC_CIR_LSERDYF RCC_CIR_LSERDYF /*!< LSE Ready Interrupt flag */
+#define LL_RCC_CIR_HSIRDYF RCC_CIR_HSIRDYF /*!< HSI Ready Interrupt flag */
+#define LL_RCC_CIR_HSERDYF RCC_CIR_HSERDYF /*!< HSE Ready Interrupt flag */
+#define LL_RCC_CIR_PLLRDYF RCC_CIR_PLLRDYF /*!< PLL Ready Interrupt flag */
+#define LL_RCC_CIR_HSI14RDYF RCC_CIR_HSI14RDYF /*!< HSI14 Ready Interrupt flag */
+#if defined(RCC_HSI48_SUPPORT)
+#define LL_RCC_CIR_HSI48RDYF RCC_CIR_HSI48RDYF /*!< HSI48 Ready Interrupt flag */
+#endif /* RCC_HSI48_SUPPORT */
+#define LL_RCC_CIR_CSSF RCC_CIR_CSSF /*!< Clock Security System Interrupt flag */
+#define LL_RCC_CSR_OBLRSTF RCC_CSR_OBLRSTF /*!< OBL reset flag */
+#define LL_RCC_CSR_PINRSTF RCC_CSR_PINRSTF /*!< PIN reset flag */
+#define LL_RCC_CSR_PORRSTF RCC_CSR_PORRSTF /*!< POR/PDR reset flag */
+#define LL_RCC_CSR_SFTRSTF RCC_CSR_SFTRSTF /*!< Software Reset flag */
+#define LL_RCC_CSR_IWDGRSTF RCC_CSR_IWDGRSTF /*!< Independent Watchdog reset flag */
+#define LL_RCC_CSR_WWDGRSTF RCC_CSR_WWDGRSTF /*!< Window watchdog reset flag */
+#define LL_RCC_CSR_LPWRRSTF RCC_CSR_LPWRRSTF /*!< Low-Power reset flag */
+#if defined(RCC_CSR_V18PWRRSTF)
+#define LL_RCC_CSR_V18PWRRSTF RCC_CSR_V18PWRRSTF /*!< Reset flag of the 1.8 V domain. */
+#endif /* RCC_CSR_V18PWRRSTF */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_IT IT Defines
+ * @brief IT defines which can be used with LL_RCC_ReadReg and LL_RCC_WriteReg functions
+ * @{
+ */
+#define LL_RCC_CIR_LSIRDYIE RCC_CIR_LSIRDYIE /*!< LSI Ready Interrupt Enable */
+#define LL_RCC_CIR_LSERDYIE RCC_CIR_LSERDYIE /*!< LSE Ready Interrupt Enable */
+#define LL_RCC_CIR_HSIRDYIE RCC_CIR_HSIRDYIE /*!< HSI Ready Interrupt Enable */
+#define LL_RCC_CIR_HSERDYIE RCC_CIR_HSERDYIE /*!< HSE Ready Interrupt Enable */
+#define LL_RCC_CIR_PLLRDYIE RCC_CIR_PLLRDYIE /*!< PLL Ready Interrupt Enable */
+#define LL_RCC_CIR_HSI14RDYIE RCC_CIR_HSI14RDYIE /*!< HSI14 Ready Interrupt Enable */
+#if defined(RCC_HSI48_SUPPORT)
+#define LL_RCC_CIR_HSI48RDYIE RCC_CIR_HSI48RDYIE /*!< HSI48 Ready Interrupt Enable */
+#endif /* RCC_HSI48_SUPPORT */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_LSEDRIVE LSE oscillator drive capability
+ * @{
+ */
+#define LL_RCC_LSEDRIVE_LOW ((uint32_t)0x00000000U) /*!< Xtal mode lower driving capability */
+#define LL_RCC_LSEDRIVE_MEDIUMLOW RCC_BDCR_LSEDRV_1 /*!< Xtal mode medium low driving capability */
+#define LL_RCC_LSEDRIVE_MEDIUMHIGH RCC_BDCR_LSEDRV_0 /*!< Xtal mode medium high driving capability */
+#define LL_RCC_LSEDRIVE_HIGH RCC_BDCR_LSEDRV /*!< Xtal mode higher driving capability */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_SYS_CLKSOURCE System clock switch
+ * @{
+ */
+#define LL_RCC_SYS_CLKSOURCE_HSI RCC_CFGR_SW_HSI /*!< HSI selection as system clock */
+#define LL_RCC_SYS_CLKSOURCE_HSE RCC_CFGR_SW_HSE /*!< HSE selection as system clock */
+#define LL_RCC_SYS_CLKSOURCE_PLL RCC_CFGR_SW_PLL /*!< PLL selection as system clock */
+#if defined(RCC_CFGR_SW_HSI48)
+#define LL_RCC_SYS_CLKSOURCE_HSI48 RCC_CFGR_SW_HSI48 /*!< HSI48 selection as system clock */
+#endif /* RCC_CFGR_SW_HSI48 */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_SYS_CLKSOURCE_STATUS System clock switch status
+ * @{
+ */
+#define LL_RCC_SYS_CLKSOURCE_STATUS_HSI RCC_CFGR_SWS_HSI /*!< HSI used as system clock */
+#define LL_RCC_SYS_CLKSOURCE_STATUS_HSE RCC_CFGR_SWS_HSE /*!< HSE used as system clock */
+#define LL_RCC_SYS_CLKSOURCE_STATUS_PLL RCC_CFGR_SWS_PLL /*!< PLL used as system clock */
+#if defined(RCC_CFGR_SWS_HSI48)
+#define LL_RCC_SYS_CLKSOURCE_STATUS_HSI48 RCC_CFGR_SWS_HSI48 /*!< HSI48 used as system clock */
+#endif /* RCC_CFGR_SWS_HSI48 */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_SYSCLK_DIV AHB prescaler
+ * @{
+ */
+#define LL_RCC_SYSCLK_DIV_1 RCC_CFGR_HPRE_DIV1 /*!< SYSCLK not divided */
+#define LL_RCC_SYSCLK_DIV_2 RCC_CFGR_HPRE_DIV2 /*!< SYSCLK divided by 2 */
+#define LL_RCC_SYSCLK_DIV_4 RCC_CFGR_HPRE_DIV4 /*!< SYSCLK divided by 4 */
+#define LL_RCC_SYSCLK_DIV_8 RCC_CFGR_HPRE_DIV8 /*!< SYSCLK divided by 8 */
+#define LL_RCC_SYSCLK_DIV_16 RCC_CFGR_HPRE_DIV16 /*!< SYSCLK divided by 16 */
+#define LL_RCC_SYSCLK_DIV_64 RCC_CFGR_HPRE_DIV64 /*!< SYSCLK divided by 64 */
+#define LL_RCC_SYSCLK_DIV_128 RCC_CFGR_HPRE_DIV128 /*!< SYSCLK divided by 128 */
+#define LL_RCC_SYSCLK_DIV_256 RCC_CFGR_HPRE_DIV256 /*!< SYSCLK divided by 256 */
+#define LL_RCC_SYSCLK_DIV_512 RCC_CFGR_HPRE_DIV512 /*!< SYSCLK divided by 512 */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_APB1_DIV APB low-speed prescaler (APB1)
+ * @{
+ */
+#define LL_RCC_APB1_DIV_1 RCC_CFGR_PPRE_DIV1 /*!< HCLK not divided */
+#define LL_RCC_APB1_DIV_2 RCC_CFGR_PPRE_DIV2 /*!< HCLK divided by 2 */
+#define LL_RCC_APB1_DIV_4 RCC_CFGR_PPRE_DIV4 /*!< HCLK divided by 4 */
+#define LL_RCC_APB1_DIV_8 RCC_CFGR_PPRE_DIV8 /*!< HCLK divided by 8 */
+#define LL_RCC_APB1_DIV_16 RCC_CFGR_PPRE_DIV16 /*!< HCLK divided by 16 */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_MCO1SOURCE MCO1 SOURCE selection
+ * @{
+ */
+#define LL_RCC_MCO1SOURCE_NOCLOCK RCC_CFGR_MCOSEL_NOCLOCK /*!< MCO output disabled, no clock on MCO */
+#define LL_RCC_MCO1SOURCE_HSI14 RCC_CFGR_MCOSEL_HSI14 /*!< HSI14 oscillator clock selected */
+#define LL_RCC_MCO1SOURCE_SYSCLK RCC_CFGR_MCOSEL_SYSCLK /*!< SYSCLK selection as MCO source */
+#define LL_RCC_MCO1SOURCE_HSI RCC_CFGR_MCOSEL_HSI /*!< HSI selection as MCO source */
+#define LL_RCC_MCO1SOURCE_HSE RCC_CFGR_MCOSEL_HSE /*!< HSE selection as MCO source */
+#define LL_RCC_MCO1SOURCE_LSI RCC_CFGR_MCOSEL_LSI /*!< LSI selection as MCO source */
+#define LL_RCC_MCO1SOURCE_LSE RCC_CFGR_MCOSEL_LSE /*!< LSE selection as MCO source */
+#if defined(RCC_CFGR_MCOSEL_HSI48)
+#define LL_RCC_MCO1SOURCE_HSI48 RCC_CFGR_MCOSEL_HSI48 /*!< HSI48 selection as MCO source */
+#endif /* RCC_CFGR_MCOSEL_HSI48 */
+#define LL_RCC_MCO1SOURCE_PLLCLK_DIV_2 RCC_CFGR_MCOSEL_PLL_DIV2 /*!< PLL clock divided by 2*/
+#if defined(RCC_CFGR_PLLNODIV)
+#define LL_RCC_MCO1SOURCE_PLLCLK (RCC_CFGR_MCOSEL_PLL_DIV2 | RCC_CFGR_PLLNODIV) /*!< PLL clock selected*/
+#endif /* RCC_CFGR_PLLNODIV */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_MCO1_DIV MCO1 prescaler
+ * @{
+ */
+#define LL_RCC_MCO1_DIV_1 ((uint32_t)0x00000000U)/*!< MCO Clock divided by 1 */
+#if defined(RCC_CFGR_MCOPRE)
+#define LL_RCC_MCO1_DIV_2 RCC_CFGR_MCOPRE_DIV2 /*!< MCO Clock divided by 2 */
+#define LL_RCC_MCO1_DIV_4 RCC_CFGR_MCOPRE_DIV4 /*!< MCO Clock divided by 4 */
+#define LL_RCC_MCO1_DIV_8 RCC_CFGR_MCOPRE_DIV8 /*!< MCO Clock divided by 8 */
+#define LL_RCC_MCO1_DIV_16 RCC_CFGR_MCOPRE_DIV16 /*!< MCO Clock divided by 16 */
+#define LL_RCC_MCO1_DIV_32 RCC_CFGR_MCOPRE_DIV32 /*!< MCO Clock divided by 32 */
+#define LL_RCC_MCO1_DIV_64 RCC_CFGR_MCOPRE_DIV64 /*!< MCO Clock divided by 64 */
+#define LL_RCC_MCO1_DIV_128 RCC_CFGR_MCOPRE_DIV128 /*!< MCO Clock divided by 128 */
+#endif /* RCC_CFGR_MCOPRE */
+/**
+ * @}
+ */
+
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup RCC_LL_EC_PERIPH_FREQUENCY Peripheral clock frequency
+ * @{
+ */
+#define LL_RCC_PERIPH_FREQUENCY_NO 0x00000000U /*!< No clock enabled for the peripheral */
+#define LL_RCC_PERIPH_FREQUENCY_NA 0xFFFFFFFFU /*!< Frequency cannot be provided as external clock */
+/**
+ * @}
+ */
+#endif /* USE_FULL_LL_DRIVER */
+
+/** @defgroup RCC_LL_EC_USART1_CLKSOURCE Peripheral USART clock source selection
+ * @{
+ */
+#define LL_RCC_USART1_CLKSOURCE_PCLK1 (uint32_t)((RCC_POSITION_USART1SW << 24) | RCC_CFGR3_USART1SW_PCLK) /*!< PCLK1 clock used as USART1 clock source */
+#define LL_RCC_USART1_CLKSOURCE_SYSCLK (uint32_t)((RCC_POSITION_USART1SW << 24) | RCC_CFGR3_USART1SW_SYSCLK) /*!< System clock selected as USART1 clock source */
+#define LL_RCC_USART1_CLKSOURCE_LSE (uint32_t)((RCC_POSITION_USART1SW << 24) | RCC_CFGR3_USART1SW_LSE) /*!< LSE oscillator clock used as USART1 clock source */
+#define LL_RCC_USART1_CLKSOURCE_HSI (uint32_t)((RCC_POSITION_USART1SW << 24) | RCC_CFGR3_USART1SW_HSI) /*!< HSI oscillator clock used as USART1 clock source */
+#if defined(RCC_CFGR3_USART2SW)
+#define LL_RCC_USART2_CLKSOURCE_PCLK1 (uint32_t)((RCC_POSITION_USART2SW << 24) | RCC_CFGR3_USART2SW_PCLK) /*!< PCLK1 clock used as USART2 clock source */
+#define LL_RCC_USART2_CLKSOURCE_SYSCLK (uint32_t)((RCC_POSITION_USART2SW << 24) | RCC_CFGR3_USART2SW_SYSCLK) /*!< System clock selected as USART2 clock source */
+#define LL_RCC_USART2_CLKSOURCE_LSE (uint32_t)((RCC_POSITION_USART2SW << 24) | RCC_CFGR3_USART2SW_LSE) /*!< LSE oscillator clock used as USART2 clock source */
+#define LL_RCC_USART2_CLKSOURCE_HSI (uint32_t)((RCC_POSITION_USART2SW << 24) | RCC_CFGR3_USART2SW_HSI) /*!< HSI oscillator clock used as USART2 clock source */
+#endif /* RCC_CFGR3_USART2SW */
+#if defined(RCC_CFGR3_USART3SW)
+#define LL_RCC_USART3_CLKSOURCE_PCLK1 (uint32_t)((RCC_POSITION_USART3SW << 24) | RCC_CFGR3_USART3SW_PCLK) /*!< PCLK1 clock used as USART3 clock source */
+#define LL_RCC_USART3_CLKSOURCE_SYSCLK (uint32_t)((RCC_POSITION_USART3SW << 24) | RCC_CFGR3_USART3SW_SYSCLK) /*!< System clock selected as USART3 clock source */
+#define LL_RCC_USART3_CLKSOURCE_LSE (uint32_t)((RCC_POSITION_USART3SW << 24) | RCC_CFGR3_USART3SW_LSE) /*!< LSE oscillator clock used as USART3 clock source */
+#define LL_RCC_USART3_CLKSOURCE_HSI (uint32_t)((RCC_POSITION_USART3SW << 24) | RCC_CFGR3_USART3SW_HSI) /*!< HSI oscillator clock used as USART3 clock source */
+#endif /* RCC_CFGR3_USART3SW */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_I2C1_CLKSOURCE Peripheral I2C clock source selection
+ * @{
+ */
+#define LL_RCC_I2C1_CLKSOURCE_HSI RCC_CFGR3_I2C1SW_HSI /*!< HSI oscillator clock used as I2C1 clock source */
+#define LL_RCC_I2C1_CLKSOURCE_SYSCLK RCC_CFGR3_I2C1SW_SYSCLK /*!< System clock selected as I2C1 clock source */
+/**
+ * @}
+ */
+
+#if defined(CEC)
+/** @defgroup RCC_LL_EC_CEC_CLKSOURCE Peripheral CEC clock source selection
+ * @{
+ */
+#define LL_RCC_CEC_CLKSOURCE_HSI_DIV244 RCC_CFGR3_CECSW_HSI_DIV244 /*!< HSI clock divided by 244 selected as HDMI CEC entry clock source */
+#define LL_RCC_CEC_CLKSOURCE_LSE RCC_CFGR3_CECSW_LSE /*!< LSE clock selected as HDMI CEC entry clock source */
+/**
+ * @}
+ */
+
+#endif /* CEC */
+
+#if defined(USB)
+/** @defgroup RCC_LL_EC_USB_CLKSOURCE Peripheral USB clock source selection
+ * @{
+ */
+#if defined(RCC_CFGR3_USBSW_HSI48)
+#define LL_RCC_USB_CLKSOURCE_HSI48 RCC_CFGR3_USBSW_HSI48 /*!< HSI48 oscillator clock used as USB clock source */
+#else
+#define LL_RCC_USB_CLKSOURCE_NONE ((uint32_t)0x00000000) /*!< USB Clock disabled */
+#endif /*RCC_CFGR3_USBSW_HSI48*/
+#define LL_RCC_USB_CLKSOURCE_PLL RCC_CFGR3_USBSW_PLLCLK /*!< PLL selected as USB clock source */
+/**
+ * @}
+ */
+
+#endif /* USB */
+
+/** @defgroup RCC_LL_EC_USART1 Peripheral USART get clock source
+ * @{
+ */
+#define LL_RCC_USART1_CLKSOURCE RCC_POSITION_USART1SW /*!< USART1 Clock source selection */
+#if defined(RCC_CFGR3_USART2SW)
+#define LL_RCC_USART2_CLKSOURCE RCC_POSITION_USART2SW /*!< USART2 Clock source selection */
+#endif /* RCC_CFGR3_USART2SW */
+#if defined(RCC_CFGR3_USART3SW)
+#define LL_RCC_USART3_CLKSOURCE RCC_POSITION_USART3SW /*!< USART3 Clock source selection */
+#endif /* RCC_CFGR3_USART3SW */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_I2C1 Peripheral I2C get clock source
+ * @{
+ */
+#define LL_RCC_I2C1_CLKSOURCE RCC_CFGR3_I2C1SW /*!< I2C1 Clock source selection */
+/**
+ * @}
+ */
+
+#if defined(CEC)
+/** @defgroup RCC_LL_EC_CEC Peripheral CEC get clock source
+ * @{
+ */
+#define LL_RCC_CEC_CLKSOURCE RCC_CFGR3_CECSW /*!< CEC Clock source selection */
+/**
+ * @}
+ */
+#endif /* CEC */
+
+#if defined(USB)
+/** @defgroup RCC_LL_EC_USB Peripheral USB get clock source
+ * @{
+ */
+#define LL_RCC_USB_CLKSOURCE RCC_CFGR3_USBSW /*!< USB Clock source selection */
+/**
+ * @}
+ */
+#endif /* USB */
+
+/** @defgroup RCC_LL_EC_RTC_CLKSOURCE RTC clock source selection
+ * @{
+ */
+#define LL_RCC_RTC_CLKSOURCE_NONE 0x00000000U /*!< No clock used as RTC clock */
+#define LL_RCC_RTC_CLKSOURCE_LSE RCC_BDCR_RTCSEL_0 /*!< LSE oscillator clock used as RTC clock */
+#define LL_RCC_RTC_CLKSOURCE_LSI RCC_BDCR_RTCSEL_1 /*!< LSI oscillator clock used as RTC clock */
+#define LL_RCC_RTC_CLKSOURCE_HSE_DIV32 RCC_BDCR_RTCSEL /*!< HSE oscillator clock divided by 32 used as RTC clock */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_PLL_MUL PLL Multiplicator factor
+ * @{
+ */
+#define LL_RCC_PLL_MUL_2 RCC_CFGR_PLLMUL2 /*!< PLL input clock*2 */
+#define LL_RCC_PLL_MUL_3 RCC_CFGR_PLLMUL3 /*!< PLL input clock*3 */
+#define LL_RCC_PLL_MUL_4 RCC_CFGR_PLLMUL4 /*!< PLL input clock*4 */
+#define LL_RCC_PLL_MUL_5 RCC_CFGR_PLLMUL5 /*!< PLL input clock*5 */
+#define LL_RCC_PLL_MUL_6 RCC_CFGR_PLLMUL6 /*!< PLL input clock*6 */
+#define LL_RCC_PLL_MUL_7 RCC_CFGR_PLLMUL7 /*!< PLL input clock*7 */
+#define LL_RCC_PLL_MUL_8 RCC_CFGR_PLLMUL8 /*!< PLL input clock*8 */
+#define LL_RCC_PLL_MUL_9 RCC_CFGR_PLLMUL9 /*!< PLL input clock*9 */
+#define LL_RCC_PLL_MUL_10 RCC_CFGR_PLLMUL10 /*!< PLL input clock*10 */
+#define LL_RCC_PLL_MUL_11 RCC_CFGR_PLLMUL11 /*!< PLL input clock*11 */
+#define LL_RCC_PLL_MUL_12 RCC_CFGR_PLLMUL12 /*!< PLL input clock*12 */
+#define LL_RCC_PLL_MUL_13 RCC_CFGR_PLLMUL13 /*!< PLL input clock*13 */
+#define LL_RCC_PLL_MUL_14 RCC_CFGR_PLLMUL14 /*!< PLL input clock*14 */
+#define LL_RCC_PLL_MUL_15 RCC_CFGR_PLLMUL15 /*!< PLL input clock*15 */
+#define LL_RCC_PLL_MUL_16 RCC_CFGR_PLLMUL16 /*!< PLL input clock*16 */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_PLLSOURCE PLL SOURCE
+ * @{
+ */
+#define LL_RCC_PLLSOURCE_NONE 0x00000000U /*!< No clock selected as main PLL entry clock source */
+#define LL_RCC_PLLSOURCE_HSE RCC_CFGR_PLLSRC_HSE_PREDIV /*!< HSE/PREDIV clock selected as PLL entry clock source */
+#if defined(RCC_PLLSRC_PREDIV1_SUPPORT)
+#define LL_RCC_PLLSOURCE_HSI RCC_CFGR_PLLSRC_HSI_PREDIV /*!< HSI/PREDIV clock selected as PLL entry clock source */
+#if defined(RCC_CFGR_SW_HSI48)
+#define LL_RCC_PLLSOURCE_HSI48 RCC_CFGR_PLLSRC_HSI48_PREDIV /*!< HSI48/PREDIV clock selected as PLL entry clock source */
+#endif /* RCC_CFGR_SW_HSI48 */
+#else
+#define LL_RCC_PLLSOURCE_HSI_DIV_2 RCC_CFGR_PLLSRC_HSI_DIV2 /*!< HSI clock divided by 2 selected as PLL entry clock source */
+#define LL_RCC_PLLSOURCE_HSE_DIV_1 (RCC_CFGR_PLLSRC_HSE_PREDIV | RCC_CFGR2_PREDIV_DIV1) /*!< HSE clock selected as PLL entry clock source */
+#define LL_RCC_PLLSOURCE_HSE_DIV_2 (RCC_CFGR_PLLSRC_HSE_PREDIV | RCC_CFGR2_PREDIV_DIV2) /*!< HSE/2 clock selected as PLL entry clock source */
+#define LL_RCC_PLLSOURCE_HSE_DIV_3 (RCC_CFGR_PLLSRC_HSE_PREDIV | RCC_CFGR2_PREDIV_DIV3) /*!< HSE/3 clock selected as PLL entry clock source */
+#define LL_RCC_PLLSOURCE_HSE_DIV_4 (RCC_CFGR_PLLSRC_HSE_PREDIV | RCC_CFGR2_PREDIV_DIV4) /*!< HSE/4 clock selected as PLL entry clock source */
+#define LL_RCC_PLLSOURCE_HSE_DIV_5 (RCC_CFGR_PLLSRC_HSE_PREDIV | RCC_CFGR2_PREDIV_DIV5) /*!< HSE/5 clock selected as PLL entry clock source */
+#define LL_RCC_PLLSOURCE_HSE_DIV_6 (RCC_CFGR_PLLSRC_HSE_PREDIV | RCC_CFGR2_PREDIV_DIV6) /*!< HSE/6 clock selected as PLL entry clock source */
+#define LL_RCC_PLLSOURCE_HSE_DIV_7 (RCC_CFGR_PLLSRC_HSE_PREDIV | RCC_CFGR2_PREDIV_DIV7) /*!< HSE/7 clock selected as PLL entry clock source */
+#define LL_RCC_PLLSOURCE_HSE_DIV_8 (RCC_CFGR_PLLSRC_HSE_PREDIV | RCC_CFGR2_PREDIV_DIV8) /*!< HSE/8 clock selected as PLL entry clock source */
+#define LL_RCC_PLLSOURCE_HSE_DIV_9 (RCC_CFGR_PLLSRC_HSE_PREDIV | RCC_CFGR2_PREDIV_DIV9) /*!< HSE/9 clock selected as PLL entry clock source */
+#define LL_RCC_PLLSOURCE_HSE_DIV_10 (RCC_CFGR_PLLSRC_HSE_PREDIV | RCC_CFGR2_PREDIV_DIV10) /*!< HSE/10 clock selected as PLL entry clock source */
+#define LL_RCC_PLLSOURCE_HSE_DIV_11 (RCC_CFGR_PLLSRC_HSE_PREDIV | RCC_CFGR2_PREDIV_DIV11) /*!< HSE/11 clock selected as PLL entry clock source */
+#define LL_RCC_PLLSOURCE_HSE_DIV_12 (RCC_CFGR_PLLSRC_HSE_PREDIV | RCC_CFGR2_PREDIV_DIV12) /*!< HSE/12 clock selected as PLL entry clock source */
+#define LL_RCC_PLLSOURCE_HSE_DIV_13 (RCC_CFGR_PLLSRC_HSE_PREDIV | RCC_CFGR2_PREDIV_DIV13) /*!< HSE/13 clock selected as PLL entry clock source */
+#define LL_RCC_PLLSOURCE_HSE_DIV_14 (RCC_CFGR_PLLSRC_HSE_PREDIV | RCC_CFGR2_PREDIV_DIV14) /*!< HSE/14 clock selected as PLL entry clock source */
+#define LL_RCC_PLLSOURCE_HSE_DIV_15 (RCC_CFGR_PLLSRC_HSE_PREDIV | RCC_CFGR2_PREDIV_DIV15) /*!< HSE/15 clock selected as PLL entry clock source */
+#define LL_RCC_PLLSOURCE_HSE_DIV_16 (RCC_CFGR_PLLSRC_HSE_PREDIV | RCC_CFGR2_PREDIV_DIV16) /*!< HSE/16 clock selected as PLL entry clock source */
+#endif /* RCC_PLLSRC_PREDIV1_SUPPORT */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_PREDIV_DIV PREDIV Division factor
+ * @{
+ */
+#define LL_RCC_PREDIV_DIV_1 RCC_CFGR2_PREDIV_DIV1 /*!< PREDIV input clock not divided */
+#define LL_RCC_PREDIV_DIV_2 RCC_CFGR2_PREDIV_DIV2 /*!< PREDIV input clock divided by 2 */
+#define LL_RCC_PREDIV_DIV_3 RCC_CFGR2_PREDIV_DIV3 /*!< PREDIV input clock divided by 3 */
+#define LL_RCC_PREDIV_DIV_4 RCC_CFGR2_PREDIV_DIV4 /*!< PREDIV input clock divided by 4 */
+#define LL_RCC_PREDIV_DIV_5 RCC_CFGR2_PREDIV_DIV5 /*!< PREDIV input clock divided by 5 */
+#define LL_RCC_PREDIV_DIV_6 RCC_CFGR2_PREDIV_DIV6 /*!< PREDIV input clock divided by 6 */
+#define LL_RCC_PREDIV_DIV_7 RCC_CFGR2_PREDIV_DIV7 /*!< PREDIV input clock divided by 7 */
+#define LL_RCC_PREDIV_DIV_8 RCC_CFGR2_PREDIV_DIV8 /*!< PREDIV input clock divided by 8 */
+#define LL_RCC_PREDIV_DIV_9 RCC_CFGR2_PREDIV_DIV9 /*!< PREDIV input clock divided by 9 */
+#define LL_RCC_PREDIV_DIV_10 RCC_CFGR2_PREDIV_DIV10 /*!< PREDIV input clock divided by 10 */
+#define LL_RCC_PREDIV_DIV_11 RCC_CFGR2_PREDIV_DIV11 /*!< PREDIV input clock divided by 11 */
+#define LL_RCC_PREDIV_DIV_12 RCC_CFGR2_PREDIV_DIV12 /*!< PREDIV input clock divided by 12 */
+#define LL_RCC_PREDIV_DIV_13 RCC_CFGR2_PREDIV_DIV13 /*!< PREDIV input clock divided by 13 */
+#define LL_RCC_PREDIV_DIV_14 RCC_CFGR2_PREDIV_DIV14 /*!< PREDIV input clock divided by 14 */
+#define LL_RCC_PREDIV_DIV_15 RCC_CFGR2_PREDIV_DIV15 /*!< PREDIV input clock divided by 15 */
+#define LL_RCC_PREDIV_DIV_16 RCC_CFGR2_PREDIV_DIV16 /*!< PREDIV input clock divided by 16 */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup RCC_LL_Exported_Macros RCC Exported Macros
+ * @{
+ */
+
+/** @defgroup RCC_LL_EM_WRITE_READ Common Write and read registers Macros
+ * @{
+ */
+
+/**
+ * @brief Write a value in RCC register
+ * @param __REG__ Register to be written
+ * @param __VALUE__ Value to be written in the register
+ * @retval None
+ */
+#define LL_RCC_WriteReg(__REG__, __VALUE__) WRITE_REG(RCC->__REG__, (__VALUE__))
+
+/**
+ * @brief Read a value in RCC register
+ * @param __REG__ Register to be read
+ * @retval Register value
+ */
+#define LL_RCC_ReadReg(__REG__) READ_REG(RCC->__REG__)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EM_CALC_FREQ Calculate frequencies
+ * @{
+ */
+
+#if defined(RCC_PLLSRC_PREDIV1_SUPPORT)
+/**
+ * @brief Helper macro to calculate the PLLCLK frequency
+ * @note ex: @ref __LL_RCC_CALC_PLLCLK_FREQ (HSE_VALUE, @ref LL_RCC_PLL_GetMultiplicator()
+ * , @ref LL_RCC_PLL_GetPrediv());
+ * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI/HSI48)
+ * @param __PLLMUL__ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLL_MUL_2
+ * @arg @ref LL_RCC_PLL_MUL_3
+ * @arg @ref LL_RCC_PLL_MUL_4
+ * @arg @ref LL_RCC_PLL_MUL_5
+ * @arg @ref LL_RCC_PLL_MUL_6
+ * @arg @ref LL_RCC_PLL_MUL_7
+ * @arg @ref LL_RCC_PLL_MUL_8
+ * @arg @ref LL_RCC_PLL_MUL_9
+ * @arg @ref LL_RCC_PLL_MUL_10
+ * @arg @ref LL_RCC_PLL_MUL_11
+ * @arg @ref LL_RCC_PLL_MUL_12
+ * @arg @ref LL_RCC_PLL_MUL_13
+ * @arg @ref LL_RCC_PLL_MUL_14
+ * @arg @ref LL_RCC_PLL_MUL_15
+ * @arg @ref LL_RCC_PLL_MUL_16
+ * @param __PLLPREDIV__ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PREDIV_DIV_1
+ * @arg @ref LL_RCC_PREDIV_DIV_2
+ * @arg @ref LL_RCC_PREDIV_DIV_3
+ * @arg @ref LL_RCC_PREDIV_DIV_4
+ * @arg @ref LL_RCC_PREDIV_DIV_5
+ * @arg @ref LL_RCC_PREDIV_DIV_6
+ * @arg @ref LL_RCC_PREDIV_DIV_7
+ * @arg @ref LL_RCC_PREDIV_DIV_8
+ * @arg @ref LL_RCC_PREDIV_DIV_9
+ * @arg @ref LL_RCC_PREDIV_DIV_10
+ * @arg @ref LL_RCC_PREDIV_DIV_11
+ * @arg @ref LL_RCC_PREDIV_DIV_12
+ * @arg @ref LL_RCC_PREDIV_DIV_13
+ * @arg @ref LL_RCC_PREDIV_DIV_14
+ * @arg @ref LL_RCC_PREDIV_DIV_15
+ * @arg @ref LL_RCC_PREDIV_DIV_16
+ * @retval PLL clock frequency (in Hz)
+ */
+#define __LL_RCC_CALC_PLLCLK_FREQ(__INPUTFREQ__, __PLLMUL__, __PLLPREDIV__) \
+ (((__INPUTFREQ__) / ((((__PLLPREDIV__) & RCC_CFGR2_PREDIV) + 1U))) * ((((__PLLMUL__) & RCC_CFGR_PLLMUL) >> RCC_POSITION_PLLMUL) + 2U))
+
+#else
+/**
+ * @brief Helper macro to calculate the PLLCLK frequency
+ * @note ex: @ref __LL_RCC_CALC_PLLCLK_FREQ (HSE_VALUE / (@ref LL_RCC_PLL_GetPrediv () + 1), @ref LL_RCC_PLL_GetMultiplicator());
+ * @param __INPUTFREQ__ PLL Input frequency (based on HSE div Prediv / HSI div 2)
+ * @param __PLLMUL__ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLL_MUL_2
+ * @arg @ref LL_RCC_PLL_MUL_3
+ * @arg @ref LL_RCC_PLL_MUL_4
+ * @arg @ref LL_RCC_PLL_MUL_5
+ * @arg @ref LL_RCC_PLL_MUL_6
+ * @arg @ref LL_RCC_PLL_MUL_7
+ * @arg @ref LL_RCC_PLL_MUL_8
+ * @arg @ref LL_RCC_PLL_MUL_9
+ * @arg @ref LL_RCC_PLL_MUL_10
+ * @arg @ref LL_RCC_PLL_MUL_11
+ * @arg @ref LL_RCC_PLL_MUL_12
+ * @arg @ref LL_RCC_PLL_MUL_13
+ * @arg @ref LL_RCC_PLL_MUL_14
+ * @arg @ref LL_RCC_PLL_MUL_15
+ * @arg @ref LL_RCC_PLL_MUL_16
+ * @retval PLL clock frequency (in Hz)
+ */
+#define __LL_RCC_CALC_PLLCLK_FREQ(__INPUTFREQ__, __PLLMUL__) \
+ ((__INPUTFREQ__) * ((((__PLLMUL__) & RCC_CFGR_PLLMUL) >> RCC_POSITION_PLLMUL) + 2U))
+#endif /* RCC_PLLSRC_PREDIV1_SUPPORT */
+/**
+ * @brief Helper macro to calculate the HCLK frequency
+ * @note: __AHBPRESCALER__ be retrieved by @ref LL_RCC_GetAHBPrescaler
+ * ex: __LL_RCC_CALC_HCLK_FREQ(LL_RCC_GetAHBPrescaler())
+ * @param __SYSCLKFREQ__ SYSCLK frequency (based on HSE/HSI/PLLCLK)
+ * @param __AHBPRESCALER__ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_SYSCLK_DIV_1
+ * @arg @ref LL_RCC_SYSCLK_DIV_2
+ * @arg @ref LL_RCC_SYSCLK_DIV_4
+ * @arg @ref LL_RCC_SYSCLK_DIV_8
+ * @arg @ref LL_RCC_SYSCLK_DIV_16
+ * @arg @ref LL_RCC_SYSCLK_DIV_64
+ * @arg @ref LL_RCC_SYSCLK_DIV_128
+ * @arg @ref LL_RCC_SYSCLK_DIV_256
+ * @arg @ref LL_RCC_SYSCLK_DIV_512
+ * @retval HCLK clock frequency (in Hz)
+ */
+#define __LL_RCC_CALC_HCLK_FREQ(__SYSCLKFREQ__, __AHBPRESCALER__) ((__SYSCLKFREQ__) >> AHBPrescTable[((__AHBPRESCALER__) & RCC_CFGR_HPRE) >> RCC_CFGR_HPRE_Pos])
+
+/**
+ * @brief Helper macro to calculate the PCLK1 frequency (ABP1)
+ * @note: __APB1PRESCALER__ be retrieved by @ref LL_RCC_GetAPB1Prescaler
+ * ex: __LL_RCC_CALC_PCLK1_FREQ(LL_RCC_GetAPB1Prescaler())
+ * @param __HCLKFREQ__ HCLK frequency
+ * @param __APB1PRESCALER__ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_APB1_DIV_1
+ * @arg @ref LL_RCC_APB1_DIV_2
+ * @arg @ref LL_RCC_APB1_DIV_4
+ * @arg @ref LL_RCC_APB1_DIV_8
+ * @arg @ref LL_RCC_APB1_DIV_16
+ * @retval PCLK1 clock frequency (in Hz)
+ */
+#define __LL_RCC_CALC_PCLK1_FREQ(__HCLKFREQ__, __APB1PRESCALER__) ((__HCLKFREQ__) >> APBPrescTable[(__APB1PRESCALER__) >> RCC_CFGR_PPRE_Pos])
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup RCC_LL_Exported_Functions RCC Exported Functions
+ * @{
+ */
+
+/** @defgroup RCC_LL_EF_HSE HSE
+ * @{
+ */
+
+/**
+ * @brief Enable the Clock Security System.
+ * @rmtoll CR CSSON LL_RCC_HSE_EnableCSS
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_HSE_EnableCSS(void)
+{
+ SET_BIT(RCC->CR, RCC_CR_CSSON);
+}
+
+/**
+ * @brief Disable the Clock Security System.
+ * @note Cannot be disabled in HSE is ready (only by hardware)
+ * @rmtoll CR CSSON LL_RCC_HSE_DisableCSS
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_HSE_DisableCSS(void)
+{
+ CLEAR_BIT(RCC->CR, RCC_CR_CSSON);
+}
+
+/**
+ * @brief Enable HSE external oscillator (HSE Bypass)
+ * @rmtoll CR HSEBYP LL_RCC_HSE_EnableBypass
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_HSE_EnableBypass(void)
+{
+ SET_BIT(RCC->CR, RCC_CR_HSEBYP);
+}
+
+/**
+ * @brief Disable HSE external oscillator (HSE Bypass)
+ * @rmtoll CR HSEBYP LL_RCC_HSE_DisableBypass
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_HSE_DisableBypass(void)
+{
+ CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP);
+}
+
+/**
+ * @brief Enable HSE crystal oscillator (HSE ON)
+ * @rmtoll CR HSEON LL_RCC_HSE_Enable
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_HSE_Enable(void)
+{
+ SET_BIT(RCC->CR, RCC_CR_HSEON);
+}
+
+/**
+ * @brief Disable HSE crystal oscillator (HSE ON)
+ * @rmtoll CR HSEON LL_RCC_HSE_Disable
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_HSE_Disable(void)
+{
+ CLEAR_BIT(RCC->CR, RCC_CR_HSEON);
+}
+
+/**
+ * @brief Check if HSE oscillator Ready
+ * @rmtoll CR HSERDY LL_RCC_HSE_IsReady
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_HSE_IsReady(void)
+{
+ return (READ_BIT(RCC->CR, RCC_CR_HSERDY) == (RCC_CR_HSERDY));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EF_HSI HSI
+ * @{
+ */
+
+/**
+ * @brief Enable HSI oscillator
+ * @rmtoll CR HSION LL_RCC_HSI_Enable
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_HSI_Enable(void)
+{
+ SET_BIT(RCC->CR, RCC_CR_HSION);
+}
+
+/**
+ * @brief Disable HSI oscillator
+ * @rmtoll CR HSION LL_RCC_HSI_Disable
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_HSI_Disable(void)
+{
+ CLEAR_BIT(RCC->CR, RCC_CR_HSION);
+}
+
+/**
+ * @brief Check if HSI clock is ready
+ * @rmtoll CR HSIRDY LL_RCC_HSI_IsReady
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_HSI_IsReady(void)
+{
+ return (READ_BIT(RCC->CR, RCC_CR_HSIRDY) == (RCC_CR_HSIRDY));
+}
+
+/**
+ * @brief Get HSI Calibration value
+ * @note When HSITRIM is written, HSICAL is updated with the sum of
+ * HSITRIM and the factory trim value
+ * @rmtoll CR HSICAL LL_RCC_HSI_GetCalibration
+ * @retval Between Min_Data = 0x00 and Max_Data = 0xFF
+ */
+__STATIC_INLINE uint32_t LL_RCC_HSI_GetCalibration(void)
+{
+ return (uint32_t)(READ_BIT(RCC->CR, RCC_CR_HSICAL) >> RCC_CR_HSICAL_Pos);
+}
+
+/**
+ * @brief Set HSI Calibration trimming
+ * @note user-programmable trimming value that is added to the HSICAL
+ * @note Default value is 16, which, when added to the HSICAL value,
+ * should trim the HSI to 16 MHz +/- 1 %
+ * @rmtoll CR HSITRIM LL_RCC_HSI_SetCalibTrimming
+ * @param Value between Min_Data = 0x00 and Max_Data = 0x1F
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_HSI_SetCalibTrimming(uint32_t Value)
+{
+ MODIFY_REG(RCC->CR, RCC_CR_HSITRIM, Value << RCC_CR_HSITRIM_Pos);
+}
+
+/**
+ * @brief Get HSI Calibration trimming
+ * @rmtoll CR HSITRIM LL_RCC_HSI_GetCalibTrimming
+ * @retval Between Min_Data = 0x00 and Max_Data = 0x1F
+ */
+__STATIC_INLINE uint32_t LL_RCC_HSI_GetCalibTrimming(void)
+{
+ return (uint32_t)(READ_BIT(RCC->CR, RCC_CR_HSITRIM) >> RCC_CR_HSITRIM_Pos);
+}
+
+/**
+ * @}
+ */
+
+#if defined(RCC_HSI48_SUPPORT)
+/** @defgroup RCC_LL_EF_HSI48 HSI48
+ * @{
+ */
+
+/**
+ * @brief Enable HSI48
+ * @rmtoll CR2 HSI48ON LL_RCC_HSI48_Enable
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_HSI48_Enable(void)
+{
+ SET_BIT(RCC->CR2, RCC_CR2_HSI48ON);
+}
+
+/**
+ * @brief Disable HSI48
+ * @rmtoll CR2 HSI48ON LL_RCC_HSI48_Disable
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_HSI48_Disable(void)
+{
+ CLEAR_BIT(RCC->CR2, RCC_CR2_HSI48ON);
+}
+
+/**
+ * @brief Check if HSI48 oscillator Ready
+ * @rmtoll CR2 HSI48RDY LL_RCC_HSI48_IsReady
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_HSI48_IsReady(void)
+{
+ return (READ_BIT(RCC->CR2, RCC_CR2_HSI48RDY) == (RCC_CR2_HSI48RDY));
+}
+
+/**
+ * @brief Get HSI48 Calibration value
+ * @rmtoll CR2 HSI48CAL LL_RCC_HSI48_GetCalibration
+ * @retval Between Min_Data = 0x00 and Max_Data = 0xFF
+ */
+__STATIC_INLINE uint32_t LL_RCC_HSI48_GetCalibration(void)
+{
+ return (uint32_t)(READ_BIT(RCC->CR2, RCC_CR2_HSI48CAL) >> RCC_POSITION_HSI48CAL);
+}
+
+/**
+ * @}
+ */
+
+#endif /* RCC_HSI48_SUPPORT */
+
+/** @defgroup RCC_LL_EF_HSI14 HSI14
+ * @{
+ */
+
+/**
+ * @brief Enable HSI14
+ * @rmtoll CR2 HSI14ON LL_RCC_HSI14_Enable
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_HSI14_Enable(void)
+{
+ SET_BIT(RCC->CR2, RCC_CR2_HSI14ON);
+}
+
+/**
+ * @brief Disable HSI14
+ * @rmtoll CR2 HSI14ON LL_RCC_HSI14_Disable
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_HSI14_Disable(void)
+{
+ CLEAR_BIT(RCC->CR2, RCC_CR2_HSI14ON);
+}
+
+/**
+ * @brief Check if HSI14 oscillator Ready
+ * @rmtoll CR2 HSI14RDY LL_RCC_HSI14_IsReady
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_HSI14_IsReady(void)
+{
+ return (READ_BIT(RCC->CR2, RCC_CR2_HSI14RDY) == (RCC_CR2_HSI14RDY));
+}
+
+/**
+ * @brief ADC interface can turn on the HSI14 oscillator
+ * @rmtoll CR2 HSI14DIS LL_RCC_HSI14_EnableADCControl
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_HSI14_EnableADCControl(void)
+{
+ CLEAR_BIT(RCC->CR2, RCC_CR2_HSI14DIS);
+}
+
+/**
+ * @brief ADC interface can not turn on the HSI14 oscillator
+ * @rmtoll CR2 HSI14DIS LL_RCC_HSI14_DisableADCControl
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_HSI14_DisableADCControl(void)
+{
+ SET_BIT(RCC->CR2, RCC_CR2_HSI14DIS);
+}
+
+/**
+ * @brief Set HSI14 Calibration trimming
+ * @note user-programmable trimming value that is added to the HSI14CAL
+ * @note Default value is 16, which, when added to the HSI14CAL value,
+ * should trim the HSI14 to 14 MHz +/- 1 %
+ * @rmtoll CR2 HSI14TRIM LL_RCC_HSI14_SetCalibTrimming
+ * @param Value between Min_Data = 0x00 and Max_Data = 0xFF
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_HSI14_SetCalibTrimming(uint32_t Value)
+{
+ MODIFY_REG(RCC->CR2, RCC_CR2_HSI14TRIM, Value << RCC_POSITION_HSI14TRIM);
+}
+
+/**
+ * @brief Get HSI14 Calibration value
+ * @note When HSI14TRIM is written, HSI14CAL is updated with the sum of
+ * HSI14TRIM and the factory trim value
+ * @rmtoll CR2 HSI14TRIM LL_RCC_HSI14_GetCalibTrimming
+ * @retval Between Min_Data = 0x00 and Max_Data = 0x1F
+ */
+__STATIC_INLINE uint32_t LL_RCC_HSI14_GetCalibTrimming(void)
+{
+ return (uint32_t)(READ_BIT(RCC->CR2, RCC_CR2_HSI14TRIM) >> RCC_POSITION_HSI14TRIM);
+}
+
+/**
+ * @brief Get HSI14 Calibration trimming
+ * @rmtoll CR2 HSI14CAL LL_RCC_HSI14_GetCalibration
+ * @retval Between Min_Data = 0x00 and Max_Data = 0x1F
+ */
+__STATIC_INLINE uint32_t LL_RCC_HSI14_GetCalibration(void)
+{
+ return (uint32_t)(READ_BIT(RCC->CR2, RCC_CR2_HSI14CAL) >> RCC_POSITION_HSI14CAL);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EF_LSE LSE
+ * @{
+ */
+
+/**
+ * @brief Enable Low Speed External (LSE) crystal.
+ * @rmtoll BDCR LSEON LL_RCC_LSE_Enable
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_LSE_Enable(void)
+{
+ SET_BIT(RCC->BDCR, RCC_BDCR_LSEON);
+}
+
+/**
+ * @brief Disable Low Speed External (LSE) crystal.
+ * @rmtoll BDCR LSEON LL_RCC_LSE_Disable
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_LSE_Disable(void)
+{
+ CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON);
+}
+
+/**
+ * @brief Enable external clock source (LSE bypass).
+ * @rmtoll BDCR LSEBYP LL_RCC_LSE_EnableBypass
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_LSE_EnableBypass(void)
+{
+ SET_BIT(RCC->BDCR, RCC_BDCR_LSEBYP);
+}
+
+/**
+ * @brief Disable external clock source (LSE bypass).
+ * @rmtoll BDCR LSEBYP LL_RCC_LSE_DisableBypass
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_LSE_DisableBypass(void)
+{
+ CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP);
+}
+
+/**
+ * @brief Set LSE oscillator drive capability
+ * @note The oscillator is in Xtal mode when it is not in bypass mode.
+ * @rmtoll BDCR LSEDRV LL_RCC_LSE_SetDriveCapability
+ * @param LSEDrive This parameter can be one of the following values:
+ * @arg @ref LL_RCC_LSEDRIVE_LOW
+ * @arg @ref LL_RCC_LSEDRIVE_MEDIUMLOW
+ * @arg @ref LL_RCC_LSEDRIVE_MEDIUMHIGH
+ * @arg @ref LL_RCC_LSEDRIVE_HIGH
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_LSE_SetDriveCapability(uint32_t LSEDrive)
+{
+ MODIFY_REG(RCC->BDCR, RCC_BDCR_LSEDRV, LSEDrive);
+}
+
+/**
+ * @brief Get LSE oscillator drive capability
+ * @rmtoll BDCR LSEDRV LL_RCC_LSE_GetDriveCapability
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_LSEDRIVE_LOW
+ * @arg @ref LL_RCC_LSEDRIVE_MEDIUMLOW
+ * @arg @ref LL_RCC_LSEDRIVE_MEDIUMHIGH
+ * @arg @ref LL_RCC_LSEDRIVE_HIGH
+ */
+__STATIC_INLINE uint32_t LL_RCC_LSE_GetDriveCapability(void)
+{
+ return (uint32_t)(READ_BIT(RCC->BDCR, RCC_BDCR_LSEDRV));
+}
+
+/**
+ * @brief Check if LSE oscillator Ready
+ * @rmtoll BDCR LSERDY LL_RCC_LSE_IsReady
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_LSE_IsReady(void)
+{
+ return (READ_BIT(RCC->BDCR, RCC_BDCR_LSERDY) == (RCC_BDCR_LSERDY));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EF_LSI LSI
+ * @{
+ */
+
+/**
+ * @brief Enable LSI Oscillator
+ * @rmtoll CSR LSION LL_RCC_LSI_Enable
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_LSI_Enable(void)
+{
+ SET_BIT(RCC->CSR, RCC_CSR_LSION);
+}
+
+/**
+ * @brief Disable LSI Oscillator
+ * @rmtoll CSR LSION LL_RCC_LSI_Disable
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_LSI_Disable(void)
+{
+ CLEAR_BIT(RCC->CSR, RCC_CSR_LSION);
+}
+
+/**
+ * @brief Check if LSI is Ready
+ * @rmtoll CSR LSIRDY LL_RCC_LSI_IsReady
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_LSI_IsReady(void)
+{
+ return (READ_BIT(RCC->CSR, RCC_CSR_LSIRDY) == (RCC_CSR_LSIRDY));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EF_System System
+ * @{
+ */
+
+/**
+ * @brief Configure the system clock source
+ * @rmtoll CFGR SW LL_RCC_SetSysClkSource
+ * @param Source This parameter can be one of the following values:
+ * @arg @ref LL_RCC_SYS_CLKSOURCE_HSI
+ * @arg @ref LL_RCC_SYS_CLKSOURCE_HSE
+ * @arg @ref LL_RCC_SYS_CLKSOURCE_PLL
+ * @arg @ref LL_RCC_SYS_CLKSOURCE_HSI48 (*)
+ *
+ * (*) value not defined in all devices
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_SetSysClkSource(uint32_t Source)
+{
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_SW, Source);
+}
+
+/**
+ * @brief Get the system clock source
+ * @rmtoll CFGR SWS LL_RCC_GetSysClkSource
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_HSI
+ * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_HSE
+ * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_PLL
+ * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_HSI48 (*)
+ *
+ * (*) value not defined in all devices
+ */
+__STATIC_INLINE uint32_t LL_RCC_GetSysClkSource(void)
+{
+ return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_SWS));
+}
+
+/**
+ * @brief Set AHB prescaler
+ * @rmtoll CFGR HPRE LL_RCC_SetAHBPrescaler
+ * @param Prescaler This parameter can be one of the following values:
+ * @arg @ref LL_RCC_SYSCLK_DIV_1
+ * @arg @ref LL_RCC_SYSCLK_DIV_2
+ * @arg @ref LL_RCC_SYSCLK_DIV_4
+ * @arg @ref LL_RCC_SYSCLK_DIV_8
+ * @arg @ref LL_RCC_SYSCLK_DIV_16
+ * @arg @ref LL_RCC_SYSCLK_DIV_64
+ * @arg @ref LL_RCC_SYSCLK_DIV_128
+ * @arg @ref LL_RCC_SYSCLK_DIV_256
+ * @arg @ref LL_RCC_SYSCLK_DIV_512
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_SetAHBPrescaler(uint32_t Prescaler)
+{
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_HPRE, Prescaler);
+}
+
+/**
+ * @brief Set APB1 prescaler
+ * @rmtoll CFGR PPRE LL_RCC_SetAPB1Prescaler
+ * @param Prescaler This parameter can be one of the following values:
+ * @arg @ref LL_RCC_APB1_DIV_1
+ * @arg @ref LL_RCC_APB1_DIV_2
+ * @arg @ref LL_RCC_APB1_DIV_4
+ * @arg @ref LL_RCC_APB1_DIV_8
+ * @arg @ref LL_RCC_APB1_DIV_16
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_SetAPB1Prescaler(uint32_t Prescaler)
+{
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE, Prescaler);
+}
+
+/**
+ * @brief Get AHB prescaler
+ * @rmtoll CFGR HPRE LL_RCC_GetAHBPrescaler
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_SYSCLK_DIV_1
+ * @arg @ref LL_RCC_SYSCLK_DIV_2
+ * @arg @ref LL_RCC_SYSCLK_DIV_4
+ * @arg @ref LL_RCC_SYSCLK_DIV_8
+ * @arg @ref LL_RCC_SYSCLK_DIV_16
+ * @arg @ref LL_RCC_SYSCLK_DIV_64
+ * @arg @ref LL_RCC_SYSCLK_DIV_128
+ * @arg @ref LL_RCC_SYSCLK_DIV_256
+ * @arg @ref LL_RCC_SYSCLK_DIV_512
+ */
+__STATIC_INLINE uint32_t LL_RCC_GetAHBPrescaler(void)
+{
+ return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_HPRE));
+}
+
+/**
+ * @brief Get APB1 prescaler
+ * @rmtoll CFGR PPRE LL_RCC_GetAPB1Prescaler
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_APB1_DIV_1
+ * @arg @ref LL_RCC_APB1_DIV_2
+ * @arg @ref LL_RCC_APB1_DIV_4
+ * @arg @ref LL_RCC_APB1_DIV_8
+ * @arg @ref LL_RCC_APB1_DIV_16
+ */
+__STATIC_INLINE uint32_t LL_RCC_GetAPB1Prescaler(void)
+{
+ return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_PPRE));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EF_MCO MCO
+ * @{
+ */
+
+/**
+ * @brief Configure MCOx
+ * @rmtoll CFGR MCO LL_RCC_ConfigMCO\n
+ * CFGR MCOPRE LL_RCC_ConfigMCO\n
+ * CFGR PLLNODIV LL_RCC_ConfigMCO
+ * @param MCOxSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_MCO1SOURCE_NOCLOCK
+ * @arg @ref LL_RCC_MCO1SOURCE_HSI14
+ * @arg @ref LL_RCC_MCO1SOURCE_SYSCLK
+ * @arg @ref LL_RCC_MCO1SOURCE_HSI
+ * @arg @ref LL_RCC_MCO1SOURCE_HSE
+ * @arg @ref LL_RCC_MCO1SOURCE_LSI
+ * @arg @ref LL_RCC_MCO1SOURCE_LSE
+ * @arg @ref LL_RCC_MCO1SOURCE_HSI48 (*)
+ * @arg @ref LL_RCC_MCO1SOURCE_PLLCLK (*)
+ * @arg @ref LL_RCC_MCO1SOURCE_PLLCLK_DIV_2
+ *
+ * (*) value not defined in all devices
+ * @param MCOxPrescaler This parameter can be one of the following values:
+ * @arg @ref LL_RCC_MCO1_DIV_1
+ * @arg @ref LL_RCC_MCO1_DIV_2 (*)
+ * @arg @ref LL_RCC_MCO1_DIV_4 (*)
+ * @arg @ref LL_RCC_MCO1_DIV_8 (*)
+ * @arg @ref LL_RCC_MCO1_DIV_16 (*)
+ * @arg @ref LL_RCC_MCO1_DIV_32 (*)
+ * @arg @ref LL_RCC_MCO1_DIV_64 (*)
+ * @arg @ref LL_RCC_MCO1_DIV_128 (*)
+ *
+ * (*) value not defined in all devices
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_ConfigMCO(uint32_t MCOxSource, uint32_t MCOxPrescaler)
+{
+#if defined(RCC_CFGR_MCOPRE)
+#if defined(RCC_CFGR_PLLNODIV)
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_MCOSEL | RCC_CFGR_MCOPRE | RCC_CFGR_PLLNODIV, MCOxSource | MCOxPrescaler);
+#else
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_MCOSEL | RCC_CFGR_MCOPRE, MCOxSource | MCOxPrescaler);
+#endif /* RCC_CFGR_PLLNODIV */
+#else
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_MCOSEL, MCOxSource);
+#endif /* RCC_CFGR_MCOPRE */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EF_Peripheral_Clock_Source Peripheral Clock Source
+ * @{
+ */
+
+/**
+ * @brief Configure USARTx clock source
+ * @rmtoll CFGR3 USART1SW LL_RCC_SetUSARTClockSource\n
+ * CFGR3 USART2SW LL_RCC_SetUSARTClockSource\n
+ * CFGR3 USART3SW LL_RCC_SetUSARTClockSource
+ * @param USARTxSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_USART1_CLKSOURCE_PCLK1
+ * @arg @ref LL_RCC_USART1_CLKSOURCE_SYSCLK
+ * @arg @ref LL_RCC_USART1_CLKSOURCE_LSE
+ * @arg @ref LL_RCC_USART1_CLKSOURCE_HSI
+ * @arg @ref LL_RCC_USART2_CLKSOURCE_PCLK1 (*)
+ * @arg @ref LL_RCC_USART2_CLKSOURCE_SYSCLK (*)
+ * @arg @ref LL_RCC_USART2_CLKSOURCE_LSE (*)
+ * @arg @ref LL_RCC_USART2_CLKSOURCE_HSI (*)
+ * @arg @ref LL_RCC_USART3_CLKSOURCE_PCLK1 (*)
+ * @arg @ref LL_RCC_USART3_CLKSOURCE_SYSCLK (*)
+ * @arg @ref LL_RCC_USART3_CLKSOURCE_LSE (*)
+ * @arg @ref LL_RCC_USART3_CLKSOURCE_HSI (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_SetUSARTClockSource(uint32_t USARTxSource)
+{
+ MODIFY_REG(RCC->CFGR3, (RCC_CFGR3_USART1SW << ((USARTxSource & 0xFF000000U) >> 24U)), (USARTxSource & 0x00FFFFFFU));
+}
+
+/**
+ * @brief Configure I2Cx clock source
+ * @rmtoll CFGR3 I2C1SW LL_RCC_SetI2CClockSource
+ * @param I2CxSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_I2C1_CLKSOURCE_HSI
+ * @arg @ref LL_RCC_I2C1_CLKSOURCE_SYSCLK
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_SetI2CClockSource(uint32_t I2CxSource)
+{
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_I2C1SW, I2CxSource);
+}
+
+#if defined(CEC)
+/**
+ * @brief Configure CEC clock source
+ * @rmtoll CFGR3 CECSW LL_RCC_SetCECClockSource
+ * @param CECxSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_CEC_CLKSOURCE_HSI_DIV244
+ * @arg @ref LL_RCC_CEC_CLKSOURCE_LSE
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_SetCECClockSource(uint32_t CECxSource)
+{
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_CECSW, CECxSource);
+}
+#endif /* CEC */
+
+#if defined(USB)
+/**
+ * @brief Configure USB clock source
+ * @rmtoll CFGR3 USBSW LL_RCC_SetUSBClockSource
+ * @param USBxSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_USB_CLKSOURCE_HSI48 (*)
+ * @arg @ref LL_RCC_USB_CLKSOURCE_NONE (*)
+ * @arg @ref LL_RCC_USB_CLKSOURCE_PLL
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_SetUSBClockSource(uint32_t USBxSource)
+{
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_USBSW, USBxSource);
+}
+#endif /* USB */
+
+/**
+ * @brief Get USARTx clock source
+ * @rmtoll CFGR3 USART1SW LL_RCC_GetUSARTClockSource\n
+ * CFGR3 USART2SW LL_RCC_GetUSARTClockSource\n
+ * CFGR3 USART3SW LL_RCC_GetUSARTClockSource
+ * @param USARTx This parameter can be one of the following values:
+ * @arg @ref LL_RCC_USART1_CLKSOURCE
+ * @arg @ref LL_RCC_USART2_CLKSOURCE (*)
+ * @arg @ref LL_RCC_USART3_CLKSOURCE (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_USART1_CLKSOURCE_PCLK1
+ * @arg @ref LL_RCC_USART1_CLKSOURCE_SYSCLK
+ * @arg @ref LL_RCC_USART1_CLKSOURCE_LSE
+ * @arg @ref LL_RCC_USART1_CLKSOURCE_HSI
+ * @arg @ref LL_RCC_USART2_CLKSOURCE_PCLK1 (*)
+ * @arg @ref LL_RCC_USART2_CLKSOURCE_SYSCLK (*)
+ * @arg @ref LL_RCC_USART2_CLKSOURCE_LSE (*)
+ * @arg @ref LL_RCC_USART2_CLKSOURCE_HSI (*)
+ * @arg @ref LL_RCC_USART3_CLKSOURCE_PCLK1 (*)
+ * @arg @ref LL_RCC_USART3_CLKSOURCE_SYSCLK (*)
+ * @arg @ref LL_RCC_USART3_CLKSOURCE_LSE (*)
+ * @arg @ref LL_RCC_USART3_CLKSOURCE_HSI (*)
+ *
+ * (*) value not defined in all devices.
+ */
+__STATIC_INLINE uint32_t LL_RCC_GetUSARTClockSource(uint32_t USARTx)
+{
+ return (uint32_t)(READ_BIT(RCC->CFGR3, (RCC_CFGR3_USART1SW << USARTx)) | (USARTx << 24U));
+}
+
+/**
+ * @brief Get I2Cx clock source
+ * @rmtoll CFGR3 I2C1SW LL_RCC_GetI2CClockSource
+ * @param I2Cx This parameter can be one of the following values:
+ * @arg @ref LL_RCC_I2C1_CLKSOURCE
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_I2C1_CLKSOURCE_HSI
+ * @arg @ref LL_RCC_I2C1_CLKSOURCE_SYSCLK
+ */
+__STATIC_INLINE uint32_t LL_RCC_GetI2CClockSource(uint32_t I2Cx)
+{
+ return (uint32_t)(READ_BIT(RCC->CFGR3, I2Cx));
+}
+
+#if defined(CEC)
+/**
+ * @brief Get CEC clock source
+ * @rmtoll CFGR3 CECSW LL_RCC_GetCECClockSource
+ * @param CECx This parameter can be one of the following values:
+ * @arg @ref LL_RCC_CEC_CLKSOURCE
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_CEC_CLKSOURCE_HSI_DIV244
+ * @arg @ref LL_RCC_CEC_CLKSOURCE_LSE
+ */
+__STATIC_INLINE uint32_t LL_RCC_GetCECClockSource(uint32_t CECx)
+{
+ return (uint32_t)(READ_BIT(RCC->CFGR3, CECx));
+}
+#endif /* CEC */
+
+#if defined(USB)
+/**
+ * @brief Get USBx clock source
+ * @rmtoll CFGR3 USBSW LL_RCC_GetUSBClockSource
+ * @param USBx This parameter can be one of the following values:
+ * @arg @ref LL_RCC_USB_CLKSOURCE
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_USB_CLKSOURCE_HSI48 (*)
+ * @arg @ref LL_RCC_USB_CLKSOURCE_NONE (*)
+ * @arg @ref LL_RCC_USB_CLKSOURCE_PLL
+ *
+ * (*) value not defined in all devices.
+ */
+__STATIC_INLINE uint32_t LL_RCC_GetUSBClockSource(uint32_t USBx)
+{
+ return (uint32_t)(READ_BIT(RCC->CFGR3, USBx));
+}
+#endif /* USB */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EF_RTC RTC
+ * @{
+ */
+
+/**
+ * @brief Set RTC Clock Source
+ * @note Once the RTC clock source has been selected, it cannot be changed any more unless
+ * the Backup domain is reset. The BDRST bit can be used to reset them.
+ * @rmtoll BDCR RTCSEL LL_RCC_SetRTCClockSource
+ * @param Source This parameter can be one of the following values:
+ * @arg @ref LL_RCC_RTC_CLKSOURCE_NONE
+ * @arg @ref LL_RCC_RTC_CLKSOURCE_LSE
+ * @arg @ref LL_RCC_RTC_CLKSOURCE_LSI
+ * @arg @ref LL_RCC_RTC_CLKSOURCE_HSE_DIV32
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_SetRTCClockSource(uint32_t Source)
+{
+ MODIFY_REG(RCC->BDCR, RCC_BDCR_RTCSEL, Source);
+}
+
+/**
+ * @brief Get RTC Clock Source
+ * @rmtoll BDCR RTCSEL LL_RCC_GetRTCClockSource
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_RTC_CLKSOURCE_NONE
+ * @arg @ref LL_RCC_RTC_CLKSOURCE_LSE
+ * @arg @ref LL_RCC_RTC_CLKSOURCE_LSI
+ * @arg @ref LL_RCC_RTC_CLKSOURCE_HSE_DIV32
+ */
+__STATIC_INLINE uint32_t LL_RCC_GetRTCClockSource(void)
+{
+ return (uint32_t)(READ_BIT(RCC->BDCR, RCC_BDCR_RTCSEL));
+}
+
+/**
+ * @brief Enable RTC
+ * @rmtoll BDCR RTCEN LL_RCC_EnableRTC
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_EnableRTC(void)
+{
+ SET_BIT(RCC->BDCR, RCC_BDCR_RTCEN);
+}
+
+/**
+ * @brief Disable RTC
+ * @rmtoll BDCR RTCEN LL_RCC_DisableRTC
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_DisableRTC(void)
+{
+ CLEAR_BIT(RCC->BDCR, RCC_BDCR_RTCEN);
+}
+
+/**
+ * @brief Check if RTC has been enabled or not
+ * @rmtoll BDCR RTCEN LL_RCC_IsEnabledRTC
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsEnabledRTC(void)
+{
+ return (READ_BIT(RCC->BDCR, RCC_BDCR_RTCEN) == (RCC_BDCR_RTCEN));
+}
+
+/**
+ * @brief Force the Backup domain reset
+ * @rmtoll BDCR BDRST LL_RCC_ForceBackupDomainReset
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_ForceBackupDomainReset(void)
+{
+ SET_BIT(RCC->BDCR, RCC_BDCR_BDRST);
+}
+
+/**
+ * @brief Release the Backup domain reset
+ * @rmtoll BDCR BDRST LL_RCC_ReleaseBackupDomainReset
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_ReleaseBackupDomainReset(void)
+{
+ CLEAR_BIT(RCC->BDCR, RCC_BDCR_BDRST);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EF_PLL PLL
+ * @{
+ */
+
+/**
+ * @brief Enable PLL
+ * @rmtoll CR PLLON LL_RCC_PLL_Enable
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_PLL_Enable(void)
+{
+ SET_BIT(RCC->CR, RCC_CR_PLLON);
+}
+
+/**
+ * @brief Disable PLL
+ * @note Cannot be disabled if the PLL clock is used as the system clock
+ * @rmtoll CR PLLON LL_RCC_PLL_Disable
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_PLL_Disable(void)
+{
+ CLEAR_BIT(RCC->CR, RCC_CR_PLLON);
+}
+
+/**
+ * @brief Check if PLL Ready
+ * @rmtoll CR PLLRDY LL_RCC_PLL_IsReady
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_PLL_IsReady(void)
+{
+ return (READ_BIT(RCC->CR, RCC_CR_PLLRDY) == (RCC_CR_PLLRDY));
+}
+
+#if defined(RCC_PLLSRC_PREDIV1_SUPPORT)
+/**
+ * @brief Configure PLL used for SYSCLK Domain
+ * @rmtoll CFGR PLLSRC LL_RCC_PLL_ConfigDomain_SYS\n
+ * CFGR PLLMUL LL_RCC_PLL_ConfigDomain_SYS\n
+ * CFGR2 PREDIV LL_RCC_PLL_ConfigDomain_SYS
+ * @param Source This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSOURCE_HSI
+ * @arg @ref LL_RCC_PLLSOURCE_HSE
+ * @arg @ref LL_RCC_PLLSOURCE_HSI48 (*)
+ *
+ * (*) value not defined in all devices
+ * @param PLLMul This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLL_MUL_2
+ * @arg @ref LL_RCC_PLL_MUL_3
+ * @arg @ref LL_RCC_PLL_MUL_4
+ * @arg @ref LL_RCC_PLL_MUL_5
+ * @arg @ref LL_RCC_PLL_MUL_6
+ * @arg @ref LL_RCC_PLL_MUL_7
+ * @arg @ref LL_RCC_PLL_MUL_8
+ * @arg @ref LL_RCC_PLL_MUL_9
+ * @arg @ref LL_RCC_PLL_MUL_10
+ * @arg @ref LL_RCC_PLL_MUL_11
+ * @arg @ref LL_RCC_PLL_MUL_12
+ * @arg @ref LL_RCC_PLL_MUL_13
+ * @arg @ref LL_RCC_PLL_MUL_14
+ * @arg @ref LL_RCC_PLL_MUL_15
+ * @arg @ref LL_RCC_PLL_MUL_16
+ * @param PLLDiv This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PREDIV_DIV_1
+ * @arg @ref LL_RCC_PREDIV_DIV_2
+ * @arg @ref LL_RCC_PREDIV_DIV_3
+ * @arg @ref LL_RCC_PREDIV_DIV_4
+ * @arg @ref LL_RCC_PREDIV_DIV_5
+ * @arg @ref LL_RCC_PREDIV_DIV_6
+ * @arg @ref LL_RCC_PREDIV_DIV_7
+ * @arg @ref LL_RCC_PREDIV_DIV_8
+ * @arg @ref LL_RCC_PREDIV_DIV_9
+ * @arg @ref LL_RCC_PREDIV_DIV_10
+ * @arg @ref LL_RCC_PREDIV_DIV_11
+ * @arg @ref LL_RCC_PREDIV_DIV_12
+ * @arg @ref LL_RCC_PREDIV_DIV_13
+ * @arg @ref LL_RCC_PREDIV_DIV_14
+ * @arg @ref LL_RCC_PREDIV_DIV_15
+ * @arg @ref LL_RCC_PREDIV_DIV_16
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_SYS(uint32_t Source, uint32_t PLLMul, uint32_t PLLDiv)
+{
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_PLLSRC | RCC_CFGR_PLLMUL, Source | PLLMul);
+ MODIFY_REG(RCC->CFGR2, RCC_CFGR2_PREDIV, PLLDiv);
+}
+
+#else
+
+/**
+ * @brief Configure PLL used for SYSCLK Domain
+ * @rmtoll CFGR PLLSRC LL_RCC_PLL_ConfigDomain_SYS\n
+ * CFGR PLLMUL LL_RCC_PLL_ConfigDomain_SYS\n
+ * CFGR2 PREDIV LL_RCC_PLL_ConfigDomain_SYS
+ * @param Source This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSOURCE_HSI_DIV_2
+ * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_1
+ * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_2
+ * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_3
+ * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_4
+ * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_5
+ * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_6
+ * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_7
+ * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_8
+ * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_9
+ * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_10
+ * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_11
+ * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_12
+ * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_13
+ * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_14
+ * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_15
+ * @arg @ref LL_RCC_PLLSOURCE_HSE_DIV_16
+ * @param PLLMul This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLL_MUL_2
+ * @arg @ref LL_RCC_PLL_MUL_3
+ * @arg @ref LL_RCC_PLL_MUL_4
+ * @arg @ref LL_RCC_PLL_MUL_5
+ * @arg @ref LL_RCC_PLL_MUL_6
+ * @arg @ref LL_RCC_PLL_MUL_7
+ * @arg @ref LL_RCC_PLL_MUL_8
+ * @arg @ref LL_RCC_PLL_MUL_9
+ * @arg @ref LL_RCC_PLL_MUL_10
+ * @arg @ref LL_RCC_PLL_MUL_11
+ * @arg @ref LL_RCC_PLL_MUL_12
+ * @arg @ref LL_RCC_PLL_MUL_13
+ * @arg @ref LL_RCC_PLL_MUL_14
+ * @arg @ref LL_RCC_PLL_MUL_15
+ * @arg @ref LL_RCC_PLL_MUL_16
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_SYS(uint32_t Source, uint32_t PLLMul)
+{
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_PLLSRC | RCC_CFGR_PLLMUL, (Source & RCC_CFGR_PLLSRC) | PLLMul);
+ MODIFY_REG(RCC->CFGR2, RCC_CFGR2_PREDIV, (Source & RCC_CFGR2_PREDIV));
+}
+#endif /* RCC_PLLSRC_PREDIV1_SUPPORT */
+
+/**
+ * @brief Configure PLL clock source
+ * @rmtoll CFGR PLLSRC LL_RCC_PLL_SetMainSource
+ * @param PLLSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSOURCE_NONE
+ * @arg @ref LL_RCC_PLLSOURCE_HSI (*)
+ * @arg @ref LL_RCC_PLLSOURCE_HSI_DIV_2 (*)
+ * @arg @ref LL_RCC_PLLSOURCE_HSE
+ * @arg @ref LL_RCC_PLLSOURCE_HSI48 (*)
+ *
+ * (*) value not defined in all devices
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_PLL_SetMainSource(uint32_t PLLSource)
+{
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_PLLSRC, PLLSource);
+}
+
+/**
+ * @brief Get the oscillator used as PLL clock source.
+ * @rmtoll CFGR PLLSRC LL_RCC_PLL_GetMainSource
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_PLLSOURCE_NONE
+ * @arg @ref LL_RCC_PLLSOURCE_HSI (*)
+ * @arg @ref LL_RCC_PLLSOURCE_HSI_DIV_2 (*)
+ * @arg @ref LL_RCC_PLLSOURCE_HSE
+ * @arg @ref LL_RCC_PLLSOURCE_HSI48 (*)
+ *
+ * (*) value not defined in all devices
+ */
+__STATIC_INLINE uint32_t LL_RCC_PLL_GetMainSource(void)
+{
+ return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_PLLSRC));
+}
+
+/**
+ * @brief Get PLL multiplication Factor
+ * @rmtoll CFGR PLLMUL LL_RCC_PLL_GetMultiplicator
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_PLL_MUL_2
+ * @arg @ref LL_RCC_PLL_MUL_3
+ * @arg @ref LL_RCC_PLL_MUL_4
+ * @arg @ref LL_RCC_PLL_MUL_5
+ * @arg @ref LL_RCC_PLL_MUL_6
+ * @arg @ref LL_RCC_PLL_MUL_7
+ * @arg @ref LL_RCC_PLL_MUL_8
+ * @arg @ref LL_RCC_PLL_MUL_9
+ * @arg @ref LL_RCC_PLL_MUL_10
+ * @arg @ref LL_RCC_PLL_MUL_11
+ * @arg @ref LL_RCC_PLL_MUL_12
+ * @arg @ref LL_RCC_PLL_MUL_13
+ * @arg @ref LL_RCC_PLL_MUL_14
+ * @arg @ref LL_RCC_PLL_MUL_15
+ * @arg @ref LL_RCC_PLL_MUL_16
+ */
+__STATIC_INLINE uint32_t LL_RCC_PLL_GetMultiplicator(void)
+{
+ return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_PLLMUL));
+}
+
+/**
+ * @brief Get PREDIV division factor for the main PLL
+ * @note They can be written only when the PLL is disabled
+ * @rmtoll CFGR2 PREDIV LL_RCC_PLL_GetPrediv
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_PREDIV_DIV_1
+ * @arg @ref LL_RCC_PREDIV_DIV_2
+ * @arg @ref LL_RCC_PREDIV_DIV_3
+ * @arg @ref LL_RCC_PREDIV_DIV_4
+ * @arg @ref LL_RCC_PREDIV_DIV_5
+ * @arg @ref LL_RCC_PREDIV_DIV_6
+ * @arg @ref LL_RCC_PREDIV_DIV_7
+ * @arg @ref LL_RCC_PREDIV_DIV_8
+ * @arg @ref LL_RCC_PREDIV_DIV_9
+ * @arg @ref LL_RCC_PREDIV_DIV_10
+ * @arg @ref LL_RCC_PREDIV_DIV_11
+ * @arg @ref LL_RCC_PREDIV_DIV_12
+ * @arg @ref LL_RCC_PREDIV_DIV_13
+ * @arg @ref LL_RCC_PREDIV_DIV_14
+ * @arg @ref LL_RCC_PREDIV_DIV_15
+ * @arg @ref LL_RCC_PREDIV_DIV_16
+ */
+__STATIC_INLINE uint32_t LL_RCC_PLL_GetPrediv(void)
+{
+ return (uint32_t)(READ_BIT(RCC->CFGR2, RCC_CFGR2_PREDIV));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EF_FLAG_Management FLAG Management
+ * @{
+ */
+
+/**
+ * @brief Clear LSI ready interrupt flag
+ * @rmtoll CIR LSIRDYC LL_RCC_ClearFlag_LSIRDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_ClearFlag_LSIRDY(void)
+{
+ SET_BIT(RCC->CIR, RCC_CIR_LSIRDYC);
+}
+
+/**
+ * @brief Clear LSE ready interrupt flag
+ * @rmtoll CIR LSERDYC LL_RCC_ClearFlag_LSERDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_ClearFlag_LSERDY(void)
+{
+ SET_BIT(RCC->CIR, RCC_CIR_LSERDYC);
+}
+
+/**
+ * @brief Clear HSI ready interrupt flag
+ * @rmtoll CIR HSIRDYC LL_RCC_ClearFlag_HSIRDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_ClearFlag_HSIRDY(void)
+{
+ SET_BIT(RCC->CIR, RCC_CIR_HSIRDYC);
+}
+
+/**
+ * @brief Clear HSE ready interrupt flag
+ * @rmtoll CIR HSERDYC LL_RCC_ClearFlag_HSERDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_ClearFlag_HSERDY(void)
+{
+ SET_BIT(RCC->CIR, RCC_CIR_HSERDYC);
+}
+
+/**
+ * @brief Clear PLL ready interrupt flag
+ * @rmtoll CIR PLLRDYC LL_RCC_ClearFlag_PLLRDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_ClearFlag_PLLRDY(void)
+{
+ SET_BIT(RCC->CIR, RCC_CIR_PLLRDYC);
+}
+
+/**
+ * @brief Clear HSI14 ready interrupt flag
+ * @rmtoll CIR HSI14RDYC LL_RCC_ClearFlag_HSI14RDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_ClearFlag_HSI14RDY(void)
+{
+ SET_BIT(RCC->CIR, RCC_CIR_HSI14RDYC);
+}
+
+#if defined(RCC_HSI48_SUPPORT)
+/**
+ * @brief Clear HSI48 ready interrupt flag
+ * @rmtoll CIR HSI48RDYC LL_RCC_ClearFlag_HSI48RDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_ClearFlag_HSI48RDY(void)
+{
+ SET_BIT(RCC->CIR, RCC_CIR_HSI48RDYC);
+}
+#endif /* RCC_HSI48_SUPPORT */
+
+/**
+ * @brief Clear Clock security system interrupt flag
+ * @rmtoll CIR CSSC LL_RCC_ClearFlag_HSECSS
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_ClearFlag_HSECSS(void)
+{
+ SET_BIT(RCC->CIR, RCC_CIR_CSSC);
+}
+
+/**
+ * @brief Check if LSI ready interrupt occurred or not
+ * @rmtoll CIR LSIRDYF LL_RCC_IsActiveFlag_LSIRDY
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LSIRDY(void)
+{
+ return (READ_BIT(RCC->CIR, RCC_CIR_LSIRDYF) == (RCC_CIR_LSIRDYF));
+}
+
+/**
+ * @brief Check if LSE ready interrupt occurred or not
+ * @rmtoll CIR LSERDYF LL_RCC_IsActiveFlag_LSERDY
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LSERDY(void)
+{
+ return (READ_BIT(RCC->CIR, RCC_CIR_LSERDYF) == (RCC_CIR_LSERDYF));
+}
+
+/**
+ * @brief Check if HSI ready interrupt occurred or not
+ * @rmtoll CIR HSIRDYF LL_RCC_IsActiveFlag_HSIRDY
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSIRDY(void)
+{
+ return (READ_BIT(RCC->CIR, RCC_CIR_HSIRDYF) == (RCC_CIR_HSIRDYF));
+}
+
+/**
+ * @brief Check if HSE ready interrupt occurred or not
+ * @rmtoll CIR HSERDYF LL_RCC_IsActiveFlag_HSERDY
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSERDY(void)
+{
+ return (READ_BIT(RCC->CIR, RCC_CIR_HSERDYF) == (RCC_CIR_HSERDYF));
+}
+
+/**
+ * @brief Check if PLL ready interrupt occurred or not
+ * @rmtoll CIR PLLRDYF LL_RCC_IsActiveFlag_PLLRDY
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PLLRDY(void)
+{
+ return (READ_BIT(RCC->CIR, RCC_CIR_PLLRDYF) == (RCC_CIR_PLLRDYF));
+}
+
+/**
+ * @brief Check if HSI14 ready interrupt occurred or not
+ * @rmtoll CIR HSI14RDYF LL_RCC_IsActiveFlag_HSI14RDY
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSI14RDY(void)
+{
+ return (READ_BIT(RCC->CIR, RCC_CIR_HSI14RDYF) == (RCC_CIR_HSI14RDYF));
+}
+
+#if defined(RCC_HSI48_SUPPORT)
+/**
+ * @brief Check if HSI48 ready interrupt occurred or not
+ * @rmtoll CIR HSI48RDYF LL_RCC_IsActiveFlag_HSI48RDY
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSI48RDY(void)
+{
+ return (READ_BIT(RCC->CIR, RCC_CIR_HSI48RDYF) == (RCC_CIR_HSI48RDYF));
+}
+#endif /* RCC_HSI48_SUPPORT */
+
+/**
+ * @brief Check if Clock security system interrupt occurred or not
+ * @rmtoll CIR CSSF LL_RCC_IsActiveFlag_HSECSS
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSECSS(void)
+{
+ return (READ_BIT(RCC->CIR, RCC_CIR_CSSF) == (RCC_CIR_CSSF));
+}
+
+/**
+ * @brief Check if RCC flag Independent Watchdog reset is set or not.
+ * @rmtoll CSR IWDGRSTF LL_RCC_IsActiveFlag_IWDGRST
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_IWDGRST(void)
+{
+ return (READ_BIT(RCC->CSR, RCC_CSR_IWDGRSTF) == (RCC_CSR_IWDGRSTF));
+}
+
+/**
+ * @brief Check if RCC flag Low Power reset is set or not.
+ * @rmtoll CSR LPWRRSTF LL_RCC_IsActiveFlag_LPWRRST
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LPWRRST(void)
+{
+ return (READ_BIT(RCC->CSR, RCC_CSR_LPWRRSTF) == (RCC_CSR_LPWRRSTF));
+}
+
+/**
+ * @brief Check if RCC flag is set or not.
+ * @rmtoll CSR OBLRSTF LL_RCC_IsActiveFlag_OBLRST
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_OBLRST(void)
+{
+ return (READ_BIT(RCC->CSR, RCC_CSR_OBLRSTF) == (RCC_CSR_OBLRSTF));
+}
+
+/**
+ * @brief Check if RCC flag Pin reset is set or not.
+ * @rmtoll CSR PINRSTF LL_RCC_IsActiveFlag_PINRST
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PINRST(void)
+{
+ return (READ_BIT(RCC->CSR, RCC_CSR_PINRSTF) == (RCC_CSR_PINRSTF));
+}
+
+/**
+ * @brief Check if RCC flag POR/PDR reset is set or not.
+ * @rmtoll CSR PORRSTF LL_RCC_IsActiveFlag_PORRST
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PORRST(void)
+{
+ return (READ_BIT(RCC->CSR, RCC_CSR_PORRSTF) == (RCC_CSR_PORRSTF));
+}
+
+/**
+ * @brief Check if RCC flag Software reset is set or not.
+ * @rmtoll CSR SFTRSTF LL_RCC_IsActiveFlag_SFTRST
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_SFTRST(void)
+{
+ return (READ_BIT(RCC->CSR, RCC_CSR_SFTRSTF) == (RCC_CSR_SFTRSTF));
+}
+
+/**
+ * @brief Check if RCC flag Window Watchdog reset is set or not.
+ * @rmtoll CSR WWDGRSTF LL_RCC_IsActiveFlag_WWDGRST
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_WWDGRST(void)
+{
+ return (READ_BIT(RCC->CSR, RCC_CSR_WWDGRSTF) == (RCC_CSR_WWDGRSTF));
+}
+
+#if defined(RCC_CSR_V18PWRRSTF)
+/**
+ * @brief Check if RCC Reset flag of the 1.8 V domain is set or not.
+ * @rmtoll CSR V18PWRRSTF LL_RCC_IsActiveFlag_V18PWRRST
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_V18PWRRST(void)
+{
+ return (READ_BIT(RCC->CSR, RCC_CSR_V18PWRRSTF) == (RCC_CSR_V18PWRRSTF));
+}
+#endif /* RCC_CSR_V18PWRRSTF */
+
+/**
+ * @brief Set RMVF bit to clear the reset flags.
+ * @rmtoll CSR RMVF LL_RCC_ClearResetFlags
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_ClearResetFlags(void)
+{
+ SET_BIT(RCC->CSR, RCC_CSR_RMVF);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EF_IT_Management IT Management
+ * @{
+ */
+
+/**
+ * @brief Enable LSI ready interrupt
+ * @rmtoll CIR LSIRDYIE LL_RCC_EnableIT_LSIRDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_EnableIT_LSIRDY(void)
+{
+ SET_BIT(RCC->CIR, RCC_CIR_LSIRDYIE);
+}
+
+/**
+ * @brief Enable LSE ready interrupt
+ * @rmtoll CIR LSERDYIE LL_RCC_EnableIT_LSERDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_EnableIT_LSERDY(void)
+{
+ SET_BIT(RCC->CIR, RCC_CIR_LSERDYIE);
+}
+
+/**
+ * @brief Enable HSI ready interrupt
+ * @rmtoll CIR HSIRDYIE LL_RCC_EnableIT_HSIRDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_EnableIT_HSIRDY(void)
+{
+ SET_BIT(RCC->CIR, RCC_CIR_HSIRDYIE);
+}
+
+/**
+ * @brief Enable HSE ready interrupt
+ * @rmtoll CIR HSERDYIE LL_RCC_EnableIT_HSERDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_EnableIT_HSERDY(void)
+{
+ SET_BIT(RCC->CIR, RCC_CIR_HSERDYIE);
+}
+
+/**
+ * @brief Enable PLL ready interrupt
+ * @rmtoll CIR PLLRDYIE LL_RCC_EnableIT_PLLRDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_EnableIT_PLLRDY(void)
+{
+ SET_BIT(RCC->CIR, RCC_CIR_PLLRDYIE);
+}
+
+/**
+ * @brief Enable HSI14 ready interrupt
+ * @rmtoll CIR HSI14RDYIE LL_RCC_EnableIT_HSI14RDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_EnableIT_HSI14RDY(void)
+{
+ SET_BIT(RCC->CIR, RCC_CIR_HSI14RDYIE);
+}
+
+#if defined(RCC_HSI48_SUPPORT)
+/**
+ * @brief Enable HSI48 ready interrupt
+ * @rmtoll CIR HSI48RDYIE LL_RCC_EnableIT_HSI48RDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_EnableIT_HSI48RDY(void)
+{
+ SET_BIT(RCC->CIR, RCC_CIR_HSI48RDYIE);
+}
+#endif /* RCC_HSI48_SUPPORT */
+
+/**
+ * @brief Disable LSI ready interrupt
+ * @rmtoll CIR LSIRDYIE LL_RCC_DisableIT_LSIRDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_DisableIT_LSIRDY(void)
+{
+ CLEAR_BIT(RCC->CIR, RCC_CIR_LSIRDYIE);
+}
+
+/**
+ * @brief Disable LSE ready interrupt
+ * @rmtoll CIR LSERDYIE LL_RCC_DisableIT_LSERDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_DisableIT_LSERDY(void)
+{
+ CLEAR_BIT(RCC->CIR, RCC_CIR_LSERDYIE);
+}
+
+/**
+ * @brief Disable HSI ready interrupt
+ * @rmtoll CIR HSIRDYIE LL_RCC_DisableIT_HSIRDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_DisableIT_HSIRDY(void)
+{
+ CLEAR_BIT(RCC->CIR, RCC_CIR_HSIRDYIE);
+}
+
+/**
+ * @brief Disable HSE ready interrupt
+ * @rmtoll CIR HSERDYIE LL_RCC_DisableIT_HSERDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_DisableIT_HSERDY(void)
+{
+ CLEAR_BIT(RCC->CIR, RCC_CIR_HSERDYIE);
+}
+
+/**
+ * @brief Disable PLL ready interrupt
+ * @rmtoll CIR PLLRDYIE LL_RCC_DisableIT_PLLRDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_DisableIT_PLLRDY(void)
+{
+ CLEAR_BIT(RCC->CIR, RCC_CIR_PLLRDYIE);
+}
+
+/**
+ * @brief Disable HSI14 ready interrupt
+ * @rmtoll CIR HSI14RDYIE LL_RCC_DisableIT_HSI14RDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_DisableIT_HSI14RDY(void)
+{
+ CLEAR_BIT(RCC->CIR, RCC_CIR_HSI14RDYIE);
+}
+
+#if defined(RCC_HSI48_SUPPORT)
+/**
+ * @brief Disable HSI48 ready interrupt
+ * @rmtoll CIR HSI48RDYIE LL_RCC_DisableIT_HSI48RDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_DisableIT_HSI48RDY(void)
+{
+ CLEAR_BIT(RCC->CIR, RCC_CIR_HSI48RDYIE);
+}
+#endif /* RCC_HSI48_SUPPORT */
+
+/**
+ * @brief Checks if LSI ready interrupt source is enabled or disabled.
+ * @rmtoll CIR LSIRDYIE LL_RCC_IsEnabledIT_LSIRDY
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_LSIRDY(void)
+{
+ return (READ_BIT(RCC->CIR, RCC_CIR_LSIRDYIE) == (RCC_CIR_LSIRDYIE));
+}
+
+/**
+ * @brief Checks if LSE ready interrupt source is enabled or disabled.
+ * @rmtoll CIR LSERDYIE LL_RCC_IsEnabledIT_LSERDY
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_LSERDY(void)
+{
+ return (READ_BIT(RCC->CIR, RCC_CIR_LSERDYIE) == (RCC_CIR_LSERDYIE));
+}
+
+/**
+ * @brief Checks if HSI ready interrupt source is enabled or disabled.
+ * @rmtoll CIR HSIRDYIE LL_RCC_IsEnabledIT_HSIRDY
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_HSIRDY(void)
+{
+ return (READ_BIT(RCC->CIR, RCC_CIR_HSIRDYIE) == (RCC_CIR_HSIRDYIE));
+}
+
+/**
+ * @brief Checks if HSE ready interrupt source is enabled or disabled.
+ * @rmtoll CIR HSERDYIE LL_RCC_IsEnabledIT_HSERDY
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_HSERDY(void)
+{
+ return (READ_BIT(RCC->CIR, RCC_CIR_HSERDYIE) == (RCC_CIR_HSERDYIE));
+}
+
+/**
+ * @brief Checks if PLL ready interrupt source is enabled or disabled.
+ * @rmtoll CIR PLLRDYIE LL_RCC_IsEnabledIT_PLLRDY
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_PLLRDY(void)
+{
+ return (READ_BIT(RCC->CIR, RCC_CIR_PLLRDYIE) == (RCC_CIR_PLLRDYIE));
+}
+
+/**
+ * @brief Checks if HSI14 ready interrupt source is enabled or disabled.
+ * @rmtoll CIR HSI14RDYIE LL_RCC_IsEnabledIT_HSI14RDY
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_HSI14RDY(void)
+{
+ return (READ_BIT(RCC->CIR, RCC_CIR_HSI14RDYIE) == (RCC_CIR_HSI14RDYIE));
+}
+
+#if defined(RCC_HSI48_SUPPORT)
+/**
+ * @brief Checks if HSI48 ready interrupt source is enabled or disabled.
+ * @rmtoll CIR HSI48RDYIE LL_RCC_IsEnabledIT_HSI48RDY
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_HSI48RDY(void)
+{
+ return (READ_BIT(RCC->CIR, RCC_CIR_HSI48RDYIE) == (RCC_CIR_HSI48RDYIE));
+}
+#endif /* RCC_HSI48_SUPPORT */
+
+/**
+ * @}
+ */
+
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup RCC_LL_EF_Init De-initialization function
+ * @{
+ */
+ErrorStatus LL_RCC_DeInit(void);
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EF_Get_Freq Get system and peripherals clocks frequency functions
+ * @{
+ */
+void LL_RCC_GetSystemClocksFreq(LL_RCC_ClocksTypeDef *RCC_Clocks);
+uint32_t LL_RCC_GetUSARTClockFreq(uint32_t USARTxSource);
+uint32_t LL_RCC_GetI2CClockFreq(uint32_t I2CxSource);
+#if defined(USB_OTG_FS) || defined(USB)
+uint32_t LL_RCC_GetUSBClockFreq(uint32_t USBxSource);
+#endif /* USB_OTG_FS || USB */
+#if defined(CEC)
+uint32_t LL_RCC_GetCECClockFreq(uint32_t CECxSource);
+#endif /* CEC */
+/**
+ * @}
+ */
+#endif /* USE_FULL_LL_DRIVER */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* RCC */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_LL_RCC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_rtc.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_rtc.h
new file mode 100644
index 0000000..094bc12
--- /dev/null
+++ b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_rtc.h
@@ -0,0 +1,3169 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_ll_rtc.h
+ * @author MCD Application Team
+ * @brief Header file of RTC LL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_LL_RTC_H
+#define __STM32F0xx_LL_RTC_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx.h"
+
+/** @addtogroup STM32F0xx_LL_Driver
+ * @{
+ */
+
+#if defined(RTC)
+
+/** @defgroup RTC_LL RTC
+ * @{
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup RTC_LL_Private_Constants RTC Private Constants
+ * @{
+ */
+/* Masks Definition */
+#define RTC_INIT_MASK 0xFFFFFFFFU
+#define RTC_RSF_MASK 0xFFFFFF5FU
+
+/* Write protection defines */
+#define RTC_WRITE_PROTECTION_DISABLE ((uint8_t)0xFFU)
+#define RTC_WRITE_PROTECTION_ENABLE_1 ((uint8_t)0xCAU)
+#define RTC_WRITE_PROTECTION_ENABLE_2 ((uint8_t)0x53U)
+
+/* Defines used to combine date & time */
+#define RTC_OFFSET_WEEKDAY 24U
+#define RTC_OFFSET_DAY 16U
+#define RTC_OFFSET_MONTH 8U
+#define RTC_OFFSET_HOUR 16U
+#define RTC_OFFSET_MINUTE 8U
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup RTC_LL_Private_Macros RTC Private Macros
+ * @{
+ */
+/**
+ * @}
+ */
+#endif /*USE_FULL_LL_DRIVER*/
+
+/* Exported types ------------------------------------------------------------*/
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup RTC_LL_ES_INIT RTC Exported Init structure
+ * @{
+ */
+
+/**
+ * @brief RTC Init structures definition
+ */
+typedef struct
+{
+ uint32_t HourFormat; /*!< Specifies the RTC Hours Format.
+ This parameter can be a value of @ref RTC_LL_EC_HOURFORMAT
+
+ This feature can be modified afterwards using unitary function
+ @ref LL_RTC_SetHourFormat(). */
+
+ uint32_t AsynchPrescaler; /*!< Specifies the RTC Asynchronous Predivider value.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x7F
+
+ This feature can be modified afterwards using unitary function
+ @ref LL_RTC_SetAsynchPrescaler(). */
+
+ uint32_t SynchPrescaler; /*!< Specifies the RTC Synchronous Predivider value.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x7FFF
+
+ This feature can be modified afterwards using unitary function
+ @ref LL_RTC_SetSynchPrescaler(). */
+} LL_RTC_InitTypeDef;
+
+/**
+ * @brief RTC Time structure definition
+ */
+typedef struct
+{
+ uint32_t TimeFormat; /*!< Specifies the RTC AM/PM Time.
+ This parameter can be a value of @ref RTC_LL_EC_TIME_FORMAT
+
+ This feature can be modified afterwards using unitary function @ref LL_RTC_TIME_SetFormat(). */
+
+ uint8_t Hours; /*!< Specifies the RTC Time Hours.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 12 if the @ref LL_RTC_TIME_FORMAT_PM is selected.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 23 if the @ref LL_RTC_TIME_FORMAT_AM_OR_24 is selected.
+
+ This feature can be modified afterwards using unitary function @ref LL_RTC_TIME_SetHour(). */
+
+ uint8_t Minutes; /*!< Specifies the RTC Time Minutes.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 59
+
+ This feature can be modified afterwards using unitary function @ref LL_RTC_TIME_SetMinute(). */
+
+ uint8_t Seconds; /*!< Specifies the RTC Time Seconds.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 59
+
+ This feature can be modified afterwards using unitary function @ref LL_RTC_TIME_SetSecond(). */
+} LL_RTC_TimeTypeDef;
+
+/**
+ * @brief RTC Date structure definition
+ */
+typedef struct
+{
+ uint8_t WeekDay; /*!< Specifies the RTC Date WeekDay.
+ This parameter can be a value of @ref RTC_LL_EC_WEEKDAY
+
+ This feature can be modified afterwards using unitary function @ref LL_RTC_DATE_SetWeekDay(). */
+
+ uint8_t Month; /*!< Specifies the RTC Date Month.
+ This parameter can be a value of @ref RTC_LL_EC_MONTH
+
+ This feature can be modified afterwards using unitary function @ref LL_RTC_DATE_SetMonth(). */
+
+ uint8_t Day; /*!< Specifies the RTC Date Day.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 31
+
+ This feature can be modified afterwards using unitary function @ref LL_RTC_DATE_SetDay(). */
+
+ uint8_t Year; /*!< Specifies the RTC Date Year.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 99
+
+ This feature can be modified afterwards using unitary function @ref LL_RTC_DATE_SetYear(). */
+} LL_RTC_DateTypeDef;
+
+/**
+ * @brief RTC Alarm structure definition
+ */
+typedef struct
+{
+ LL_RTC_TimeTypeDef AlarmTime; /*!< Specifies the RTC Alarm Time members. */
+
+ uint32_t AlarmMask; /*!< Specifies the RTC Alarm Masks.
+
+ This parameter can be a value of @ref RTC_LL_EC_ALMA_MASK
+ This feature can be modified afterwards using unitary function @ref LL_RTC_ALMA_SetMask() for ALARM A.
+ */
+
+ uint32_t AlarmDateWeekDaySel; /*!< Specifies the RTC Alarm is on day or WeekDay.
+ This parameter can be a value of @ref RTC_LL_EC_ALMA_WEEKDAY_SELECTION
+
+ This feature can be modified afterwards using unitary function @ref LL_RTC_ALMA_EnableWeekday() or @ref LL_RTC_ALMA_DisableWeekday()
+ */
+
+ uint8_t AlarmDateWeekDay; /*!< Specifies the RTC Alarm Day/WeekDay.
+ If AlarmDateWeekDaySel set to day, this parameter must be a number between Min_Data = 1 and Max_Data = 31.
+
+ This feature can be modified afterwards using unitary function @ref LL_RTC_ALMA_SetDay()
+
+ If AlarmDateWeekDaySel set to Weekday, this parameter can be a value of @ref RTC_LL_EC_WEEKDAY.
+
+ This feature can be modified afterwards using unitary function @ref LL_RTC_ALMA_SetWeekDay()
+ */
+} LL_RTC_AlarmTypeDef;
+
+/**
+ * @}
+ */
+#endif /* USE_FULL_LL_DRIVER */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup RTC_LL_Exported_Constants RTC Exported Constants
+ * @{
+ */
+
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup RTC_LL_EC_FORMAT FORMAT
+ * @{
+ */
+#define LL_RTC_FORMAT_BIN 0x000000000U /*!< Binary data format */
+#define LL_RTC_FORMAT_BCD 0x000000001U /*!< BCD data format */
+/**
+ * @}
+ */
+
+/** @defgroup RTC_LL_EC_ALMA_WEEKDAY_SELECTION RTC Alarm A Date WeekDay
+ * @{
+ */
+#define LL_RTC_ALMA_DATEWEEKDAYSEL_DATE 0x00000000U /*!< Alarm A Date is selected */
+#define LL_RTC_ALMA_DATEWEEKDAYSEL_WEEKDAY RTC_ALRMAR_WDSEL /*!< Alarm A WeekDay is selected */
+/**
+ * @}
+ */
+
+#endif /* USE_FULL_LL_DRIVER */
+
+/** @defgroup RTC_LL_EC_GET_FLAG Get Flags Defines
+ * @brief Flags defines which can be used with LL_RTC_ReadReg function
+ * @{
+ */
+#define LL_RTC_ISR_RECALPF RTC_ISR_RECALPF
+#define LL_RTC_ISR_TAMP3F RTC_ISR_TAMP3F
+#define LL_RTC_ISR_TAMP2F RTC_ISR_TAMP2F
+#define LL_RTC_ISR_TAMP1F RTC_ISR_TAMP1F
+#define LL_RTC_ISR_TSOVF RTC_ISR_TSOVF
+#define LL_RTC_ISR_TSF RTC_ISR_TSF
+#define LL_RTC_ISR_WUTF RTC_ISR_WUTF
+#define LL_RTC_ISR_ALRAF RTC_ISR_ALRAF
+#define LL_RTC_ISR_INITF RTC_ISR_INITF
+#define LL_RTC_ISR_RSF RTC_ISR_RSF
+#define LL_RTC_ISR_INITS RTC_ISR_INITS
+#define LL_RTC_ISR_SHPF RTC_ISR_SHPF
+#define LL_RTC_ISR_WUTWF RTC_ISR_WUTWF
+#define LL_RTC_ISR_ALRAWF RTC_ISR_ALRAWF
+/**
+ * @}
+ */
+
+/** @defgroup RTC_LL_EC_IT IT Defines
+ * @brief IT defines which can be used with LL_RTC_ReadReg and LL_RTC_WriteReg functions
+ * @{
+ */
+#define LL_RTC_CR_TSIE RTC_CR_TSIE
+#define LL_RTC_CR_WUTIE RTC_CR_WUTIE
+#define LL_RTC_CR_ALRAIE RTC_CR_ALRAIE
+#define LL_RTC_TAFCR_TAMPIE RTC_TAFCR_TAMPIE
+/**
+ * @}
+ */
+
+/** @defgroup RTC_LL_EC_WEEKDAY WEEK DAY
+ * @{
+ */
+#define LL_RTC_WEEKDAY_MONDAY ((uint8_t)0x01U) /*!< Monday */
+#define LL_RTC_WEEKDAY_TUESDAY ((uint8_t)0x02U) /*!< Tuesday */
+#define LL_RTC_WEEKDAY_WEDNESDAY ((uint8_t)0x03U) /*!< Wednesday */
+#define LL_RTC_WEEKDAY_THURSDAY ((uint8_t)0x04U) /*!< Thrusday */
+#define LL_RTC_WEEKDAY_FRIDAY ((uint8_t)0x05U) /*!< Friday */
+#define LL_RTC_WEEKDAY_SATURDAY ((uint8_t)0x06U) /*!< Saturday */
+#define LL_RTC_WEEKDAY_SUNDAY ((uint8_t)0x07U) /*!< Sunday */
+/**
+ * @}
+ */
+
+/** @defgroup RTC_LL_EC_MONTH MONTH
+ * @{
+ */
+#define LL_RTC_MONTH_JANUARY ((uint8_t)0x01U) /*!< January */
+#define LL_RTC_MONTH_FEBRUARY ((uint8_t)0x02U) /*!< February */
+#define LL_RTC_MONTH_MARCH ((uint8_t)0x03U) /*!< March */
+#define LL_RTC_MONTH_APRIL ((uint8_t)0x04U) /*!< April */
+#define LL_RTC_MONTH_MAY ((uint8_t)0x05U) /*!< May */
+#define LL_RTC_MONTH_JUNE ((uint8_t)0x06U) /*!< June */
+#define LL_RTC_MONTH_JULY ((uint8_t)0x07U) /*!< July */
+#define LL_RTC_MONTH_AUGUST ((uint8_t)0x08U) /*!< August */
+#define LL_RTC_MONTH_SEPTEMBER ((uint8_t)0x09U) /*!< September */
+#define LL_RTC_MONTH_OCTOBER ((uint8_t)0x10U) /*!< October */
+#define LL_RTC_MONTH_NOVEMBER ((uint8_t)0x11U) /*!< November */
+#define LL_RTC_MONTH_DECEMBER ((uint8_t)0x12U) /*!< December */
+/**
+ * @}
+ */
+
+/** @defgroup RTC_LL_EC_HOURFORMAT HOUR FORMAT
+ * @{
+ */
+#define LL_RTC_HOURFORMAT_24HOUR 0x00000000U /*!< 24 hour/day format */
+#define LL_RTC_HOURFORMAT_AMPM RTC_CR_FMT /*!< AM/PM hour format */
+/**
+ * @}
+ */
+
+/** @defgroup RTC_LL_EC_ALARMOUT ALARM OUTPUT
+ * @{
+ */
+#define LL_RTC_ALARMOUT_DISABLE 0x00000000U /*!< Output disabled */
+#define LL_RTC_ALARMOUT_ALMA RTC_CR_OSEL_0 /*!< Alarm A output enabled */
+#define LL_RTC_ALARMOUT_ALMB RTC_CR_OSEL_1 /*!< Alarm B output enabled */
+#define LL_RTC_ALARMOUT_WAKEUP RTC_CR_OSEL /*!< Wakeup output enabled */
+/**
+ * @}
+ */
+
+/** @defgroup RTC_LL_EC_ALARM_OUTPUTTYPE ALARM OUTPUT TYPE
+ * @{
+ */
+#define LL_RTC_ALARM_OUTPUTTYPE_OPENDRAIN 0x00000000U /*!< RTC_ALARM, when mapped on PC13, is open-drain output */
+#define LL_RTC_ALARM_OUTPUTTYPE_PUSHPULL RTC_TAFCR_ALARMOUTTYPE /*!< RTC_ALARM, when mapped on PC13, is push-pull output */
+/**
+ * @}
+ */
+
+/** @defgroup RTC_LL_EC_PIN PIN
+ * @{
+ */
+#define LL_RTC_PIN_PC13 RTC_TAFCR_PC13MODE /*!< PC13 is forced to push-pull output if all RTC alternate functions are disabled */
+#define LL_RTC_PIN_PC14 RTC_TAFCR_PC14MODE /*!< PC14 is forced to push-pull output if LSE is disabled */
+#define LL_RTC_PIN_PC15 RTC_TAFCR_PC15MODE /*!< PC15 is forced to push-pull output if LSE is disabled */
+/**
+ * @}
+ */
+
+/** @defgroup RTC_LL_EC_OUTPUTPOLARITY_PIN OUTPUT POLARITY PIN
+ * @{
+ */
+#define LL_RTC_OUTPUTPOLARITY_PIN_HIGH 0x00000000U /*!< Pin is high when ALRAF/ALRBF/WUTF is asserted (depending on OSEL)*/
+#define LL_RTC_OUTPUTPOLARITY_PIN_LOW RTC_CR_POL /*!< Pin is low when ALRAF/ALRBF/WUTF is asserted (depending on OSEL) */
+/**
+ * @}
+ */
+
+/** @defgroup RTC_LL_EC_TIME_FORMAT TIME FORMAT
+ * @{
+ */
+#define LL_RTC_TIME_FORMAT_AM_OR_24 0x00000000U /*!< AM or 24-hour format */
+#define LL_RTC_TIME_FORMAT_PM RTC_TR_PM /*!< PM */
+/**
+ * @}
+ */
+
+/** @defgroup RTC_LL_EC_SHIFT_SECOND SHIFT SECOND
+ * @{
+ */
+#define LL_RTC_SHIFT_SECOND_DELAY 0x00000000U /* Delay (seconds) = SUBFS / (PREDIV_S + 1) */
+#define LL_RTC_SHIFT_SECOND_ADVANCE RTC_SHIFTR_ADD1S /* Advance (seconds) = (1 - (SUBFS / (PREDIV_S + 1))) */
+/**
+ * @}
+ */
+
+/** @defgroup RTC_LL_EC_ALMA_MASK ALARMA MASK
+ * @{
+ */
+#define LL_RTC_ALMA_MASK_NONE 0x00000000U /*!< No masks applied on Alarm A*/
+#define LL_RTC_ALMA_MASK_DATEWEEKDAY RTC_ALRMAR_MSK4 /*!< Date/day do not care in Alarm A comparison */
+#define LL_RTC_ALMA_MASK_HOURS RTC_ALRMAR_MSK3 /*!< Hours do not care in Alarm A comparison */
+#define LL_RTC_ALMA_MASK_MINUTES RTC_ALRMAR_MSK2 /*!< Minutes do not care in Alarm A comparison */
+#define LL_RTC_ALMA_MASK_SECONDS RTC_ALRMAR_MSK1 /*!< Seconds do not care in Alarm A comparison */
+#define LL_RTC_ALMA_MASK_ALL (RTC_ALRMAR_MSK4 | RTC_ALRMAR_MSK3 | RTC_ALRMAR_MSK2 | RTC_ALRMAR_MSK1) /*!< Masks all */
+/**
+ * @}
+ */
+
+/** @defgroup RTC_LL_EC_ALMA_TIME_FORMAT ALARMA TIME FORMAT
+ * @{
+ */
+#define LL_RTC_ALMA_TIME_FORMAT_AM 0x00000000U /*!< AM or 24-hour format */
+#define LL_RTC_ALMA_TIME_FORMAT_PM RTC_ALRMAR_PM /*!< PM */
+/**
+ * @}
+ */
+
+/** @defgroup RTC_LL_EC_TIMESTAMP_EDGE TIMESTAMP EDGE
+ * @{
+ */
+#define LL_RTC_TIMESTAMP_EDGE_RISING 0x00000000U /*!< RTC_TS input rising edge generates a time-stamp event */
+#define LL_RTC_TIMESTAMP_EDGE_FALLING RTC_CR_TSEDGE /*!< RTC_TS input falling edge generates a time-stamp even */
+/**
+ * @}
+ */
+
+/** @defgroup RTC_LL_EC_TS_TIME_FORMAT TIMESTAMP TIME FORMAT
+ * @{
+ */
+#define LL_RTC_TS_TIME_FORMAT_AM 0x00000000U /*!< AM or 24-hour format */
+#define LL_RTC_TS_TIME_FORMAT_PM RTC_TSTR_PM /*!< PM */
+/**
+ * @}
+ */
+
+/** @defgroup RTC_LL_EC_TAMPER TAMPER
+ * @{
+ */
+#if defined(RTC_TAMPER1_SUPPORT)
+#define LL_RTC_TAMPER_1 RTC_TAFCR_TAMP1E /*!< RTC_TAMP1 input detection */
+#endif /* RTC_TAMPER1_SUPPORT */
+#if defined(RTC_TAMPER2_SUPPORT)
+#define LL_RTC_TAMPER_2 RTC_TAFCR_TAMP2E /*!< RTC_TAMP2 input detection */
+#endif /* RTC_TAMPER2_SUPPORT */
+#if defined(RTC_TAMPER3_SUPPORT)
+#define LL_RTC_TAMPER_3 RTC_TAFCR_TAMP3E /*!< RTC_TAMP3 input detection */
+#endif /* RTC_TAMPER3_SUPPORT */
+/**
+ * @}
+ */
+
+/** @defgroup RTC_LL_EC_TAMPER_MASK TAMPER MASK
+ * @{
+ */
+#if defined(RTC_TAMPER1_SUPPORT)
+#define LL_RTC_TAMPER_MASK_TAMPER1 RTC_TAFCR_TAMP1MF /*!< Tamper 1 event generates a trigger event. TAMP1F is masked and internally cleared by hardware.The backup registers are not erased */
+#endif /* RTC_TAMPER1_SUPPORT */
+#if defined(RTC_TAMPER2_SUPPORT)
+#define LL_RTC_TAMPER_MASK_TAMPER2 RTC_TAFCR_TAMP2MF /*!< Tamper 2 event generates a trigger event. TAMP2F is masked and internally cleared by hardware. The backup registers are not erased. */
+#endif /* RTC_TAMPER2_SUPPORT */
+#if defined(RTC_TAMPER3_SUPPORT)
+#define LL_RTC_TAMPER_MASK_TAMPER3 RTC_TAFCR_TAMP3MF /*!< Tamper 3 event generates a trigger event. TAMP3F is masked and internally cleared by hardware. The backup registers are not erased */
+#endif /* RTC_TAMPER3_SUPPORT */
+/**
+ * @}
+ */
+
+/** @defgroup RTC_LL_EC_TAMPER_NOERASE TAMPER NO ERASE
+ * @{
+ */
+#if defined(RTC_TAMPER1_SUPPORT)
+#define LL_RTC_TAMPER_NOERASE_TAMPER1 RTC_TAFCR_TAMP1NOERASE /*!< Tamper 1 event does not erase the backup registers. */
+#endif /* RTC_TAMPER1_SUPPORT */
+#if defined(RTC_TAMPER2_SUPPORT)
+#define LL_RTC_TAMPER_NOERASE_TAMPER2 RTC_TAFCR_TAMP2NOERASE /*!< Tamper 2 event does not erase the backup registers. */
+#endif /* RTC_TAMPER2_SUPPORT */
+#if defined(RTC_TAMPER3_SUPPORT)
+#define LL_RTC_TAMPER_NOERASE_TAMPER3 RTC_TAFCR_TAMP3NOERASE /*!< Tamper 3 event does not erase the backup registers. */
+#endif /* RTC_TAMPER3_SUPPORT */
+/**
+ * @}
+ */
+
+#if defined(RTC_TAFCR_TAMPPRCH)
+/** @defgroup RTC_LL_EC_TAMPER_DURATION TAMPER DURATION
+ * @{
+ */
+#define LL_RTC_TAMPER_DURATION_1RTCCLK 0x00000000U /*!< Tamper pins are pre-charged before sampling during 1 RTCCLK cycle */
+#define LL_RTC_TAMPER_DURATION_2RTCCLK RTC_TAFCR_TAMPPRCH_0 /*!< Tamper pins are pre-charged before sampling during 2 RTCCLK cycles */
+#define LL_RTC_TAMPER_DURATION_4RTCCLK RTC_TAFCR_TAMPPRCH_1 /*!< Tamper pins are pre-charged before sampling during 4 RTCCLK cycles */
+#define LL_RTC_TAMPER_DURATION_8RTCCLK RTC_TAFCR_TAMPPRCH /*!< Tamper pins are pre-charged before sampling during 8 RTCCLK cycles */
+/**
+ * @}
+ */
+#endif /* RTC_TAFCR_TAMPPRCH */
+
+#if defined(RTC_TAFCR_TAMPFLT)
+/** @defgroup RTC_LL_EC_TAMPER_FILTER TAMPER FILTER
+ * @{
+ */
+#define LL_RTC_TAMPER_FILTER_DISABLE 0x00000000U /*!< Tamper filter is disabled */
+#define LL_RTC_TAMPER_FILTER_2SAMPLE RTC_TAFCR_TAMPFLT_0 /*!< Tamper is activated after 2 consecutive samples at the active level */
+#define LL_RTC_TAMPER_FILTER_4SAMPLE RTC_TAFCR_TAMPFLT_1 /*!< Tamper is activated after 4 consecutive samples at the active level */
+#define LL_RTC_TAMPER_FILTER_8SAMPLE RTC_TAFCR_TAMPFLT /*!< Tamper is activated after 8 consecutive samples at the active level. */
+/**
+ * @}
+ */
+#endif /* RTC_TAFCR_TAMPFLT */
+
+#if defined(RTC_TAFCR_TAMPFREQ)
+/** @defgroup RTC_LL_EC_TAMPER_SAMPLFREQDIV TAMPER SAMPLING FREQUENCY DIVIDER
+ * @{
+ */
+#define LL_RTC_TAMPER_SAMPLFREQDIV_32768 0x00000000U /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 32768 */
+#define LL_RTC_TAMPER_SAMPLFREQDIV_16384 RTC_TAFCR_TAMPFREQ_0 /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 16384 */
+#define LL_RTC_TAMPER_SAMPLFREQDIV_8192 RTC_TAFCR_TAMPFREQ_1 /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 8192 */
+#define LL_RTC_TAMPER_SAMPLFREQDIV_4096 (RTC_TAFCR_TAMPFREQ_1 | RTC_TAFCR_TAMPFREQ_0) /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 4096 */
+#define LL_RTC_TAMPER_SAMPLFREQDIV_2048 RTC_TAFCR_TAMPFREQ_2 /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 2048 */
+#define LL_RTC_TAMPER_SAMPLFREQDIV_1024 (RTC_TAFCR_TAMPFREQ_2 | RTC_TAFCR_TAMPFREQ_0) /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 1024 */
+#define LL_RTC_TAMPER_SAMPLFREQDIV_512 (RTC_TAFCR_TAMPFREQ_2 | RTC_TAFCR_TAMPFREQ_1) /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 512 */
+#define LL_RTC_TAMPER_SAMPLFREQDIV_256 RTC_TAFCR_TAMPFREQ /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 256 */
+/**
+ * @}
+ */
+#endif /* RTC_TAFCR_TAMPFREQ */
+
+/** @defgroup RTC_LL_EC_TAMPER_ACTIVELEVEL TAMPER ACTIVE LEVEL
+ * @{
+ */
+#if defined(RTC_TAMPER1_SUPPORT)
+#define LL_RTC_TAMPER_ACTIVELEVEL_TAMP1 RTC_TAFCR_TAMP1TRG /*!< RTC_TAMP1 input falling edge (if TAMPFLT = 00) or staying high (if TAMPFLT != 00) triggers a tamper detection event*/
+#endif /* RTC_TAMPER1_SUPPORT */
+#if defined(RTC_TAMPER2_SUPPORT)
+#define LL_RTC_TAMPER_ACTIVELEVEL_TAMP2 RTC_TAFCR_TAMP2TRG /*!< RTC_TAMP2 input falling edge (if TAMPFLT = 00) or staying high (if TAMPFLT != 00) triggers a tamper detection event*/
+#endif /* RTC_TAMPER2_SUPPORT */
+#if defined(RTC_TAMPER3_SUPPORT)
+#define LL_RTC_TAMPER_ACTIVELEVEL_TAMP3 RTC_TAFCR_TAMP3TRG /*!< RTC_TAMP3 input falling edge (if TAMPFLT = 00) or staying high (if TAMPFLT != 00) triggers a tamper detection event*/
+#endif /* RTC_TAMPER3_SUPPORT */
+/**
+ * @}
+ */
+
+/** @defgroup RTC_LL_EC_WAKEUPCLOCK_DIV WAKEUP CLOCK DIV
+ * @{
+ */
+#define LL_RTC_WAKEUPCLOCK_DIV_16 0x00000000U /*!< RTC/16 clock is selected */
+#define LL_RTC_WAKEUPCLOCK_DIV_8 (RTC_CR_WUCKSEL_0) /*!< RTC/8 clock is selected */
+#define LL_RTC_WAKEUPCLOCK_DIV_4 (RTC_CR_WUCKSEL_1) /*!< RTC/4 clock is selected */
+#define LL_RTC_WAKEUPCLOCK_DIV_2 (RTC_CR_WUCKSEL_1 | RTC_CR_WUCKSEL_0) /*!< RTC/2 clock is selected */
+#define LL_RTC_WAKEUPCLOCK_CKSPRE (RTC_CR_WUCKSEL_2) /*!< ck_spre (usually 1 Hz) clock is selected */
+#define LL_RTC_WAKEUPCLOCK_CKSPRE_WUT (RTC_CR_WUCKSEL_2 | RTC_CR_WUCKSEL_1) /*!< ck_spre (usually 1 Hz) clock is selected and 2exp16 is added to the WUT counter value*/
+/**
+ * @}
+ */
+
+#if defined(RTC_BACKUP_SUPPORT)
+/** @defgroup RTC_LL_EC_BKP BACKUP
+ * @{
+ */
+#define LL_RTC_BKP_DR0 0x00000000U
+#define LL_RTC_BKP_DR1 0x00000001U
+#define LL_RTC_BKP_DR2 0x00000002U
+#define LL_RTC_BKP_DR3 0x00000003U
+#define LL_RTC_BKP_DR4 0x00000004U
+/**
+ * @}
+ */
+#endif /* RTC_BACKUP_SUPPORT */
+
+/** @defgroup RTC_LL_EC_CALIB_OUTPUT Calibration output
+ * @{
+ */
+#define LL_RTC_CALIB_OUTPUT_NONE 0x00000000U /*!< Calibration output disabled */
+#define LL_RTC_CALIB_OUTPUT_1HZ (RTC_CR_COE | RTC_CR_COSEL) /*!< Calibration output is 1 Hz */
+#define LL_RTC_CALIB_OUTPUT_512HZ (RTC_CR_COE) /*!< Calibration output is 512 Hz */
+/**
+ * @}
+ */
+
+/** @defgroup RTC_LL_EC_CALIB_INSERTPULSE Calibration pulse insertion
+ * @{
+ */
+#define LL_RTC_CALIB_INSERTPULSE_NONE 0x00000000U /*!< No RTCCLK pulses are added */
+#define LL_RTC_CALIB_INSERTPULSE_SET RTC_CALR_CALP /*!< One RTCCLK pulse is effectively inserted every 2exp11 pulses (frequency increased by 488.5 ppm) */
+/**
+ * @}
+ */
+
+/** @defgroup RTC_LL_EC_CALIB_PERIOD Calibration period
+ * @{
+ */
+#define LL_RTC_CALIB_PERIOD_32SEC 0x00000000U /*!< Use a 32-second calibration cycle period */
+#define LL_RTC_CALIB_PERIOD_16SEC RTC_CALR_CALW16 /*!< Use a 16-second calibration cycle period */
+#define LL_RTC_CALIB_PERIOD_8SEC RTC_CALR_CALW8 /*!< Use a 8-second calibration cycle period */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup RTC_LL_Exported_Macros RTC Exported Macros
+ * @{
+ */
+
+/** @defgroup RTC_LL_EM_WRITE_READ Common Write and read registers Macros
+ * @{
+ */
+
+/**
+ * @brief Write a value in RTC register
+ * @param __INSTANCE__ RTC Instance
+ * @param __REG__ Register to be written
+ * @param __VALUE__ Value to be written in the register
+ * @retval None
+ */
+#define LL_RTC_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__))
+
+/**
+ * @brief Read a value in RTC register
+ * @param __INSTANCE__ RTC Instance
+ * @param __REG__ Register to be read
+ * @retval Register value
+ */
+#define LL_RTC_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__)
+/**
+ * @}
+ */
+
+/** @defgroup RTC_LL_EM_Convert Convert helper Macros
+ * @{
+ */
+
+/**
+ * @brief Helper macro to convert a value from 2 digit decimal format to BCD format
+ * @param __VALUE__ Byte to be converted
+ * @retval Converted byte
+ */
+#define __LL_RTC_CONVERT_BIN2BCD(__VALUE__) (uint8_t)((((__VALUE__) / 10U) << 4U) | ((__VALUE__) % 10U))
+
+/**
+ * @brief Helper macro to convert a value from BCD format to 2 digit decimal format
+ * @param __VALUE__ BCD value to be converted
+ * @retval Converted byte
+ */
+#define __LL_RTC_CONVERT_BCD2BIN(__VALUE__) (uint8_t)(((uint8_t)((__VALUE__) & (uint8_t)0xF0U) >> (uint8_t)0x4U) * 10U + ((__VALUE__) & (uint8_t)0x0FU))
+
+/**
+ * @}
+ */
+
+/** @defgroup RTC_LL_EM_Date Date helper Macros
+ * @{
+ */
+
+/**
+ * @brief Helper macro to retrieve weekday.
+ * @param __RTC_DATE__ Date returned by @ref LL_RTC_DATE_Get function.
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RTC_WEEKDAY_MONDAY
+ * @arg @ref LL_RTC_WEEKDAY_TUESDAY
+ * @arg @ref LL_RTC_WEEKDAY_WEDNESDAY
+ * @arg @ref LL_RTC_WEEKDAY_THURSDAY
+ * @arg @ref LL_RTC_WEEKDAY_FRIDAY
+ * @arg @ref LL_RTC_WEEKDAY_SATURDAY
+ * @arg @ref LL_RTC_WEEKDAY_SUNDAY
+ */
+#define __LL_RTC_GET_WEEKDAY(__RTC_DATE__) (((__RTC_DATE__) >> RTC_OFFSET_WEEKDAY) & 0x000000FFU)
+
+/**
+ * @brief Helper macro to retrieve Year in BCD format
+ * @param __RTC_DATE__ Value returned by @ref LL_RTC_DATE_Get
+ * @retval Year in BCD format (0x00 . . . 0x99)
+ */
+#define __LL_RTC_GET_YEAR(__RTC_DATE__) ((__RTC_DATE__) & 0x000000FFU)
+
+/**
+ * @brief Helper macro to retrieve Month in BCD format
+ * @param __RTC_DATE__ Value returned by @ref LL_RTC_DATE_Get
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RTC_MONTH_JANUARY
+ * @arg @ref LL_RTC_MONTH_FEBRUARY
+ * @arg @ref LL_RTC_MONTH_MARCH
+ * @arg @ref LL_RTC_MONTH_APRIL
+ * @arg @ref LL_RTC_MONTH_MAY
+ * @arg @ref LL_RTC_MONTH_JUNE
+ * @arg @ref LL_RTC_MONTH_JULY
+ * @arg @ref LL_RTC_MONTH_AUGUST
+ * @arg @ref LL_RTC_MONTH_SEPTEMBER
+ * @arg @ref LL_RTC_MONTH_OCTOBER
+ * @arg @ref LL_RTC_MONTH_NOVEMBER
+ * @arg @ref LL_RTC_MONTH_DECEMBER
+ */
+#define __LL_RTC_GET_MONTH(__RTC_DATE__) (((__RTC_DATE__) >>RTC_OFFSET_MONTH) & 0x000000FFU)
+
+/**
+ * @brief Helper macro to retrieve Day in BCD format
+ * @param __RTC_DATE__ Value returned by @ref LL_RTC_DATE_Get
+ * @retval Day in BCD format (0x01 . . . 0x31)
+ */
+#define __LL_RTC_GET_DAY(__RTC_DATE__) (((__RTC_DATE__) >>RTC_OFFSET_DAY) & 0x000000FFU)
+
+/**
+ * @}
+ */
+
+/** @defgroup RTC_LL_EM_Time Time helper Macros
+ * @{
+ */
+
+/**
+ * @brief Helper macro to retrieve hour in BCD format
+ * @param __RTC_TIME__ RTC time returned by @ref LL_RTC_TIME_Get function
+ * @retval Hours in BCD format (0x01. . .0x12 or between Min_Data=0x00 and Max_Data=0x23)
+ */
+#define __LL_RTC_GET_HOUR(__RTC_TIME__) (((__RTC_TIME__) >> RTC_OFFSET_HOUR) & 0x000000FFU)
+
+/**
+ * @brief Helper macro to retrieve minute in BCD format
+ * @param __RTC_TIME__ RTC time returned by @ref LL_RTC_TIME_Get function
+ * @retval Minutes in BCD format (0x00. . .0x59)
+ */
+#define __LL_RTC_GET_MINUTE(__RTC_TIME__) (((__RTC_TIME__) >> RTC_OFFSET_MINUTE) & 0x000000FFU)
+
+/**
+ * @brief Helper macro to retrieve second in BCD format
+ * @param __RTC_TIME__ RTC time returned by @ref LL_RTC_TIME_Get function
+ * @retval Seconds in format (0x00. . .0x59)
+ */
+#define __LL_RTC_GET_SECOND(__RTC_TIME__) ((__RTC_TIME__) & 0x000000FFU)
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup RTC_LL_Exported_Functions RTC Exported Functions
+ * @{
+ */
+
+/** @defgroup RTC_LL_EF_Configuration Configuration
+ * @{
+ */
+
+/**
+ * @brief Set Hours format (24 hour/day or AM/PM hour format)
+ * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before.
+ * @note It can be written in initialization mode only (@ref LL_RTC_EnableInitMode function)
+ * @rmtoll CR FMT LL_RTC_SetHourFormat
+ * @param RTCx RTC Instance
+ * @param HourFormat This parameter can be one of the following values:
+ * @arg @ref LL_RTC_HOURFORMAT_24HOUR
+ * @arg @ref LL_RTC_HOURFORMAT_AMPM
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_SetHourFormat(RTC_TypeDef *RTCx, uint32_t HourFormat)
+{
+ MODIFY_REG(RTCx->CR, RTC_CR_FMT, HourFormat);
+}
+
+/**
+ * @brief Get Hours format (24 hour/day or AM/PM hour format)
+ * @rmtoll CR FMT LL_RTC_GetHourFormat
+ * @param RTCx RTC Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RTC_HOURFORMAT_24HOUR
+ * @arg @ref LL_RTC_HOURFORMAT_AMPM
+ */
+__STATIC_INLINE uint32_t LL_RTC_GetHourFormat(RTC_TypeDef *RTCx)
+{
+ return (uint32_t)(READ_BIT(RTCx->CR, RTC_CR_FMT));
+}
+
+/**
+ * @brief Select the flag to be routed to RTC_ALARM output
+ * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before.
+ * @rmtoll CR OSEL LL_RTC_SetAlarmOutEvent
+ * @param RTCx RTC Instance
+ * @param AlarmOutput This parameter can be one of the following values:
+ * @arg @ref LL_RTC_ALARMOUT_DISABLE
+ * @arg @ref LL_RTC_ALARMOUT_ALMA
+ * @arg @ref LL_RTC_ALARMOUT_ALMB
+ * @arg @ref LL_RTC_ALARMOUT_WAKEUP
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_SetAlarmOutEvent(RTC_TypeDef *RTCx, uint32_t AlarmOutput)
+{
+ MODIFY_REG(RTCx->CR, RTC_CR_OSEL, AlarmOutput);
+}
+
+/**
+ * @brief Get the flag to be routed to RTC_ALARM output
+ * @rmtoll CR OSEL LL_RTC_GetAlarmOutEvent
+ * @param RTCx RTC Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RTC_ALARMOUT_DISABLE
+ * @arg @ref LL_RTC_ALARMOUT_ALMA
+ * @arg @ref LL_RTC_ALARMOUT_ALMB
+ * @arg @ref LL_RTC_ALARMOUT_WAKEUP
+ */
+__STATIC_INLINE uint32_t LL_RTC_GetAlarmOutEvent(RTC_TypeDef *RTCx)
+{
+ return (uint32_t)(READ_BIT(RTCx->CR, RTC_CR_OSEL));
+}
+
+/**
+ * @brief Set RTC_ALARM output type (ALARM in push-pull or open-drain output)
+ * @note Used only when RTC_ALARM is mapped on PC13
+ * @note If all RTC alternate functions are disabled and PC13MODE = 1, PC13VALUE configures the
+ * PC13 output data
+ * @rmtoll TAFCR ALARMOUTTYPE LL_RTC_SetAlarmOutputType
+ * @param RTCx RTC Instance
+ * @param Output This parameter can be one of the following values:
+ * @arg @ref LL_RTC_ALARM_OUTPUTTYPE_OPENDRAIN
+ * @arg @ref LL_RTC_ALARM_OUTPUTTYPE_PUSHPULL
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_SetAlarmOutputType(RTC_TypeDef *RTCx, uint32_t Output)
+{
+ MODIFY_REG(RTCx->TAFCR, RTC_TAFCR_ALARMOUTTYPE, Output);
+}
+
+/**
+ * @brief Get RTC_ALARM output type (ALARM in push-pull or open-drain output)
+ * @note used only when RTC_ALARM is mapped on PC13
+ * @note If all RTC alternate functions are disabled and PC13MODE = 1, PC13VALUE configures the
+ * PC13 output data
+ * @rmtoll TAFCR ALARMOUTTYPE LL_RTC_GetAlarmOutputType
+ * @param RTCx RTC Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RTC_ALARM_OUTPUTTYPE_OPENDRAIN
+ * @arg @ref LL_RTC_ALARM_OUTPUTTYPE_PUSHPULL
+ */
+__STATIC_INLINE uint32_t LL_RTC_GetAlarmOutputType(RTC_TypeDef *RTCx)
+{
+ return (uint32_t)(READ_BIT(RTCx->TAFCR, RTC_TAFCR_ALARMOUTTYPE));
+}
+
+/**
+ * @brief Enable push-pull output on PC13, PC14 and/or PC15
+ * @note PC13 forced to push-pull output if all RTC alternate functions are disabled
+ * @note PC14 and PC15 forced to push-pull output if LSE is disabled
+ * @rmtoll TAFCR PC13MODE LL_RTC_EnablePushPullMode\n
+ * @rmtoll TAFCR PC14MODE LL_RTC_EnablePushPullMode\n
+ * @rmtoll TAFCR PC15MODE LL_RTC_EnablePushPullMode
+ * @param RTCx RTC Instance
+ * @param PinMask This parameter can be a combination of the following values:
+ * @arg @ref LL_RTC_PIN_PC13
+ * @arg @ref LL_RTC_PIN_PC14
+ * @arg @ref LL_RTC_PIN_PC15
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_EnablePushPullMode(RTC_TypeDef *RTCx, uint32_t PinMask)
+{
+ SET_BIT(RTCx->TAFCR, PinMask);
+}
+
+/**
+ * @brief Disable push-pull output on PC13, PC14 and/or PC15
+ * @note PC13, PC14 and/or PC15 are controlled by the GPIO configuration registers.
+ * Consequently PC13, PC14 and/or PC15 are floating in Standby mode.
+ * @rmtoll TAFCR PC13MODE LL_RTC_DisablePushPullMode\n
+ * TAFCR PC14MODE LL_RTC_DisablePushPullMode\n
+ * TAFCR PC15MODE LL_RTC_DisablePushPullMode
+ * @param RTCx RTC Instance
+ * @param PinMask This parameter can be a combination of the following values:
+ * @arg @ref LL_RTC_PIN_PC13
+ * @arg @ref LL_RTC_PIN_PC14
+ * @arg @ref LL_RTC_PIN_PC15
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_DisablePushPullMode(RTC_TypeDef *RTCx, uint32_t PinMask)
+{
+ CLEAR_BIT(RTCx->TAFCR, PinMask);
+}
+
+/**
+ * @brief Set PC14 and/or PC15 to high level.
+ * @note Output data configuration is possible if the LSE is disabled and PushPull output is enabled (through @ref LL_RTC_EnablePushPullMode)
+ * @rmtoll TAFCR PC14VALUE LL_RTC_SetOutputPin\n
+ * TAFCR PC15VALUE LL_RTC_SetOutputPin
+ * @param RTCx RTC Instance
+ * @param PinMask This parameter can be a combination of the following values:
+ * @arg @ref LL_RTC_PIN_PC14
+ * @arg @ref LL_RTC_PIN_PC15
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_SetOutputPin(RTC_TypeDef *RTCx, uint32_t PinMask)
+{
+ SET_BIT(RTCx->TAFCR, (PinMask >> 1));
+}
+
+/**
+ * @brief Set PC14 and/or PC15 to low level.
+ * @note Output data configuration is possible if the LSE is disabled and PushPull output is enabled (through @ref LL_RTC_EnablePushPullMode)
+ * @rmtoll TAFCR PC14VALUE LL_RTC_ResetOutputPin\n
+ * TAFCR PC15VALUE LL_RTC_ResetOutputPin
+ * @param RTCx RTC Instance
+ * @param PinMask This parameter can be a combination of the following values:
+ * @arg @ref LL_RTC_PIN_PC14
+ * @arg @ref LL_RTC_PIN_PC15
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_ResetOutputPin(RTC_TypeDef *RTCx, uint32_t PinMask)
+{
+ CLEAR_BIT(RTCx->TAFCR, (PinMask >> 1));
+}
+
+/**
+ * @brief Enable initialization mode
+ * @note Initialization mode is used to program time and date register (RTC_TR and RTC_DR)
+ * and prescaler register (RTC_PRER).
+ * Counters are stopped and start counting from the new value when INIT is reset.
+ * @rmtoll ISR INIT LL_RTC_EnableInitMode
+ * @param RTCx RTC Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_EnableInitMode(RTC_TypeDef *RTCx)
+{
+ /* Set the Initialization mode */
+ WRITE_REG(RTCx->ISR, RTC_INIT_MASK);
+}
+
+/**
+ * @brief Disable initialization mode (Free running mode)
+ * @rmtoll ISR INIT LL_RTC_DisableInitMode
+ * @param RTCx RTC Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_DisableInitMode(RTC_TypeDef *RTCx)
+{
+ /* Exit Initialization mode */
+ WRITE_REG(RTCx->ISR, (uint32_t)~RTC_ISR_INIT);
+}
+
+/**
+ * @brief Set Output polarity (pin is low when ALRAF/ALRBF/WUTF is asserted)
+ * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before.
+ * @rmtoll CR POL LL_RTC_SetOutputPolarity
+ * @param RTCx RTC Instance
+ * @param Polarity This parameter can be one of the following values:
+ * @arg @ref LL_RTC_OUTPUTPOLARITY_PIN_HIGH
+ * @arg @ref LL_RTC_OUTPUTPOLARITY_PIN_LOW
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_SetOutputPolarity(RTC_TypeDef *RTCx, uint32_t Polarity)
+{
+ MODIFY_REG(RTCx->CR, RTC_CR_POL, Polarity);
+}
+
+/**
+ * @brief Get Output polarity
+ * @rmtoll CR POL LL_RTC_GetOutputPolarity
+ * @param RTCx RTC Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RTC_OUTPUTPOLARITY_PIN_HIGH
+ * @arg @ref LL_RTC_OUTPUTPOLARITY_PIN_LOW
+ */
+__STATIC_INLINE uint32_t LL_RTC_GetOutputPolarity(RTC_TypeDef *RTCx)
+{
+ return (uint32_t)(READ_BIT(RTCx->CR, RTC_CR_POL));
+}
+
+/**
+ * @brief Enable Bypass the shadow registers
+ * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before.
+ * @rmtoll CR BYPSHAD LL_RTC_EnableShadowRegBypass
+ * @param RTCx RTC Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_EnableShadowRegBypass(RTC_TypeDef *RTCx)
+{
+ SET_BIT(RTCx->CR, RTC_CR_BYPSHAD);
+}
+
+/**
+ * @brief Disable Bypass the shadow registers
+ * @rmtoll CR BYPSHAD LL_RTC_DisableShadowRegBypass
+ * @param RTCx RTC Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_DisableShadowRegBypass(RTC_TypeDef *RTCx)
+{
+ CLEAR_BIT(RTCx->CR, RTC_CR_BYPSHAD);
+}
+
+/**
+ * @brief Check if Shadow registers bypass is enabled or not.
+ * @rmtoll CR BYPSHAD LL_RTC_IsShadowRegBypassEnabled
+ * @param RTCx RTC Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RTC_IsShadowRegBypassEnabled(RTC_TypeDef *RTCx)
+{
+ return (READ_BIT(RTCx->CR, RTC_CR_BYPSHAD) == (RTC_CR_BYPSHAD));
+}
+
+/**
+ * @brief Enable RTC_REFIN reference clock detection (50 or 60 Hz)
+ * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before.
+ * @note It can be written in initialization mode only (@ref LL_RTC_EnableInitMode function)
+ * @rmtoll CR REFCKON LL_RTC_EnableRefClock
+ * @param RTCx RTC Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_EnableRefClock(RTC_TypeDef *RTCx)
+{
+ SET_BIT(RTCx->CR, RTC_CR_REFCKON);
+}
+
+/**
+ * @brief Disable RTC_REFIN reference clock detection (50 or 60 Hz)
+ * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before.
+ * @note It can be written in initialization mode only (@ref LL_RTC_EnableInitMode function)
+ * @rmtoll CR REFCKON LL_RTC_DisableRefClock
+ * @param RTCx RTC Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_DisableRefClock(RTC_TypeDef *RTCx)
+{
+ CLEAR_BIT(RTCx->CR, RTC_CR_REFCKON);
+}
+
+/**
+ * @brief Set Asynchronous prescaler factor
+ * @rmtoll PRER PREDIV_A LL_RTC_SetAsynchPrescaler
+ * @param RTCx RTC Instance
+ * @param AsynchPrescaler Value between Min_Data = 0 and Max_Data = 0x7F
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_SetAsynchPrescaler(RTC_TypeDef *RTCx, uint32_t AsynchPrescaler)
+{
+ MODIFY_REG(RTCx->PRER, RTC_PRER_PREDIV_A, AsynchPrescaler << RTC_PRER_PREDIV_A_Pos);
+}
+
+/**
+ * @brief Set Synchronous prescaler factor
+ * @rmtoll PRER PREDIV_S LL_RTC_SetSynchPrescaler
+ * @param RTCx RTC Instance
+ * @param SynchPrescaler Value between Min_Data = 0 and Max_Data = 0x7FFF
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_SetSynchPrescaler(RTC_TypeDef *RTCx, uint32_t SynchPrescaler)
+{
+ MODIFY_REG(RTCx->PRER, RTC_PRER_PREDIV_S, SynchPrescaler);
+}
+
+/**
+ * @brief Get Asynchronous prescaler factor
+ * @rmtoll PRER PREDIV_A LL_RTC_GetAsynchPrescaler
+ * @param RTCx RTC Instance
+ * @retval Value between Min_Data = 0 and Max_Data = 0x7F
+ */
+__STATIC_INLINE uint32_t LL_RTC_GetAsynchPrescaler(RTC_TypeDef *RTCx)
+{
+ return (uint32_t)(READ_BIT(RTCx->PRER, RTC_PRER_PREDIV_A) >> RTC_PRER_PREDIV_A_Pos);
+}
+
+/**
+ * @brief Get Synchronous prescaler factor
+ * @rmtoll PRER PREDIV_S LL_RTC_GetSynchPrescaler
+ * @param RTCx RTC Instance
+ * @retval Value between Min_Data = 0 and Max_Data = 0x7FFF
+ */
+__STATIC_INLINE uint32_t LL_RTC_GetSynchPrescaler(RTC_TypeDef *RTCx)
+{
+ return (uint32_t)(READ_BIT(RTCx->PRER, RTC_PRER_PREDIV_S));
+}
+
+/**
+ * @brief Enable the write protection for RTC registers.
+ * @rmtoll WPR KEY LL_RTC_EnableWriteProtection
+ * @param RTCx RTC Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_EnableWriteProtection(RTC_TypeDef *RTCx)
+{
+ WRITE_REG(RTCx->WPR, RTC_WRITE_PROTECTION_DISABLE);
+}
+
+/**
+ * @brief Disable the write protection for RTC registers.
+ * @rmtoll WPR KEY LL_RTC_DisableWriteProtection
+ * @param RTCx RTC Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_DisableWriteProtection(RTC_TypeDef *RTCx)
+{
+ WRITE_REG(RTCx->WPR, RTC_WRITE_PROTECTION_ENABLE_1);
+ WRITE_REG(RTCx->WPR, RTC_WRITE_PROTECTION_ENABLE_2);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup RTC_LL_EF_Time Time
+ * @{
+ */
+
+/**
+ * @brief Set time format (AM/24-hour or PM notation)
+ * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before.
+ * @note It can be written in initialization mode only (@ref LL_RTC_EnableInitMode function)
+ * @rmtoll TR PM LL_RTC_TIME_SetFormat
+ * @param RTCx RTC Instance
+ * @param TimeFormat This parameter can be one of the following values:
+ * @arg @ref LL_RTC_TIME_FORMAT_AM_OR_24
+ * @arg @ref LL_RTC_TIME_FORMAT_PM
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_TIME_SetFormat(RTC_TypeDef *RTCx, uint32_t TimeFormat)
+{
+ MODIFY_REG(RTCx->TR, RTC_TR_PM, TimeFormat);
+}
+
+/**
+ * @brief Get time format (AM or PM notation)
+ * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set
+ * before reading this bit
+ * @note Read either RTC_SSR or RTC_TR locks the values in the higher-order calendar
+ * shadow registers until RTC_DR is read (LL_RTC_ReadReg(RTC, DR)).
+ * @rmtoll TR PM LL_RTC_TIME_GetFormat
+ * @param RTCx RTC Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RTC_TIME_FORMAT_AM_OR_24
+ * @arg @ref LL_RTC_TIME_FORMAT_PM
+ */
+__STATIC_INLINE uint32_t LL_RTC_TIME_GetFormat(RTC_TypeDef *RTCx)
+{
+ return (uint32_t)(READ_BIT(RTCx->TR, RTC_TR_PM));
+}
+
+/**
+ * @brief Set Hours in BCD format
+ * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before.
+ * @note It can be written in initialization mode only (@ref LL_RTC_EnableInitMode function)
+ * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert hour from binary to BCD format
+ * @rmtoll TR HT LL_RTC_TIME_SetHour\n
+ * TR HU LL_RTC_TIME_SetHour
+ * @param RTCx RTC Instance
+ * @param Hours Value between Min_Data=0x01 and Max_Data=0x12 or between Min_Data=0x00 and Max_Data=0x23
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_TIME_SetHour(RTC_TypeDef *RTCx, uint32_t Hours)
+{
+ MODIFY_REG(RTCx->TR, (RTC_TR_HT | RTC_TR_HU),
+ (((Hours & 0xF0U) << (RTC_TR_HT_Pos - 4U)) | ((Hours & 0x0FU) << RTC_TR_HU_Pos)));
+}
+
+/**
+ * @brief Get Hours in BCD format
+ * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set
+ * before reading this bit
+ * @note Read either RTC_SSR or RTC_TR locks the values in the higher-order calendar
+ * shadow registers until RTC_DR is read (LL_RTC_ReadReg(RTC, DR)).
+ * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert hour from BCD to
+ * Binary format
+ * @rmtoll TR HT LL_RTC_TIME_GetHour\n
+ * TR HU LL_RTC_TIME_GetHour
+ * @param RTCx RTC Instance
+ * @retval Value between Min_Data=0x01 and Max_Data=0x12 or between Min_Data=0x00 and Max_Data=0x23
+ */
+__STATIC_INLINE uint32_t LL_RTC_TIME_GetHour(RTC_TypeDef *RTCx)
+{
+ return (uint32_t)((READ_BIT(RTCx->TR, (RTC_TR_HT | RTC_TR_HU))) >> RTC_TR_HU_Pos);
+}
+
+/**
+ * @brief Set Minutes in BCD format
+ * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before.
+ * @note It can be written in initialization mode only (@ref LL_RTC_EnableInitMode function)
+ * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Minutes from binary to BCD format
+ * @rmtoll TR MNT LL_RTC_TIME_SetMinute\n
+ * TR MNU LL_RTC_TIME_SetMinute
+ * @param RTCx RTC Instance
+ * @param Minutes Value between Min_Data=0x00 and Max_Data=0x59
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_TIME_SetMinute(RTC_TypeDef *RTCx, uint32_t Minutes)
+{
+ MODIFY_REG(RTCx->TR, (RTC_TR_MNT | RTC_TR_MNU),
+ (((Minutes & 0xF0U) << (RTC_TR_MNT_Pos - 4U)) | ((Minutes & 0x0FU) << RTC_TR_MNU_Pos)));
+}
+
+/**
+ * @brief Get Minutes in BCD format
+ * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set
+ * before reading this bit
+ * @note Read either RTC_SSR or RTC_TR locks the values in the higher-order calendar
+ * shadow registers until RTC_DR is read (LL_RTC_ReadReg(RTC, DR)).
+ * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert minute from BCD
+ * to Binary format
+ * @rmtoll TR MNT LL_RTC_TIME_GetMinute\n
+ * TR MNU LL_RTC_TIME_GetMinute
+ * @param RTCx RTC Instance
+ * @retval Value between Min_Data=0x00 and Max_Data=0x59
+ */
+__STATIC_INLINE uint32_t LL_RTC_TIME_GetMinute(RTC_TypeDef *RTCx)
+{
+ return (uint32_t)((READ_BIT(RTCx->TR, (RTC_TR_MNT | RTC_TR_MNU))) >> RTC_TR_MNU_Pos);
+}
+
+/**
+ * @brief Set Seconds in BCD format
+ * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before.
+ * @note It can be written in initialization mode only (@ref LL_RTC_EnableInitMode function)
+ * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Seconds from binary to BCD format
+ * @rmtoll TR ST LL_RTC_TIME_SetSecond\n
+ * TR SU LL_RTC_TIME_SetSecond
+ * @param RTCx RTC Instance
+ * @param Seconds Value between Min_Data=0x00 and Max_Data=0x59
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_TIME_SetSecond(RTC_TypeDef *RTCx, uint32_t Seconds)
+{
+ MODIFY_REG(RTCx->TR, (RTC_TR_ST | RTC_TR_SU),
+ (((Seconds & 0xF0U) << (RTC_TR_ST_Pos - 4U)) | ((Seconds & 0x0FU) << RTC_TR_SU_Pos)));
+}
+
+/**
+ * @brief Get Seconds in BCD format
+ * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set
+ * before reading this bit
+ * @note Read either RTC_SSR or RTC_TR locks the values in the higher-order calendar
+ * shadow registers until RTC_DR is read (LL_RTC_ReadReg(RTC, DR)).
+ * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Seconds from BCD
+ * to Binary format
+ * @rmtoll TR ST LL_RTC_TIME_GetSecond\n
+ * TR SU LL_RTC_TIME_GetSecond
+ * @param RTCx RTC Instance
+ * @retval Value between Min_Data=0x00 and Max_Data=0x59
+ */
+__STATIC_INLINE uint32_t LL_RTC_TIME_GetSecond(RTC_TypeDef *RTCx)
+{
+ return (uint32_t)((READ_BIT(RTCx->TR, (RTC_TR_ST | RTC_TR_SU))) >> RTC_TR_SU_Pos);
+}
+
+/**
+ * @brief Set time (hour, minute and second) in BCD format
+ * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before.
+ * @note It can be written in initialization mode only (@ref LL_RTC_EnableInitMode function)
+ * @note TimeFormat and Hours should follow the same format
+ * @rmtoll TR PM LL_RTC_TIME_Config\n
+ * TR HT LL_RTC_TIME_Config\n
+ * TR HU LL_RTC_TIME_Config\n
+ * TR MNT LL_RTC_TIME_Config\n
+ * TR MNU LL_RTC_TIME_Config\n
+ * TR ST LL_RTC_TIME_Config\n
+ * TR SU LL_RTC_TIME_Config
+ * @param RTCx RTC Instance
+ * @param Format12_24 This parameter can be one of the following values:
+ * @arg @ref LL_RTC_TIME_FORMAT_AM_OR_24
+ * @arg @ref LL_RTC_TIME_FORMAT_PM
+ * @param Hours Value between Min_Data=0x01 and Max_Data=0x12 or between Min_Data=0x00 and Max_Data=0x23
+ * @param Minutes Value between Min_Data=0x00 and Max_Data=0x59
+ * @param Seconds Value between Min_Data=0x00 and Max_Data=0x59
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_TIME_Config(RTC_TypeDef *RTCx, uint32_t Format12_24, uint32_t Hours, uint32_t Minutes, uint32_t Seconds)
+{
+ register uint32_t temp = 0U;
+
+ temp = Format12_24 | \
+ (((Hours & 0xF0U) << (RTC_TR_HT_Pos - 4U)) | ((Hours & 0x0FU) << RTC_TR_HU_Pos)) | \
+ (((Minutes & 0xF0U) << (RTC_TR_MNT_Pos - 4U)) | ((Minutes & 0x0FU) << RTC_TR_MNU_Pos)) | \
+ (((Seconds & 0xF0U) << (RTC_TR_ST_Pos - 4U)) | ((Seconds & 0x0FU) << RTC_TR_SU_Pos));
+ MODIFY_REG(RTCx->TR, (RTC_TR_PM | RTC_TR_HT | RTC_TR_HU | RTC_TR_MNT | RTC_TR_MNU | RTC_TR_ST | RTC_TR_SU), temp);
+}
+
+/**
+ * @brief Get time (hour, minute and second) in BCD format
+ * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set
+ * before reading this bit
+ * @note Read either RTC_SSR or RTC_TR locks the values in the higher-order calendar
+ * shadow registers until RTC_DR is read (LL_RTC_ReadReg(RTC, DR)).
+ * @note helper macros __LL_RTC_GET_HOUR, __LL_RTC_GET_MINUTE and __LL_RTC_GET_SECOND
+ * are available to get independently each parameter.
+ * @rmtoll TR HT LL_RTC_TIME_Get\n
+ * TR HU LL_RTC_TIME_Get\n
+ * TR MNT LL_RTC_TIME_Get\n
+ * TR MNU LL_RTC_TIME_Get\n
+ * TR ST LL_RTC_TIME_Get\n
+ * TR SU LL_RTC_TIME_Get
+ * @param RTCx RTC Instance
+ * @retval Combination of hours, minutes and seconds (Format: 0x00HHMMSS).
+ */
+__STATIC_INLINE uint32_t LL_RTC_TIME_Get(RTC_TypeDef *RTCx)
+{
+ register uint32_t temp = 0U;
+
+ temp = READ_BIT(RTCx->TR, (RTC_TR_HT | RTC_TR_HU | RTC_TR_MNT | RTC_TR_MNU | RTC_TR_ST | RTC_TR_SU));
+ return (uint32_t)((((((temp & RTC_TR_HT) >> RTC_TR_HT_Pos) << 4U) | ((temp & RTC_TR_HU) >> RTC_TR_HU_Pos)) << RTC_OFFSET_HOUR) | \
+ (((((temp & RTC_TR_MNT) >> RTC_TR_MNT_Pos) << 4U) | ((temp & RTC_TR_MNU) >> RTC_TR_MNU_Pos)) << RTC_OFFSET_MINUTE) | \
+ ((((temp & RTC_TR_ST) >> RTC_TR_ST_Pos) << 4U) | ((temp & RTC_TR_SU) >> RTC_TR_SU_Pos)));
+}
+
+/**
+ * @brief Memorize whether the daylight saving time change has been performed
+ * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before.
+ * @rmtoll CR BKP LL_RTC_TIME_EnableDayLightStore
+ * @param RTCx RTC Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_TIME_EnableDayLightStore(RTC_TypeDef *RTCx)
+{
+ SET_BIT(RTCx->CR, RTC_CR_BKP);
+}
+
+/**
+ * @brief Disable memorization whether the daylight saving time change has been performed.
+ * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before.
+ * @rmtoll CR BKP LL_RTC_TIME_DisableDayLightStore
+ * @param RTCx RTC Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_TIME_DisableDayLightStore(RTC_TypeDef *RTCx)
+{
+ CLEAR_BIT(RTCx->CR, RTC_CR_BKP);
+}
+
+/**
+ * @brief Check if RTC Day Light Saving stored operation has been enabled or not
+ * @rmtoll CR BKP LL_RTC_TIME_IsDayLightStoreEnabled
+ * @param RTCx RTC Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RTC_TIME_IsDayLightStoreEnabled(RTC_TypeDef *RTCx)
+{
+ return (READ_BIT(RTCx->CR, RTC_CR_BKP) == (RTC_CR_BKP));
+}
+
+/**
+ * @brief Subtract 1 hour (winter time change)
+ * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before.
+ * @rmtoll CR SUB1H LL_RTC_TIME_DecHour
+ * @param RTCx RTC Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_TIME_DecHour(RTC_TypeDef *RTCx)
+{
+ SET_BIT(RTCx->CR, RTC_CR_SUB1H);
+}
+
+/**
+ * @brief Add 1 hour (summer time change)
+ * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before.
+ * @rmtoll CR ADD1H LL_RTC_TIME_IncHour
+ * @param RTCx RTC Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_TIME_IncHour(RTC_TypeDef *RTCx)
+{
+ SET_BIT(RTCx->CR, RTC_CR_ADD1H);
+}
+
+/**
+ * @brief Get Sub second value in the synchronous prescaler counter.
+ * @note You can use both SubSeconds value and SecondFraction (PREDIV_S through
+ * LL_RTC_GetSynchPrescaler function) terms returned to convert Calendar
+ * SubSeconds value in second fraction ratio with time unit following
+ * generic formula:
+ * ==> Seconds fraction ratio * time_unit= [(SecondFraction-SubSeconds)/(SecondFraction+1)] * time_unit
+ * This conversion can be performed only if no shift operation is pending
+ * (ie. SHFP=0) when PREDIV_S >= SS.
+ * @rmtoll SSR SS LL_RTC_TIME_GetSubSecond
+ * @param RTCx RTC Instance
+ * @retval Sub second value (number between 0 and 65535)
+ */
+__STATIC_INLINE uint32_t LL_RTC_TIME_GetSubSecond(RTC_TypeDef *RTCx)
+{
+ return (uint32_t)(READ_BIT(RTCx->SSR, RTC_SSR_SS));
+}
+
+/**
+ * @brief Synchronize to a remote clock with a high degree of precision.
+ * @note This operation effectively subtracts from (delays) or advance the clock of a fraction of a second.
+ * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before.
+ * @note When REFCKON is set, firmware must not write to Shift control register.
+ * @rmtoll SHIFTR ADD1S LL_RTC_TIME_Synchronize\n
+ * SHIFTR SUBFS LL_RTC_TIME_Synchronize
+ * @param RTCx RTC Instance
+ * @param ShiftSecond This parameter can be one of the following values:
+ * @arg @ref LL_RTC_SHIFT_SECOND_DELAY
+ * @arg @ref LL_RTC_SHIFT_SECOND_ADVANCE
+ * @param Fraction Number of Seconds Fractions (any value from 0 to 0x7FFF)
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_TIME_Synchronize(RTC_TypeDef *RTCx, uint32_t ShiftSecond, uint32_t Fraction)
+{
+ WRITE_REG(RTCx->SHIFTR, ShiftSecond | Fraction);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup RTC_LL_EF_Date Date
+ * @{
+ */
+
+/**
+ * @brief Set Year in BCD format
+ * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Year from binary to BCD format
+ * @rmtoll DR YT LL_RTC_DATE_SetYear\n
+ * DR YU LL_RTC_DATE_SetYear
+ * @param RTCx RTC Instance
+ * @param Year Value between Min_Data=0x00 and Max_Data=0x99
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_DATE_SetYear(RTC_TypeDef *RTCx, uint32_t Year)
+{
+ MODIFY_REG(RTCx->DR, (RTC_DR_YT | RTC_DR_YU),
+ (((Year & 0xF0U) << (RTC_DR_YT_Pos - 4U)) | ((Year & 0x0FU) << RTC_DR_YU_Pos)));
+}
+
+/**
+ * @brief Get Year in BCD format
+ * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set
+ * before reading this bit
+ * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Year from BCD to Binary format
+ * @rmtoll DR YT LL_RTC_DATE_GetYear\n
+ * DR YU LL_RTC_DATE_GetYear
+ * @param RTCx RTC Instance
+ * @retval Value between Min_Data=0x00 and Max_Data=0x99
+ */
+__STATIC_INLINE uint32_t LL_RTC_DATE_GetYear(RTC_TypeDef *RTCx)
+{
+ return (uint32_t)((READ_BIT(RTCx->DR, (RTC_DR_YT | RTC_DR_YU))) >> RTC_DR_YU_Pos);
+}
+
+/**
+ * @brief Set Week day
+ * @rmtoll DR WDU LL_RTC_DATE_SetWeekDay
+ * @param RTCx RTC Instance
+ * @param WeekDay This parameter can be one of the following values:
+ * @arg @ref LL_RTC_WEEKDAY_MONDAY
+ * @arg @ref LL_RTC_WEEKDAY_TUESDAY
+ * @arg @ref LL_RTC_WEEKDAY_WEDNESDAY
+ * @arg @ref LL_RTC_WEEKDAY_THURSDAY
+ * @arg @ref LL_RTC_WEEKDAY_FRIDAY
+ * @arg @ref LL_RTC_WEEKDAY_SATURDAY
+ * @arg @ref LL_RTC_WEEKDAY_SUNDAY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_DATE_SetWeekDay(RTC_TypeDef *RTCx, uint32_t WeekDay)
+{
+ MODIFY_REG(RTCx->DR, RTC_DR_WDU, WeekDay << RTC_DR_WDU_Pos);
+}
+
+/**
+ * @brief Get Week day
+ * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set
+ * before reading this bit
+ * @rmtoll DR WDU LL_RTC_DATE_GetWeekDay
+ * @param RTCx RTC Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RTC_WEEKDAY_MONDAY
+ * @arg @ref LL_RTC_WEEKDAY_TUESDAY
+ * @arg @ref LL_RTC_WEEKDAY_WEDNESDAY
+ * @arg @ref LL_RTC_WEEKDAY_THURSDAY
+ * @arg @ref LL_RTC_WEEKDAY_FRIDAY
+ * @arg @ref LL_RTC_WEEKDAY_SATURDAY
+ * @arg @ref LL_RTC_WEEKDAY_SUNDAY
+ */
+__STATIC_INLINE uint32_t LL_RTC_DATE_GetWeekDay(RTC_TypeDef *RTCx)
+{
+ return (uint32_t)(READ_BIT(RTCx->DR, RTC_DR_WDU) >> RTC_DR_WDU_Pos);
+}
+
+/**
+ * @brief Set Month in BCD format
+ * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Month from binary to BCD format
+ * @rmtoll DR MT LL_RTC_DATE_SetMonth\n
+ * DR MU LL_RTC_DATE_SetMonth
+ * @param RTCx RTC Instance
+ * @param Month This parameter can be one of the following values:
+ * @arg @ref LL_RTC_MONTH_JANUARY
+ * @arg @ref LL_RTC_MONTH_FEBRUARY
+ * @arg @ref LL_RTC_MONTH_MARCH
+ * @arg @ref LL_RTC_MONTH_APRIL
+ * @arg @ref LL_RTC_MONTH_MAY
+ * @arg @ref LL_RTC_MONTH_JUNE
+ * @arg @ref LL_RTC_MONTH_JULY
+ * @arg @ref LL_RTC_MONTH_AUGUST
+ * @arg @ref LL_RTC_MONTH_SEPTEMBER
+ * @arg @ref LL_RTC_MONTH_OCTOBER
+ * @arg @ref LL_RTC_MONTH_NOVEMBER
+ * @arg @ref LL_RTC_MONTH_DECEMBER
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_DATE_SetMonth(RTC_TypeDef *RTCx, uint32_t Month)
+{
+ MODIFY_REG(RTCx->DR, (RTC_DR_MT | RTC_DR_MU),
+ (((Month & 0xF0U) << (RTC_DR_MT_Pos - 4U)) | ((Month & 0x0FU) << RTC_DR_MU_Pos)));
+}
+
+/**
+ * @brief Get Month in BCD format
+ * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set
+ * before reading this bit
+ * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Month from BCD to Binary format
+ * @rmtoll DR MT LL_RTC_DATE_GetMonth\n
+ * DR MU LL_RTC_DATE_GetMonth
+ * @param RTCx RTC Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RTC_MONTH_JANUARY
+ * @arg @ref LL_RTC_MONTH_FEBRUARY
+ * @arg @ref LL_RTC_MONTH_MARCH
+ * @arg @ref LL_RTC_MONTH_APRIL
+ * @arg @ref LL_RTC_MONTH_MAY
+ * @arg @ref LL_RTC_MONTH_JUNE
+ * @arg @ref LL_RTC_MONTH_JULY
+ * @arg @ref LL_RTC_MONTH_AUGUST
+ * @arg @ref LL_RTC_MONTH_SEPTEMBER
+ * @arg @ref LL_RTC_MONTH_OCTOBER
+ * @arg @ref LL_RTC_MONTH_NOVEMBER
+ * @arg @ref LL_RTC_MONTH_DECEMBER
+ */
+__STATIC_INLINE uint32_t LL_RTC_DATE_GetMonth(RTC_TypeDef *RTCx)
+{
+ return (uint32_t)((READ_BIT(RTCx->DR, (RTC_DR_MT | RTC_DR_MU))) >> RTC_DR_MU_Pos);
+}
+
+/**
+ * @brief Set Day in BCD format
+ * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Day from binary to BCD format
+ * @rmtoll DR DT LL_RTC_DATE_SetDay\n
+ * DR DU LL_RTC_DATE_SetDay
+ * @param RTCx RTC Instance
+ * @param Day Value between Min_Data=0x01 and Max_Data=0x31
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_DATE_SetDay(RTC_TypeDef *RTCx, uint32_t Day)
+{
+ MODIFY_REG(RTCx->DR, (RTC_DR_DT | RTC_DR_DU),
+ (((Day & 0xF0U) << (RTC_DR_DT_Pos - 4U)) | ((Day & 0x0FU) << RTC_DR_DU_Pos)));
+}
+
+/**
+ * @brief Get Day in BCD format
+ * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set
+ * before reading this bit
+ * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Day from BCD to Binary format
+ * @rmtoll DR DT LL_RTC_DATE_GetDay\n
+ * DR DU LL_RTC_DATE_GetDay
+ * @param RTCx RTC Instance
+ * @retval Value between Min_Data=0x01 and Max_Data=0x31
+ */
+__STATIC_INLINE uint32_t LL_RTC_DATE_GetDay(RTC_TypeDef *RTCx)
+{
+ return (uint32_t)((READ_BIT(RTCx->DR, (RTC_DR_DT | RTC_DR_DU))) >> RTC_DR_DU_Pos);
+}
+
+/**
+ * @brief Set date (WeekDay, Day, Month and Year) in BCD format
+ * @rmtoll DR WDU LL_RTC_DATE_Config\n
+ * DR MT LL_RTC_DATE_Config\n
+ * DR MU LL_RTC_DATE_Config\n
+ * DR DT LL_RTC_DATE_Config\n
+ * DR DU LL_RTC_DATE_Config\n
+ * DR YT LL_RTC_DATE_Config\n
+ * DR YU LL_RTC_DATE_Config
+ * @param RTCx RTC Instance
+ * @param WeekDay This parameter can be one of the following values:
+ * @arg @ref LL_RTC_WEEKDAY_MONDAY
+ * @arg @ref LL_RTC_WEEKDAY_TUESDAY
+ * @arg @ref LL_RTC_WEEKDAY_WEDNESDAY
+ * @arg @ref LL_RTC_WEEKDAY_THURSDAY
+ * @arg @ref LL_RTC_WEEKDAY_FRIDAY
+ * @arg @ref LL_RTC_WEEKDAY_SATURDAY
+ * @arg @ref LL_RTC_WEEKDAY_SUNDAY
+ * @param Day Value between Min_Data=0x01 and Max_Data=0x31
+ * @param Month This parameter can be one of the following values:
+ * @arg @ref LL_RTC_MONTH_JANUARY
+ * @arg @ref LL_RTC_MONTH_FEBRUARY
+ * @arg @ref LL_RTC_MONTH_MARCH
+ * @arg @ref LL_RTC_MONTH_APRIL
+ * @arg @ref LL_RTC_MONTH_MAY
+ * @arg @ref LL_RTC_MONTH_JUNE
+ * @arg @ref LL_RTC_MONTH_JULY
+ * @arg @ref LL_RTC_MONTH_AUGUST
+ * @arg @ref LL_RTC_MONTH_SEPTEMBER
+ * @arg @ref LL_RTC_MONTH_OCTOBER
+ * @arg @ref LL_RTC_MONTH_NOVEMBER
+ * @arg @ref LL_RTC_MONTH_DECEMBER
+ * @param Year Value between Min_Data=0x00 and Max_Data=0x99
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_DATE_Config(RTC_TypeDef *RTCx, uint32_t WeekDay, uint32_t Day, uint32_t Month, uint32_t Year)
+{
+ register uint32_t temp = 0U;
+
+ temp = (WeekDay << RTC_DR_WDU_Pos) | \
+ (((Year & 0xF0U) << (RTC_DR_YT_Pos - 4U)) | ((Year & 0x0FU) << RTC_DR_YU_Pos)) | \
+ (((Month & 0xF0U) << (RTC_DR_MT_Pos - 4U)) | ((Month & 0x0FU) << RTC_DR_MU_Pos)) | \
+ (((Day & 0xF0U) << (RTC_DR_DT_Pos - 4U)) | ((Day & 0x0FU) << RTC_DR_DU_Pos));
+
+ MODIFY_REG(RTCx->DR, (RTC_DR_WDU | RTC_DR_MT | RTC_DR_MU | RTC_DR_DT | RTC_DR_DU | RTC_DR_YT | RTC_DR_YU), temp);
+}
+
+/**
+ * @brief Get date (WeekDay, Day, Month and Year) in BCD format
+ * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set
+ * before reading this bit
+ * @note helper macros __LL_RTC_GET_WEEKDAY, __LL_RTC_GET_YEAR, __LL_RTC_GET_MONTH,
+ * and __LL_RTC_GET_DAY are available to get independently each parameter.
+ * @rmtoll DR WDU LL_RTC_DATE_Get\n
+ * DR MT LL_RTC_DATE_Get\n
+ * DR MU LL_RTC_DATE_Get\n
+ * DR DT LL_RTC_DATE_Get\n
+ * DR DU LL_RTC_DATE_Get\n
+ * DR YT LL_RTC_DATE_Get\n
+ * DR YU LL_RTC_DATE_Get
+ * @param RTCx RTC Instance
+ * @retval Combination of WeekDay, Day, Month and Year (Format: 0xWWDDMMYY).
+ */
+__STATIC_INLINE uint32_t LL_RTC_DATE_Get(RTC_TypeDef *RTCx)
+{
+ register uint32_t temp = 0U;
+
+ temp = READ_BIT(RTCx->DR, (RTC_DR_WDU | RTC_DR_MT | RTC_DR_MU | RTC_DR_DT | RTC_DR_DU | RTC_DR_YT | RTC_DR_YU));
+ return (uint32_t)((((temp & RTC_DR_WDU) >> RTC_DR_WDU_Pos) << RTC_OFFSET_WEEKDAY) | \
+ (((((temp & RTC_DR_DT) >> RTC_DR_DT_Pos) << 4U) | ((temp & RTC_DR_DU) >> RTC_DR_DU_Pos)) << RTC_OFFSET_DAY) | \
+ (((((temp & RTC_DR_MT) >> RTC_DR_MT_Pos) << 4U) | ((temp & RTC_DR_MU) >> RTC_DR_MU_Pos)) << RTC_OFFSET_MONTH) | \
+ ((((temp & RTC_DR_YT) >> RTC_DR_YT_Pos) << 4U) | ((temp & RTC_DR_YU) >> RTC_DR_YU_Pos)));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup RTC_LL_EF_ALARMA ALARMA
+ * @{
+ */
+
+/**
+ * @brief Enable Alarm A
+ * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before.
+ * @rmtoll CR ALRAE LL_RTC_ALMA_Enable
+ * @param RTCx RTC Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_ALMA_Enable(RTC_TypeDef *RTCx)
+{
+ SET_BIT(RTCx->CR, RTC_CR_ALRAE);
+}
+
+/**
+ * @brief Disable Alarm A
+ * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before.
+ * @rmtoll CR ALRAE LL_RTC_ALMA_Disable
+ * @param RTCx RTC Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_ALMA_Disable(RTC_TypeDef *RTCx)
+{
+ CLEAR_BIT(RTCx->CR, RTC_CR_ALRAE);
+}
+
+/**
+ * @brief Specify the Alarm A masks.
+ * @rmtoll ALRMAR MSK4 LL_RTC_ALMA_SetMask\n
+ * ALRMAR MSK3 LL_RTC_ALMA_SetMask\n
+ * ALRMAR MSK2 LL_RTC_ALMA_SetMask\n
+ * ALRMAR MSK1 LL_RTC_ALMA_SetMask
+ * @param RTCx RTC Instance
+ * @param Mask This parameter can be a combination of the following values:
+ * @arg @ref LL_RTC_ALMA_MASK_NONE
+ * @arg @ref LL_RTC_ALMA_MASK_DATEWEEKDAY
+ * @arg @ref LL_RTC_ALMA_MASK_HOURS
+ * @arg @ref LL_RTC_ALMA_MASK_MINUTES
+ * @arg @ref LL_RTC_ALMA_MASK_SECONDS
+ * @arg @ref LL_RTC_ALMA_MASK_ALL
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_ALMA_SetMask(RTC_TypeDef *RTCx, uint32_t Mask)
+{
+ MODIFY_REG(RTCx->ALRMAR, RTC_ALRMAR_MSK4 | RTC_ALRMAR_MSK3 | RTC_ALRMAR_MSK2 | RTC_ALRMAR_MSK1, Mask);
+}
+
+/**
+ * @brief Get the Alarm A masks.
+ * @rmtoll ALRMAR MSK4 LL_RTC_ALMA_GetMask\n
+ * ALRMAR MSK3 LL_RTC_ALMA_GetMask\n
+ * ALRMAR MSK2 LL_RTC_ALMA_GetMask\n
+ * ALRMAR MSK1 LL_RTC_ALMA_GetMask
+ * @param RTCx RTC Instance
+ * @retval Returned value can be can be a combination of the following values:
+ * @arg @ref LL_RTC_ALMA_MASK_NONE
+ * @arg @ref LL_RTC_ALMA_MASK_DATEWEEKDAY
+ * @arg @ref LL_RTC_ALMA_MASK_HOURS
+ * @arg @ref LL_RTC_ALMA_MASK_MINUTES
+ * @arg @ref LL_RTC_ALMA_MASK_SECONDS
+ * @arg @ref LL_RTC_ALMA_MASK_ALL
+ */
+__STATIC_INLINE uint32_t LL_RTC_ALMA_GetMask(RTC_TypeDef *RTCx)
+{
+ return (uint32_t)(READ_BIT(RTCx->ALRMAR, RTC_ALRMAR_MSK4 | RTC_ALRMAR_MSK3 | RTC_ALRMAR_MSK2 | RTC_ALRMAR_MSK1));
+}
+
+/**
+ * @brief Enable AlarmA Week day selection (DU[3:0] represents the week day. DT[1:0] is do not care)
+ * @rmtoll ALRMAR WDSEL LL_RTC_ALMA_EnableWeekday
+ * @param RTCx RTC Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_ALMA_EnableWeekday(RTC_TypeDef *RTCx)
+{
+ SET_BIT(RTCx->ALRMAR, RTC_ALRMAR_WDSEL);
+}
+
+/**
+ * @brief Disable AlarmA Week day selection (DU[3:0] represents the date )
+ * @rmtoll ALRMAR WDSEL LL_RTC_ALMA_DisableWeekday
+ * @param RTCx RTC Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_ALMA_DisableWeekday(RTC_TypeDef *RTCx)
+{
+ CLEAR_BIT(RTCx->ALRMAR, RTC_ALRMAR_WDSEL);
+}
+
+/**
+ * @brief Set ALARM A Day in BCD format
+ * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Day from binary to BCD format
+ * @rmtoll ALRMAR DT LL_RTC_ALMA_SetDay\n
+ * ALRMAR DU LL_RTC_ALMA_SetDay
+ * @param RTCx RTC Instance
+ * @param Day Value between Min_Data=0x01 and Max_Data=0x31
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_ALMA_SetDay(RTC_TypeDef *RTCx, uint32_t Day)
+{
+ MODIFY_REG(RTCx->ALRMAR, (RTC_ALRMAR_DT | RTC_ALRMAR_DU),
+ (((Day & 0xF0U) << (RTC_ALRMAR_DT_Pos - 4U)) | ((Day & 0x0FU) << RTC_ALRMAR_DU_Pos)));
+}
+
+/**
+ * @brief Get ALARM A Day in BCD format
+ * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Day from BCD to Binary format
+ * @rmtoll ALRMAR DT LL_RTC_ALMA_GetDay\n
+ * ALRMAR DU LL_RTC_ALMA_GetDay
+ * @param RTCx RTC Instance
+ * @retval Value between Min_Data=0x01 and Max_Data=0x31
+ */
+__STATIC_INLINE uint32_t LL_RTC_ALMA_GetDay(RTC_TypeDef *RTCx)
+{
+ return (uint32_t)((READ_BIT(RTCx->ALRMAR, (RTC_ALRMAR_DT | RTC_ALRMAR_DU))) >> RTC_ALRMAR_DU_Pos);
+}
+
+/**
+ * @brief Set ALARM A Weekday
+ * @rmtoll ALRMAR DU LL_RTC_ALMA_SetWeekDay
+ * @param RTCx RTC Instance
+ * @param WeekDay This parameter can be one of the following values:
+ * @arg @ref LL_RTC_WEEKDAY_MONDAY
+ * @arg @ref LL_RTC_WEEKDAY_TUESDAY
+ * @arg @ref LL_RTC_WEEKDAY_WEDNESDAY
+ * @arg @ref LL_RTC_WEEKDAY_THURSDAY
+ * @arg @ref LL_RTC_WEEKDAY_FRIDAY
+ * @arg @ref LL_RTC_WEEKDAY_SATURDAY
+ * @arg @ref LL_RTC_WEEKDAY_SUNDAY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_ALMA_SetWeekDay(RTC_TypeDef *RTCx, uint32_t WeekDay)
+{
+ MODIFY_REG(RTCx->ALRMAR, RTC_ALRMAR_DU, WeekDay << RTC_ALRMAR_DU_Pos);
+}
+
+/**
+ * @brief Get ALARM A Weekday
+ * @rmtoll ALRMAR DU LL_RTC_ALMA_GetWeekDay
+ * @param RTCx RTC Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RTC_WEEKDAY_MONDAY
+ * @arg @ref LL_RTC_WEEKDAY_TUESDAY
+ * @arg @ref LL_RTC_WEEKDAY_WEDNESDAY
+ * @arg @ref LL_RTC_WEEKDAY_THURSDAY
+ * @arg @ref LL_RTC_WEEKDAY_FRIDAY
+ * @arg @ref LL_RTC_WEEKDAY_SATURDAY
+ * @arg @ref LL_RTC_WEEKDAY_SUNDAY
+ */
+__STATIC_INLINE uint32_t LL_RTC_ALMA_GetWeekDay(RTC_TypeDef *RTCx)
+{
+ return (uint32_t)(READ_BIT(RTCx->ALRMAR, RTC_ALRMAR_DU) >> RTC_ALRMAR_DU_Pos);
+}
+
+/**
+ * @brief Set Alarm A time format (AM/24-hour or PM notation)
+ * @rmtoll ALRMAR PM LL_RTC_ALMA_SetTimeFormat
+ * @param RTCx RTC Instance
+ * @param TimeFormat This parameter can be one of the following values:
+ * @arg @ref LL_RTC_ALMA_TIME_FORMAT_AM
+ * @arg @ref LL_RTC_ALMA_TIME_FORMAT_PM
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_ALMA_SetTimeFormat(RTC_TypeDef *RTCx, uint32_t TimeFormat)
+{
+ MODIFY_REG(RTCx->ALRMAR, RTC_ALRMAR_PM, TimeFormat);
+}
+
+/**
+ * @brief Get Alarm A time format (AM or PM notation)
+ * @rmtoll ALRMAR PM LL_RTC_ALMA_GetTimeFormat
+ * @param RTCx RTC Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RTC_ALMA_TIME_FORMAT_AM
+ * @arg @ref LL_RTC_ALMA_TIME_FORMAT_PM
+ */
+__STATIC_INLINE uint32_t LL_RTC_ALMA_GetTimeFormat(RTC_TypeDef *RTCx)
+{
+ return (uint32_t)(READ_BIT(RTCx->ALRMAR, RTC_ALRMAR_PM));
+}
+
+/**
+ * @brief Set ALARM A Hours in BCD format
+ * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Hours from binary to BCD format
+ * @rmtoll ALRMAR HT LL_RTC_ALMA_SetHour\n
+ * ALRMAR HU LL_RTC_ALMA_SetHour
+ * @param RTCx RTC Instance
+ * @param Hours Value between Min_Data=0x01 and Max_Data=0x12 or between Min_Data=0x00 and Max_Data=0x23
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_ALMA_SetHour(RTC_TypeDef *RTCx, uint32_t Hours)
+{
+ MODIFY_REG(RTCx->ALRMAR, (RTC_ALRMAR_HT | RTC_ALRMAR_HU),
+ (((Hours & 0xF0U) << (RTC_ALRMAR_HT_Pos - 4U)) | ((Hours & 0x0FU) << RTC_ALRMAR_HU_Pos)));
+}
+
+/**
+ * @brief Get ALARM A Hours in BCD format
+ * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Hours from BCD to Binary format
+ * @rmtoll ALRMAR HT LL_RTC_ALMA_GetHour\n
+ * ALRMAR HU LL_RTC_ALMA_GetHour
+ * @param RTCx RTC Instance
+ * @retval Value between Min_Data=0x01 and Max_Data=0x12 or between Min_Data=0x00 and Max_Data=0x23
+ */
+__STATIC_INLINE uint32_t LL_RTC_ALMA_GetHour(RTC_TypeDef *RTCx)
+{
+ return (uint32_t)((READ_BIT(RTCx->ALRMAR, (RTC_ALRMAR_HT | RTC_ALRMAR_HU))) >> RTC_ALRMAR_HU_Pos);
+}
+
+/**
+ * @brief Set ALARM A Minutes in BCD format
+ * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Minutes from binary to BCD format
+ * @rmtoll ALRMAR MNT LL_RTC_ALMA_SetMinute\n
+ * ALRMAR MNU LL_RTC_ALMA_SetMinute
+ * @param RTCx RTC Instance
+ * @param Minutes Value between Min_Data=0x00 and Max_Data=0x59
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_ALMA_SetMinute(RTC_TypeDef *RTCx, uint32_t Minutes)
+{
+ MODIFY_REG(RTCx->ALRMAR, (RTC_ALRMAR_MNT | RTC_ALRMAR_MNU),
+ (((Minutes & 0xF0U) << (RTC_ALRMAR_MNT_Pos - 4U)) | ((Minutes & 0x0FU) << RTC_ALRMAR_MNU_Pos)));
+}
+
+/**
+ * @brief Get ALARM A Minutes in BCD format
+ * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Minutes from BCD to Binary format
+ * @rmtoll ALRMAR MNT LL_RTC_ALMA_GetMinute\n
+ * ALRMAR MNU LL_RTC_ALMA_GetMinute
+ * @param RTCx RTC Instance
+ * @retval Value between Min_Data=0x00 and Max_Data=0x59
+ */
+__STATIC_INLINE uint32_t LL_RTC_ALMA_GetMinute(RTC_TypeDef *RTCx)
+{
+ return (uint32_t)((READ_BIT(RTCx->ALRMAR, (RTC_ALRMAR_MNT | RTC_ALRMAR_MNU))) >> RTC_ALRMAR_MNU_Pos);
+}
+
+/**
+ * @brief Set ALARM A Seconds in BCD format
+ * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Seconds from binary to BCD format
+ * @rmtoll ALRMAR ST LL_RTC_ALMA_SetSecond\n
+ * ALRMAR SU LL_RTC_ALMA_SetSecond
+ * @param RTCx RTC Instance
+ * @param Seconds Value between Min_Data=0x00 and Max_Data=0x59
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_ALMA_SetSecond(RTC_TypeDef *RTCx, uint32_t Seconds)
+{
+ MODIFY_REG(RTCx->ALRMAR, (RTC_ALRMAR_ST | RTC_ALRMAR_SU),
+ (((Seconds & 0xF0U) << (RTC_ALRMAR_ST_Pos - 4U)) | ((Seconds & 0x0FU) << RTC_ALRMAR_SU_Pos)));
+}
+
+/**
+ * @brief Get ALARM A Seconds in BCD format
+ * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Seconds from BCD to Binary format
+ * @rmtoll ALRMAR ST LL_RTC_ALMA_GetSecond\n
+ * ALRMAR SU LL_RTC_ALMA_GetSecond
+ * @param RTCx RTC Instance
+ * @retval Value between Min_Data=0x00 and Max_Data=0x59
+ */
+__STATIC_INLINE uint32_t LL_RTC_ALMA_GetSecond(RTC_TypeDef *RTCx)
+{
+ return (uint32_t)((READ_BIT(RTCx->ALRMAR, (RTC_ALRMAR_ST | RTC_ALRMAR_SU))) >> RTC_ALRMAR_SU_Pos);
+}
+
+/**
+ * @brief Set Alarm A Time (hour, minute and second) in BCD format
+ * @rmtoll ALRMAR PM LL_RTC_ALMA_ConfigTime\n
+ * ALRMAR HT LL_RTC_ALMA_ConfigTime\n
+ * ALRMAR HU LL_RTC_ALMA_ConfigTime\n
+ * ALRMAR MNT LL_RTC_ALMA_ConfigTime\n
+ * ALRMAR MNU LL_RTC_ALMA_ConfigTime\n
+ * ALRMAR ST LL_RTC_ALMA_ConfigTime\n
+ * ALRMAR SU LL_RTC_ALMA_ConfigTime
+ * @param RTCx RTC Instance
+ * @param Format12_24 This parameter can be one of the following values:
+ * @arg @ref LL_RTC_ALMA_TIME_FORMAT_AM
+ * @arg @ref LL_RTC_ALMA_TIME_FORMAT_PM
+ * @param Hours Value between Min_Data=0x01 and Max_Data=0x12 or between Min_Data=0x00 and Max_Data=0x23
+ * @param Minutes Value between Min_Data=0x00 and Max_Data=0x59
+ * @param Seconds Value between Min_Data=0x00 and Max_Data=0x59
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_ALMA_ConfigTime(RTC_TypeDef *RTCx, uint32_t Format12_24, uint32_t Hours, uint32_t Minutes, uint32_t Seconds)
+{
+ register uint32_t temp = 0U;
+
+ temp = Format12_24 | (((Hours & 0xF0U) << (RTC_ALRMAR_HT_Pos - 4U)) | ((Hours & 0x0FU) << RTC_ALRMAR_HU_Pos)) | \
+ (((Minutes & 0xF0U) << (RTC_ALRMAR_MNT_Pos - 4U)) | ((Minutes & 0x0FU) << RTC_ALRMAR_MNU_Pos)) | \
+ (((Seconds & 0xF0U) << (RTC_ALRMAR_ST_Pos - 4U)) | ((Seconds & 0x0FU) << RTC_ALRMAR_SU_Pos));
+
+ MODIFY_REG(RTCx->ALRMAR, RTC_ALRMAR_PM | RTC_ALRMAR_HT | RTC_ALRMAR_HU | RTC_ALRMAR_MNT | RTC_ALRMAR_MNU | RTC_ALRMAR_ST | RTC_ALRMAR_SU, temp);
+}
+
+/**
+ * @brief Get Alarm B Time (hour, minute and second) in BCD format
+ * @note helper macros __LL_RTC_GET_HOUR, __LL_RTC_GET_MINUTE and __LL_RTC_GET_SECOND
+ * are available to get independently each parameter.
+ * @rmtoll ALRMAR HT LL_RTC_ALMA_GetTime\n
+ * ALRMAR HU LL_RTC_ALMA_GetTime\n
+ * ALRMAR MNT LL_RTC_ALMA_GetTime\n
+ * ALRMAR MNU LL_RTC_ALMA_GetTime\n
+ * ALRMAR ST LL_RTC_ALMA_GetTime\n
+ * ALRMAR SU LL_RTC_ALMA_GetTime
+ * @param RTCx RTC Instance
+ * @retval Combination of hours, minutes and seconds.
+ */
+__STATIC_INLINE uint32_t LL_RTC_ALMA_GetTime(RTC_TypeDef *RTCx)
+{
+ return (uint32_t)((LL_RTC_ALMA_GetHour(RTCx) << RTC_OFFSET_HOUR) | (LL_RTC_ALMA_GetMinute(RTCx) << RTC_OFFSET_MINUTE) | LL_RTC_ALMA_GetSecond(RTCx));
+}
+
+/**
+ * @brief Set Alarm A Mask the most-significant bits starting at this bit
+ * @note This register can be written only when ALRAE is reset in RTC_CR register,
+ * or in initialization mode.
+ * @rmtoll ALRMASSR MASKSS LL_RTC_ALMA_SetSubSecondMask
+ * @param RTCx RTC Instance
+ * @param Mask Value between Min_Data=0x00 and Max_Data=0xF
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_ALMA_SetSubSecondMask(RTC_TypeDef *RTCx, uint32_t Mask)
+{
+ MODIFY_REG(RTCx->ALRMASSR, RTC_ALRMASSR_MASKSS, Mask << RTC_ALRMASSR_MASKSS_Pos);
+}
+
+/**
+ * @brief Get Alarm A Mask the most-significant bits starting at this bit
+ * @rmtoll ALRMASSR MASKSS LL_RTC_ALMA_GetSubSecondMask
+ * @param RTCx RTC Instance
+ * @retval Value between Min_Data=0x00 and Max_Data=0xF
+ */
+__STATIC_INLINE uint32_t LL_RTC_ALMA_GetSubSecondMask(RTC_TypeDef *RTCx)
+{
+ return (uint32_t)(READ_BIT(RTCx->ALRMASSR, RTC_ALRMASSR_MASKSS) >> RTC_ALRMASSR_MASKSS_Pos);
+}
+
+/**
+ * @brief Set Alarm A Sub seconds value
+ * @rmtoll ALRMASSR SS LL_RTC_ALMA_SetSubSecond
+ * @param RTCx RTC Instance
+ * @param Subsecond Value between Min_Data=0x00 and Max_Data=0x7FFF
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_ALMA_SetSubSecond(RTC_TypeDef *RTCx, uint32_t Subsecond)
+{
+ MODIFY_REG(RTCx->ALRMASSR, RTC_ALRMASSR_SS, Subsecond);
+}
+
+/**
+ * @brief Get Alarm A Sub seconds value
+ * @rmtoll ALRMASSR SS LL_RTC_ALMA_GetSubSecond
+ * @param RTCx RTC Instance
+ * @retval Value between Min_Data=0x00 and Max_Data=0x7FFF
+ */
+__STATIC_INLINE uint32_t LL_RTC_ALMA_GetSubSecond(RTC_TypeDef *RTCx)
+{
+ return (uint32_t)(READ_BIT(RTCx->ALRMASSR, RTC_ALRMASSR_SS));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup RTC_LL_EF_Timestamp Timestamp
+ * @{
+ */
+
+/**
+ * @brief Enable Timestamp
+ * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before.
+ * @rmtoll CR TSE LL_RTC_TS_Enable
+ * @param RTCx RTC Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_TS_Enable(RTC_TypeDef *RTCx)
+{
+ SET_BIT(RTCx->CR, RTC_CR_TSE);
+}
+
+/**
+ * @brief Disable Timestamp
+ * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before.
+ * @rmtoll CR TSE LL_RTC_TS_Disable
+ * @param RTCx RTC Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_TS_Disable(RTC_TypeDef *RTCx)
+{
+ CLEAR_BIT(RTCx->CR, RTC_CR_TSE);
+}
+
+/**
+ * @brief Set Time-stamp event active edge
+ * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before.
+ * @note TSE must be reset when TSEDGE is changed to avoid unwanted TSF setting
+ * @rmtoll CR TSEDGE LL_RTC_TS_SetActiveEdge
+ * @param RTCx RTC Instance
+ * @param Edge This parameter can be one of the following values:
+ * @arg @ref LL_RTC_TIMESTAMP_EDGE_RISING
+ * @arg @ref LL_RTC_TIMESTAMP_EDGE_FALLING
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_TS_SetActiveEdge(RTC_TypeDef *RTCx, uint32_t Edge)
+{
+ MODIFY_REG(RTCx->CR, RTC_CR_TSEDGE, Edge);
+}
+
+/**
+ * @brief Get Time-stamp event active edge
+ * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before.
+ * @rmtoll CR TSEDGE LL_RTC_TS_GetActiveEdge
+ * @param RTCx RTC Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RTC_TIMESTAMP_EDGE_RISING
+ * @arg @ref LL_RTC_TIMESTAMP_EDGE_FALLING
+ */
+__STATIC_INLINE uint32_t LL_RTC_TS_GetActiveEdge(RTC_TypeDef *RTCx)
+{
+ return (uint32_t)(READ_BIT(RTCx->CR, RTC_CR_TSEDGE));
+}
+
+/**
+ * @brief Get Timestamp AM/PM notation (AM or 24-hour format)
+ * @rmtoll TSTR PM LL_RTC_TS_GetTimeFormat
+ * @param RTCx RTC Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RTC_TS_TIME_FORMAT_AM
+ * @arg @ref LL_RTC_TS_TIME_FORMAT_PM
+ */
+__STATIC_INLINE uint32_t LL_RTC_TS_GetTimeFormat(RTC_TypeDef *RTCx)
+{
+ return (uint32_t)(READ_BIT(RTCx->TSTR, RTC_TSTR_PM));
+}
+
+/**
+ * @brief Get Timestamp Hours in BCD format
+ * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Hours from BCD to Binary format
+ * @rmtoll TSTR HT LL_RTC_TS_GetHour\n
+ * TSTR HU LL_RTC_TS_GetHour
+ * @param RTCx RTC Instance
+ * @retval Value between Min_Data=0x01 and Max_Data=0x12 or between Min_Data=0x00 and Max_Data=0x23
+ */
+__STATIC_INLINE uint32_t LL_RTC_TS_GetHour(RTC_TypeDef *RTCx)
+{
+ return (uint32_t)(READ_BIT(RTCx->TSTR, RTC_TSTR_HT | RTC_TSTR_HU) >> RTC_TSTR_HU_Pos);
+}
+
+/**
+ * @brief Get Timestamp Minutes in BCD format
+ * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Minutes from BCD to Binary format
+ * @rmtoll TSTR MNT LL_RTC_TS_GetMinute\n
+ * TSTR MNU LL_RTC_TS_GetMinute
+ * @param RTCx RTC Instance
+ * @retval Value between Min_Data=0x00 and Max_Data=0x59
+ */
+__STATIC_INLINE uint32_t LL_RTC_TS_GetMinute(RTC_TypeDef *RTCx)
+{
+ return (uint32_t)(READ_BIT(RTCx->TSTR, RTC_TSTR_MNT | RTC_TSTR_MNU) >> RTC_TSTR_MNU_Pos);
+}
+
+/**
+ * @brief Get Timestamp Seconds in BCD format
+ * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Seconds from BCD to Binary format
+ * @rmtoll TSTR ST LL_RTC_TS_GetSecond\n
+ * TSTR SU LL_RTC_TS_GetSecond
+ * @param RTCx RTC Instance
+ * @retval Value between Min_Data=0x00 and Max_Data=0x59
+ */
+__STATIC_INLINE uint32_t LL_RTC_TS_GetSecond(RTC_TypeDef *RTCx)
+{
+ return (uint32_t)(READ_BIT(RTCx->TSTR, RTC_TSTR_ST | RTC_TSTR_SU));
+}
+
+/**
+ * @brief Get Timestamp time (hour, minute and second) in BCD format
+ * @note helper macros __LL_RTC_GET_HOUR, __LL_RTC_GET_MINUTE and __LL_RTC_GET_SECOND
+ * are available to get independently each parameter.
+ * @rmtoll TSTR HT LL_RTC_TS_GetTime\n
+ * TSTR HU LL_RTC_TS_GetTime\n
+ * TSTR MNT LL_RTC_TS_GetTime\n
+ * TSTR MNU LL_RTC_TS_GetTime\n
+ * TSTR ST LL_RTC_TS_GetTime\n
+ * TSTR SU LL_RTC_TS_GetTime
+ * @param RTCx RTC Instance
+ * @retval Combination of hours, minutes and seconds.
+ */
+__STATIC_INLINE uint32_t LL_RTC_TS_GetTime(RTC_TypeDef *RTCx)
+{
+ return (uint32_t)(READ_BIT(RTCx->TSTR,
+ RTC_TSTR_HT | RTC_TSTR_HU | RTC_TSTR_MNT | RTC_TSTR_MNU | RTC_TSTR_ST | RTC_TSTR_SU));
+}
+
+/**
+ * @brief Get Timestamp Week day
+ * @rmtoll TSDR WDU LL_RTC_TS_GetWeekDay
+ * @param RTCx RTC Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RTC_WEEKDAY_MONDAY
+ * @arg @ref LL_RTC_WEEKDAY_TUESDAY
+ * @arg @ref LL_RTC_WEEKDAY_WEDNESDAY
+ * @arg @ref LL_RTC_WEEKDAY_THURSDAY
+ * @arg @ref LL_RTC_WEEKDAY_FRIDAY
+ * @arg @ref LL_RTC_WEEKDAY_SATURDAY
+ * @arg @ref LL_RTC_WEEKDAY_SUNDAY
+ */
+__STATIC_INLINE uint32_t LL_RTC_TS_GetWeekDay(RTC_TypeDef *RTCx)
+{
+ return (uint32_t)(READ_BIT(RTCx->TSDR, RTC_TSDR_WDU) >> RTC_TSDR_WDU_Pos);
+}
+
+/**
+ * @brief Get Timestamp Month in BCD format
+ * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Month from BCD to Binary format
+ * @rmtoll TSDR MT LL_RTC_TS_GetMonth\n
+ * TSDR MU LL_RTC_TS_GetMonth
+ * @param RTCx RTC Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RTC_MONTH_JANUARY
+ * @arg @ref LL_RTC_MONTH_FEBRUARY
+ * @arg @ref LL_RTC_MONTH_MARCH
+ * @arg @ref LL_RTC_MONTH_APRIL
+ * @arg @ref LL_RTC_MONTH_MAY
+ * @arg @ref LL_RTC_MONTH_JUNE
+ * @arg @ref LL_RTC_MONTH_JULY
+ * @arg @ref LL_RTC_MONTH_AUGUST
+ * @arg @ref LL_RTC_MONTH_SEPTEMBER
+ * @arg @ref LL_RTC_MONTH_OCTOBER
+ * @arg @ref LL_RTC_MONTH_NOVEMBER
+ * @arg @ref LL_RTC_MONTH_DECEMBER
+ */
+__STATIC_INLINE uint32_t LL_RTC_TS_GetMonth(RTC_TypeDef *RTCx)
+{
+ return (uint32_t)(READ_BIT(RTCx->TSDR, RTC_TSDR_MT | RTC_TSDR_MU) >> RTC_TSDR_MU_Pos);
+}
+
+/**
+ * @brief Get Timestamp Day in BCD format
+ * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Day from BCD to Binary format
+ * @rmtoll TSDR DT LL_RTC_TS_GetDay\n
+ * TSDR DU LL_RTC_TS_GetDay
+ * @param RTCx RTC Instance
+ * @retval Value between Min_Data=0x01 and Max_Data=0x31
+ */
+__STATIC_INLINE uint32_t LL_RTC_TS_GetDay(RTC_TypeDef *RTCx)
+{
+ return (uint32_t)(READ_BIT(RTCx->TSDR, RTC_TSDR_DT | RTC_TSDR_DU));
+}
+
+/**
+ * @brief Get Timestamp date (WeekDay, Day and Month) in BCD format
+ * @note helper macros __LL_RTC_GET_WEEKDAY, __LL_RTC_GET_MONTH,
+ * and __LL_RTC_GET_DAY are available to get independently each parameter.
+ * @rmtoll TSDR WDU LL_RTC_TS_GetDate\n
+ * TSDR MT LL_RTC_TS_GetDate\n
+ * TSDR MU LL_RTC_TS_GetDate\n
+ * TSDR DT LL_RTC_TS_GetDate\n
+ * TSDR DU LL_RTC_TS_GetDate
+ * @param RTCx RTC Instance
+ * @retval Combination of Weekday, Day and Month
+ */
+__STATIC_INLINE uint32_t LL_RTC_TS_GetDate(RTC_TypeDef *RTCx)
+{
+ return (uint32_t)(READ_BIT(RTCx->TSDR, RTC_TSDR_WDU | RTC_TSDR_MT | RTC_TSDR_MU | RTC_TSDR_DT | RTC_TSDR_DU));
+}
+
+/**
+ * @brief Get time-stamp sub second value
+ * @rmtoll TSSSR SS LL_RTC_TS_GetSubSecond
+ * @param RTCx RTC Instance
+ * @retval Value between Min_Data=0x00 and Max_Data=0xFFFF
+ */
+__STATIC_INLINE uint32_t LL_RTC_TS_GetSubSecond(RTC_TypeDef *RTCx)
+{
+ return (uint32_t)(READ_BIT(RTCx->TSSSR, RTC_TSSSR_SS));
+}
+
+#if defined(RTC_TAFCR_TAMPTS)
+/**
+ * @brief Activate timestamp on tamper detection event
+ * @rmtoll TAFCR TAMPTS LL_RTC_TS_EnableOnTamper
+ * @param RTCx RTC Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_TS_EnableOnTamper(RTC_TypeDef *RTCx)
+{
+ SET_BIT(RTCx->TAFCR, RTC_TAFCR_TAMPTS);
+}
+
+/**
+ * @brief Disable timestamp on tamper detection event
+ * @rmtoll TAFCR TAMPTS LL_RTC_TS_DisableOnTamper
+ * @param RTCx RTC Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_TS_DisableOnTamper(RTC_TypeDef *RTCx)
+{
+ CLEAR_BIT(RTCx->TAFCR, RTC_TAFCR_TAMPTS);
+}
+#endif /* RTC_TAFCR_TAMPTS */
+
+/**
+ * @}
+ */
+
+/** @defgroup RTC_LL_EF_Tamper Tamper
+ * @{
+ */
+
+/**
+ * @brief Enable RTC_TAMPx input detection
+ * @rmtoll TAFCR TAMP1E LL_RTC_TAMPER_Enable\n
+ * TAFCR TAMP2E LL_RTC_TAMPER_Enable\n
+ * TAFCR TAMP3E LL_RTC_TAMPER_Enable
+ * @param RTCx RTC Instance
+ * @param Tamper This parameter can be a combination of the following values:
+ * @arg @ref LL_RTC_TAMPER_1
+ * @arg @ref LL_RTC_TAMPER_2
+ * @arg @ref LL_RTC_TAMPER_3 (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_TAMPER_Enable(RTC_TypeDef *RTCx, uint32_t Tamper)
+{
+ SET_BIT(RTCx->TAFCR, Tamper);
+}
+
+/**
+ * @brief Clear RTC_TAMPx input detection
+ * @rmtoll TAFCR TAMP1E LL_RTC_TAMPER_Disable\n
+ * TAFCR TAMP2E LL_RTC_TAMPER_Disable\n
+ * TAFCR TAMP3E LL_RTC_TAMPER_Disable
+ * @param RTCx RTC Instance
+ * @param Tamper This parameter can be a combination of the following values:
+ * @arg @ref LL_RTC_TAMPER_1
+ * @arg @ref LL_RTC_TAMPER_2
+ * @arg @ref LL_RTC_TAMPER_3 (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_TAMPER_Disable(RTC_TypeDef *RTCx, uint32_t Tamper)
+{
+ CLEAR_BIT(RTCx->TAFCR, Tamper);
+}
+
+#if defined(RTC_TAFCR_TAMPPUDIS)
+/**
+ * @brief Disable RTC_TAMPx pull-up disable (Disable precharge of RTC_TAMPx pins)
+ * @rmtoll TAFCR TAMPPUDIS LL_RTC_TAMPER_DisablePullUp
+ * @param RTCx RTC Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_TAMPER_DisablePullUp(RTC_TypeDef *RTCx)
+{
+ SET_BIT(RTCx->TAFCR, RTC_TAFCR_TAMPPUDIS);
+}
+
+/**
+ * @brief Enable RTC_TAMPx pull-up disable ( Precharge RTC_TAMPx pins before sampling)
+ * @rmtoll TAFCR TAMPPUDIS LL_RTC_TAMPER_EnablePullUp
+ * @param RTCx RTC Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_TAMPER_EnablePullUp(RTC_TypeDef *RTCx)
+{
+ CLEAR_BIT(RTCx->TAFCR, RTC_TAFCR_TAMPPUDIS);
+}
+#endif /* RTC_TAFCR_TAMPPUDIS */
+
+#if defined(RTC_TAFCR_TAMPPRCH)
+/**
+ * @brief Set RTC_TAMPx precharge duration
+ * @rmtoll TAFCR TAMPPRCH LL_RTC_TAMPER_SetPrecharge
+ * @param RTCx RTC Instance
+ * @param Duration This parameter can be one of the following values:
+ * @arg @ref LL_RTC_TAMPER_DURATION_1RTCCLK
+ * @arg @ref LL_RTC_TAMPER_DURATION_2RTCCLK
+ * @arg @ref LL_RTC_TAMPER_DURATION_4RTCCLK
+ * @arg @ref LL_RTC_TAMPER_DURATION_8RTCCLK
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_TAMPER_SetPrecharge(RTC_TypeDef *RTCx, uint32_t Duration)
+{
+ MODIFY_REG(RTCx->TAFCR, RTC_TAFCR_TAMPPRCH, Duration);
+}
+
+/**
+ * @brief Get RTC_TAMPx precharge duration
+ * @rmtoll TAFCR TAMPPRCH LL_RTC_TAMPER_GetPrecharge
+ * @param RTCx RTC Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RTC_TAMPER_DURATION_1RTCCLK
+ * @arg @ref LL_RTC_TAMPER_DURATION_2RTCCLK
+ * @arg @ref LL_RTC_TAMPER_DURATION_4RTCCLK
+ * @arg @ref LL_RTC_TAMPER_DURATION_8RTCCLK
+ */
+__STATIC_INLINE uint32_t LL_RTC_TAMPER_GetPrecharge(RTC_TypeDef *RTCx)
+{
+ return (uint32_t)(READ_BIT(RTCx->TAFCR, RTC_TAFCR_TAMPPRCH));
+}
+#endif /* RTC_TAFCR_TAMPPRCH */
+
+#if defined(RTC_TAFCR_TAMPFLT)
+/**
+ * @brief Set RTC_TAMPx filter count
+ * @rmtoll TAFCR TAMPFLT LL_RTC_TAMPER_SetFilterCount
+ * @param RTCx RTC Instance
+ * @param FilterCount This parameter can be one of the following values:
+ * @arg @ref LL_RTC_TAMPER_FILTER_DISABLE
+ * @arg @ref LL_RTC_TAMPER_FILTER_2SAMPLE
+ * @arg @ref LL_RTC_TAMPER_FILTER_4SAMPLE
+ * @arg @ref LL_RTC_TAMPER_FILTER_8SAMPLE
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_TAMPER_SetFilterCount(RTC_TypeDef *RTCx, uint32_t FilterCount)
+{
+ MODIFY_REG(RTCx->TAFCR, RTC_TAFCR_TAMPFLT, FilterCount);
+}
+
+/**
+ * @brief Get RTC_TAMPx filter count
+ * @rmtoll TAFCR TAMPFLT LL_RTC_TAMPER_GetFilterCount
+ * @param RTCx RTC Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RTC_TAMPER_FILTER_DISABLE
+ * @arg @ref LL_RTC_TAMPER_FILTER_2SAMPLE
+ * @arg @ref LL_RTC_TAMPER_FILTER_4SAMPLE
+ * @arg @ref LL_RTC_TAMPER_FILTER_8SAMPLE
+ */
+__STATIC_INLINE uint32_t LL_RTC_TAMPER_GetFilterCount(RTC_TypeDef *RTCx)
+{
+ return (uint32_t)(READ_BIT(RTCx->TAFCR, RTC_TAFCR_TAMPFLT));
+}
+#endif /* RTC_TAFCR_TAMPFLT */
+
+#if defined(RTC_TAFCR_TAMPFREQ)
+/**
+ * @brief Set Tamper sampling frequency
+ * @rmtoll TAFCR TAMPFREQ LL_RTC_TAMPER_SetSamplingFreq
+ * @param RTCx RTC Instance
+ * @param SamplingFreq This parameter can be one of the following values:
+ * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_32768
+ * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_16384
+ * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_8192
+ * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_4096
+ * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_2048
+ * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_1024
+ * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_512
+ * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_256
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_TAMPER_SetSamplingFreq(RTC_TypeDef *RTCx, uint32_t SamplingFreq)
+{
+ MODIFY_REG(RTCx->TAFCR, RTC_TAFCR_TAMPFREQ, SamplingFreq);
+}
+
+/**
+ * @brief Get Tamper sampling frequency
+ * @rmtoll TAFCR TAMPFREQ LL_RTC_TAMPER_GetSamplingFreq
+ * @param RTCx RTC Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_32768
+ * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_16384
+ * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_8192
+ * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_4096
+ * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_2048
+ * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_1024
+ * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_512
+ * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_256
+ */
+__STATIC_INLINE uint32_t LL_RTC_TAMPER_GetSamplingFreq(RTC_TypeDef *RTCx)
+{
+ return (uint32_t)(READ_BIT(RTCx->TAFCR, RTC_TAFCR_TAMPFREQ));
+}
+#endif /* RTC_TAFCR_TAMPFREQ */
+
+/**
+ * @brief Enable Active level for Tamper input
+ * @rmtoll TAFCR TAMP1TRG LL_RTC_TAMPER_EnableActiveLevel\n
+ * TAFCR TAMP2TRG LL_RTC_TAMPER_EnableActiveLevel\n
+ * TAFCR TAMP3TRG LL_RTC_TAMPER_EnableActiveLevel
+ * @param RTCx RTC Instance
+ * @param Tamper This parameter can be a combination of the following values:
+ * @arg @ref LL_RTC_TAMPER_ACTIVELEVEL_TAMP1
+ * @arg @ref LL_RTC_TAMPER_ACTIVELEVEL_TAMP2
+ * @arg @ref LL_RTC_TAMPER_ACTIVELEVEL_TAMP3 (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_TAMPER_EnableActiveLevel(RTC_TypeDef *RTCx, uint32_t Tamper)
+{
+ SET_BIT(RTCx->TAFCR, Tamper);
+}
+
+/**
+ * @brief Disable Active level for Tamper input
+ * @rmtoll TAFCR TAMP1TRG LL_RTC_TAMPER_DisableActiveLevel\n
+ * TAFCR TAMP2TRG LL_RTC_TAMPER_DisableActiveLevel\n
+ * TAFCR TAMP3TRG LL_RTC_TAMPER_DisableActiveLevel
+ * @param RTCx RTC Instance
+ * @param Tamper This parameter can be a combination of the following values:
+ * @arg @ref LL_RTC_TAMPER_ACTIVELEVEL_TAMP1
+ * @arg @ref LL_RTC_TAMPER_ACTIVELEVEL_TAMP2
+ * @arg @ref LL_RTC_TAMPER_ACTIVELEVEL_TAMP3 (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_TAMPER_DisableActiveLevel(RTC_TypeDef *RTCx, uint32_t Tamper)
+{
+ CLEAR_BIT(RTCx->TAFCR, Tamper);
+}
+
+/**
+ * @}
+ */
+
+#if defined(RTC_WAKEUP_SUPPORT)
+/** @defgroup RTC_LL_EF_Wakeup Wakeup
+ * @{
+ */
+
+/**
+ * @brief Enable Wakeup timer
+ * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before.
+ * @rmtoll CR WUTE LL_RTC_WAKEUP_Enable
+ * @param RTCx RTC Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_WAKEUP_Enable(RTC_TypeDef *RTCx)
+{
+ SET_BIT(RTCx->CR, RTC_CR_WUTE);
+}
+
+/**
+ * @brief Disable Wakeup timer
+ * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before.
+ * @rmtoll CR WUTE LL_RTC_WAKEUP_Disable
+ * @param RTCx RTC Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_WAKEUP_Disable(RTC_TypeDef *RTCx)
+{
+ CLEAR_BIT(RTCx->CR, RTC_CR_WUTE);
+}
+
+/**
+ * @brief Check if Wakeup timer is enabled or not
+ * @rmtoll CR WUTE LL_RTC_WAKEUP_IsEnabled
+ * @param RTCx RTC Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RTC_WAKEUP_IsEnabled(RTC_TypeDef *RTCx)
+{
+ return (READ_BIT(RTCx->CR, RTC_CR_WUTE) == (RTC_CR_WUTE));
+}
+
+/**
+ * @brief Select Wakeup clock
+ * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before.
+ * @note Bit can be written only when RTC_CR WUTE bit = 0 and RTC_ISR WUTWF bit = 1
+ * @rmtoll CR WUCKSEL LL_RTC_WAKEUP_SetClock
+ * @param RTCx RTC Instance
+ * @param WakeupClock This parameter can be one of the following values:
+ * @arg @ref LL_RTC_WAKEUPCLOCK_DIV_16
+ * @arg @ref LL_RTC_WAKEUPCLOCK_DIV_8
+ * @arg @ref LL_RTC_WAKEUPCLOCK_DIV_4
+ * @arg @ref LL_RTC_WAKEUPCLOCK_DIV_2
+ * @arg @ref LL_RTC_WAKEUPCLOCK_CKSPRE
+ * @arg @ref LL_RTC_WAKEUPCLOCK_CKSPRE_WUT
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_WAKEUP_SetClock(RTC_TypeDef *RTCx, uint32_t WakeupClock)
+{
+ MODIFY_REG(RTCx->CR, RTC_CR_WUCKSEL, WakeupClock);
+}
+
+/**
+ * @brief Get Wakeup clock
+ * @rmtoll CR WUCKSEL LL_RTC_WAKEUP_GetClock
+ * @param RTCx RTC Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RTC_WAKEUPCLOCK_DIV_16
+ * @arg @ref LL_RTC_WAKEUPCLOCK_DIV_8
+ * @arg @ref LL_RTC_WAKEUPCLOCK_DIV_4
+ * @arg @ref LL_RTC_WAKEUPCLOCK_DIV_2
+ * @arg @ref LL_RTC_WAKEUPCLOCK_CKSPRE
+ * @arg @ref LL_RTC_WAKEUPCLOCK_CKSPRE_WUT
+ */
+__STATIC_INLINE uint32_t LL_RTC_WAKEUP_GetClock(RTC_TypeDef *RTCx)
+{
+ return (uint32_t)(READ_BIT(RTCx->CR, RTC_CR_WUCKSEL));
+}
+
+/**
+ * @brief Set Wakeup auto-reload value
+ * @note Bit can be written only when WUTWF is set to 1 in RTC_ISR
+ * @rmtoll WUTR WUT LL_RTC_WAKEUP_SetAutoReload
+ * @param RTCx RTC Instance
+ * @param Value Value between Min_Data=0x00 and Max_Data=0xFFFF
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_WAKEUP_SetAutoReload(RTC_TypeDef *RTCx, uint32_t Value)
+{
+ MODIFY_REG(RTCx->WUTR, RTC_WUTR_WUT, Value);
+}
+
+/**
+ * @brief Get Wakeup auto-reload value
+ * @rmtoll WUTR WUT LL_RTC_WAKEUP_GetAutoReload
+ * @param RTCx RTC Instance
+ * @retval Value between Min_Data=0x00 and Max_Data=0xFFFF
+ */
+__STATIC_INLINE uint32_t LL_RTC_WAKEUP_GetAutoReload(RTC_TypeDef *RTCx)
+{
+ return (uint32_t)(READ_BIT(RTCx->WUTR, RTC_WUTR_WUT));
+}
+
+/**
+ * @}
+ */
+#endif /* RTC_WAKEUP_SUPPORT */
+
+#if defined(RTC_BACKUP_SUPPORT)
+/** @defgroup RTC_LL_EF_Backup_Registers Backup_Registers
+ * @{
+ */
+
+/**
+ * @brief Writes a data in a specified RTC Backup data register.
+ * @rmtoll BKPxR BKP LL_RTC_BAK_SetRegister
+ * @param RTCx RTC Instance
+ * @param BackupRegister This parameter can be one of the following values:
+ * @arg @ref LL_RTC_BKP_DR0
+ * @arg @ref LL_RTC_BKP_DR1
+ * @arg @ref LL_RTC_BKP_DR2
+ * @arg @ref LL_RTC_BKP_DR3
+ * @arg @ref LL_RTC_BKP_DR4
+ * @param Data Value between Min_Data=0x00 and Max_Data=0xFFFFFFFF
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_BAK_SetRegister(RTC_TypeDef *RTCx, uint32_t BackupRegister, uint32_t Data)
+{
+ register uint32_t tmp = 0U;
+
+ tmp = (uint32_t)(&(RTCx->BKP0R));
+ tmp += (BackupRegister * 4U);
+
+ /* Write the specified register */
+ *(__IO uint32_t *)tmp = (uint32_t)Data;
+}
+
+/**
+ * @brief Reads data from the specified RTC Backup data Register.
+ * @rmtoll BKPxR BKP LL_RTC_BAK_GetRegister
+ * @param RTCx RTC Instance
+ * @param BackupRegister This parameter can be one of the following values:
+ * @arg @ref LL_RTC_BKP_DR0
+ * @arg @ref LL_RTC_BKP_DR1
+ * @arg @ref LL_RTC_BKP_DR2
+ * @arg @ref LL_RTC_BKP_DR3
+ * @arg @ref LL_RTC_BKP_DR4
+ * @retval Value between Min_Data=0x00 and Max_Data=0xFFFFFFFF
+ */
+__STATIC_INLINE uint32_t LL_RTC_BAK_GetRegister(RTC_TypeDef *RTCx, uint32_t BackupRegister)
+{
+ register uint32_t tmp = 0U;
+
+ tmp = (uint32_t)(&(RTCx->BKP0R));
+ tmp += (BackupRegister * 4U);
+
+ /* Read the specified register */
+ return (*(__IO uint32_t *)tmp);
+}
+
+/**
+ * @}
+ */
+#endif /* RTC_BACKUP_SUPPORT */
+
+/** @defgroup RTC_LL_EF_Calibration Calibration
+ * @{
+ */
+
+/**
+ * @brief Set Calibration output frequency (1 Hz or 512 Hz)
+ * @note Bits are write-protected. @ref LL_RTC_DisableWriteProtection function should be called before.
+ * @rmtoll CR COE LL_RTC_CAL_SetOutputFreq\n
+ * CR COSEL LL_RTC_CAL_SetOutputFreq
+ * @param RTCx RTC Instance
+ * @param Frequency This parameter can be one of the following values:
+ * @arg @ref LL_RTC_CALIB_OUTPUT_NONE
+ * @arg @ref LL_RTC_CALIB_OUTPUT_1HZ
+ * @arg @ref LL_RTC_CALIB_OUTPUT_512HZ
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_CAL_SetOutputFreq(RTC_TypeDef *RTCx, uint32_t Frequency)
+{
+ MODIFY_REG(RTCx->CR, RTC_CR_COE | RTC_CR_COSEL, Frequency);
+}
+
+/**
+ * @brief Get Calibration output frequency (1 Hz or 512 Hz)
+ * @rmtoll CR COE LL_RTC_CAL_GetOutputFreq\n
+ * CR COSEL LL_RTC_CAL_GetOutputFreq
+ * @param RTCx RTC Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RTC_CALIB_OUTPUT_NONE
+ * @arg @ref LL_RTC_CALIB_OUTPUT_1HZ
+ * @arg @ref LL_RTC_CALIB_OUTPUT_512HZ
+ */
+__STATIC_INLINE uint32_t LL_RTC_CAL_GetOutputFreq(RTC_TypeDef *RTCx)
+{
+ return (uint32_t)(READ_BIT(RTCx->CR, RTC_CR_COE | RTC_CR_COSEL));
+}
+
+/**
+ * @brief Insert or not One RTCCLK pulse every 2exp11 pulses (frequency increased by 488.5 ppm)
+ * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before.
+ * @note Bit can be written only when RECALPF is set to 0 in RTC_ISR
+ * @rmtoll CALR CALP LL_RTC_CAL_SetPulse
+ * @param RTCx RTC Instance
+ * @param Pulse This parameter can be one of the following values:
+ * @arg @ref LL_RTC_CALIB_INSERTPULSE_NONE
+ * @arg @ref LL_RTC_CALIB_INSERTPULSE_SET
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_CAL_SetPulse(RTC_TypeDef *RTCx, uint32_t Pulse)
+{
+ MODIFY_REG(RTCx->CALR, RTC_CALR_CALP, Pulse);
+}
+
+/**
+ * @brief Check if one RTCCLK has been inserted or not every 2exp11 pulses (frequency increased by 488.5 ppm)
+ * @rmtoll CALR CALP LL_RTC_CAL_IsPulseInserted
+ * @param RTCx RTC Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RTC_CAL_IsPulseInserted(RTC_TypeDef *RTCx)
+{
+ return (READ_BIT(RTCx->CALR, RTC_CALR_CALP) == (RTC_CALR_CALP));
+}
+
+/**
+ * @brief Set the calibration cycle period
+ * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before.
+ * @note Bit can be written only when RECALPF is set to 0 in RTC_ISR
+ * @rmtoll CALR CALW8 LL_RTC_CAL_SetPeriod\n
+ * CALR CALW16 LL_RTC_CAL_SetPeriod
+ * @param RTCx RTC Instance
+ * @param Period This parameter can be one of the following values:
+ * @arg @ref LL_RTC_CALIB_PERIOD_32SEC
+ * @arg @ref LL_RTC_CALIB_PERIOD_16SEC
+ * @arg @ref LL_RTC_CALIB_PERIOD_8SEC
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_CAL_SetPeriod(RTC_TypeDef *RTCx, uint32_t Period)
+{
+ MODIFY_REG(RTCx->CALR, RTC_CALR_CALW8 | RTC_CALR_CALW16, Period);
+}
+
+/**
+ * @brief Get the calibration cycle period
+ * @rmtoll CALR CALW8 LL_RTC_CAL_GetPeriod\n
+ * CALR CALW16 LL_RTC_CAL_GetPeriod
+ * @param RTCx RTC Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RTC_CALIB_PERIOD_32SEC
+ * @arg @ref LL_RTC_CALIB_PERIOD_16SEC
+ * @arg @ref LL_RTC_CALIB_PERIOD_8SEC
+ */
+__STATIC_INLINE uint32_t LL_RTC_CAL_GetPeriod(RTC_TypeDef *RTCx)
+{
+ return (uint32_t)(READ_BIT(RTCx->CALR, RTC_CALR_CALW8 | RTC_CALR_CALW16));
+}
+
+/**
+ * @brief Set Calibration minus
+ * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before.
+ * @note Bit can be written only when RECALPF is set to 0 in RTC_ISR
+ * @rmtoll CALR CALM LL_RTC_CAL_SetMinus
+ * @param RTCx RTC Instance
+ * @param CalibMinus Value between Min_Data=0x00 and Max_Data=0x1FF
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_CAL_SetMinus(RTC_TypeDef *RTCx, uint32_t CalibMinus)
+{
+ MODIFY_REG(RTCx->CALR, RTC_CALR_CALM, CalibMinus);
+}
+
+/**
+ * @brief Get Calibration minus
+ * @rmtoll CALR CALM LL_RTC_CAL_GetMinus
+ * @param RTCx RTC Instance
+ * @retval Value between Min_Data=0x00 and Max_Data= 0x1FF
+ */
+__STATIC_INLINE uint32_t LL_RTC_CAL_GetMinus(RTC_TypeDef *RTCx)
+{
+ return (uint32_t)(READ_BIT(RTCx->CALR, RTC_CALR_CALM));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup RTC_LL_EF_FLAG_Management FLAG_Management
+ * @{
+ */
+
+/**
+ * @brief Get Recalibration pending Flag
+ * @rmtoll ISR RECALPF LL_RTC_IsActiveFlag_RECALP
+ * @param RTCx RTC Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_RECALP(RTC_TypeDef *RTCx)
+{
+ return (READ_BIT(RTCx->ISR, RTC_ISR_RECALPF) == (RTC_ISR_RECALPF));
+}
+
+#if defined(RTC_TAMPER3_SUPPORT)
+/**
+ * @brief Get RTC_TAMP3 detection flag
+ * @rmtoll ISR TAMP3F LL_RTC_IsActiveFlag_TAMP3
+ * @param RTCx RTC Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_TAMP3(RTC_TypeDef *RTCx)
+{
+ return (READ_BIT(RTCx->ISR, RTC_ISR_TAMP3F) == (RTC_ISR_TAMP3F));
+}
+#endif /* RTC_TAMPER3_SUPPORT */
+
+#if defined(RTC_TAMPER2_SUPPORT)
+/**
+ * @brief Get RTC_TAMP2 detection flag
+ * @rmtoll ISR TAMP2F LL_RTC_IsActiveFlag_TAMP2
+ * @param RTCx RTC Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_TAMP2(RTC_TypeDef *RTCx)
+{
+ return (READ_BIT(RTCx->ISR, RTC_ISR_TAMP2F) == (RTC_ISR_TAMP2F));
+}
+#endif /* RTC_TAMPER2_SUPPORT */
+
+#if defined(RTC_TAMPER1_SUPPORT)
+/**
+ * @brief Get RTC_TAMP1 detection flag
+ * @rmtoll ISR TAMP1F LL_RTC_IsActiveFlag_TAMP1
+ * @param RTCx RTC Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_TAMP1(RTC_TypeDef *RTCx)
+{
+ return (READ_BIT(RTCx->ISR, RTC_ISR_TAMP1F) == (RTC_ISR_TAMP1F));
+}
+#endif /* RTC_TAMPER1_SUPPORT */
+
+/**
+ * @brief Get Time-stamp overflow flag
+ * @rmtoll ISR TSOVF LL_RTC_IsActiveFlag_TSOV
+ * @param RTCx RTC Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_TSOV(RTC_TypeDef *RTCx)
+{
+ return (READ_BIT(RTCx->ISR, RTC_ISR_TSOVF) == (RTC_ISR_TSOVF));
+}
+
+/**
+ * @brief Get Time-stamp flag
+ * @rmtoll ISR TSF LL_RTC_IsActiveFlag_TS
+ * @param RTCx RTC Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_TS(RTC_TypeDef *RTCx)
+{
+ return (READ_BIT(RTCx->ISR, RTC_ISR_TSF) == (RTC_ISR_TSF));
+}
+
+#if defined(RTC_WAKEUP_SUPPORT)
+/**
+ * @brief Get Wakeup timer flag
+ * @rmtoll ISR WUTF LL_RTC_IsActiveFlag_WUT
+ * @param RTCx RTC Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_WUT(RTC_TypeDef *RTCx)
+{
+ return (READ_BIT(RTCx->ISR, RTC_ISR_WUTF) == (RTC_ISR_WUTF));
+}
+#endif /* RTC_WAKEUP_SUPPORT */
+
+/**
+ * @brief Get Alarm A flag
+ * @rmtoll ISR ALRAF LL_RTC_IsActiveFlag_ALRA
+ * @param RTCx RTC Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ALRA(RTC_TypeDef *RTCx)
+{
+ return (READ_BIT(RTCx->ISR, RTC_ISR_ALRAF) == (RTC_ISR_ALRAF));
+}
+
+#if defined(RTC_TAMPER3_SUPPORT)
+/**
+ * @brief Clear RTC_TAMP3 detection flag
+ * @rmtoll ISR TAMP3F LL_RTC_ClearFlag_TAMP3
+ * @param RTCx RTC Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_ClearFlag_TAMP3(RTC_TypeDef *RTCx)
+{
+ WRITE_REG(RTCx->ISR, (~((RTC_ISR_TAMP3F | RTC_ISR_INIT) & 0x0000FFFFU) | (RTCx->ISR & RTC_ISR_INIT)));
+}
+#endif /* RTC_TAMPER3_SUPPORT */
+
+#if defined(RTC_TAMPER2_SUPPORT)
+/**
+ * @brief Clear RTC_TAMP2 detection flag
+ * @rmtoll ISR TAMP2F LL_RTC_ClearFlag_TAMP2
+ * @param RTCx RTC Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_ClearFlag_TAMP2(RTC_TypeDef *RTCx)
+{
+ WRITE_REG(RTCx->ISR, (~((RTC_ISR_TAMP2F | RTC_ISR_INIT) & 0x0000FFFFU) | (RTCx->ISR & RTC_ISR_INIT)));
+}
+#endif /* RTC_TAMPER2_SUPPORT */
+
+#if defined(RTC_TAMPER1_SUPPORT)
+/**
+ * @brief Clear RTC_TAMP1 detection flag
+ * @rmtoll ISR TAMP1F LL_RTC_ClearFlag_TAMP1
+ * @param RTCx RTC Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_ClearFlag_TAMP1(RTC_TypeDef *RTCx)
+{
+ WRITE_REG(RTCx->ISR, (~((RTC_ISR_TAMP1F | RTC_ISR_INIT) & 0x0000FFFFU) | (RTCx->ISR & RTC_ISR_INIT)));
+}
+#endif /* RTC_TAMPER1_SUPPORT */
+
+/**
+ * @brief Clear Time-stamp overflow flag
+ * @rmtoll ISR TSOVF LL_RTC_ClearFlag_TSOV
+ * @param RTCx RTC Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_ClearFlag_TSOV(RTC_TypeDef *RTCx)
+{
+ WRITE_REG(RTCx->ISR, (~((RTC_ISR_TSOVF | RTC_ISR_INIT) & 0x0000FFFFU) | (RTCx->ISR & RTC_ISR_INIT)));
+}
+
+/**
+ * @brief Clear Time-stamp flag
+ * @rmtoll ISR TSF LL_RTC_ClearFlag_TS
+ * @param RTCx RTC Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_ClearFlag_TS(RTC_TypeDef *RTCx)
+{
+ WRITE_REG(RTCx->ISR, (~((RTC_ISR_TSF | RTC_ISR_INIT) & 0x0000FFFFU) | (RTCx->ISR & RTC_ISR_INIT)));
+}
+
+#if defined(RTC_WAKEUP_SUPPORT)
+/**
+ * @brief Clear Wakeup timer flag
+ * @rmtoll ISR WUTF LL_RTC_ClearFlag_WUT
+ * @param RTCx RTC Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_ClearFlag_WUT(RTC_TypeDef *RTCx)
+{
+ WRITE_REG(RTCx->ISR, (~((RTC_ISR_WUTF | RTC_ISR_INIT) & 0x0000FFFFU) | (RTCx->ISR & RTC_ISR_INIT)));
+}
+#endif /* RTC_WAKEUP_SUPPORT */
+
+/**
+ * @brief Clear Alarm A flag
+ * @rmtoll ISR ALRAF LL_RTC_ClearFlag_ALRA
+ * @param RTCx RTC Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_ClearFlag_ALRA(RTC_TypeDef *RTCx)
+{
+ WRITE_REG(RTCx->ISR, (~((RTC_ISR_ALRAF | RTC_ISR_INIT) & 0x0000FFFFU) | (RTCx->ISR & RTC_ISR_INIT)));
+}
+
+/**
+ * @brief Get Initialization flag
+ * @rmtoll ISR INITF LL_RTC_IsActiveFlag_INIT
+ * @param RTCx RTC Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_INIT(RTC_TypeDef *RTCx)
+{
+ return (READ_BIT(RTCx->ISR, RTC_ISR_INITF) == (RTC_ISR_INITF));
+}
+
+/**
+ * @brief Get Registers synchronization flag
+ * @rmtoll ISR RSF LL_RTC_IsActiveFlag_RS
+ * @param RTCx RTC Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_RS(RTC_TypeDef *RTCx)
+{
+ return (READ_BIT(RTCx->ISR, RTC_ISR_RSF) == (RTC_ISR_RSF));
+}
+
+/**
+ * @brief Clear Registers synchronization flag
+ * @rmtoll ISR RSF LL_RTC_ClearFlag_RS
+ * @param RTCx RTC Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_ClearFlag_RS(RTC_TypeDef *RTCx)
+{
+ WRITE_REG(RTCx->ISR, (~((RTC_ISR_RSF | RTC_ISR_INIT) & 0x0000FFFFU) | (RTCx->ISR & RTC_ISR_INIT)));
+}
+
+/**
+ * @brief Get Initialization status flag
+ * @rmtoll ISR INITS LL_RTC_IsActiveFlag_INITS
+ * @param RTCx RTC Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_INITS(RTC_TypeDef *RTCx)
+{
+ return (READ_BIT(RTCx->ISR, RTC_ISR_INITS) == (RTC_ISR_INITS));
+}
+
+/**
+ * @brief Get Shift operation pending flag
+ * @rmtoll ISR SHPF LL_RTC_IsActiveFlag_SHP
+ * @param RTCx RTC Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_SHP(RTC_TypeDef *RTCx)
+{
+ return (READ_BIT(RTCx->ISR, RTC_ISR_SHPF) == (RTC_ISR_SHPF));
+}
+
+#if defined(RTC_WAKEUP_SUPPORT)
+/**
+ * @brief Get Wakeup timer write flag
+ * @rmtoll ISR WUTWF LL_RTC_IsActiveFlag_WUTW
+ * @param RTCx RTC Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_WUTW(RTC_TypeDef *RTCx)
+{
+ return (READ_BIT(RTCx->ISR, RTC_ISR_WUTWF) == (RTC_ISR_WUTWF));
+}
+#endif /* RTC_WAKEUP_SUPPORT */
+
+/**
+ * @brief Get Alarm A write flag
+ * @rmtoll ISR ALRAWF LL_RTC_IsActiveFlag_ALRAW
+ * @param RTCx RTC Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ALRAW(RTC_TypeDef *RTCx)
+{
+ return (READ_BIT(RTCx->ISR, RTC_ISR_ALRAWF) == (RTC_ISR_ALRAWF));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup RTC_LL_EF_IT_Management IT_Management
+ * @{
+ */
+
+/**
+ * @brief Enable Time-stamp interrupt
+ * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before.
+ * @rmtoll CR TSIE LL_RTC_EnableIT_TS
+ * @param RTCx RTC Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_EnableIT_TS(RTC_TypeDef *RTCx)
+{
+ SET_BIT(RTCx->CR, RTC_CR_TSIE);
+}
+
+/**
+ * @brief Disable Time-stamp interrupt
+ * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before.
+ * @rmtoll CR TSIE LL_RTC_DisableIT_TS
+ * @param RTCx RTC Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_DisableIT_TS(RTC_TypeDef *RTCx)
+{
+ CLEAR_BIT(RTCx->CR, RTC_CR_TSIE);
+}
+
+#if defined(RTC_WAKEUP_SUPPORT)
+/**
+ * @brief Enable Wakeup timer interrupt
+ * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before.
+ * @rmtoll CR WUTIE LL_RTC_EnableIT_WUT
+ * @param RTCx RTC Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_EnableIT_WUT(RTC_TypeDef *RTCx)
+{
+ SET_BIT(RTCx->CR, RTC_CR_WUTIE);
+}
+
+/**
+ * @brief Disable Wakeup timer interrupt
+ * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before.
+ * @rmtoll CR WUTIE LL_RTC_DisableIT_WUT
+ * @param RTCx RTC Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_DisableIT_WUT(RTC_TypeDef *RTCx)
+{
+ CLEAR_BIT(RTCx->CR, RTC_CR_WUTIE);
+}
+#endif /* RTC_WAKEUP_SUPPORT */
+
+/**
+ * @brief Enable Alarm A interrupt
+ * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before.
+ * @rmtoll CR ALRAIE LL_RTC_EnableIT_ALRA
+ * @param RTCx RTC Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_EnableIT_ALRA(RTC_TypeDef *RTCx)
+{
+ SET_BIT(RTCx->CR, RTC_CR_ALRAIE);
+}
+
+/**
+ * @brief Disable Alarm A interrupt
+ * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before.
+ * @rmtoll CR ALRAIE LL_RTC_DisableIT_ALRA
+ * @param RTCx RTC Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_DisableIT_ALRA(RTC_TypeDef *RTCx)
+{
+ CLEAR_BIT(RTCx->CR, RTC_CR_ALRAIE);
+}
+
+/**
+ * @brief Enable all Tamper Interrupt
+ * @rmtoll TAFCR TAMPIE LL_RTC_EnableIT_TAMP
+ * @param RTCx RTC Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_EnableIT_TAMP(RTC_TypeDef *RTCx)
+{
+ SET_BIT(RTCx->TAFCR, RTC_TAFCR_TAMPIE);
+}
+
+/**
+ * @brief Disable all Tamper Interrupt
+ * @rmtoll TAFCR TAMPIE LL_RTC_DisableIT_TAMP
+ * @param RTCx RTC Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_RTC_DisableIT_TAMP(RTC_TypeDef *RTCx)
+{
+ CLEAR_BIT(RTCx->TAFCR, RTC_TAFCR_TAMPIE);
+}
+
+/**
+ * @brief Check if Time-stamp interrupt is enabled or not
+ * @rmtoll CR TSIE LL_RTC_IsEnabledIT_TS
+ * @param RTCx RTC Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RTC_IsEnabledIT_TS(RTC_TypeDef *RTCx)
+{
+ return (READ_BIT(RTCx->CR, RTC_CR_TSIE) == (RTC_CR_TSIE));
+}
+
+#if defined(RTC_WAKEUP_SUPPORT)
+/**
+ * @brief Check if Wakeup timer interrupt is enabled or not
+ * @rmtoll CR WUTIE LL_RTC_IsEnabledIT_WUT
+ * @param RTCx RTC Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RTC_IsEnabledIT_WUT(RTC_TypeDef *RTCx)
+{
+ return (READ_BIT(RTCx->CR, RTC_CR_WUTIE) == (RTC_CR_WUTIE));
+}
+#endif /* RTC_WAKEUP_SUPPORT */
+
+/**
+ * @brief Check if Alarm A interrupt is enabled or not
+ * @rmtoll CR ALRAIE LL_RTC_IsEnabledIT_ALRA
+ * @param RTCx RTC Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RTC_IsEnabledIT_ALRA(RTC_TypeDef *RTCx)
+{
+ return (READ_BIT(RTCx->CR, RTC_CR_ALRAIE) == (RTC_CR_ALRAIE));
+}
+
+/**
+ * @brief Check if all the TAMPER interrupts are enabled or not
+ * @rmtoll TAFCR TAMPIE LL_RTC_IsEnabledIT_TAMP
+ * @param RTCx RTC Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RTC_IsEnabledIT_TAMP(RTC_TypeDef *RTCx)
+{
+ return (READ_BIT(RTCx->TAFCR,
+ RTC_TAFCR_TAMPIE) == (RTC_TAFCR_TAMPIE));
+}
+
+/**
+ * @}
+ */
+
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup RTC_LL_EF_Init Initialization and de-initialization functions
+ * @{
+ */
+
+ErrorStatus LL_RTC_DeInit(RTC_TypeDef *RTCx);
+ErrorStatus LL_RTC_Init(RTC_TypeDef *RTCx, LL_RTC_InitTypeDef *RTC_InitStruct);
+void LL_RTC_StructInit(LL_RTC_InitTypeDef *RTC_InitStruct);
+ErrorStatus LL_RTC_TIME_Init(RTC_TypeDef *RTCx, uint32_t RTC_Format, LL_RTC_TimeTypeDef *RTC_TimeStruct);
+void LL_RTC_TIME_StructInit(LL_RTC_TimeTypeDef *RTC_TimeStruct);
+ErrorStatus LL_RTC_DATE_Init(RTC_TypeDef *RTCx, uint32_t RTC_Format, LL_RTC_DateTypeDef *RTC_DateStruct);
+void LL_RTC_DATE_StructInit(LL_RTC_DateTypeDef *RTC_DateStruct);
+ErrorStatus LL_RTC_ALMA_Init(RTC_TypeDef *RTCx, uint32_t RTC_Format, LL_RTC_AlarmTypeDef *RTC_AlarmStruct);
+void LL_RTC_ALMA_StructInit(LL_RTC_AlarmTypeDef *RTC_AlarmStruct);
+ErrorStatus LL_RTC_EnterInitMode(RTC_TypeDef *RTCx);
+ErrorStatus LL_RTC_ExitInitMode(RTC_TypeDef *RTCx);
+ErrorStatus LL_RTC_WaitForSynchro(RTC_TypeDef *RTCx);
+
+/**
+ * @}
+ */
+#endif /* USE_FULL_LL_DRIVER */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* defined(RTC) */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_LL_RTC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_spi.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_spi.h
new file mode 100644
index 0000000..c063f51
--- /dev/null
+++ b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_spi.h
@@ -0,0 +1,2286 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_ll_spi.h
+ * @author MCD Application Team
+ * @brief Header file of SPI LL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32F0xx_LL_SPI_H
+#define STM32F0xx_LL_SPI_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx.h"
+
+/** @addtogroup STM32F0xx_LL_Driver
+ * @{
+ */
+
+#if defined (SPI1) || defined (SPI2)
+
+/** @defgroup SPI_LL SPI
+ * @{
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+
+/* Exported types ------------------------------------------------------------*/
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup SPI_LL_ES_INIT SPI Exported Init structure
+ * @{
+ */
+
+/**
+ * @brief SPI Init structures definition
+ */
+typedef struct
+{
+ uint32_t TransferDirection; /*!< Specifies the SPI unidirectional or bidirectional data mode.
+ This parameter can be a value of @ref SPI_LL_EC_TRANSFER_MODE.
+
+ This feature can be modified afterwards using unitary function @ref LL_SPI_SetTransferDirection().*/
+
+ uint32_t Mode; /*!< Specifies the SPI mode (Master/Slave).
+ This parameter can be a value of @ref SPI_LL_EC_MODE.
+
+ This feature can be modified afterwards using unitary function @ref LL_SPI_SetMode().*/
+
+ uint32_t DataWidth; /*!< Specifies the SPI data width.
+ This parameter can be a value of @ref SPI_LL_EC_DATAWIDTH.
+
+ This feature can be modified afterwards using unitary function @ref LL_SPI_SetDataWidth().*/
+
+ uint32_t ClockPolarity; /*!< Specifies the serial clock steady state.
+ This parameter can be a value of @ref SPI_LL_EC_POLARITY.
+
+ This feature can be modified afterwards using unitary function @ref LL_SPI_SetClockPolarity().*/
+
+ uint32_t ClockPhase; /*!< Specifies the clock active edge for the bit capture.
+ This parameter can be a value of @ref SPI_LL_EC_PHASE.
+
+ This feature can be modified afterwards using unitary function @ref LL_SPI_SetClockPhase().*/
+
+ uint32_t NSS; /*!< Specifies whether the NSS signal is managed by hardware (NSS pin) or by software using the SSI bit.
+ This parameter can be a value of @ref SPI_LL_EC_NSS_MODE.
+
+ This feature can be modified afterwards using unitary function @ref LL_SPI_SetNSSMode().*/
+
+ uint32_t BaudRate; /*!< Specifies the BaudRate prescaler value which will be used to configure the transmit and receive SCK clock.
+ This parameter can be a value of @ref SPI_LL_EC_BAUDRATEPRESCALER.
+ @note The communication clock is derived from the master clock. The slave clock does not need to be set.
+
+ This feature can be modified afterwards using unitary function @ref LL_SPI_SetBaudRatePrescaler().*/
+
+ uint32_t BitOrder; /*!< Specifies whether data transfers start from MSB or LSB bit.
+ This parameter can be a value of @ref SPI_LL_EC_BIT_ORDER.
+
+ This feature can be modified afterwards using unitary function @ref LL_SPI_SetTransferBitOrder().*/
+
+ uint32_t CRCCalculation; /*!< Specifies if the CRC calculation is enabled or not.
+ This parameter can be a value of @ref SPI_LL_EC_CRC_CALCULATION.
+
+ This feature can be modified afterwards using unitary functions @ref LL_SPI_EnableCRC() and @ref LL_SPI_DisableCRC().*/
+
+ uint32_t CRCPoly; /*!< Specifies the polynomial used for the CRC calculation.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFFFF.
+
+ This feature can be modified afterwards using unitary function @ref LL_SPI_SetCRCPolynomial().*/
+
+} LL_SPI_InitTypeDef;
+
+/**
+ * @}
+ */
+#endif /* USE_FULL_LL_DRIVER */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup SPI_LL_Exported_Constants SPI Exported Constants
+ * @{
+ */
+
+/** @defgroup SPI_LL_EC_GET_FLAG Get Flags Defines
+ * @brief Flags defines which can be used with LL_SPI_ReadReg function
+ * @{
+ */
+#define LL_SPI_SR_RXNE SPI_SR_RXNE /*!< Rx buffer not empty flag */
+#define LL_SPI_SR_TXE SPI_SR_TXE /*!< Tx buffer empty flag */
+#define LL_SPI_SR_BSY SPI_SR_BSY /*!< Busy flag */
+#define LL_SPI_SR_CRCERR SPI_SR_CRCERR /*!< CRC error flag */
+#define LL_SPI_SR_MODF SPI_SR_MODF /*!< Mode fault flag */
+#define LL_SPI_SR_OVR SPI_SR_OVR /*!< Overrun flag */
+#define LL_SPI_SR_FRE SPI_SR_FRE /*!< TI mode frame format error flag */
+/**
+ * @}
+ */
+
+/** @defgroup SPI_LL_EC_IT IT Defines
+ * @brief IT defines which can be used with LL_SPI_ReadReg and LL_SPI_WriteReg functions
+ * @{
+ */
+#define LL_SPI_CR2_RXNEIE SPI_CR2_RXNEIE /*!< Rx buffer not empty interrupt enable */
+#define LL_SPI_CR2_TXEIE SPI_CR2_TXEIE /*!< Tx buffer empty interrupt enable */
+#define LL_SPI_CR2_ERRIE SPI_CR2_ERRIE /*!< Error interrupt enable */
+/**
+ * @}
+ */
+
+/** @defgroup SPI_LL_EC_MODE Operation Mode
+ * @{
+ */
+#define LL_SPI_MODE_MASTER (SPI_CR1_MSTR | SPI_CR1_SSI) /*!< Master configuration */
+#define LL_SPI_MODE_SLAVE 0x00000000U /*!< Slave configuration */
+/**
+ * @}
+ */
+
+/** @defgroup SPI_LL_EC_PROTOCOL Serial Protocol
+ * @{
+ */
+#define LL_SPI_PROTOCOL_MOTOROLA 0x00000000U /*!< Motorola mode. Used as default value */
+#define LL_SPI_PROTOCOL_TI (SPI_CR2_FRF) /*!< TI mode */
+/**
+ * @}
+ */
+
+/** @defgroup SPI_LL_EC_PHASE Clock Phase
+ * @{
+ */
+#define LL_SPI_PHASE_1EDGE 0x00000000U /*!< First clock transition is the first data capture edge */
+#define LL_SPI_PHASE_2EDGE (SPI_CR1_CPHA) /*!< Second clock transition is the first data capture edge */
+/**
+ * @}
+ */
+
+/** @defgroup SPI_LL_EC_POLARITY Clock Polarity
+ * @{
+ */
+#define LL_SPI_POLARITY_LOW 0x00000000U /*!< Clock to 0 when idle */
+#define LL_SPI_POLARITY_HIGH (SPI_CR1_CPOL) /*!< Clock to 1 when idle */
+/**
+ * @}
+ */
+
+/** @defgroup SPI_LL_EC_BAUDRATEPRESCALER Baud Rate Prescaler
+ * @{
+ */
+#define LL_SPI_BAUDRATEPRESCALER_DIV2 0x00000000U /*!< BaudRate control equal to fPCLK/2 */
+#define LL_SPI_BAUDRATEPRESCALER_DIV4 (SPI_CR1_BR_0) /*!< BaudRate control equal to fPCLK/4 */
+#define LL_SPI_BAUDRATEPRESCALER_DIV8 (SPI_CR1_BR_1) /*!< BaudRate control equal to fPCLK/8 */
+#define LL_SPI_BAUDRATEPRESCALER_DIV16 (SPI_CR1_BR_1 | SPI_CR1_BR_0) /*!< BaudRate control equal to fPCLK/16 */
+#define LL_SPI_BAUDRATEPRESCALER_DIV32 (SPI_CR1_BR_2) /*!< BaudRate control equal to fPCLK/32 */
+#define LL_SPI_BAUDRATEPRESCALER_DIV64 (SPI_CR1_BR_2 | SPI_CR1_BR_0) /*!< BaudRate control equal to fPCLK/64 */
+#define LL_SPI_BAUDRATEPRESCALER_DIV128 (SPI_CR1_BR_2 | SPI_CR1_BR_1) /*!< BaudRate control equal to fPCLK/128 */
+#define LL_SPI_BAUDRATEPRESCALER_DIV256 (SPI_CR1_BR_2 | SPI_CR1_BR_1 | SPI_CR1_BR_0) /*!< BaudRate control equal to fPCLK/256 */
+/**
+ * @}
+ */
+
+/** @defgroup SPI_LL_EC_BIT_ORDER Transmission Bit Order
+ * @{
+ */
+#define LL_SPI_LSB_FIRST (SPI_CR1_LSBFIRST) /*!< Data is transmitted/received with the LSB first */
+#define LL_SPI_MSB_FIRST 0x00000000U /*!< Data is transmitted/received with the MSB first */
+/**
+ * @}
+ */
+
+/** @defgroup SPI_LL_EC_TRANSFER_MODE Transfer Mode
+ * @{
+ */
+#define LL_SPI_FULL_DUPLEX 0x00000000U /*!< Full-Duplex mode. Rx and Tx transfer on 2 lines */
+#define LL_SPI_SIMPLEX_RX (SPI_CR1_RXONLY) /*!< Simplex Rx mode. Rx transfer only on 1 line */
+#define LL_SPI_HALF_DUPLEX_RX (SPI_CR1_BIDIMODE) /*!< Half-Duplex Rx mode. Rx transfer on 1 line */
+#define LL_SPI_HALF_DUPLEX_TX (SPI_CR1_BIDIMODE | SPI_CR1_BIDIOE) /*!< Half-Duplex Tx mode. Tx transfer on 1 line */
+/**
+ * @}
+ */
+
+/** @defgroup SPI_LL_EC_NSS_MODE Slave Select Pin Mode
+ * @{
+ */
+#define LL_SPI_NSS_SOFT (SPI_CR1_SSM) /*!< NSS managed internally. NSS pin not used and free */
+#define LL_SPI_NSS_HARD_INPUT 0x00000000U /*!< NSS pin used in Input. Only used in Master mode */
+#define LL_SPI_NSS_HARD_OUTPUT (((uint32_t)SPI_CR2_SSOE << 16U)) /*!< NSS pin used in Output. Only used in Slave mode as chip select */
+/**
+ * @}
+ */
+
+/** @defgroup SPI_LL_EC_DATAWIDTH Datawidth
+ * @{
+ */
+#define LL_SPI_DATAWIDTH_4BIT (SPI_CR2_DS_0 | SPI_CR2_DS_1) /*!< Data length for SPI transfer: 4 bits */
+#define LL_SPI_DATAWIDTH_5BIT (SPI_CR2_DS_2) /*!< Data length for SPI transfer: 5 bits */
+#define LL_SPI_DATAWIDTH_6BIT (SPI_CR2_DS_2 | SPI_CR2_DS_0) /*!< Data length for SPI transfer: 6 bits */
+#define LL_SPI_DATAWIDTH_7BIT (SPI_CR2_DS_2 | SPI_CR2_DS_1) /*!< Data length for SPI transfer: 7 bits */
+#define LL_SPI_DATAWIDTH_8BIT (SPI_CR2_DS_2 | SPI_CR2_DS_1 | SPI_CR2_DS_0) /*!< Data length for SPI transfer: 8 bits */
+#define LL_SPI_DATAWIDTH_9BIT (SPI_CR2_DS_3) /*!< Data length for SPI transfer: 9 bits */
+#define LL_SPI_DATAWIDTH_10BIT (SPI_CR2_DS_3 | SPI_CR2_DS_0) /*!< Data length for SPI transfer: 10 bits */
+#define LL_SPI_DATAWIDTH_11BIT (SPI_CR2_DS_3 | SPI_CR2_DS_1) /*!< Data length for SPI transfer: 11 bits */
+#define LL_SPI_DATAWIDTH_12BIT (SPI_CR2_DS_3 | SPI_CR2_DS_1 | SPI_CR2_DS_0) /*!< Data length for SPI transfer: 12 bits */
+#define LL_SPI_DATAWIDTH_13BIT (SPI_CR2_DS_3 | SPI_CR2_DS_2) /*!< Data length for SPI transfer: 13 bits */
+#define LL_SPI_DATAWIDTH_14BIT (SPI_CR2_DS_3 | SPI_CR2_DS_2 | SPI_CR2_DS_0) /*!< Data length for SPI transfer: 14 bits */
+#define LL_SPI_DATAWIDTH_15BIT (SPI_CR2_DS_3 | SPI_CR2_DS_2 | SPI_CR2_DS_1) /*!< Data length for SPI transfer: 15 bits */
+#define LL_SPI_DATAWIDTH_16BIT (SPI_CR2_DS_3 | SPI_CR2_DS_2 | SPI_CR2_DS_1 | SPI_CR2_DS_0) /*!< Data length for SPI transfer: 16 bits */
+/**
+ * @}
+ */
+#if defined(USE_FULL_LL_DRIVER)
+
+/** @defgroup SPI_LL_EC_CRC_CALCULATION CRC Calculation
+ * @{
+ */
+#define LL_SPI_CRCCALCULATION_DISABLE 0x00000000U /*!< CRC calculation disabled */
+#define LL_SPI_CRCCALCULATION_ENABLE (SPI_CR1_CRCEN) /*!< CRC calculation enabled */
+/**
+ * @}
+ */
+#endif /* USE_FULL_LL_DRIVER */
+
+/** @defgroup SPI_LL_EC_CRC_LENGTH CRC Length
+ * @{
+ */
+#define LL_SPI_CRC_8BIT 0x00000000U /*!< 8-bit CRC length */
+#define LL_SPI_CRC_16BIT (SPI_CR1_CRCL) /*!< 16-bit CRC length */
+/**
+ * @}
+ */
+
+/** @defgroup SPI_LL_EC_RX_FIFO_TH RX FIFO Threshold
+ * @{
+ */
+#define LL_SPI_RX_FIFO_TH_HALF 0x00000000U /*!< RXNE event is generated if FIFO level is greater than or equel to 1/2 (16-bit) */
+#define LL_SPI_RX_FIFO_TH_QUARTER (SPI_CR2_FRXTH) /*!< RXNE event is generated if FIFO level is greater than or equel to 1/4 (8-bit) */
+/**
+ * @}
+ */
+
+/** @defgroup SPI_LL_EC_RX_FIFO RX FIFO Level
+ * @{
+ */
+#define LL_SPI_RX_FIFO_EMPTY 0x00000000U /*!< FIFO reception empty */
+#define LL_SPI_RX_FIFO_QUARTER_FULL (SPI_SR_FRLVL_0) /*!< FIFO reception 1/4 */
+#define LL_SPI_RX_FIFO_HALF_FULL (SPI_SR_FRLVL_1) /*!< FIFO reception 1/2 */
+#define LL_SPI_RX_FIFO_FULL (SPI_SR_FRLVL_1 | SPI_SR_FRLVL_0) /*!< FIFO reception full */
+/**
+ * @}
+ */
+
+/** @defgroup SPI_LL_EC_TX_FIFO TX FIFO Level
+ * @{
+ */
+#define LL_SPI_TX_FIFO_EMPTY 0x00000000U /*!< FIFO transmission empty */
+#define LL_SPI_TX_FIFO_QUARTER_FULL (SPI_SR_FTLVL_0) /*!< FIFO transmission 1/4 */
+#define LL_SPI_TX_FIFO_HALF_FULL (SPI_SR_FTLVL_1) /*!< FIFO transmission 1/2 */
+#define LL_SPI_TX_FIFO_FULL (SPI_SR_FTLVL_1 | SPI_SR_FTLVL_0) /*!< FIFO transmission full */
+/**
+ * @}
+ */
+
+/** @defgroup SPI_LL_EC_DMA_PARITY DMA Parity
+ * @{
+ */
+#define LL_SPI_DMA_PARITY_EVEN 0x00000000U /*!< Select DMA parity Even */
+#define LL_SPI_DMA_PARITY_ODD 0x00000001U /*!< Select DMA parity Odd */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup SPI_LL_Exported_Macros SPI Exported Macros
+ * @{
+ */
+
+/** @defgroup SPI_LL_EM_WRITE_READ Common Write and read registers Macros
+ * @{
+ */
+
+/**
+ * @brief Write a value in SPI register
+ * @param __INSTANCE__ SPI Instance
+ * @param __REG__ Register to be written
+ * @param __VALUE__ Value to be written in the register
+ * @retval None
+ */
+#define LL_SPI_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__))
+
+/**
+ * @brief Read a value in SPI register
+ * @param __INSTANCE__ SPI Instance
+ * @param __REG__ Register to be read
+ * @retval Register value
+ */
+#define LL_SPI_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup SPI_LL_Exported_Functions SPI Exported Functions
+ * @{
+ */
+
+/** @defgroup SPI_LL_EF_Configuration Configuration
+ * @{
+ */
+
+/**
+ * @brief Enable SPI peripheral
+ * @rmtoll CR1 SPE LL_SPI_Enable
+ * @param SPIx SPI Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_SPI_Enable(SPI_TypeDef *SPIx)
+{
+ SET_BIT(SPIx->CR1, SPI_CR1_SPE);
+}
+
+/**
+ * @brief Disable SPI peripheral
+ * @note When disabling the SPI, follow the procedure described in the Reference Manual.
+ * @rmtoll CR1 SPE LL_SPI_Disable
+ * @param SPIx SPI Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_SPI_Disable(SPI_TypeDef *SPIx)
+{
+ CLEAR_BIT(SPIx->CR1, SPI_CR1_SPE);
+}
+
+/**
+ * @brief Check if SPI peripheral is enabled
+ * @rmtoll CR1 SPE LL_SPI_IsEnabled
+ * @param SPIx SPI Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SPI_IsEnabled(SPI_TypeDef *SPIx)
+{
+ return ((READ_BIT(SPIx->CR1, SPI_CR1_SPE) == (SPI_CR1_SPE)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Set SPI operation mode to Master or Slave
+ * @note This bit should not be changed when communication is ongoing.
+ * @rmtoll CR1 MSTR LL_SPI_SetMode\n
+ * CR1 SSI LL_SPI_SetMode
+ * @param SPIx SPI Instance
+ * @param Mode This parameter can be one of the following values:
+ * @arg @ref LL_SPI_MODE_MASTER
+ * @arg @ref LL_SPI_MODE_SLAVE
+ * @retval None
+ */
+__STATIC_INLINE void LL_SPI_SetMode(SPI_TypeDef *SPIx, uint32_t Mode)
+{
+ MODIFY_REG(SPIx->CR1, SPI_CR1_MSTR | SPI_CR1_SSI, Mode);
+}
+
+/**
+ * @brief Get SPI operation mode (Master or Slave)
+ * @rmtoll CR1 MSTR LL_SPI_GetMode\n
+ * CR1 SSI LL_SPI_GetMode
+ * @param SPIx SPI Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_SPI_MODE_MASTER
+ * @arg @ref LL_SPI_MODE_SLAVE
+ */
+__STATIC_INLINE uint32_t LL_SPI_GetMode(SPI_TypeDef *SPIx)
+{
+ return (uint32_t)(READ_BIT(SPIx->CR1, SPI_CR1_MSTR | SPI_CR1_SSI));
+}
+
+/**
+ * @brief Set serial protocol used
+ * @note This bit should be written only when SPI is disabled (SPE = 0) for correct operation.
+ * @rmtoll CR2 FRF LL_SPI_SetStandard
+ * @param SPIx SPI Instance
+ * @param Standard This parameter can be one of the following values:
+ * @arg @ref LL_SPI_PROTOCOL_MOTOROLA
+ * @arg @ref LL_SPI_PROTOCOL_TI
+ * @retval None
+ */
+__STATIC_INLINE void LL_SPI_SetStandard(SPI_TypeDef *SPIx, uint32_t Standard)
+{
+ MODIFY_REG(SPIx->CR2, SPI_CR2_FRF, Standard);
+}
+
+/**
+ * @brief Get serial protocol used
+ * @rmtoll CR2 FRF LL_SPI_GetStandard
+ * @param SPIx SPI Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_SPI_PROTOCOL_MOTOROLA
+ * @arg @ref LL_SPI_PROTOCOL_TI
+ */
+__STATIC_INLINE uint32_t LL_SPI_GetStandard(SPI_TypeDef *SPIx)
+{
+ return (uint32_t)(READ_BIT(SPIx->CR2, SPI_CR2_FRF));
+}
+
+/**
+ * @brief Set clock phase
+ * @note This bit should not be changed when communication is ongoing.
+ * This bit is not used in SPI TI mode.
+ * @rmtoll CR1 CPHA LL_SPI_SetClockPhase
+ * @param SPIx SPI Instance
+ * @param ClockPhase This parameter can be one of the following values:
+ * @arg @ref LL_SPI_PHASE_1EDGE
+ * @arg @ref LL_SPI_PHASE_2EDGE
+ * @retval None
+ */
+__STATIC_INLINE void LL_SPI_SetClockPhase(SPI_TypeDef *SPIx, uint32_t ClockPhase)
+{
+ MODIFY_REG(SPIx->CR1, SPI_CR1_CPHA, ClockPhase);
+}
+
+/**
+ * @brief Get clock phase
+ * @rmtoll CR1 CPHA LL_SPI_GetClockPhase
+ * @param SPIx SPI Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_SPI_PHASE_1EDGE
+ * @arg @ref LL_SPI_PHASE_2EDGE
+ */
+__STATIC_INLINE uint32_t LL_SPI_GetClockPhase(SPI_TypeDef *SPIx)
+{
+ return (uint32_t)(READ_BIT(SPIx->CR1, SPI_CR1_CPHA));
+}
+
+/**
+ * @brief Set clock polarity
+ * @note This bit should not be changed when communication is ongoing.
+ * This bit is not used in SPI TI mode.
+ * @rmtoll CR1 CPOL LL_SPI_SetClockPolarity
+ * @param SPIx SPI Instance
+ * @param ClockPolarity This parameter can be one of the following values:
+ * @arg @ref LL_SPI_POLARITY_LOW
+ * @arg @ref LL_SPI_POLARITY_HIGH
+ * @retval None
+ */
+__STATIC_INLINE void LL_SPI_SetClockPolarity(SPI_TypeDef *SPIx, uint32_t ClockPolarity)
+{
+ MODIFY_REG(SPIx->CR1, SPI_CR1_CPOL, ClockPolarity);
+}
+
+/**
+ * @brief Get clock polarity
+ * @rmtoll CR1 CPOL LL_SPI_GetClockPolarity
+ * @param SPIx SPI Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_SPI_POLARITY_LOW
+ * @arg @ref LL_SPI_POLARITY_HIGH
+ */
+__STATIC_INLINE uint32_t LL_SPI_GetClockPolarity(SPI_TypeDef *SPIx)
+{
+ return (uint32_t)(READ_BIT(SPIx->CR1, SPI_CR1_CPOL));
+}
+
+/**
+ * @brief Set baud rate prescaler
+ * @note These bits should not be changed when communication is ongoing. SPI BaudRate = fPCLK/Prescaler.
+ * @rmtoll CR1 BR LL_SPI_SetBaudRatePrescaler
+ * @param SPIx SPI Instance
+ * @param BaudRate This parameter can be one of the following values:
+ * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV2
+ * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV4
+ * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV8
+ * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV16
+ * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV32
+ * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV64
+ * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV128
+ * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV256
+ * @retval None
+ */
+__STATIC_INLINE void LL_SPI_SetBaudRatePrescaler(SPI_TypeDef *SPIx, uint32_t BaudRate)
+{
+ MODIFY_REG(SPIx->CR1, SPI_CR1_BR, BaudRate);
+}
+
+/**
+ * @brief Get baud rate prescaler
+ * @rmtoll CR1 BR LL_SPI_GetBaudRatePrescaler
+ * @param SPIx SPI Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV2
+ * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV4
+ * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV8
+ * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV16
+ * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV32
+ * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV64
+ * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV128
+ * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV256
+ */
+__STATIC_INLINE uint32_t LL_SPI_GetBaudRatePrescaler(SPI_TypeDef *SPIx)
+{
+ return (uint32_t)(READ_BIT(SPIx->CR1, SPI_CR1_BR));
+}
+
+/**
+ * @brief Set transfer bit order
+ * @note This bit should not be changed when communication is ongoing. This bit is not used in SPI TI mode.
+ * @rmtoll CR1 LSBFIRST LL_SPI_SetTransferBitOrder
+ * @param SPIx SPI Instance
+ * @param BitOrder This parameter can be one of the following values:
+ * @arg @ref LL_SPI_LSB_FIRST
+ * @arg @ref LL_SPI_MSB_FIRST
+ * @retval None
+ */
+__STATIC_INLINE void LL_SPI_SetTransferBitOrder(SPI_TypeDef *SPIx, uint32_t BitOrder)
+{
+ MODIFY_REG(SPIx->CR1, SPI_CR1_LSBFIRST, BitOrder);
+}
+
+/**
+ * @brief Get transfer bit order
+ * @rmtoll CR1 LSBFIRST LL_SPI_GetTransferBitOrder
+ * @param SPIx SPI Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_SPI_LSB_FIRST
+ * @arg @ref LL_SPI_MSB_FIRST
+ */
+__STATIC_INLINE uint32_t LL_SPI_GetTransferBitOrder(SPI_TypeDef *SPIx)
+{
+ return (uint32_t)(READ_BIT(SPIx->CR1, SPI_CR1_LSBFIRST));
+}
+
+/**
+ * @brief Set transfer direction mode
+ * @note For Half-Duplex mode, Rx Direction is set by default.
+ * In master mode, the MOSI pin is used and in slave mode, the MISO pin is used for Half-Duplex.
+ * @rmtoll CR1 RXONLY LL_SPI_SetTransferDirection\n
+ * CR1 BIDIMODE LL_SPI_SetTransferDirection\n
+ * CR1 BIDIOE LL_SPI_SetTransferDirection
+ * @param SPIx SPI Instance
+ * @param TransferDirection This parameter can be one of the following values:
+ * @arg @ref LL_SPI_FULL_DUPLEX
+ * @arg @ref LL_SPI_SIMPLEX_RX
+ * @arg @ref LL_SPI_HALF_DUPLEX_RX
+ * @arg @ref LL_SPI_HALF_DUPLEX_TX
+ * @retval None
+ */
+__STATIC_INLINE void LL_SPI_SetTransferDirection(SPI_TypeDef *SPIx, uint32_t TransferDirection)
+{
+ MODIFY_REG(SPIx->CR1, SPI_CR1_RXONLY | SPI_CR1_BIDIMODE | SPI_CR1_BIDIOE, TransferDirection);
+}
+
+/**
+ * @brief Get transfer direction mode
+ * @rmtoll CR1 RXONLY LL_SPI_GetTransferDirection\n
+ * CR1 BIDIMODE LL_SPI_GetTransferDirection\n
+ * CR1 BIDIOE LL_SPI_GetTransferDirection
+ * @param SPIx SPI Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_SPI_FULL_DUPLEX
+ * @arg @ref LL_SPI_SIMPLEX_RX
+ * @arg @ref LL_SPI_HALF_DUPLEX_RX
+ * @arg @ref LL_SPI_HALF_DUPLEX_TX
+ */
+__STATIC_INLINE uint32_t LL_SPI_GetTransferDirection(SPI_TypeDef *SPIx)
+{
+ return (uint32_t)(READ_BIT(SPIx->CR1, SPI_CR1_RXONLY | SPI_CR1_BIDIMODE | SPI_CR1_BIDIOE));
+}
+
+/**
+ * @brief Set frame data width
+ * @rmtoll CR2 DS LL_SPI_SetDataWidth
+ * @param SPIx SPI Instance
+ * @param DataWidth This parameter can be one of the following values:
+ * @arg @ref LL_SPI_DATAWIDTH_4BIT
+ * @arg @ref LL_SPI_DATAWIDTH_5BIT
+ * @arg @ref LL_SPI_DATAWIDTH_6BIT
+ * @arg @ref LL_SPI_DATAWIDTH_7BIT
+ * @arg @ref LL_SPI_DATAWIDTH_8BIT
+ * @arg @ref LL_SPI_DATAWIDTH_9BIT
+ * @arg @ref LL_SPI_DATAWIDTH_10BIT
+ * @arg @ref LL_SPI_DATAWIDTH_11BIT
+ * @arg @ref LL_SPI_DATAWIDTH_12BIT
+ * @arg @ref LL_SPI_DATAWIDTH_13BIT
+ * @arg @ref LL_SPI_DATAWIDTH_14BIT
+ * @arg @ref LL_SPI_DATAWIDTH_15BIT
+ * @arg @ref LL_SPI_DATAWIDTH_16BIT
+ * @retval None
+ */
+__STATIC_INLINE void LL_SPI_SetDataWidth(SPI_TypeDef *SPIx, uint32_t DataWidth)
+{
+ MODIFY_REG(SPIx->CR2, SPI_CR2_DS, DataWidth);
+}
+
+/**
+ * @brief Get frame data width
+ * @rmtoll CR2 DS LL_SPI_GetDataWidth
+ * @param SPIx SPI Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_SPI_DATAWIDTH_4BIT
+ * @arg @ref LL_SPI_DATAWIDTH_5BIT
+ * @arg @ref LL_SPI_DATAWIDTH_6BIT
+ * @arg @ref LL_SPI_DATAWIDTH_7BIT
+ * @arg @ref LL_SPI_DATAWIDTH_8BIT
+ * @arg @ref LL_SPI_DATAWIDTH_9BIT
+ * @arg @ref LL_SPI_DATAWIDTH_10BIT
+ * @arg @ref LL_SPI_DATAWIDTH_11BIT
+ * @arg @ref LL_SPI_DATAWIDTH_12BIT
+ * @arg @ref LL_SPI_DATAWIDTH_13BIT
+ * @arg @ref LL_SPI_DATAWIDTH_14BIT
+ * @arg @ref LL_SPI_DATAWIDTH_15BIT
+ * @arg @ref LL_SPI_DATAWIDTH_16BIT
+ */
+__STATIC_INLINE uint32_t LL_SPI_GetDataWidth(SPI_TypeDef *SPIx)
+{
+ return (uint32_t)(READ_BIT(SPIx->CR2, SPI_CR2_DS));
+}
+
+/**
+ * @brief Set threshold of RXFIFO that triggers an RXNE event
+ * @rmtoll CR2 FRXTH LL_SPI_SetRxFIFOThreshold
+ * @param SPIx SPI Instance
+ * @param Threshold This parameter can be one of the following values:
+ * @arg @ref LL_SPI_RX_FIFO_TH_HALF
+ * @arg @ref LL_SPI_RX_FIFO_TH_QUARTER
+ * @retval None
+ */
+__STATIC_INLINE void LL_SPI_SetRxFIFOThreshold(SPI_TypeDef *SPIx, uint32_t Threshold)
+{
+ MODIFY_REG(SPIx->CR2, SPI_CR2_FRXTH, Threshold);
+}
+
+/**
+ * @brief Get threshold of RXFIFO that triggers an RXNE event
+ * @rmtoll CR2 FRXTH LL_SPI_GetRxFIFOThreshold
+ * @param SPIx SPI Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_SPI_RX_FIFO_TH_HALF
+ * @arg @ref LL_SPI_RX_FIFO_TH_QUARTER
+ */
+__STATIC_INLINE uint32_t LL_SPI_GetRxFIFOThreshold(SPI_TypeDef *SPIx)
+{
+ return (uint32_t)(READ_BIT(SPIx->CR2, SPI_CR2_FRXTH));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup SPI_LL_EF_CRC_Management CRC Management
+ * @{
+ */
+
+/**
+ * @brief Enable CRC
+ * @note This bit should be written only when SPI is disabled (SPE = 0) for correct operation.
+ * @rmtoll CR1 CRCEN LL_SPI_EnableCRC
+ * @param SPIx SPI Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_SPI_EnableCRC(SPI_TypeDef *SPIx)
+{
+ SET_BIT(SPIx->CR1, SPI_CR1_CRCEN);
+}
+
+/**
+ * @brief Disable CRC
+ * @note This bit should be written only when SPI is disabled (SPE = 0) for correct operation.
+ * @rmtoll CR1 CRCEN LL_SPI_DisableCRC
+ * @param SPIx SPI Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_SPI_DisableCRC(SPI_TypeDef *SPIx)
+{
+ CLEAR_BIT(SPIx->CR1, SPI_CR1_CRCEN);
+}
+
+/**
+ * @brief Check if CRC is enabled
+ * @note This bit should be written only when SPI is disabled (SPE = 0) for correct operation.
+ * @rmtoll CR1 CRCEN LL_SPI_IsEnabledCRC
+ * @param SPIx SPI Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SPI_IsEnabledCRC(SPI_TypeDef *SPIx)
+{
+ return ((READ_BIT(SPIx->CR1, SPI_CR1_CRCEN) == (SPI_CR1_CRCEN)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Set CRC Length
+ * @note This bit should be written only when SPI is disabled (SPE = 0) for correct operation.
+ * @rmtoll CR1 CRCL LL_SPI_SetCRCWidth
+ * @param SPIx SPI Instance
+ * @param CRCLength This parameter can be one of the following values:
+ * @arg @ref LL_SPI_CRC_8BIT
+ * @arg @ref LL_SPI_CRC_16BIT
+ * @retval None
+ */
+__STATIC_INLINE void LL_SPI_SetCRCWidth(SPI_TypeDef *SPIx, uint32_t CRCLength)
+{
+ MODIFY_REG(SPIx->CR1, SPI_CR1_CRCL, CRCLength);
+}
+
+/**
+ * @brief Get CRC Length
+ * @rmtoll CR1 CRCL LL_SPI_GetCRCWidth
+ * @param SPIx SPI Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_SPI_CRC_8BIT
+ * @arg @ref LL_SPI_CRC_16BIT
+ */
+__STATIC_INLINE uint32_t LL_SPI_GetCRCWidth(SPI_TypeDef *SPIx)
+{
+ return (uint32_t)(READ_BIT(SPIx->CR1, SPI_CR1_CRCL));
+}
+
+/**
+ * @brief Set CRCNext to transfer CRC on the line
+ * @note This bit has to be written as soon as the last data is written in the SPIx_DR register.
+ * @rmtoll CR1 CRCNEXT LL_SPI_SetCRCNext
+ * @param SPIx SPI Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_SPI_SetCRCNext(SPI_TypeDef *SPIx)
+{
+ SET_BIT(SPIx->CR1, SPI_CR1_CRCNEXT);
+}
+
+/**
+ * @brief Set polynomial for CRC calculation
+ * @rmtoll CRCPR CRCPOLY LL_SPI_SetCRCPolynomial
+ * @param SPIx SPI Instance
+ * @param CRCPoly This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFFFF
+ * @retval None
+ */
+__STATIC_INLINE void LL_SPI_SetCRCPolynomial(SPI_TypeDef *SPIx, uint32_t CRCPoly)
+{
+ WRITE_REG(SPIx->CRCPR, (uint16_t)CRCPoly);
+}
+
+/**
+ * @brief Get polynomial for CRC calculation
+ * @rmtoll CRCPR CRCPOLY LL_SPI_GetCRCPolynomial
+ * @param SPIx SPI Instance
+ * @retval Returned value is a number between Min_Data = 0x00 and Max_Data = 0xFFFF
+ */
+__STATIC_INLINE uint32_t LL_SPI_GetCRCPolynomial(SPI_TypeDef *SPIx)
+{
+ return (uint32_t)(READ_REG(SPIx->CRCPR));
+}
+
+/**
+ * @brief Get Rx CRC
+ * @rmtoll RXCRCR RXCRC LL_SPI_GetRxCRC
+ * @param SPIx SPI Instance
+ * @retval Returned value is a number between Min_Data = 0x00 and Max_Data = 0xFFFF
+ */
+__STATIC_INLINE uint32_t LL_SPI_GetRxCRC(SPI_TypeDef *SPIx)
+{
+ return (uint32_t)(READ_REG(SPIx->RXCRCR));
+}
+
+/**
+ * @brief Get Tx CRC
+ * @rmtoll TXCRCR TXCRC LL_SPI_GetTxCRC
+ * @param SPIx SPI Instance
+ * @retval Returned value is a number between Min_Data = 0x00 and Max_Data = 0xFFFF
+ */
+__STATIC_INLINE uint32_t LL_SPI_GetTxCRC(SPI_TypeDef *SPIx)
+{
+ return (uint32_t)(READ_REG(SPIx->TXCRCR));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup SPI_LL_EF_NSS_Management Slave Select Pin Management
+ * @{
+ */
+
+/**
+ * @brief Set NSS mode
+ * @note LL_SPI_NSS_SOFT Mode is not used in SPI TI mode.
+ * @rmtoll CR1 SSM LL_SPI_SetNSSMode\n
+ * @rmtoll CR2 SSOE LL_SPI_SetNSSMode
+ * @param SPIx SPI Instance
+ * @param NSS This parameter can be one of the following values:
+ * @arg @ref LL_SPI_NSS_SOFT
+ * @arg @ref LL_SPI_NSS_HARD_INPUT
+ * @arg @ref LL_SPI_NSS_HARD_OUTPUT
+ * @retval None
+ */
+__STATIC_INLINE void LL_SPI_SetNSSMode(SPI_TypeDef *SPIx, uint32_t NSS)
+{
+ MODIFY_REG(SPIx->CR1, SPI_CR1_SSM, NSS);
+ MODIFY_REG(SPIx->CR2, SPI_CR2_SSOE, ((uint32_t)(NSS >> 16U)));
+}
+
+/**
+ * @brief Get NSS mode
+ * @rmtoll CR1 SSM LL_SPI_GetNSSMode\n
+ * @rmtoll CR2 SSOE LL_SPI_GetNSSMode
+ * @param SPIx SPI Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_SPI_NSS_SOFT
+ * @arg @ref LL_SPI_NSS_HARD_INPUT
+ * @arg @ref LL_SPI_NSS_HARD_OUTPUT
+ */
+__STATIC_INLINE uint32_t LL_SPI_GetNSSMode(SPI_TypeDef *SPIx)
+{
+ register uint32_t Ssm = (READ_BIT(SPIx->CR1, SPI_CR1_SSM));
+ register uint32_t Ssoe = (READ_BIT(SPIx->CR2, SPI_CR2_SSOE) << 16U);
+ return (Ssm | Ssoe);
+}
+
+/**
+ * @brief Enable NSS pulse management
+ * @note This bit should not be changed when communication is ongoing. This bit is not used in SPI TI mode.
+ * @rmtoll CR2 NSSP LL_SPI_EnableNSSPulseMgt
+ * @param SPIx SPI Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_SPI_EnableNSSPulseMgt(SPI_TypeDef *SPIx)
+{
+ SET_BIT(SPIx->CR2, SPI_CR2_NSSP);
+}
+
+/**
+ * @brief Disable NSS pulse management
+ * @note This bit should not be changed when communication is ongoing. This bit is not used in SPI TI mode.
+ * @rmtoll CR2 NSSP LL_SPI_DisableNSSPulseMgt
+ * @param SPIx SPI Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_SPI_DisableNSSPulseMgt(SPI_TypeDef *SPIx)
+{
+ CLEAR_BIT(SPIx->CR2, SPI_CR2_NSSP);
+}
+
+/**
+ * @brief Check if NSS pulse is enabled
+ * @note This bit should not be changed when communication is ongoing. This bit is not used in SPI TI mode.
+ * @rmtoll CR2 NSSP LL_SPI_IsEnabledNSSPulse
+ * @param SPIx SPI Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SPI_IsEnabledNSSPulse(SPI_TypeDef *SPIx)
+{
+ return ((READ_BIT(SPIx->CR2, SPI_CR2_NSSP) == (SPI_CR2_NSSP)) ? 1UL : 0UL);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup SPI_LL_EF_FLAG_Management FLAG Management
+ * @{
+ */
+
+/**
+ * @brief Check if Rx buffer is not empty
+ * @rmtoll SR RXNE LL_SPI_IsActiveFlag_RXNE
+ * @param SPIx SPI Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SPI_IsActiveFlag_RXNE(SPI_TypeDef *SPIx)
+{
+ return ((READ_BIT(SPIx->SR, SPI_SR_RXNE) == (SPI_SR_RXNE)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Check if Tx buffer is empty
+ * @rmtoll SR TXE LL_SPI_IsActiveFlag_TXE
+ * @param SPIx SPI Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SPI_IsActiveFlag_TXE(SPI_TypeDef *SPIx)
+{
+ return ((READ_BIT(SPIx->SR, SPI_SR_TXE) == (SPI_SR_TXE)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Get CRC error flag
+ * @rmtoll SR CRCERR LL_SPI_IsActiveFlag_CRCERR
+ * @param SPIx SPI Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SPI_IsActiveFlag_CRCERR(SPI_TypeDef *SPIx)
+{
+ return ((READ_BIT(SPIx->SR, SPI_SR_CRCERR) == (SPI_SR_CRCERR)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Get mode fault error flag
+ * @rmtoll SR MODF LL_SPI_IsActiveFlag_MODF
+ * @param SPIx SPI Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SPI_IsActiveFlag_MODF(SPI_TypeDef *SPIx)
+{
+ return ((READ_BIT(SPIx->SR, SPI_SR_MODF) == (SPI_SR_MODF)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Get overrun error flag
+ * @rmtoll SR OVR LL_SPI_IsActiveFlag_OVR
+ * @param SPIx SPI Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SPI_IsActiveFlag_OVR(SPI_TypeDef *SPIx)
+{
+ return ((READ_BIT(SPIx->SR, SPI_SR_OVR) == (SPI_SR_OVR)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Get busy flag
+ * @note The BSY flag is cleared under any one of the following conditions:
+ * -When the SPI is correctly disabled
+ * -When a fault is detected in Master mode (MODF bit set to 1)
+ * -In Master mode, when it finishes a data transmission and no new data is ready to be
+ * sent
+ * -In Slave mode, when the BSY flag is set to '0' for at least one SPI clock cycle between
+ * each data transfer.
+ * @rmtoll SR BSY LL_SPI_IsActiveFlag_BSY
+ * @param SPIx SPI Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SPI_IsActiveFlag_BSY(SPI_TypeDef *SPIx)
+{
+ return ((READ_BIT(SPIx->SR, SPI_SR_BSY) == (SPI_SR_BSY)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Get frame format error flag
+ * @rmtoll SR FRE LL_SPI_IsActiveFlag_FRE
+ * @param SPIx SPI Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SPI_IsActiveFlag_FRE(SPI_TypeDef *SPIx)
+{
+ return ((READ_BIT(SPIx->SR, SPI_SR_FRE) == (SPI_SR_FRE)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Get FIFO reception Level
+ * @rmtoll SR FRLVL LL_SPI_GetRxFIFOLevel
+ * @param SPIx SPI Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_SPI_RX_FIFO_EMPTY
+ * @arg @ref LL_SPI_RX_FIFO_QUARTER_FULL
+ * @arg @ref LL_SPI_RX_FIFO_HALF_FULL
+ * @arg @ref LL_SPI_RX_FIFO_FULL
+ */
+__STATIC_INLINE uint32_t LL_SPI_GetRxFIFOLevel(SPI_TypeDef *SPIx)
+{
+ return (uint32_t)(READ_BIT(SPIx->SR, SPI_SR_FRLVL));
+}
+
+/**
+ * @brief Get FIFO Transmission Level
+ * @rmtoll SR FTLVL LL_SPI_GetTxFIFOLevel
+ * @param SPIx SPI Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_SPI_TX_FIFO_EMPTY
+ * @arg @ref LL_SPI_TX_FIFO_QUARTER_FULL
+ * @arg @ref LL_SPI_TX_FIFO_HALF_FULL
+ * @arg @ref LL_SPI_TX_FIFO_FULL
+ */
+__STATIC_INLINE uint32_t LL_SPI_GetTxFIFOLevel(SPI_TypeDef *SPIx)
+{
+ return (uint32_t)(READ_BIT(SPIx->SR, SPI_SR_FTLVL));
+}
+
+/**
+ * @brief Clear CRC error flag
+ * @rmtoll SR CRCERR LL_SPI_ClearFlag_CRCERR
+ * @param SPIx SPI Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_SPI_ClearFlag_CRCERR(SPI_TypeDef *SPIx)
+{
+ CLEAR_BIT(SPIx->SR, SPI_SR_CRCERR);
+}
+
+/**
+ * @brief Clear mode fault error flag
+ * @note Clearing this flag is done by a read access to the SPIx_SR
+ * register followed by a write access to the SPIx_CR1 register
+ * @rmtoll SR MODF LL_SPI_ClearFlag_MODF
+ * @param SPIx SPI Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_SPI_ClearFlag_MODF(SPI_TypeDef *SPIx)
+{
+ __IO uint32_t tmpreg_sr;
+ tmpreg_sr = SPIx->SR;
+ (void) tmpreg_sr;
+ CLEAR_BIT(SPIx->CR1, SPI_CR1_SPE);
+}
+
+/**
+ * @brief Clear overrun error flag
+ * @note Clearing this flag is done by a read access to the SPIx_DR
+ * register followed by a read access to the SPIx_SR register
+ * @rmtoll SR OVR LL_SPI_ClearFlag_OVR
+ * @param SPIx SPI Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_SPI_ClearFlag_OVR(SPI_TypeDef *SPIx)
+{
+ __IO uint32_t tmpreg;
+ tmpreg = SPIx->DR;
+ (void) tmpreg;
+ tmpreg = SPIx->SR;
+ (void) tmpreg;
+}
+
+/**
+ * @brief Clear frame format error flag
+ * @note Clearing this flag is done by reading SPIx_SR register
+ * @rmtoll SR FRE LL_SPI_ClearFlag_FRE
+ * @param SPIx SPI Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_SPI_ClearFlag_FRE(SPI_TypeDef *SPIx)
+{
+ __IO uint32_t tmpreg;
+ tmpreg = SPIx->SR;
+ (void) tmpreg;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup SPI_LL_EF_IT_Management Interrupt Management
+ * @{
+ */
+
+/**
+ * @brief Enable error interrupt
+ * @note This bit controls the generation of an interrupt when an error condition occurs (CRCERR, OVR, MODF in SPI mode, FRE at TI mode).
+ * @rmtoll CR2 ERRIE LL_SPI_EnableIT_ERR
+ * @param SPIx SPI Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_SPI_EnableIT_ERR(SPI_TypeDef *SPIx)
+{
+ SET_BIT(SPIx->CR2, SPI_CR2_ERRIE);
+}
+
+/**
+ * @brief Enable Rx buffer not empty interrupt
+ * @rmtoll CR2 RXNEIE LL_SPI_EnableIT_RXNE
+ * @param SPIx SPI Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_SPI_EnableIT_RXNE(SPI_TypeDef *SPIx)
+{
+ SET_BIT(SPIx->CR2, SPI_CR2_RXNEIE);
+}
+
+/**
+ * @brief Enable Tx buffer empty interrupt
+ * @rmtoll CR2 TXEIE LL_SPI_EnableIT_TXE
+ * @param SPIx SPI Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_SPI_EnableIT_TXE(SPI_TypeDef *SPIx)
+{
+ SET_BIT(SPIx->CR2, SPI_CR2_TXEIE);
+}
+
+/**
+ * @brief Disable error interrupt
+ * @note This bit controls the generation of an interrupt when an error condition occurs (CRCERR, OVR, MODF in SPI mode, FRE at TI mode).
+ * @rmtoll CR2 ERRIE LL_SPI_DisableIT_ERR
+ * @param SPIx SPI Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_SPI_DisableIT_ERR(SPI_TypeDef *SPIx)
+{
+ CLEAR_BIT(SPIx->CR2, SPI_CR2_ERRIE);
+}
+
+/**
+ * @brief Disable Rx buffer not empty interrupt
+ * @rmtoll CR2 RXNEIE LL_SPI_DisableIT_RXNE
+ * @param SPIx SPI Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_SPI_DisableIT_RXNE(SPI_TypeDef *SPIx)
+{
+ CLEAR_BIT(SPIx->CR2, SPI_CR2_RXNEIE);
+}
+
+/**
+ * @brief Disable Tx buffer empty interrupt
+ * @rmtoll CR2 TXEIE LL_SPI_DisableIT_TXE
+ * @param SPIx SPI Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_SPI_DisableIT_TXE(SPI_TypeDef *SPIx)
+{
+ CLEAR_BIT(SPIx->CR2, SPI_CR2_TXEIE);
+}
+
+/**
+ * @brief Check if error interrupt is enabled
+ * @rmtoll CR2 ERRIE LL_SPI_IsEnabledIT_ERR
+ * @param SPIx SPI Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SPI_IsEnabledIT_ERR(SPI_TypeDef *SPIx)
+{
+ return ((READ_BIT(SPIx->CR2, SPI_CR2_ERRIE) == (SPI_CR2_ERRIE)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Check if Rx buffer not empty interrupt is enabled
+ * @rmtoll CR2 RXNEIE LL_SPI_IsEnabledIT_RXNE
+ * @param SPIx SPI Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SPI_IsEnabledIT_RXNE(SPI_TypeDef *SPIx)
+{
+ return ((READ_BIT(SPIx->CR2, SPI_CR2_RXNEIE) == (SPI_CR2_RXNEIE)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Check if Tx buffer empty interrupt
+ * @rmtoll CR2 TXEIE LL_SPI_IsEnabledIT_TXE
+ * @param SPIx SPI Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SPI_IsEnabledIT_TXE(SPI_TypeDef *SPIx)
+{
+ return ((READ_BIT(SPIx->CR2, SPI_CR2_TXEIE) == (SPI_CR2_TXEIE)) ? 1UL : 0UL);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup SPI_LL_EF_DMA_Management DMA Management
+ * @{
+ */
+
+/**
+ * @brief Enable DMA Rx
+ * @rmtoll CR2 RXDMAEN LL_SPI_EnableDMAReq_RX
+ * @param SPIx SPI Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_SPI_EnableDMAReq_RX(SPI_TypeDef *SPIx)
+{
+ SET_BIT(SPIx->CR2, SPI_CR2_RXDMAEN);
+}
+
+/**
+ * @brief Disable DMA Rx
+ * @rmtoll CR2 RXDMAEN LL_SPI_DisableDMAReq_RX
+ * @param SPIx SPI Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_SPI_DisableDMAReq_RX(SPI_TypeDef *SPIx)
+{
+ CLEAR_BIT(SPIx->CR2, SPI_CR2_RXDMAEN);
+}
+
+/**
+ * @brief Check if DMA Rx is enabled
+ * @rmtoll CR2 RXDMAEN LL_SPI_IsEnabledDMAReq_RX
+ * @param SPIx SPI Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SPI_IsEnabledDMAReq_RX(SPI_TypeDef *SPIx)
+{
+ return ((READ_BIT(SPIx->CR2, SPI_CR2_RXDMAEN) == (SPI_CR2_RXDMAEN)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Enable DMA Tx
+ * @rmtoll CR2 TXDMAEN LL_SPI_EnableDMAReq_TX
+ * @param SPIx SPI Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_SPI_EnableDMAReq_TX(SPI_TypeDef *SPIx)
+{
+ SET_BIT(SPIx->CR2, SPI_CR2_TXDMAEN);
+}
+
+/**
+ * @brief Disable DMA Tx
+ * @rmtoll CR2 TXDMAEN LL_SPI_DisableDMAReq_TX
+ * @param SPIx SPI Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_SPI_DisableDMAReq_TX(SPI_TypeDef *SPIx)
+{
+ CLEAR_BIT(SPIx->CR2, SPI_CR2_TXDMAEN);
+}
+
+/**
+ * @brief Check if DMA Tx is enabled
+ * @rmtoll CR2 TXDMAEN LL_SPI_IsEnabledDMAReq_TX
+ * @param SPIx SPI Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SPI_IsEnabledDMAReq_TX(SPI_TypeDef *SPIx)
+{
+ return ((READ_BIT(SPIx->CR2, SPI_CR2_TXDMAEN) == (SPI_CR2_TXDMAEN)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Set parity of Last DMA reception
+ * @rmtoll CR2 LDMARX LL_SPI_SetDMAParity_RX
+ * @param SPIx SPI Instance
+ * @param Parity This parameter can be one of the following values:
+ * @arg @ref LL_SPI_DMA_PARITY_ODD
+ * @arg @ref LL_SPI_DMA_PARITY_EVEN
+ * @retval None
+ */
+__STATIC_INLINE void LL_SPI_SetDMAParity_RX(SPI_TypeDef *SPIx, uint32_t Parity)
+{
+ MODIFY_REG(SPIx->CR2, SPI_CR2_LDMARX, (Parity << SPI_CR2_LDMARX_Pos));
+}
+
+/**
+ * @brief Get parity configuration for Last DMA reception
+ * @rmtoll CR2 LDMARX LL_SPI_GetDMAParity_RX
+ * @param SPIx SPI Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_SPI_DMA_PARITY_ODD
+ * @arg @ref LL_SPI_DMA_PARITY_EVEN
+ */
+__STATIC_INLINE uint32_t LL_SPI_GetDMAParity_RX(SPI_TypeDef *SPIx)
+{
+ return (uint32_t)(READ_BIT(SPIx->CR2, SPI_CR2_LDMARX) >> SPI_CR2_LDMARX_Pos);
+}
+
+/**
+ * @brief Set parity of Last DMA transmission
+ * @rmtoll CR2 LDMATX LL_SPI_SetDMAParity_TX
+ * @param SPIx SPI Instance
+ * @param Parity This parameter can be one of the following values:
+ * @arg @ref LL_SPI_DMA_PARITY_ODD
+ * @arg @ref LL_SPI_DMA_PARITY_EVEN
+ * @retval None
+ */
+__STATIC_INLINE void LL_SPI_SetDMAParity_TX(SPI_TypeDef *SPIx, uint32_t Parity)
+{
+ MODIFY_REG(SPIx->CR2, SPI_CR2_LDMATX, (Parity << SPI_CR2_LDMATX_Pos));
+}
+
+/**
+ * @brief Get parity configuration for Last DMA transmission
+ * @rmtoll CR2 LDMATX LL_SPI_GetDMAParity_TX
+ * @param SPIx SPI Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_SPI_DMA_PARITY_ODD
+ * @arg @ref LL_SPI_DMA_PARITY_EVEN
+ */
+__STATIC_INLINE uint32_t LL_SPI_GetDMAParity_TX(SPI_TypeDef *SPIx)
+{
+ return (uint32_t)(READ_BIT(SPIx->CR2, SPI_CR2_LDMATX) >> SPI_CR2_LDMATX_Pos);
+}
+
+/**
+ * @brief Get the data register address used for DMA transfer
+ * @rmtoll DR DR LL_SPI_DMA_GetRegAddr
+ * @param SPIx SPI Instance
+ * @retval Address of data register
+ */
+__STATIC_INLINE uint32_t LL_SPI_DMA_GetRegAddr(SPI_TypeDef *SPIx)
+{
+ return (uint32_t) &(SPIx->DR);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup SPI_LL_EF_DATA_Management DATA Management
+ * @{
+ */
+
+/**
+ * @brief Read 8-Bits in the data register
+ * @rmtoll DR DR LL_SPI_ReceiveData8
+ * @param SPIx SPI Instance
+ * @retval RxData Value between Min_Data=0x00 and Max_Data=0xFF
+ */
+__STATIC_INLINE uint8_t LL_SPI_ReceiveData8(SPI_TypeDef *SPIx)
+{
+ return (uint8_t)(READ_REG(SPIx->DR));
+}
+
+/**
+ * @brief Read 16-Bits in the data register
+ * @rmtoll DR DR LL_SPI_ReceiveData16
+ * @param SPIx SPI Instance
+ * @retval RxData Value between Min_Data=0x00 and Max_Data=0xFFFF
+ */
+__STATIC_INLINE uint16_t LL_SPI_ReceiveData16(SPI_TypeDef *SPIx)
+{
+ return (uint16_t)(READ_REG(SPIx->DR));
+}
+
+/**
+ * @brief Write 8-Bits in the data register
+ * @rmtoll DR DR LL_SPI_TransmitData8
+ * @param SPIx SPI Instance
+ * @param TxData Value between Min_Data=0x00 and Max_Data=0xFF
+ * @retval None
+ */
+__STATIC_INLINE void LL_SPI_TransmitData8(SPI_TypeDef *SPIx, uint8_t TxData)
+{
+#if defined (__GNUC__)
+ __IO uint8_t *spidr = ((__IO uint8_t *)&SPIx->DR);
+ *spidr = TxData;
+#else
+ *((__IO uint8_t *)&SPIx->DR) = TxData;
+#endif /* __GNUC__ */
+}
+
+/**
+ * @brief Write 16-Bits in the data register
+ * @rmtoll DR DR LL_SPI_TransmitData16
+ * @param SPIx SPI Instance
+ * @param TxData Value between Min_Data=0x00 and Max_Data=0xFFFF
+ * @retval None
+ */
+__STATIC_INLINE void LL_SPI_TransmitData16(SPI_TypeDef *SPIx, uint16_t TxData)
+{
+#if defined (__GNUC__)
+ __IO uint16_t *spidr = ((__IO uint16_t *)&SPIx->DR);
+ *spidr = TxData;
+#else
+ SPIx->DR = TxData;
+#endif /* __GNUC__ */
+}
+
+/**
+ * @}
+ */
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup SPI_LL_EF_Init Initialization and de-initialization functions
+ * @{
+ */
+
+ErrorStatus LL_SPI_DeInit(SPI_TypeDef *SPIx);
+ErrorStatus LL_SPI_Init(SPI_TypeDef *SPIx, LL_SPI_InitTypeDef *SPI_InitStruct);
+void LL_SPI_StructInit(LL_SPI_InitTypeDef *SPI_InitStruct);
+
+/**
+ * @}
+ */
+#endif /* USE_FULL_LL_DRIVER */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#if defined(SPI_I2S_SUPPORT)
+/** @defgroup I2S_LL I2S
+ * @{
+ */
+
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+
+/* Exported types ------------------------------------------------------------*/
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup I2S_LL_ES_INIT I2S Exported Init structure
+ * @{
+ */
+
+/**
+ * @brief I2S Init structure definition
+ */
+
+typedef struct
+{
+ uint32_t Mode; /*!< Specifies the I2S operating mode.
+ This parameter can be a value of @ref I2S_LL_EC_MODE
+
+ This feature can be modified afterwards using unitary function @ref LL_I2S_SetTransferMode().*/
+
+ uint32_t Standard; /*!< Specifies the standard used for the I2S communication.
+ This parameter can be a value of @ref I2S_LL_EC_STANDARD
+
+ This feature can be modified afterwards using unitary function @ref LL_I2S_SetStandard().*/
+
+
+ uint32_t DataFormat; /*!< Specifies the data format for the I2S communication.
+ This parameter can be a value of @ref I2S_LL_EC_DATA_FORMAT
+
+ This feature can be modified afterwards using unitary function @ref LL_I2S_SetDataFormat().*/
+
+
+ uint32_t MCLKOutput; /*!< Specifies whether the I2S MCLK output is enabled or not.
+ This parameter can be a value of @ref I2S_LL_EC_MCLK_OUTPUT
+
+ This feature can be modified afterwards using unitary functions @ref LL_I2S_EnableMasterClock() or @ref LL_I2S_DisableMasterClock.*/
+
+
+ uint32_t AudioFreq; /*!< Specifies the frequency selected for the I2S communication.
+ This parameter can be a value of @ref I2S_LL_EC_AUDIO_FREQ
+
+ Audio Frequency can be modified afterwards using Reference manual formulas to calculate Prescaler Linear, Parity
+ and unitary functions @ref LL_I2S_SetPrescalerLinear() and @ref LL_I2S_SetPrescalerParity() to set it.*/
+
+
+ uint32_t ClockPolarity; /*!< Specifies the idle state of the I2S clock.
+ This parameter can be a value of @ref I2S_LL_EC_POLARITY
+
+ This feature can be modified afterwards using unitary function @ref LL_I2S_SetClockPolarity().*/
+
+} LL_I2S_InitTypeDef;
+
+/**
+ * @}
+ */
+#endif /*USE_FULL_LL_DRIVER*/
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup I2S_LL_Exported_Constants I2S Exported Constants
+ * @{
+ */
+
+/** @defgroup I2S_LL_EC_GET_FLAG Get Flags Defines
+ * @brief Flags defines which can be used with LL_I2S_ReadReg function
+ * @{
+ */
+#define LL_I2S_SR_RXNE LL_SPI_SR_RXNE /*!< Rx buffer not empty flag */
+#define LL_I2S_SR_TXE LL_SPI_SR_TXE /*!< Tx buffer empty flag */
+#define LL_I2S_SR_BSY LL_SPI_SR_BSY /*!< Busy flag */
+#define LL_I2S_SR_UDR SPI_SR_UDR /*!< Underrun flag */
+#define LL_I2S_SR_OVR LL_SPI_SR_OVR /*!< Overrun flag */
+#define LL_I2S_SR_FRE LL_SPI_SR_FRE /*!< TI mode frame format error flag */
+/**
+ * @}
+ */
+
+/** @defgroup SPI_LL_EC_IT IT Defines
+ * @brief IT defines which can be used with LL_SPI_ReadReg and LL_SPI_WriteReg functions
+ * @{
+ */
+#define LL_I2S_CR2_RXNEIE LL_SPI_CR2_RXNEIE /*!< Rx buffer not empty interrupt enable */
+#define LL_I2S_CR2_TXEIE LL_SPI_CR2_TXEIE /*!< Tx buffer empty interrupt enable */
+#define LL_I2S_CR2_ERRIE LL_SPI_CR2_ERRIE /*!< Error interrupt enable */
+/**
+ * @}
+ */
+
+/** @defgroup I2S_LL_EC_DATA_FORMAT Data format
+ * @{
+ */
+#define LL_I2S_DATAFORMAT_16B 0x00000000U /*!< Data length 16 bits, Channel lenght 16bit */
+#define LL_I2S_DATAFORMAT_16B_EXTENDED (SPI_I2SCFGR_CHLEN) /*!< Data length 16 bits, Channel lenght 32bit */
+#define LL_I2S_DATAFORMAT_24B (SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN_0) /*!< Data length 24 bits, Channel lenght 32bit */
+#define LL_I2S_DATAFORMAT_32B (SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN_1) /*!< Data length 16 bits, Channel lenght 32bit */
+/**
+ * @}
+ */
+
+/** @defgroup I2S_LL_EC_POLARITY Clock Polarity
+ * @{
+ */
+#define LL_I2S_POLARITY_LOW 0x00000000U /*!< Clock steady state is low level */
+#define LL_I2S_POLARITY_HIGH (SPI_I2SCFGR_CKPOL) /*!< Clock steady state is high level */
+/**
+ * @}
+ */
+
+/** @defgroup I2S_LL_EC_STANDARD I2s Standard
+ * @{
+ */
+#define LL_I2S_STANDARD_PHILIPS 0x00000000U /*!< I2S standard philips */
+#define LL_I2S_STANDARD_MSB (SPI_I2SCFGR_I2SSTD_0) /*!< MSB justified standard (left justified) */
+#define LL_I2S_STANDARD_LSB (SPI_I2SCFGR_I2SSTD_1) /*!< LSB justified standard (right justified) */
+#define LL_I2S_STANDARD_PCM_SHORT (SPI_I2SCFGR_I2SSTD_0 | SPI_I2SCFGR_I2SSTD_1) /*!< PCM standard, short frame synchronization */
+#define LL_I2S_STANDARD_PCM_LONG (SPI_I2SCFGR_I2SSTD_0 | SPI_I2SCFGR_I2SSTD_1 | SPI_I2SCFGR_PCMSYNC) /*!< PCM standard, long frame synchronization */
+/**
+ * @}
+ */
+
+/** @defgroup I2S_LL_EC_MODE Operation Mode
+ * @{
+ */
+#define LL_I2S_MODE_SLAVE_TX 0x00000000U /*!< Slave Tx configuration */
+#define LL_I2S_MODE_SLAVE_RX (SPI_I2SCFGR_I2SCFG_0) /*!< Slave Rx configuration */
+#define LL_I2S_MODE_MASTER_TX (SPI_I2SCFGR_I2SCFG_1) /*!< Master Tx configuration */
+#define LL_I2S_MODE_MASTER_RX (SPI_I2SCFGR_I2SCFG_0 | SPI_I2SCFGR_I2SCFG_1) /*!< Master Rx configuration */
+/**
+ * @}
+ */
+
+/** @defgroup I2S_LL_EC_PRESCALER_FACTOR Prescaler Factor
+ * @{
+ */
+#define LL_I2S_PRESCALER_PARITY_EVEN 0x00000000U /*!< Odd factor: Real divider value is = I2SDIV * 2 */
+#define LL_I2S_PRESCALER_PARITY_ODD (SPI_I2SPR_ODD >> 8U) /*!< Odd factor: Real divider value is = (I2SDIV * 2)+1 */
+/**
+ * @}
+ */
+
+#if defined(USE_FULL_LL_DRIVER)
+
+/** @defgroup I2S_LL_EC_MCLK_OUTPUT MCLK Output
+ * @{
+ */
+#define LL_I2S_MCLK_OUTPUT_DISABLE 0x00000000U /*!< Master clock output is disabled */
+#define LL_I2S_MCLK_OUTPUT_ENABLE (SPI_I2SPR_MCKOE) /*!< Master clock output is enabled */
+/**
+ * @}
+ */
+
+/** @defgroup I2S_LL_EC_AUDIO_FREQ Audio Frequency
+ * @{
+ */
+
+#define LL_I2S_AUDIOFREQ_192K 192000U /*!< Audio Frequency configuration 192000 Hz */
+#define LL_I2S_AUDIOFREQ_96K 96000U /*!< Audio Frequency configuration 96000 Hz */
+#define LL_I2S_AUDIOFREQ_48K 48000U /*!< Audio Frequency configuration 48000 Hz */
+#define LL_I2S_AUDIOFREQ_44K 44100U /*!< Audio Frequency configuration 44100 Hz */
+#define LL_I2S_AUDIOFREQ_32K 32000U /*!< Audio Frequency configuration 32000 Hz */
+#define LL_I2S_AUDIOFREQ_22K 22050U /*!< Audio Frequency configuration 22050 Hz */
+#define LL_I2S_AUDIOFREQ_16K 16000U /*!< Audio Frequency configuration 16000 Hz */
+#define LL_I2S_AUDIOFREQ_11K 11025U /*!< Audio Frequency configuration 11025 Hz */
+#define LL_I2S_AUDIOFREQ_8K 8000U /*!< Audio Frequency configuration 8000 Hz */
+#define LL_I2S_AUDIOFREQ_DEFAULT 2U /*!< Audio Freq not specified. Register I2SDIV = 2 */
+/**
+ * @}
+ */
+#endif /* USE_FULL_LL_DRIVER */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup I2S_LL_Exported_Macros I2S Exported Macros
+ * @{
+ */
+
+/** @defgroup I2S_LL_EM_WRITE_READ Common Write and read registers Macros
+ * @{
+ */
+
+/**
+ * @brief Write a value in I2S register
+ * @param __INSTANCE__ I2S Instance
+ * @param __REG__ Register to be written
+ * @param __VALUE__ Value to be written in the register
+ * @retval None
+ */
+#define LL_I2S_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__))
+
+/**
+ * @brief Read a value in I2S register
+ * @param __INSTANCE__ I2S Instance
+ * @param __REG__ Register to be read
+ * @retval Register value
+ */
+#define LL_I2S_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup I2S_LL_Exported_Functions I2S Exported Functions
+ * @{
+ */
+
+/** @defgroup I2S_LL_EF_Configuration Configuration
+ * @{
+ */
+
+/**
+ * @brief Select I2S mode and Enable I2S peripheral
+ * @rmtoll I2SCFGR I2SMOD LL_I2S_Enable\n
+ * I2SCFGR I2SE LL_I2S_Enable
+ * @param SPIx SPI Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2S_Enable(SPI_TypeDef *SPIx)
+{
+ SET_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_I2SMOD | SPI_I2SCFGR_I2SE);
+}
+
+/**
+ * @brief Disable I2S peripheral
+ * @rmtoll I2SCFGR I2SE LL_I2S_Disable
+ * @param SPIx SPI Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2S_Disable(SPI_TypeDef *SPIx)
+{
+ CLEAR_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_I2SMOD | SPI_I2SCFGR_I2SE);
+}
+
+/**
+ * @brief Check if I2S peripheral is enabled
+ * @rmtoll I2SCFGR I2SE LL_I2S_IsEnabled
+ * @param SPIx SPI Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_I2S_IsEnabled(SPI_TypeDef *SPIx)
+{
+ return ((READ_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_I2SE) == (SPI_I2SCFGR_I2SE)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Set I2S data frame length
+ * @rmtoll I2SCFGR DATLEN LL_I2S_SetDataFormat\n
+ * I2SCFGR CHLEN LL_I2S_SetDataFormat
+ * @param SPIx SPI Instance
+ * @param DataFormat This parameter can be one of the following values:
+ * @arg @ref LL_I2S_DATAFORMAT_16B
+ * @arg @ref LL_I2S_DATAFORMAT_16B_EXTENDED
+ * @arg @ref LL_I2S_DATAFORMAT_24B
+ * @arg @ref LL_I2S_DATAFORMAT_32B
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2S_SetDataFormat(SPI_TypeDef *SPIx, uint32_t DataFormat)
+{
+ MODIFY_REG(SPIx->I2SCFGR, SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN, DataFormat);
+}
+
+/**
+ * @brief Get I2S data frame length
+ * @rmtoll I2SCFGR DATLEN LL_I2S_GetDataFormat\n
+ * I2SCFGR CHLEN LL_I2S_GetDataFormat
+ * @param SPIx SPI Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_I2S_DATAFORMAT_16B
+ * @arg @ref LL_I2S_DATAFORMAT_16B_EXTENDED
+ * @arg @ref LL_I2S_DATAFORMAT_24B
+ * @arg @ref LL_I2S_DATAFORMAT_32B
+ */
+__STATIC_INLINE uint32_t LL_I2S_GetDataFormat(SPI_TypeDef *SPIx)
+{
+ return (uint32_t)(READ_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN));
+}
+
+/**
+ * @brief Set I2S clock polarity
+ * @rmtoll I2SCFGR CKPOL LL_I2S_SetClockPolarity
+ * @param SPIx SPI Instance
+ * @param ClockPolarity This parameter can be one of the following values:
+ * @arg @ref LL_I2S_POLARITY_LOW
+ * @arg @ref LL_I2S_POLARITY_HIGH
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2S_SetClockPolarity(SPI_TypeDef *SPIx, uint32_t ClockPolarity)
+{
+ SET_BIT(SPIx->I2SCFGR, ClockPolarity);
+}
+
+/**
+ * @brief Get I2S clock polarity
+ * @rmtoll I2SCFGR CKPOL LL_I2S_GetClockPolarity
+ * @param SPIx SPI Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_I2S_POLARITY_LOW
+ * @arg @ref LL_I2S_POLARITY_HIGH
+ */
+__STATIC_INLINE uint32_t LL_I2S_GetClockPolarity(SPI_TypeDef *SPIx)
+{
+ return (uint32_t)(READ_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_CKPOL));
+}
+
+/**
+ * @brief Set I2S standard protocol
+ * @rmtoll I2SCFGR I2SSTD LL_I2S_SetStandard\n
+ * I2SCFGR PCMSYNC LL_I2S_SetStandard
+ * @param SPIx SPI Instance
+ * @param Standard This parameter can be one of the following values:
+ * @arg @ref LL_I2S_STANDARD_PHILIPS
+ * @arg @ref LL_I2S_STANDARD_MSB
+ * @arg @ref LL_I2S_STANDARD_LSB
+ * @arg @ref LL_I2S_STANDARD_PCM_SHORT
+ * @arg @ref LL_I2S_STANDARD_PCM_LONG
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2S_SetStandard(SPI_TypeDef *SPIx, uint32_t Standard)
+{
+ MODIFY_REG(SPIx->I2SCFGR, SPI_I2SCFGR_I2SSTD | SPI_I2SCFGR_PCMSYNC, Standard);
+}
+
+/**
+ * @brief Get I2S standard protocol
+ * @rmtoll I2SCFGR I2SSTD LL_I2S_GetStandard\n
+ * I2SCFGR PCMSYNC LL_I2S_GetStandard
+ * @param SPIx SPI Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_I2S_STANDARD_PHILIPS
+ * @arg @ref LL_I2S_STANDARD_MSB
+ * @arg @ref LL_I2S_STANDARD_LSB
+ * @arg @ref LL_I2S_STANDARD_PCM_SHORT
+ * @arg @ref LL_I2S_STANDARD_PCM_LONG
+ */
+__STATIC_INLINE uint32_t LL_I2S_GetStandard(SPI_TypeDef *SPIx)
+{
+ return (uint32_t)(READ_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_I2SSTD | SPI_I2SCFGR_PCMSYNC));
+}
+
+/**
+ * @brief Set I2S transfer mode
+ * @rmtoll I2SCFGR I2SCFG LL_I2S_SetTransferMode
+ * @param SPIx SPI Instance
+ * @param Mode This parameter can be one of the following values:
+ * @arg @ref LL_I2S_MODE_SLAVE_TX
+ * @arg @ref LL_I2S_MODE_SLAVE_RX
+ * @arg @ref LL_I2S_MODE_MASTER_TX
+ * @arg @ref LL_I2S_MODE_MASTER_RX
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2S_SetTransferMode(SPI_TypeDef *SPIx, uint32_t Mode)
+{
+ MODIFY_REG(SPIx->I2SCFGR, SPI_I2SCFGR_I2SCFG, Mode);
+}
+
+/**
+ * @brief Get I2S transfer mode
+ * @rmtoll I2SCFGR I2SCFG LL_I2S_GetTransferMode
+ * @param SPIx SPI Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_I2S_MODE_SLAVE_TX
+ * @arg @ref LL_I2S_MODE_SLAVE_RX
+ * @arg @ref LL_I2S_MODE_MASTER_TX
+ * @arg @ref LL_I2S_MODE_MASTER_RX
+ */
+__STATIC_INLINE uint32_t LL_I2S_GetTransferMode(SPI_TypeDef *SPIx)
+{
+ return (uint32_t)(READ_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_I2SCFG));
+}
+
+/**
+ * @brief Set I2S linear prescaler
+ * @rmtoll I2SPR I2SDIV LL_I2S_SetPrescalerLinear
+ * @param SPIx SPI Instance
+ * @param PrescalerLinear Value between Min_Data=0x02 and Max_Data=0xFF
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2S_SetPrescalerLinear(SPI_TypeDef *SPIx, uint8_t PrescalerLinear)
+{
+ MODIFY_REG(SPIx->I2SPR, SPI_I2SPR_I2SDIV, PrescalerLinear);
+}
+
+/**
+ * @brief Get I2S linear prescaler
+ * @rmtoll I2SPR I2SDIV LL_I2S_GetPrescalerLinear
+ * @param SPIx SPI Instance
+ * @retval PrescalerLinear Value between Min_Data=0x02 and Max_Data=0xFF
+ */
+__STATIC_INLINE uint32_t LL_I2S_GetPrescalerLinear(SPI_TypeDef *SPIx)
+{
+ return (uint32_t)(READ_BIT(SPIx->I2SPR, SPI_I2SPR_I2SDIV));
+}
+
+/**
+ * @brief Set I2S parity prescaler
+ * @rmtoll I2SPR ODD LL_I2S_SetPrescalerParity
+ * @param SPIx SPI Instance
+ * @param PrescalerParity This parameter can be one of the following values:
+ * @arg @ref LL_I2S_PRESCALER_PARITY_EVEN
+ * @arg @ref LL_I2S_PRESCALER_PARITY_ODD
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2S_SetPrescalerParity(SPI_TypeDef *SPIx, uint32_t PrescalerParity)
+{
+ MODIFY_REG(SPIx->I2SPR, SPI_I2SPR_ODD, PrescalerParity << 8U);
+}
+
+/**
+ * @brief Get I2S parity prescaler
+ * @rmtoll I2SPR ODD LL_I2S_GetPrescalerParity
+ * @param SPIx SPI Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_I2S_PRESCALER_PARITY_EVEN
+ * @arg @ref LL_I2S_PRESCALER_PARITY_ODD
+ */
+__STATIC_INLINE uint32_t LL_I2S_GetPrescalerParity(SPI_TypeDef *SPIx)
+{
+ return (uint32_t)(READ_BIT(SPIx->I2SPR, SPI_I2SPR_ODD) >> 8U);
+}
+
+/**
+ * @brief Enable the master clock ouput (Pin MCK)
+ * @rmtoll I2SPR MCKOE LL_I2S_EnableMasterClock
+ * @param SPIx SPI Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2S_EnableMasterClock(SPI_TypeDef *SPIx)
+{
+ SET_BIT(SPIx->I2SPR, SPI_I2SPR_MCKOE);
+}
+
+/**
+ * @brief Disable the master clock ouput (Pin MCK)
+ * @rmtoll I2SPR MCKOE LL_I2S_DisableMasterClock
+ * @param SPIx SPI Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2S_DisableMasterClock(SPI_TypeDef *SPIx)
+{
+ CLEAR_BIT(SPIx->I2SPR, SPI_I2SPR_MCKOE);
+}
+
+/**
+ * @brief Check if the master clock ouput (Pin MCK) is enabled
+ * @rmtoll I2SPR MCKOE LL_I2S_IsEnabledMasterClock
+ * @param SPIx SPI Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_I2S_IsEnabledMasterClock(SPI_TypeDef *SPIx)
+{
+ return ((READ_BIT(SPIx->I2SPR, SPI_I2SPR_MCKOE) == (SPI_I2SPR_MCKOE)) ? 1UL : 0UL);
+}
+
+#if defined(SPI_I2SCFGR_ASTRTEN)
+/**
+ * @brief Enable asynchronous start
+ * @rmtoll I2SCFGR ASTRTEN LL_I2S_EnableAsyncStart
+ * @param SPIx SPI Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2S_EnableAsyncStart(SPI_TypeDef *SPIx)
+{
+ SET_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_ASTRTEN);
+}
+
+/**
+ * @brief Disable asynchronous start
+ * @rmtoll I2SCFGR ASTRTEN LL_I2S_DisableAsyncStart
+ * @param SPIx SPI Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2S_DisableAsyncStart(SPI_TypeDef *SPIx)
+{
+ CLEAR_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_ASTRTEN);
+}
+
+/**
+ * @brief Check if asynchronous start is enabled
+ * @rmtoll I2SCFGR ASTRTEN LL_I2S_IsEnabledAsyncStart
+ * @param SPIx SPI Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_I2S_IsEnabledAsyncStart(SPI_TypeDef *SPIx)
+{
+ return ((READ_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_ASTRTEN) == (SPI_I2SCFGR_ASTRTEN)) ? 1UL : 0UL);
+}
+#endif /* SPI_I2SCFGR_ASTRTEN */
+
+/**
+ * @}
+ */
+
+/** @defgroup I2S_LL_EF_FLAG FLAG Management
+ * @{
+ */
+
+/**
+ * @brief Check if Rx buffer is not empty
+ * @rmtoll SR RXNE LL_I2S_IsActiveFlag_RXNE
+ * @param SPIx SPI Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_I2S_IsActiveFlag_RXNE(SPI_TypeDef *SPIx)
+{
+ return LL_SPI_IsActiveFlag_RXNE(SPIx);
+}
+
+/**
+ * @brief Check if Tx buffer is empty
+ * @rmtoll SR TXE LL_I2S_IsActiveFlag_TXE
+ * @param SPIx SPI Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_I2S_IsActiveFlag_TXE(SPI_TypeDef *SPIx)
+{
+ return LL_SPI_IsActiveFlag_TXE(SPIx);
+}
+
+/**
+ * @brief Get busy flag
+ * @rmtoll SR BSY LL_I2S_IsActiveFlag_BSY
+ * @param SPIx SPI Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_I2S_IsActiveFlag_BSY(SPI_TypeDef *SPIx)
+{
+ return LL_SPI_IsActiveFlag_BSY(SPIx);
+}
+
+/**
+ * @brief Get overrun error flag
+ * @rmtoll SR OVR LL_I2S_IsActiveFlag_OVR
+ * @param SPIx SPI Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_I2S_IsActiveFlag_OVR(SPI_TypeDef *SPIx)
+{
+ return LL_SPI_IsActiveFlag_OVR(SPIx);
+}
+
+/**
+ * @brief Get underrun error flag
+ * @rmtoll SR UDR LL_I2S_IsActiveFlag_UDR
+ * @param SPIx SPI Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_I2S_IsActiveFlag_UDR(SPI_TypeDef *SPIx)
+{
+ return ((READ_BIT(SPIx->SR, SPI_SR_UDR) == (SPI_SR_UDR)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Get frame format error flag
+ * @rmtoll SR FRE LL_I2S_IsActiveFlag_FRE
+ * @param SPIx SPI Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_I2S_IsActiveFlag_FRE(SPI_TypeDef *SPIx)
+{
+ return LL_SPI_IsActiveFlag_FRE(SPIx);
+}
+
+/**
+ * @brief Get channel side flag.
+ * @note 0: Channel Left has to be transmitted or has been received\n
+ * 1: Channel Right has to be transmitted or has been received\n
+ * It has no significance in PCM mode.
+ * @rmtoll SR CHSIDE LL_I2S_IsActiveFlag_CHSIDE
+ * @param SPIx SPI Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_I2S_IsActiveFlag_CHSIDE(SPI_TypeDef *SPIx)
+{
+ return ((READ_BIT(SPIx->SR, SPI_SR_CHSIDE) == (SPI_SR_CHSIDE)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Clear overrun error flag
+ * @rmtoll SR OVR LL_I2S_ClearFlag_OVR
+ * @param SPIx SPI Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2S_ClearFlag_OVR(SPI_TypeDef *SPIx)
+{
+ LL_SPI_ClearFlag_OVR(SPIx);
+}
+
+/**
+ * @brief Clear underrun error flag
+ * @rmtoll SR UDR LL_I2S_ClearFlag_UDR
+ * @param SPIx SPI Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2S_ClearFlag_UDR(SPI_TypeDef *SPIx)
+{
+ __IO uint32_t tmpreg;
+ tmpreg = SPIx->SR;
+ (void)tmpreg;
+}
+
+/**
+ * @brief Clear frame format error flag
+ * @rmtoll SR FRE LL_I2S_ClearFlag_FRE
+ * @param SPIx SPI Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2S_ClearFlag_FRE(SPI_TypeDef *SPIx)
+{
+ LL_SPI_ClearFlag_FRE(SPIx);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup I2S_LL_EF_IT Interrupt Management
+ * @{
+ */
+
+/**
+ * @brief Enable error IT
+ * @note This bit controls the generation of an interrupt when an error condition occurs (OVR, UDR and FRE in I2S mode).
+ * @rmtoll CR2 ERRIE LL_I2S_EnableIT_ERR
+ * @param SPIx SPI Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2S_EnableIT_ERR(SPI_TypeDef *SPIx)
+{
+ LL_SPI_EnableIT_ERR(SPIx);
+}
+
+/**
+ * @brief Enable Rx buffer not empty IT
+ * @rmtoll CR2 RXNEIE LL_I2S_EnableIT_RXNE
+ * @param SPIx SPI Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2S_EnableIT_RXNE(SPI_TypeDef *SPIx)
+{
+ LL_SPI_EnableIT_RXNE(SPIx);
+}
+
+/**
+ * @brief Enable Tx buffer empty IT
+ * @rmtoll CR2 TXEIE LL_I2S_EnableIT_TXE
+ * @param SPIx SPI Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2S_EnableIT_TXE(SPI_TypeDef *SPIx)
+{
+ LL_SPI_EnableIT_TXE(SPIx);
+}
+
+/**
+ * @brief Disable error IT
+ * @note This bit controls the generation of an interrupt when an error condition occurs (OVR, UDR and FRE in I2S mode).
+ * @rmtoll CR2 ERRIE LL_I2S_DisableIT_ERR
+ * @param SPIx SPI Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2S_DisableIT_ERR(SPI_TypeDef *SPIx)
+{
+ LL_SPI_DisableIT_ERR(SPIx);
+}
+
+/**
+ * @brief Disable Rx buffer not empty IT
+ * @rmtoll CR2 RXNEIE LL_I2S_DisableIT_RXNE
+ * @param SPIx SPI Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2S_DisableIT_RXNE(SPI_TypeDef *SPIx)
+{
+ LL_SPI_DisableIT_RXNE(SPIx);
+}
+
+/**
+ * @brief Disable Tx buffer empty IT
+ * @rmtoll CR2 TXEIE LL_I2S_DisableIT_TXE
+ * @param SPIx SPI Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2S_DisableIT_TXE(SPI_TypeDef *SPIx)
+{
+ LL_SPI_DisableIT_TXE(SPIx);
+}
+
+/**
+ * @brief Check if ERR IT is enabled
+ * @rmtoll CR2 ERRIE LL_I2S_IsEnabledIT_ERR
+ * @param SPIx SPI Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_I2S_IsEnabledIT_ERR(SPI_TypeDef *SPIx)
+{
+ return LL_SPI_IsEnabledIT_ERR(SPIx);
+}
+
+/**
+ * @brief Check if RXNE IT is enabled
+ * @rmtoll CR2 RXNEIE LL_I2S_IsEnabledIT_RXNE
+ * @param SPIx SPI Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_I2S_IsEnabledIT_RXNE(SPI_TypeDef *SPIx)
+{
+ return LL_SPI_IsEnabledIT_RXNE(SPIx);
+}
+
+/**
+ * @brief Check if TXE IT is enabled
+ * @rmtoll CR2 TXEIE LL_I2S_IsEnabledIT_TXE
+ * @param SPIx SPI Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_I2S_IsEnabledIT_TXE(SPI_TypeDef *SPIx)
+{
+ return LL_SPI_IsEnabledIT_TXE(SPIx);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup I2S_LL_EF_DMA DMA Management
+ * @{
+ */
+
+/**
+ * @brief Enable DMA Rx
+ * @rmtoll CR2 RXDMAEN LL_I2S_EnableDMAReq_RX
+ * @param SPIx SPI Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2S_EnableDMAReq_RX(SPI_TypeDef *SPIx)
+{
+ LL_SPI_EnableDMAReq_RX(SPIx);
+}
+
+/**
+ * @brief Disable DMA Rx
+ * @rmtoll CR2 RXDMAEN LL_I2S_DisableDMAReq_RX
+ * @param SPIx SPI Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2S_DisableDMAReq_RX(SPI_TypeDef *SPIx)
+{
+ LL_SPI_DisableDMAReq_RX(SPIx);
+}
+
+/**
+ * @brief Check if DMA Rx is enabled
+ * @rmtoll CR2 RXDMAEN LL_I2S_IsEnabledDMAReq_RX
+ * @param SPIx SPI Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_I2S_IsEnabledDMAReq_RX(SPI_TypeDef *SPIx)
+{
+ return LL_SPI_IsEnabledDMAReq_RX(SPIx);
+}
+
+/**
+ * @brief Enable DMA Tx
+ * @rmtoll CR2 TXDMAEN LL_I2S_EnableDMAReq_TX
+ * @param SPIx SPI Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2S_EnableDMAReq_TX(SPI_TypeDef *SPIx)
+{
+ LL_SPI_EnableDMAReq_TX(SPIx);
+}
+
+/**
+ * @brief Disable DMA Tx
+ * @rmtoll CR2 TXDMAEN LL_I2S_DisableDMAReq_TX
+ * @param SPIx SPI Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2S_DisableDMAReq_TX(SPI_TypeDef *SPIx)
+{
+ LL_SPI_DisableDMAReq_TX(SPIx);
+}
+
+/**
+ * @brief Check if DMA Tx is enabled
+ * @rmtoll CR2 TXDMAEN LL_I2S_IsEnabledDMAReq_TX
+ * @param SPIx SPI Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_I2S_IsEnabledDMAReq_TX(SPI_TypeDef *SPIx)
+{
+ return LL_SPI_IsEnabledDMAReq_TX(SPIx);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup I2S_LL_EF_DATA DATA Management
+ * @{
+ */
+
+/**
+ * @brief Read 16-Bits in data register
+ * @rmtoll DR DR LL_I2S_ReceiveData16
+ * @param SPIx SPI Instance
+ * @retval RxData Value between Min_Data=0x0000 and Max_Data=0xFFFF
+ */
+__STATIC_INLINE uint16_t LL_I2S_ReceiveData16(SPI_TypeDef *SPIx)
+{
+ return LL_SPI_ReceiveData16(SPIx);
+}
+
+/**
+ * @brief Write 16-Bits in data register
+ * @rmtoll DR DR LL_I2S_TransmitData16
+ * @param SPIx SPI Instance
+ * @param TxData Value between Min_Data=0x0000 and Max_Data=0xFFFF
+ * @retval None
+ */
+__STATIC_INLINE void LL_I2S_TransmitData16(SPI_TypeDef *SPIx, uint16_t TxData)
+{
+ LL_SPI_TransmitData16(SPIx, TxData);
+}
+
+/**
+ * @}
+ */
+
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup I2S_LL_EF_Init Initialization and de-initialization functions
+ * @{
+ */
+
+ErrorStatus LL_I2S_DeInit(SPI_TypeDef *SPIx);
+ErrorStatus LL_I2S_Init(SPI_TypeDef *SPIx, LL_I2S_InitTypeDef *I2S_InitStruct);
+void LL_I2S_StructInit(LL_I2S_InitTypeDef *I2S_InitStruct);
+void LL_I2S_ConfigPrescaler(SPI_TypeDef *SPIx, uint32_t PrescalerLinear, uint32_t PrescalerParity);
+
+/**
+ * @}
+ */
+#endif /* USE_FULL_LL_DRIVER */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* SPI_I2S_SUPPORT */
+
+#endif /* defined (SPI1) || defined (SPI2) */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32F0xx_LL_SPI_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_system.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_system.h
new file mode 100644
index 0000000..78d4107
--- /dev/null
+++ b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_system.h
@@ -0,0 +1,1852 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_ll_system.h
+ * @author MCD Application Team
+ * @brief Header file of SYSTEM LL module.
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ The LL SYSTEM driver contains a set of generic APIs that can be
+ used by user:
+ (+) Some of the FLASH features need to be handled in the SYSTEM file.
+ (+) Access to DBGCMU registers
+ (+) Access to SYSCFG registers
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_LL_SYSTEM_H
+#define __STM32F0xx_LL_SYSTEM_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx.h"
+
+/** @addtogroup STM32F0xx_LL_Driver
+ * @{
+ */
+
+#if defined (FLASH) || defined (SYSCFG) || defined (DBGMCU)
+
+/** @defgroup SYSTEM_LL SYSTEM
+ * @{
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup SYSTEM_LL_Private_Constants SYSTEM Private Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup SYSTEM_LL_Exported_Constants SYSTEM Exported Constants
+ * @{
+ */
+
+/** @defgroup SYSTEM_LL_EC_REMAP SYSCFG Remap
+* @{
+*/
+#define LL_SYSCFG_REMAP_FLASH (uint32_t)0x00000000U /*!< Main Flash memory mapped at 0x00000000 */
+#define LL_SYSCFG_REMAP_SYSTEMFLASH SYSCFG_CFGR1_MEM_MODE_0 /*!< System Flash memory mapped at 0x00000000 */
+#define LL_SYSCFG_REMAP_SRAM (SYSCFG_CFGR1_MEM_MODE_1 | SYSCFG_CFGR1_MEM_MODE_0) /*!< Embedded SRAM mapped at 0x00000000 */
+/**
+ * @}
+ */
+
+#if defined(SYSCFG_CFGR1_IR_MOD)
+/** @defgroup SYSTEM_LL_EC_IR_MOD SYSCFG IR Modulation
+ * @{
+ */
+#define LL_SYSCFG_IR_MOD_TIM16 (SYSCFG_CFGR1_IR_MOD_0 & SYSCFG_CFGR1_IR_MOD_1) /*!< Timer16 is selected as IR Modulation enveloppe source */
+#define LL_SYSCFG_IR_MOD_USART1 (SYSCFG_CFGR1_IR_MOD_0) /*!< USART1 is selected as IR Modulation enveloppe source */
+#define LL_SYSCFG_IR_MOD_USART4 (SYSCFG_CFGR1_IR_MOD_1) /*!< USART4 is selected as IR Modulation enveloppe source */
+/**
+ * @}
+ */
+
+#endif /* SYSCFG_CFGR1_IR_MOD */
+
+#if defined(SYSCFG_CFGR1_USART1TX_DMA_RMP) || defined(SYSCFG_CFGR1_USART1RX_DMA_RMP) || defined(SYSCFG_CFGR1_USART2_DMA_RMP) || defined(SYSCFG_CFGR1_USART3_DMA_RMP)
+/** @defgroup SYSTEM_LL_EC_USART1TX_RMP SYSCFG USART DMA Remap
+ * @{
+ */
+#if defined (SYSCFG_CFGR1_USART1TX_DMA_RMP)
+#define LL_SYSCFG_USART1TX_RMP_DMA1CH2 ((SYSCFG_CFGR1_USART1TX_DMA_RMP >> 8U) | (uint32_t)0x00000000U) /*!< USART1_TX DMA request mapped on DMA channel 2U */
+#define LL_SYSCFG_USART1TX_RMP_DMA1CH4 ((SYSCFG_CFGR1_USART1TX_DMA_RMP >> 8U) | SYSCFG_CFGR1_USART1TX_DMA_RMP) /*!< USART1_TX DMA request mapped on DMA channel 4U */
+#endif /*SYSCFG_CFGR1_USART1TX_DMA_RMP*/
+#if defined (SYSCFG_CFGR1_USART1RX_DMA_RMP)
+#define LL_SYSCFG_USART1RX_RMP_DMA1CH3 ((SYSCFG_CFGR1_USART1RX_DMA_RMP >> 8U) | (uint32_t)0x00000000U) /*!< USART1_RX DMA request mapped on DMA channel 3U */
+#define LL_SYSCFG_USART1RX_RMP_DMA1CH5 ((SYSCFG_CFGR1_USART1RX_DMA_RMP >> 8U) | SYSCFG_CFGR1_USART1RX_DMA_RMP) /*!< USART1_RX DMA request mapped on DMA channel 5 */
+#endif /*SYSCFG_CFGR1_USART1RX_DMA_RMP*/
+#if defined (SYSCFG_CFGR1_USART2_DMA_RMP)
+#define LL_SYSCFG_USART2_RMP_DMA1CH54 ((SYSCFG_CFGR1_USART2_DMA_RMP >> 8U) | (uint32_t)0x00000000U) /*!< USART2_RX and USART2_TX DMA requests mapped on DMA channel 5 and 4U respectively */
+#define LL_SYSCFG_USART2_RMP_DMA1CH67 ((SYSCFG_CFGR1_USART2_DMA_RMP >> 8U) | SYSCFG_CFGR1_USART2_DMA_RMP) /*!< USART2_RX and USART2_TX DMA requests mapped on DMA channel 6 and 7 respectively */
+#endif /*SYSCFG_CFGR1_USART2_DMA_RMP*/
+#if defined (SYSCFG_CFGR1_USART3_DMA_RMP)
+#define LL_SYSCFG_USART3_RMP_DMA1CH67 ((SYSCFG_CFGR1_USART3_DMA_RMP >> 8U) | (uint32_t)0x00000000U) /*!< USART3_RX and USART3_TX DMA requests mapped on DMA channel 6 and 7 respectively */
+#define LL_SYSCFG_USART3_RMP_DMA1CH32 ((SYSCFG_CFGR1_USART3_DMA_RMP >> 8U) | SYSCFG_CFGR1_USART3_DMA_RMP) /*!< USART3_RX and USART3_TX DMA requests mapped on DMA channel 3U and 2U respectively */
+#endif /* SYSCFG_CFGR1_USART3_DMA_RMP */
+/**
+ * @}
+ */
+#endif /* SYSCFG_CFGR1_USART1TX_DMA_RMP || SYSCFG_CFGR1_USART1RX_DMA_RMP || SYSCFG_CFGR1_USART2_DMA_RMP || SYSCFG_CFGR1_USART3_DMA_RMP */
+
+#if defined (SYSCFG_CFGR1_SPI2_DMA_RMP)
+/** @defgroup SYSTEM_LL_EC_SPI2_RMP_DMA1 SYSCFG SPI2 DMA Remap
+ * @{
+ */
+#define LL_SYSCFG_SPI2_RMP_DMA1_CH45 (uint32_t)0x00000000U /*!< SPI2_RX and SPI2_TX DMA requests mapped on DMA channel 4U and 5 respectively */
+#define LL_SYSCFG_SPI2_RMP_DMA1_CH67 SYSCFG_CFGR1_SPI2_DMA_RMP /*!< SPI2_RX and SPI2_TX DMA requests mapped on DMA channel 6 and 7 respectively */
+/**
+ * @}
+ */
+
+#endif /*SYSCFG_CFGR1_SPI2_DMA_RMP*/
+
+#if defined (SYSCFG_CFGR1_I2C1_DMA_RMP)
+/** @defgroup SYSTEM_LL_EC_I2C1_RMP_DMA1 SYSCFG I2C1 DMA Remap
+ * @{
+ */
+#define LL_SYSCFG_I2C1_RMP_DMA1_CH32 (uint32_t)0x00000000U /*!< I2C1_RX and I2C1_TX DMA requests mapped on DMA channel 3U and 2U respectively */
+#define LL_SYSCFG_I2C1_RMP_DMA1_CH76 SYSCFG_CFGR1_I2C1_DMA_RMP /*!< I2C1_RX and I2C1_TX DMA requests mapped on DMA channel 7 and 6 respectively */
+/**
+ * @}
+ */
+
+#endif /*SYSCFG_CFGR1_I2C1_DMA_RMP*/
+
+#if defined(SYSCFG_CFGR1_ADC_DMA_RMP)
+/** @defgroup SYSTEM_LL_EC_ADC1_RMP_DMA1 SYSCFG ADC1 DMA Remap
+ * @{
+ */
+#define LL_SYSCFG_ADC1_RMP_DMA1_CH1 (uint32_t)0x00000000U /*!< ADC DMA request mapped on DMA channel 1U */
+#define LL_SYSCFG_ADC1_RMP_DMA1_CH2 SYSCFG_CFGR1_ADC_DMA_RMP /*!< ADC DMA request mapped on DMA channel 2U */
+/**
+ * @}
+ */
+
+#endif /* SYSCFG_CFGR1_ADC_DMA_RMP */
+
+#if defined(SYSCFG_CFGR1_TIM16_DMA_RMP) || defined(SYSCFG_CFGR1_TIM17_DMA_RMP) || defined(SYSCFG_CFGR1_TIM1_DMA_RMP) || defined(SYSCFG_CFGR1_TIM2_DMA_RMP) || defined(SYSCFG_CFGR1_TIM3_DMA_RMP)
+/** @defgroup SYSTEM_LL_EC_TIM16_RMP_DMA1 SYSCFG TIM DMA Remap
+ * @{
+ */
+#if defined(SYSCFG_CFGR1_TIM16_DMA_RMP)
+#if defined (SYSCFG_CFGR1_TIM16_DMA_RMP2)
+#define LL_SYSCFG_TIM16_RMP_DMA1_CH3 (((SYSCFG_CFGR1_TIM16_DMA_RMP | SYSCFG_CFGR1_TIM16_DMA_RMP2) >> 8U) | (uint32_t)0x00000000U) /*!< TIM16_CH1 and TIM16_UP DMA requests mapped on DMA channel 3 */
+#define LL_SYSCFG_TIM16_RMP_DMA1_CH4 (((SYSCFG_CFGR1_TIM16_DMA_RMP | SYSCFG_CFGR1_TIM16_DMA_RMP2) >> 8U) | SYSCFG_CFGR1_TIM16_DMA_RMP) /*!< TIM16_CH1 and TIM16_UP DMA requests mapped on DMA channel 4 */
+#define LL_SYSCFG_TIM16_RMP_DMA1_CH6 ((SYSCFG_CFGR1_TIM16_DMA_RMP2 >> 8U) | SYSCFG_CFGR1_TIM16_DMA_RMP2) /*!< TIM16_CH1 and TIM16_UP DMA requests mapped on DMA channel 6 */
+#else
+#define LL_SYSCFG_TIM16_RMP_DMA1_CH3 ((SYSCFG_CFGR1_TIM16_DMA_RMP >> 8U) | (uint32_t)0x00000000U) /*!< TIM16_CH1 and TIM16_UP DMA requests mapped on DMA channel 3 */
+#define LL_SYSCFG_TIM16_RMP_DMA1_CH4 ((SYSCFG_CFGR1_TIM16_DMA_RMP >> 8U) | SYSCFG_CFGR1_TIM16_DMA_RMP) /*!< TIM16_CH1 and TIM16_UP DMA requests mapped on DMA channel 4 */
+#endif /* SYSCFG_CFGR1_TIM16_DMA_RMP2 */
+#endif /* SYSCFG_CFGR1_TIM16_DMA_RMP */
+#if defined(SYSCFG_CFGR1_TIM17_DMA_RMP)
+#if defined (SYSCFG_CFGR1_TIM17_DMA_RMP2)
+#define LL_SYSCFG_TIM17_RMP_DMA1_CH1 (((SYSCFG_CFGR1_TIM17_DMA_RMP | SYSCFG_CFGR1_TIM17_DMA_RMP2) >> 8U) | (uint32_t)0x00000000U) /*!< TIM17_CH1 and TIM17_UP DMA requests mapped on DMA channel 1 */
+#define LL_SYSCFG_TIM17_RMP_DMA1_CH2 (((SYSCFG_CFGR1_TIM17_DMA_RMP | SYSCFG_CFGR1_TIM17_DMA_RMP2) >> 8U) | SYSCFG_CFGR1_TIM17_DMA_RMP) /*!< TIM17_CH1 and TIM17_UP DMA requests mapped on DMA channel 2 */
+#define LL_SYSCFG_TIM17_RMP_DMA1_CH7 ((SYSCFG_CFGR1_TIM17_DMA_RMP2 >> 8U) | SYSCFG_CFGR1_TIM17_DMA_RMP2) /*!< TIM17_CH1 and TIM17_UP DMA requests mapped on DMA channel 7 */
+#else
+#define LL_SYSCFG_TIM17_RMP_DMA1_CH1 ((SYSCFG_CFGR1_TIM17_DMA_RMP >> 8U) | (uint32_t)0x00000000U) /*!< TIM17_CH1 and TIM17_UP DMA requests mapped on DMA channel 1 */
+#define LL_SYSCFG_TIM17_RMP_DMA1_CH2 ((SYSCFG_CFGR1_TIM17_DMA_RMP >> 8U) | SYSCFG_CFGR1_TIM17_DMA_RMP) /*!< TIM17_CH1 and TIM17_UP DMA requests mapped on DMA channel 2 */
+#endif /* SYSCFG_CFGR1_TIM17_DMA_RMP2 */
+#endif /* SYSCFG_CFGR1_TIM17_DMA_RMP */
+#if defined (SYSCFG_CFGR1_TIM1_DMA_RMP)
+#define LL_SYSCFG_TIM1_RMP_DMA1_CH234 ((SYSCFG_CFGR1_TIM1_DMA_RMP >> 8U) | (uint32_t)0x00000000U) /*!< TIM1_CH1, TIM1_CH2 and TIM1_CH3 DMA requests mapped on DMAchannel 2, 3 and 4 respectively */
+#define LL_SYSCFG_TIM1_RMP_DMA1_CH6 ((SYSCFG_CFGR1_TIM1_DMA_RMP >> 8U) | SYSCFG_CFGR1_TIM1_DMA_RMP) /*!< TIM1_CH1, TIM1_CH2 and TIM1_CH3 DMA requests mapped on DMA channel 6 */
+#endif /*SYSCFG_CFGR1_TIM1_DMA_RMP*/
+#if defined (SYSCFG_CFGR1_TIM2_DMA_RMP)
+#define LL_SYSCFG_TIM2_RMP_DMA1_CH34 ((SYSCFG_CFGR1_TIM2_DMA_RMP >> 8U) | (uint32_t)0x00000000U) /*!< TIM2_CH2 and TIM2_CH4 DMA requests mapped on DMA channel 3 and 4 respectively */
+#define LL_SYSCFG_TIM2_RMP_DMA1_CH7 ((SYSCFG_CFGR1_TIM2_DMA_RMP >> 8U) | SYSCFG_CFGR1_TIM2_DMA_RMP) /*!< TIM2_CH2 and TIM2_CH4 DMA requests mapped on DMA channel 7 */
+#endif /*SYSCFG_CFGR1_TIM2_DMA_RMP*/
+#if defined (SYSCFG_CFGR1_TIM3_DMA_RMP)
+#define LL_SYSCFG_TIM3_RMP_DMA1_CH4 ((SYSCFG_CFGR1_TIM3_DMA_RMP >> 8U) | (uint32_t)0x00000000U) /*!< TIM3_CH1 and TIM3_TRIG DMA requests mapped on DMA channel 4 */
+#define LL_SYSCFG_TIM3_RMP_DMA1_CH6 ((SYSCFG_CFGR1_TIM3_DMA_RMP >> 8U) | SYSCFG_CFGR1_TIM3_DMA_RMP) /*!< TIM3_CH1 and TIM3_TRIG DMA requests mapped on DMA channel 6 */
+#endif /*SYSCFG_CFGR1_TIM3_DMA_RMP*/
+/**
+ * @}
+ */
+
+#endif /* SYSCFG_CFGR1_TIM16_DMA_RMP || SYSCFG_CFGR1_TIM17_DMA_RMP || SYSCFG_CFGR1_TIM1_DMA_RMP || SYSCFG_CFGR1_TIM2_DMA_RMP || SYSCFG_CFGR1_TIM3_DMA_RMP */
+
+/** @defgroup SYSTEM_LL_EC_I2C_FASTMODEPLUS SYSCFG I2C FASTMODEPLUS
+ * @{
+ */
+#define LL_SYSCFG_I2C_FASTMODEPLUS_PB6 SYSCFG_CFGR1_I2C_FMP_PB6 /*!< I2C PB6 Fast mode plus */
+#define LL_SYSCFG_I2C_FASTMODEPLUS_PB7 SYSCFG_CFGR1_I2C_FMP_PB7 /*!< I2C PB7 Fast mode plus */
+#define LL_SYSCFG_I2C_FASTMODEPLUS_PB8 SYSCFG_CFGR1_I2C_FMP_PB8 /*!< I2C PB8 Fast mode plus */
+#define LL_SYSCFG_I2C_FASTMODEPLUS_PB9 SYSCFG_CFGR1_I2C_FMP_PB9 /*!< I2C PB9 Fast mode plus */
+#if defined(SYSCFG_CFGR1_I2C_FMP_I2C1)
+#define LL_SYSCFG_I2C_FASTMODEPLUS_I2C1 SYSCFG_CFGR1_I2C_FMP_I2C1 /*!< Enable Fast Mode Plus on PB10, PB11, PF6 and PF7 */
+#endif /*SYSCFG_CFGR1_I2C_FMP_I2C1*/
+#if defined(SYSCFG_CFGR1_I2C_FMP_I2C2)
+#define LL_SYSCFG_I2C_FASTMODEPLUS_I2C2 SYSCFG_CFGR1_I2C_FMP_I2C2 /*!< Enable I2C2 Fast mode plus */
+#endif /*SYSCFG_CFGR1_I2C_FMP_I2C2*/
+#if defined(SYSCFG_CFGR1_I2C_FMP_PA9)
+#define LL_SYSCFG_I2C_FASTMODEPLUS_PA9 SYSCFG_CFGR1_I2C_FMP_PA9 /*!< Enable Fast Mode Plus on PA9 */
+#endif /*SYSCFG_CFGR1_I2C_FMP_PA9*/
+#if defined(SYSCFG_CFGR1_I2C_FMP_PA10)
+#define LL_SYSCFG_I2C_FASTMODEPLUS_PA10 SYSCFG_CFGR1_I2C_FMP_PA10 /*!< Enable Fast Mode Plus on PA10 */
+#endif /*SYSCFG_CFGR1_I2C_FMP_PA10*/
+/**
+ * @}
+ */
+
+/** @defgroup SYSTEM_LL_EC_EXTI_PORT SYSCFG EXTI PORT
+ * @{
+ */
+#define LL_SYSCFG_EXTI_PORTA (uint32_t)0U /*!< EXTI PORT A */
+#define LL_SYSCFG_EXTI_PORTB (uint32_t)1U /*!< EXTI PORT B */
+#define LL_SYSCFG_EXTI_PORTC (uint32_t)2U /*!< EXTI PORT C */
+#if defined(GPIOD_BASE)
+#define LL_SYSCFG_EXTI_PORTD (uint32_t)3U /*!< EXTI PORT D */
+#endif /*GPIOD_BASE*/
+#if defined(GPIOE_BASE)
+#define LL_SYSCFG_EXTI_PORTE (uint32_t)4U /*!< EXTI PORT E */
+#endif /*GPIOE_BASE*/
+#define LL_SYSCFG_EXTI_PORTF (uint32_t)5U /*!< EXTI PORT F */
+/**
+ * @}
+ */
+
+/** @defgroup SYSTEM_LL_EC_EXTI_LINE SYSCFG EXTI LINE
+ * @{
+ */
+#define LL_SYSCFG_EXTI_LINE0 (uint32_t)(0U << 16U | 0U) /*!< EXTI_POSITION_0 | EXTICR[0] */
+#define LL_SYSCFG_EXTI_LINE1 (uint32_t)(4U << 16U | 0U) /*!< EXTI_POSITION_4 | EXTICR[0] */
+#define LL_SYSCFG_EXTI_LINE2 (uint32_t)(8U << 16U | 0U) /*!< EXTI_POSITION_8 | EXTICR[0] */
+#define LL_SYSCFG_EXTI_LINE3 (uint32_t)(12U << 16U | 0U) /*!< EXTI_POSITION_12 | EXTICR[0] */
+#define LL_SYSCFG_EXTI_LINE4 (uint32_t)(0U << 16U | 1U) /*!< EXTI_POSITION_0 | EXTICR[1] */
+#define LL_SYSCFG_EXTI_LINE5 (uint32_t)(4U << 16U | 1U) /*!< EXTI_POSITION_4 | EXTICR[1] */
+#define LL_SYSCFG_EXTI_LINE6 (uint32_t)(8U << 16U | 1U) /*!< EXTI_POSITION_8 | EXTICR[1] */
+#define LL_SYSCFG_EXTI_LINE7 (uint32_t)(12U << 16U | 1U) /*!< EXTI_POSITION_12 | EXTICR[1] */
+#define LL_SYSCFG_EXTI_LINE8 (uint32_t)(0U << 16U | 2U) /*!< EXTI_POSITION_0 | EXTICR[2] */
+#define LL_SYSCFG_EXTI_LINE9 (uint32_t)(4U << 16U | 2U) /*!< EXTI_POSITION_4 | EXTICR[2] */
+#define LL_SYSCFG_EXTI_LINE10 (uint32_t)(8U << 16U | 2U) /*!< EXTI_POSITION_8 | EXTICR[2] */
+#define LL_SYSCFG_EXTI_LINE11 (uint32_t)(12U << 16U | 2U) /*!< EXTI_POSITION_12 | EXTICR[2] */
+#define LL_SYSCFG_EXTI_LINE12 (uint32_t)(0U << 16U | 3U) /*!< EXTI_POSITION_0 | EXTICR[3] */
+#define LL_SYSCFG_EXTI_LINE13 (uint32_t)(4U << 16U | 3U) /*!< EXTI_POSITION_4 | EXTICR[3] */
+#define LL_SYSCFG_EXTI_LINE14 (uint32_t)(8U << 16U | 3U) /*!< EXTI_POSITION_8 | EXTICR[3] */
+#define LL_SYSCFG_EXTI_LINE15 (uint32_t)(12U << 16U | 3U) /*!< EXTI_POSITION_12 | EXTICR[3] */
+/**
+ * @}
+ */
+
+/** @defgroup SYSTEM_LL_EC_TIMBREAK SYSCFG TIMER BREAK
+ * @{
+ */
+#if defined(SYSCFG_CFGR2_PVD_LOCK)
+#define LL_SYSCFG_TIMBREAK_PVD SYSCFG_CFGR2_PVD_LOCK /*!< Enables and locks the PVD connection
+ with TIM1/15/16U/17 Break Input and also
+ the PVDE and PLS bits of the Power Control Interface */
+#endif /*SYSCFG_CFGR2_PVD_LOCK*/
+#define LL_SYSCFG_TIMBREAK_SRAM_PARITY SYSCFG_CFGR2_SRAM_PARITY_LOCK /*!< Enables and locks the SRAM_PARITY error signal
+ with Break Input of TIM1/15/16/17 */
+#define LL_SYSCFG_TIMBREAK_LOCKUP SYSCFG_CFGR2_LOCKUP_LOCK /*!< Enables and locks the LOCKUP (Hardfault) output of
+ CortexM0 with Break Input of TIM1/15/16/17 */
+/**
+ * @}
+ */
+
+/** @defgroup SYSTEM_LL_EC_APB1_GRP1_STOP_IP DBGMCU APB1 GRP1 STOP IP
+ * @{
+ */
+#if defined(DBGMCU_APB1_FZ_DBG_TIM2_STOP)
+#define LL_DBGMCU_APB1_GRP1_TIM2_STOP DBGMCU_APB1_FZ_DBG_TIM2_STOP /*!< TIM2 counter stopped when core is halted */
+#endif /*DBGMCU_APB1_FZ_DBG_TIM2_STOP*/
+#define LL_DBGMCU_APB1_GRP1_TIM3_STOP DBGMCU_APB1_FZ_DBG_TIM3_STOP /*!< TIM3 counter stopped when core is halted */
+#if defined(DBGMCU_APB1_FZ_DBG_TIM6_STOP)
+#define LL_DBGMCU_APB1_GRP1_TIM6_STOP DBGMCU_APB1_FZ_DBG_TIM6_STOP /*!< TIM6 counter stopped when core is halted */
+#endif /*DBGMCU_APB1_FZ_DBG_TIM6_STOP*/
+#if defined(DBGMCU_APB1_FZ_DBG_TIM7_STOP)
+#define LL_DBGMCU_APB1_GRP1_TIM7_STOP DBGMCU_APB1_FZ_DBG_TIM7_STOP /*!< TIM7 counter stopped when core is halted */
+#endif /*DBGMCU_APB1_FZ_DBG_TIM7_STOP*/
+#define LL_DBGMCU_APB1_GRP1_TIM14_STOP DBGMCU_APB1_FZ_DBG_TIM14_STOP /*!< TIM14 counter stopped when core is halted */
+#define LL_DBGMCU_APB1_GRP1_RTC_STOP DBGMCU_APB1_FZ_DBG_RTC_STOP /*!< RTC Calendar frozen when core is halted */
+#define LL_DBGMCU_APB1_GRP1_WWDG_STOP DBGMCU_APB1_FZ_DBG_WWDG_STOP /*!< Debug Window Watchdog stopped when Core is halted */
+#define LL_DBGMCU_APB1_GRP1_IWDG_STOP DBGMCU_APB1_FZ_DBG_IWDG_STOP /*!< Debug Independent Watchdog stopped when Core is halted */
+#define LL_DBGMCU_APB1_GRP1_I2C1_STOP DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT /*!< I2C1 SMBUS timeout mode stopped when Core is halted */
+#if defined(DBGMCU_APB1_FZ_DBG_CAN_STOP)
+#define LL_DBGMCU_APB1_GRP1_CAN_STOP DBGMCU_APB1_FZ_DBG_CAN_STOP /*!< CAN debug stopped when Core is halted */
+#endif /*DBGMCU_APB1_FZ_DBG_CAN_STOP*/
+/**
+ * @}
+ */
+
+/** @defgroup SYSTEM_LL_EC_APB1 GRP2_STOP_IP DBGMCU APB1 GRP2 STOP IP
+ * @{
+ */
+#define LL_DBGMCU_APB1_GRP2_TIM1_STOP DBGMCU_APB2_FZ_DBG_TIM1_STOP /*!< TIM1 counter stopped when core is halted */
+#if defined(DBGMCU_APB2_FZ_DBG_TIM15_STOP)
+#define LL_DBGMCU_APB1_GRP2_TIM15_STOP DBGMCU_APB2_FZ_DBG_TIM15_STOP /*!< TIM15 counter stopped when core is halted */
+#endif /*DBGMCU_APB2_FZ_DBG_TIM15_STOP*/
+#define LL_DBGMCU_APB1_GRP2_TIM16_STOP DBGMCU_APB2_FZ_DBG_TIM16_STOP /*!< TIM16 counter stopped when core is halted */
+#define LL_DBGMCU_APB1_GRP2_TIM17_STOP DBGMCU_APB2_FZ_DBG_TIM17_STOP /*!< TIM17 counter stopped when core is halted */
+/**
+ * @}
+ */
+
+/** @defgroup SYSTEM_LL_EC_LATENCY FLASH LATENCY
+ * @{
+ */
+#define LL_FLASH_LATENCY_0 0x00000000U /*!< FLASH Zero Latency cycle */
+#define LL_FLASH_LATENCY_1 FLASH_ACR_LATENCY /*!< FLASH One Latency cycle */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup SYSTEM_LL_Exported_Functions SYSTEM Exported Functions
+ * @{
+ */
+
+/** @defgroup SYSTEM_LL_EF_SYSCFG SYSCFG
+ * @{
+ */
+
+/**
+ * @brief Set memory mapping at address 0x00000000
+ * @rmtoll SYSCFG_CFGR1 MEM_MODE LL_SYSCFG_SetRemapMemory
+ * @param Memory This parameter can be one of the following values:
+ * @arg @ref LL_SYSCFG_REMAP_FLASH
+ * @arg @ref LL_SYSCFG_REMAP_SYSTEMFLASH
+ * @arg @ref LL_SYSCFG_REMAP_SRAM
+ * @retval None
+ */
+__STATIC_INLINE void LL_SYSCFG_SetRemapMemory(uint32_t Memory)
+{
+ MODIFY_REG(SYSCFG->CFGR1, SYSCFG_CFGR1_MEM_MODE, Memory);
+}
+
+/**
+ * @brief Get memory mapping at address 0x00000000
+ * @rmtoll SYSCFG_CFGR1 MEM_MODE LL_SYSCFG_GetRemapMemory
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_SYSCFG_REMAP_FLASH
+ * @arg @ref LL_SYSCFG_REMAP_SYSTEMFLASH
+ * @arg @ref LL_SYSCFG_REMAP_SRAM
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_GetRemapMemory(void)
+{
+ return (uint32_t)(READ_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_MEM_MODE));
+}
+
+#if defined(SYSCFG_CFGR1_IR_MOD)
+/**
+ * @brief Set IR Modulation Envelope signal source.
+ * @rmtoll SYSCFG_CFGR1 IR_MOD LL_SYSCFG_SetIRModEnvelopeSignal
+ * @param Source This parameter can be one of the following values:
+ * @arg @ref LL_SYSCFG_IR_MOD_TIM16
+ * @arg @ref LL_SYSCFG_IR_MOD_USART1
+ * @arg @ref LL_SYSCFG_IR_MOD_USART4
+ * @retval None
+ */
+__STATIC_INLINE void LL_SYSCFG_SetIRModEnvelopeSignal(uint32_t Source)
+{
+ MODIFY_REG(SYSCFG->CFGR1, SYSCFG_CFGR1_IR_MOD, Source);
+}
+
+/**
+ * @brief Get IR Modulation Envelope signal source.
+ * @rmtoll SYSCFG_CFGR1 IR_MOD LL_SYSCFG_GetIRModEnvelopeSignal
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_SYSCFG_IR_MOD_TIM16
+ * @arg @ref LL_SYSCFG_IR_MOD_USART1
+ * @arg @ref LL_SYSCFG_IR_MOD_USART4
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_GetIRModEnvelopeSignal(void)
+{
+ return (uint32_t)(READ_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_IR_MOD));
+}
+#endif /* SYSCFG_CFGR1_IR_MOD */
+
+#if defined(SYSCFG_CFGR1_USART1TX_DMA_RMP) || defined(SYSCFG_CFGR1_USART1RX_DMA_RMP) || defined(SYSCFG_CFGR1_USART2_DMA_RMP) || defined(SYSCFG_CFGR1_USART3_DMA_RMP)
+/**
+ * @brief Set DMA request remapping bits for USART
+ * @rmtoll SYSCFG_CFGR1 USART1TX_DMA_RMP LL_SYSCFG_SetRemapDMA_USART\n
+ * SYSCFG_CFGR1 USART1RX_DMA_RMP LL_SYSCFG_SetRemapDMA_USART\n
+ * SYSCFG_CFGR1 USART2_DMA_RMP LL_SYSCFG_SetRemapDMA_USART\n
+ * SYSCFG_CFGR1 USART3_DMA_RMP LL_SYSCFG_SetRemapDMA_USART
+ * @param Remap This parameter can be one of the following values:
+ * @arg @ref LL_SYSCFG_USART1TX_RMP_DMA1CH2 (*)
+ * @arg @ref LL_SYSCFG_USART1TX_RMP_DMA1CH4 (*)
+ * @arg @ref LL_SYSCFG_USART1RX_RMP_DMA1CH3 (*)
+ * @arg @ref LL_SYSCFG_USART1RX_RMP_DMA1CH5 (*)
+ * @arg @ref LL_SYSCFG_USART2_RMP_DMA1CH54 (*)
+ * @arg @ref LL_SYSCFG_USART2_RMP_DMA1CH67 (*)
+ * @arg @ref LL_SYSCFG_USART3_RMP_DMA1CH67 (*)
+ * @arg @ref LL_SYSCFG_USART3_RMP_DMA1CH32 (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+ */
+__STATIC_INLINE void LL_SYSCFG_SetRemapDMA_USART(uint32_t Remap)
+{
+ MODIFY_REG(SYSCFG->CFGR1, (Remap & 0x00FF00FFU) << 8U, (Remap & 0xFF00FF00U));
+}
+#endif /* SYSCFG_CFGR1_USART1TX_DMA_RMP || SYSCFG_CFGR1_USART1RX_DMA_RMP || SYSCFG_CFGR1_USART2_DMA_RMP || SYSCFG_CFGR1_USART3_DMA_RMP */
+
+#if defined(SYSCFG_CFGR1_SPI2_DMA_RMP)
+/**
+ * @brief Set DMA request remapping bits for SPI
+ * @rmtoll SYSCFG_CFGR1 SPI2_DMA_RMP LL_SYSCFG_SetRemapDMA_SPI
+ * @param Remap This parameter can be one of the following values:
+ * @arg @ref LL_SYSCFG_SPI2_RMP_DMA1_CH45
+ * @arg @ref LL_SYSCFG_SPI2_RMP_DMA1_CH67
+ * @retval None
+ */
+__STATIC_INLINE void LL_SYSCFG_SetRemapDMA_SPI(uint32_t Remap)
+{
+ MODIFY_REG(SYSCFG->CFGR1, SYSCFG_CFGR1_SPI2_DMA_RMP, Remap);
+}
+#endif /* SYSCFG_CFGR1_SPI2_DMA_RMP */
+
+#if defined(SYSCFG_CFGR1_I2C1_DMA_RMP)
+/**
+ * @brief Set DMA request remapping bits for I2C
+ * @rmtoll SYSCFG_CFGR1 I2C1_DMA_RMP LL_SYSCFG_SetRemapDMA_I2C
+ * @param Remap This parameter can be one of the following values:
+ * @arg @ref LL_SYSCFG_I2C1_RMP_DMA1_CH32
+ * @arg @ref LL_SYSCFG_I2C1_RMP_DMA1_CH76
+ * @retval None
+ */
+__STATIC_INLINE void LL_SYSCFG_SetRemapDMA_I2C(uint32_t Remap)
+{
+ MODIFY_REG(SYSCFG->CFGR1, SYSCFG_CFGR1_I2C1_DMA_RMP, Remap);
+}
+#endif /* SYSCFG_CFGR1_I2C1_DMA_RMP */
+
+#if defined(SYSCFG_CFGR1_ADC_DMA_RMP)
+/**
+ * @brief Set DMA request remapping bits for ADC
+ * @rmtoll SYSCFG_CFGR1 ADC_DMA_RMP LL_SYSCFG_SetRemapDMA_ADC
+ * @param Remap This parameter can be one of the following values:
+ * @arg @ref LL_SYSCFG_ADC1_RMP_DMA1_CH1
+ * @arg @ref LL_SYSCFG_ADC1_RMP_DMA1_CH2
+ * @retval None
+ */
+__STATIC_INLINE void LL_SYSCFG_SetRemapDMA_ADC(uint32_t Remap)
+{
+ MODIFY_REG(SYSCFG->CFGR1, SYSCFG_CFGR1_ADC_DMA_RMP, Remap);
+}
+#endif /* SYSCFG_CFGR1_ADC_DMA_RMP */
+
+#if defined(SYSCFG_CFGR1_TIM16_DMA_RMP) || defined(SYSCFG_CFGR1_TIM17_DMA_RMP) || defined(SYSCFG_CFGR1_TIM1_DMA_RMP) || defined(SYSCFG_CFGR1_TIM2_DMA_RMP) || defined(SYSCFG_CFGR1_TIM3_DMA_RMP)
+/**
+ * @brief Set DMA request remapping bits for TIM
+ * @rmtoll SYSCFG_CFGR1 TIM16_DMA_RMP LL_SYSCFG_SetRemapDMA_TIM\n
+ * SYSCFG_CFGR1 TIM17_DMA_RMP LL_SYSCFG_SetRemapDMA_TIM\n
+ * SYSCFG_CFGR1 TIM16_DMA_RMP2 LL_SYSCFG_SetRemapDMA_TIM\n
+ * SYSCFG_CFGR1 TIM17_DMA_RMP2 LL_SYSCFG_SetRemapDMA_TIM\n
+ * SYSCFG_CFGR1 TIM1_DMA_RMP LL_SYSCFG_SetRemapDMA_TIM\n
+ * SYSCFG_CFGR1 TIM2_DMA_RMP LL_SYSCFG_SetRemapDMA_TIM\n
+ * SYSCFG_CFGR1 TIM3_DMA_RMP LL_SYSCFG_SetRemapDMA_TIM
+ * @param Remap This parameter can be one of the following values:
+ * @arg @ref LL_SYSCFG_TIM16_RMP_DMA1_CH3 (*)
+ * @arg @ref LL_SYSCFG_TIM16_RMP_DMA1_CH4 (*)
+ * @arg @ref LL_SYSCFG_TIM16_RMP_DMA1_CH6 (*)
+ * @arg @ref LL_SYSCFG_TIM17_RMP_DMA1_CH1 (*)
+ * @arg @ref LL_SYSCFG_TIM17_RMP_DMA1_CH2 (*)
+ * @arg @ref LL_SYSCFG_TIM17_RMP_DMA1_CH7 (*)
+ * @arg @ref LL_SYSCFG_TIM1_RMP_DMA1_CH234 (*)
+ * @arg @ref LL_SYSCFG_TIM1_RMP_DMA1_CH6 (*)
+ * @arg @ref LL_SYSCFG_TIM2_RMP_DMA1_CH34 (*)
+ * @arg @ref LL_SYSCFG_TIM2_RMP_DMA1_CH7 (*)
+ * @arg @ref LL_SYSCFG_TIM3_RMP_DMA1_CH4 (*)
+ * @arg @ref LL_SYSCFG_TIM3_RMP_DMA1_CH6 (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+ */
+__STATIC_INLINE void LL_SYSCFG_SetRemapDMA_TIM(uint32_t Remap)
+{
+ MODIFY_REG(SYSCFG->CFGR1, (Remap & 0x00FF00FFU) << 8U, (Remap & 0xFF00FF00U));
+}
+#endif /* SYSCFG_CFGR1_TIM16_DMA_RMP || SYSCFG_CFGR1_TIM17_DMA_RMP || SYSCFG_CFGR1_TIM1_DMA_RMP || SYSCFG_CFGR1_TIM2_DMA_RMP || SYSCFG_CFGR1_TIM3_DMA_RMP */
+
+#if defined(SYSCFG_CFGR1_PA11_PA12_RMP)
+/**
+ * @brief Enable PIN pair PA11/12 mapped instead of PA9/10 (control the mapping of either
+ * PA9/10 or PA11/12 pin pair on small pin-count packages)
+ * @rmtoll SYSCFG_CFGR1 PA11_PA12_RMP LL_SYSCFG_EnablePinRemap
+ * @retval None
+ */
+__STATIC_INLINE void LL_SYSCFG_EnablePinRemap(void)
+{
+ SET_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_PA11_PA12_RMP);
+}
+
+/**
+ * @brief Disable PIN pair PA11/12 mapped instead of PA9/10 (control the mapping of either
+ * PA9/10 or PA11/12 pin pair on small pin-count packages)
+ * @rmtoll SYSCFG_CFGR1 PA11_PA12_RMP LL_SYSCFG_DisablePinRemap
+ * @retval None
+ */
+__STATIC_INLINE void LL_SYSCFG_DisablePinRemap(void)
+{
+ CLEAR_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_PA11_PA12_RMP);
+}
+#endif /* SYSCFG_CFGR1_PA11_PA12_RMP */
+
+/**
+ * @brief Enable the I2C fast mode plus driving capability.
+ * @rmtoll SYSCFG_CFGR1 I2C_FMP_PB6 LL_SYSCFG_EnableFastModePlus\n
+ * SYSCFG_CFGR1 I2C_FMP_PB7 LL_SYSCFG_EnableFastModePlus\n
+ * SYSCFG_CFGR1 I2C_FMP_PB8 LL_SYSCFG_EnableFastModePlus\n
+ * SYSCFG_CFGR1 I2C_FMP_PB9 LL_SYSCFG_EnableFastModePlus\n
+ * SYSCFG_CFGR1 I2C_FMP_I2C1 LL_SYSCFG_EnableFastModePlus\n
+ * SYSCFG_CFGR1 I2C_FMP_I2C2 LL_SYSCFG_EnableFastModePlus\n
+ * SYSCFG_CFGR1 I2C_FMP_PA9 LL_SYSCFG_EnableFastModePlus\n
+ * SYSCFG_CFGR1 I2C_FMP_PA10 LL_SYSCFG_EnableFastModePlus
+ * @param ConfigFastModePlus This parameter can be a combination of the following values:
+ * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB6
+ * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB7
+ * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB8
+ * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB9
+ * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C1 (*)
+ * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C2 (*)
+ * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PA9 (*)
+ * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PA10 (*)
+ *
+ * (*) value not defined in all devices
+ * @retval None
+ */
+__STATIC_INLINE void LL_SYSCFG_EnableFastModePlus(uint32_t ConfigFastModePlus)
+{
+ SET_BIT(SYSCFG->CFGR1, ConfigFastModePlus);
+}
+
+/**
+ * @brief Disable the I2C fast mode plus driving capability.
+ * @rmtoll SYSCFG_CFGR1 I2C_FMP_PB6 LL_SYSCFG_DisableFastModePlus\n
+ * SYSCFG_CFGR1 I2C_FMP_PB7 LL_SYSCFG_DisableFastModePlus\n
+ * SYSCFG_CFGR1 I2C_FMP_PB8 LL_SYSCFG_DisableFastModePlus\n
+ * SYSCFG_CFGR1 I2C_FMP_PB9 LL_SYSCFG_DisableFastModePlus\n
+ * SYSCFG_CFGR1 I2C_FMP_I2C1 LL_SYSCFG_DisableFastModePlus\n
+ * SYSCFG_CFGR1 I2C_FMP_I2C2 LL_SYSCFG_DisableFastModePlus\n
+ * SYSCFG_CFGR1 I2C_FMP_PA9 LL_SYSCFG_DisableFastModePlus\n
+ * SYSCFG_CFGR1 I2C_FMP_PA10 LL_SYSCFG_DisableFastModePlus
+ * @param ConfigFastModePlus This parameter can be a combination of the following values:
+ * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB6
+ * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB7
+ * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB8
+ * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB9
+ * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C1 (*)
+ * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C2 (*)
+ * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PA9 (*)
+ * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PA10 (*)
+ *
+ * (*) value not defined in all devices
+ * @retval None
+ */
+__STATIC_INLINE void LL_SYSCFG_DisableFastModePlus(uint32_t ConfigFastModePlus)
+{
+ CLEAR_BIT(SYSCFG->CFGR1, ConfigFastModePlus);
+}
+
+/**
+ * @brief Configure source input for the EXTI external interrupt.
+ * @rmtoll SYSCFG_EXTICR1 EXTI0 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR1 EXTI1 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR1 EXTI2 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR1 EXTI3 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR2 EXTI4 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR2 EXTI5 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR2 EXTI6 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR2 EXTI7 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR3 EXTI8 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR3 EXTI9 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR3 EXTI10 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR3 EXTI11 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR4 EXTI12 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR4 EXTI13 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR4 EXTI14 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR4 EXTI15 LL_SYSCFG_SetEXTISource
+ * @param Port This parameter can be one of the following values:
+ * @arg @ref LL_SYSCFG_EXTI_PORTA
+ * @arg @ref LL_SYSCFG_EXTI_PORTB
+ * @arg @ref LL_SYSCFG_EXTI_PORTC
+ * @arg @ref LL_SYSCFG_EXTI_PORTD (*)
+ * @arg @ref LL_SYSCFG_EXTI_PORTE (*)
+ * @arg @ref LL_SYSCFG_EXTI_PORTF
+ *
+ * (*) value not defined in all devices
+ * @param Line This parameter can be one of the following values:
+ * @arg @ref LL_SYSCFG_EXTI_LINE0
+ * @arg @ref LL_SYSCFG_EXTI_LINE1
+ * @arg @ref LL_SYSCFG_EXTI_LINE2
+ * @arg @ref LL_SYSCFG_EXTI_LINE3
+ * @arg @ref LL_SYSCFG_EXTI_LINE4
+ * @arg @ref LL_SYSCFG_EXTI_LINE5
+ * @arg @ref LL_SYSCFG_EXTI_LINE6
+ * @arg @ref LL_SYSCFG_EXTI_LINE7
+ * @arg @ref LL_SYSCFG_EXTI_LINE8
+ * @arg @ref LL_SYSCFG_EXTI_LINE9
+ * @arg @ref LL_SYSCFG_EXTI_LINE10
+ * @arg @ref LL_SYSCFG_EXTI_LINE11
+ * @arg @ref LL_SYSCFG_EXTI_LINE12
+ * @arg @ref LL_SYSCFG_EXTI_LINE13
+ * @arg @ref LL_SYSCFG_EXTI_LINE14
+ * @arg @ref LL_SYSCFG_EXTI_LINE15
+ * @retval None
+ */
+__STATIC_INLINE void LL_SYSCFG_SetEXTISource(uint32_t Port, uint32_t Line)
+{
+ MODIFY_REG(SYSCFG->EXTICR[Line & 0xFF], SYSCFG_EXTICR1_EXTI0 << (Line >> 16), Port << (Line >> 16));
+}
+
+/**
+ * @brief Get the configured defined for specific EXTI Line
+ * @rmtoll SYSCFG_EXTICR1 EXTI0 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR1 EXTI1 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR1 EXTI2 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR1 EXTI3 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR2 EXTI4 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR2 EXTI5 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR2 EXTI6 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR2 EXTI7 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR3 EXTI8 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR3 EXTI9 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR3 EXTI10 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR3 EXTI11 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR4 EXTI12 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR4 EXTI13 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR4 EXTI14 LL_SYSCFG_SetEXTISource\n
+ * SYSCFG_EXTICR4 EXTI15 LL_SYSCFG_SetEXTISource
+ * @param Line This parameter can be one of the following values:
+ * @arg @ref LL_SYSCFG_EXTI_LINE0
+ * @arg @ref LL_SYSCFG_EXTI_LINE1
+ * @arg @ref LL_SYSCFG_EXTI_LINE2
+ * @arg @ref LL_SYSCFG_EXTI_LINE3
+ * @arg @ref LL_SYSCFG_EXTI_LINE4
+ * @arg @ref LL_SYSCFG_EXTI_LINE5
+ * @arg @ref LL_SYSCFG_EXTI_LINE6
+ * @arg @ref LL_SYSCFG_EXTI_LINE7
+ * @arg @ref LL_SYSCFG_EXTI_LINE8
+ * @arg @ref LL_SYSCFG_EXTI_LINE9
+ * @arg @ref LL_SYSCFG_EXTI_LINE10
+ * @arg @ref LL_SYSCFG_EXTI_LINE11
+ * @arg @ref LL_SYSCFG_EXTI_LINE12
+ * @arg @ref LL_SYSCFG_EXTI_LINE13
+ * @arg @ref LL_SYSCFG_EXTI_LINE14
+ * @arg @ref LL_SYSCFG_EXTI_LINE15
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_SYSCFG_EXTI_PORTA
+ * @arg @ref LL_SYSCFG_EXTI_PORTB
+ * @arg @ref LL_SYSCFG_EXTI_PORTC
+ * @arg @ref LL_SYSCFG_EXTI_PORTD (*)
+ * @arg @ref LL_SYSCFG_EXTI_PORTE (*)
+ * @arg @ref LL_SYSCFG_EXTI_PORTF
+ *
+ * (*) value not defined in all devices
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_GetEXTISource(uint32_t Line)
+{
+ return (uint32_t)(READ_BIT(SYSCFG->EXTICR[Line & 0xFF], (SYSCFG_EXTICR1_EXTI0 << (Line >> 16))) >> (Line >> 16));
+}
+
+#if defined(SYSCFG_ITLINE0_SR_EWDG)
+/**
+ * @brief Check if Window watchdog interrupt occurred or not.
+ * @rmtoll SYSCFG_ITLINE0 SR_EWDG LL_SYSCFG_IsActiveFlag_WWDG
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_WWDG(void)
+{
+ return (READ_BIT(SYSCFG->IT_LINE_SR[0], SYSCFG_ITLINE0_SR_EWDG) == (SYSCFG_ITLINE0_SR_EWDG));
+}
+#endif /* SYSCFG_ITLINE0_SR_EWDG */
+
+#if defined(SYSCFG_ITLINE1_SR_PVDOUT)
+/**
+ * @brief Check if PVD supply monitoring interrupt occurred or not (EXTI line 16).
+ * @rmtoll SYSCFG_ITLINE1 SR_PVDOUT LL_SYSCFG_IsActiveFlag_PVDOUT
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_PVDOUT(void)
+{
+ return (READ_BIT(SYSCFG->IT_LINE_SR[1], SYSCFG_ITLINE1_SR_PVDOUT) == (SYSCFG_ITLINE1_SR_PVDOUT));
+}
+#endif /* SYSCFG_ITLINE1_SR_PVDOUT */
+
+#if defined(SYSCFG_ITLINE1_SR_VDDIO2)
+/**
+ * @brief Check if VDDIO2 supply monitoring interrupt occurred or not (EXTI line 31).
+ * @rmtoll SYSCFG_ITLINE1 SR_VDDIO2 LL_SYSCFG_IsActiveFlag_VDDIO2
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_VDDIO2(void)
+{
+ return (READ_BIT(SYSCFG->IT_LINE_SR[1], SYSCFG_ITLINE1_SR_VDDIO2) == (SYSCFG_ITLINE1_SR_VDDIO2));
+}
+#endif /* SYSCFG_ITLINE1_SR_VDDIO2 */
+
+#if defined(SYSCFG_ITLINE2_SR_RTC_WAKEUP)
+/**
+ * @brief Check if RTC Wake Up interrupt occurred or not (EXTI line 20).
+ * @rmtoll SYSCFG_ITLINE2 SR_RTC_WAKEUP LL_SYSCFG_IsActiveFlag_RTC_WAKEUP
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_RTC_WAKEUP(void)
+{
+ return (READ_BIT(SYSCFG->IT_LINE_SR[2], SYSCFG_ITLINE2_SR_RTC_WAKEUP) == (SYSCFG_ITLINE2_SR_RTC_WAKEUP));
+}
+#endif /* SYSCFG_ITLINE2_SR_RTC_WAKEUP */
+
+#if defined(SYSCFG_ITLINE2_SR_RTC_TSTAMP)
+/**
+ * @brief Check if RTC Tamper and TimeStamp interrupt occurred or not (EXTI line 19).
+ * @rmtoll SYSCFG_ITLINE2 SR_RTC_TSTAMP LL_SYSCFG_IsActiveFlag_RTC_TSTAMP
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_RTC_TSTAMP(void)
+{
+ return (READ_BIT(SYSCFG->IT_LINE_SR[2], SYSCFG_ITLINE2_SR_RTC_TSTAMP) == (SYSCFG_ITLINE2_SR_RTC_TSTAMP));
+}
+#endif /* SYSCFG_ITLINE2_SR_RTC_TSTAMP */
+
+#if defined(SYSCFG_ITLINE2_SR_RTC_ALRA)
+/**
+ * @brief Check if RTC Alarm interrupt occurred or not (EXTI line 17).
+ * @rmtoll SYSCFG_ITLINE2 SR_RTC_ALRA LL_SYSCFG_IsActiveFlag_RTC_ALRA
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_RTC_ALRA(void)
+{
+ return (READ_BIT(SYSCFG->IT_LINE_SR[2], SYSCFG_ITLINE2_SR_RTC_ALRA) == (SYSCFG_ITLINE2_SR_RTC_ALRA));
+}
+#endif /* SYSCFG_ITLINE2_SR_RTC_ALRA */
+
+#if defined(SYSCFG_ITLINE3_SR_FLASH_ITF)
+/**
+ * @brief Check if Flash interface interrupt occurred or not.
+ * @rmtoll SYSCFG_ITLINE3 SR_FLASH_ITF LL_SYSCFG_IsActiveFlag_FLASH_ITF
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_FLASH_ITF(void)
+{
+ return (READ_BIT(SYSCFG->IT_LINE_SR[3], SYSCFG_ITLINE3_SR_FLASH_ITF) == (SYSCFG_ITLINE3_SR_FLASH_ITF));
+}
+#endif /* SYSCFG_ITLINE3_SR_FLASH_ITF */
+
+#if defined(SYSCFG_ITLINE4_SR_CRS)
+/**
+ * @brief Check if Clock recovery system interrupt occurred or not.
+ * @rmtoll SYSCFG_ITLINE4 SR_CRS LL_SYSCFG_IsActiveFlag_CRS
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_CRS(void)
+{
+ return (READ_BIT(SYSCFG->IT_LINE_SR[4], SYSCFG_ITLINE4_SR_CRS) == (SYSCFG_ITLINE4_SR_CRS));
+}
+#endif /* SYSCFG_ITLINE4_SR_CRS */
+
+#if defined(SYSCFG_ITLINE4_SR_CLK_CTRL)
+/**
+ * @brief Check if Reset and clock control interrupt occurred or not.
+ * @rmtoll SYSCFG_ITLINE4 SR_CLK_CTRL LL_SYSCFG_IsActiveFlag_CLK_CTRL
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_CLK_CTRL(void)
+{
+ return (READ_BIT(SYSCFG->IT_LINE_SR[4], SYSCFG_ITLINE4_SR_CLK_CTRL) == (SYSCFG_ITLINE4_SR_CLK_CTRL));
+}
+#endif /* SYSCFG_ITLINE4_SR_CLK_CTRL */
+
+#if defined(SYSCFG_ITLINE5_SR_EXTI0)
+/**
+ * @brief Check if EXTI line 0 interrupt occurred or not.
+ * @rmtoll SYSCFG_ITLINE5 SR_EXTI0 LL_SYSCFG_IsActiveFlag_EXTI0
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI0(void)
+{
+ return (READ_BIT(SYSCFG->IT_LINE_SR[5], SYSCFG_ITLINE5_SR_EXTI0) == (SYSCFG_ITLINE5_SR_EXTI0));
+}
+#endif /* SYSCFG_ITLINE5_SR_EXTI0 */
+
+#if defined(SYSCFG_ITLINE5_SR_EXTI1)
+/**
+ * @brief Check if EXTI line 1 interrupt occurred or not.
+ * @rmtoll SYSCFG_ITLINE5 SR_EXTI1 LL_SYSCFG_IsActiveFlag_EXTI1
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI1(void)
+{
+ return (READ_BIT(SYSCFG->IT_LINE_SR[5], SYSCFG_ITLINE5_SR_EXTI1) == (SYSCFG_ITLINE5_SR_EXTI1));
+}
+#endif /* SYSCFG_ITLINE5_SR_EXTI1 */
+
+#if defined(SYSCFG_ITLINE6_SR_EXTI2)
+/**
+ * @brief Check if EXTI line 2 interrupt occurred or not.
+ * @rmtoll SYSCFG_ITLINE6 SR_EXTI2 LL_SYSCFG_IsActiveFlag_EXTI2
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI2(void)
+{
+ return (READ_BIT(SYSCFG->IT_LINE_SR[6], SYSCFG_ITLINE6_SR_EXTI2) == (SYSCFG_ITLINE6_SR_EXTI2));
+}
+#endif /* SYSCFG_ITLINE6_SR_EXTI2 */
+
+#if defined(SYSCFG_ITLINE6_SR_EXTI3)
+/**
+ * @brief Check if EXTI line 3 interrupt occurred or not.
+ * @rmtoll SYSCFG_ITLINE6 SR_EXTI3 LL_SYSCFG_IsActiveFlag_EXTI3
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI3(void)
+{
+ return (READ_BIT(SYSCFG->IT_LINE_SR[6], SYSCFG_ITLINE6_SR_EXTI3) == (SYSCFG_ITLINE6_SR_EXTI3));
+}
+#endif /* SYSCFG_ITLINE6_SR_EXTI3 */
+
+#if defined(SYSCFG_ITLINE7_SR_EXTI4)
+/**
+ * @brief Check if EXTI line 4 interrupt occurred or not.
+ * @rmtoll SYSCFG_ITLINE7 SR_EXTI4 LL_SYSCFG_IsActiveFlag_EXTI4
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI4(void)
+{
+ return (READ_BIT(SYSCFG->IT_LINE_SR[7], SYSCFG_ITLINE7_SR_EXTI4) == (SYSCFG_ITLINE7_SR_EXTI4));
+}
+#endif /* SYSCFG_ITLINE7_SR_EXTI4 */
+
+#if defined(SYSCFG_ITLINE7_SR_EXTI5)
+/**
+ * @brief Check if EXTI line 5 interrupt occurred or not.
+ * @rmtoll SYSCFG_ITLINE7 SR_EXTI5 LL_SYSCFG_IsActiveFlag_EXTI5
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI5(void)
+{
+ return (READ_BIT(SYSCFG->IT_LINE_SR[7], SYSCFG_ITLINE7_SR_EXTI5) == (SYSCFG_ITLINE7_SR_EXTI5));
+}
+#endif /* SYSCFG_ITLINE7_SR_EXTI5 */
+
+#if defined(SYSCFG_ITLINE7_SR_EXTI6)
+/**
+ * @brief Check if EXTI line 6 interrupt occurred or not.
+ * @rmtoll SYSCFG_ITLINE7 SR_EXTI6 LL_SYSCFG_IsActiveFlag_EXTI6
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI6(void)
+{
+ return (READ_BIT(SYSCFG->IT_LINE_SR[7], SYSCFG_ITLINE7_SR_EXTI6) == (SYSCFG_ITLINE7_SR_EXTI6));
+}
+#endif /* SYSCFG_ITLINE7_SR_EXTI6 */
+
+#if defined(SYSCFG_ITLINE7_SR_EXTI7)
+/**
+ * @brief Check if EXTI line 7 interrupt occurred or not.
+ * @rmtoll SYSCFG_ITLINE7 SR_EXTI7 LL_SYSCFG_IsActiveFlag_EXTI7
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI7(void)
+{
+ return (READ_BIT(SYSCFG->IT_LINE_SR[7], SYSCFG_ITLINE7_SR_EXTI7) == (SYSCFG_ITLINE7_SR_EXTI7));
+}
+#endif /* SYSCFG_ITLINE7_SR_EXTI7 */
+
+#if defined(SYSCFG_ITLINE7_SR_EXTI8)
+/**
+ * @brief Check if EXTI line 8 interrupt occurred or not.
+ * @rmtoll SYSCFG_ITLINE7 SR_EXTI8 LL_SYSCFG_IsActiveFlag_EXTI8
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI8(void)
+{
+ return (READ_BIT(SYSCFG->IT_LINE_SR[7], SYSCFG_ITLINE7_SR_EXTI8) == (SYSCFG_ITLINE7_SR_EXTI8));
+}
+#endif /* SYSCFG_ITLINE7_SR_EXTI8 */
+
+#if defined(SYSCFG_ITLINE7_SR_EXTI9)
+/**
+ * @brief Check if EXTI line 9 interrupt occurred or not.
+ * @rmtoll SYSCFG_ITLINE7 SR_EXTI9 LL_SYSCFG_IsActiveFlag_EXTI9
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI9(void)
+{
+ return (READ_BIT(SYSCFG->IT_LINE_SR[7], SYSCFG_ITLINE7_SR_EXTI9) == (SYSCFG_ITLINE7_SR_EXTI9));
+}
+#endif /* SYSCFG_ITLINE7_SR_EXTI9 */
+
+#if defined(SYSCFG_ITLINE7_SR_EXTI10)
+/**
+ * @brief Check if EXTI line 10 interrupt occurred or not.
+ * @rmtoll SYSCFG_ITLINE7 SR_EXTI10 LL_SYSCFG_IsActiveFlag_EXTI10
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI10(void)
+{
+ return (READ_BIT(SYSCFG->IT_LINE_SR[7], SYSCFG_ITLINE7_SR_EXTI10) == (SYSCFG_ITLINE7_SR_EXTI10));
+}
+#endif /* SYSCFG_ITLINE7_SR_EXTI10 */
+
+#if defined(SYSCFG_ITLINE7_SR_EXTI11)
+/**
+ * @brief Check if EXTI line 11 interrupt occurred or not.
+ * @rmtoll SYSCFG_ITLINE7 SR_EXTI11 LL_SYSCFG_IsActiveFlag_EXTI11
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI11(void)
+{
+ return (READ_BIT(SYSCFG->IT_LINE_SR[7], SYSCFG_ITLINE7_SR_EXTI11) == (SYSCFG_ITLINE7_SR_EXTI11));
+}
+#endif /* SYSCFG_ITLINE7_SR_EXTI11 */
+
+#if defined(SYSCFG_ITLINE7_SR_EXTI12)
+/**
+ * @brief Check if EXTI line 12 interrupt occurred or not.
+ * @rmtoll SYSCFG_ITLINE7 SR_EXTI12 LL_SYSCFG_IsActiveFlag_EXTI12
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI12(void)
+{
+ return (READ_BIT(SYSCFG->IT_LINE_SR[7], SYSCFG_ITLINE7_SR_EXTI12) == (SYSCFG_ITLINE7_SR_EXTI12));
+}
+#endif /* SYSCFG_ITLINE7_SR_EXTI12 */
+
+#if defined(SYSCFG_ITLINE7_SR_EXTI13)
+/**
+ * @brief Check if EXTI line 13 interrupt occurred or not.
+ * @rmtoll SYSCFG_ITLINE7 SR_EXTI13 LL_SYSCFG_IsActiveFlag_EXTI13
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI13(void)
+{
+ return (READ_BIT(SYSCFG->IT_LINE_SR[7], SYSCFG_ITLINE7_SR_EXTI13) == (SYSCFG_ITLINE7_SR_EXTI13));
+}
+#endif /* SYSCFG_ITLINE7_SR_EXTI13 */
+
+#if defined(SYSCFG_ITLINE7_SR_EXTI14)
+/**
+ * @brief Check if EXTI line 14 interrupt occurred or not.
+ * @rmtoll SYSCFG_ITLINE7 SR_EXTI14 LL_SYSCFG_IsActiveFlag_EXTI14
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI14(void)
+{
+ return (READ_BIT(SYSCFG->IT_LINE_SR[7], SYSCFG_ITLINE7_SR_EXTI14) == (SYSCFG_ITLINE7_SR_EXTI14));
+}
+#endif /* SYSCFG_ITLINE7_SR_EXTI14 */
+
+#if defined(SYSCFG_ITLINE7_SR_EXTI15)
+/**
+ * @brief Check if EXTI line 15 interrupt occurred or not.
+ * @rmtoll SYSCFG_ITLINE7 SR_EXTI15 LL_SYSCFG_IsActiveFlag_EXTI15
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_EXTI15(void)
+{
+ return (READ_BIT(SYSCFG->IT_LINE_SR[7], SYSCFG_ITLINE7_SR_EXTI15) == (SYSCFG_ITLINE7_SR_EXTI15));
+}
+#endif /* SYSCFG_ITLINE7_SR_EXTI15 */
+
+#if defined(SYSCFG_ITLINE8_SR_TSC_EOA)
+/**
+ * @brief Check if Touch sensing controller end of acquisition interrupt occurred or not.
+ * @rmtoll SYSCFG_ITLINE8 SR_TSC_EOA LL_SYSCFG_IsActiveFlag_TSC_EOA
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_TSC_EOA(void)
+{
+ return (READ_BIT(SYSCFG->IT_LINE_SR[8], SYSCFG_ITLINE8_SR_TSC_EOA) == (SYSCFG_ITLINE8_SR_TSC_EOA));
+}
+#endif /* SYSCFG_ITLINE8_SR_TSC_EOA */
+
+#if defined(SYSCFG_ITLINE8_SR_TSC_MCE)
+/**
+ * @brief Check if Touch sensing controller max counterror interrupt occurred or not.
+ * @rmtoll SYSCFG_ITLINE8 SR_TSC_MCE LL_SYSCFG_IsActiveFlag_TSC_MCE
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_TSC_MCE(void)
+{
+ return (READ_BIT(SYSCFG->IT_LINE_SR[8], SYSCFG_ITLINE8_SR_TSC_MCE) == (SYSCFG_ITLINE8_SR_TSC_MCE));
+}
+#endif /* SYSCFG_ITLINE8_SR_TSC_MCE */
+
+#if defined(SYSCFG_ITLINE9_SR_DMA1_CH1)
+/**
+ * @brief Check if DMA1 channel 1 interrupt occurred or not.
+ * @rmtoll SYSCFG_ITLINE9 SR_DMA1_CH1 LL_SYSCFG_IsActiveFlag_DMA1_CH1
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_DMA1_CH1(void)
+{
+ return (READ_BIT(SYSCFG->IT_LINE_SR[9], SYSCFG_ITLINE9_SR_DMA1_CH1) == (SYSCFG_ITLINE9_SR_DMA1_CH1));
+}
+#endif /* SYSCFG_ITLINE9_SR_DMA1_CH1 */
+
+#if defined(SYSCFG_ITLINE10_SR_DMA1_CH2)
+/**
+ * @brief Check if DMA1 channel 2 interrupt occurred or not.
+ * @rmtoll SYSCFG_ITLINE10 SR_DMA1_CH2 LL_SYSCFG_IsActiveFlag_DMA1_CH2
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_DMA1_CH2(void)
+{
+ return (READ_BIT(SYSCFG->IT_LINE_SR[10], SYSCFG_ITLINE10_SR_DMA1_CH2) == (SYSCFG_ITLINE10_SR_DMA1_CH2));
+}
+#endif /* SYSCFG_ITLINE10_SR_DMA1_CH2 */
+
+#if defined(SYSCFG_ITLINE10_SR_DMA1_CH3)
+/**
+ * @brief Check if DMA1 channel 3 interrupt occurred or not.
+ * @rmtoll SYSCFG_ITLINE10 SR_DMA1_CH3 LL_SYSCFG_IsActiveFlag_DMA1_CH3
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_DMA1_CH3(void)
+{
+ return (READ_BIT(SYSCFG->IT_LINE_SR[10], SYSCFG_ITLINE10_SR_DMA1_CH3) == (SYSCFG_ITLINE10_SR_DMA1_CH3));
+}
+#endif /* SYSCFG_ITLINE10_SR_DMA1_CH3 */
+
+#if defined(SYSCFG_ITLINE10_SR_DMA2_CH1)
+/**
+ * @brief Check if DMA2 channel 1 interrupt occurred or not.
+ * @rmtoll SYSCFG_ITLINE10 SR_DMA2_CH1 LL_SYSCFG_IsActiveFlag_DMA2_CH1
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_DMA2_CH1(void)
+{
+ return (READ_BIT(SYSCFG->IT_LINE_SR[10], SYSCFG_ITLINE10_SR_DMA2_CH1) == (SYSCFG_ITLINE10_SR_DMA2_CH1));
+}
+#endif /* SYSCFG_ITLINE10_SR_DMA2_CH1 */
+
+#if defined(SYSCFG_ITLINE10_SR_DMA2_CH2)
+/**
+ * @brief Check if DMA2 channel 2 interrupt occurred or not.
+ * @rmtoll SYSCFG_ITLINE10 SR_DMA2_CH2 LL_SYSCFG_IsActiveFlag_DMA2_CH2
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_DMA2_CH2(void)
+{
+ return (READ_BIT(SYSCFG->IT_LINE_SR[10], SYSCFG_ITLINE10_SR_DMA2_CH2) == (SYSCFG_ITLINE10_SR_DMA2_CH2));
+}
+#endif /* SYSCFG_ITLINE10_SR_DMA2_CH2 */
+
+#if defined(SYSCFG_ITLINE11_SR_DMA1_CH4)
+/**
+ * @brief Check if DMA1 channel 4 interrupt occurred or not.
+ * @rmtoll SYSCFG_ITLINE11 SR_DMA1_CH4 LL_SYSCFG_IsActiveFlag_DMA1_CH4
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_DMA1_CH4(void)
+{
+ return (READ_BIT(SYSCFG->IT_LINE_SR[11], SYSCFG_ITLINE11_SR_DMA1_CH4) == (SYSCFG_ITLINE11_SR_DMA1_CH4));
+}
+#endif /* SYSCFG_ITLINE11_SR_DMA1_CH4 */
+
+#if defined(SYSCFG_ITLINE11_SR_DMA1_CH5)
+/**
+ * @brief Check if DMA1 channel 5 interrupt occurred or not.
+ * @rmtoll SYSCFG_ITLINE11 SR_DMA1_CH5 LL_SYSCFG_IsActiveFlag_DMA1_CH5
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_DMA1_CH5(void)
+{
+ return (READ_BIT(SYSCFG->IT_LINE_SR[11], SYSCFG_ITLINE11_SR_DMA1_CH5) == (SYSCFG_ITLINE11_SR_DMA1_CH5));
+}
+#endif /* SYSCFG_ITLINE11_SR_DMA1_CH5 */
+
+#if defined(SYSCFG_ITLINE11_SR_DMA1_CH6)
+/**
+ * @brief Check if DMA1 channel 6 interrupt occurred or not.
+ * @rmtoll SYSCFG_ITLINE11 SR_DMA1_CH6 LL_SYSCFG_IsActiveFlag_DMA1_CH6
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_DMA1_CH6(void)
+{
+ return (READ_BIT(SYSCFG->IT_LINE_SR[11], SYSCFG_ITLINE11_SR_DMA1_CH6) == (SYSCFG_ITLINE11_SR_DMA1_CH6));
+}
+#endif /* SYSCFG_ITLINE11_SR_DMA1_CH6 */
+
+#if defined(SYSCFG_ITLINE11_SR_DMA1_CH7)
+/**
+ * @brief Check if DMA1 channel 7 interrupt occurred or not.
+ * @rmtoll SYSCFG_ITLINE11 SR_DMA1_CH7 LL_SYSCFG_IsActiveFlag_DMA1_CH7
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_DMA1_CH7(void)
+{
+ return (READ_BIT(SYSCFG->IT_LINE_SR[11], SYSCFG_ITLINE11_SR_DMA1_CH7) == (SYSCFG_ITLINE11_SR_DMA1_CH7));
+}
+#endif /* SYSCFG_ITLINE11_SR_DMA1_CH7 */
+
+#if defined(SYSCFG_ITLINE11_SR_DMA2_CH3)
+/**
+ * @brief Check if DMA2 channel 3 interrupt occurred or not.
+ * @rmtoll SYSCFG_ITLINE11 SR_DMA2_CH3 LL_SYSCFG_IsActiveFlag_DMA2_CH3
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_DMA2_CH3(void)
+{
+ return (READ_BIT(SYSCFG->IT_LINE_SR[11], SYSCFG_ITLINE11_SR_DMA2_CH3) == (SYSCFG_ITLINE11_SR_DMA2_CH3));
+}
+#endif /* SYSCFG_ITLINE11_SR_DMA2_CH3 */
+
+#if defined(SYSCFG_ITLINE11_SR_DMA2_CH4)
+/**
+ * @brief Check if DMA2 channel 4 interrupt occurred or not.
+ * @rmtoll SYSCFG_ITLINE11 SR_DMA2_CH4 LL_SYSCFG_IsActiveFlag_DMA2_CH4
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_DMA2_CH4(void)
+{
+ return (READ_BIT(SYSCFG->IT_LINE_SR[11], SYSCFG_ITLINE11_SR_DMA2_CH4) == (SYSCFG_ITLINE11_SR_DMA2_CH4));
+}
+#endif /* SYSCFG_ITLINE11_SR_DMA2_CH4 */
+
+#if defined(SYSCFG_ITLINE11_SR_DMA2_CH5)
+/**
+ * @brief Check if DMA2 channel 5 interrupt occurred or not.
+ * @rmtoll SYSCFG_ITLINE11 SR_DMA2_CH5 LL_SYSCFG_IsActiveFlag_DMA2_CH5
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_DMA2_CH5(void)
+{
+ return (READ_BIT(SYSCFG->IT_LINE_SR[11], SYSCFG_ITLINE11_SR_DMA2_CH5) == (SYSCFG_ITLINE11_SR_DMA2_CH5));
+}
+#endif /* SYSCFG_ITLINE11_SR_DMA2_CH5 */
+
+#if defined(SYSCFG_ITLINE12_SR_ADC)
+/**
+ * @brief Check if ADC interrupt occurred or not.
+ * @rmtoll SYSCFG_ITLINE12 SR_ADC LL_SYSCFG_IsActiveFlag_ADC
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_ADC(void)
+{
+ return (READ_BIT(SYSCFG->IT_LINE_SR[12], SYSCFG_ITLINE12_SR_ADC) == (SYSCFG_ITLINE12_SR_ADC));
+}
+#endif /* SYSCFG_ITLINE12_SR_ADC */
+
+#if defined(SYSCFG_ITLINE12_SR_COMP1)
+/**
+ * @brief Check if Comparator 1 interrupt occurred or not (EXTI line 21).
+ * @rmtoll SYSCFG_ITLINE12 SR_COMP1 LL_SYSCFG_IsActiveFlag_COMP1
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_COMP1(void)
+{
+ return (READ_BIT(SYSCFG->IT_LINE_SR[12], SYSCFG_ITLINE12_SR_COMP1) == (SYSCFG_ITLINE12_SR_COMP1));
+}
+#endif /* SYSCFG_ITLINE12_SR_COMP1 */
+
+#if defined(SYSCFG_ITLINE12_SR_COMP2)
+/**
+ * @brief Check if Comparator 2 interrupt occurred or not (EXTI line 22).
+ * @rmtoll SYSCFG_ITLINE12 SR_COMP2 LL_SYSCFG_IsActiveFlag_COMP2
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_COMP2(void)
+{
+ return (READ_BIT(SYSCFG->IT_LINE_SR[12], SYSCFG_ITLINE12_SR_COMP2) == (SYSCFG_ITLINE12_SR_COMP2));
+}
+#endif /* SYSCFG_ITLINE12_SR_COMP2 */
+
+#if defined(SYSCFG_ITLINE13_SR_TIM1_BRK)
+/**
+ * @brief Check if Timer 1 break interrupt occurred or not.
+ * @rmtoll SYSCFG_ITLINE13 SR_TIM1_BRK LL_SYSCFG_IsActiveFlag_TIM1_BRK
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_TIM1_BRK(void)
+{
+ return (READ_BIT(SYSCFG->IT_LINE_SR[13], SYSCFG_ITLINE13_SR_TIM1_BRK) == (SYSCFG_ITLINE13_SR_TIM1_BRK));
+}
+#endif /* SYSCFG_ITLINE13_SR_TIM1_BRK */
+
+#if defined(SYSCFG_ITLINE13_SR_TIM1_UPD)
+/**
+ * @brief Check if Timer 1 update interrupt occurred or not.
+ * @rmtoll SYSCFG_ITLINE13 SR_TIM1_UPD LL_SYSCFG_IsActiveFlag_TIM1_UPD
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_TIM1_UPD(void)
+{
+ return (READ_BIT(SYSCFG->IT_LINE_SR[13], SYSCFG_ITLINE13_SR_TIM1_UPD) == (SYSCFG_ITLINE13_SR_TIM1_UPD));
+}
+#endif /* SYSCFG_ITLINE13_SR_TIM1_UPD */
+
+#if defined(SYSCFG_ITLINE13_SR_TIM1_TRG)
+/**
+ * @brief Check if Timer 1 trigger interrupt occurred or not.
+ * @rmtoll SYSCFG_ITLINE13 SR_TIM1_TRG LL_SYSCFG_IsActiveFlag_TIM1_TRG
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_TIM1_TRG(void)
+{
+ return (READ_BIT(SYSCFG->IT_LINE_SR[13], SYSCFG_ITLINE13_SR_TIM1_TRG) == (SYSCFG_ITLINE13_SR_TIM1_TRG));
+}
+#endif /* SYSCFG_ITLINE13_SR_TIM1_TRG */
+
+#if defined(SYSCFG_ITLINE13_SR_TIM1_CCU)
+/**
+ * @brief Check if Timer 1 commutation interrupt occurred or not.
+ * @rmtoll SYSCFG_ITLINE13 SR_TIM1_CCU LL_SYSCFG_IsActiveFlag_TIM1_CCU
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_TIM1_CCU(void)
+{
+ return (READ_BIT(SYSCFG->IT_LINE_SR[13], SYSCFG_ITLINE13_SR_TIM1_CCU) == (SYSCFG_ITLINE13_SR_TIM1_CCU));
+}
+#endif /* SYSCFG_ITLINE13_SR_TIM1_CCU */
+
+#if defined(SYSCFG_ITLINE14_SR_TIM1_CC)
+/**
+ * @brief Check if Timer 1 capture compare interrupt occurred or not.
+ * @rmtoll SYSCFG_ITLINE14 SR_TIM1_CC LL_SYSCFG_IsActiveFlag_TIM1_CC
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_TIM1_CC(void)
+{
+ return (READ_BIT(SYSCFG->IT_LINE_SR[14], SYSCFG_ITLINE14_SR_TIM1_CC) == (SYSCFG_ITLINE14_SR_TIM1_CC));
+}
+#endif /* SYSCFG_ITLINE14_SR_TIM1_CC */
+
+#if defined(SYSCFG_ITLINE15_SR_TIM2_GLB)
+/**
+ * @brief Check if Timer 2 interrupt occurred or not.
+ * @rmtoll SYSCFG_ITLINE15 SR_TIM2_GLB LL_SYSCFG_IsActiveFlag_TIM2
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_TIM2(void)
+{
+ return (READ_BIT(SYSCFG->IT_LINE_SR[15], SYSCFG_ITLINE15_SR_TIM2_GLB) == (SYSCFG_ITLINE15_SR_TIM2_GLB));
+}
+#endif /* SYSCFG_ITLINE15_SR_TIM2_GLB */
+
+#if defined(SYSCFG_ITLINE16_SR_TIM3_GLB)
+/**
+ * @brief Check if Timer 3 interrupt occurred or not.
+ * @rmtoll SYSCFG_ITLINE16 SR_TIM3_GLB LL_SYSCFG_IsActiveFlag_TIM3
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_TIM3(void)
+{
+ return (READ_BIT(SYSCFG->IT_LINE_SR[16], SYSCFG_ITLINE16_SR_TIM3_GLB) == (SYSCFG_ITLINE16_SR_TIM3_GLB));
+}
+#endif /* SYSCFG_ITLINE16_SR_TIM3_GLB */
+
+#if defined(SYSCFG_ITLINE17_SR_DAC)
+/**
+ * @brief Check if DAC underrun interrupt occurred or not.
+ * @rmtoll SYSCFG_ITLINE17 SR_DAC LL_SYSCFG_IsActiveFlag_DAC
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_DAC(void)
+{
+ return (READ_BIT(SYSCFG->IT_LINE_SR[17], SYSCFG_ITLINE17_SR_DAC) == (SYSCFG_ITLINE17_SR_DAC));
+}
+#endif /* SYSCFG_ITLINE17_SR_DAC */
+
+#if defined(SYSCFG_ITLINE17_SR_TIM6_GLB)
+/**
+ * @brief Check if Timer 6 interrupt occurred or not.
+ * @rmtoll SYSCFG_ITLINE17 SR_TIM6_GLB LL_SYSCFG_IsActiveFlag_TIM6
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_TIM6(void)
+{
+ return (READ_BIT(SYSCFG->IT_LINE_SR[17], SYSCFG_ITLINE17_SR_TIM6_GLB) == (SYSCFG_ITLINE17_SR_TIM6_GLB));
+}
+#endif /* SYSCFG_ITLINE17_SR_TIM6_GLB */
+
+#if defined(SYSCFG_ITLINE18_SR_TIM7_GLB)
+/**
+ * @brief Check if Timer 7 interrupt occurred or not.
+ * @rmtoll SYSCFG_ITLINE18 SR_TIM7_GLB LL_SYSCFG_IsActiveFlag_TIM7
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_TIM7(void)
+{
+ return (READ_BIT(SYSCFG->IT_LINE_SR[18], SYSCFG_ITLINE18_SR_TIM7_GLB) == (SYSCFG_ITLINE18_SR_TIM7_GLB));
+}
+#endif /* SYSCFG_ITLINE18_SR_TIM7_GLB */
+
+#if defined(SYSCFG_ITLINE19_SR_TIM14_GLB)
+/**
+ * @brief Check if Timer 14 interrupt occurred or not.
+ * @rmtoll SYSCFG_ITLINE19 SR_TIM14_GLB LL_SYSCFG_IsActiveFlag_TIM14
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_TIM14(void)
+{
+ return (READ_BIT(SYSCFG->IT_LINE_SR[19], SYSCFG_ITLINE19_SR_TIM14_GLB) == (SYSCFG_ITLINE19_SR_TIM14_GLB));
+}
+#endif /* SYSCFG_ITLINE19_SR_TIM14_GLB */
+
+#if defined(SYSCFG_ITLINE20_SR_TIM15_GLB)
+/**
+ * @brief Check if Timer 15 interrupt occurred or not.
+ * @rmtoll SYSCFG_ITLINE20 SR_TIM15_GLB LL_SYSCFG_IsActiveFlag_TIM15
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_TIM15(void)
+{
+ return (READ_BIT(SYSCFG->IT_LINE_SR[20], SYSCFG_ITLINE20_SR_TIM15_GLB) == (SYSCFG_ITLINE20_SR_TIM15_GLB));
+}
+#endif /* SYSCFG_ITLINE20_SR_TIM15_GLB */
+
+#if defined(SYSCFG_ITLINE21_SR_TIM16_GLB)
+/**
+ * @brief Check if Timer 16 interrupt occurred or not.
+ * @rmtoll SYSCFG_ITLINE21 SR_TIM16_GLB LL_SYSCFG_IsActiveFlag_TIM16
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_TIM16(void)
+{
+ return (READ_BIT(SYSCFG->IT_LINE_SR[21], SYSCFG_ITLINE21_SR_TIM16_GLB) == (SYSCFG_ITLINE21_SR_TIM16_GLB));
+}
+#endif /* SYSCFG_ITLINE21_SR_TIM16_GLB */
+
+#if defined(SYSCFG_ITLINE22_SR_TIM17_GLB)
+/**
+ * @brief Check if Timer 17 interrupt occurred or not.
+ * @rmtoll SYSCFG_ITLINE22 SR_TIM17_GLB LL_SYSCFG_IsActiveFlag_TIM17
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_TIM17(void)
+{
+ return (READ_BIT(SYSCFG->IT_LINE_SR[22], SYSCFG_ITLINE22_SR_TIM17_GLB) == (SYSCFG_ITLINE22_SR_TIM17_GLB));
+}
+#endif /* SYSCFG_ITLINE22_SR_TIM17_GLB */
+
+#if defined(SYSCFG_ITLINE23_SR_I2C1_GLB)
+/**
+ * @brief Check if I2C1 interrupt occurred or not, combined with EXTI line 23.
+ * @rmtoll SYSCFG_ITLINE23 SR_I2C1_GLB LL_SYSCFG_IsActiveFlag_I2C1
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_I2C1(void)
+{
+ return (READ_BIT(SYSCFG->IT_LINE_SR[23], SYSCFG_ITLINE23_SR_I2C1_GLB) == (SYSCFG_ITLINE23_SR_I2C1_GLB));
+}
+#endif /* SYSCFG_ITLINE23_SR_I2C1_GLB */
+
+#if defined(SYSCFG_ITLINE24_SR_I2C2_GLB)
+/**
+ * @brief Check if I2C2 interrupt occurred or not.
+ * @rmtoll SYSCFG_ITLINE24 SR_I2C2_GLB LL_SYSCFG_IsActiveFlag_I2C2
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_I2C2(void)
+{
+ return (READ_BIT(SYSCFG->IT_LINE_SR[24], SYSCFG_ITLINE24_SR_I2C2_GLB) == (SYSCFG_ITLINE24_SR_I2C2_GLB));
+}
+#endif /* SYSCFG_ITLINE24_SR_I2C2_GLB */
+
+#if defined(SYSCFG_ITLINE25_SR_SPI1)
+/**
+ * @brief Check if SPI1 interrupt occurred or not.
+ * @rmtoll SYSCFG_ITLINE25 SR_SPI1 LL_SYSCFG_IsActiveFlag_SPI1
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_SPI1(void)
+{
+ return (READ_BIT(SYSCFG->IT_LINE_SR[25], SYSCFG_ITLINE25_SR_SPI1) == (SYSCFG_ITLINE25_SR_SPI1));
+}
+#endif /* SYSCFG_ITLINE25_SR_SPI1 */
+
+#if defined(SYSCFG_ITLINE26_SR_SPI2)
+/**
+ * @brief Check if SPI2 interrupt occurred or not.
+ * @rmtoll SYSCFG_ITLINE26 SR_SPI2 LL_SYSCFG_IsActiveFlag_SPI2
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_SPI2(void)
+{
+ return (READ_BIT(SYSCFG->IT_LINE_SR[26], SYSCFG_ITLINE26_SR_SPI2) == (SYSCFG_ITLINE26_SR_SPI2));
+}
+#endif /* SYSCFG_ITLINE26_SR_SPI2 */
+
+#if defined(SYSCFG_ITLINE27_SR_USART1_GLB)
+/**
+ * @brief Check if USART1 interrupt occurred or not, combined with EXTI line 25.
+ * @rmtoll SYSCFG_ITLINE27 SR_USART1_GLB LL_SYSCFG_IsActiveFlag_USART1
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_USART1(void)
+{
+ return (READ_BIT(SYSCFG->IT_LINE_SR[27], SYSCFG_ITLINE27_SR_USART1_GLB) == (SYSCFG_ITLINE27_SR_USART1_GLB));
+}
+#endif /* SYSCFG_ITLINE27_SR_USART1_GLB */
+
+#if defined(SYSCFG_ITLINE28_SR_USART2_GLB)
+/**
+ * @brief Check if USART2 interrupt occurred or not, combined with EXTI line 26.
+ * @rmtoll SYSCFG_ITLINE28 SR_USART2_GLB LL_SYSCFG_IsActiveFlag_USART2
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_USART2(void)
+{
+ return (READ_BIT(SYSCFG->IT_LINE_SR[28], SYSCFG_ITLINE28_SR_USART2_GLB) == (SYSCFG_ITLINE28_SR_USART2_GLB));
+}
+#endif /* SYSCFG_ITLINE28_SR_USART2_GLB */
+
+#if defined(SYSCFG_ITLINE29_SR_USART3_GLB)
+/**
+ * @brief Check if USART3 interrupt occurred or not, combined with EXTI line 28.
+ * @rmtoll SYSCFG_ITLINE29 SR_USART3_GLB LL_SYSCFG_IsActiveFlag_USART3
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_USART3(void)
+{
+ return (READ_BIT(SYSCFG->IT_LINE_SR[29], SYSCFG_ITLINE29_SR_USART3_GLB) == (SYSCFG_ITLINE29_SR_USART3_GLB));
+}
+#endif /* SYSCFG_ITLINE29_SR_USART3_GLB */
+
+#if defined(SYSCFG_ITLINE29_SR_USART4_GLB)
+/**
+ * @brief Check if USART4 interrupt occurred or not.
+ * @rmtoll SYSCFG_ITLINE29 SR_USART4_GLB LL_SYSCFG_IsActiveFlag_USART4
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_USART4(void)
+{
+ return (READ_BIT(SYSCFG->IT_LINE_SR[29], SYSCFG_ITLINE29_SR_USART4_GLB) == (SYSCFG_ITLINE29_SR_USART4_GLB));
+}
+#endif /* SYSCFG_ITLINE29_SR_USART4_GLB */
+
+#if defined(SYSCFG_ITLINE29_SR_USART5_GLB)
+/**
+ * @brief Check if USART5 interrupt occurred or not.
+ * @rmtoll SYSCFG_ITLINE29 SR_USART5_GLB LL_SYSCFG_IsActiveFlag_USART5
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_USART5(void)
+{
+ return (READ_BIT(SYSCFG->IT_LINE_SR[29], SYSCFG_ITLINE29_SR_USART5_GLB) == (SYSCFG_ITLINE29_SR_USART5_GLB));
+}
+#endif /* SYSCFG_ITLINE29_SR_USART5_GLB */
+
+#if defined(SYSCFG_ITLINE29_SR_USART6_GLB)
+/**
+ * @brief Check if USART6 interrupt occurred or not.
+ * @rmtoll SYSCFG_ITLINE29 SR_USART6_GLB LL_SYSCFG_IsActiveFlag_USART6
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_USART6(void)
+{
+ return (READ_BIT(SYSCFG->IT_LINE_SR[29], SYSCFG_ITLINE29_SR_USART6_GLB) == (SYSCFG_ITLINE29_SR_USART6_GLB));
+}
+#endif /* SYSCFG_ITLINE29_SR_USART6_GLB */
+
+#if defined(SYSCFG_ITLINE29_SR_USART7_GLB)
+/**
+ * @brief Check if USART7 interrupt occurred or not.
+ * @rmtoll SYSCFG_ITLINE29 SR_USART7_GLB LL_SYSCFG_IsActiveFlag_USART7
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_USART7(void)
+{
+ return (READ_BIT(SYSCFG->IT_LINE_SR[29], SYSCFG_ITLINE29_SR_USART7_GLB) == (SYSCFG_ITLINE29_SR_USART7_GLB));
+}
+#endif /* SYSCFG_ITLINE29_SR_USART7_GLB */
+
+#if defined(SYSCFG_ITLINE29_SR_USART8_GLB)
+/**
+ * @brief Check if USART8 interrupt occurred or not.
+ * @rmtoll SYSCFG_ITLINE29 SR_USART8_GLB LL_SYSCFG_IsActiveFlag_USART8
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_USART8(void)
+{
+ return (READ_BIT(SYSCFG->IT_LINE_SR[29], SYSCFG_ITLINE29_SR_USART8_GLB) == (SYSCFG_ITLINE29_SR_USART8_GLB));
+}
+#endif /* SYSCFG_ITLINE29_SR_USART8_GLB */
+
+#if defined(SYSCFG_ITLINE30_SR_CAN)
+/**
+ * @brief Check if CAN interrupt occurred or not.
+ * @rmtoll SYSCFG_ITLINE30 SR_CAN LL_SYSCFG_IsActiveFlag_CAN
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_CAN(void)
+{
+ return (READ_BIT(SYSCFG->IT_LINE_SR[30], SYSCFG_ITLINE30_SR_CAN) == (SYSCFG_ITLINE30_SR_CAN));
+}
+#endif /* SYSCFG_ITLINE30_SR_CAN */
+
+#if defined(SYSCFG_ITLINE30_SR_CEC)
+/**
+ * @brief Check if CEC interrupt occurred or not, combined with EXTI line 27.
+ * @rmtoll SYSCFG_ITLINE30 SR_CEC LL_SYSCFG_IsActiveFlag_CEC
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_CEC(void)
+{
+ return (READ_BIT(SYSCFG->IT_LINE_SR[30], SYSCFG_ITLINE30_SR_CEC) == (SYSCFG_ITLINE30_SR_CEC));
+}
+#endif /* SYSCFG_ITLINE30_SR_CEC */
+
+/**
+ * @brief Set connections to TIMx Break inputs
+ * @rmtoll SYSCFG_CFGR2 LOCKUP_LOCK LL_SYSCFG_SetTIMBreakInputs\n
+ * SYSCFG_CFGR2 SRAM_PARITY_LOCK LL_SYSCFG_SetTIMBreakInputs\n
+ * SYSCFG_CFGR2 PVD_LOCK LL_SYSCFG_SetTIMBreakInputs
+ * @param Break This parameter can be a combination of the following values:
+ * @arg @ref LL_SYSCFG_TIMBREAK_PVD (*)
+ * @arg @ref LL_SYSCFG_TIMBREAK_SRAM_PARITY
+ * @arg @ref LL_SYSCFG_TIMBREAK_LOCKUP
+ *
+ * (*) value not defined in all devices
+ * @retval None
+ */
+__STATIC_INLINE void LL_SYSCFG_SetTIMBreakInputs(uint32_t Break)
+{
+#if defined(SYSCFG_CFGR2_PVD_LOCK)
+ MODIFY_REG(SYSCFG->CFGR2, SYSCFG_CFGR2_LOCKUP_LOCK | SYSCFG_CFGR2_SRAM_PARITY_LOCK | SYSCFG_CFGR2_PVD_LOCK, Break);
+#else
+ MODIFY_REG(SYSCFG->CFGR2, SYSCFG_CFGR2_LOCKUP_LOCK | SYSCFG_CFGR2_SRAM_PARITY_LOCK, Break);
+#endif /*SYSCFG_CFGR2_PVD_LOCK*/
+}
+
+/**
+ * @brief Get connections to TIMx Break inputs
+ * @rmtoll SYSCFG_CFGR2 LOCKUP_LOCK LL_SYSCFG_GetTIMBreakInputs\n
+ * SYSCFG_CFGR2 SRAM_PARITY_LOCK LL_SYSCFG_GetTIMBreakInputs\n
+ * SYSCFG_CFGR2 PVD_LOCK LL_SYSCFG_GetTIMBreakInputs
+ * @retval Returned value can be can be a combination of the following values:
+ * @arg @ref LL_SYSCFG_TIMBREAK_PVD (*)
+ * @arg @ref LL_SYSCFG_TIMBREAK_SRAM_PARITY
+ * @arg @ref LL_SYSCFG_TIMBREAK_LOCKUP
+ *
+ * (*) value not defined in all devices
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_GetTIMBreakInputs(void)
+{
+#if defined(SYSCFG_CFGR2_PVD_LOCK)
+ return (uint32_t)(READ_BIT(SYSCFG->CFGR2,
+ SYSCFG_CFGR2_LOCKUP_LOCK | SYSCFG_CFGR2_SRAM_PARITY_LOCK | SYSCFG_CFGR2_PVD_LOCK));
+#else
+ return (uint32_t)(READ_BIT(SYSCFG->CFGR2, SYSCFG_CFGR2_LOCKUP_LOCK | SYSCFG_CFGR2_SRAM_PARITY_LOCK));
+#endif /*SYSCFG_CFGR2_PVD_LOCK*/
+}
+
+/**
+ * @brief Check if SRAM parity error detected
+ * @rmtoll SYSCFG_CFGR2 SRAM_PEF LL_SYSCFG_IsActiveFlag_SP
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_SP(void)
+{
+ return (READ_BIT(SYSCFG->CFGR2, SYSCFG_CFGR2_SRAM_PEF) == (SYSCFG_CFGR2_SRAM_PEF));
+}
+
+/**
+ * @brief Clear SRAM parity error flag
+ * @rmtoll SYSCFG_CFGR2 SRAM_PEF LL_SYSCFG_ClearFlag_SP
+ * @retval None
+ */
+__STATIC_INLINE void LL_SYSCFG_ClearFlag_SP(void)
+{
+ SET_BIT(SYSCFG->CFGR2, SYSCFG_CFGR2_SRAM_PEF);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup SYSTEM_LL_EF_DBGMCU DBGMCU
+ * @{
+ */
+
+/**
+ * @brief Return the device identifier
+ * @note For STM32F03x devices, the device ID is 0x444
+ * @note For STM32F04x devices, the device ID is 0x445.
+ * @note For STM32F05x devices, the device ID is 0x440
+ * @note For STM32F07x devices, the device ID is 0x448
+ * @note For STM32F09x devices, the device ID is 0x442
+ * @rmtoll DBGMCU_IDCODE DEV_ID LL_DBGMCU_GetDeviceID
+ * @retval Values between Min_Data=0x00 and Max_Data=0xFFF
+ */
+__STATIC_INLINE uint32_t LL_DBGMCU_GetDeviceID(void)
+{
+ return (uint32_t)(READ_BIT(DBGMCU->IDCODE, DBGMCU_IDCODE_DEV_ID));
+}
+
+/**
+ * @brief Return the device revision identifier
+ * @note This field indicates the revision of the device.
+ For example, it is read as 0x1000 for Revision 1.0.
+ * @rmtoll DBGMCU_IDCODE REV_ID LL_DBGMCU_GetRevisionID
+ * @retval Values between Min_Data=0x00 and Max_Data=0xFFFF
+ */
+__STATIC_INLINE uint32_t LL_DBGMCU_GetRevisionID(void)
+{
+ return (uint32_t)(READ_BIT(DBGMCU->IDCODE, DBGMCU_IDCODE_REV_ID) >> DBGMCU_IDCODE_REV_ID_Pos);
+}
+
+/**
+ * @brief Enable the Debug Module during STOP mode
+ * @rmtoll DBGMCU_CR DBG_STOP LL_DBGMCU_EnableDBGStopMode
+ * @retval None
+ */
+__STATIC_INLINE void LL_DBGMCU_EnableDBGStopMode(void)
+{
+ SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP);
+}
+
+/**
+ * @brief Disable the Debug Module during STOP mode
+ * @rmtoll DBGMCU_CR DBG_STOP LL_DBGMCU_DisableDBGStopMode
+ * @retval None
+ */
+__STATIC_INLINE void LL_DBGMCU_DisableDBGStopMode(void)
+{
+ CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP);
+}
+
+/**
+ * @brief Enable the Debug Module during STANDBY mode
+ * @rmtoll DBGMCU_CR DBG_STANDBY LL_DBGMCU_EnableDBGStandbyMode
+ * @retval None
+ */
+__STATIC_INLINE void LL_DBGMCU_EnableDBGStandbyMode(void)
+{
+ SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY);
+}
+
+/**
+ * @brief Disable the Debug Module during STANDBY mode
+ * @rmtoll DBGMCU_CR DBG_STANDBY LL_DBGMCU_DisableDBGStandbyMode
+ * @retval None
+ */
+__STATIC_INLINE void LL_DBGMCU_DisableDBGStandbyMode(void)
+{
+ CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY);
+}
+
+/**
+ * @brief Freeze APB1 peripherals (group1 peripherals)
+ * @rmtoll DBGMCU_APB1FZ DBG_TIM2_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
+ * DBGMCU_APB1FZ DBG_TIM3_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
+ * DBGMCU_APB1FZ DBG_TIM6_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
+ * DBGMCU_APB1FZ DBG_TIM7_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
+ * DBGMCU_APB1FZ DBG_TIM14_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
+ * DBGMCU_APB1FZ DBG_RTC_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
+ * DBGMCU_APB1FZ DBG_WWDG_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
+ * DBGMCU_APB1FZ DBG_IWDG_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
+ * DBGMCU_APB1FZ DBG_I2C1_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_FreezePeriph\n
+ * DBGMCU_APB1FZ DBG_CAN_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_DBGMCU_APB1_GRP1_TIM2_STOP (*)
+ * @arg @ref LL_DBGMCU_APB1_GRP1_TIM3_STOP
+ * @arg @ref LL_DBGMCU_APB1_GRP1_TIM6_STOP (*)
+ * @arg @ref LL_DBGMCU_APB1_GRP1_TIM7_STOP (*)
+ * @arg @ref LL_DBGMCU_APB1_GRP1_TIM14_STOP
+ * @arg @ref LL_DBGMCU_APB1_GRP1_RTC_STOP
+ * @arg @ref LL_DBGMCU_APB1_GRP1_WWDG_STOP
+ * @arg @ref LL_DBGMCU_APB1_GRP1_IWDG_STOP
+ * @arg @ref LL_DBGMCU_APB1_GRP1_I2C1_STOP
+ * @arg @ref LL_DBGMCU_APB1_GRP1_CAN_STOP (*)
+ *
+ * (*) value not defined in all devices
+ * @retval None
+ */
+__STATIC_INLINE void LL_DBGMCU_APB1_GRP1_FreezePeriph(uint32_t Periphs)
+{
+ SET_BIT(DBGMCU->APB1FZ, Periphs);
+}
+
+/**
+ * @brief Unfreeze APB1 peripherals (group1 peripherals)
+ * @rmtoll DBGMCU_APB1FZ DBG_TIM2_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
+ * DBGMCU_APB1FZ DBG_TIM3_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
+ * DBGMCU_APB1FZ DBG_TIM6_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
+ * DBGMCU_APB1FZ DBG_TIM7_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
+ * DBGMCU_APB1FZ DBG_TIM14_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
+ * DBGMCU_APB1FZ DBG_RTC_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
+ * DBGMCU_APB1FZ DBG_WWDG_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
+ * DBGMCU_APB1FZ DBG_IWDG_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
+ * DBGMCU_APB1FZ DBG_I2C1_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
+ * DBGMCU_APB1FZ DBG_CAN_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_DBGMCU_APB1_GRP1_TIM2_STOP (*)
+ * @arg @ref LL_DBGMCU_APB1_GRP1_TIM3_STOP
+ * @arg @ref LL_DBGMCU_APB1_GRP1_TIM6_STOP (*)
+ * @arg @ref LL_DBGMCU_APB1_GRP1_TIM7_STOP (*)
+ * @arg @ref LL_DBGMCU_APB1_GRP1_TIM14_STOP
+ * @arg @ref LL_DBGMCU_APB1_GRP1_RTC_STOP
+ * @arg @ref LL_DBGMCU_APB1_GRP1_WWDG_STOP
+ * @arg @ref LL_DBGMCU_APB1_GRP1_IWDG_STOP
+ * @arg @ref LL_DBGMCU_APB1_GRP1_I2C1_STOP
+ * @arg @ref LL_DBGMCU_APB1_GRP1_CAN_STOP (*)
+ *
+ * (*) value not defined in all devices
+ * @retval None
+ */
+__STATIC_INLINE void LL_DBGMCU_APB1_GRP1_UnFreezePeriph(uint32_t Periphs)
+{
+ CLEAR_BIT(DBGMCU->APB1FZ, Periphs);
+}
+
+/**
+ * @brief Freeze APB1 peripherals (group2 peripherals)
+ * @rmtoll DBGMCU_APB2FZ DBG_TIM1_STOP LL_DBGMCU_APB1_GRP2_FreezePeriph\n
+ * DBGMCU_APB2FZ DBG_TIM15_STOP LL_DBGMCU_APB1_GRP2_FreezePeriph\n
+ * DBGMCU_APB2FZ DBG_TIM16_STOP LL_DBGMCU_APB1_GRP2_FreezePeriph\n
+ * DBGMCU_APB2FZ DBG_TIM17_STOP LL_DBGMCU_APB1_GRP2_FreezePeriph
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_DBGMCU_APB1_GRP2_TIM1_STOP
+ * @arg @ref LL_DBGMCU_APB1_GRP2_TIM15_STOP (*)
+ * @arg @ref LL_DBGMCU_APB1_GRP2_TIM16_STOP
+ * @arg @ref LL_DBGMCU_APB1_GRP2_TIM17_STOP
+ *
+ * (*) value not defined in all devices
+ * @retval None
+ */
+__STATIC_INLINE void LL_DBGMCU_APB1_GRP2_FreezePeriph(uint32_t Periphs)
+{
+ SET_BIT(DBGMCU->APB2FZ, Periphs);
+}
+
+/**
+ * @brief Unfreeze APB1 peripherals (group2 peripherals)
+ * @rmtoll DBGMCU_APB2FZ DBG_TIM1_STOP LL_DBGMCU_APB1_GRP2_UnFreezePeriph\n
+ * DBGMCU_APB2FZ DBG_TIM15_STOP LL_DBGMCU_APB1_GRP2_UnFreezePeriph\n
+ * DBGMCU_APB2FZ DBG_TIM16_STOP LL_DBGMCU_APB1_GRP2_UnFreezePeriph\n
+ * DBGMCU_APB2FZ DBG_TIM17_STOP LL_DBGMCU_APB1_GRP2_UnFreezePeriph
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_DBGMCU_APB1_GRP2_TIM1_STOP
+ * @arg @ref LL_DBGMCU_APB1_GRP2_TIM15_STOP (*)
+ * @arg @ref LL_DBGMCU_APB1_GRP2_TIM16_STOP
+ * @arg @ref LL_DBGMCU_APB1_GRP2_TIM17_STOP
+ *
+ * (*) value not defined in all devices
+ * @retval None
+ */
+__STATIC_INLINE void LL_DBGMCU_APB1_GRP2_UnFreezePeriph(uint32_t Periphs)
+{
+ CLEAR_BIT(DBGMCU->APB2FZ, Periphs);
+}
+/**
+ * @}
+ */
+
+/** @defgroup SYSTEM_LL_EF_FLASH FLASH
+ * @{
+ */
+
+/**
+ * @brief Set FLASH Latency
+ * @rmtoll FLASH_ACR LATENCY LL_FLASH_SetLatency
+ * @param Latency This parameter can be one of the following values:
+ * @arg @ref LL_FLASH_LATENCY_0
+ * @arg @ref LL_FLASH_LATENCY_1
+ * @retval None
+ */
+__STATIC_INLINE void LL_FLASH_SetLatency(uint32_t Latency)
+{
+ MODIFY_REG(FLASH->ACR, FLASH_ACR_LATENCY, Latency);
+}
+
+/**
+ * @brief Get FLASH Latency
+ * @rmtoll FLASH_ACR LATENCY LL_FLASH_GetLatency
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_FLASH_LATENCY_0
+ * @arg @ref LL_FLASH_LATENCY_1
+ */
+__STATIC_INLINE uint32_t LL_FLASH_GetLatency(void)
+{
+ return (uint32_t)(READ_BIT(FLASH->ACR, FLASH_ACR_LATENCY));
+}
+
+/**
+ * @brief Enable Prefetch
+ * @rmtoll FLASH_ACR PRFTBE LL_FLASH_EnablePrefetch
+ * @retval None
+ */
+__STATIC_INLINE void LL_FLASH_EnablePrefetch(void)
+{
+ SET_BIT(FLASH->ACR, FLASH_ACR_PRFTBE);
+}
+
+/**
+ * @brief Disable Prefetch
+ * @rmtoll FLASH_ACR PRFTBE LL_FLASH_DisablePrefetch
+ * @retval None
+ */
+__STATIC_INLINE void LL_FLASH_DisablePrefetch(void)
+{
+ CLEAR_BIT(FLASH->ACR, FLASH_ACR_PRFTBE);
+}
+
+/**
+ * @brief Check if Prefetch buffer is enabled
+ * @rmtoll FLASH_ACR PRFTBS LL_FLASH_IsPrefetchEnabled
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_FLASH_IsPrefetchEnabled(void)
+{
+ return (READ_BIT(FLASH->ACR, FLASH_ACR_PRFTBS) == (FLASH_ACR_PRFTBS));
+}
+
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* defined (FLASH) || defined (SYSCFG) || defined (DBGMCU) */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_LL_SYSTEM_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_tim.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_tim.h
new file mode 100644
index 0000000..c5f8653
--- /dev/null
+++ b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_tim.h
@@ -0,0 +1,3942 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_ll_tim.h
+ * @author MCD Application Team
+ * @brief Header file of TIM LL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_LL_TIM_H
+#define __STM32F0xx_LL_TIM_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx.h"
+
+/** @addtogroup STM32F0xx_LL_Driver
+ * @{
+ */
+
+#if defined (TIM1) || defined (TIM2) || defined (TIM3) || defined (TIM14) || defined (TIM15) || defined (TIM16) || defined (TIM17) || defined (TIM6) || defined (TIM7)
+
+/** @defgroup TIM_LL TIM
+ * @{
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup TIM_LL_Private_Variables TIM Private Variables
+ * @{
+ */
+static const uint8_t OFFSET_TAB_CCMRx[] =
+{
+ 0x00U, /* 0: TIMx_CH1 */
+ 0x00U, /* 1: TIMx_CH1N */
+ 0x00U, /* 2: TIMx_CH2 */
+ 0x00U, /* 3: TIMx_CH2N */
+ 0x04U, /* 4: TIMx_CH3 */
+ 0x04U, /* 5: TIMx_CH3N */
+ 0x04U /* 6: TIMx_CH4 */
+};
+
+static const uint8_t SHIFT_TAB_OCxx[] =
+{
+ 0U, /* 0: OC1M, OC1FE, OC1PE */
+ 0U, /* 1: - NA */
+ 8U, /* 2: OC2M, OC2FE, OC2PE */
+ 0U, /* 3: - NA */
+ 0U, /* 4: OC3M, OC3FE, OC3PE */
+ 0U, /* 5: - NA */
+ 8U /* 6: OC4M, OC4FE, OC4PE */
+};
+
+static const uint8_t SHIFT_TAB_ICxx[] =
+{
+ 0U, /* 0: CC1S, IC1PSC, IC1F */
+ 0U, /* 1: - NA */
+ 8U, /* 2: CC2S, IC2PSC, IC2F */
+ 0U, /* 3: - NA */
+ 0U, /* 4: CC3S, IC3PSC, IC3F */
+ 0U, /* 5: - NA */
+ 8U /* 6: CC4S, IC4PSC, IC4F */
+};
+
+static const uint8_t SHIFT_TAB_CCxP[] =
+{
+ 0U, /* 0: CC1P */
+ 2U, /* 1: CC1NP */
+ 4U, /* 2: CC2P */
+ 6U, /* 3: CC2NP */
+ 8U, /* 4: CC3P */
+ 10U, /* 5: CC3NP */
+ 12U /* 6: CC4P */
+};
+
+static const uint8_t SHIFT_TAB_OISx[] =
+{
+ 0U, /* 0: OIS1 */
+ 1U, /* 1: OIS1N */
+ 2U, /* 2: OIS2 */
+ 3U, /* 3: OIS2N */
+ 4U, /* 4: OIS3 */
+ 5U, /* 5: OIS3N */
+ 6U /* 6: OIS4 */
+};
+/**
+ * @}
+ */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup TIM_LL_Private_Constants TIM Private Constants
+ * @{
+ */
+
+
+#define TIMx_OR_RMP_SHIFT 16U
+#define TIMx_OR_RMP_MASK 0x0000FFFFU
+#define TIM14_OR_RMP_MASK (TIM14_OR_TI1_RMP << TIMx_OR_RMP_SHIFT)
+
+/* Mask used to set the TDG[x:0] of the DTG bits of the TIMx_BDTR register */
+#define DT_DELAY_1 ((uint8_t)0x7F)
+#define DT_DELAY_2 ((uint8_t)0x3F)
+#define DT_DELAY_3 ((uint8_t)0x1F)
+#define DT_DELAY_4 ((uint8_t)0x1F)
+
+/* Mask used to set the DTG[7:5] bits of the DTG bits of the TIMx_BDTR register */
+#define DT_RANGE_1 ((uint8_t)0x00)
+#define DT_RANGE_2 ((uint8_t)0x80)
+#define DT_RANGE_3 ((uint8_t)0xC0)
+#define DT_RANGE_4 ((uint8_t)0xE0)
+
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup TIM_LL_Private_Macros TIM Private Macros
+ * @{
+ */
+/** @brief Convert channel id into channel index.
+ * @param __CHANNEL__ This parameter can be one of the following values:
+ * @arg @ref LL_TIM_CHANNEL_CH1
+ * @arg @ref LL_TIM_CHANNEL_CH1N
+ * @arg @ref LL_TIM_CHANNEL_CH2
+ * @arg @ref LL_TIM_CHANNEL_CH2N
+ * @arg @ref LL_TIM_CHANNEL_CH3
+ * @arg @ref LL_TIM_CHANNEL_CH3N
+ * @arg @ref LL_TIM_CHANNEL_CH4
+ * @retval none
+ */
+#define TIM_GET_CHANNEL_INDEX( __CHANNEL__) \
+ (((__CHANNEL__) == LL_TIM_CHANNEL_CH1) ? 0U :\
+ ((__CHANNEL__) == LL_TIM_CHANNEL_CH1N) ? 1U :\
+ ((__CHANNEL__) == LL_TIM_CHANNEL_CH2) ? 2U :\
+ ((__CHANNEL__) == LL_TIM_CHANNEL_CH2N) ? 3U :\
+ ((__CHANNEL__) == LL_TIM_CHANNEL_CH3) ? 4U :\
+ ((__CHANNEL__) == LL_TIM_CHANNEL_CH3N) ? 5U : 6U)
+
+/** @brief Calculate the deadtime sampling period(in ps).
+ * @param __TIMCLK__ timer input clock frequency (in Hz).
+ * @param __CKD__ This parameter can be one of the following values:
+ * @arg @ref LL_TIM_CLOCKDIVISION_DIV1
+ * @arg @ref LL_TIM_CLOCKDIVISION_DIV2
+ * @arg @ref LL_TIM_CLOCKDIVISION_DIV4
+ * @retval none
+ */
+#define TIM_CALC_DTS(__TIMCLK__, __CKD__) \
+ (((__CKD__) == LL_TIM_CLOCKDIVISION_DIV1) ? ((uint64_t)1000000000000U/(__TIMCLK__)) : \
+ ((__CKD__) == LL_TIM_CLOCKDIVISION_DIV2) ? ((uint64_t)1000000000000U/((__TIMCLK__) >> 1U)) : \
+ ((uint64_t)1000000000000U/((__TIMCLK__) >> 2U)))
+/**
+ * @}
+ */
+
+
+/* Exported types ------------------------------------------------------------*/
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup TIM_LL_ES_INIT TIM Exported Init structure
+ * @{
+ */
+
+/**
+ * @brief TIM Time Base configuration structure definition.
+ */
+typedef struct
+{
+ uint16_t Prescaler; /*!< Specifies the prescaler value used to divide the TIM clock.
+ This parameter can be a number between Min_Data=0x0000 and Max_Data=0xFFFF.
+
+ This feature can be modified afterwards using unitary function @ref LL_TIM_SetPrescaler().*/
+
+ uint32_t CounterMode; /*!< Specifies the counter mode.
+ This parameter can be a value of @ref TIM_LL_EC_COUNTERMODE.
+
+ This feature can be modified afterwards using unitary function @ref LL_TIM_SetCounterMode().*/
+
+ uint32_t Autoreload; /*!< Specifies the auto reload value to be loaded into the active
+ Auto-Reload Register at the next update event.
+ This parameter must be a number between Min_Data=0x0000 and Max_Data=0xFFFF.
+ Some timer instances may support 32 bits counters. In that case this parameter must be a number between 0x0000 and 0xFFFFFFFF.
+
+ This feature can be modified afterwards using unitary function @ref LL_TIM_SetAutoReload().*/
+
+ uint32_t ClockDivision; /*!< Specifies the clock division.
+ This parameter can be a value of @ref TIM_LL_EC_CLOCKDIVISION.
+
+ This feature can be modified afterwards using unitary function @ref LL_TIM_SetClockDivision().*/
+
+ uint8_t RepetitionCounter; /*!< Specifies the repetition counter value. Each time the RCR downcounter
+ reaches zero, an update event is generated and counting restarts
+ from the RCR value (N).
+ This means in PWM mode that (N+1) corresponds to:
+ - the number of PWM periods in edge-aligned mode
+ - the number of half PWM period in center-aligned mode
+ This parameter must be a number between 0x00 and 0xFF.
+
+ This feature can be modified afterwards using unitary function @ref LL_TIM_SetRepetitionCounter().*/
+} LL_TIM_InitTypeDef;
+
+/**
+ * @brief TIM Output Compare configuration structure definition.
+ */
+typedef struct
+{
+ uint32_t OCMode; /*!< Specifies the output mode.
+ This parameter can be a value of @ref TIM_LL_EC_OCMODE.
+
+ This feature can be modified afterwards using unitary function @ref LL_TIM_OC_SetMode().*/
+
+ uint32_t OCState; /*!< Specifies the TIM Output Compare state.
+ This parameter can be a value of @ref TIM_LL_EC_OCSTATE.
+
+ This feature can be modified afterwards using unitary functions @ref LL_TIM_CC_EnableChannel() or @ref LL_TIM_CC_DisableChannel().*/
+
+ uint32_t OCNState; /*!< Specifies the TIM complementary Output Compare state.
+ This parameter can be a value of @ref TIM_LL_EC_OCSTATE.
+
+ This feature can be modified afterwards using unitary functions @ref LL_TIM_CC_EnableChannel() or @ref LL_TIM_CC_DisableChannel().*/
+
+ uint32_t CompareValue; /*!< Specifies the Compare value to be loaded into the Capture Compare Register.
+ This parameter can be a number between Min_Data=0x0000 and Max_Data=0xFFFF.
+
+ This feature can be modified afterwards using unitary function LL_TIM_OC_SetCompareCHx (x=1..6).*/
+
+ uint32_t OCPolarity; /*!< Specifies the output polarity.
+ This parameter can be a value of @ref TIM_LL_EC_OCPOLARITY.
+
+ This feature can be modified afterwards using unitary function @ref LL_TIM_OC_SetPolarity().*/
+
+ uint32_t OCNPolarity; /*!< Specifies the complementary output polarity.
+ This parameter can be a value of @ref TIM_LL_EC_OCPOLARITY.
+
+ This feature can be modified afterwards using unitary function @ref LL_TIM_OC_SetPolarity().*/
+
+
+ uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
+ This parameter can be a value of @ref TIM_LL_EC_OCIDLESTATE.
+
+ This feature can be modified afterwards using unitary function @ref LL_TIM_OC_SetIdleState().*/
+
+ uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
+ This parameter can be a value of @ref TIM_LL_EC_OCIDLESTATE.
+
+ This feature can be modified afterwards using unitary function @ref LL_TIM_OC_SetIdleState().*/
+} LL_TIM_OC_InitTypeDef;
+
+/**
+ * @brief TIM Input Capture configuration structure definition.
+ */
+
+typedef struct
+{
+
+ uint32_t ICPolarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_LL_EC_IC_POLARITY.
+
+ This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetPolarity().*/
+
+ uint32_t ICActiveInput; /*!< Specifies the input.
+ This parameter can be a value of @ref TIM_LL_EC_ACTIVEINPUT.
+
+ This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetActiveInput().*/
+
+ uint32_t ICPrescaler; /*!< Specifies the Input Capture Prescaler.
+ This parameter can be a value of @ref TIM_LL_EC_ICPSC.
+
+ This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetPrescaler().*/
+
+ uint32_t ICFilter; /*!< Specifies the input capture filter.
+ This parameter can be a value of @ref TIM_LL_EC_IC_FILTER.
+
+ This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetFilter().*/
+} LL_TIM_IC_InitTypeDef;
+
+
+/**
+ * @brief TIM Encoder interface configuration structure definition.
+ */
+typedef struct
+{
+ uint32_t EncoderMode; /*!< Specifies the encoder resolution (x2 or x4).
+ This parameter can be a value of @ref TIM_LL_EC_ENCODERMODE.
+
+ This feature can be modified afterwards using unitary function @ref LL_TIM_SetEncoderMode().*/
+
+ uint32_t IC1Polarity; /*!< Specifies the active edge of TI1 input.
+ This parameter can be a value of @ref TIM_LL_EC_IC_POLARITY.
+
+ This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetPolarity().*/
+
+ uint32_t IC1ActiveInput; /*!< Specifies the TI1 input source
+ This parameter can be a value of @ref TIM_LL_EC_ACTIVEINPUT.
+
+ This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetActiveInput().*/
+
+ uint32_t IC1Prescaler; /*!< Specifies the TI1 input prescaler value.
+ This parameter can be a value of @ref TIM_LL_EC_ICPSC.
+
+ This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetPrescaler().*/
+
+ uint32_t IC1Filter; /*!< Specifies the TI1 input filter.
+ This parameter can be a value of @ref TIM_LL_EC_IC_FILTER.
+
+ This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetFilter().*/
+
+ uint32_t IC2Polarity; /*!< Specifies the active edge of TI2 input.
+ This parameter can be a value of @ref TIM_LL_EC_IC_POLARITY.
+
+ This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetPolarity().*/
+
+ uint32_t IC2ActiveInput; /*!< Specifies the TI2 input source
+ This parameter can be a value of @ref TIM_LL_EC_ACTIVEINPUT.
+
+ This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetActiveInput().*/
+
+ uint32_t IC2Prescaler; /*!< Specifies the TI2 input prescaler value.
+ This parameter can be a value of @ref TIM_LL_EC_ICPSC.
+
+ This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetPrescaler().*/
+
+ uint32_t IC2Filter; /*!< Specifies the TI2 input filter.
+ This parameter can be a value of @ref TIM_LL_EC_IC_FILTER.
+
+ This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetFilter().*/
+
+} LL_TIM_ENCODER_InitTypeDef;
+
+/**
+ * @brief TIM Hall sensor interface configuration structure definition.
+ */
+typedef struct
+{
+
+ uint32_t IC1Polarity; /*!< Specifies the active edge of TI1 input.
+ This parameter can be a value of @ref TIM_LL_EC_IC_POLARITY.
+
+ This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetPolarity().*/
+
+ uint32_t IC1Prescaler; /*!< Specifies the TI1 input prescaler value.
+ Prescaler must be set to get a maximum counter period longer than the
+ time interval between 2 consecutive changes on the Hall inputs.
+ This parameter can be a value of @ref TIM_LL_EC_ICPSC.
+
+ This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetPrescaler().*/
+
+ uint32_t IC1Filter; /*!< Specifies the TI1 input filter.
+ This parameter can be a value of @ref TIM_LL_EC_IC_FILTER.
+
+ This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetFilter().*/
+
+ uint32_t CommutationDelay; /*!< Specifies the compare value to be loaded into the Capture Compare Register.
+ A positive pulse (TRGO event) is generated with a programmable delay every time
+ a change occurs on the Hall inputs.
+ This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF.
+
+ This feature can be modified afterwards using unitary function @ref LL_TIM_OC_SetCompareCH2().*/
+} LL_TIM_HALLSENSOR_InitTypeDef;
+
+/**
+ * @brief BDTR (Break and Dead Time) structure definition
+ */
+typedef struct
+{
+ uint32_t OSSRState; /*!< Specifies the Off-State selection used in Run mode.
+ This parameter can be a value of @ref TIM_LL_EC_OSSR
+
+ This feature can be modified afterwards using unitary function @ref LL_TIM_SetOffStates()
+
+ @note This bit-field cannot be modified as long as LOCK level 2 has been programmed. */
+
+ uint32_t OSSIState; /*!< Specifies the Off-State used in Idle state.
+ This parameter can be a value of @ref TIM_LL_EC_OSSI
+
+ This feature can be modified afterwards using unitary function @ref LL_TIM_SetOffStates()
+
+ @note This bit-field cannot be modified as long as LOCK level 2 has been programmed. */
+
+ uint32_t LockLevel; /*!< Specifies the LOCK level parameters.
+ This parameter can be a value of @ref TIM_LL_EC_LOCKLEVEL
+
+ @note The LOCK bits can be written only once after the reset. Once the TIMx_BDTR register
+ has been written, their content is frozen until the next reset.*/
+
+ uint8_t DeadTime; /*!< Specifies the delay time between the switching-off and the
+ switching-on of the outputs.
+ This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF.
+
+ This feature can be modified afterwards using unitary function @ref LL_TIM_OC_SetDeadTime()
+
+ @note This bit-field can not be modified as long as LOCK level 1, 2 or 3 has been programmed. */
+
+ uint16_t BreakState; /*!< Specifies whether the TIM Break input is enabled or not.
+ This parameter can be a value of @ref TIM_LL_EC_BREAK_ENABLE
+
+ This feature can be modified afterwards using unitary functions @ref LL_TIM_EnableBRK() or @ref LL_TIM_DisableBRK()
+
+ @note This bit-field can not be modified as long as LOCK level 1 has been programmed. */
+
+ uint32_t BreakPolarity; /*!< Specifies the TIM Break Input pin polarity.
+ This parameter can be a value of @ref TIM_LL_EC_BREAK_POLARITY
+
+ This feature can be modified afterwards using unitary function @ref LL_TIM_ConfigBRK()
+
+ @note This bit-field can not be modified as long as LOCK level 1 has been programmed. */
+
+ uint32_t AutomaticOutput; /*!< Specifies whether the TIM Automatic Output feature is enabled or not.
+ This parameter can be a value of @ref TIM_LL_EC_AUTOMATICOUTPUT_ENABLE
+
+ This feature can be modified afterwards using unitary functions @ref LL_TIM_EnableAutomaticOutput() or @ref LL_TIM_DisableAutomaticOutput()
+
+ @note This bit-field can not be modified as long as LOCK level 1 has been programmed. */
+} LL_TIM_BDTR_InitTypeDef;
+
+/**
+ * @}
+ */
+#endif /* USE_FULL_LL_DRIVER */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup TIM_LL_Exported_Constants TIM Exported Constants
+ * @{
+ */
+
+/** @defgroup TIM_LL_EC_GET_FLAG Get Flags Defines
+ * @brief Flags defines which can be used with LL_TIM_ReadReg function.
+ * @{
+ */
+#define LL_TIM_SR_UIF TIM_SR_UIF /*!< Update interrupt flag */
+#define LL_TIM_SR_CC1IF TIM_SR_CC1IF /*!< Capture/compare 1 interrupt flag */
+#define LL_TIM_SR_CC2IF TIM_SR_CC2IF /*!< Capture/compare 2 interrupt flag */
+#define LL_TIM_SR_CC3IF TIM_SR_CC3IF /*!< Capture/compare 3 interrupt flag */
+#define LL_TIM_SR_CC4IF TIM_SR_CC4IF /*!< Capture/compare 4 interrupt flag */
+#define LL_TIM_SR_COMIF TIM_SR_COMIF /*!< COM interrupt flag */
+#define LL_TIM_SR_TIF TIM_SR_TIF /*!< Trigger interrupt flag */
+#define LL_TIM_SR_BIF TIM_SR_BIF /*!< Break interrupt flag */
+#define LL_TIM_SR_CC1OF TIM_SR_CC1OF /*!< Capture/Compare 1 overcapture flag */
+#define LL_TIM_SR_CC2OF TIM_SR_CC2OF /*!< Capture/Compare 2 overcapture flag */
+#define LL_TIM_SR_CC3OF TIM_SR_CC3OF /*!< Capture/Compare 3 overcapture flag */
+#define LL_TIM_SR_CC4OF TIM_SR_CC4OF /*!< Capture/Compare 4 overcapture flag */
+/**
+ * @}
+ */
+
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup TIM_LL_EC_BREAK_ENABLE Break Enable
+ * @{
+ */
+#define LL_TIM_BREAK_DISABLE 0x00000000U /*!< Break function disabled */
+#define LL_TIM_BREAK_ENABLE TIM_BDTR_BKE /*!< Break function enabled */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EC_AUTOMATICOUTPUT_ENABLE Automatic output enable
+ * @{
+ */
+#define LL_TIM_AUTOMATICOUTPUT_DISABLE 0x00000000U /*!< MOE can be set only by software */
+#define LL_TIM_AUTOMATICOUTPUT_ENABLE TIM_BDTR_AOE /*!< MOE can be set by software or automatically at the next update event */
+/**
+ * @}
+ */
+#endif /* USE_FULL_LL_DRIVER */
+
+/** @defgroup TIM_LL_EC_IT IT Defines
+ * @brief IT defines which can be used with LL_TIM_ReadReg and LL_TIM_WriteReg functions.
+ * @{
+ */
+#define LL_TIM_DIER_UIE TIM_DIER_UIE /*!< Update interrupt enable */
+#define LL_TIM_DIER_CC1IE TIM_DIER_CC1IE /*!< Capture/compare 1 interrupt enable */
+#define LL_TIM_DIER_CC2IE TIM_DIER_CC2IE /*!< Capture/compare 2 interrupt enable */
+#define LL_TIM_DIER_CC3IE TIM_DIER_CC3IE /*!< Capture/compare 3 interrupt enable */
+#define LL_TIM_DIER_CC4IE TIM_DIER_CC4IE /*!< Capture/compare 4 interrupt enable */
+#define LL_TIM_DIER_COMIE TIM_DIER_COMIE /*!< COM interrupt enable */
+#define LL_TIM_DIER_TIE TIM_DIER_TIE /*!< Trigger interrupt enable */
+#define LL_TIM_DIER_BIE TIM_DIER_BIE /*!< Break interrupt enable */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EC_UPDATESOURCE Update Source
+ * @{
+ */
+#define LL_TIM_UPDATESOURCE_REGULAR 0x00000000U /*!< Counter overflow/underflow, Setting the UG bit or Update generation through the slave mode controller generates an update request */
+#define LL_TIM_UPDATESOURCE_COUNTER TIM_CR1_URS /*!< Only counter overflow/underflow generates an update request */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EC_ONEPULSEMODE One Pulse Mode
+ * @{
+ */
+#define LL_TIM_ONEPULSEMODE_SINGLE TIM_CR1_OPM /*!< Counter is not stopped at update event */
+#define LL_TIM_ONEPULSEMODE_REPETITIVE 0x00000000U /*!< Counter stops counting at the next update event */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EC_COUNTERMODE Counter Mode
+ * @{
+ */
+#define LL_TIM_COUNTERMODE_UP 0x00000000U /*!<Counter used as upcounter */
+#define LL_TIM_COUNTERMODE_DOWN TIM_CR1_DIR /*!< Counter used as downcounter */
+#define LL_TIM_COUNTERMODE_CENTER_UP TIM_CR1_CMS_0 /*!< The counter counts up and down alternatively. Output compare interrupt flags of output channels are set only when the counter is counting down. */
+#define LL_TIM_COUNTERMODE_CENTER_DOWN TIM_CR1_CMS_1 /*!<The counter counts up and down alternatively. Output compare interrupt flags of output channels are set only when the counter is counting up */
+#define LL_TIM_COUNTERMODE_CENTER_UP_DOWN TIM_CR1_CMS /*!< The counter counts up and down alternatively. Output compare interrupt flags of output channels are set only when the counter is counting up or down. */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EC_CLOCKDIVISION Clock Division
+ * @{
+ */
+#define LL_TIM_CLOCKDIVISION_DIV1 0x00000000U /*!< tDTS=tCK_INT */
+#define LL_TIM_CLOCKDIVISION_DIV2 TIM_CR1_CKD_0 /*!< tDTS=2*tCK_INT */
+#define LL_TIM_CLOCKDIVISION_DIV4 TIM_CR1_CKD_1 /*!< tDTS=4*tCK_INT */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EC_COUNTERDIRECTION Counter Direction
+ * @{
+ */
+#define LL_TIM_COUNTERDIRECTION_UP 0x00000000U /*!< Timer counter counts up */
+#define LL_TIM_COUNTERDIRECTION_DOWN TIM_CR1_DIR /*!< Timer counter counts down */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EC_CCUPDATESOURCE Capture Compare Update Source
+ * @{
+ */
+#define LL_TIM_CCUPDATESOURCE_COMG_ONLY 0x00000000U /*!< Capture/compare control bits are updated by setting the COMG bit only */
+#define LL_TIM_CCUPDATESOURCE_COMG_AND_TRGI TIM_CR2_CCUS /*!< Capture/compare control bits are updated by setting the COMG bit or when a rising edge occurs on trigger input (TRGI) */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EC_CCDMAREQUEST Capture Compare DMA Request
+ * @{
+ */
+#define LL_TIM_CCDMAREQUEST_CC 0x00000000U /*!< CCx DMA request sent when CCx event occurs */
+#define LL_TIM_CCDMAREQUEST_UPDATE TIM_CR2_CCDS /*!< CCx DMA requests sent when update event occurs */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EC_LOCKLEVEL Lock Level
+ * @{
+ */
+#define LL_TIM_LOCKLEVEL_OFF 0x00000000U /*!< LOCK OFF - No bit is write protected */
+#define LL_TIM_LOCKLEVEL_1 TIM_BDTR_LOCK_0 /*!< LOCK Level 1 */
+#define LL_TIM_LOCKLEVEL_2 TIM_BDTR_LOCK_1 /*!< LOCK Level 2 */
+#define LL_TIM_LOCKLEVEL_3 TIM_BDTR_LOCK /*!< LOCK Level 3 */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EC_CHANNEL Channel
+ * @{
+ */
+#define LL_TIM_CHANNEL_CH1 TIM_CCER_CC1E /*!< Timer input/output channel 1 */
+#define LL_TIM_CHANNEL_CH1N TIM_CCER_CC1NE /*!< Timer complementary output channel 1 */
+#define LL_TIM_CHANNEL_CH2 TIM_CCER_CC2E /*!< Timer input/output channel 2 */
+#define LL_TIM_CHANNEL_CH2N TIM_CCER_CC2NE /*!< Timer complementary output channel 2 */
+#define LL_TIM_CHANNEL_CH3 TIM_CCER_CC3E /*!< Timer input/output channel 3 */
+#define LL_TIM_CHANNEL_CH3N TIM_CCER_CC3NE /*!< Timer complementary output channel 3 */
+#define LL_TIM_CHANNEL_CH4 TIM_CCER_CC4E /*!< Timer input/output channel 4 */
+/**
+ * @}
+ */
+
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup TIM_LL_EC_OCSTATE Output Configuration State
+ * @{
+ */
+#define LL_TIM_OCSTATE_DISABLE 0x00000000U /*!< OCx is not active */
+#define LL_TIM_OCSTATE_ENABLE TIM_CCER_CC1E /*!< OCx signal is output on the corresponding output pin */
+/**
+ * @}
+ */
+#endif /* USE_FULL_LL_DRIVER */
+
+/** @defgroup TIM_LL_EC_OCMODE Output Configuration Mode
+ * @{
+ */
+#define LL_TIM_OCMODE_FROZEN 0x00000000U /*!<The comparison between the output compare register TIMx_CCRy and the counter TIMx_CNT has no effect on the output channel level */
+#define LL_TIM_OCMODE_ACTIVE TIM_CCMR1_OC1M_0 /*!<OCyREF is forced high on compare match*/
+#define LL_TIM_OCMODE_INACTIVE TIM_CCMR1_OC1M_1 /*!<OCyREF is forced low on compare match*/
+#define LL_TIM_OCMODE_TOGGLE (TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0) /*!<OCyREF toggles on compare match*/
+#define LL_TIM_OCMODE_FORCED_INACTIVE TIM_CCMR1_OC1M_2 /*!<OCyREF is forced low*/
+#define LL_TIM_OCMODE_FORCED_ACTIVE (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_0) /*!<OCyREF is forced high*/
+#define LL_TIM_OCMODE_PWM1 (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1) /*!<In upcounting, channel y is active as long as TIMx_CNT<TIMx_CCRy else inactive. In downcounting, channel y is inactive as long as TIMx_CNT>TIMx_CCRy else active.*/
+#define LL_TIM_OCMODE_PWM2 (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0) /*!<In upcounting, channel y is inactive as long as TIMx_CNT<TIMx_CCRy else active. In downcounting, channel y is active as long as TIMx_CNT>TIMx_CCRy else inactive*/
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EC_OCPOLARITY Output Configuration Polarity
+ * @{
+ */
+#define LL_TIM_OCPOLARITY_HIGH 0x00000000U /*!< OCxactive high*/
+#define LL_TIM_OCPOLARITY_LOW TIM_CCER_CC1P /*!< OCxactive low*/
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EC_OCIDLESTATE Output Configuration Idle State
+ * @{
+ */
+#define LL_TIM_OCIDLESTATE_LOW 0x00000000U /*!<OCx=0 (after a dead-time if OC is implemented) when MOE=0*/
+#define LL_TIM_OCIDLESTATE_HIGH TIM_CR2_OIS1 /*!<OCx=1 (after a dead-time if OC is implemented) when MOE=0*/
+/**
+ * @}
+ */
+
+
+/** @defgroup TIM_LL_EC_ACTIVEINPUT Active Input Selection
+ * @{
+ */
+#define LL_TIM_ACTIVEINPUT_DIRECTTI (TIM_CCMR1_CC1S_0 << 16U) /*!< ICx is mapped on TIx */
+#define LL_TIM_ACTIVEINPUT_INDIRECTTI (TIM_CCMR1_CC1S_1 << 16U) /*!< ICx is mapped on TIy */
+#define LL_TIM_ACTIVEINPUT_TRC (TIM_CCMR1_CC1S << 16U) /*!< ICx is mapped on TRC */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EC_ICPSC Input Configuration Prescaler
+ * @{
+ */
+#define LL_TIM_ICPSC_DIV1 0x00000000U /*!< No prescaler, capture is done each time an edge is detected on the capture input */
+#define LL_TIM_ICPSC_DIV2 (TIM_CCMR1_IC1PSC_0 << 16U) /*!< Capture is done once every 2 events */
+#define LL_TIM_ICPSC_DIV4 (TIM_CCMR1_IC1PSC_1 << 16U) /*!< Capture is done once every 4 events */
+#define LL_TIM_ICPSC_DIV8 (TIM_CCMR1_IC1PSC << 16U) /*!< Capture is done once every 8 events */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EC_IC_FILTER Input Configuration Filter
+ * @{
+ */
+#define LL_TIM_IC_FILTER_FDIV1 0x00000000U /*!< No filter, sampling is done at fDTS */
+#define LL_TIM_IC_FILTER_FDIV1_N2 (TIM_CCMR1_IC1F_0 << 16U) /*!< fSAMPLING=fCK_INT, N=2 */
+#define LL_TIM_IC_FILTER_FDIV1_N4 (TIM_CCMR1_IC1F_1 << 16U) /*!< fSAMPLING=fCK_INT, N=4 */
+#define LL_TIM_IC_FILTER_FDIV1_N8 ((TIM_CCMR1_IC1F_1 | TIM_CCMR1_IC1F_0) << 16U) /*!< fSAMPLING=fCK_INT, N=8 */
+#define LL_TIM_IC_FILTER_FDIV2_N6 (TIM_CCMR1_IC1F_2 << 16U) /*!< fSAMPLING=fDTS/2, N=6 */
+#define LL_TIM_IC_FILTER_FDIV2_N8 ((TIM_CCMR1_IC1F_2 | TIM_CCMR1_IC1F_0) << 16U) /*!< fSAMPLING=fDTS/2, N=8 */
+#define LL_TIM_IC_FILTER_FDIV4_N6 ((TIM_CCMR1_IC1F_2 | TIM_CCMR1_IC1F_1) << 16U) /*!< fSAMPLING=fDTS/4, N=6 */
+#define LL_TIM_IC_FILTER_FDIV4_N8 ((TIM_CCMR1_IC1F_2 | TIM_CCMR1_IC1F_1 | TIM_CCMR1_IC1F_0) << 16U) /*!< fSAMPLING=fDTS/4, N=8 */
+#define LL_TIM_IC_FILTER_FDIV8_N6 (TIM_CCMR1_IC1F_3 << 16U) /*!< fSAMPLING=fDTS/8, N=6 */
+#define LL_TIM_IC_FILTER_FDIV8_N8 ((TIM_CCMR1_IC1F_3 | TIM_CCMR1_IC1F_0) << 16U) /*!< fSAMPLING=fDTS/8, N=8 */
+#define LL_TIM_IC_FILTER_FDIV16_N5 ((TIM_CCMR1_IC1F_3 | TIM_CCMR1_IC1F_1) << 16U) /*!< fSAMPLING=fDTS/16, N=5 */
+#define LL_TIM_IC_FILTER_FDIV16_N6 ((TIM_CCMR1_IC1F_3 | TIM_CCMR1_IC1F_1 | TIM_CCMR1_IC1F_0) << 16U) /*!< fSAMPLING=fDTS/16, N=6 */
+#define LL_TIM_IC_FILTER_FDIV16_N8 ((TIM_CCMR1_IC1F_3 | TIM_CCMR1_IC1F_2) << 16U) /*!< fSAMPLING=fDTS/16, N=8 */
+#define LL_TIM_IC_FILTER_FDIV32_N5 ((TIM_CCMR1_IC1F_3 | TIM_CCMR1_IC1F_2 | TIM_CCMR1_IC1F_0) << 16U) /*!< fSAMPLING=fDTS/32, N=5 */
+#define LL_TIM_IC_FILTER_FDIV32_N6 ((TIM_CCMR1_IC1F_3 | TIM_CCMR1_IC1F_2 | TIM_CCMR1_IC1F_1) << 16U) /*!< fSAMPLING=fDTS/32, N=6 */
+#define LL_TIM_IC_FILTER_FDIV32_N8 (TIM_CCMR1_IC1F << 16U) /*!< fSAMPLING=fDTS/32, N=8 */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EC_IC_POLARITY Input Configuration Polarity
+ * @{
+ */
+#define LL_TIM_IC_POLARITY_RISING 0x00000000U /*!< The circuit is sensitive to TIxFP1 rising edge, TIxFP1 is not inverted */
+#define LL_TIM_IC_POLARITY_FALLING TIM_CCER_CC1P /*!< The circuit is sensitive to TIxFP1 falling edge, TIxFP1 is inverted */
+#define LL_TIM_IC_POLARITY_BOTHEDGE (TIM_CCER_CC1P | TIM_CCER_CC1NP) /*!< The circuit is sensitive to both TIxFP1 rising and falling edges, TIxFP1 is not inverted */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EC_CLOCKSOURCE Clock Source
+ * @{
+ */
+#define LL_TIM_CLOCKSOURCE_INTERNAL 0x00000000U /*!< The timer is clocked by the internal clock provided from the RCC */
+#define LL_TIM_CLOCKSOURCE_EXT_MODE1 (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0) /*!< Counter counts at each rising or falling edge on a selected input*/
+#define LL_TIM_CLOCKSOURCE_EXT_MODE2 TIM_SMCR_ECE /*!< Counter counts at each rising or falling edge on the external trigger input ETR */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EC_ENCODERMODE Encoder Mode
+ * @{
+ */
+#define LL_TIM_ENCODERMODE_X2_TI1 TIM_SMCR_SMS_0 /*!< Quadrature encoder mode 1, x2 mode - Counter counts up/down on TI1FP1 edge depending on TI2FP2 level */
+#define LL_TIM_ENCODERMODE_X2_TI2 TIM_SMCR_SMS_1 /*!< Quadrature encoder mode 2, x2 mode - Counter counts up/down on TI2FP2 edge depending on TI1FP1 level */
+#define LL_TIM_ENCODERMODE_X4_TI12 (TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0) /*!< Quadrature encoder mode 3, x4 mode - Counter counts up/down on both TI1FP1 and TI2FP2 edges depending on the level of the other input */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EC_TRGO Trigger Output
+ * @{
+ */
+#define LL_TIM_TRGO_RESET 0x00000000U /*!< UG bit from the TIMx_EGR register is used as trigger output */
+#define LL_TIM_TRGO_ENABLE TIM_CR2_MMS_0 /*!< Counter Enable signal (CNT_EN) is used as trigger output */
+#define LL_TIM_TRGO_UPDATE TIM_CR2_MMS_1 /*!< Update event is used as trigger output */
+#define LL_TIM_TRGO_CC1IF (TIM_CR2_MMS_1 | TIM_CR2_MMS_0) /*!< CC1 capture or a compare match is used as trigger output */
+#define LL_TIM_TRGO_OC1REF TIM_CR2_MMS_2 /*!< OC1REF signal is used as trigger output */
+#define LL_TIM_TRGO_OC2REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_0) /*!< OC2REF signal is used as trigger output */
+#define LL_TIM_TRGO_OC3REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_1) /*!< OC3REF signal is used as trigger output */
+#define LL_TIM_TRGO_OC4REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_1 | TIM_CR2_MMS_0) /*!< OC4REF signal is used as trigger output */
+/**
+ * @}
+ */
+
+
+/** @defgroup TIM_LL_EC_SLAVEMODE Slave Mode
+ * @{
+ */
+#define LL_TIM_SLAVEMODE_DISABLED 0x00000000U /*!< Slave mode disabled */
+#define LL_TIM_SLAVEMODE_RESET TIM_SMCR_SMS_2 /*!< Reset Mode - Rising edge of the selected trigger input (TRGI) reinitializes the counter */
+#define LL_TIM_SLAVEMODE_GATED (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_0) /*!< Gated Mode - The counter clock is enabled when the trigger input (TRGI) is high */
+#define LL_TIM_SLAVEMODE_TRIGGER (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1) /*!< Trigger Mode - The counter starts at a rising edge of the trigger TRGI */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EC_TS Trigger Selection
+ * @{
+ */
+#define LL_TIM_TS_ITR0 0x00000000U /*!< Internal Trigger 0 (ITR0) is used as trigger input */
+#define LL_TIM_TS_ITR1 TIM_SMCR_TS_0 /*!< Internal Trigger 1 (ITR1) is used as trigger input */
+#define LL_TIM_TS_ITR2 TIM_SMCR_TS_1 /*!< Internal Trigger 2 (ITR2) is used as trigger input */
+#define LL_TIM_TS_ITR3 (TIM_SMCR_TS_0 | TIM_SMCR_TS_1) /*!< Internal Trigger 3 (ITR3) is used as trigger input */
+#define LL_TIM_TS_TI1F_ED TIM_SMCR_TS_2 /*!< TI1 Edge Detector (TI1F_ED) is used as trigger input */
+#define LL_TIM_TS_TI1FP1 (TIM_SMCR_TS_2 | TIM_SMCR_TS_0) /*!< Filtered Timer Input 1 (TI1FP1) is used as trigger input */
+#define LL_TIM_TS_TI2FP2 (TIM_SMCR_TS_2 | TIM_SMCR_TS_1) /*!< Filtered Timer Input 2 (TI12P2) is used as trigger input */
+#define LL_TIM_TS_ETRF (TIM_SMCR_TS_2 | TIM_SMCR_TS_1 | TIM_SMCR_TS_0) /*!< Filtered external Trigger (ETRF) is used as trigger input */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EC_ETR_POLARITY External Trigger Polarity
+ * @{
+ */
+#define LL_TIM_ETR_POLARITY_NONINVERTED 0x00000000U /*!< ETR is non-inverted, active at high level or rising edge */
+#define LL_TIM_ETR_POLARITY_INVERTED TIM_SMCR_ETP /*!< ETR is inverted, active at low level or falling edge */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EC_ETR_PRESCALER External Trigger Prescaler
+ * @{
+ */
+#define LL_TIM_ETR_PRESCALER_DIV1 0x00000000U /*!< ETR prescaler OFF */
+#define LL_TIM_ETR_PRESCALER_DIV2 TIM_SMCR_ETPS_0 /*!< ETR frequency is divided by 2 */
+#define LL_TIM_ETR_PRESCALER_DIV4 TIM_SMCR_ETPS_1 /*!< ETR frequency is divided by 4 */
+#define LL_TIM_ETR_PRESCALER_DIV8 TIM_SMCR_ETPS /*!< ETR frequency is divided by 8 */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EC_ETR_FILTER External Trigger Filter
+ * @{
+ */
+#define LL_TIM_ETR_FILTER_FDIV1 0x00000000U /*!< No filter, sampling is done at fDTS */
+#define LL_TIM_ETR_FILTER_FDIV1_N2 TIM_SMCR_ETF_0 /*!< fSAMPLING=fCK_INT, N=2 */
+#define LL_TIM_ETR_FILTER_FDIV1_N4 TIM_SMCR_ETF_1 /*!< fSAMPLING=fCK_INT, N=4 */
+#define LL_TIM_ETR_FILTER_FDIV1_N8 (TIM_SMCR_ETF_1 | TIM_SMCR_ETF_0) /*!< fSAMPLING=fCK_INT, N=8 */
+#define LL_TIM_ETR_FILTER_FDIV2_N6 TIM_SMCR_ETF_2 /*!< fSAMPLING=fDTS/2, N=6 */
+#define LL_TIM_ETR_FILTER_FDIV2_N8 (TIM_SMCR_ETF_2 | TIM_SMCR_ETF_0) /*!< fSAMPLING=fDTS/2, N=8 */
+#define LL_TIM_ETR_FILTER_FDIV4_N6 (TIM_SMCR_ETF_2 | TIM_SMCR_ETF_1) /*!< fSAMPLING=fDTS/4, N=6 */
+#define LL_TIM_ETR_FILTER_FDIV4_N8 (TIM_SMCR_ETF_2 | TIM_SMCR_ETF_1 | TIM_SMCR_ETF_0) /*!< fSAMPLING=fDTS/4, N=8 */
+#define LL_TIM_ETR_FILTER_FDIV8_N6 TIM_SMCR_ETF_3 /*!< fSAMPLING=fDTS/8, N=8 */
+#define LL_TIM_ETR_FILTER_FDIV8_N8 (TIM_SMCR_ETF_3 | TIM_SMCR_ETF_0) /*!< fSAMPLING=fDTS/16, N=5 */
+#define LL_TIM_ETR_FILTER_FDIV16_N5 (TIM_SMCR_ETF_3 | TIM_SMCR_ETF_1) /*!< fSAMPLING=fDTS/16, N=6 */
+#define LL_TIM_ETR_FILTER_FDIV16_N6 (TIM_SMCR_ETF_3 | TIM_SMCR_ETF_1 | TIM_SMCR_ETF_0) /*!< fSAMPLING=fDTS/16, N=8 */
+#define LL_TIM_ETR_FILTER_FDIV16_N8 (TIM_SMCR_ETF_3 | TIM_SMCR_ETF_2) /*!< fSAMPLING=fDTS/16, N=5 */
+#define LL_TIM_ETR_FILTER_FDIV32_N5 (TIM_SMCR_ETF_3 | TIM_SMCR_ETF_2 | TIM_SMCR_ETF_0) /*!< fSAMPLING=fDTS/32, N=5 */
+#define LL_TIM_ETR_FILTER_FDIV32_N6 (TIM_SMCR_ETF_3 | TIM_SMCR_ETF_2 | TIM_SMCR_ETF_1) /*!< fSAMPLING=fDTS/32, N=6 */
+#define LL_TIM_ETR_FILTER_FDIV32_N8 TIM_SMCR_ETF /*!< fSAMPLING=fDTS/32, N=8 */
+/**
+ * @}
+ */
+
+
+/** @defgroup TIM_LL_EC_BREAK_POLARITY break polarity
+ * @{
+ */
+#define LL_TIM_BREAK_POLARITY_LOW 0x00000000U /*!< Break input BRK is active low */
+#define LL_TIM_BREAK_POLARITY_HIGH TIM_BDTR_BKP /*!< Break input BRK is active high */
+/**
+ * @}
+ */
+
+
+
+
+/** @defgroup TIM_LL_EC_OSSI OSSI
+ * @{
+ */
+#define LL_TIM_OSSI_DISABLE 0x00000000U /*!< When inactive, OCx/OCxN outputs are disabled */
+#define LL_TIM_OSSI_ENABLE TIM_BDTR_OSSI /*!< When inactive, OxC/OCxN outputs are first forced with their inactive level then forced to their idle level after the deadtime */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EC_OSSR OSSR
+ * @{
+ */
+#define LL_TIM_OSSR_DISABLE 0x00000000U /*!< When inactive, OCx/OCxN outputs are disabled */
+#define LL_TIM_OSSR_ENABLE TIM_BDTR_OSSR /*!< When inactive, OC/OCN outputs are enabled with their inactive level as soon as CCxE=1 or CCxNE=1 */
+/**
+ * @}
+ */
+
+
+/** @defgroup TIM_LL_EC_DMABURST_BASEADDR DMA Burst Base Address
+ * @{
+ */
+#define LL_TIM_DMABURST_BASEADDR_CR1 0x00000000U /*!< TIMx_CR1 register is the DMA base address for DMA burst */
+#define LL_TIM_DMABURST_BASEADDR_CR2 TIM_DCR_DBA_0 /*!< TIMx_CR2 register is the DMA base address for DMA burst */
+#define LL_TIM_DMABURST_BASEADDR_SMCR TIM_DCR_DBA_1 /*!< TIMx_SMCR register is the DMA base address for DMA burst */
+#define LL_TIM_DMABURST_BASEADDR_DIER (TIM_DCR_DBA_1 | TIM_DCR_DBA_0) /*!< TIMx_DIER register is the DMA base address for DMA burst */
+#define LL_TIM_DMABURST_BASEADDR_SR TIM_DCR_DBA_2 /*!< TIMx_SR register is the DMA base address for DMA burst */
+#define LL_TIM_DMABURST_BASEADDR_EGR (TIM_DCR_DBA_2 | TIM_DCR_DBA_0) /*!< TIMx_EGR register is the DMA base address for DMA burst */
+#define LL_TIM_DMABURST_BASEADDR_CCMR1 (TIM_DCR_DBA_2 | TIM_DCR_DBA_1) /*!< TIMx_CCMR1 register is the DMA base address for DMA burst */
+#define LL_TIM_DMABURST_BASEADDR_CCMR2 (TIM_DCR_DBA_2 | TIM_DCR_DBA_1 | TIM_DCR_DBA_0) /*!< TIMx_CCMR2 register is the DMA base address for DMA burst */
+#define LL_TIM_DMABURST_BASEADDR_CCER TIM_DCR_DBA_3 /*!< TIMx_CCER register is the DMA base address for DMA burst */
+#define LL_TIM_DMABURST_BASEADDR_CNT (TIM_DCR_DBA_3 | TIM_DCR_DBA_0) /*!< TIMx_CNT register is the DMA base address for DMA burst */
+#define LL_TIM_DMABURST_BASEADDR_PSC (TIM_DCR_DBA_3 | TIM_DCR_DBA_1) /*!< TIMx_PSC register is the DMA base address for DMA burst */
+#define LL_TIM_DMABURST_BASEADDR_ARR (TIM_DCR_DBA_3 | TIM_DCR_DBA_1 | TIM_DCR_DBA_0) /*!< TIMx_ARR register is the DMA base address for DMA burst */
+#define LL_TIM_DMABURST_BASEADDR_RCR (TIM_DCR_DBA_3 | TIM_DCR_DBA_2) /*!< TIMx_RCR register is the DMA base address for DMA burst */
+#define LL_TIM_DMABURST_BASEADDR_CCR1 (TIM_DCR_DBA_3 | TIM_DCR_DBA_2 | TIM_DCR_DBA_0) /*!< TIMx_CCR1 register is the DMA base address for DMA burst */
+#define LL_TIM_DMABURST_BASEADDR_CCR2 (TIM_DCR_DBA_3 | TIM_DCR_DBA_2 | TIM_DCR_DBA_1) /*!< TIMx_CCR2 register is the DMA base address for DMA burst */
+#define LL_TIM_DMABURST_BASEADDR_CCR3 (TIM_DCR_DBA_3 | TIM_DCR_DBA_2 | TIM_DCR_DBA_1 | TIM_DCR_DBA_0) /*!< TIMx_CCR3 register is the DMA base address for DMA burst */
+#define LL_TIM_DMABURST_BASEADDR_CCR4 TIM_DCR_DBA_4 /*!< TIMx_CCR4 register is the DMA base address for DMA burst */
+#define LL_TIM_DMABURST_BASEADDR_BDTR (TIM_DCR_DBA_4 | TIM_DCR_DBA_0) /*!< TIMx_BDTR register is the DMA base address for DMA burst */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EC_DMABURST_LENGTH DMA Burst Length
+ * @{
+ */
+#define LL_TIM_DMABURST_LENGTH_1TRANSFER 0x00000000U /*!< Transfer is done to 1 register starting from the DMA burst base address */
+#define LL_TIM_DMABURST_LENGTH_2TRANSFERS TIM_DCR_DBL_0 /*!< Transfer is done to 2 registers starting from the DMA burst base address */
+#define LL_TIM_DMABURST_LENGTH_3TRANSFERS TIM_DCR_DBL_1 /*!< Transfer is done to 3 registers starting from the DMA burst base address */
+#define LL_TIM_DMABURST_LENGTH_4TRANSFERS (TIM_DCR_DBL_1 | TIM_DCR_DBL_0) /*!< Transfer is done to 4 registers starting from the DMA burst base address */
+#define LL_TIM_DMABURST_LENGTH_5TRANSFERS TIM_DCR_DBL_2 /*!< Transfer is done to 5 registers starting from the DMA burst base address */
+#define LL_TIM_DMABURST_LENGTH_6TRANSFERS (TIM_DCR_DBL_2 | TIM_DCR_DBL_0) /*!< Transfer is done to 6 registers starting from the DMA burst base address */
+#define LL_TIM_DMABURST_LENGTH_7TRANSFERS (TIM_DCR_DBL_2 | TIM_DCR_DBL_1) /*!< Transfer is done to 7 registers starting from the DMA burst base address */
+#define LL_TIM_DMABURST_LENGTH_8TRANSFERS (TIM_DCR_DBL_2 | TIM_DCR_DBL_1 | TIM_DCR_DBL_0) /*!< Transfer is done to 1 registers starting from the DMA burst base address */
+#define LL_TIM_DMABURST_LENGTH_9TRANSFERS TIM_DCR_DBL_3 /*!< Transfer is done to 9 registers starting from the DMA burst base address */
+#define LL_TIM_DMABURST_LENGTH_10TRANSFERS (TIM_DCR_DBL_3 | TIM_DCR_DBL_0) /*!< Transfer is done to 10 registers starting from the DMA burst base address */
+#define LL_TIM_DMABURST_LENGTH_11TRANSFERS (TIM_DCR_DBL_3 | TIM_DCR_DBL_1) /*!< Transfer is done to 11 registers starting from the DMA burst base address */
+#define LL_TIM_DMABURST_LENGTH_12TRANSFERS (TIM_DCR_DBL_3 | TIM_DCR_DBL_1 | TIM_DCR_DBL_0) /*!< Transfer is done to 12 registers starting from the DMA burst base address */
+#define LL_TIM_DMABURST_LENGTH_13TRANSFERS (TIM_DCR_DBL_3 | TIM_DCR_DBL_2) /*!< Transfer is done to 13 registers starting from the DMA burst base address */
+#define LL_TIM_DMABURST_LENGTH_14TRANSFERS (TIM_DCR_DBL_3 | TIM_DCR_DBL_2 | TIM_DCR_DBL_0) /*!< Transfer is done to 14 registers starting from the DMA burst base address */
+#define LL_TIM_DMABURST_LENGTH_15TRANSFERS (TIM_DCR_DBL_3 | TIM_DCR_DBL_2 | TIM_DCR_DBL_1) /*!< Transfer is done to 15 registers starting from the DMA burst base address */
+#define LL_TIM_DMABURST_LENGTH_16TRANSFERS (TIM_DCR_DBL_3 | TIM_DCR_DBL_2 | TIM_DCR_DBL_1 | TIM_DCR_DBL_0) /*!< Transfer is done to 16 registers starting from the DMA burst base address */
+#define LL_TIM_DMABURST_LENGTH_17TRANSFERS TIM_DCR_DBL_4 /*!< Transfer is done to 17 registers starting from the DMA burst base address */
+#define LL_TIM_DMABURST_LENGTH_18TRANSFERS (TIM_DCR_DBL_4 | TIM_DCR_DBL_0) /*!< Transfer is done to 18 registers starting from the DMA burst base address */
+/**
+ * @}
+ */
+
+
+#define LL_TIM_TIM14_TI1_RMP_GPIO TIM14_OR_RMP_MASK /*!< TIM14_TI1 is connected to Ored GPIO */
+#define LL_TIM_TIM14_TI1_RMP_RTC_CLK (TIM14_OR_TI1_RMP_0 | TIM14_OR_RMP_MASK) /*!< TIM14_TI1 is connected to RTC clock */
+#define LL_TIM_TIM14_TI1_RMP_HSE (TIM14_OR_TI1_RMP_1 | TIM14_OR_RMP_MASK) /*!< TIM14_TI1 is connected to HSE/32 clock */
+#define LL_TIM_TIM14_TI1_RMP_MCO (TIM14_OR_TI1_RMP_0 | TIM14_OR_TI1_RMP_1 | TIM14_OR_RMP_MASK) /*!< TIM14_TI1 is connected to MCO */
+
+
+/** @defgroup TIM_LL_EC_OCREF_CLR_INT OCREF clear input selection
+ * @{
+ */
+#define LL_TIM_OCREF_CLR_INT_OCREF_CLR 0x00000000U /*!< OCREF_CLR_INT is connected to the OCREF_CLR input */
+#define LL_TIM_OCREF_CLR_INT_ETR TIM_SMCR_OCCS /*!< OCREF_CLR_INT is connected to ETRF */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup TIM_LL_Exported_Macros TIM Exported Macros
+ * @{
+ */
+
+/** @defgroup TIM_LL_EM_WRITE_READ Common Write and read registers Macros
+ * @{
+ */
+/**
+ * @brief Write a value in TIM register.
+ * @param __INSTANCE__ TIM Instance
+ * @param __REG__ Register to be written
+ * @param __VALUE__ Value to be written in the register
+ * @retval None
+ */
+#define LL_TIM_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG((__INSTANCE__)->__REG__, (__VALUE__))
+
+/**
+ * @brief Read a value in TIM register.
+ * @param __INSTANCE__ TIM Instance
+ * @param __REG__ Register to be read
+ * @retval Register value
+ */
+#define LL_TIM_ReadReg(__INSTANCE__, __REG__) READ_REG((__INSTANCE__)->__REG__)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EM_Exported_Macros Exported_Macros
+ * @{
+ */
+
+/**
+ * @brief HELPER macro calculating DTG[0:7] in the TIMx_BDTR register to achieve the requested dead time duration.
+ * @note ex: @ref __LL_TIM_CALC_DEADTIME (80000000, @ref LL_TIM_GetClockDivision (), 120);
+ * @param __TIMCLK__ timer input clock frequency (in Hz)
+ * @param __CKD__ This parameter can be one of the following values:
+ * @arg @ref LL_TIM_CLOCKDIVISION_DIV1
+ * @arg @ref LL_TIM_CLOCKDIVISION_DIV2
+ * @arg @ref LL_TIM_CLOCKDIVISION_DIV4
+ * @param __DT__ deadtime duration (in ns)
+ * @retval DTG[0:7]
+ */
+#define __LL_TIM_CALC_DEADTIME(__TIMCLK__, __CKD__, __DT__) \
+ ( (((uint64_t)((__DT__)*1000U)) < ((DT_DELAY_1+1U) * TIM_CALC_DTS((__TIMCLK__), (__CKD__)))) ? (uint8_t)(((uint64_t)((__DT__)*1000U) / TIM_CALC_DTS((__TIMCLK__), (__CKD__))) & DT_DELAY_1) : \
+ (((uint64_t)((__DT__)*1000U)) < ((64U + (DT_DELAY_2+1U)) * 2U * TIM_CALC_DTS((__TIMCLK__), (__CKD__)))) ? (uint8_t)(DT_RANGE_2 | ((uint8_t)((uint8_t)((((uint64_t)((__DT__)*1000U))/ TIM_CALC_DTS((__TIMCLK__), (__CKD__))) >> 1U) - (uint8_t) 64) & DT_DELAY_2)) :\
+ (((uint64_t)((__DT__)*1000U)) < ((32U + (DT_DELAY_3+1U)) * 8U * TIM_CALC_DTS((__TIMCLK__), (__CKD__)))) ? (uint8_t)(DT_RANGE_3 | ((uint8_t)((uint8_t)(((((uint64_t)(__DT__)*1000U))/ TIM_CALC_DTS((__TIMCLK__), (__CKD__))) >> 3U) - (uint8_t) 32) & DT_DELAY_3)) :\
+ (((uint64_t)((__DT__)*1000U)) < ((32U + (DT_DELAY_4+1U)) * 16U * TIM_CALC_DTS((__TIMCLK__), (__CKD__)))) ? (uint8_t)(DT_RANGE_4 | ((uint8_t)((uint8_t)(((((uint64_t)(__DT__)*1000U))/ TIM_CALC_DTS((__TIMCLK__), (__CKD__))) >> 4U) - (uint8_t) 32) & DT_DELAY_4)) :\
+ 0U)
+
+/**
+ * @brief HELPER macro calculating the prescaler value to achieve the required counter clock frequency.
+ * @note ex: @ref __LL_TIM_CALC_PSC (80000000, 1000000);
+ * @param __TIMCLK__ timer input clock frequency (in Hz)
+ * @param __CNTCLK__ counter clock frequency (in Hz)
+ * @retval Prescaler value (between Min_Data=0 and Max_Data=65535)
+ */
+#define __LL_TIM_CALC_PSC(__TIMCLK__, __CNTCLK__) \
+ (((__TIMCLK__) >= (__CNTCLK__)) ? (uint32_t)(((__TIMCLK__)/(__CNTCLK__)) - 1U) : 0U)
+
+/**
+ * @brief HELPER macro calculating the auto-reload value to achieve the required output signal frequency.
+ * @note ex: @ref __LL_TIM_CALC_ARR (1000000, @ref LL_TIM_GetPrescaler (), 10000);
+ * @param __TIMCLK__ timer input clock frequency (in Hz)
+ * @param __PSC__ prescaler
+ * @param __FREQ__ output signal frequency (in Hz)
+ * @retval Auto-reload value (between Min_Data=0 and Max_Data=65535)
+ */
+#define __LL_TIM_CALC_ARR(__TIMCLK__, __PSC__, __FREQ__) \
+ ((((__TIMCLK__)/((__PSC__) + 1U)) >= (__FREQ__)) ? (((__TIMCLK__)/((__FREQ__) * ((__PSC__) + 1U))) - 1U) : 0U)
+
+/**
+ * @brief HELPER macro calculating the compare value required to achieve the required timer output compare active/inactive delay.
+ * @note ex: @ref __LL_TIM_CALC_DELAY (1000000, @ref LL_TIM_GetPrescaler (), 10);
+ * @param __TIMCLK__ timer input clock frequency (in Hz)
+ * @param __PSC__ prescaler
+ * @param __DELAY__ timer output compare active/inactive delay (in us)
+ * @retval Compare value (between Min_Data=0 and Max_Data=65535)
+ */
+#define __LL_TIM_CALC_DELAY(__TIMCLK__, __PSC__, __DELAY__) \
+ ((uint32_t)(((uint64_t)(__TIMCLK__) * (uint64_t)(__DELAY__)) \
+ / ((uint64_t)1000000U * (uint64_t)((__PSC__) + 1U))))
+
+/**
+ * @brief HELPER macro calculating the auto-reload value to achieve the required pulse duration (when the timer operates in one pulse mode).
+ * @note ex: @ref __LL_TIM_CALC_PULSE (1000000, @ref LL_TIM_GetPrescaler (), 10, 20);
+ * @param __TIMCLK__ timer input clock frequency (in Hz)
+ * @param __PSC__ prescaler
+ * @param __DELAY__ timer output compare active/inactive delay (in us)
+ * @param __PULSE__ pulse duration (in us)
+ * @retval Auto-reload value (between Min_Data=0 and Max_Data=65535)
+ */
+#define __LL_TIM_CALC_PULSE(__TIMCLK__, __PSC__, __DELAY__, __PULSE__) \
+ ((uint32_t)(__LL_TIM_CALC_DELAY((__TIMCLK__), (__PSC__), (__PULSE__)) \
+ + __LL_TIM_CALC_DELAY((__TIMCLK__), (__PSC__), (__DELAY__))))
+
+/**
+ * @brief HELPER macro retrieving the ratio of the input capture prescaler
+ * @note ex: @ref __LL_TIM_GET_ICPSC_RATIO (@ref LL_TIM_IC_GetPrescaler ());
+ * @param __ICPSC__ This parameter can be one of the following values:
+ * @arg @ref LL_TIM_ICPSC_DIV1
+ * @arg @ref LL_TIM_ICPSC_DIV2
+ * @arg @ref LL_TIM_ICPSC_DIV4
+ * @arg @ref LL_TIM_ICPSC_DIV8
+ * @retval Input capture prescaler ratio (1, 2, 4 or 8)
+ */
+#define __LL_TIM_GET_ICPSC_RATIO(__ICPSC__) \
+ ((uint32_t)(0x01U << (((__ICPSC__) >> 16U) >> TIM_CCMR1_IC1PSC_Pos)))
+
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup TIM_LL_Exported_Functions TIM Exported Functions
+ * @{
+ */
+
+/** @defgroup TIM_LL_EF_Time_Base Time Base configuration
+ * @{
+ */
+/**
+ * @brief Enable timer counter.
+ * @rmtoll CR1 CEN LL_TIM_EnableCounter
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_EnableCounter(TIM_TypeDef *TIMx)
+{
+ SET_BIT(TIMx->CR1, TIM_CR1_CEN);
+}
+
+/**
+ * @brief Disable timer counter.
+ * @rmtoll CR1 CEN LL_TIM_DisableCounter
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_DisableCounter(TIM_TypeDef *TIMx)
+{
+ CLEAR_BIT(TIMx->CR1, TIM_CR1_CEN);
+}
+
+/**
+ * @brief Indicates whether the timer counter is enabled.
+ * @rmtoll CR1 CEN LL_TIM_IsEnabledCounter
+ * @param TIMx Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_IsEnabledCounter(TIM_TypeDef *TIMx)
+{
+ return ((READ_BIT(TIMx->CR1, TIM_CR1_CEN) == (TIM_CR1_CEN)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Enable update event generation.
+ * @rmtoll CR1 UDIS LL_TIM_EnableUpdateEvent
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_EnableUpdateEvent(TIM_TypeDef *TIMx)
+{
+ CLEAR_BIT(TIMx->CR1, TIM_CR1_UDIS);
+}
+
+/**
+ * @brief Disable update event generation.
+ * @rmtoll CR1 UDIS LL_TIM_DisableUpdateEvent
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_DisableUpdateEvent(TIM_TypeDef *TIMx)
+{
+ SET_BIT(TIMx->CR1, TIM_CR1_UDIS);
+}
+
+/**
+ * @brief Indicates whether update event generation is enabled.
+ * @rmtoll CR1 UDIS LL_TIM_IsEnabledUpdateEvent
+ * @param TIMx Timer instance
+ * @retval Inverted state of bit (0 or 1).
+ */
+__STATIC_INLINE uint32_t LL_TIM_IsEnabledUpdateEvent(TIM_TypeDef *TIMx)
+{
+ return ((READ_BIT(TIMx->CR1, TIM_CR1_UDIS) == (uint32_t)RESET) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Set update event source
+ * @note Update event source set to LL_TIM_UPDATESOURCE_REGULAR: any of the following events
+ * generate an update interrupt or DMA request if enabled:
+ * - Counter overflow/underflow
+ * - Setting the UG bit
+ * - Update generation through the slave mode controller
+ * @note Update event source set to LL_TIM_UPDATESOURCE_COUNTER: only counter
+ * overflow/underflow generates an update interrupt or DMA request if enabled.
+ * @rmtoll CR1 URS LL_TIM_SetUpdateSource
+ * @param TIMx Timer instance
+ * @param UpdateSource This parameter can be one of the following values:
+ * @arg @ref LL_TIM_UPDATESOURCE_REGULAR
+ * @arg @ref LL_TIM_UPDATESOURCE_COUNTER
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_SetUpdateSource(TIM_TypeDef *TIMx, uint32_t UpdateSource)
+{
+ MODIFY_REG(TIMx->CR1, TIM_CR1_URS, UpdateSource);
+}
+
+/**
+ * @brief Get actual event update source
+ * @rmtoll CR1 URS LL_TIM_GetUpdateSource
+ * @param TIMx Timer instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_TIM_UPDATESOURCE_REGULAR
+ * @arg @ref LL_TIM_UPDATESOURCE_COUNTER
+ */
+__STATIC_INLINE uint32_t LL_TIM_GetUpdateSource(TIM_TypeDef *TIMx)
+{
+ return (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_URS));
+}
+
+/**
+ * @brief Set one pulse mode (one shot v.s. repetitive).
+ * @rmtoll CR1 OPM LL_TIM_SetOnePulseMode
+ * @param TIMx Timer instance
+ * @param OnePulseMode This parameter can be one of the following values:
+ * @arg @ref LL_TIM_ONEPULSEMODE_SINGLE
+ * @arg @ref LL_TIM_ONEPULSEMODE_REPETITIVE
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_SetOnePulseMode(TIM_TypeDef *TIMx, uint32_t OnePulseMode)
+{
+ MODIFY_REG(TIMx->CR1, TIM_CR1_OPM, OnePulseMode);
+}
+
+/**
+ * @brief Get actual one pulse mode.
+ * @rmtoll CR1 OPM LL_TIM_GetOnePulseMode
+ * @param TIMx Timer instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_TIM_ONEPULSEMODE_SINGLE
+ * @arg @ref LL_TIM_ONEPULSEMODE_REPETITIVE
+ */
+__STATIC_INLINE uint32_t LL_TIM_GetOnePulseMode(TIM_TypeDef *TIMx)
+{
+ return (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_OPM));
+}
+
+/**
+ * @brief Set the timer counter counting mode.
+ * @note Macro IS_TIM_COUNTER_MODE_SELECT_INSTANCE(TIMx) can be used to
+ * check whether or not the counter mode selection feature is supported
+ * by a timer instance.
+ * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse)
+ * requires a timer reset to avoid unexpected direction
+ * due to DIR bit readonly in center aligned mode.
+ * @rmtoll CR1 DIR LL_TIM_SetCounterMode\n
+ * CR1 CMS LL_TIM_SetCounterMode
+ * @param TIMx Timer instance
+ * @param CounterMode This parameter can be one of the following values:
+ * @arg @ref LL_TIM_COUNTERMODE_UP
+ * @arg @ref LL_TIM_COUNTERMODE_DOWN
+ * @arg @ref LL_TIM_COUNTERMODE_CENTER_UP
+ * @arg @ref LL_TIM_COUNTERMODE_CENTER_DOWN
+ * @arg @ref LL_TIM_COUNTERMODE_CENTER_UP_DOWN
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_SetCounterMode(TIM_TypeDef *TIMx, uint32_t CounterMode)
+{
+ MODIFY_REG(TIMx->CR1, (TIM_CR1_DIR | TIM_CR1_CMS), CounterMode);
+}
+
+/**
+ * @brief Get actual counter mode.
+ * @note Macro IS_TIM_COUNTER_MODE_SELECT_INSTANCE(TIMx) can be used to
+ * check whether or not the counter mode selection feature is supported
+ * by a timer instance.
+ * @rmtoll CR1 DIR LL_TIM_GetCounterMode\n
+ * CR1 CMS LL_TIM_GetCounterMode
+ * @param TIMx Timer instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_TIM_COUNTERMODE_UP
+ * @arg @ref LL_TIM_COUNTERMODE_DOWN
+ * @arg @ref LL_TIM_COUNTERMODE_CENTER_UP
+ * @arg @ref LL_TIM_COUNTERMODE_CENTER_DOWN
+ * @arg @ref LL_TIM_COUNTERMODE_CENTER_UP_DOWN
+ */
+__STATIC_INLINE uint32_t LL_TIM_GetCounterMode(TIM_TypeDef *TIMx)
+{
+ return (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_DIR | TIM_CR1_CMS));
+}
+
+/**
+ * @brief Enable auto-reload (ARR) preload.
+ * @rmtoll CR1 ARPE LL_TIM_EnableARRPreload
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_EnableARRPreload(TIM_TypeDef *TIMx)
+{
+ SET_BIT(TIMx->CR1, TIM_CR1_ARPE);
+}
+
+/**
+ * @brief Disable auto-reload (ARR) preload.
+ * @rmtoll CR1 ARPE LL_TIM_DisableARRPreload
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_DisableARRPreload(TIM_TypeDef *TIMx)
+{
+ CLEAR_BIT(TIMx->CR1, TIM_CR1_ARPE);
+}
+
+/**
+ * @brief Indicates whether auto-reload (ARR) preload is enabled.
+ * @rmtoll CR1 ARPE LL_TIM_IsEnabledARRPreload
+ * @param TIMx Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_IsEnabledARRPreload(TIM_TypeDef *TIMx)
+{
+ return ((READ_BIT(TIMx->CR1, TIM_CR1_ARPE) == (TIM_CR1_ARPE)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Set the division ratio between the timer clock and the sampling clock used by the dead-time generators (when supported) and the digital filters.
+ * @note Macro IS_TIM_CLOCK_DIVISION_INSTANCE(TIMx) can be used to check
+ * whether or not the clock division feature is supported by the timer
+ * instance.
+ * @rmtoll CR1 CKD LL_TIM_SetClockDivision
+ * @param TIMx Timer instance
+ * @param ClockDivision This parameter can be one of the following values:
+ * @arg @ref LL_TIM_CLOCKDIVISION_DIV1
+ * @arg @ref LL_TIM_CLOCKDIVISION_DIV2
+ * @arg @ref LL_TIM_CLOCKDIVISION_DIV4
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_SetClockDivision(TIM_TypeDef *TIMx, uint32_t ClockDivision)
+{
+ MODIFY_REG(TIMx->CR1, TIM_CR1_CKD, ClockDivision);
+}
+
+/**
+ * @brief Get the actual division ratio between the timer clock and the sampling clock used by the dead-time generators (when supported) and the digital filters.
+ * @note Macro IS_TIM_CLOCK_DIVISION_INSTANCE(TIMx) can be used to check
+ * whether or not the clock division feature is supported by the timer
+ * instance.
+ * @rmtoll CR1 CKD LL_TIM_GetClockDivision
+ * @param TIMx Timer instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_TIM_CLOCKDIVISION_DIV1
+ * @arg @ref LL_TIM_CLOCKDIVISION_DIV2
+ * @arg @ref LL_TIM_CLOCKDIVISION_DIV4
+ */
+__STATIC_INLINE uint32_t LL_TIM_GetClockDivision(TIM_TypeDef *TIMx)
+{
+ return (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_CKD));
+}
+
+/**
+ * @brief Set the counter value.
+ * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check
+ * whether or not a timer instance supports a 32 bits counter.
+ * @rmtoll CNT CNT LL_TIM_SetCounter
+ * @param TIMx Timer instance
+ * @param Counter Counter value (between Min_Data=0 and Max_Data=0xFFFF or 0xFFFFFFFF)
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_SetCounter(TIM_TypeDef *TIMx, uint32_t Counter)
+{
+ WRITE_REG(TIMx->CNT, Counter);
+}
+
+/**
+ * @brief Get the counter value.
+ * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check
+ * whether or not a timer instance supports a 32 bits counter.
+ * @rmtoll CNT CNT LL_TIM_GetCounter
+ * @param TIMx Timer instance
+ * @retval Counter value (between Min_Data=0 and Max_Data=0xFFFF or 0xFFFFFFFF)
+ */
+__STATIC_INLINE uint32_t LL_TIM_GetCounter(TIM_TypeDef *TIMx)
+{
+ return (uint32_t)(READ_REG(TIMx->CNT));
+}
+
+/**
+ * @brief Get the current direction of the counter
+ * @rmtoll CR1 DIR LL_TIM_GetDirection
+ * @param TIMx Timer instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_TIM_COUNTERDIRECTION_UP
+ * @arg @ref LL_TIM_COUNTERDIRECTION_DOWN
+ */
+__STATIC_INLINE uint32_t LL_TIM_GetDirection(TIM_TypeDef *TIMx)
+{
+ return (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_DIR));
+}
+
+/**
+ * @brief Set the prescaler value.
+ * @note The counter clock frequency CK_CNT is equal to fCK_PSC / (PSC[15:0] + 1).
+ * @note The prescaler can be changed on the fly as this control register is buffered. The new
+ * prescaler ratio is taken into account at the next update event.
+ * @note Helper macro @ref __LL_TIM_CALC_PSC can be used to calculate the Prescaler parameter
+ * @rmtoll PSC PSC LL_TIM_SetPrescaler
+ * @param TIMx Timer instance
+ * @param Prescaler between Min_Data=0 and Max_Data=65535
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_SetPrescaler(TIM_TypeDef *TIMx, uint32_t Prescaler)
+{
+ WRITE_REG(TIMx->PSC, Prescaler);
+}
+
+/**
+ * @brief Get the prescaler value.
+ * @rmtoll PSC PSC LL_TIM_GetPrescaler
+ * @param TIMx Timer instance
+ * @retval Prescaler value between Min_Data=0 and Max_Data=65535
+ */
+__STATIC_INLINE uint32_t LL_TIM_GetPrescaler(TIM_TypeDef *TIMx)
+{
+ return (uint32_t)(READ_REG(TIMx->PSC));
+}
+
+/**
+ * @brief Set the auto-reload value.
+ * @note The counter is blocked while the auto-reload value is null.
+ * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check
+ * whether or not a timer instance supports a 32 bits counter.
+ * @note Helper macro @ref __LL_TIM_CALC_ARR can be used to calculate the AutoReload parameter
+ * @rmtoll ARR ARR LL_TIM_SetAutoReload
+ * @param TIMx Timer instance
+ * @param AutoReload between Min_Data=0 and Max_Data=65535
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_SetAutoReload(TIM_TypeDef *TIMx, uint32_t AutoReload)
+{
+ WRITE_REG(TIMx->ARR, AutoReload);
+}
+
+/**
+ * @brief Get the auto-reload value.
+ * @rmtoll ARR ARR LL_TIM_GetAutoReload
+ * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check
+ * whether or not a timer instance supports a 32 bits counter.
+ * @param TIMx Timer instance
+ * @retval Auto-reload value
+ */
+__STATIC_INLINE uint32_t LL_TIM_GetAutoReload(TIM_TypeDef *TIMx)
+{
+ return (uint32_t)(READ_REG(TIMx->ARR));
+}
+
+/**
+ * @brief Set the repetition counter value.
+ * @note Macro IS_TIM_REPETITION_COUNTER_INSTANCE(TIMx) can be used to check
+ * whether or not a timer instance supports a repetition counter.
+ * @rmtoll RCR REP LL_TIM_SetRepetitionCounter
+ * @param TIMx Timer instance
+ * @param RepetitionCounter between Min_Data=0 and Max_Data=255
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_SetRepetitionCounter(TIM_TypeDef *TIMx, uint32_t RepetitionCounter)
+{
+ WRITE_REG(TIMx->RCR, RepetitionCounter);
+}
+
+/**
+ * @brief Get the repetition counter value.
+ * @note Macro IS_TIM_REPETITION_COUNTER_INSTANCE(TIMx) can be used to check
+ * whether or not a timer instance supports a repetition counter.
+ * @rmtoll RCR REP LL_TIM_GetRepetitionCounter
+ * @param TIMx Timer instance
+ * @retval Repetition counter value
+ */
+__STATIC_INLINE uint32_t LL_TIM_GetRepetitionCounter(TIM_TypeDef *TIMx)
+{
+ return (uint32_t)(READ_REG(TIMx->RCR));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EF_Capture_Compare Capture Compare configuration
+ * @{
+ */
+/**
+ * @brief Enable the capture/compare control bits (CCxE, CCxNE and OCxM) preload.
+ * @note CCxE, CCxNE and OCxM bits are preloaded, after having been written,
+ * they are updated only when a commutation event (COM) occurs.
+ * @note Only on channels that have a complementary output.
+ * @note Macro IS_TIM_COMMUTATION_EVENT_INSTANCE(TIMx) can be used to check
+ * whether or not a timer instance is able to generate a commutation event.
+ * @rmtoll CR2 CCPC LL_TIM_CC_EnablePreload
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_CC_EnablePreload(TIM_TypeDef *TIMx)
+{
+ SET_BIT(TIMx->CR2, TIM_CR2_CCPC);
+}
+
+/**
+ * @brief Disable the capture/compare control bits (CCxE, CCxNE and OCxM) preload.
+ * @note Macro IS_TIM_COMMUTATION_EVENT_INSTANCE(TIMx) can be used to check
+ * whether or not a timer instance is able to generate a commutation event.
+ * @rmtoll CR2 CCPC LL_TIM_CC_DisablePreload
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_CC_DisablePreload(TIM_TypeDef *TIMx)
+{
+ CLEAR_BIT(TIMx->CR2, TIM_CR2_CCPC);
+}
+
+/**
+ * @brief Set the updated source of the capture/compare control bits (CCxE, CCxNE and OCxM).
+ * @note Macro IS_TIM_COMMUTATION_EVENT_INSTANCE(TIMx) can be used to check
+ * whether or not a timer instance is able to generate a commutation event.
+ * @rmtoll CR2 CCUS LL_TIM_CC_SetUpdate
+ * @param TIMx Timer instance
+ * @param CCUpdateSource This parameter can be one of the following values:
+ * @arg @ref LL_TIM_CCUPDATESOURCE_COMG_ONLY
+ * @arg @ref LL_TIM_CCUPDATESOURCE_COMG_AND_TRGI
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_CC_SetUpdate(TIM_TypeDef *TIMx, uint32_t CCUpdateSource)
+{
+ MODIFY_REG(TIMx->CR2, TIM_CR2_CCUS, CCUpdateSource);
+}
+
+/**
+ * @brief Set the trigger of the capture/compare DMA request.
+ * @rmtoll CR2 CCDS LL_TIM_CC_SetDMAReqTrigger
+ * @param TIMx Timer instance
+ * @param DMAReqTrigger This parameter can be one of the following values:
+ * @arg @ref LL_TIM_CCDMAREQUEST_CC
+ * @arg @ref LL_TIM_CCDMAREQUEST_UPDATE
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_CC_SetDMAReqTrigger(TIM_TypeDef *TIMx, uint32_t DMAReqTrigger)
+{
+ MODIFY_REG(TIMx->CR2, TIM_CR2_CCDS, DMAReqTrigger);
+}
+
+/**
+ * @brief Get actual trigger of the capture/compare DMA request.
+ * @rmtoll CR2 CCDS LL_TIM_CC_GetDMAReqTrigger
+ * @param TIMx Timer instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_TIM_CCDMAREQUEST_CC
+ * @arg @ref LL_TIM_CCDMAREQUEST_UPDATE
+ */
+__STATIC_INLINE uint32_t LL_TIM_CC_GetDMAReqTrigger(TIM_TypeDef *TIMx)
+{
+ return (uint32_t)(READ_BIT(TIMx->CR2, TIM_CR2_CCDS));
+}
+
+/**
+ * @brief Set the lock level to freeze the
+ * configuration of several capture/compare parameters.
+ * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not
+ * the lock mechanism is supported by a timer instance.
+ * @rmtoll BDTR LOCK LL_TIM_CC_SetLockLevel
+ * @param TIMx Timer instance
+ * @param LockLevel This parameter can be one of the following values:
+ * @arg @ref LL_TIM_LOCKLEVEL_OFF
+ * @arg @ref LL_TIM_LOCKLEVEL_1
+ * @arg @ref LL_TIM_LOCKLEVEL_2
+ * @arg @ref LL_TIM_LOCKLEVEL_3
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_CC_SetLockLevel(TIM_TypeDef *TIMx, uint32_t LockLevel)
+{
+ MODIFY_REG(TIMx->BDTR, TIM_BDTR_LOCK, LockLevel);
+}
+
+/**
+ * @brief Enable capture/compare channels.
+ * @rmtoll CCER CC1E LL_TIM_CC_EnableChannel\n
+ * CCER CC1NE LL_TIM_CC_EnableChannel\n
+ * CCER CC2E LL_TIM_CC_EnableChannel\n
+ * CCER CC2NE LL_TIM_CC_EnableChannel\n
+ * CCER CC3E LL_TIM_CC_EnableChannel\n
+ * CCER CC3NE LL_TIM_CC_EnableChannel\n
+ * CCER CC4E LL_TIM_CC_EnableChannel
+ * @param TIMx Timer instance
+ * @param Channels This parameter can be a combination of the following values:
+ * @arg @ref LL_TIM_CHANNEL_CH1
+ * @arg @ref LL_TIM_CHANNEL_CH1N
+ * @arg @ref LL_TIM_CHANNEL_CH2
+ * @arg @ref LL_TIM_CHANNEL_CH2N
+ * @arg @ref LL_TIM_CHANNEL_CH3
+ * @arg @ref LL_TIM_CHANNEL_CH3N
+ * @arg @ref LL_TIM_CHANNEL_CH4
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_CC_EnableChannel(TIM_TypeDef *TIMx, uint32_t Channels)
+{
+ SET_BIT(TIMx->CCER, Channels);
+}
+
+/**
+ * @brief Disable capture/compare channels.
+ * @rmtoll CCER CC1E LL_TIM_CC_DisableChannel\n
+ * CCER CC1NE LL_TIM_CC_DisableChannel\n
+ * CCER CC2E LL_TIM_CC_DisableChannel\n
+ * CCER CC2NE LL_TIM_CC_DisableChannel\n
+ * CCER CC3E LL_TIM_CC_DisableChannel\n
+ * CCER CC3NE LL_TIM_CC_DisableChannel\n
+ * CCER CC4E LL_TIM_CC_DisableChannel
+ * @param TIMx Timer instance
+ * @param Channels This parameter can be a combination of the following values:
+ * @arg @ref LL_TIM_CHANNEL_CH1
+ * @arg @ref LL_TIM_CHANNEL_CH1N
+ * @arg @ref LL_TIM_CHANNEL_CH2
+ * @arg @ref LL_TIM_CHANNEL_CH2N
+ * @arg @ref LL_TIM_CHANNEL_CH3
+ * @arg @ref LL_TIM_CHANNEL_CH3N
+ * @arg @ref LL_TIM_CHANNEL_CH4
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_CC_DisableChannel(TIM_TypeDef *TIMx, uint32_t Channels)
+{
+ CLEAR_BIT(TIMx->CCER, Channels);
+}
+
+/**
+ * @brief Indicate whether channel(s) is(are) enabled.
+ * @rmtoll CCER CC1E LL_TIM_CC_IsEnabledChannel\n
+ * CCER CC1NE LL_TIM_CC_IsEnabledChannel\n
+ * CCER CC2E LL_TIM_CC_IsEnabledChannel\n
+ * CCER CC2NE LL_TIM_CC_IsEnabledChannel\n
+ * CCER CC3E LL_TIM_CC_IsEnabledChannel\n
+ * CCER CC3NE LL_TIM_CC_IsEnabledChannel\n
+ * CCER CC4E LL_TIM_CC_IsEnabledChannel
+ * @param TIMx Timer instance
+ * @param Channels This parameter can be a combination of the following values:
+ * @arg @ref LL_TIM_CHANNEL_CH1
+ * @arg @ref LL_TIM_CHANNEL_CH1N
+ * @arg @ref LL_TIM_CHANNEL_CH2
+ * @arg @ref LL_TIM_CHANNEL_CH2N
+ * @arg @ref LL_TIM_CHANNEL_CH3
+ * @arg @ref LL_TIM_CHANNEL_CH3N
+ * @arg @ref LL_TIM_CHANNEL_CH4
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_CC_IsEnabledChannel(TIM_TypeDef *TIMx, uint32_t Channels)
+{
+ return ((READ_BIT(TIMx->CCER, Channels) == (Channels)) ? 1UL : 0UL);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EF_Output_Channel Output channel configuration
+ * @{
+ */
+/**
+ * @brief Configure an output channel.
+ * @rmtoll CCMR1 CC1S LL_TIM_OC_ConfigOutput\n
+ * CCMR1 CC2S LL_TIM_OC_ConfigOutput\n
+ * CCMR2 CC3S LL_TIM_OC_ConfigOutput\n
+ * CCMR2 CC4S LL_TIM_OC_ConfigOutput\n
+ * CCER CC1P LL_TIM_OC_ConfigOutput\n
+ * CCER CC2P LL_TIM_OC_ConfigOutput\n
+ * CCER CC3P LL_TIM_OC_ConfigOutput\n
+ * CCER CC4P LL_TIM_OC_ConfigOutput\n
+ * CR2 OIS1 LL_TIM_OC_ConfigOutput\n
+ * CR2 OIS2 LL_TIM_OC_ConfigOutput\n
+ * CR2 OIS3 LL_TIM_OC_ConfigOutput\n
+ * CR2 OIS4 LL_TIM_OC_ConfigOutput
+ * @param TIMx Timer instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_TIM_CHANNEL_CH1
+ * @arg @ref LL_TIM_CHANNEL_CH2
+ * @arg @ref LL_TIM_CHANNEL_CH3
+ * @arg @ref LL_TIM_CHANNEL_CH4
+ * @param Configuration This parameter must be a combination of all the following values:
+ * @arg @ref LL_TIM_OCPOLARITY_HIGH or @ref LL_TIM_OCPOLARITY_LOW
+ * @arg @ref LL_TIM_OCIDLESTATE_LOW or @ref LL_TIM_OCIDLESTATE_HIGH
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_OC_ConfigOutput(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t Configuration)
+{
+ register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
+ register __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
+ CLEAR_BIT(*pReg, (TIM_CCMR1_CC1S << SHIFT_TAB_OCxx[iChannel]));
+ MODIFY_REG(TIMx->CCER, (TIM_CCER_CC1P << SHIFT_TAB_CCxP[iChannel]),
+ (Configuration & TIM_CCER_CC1P) << SHIFT_TAB_CCxP[iChannel]);
+ MODIFY_REG(TIMx->CR2, (TIM_CR2_OIS1 << SHIFT_TAB_OISx[iChannel]),
+ (Configuration & TIM_CR2_OIS1) << SHIFT_TAB_OISx[iChannel]);
+}
+
+/**
+ * @brief Define the behavior of the output reference signal OCxREF from which
+ * OCx and OCxN (when relevant) are derived.
+ * @rmtoll CCMR1 OC1M LL_TIM_OC_SetMode\n
+ * CCMR1 OC2M LL_TIM_OC_SetMode\n
+ * CCMR2 OC3M LL_TIM_OC_SetMode\n
+ * CCMR2 OC4M LL_TIM_OC_SetMode
+ * @param TIMx Timer instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_TIM_CHANNEL_CH1
+ * @arg @ref LL_TIM_CHANNEL_CH2
+ * @arg @ref LL_TIM_CHANNEL_CH3
+ * @arg @ref LL_TIM_CHANNEL_CH4
+ * @param Mode This parameter can be one of the following values:
+ * @arg @ref LL_TIM_OCMODE_FROZEN
+ * @arg @ref LL_TIM_OCMODE_ACTIVE
+ * @arg @ref LL_TIM_OCMODE_INACTIVE
+ * @arg @ref LL_TIM_OCMODE_TOGGLE
+ * @arg @ref LL_TIM_OCMODE_FORCED_INACTIVE
+ * @arg @ref LL_TIM_OCMODE_FORCED_ACTIVE
+ * @arg @ref LL_TIM_OCMODE_PWM1
+ * @arg @ref LL_TIM_OCMODE_PWM2
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_OC_SetMode(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t Mode)
+{
+ register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
+ register __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
+ MODIFY_REG(*pReg, ((TIM_CCMR1_OC1M | TIM_CCMR1_CC1S) << SHIFT_TAB_OCxx[iChannel]), Mode << SHIFT_TAB_OCxx[iChannel]);
+}
+
+/**
+ * @brief Get the output compare mode of an output channel.
+ * @rmtoll CCMR1 OC1M LL_TIM_OC_GetMode\n
+ * CCMR1 OC2M LL_TIM_OC_GetMode\n
+ * CCMR2 OC3M LL_TIM_OC_GetMode\n
+ * CCMR2 OC4M LL_TIM_OC_GetMode
+ * @param TIMx Timer instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_TIM_CHANNEL_CH1
+ * @arg @ref LL_TIM_CHANNEL_CH2
+ * @arg @ref LL_TIM_CHANNEL_CH3
+ * @arg @ref LL_TIM_CHANNEL_CH4
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_TIM_OCMODE_FROZEN
+ * @arg @ref LL_TIM_OCMODE_ACTIVE
+ * @arg @ref LL_TIM_OCMODE_INACTIVE
+ * @arg @ref LL_TIM_OCMODE_TOGGLE
+ * @arg @ref LL_TIM_OCMODE_FORCED_INACTIVE
+ * @arg @ref LL_TIM_OCMODE_FORCED_ACTIVE
+ * @arg @ref LL_TIM_OCMODE_PWM1
+ * @arg @ref LL_TIM_OCMODE_PWM2
+ */
+__STATIC_INLINE uint32_t LL_TIM_OC_GetMode(TIM_TypeDef *TIMx, uint32_t Channel)
+{
+ register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
+ register const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
+ return (READ_BIT(*pReg, ((TIM_CCMR1_OC1M | TIM_CCMR1_CC1S) << SHIFT_TAB_OCxx[iChannel])) >> SHIFT_TAB_OCxx[iChannel]);
+}
+
+/**
+ * @brief Set the polarity of an output channel.
+ * @rmtoll CCER CC1P LL_TIM_OC_SetPolarity\n
+ * CCER CC1NP LL_TIM_OC_SetPolarity\n
+ * CCER CC2P LL_TIM_OC_SetPolarity\n
+ * CCER CC2NP LL_TIM_OC_SetPolarity\n
+ * CCER CC3P LL_TIM_OC_SetPolarity\n
+ * CCER CC3NP LL_TIM_OC_SetPolarity\n
+ * CCER CC4P LL_TIM_OC_SetPolarity
+ * @param TIMx Timer instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_TIM_CHANNEL_CH1
+ * @arg @ref LL_TIM_CHANNEL_CH1N
+ * @arg @ref LL_TIM_CHANNEL_CH2
+ * @arg @ref LL_TIM_CHANNEL_CH2N
+ * @arg @ref LL_TIM_CHANNEL_CH3
+ * @arg @ref LL_TIM_CHANNEL_CH3N
+ * @arg @ref LL_TIM_CHANNEL_CH4
+ * @param Polarity This parameter can be one of the following values:
+ * @arg @ref LL_TIM_OCPOLARITY_HIGH
+ * @arg @ref LL_TIM_OCPOLARITY_LOW
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_OC_SetPolarity(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t Polarity)
+{
+ register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
+ MODIFY_REG(TIMx->CCER, (TIM_CCER_CC1P << SHIFT_TAB_CCxP[iChannel]), Polarity << SHIFT_TAB_CCxP[iChannel]);
+}
+
+/**
+ * @brief Get the polarity of an output channel.
+ * @rmtoll CCER CC1P LL_TIM_OC_GetPolarity\n
+ * CCER CC1NP LL_TIM_OC_GetPolarity\n
+ * CCER CC2P LL_TIM_OC_GetPolarity\n
+ * CCER CC2NP LL_TIM_OC_GetPolarity\n
+ * CCER CC3P LL_TIM_OC_GetPolarity\n
+ * CCER CC3NP LL_TIM_OC_GetPolarity\n
+ * CCER CC4P LL_TIM_OC_GetPolarity
+ * @param TIMx Timer instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_TIM_CHANNEL_CH1
+ * @arg @ref LL_TIM_CHANNEL_CH1N
+ * @arg @ref LL_TIM_CHANNEL_CH2
+ * @arg @ref LL_TIM_CHANNEL_CH2N
+ * @arg @ref LL_TIM_CHANNEL_CH3
+ * @arg @ref LL_TIM_CHANNEL_CH3N
+ * @arg @ref LL_TIM_CHANNEL_CH4
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_TIM_OCPOLARITY_HIGH
+ * @arg @ref LL_TIM_OCPOLARITY_LOW
+ */
+__STATIC_INLINE uint32_t LL_TIM_OC_GetPolarity(TIM_TypeDef *TIMx, uint32_t Channel)
+{
+ register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
+ return (READ_BIT(TIMx->CCER, (TIM_CCER_CC1P << SHIFT_TAB_CCxP[iChannel])) >> SHIFT_TAB_CCxP[iChannel]);
+}
+
+/**
+ * @brief Set the IDLE state of an output channel
+ * @note This function is significant only for the timer instances
+ * supporting the break feature. Macro IS_TIM_BREAK_INSTANCE(TIMx)
+ * can be used to check whether or not a timer instance provides
+ * a break input.
+ * @rmtoll CR2 OIS1 LL_TIM_OC_SetIdleState\n
+ * CR2 OIS1N LL_TIM_OC_SetIdleState\n
+ * CR2 OIS2 LL_TIM_OC_SetIdleState\n
+ * CR2 OIS2N LL_TIM_OC_SetIdleState\n
+ * CR2 OIS3 LL_TIM_OC_SetIdleState\n
+ * CR2 OIS3N LL_TIM_OC_SetIdleState\n
+ * CR2 OIS4 LL_TIM_OC_SetIdleState
+ * @param TIMx Timer instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_TIM_CHANNEL_CH1
+ * @arg @ref LL_TIM_CHANNEL_CH1N
+ * @arg @ref LL_TIM_CHANNEL_CH2
+ * @arg @ref LL_TIM_CHANNEL_CH2N
+ * @arg @ref LL_TIM_CHANNEL_CH3
+ * @arg @ref LL_TIM_CHANNEL_CH3N
+ * @arg @ref LL_TIM_CHANNEL_CH4
+ * @param IdleState This parameter can be one of the following values:
+ * @arg @ref LL_TIM_OCIDLESTATE_LOW
+ * @arg @ref LL_TIM_OCIDLESTATE_HIGH
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_OC_SetIdleState(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t IdleState)
+{
+ register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
+ MODIFY_REG(TIMx->CR2, (TIM_CR2_OIS1 << SHIFT_TAB_OISx[iChannel]), IdleState << SHIFT_TAB_OISx[iChannel]);
+}
+
+/**
+ * @brief Get the IDLE state of an output channel
+ * @rmtoll CR2 OIS1 LL_TIM_OC_GetIdleState\n
+ * CR2 OIS1N LL_TIM_OC_GetIdleState\n
+ * CR2 OIS2 LL_TIM_OC_GetIdleState\n
+ * CR2 OIS2N LL_TIM_OC_GetIdleState\n
+ * CR2 OIS3 LL_TIM_OC_GetIdleState\n
+ * CR2 OIS3N LL_TIM_OC_GetIdleState\n
+ * CR2 OIS4 LL_TIM_OC_GetIdleState
+ * @param TIMx Timer instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_TIM_CHANNEL_CH1
+ * @arg @ref LL_TIM_CHANNEL_CH1N
+ * @arg @ref LL_TIM_CHANNEL_CH2
+ * @arg @ref LL_TIM_CHANNEL_CH2N
+ * @arg @ref LL_TIM_CHANNEL_CH3
+ * @arg @ref LL_TIM_CHANNEL_CH3N
+ * @arg @ref LL_TIM_CHANNEL_CH4
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_TIM_OCIDLESTATE_LOW
+ * @arg @ref LL_TIM_OCIDLESTATE_HIGH
+ */
+__STATIC_INLINE uint32_t LL_TIM_OC_GetIdleState(TIM_TypeDef *TIMx, uint32_t Channel)
+{
+ register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
+ return (READ_BIT(TIMx->CR2, (TIM_CR2_OIS1 << SHIFT_TAB_OISx[iChannel])) >> SHIFT_TAB_OISx[iChannel]);
+}
+
+/**
+ * @brief Enable fast mode for the output channel.
+ * @note Acts only if the channel is configured in PWM1 or PWM2 mode.
+ * @rmtoll CCMR1 OC1FE LL_TIM_OC_EnableFast\n
+ * CCMR1 OC2FE LL_TIM_OC_EnableFast\n
+ * CCMR2 OC3FE LL_TIM_OC_EnableFast\n
+ * CCMR2 OC4FE LL_TIM_OC_EnableFast
+ * @param TIMx Timer instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_TIM_CHANNEL_CH1
+ * @arg @ref LL_TIM_CHANNEL_CH2
+ * @arg @ref LL_TIM_CHANNEL_CH3
+ * @arg @ref LL_TIM_CHANNEL_CH4
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_OC_EnableFast(TIM_TypeDef *TIMx, uint32_t Channel)
+{
+ register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
+ register __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
+ SET_BIT(*pReg, (TIM_CCMR1_OC1FE << SHIFT_TAB_OCxx[iChannel]));
+
+}
+
+/**
+ * @brief Disable fast mode for the output channel.
+ * @rmtoll CCMR1 OC1FE LL_TIM_OC_DisableFast\n
+ * CCMR1 OC2FE LL_TIM_OC_DisableFast\n
+ * CCMR2 OC3FE LL_TIM_OC_DisableFast\n
+ * CCMR2 OC4FE LL_TIM_OC_DisableFast
+ * @param TIMx Timer instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_TIM_CHANNEL_CH1
+ * @arg @ref LL_TIM_CHANNEL_CH2
+ * @arg @ref LL_TIM_CHANNEL_CH3
+ * @arg @ref LL_TIM_CHANNEL_CH4
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_OC_DisableFast(TIM_TypeDef *TIMx, uint32_t Channel)
+{
+ register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
+ register __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
+ CLEAR_BIT(*pReg, (TIM_CCMR1_OC1FE << SHIFT_TAB_OCxx[iChannel]));
+
+}
+
+/**
+ * @brief Indicates whether fast mode is enabled for the output channel.
+ * @rmtoll CCMR1 OC1FE LL_TIM_OC_IsEnabledFast\n
+ * CCMR1 OC2FE LL_TIM_OC_IsEnabledFast\n
+ * CCMR2 OC3FE LL_TIM_OC_IsEnabledFast\n
+ * CCMR2 OC4FE LL_TIM_OC_IsEnabledFast\n
+ * @param TIMx Timer instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_TIM_CHANNEL_CH1
+ * @arg @ref LL_TIM_CHANNEL_CH2
+ * @arg @ref LL_TIM_CHANNEL_CH3
+ * @arg @ref LL_TIM_CHANNEL_CH4
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_OC_IsEnabledFast(TIM_TypeDef *TIMx, uint32_t Channel)
+{
+ register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
+ register const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
+ register uint32_t bitfield = TIM_CCMR1_OC1FE << SHIFT_TAB_OCxx[iChannel];
+ return ((READ_BIT(*pReg, bitfield) == bitfield) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Enable compare register (TIMx_CCRx) preload for the output channel.
+ * @rmtoll CCMR1 OC1PE LL_TIM_OC_EnablePreload\n
+ * CCMR1 OC2PE LL_TIM_OC_EnablePreload\n
+ * CCMR2 OC3PE LL_TIM_OC_EnablePreload\n
+ * CCMR2 OC4PE LL_TIM_OC_EnablePreload
+ * @param TIMx Timer instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_TIM_CHANNEL_CH1
+ * @arg @ref LL_TIM_CHANNEL_CH2
+ * @arg @ref LL_TIM_CHANNEL_CH3
+ * @arg @ref LL_TIM_CHANNEL_CH4
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_OC_EnablePreload(TIM_TypeDef *TIMx, uint32_t Channel)
+{
+ register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
+ register __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
+ SET_BIT(*pReg, (TIM_CCMR1_OC1PE << SHIFT_TAB_OCxx[iChannel]));
+}
+
+/**
+ * @brief Disable compare register (TIMx_CCRx) preload for the output channel.
+ * @rmtoll CCMR1 OC1PE LL_TIM_OC_DisablePreload\n
+ * CCMR1 OC2PE LL_TIM_OC_DisablePreload\n
+ * CCMR2 OC3PE LL_TIM_OC_DisablePreload\n
+ * CCMR2 OC4PE LL_TIM_OC_DisablePreload
+ * @param TIMx Timer instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_TIM_CHANNEL_CH1
+ * @arg @ref LL_TIM_CHANNEL_CH2
+ * @arg @ref LL_TIM_CHANNEL_CH3
+ * @arg @ref LL_TIM_CHANNEL_CH4
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_OC_DisablePreload(TIM_TypeDef *TIMx, uint32_t Channel)
+{
+ register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
+ register __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
+ CLEAR_BIT(*pReg, (TIM_CCMR1_OC1PE << SHIFT_TAB_OCxx[iChannel]));
+}
+
+/**
+ * @brief Indicates whether compare register (TIMx_CCRx) preload is enabled for the output channel.
+ * @rmtoll CCMR1 OC1PE LL_TIM_OC_IsEnabledPreload\n
+ * CCMR1 OC2PE LL_TIM_OC_IsEnabledPreload\n
+ * CCMR2 OC3PE LL_TIM_OC_IsEnabledPreload\n
+ * CCMR2 OC4PE LL_TIM_OC_IsEnabledPreload\n
+ * @param TIMx Timer instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_TIM_CHANNEL_CH1
+ * @arg @ref LL_TIM_CHANNEL_CH2
+ * @arg @ref LL_TIM_CHANNEL_CH3
+ * @arg @ref LL_TIM_CHANNEL_CH4
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_OC_IsEnabledPreload(TIM_TypeDef *TIMx, uint32_t Channel)
+{
+ register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
+ register const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
+ register uint32_t bitfield = TIM_CCMR1_OC1PE << SHIFT_TAB_OCxx[iChannel];
+ return ((READ_BIT(*pReg, bitfield) == bitfield) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Enable clearing the output channel on an external event.
+ * @note This function can only be used in Output compare and PWM modes. It does not work in Forced mode.
+ * @note Macro IS_TIM_OCXREF_CLEAR_INSTANCE(TIMx) can be used to check whether
+ * or not a timer instance can clear the OCxREF signal on an external event.
+ * @rmtoll CCMR1 OC1CE LL_TIM_OC_EnableClear\n
+ * CCMR1 OC2CE LL_TIM_OC_EnableClear\n
+ * CCMR2 OC3CE LL_TIM_OC_EnableClear\n
+ * CCMR2 OC4CE LL_TIM_OC_EnableClear
+ * @param TIMx Timer instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_TIM_CHANNEL_CH1
+ * @arg @ref LL_TIM_CHANNEL_CH2
+ * @arg @ref LL_TIM_CHANNEL_CH3
+ * @arg @ref LL_TIM_CHANNEL_CH4
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_OC_EnableClear(TIM_TypeDef *TIMx, uint32_t Channel)
+{
+ register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
+ register __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
+ SET_BIT(*pReg, (TIM_CCMR1_OC1CE << SHIFT_TAB_OCxx[iChannel]));
+}
+
+/**
+ * @brief Disable clearing the output channel on an external event.
+ * @note Macro IS_TIM_OCXREF_CLEAR_INSTANCE(TIMx) can be used to check whether
+ * or not a timer instance can clear the OCxREF signal on an external event.
+ * @rmtoll CCMR1 OC1CE LL_TIM_OC_DisableClear\n
+ * CCMR1 OC2CE LL_TIM_OC_DisableClear\n
+ * CCMR2 OC3CE LL_TIM_OC_DisableClear\n
+ * CCMR2 OC4CE LL_TIM_OC_DisableClear
+ * @param TIMx Timer instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_TIM_CHANNEL_CH1
+ * @arg @ref LL_TIM_CHANNEL_CH2
+ * @arg @ref LL_TIM_CHANNEL_CH3
+ * @arg @ref LL_TIM_CHANNEL_CH4
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_OC_DisableClear(TIM_TypeDef *TIMx, uint32_t Channel)
+{
+ register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
+ register __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
+ CLEAR_BIT(*pReg, (TIM_CCMR1_OC1CE << SHIFT_TAB_OCxx[iChannel]));
+}
+
+/**
+ * @brief Indicates clearing the output channel on an external event is enabled for the output channel.
+ * @note This function enables clearing the output channel on an external event.
+ * @note This function can only be used in Output compare and PWM modes. It does not work in Forced mode.
+ * @note Macro IS_TIM_OCXREF_CLEAR_INSTANCE(TIMx) can be used to check whether
+ * or not a timer instance can clear the OCxREF signal on an external event.
+ * @rmtoll CCMR1 OC1CE LL_TIM_OC_IsEnabledClear\n
+ * CCMR1 OC2CE LL_TIM_OC_IsEnabledClear\n
+ * CCMR2 OC3CE LL_TIM_OC_IsEnabledClear\n
+ * CCMR2 OC4CE LL_TIM_OC_IsEnabledClear\n
+ * @param TIMx Timer instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_TIM_CHANNEL_CH1
+ * @arg @ref LL_TIM_CHANNEL_CH2
+ * @arg @ref LL_TIM_CHANNEL_CH3
+ * @arg @ref LL_TIM_CHANNEL_CH4
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_OC_IsEnabledClear(TIM_TypeDef *TIMx, uint32_t Channel)
+{
+ register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
+ register const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
+ register uint32_t bitfield = TIM_CCMR1_OC1CE << SHIFT_TAB_OCxx[iChannel];
+ return ((READ_BIT(*pReg, bitfield) == bitfield) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Set the dead-time delay (delay inserted between the rising edge of the OCxREF signal and the rising edge of the Ocx and OCxN signals).
+ * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not
+ * dead-time insertion feature is supported by a timer instance.
+ * @note Helper macro @ref __LL_TIM_CALC_DEADTIME can be used to calculate the DeadTime parameter
+ * @rmtoll BDTR DTG LL_TIM_OC_SetDeadTime
+ * @param TIMx Timer instance
+ * @param DeadTime between Min_Data=0 and Max_Data=255
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_OC_SetDeadTime(TIM_TypeDef *TIMx, uint32_t DeadTime)
+{
+ MODIFY_REG(TIMx->BDTR, TIM_BDTR_DTG, DeadTime);
+}
+
+/**
+ * @brief Set compare value for output channel 1 (TIMx_CCR1).
+ * @note In 32-bit timer implementations compare value can be between 0x00000000 and 0xFFFFFFFF.
+ * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check
+ * whether or not a timer instance supports a 32 bits counter.
+ * @note Macro IS_TIM_CC1_INSTANCE(TIMx) can be used to check whether or not
+ * output channel 1 is supported by a timer instance.
+ * @rmtoll CCR1 CCR1 LL_TIM_OC_SetCompareCH1
+ * @param TIMx Timer instance
+ * @param CompareValue between Min_Data=0 and Max_Data=65535
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_OC_SetCompareCH1(TIM_TypeDef *TIMx, uint32_t CompareValue)
+{
+ WRITE_REG(TIMx->CCR1, CompareValue);
+}
+
+/**
+ * @brief Set compare value for output channel 2 (TIMx_CCR2).
+ * @note In 32-bit timer implementations compare value can be between 0x00000000 and 0xFFFFFFFF.
+ * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check
+ * whether or not a timer instance supports a 32 bits counter.
+ * @note Macro IS_TIM_CC2_INSTANCE(TIMx) can be used to check whether or not
+ * output channel 2 is supported by a timer instance.
+ * @rmtoll CCR2 CCR2 LL_TIM_OC_SetCompareCH2
+ * @param TIMx Timer instance
+ * @param CompareValue between Min_Data=0 and Max_Data=65535
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_OC_SetCompareCH2(TIM_TypeDef *TIMx, uint32_t CompareValue)
+{
+ WRITE_REG(TIMx->CCR2, CompareValue);
+}
+
+/**
+ * @brief Set compare value for output channel 3 (TIMx_CCR3).
+ * @note In 32-bit timer implementations compare value can be between 0x00000000 and 0xFFFFFFFF.
+ * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check
+ * whether or not a timer instance supports a 32 bits counter.
+ * @note Macro IS_TIM_CC3_INSTANCE(TIMx) can be used to check whether or not
+ * output channel is supported by a timer instance.
+ * @rmtoll CCR3 CCR3 LL_TIM_OC_SetCompareCH3
+ * @param TIMx Timer instance
+ * @param CompareValue between Min_Data=0 and Max_Data=65535
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_OC_SetCompareCH3(TIM_TypeDef *TIMx, uint32_t CompareValue)
+{
+ WRITE_REG(TIMx->CCR3, CompareValue);
+}
+
+/**
+ * @brief Set compare value for output channel 4 (TIMx_CCR4).
+ * @note In 32-bit timer implementations compare value can be between 0x00000000 and 0xFFFFFFFF.
+ * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check
+ * whether or not a timer instance supports a 32 bits counter.
+ * @note Macro IS_TIM_CC4_INSTANCE(TIMx) can be used to check whether or not
+ * output channel 4 is supported by a timer instance.
+ * @rmtoll CCR4 CCR4 LL_TIM_OC_SetCompareCH4
+ * @param TIMx Timer instance
+ * @param CompareValue between Min_Data=0 and Max_Data=65535
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_OC_SetCompareCH4(TIM_TypeDef *TIMx, uint32_t CompareValue)
+{
+ WRITE_REG(TIMx->CCR4, CompareValue);
+}
+
+/**
+ * @brief Get compare value (TIMx_CCR1) set for output channel 1.
+ * @note In 32-bit timer implementations returned compare value can be between 0x00000000 and 0xFFFFFFFF.
+ * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check
+ * whether or not a timer instance supports a 32 bits counter.
+ * @note Macro IS_TIM_CC1_INSTANCE(TIMx) can be used to check whether or not
+ * output channel 1 is supported by a timer instance.
+ * @rmtoll CCR1 CCR1 LL_TIM_OC_GetCompareCH1
+ * @param TIMx Timer instance
+ * @retval CompareValue (between Min_Data=0 and Max_Data=65535)
+ */
+__STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH1(TIM_TypeDef *TIMx)
+{
+ return (uint32_t)(READ_REG(TIMx->CCR1));
+}
+
+/**
+ * @brief Get compare value (TIMx_CCR2) set for output channel 2.
+ * @note In 32-bit timer implementations returned compare value can be between 0x00000000 and 0xFFFFFFFF.
+ * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check
+ * whether or not a timer instance supports a 32 bits counter.
+ * @note Macro IS_TIM_CC2_INSTANCE(TIMx) can be used to check whether or not
+ * output channel 2 is supported by a timer instance.
+ * @rmtoll CCR2 CCR2 LL_TIM_OC_GetCompareCH2
+ * @param TIMx Timer instance
+ * @retval CompareValue (between Min_Data=0 and Max_Data=65535)
+ */
+__STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH2(TIM_TypeDef *TIMx)
+{
+ return (uint32_t)(READ_REG(TIMx->CCR2));
+}
+
+/**
+ * @brief Get compare value (TIMx_CCR3) set for output channel 3.
+ * @note In 32-bit timer implementations returned compare value can be between 0x00000000 and 0xFFFFFFFF.
+ * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check
+ * whether or not a timer instance supports a 32 bits counter.
+ * @note Macro IS_TIM_CC3_INSTANCE(TIMx) can be used to check whether or not
+ * output channel 3 is supported by a timer instance.
+ * @rmtoll CCR3 CCR3 LL_TIM_OC_GetCompareCH3
+ * @param TIMx Timer instance
+ * @retval CompareValue (between Min_Data=0 and Max_Data=65535)
+ */
+__STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH3(TIM_TypeDef *TIMx)
+{
+ return (uint32_t)(READ_REG(TIMx->CCR3));
+}
+
+/**
+ * @brief Get compare value (TIMx_CCR4) set for output channel 4.
+ * @note In 32-bit timer implementations returned compare value can be between 0x00000000 and 0xFFFFFFFF.
+ * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check
+ * whether or not a timer instance supports a 32 bits counter.
+ * @note Macro IS_TIM_CC4_INSTANCE(TIMx) can be used to check whether or not
+ * output channel 4 is supported by a timer instance.
+ * @rmtoll CCR4 CCR4 LL_TIM_OC_GetCompareCH4
+ * @param TIMx Timer instance
+ * @retval CompareValue (between Min_Data=0 and Max_Data=65535)
+ */
+__STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH4(TIM_TypeDef *TIMx)
+{
+ return (uint32_t)(READ_REG(TIMx->CCR4));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EF_Input_Channel Input channel configuration
+ * @{
+ */
+/**
+ * @brief Configure input channel.
+ * @rmtoll CCMR1 CC1S LL_TIM_IC_Config\n
+ * CCMR1 IC1PSC LL_TIM_IC_Config\n
+ * CCMR1 IC1F LL_TIM_IC_Config\n
+ * CCMR1 CC2S LL_TIM_IC_Config\n
+ * CCMR1 IC2PSC LL_TIM_IC_Config\n
+ * CCMR1 IC2F LL_TIM_IC_Config\n
+ * CCMR2 CC3S LL_TIM_IC_Config\n
+ * CCMR2 IC3PSC LL_TIM_IC_Config\n
+ * CCMR2 IC3F LL_TIM_IC_Config\n
+ * CCMR2 CC4S LL_TIM_IC_Config\n
+ * CCMR2 IC4PSC LL_TIM_IC_Config\n
+ * CCMR2 IC4F LL_TIM_IC_Config\n
+ * CCER CC1P LL_TIM_IC_Config\n
+ * CCER CC1NP LL_TIM_IC_Config\n
+ * CCER CC2P LL_TIM_IC_Config\n
+ * CCER CC2NP LL_TIM_IC_Config\n
+ * CCER CC3P LL_TIM_IC_Config\n
+ * CCER CC3NP LL_TIM_IC_Config\n
+ * CCER CC4P LL_TIM_IC_Config\n
+ * CCER CC4NP LL_TIM_IC_Config
+ * @param TIMx Timer instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_TIM_CHANNEL_CH1
+ * @arg @ref LL_TIM_CHANNEL_CH2
+ * @arg @ref LL_TIM_CHANNEL_CH3
+ * @arg @ref LL_TIM_CHANNEL_CH4
+ * @param Configuration This parameter must be a combination of all the following values:
+ * @arg @ref LL_TIM_ACTIVEINPUT_DIRECTTI or @ref LL_TIM_ACTIVEINPUT_INDIRECTTI or @ref LL_TIM_ACTIVEINPUT_TRC
+ * @arg @ref LL_TIM_ICPSC_DIV1 or ... or @ref LL_TIM_ICPSC_DIV8
+ * @arg @ref LL_TIM_IC_FILTER_FDIV1 or ... or @ref LL_TIM_IC_FILTER_FDIV32_N8
+ * @arg @ref LL_TIM_IC_POLARITY_RISING or @ref LL_TIM_IC_POLARITY_FALLING or @ref LL_TIM_IC_POLARITY_BOTHEDGE
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_IC_Config(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t Configuration)
+{
+ register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
+ register __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
+ MODIFY_REG(*pReg, ((TIM_CCMR1_IC1F | TIM_CCMR1_IC1PSC | TIM_CCMR1_CC1S) << SHIFT_TAB_ICxx[iChannel]),
+ ((Configuration >> 16U) & (TIM_CCMR1_IC1F | TIM_CCMR1_IC1PSC | TIM_CCMR1_CC1S)) << SHIFT_TAB_ICxx[iChannel]);
+ MODIFY_REG(TIMx->CCER, ((TIM_CCER_CC1NP | TIM_CCER_CC1P) << SHIFT_TAB_CCxP[iChannel]),
+ (Configuration & (TIM_CCER_CC1NP | TIM_CCER_CC1P)) << SHIFT_TAB_CCxP[iChannel]);
+}
+
+/**
+ * @brief Set the active input.
+ * @rmtoll CCMR1 CC1S LL_TIM_IC_SetActiveInput\n
+ * CCMR1 CC2S LL_TIM_IC_SetActiveInput\n
+ * CCMR2 CC3S LL_TIM_IC_SetActiveInput\n
+ * CCMR2 CC4S LL_TIM_IC_SetActiveInput
+ * @param TIMx Timer instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_TIM_CHANNEL_CH1
+ * @arg @ref LL_TIM_CHANNEL_CH2
+ * @arg @ref LL_TIM_CHANNEL_CH3
+ * @arg @ref LL_TIM_CHANNEL_CH4
+ * @param ICActiveInput This parameter can be one of the following values:
+ * @arg @ref LL_TIM_ACTIVEINPUT_DIRECTTI
+ * @arg @ref LL_TIM_ACTIVEINPUT_INDIRECTTI
+ * @arg @ref LL_TIM_ACTIVEINPUT_TRC
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_IC_SetActiveInput(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ICActiveInput)
+{
+ register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
+ register __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
+ MODIFY_REG(*pReg, ((TIM_CCMR1_CC1S) << SHIFT_TAB_ICxx[iChannel]), (ICActiveInput >> 16U) << SHIFT_TAB_ICxx[iChannel]);
+}
+
+/**
+ * @brief Get the current active input.
+ * @rmtoll CCMR1 CC1S LL_TIM_IC_GetActiveInput\n
+ * CCMR1 CC2S LL_TIM_IC_GetActiveInput\n
+ * CCMR2 CC3S LL_TIM_IC_GetActiveInput\n
+ * CCMR2 CC4S LL_TIM_IC_GetActiveInput
+ * @param TIMx Timer instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_TIM_CHANNEL_CH1
+ * @arg @ref LL_TIM_CHANNEL_CH2
+ * @arg @ref LL_TIM_CHANNEL_CH3
+ * @arg @ref LL_TIM_CHANNEL_CH4
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_TIM_ACTIVEINPUT_DIRECTTI
+ * @arg @ref LL_TIM_ACTIVEINPUT_INDIRECTTI
+ * @arg @ref LL_TIM_ACTIVEINPUT_TRC
+ */
+__STATIC_INLINE uint32_t LL_TIM_IC_GetActiveInput(TIM_TypeDef *TIMx, uint32_t Channel)
+{
+ register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
+ register const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
+ return ((READ_BIT(*pReg, ((TIM_CCMR1_CC1S) << SHIFT_TAB_ICxx[iChannel])) >> SHIFT_TAB_ICxx[iChannel]) << 16U);
+}
+
+/**
+ * @brief Set the prescaler of input channel.
+ * @rmtoll CCMR1 IC1PSC LL_TIM_IC_SetPrescaler\n
+ * CCMR1 IC2PSC LL_TIM_IC_SetPrescaler\n
+ * CCMR2 IC3PSC LL_TIM_IC_SetPrescaler\n
+ * CCMR2 IC4PSC LL_TIM_IC_SetPrescaler
+ * @param TIMx Timer instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_TIM_CHANNEL_CH1
+ * @arg @ref LL_TIM_CHANNEL_CH2
+ * @arg @ref LL_TIM_CHANNEL_CH3
+ * @arg @ref LL_TIM_CHANNEL_CH4
+ * @param ICPrescaler This parameter can be one of the following values:
+ * @arg @ref LL_TIM_ICPSC_DIV1
+ * @arg @ref LL_TIM_ICPSC_DIV2
+ * @arg @ref LL_TIM_ICPSC_DIV4
+ * @arg @ref LL_TIM_ICPSC_DIV8
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_IC_SetPrescaler(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ICPrescaler)
+{
+ register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
+ register __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
+ MODIFY_REG(*pReg, ((TIM_CCMR1_IC1PSC) << SHIFT_TAB_ICxx[iChannel]), (ICPrescaler >> 16U) << SHIFT_TAB_ICxx[iChannel]);
+}
+
+/**
+ * @brief Get the current prescaler value acting on an input channel.
+ * @rmtoll CCMR1 IC1PSC LL_TIM_IC_GetPrescaler\n
+ * CCMR1 IC2PSC LL_TIM_IC_GetPrescaler\n
+ * CCMR2 IC3PSC LL_TIM_IC_GetPrescaler\n
+ * CCMR2 IC4PSC LL_TIM_IC_GetPrescaler
+ * @param TIMx Timer instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_TIM_CHANNEL_CH1
+ * @arg @ref LL_TIM_CHANNEL_CH2
+ * @arg @ref LL_TIM_CHANNEL_CH3
+ * @arg @ref LL_TIM_CHANNEL_CH4
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_TIM_ICPSC_DIV1
+ * @arg @ref LL_TIM_ICPSC_DIV2
+ * @arg @ref LL_TIM_ICPSC_DIV4
+ * @arg @ref LL_TIM_ICPSC_DIV8
+ */
+__STATIC_INLINE uint32_t LL_TIM_IC_GetPrescaler(TIM_TypeDef *TIMx, uint32_t Channel)
+{
+ register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
+ register const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
+ return ((READ_BIT(*pReg, ((TIM_CCMR1_IC1PSC) << SHIFT_TAB_ICxx[iChannel])) >> SHIFT_TAB_ICxx[iChannel]) << 16U);
+}
+
+/**
+ * @brief Set the input filter duration.
+ * @rmtoll CCMR1 IC1F LL_TIM_IC_SetFilter\n
+ * CCMR1 IC2F LL_TIM_IC_SetFilter\n
+ * CCMR2 IC3F LL_TIM_IC_SetFilter\n
+ * CCMR2 IC4F LL_TIM_IC_SetFilter
+ * @param TIMx Timer instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_TIM_CHANNEL_CH1
+ * @arg @ref LL_TIM_CHANNEL_CH2
+ * @arg @ref LL_TIM_CHANNEL_CH3
+ * @arg @ref LL_TIM_CHANNEL_CH4
+ * @param ICFilter This parameter can be one of the following values:
+ * @arg @ref LL_TIM_IC_FILTER_FDIV1
+ * @arg @ref LL_TIM_IC_FILTER_FDIV1_N2
+ * @arg @ref LL_TIM_IC_FILTER_FDIV1_N4
+ * @arg @ref LL_TIM_IC_FILTER_FDIV1_N8
+ * @arg @ref LL_TIM_IC_FILTER_FDIV2_N6
+ * @arg @ref LL_TIM_IC_FILTER_FDIV2_N8
+ * @arg @ref LL_TIM_IC_FILTER_FDIV4_N6
+ * @arg @ref LL_TIM_IC_FILTER_FDIV4_N8
+ * @arg @ref LL_TIM_IC_FILTER_FDIV8_N6
+ * @arg @ref LL_TIM_IC_FILTER_FDIV8_N8
+ * @arg @ref LL_TIM_IC_FILTER_FDIV16_N5
+ * @arg @ref LL_TIM_IC_FILTER_FDIV16_N6
+ * @arg @ref LL_TIM_IC_FILTER_FDIV16_N8
+ * @arg @ref LL_TIM_IC_FILTER_FDIV32_N5
+ * @arg @ref LL_TIM_IC_FILTER_FDIV32_N6
+ * @arg @ref LL_TIM_IC_FILTER_FDIV32_N8
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_IC_SetFilter(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ICFilter)
+{
+ register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
+ register __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
+ MODIFY_REG(*pReg, ((TIM_CCMR1_IC1F) << SHIFT_TAB_ICxx[iChannel]), (ICFilter >> 16U) << SHIFT_TAB_ICxx[iChannel]);
+}
+
+/**
+ * @brief Get the input filter duration.
+ * @rmtoll CCMR1 IC1F LL_TIM_IC_GetFilter\n
+ * CCMR1 IC2F LL_TIM_IC_GetFilter\n
+ * CCMR2 IC3F LL_TIM_IC_GetFilter\n
+ * CCMR2 IC4F LL_TIM_IC_GetFilter
+ * @param TIMx Timer instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_TIM_CHANNEL_CH1
+ * @arg @ref LL_TIM_CHANNEL_CH2
+ * @arg @ref LL_TIM_CHANNEL_CH3
+ * @arg @ref LL_TIM_CHANNEL_CH4
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_TIM_IC_FILTER_FDIV1
+ * @arg @ref LL_TIM_IC_FILTER_FDIV1_N2
+ * @arg @ref LL_TIM_IC_FILTER_FDIV1_N4
+ * @arg @ref LL_TIM_IC_FILTER_FDIV1_N8
+ * @arg @ref LL_TIM_IC_FILTER_FDIV2_N6
+ * @arg @ref LL_TIM_IC_FILTER_FDIV2_N8
+ * @arg @ref LL_TIM_IC_FILTER_FDIV4_N6
+ * @arg @ref LL_TIM_IC_FILTER_FDIV4_N8
+ * @arg @ref LL_TIM_IC_FILTER_FDIV8_N6
+ * @arg @ref LL_TIM_IC_FILTER_FDIV8_N8
+ * @arg @ref LL_TIM_IC_FILTER_FDIV16_N5
+ * @arg @ref LL_TIM_IC_FILTER_FDIV16_N6
+ * @arg @ref LL_TIM_IC_FILTER_FDIV16_N8
+ * @arg @ref LL_TIM_IC_FILTER_FDIV32_N5
+ * @arg @ref LL_TIM_IC_FILTER_FDIV32_N6
+ * @arg @ref LL_TIM_IC_FILTER_FDIV32_N8
+ */
+__STATIC_INLINE uint32_t LL_TIM_IC_GetFilter(TIM_TypeDef *TIMx, uint32_t Channel)
+{
+ register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
+ register const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
+ return ((READ_BIT(*pReg, ((TIM_CCMR1_IC1F) << SHIFT_TAB_ICxx[iChannel])) >> SHIFT_TAB_ICxx[iChannel]) << 16U);
+}
+
+/**
+ * @brief Set the input channel polarity.
+ * @rmtoll CCER CC1P LL_TIM_IC_SetPolarity\n
+ * CCER CC1NP LL_TIM_IC_SetPolarity\n
+ * CCER CC2P LL_TIM_IC_SetPolarity\n
+ * CCER CC2NP LL_TIM_IC_SetPolarity\n
+ * CCER CC3P LL_TIM_IC_SetPolarity\n
+ * CCER CC3NP LL_TIM_IC_SetPolarity\n
+ * CCER CC4P LL_TIM_IC_SetPolarity\n
+ * CCER CC4NP LL_TIM_IC_SetPolarity
+ * @param TIMx Timer instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_TIM_CHANNEL_CH1
+ * @arg @ref LL_TIM_CHANNEL_CH2
+ * @arg @ref LL_TIM_CHANNEL_CH3
+ * @arg @ref LL_TIM_CHANNEL_CH4
+ * @param ICPolarity This parameter can be one of the following values:
+ * @arg @ref LL_TIM_IC_POLARITY_RISING
+ * @arg @ref LL_TIM_IC_POLARITY_FALLING
+ * @arg @ref LL_TIM_IC_POLARITY_BOTHEDGE
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_IC_SetPolarity(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ICPolarity)
+{
+ register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
+ MODIFY_REG(TIMx->CCER, ((TIM_CCER_CC1NP | TIM_CCER_CC1P) << SHIFT_TAB_CCxP[iChannel]),
+ ICPolarity << SHIFT_TAB_CCxP[iChannel]);
+}
+
+/**
+ * @brief Get the current input channel polarity.
+ * @rmtoll CCER CC1P LL_TIM_IC_GetPolarity\n
+ * CCER CC1NP LL_TIM_IC_GetPolarity\n
+ * CCER CC2P LL_TIM_IC_GetPolarity\n
+ * CCER CC2NP LL_TIM_IC_GetPolarity\n
+ * CCER CC3P LL_TIM_IC_GetPolarity\n
+ * CCER CC3NP LL_TIM_IC_GetPolarity\n
+ * CCER CC4P LL_TIM_IC_GetPolarity\n
+ * CCER CC4NP LL_TIM_IC_GetPolarity
+ * @param TIMx Timer instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_TIM_CHANNEL_CH1
+ * @arg @ref LL_TIM_CHANNEL_CH2
+ * @arg @ref LL_TIM_CHANNEL_CH3
+ * @arg @ref LL_TIM_CHANNEL_CH4
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_TIM_IC_POLARITY_RISING
+ * @arg @ref LL_TIM_IC_POLARITY_FALLING
+ * @arg @ref LL_TIM_IC_POLARITY_BOTHEDGE
+ */
+__STATIC_INLINE uint32_t LL_TIM_IC_GetPolarity(TIM_TypeDef *TIMx, uint32_t Channel)
+{
+ register uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
+ return (READ_BIT(TIMx->CCER, ((TIM_CCER_CC1NP | TIM_CCER_CC1P) << SHIFT_TAB_CCxP[iChannel])) >>
+ SHIFT_TAB_CCxP[iChannel]);
+}
+
+/**
+ * @brief Connect the TIMx_CH1, CH2 and CH3 pins to the TI1 input (XOR combination).
+ * @note Macro IS_TIM_XOR_INSTANCE(TIMx) can be used to check whether or not
+ * a timer instance provides an XOR input.
+ * @rmtoll CR2 TI1S LL_TIM_IC_EnableXORCombination
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_IC_EnableXORCombination(TIM_TypeDef *TIMx)
+{
+ SET_BIT(TIMx->CR2, TIM_CR2_TI1S);
+}
+
+/**
+ * @brief Disconnect the TIMx_CH1, CH2 and CH3 pins from the TI1 input.
+ * @note Macro IS_TIM_XOR_INSTANCE(TIMx) can be used to check whether or not
+ * a timer instance provides an XOR input.
+ * @rmtoll CR2 TI1S LL_TIM_IC_DisableXORCombination
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_IC_DisableXORCombination(TIM_TypeDef *TIMx)
+{
+ CLEAR_BIT(TIMx->CR2, TIM_CR2_TI1S);
+}
+
+/**
+ * @brief Indicates whether the TIMx_CH1, CH2 and CH3 pins are connectected to the TI1 input.
+ * @note Macro IS_TIM_XOR_INSTANCE(TIMx) can be used to check whether or not
+ * a timer instance provides an XOR input.
+ * @rmtoll CR2 TI1S LL_TIM_IC_IsEnabledXORCombination
+ * @param TIMx Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_IC_IsEnabledXORCombination(TIM_TypeDef *TIMx)
+{
+ return ((READ_BIT(TIMx->CR2, TIM_CR2_TI1S) == (TIM_CR2_TI1S)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Get captured value for input channel 1.
+ * @note In 32-bit timer implementations returned captured value can be between 0x00000000 and 0xFFFFFFFF.
+ * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check
+ * whether or not a timer instance supports a 32 bits counter.
+ * @note Macro IS_TIM_CC1_INSTANCE(TIMx) can be used to check whether or not
+ * input channel 1 is supported by a timer instance.
+ * @rmtoll CCR1 CCR1 LL_TIM_IC_GetCaptureCH1
+ * @param TIMx Timer instance
+ * @retval CapturedValue (between Min_Data=0 and Max_Data=65535)
+ */
+__STATIC_INLINE uint32_t LL_TIM_IC_GetCaptureCH1(TIM_TypeDef *TIMx)
+{
+ return (uint32_t)(READ_REG(TIMx->CCR1));
+}
+
+/**
+ * @brief Get captured value for input channel 2.
+ * @note In 32-bit timer implementations returned captured value can be between 0x00000000 and 0xFFFFFFFF.
+ * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check
+ * whether or not a timer instance supports a 32 bits counter.
+ * @note Macro IS_TIM_CC2_INSTANCE(TIMx) can be used to check whether or not
+ * input channel 2 is supported by a timer instance.
+ * @rmtoll CCR2 CCR2 LL_TIM_IC_GetCaptureCH2
+ * @param TIMx Timer instance
+ * @retval CapturedValue (between Min_Data=0 and Max_Data=65535)
+ */
+__STATIC_INLINE uint32_t LL_TIM_IC_GetCaptureCH2(TIM_TypeDef *TIMx)
+{
+ return (uint32_t)(READ_REG(TIMx->CCR2));
+}
+
+/**
+ * @brief Get captured value for input channel 3.
+ * @note In 32-bit timer implementations returned captured value can be between 0x00000000 and 0xFFFFFFFF.
+ * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check
+ * whether or not a timer instance supports a 32 bits counter.
+ * @note Macro IS_TIM_CC3_INSTANCE(TIMx) can be used to check whether or not
+ * input channel 3 is supported by a timer instance.
+ * @rmtoll CCR3 CCR3 LL_TIM_IC_GetCaptureCH3
+ * @param TIMx Timer instance
+ * @retval CapturedValue (between Min_Data=0 and Max_Data=65535)
+ */
+__STATIC_INLINE uint32_t LL_TIM_IC_GetCaptureCH3(TIM_TypeDef *TIMx)
+{
+ return (uint32_t)(READ_REG(TIMx->CCR3));
+}
+
+/**
+ * @brief Get captured value for input channel 4.
+ * @note In 32-bit timer implementations returned captured value can be between 0x00000000 and 0xFFFFFFFF.
+ * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check
+ * whether or not a timer instance supports a 32 bits counter.
+ * @note Macro IS_TIM_CC4_INSTANCE(TIMx) can be used to check whether or not
+ * input channel 4 is supported by a timer instance.
+ * @rmtoll CCR4 CCR4 LL_TIM_IC_GetCaptureCH4
+ * @param TIMx Timer instance
+ * @retval CapturedValue (between Min_Data=0 and Max_Data=65535)
+ */
+__STATIC_INLINE uint32_t LL_TIM_IC_GetCaptureCH4(TIM_TypeDef *TIMx)
+{
+ return (uint32_t)(READ_REG(TIMx->CCR4));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EF_Clock_Selection Counter clock selection
+ * @{
+ */
+/**
+ * @brief Enable external clock mode 2.
+ * @note When external clock mode 2 is enabled the counter is clocked by any active edge on the ETRF signal.
+ * @note Macro IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(TIMx) can be used to check
+ * whether or not a timer instance supports external clock mode2.
+ * @rmtoll SMCR ECE LL_TIM_EnableExternalClock
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_EnableExternalClock(TIM_TypeDef *TIMx)
+{
+ SET_BIT(TIMx->SMCR, TIM_SMCR_ECE);
+}
+
+/**
+ * @brief Disable external clock mode 2.
+ * @note Macro IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(TIMx) can be used to check
+ * whether or not a timer instance supports external clock mode2.
+ * @rmtoll SMCR ECE LL_TIM_DisableExternalClock
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_DisableExternalClock(TIM_TypeDef *TIMx)
+{
+ CLEAR_BIT(TIMx->SMCR, TIM_SMCR_ECE);
+}
+
+/**
+ * @brief Indicate whether external clock mode 2 is enabled.
+ * @note Macro IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(TIMx) can be used to check
+ * whether or not a timer instance supports external clock mode2.
+ * @rmtoll SMCR ECE LL_TIM_IsEnabledExternalClock
+ * @param TIMx Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_IsEnabledExternalClock(TIM_TypeDef *TIMx)
+{
+ return ((READ_BIT(TIMx->SMCR, TIM_SMCR_ECE) == (TIM_SMCR_ECE)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Set the clock source of the counter clock.
+ * @note when selected clock source is external clock mode 1, the timer input
+ * the external clock is applied is selected by calling the @ref LL_TIM_SetTriggerInput()
+ * function. This timer input must be configured by calling
+ * the @ref LL_TIM_IC_Config() function.
+ * @note Macro IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(TIMx) can be used to check
+ * whether or not a timer instance supports external clock mode1.
+ * @note Macro IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(TIMx) can be used to check
+ * whether or not a timer instance supports external clock mode2.
+ * @rmtoll SMCR SMS LL_TIM_SetClockSource\n
+ * SMCR ECE LL_TIM_SetClockSource
+ * @param TIMx Timer instance
+ * @param ClockSource This parameter can be one of the following values:
+ * @arg @ref LL_TIM_CLOCKSOURCE_INTERNAL
+ * @arg @ref LL_TIM_CLOCKSOURCE_EXT_MODE1
+ * @arg @ref LL_TIM_CLOCKSOURCE_EXT_MODE2
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_SetClockSource(TIM_TypeDef *TIMx, uint32_t ClockSource)
+{
+ MODIFY_REG(TIMx->SMCR, TIM_SMCR_SMS | TIM_SMCR_ECE, ClockSource);
+}
+
+/**
+ * @brief Set the encoder interface mode.
+ * @note Macro IS_TIM_ENCODER_INTERFACE_INSTANCE(TIMx) can be used to check
+ * whether or not a timer instance supports the encoder mode.
+ * @rmtoll SMCR SMS LL_TIM_SetEncoderMode
+ * @param TIMx Timer instance
+ * @param EncoderMode This parameter can be one of the following values:
+ * @arg @ref LL_TIM_ENCODERMODE_X2_TI1
+ * @arg @ref LL_TIM_ENCODERMODE_X2_TI2
+ * @arg @ref LL_TIM_ENCODERMODE_X4_TI12
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_SetEncoderMode(TIM_TypeDef *TIMx, uint32_t EncoderMode)
+{
+ MODIFY_REG(TIMx->SMCR, TIM_SMCR_SMS, EncoderMode);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EF_Timer_Synchronization Timer synchronisation configuration
+ * @{
+ */
+/**
+ * @brief Set the trigger output (TRGO) used for timer synchronization .
+ * @note Macro IS_TIM_MASTER_INSTANCE(TIMx) can be used to check
+ * whether or not a timer instance can operate as a master timer.
+ * @rmtoll CR2 MMS LL_TIM_SetTriggerOutput
+ * @param TIMx Timer instance
+ * @param TimerSynchronization This parameter can be one of the following values:
+ * @arg @ref LL_TIM_TRGO_RESET
+ * @arg @ref LL_TIM_TRGO_ENABLE
+ * @arg @ref LL_TIM_TRGO_UPDATE
+ * @arg @ref LL_TIM_TRGO_CC1IF
+ * @arg @ref LL_TIM_TRGO_OC1REF
+ * @arg @ref LL_TIM_TRGO_OC2REF
+ * @arg @ref LL_TIM_TRGO_OC3REF
+ * @arg @ref LL_TIM_TRGO_OC4REF
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_SetTriggerOutput(TIM_TypeDef *TIMx, uint32_t TimerSynchronization)
+{
+ MODIFY_REG(TIMx->CR2, TIM_CR2_MMS, TimerSynchronization);
+}
+
+/**
+ * @brief Set the synchronization mode of a slave timer.
+ * @note Macro IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not
+ * a timer instance can operate as a slave timer.
+ * @rmtoll SMCR SMS LL_TIM_SetSlaveMode
+ * @param TIMx Timer instance
+ * @param SlaveMode This parameter can be one of the following values:
+ * @arg @ref LL_TIM_SLAVEMODE_DISABLED
+ * @arg @ref LL_TIM_SLAVEMODE_RESET
+ * @arg @ref LL_TIM_SLAVEMODE_GATED
+ * @arg @ref LL_TIM_SLAVEMODE_TRIGGER
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_SetSlaveMode(TIM_TypeDef *TIMx, uint32_t SlaveMode)
+{
+ MODIFY_REG(TIMx->SMCR, TIM_SMCR_SMS, SlaveMode);
+}
+
+/**
+ * @brief Set the selects the trigger input to be used to synchronize the counter.
+ * @note Macro IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not
+ * a timer instance can operate as a slave timer.
+ * @rmtoll SMCR TS LL_TIM_SetTriggerInput
+ * @param TIMx Timer instance
+ * @param TriggerInput This parameter can be one of the following values:
+ * @arg @ref LL_TIM_TS_ITR0
+ * @arg @ref LL_TIM_TS_ITR1
+ * @arg @ref LL_TIM_TS_ITR2
+ * @arg @ref LL_TIM_TS_ITR3
+ * @arg @ref LL_TIM_TS_TI1F_ED
+ * @arg @ref LL_TIM_TS_TI1FP1
+ * @arg @ref LL_TIM_TS_TI2FP2
+ * @arg @ref LL_TIM_TS_ETRF
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_SetTriggerInput(TIM_TypeDef *TIMx, uint32_t TriggerInput)
+{
+ MODIFY_REG(TIMx->SMCR, TIM_SMCR_TS, TriggerInput);
+}
+
+/**
+ * @brief Enable the Master/Slave mode.
+ * @note Macro IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not
+ * a timer instance can operate as a slave timer.
+ * @rmtoll SMCR MSM LL_TIM_EnableMasterSlaveMode
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_EnableMasterSlaveMode(TIM_TypeDef *TIMx)
+{
+ SET_BIT(TIMx->SMCR, TIM_SMCR_MSM);
+}
+
+/**
+ * @brief Disable the Master/Slave mode.
+ * @note Macro IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not
+ * a timer instance can operate as a slave timer.
+ * @rmtoll SMCR MSM LL_TIM_DisableMasterSlaveMode
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_DisableMasterSlaveMode(TIM_TypeDef *TIMx)
+{
+ CLEAR_BIT(TIMx->SMCR, TIM_SMCR_MSM);
+}
+
+/**
+ * @brief Indicates whether the Master/Slave mode is enabled.
+ * @note Macro IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not
+ * a timer instance can operate as a slave timer.
+ * @rmtoll SMCR MSM LL_TIM_IsEnabledMasterSlaveMode
+ * @param TIMx Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_IsEnabledMasterSlaveMode(TIM_TypeDef *TIMx)
+{
+ return ((READ_BIT(TIMx->SMCR, TIM_SMCR_MSM) == (TIM_SMCR_MSM)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Configure the external trigger (ETR) input.
+ * @note Macro IS_TIM_ETR_INSTANCE(TIMx) can be used to check whether or not
+ * a timer instance provides an external trigger input.
+ * @rmtoll SMCR ETP LL_TIM_ConfigETR\n
+ * SMCR ETPS LL_TIM_ConfigETR\n
+ * SMCR ETF LL_TIM_ConfigETR
+ * @param TIMx Timer instance
+ * @param ETRPolarity This parameter can be one of the following values:
+ * @arg @ref LL_TIM_ETR_POLARITY_NONINVERTED
+ * @arg @ref LL_TIM_ETR_POLARITY_INVERTED
+ * @param ETRPrescaler This parameter can be one of the following values:
+ * @arg @ref LL_TIM_ETR_PRESCALER_DIV1
+ * @arg @ref LL_TIM_ETR_PRESCALER_DIV2
+ * @arg @ref LL_TIM_ETR_PRESCALER_DIV4
+ * @arg @ref LL_TIM_ETR_PRESCALER_DIV8
+ * @param ETRFilter This parameter can be one of the following values:
+ * @arg @ref LL_TIM_ETR_FILTER_FDIV1
+ * @arg @ref LL_TIM_ETR_FILTER_FDIV1_N2
+ * @arg @ref LL_TIM_ETR_FILTER_FDIV1_N4
+ * @arg @ref LL_TIM_ETR_FILTER_FDIV1_N8
+ * @arg @ref LL_TIM_ETR_FILTER_FDIV2_N6
+ * @arg @ref LL_TIM_ETR_FILTER_FDIV2_N8
+ * @arg @ref LL_TIM_ETR_FILTER_FDIV4_N6
+ * @arg @ref LL_TIM_ETR_FILTER_FDIV4_N8
+ * @arg @ref LL_TIM_ETR_FILTER_FDIV8_N6
+ * @arg @ref LL_TIM_ETR_FILTER_FDIV8_N8
+ * @arg @ref LL_TIM_ETR_FILTER_FDIV16_N5
+ * @arg @ref LL_TIM_ETR_FILTER_FDIV16_N6
+ * @arg @ref LL_TIM_ETR_FILTER_FDIV16_N8
+ * @arg @ref LL_TIM_ETR_FILTER_FDIV32_N5
+ * @arg @ref LL_TIM_ETR_FILTER_FDIV32_N6
+ * @arg @ref LL_TIM_ETR_FILTER_FDIV32_N8
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_ConfigETR(TIM_TypeDef *TIMx, uint32_t ETRPolarity, uint32_t ETRPrescaler,
+ uint32_t ETRFilter)
+{
+ MODIFY_REG(TIMx->SMCR, TIM_SMCR_ETP | TIM_SMCR_ETPS | TIM_SMCR_ETF, ETRPolarity | ETRPrescaler | ETRFilter);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EF_Break_Function Break function configuration
+ * @{
+ */
+/**
+ * @brief Enable the break function.
+ * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not
+ * a timer instance provides a break input.
+ * @rmtoll BDTR BKE LL_TIM_EnableBRK
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_EnableBRK(TIM_TypeDef *TIMx)
+{
+ __IO uint32_t tmpreg;
+ SET_BIT(TIMx->BDTR, TIM_BDTR_BKE);
+ /* Note: Any write operation to this bit takes a delay of 1 APB clock cycle to become effective. */
+ tmpreg = READ_REG(TIMx->BDTR);
+ (void)(tmpreg);
+}
+
+/**
+ * @brief Disable the break function.
+ * @rmtoll BDTR BKE LL_TIM_DisableBRK
+ * @param TIMx Timer instance
+ * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not
+ * a timer instance provides a break input.
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_DisableBRK(TIM_TypeDef *TIMx)
+{
+ __IO uint32_t tmpreg;
+ CLEAR_BIT(TIMx->BDTR, TIM_BDTR_BKE);
+ /* Note: Any write operation to this bit takes a delay of 1 APB clock cycle to become effective. */
+ tmpreg = READ_REG(TIMx->BDTR);
+ (void)(tmpreg);
+}
+
+/**
+ * @brief Configure the break input.
+ * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not
+ * a timer instance provides a break input.
+ * @rmtoll BDTR BKP LL_TIM_ConfigBRK
+ * @param TIMx Timer instance
+ * @param BreakPolarity This parameter can be one of the following values:
+ * @arg @ref LL_TIM_BREAK_POLARITY_LOW
+ * @arg @ref LL_TIM_BREAK_POLARITY_HIGH
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_ConfigBRK(TIM_TypeDef *TIMx, uint32_t BreakPolarity)
+{
+ __IO uint32_t tmpreg;
+ MODIFY_REG(TIMx->BDTR, TIM_BDTR_BKP, BreakPolarity);
+ /* Note: Any write operation to BKP bit takes a delay of 1 APB clock cycle to become effective. */
+ tmpreg = READ_REG(TIMx->BDTR);
+ (void)(tmpreg);
+}
+
+/**
+ * @brief Select the outputs off state (enabled v.s. disabled) in Idle and Run modes.
+ * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not
+ * a timer instance provides a break input.
+ * @rmtoll BDTR OSSI LL_TIM_SetOffStates\n
+ * BDTR OSSR LL_TIM_SetOffStates
+ * @param TIMx Timer instance
+ * @param OffStateIdle This parameter can be one of the following values:
+ * @arg @ref LL_TIM_OSSI_DISABLE
+ * @arg @ref LL_TIM_OSSI_ENABLE
+ * @param OffStateRun This parameter can be one of the following values:
+ * @arg @ref LL_TIM_OSSR_DISABLE
+ * @arg @ref LL_TIM_OSSR_ENABLE
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_SetOffStates(TIM_TypeDef *TIMx, uint32_t OffStateIdle, uint32_t OffStateRun)
+{
+ MODIFY_REG(TIMx->BDTR, TIM_BDTR_OSSI | TIM_BDTR_OSSR, OffStateIdle | OffStateRun);
+}
+
+/**
+ * @brief Enable automatic output (MOE can be set by software or automatically when a break input is active).
+ * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not
+ * a timer instance provides a break input.
+ * @rmtoll BDTR AOE LL_TIM_EnableAutomaticOutput
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_EnableAutomaticOutput(TIM_TypeDef *TIMx)
+{
+ SET_BIT(TIMx->BDTR, TIM_BDTR_AOE);
+}
+
+/**
+ * @brief Disable automatic output (MOE can be set only by software).
+ * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not
+ * a timer instance provides a break input.
+ * @rmtoll BDTR AOE LL_TIM_DisableAutomaticOutput
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_DisableAutomaticOutput(TIM_TypeDef *TIMx)
+{
+ CLEAR_BIT(TIMx->BDTR, TIM_BDTR_AOE);
+}
+
+/**
+ * @brief Indicate whether automatic output is enabled.
+ * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not
+ * a timer instance provides a break input.
+ * @rmtoll BDTR AOE LL_TIM_IsEnabledAutomaticOutput
+ * @param TIMx Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_IsEnabledAutomaticOutput(TIM_TypeDef *TIMx)
+{
+ return ((READ_BIT(TIMx->BDTR, TIM_BDTR_AOE) == (TIM_BDTR_AOE)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Enable the outputs (set the MOE bit in TIMx_BDTR register).
+ * @note The MOE bit in TIMx_BDTR register allows to enable /disable the outputs by
+ * software and is reset in case of break or break2 event
+ * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not
+ * a timer instance provides a break input.
+ * @rmtoll BDTR MOE LL_TIM_EnableAllOutputs
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_EnableAllOutputs(TIM_TypeDef *TIMx)
+{
+ SET_BIT(TIMx->BDTR, TIM_BDTR_MOE);
+}
+
+/**
+ * @brief Disable the outputs (reset the MOE bit in TIMx_BDTR register).
+ * @note The MOE bit in TIMx_BDTR register allows to enable /disable the outputs by
+ * software and is reset in case of break or break2 event.
+ * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not
+ * a timer instance provides a break input.
+ * @rmtoll BDTR MOE LL_TIM_DisableAllOutputs
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_DisableAllOutputs(TIM_TypeDef *TIMx)
+{
+ CLEAR_BIT(TIMx->BDTR, TIM_BDTR_MOE);
+}
+
+/**
+ * @brief Indicates whether outputs are enabled.
+ * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not
+ * a timer instance provides a break input.
+ * @rmtoll BDTR MOE LL_TIM_IsEnabledAllOutputs
+ * @param TIMx Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_IsEnabledAllOutputs(TIM_TypeDef *TIMx)
+{
+ return ((READ_BIT(TIMx->BDTR, TIM_BDTR_MOE) == (TIM_BDTR_MOE)) ? 1UL : 0UL);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EF_DMA_Burst_Mode DMA burst mode configuration
+ * @{
+ */
+/**
+ * @brief Configures the timer DMA burst feature.
+ * @note Macro IS_TIM_DMABURST_INSTANCE(TIMx) can be used to check whether or
+ * not a timer instance supports the DMA burst mode.
+ * @rmtoll DCR DBL LL_TIM_ConfigDMABurst\n
+ * DCR DBA LL_TIM_ConfigDMABurst
+ * @param TIMx Timer instance
+ * @param DMABurstBaseAddress This parameter can be one of the following values:
+ * @arg @ref LL_TIM_DMABURST_BASEADDR_CR1
+ * @arg @ref LL_TIM_DMABURST_BASEADDR_CR2
+ * @arg @ref LL_TIM_DMABURST_BASEADDR_SMCR
+ * @arg @ref LL_TIM_DMABURST_BASEADDR_DIER
+ * @arg @ref LL_TIM_DMABURST_BASEADDR_SR
+ * @arg @ref LL_TIM_DMABURST_BASEADDR_EGR
+ * @arg @ref LL_TIM_DMABURST_BASEADDR_CCMR1
+ * @arg @ref LL_TIM_DMABURST_BASEADDR_CCMR2
+ * @arg @ref LL_TIM_DMABURST_BASEADDR_CCER
+ * @arg @ref LL_TIM_DMABURST_BASEADDR_CNT
+ * @arg @ref LL_TIM_DMABURST_BASEADDR_PSC
+ * @arg @ref LL_TIM_DMABURST_BASEADDR_ARR
+ * @arg @ref LL_TIM_DMABURST_BASEADDR_RCR
+ * @arg @ref LL_TIM_DMABURST_BASEADDR_CCR1
+ * @arg @ref LL_TIM_DMABURST_BASEADDR_CCR2
+ * @arg @ref LL_TIM_DMABURST_BASEADDR_CCR3
+ * @arg @ref LL_TIM_DMABURST_BASEADDR_CCR4
+ * @arg @ref LL_TIM_DMABURST_BASEADDR_BDTR
+ * @param DMABurstLength This parameter can be one of the following values:
+ * @arg @ref LL_TIM_DMABURST_LENGTH_1TRANSFER
+ * @arg @ref LL_TIM_DMABURST_LENGTH_2TRANSFERS
+ * @arg @ref LL_TIM_DMABURST_LENGTH_3TRANSFERS
+ * @arg @ref LL_TIM_DMABURST_LENGTH_4TRANSFERS
+ * @arg @ref LL_TIM_DMABURST_LENGTH_5TRANSFERS
+ * @arg @ref LL_TIM_DMABURST_LENGTH_6TRANSFERS
+ * @arg @ref LL_TIM_DMABURST_LENGTH_7TRANSFERS
+ * @arg @ref LL_TIM_DMABURST_LENGTH_8TRANSFERS
+ * @arg @ref LL_TIM_DMABURST_LENGTH_9TRANSFERS
+ * @arg @ref LL_TIM_DMABURST_LENGTH_10TRANSFERS
+ * @arg @ref LL_TIM_DMABURST_LENGTH_11TRANSFERS
+ * @arg @ref LL_TIM_DMABURST_LENGTH_12TRANSFERS
+ * @arg @ref LL_TIM_DMABURST_LENGTH_13TRANSFERS
+ * @arg @ref LL_TIM_DMABURST_LENGTH_14TRANSFERS
+ * @arg @ref LL_TIM_DMABURST_LENGTH_15TRANSFERS
+ * @arg @ref LL_TIM_DMABURST_LENGTH_16TRANSFERS
+ * @arg @ref LL_TIM_DMABURST_LENGTH_17TRANSFERS
+ * @arg @ref LL_TIM_DMABURST_LENGTH_18TRANSFERS
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_ConfigDMABurst(TIM_TypeDef *TIMx, uint32_t DMABurstBaseAddress, uint32_t DMABurstLength)
+{
+ MODIFY_REG(TIMx->DCR, (TIM_DCR_DBL | TIM_DCR_DBA), (DMABurstBaseAddress | DMABurstLength));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EF_Timer_Inputs_Remapping Timer input remapping
+ * @{
+ */
+/**
+ * @brief Remap TIM inputs (input channel, internal/external triggers).
+ * @note Macro IS_TIM_REMAP_INSTANCE(TIMx) can be used to check whether or not
+ * a some timer inputs can be remapped.
+ * @rmtoll TIM14_OR TI1_RMP LL_TIM_SetRemap
+ * @param TIMx Timer instance
+ * @param Remap This parameter can be one of the following values:
+ * @arg @ref LL_TIM_TIM14_TI1_RMP_GPIO
+ * @arg @ref LL_TIM_TIM14_TI1_RMP_RTC_CLK
+ * @arg @ref LL_TIM_TIM14_TI1_RMP_HSE
+ * @arg @ref LL_TIM_TIM14_TI1_RMP_MCO
+ *
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_SetRemap(TIM_TypeDef *TIMx, uint32_t Remap)
+{
+ MODIFY_REG(TIMx->OR, (Remap >> TIMx_OR_RMP_SHIFT), (Remap & TIMx_OR_RMP_MASK));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EF_OCREF_Clear OCREF_Clear_Management
+ * @{
+ */
+/**
+ * @brief Set the OCREF clear input source
+ * @note The OCxREF signal of a given channel can be cleared when a high level is applied on the OCREF_CLR_INPUT
+ * @note This function can only be used in Output compare and PWM modes.
+ * @rmtoll SMCR OCCS LL_TIM_SetOCRefClearInputSource
+ * @param TIMx Timer instance
+ * @param OCRefClearInputSource This parameter can be one of the following values:
+ * @arg @ref LL_TIM_OCREF_CLR_INT_OCREF_CLR
+ * @arg @ref LL_TIM_OCREF_CLR_INT_ETR
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_SetOCRefClearInputSource(TIM_TypeDef *TIMx, uint32_t OCRefClearInputSource)
+{
+ MODIFY_REG(TIMx->SMCR, TIM_SMCR_OCCS, OCRefClearInputSource);
+}
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EF_FLAG_Management FLAG-Management
+ * @{
+ */
+/**
+ * @brief Clear the update interrupt flag (UIF).
+ * @rmtoll SR UIF LL_TIM_ClearFlag_UPDATE
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_ClearFlag_UPDATE(TIM_TypeDef *TIMx)
+{
+ WRITE_REG(TIMx->SR, ~(TIM_SR_UIF));
+}
+
+/**
+ * @brief Indicate whether update interrupt flag (UIF) is set (update interrupt is pending).
+ * @rmtoll SR UIF LL_TIM_IsActiveFlag_UPDATE
+ * @param TIMx Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_UPDATE(TIM_TypeDef *TIMx)
+{
+ return ((READ_BIT(TIMx->SR, TIM_SR_UIF) == (TIM_SR_UIF)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Clear the Capture/Compare 1 interrupt flag (CC1F).
+ * @rmtoll SR CC1IF LL_TIM_ClearFlag_CC1
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_ClearFlag_CC1(TIM_TypeDef *TIMx)
+{
+ WRITE_REG(TIMx->SR, ~(TIM_SR_CC1IF));
+}
+
+/**
+ * @brief Indicate whether Capture/Compare 1 interrupt flag (CC1F) is set (Capture/Compare 1 interrupt is pending).
+ * @rmtoll SR CC1IF LL_TIM_IsActiveFlag_CC1
+ * @param TIMx Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC1(TIM_TypeDef *TIMx)
+{
+ return ((READ_BIT(TIMx->SR, TIM_SR_CC1IF) == (TIM_SR_CC1IF)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Clear the Capture/Compare 2 interrupt flag (CC2F).
+ * @rmtoll SR CC2IF LL_TIM_ClearFlag_CC2
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_ClearFlag_CC2(TIM_TypeDef *TIMx)
+{
+ WRITE_REG(TIMx->SR, ~(TIM_SR_CC2IF));
+}
+
+/**
+ * @brief Indicate whether Capture/Compare 2 interrupt flag (CC2F) is set (Capture/Compare 2 interrupt is pending).
+ * @rmtoll SR CC2IF LL_TIM_IsActiveFlag_CC2
+ * @param TIMx Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC2(TIM_TypeDef *TIMx)
+{
+ return ((READ_BIT(TIMx->SR, TIM_SR_CC2IF) == (TIM_SR_CC2IF)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Clear the Capture/Compare 3 interrupt flag (CC3F).
+ * @rmtoll SR CC3IF LL_TIM_ClearFlag_CC3
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_ClearFlag_CC3(TIM_TypeDef *TIMx)
+{
+ WRITE_REG(TIMx->SR, ~(TIM_SR_CC3IF));
+}
+
+/**
+ * @brief Indicate whether Capture/Compare 3 interrupt flag (CC3F) is set (Capture/Compare 3 interrupt is pending).
+ * @rmtoll SR CC3IF LL_TIM_IsActiveFlag_CC3
+ * @param TIMx Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC3(TIM_TypeDef *TIMx)
+{
+ return ((READ_BIT(TIMx->SR, TIM_SR_CC3IF) == (TIM_SR_CC3IF)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Clear the Capture/Compare 4 interrupt flag (CC4F).
+ * @rmtoll SR CC4IF LL_TIM_ClearFlag_CC4
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_ClearFlag_CC4(TIM_TypeDef *TIMx)
+{
+ WRITE_REG(TIMx->SR, ~(TIM_SR_CC4IF));
+}
+
+/**
+ * @brief Indicate whether Capture/Compare 4 interrupt flag (CC4F) is set (Capture/Compare 4 interrupt is pending).
+ * @rmtoll SR CC4IF LL_TIM_IsActiveFlag_CC4
+ * @param TIMx Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC4(TIM_TypeDef *TIMx)
+{
+ return ((READ_BIT(TIMx->SR, TIM_SR_CC4IF) == (TIM_SR_CC4IF)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Clear the commutation interrupt flag (COMIF).
+ * @rmtoll SR COMIF LL_TIM_ClearFlag_COM
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_ClearFlag_COM(TIM_TypeDef *TIMx)
+{
+ WRITE_REG(TIMx->SR, ~(TIM_SR_COMIF));
+}
+
+/**
+ * @brief Indicate whether commutation interrupt flag (COMIF) is set (commutation interrupt is pending).
+ * @rmtoll SR COMIF LL_TIM_IsActiveFlag_COM
+ * @param TIMx Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_COM(TIM_TypeDef *TIMx)
+{
+ return ((READ_BIT(TIMx->SR, TIM_SR_COMIF) == (TIM_SR_COMIF)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Clear the trigger interrupt flag (TIF).
+ * @rmtoll SR TIF LL_TIM_ClearFlag_TRIG
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_ClearFlag_TRIG(TIM_TypeDef *TIMx)
+{
+ WRITE_REG(TIMx->SR, ~(TIM_SR_TIF));
+}
+
+/**
+ * @brief Indicate whether trigger interrupt flag (TIF) is set (trigger interrupt is pending).
+ * @rmtoll SR TIF LL_TIM_IsActiveFlag_TRIG
+ * @param TIMx Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_TRIG(TIM_TypeDef *TIMx)
+{
+ return ((READ_BIT(TIMx->SR, TIM_SR_TIF) == (TIM_SR_TIF)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Clear the break interrupt flag (BIF).
+ * @rmtoll SR BIF LL_TIM_ClearFlag_BRK
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_ClearFlag_BRK(TIM_TypeDef *TIMx)
+{
+ WRITE_REG(TIMx->SR, ~(TIM_SR_BIF));
+}
+
+/**
+ * @brief Indicate whether break interrupt flag (BIF) is set (break interrupt is pending).
+ * @rmtoll SR BIF LL_TIM_IsActiveFlag_BRK
+ * @param TIMx Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_BRK(TIM_TypeDef *TIMx)
+{
+ return ((READ_BIT(TIMx->SR, TIM_SR_BIF) == (TIM_SR_BIF)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Clear the Capture/Compare 1 over-capture interrupt flag (CC1OF).
+ * @rmtoll SR CC1OF LL_TIM_ClearFlag_CC1OVR
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_ClearFlag_CC1OVR(TIM_TypeDef *TIMx)
+{
+ WRITE_REG(TIMx->SR, ~(TIM_SR_CC1OF));
+}
+
+/**
+ * @brief Indicate whether Capture/Compare 1 over-capture interrupt flag (CC1OF) is set (Capture/Compare 1 interrupt is pending).
+ * @rmtoll SR CC1OF LL_TIM_IsActiveFlag_CC1OVR
+ * @param TIMx Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC1OVR(TIM_TypeDef *TIMx)
+{
+ return ((READ_BIT(TIMx->SR, TIM_SR_CC1OF) == (TIM_SR_CC1OF)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Clear the Capture/Compare 2 over-capture interrupt flag (CC2OF).
+ * @rmtoll SR CC2OF LL_TIM_ClearFlag_CC2OVR
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_ClearFlag_CC2OVR(TIM_TypeDef *TIMx)
+{
+ WRITE_REG(TIMx->SR, ~(TIM_SR_CC2OF));
+}
+
+/**
+ * @brief Indicate whether Capture/Compare 2 over-capture interrupt flag (CC2OF) is set (Capture/Compare 2 over-capture interrupt is pending).
+ * @rmtoll SR CC2OF LL_TIM_IsActiveFlag_CC2OVR
+ * @param TIMx Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC2OVR(TIM_TypeDef *TIMx)
+{
+ return ((READ_BIT(TIMx->SR, TIM_SR_CC2OF) == (TIM_SR_CC2OF)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Clear the Capture/Compare 3 over-capture interrupt flag (CC3OF).
+ * @rmtoll SR CC3OF LL_TIM_ClearFlag_CC3OVR
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_ClearFlag_CC3OVR(TIM_TypeDef *TIMx)
+{
+ WRITE_REG(TIMx->SR, ~(TIM_SR_CC3OF));
+}
+
+/**
+ * @brief Indicate whether Capture/Compare 3 over-capture interrupt flag (CC3OF) is set (Capture/Compare 3 over-capture interrupt is pending).
+ * @rmtoll SR CC3OF LL_TIM_IsActiveFlag_CC3OVR
+ * @param TIMx Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC3OVR(TIM_TypeDef *TIMx)
+{
+ return ((READ_BIT(TIMx->SR, TIM_SR_CC3OF) == (TIM_SR_CC3OF)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Clear the Capture/Compare 4 over-capture interrupt flag (CC4OF).
+ * @rmtoll SR CC4OF LL_TIM_ClearFlag_CC4OVR
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_ClearFlag_CC4OVR(TIM_TypeDef *TIMx)
+{
+ WRITE_REG(TIMx->SR, ~(TIM_SR_CC4OF));
+}
+
+/**
+ * @brief Indicate whether Capture/Compare 4 over-capture interrupt flag (CC4OF) is set (Capture/Compare 4 over-capture interrupt is pending).
+ * @rmtoll SR CC4OF LL_TIM_IsActiveFlag_CC4OVR
+ * @param TIMx Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC4OVR(TIM_TypeDef *TIMx)
+{
+ return ((READ_BIT(TIMx->SR, TIM_SR_CC4OF) == (TIM_SR_CC4OF)) ? 1UL : 0UL);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EF_IT_Management IT-Management
+ * @{
+ */
+/**
+ * @brief Enable update interrupt (UIE).
+ * @rmtoll DIER UIE LL_TIM_EnableIT_UPDATE
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_EnableIT_UPDATE(TIM_TypeDef *TIMx)
+{
+ SET_BIT(TIMx->DIER, TIM_DIER_UIE);
+}
+
+/**
+ * @brief Disable update interrupt (UIE).
+ * @rmtoll DIER UIE LL_TIM_DisableIT_UPDATE
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_DisableIT_UPDATE(TIM_TypeDef *TIMx)
+{
+ CLEAR_BIT(TIMx->DIER, TIM_DIER_UIE);
+}
+
+/**
+ * @brief Indicates whether the update interrupt (UIE) is enabled.
+ * @rmtoll DIER UIE LL_TIM_IsEnabledIT_UPDATE
+ * @param TIMx Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_UPDATE(TIM_TypeDef *TIMx)
+{
+ return ((READ_BIT(TIMx->DIER, TIM_DIER_UIE) == (TIM_DIER_UIE)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Enable capture/compare 1 interrupt (CC1IE).
+ * @rmtoll DIER CC1IE LL_TIM_EnableIT_CC1
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_EnableIT_CC1(TIM_TypeDef *TIMx)
+{
+ SET_BIT(TIMx->DIER, TIM_DIER_CC1IE);
+}
+
+/**
+ * @brief Disable capture/compare 1 interrupt (CC1IE).
+ * @rmtoll DIER CC1IE LL_TIM_DisableIT_CC1
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_DisableIT_CC1(TIM_TypeDef *TIMx)
+{
+ CLEAR_BIT(TIMx->DIER, TIM_DIER_CC1IE);
+}
+
+/**
+ * @brief Indicates whether the capture/compare 1 interrupt (CC1IE) is enabled.
+ * @rmtoll DIER CC1IE LL_TIM_IsEnabledIT_CC1
+ * @param TIMx Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_CC1(TIM_TypeDef *TIMx)
+{
+ return ((READ_BIT(TIMx->DIER, TIM_DIER_CC1IE) == (TIM_DIER_CC1IE)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Enable capture/compare 2 interrupt (CC2IE).
+ * @rmtoll DIER CC2IE LL_TIM_EnableIT_CC2
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_EnableIT_CC2(TIM_TypeDef *TIMx)
+{
+ SET_BIT(TIMx->DIER, TIM_DIER_CC2IE);
+}
+
+/**
+ * @brief Disable capture/compare 2 interrupt (CC2IE).
+ * @rmtoll DIER CC2IE LL_TIM_DisableIT_CC2
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_DisableIT_CC2(TIM_TypeDef *TIMx)
+{
+ CLEAR_BIT(TIMx->DIER, TIM_DIER_CC2IE);
+}
+
+/**
+ * @brief Indicates whether the capture/compare 2 interrupt (CC2IE) is enabled.
+ * @rmtoll DIER CC2IE LL_TIM_IsEnabledIT_CC2
+ * @param TIMx Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_CC2(TIM_TypeDef *TIMx)
+{
+ return ((READ_BIT(TIMx->DIER, TIM_DIER_CC2IE) == (TIM_DIER_CC2IE)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Enable capture/compare 3 interrupt (CC3IE).
+ * @rmtoll DIER CC3IE LL_TIM_EnableIT_CC3
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_EnableIT_CC3(TIM_TypeDef *TIMx)
+{
+ SET_BIT(TIMx->DIER, TIM_DIER_CC3IE);
+}
+
+/**
+ * @brief Disable capture/compare 3 interrupt (CC3IE).
+ * @rmtoll DIER CC3IE LL_TIM_DisableIT_CC3
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_DisableIT_CC3(TIM_TypeDef *TIMx)
+{
+ CLEAR_BIT(TIMx->DIER, TIM_DIER_CC3IE);
+}
+
+/**
+ * @brief Indicates whether the capture/compare 3 interrupt (CC3IE) is enabled.
+ * @rmtoll DIER CC3IE LL_TIM_IsEnabledIT_CC3
+ * @param TIMx Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_CC3(TIM_TypeDef *TIMx)
+{
+ return ((READ_BIT(TIMx->DIER, TIM_DIER_CC3IE) == (TIM_DIER_CC3IE)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Enable capture/compare 4 interrupt (CC4IE).
+ * @rmtoll DIER CC4IE LL_TIM_EnableIT_CC4
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_EnableIT_CC4(TIM_TypeDef *TIMx)
+{
+ SET_BIT(TIMx->DIER, TIM_DIER_CC4IE);
+}
+
+/**
+ * @brief Disable capture/compare 4 interrupt (CC4IE).
+ * @rmtoll DIER CC4IE LL_TIM_DisableIT_CC4
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_DisableIT_CC4(TIM_TypeDef *TIMx)
+{
+ CLEAR_BIT(TIMx->DIER, TIM_DIER_CC4IE);
+}
+
+/**
+ * @brief Indicates whether the capture/compare 4 interrupt (CC4IE) is enabled.
+ * @rmtoll DIER CC4IE LL_TIM_IsEnabledIT_CC4
+ * @param TIMx Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_CC4(TIM_TypeDef *TIMx)
+{
+ return ((READ_BIT(TIMx->DIER, TIM_DIER_CC4IE) == (TIM_DIER_CC4IE)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Enable commutation interrupt (COMIE).
+ * @rmtoll DIER COMIE LL_TIM_EnableIT_COM
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_EnableIT_COM(TIM_TypeDef *TIMx)
+{
+ SET_BIT(TIMx->DIER, TIM_DIER_COMIE);
+}
+
+/**
+ * @brief Disable commutation interrupt (COMIE).
+ * @rmtoll DIER COMIE LL_TIM_DisableIT_COM
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_DisableIT_COM(TIM_TypeDef *TIMx)
+{
+ CLEAR_BIT(TIMx->DIER, TIM_DIER_COMIE);
+}
+
+/**
+ * @brief Indicates whether the commutation interrupt (COMIE) is enabled.
+ * @rmtoll DIER COMIE LL_TIM_IsEnabledIT_COM
+ * @param TIMx Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_COM(TIM_TypeDef *TIMx)
+{
+ return ((READ_BIT(TIMx->DIER, TIM_DIER_COMIE) == (TIM_DIER_COMIE)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Enable trigger interrupt (TIE).
+ * @rmtoll DIER TIE LL_TIM_EnableIT_TRIG
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_EnableIT_TRIG(TIM_TypeDef *TIMx)
+{
+ SET_BIT(TIMx->DIER, TIM_DIER_TIE);
+}
+
+/**
+ * @brief Disable trigger interrupt (TIE).
+ * @rmtoll DIER TIE LL_TIM_DisableIT_TRIG
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_DisableIT_TRIG(TIM_TypeDef *TIMx)
+{
+ CLEAR_BIT(TIMx->DIER, TIM_DIER_TIE);
+}
+
+/**
+ * @brief Indicates whether the trigger interrupt (TIE) is enabled.
+ * @rmtoll DIER TIE LL_TIM_IsEnabledIT_TRIG
+ * @param TIMx Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_TRIG(TIM_TypeDef *TIMx)
+{
+ return ((READ_BIT(TIMx->DIER, TIM_DIER_TIE) == (TIM_DIER_TIE)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Enable break interrupt (BIE).
+ * @rmtoll DIER BIE LL_TIM_EnableIT_BRK
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_EnableIT_BRK(TIM_TypeDef *TIMx)
+{
+ SET_BIT(TIMx->DIER, TIM_DIER_BIE);
+}
+
+/**
+ * @brief Disable break interrupt (BIE).
+ * @rmtoll DIER BIE LL_TIM_DisableIT_BRK
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_DisableIT_BRK(TIM_TypeDef *TIMx)
+{
+ CLEAR_BIT(TIMx->DIER, TIM_DIER_BIE);
+}
+
+/**
+ * @brief Indicates whether the break interrupt (BIE) is enabled.
+ * @rmtoll DIER BIE LL_TIM_IsEnabledIT_BRK
+ * @param TIMx Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_BRK(TIM_TypeDef *TIMx)
+{
+ return ((READ_BIT(TIMx->DIER, TIM_DIER_BIE) == (TIM_DIER_BIE)) ? 1UL : 0UL);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EF_DMA_Management DMA-Management
+ * @{
+ */
+/**
+ * @brief Enable update DMA request (UDE).
+ * @rmtoll DIER UDE LL_TIM_EnableDMAReq_UPDATE
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_EnableDMAReq_UPDATE(TIM_TypeDef *TIMx)
+{
+ SET_BIT(TIMx->DIER, TIM_DIER_UDE);
+}
+
+/**
+ * @brief Disable update DMA request (UDE).
+ * @rmtoll DIER UDE LL_TIM_DisableDMAReq_UPDATE
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_DisableDMAReq_UPDATE(TIM_TypeDef *TIMx)
+{
+ CLEAR_BIT(TIMx->DIER, TIM_DIER_UDE);
+}
+
+/**
+ * @brief Indicates whether the update DMA request (UDE) is enabled.
+ * @rmtoll DIER UDE LL_TIM_IsEnabledDMAReq_UPDATE
+ * @param TIMx Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_UPDATE(TIM_TypeDef *TIMx)
+{
+ return ((READ_BIT(TIMx->DIER, TIM_DIER_UDE) == (TIM_DIER_UDE)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Enable capture/compare 1 DMA request (CC1DE).
+ * @rmtoll DIER CC1DE LL_TIM_EnableDMAReq_CC1
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_EnableDMAReq_CC1(TIM_TypeDef *TIMx)
+{
+ SET_BIT(TIMx->DIER, TIM_DIER_CC1DE);
+}
+
+/**
+ * @brief Disable capture/compare 1 DMA request (CC1DE).
+ * @rmtoll DIER CC1DE LL_TIM_DisableDMAReq_CC1
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_DisableDMAReq_CC1(TIM_TypeDef *TIMx)
+{
+ CLEAR_BIT(TIMx->DIER, TIM_DIER_CC1DE);
+}
+
+/**
+ * @brief Indicates whether the capture/compare 1 DMA request (CC1DE) is enabled.
+ * @rmtoll DIER CC1DE LL_TIM_IsEnabledDMAReq_CC1
+ * @param TIMx Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_CC1(TIM_TypeDef *TIMx)
+{
+ return ((READ_BIT(TIMx->DIER, TIM_DIER_CC1DE) == (TIM_DIER_CC1DE)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Enable capture/compare 2 DMA request (CC2DE).
+ * @rmtoll DIER CC2DE LL_TIM_EnableDMAReq_CC2
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_EnableDMAReq_CC2(TIM_TypeDef *TIMx)
+{
+ SET_BIT(TIMx->DIER, TIM_DIER_CC2DE);
+}
+
+/**
+ * @brief Disable capture/compare 2 DMA request (CC2DE).
+ * @rmtoll DIER CC2DE LL_TIM_DisableDMAReq_CC2
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_DisableDMAReq_CC2(TIM_TypeDef *TIMx)
+{
+ CLEAR_BIT(TIMx->DIER, TIM_DIER_CC2DE);
+}
+
+/**
+ * @brief Indicates whether the capture/compare 2 DMA request (CC2DE) is enabled.
+ * @rmtoll DIER CC2DE LL_TIM_IsEnabledDMAReq_CC2
+ * @param TIMx Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_CC2(TIM_TypeDef *TIMx)
+{
+ return ((READ_BIT(TIMx->DIER, TIM_DIER_CC2DE) == (TIM_DIER_CC2DE)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Enable capture/compare 3 DMA request (CC3DE).
+ * @rmtoll DIER CC3DE LL_TIM_EnableDMAReq_CC3
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_EnableDMAReq_CC3(TIM_TypeDef *TIMx)
+{
+ SET_BIT(TIMx->DIER, TIM_DIER_CC3DE);
+}
+
+/**
+ * @brief Disable capture/compare 3 DMA request (CC3DE).
+ * @rmtoll DIER CC3DE LL_TIM_DisableDMAReq_CC3
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_DisableDMAReq_CC3(TIM_TypeDef *TIMx)
+{
+ CLEAR_BIT(TIMx->DIER, TIM_DIER_CC3DE);
+}
+
+/**
+ * @brief Indicates whether the capture/compare 3 DMA request (CC3DE) is enabled.
+ * @rmtoll DIER CC3DE LL_TIM_IsEnabledDMAReq_CC3
+ * @param TIMx Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_CC3(TIM_TypeDef *TIMx)
+{
+ return ((READ_BIT(TIMx->DIER, TIM_DIER_CC3DE) == (TIM_DIER_CC3DE)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Enable capture/compare 4 DMA request (CC4DE).
+ * @rmtoll DIER CC4DE LL_TIM_EnableDMAReq_CC4
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_EnableDMAReq_CC4(TIM_TypeDef *TIMx)
+{
+ SET_BIT(TIMx->DIER, TIM_DIER_CC4DE);
+}
+
+/**
+ * @brief Disable capture/compare 4 DMA request (CC4DE).
+ * @rmtoll DIER CC4DE LL_TIM_DisableDMAReq_CC4
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_DisableDMAReq_CC4(TIM_TypeDef *TIMx)
+{
+ CLEAR_BIT(TIMx->DIER, TIM_DIER_CC4DE);
+}
+
+/**
+ * @brief Indicates whether the capture/compare 4 DMA request (CC4DE) is enabled.
+ * @rmtoll DIER CC4DE LL_TIM_IsEnabledDMAReq_CC4
+ * @param TIMx Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_CC4(TIM_TypeDef *TIMx)
+{
+ return ((READ_BIT(TIMx->DIER, TIM_DIER_CC4DE) == (TIM_DIER_CC4DE)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Enable commutation DMA request (COMDE).
+ * @rmtoll DIER COMDE LL_TIM_EnableDMAReq_COM
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_EnableDMAReq_COM(TIM_TypeDef *TIMx)
+{
+ SET_BIT(TIMx->DIER, TIM_DIER_COMDE);
+}
+
+/**
+ * @brief Disable commutation DMA request (COMDE).
+ * @rmtoll DIER COMDE LL_TIM_DisableDMAReq_COM
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_DisableDMAReq_COM(TIM_TypeDef *TIMx)
+{
+ CLEAR_BIT(TIMx->DIER, TIM_DIER_COMDE);
+}
+
+/**
+ * @brief Indicates whether the commutation DMA request (COMDE) is enabled.
+ * @rmtoll DIER COMDE LL_TIM_IsEnabledDMAReq_COM
+ * @param TIMx Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_COM(TIM_TypeDef *TIMx)
+{
+ return ((READ_BIT(TIMx->DIER, TIM_DIER_COMDE) == (TIM_DIER_COMDE)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Enable trigger interrupt (TDE).
+ * @rmtoll DIER TDE LL_TIM_EnableDMAReq_TRIG
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_EnableDMAReq_TRIG(TIM_TypeDef *TIMx)
+{
+ SET_BIT(TIMx->DIER, TIM_DIER_TDE);
+}
+
+/**
+ * @brief Disable trigger interrupt (TDE).
+ * @rmtoll DIER TDE LL_TIM_DisableDMAReq_TRIG
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_DisableDMAReq_TRIG(TIM_TypeDef *TIMx)
+{
+ CLEAR_BIT(TIMx->DIER, TIM_DIER_TDE);
+}
+
+/**
+ * @brief Indicates whether the trigger interrupt (TDE) is enabled.
+ * @rmtoll DIER TDE LL_TIM_IsEnabledDMAReq_TRIG
+ * @param TIMx Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_TRIG(TIM_TypeDef *TIMx)
+{
+ return ((READ_BIT(TIMx->DIER, TIM_DIER_TDE) == (TIM_DIER_TDE)) ? 1UL : 0UL);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EF_EVENT_Management EVENT-Management
+ * @{
+ */
+/**
+ * @brief Generate an update event.
+ * @rmtoll EGR UG LL_TIM_GenerateEvent_UPDATE
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_GenerateEvent_UPDATE(TIM_TypeDef *TIMx)
+{
+ SET_BIT(TIMx->EGR, TIM_EGR_UG);
+}
+
+/**
+ * @brief Generate Capture/Compare 1 event.
+ * @rmtoll EGR CC1G LL_TIM_GenerateEvent_CC1
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_GenerateEvent_CC1(TIM_TypeDef *TIMx)
+{
+ SET_BIT(TIMx->EGR, TIM_EGR_CC1G);
+}
+
+/**
+ * @brief Generate Capture/Compare 2 event.
+ * @rmtoll EGR CC2G LL_TIM_GenerateEvent_CC2
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_GenerateEvent_CC2(TIM_TypeDef *TIMx)
+{
+ SET_BIT(TIMx->EGR, TIM_EGR_CC2G);
+}
+
+/**
+ * @brief Generate Capture/Compare 3 event.
+ * @rmtoll EGR CC3G LL_TIM_GenerateEvent_CC3
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_GenerateEvent_CC3(TIM_TypeDef *TIMx)
+{
+ SET_BIT(TIMx->EGR, TIM_EGR_CC3G);
+}
+
+/**
+ * @brief Generate Capture/Compare 4 event.
+ * @rmtoll EGR CC4G LL_TIM_GenerateEvent_CC4
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_GenerateEvent_CC4(TIM_TypeDef *TIMx)
+{
+ SET_BIT(TIMx->EGR, TIM_EGR_CC4G);
+}
+
+/**
+ * @brief Generate commutation event.
+ * @rmtoll EGR COMG LL_TIM_GenerateEvent_COM
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_GenerateEvent_COM(TIM_TypeDef *TIMx)
+{
+ SET_BIT(TIMx->EGR, TIM_EGR_COMG);
+}
+
+/**
+ * @brief Generate trigger event.
+ * @rmtoll EGR TG LL_TIM_GenerateEvent_TRIG
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_GenerateEvent_TRIG(TIM_TypeDef *TIMx)
+{
+ SET_BIT(TIMx->EGR, TIM_EGR_TG);
+}
+
+/**
+ * @brief Generate break event.
+ * @rmtoll EGR BG LL_TIM_GenerateEvent_BRK
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_GenerateEvent_BRK(TIM_TypeDef *TIMx)
+{
+ SET_BIT(TIMx->EGR, TIM_EGR_BG);
+}
+
+/**
+ * @}
+ */
+
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup TIM_LL_EF_Init Initialisation and deinitialisation functions
+ * @{
+ */
+
+ErrorStatus LL_TIM_DeInit(TIM_TypeDef *TIMx);
+void LL_TIM_StructInit(LL_TIM_InitTypeDef *TIM_InitStruct);
+ErrorStatus LL_TIM_Init(TIM_TypeDef *TIMx, LL_TIM_InitTypeDef *TIM_InitStruct);
+void LL_TIM_OC_StructInit(LL_TIM_OC_InitTypeDef *TIM_OC_InitStruct);
+ErrorStatus LL_TIM_OC_Init(TIM_TypeDef *TIMx, uint32_t Channel, LL_TIM_OC_InitTypeDef *TIM_OC_InitStruct);
+void LL_TIM_IC_StructInit(LL_TIM_IC_InitTypeDef *TIM_ICInitStruct);
+ErrorStatus LL_TIM_IC_Init(TIM_TypeDef *TIMx, uint32_t Channel, LL_TIM_IC_InitTypeDef *TIM_IC_InitStruct);
+void LL_TIM_ENCODER_StructInit(LL_TIM_ENCODER_InitTypeDef *TIM_EncoderInitStruct);
+ErrorStatus LL_TIM_ENCODER_Init(TIM_TypeDef *TIMx, LL_TIM_ENCODER_InitTypeDef *TIM_EncoderInitStruct);
+void LL_TIM_HALLSENSOR_StructInit(LL_TIM_HALLSENSOR_InitTypeDef *TIM_HallSensorInitStruct);
+ErrorStatus LL_TIM_HALLSENSOR_Init(TIM_TypeDef *TIMx, LL_TIM_HALLSENSOR_InitTypeDef *TIM_HallSensorInitStruct);
+void LL_TIM_BDTR_StructInit(LL_TIM_BDTR_InitTypeDef *TIM_BDTRInitStruct);
+ErrorStatus LL_TIM_BDTR_Init(TIM_TypeDef *TIMx, LL_TIM_BDTR_InitTypeDef *TIM_BDTRInitStruct);
+/**
+ * @}
+ */
+#endif /* USE_FULL_LL_DRIVER */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* TIM1 || TIM2 || TIM3 || TIM14 || TIM15 || TIM16 || TIM17 || TIM6 || TIM7 */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_LL_TIM_H */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_usart.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_usart.h
new file mode 100644
index 0000000..2e68eab
--- /dev/null
+++ b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_usart.h
@@ -0,0 +1,3810 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_ll_usart.h
+ * @author MCD Application Team
+ * @brief Header file of USART LL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32F0xx_LL_USART_H
+#define STM32F0xx_LL_USART_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx.h"
+
+/** @addtogroup STM32F0xx_LL_Driver
+ * @{
+ */
+
+#if defined (USART1) || defined (USART2) || defined (USART3) || defined (UART4) || defined (UART5) || defined (USART6) || defined (USART7) || defined (USART8)
+
+/** @defgroup USART_LL USART
+ * @{
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup USART_LL_Private_Macros USART Private Macros
+ * @{
+ */
+/**
+ * @}
+ */
+#endif /*USE_FULL_LL_DRIVER*/
+
+/* Exported types ------------------------------------------------------------*/
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup USART_LL_ES_INIT USART Exported Init structures
+ * @{
+ */
+
+/**
+ * @brief LL USART Init Structure definition
+ */
+typedef struct
+{
+
+ uint32_t BaudRate; /*!< This field defines expected Usart communication baud rate.
+
+ This feature can be modified afterwards using unitary function @ref LL_USART_SetBaudRate().*/
+
+ uint32_t DataWidth; /*!< Specifies the number of data bits transmitted or received in a frame.
+ This parameter can be a value of @ref USART_LL_EC_DATAWIDTH.
+
+ This feature can be modified afterwards using unitary function @ref LL_USART_SetDataWidth().*/
+
+ uint32_t StopBits; /*!< Specifies the number of stop bits transmitted.
+ This parameter can be a value of @ref USART_LL_EC_STOPBITS.
+
+ This feature can be modified afterwards using unitary function @ref LL_USART_SetStopBitsLength().*/
+
+ uint32_t Parity; /*!< Specifies the parity mode.
+ This parameter can be a value of @ref USART_LL_EC_PARITY.
+
+ This feature can be modified afterwards using unitary function @ref LL_USART_SetParity().*/
+
+ uint32_t TransferDirection; /*!< Specifies whether the Receive and/or Transmit mode is enabled or disabled.
+ This parameter can be a value of @ref USART_LL_EC_DIRECTION.
+
+ This feature can be modified afterwards using unitary function @ref LL_USART_SetTransferDirection().*/
+
+ uint32_t HardwareFlowControl; /*!< Specifies whether the hardware flow control mode is enabled or disabled.
+ This parameter can be a value of @ref USART_LL_EC_HWCONTROL.
+
+ This feature can be modified afterwards using unitary function @ref LL_USART_SetHWFlowCtrl().*/
+
+ uint32_t OverSampling; /*!< Specifies whether USART oversampling mode is 16 or 8.
+ This parameter can be a value of @ref USART_LL_EC_OVERSAMPLING.
+
+ This feature can be modified afterwards using unitary function @ref LL_USART_SetOverSampling().*/
+
+} LL_USART_InitTypeDef;
+
+/**
+ * @brief LL USART Clock Init Structure definition
+ */
+typedef struct
+{
+ uint32_t ClockOutput; /*!< Specifies whether the USART clock is enabled or disabled.
+ This parameter can be a value of @ref USART_LL_EC_CLOCK.
+
+ USART HW configuration can be modified afterwards using unitary functions
+ @ref LL_USART_EnableSCLKOutput() or @ref LL_USART_DisableSCLKOutput().
+ For more details, refer to description of this function. */
+
+ uint32_t ClockPolarity; /*!< Specifies the steady state of the serial clock.
+ This parameter can be a value of @ref USART_LL_EC_POLARITY.
+
+ USART HW configuration can be modified afterwards using unitary functions @ref LL_USART_SetClockPolarity().
+ For more details, refer to description of this function. */
+
+ uint32_t ClockPhase; /*!< Specifies the clock transition on which the bit capture is made.
+ This parameter can be a value of @ref USART_LL_EC_PHASE.
+
+ USART HW configuration can be modified afterwards using unitary functions @ref LL_USART_SetClockPhase().
+ For more details, refer to description of this function. */
+
+ uint32_t LastBitClockPulse; /*!< Specifies whether the clock pulse corresponding to the last transmitted
+ data bit (MSB) has to be output on the SCLK pin in synchronous mode.
+ This parameter can be a value of @ref USART_LL_EC_LASTCLKPULSE.
+
+ USART HW configuration can be modified afterwards using unitary functions @ref LL_USART_SetLastClkPulseOutput().
+ For more details, refer to description of this function. */
+
+} LL_USART_ClockInitTypeDef;
+
+/**
+ * @}
+ */
+#endif /* USE_FULL_LL_DRIVER */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup USART_LL_Exported_Constants USART Exported Constants
+ * @{
+ */
+
+/** @defgroup USART_LL_EC_CLEAR_FLAG Clear Flags Defines
+ * @brief Flags defines which can be used with LL_USART_WriteReg function
+ * @{
+ */
+#define LL_USART_ICR_PECF USART_ICR_PECF /*!< Parity error flag */
+#define LL_USART_ICR_FECF USART_ICR_FECF /*!< Framing error flag */
+#define LL_USART_ICR_NCF USART_ICR_NCF /*!< Noise error detected flag */
+#define LL_USART_ICR_ORECF USART_ICR_ORECF /*!< Overrun error flag */
+#define LL_USART_ICR_IDLECF USART_ICR_IDLECF /*!< Idle line detected flag */
+#define LL_USART_ICR_TCCF USART_ICR_TCCF /*!< Transmission complete flag */
+#if defined USART_LIN_SUPPORT
+#define LL_USART_ICR_LBDCF USART_ICR_LBDCF /*!< LIN break detection flag */
+#endif /* USART_LIN_SUPPORT */
+#define LL_USART_ICR_CTSCF USART_ICR_CTSCF /*!< CTS flag */
+#define LL_USART_ICR_RTOCF USART_ICR_RTOCF /*!< Receiver timeout flag */
+#if defined USART_SMARTCARD_SUPPORT
+#define LL_USART_ICR_EOBCF USART_ICR_EOBCF /*!< End of block flag */
+#endif /* USART_SMARTCARD_SUPPORT */
+#define LL_USART_ICR_CMCF USART_ICR_CMCF /*!< Character match flag */
+#if defined(USART_CR1_UESM)
+#define LL_USART_ICR_WUCF USART_ICR_WUCF /*!< Wakeup from Stop mode flag */
+#endif /* USART_CR1_UESM */
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EC_GET_FLAG Get Flags Defines
+ * @brief Flags defines which can be used with LL_USART_ReadReg function
+ * @{
+ */
+#define LL_USART_ISR_PE USART_ISR_PE /*!< Parity error flag */
+#define LL_USART_ISR_FE USART_ISR_FE /*!< Framing error flag */
+#define LL_USART_ISR_NE USART_ISR_NE /*!< Noise detected flag */
+#define LL_USART_ISR_ORE USART_ISR_ORE /*!< Overrun error flag */
+#define LL_USART_ISR_IDLE USART_ISR_IDLE /*!< Idle line detected flag */
+#define LL_USART_ISR_RXNE USART_ISR_RXNE /*!< Read data register not empty flag */
+#define LL_USART_ISR_TC USART_ISR_TC /*!< Transmission complete flag */
+#define LL_USART_ISR_TXE USART_ISR_TXE /*!< Transmit data register empty flag */
+#if defined USART_LIN_SUPPORT
+#define LL_USART_ISR_LBDF USART_ISR_LBDF /*!< LIN break detection flag */
+#endif /* USART_LIN_SUPPORT */
+#define LL_USART_ISR_CTSIF USART_ISR_CTSIF /*!< CTS interrupt flag */
+#define LL_USART_ISR_CTS USART_ISR_CTS /*!< CTS flag */
+#define LL_USART_ISR_RTOF USART_ISR_RTOF /*!< Receiver timeout flag */
+#if defined USART_SMARTCARD_SUPPORT
+#define LL_USART_ISR_EOBF USART_ISR_EOBF /*!< End of block flag */
+#endif /* USART_SMARTCARD_SUPPORT */
+#define LL_USART_ISR_ABRE USART_ISR_ABRE /*!< Auto baud rate error flag */
+#define LL_USART_ISR_ABRF USART_ISR_ABRF /*!< Auto baud rate flag */
+#define LL_USART_ISR_BUSY USART_ISR_BUSY /*!< Busy flag */
+#define LL_USART_ISR_CMF USART_ISR_CMF /*!< Character match flag */
+#define LL_USART_ISR_SBKF USART_ISR_SBKF /*!< Send break flag */
+#define LL_USART_ISR_RWU USART_ISR_RWU /*!< Receiver wakeup from Mute mode flag */
+#if defined(USART_CR1_UESM)
+#define LL_USART_ISR_WUF USART_ISR_WUF /*!< Wakeup from Stop mode flag */
+#endif /* USART_CR1_UESM */
+#define LL_USART_ISR_TEACK USART_ISR_TEACK /*!< Transmit enable acknowledge flag */
+#define LL_USART_ISR_REACK USART_ISR_REACK /*!< Receive enable acknowledge flag */
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EC_IT IT Defines
+ * @brief IT defines which can be used with LL_USART_ReadReg and LL_USART_WriteReg functions
+ * @{
+ */
+#define LL_USART_CR1_IDLEIE USART_CR1_IDLEIE /*!< IDLE interrupt enable */
+#define LL_USART_CR1_RXNEIE USART_CR1_RXNEIE /*!< Read data register not empty interrupt enable */
+#define LL_USART_CR1_TCIE USART_CR1_TCIE /*!< Transmission complete interrupt enable */
+#define LL_USART_CR1_TXEIE USART_CR1_TXEIE /*!< Transmit data register empty interrupt enable */
+#define LL_USART_CR1_PEIE USART_CR1_PEIE /*!< Parity error */
+#define LL_USART_CR1_CMIE USART_CR1_CMIE /*!< Character match interrupt enable */
+#define LL_USART_CR1_RTOIE USART_CR1_RTOIE /*!< Receiver timeout interrupt enable */
+#if defined(USART_SMARTCARD_SUPPORT)
+#define LL_USART_CR1_EOBIE USART_CR1_EOBIE /*!< End of Block interrupt enable */
+#endif /* USART_SMARTCARD_SUPPORT */
+#if defined(USART_LIN_SUPPORT)
+#define LL_USART_CR2_LBDIE USART_CR2_LBDIE /*!< LIN break detection interrupt enable */
+#endif /* USART_LIN_SUPPORT */
+#define LL_USART_CR3_EIE USART_CR3_EIE /*!< Error interrupt enable */
+#define LL_USART_CR3_CTSIE USART_CR3_CTSIE /*!< CTS interrupt enable */
+#if defined(USART_CR1_UESM)
+#define LL_USART_CR3_WUFIE USART_CR3_WUFIE /*!< Wakeup from Stop mode interrupt enable */
+#endif /* USART_CR1_UESM */
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EC_DIRECTION Communication Direction
+ * @{
+ */
+#define LL_USART_DIRECTION_NONE 0x00000000U /*!< Transmitter and Receiver are disabled */
+#define LL_USART_DIRECTION_RX USART_CR1_RE /*!< Transmitter is disabled and Receiver is enabled */
+#define LL_USART_DIRECTION_TX USART_CR1_TE /*!< Transmitter is enabled and Receiver is disabled */
+#define LL_USART_DIRECTION_TX_RX (USART_CR1_TE |USART_CR1_RE) /*!< Transmitter and Receiver are enabled */
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EC_PARITY Parity Control
+ * @{
+ */
+#define LL_USART_PARITY_NONE 0x00000000U /*!< Parity control disabled */
+#define LL_USART_PARITY_EVEN USART_CR1_PCE /*!< Parity control enabled and Even Parity is selected */
+#define LL_USART_PARITY_ODD (USART_CR1_PCE | USART_CR1_PS) /*!< Parity control enabled and Odd Parity is selected */
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EC_WAKEUP Wakeup
+ * @{
+ */
+#define LL_USART_WAKEUP_IDLELINE 0x00000000U /*!< USART wake up from Mute mode on Idle Line */
+#define LL_USART_WAKEUP_ADDRESSMARK USART_CR1_WAKE /*!< USART wake up from Mute mode on Address Mark */
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EC_DATAWIDTH Datawidth
+ * @{
+ */
+#if defined(USART_7BITS_SUPPORT)
+#define LL_USART_DATAWIDTH_7B USART_CR1_M1 /*!< 7 bits word length : Start bit, 7 data bits, n stop bits */
+#define LL_USART_DATAWIDTH_8B 0x00000000U /*!< 8 bits word length : Start bit, 8 data bits, n stop bits */
+#define LL_USART_DATAWIDTH_9B USART_CR1_M0 /*!< 9 bits word length : Start bit, 9 data bits, n stop bits */
+#else
+#define LL_USART_DATAWIDTH_8B 0x00000000U /*!< 8 bits word length : Start bit, 8 data bits, n stop bits */
+#define LL_USART_DATAWIDTH_9B USART_CR1_M /*!< 9 bits word length : Start bit, 9 data bits, n stop bits */
+#endif/* USART_7BITS_SUPPORT */
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EC_OVERSAMPLING Oversampling
+ * @{
+ */
+#define LL_USART_OVERSAMPLING_16 0x00000000U /*!< Oversampling by 16 */
+#define LL_USART_OVERSAMPLING_8 USART_CR1_OVER8 /*!< Oversampling by 8 */
+/**
+ * @}
+ */
+
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup USART_LL_EC_CLOCK Clock Signal
+ * @{
+ */
+
+#define LL_USART_CLOCK_DISABLE 0x00000000U /*!< Clock signal not provided */
+#define LL_USART_CLOCK_ENABLE USART_CR2_CLKEN /*!< Clock signal provided */
+/**
+ * @}
+ */
+#endif /*USE_FULL_LL_DRIVER*/
+
+/** @defgroup USART_LL_EC_LASTCLKPULSE Last Clock Pulse
+ * @{
+ */
+#define LL_USART_LASTCLKPULSE_NO_OUTPUT 0x00000000U /*!< The clock pulse of the last data bit is not output to the SCLK pin */
+#define LL_USART_LASTCLKPULSE_OUTPUT USART_CR2_LBCL /*!< The clock pulse of the last data bit is output to the SCLK pin */
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EC_PHASE Clock Phase
+ * @{
+ */
+#define LL_USART_PHASE_1EDGE 0x00000000U /*!< The first clock transition is the first data capture edge */
+#define LL_USART_PHASE_2EDGE USART_CR2_CPHA /*!< The second clock transition is the first data capture edge */
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EC_POLARITY Clock Polarity
+ * @{
+ */
+#define LL_USART_POLARITY_LOW 0x00000000U /*!< Steady low value on SCLK pin outside transmission window*/
+#define LL_USART_POLARITY_HIGH USART_CR2_CPOL /*!< Steady high value on SCLK pin outside transmission window */
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EC_STOPBITS Stop Bits
+ * @{
+ */
+#if defined(USART_SMARTCARD_SUPPORT)
+#define LL_USART_STOPBITS_0_5 USART_CR2_STOP_0 /*!< 0.5 stop bit */
+#endif /* USART_SMARTCARD_SUPPORT */
+#define LL_USART_STOPBITS_1 0x00000000U /*!< 1 stop bit */
+#if defined(USART_SMARTCARD_SUPPORT)
+#define LL_USART_STOPBITS_1_5 (USART_CR2_STOP_0 | USART_CR2_STOP_1) /*!< 1.5 stop bits */
+#endif /* USART_SMARTCARD_SUPPORT */
+#define LL_USART_STOPBITS_2 USART_CR2_STOP_1 /*!< 2 stop bits */
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EC_TXRX TX RX Pins Swap
+ * @{
+ */
+#define LL_USART_TXRX_STANDARD 0x00000000U /*!< TX/RX pins are used as defined in standard pinout */
+#define LL_USART_TXRX_SWAPPED (USART_CR2_SWAP) /*!< TX and RX pins functions are swapped. */
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EC_RXPIN_LEVEL RX Pin Active Level Inversion
+ * @{
+ */
+#define LL_USART_RXPIN_LEVEL_STANDARD 0x00000000U /*!< RX pin signal works using the standard logic levels */
+#define LL_USART_RXPIN_LEVEL_INVERTED (USART_CR2_RXINV) /*!< RX pin signal values are inverted. */
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EC_TXPIN_LEVEL TX Pin Active Level Inversion
+ * @{
+ */
+#define LL_USART_TXPIN_LEVEL_STANDARD 0x00000000U /*!< TX pin signal works using the standard logic levels */
+#define LL_USART_TXPIN_LEVEL_INVERTED (USART_CR2_TXINV) /*!< TX pin signal values are inverted. */
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EC_BINARY_LOGIC Binary Data Inversion
+ * @{
+ */
+#define LL_USART_BINARY_LOGIC_POSITIVE 0x00000000U /*!< Logical data from the data register are send/received in positive/direct logic. (1=H, 0=L) */
+#define LL_USART_BINARY_LOGIC_NEGATIVE USART_CR2_DATAINV /*!< Logical data from the data register are send/received in negative/inverse logic. (1=L, 0=H). The parity bit is also inverted. */
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EC_BITORDER Bit Order
+ * @{
+ */
+#define LL_USART_BITORDER_LSBFIRST 0x00000000U /*!< data is transmitted/received with data bit 0 first, following the start bit */
+#define LL_USART_BITORDER_MSBFIRST USART_CR2_MSBFIRST /*!< data is transmitted/received with the MSB first, following the start bit */
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EC_AUTOBAUD_DETECT_ON Autobaud Detection
+ * @{
+ */
+#define LL_USART_AUTOBAUD_DETECT_ON_STARTBIT 0x00000000U /*!< Measurement of the start bit is used to detect the baud rate */
+#define LL_USART_AUTOBAUD_DETECT_ON_FALLINGEDGE USART_CR2_ABRMODE_0 /*!< Falling edge to falling edge measurement. Received frame must start with a single bit = 1 -> Frame = Start10xxxxxx */
+#if defined(USART_FABR_SUPPORT)
+#define LL_USART_AUTOBAUD_DETECT_ON_7F_FRAME USART_CR2_ABRMODE_1 /*!< 0x7F frame detection */
+#define LL_USART_AUTOBAUD_DETECT_ON_55_FRAME (USART_CR2_ABRMODE_1 | USART_CR2_ABRMODE_0) /*!< 0x55 frame detection */
+#endif /* USART_FABR_SUPPORT */
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EC_ADDRESS_DETECT Address Length Detection
+ * @{
+ */
+#define LL_USART_ADDRESS_DETECT_4B 0x00000000U /*!< 4-bit address detection method selected */
+#define LL_USART_ADDRESS_DETECT_7B USART_CR2_ADDM7 /*!< 7-bit address detection (in 8-bit data mode) method selected */
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EC_HWCONTROL Hardware Control
+ * @{
+ */
+#define LL_USART_HWCONTROL_NONE 0x00000000U /*!< CTS and RTS hardware flow control disabled */
+#define LL_USART_HWCONTROL_RTS USART_CR3_RTSE /*!< RTS output enabled, data is only requested when there is space in the receive buffer */
+#define LL_USART_HWCONTROL_CTS USART_CR3_CTSE /*!< CTS mode enabled, data is only transmitted when the nCTS input is asserted (tied to 0) */
+#define LL_USART_HWCONTROL_RTS_CTS (USART_CR3_RTSE | USART_CR3_CTSE) /*!< CTS and RTS hardware flow control enabled */
+/**
+ * @}
+ */
+
+#if defined(USART_CR1_UESM)
+/** @defgroup USART_LL_EC_WAKEUP_ON Wakeup Activation
+ * @{
+ */
+#define LL_USART_WAKEUP_ON_ADDRESS 0x00000000U /*!< Wake up active on address match */
+#define LL_USART_WAKEUP_ON_STARTBIT USART_CR3_WUS_1 /*!< Wake up active on Start bit detection */
+#define LL_USART_WAKEUP_ON_RXNE (USART_CR3_WUS_0 | USART_CR3_WUS_1) /*!< Wake up active on RXNE */
+/**
+ * @}
+ */
+
+#endif /* USART_CR1_UESM */
+#if defined(USART_IRDA_SUPPORT)
+/** @defgroup USART_LL_EC_IRDA_POWER IrDA Power
+ * @{
+ */
+#define LL_USART_IRDA_POWER_NORMAL 0x00000000U /*!< IrDA normal power mode */
+#define LL_USART_IRDA_POWER_LOW USART_CR3_IRLP /*!< IrDA low power mode */
+/**
+ * @}
+ */
+#endif /* USART_IRDA_SUPPORT */
+
+#if defined(USART_LIN_SUPPORT)
+/** @defgroup USART_LL_EC_LINBREAK_DETECT LIN Break Detection Length
+ * @{
+ */
+#define LL_USART_LINBREAK_DETECT_10B 0x00000000U /*!< 10-bit break detection method selected */
+#define LL_USART_LINBREAK_DETECT_11B USART_CR2_LBDL /*!< 11-bit break detection method selected */
+/**
+ * @}
+ */
+#endif /* USART_LIN_SUPPORT */
+
+/** @defgroup USART_LL_EC_DE_POLARITY Driver Enable Polarity
+ * @{
+ */
+#define LL_USART_DE_POLARITY_HIGH 0x00000000U /*!< DE signal is active high */
+#define LL_USART_DE_POLARITY_LOW USART_CR3_DEP /*!< DE signal is active low */
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EC_DMA_REG_DATA DMA Register Data
+ * @{
+ */
+#define LL_USART_DMA_REG_DATA_TRANSMIT 0x00000000U /*!< Get address of data register used for transmission */
+#define LL_USART_DMA_REG_DATA_RECEIVE 0x00000001U /*!< Get address of data register used for reception */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup USART_LL_Exported_Macros USART Exported Macros
+ * @{
+ */
+
+/** @defgroup USART_LL_EM_WRITE_READ Common Write and read registers Macros
+ * @{
+ */
+
+/**
+ * @brief Write a value in USART register
+ * @param __INSTANCE__ USART Instance
+ * @param __REG__ Register to be written
+ * @param __VALUE__ Value to be written in the register
+ * @retval None
+ */
+#define LL_USART_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__))
+
+/**
+ * @brief Read a value in USART register
+ * @param __INSTANCE__ USART Instance
+ * @param __REG__ Register to be read
+ * @retval Register value
+ */
+#define LL_USART_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__)
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EM_Exported_Macros_Helper Exported_Macros_Helper
+ * @{
+ */
+
+/**
+ * @brief Compute USARTDIV value according to Peripheral Clock and
+ * expected Baud Rate in 8 bits sampling mode (32 bits value of USARTDIV is returned)
+ * @param __PERIPHCLK__ Peripheral Clock frequency used for USART instance
+ * @param __BAUDRATE__ Baud rate value to achieve
+ * @retval USARTDIV value to be used for BRR register filling in OverSampling_8 case
+ */
+#define __LL_USART_DIV_SAMPLING8(__PERIPHCLK__, __BAUDRATE__) ((((__PERIPHCLK__)*2U)\
+ + ((__BAUDRATE__)/2U))/(__BAUDRATE__))
+
+/**
+ * @brief Compute USARTDIV value according to Peripheral Clock and
+ * expected Baud Rate in 16 bits sampling mode (32 bits value of USARTDIV is returned)
+ * @param __PERIPHCLK__ Peripheral Clock frequency used for USART instance
+ * @param __BAUDRATE__ Baud rate value to achieve
+ * @retval USARTDIV value to be used for BRR register filling in OverSampling_16 case
+ */
+#define __LL_USART_DIV_SAMPLING16(__PERIPHCLK__, __BAUDRATE__) (((__PERIPHCLK__) + ((__BAUDRATE__)/2U))/(__BAUDRATE__))
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup USART_LL_Exported_Functions USART Exported Functions
+ * @{
+ */
+
+/** @defgroup USART_LL_EF_Configuration Configuration functions
+ * @{
+ */
+
+/**
+ * @brief USART Enable
+ * @rmtoll CR1 UE LL_USART_Enable
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_Enable(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR1, USART_CR1_UE);
+}
+
+/**
+ * @brief USART Disable (all USART prescalers and outputs are disabled)
+ * @note When USART is disabled, USART prescalers and outputs are stopped immediately,
+ * and current operations are discarded. The configuration of the USART is kept, but all the status
+ * flags, in the USARTx_ISR are set to their default values.
+ * @rmtoll CR1 UE LL_USART_Disable
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_Disable(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR1, USART_CR1_UE);
+}
+
+/**
+ * @brief Indicate if USART is enabled
+ * @rmtoll CR1 UE LL_USART_IsEnabled
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabled(USART_TypeDef *USARTx)
+{
+ return ((READ_BIT(USARTx->CR1, USART_CR1_UE) == (USART_CR1_UE)) ? 1UL : 0UL);
+}
+
+#if defined(USART_CR1_UESM)
+/**
+ * @brief USART enabled in STOP Mode.
+ * @note When this function is enabled, USART is able to wake up the MCU from Stop mode, provided that
+ * USART clock selection is HSI or LSE in RCC.
+ * @note Macro @ref IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not
+ * Wake-up from Stop mode feature is supported by the USARTx instance.
+ * @rmtoll CR1 UESM LL_USART_EnableInStopMode
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableInStopMode(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR1, USART_CR1_UESM);
+}
+
+/**
+ * @brief USART disabled in STOP Mode.
+ * @note When this function is disabled, USART is not able to wake up the MCU from Stop mode
+ * @note Macro @ref IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not
+ * Wake-up from Stop mode feature is supported by the USARTx instance.
+ * @rmtoll CR1 UESM LL_USART_DisableInStopMode
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableInStopMode(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR1, USART_CR1_UESM);
+}
+
+/**
+ * @brief Indicate if USART is enabled in STOP Mode (able to wake up MCU from Stop mode or not)
+ * @note Macro @ref IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not
+ * Wake-up from Stop mode feature is supported by the USARTx instance.
+ * @rmtoll CR1 UESM LL_USART_IsEnabledInStopMode
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledInStopMode(USART_TypeDef *USARTx)
+{
+ return ((READ_BIT(USARTx->CR1, USART_CR1_UESM) == (USART_CR1_UESM)) ? 1UL : 0UL);
+}
+
+#endif /* USART_CR1_UESM*/
+/**
+ * @brief Receiver Enable (Receiver is enabled and begins searching for a start bit)
+ * @rmtoll CR1 RE LL_USART_EnableDirectionRx
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableDirectionRx(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR1, USART_CR1_RE);
+}
+
+/**
+ * @brief Receiver Disable
+ * @rmtoll CR1 RE LL_USART_DisableDirectionRx
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableDirectionRx(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR1, USART_CR1_RE);
+}
+
+/**
+ * @brief Transmitter Enable
+ * @rmtoll CR1 TE LL_USART_EnableDirectionTx
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableDirectionTx(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR1, USART_CR1_TE);
+}
+
+/**
+ * @brief Transmitter Disable
+ * @rmtoll CR1 TE LL_USART_DisableDirectionTx
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableDirectionTx(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR1, USART_CR1_TE);
+}
+
+/**
+ * @brief Configure simultaneously enabled/disabled states
+ * of Transmitter and Receiver
+ * @rmtoll CR1 RE LL_USART_SetTransferDirection\n
+ * CR1 TE LL_USART_SetTransferDirection
+ * @param USARTx USART Instance
+ * @param TransferDirection This parameter can be one of the following values:
+ * @arg @ref LL_USART_DIRECTION_NONE
+ * @arg @ref LL_USART_DIRECTION_RX
+ * @arg @ref LL_USART_DIRECTION_TX
+ * @arg @ref LL_USART_DIRECTION_TX_RX
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetTransferDirection(USART_TypeDef *USARTx, uint32_t TransferDirection)
+{
+ MODIFY_REG(USARTx->CR1, USART_CR1_RE | USART_CR1_TE, TransferDirection);
+}
+
+/**
+ * @brief Return enabled/disabled states of Transmitter and Receiver
+ * @rmtoll CR1 RE LL_USART_GetTransferDirection\n
+ * CR1 TE LL_USART_GetTransferDirection
+ * @param USARTx USART Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_USART_DIRECTION_NONE
+ * @arg @ref LL_USART_DIRECTION_RX
+ * @arg @ref LL_USART_DIRECTION_TX
+ * @arg @ref LL_USART_DIRECTION_TX_RX
+ */
+__STATIC_INLINE uint32_t LL_USART_GetTransferDirection(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_RE | USART_CR1_TE));
+}
+
+/**
+ * @brief Configure Parity (enabled/disabled and parity mode if enabled).
+ * @note This function selects if hardware parity control (generation and detection) is enabled or disabled.
+ * When the parity control is enabled (Odd or Even), computed parity bit is inserted at the MSB position
+ * (9th or 8th bit depending on data width) and parity is checked on the received data.
+ * @rmtoll CR1 PS LL_USART_SetParity\n
+ * CR1 PCE LL_USART_SetParity
+ * @param USARTx USART Instance
+ * @param Parity This parameter can be one of the following values:
+ * @arg @ref LL_USART_PARITY_NONE
+ * @arg @ref LL_USART_PARITY_EVEN
+ * @arg @ref LL_USART_PARITY_ODD
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetParity(USART_TypeDef *USARTx, uint32_t Parity)
+{
+ MODIFY_REG(USARTx->CR1, USART_CR1_PS | USART_CR1_PCE, Parity);
+}
+
+/**
+ * @brief Return Parity configuration (enabled/disabled and parity mode if enabled)
+ * @rmtoll CR1 PS LL_USART_GetParity\n
+ * CR1 PCE LL_USART_GetParity
+ * @param USARTx USART Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_USART_PARITY_NONE
+ * @arg @ref LL_USART_PARITY_EVEN
+ * @arg @ref LL_USART_PARITY_ODD
+ */
+__STATIC_INLINE uint32_t LL_USART_GetParity(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_PS | USART_CR1_PCE));
+}
+
+/**
+ * @brief Set Receiver Wake Up method from Mute mode.
+ * @rmtoll CR1 WAKE LL_USART_SetWakeUpMethod
+ * @param USARTx USART Instance
+ * @param Method This parameter can be one of the following values:
+ * @arg @ref LL_USART_WAKEUP_IDLELINE
+ * @arg @ref LL_USART_WAKEUP_ADDRESSMARK
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetWakeUpMethod(USART_TypeDef *USARTx, uint32_t Method)
+{
+ MODIFY_REG(USARTx->CR1, USART_CR1_WAKE, Method);
+}
+
+/**
+ * @brief Return Receiver Wake Up method from Mute mode
+ * @rmtoll CR1 WAKE LL_USART_GetWakeUpMethod
+ * @param USARTx USART Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_USART_WAKEUP_IDLELINE
+ * @arg @ref LL_USART_WAKEUP_ADDRESSMARK
+ */
+__STATIC_INLINE uint32_t LL_USART_GetWakeUpMethod(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_WAKE));
+}
+
+/**
+ * @brief Set Word length (i.e. nb of data bits, excluding start and stop bits)
+ * @rmtoll CR1 M0 LL_USART_SetDataWidth\n
+ * CR1 M1 LL_USART_SetDataWidth
+ * @param USARTx USART Instance
+ * @param DataWidth This parameter can be one of the following values:
+ * @arg @ref LL_USART_DATAWIDTH_7B (*)
+ * @arg @ref LL_USART_DATAWIDTH_8B
+ * @arg @ref LL_USART_DATAWIDTH_9B
+ *
+ * (*) Values not available on all devices
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetDataWidth(USART_TypeDef *USARTx, uint32_t DataWidth)
+{
+ MODIFY_REG(USARTx->CR1, USART_CR1_M, DataWidth);
+}
+
+/**
+ * @brief Return Word length (i.e. nb of data bits, excluding start and stop bits)
+ * @rmtoll CR1 M0 LL_USART_GetDataWidth\n
+ * CR1 M1 LL_USART_GetDataWidth
+ * @param USARTx USART Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_USART_DATAWIDTH_7B (*)
+ * @arg @ref LL_USART_DATAWIDTH_8B
+ * @arg @ref LL_USART_DATAWIDTH_9B
+ *
+ * (*) Values not available on all devices
+ */
+__STATIC_INLINE uint32_t LL_USART_GetDataWidth(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_M));
+}
+
+/**
+ * @brief Allow switch between Mute Mode and Active mode
+ * @rmtoll CR1 MME LL_USART_EnableMuteMode
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableMuteMode(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR1, USART_CR1_MME);
+}
+
+/**
+ * @brief Prevent Mute Mode use. Set Receiver in active mode permanently.
+ * @rmtoll CR1 MME LL_USART_DisableMuteMode
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableMuteMode(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR1, USART_CR1_MME);
+}
+
+/**
+ * @brief Indicate if switch between Mute Mode and Active mode is allowed
+ * @rmtoll CR1 MME LL_USART_IsEnabledMuteMode
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledMuteMode(USART_TypeDef *USARTx)
+{
+ return ((READ_BIT(USARTx->CR1, USART_CR1_MME) == (USART_CR1_MME)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Set Oversampling to 8-bit or 16-bit mode
+ * @rmtoll CR1 OVER8 LL_USART_SetOverSampling
+ * @param USARTx USART Instance
+ * @param OverSampling This parameter can be one of the following values:
+ * @arg @ref LL_USART_OVERSAMPLING_16
+ * @arg @ref LL_USART_OVERSAMPLING_8
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetOverSampling(USART_TypeDef *USARTx, uint32_t OverSampling)
+{
+ MODIFY_REG(USARTx->CR1, USART_CR1_OVER8, OverSampling);
+}
+
+/**
+ * @brief Return Oversampling mode
+ * @rmtoll CR1 OVER8 LL_USART_GetOverSampling
+ * @param USARTx USART Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_USART_OVERSAMPLING_16
+ * @arg @ref LL_USART_OVERSAMPLING_8
+ */
+__STATIC_INLINE uint32_t LL_USART_GetOverSampling(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_OVER8));
+}
+
+/**
+ * @brief Configure if Clock pulse of the last data bit is output to the SCLK pin or not
+ * @note Macro @ref IS_USART_INSTANCE(USARTx) can be used to check whether or not
+ * Synchronous mode is supported by the USARTx instance.
+ * @rmtoll CR2 LBCL LL_USART_SetLastClkPulseOutput
+ * @param USARTx USART Instance
+ * @param LastBitClockPulse This parameter can be one of the following values:
+ * @arg @ref LL_USART_LASTCLKPULSE_NO_OUTPUT
+ * @arg @ref LL_USART_LASTCLKPULSE_OUTPUT
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetLastClkPulseOutput(USART_TypeDef *USARTx, uint32_t LastBitClockPulse)
+{
+ MODIFY_REG(USARTx->CR2, USART_CR2_LBCL, LastBitClockPulse);
+}
+
+/**
+ * @brief Retrieve Clock pulse of the last data bit output configuration
+ * (Last bit Clock pulse output to the SCLK pin or not)
+ * @note Macro @ref IS_USART_INSTANCE(USARTx) can be used to check whether or not
+ * Synchronous mode is supported by the USARTx instance.
+ * @rmtoll CR2 LBCL LL_USART_GetLastClkPulseOutput
+ * @param USARTx USART Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_USART_LASTCLKPULSE_NO_OUTPUT
+ * @arg @ref LL_USART_LASTCLKPULSE_OUTPUT
+ */
+__STATIC_INLINE uint32_t LL_USART_GetLastClkPulseOutput(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_LBCL));
+}
+
+/**
+ * @brief Select the phase of the clock output on the SCLK pin in synchronous mode
+ * @note Macro @ref IS_USART_INSTANCE(USARTx) can be used to check whether or not
+ * Synchronous mode is supported by the USARTx instance.
+ * @rmtoll CR2 CPHA LL_USART_SetClockPhase
+ * @param USARTx USART Instance
+ * @param ClockPhase This parameter can be one of the following values:
+ * @arg @ref LL_USART_PHASE_1EDGE
+ * @arg @ref LL_USART_PHASE_2EDGE
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetClockPhase(USART_TypeDef *USARTx, uint32_t ClockPhase)
+{
+ MODIFY_REG(USARTx->CR2, USART_CR2_CPHA, ClockPhase);
+}
+
+/**
+ * @brief Return phase of the clock output on the SCLK pin in synchronous mode
+ * @note Macro @ref IS_USART_INSTANCE(USARTx) can be used to check whether or not
+ * Synchronous mode is supported by the USARTx instance.
+ * @rmtoll CR2 CPHA LL_USART_GetClockPhase
+ * @param USARTx USART Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_USART_PHASE_1EDGE
+ * @arg @ref LL_USART_PHASE_2EDGE
+ */
+__STATIC_INLINE uint32_t LL_USART_GetClockPhase(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_CPHA));
+}
+
+/**
+ * @brief Select the polarity of the clock output on the SCLK pin in synchronous mode
+ * @note Macro @ref IS_USART_INSTANCE(USARTx) can be used to check whether or not
+ * Synchronous mode is supported by the USARTx instance.
+ * @rmtoll CR2 CPOL LL_USART_SetClockPolarity
+ * @param USARTx USART Instance
+ * @param ClockPolarity This parameter can be one of the following values:
+ * @arg @ref LL_USART_POLARITY_LOW
+ * @arg @ref LL_USART_POLARITY_HIGH
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetClockPolarity(USART_TypeDef *USARTx, uint32_t ClockPolarity)
+{
+ MODIFY_REG(USARTx->CR2, USART_CR2_CPOL, ClockPolarity);
+}
+
+/**
+ * @brief Return polarity of the clock output on the SCLK pin in synchronous mode
+ * @note Macro @ref IS_USART_INSTANCE(USARTx) can be used to check whether or not
+ * Synchronous mode is supported by the USARTx instance.
+ * @rmtoll CR2 CPOL LL_USART_GetClockPolarity
+ * @param USARTx USART Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_USART_POLARITY_LOW
+ * @arg @ref LL_USART_POLARITY_HIGH
+ */
+__STATIC_INLINE uint32_t LL_USART_GetClockPolarity(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_CPOL));
+}
+
+/**
+ * @brief Configure Clock signal format (Phase Polarity and choice about output of last bit clock pulse)
+ * @note Macro @ref IS_USART_INSTANCE(USARTx) can be used to check whether or not
+ * Synchronous mode is supported by the USARTx instance.
+ * @note Call of this function is equivalent to following function call sequence :
+ * - Clock Phase configuration using @ref LL_USART_SetClockPhase() function
+ * - Clock Polarity configuration using @ref LL_USART_SetClockPolarity() function
+ * - Output of Last bit Clock pulse configuration using @ref LL_USART_SetLastClkPulseOutput() function
+ * @rmtoll CR2 CPHA LL_USART_ConfigClock\n
+ * CR2 CPOL LL_USART_ConfigClock\n
+ * CR2 LBCL LL_USART_ConfigClock
+ * @param USARTx USART Instance
+ * @param Phase This parameter can be one of the following values:
+ * @arg @ref LL_USART_PHASE_1EDGE
+ * @arg @ref LL_USART_PHASE_2EDGE
+ * @param Polarity This parameter can be one of the following values:
+ * @arg @ref LL_USART_POLARITY_LOW
+ * @arg @ref LL_USART_POLARITY_HIGH
+ * @param LBCPOutput This parameter can be one of the following values:
+ * @arg @ref LL_USART_LASTCLKPULSE_NO_OUTPUT
+ * @arg @ref LL_USART_LASTCLKPULSE_OUTPUT
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_ConfigClock(USART_TypeDef *USARTx, uint32_t Phase, uint32_t Polarity, uint32_t LBCPOutput)
+{
+ MODIFY_REG(USARTx->CR2, USART_CR2_CPHA | USART_CR2_CPOL | USART_CR2_LBCL, Phase | Polarity | LBCPOutput);
+}
+
+/**
+ * @brief Enable Clock output on SCLK pin
+ * @note Macro @ref IS_USART_INSTANCE(USARTx) can be used to check whether or not
+ * Synchronous mode is supported by the USARTx instance.
+ * @rmtoll CR2 CLKEN LL_USART_EnableSCLKOutput
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableSCLKOutput(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR2, USART_CR2_CLKEN);
+}
+
+/**
+ * @brief Disable Clock output on SCLK pin
+ * @note Macro @ref IS_USART_INSTANCE(USARTx) can be used to check whether or not
+ * Synchronous mode is supported by the USARTx instance.
+ * @rmtoll CR2 CLKEN LL_USART_DisableSCLKOutput
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableSCLKOutput(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR2, USART_CR2_CLKEN);
+}
+
+/**
+ * @brief Indicate if Clock output on SCLK pin is enabled
+ * @note Macro @ref IS_USART_INSTANCE(USARTx) can be used to check whether or not
+ * Synchronous mode is supported by the USARTx instance.
+ * @rmtoll CR2 CLKEN LL_USART_IsEnabledSCLKOutput
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledSCLKOutput(USART_TypeDef *USARTx)
+{
+ return ((READ_BIT(USARTx->CR2, USART_CR2_CLKEN) == (USART_CR2_CLKEN)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Set the length of the stop bits
+ * @rmtoll CR2 STOP LL_USART_SetStopBitsLength
+ * @param USARTx USART Instance
+ * @param StopBits This parameter can be one of the following values:
+ * @arg @ref LL_USART_STOPBITS_0_5 (*)
+ * @arg @ref LL_USART_STOPBITS_1
+ * @arg @ref LL_USART_STOPBITS_1_5 (*)
+ * @arg @ref LL_USART_STOPBITS_2
+ *
+ * (*) Values not available on all devices
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetStopBitsLength(USART_TypeDef *USARTx, uint32_t StopBits)
+{
+ MODIFY_REG(USARTx->CR2, USART_CR2_STOP, StopBits);
+}
+
+/**
+ * @brief Retrieve the length of the stop bits
+ * @rmtoll CR2 STOP LL_USART_GetStopBitsLength
+ * @param USARTx USART Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_USART_STOPBITS_0_5 (*)
+ * @arg @ref LL_USART_STOPBITS_1
+ * @arg @ref LL_USART_STOPBITS_1_5 (*)
+ * @arg @ref LL_USART_STOPBITS_2
+ *
+ * (*) Values not available on all devices
+ */
+__STATIC_INLINE uint32_t LL_USART_GetStopBitsLength(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_STOP));
+}
+
+/**
+ * @brief Configure Character frame format (Datawidth, Parity control, Stop Bits)
+ * @note Call of this function is equivalent to following function call sequence :
+ * - Data Width configuration using @ref LL_USART_SetDataWidth() function
+ * - Parity Control and mode configuration using @ref LL_USART_SetParity() function
+ * - Stop bits configuration using @ref LL_USART_SetStopBitsLength() function
+ * @rmtoll CR1 PS LL_USART_ConfigCharacter\n
+ * CR1 PCE LL_USART_ConfigCharacter\n
+ * CR1 M0 LL_USART_ConfigCharacter\n
+ * CR1 M1 LL_USART_ConfigCharacter\n
+ * CR2 STOP LL_USART_ConfigCharacter
+ * @param USARTx USART Instance
+ * @param DataWidth This parameter can be one of the following values:
+ * @arg @ref LL_USART_DATAWIDTH_7B (*)
+ * @arg @ref LL_USART_DATAWIDTH_8B
+ * @arg @ref LL_USART_DATAWIDTH_9B
+ * @param Parity This parameter can be one of the following values:
+ * @arg @ref LL_USART_PARITY_NONE
+ * @arg @ref LL_USART_PARITY_EVEN
+ * @arg @ref LL_USART_PARITY_ODD
+ * @param StopBits This parameter can be one of the following values:
+ * @arg @ref LL_USART_STOPBITS_0_5 (*)
+ * @arg @ref LL_USART_STOPBITS_1
+ * @arg @ref LL_USART_STOPBITS_1_5 (*)
+ * @arg @ref LL_USART_STOPBITS_2
+ *
+ * (*) Values not available on all devices
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_ConfigCharacter(USART_TypeDef *USARTx, uint32_t DataWidth, uint32_t Parity,
+ uint32_t StopBits)
+{
+ MODIFY_REG(USARTx->CR1, USART_CR1_PS | USART_CR1_PCE | USART_CR1_M, Parity | DataWidth);
+ MODIFY_REG(USARTx->CR2, USART_CR2_STOP, StopBits);
+}
+
+/**
+ * @brief Configure TX/RX pins swapping setting.
+ * @rmtoll CR2 SWAP LL_USART_SetTXRXSwap
+ * @param USARTx USART Instance
+ * @param SwapConfig This parameter can be one of the following values:
+ * @arg @ref LL_USART_TXRX_STANDARD
+ * @arg @ref LL_USART_TXRX_SWAPPED
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetTXRXSwap(USART_TypeDef *USARTx, uint32_t SwapConfig)
+{
+ MODIFY_REG(USARTx->CR2, USART_CR2_SWAP, SwapConfig);
+}
+
+/**
+ * @brief Retrieve TX/RX pins swapping configuration.
+ * @rmtoll CR2 SWAP LL_USART_GetTXRXSwap
+ * @param USARTx USART Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_USART_TXRX_STANDARD
+ * @arg @ref LL_USART_TXRX_SWAPPED
+ */
+__STATIC_INLINE uint32_t LL_USART_GetTXRXSwap(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_SWAP));
+}
+
+/**
+ * @brief Configure RX pin active level logic
+ * @rmtoll CR2 RXINV LL_USART_SetRXPinLevel
+ * @param USARTx USART Instance
+ * @param PinInvMethod This parameter can be one of the following values:
+ * @arg @ref LL_USART_RXPIN_LEVEL_STANDARD
+ * @arg @ref LL_USART_RXPIN_LEVEL_INVERTED
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetRXPinLevel(USART_TypeDef *USARTx, uint32_t PinInvMethod)
+{
+ MODIFY_REG(USARTx->CR2, USART_CR2_RXINV, PinInvMethod);
+}
+
+/**
+ * @brief Retrieve RX pin active level logic configuration
+ * @rmtoll CR2 RXINV LL_USART_GetRXPinLevel
+ * @param USARTx USART Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_USART_RXPIN_LEVEL_STANDARD
+ * @arg @ref LL_USART_RXPIN_LEVEL_INVERTED
+ */
+__STATIC_INLINE uint32_t LL_USART_GetRXPinLevel(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_RXINV));
+}
+
+/**
+ * @brief Configure TX pin active level logic
+ * @rmtoll CR2 TXINV LL_USART_SetTXPinLevel
+ * @param USARTx USART Instance
+ * @param PinInvMethod This parameter can be one of the following values:
+ * @arg @ref LL_USART_TXPIN_LEVEL_STANDARD
+ * @arg @ref LL_USART_TXPIN_LEVEL_INVERTED
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetTXPinLevel(USART_TypeDef *USARTx, uint32_t PinInvMethod)
+{
+ MODIFY_REG(USARTx->CR2, USART_CR2_TXINV, PinInvMethod);
+}
+
+/**
+ * @brief Retrieve TX pin active level logic configuration
+ * @rmtoll CR2 TXINV LL_USART_GetTXPinLevel
+ * @param USARTx USART Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_USART_TXPIN_LEVEL_STANDARD
+ * @arg @ref LL_USART_TXPIN_LEVEL_INVERTED
+ */
+__STATIC_INLINE uint32_t LL_USART_GetTXPinLevel(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_TXINV));
+}
+
+/**
+ * @brief Configure Binary data logic.
+ * @note Allow to define how Logical data from the data register are send/received :
+ * either in positive/direct logic (1=H, 0=L) or in negative/inverse logic (1=L, 0=H)
+ * @rmtoll CR2 DATAINV LL_USART_SetBinaryDataLogic
+ * @param USARTx USART Instance
+ * @param DataLogic This parameter can be one of the following values:
+ * @arg @ref LL_USART_BINARY_LOGIC_POSITIVE
+ * @arg @ref LL_USART_BINARY_LOGIC_NEGATIVE
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetBinaryDataLogic(USART_TypeDef *USARTx, uint32_t DataLogic)
+{
+ MODIFY_REG(USARTx->CR2, USART_CR2_DATAINV, DataLogic);
+}
+
+/**
+ * @brief Retrieve Binary data configuration
+ * @rmtoll CR2 DATAINV LL_USART_GetBinaryDataLogic
+ * @param USARTx USART Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_USART_BINARY_LOGIC_POSITIVE
+ * @arg @ref LL_USART_BINARY_LOGIC_NEGATIVE
+ */
+__STATIC_INLINE uint32_t LL_USART_GetBinaryDataLogic(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_DATAINV));
+}
+
+/**
+ * @brief Configure transfer bit order (either Less or Most Significant Bit First)
+ * @note MSB First means data is transmitted/received with the MSB first, following the start bit.
+ * LSB First means data is transmitted/received with data bit 0 first, following the start bit.
+ * @rmtoll CR2 MSBFIRST LL_USART_SetTransferBitOrder
+ * @param USARTx USART Instance
+ * @param BitOrder This parameter can be one of the following values:
+ * @arg @ref LL_USART_BITORDER_LSBFIRST
+ * @arg @ref LL_USART_BITORDER_MSBFIRST
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetTransferBitOrder(USART_TypeDef *USARTx, uint32_t BitOrder)
+{
+ MODIFY_REG(USARTx->CR2, USART_CR2_MSBFIRST, BitOrder);
+}
+
+/**
+ * @brief Return transfer bit order (either Less or Most Significant Bit First)
+ * @note MSB First means data is transmitted/received with the MSB first, following the start bit.
+ * LSB First means data is transmitted/received with data bit 0 first, following the start bit.
+ * @rmtoll CR2 MSBFIRST LL_USART_GetTransferBitOrder
+ * @param USARTx USART Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_USART_BITORDER_LSBFIRST
+ * @arg @ref LL_USART_BITORDER_MSBFIRST
+ */
+__STATIC_INLINE uint32_t LL_USART_GetTransferBitOrder(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_MSBFIRST));
+}
+
+/**
+ * @brief Enable Auto Baud-Rate Detection
+ * @note Macro @ref IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not
+ * Auto Baud Rate detection feature is supported by the USARTx instance.
+ * @rmtoll CR2 ABREN LL_USART_EnableAutoBaudRate
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableAutoBaudRate(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR2, USART_CR2_ABREN);
+}
+
+/**
+ * @brief Disable Auto Baud-Rate Detection
+ * @note Macro @ref IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not
+ * Auto Baud Rate detection feature is supported by the USARTx instance.
+ * @rmtoll CR2 ABREN LL_USART_DisableAutoBaudRate
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableAutoBaudRate(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR2, USART_CR2_ABREN);
+}
+
+/**
+ * @brief Indicate if Auto Baud-Rate Detection mechanism is enabled
+ * @note Macro @ref IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not
+ * Auto Baud Rate detection feature is supported by the USARTx instance.
+ * @rmtoll CR2 ABREN LL_USART_IsEnabledAutoBaud
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledAutoBaud(USART_TypeDef *USARTx)
+{
+ return ((READ_BIT(USARTx->CR2, USART_CR2_ABREN) == (USART_CR2_ABREN)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Set Auto Baud-Rate mode bits
+ * @note Macro @ref IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not
+ * Auto Baud Rate detection feature is supported by the USARTx instance.
+ * @rmtoll CR2 ABRMODE LL_USART_SetAutoBaudRateMode
+ * @param USARTx USART Instance
+ * @param AutoBaudRateMode This parameter can be one of the following values:
+ * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_STARTBIT
+ * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_FALLINGEDGE
+ * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_7F_FRAME (*)
+ * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_55_FRAME (*)
+ *
+ * (*) Values not available on all devices
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetAutoBaudRateMode(USART_TypeDef *USARTx, uint32_t AutoBaudRateMode)
+{
+ MODIFY_REG(USARTx->CR2, USART_CR2_ABRMODE, AutoBaudRateMode);
+}
+
+/**
+ * @brief Return Auto Baud-Rate mode
+ * @note Macro @ref IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not
+ * Auto Baud Rate detection feature is supported by the USARTx instance.
+ * @rmtoll CR2 ABRMODE LL_USART_GetAutoBaudRateMode
+ * @param USARTx USART Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_STARTBIT
+ * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_FALLINGEDGE
+ * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_7F_FRAME (*)
+ * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_55_FRAME (*)
+ *
+ * (*) Values not available on all devices
+ */
+__STATIC_INLINE uint32_t LL_USART_GetAutoBaudRateMode(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_ABRMODE));
+}
+
+/**
+ * @brief Enable Receiver Timeout
+ * @rmtoll CR2 RTOEN LL_USART_EnableRxTimeout
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableRxTimeout(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR2, USART_CR2_RTOEN);
+}
+
+/**
+ * @brief Disable Receiver Timeout
+ * @rmtoll CR2 RTOEN LL_USART_DisableRxTimeout
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableRxTimeout(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR2, USART_CR2_RTOEN);
+}
+
+/**
+ * @brief Indicate if Receiver Timeout feature is enabled
+ * @rmtoll CR2 RTOEN LL_USART_IsEnabledRxTimeout
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledRxTimeout(USART_TypeDef *USARTx)
+{
+ return ((READ_BIT(USARTx->CR2, USART_CR2_RTOEN) == (USART_CR2_RTOEN)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Set Address of the USART node.
+ * @note This is used in multiprocessor communication during Mute mode or Stop mode,
+ * for wake up with address mark detection.
+ * @note 4bits address node is used when 4-bit Address Detection is selected in ADDM7.
+ * (b7-b4 should be set to 0)
+ * 8bits address node is used when 7-bit Address Detection is selected in ADDM7.
+ * (This is used in multiprocessor communication during Mute mode or Stop mode,
+ * for wake up with 7-bit address mark detection.
+ * The MSB of the character sent by the transmitter should be equal to 1.
+ * It may also be used for character detection during normal reception,
+ * Mute mode inactive (for example, end of block detection in ModBus protocol).
+ * In this case, the whole received character (8-bit) is compared to the ADD[7:0]
+ * value and CMF flag is set on match)
+ * @rmtoll CR2 ADD LL_USART_ConfigNodeAddress\n
+ * CR2 ADDM7 LL_USART_ConfigNodeAddress
+ * @param USARTx USART Instance
+ * @param AddressLen This parameter can be one of the following values:
+ * @arg @ref LL_USART_ADDRESS_DETECT_4B
+ * @arg @ref LL_USART_ADDRESS_DETECT_7B
+ * @param NodeAddress 4 or 7 bit Address of the USART node.
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_ConfigNodeAddress(USART_TypeDef *USARTx, uint32_t AddressLen, uint32_t NodeAddress)
+{
+ MODIFY_REG(USARTx->CR2, USART_CR2_ADD | USART_CR2_ADDM7,
+ (uint32_t)(AddressLen | (NodeAddress << USART_CR2_ADD_Pos)));
+}
+
+/**
+ * @brief Return 8 bit Address of the USART node as set in ADD field of CR2.
+ * @note If 4-bit Address Detection is selected in ADDM7,
+ * only 4bits (b3-b0) of returned value are relevant (b31-b4 are not relevant)
+ * If 7-bit Address Detection is selected in ADDM7,
+ * only 8bits (b7-b0) of returned value are relevant (b31-b8 are not relevant)
+ * @rmtoll CR2 ADD LL_USART_GetNodeAddress
+ * @param USARTx USART Instance
+ * @retval Address of the USART node (Value between Min_Data=0 and Max_Data=255)
+ */
+__STATIC_INLINE uint32_t LL_USART_GetNodeAddress(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_ADD) >> USART_CR2_ADD_Pos);
+}
+
+/**
+ * @brief Return Length of Node Address used in Address Detection mode (7-bit or 4-bit)
+ * @rmtoll CR2 ADDM7 LL_USART_GetNodeAddressLen
+ * @param USARTx USART Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_USART_ADDRESS_DETECT_4B
+ * @arg @ref LL_USART_ADDRESS_DETECT_7B
+ */
+__STATIC_INLINE uint32_t LL_USART_GetNodeAddressLen(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_ADDM7));
+}
+
+/**
+ * @brief Enable RTS HW Flow Control
+ * @note Macro @ref IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not
+ * Hardware Flow control feature is supported by the USARTx instance.
+ * @rmtoll CR3 RTSE LL_USART_EnableRTSHWFlowCtrl
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableRTSHWFlowCtrl(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR3, USART_CR3_RTSE);
+}
+
+/**
+ * @brief Disable RTS HW Flow Control
+ * @note Macro @ref IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not
+ * Hardware Flow control feature is supported by the USARTx instance.
+ * @rmtoll CR3 RTSE LL_USART_DisableRTSHWFlowCtrl
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableRTSHWFlowCtrl(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR3, USART_CR3_RTSE);
+}
+
+/**
+ * @brief Enable CTS HW Flow Control
+ * @note Macro @ref IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not
+ * Hardware Flow control feature is supported by the USARTx instance.
+ * @rmtoll CR3 CTSE LL_USART_EnableCTSHWFlowCtrl
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableCTSHWFlowCtrl(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR3, USART_CR3_CTSE);
+}
+
+/**
+ * @brief Disable CTS HW Flow Control
+ * @note Macro @ref IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not
+ * Hardware Flow control feature is supported by the USARTx instance.
+ * @rmtoll CR3 CTSE LL_USART_DisableCTSHWFlowCtrl
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableCTSHWFlowCtrl(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR3, USART_CR3_CTSE);
+}
+
+/**
+ * @brief Configure HW Flow Control mode (both CTS and RTS)
+ * @note Macro @ref IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not
+ * Hardware Flow control feature is supported by the USARTx instance.
+ * @rmtoll CR3 RTSE LL_USART_SetHWFlowCtrl\n
+ * CR3 CTSE LL_USART_SetHWFlowCtrl
+ * @param USARTx USART Instance
+ * @param HardwareFlowControl This parameter can be one of the following values:
+ * @arg @ref LL_USART_HWCONTROL_NONE
+ * @arg @ref LL_USART_HWCONTROL_RTS
+ * @arg @ref LL_USART_HWCONTROL_CTS
+ * @arg @ref LL_USART_HWCONTROL_RTS_CTS
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetHWFlowCtrl(USART_TypeDef *USARTx, uint32_t HardwareFlowControl)
+{
+ MODIFY_REG(USARTx->CR3, USART_CR3_RTSE | USART_CR3_CTSE, HardwareFlowControl);
+}
+
+/**
+ * @brief Return HW Flow Control configuration (both CTS and RTS)
+ * @note Macro @ref IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not
+ * Hardware Flow control feature is supported by the USARTx instance.
+ * @rmtoll CR3 RTSE LL_USART_GetHWFlowCtrl\n
+ * CR3 CTSE LL_USART_GetHWFlowCtrl
+ * @param USARTx USART Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_USART_HWCONTROL_NONE
+ * @arg @ref LL_USART_HWCONTROL_RTS
+ * @arg @ref LL_USART_HWCONTROL_CTS
+ * @arg @ref LL_USART_HWCONTROL_RTS_CTS
+ */
+__STATIC_INLINE uint32_t LL_USART_GetHWFlowCtrl(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->CR3, USART_CR3_RTSE | USART_CR3_CTSE));
+}
+
+/**
+ * @brief Enable One bit sampling method
+ * @rmtoll CR3 ONEBIT LL_USART_EnableOneBitSamp
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableOneBitSamp(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR3, USART_CR3_ONEBIT);
+}
+
+/**
+ * @brief Disable One bit sampling method
+ * @rmtoll CR3 ONEBIT LL_USART_DisableOneBitSamp
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableOneBitSamp(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR3, USART_CR3_ONEBIT);
+}
+
+/**
+ * @brief Indicate if One bit sampling method is enabled
+ * @rmtoll CR3 ONEBIT LL_USART_IsEnabledOneBitSamp
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledOneBitSamp(USART_TypeDef *USARTx)
+{
+ return ((READ_BIT(USARTx->CR3, USART_CR3_ONEBIT) == (USART_CR3_ONEBIT)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Enable Overrun detection
+ * @rmtoll CR3 OVRDIS LL_USART_EnableOverrunDetect
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableOverrunDetect(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR3, USART_CR3_OVRDIS);
+}
+
+/**
+ * @brief Disable Overrun detection
+ * @rmtoll CR3 OVRDIS LL_USART_DisableOverrunDetect
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableOverrunDetect(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR3, USART_CR3_OVRDIS);
+}
+
+/**
+ * @brief Indicate if Overrun detection is enabled
+ * @rmtoll CR3 OVRDIS LL_USART_IsEnabledOverrunDetect
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledOverrunDetect(USART_TypeDef *USARTx)
+{
+ return ((READ_BIT(USARTx->CR3, USART_CR3_OVRDIS) != USART_CR3_OVRDIS) ? 1UL : 0UL);
+}
+
+#if defined(USART_CR1_UESM)
+/**
+ * @brief Select event type for Wake UP Interrupt Flag (WUS[1:0] bits)
+ * @note Macro @ref IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not
+ * Wake-up from Stop mode feature is supported by the USARTx instance.
+ * @rmtoll CR3 WUS LL_USART_SetWKUPType
+ * @param USARTx USART Instance
+ * @param Type This parameter can be one of the following values:
+ * @arg @ref LL_USART_WAKEUP_ON_ADDRESS
+ * @arg @ref LL_USART_WAKEUP_ON_STARTBIT
+ * @arg @ref LL_USART_WAKEUP_ON_RXNE
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetWKUPType(USART_TypeDef *USARTx, uint32_t Type)
+{
+ MODIFY_REG(USARTx->CR3, USART_CR3_WUS, Type);
+}
+
+/**
+ * @brief Return event type for Wake UP Interrupt Flag (WUS[1:0] bits)
+ * @note Macro @ref IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not
+ * Wake-up from Stop mode feature is supported by the USARTx instance.
+ * @rmtoll CR3 WUS LL_USART_GetWKUPType
+ * @param USARTx USART Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_USART_WAKEUP_ON_ADDRESS
+ * @arg @ref LL_USART_WAKEUP_ON_STARTBIT
+ * @arg @ref LL_USART_WAKEUP_ON_RXNE
+ */
+__STATIC_INLINE uint32_t LL_USART_GetWKUPType(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->CR3, USART_CR3_WUS));
+}
+
+#endif /* USART_CR1_UESM */
+/**
+ * @brief Configure USART BRR register for achieving expected Baud Rate value.
+ * @note Compute and set USARTDIV value in BRR Register (full BRR content)
+ * according to used Peripheral Clock, Oversampling mode, and expected Baud Rate values
+ * @note Peripheral clock and Baud rate values provided as function parameters should be valid
+ * (Baud rate value != 0)
+ * @note In case of oversampling by 16 and 8, BRR content must be greater than or equal to 16d.
+ * @rmtoll BRR BRR LL_USART_SetBaudRate
+ * @param USARTx USART Instance
+ * @param PeriphClk Peripheral Clock
+ * @param OverSampling This parameter can be one of the following values:
+ * @arg @ref LL_USART_OVERSAMPLING_16
+ * @arg @ref LL_USART_OVERSAMPLING_8
+ * @param BaudRate Baud Rate
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetBaudRate(USART_TypeDef *USARTx, uint32_t PeriphClk, uint32_t OverSampling,
+ uint32_t BaudRate)
+{
+ uint32_t usartdiv;
+ register uint32_t brrtemp;
+
+ if (OverSampling == LL_USART_OVERSAMPLING_8)
+ {
+ usartdiv = (uint16_t)(__LL_USART_DIV_SAMPLING8(PeriphClk, BaudRate));
+ brrtemp = usartdiv & 0xFFF0U;
+ brrtemp |= (uint16_t)((usartdiv & (uint16_t)0x000FU) >> 1U);
+ USARTx->BRR = brrtemp;
+ }
+ else
+ {
+ USARTx->BRR = (uint16_t)(__LL_USART_DIV_SAMPLING16(PeriphClk, BaudRate));
+ }
+}
+
+/**
+ * @brief Return current Baud Rate value, according to USARTDIV present in BRR register
+ * (full BRR content), and to used Peripheral Clock and Oversampling mode values
+ * @note In case of non-initialized or invalid value stored in BRR register, value 0 will be returned.
+ * @note In case of oversampling by 16 and 8, BRR content must be greater than or equal to 16d.
+ * @rmtoll BRR BRR LL_USART_GetBaudRate
+ * @param USARTx USART Instance
+ * @param PeriphClk Peripheral Clock
+ * @param OverSampling This parameter can be one of the following values:
+ * @arg @ref LL_USART_OVERSAMPLING_16
+ * @arg @ref LL_USART_OVERSAMPLING_8
+ * @retval Baud Rate
+ */
+__STATIC_INLINE uint32_t LL_USART_GetBaudRate(USART_TypeDef *USARTx, uint32_t PeriphClk, uint32_t OverSampling)
+{
+ register uint32_t usartdiv;
+ register uint32_t brrresult = 0x0U;
+
+ usartdiv = USARTx->BRR;
+
+ if (usartdiv == 0U)
+ {
+ /* Do not perform a division by 0 */
+ }
+ else if (OverSampling == LL_USART_OVERSAMPLING_8)
+ {
+ usartdiv = (uint16_t)((usartdiv & 0xFFF0U) | ((usartdiv & 0x0007U) << 1U)) ;
+ if (usartdiv != 0U)
+ {
+ brrresult = (PeriphClk * 2U) / usartdiv;
+ }
+ }
+ else
+ {
+ if ((usartdiv & 0xFFFFU) != 0U)
+ {
+ brrresult = PeriphClk / usartdiv;
+ }
+ }
+ return (brrresult);
+}
+
+/**
+ * @brief Set Receiver Time Out Value (expressed in nb of bits duration)
+ * @rmtoll RTOR RTO LL_USART_SetRxTimeout
+ * @param USARTx USART Instance
+ * @param Timeout Value between Min_Data=0x00 and Max_Data=0x00FFFFFF
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetRxTimeout(USART_TypeDef *USARTx, uint32_t Timeout)
+{
+ MODIFY_REG(USARTx->RTOR, USART_RTOR_RTO, Timeout);
+}
+
+/**
+ * @brief Get Receiver Time Out Value (expressed in nb of bits duration)
+ * @rmtoll RTOR RTO LL_USART_GetRxTimeout
+ * @param USARTx USART Instance
+ * @retval Value between Min_Data=0x00 and Max_Data=0x00FFFFFF
+ */
+__STATIC_INLINE uint32_t LL_USART_GetRxTimeout(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->RTOR, USART_RTOR_RTO));
+}
+
+#if defined(USART_SMARTCARD_SUPPORT)
+/**
+ * @brief Set Block Length value in reception
+ * @rmtoll RTOR BLEN LL_USART_SetBlockLength
+ * @param USARTx USART Instance
+ * @param BlockLength Value between Min_Data=0x00 and Max_Data=0xFF
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetBlockLength(USART_TypeDef *USARTx, uint32_t BlockLength)
+{
+ MODIFY_REG(USARTx->RTOR, USART_RTOR_BLEN, BlockLength << USART_RTOR_BLEN_Pos);
+}
+
+/**
+ * @brief Get Block Length value in reception
+ * @rmtoll RTOR BLEN LL_USART_GetBlockLength
+ * @param USARTx USART Instance
+ * @retval Value between Min_Data=0x00 and Max_Data=0xFF
+ */
+__STATIC_INLINE uint32_t LL_USART_GetBlockLength(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->RTOR, USART_RTOR_BLEN) >> USART_RTOR_BLEN_Pos);
+}
+#endif /* USART_SMARTCARD_SUPPORT */
+
+/**
+ * @}
+ */
+
+#if defined(USART_IRDA_SUPPORT)
+/** @defgroup USART_LL_EF_Configuration_IRDA Configuration functions related to Irda feature
+ * @{
+ */
+
+/**
+ * @brief Enable IrDA mode
+ * @note Macro @ref IS_IRDA_INSTANCE(USARTx) can be used to check whether or not
+ * IrDA feature is supported by the USARTx instance.
+ * @rmtoll CR3 IREN LL_USART_EnableIrda
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableIrda(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR3, USART_CR3_IREN);
+}
+
+/**
+ * @brief Disable IrDA mode
+ * @note Macro @ref IS_IRDA_INSTANCE(USARTx) can be used to check whether or not
+ * IrDA feature is supported by the USARTx instance.
+ * @rmtoll CR3 IREN LL_USART_DisableIrda
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableIrda(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR3, USART_CR3_IREN);
+}
+
+/**
+ * @brief Indicate if IrDA mode is enabled
+ * @note Macro @ref IS_IRDA_INSTANCE(USARTx) can be used to check whether or not
+ * IrDA feature is supported by the USARTx instance.
+ * @rmtoll CR3 IREN LL_USART_IsEnabledIrda
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledIrda(USART_TypeDef *USARTx)
+{
+ return ((READ_BIT(USARTx->CR3, USART_CR3_IREN) == (USART_CR3_IREN)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Configure IrDA Power Mode (Normal or Low Power)
+ * @note Macro @ref IS_IRDA_INSTANCE(USARTx) can be used to check whether or not
+ * IrDA feature is supported by the USARTx instance.
+ * @rmtoll CR3 IRLP LL_USART_SetIrdaPowerMode
+ * @param USARTx USART Instance
+ * @param PowerMode This parameter can be one of the following values:
+ * @arg @ref LL_USART_IRDA_POWER_NORMAL
+ * @arg @ref LL_USART_IRDA_POWER_LOW
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetIrdaPowerMode(USART_TypeDef *USARTx, uint32_t PowerMode)
+{
+ MODIFY_REG(USARTx->CR3, USART_CR3_IRLP, PowerMode);
+}
+
+/**
+ * @brief Retrieve IrDA Power Mode configuration (Normal or Low Power)
+ * @note Macro @ref IS_IRDA_INSTANCE(USARTx) can be used to check whether or not
+ * IrDA feature is supported by the USARTx instance.
+ * @rmtoll CR3 IRLP LL_USART_GetIrdaPowerMode
+ * @param USARTx USART Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_USART_IRDA_POWER_NORMAL
+ * @arg @ref LL_USART_PHASE_2EDGE
+ */
+__STATIC_INLINE uint32_t LL_USART_GetIrdaPowerMode(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->CR3, USART_CR3_IRLP));
+}
+
+/**
+ * @brief Set Irda prescaler value, used for dividing the USART clock source
+ * to achieve the Irda Low Power frequency (8 bits value)
+ * @note Macro @ref IS_IRDA_INSTANCE(USARTx) can be used to check whether or not
+ * IrDA feature is supported by the USARTx instance.
+ * @rmtoll GTPR PSC LL_USART_SetIrdaPrescaler
+ * @param USARTx USART Instance
+ * @param PrescalerValue Value between Min_Data=0x00 and Max_Data=0xFF
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetIrdaPrescaler(USART_TypeDef *USARTx, uint32_t PrescalerValue)
+{
+ MODIFY_REG(USARTx->GTPR, (uint16_t)USART_GTPR_PSC, (uint16_t)PrescalerValue);
+}
+
+/**
+ * @brief Return Irda prescaler value, used for dividing the USART clock source
+ * to achieve the Irda Low Power frequency (8 bits value)
+ * @note Macro @ref IS_IRDA_INSTANCE(USARTx) can be used to check whether or not
+ * IrDA feature is supported by the USARTx instance.
+ * @rmtoll GTPR PSC LL_USART_GetIrdaPrescaler
+ * @param USARTx USART Instance
+ * @retval Irda prescaler value (Value between Min_Data=0x00 and Max_Data=0xFF)
+ */
+__STATIC_INLINE uint32_t LL_USART_GetIrdaPrescaler(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->GTPR, USART_GTPR_PSC));
+}
+
+/**
+ * @}
+ */
+#endif /* USART_IRDA_SUPPORT */
+
+#if defined(USART_SMARTCARD_SUPPORT)
+/** @defgroup USART_LL_EF_Configuration_Smartcard Configuration functions related to Smartcard feature
+ * @{
+ */
+
+/**
+ * @brief Enable Smartcard NACK transmission
+ * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not
+ * Smartcard feature is supported by the USARTx instance.
+ * @rmtoll CR3 NACK LL_USART_EnableSmartcardNACK
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableSmartcardNACK(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR3, USART_CR3_NACK);
+}
+
+/**
+ * @brief Disable Smartcard NACK transmission
+ * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not
+ * Smartcard feature is supported by the USARTx instance.
+ * @rmtoll CR3 NACK LL_USART_DisableSmartcardNACK
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableSmartcardNACK(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR3, USART_CR3_NACK);
+}
+
+/**
+ * @brief Indicate if Smartcard NACK transmission is enabled
+ * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not
+ * Smartcard feature is supported by the USARTx instance.
+ * @rmtoll CR3 NACK LL_USART_IsEnabledSmartcardNACK
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledSmartcardNACK(USART_TypeDef *USARTx)
+{
+ return ((READ_BIT(USARTx->CR3, USART_CR3_NACK) == (USART_CR3_NACK)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Enable Smartcard mode
+ * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not
+ * Smartcard feature is supported by the USARTx instance.
+ * @rmtoll CR3 SCEN LL_USART_EnableSmartcard
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableSmartcard(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR3, USART_CR3_SCEN);
+}
+
+/**
+ * @brief Disable Smartcard mode
+ * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not
+ * Smartcard feature is supported by the USARTx instance.
+ * @rmtoll CR3 SCEN LL_USART_DisableSmartcard
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableSmartcard(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR3, USART_CR3_SCEN);
+}
+
+/**
+ * @brief Indicate if Smartcard mode is enabled
+ * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not
+ * Smartcard feature is supported by the USARTx instance.
+ * @rmtoll CR3 SCEN LL_USART_IsEnabledSmartcard
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledSmartcard(USART_TypeDef *USARTx)
+{
+ return ((READ_BIT(USARTx->CR3, USART_CR3_SCEN) == (USART_CR3_SCEN)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Set Smartcard Auto-Retry Count value (SCARCNT[2:0] bits)
+ * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not
+ * Smartcard feature is supported by the USARTx instance.
+ * @note This bit-field specifies the number of retries in transmit and receive, in Smartcard mode.
+ * In transmission mode, it specifies the number of automatic retransmission retries, before
+ * generating a transmission error (FE bit set).
+ * In reception mode, it specifies the number or erroneous reception trials, before generating a
+ * reception error (RXNE and PE bits set)
+ * @rmtoll CR3 SCARCNT LL_USART_SetSmartcardAutoRetryCount
+ * @param USARTx USART Instance
+ * @param AutoRetryCount Value between Min_Data=0 and Max_Data=7
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetSmartcardAutoRetryCount(USART_TypeDef *USARTx, uint32_t AutoRetryCount)
+{
+ MODIFY_REG(USARTx->CR3, USART_CR3_SCARCNT, AutoRetryCount << USART_CR3_SCARCNT_Pos);
+}
+
+/**
+ * @brief Return Smartcard Auto-Retry Count value (SCARCNT[2:0] bits)
+ * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not
+ * Smartcard feature is supported by the USARTx instance.
+ * @rmtoll CR3 SCARCNT LL_USART_GetSmartcardAutoRetryCount
+ * @param USARTx USART Instance
+ * @retval Smartcard Auto-Retry Count value (Value between Min_Data=0 and Max_Data=7)
+ */
+__STATIC_INLINE uint32_t LL_USART_GetSmartcardAutoRetryCount(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->CR3, USART_CR3_SCARCNT) >> USART_CR3_SCARCNT_Pos);
+}
+
+/**
+ * @brief Set Smartcard prescaler value, used for dividing the USART clock
+ * source to provide the SMARTCARD Clock (5 bits value)
+ * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not
+ * Smartcard feature is supported by the USARTx instance.
+ * @rmtoll GTPR PSC LL_USART_SetSmartcardPrescaler
+ * @param USARTx USART Instance
+ * @param PrescalerValue Value between Min_Data=0 and Max_Data=31
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetSmartcardPrescaler(USART_TypeDef *USARTx, uint32_t PrescalerValue)
+{
+ MODIFY_REG(USARTx->GTPR, (uint16_t)USART_GTPR_PSC, (uint16_t)PrescalerValue);
+}
+
+/**
+ * @brief Return Smartcard prescaler value, used for dividing the USART clock
+ * source to provide the SMARTCARD Clock (5 bits value)
+ * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not
+ * Smartcard feature is supported by the USARTx instance.
+ * @rmtoll GTPR PSC LL_USART_GetSmartcardPrescaler
+ * @param USARTx USART Instance
+ * @retval Smartcard prescaler value (Value between Min_Data=0 and Max_Data=31)
+ */
+__STATIC_INLINE uint32_t LL_USART_GetSmartcardPrescaler(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->GTPR, USART_GTPR_PSC));
+}
+
+/**
+ * @brief Set Smartcard Guard time value, expressed in nb of baud clocks periods
+ * (GT[7:0] bits : Guard time value)
+ * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not
+ * Smartcard feature is supported by the USARTx instance.
+ * @rmtoll GTPR GT LL_USART_SetSmartcardGuardTime
+ * @param USARTx USART Instance
+ * @param GuardTime Value between Min_Data=0x00 and Max_Data=0xFF
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetSmartcardGuardTime(USART_TypeDef *USARTx, uint32_t GuardTime)
+{
+ MODIFY_REG(USARTx->GTPR, (uint16_t)USART_GTPR_GT, (uint16_t)(GuardTime << USART_GTPR_GT_Pos));
+}
+
+/**
+ * @brief Return Smartcard Guard time value, expressed in nb of baud clocks periods
+ * (GT[7:0] bits : Guard time value)
+ * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not
+ * Smartcard feature is supported by the USARTx instance.
+ * @rmtoll GTPR GT LL_USART_GetSmartcardGuardTime
+ * @param USARTx USART Instance
+ * @retval Smartcard Guard time value (Value between Min_Data=0x00 and Max_Data=0xFF)
+ */
+__STATIC_INLINE uint32_t LL_USART_GetSmartcardGuardTime(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->GTPR, USART_GTPR_GT) >> USART_GTPR_GT_Pos);
+}
+
+/**
+ * @}
+ */
+#endif /* USART_SMARTCARD_SUPPORT */
+
+/** @defgroup USART_LL_EF_Configuration_HalfDuplex Configuration functions related to Half Duplex feature
+ * @{
+ */
+
+/**
+ * @brief Enable Single Wire Half-Duplex mode
+ * @note Macro @ref IS_UART_HALFDUPLEX_INSTANCE(USARTx) can be used to check whether or not
+ * Half-Duplex mode is supported by the USARTx instance.
+ * @rmtoll CR3 HDSEL LL_USART_EnableHalfDuplex
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableHalfDuplex(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR3, USART_CR3_HDSEL);
+}
+
+/**
+ * @brief Disable Single Wire Half-Duplex mode
+ * @note Macro @ref IS_UART_HALFDUPLEX_INSTANCE(USARTx) can be used to check whether or not
+ * Half-Duplex mode is supported by the USARTx instance.
+ * @rmtoll CR3 HDSEL LL_USART_DisableHalfDuplex
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableHalfDuplex(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR3, USART_CR3_HDSEL);
+}
+
+/**
+ * @brief Indicate if Single Wire Half-Duplex mode is enabled
+ * @note Macro @ref IS_UART_HALFDUPLEX_INSTANCE(USARTx) can be used to check whether or not
+ * Half-Duplex mode is supported by the USARTx instance.
+ * @rmtoll CR3 HDSEL LL_USART_IsEnabledHalfDuplex
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledHalfDuplex(USART_TypeDef *USARTx)
+{
+ return ((READ_BIT(USARTx->CR3, USART_CR3_HDSEL) == (USART_CR3_HDSEL)) ? 1UL : 0UL);
+}
+
+/**
+ * @}
+ */
+
+#if defined(USART_LIN_SUPPORT)
+/** @defgroup USART_LL_EF_Configuration_LIN Configuration functions related to LIN feature
+ * @{
+ */
+
+/**
+ * @brief Set LIN Break Detection Length
+ * @note Macro @ref IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not
+ * LIN feature is supported by the USARTx instance.
+ * @rmtoll CR2 LBDL LL_USART_SetLINBrkDetectionLen
+ * @param USARTx USART Instance
+ * @param LINBDLength This parameter can be one of the following values:
+ * @arg @ref LL_USART_LINBREAK_DETECT_10B
+ * @arg @ref LL_USART_LINBREAK_DETECT_11B
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetLINBrkDetectionLen(USART_TypeDef *USARTx, uint32_t LINBDLength)
+{
+ MODIFY_REG(USARTx->CR2, USART_CR2_LBDL, LINBDLength);
+}
+
+/**
+ * @brief Return LIN Break Detection Length
+ * @note Macro @ref IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not
+ * LIN feature is supported by the USARTx instance.
+ * @rmtoll CR2 LBDL LL_USART_GetLINBrkDetectionLen
+ * @param USARTx USART Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_USART_LINBREAK_DETECT_10B
+ * @arg @ref LL_USART_LINBREAK_DETECT_11B
+ */
+__STATIC_INLINE uint32_t LL_USART_GetLINBrkDetectionLen(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_LBDL));
+}
+
+/**
+ * @brief Enable LIN mode
+ * @note Macro @ref IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not
+ * LIN feature is supported by the USARTx instance.
+ * @rmtoll CR2 LINEN LL_USART_EnableLIN
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableLIN(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR2, USART_CR2_LINEN);
+}
+
+/**
+ * @brief Disable LIN mode
+ * @note Macro @ref IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not
+ * LIN feature is supported by the USARTx instance.
+ * @rmtoll CR2 LINEN LL_USART_DisableLIN
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableLIN(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR2, USART_CR2_LINEN);
+}
+
+/**
+ * @brief Indicate if LIN mode is enabled
+ * @note Macro @ref IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not
+ * LIN feature is supported by the USARTx instance.
+ * @rmtoll CR2 LINEN LL_USART_IsEnabledLIN
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledLIN(USART_TypeDef *USARTx)
+{
+ return ((READ_BIT(USARTx->CR2, USART_CR2_LINEN) == (USART_CR2_LINEN)) ? 1UL : 0UL);
+}
+
+/**
+ * @}
+ */
+#endif /* USART_LIN_SUPPORT */
+
+/** @defgroup USART_LL_EF_Configuration_DE Configuration functions related to Driver Enable feature
+ * @{
+ */
+
+/**
+ * @brief Set DEDT (Driver Enable De-Assertion Time), Time value expressed on 5 bits ([4:0] bits).
+ * @note Macro @ref IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not
+ * Driver Enable feature is supported by the USARTx instance.
+ * @rmtoll CR1 DEDT LL_USART_SetDEDeassertionTime
+ * @param USARTx USART Instance
+ * @param Time Value between Min_Data=0 and Max_Data=31
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetDEDeassertionTime(USART_TypeDef *USARTx, uint32_t Time)
+{
+ MODIFY_REG(USARTx->CR1, USART_CR1_DEDT, Time << USART_CR1_DEDT_Pos);
+}
+
+/**
+ * @brief Return DEDT (Driver Enable De-Assertion Time)
+ * @note Macro @ref IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not
+ * Driver Enable feature is supported by the USARTx instance.
+ * @rmtoll CR1 DEDT LL_USART_GetDEDeassertionTime
+ * @param USARTx USART Instance
+ * @retval Time value expressed on 5 bits ([4:0] bits) : Value between Min_Data=0 and Max_Data=31
+ */
+__STATIC_INLINE uint32_t LL_USART_GetDEDeassertionTime(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_DEDT) >> USART_CR1_DEDT_Pos);
+}
+
+/**
+ * @brief Set DEAT (Driver Enable Assertion Time), Time value expressed on 5 bits ([4:0] bits).
+ * @note Macro @ref IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not
+ * Driver Enable feature is supported by the USARTx instance.
+ * @rmtoll CR1 DEAT LL_USART_SetDEAssertionTime
+ * @param USARTx USART Instance
+ * @param Time Value between Min_Data=0 and Max_Data=31
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetDEAssertionTime(USART_TypeDef *USARTx, uint32_t Time)
+{
+ MODIFY_REG(USARTx->CR1, USART_CR1_DEAT, Time << USART_CR1_DEAT_Pos);
+}
+
+/**
+ * @brief Return DEAT (Driver Enable Assertion Time)
+ * @note Macro @ref IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not
+ * Driver Enable feature is supported by the USARTx instance.
+ * @rmtoll CR1 DEAT LL_USART_GetDEAssertionTime
+ * @param USARTx USART Instance
+ * @retval Time value expressed on 5 bits ([4:0] bits) : Value between Min_Data=0 and Max_Data=31
+ */
+__STATIC_INLINE uint32_t LL_USART_GetDEAssertionTime(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_DEAT) >> USART_CR1_DEAT_Pos);
+}
+
+/**
+ * @brief Enable Driver Enable (DE) Mode
+ * @note Macro @ref IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not
+ * Driver Enable feature is supported by the USARTx instance.
+ * @rmtoll CR3 DEM LL_USART_EnableDEMode
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableDEMode(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR3, USART_CR3_DEM);
+}
+
+/**
+ * @brief Disable Driver Enable (DE) Mode
+ * @note Macro @ref IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not
+ * Driver Enable feature is supported by the USARTx instance.
+ * @rmtoll CR3 DEM LL_USART_DisableDEMode
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableDEMode(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR3, USART_CR3_DEM);
+}
+
+/**
+ * @brief Indicate if Driver Enable (DE) Mode is enabled
+ * @note Macro @ref IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not
+ * Driver Enable feature is supported by the USARTx instance.
+ * @rmtoll CR3 DEM LL_USART_IsEnabledDEMode
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledDEMode(USART_TypeDef *USARTx)
+{
+ return ((READ_BIT(USARTx->CR3, USART_CR3_DEM) == (USART_CR3_DEM)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Select Driver Enable Polarity
+ * @note Macro @ref IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not
+ * Driver Enable feature is supported by the USARTx instance.
+ * @rmtoll CR3 DEP LL_USART_SetDESignalPolarity
+ * @param USARTx USART Instance
+ * @param Polarity This parameter can be one of the following values:
+ * @arg @ref LL_USART_DE_POLARITY_HIGH
+ * @arg @ref LL_USART_DE_POLARITY_LOW
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_SetDESignalPolarity(USART_TypeDef *USARTx, uint32_t Polarity)
+{
+ MODIFY_REG(USARTx->CR3, USART_CR3_DEP, Polarity);
+}
+
+/**
+ * @brief Return Driver Enable Polarity
+ * @note Macro @ref IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not
+ * Driver Enable feature is supported by the USARTx instance.
+ * @rmtoll CR3 DEP LL_USART_GetDESignalPolarity
+ * @param USARTx USART Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_USART_DE_POLARITY_HIGH
+ * @arg @ref LL_USART_DE_POLARITY_LOW
+ */
+__STATIC_INLINE uint32_t LL_USART_GetDESignalPolarity(USART_TypeDef *USARTx)
+{
+ return (uint32_t)(READ_BIT(USARTx->CR3, USART_CR3_DEP));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EF_AdvancedConfiguration Advanced Configurations services
+ * @{
+ */
+
+/**
+ * @brief Perform basic configuration of USART for enabling use in Asynchronous Mode (UART)
+ * @note In UART mode, the following bits must be kept cleared:
+ * - LINEN bit in the USART_CR2 register (if LIN feature is supported),
+ * - CLKEN bit in the USART_CR2 register,
+ * - SCEN bit in the USART_CR3 register (if Smartcard feature is supported),
+ * - IREN bit in the USART_CR3 register (if Irda feature is supported),
+ * - HDSEL bit in the USART_CR3 register.
+ * @note Call of this function is equivalent to following function call sequence :
+ * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function (if LIN feature is supported)
+ * - Clear CLKEN in CR2 using @ref LL_USART_DisableSCLKOutput() function
+ * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function (if Smartcard feature is supported)
+ * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function (if Irda feature is supported)
+ * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function
+ * @note Other remaining configurations items related to Asynchronous Mode
+ * (as Baud Rate, Word length, Parity, ...) should be set using
+ * dedicated functions
+ * @rmtoll CR2 LINEN LL_USART_ConfigAsyncMode\n
+ * CR2 CLKEN LL_USART_ConfigAsyncMode\n
+ * CR3 SCEN LL_USART_ConfigAsyncMode\n
+ * CR3 IREN LL_USART_ConfigAsyncMode\n
+ * CR3 HDSEL LL_USART_ConfigAsyncMode
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_ConfigAsyncMode(USART_TypeDef *USARTx)
+{
+ /* In Asynchronous mode, the following bits must be kept cleared:
+ - LINEN (if LIN feature is supported), CLKEN bits in the USART_CR2 register,
+ - SCEN (if Smartcard feature is supported), IREN (if Irda feature is supported) and HDSEL bits in the USART_CR3 register.
+ */
+#if defined(USART_LIN_SUPPORT)
+ CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN));
+#else
+ CLEAR_BIT(USARTx->CR2, USART_CR2_CLKEN);
+#endif /* USART_LIN_SUPPORT */
+#if defined(USART_SMARTCARD_SUPPORT)
+#if defined(USART_IRDA_SUPPORT)
+ CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_IREN | USART_CR3_HDSEL));
+#else
+ CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL));
+#endif /* USART_IRDA_SUPPORT */
+#else
+#if defined(USART_IRDA_SUPPORT)
+ CLEAR_BIT(USARTx->CR3, (USART_CR3_IREN | USART_CR3_HDSEL));
+#else
+ CLEAR_BIT(USARTx->CR3, USART_CR3_HDSEL);
+#endif /* USART_IRDA_SUPPORT */
+#endif /* USART_SMARTCARD_SUPPORT */
+}
+
+/**
+ * @brief Perform basic configuration of USART for enabling use in Synchronous Mode
+ * @note In Synchronous mode, the following bits must be kept cleared:
+ * - LINEN bit in the USART_CR2 register (if LIN feature is supported),
+ * - SCEN bit in the USART_CR3 register (if Smartcard feature is supported),
+ * - IREN bit in the USART_CR3 register (if Irda feature is supported),
+ * - HDSEL bit in the USART_CR3 register.
+ * This function also sets the USART in Synchronous mode.
+ * @note Macro @ref IS_USART_INSTANCE(USARTx) can be used to check whether or not
+ * Synchronous mode is supported by the USARTx instance.
+ * @note Call of this function is equivalent to following function call sequence :
+ * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function (if LIN feature is supported)
+ * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function (if Irda feature is supported)
+ * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function (if Smartcard feature is supported)
+ * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function
+ * - Set CLKEN in CR2 using @ref LL_USART_EnableSCLKOutput() function
+ * @note Other remaining configurations items related to Synchronous Mode
+ * (as Baud Rate, Word length, Parity, Clock Polarity, ...) should be set using
+ * dedicated functions
+ * @rmtoll CR2 LINEN LL_USART_ConfigSyncMode\n
+ * CR2 CLKEN LL_USART_ConfigSyncMode\n
+ * CR3 SCEN LL_USART_ConfigSyncMode\n
+ * CR3 IREN LL_USART_ConfigSyncMode\n
+ * CR3 HDSEL LL_USART_ConfigSyncMode
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_ConfigSyncMode(USART_TypeDef *USARTx)
+{
+ /* In Synchronous mode, the following bits must be kept cleared:
+ - LINEN (if LIN feature is supported) bit in the USART_CR2 register,
+ - SCEN (if Smartcard feature is supported), IREN (if Irda feature is supported) and HDSEL bits in the USART_CR3 register.
+ */
+#if defined(USART_LIN_SUPPORT)
+ CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN));
+#endif /* USART_LIN_SUPPORT */
+#if defined(USART_SMARTCARD_SUPPORT)
+#if defined(USART_IRDA_SUPPORT)
+ CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_IREN | USART_CR3_HDSEL));
+#else
+ CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL));
+#endif /* USART_IRDA_SUPPORT */
+#else
+#if defined(USART_IRDA_SUPPORT)
+ CLEAR_BIT(USARTx->CR3, (USART_CR3_IREN | USART_CR3_HDSEL));
+#else
+ CLEAR_BIT(USARTx->CR3, USART_CR3_HDSEL);
+#endif /* USART_IRDA_SUPPORT */
+#endif /* USART_SMARTCARD_SUPPORT */
+ /* set the UART/USART in Synchronous mode */
+ SET_BIT(USARTx->CR2, USART_CR2_CLKEN);
+}
+
+#if defined(USART_LIN_SUPPORT)
+/**
+ * @brief Perform basic configuration of USART for enabling use in LIN Mode
+ * @note In LIN mode, the following bits must be kept cleared:
+ * - STOP and CLKEN bits in the USART_CR2 register,
+ * - SCEN bit in the USART_CR3 register (if Smartcard feature is supported),
+ * - IREN bit in the USART_CR3 register (if Irda feature is supported),
+ * - HDSEL bit in the USART_CR3 register.
+ * This function also set the UART/USART in LIN mode.
+ * @note Macro @ref IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not
+ * LIN feature is supported by the USARTx instance.
+ * @note Call of this function is equivalent to following function call sequence :
+ * - Clear CLKEN in CR2 using @ref LL_USART_DisableSCLKOutput() function
+ * - Clear STOP in CR2 using @ref LL_USART_SetStopBitsLength() function
+ * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function (if Smartcard feature is supported)
+ * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function (if Irda feature is supported)
+ * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function
+ * - Set LINEN in CR2 using @ref LL_USART_EnableLIN() function
+ * @note Other remaining configurations items related to LIN Mode
+ * (as Baud Rate, Word length, LIN Break Detection Length, ...) should be set using
+ * dedicated functions
+ * @rmtoll CR2 CLKEN LL_USART_ConfigLINMode\n
+ * CR2 STOP LL_USART_ConfigLINMode\n
+ * CR2 LINEN LL_USART_ConfigLINMode\n
+ * CR3 IREN LL_USART_ConfigLINMode\n
+ * CR3 SCEN LL_USART_ConfigLINMode\n
+ * CR3 HDSEL LL_USART_ConfigLINMode
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_ConfigLINMode(USART_TypeDef *USARTx)
+{
+ /* In LIN mode, the following bits must be kept cleared:
+ - STOP and CLKEN bits in the USART_CR2 register,
+ - IREN (if Irda feature is supported) , SCEN (if Smartcard feature is supported)and HDSEL bits in the USART_CR3 register.
+ */
+ CLEAR_BIT(USARTx->CR2, (USART_CR2_CLKEN | USART_CR2_STOP));
+#if defined(USART_SMARTCARD_SUPPORT)
+#if defined(USART_IRDA_SUPPORT)
+ CLEAR_BIT(USARTx->CR3, (USART_CR3_IREN | USART_CR3_SCEN | USART_CR3_HDSEL));
+#else
+ CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL));
+#endif /* USART_IRDA_SUPPORT */
+#else
+#if defined(USART_IRDA_SUPPORT)
+ CLEAR_BIT(USARTx->CR3, (USART_CR3_IREN | USART_CR3_HDSEL));
+#else
+ CLEAR_BIT(USARTx->CR3, USART_CR3_HDSEL);
+#endif /* USART_IRDA_SUPPORT */
+#endif /* USART_SMARTCARD_SUPPORT */
+ /* Set the UART/USART in LIN mode */
+ SET_BIT(USARTx->CR2, USART_CR2_LINEN);
+}
+#endif /* USART_LIN_SUPPORT */
+
+/**
+ * @brief Perform basic configuration of USART for enabling use in Half Duplex Mode
+ * @note In Half Duplex mode, the following bits must be kept cleared:
+ * - LINEN bit in the USART_CR2 register (if LIN feature is supported),
+ * - CLKEN bit in the USART_CR2 register,
+ * - SCEN bit in the USART_CR3 register (if Smartcard feature is supported),
+ * - IREN bit in the USART_CR3 register (if Irda feature is supported),
+ * This function also sets the UART/USART in Half Duplex mode.
+ * @note Macro @ref IS_UART_HALFDUPLEX_INSTANCE(USARTx) can be used to check whether or not
+ * Half-Duplex mode is supported by the USARTx instance.
+ * @note Call of this function is equivalent to following function call sequence :
+ * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function (if LIN feature is supported)
+ * - Clear CLKEN in CR2 using @ref LL_USART_DisableSCLKOutput() function
+ * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function (if Smartcard feature is supported)
+ * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function (if Irda feature is supported)
+ * - Set HDSEL in CR3 using @ref LL_USART_EnableHalfDuplex() function
+ * @note Other remaining configurations items related to Half Duplex Mode
+ * (as Baud Rate, Word length, Parity, ...) should be set using
+ * dedicated functions
+ * @rmtoll CR2 LINEN LL_USART_ConfigHalfDuplexMode\n
+ * CR2 CLKEN LL_USART_ConfigHalfDuplexMode\n
+ * CR3 HDSEL LL_USART_ConfigHalfDuplexMode\n
+ * CR3 SCEN LL_USART_ConfigHalfDuplexMode\n
+ * CR3 IREN LL_USART_ConfigHalfDuplexMode
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_ConfigHalfDuplexMode(USART_TypeDef *USARTx)
+{
+ /* In Half Duplex mode, the following bits must be kept cleared:
+ - LINEN (if LIN feature is supported) and CLKEN bits in the USART_CR2 register,
+ - SCEN (if Smartcard feature is supported) and IREN (if Irda feature is supported) bits in the USART_CR3 register.
+ */
+#if defined(USART_LIN_SUPPORT)
+ CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN));
+#else
+ CLEAR_BIT(USARTx->CR2, USART_CR2_CLKEN);
+#endif /* USART_LIN_SUPPORT */
+#if defined(USART_SMARTCARD_SUPPORT)
+#if defined(USART_IRDA_SUPPORT)
+ CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_IREN));
+#else
+ CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN));
+#endif /* USART_IRDA_SUPPORT */
+#else
+#if defined(USART_IRDA_SUPPORT)
+ CLEAR_BIT(USARTx->CR3, (USART_CR3_IREN));
+#endif /* USART_IRDA_SUPPORT */
+#endif /* USART_SMARTCARD_SUPPORT */
+ /* set the UART/USART in Half Duplex mode */
+ SET_BIT(USARTx->CR3, USART_CR3_HDSEL);
+}
+
+#if defined(USART_SMARTCARD_SUPPORT)
+/**
+ * @brief Perform basic configuration of USART for enabling use in Smartcard Mode
+ * @note In Smartcard mode, the following bits must be kept cleared:
+ * - LINEN bit in the USART_CR2 register (if LIN feature is supported),
+ * - IREN bit in the USART_CR3 register (if Irda feature is supported),
+ * - HDSEL bit in the USART_CR3 register.
+ * This function also configures Stop bits to 1.5 bits and
+ * sets the USART in Smartcard mode (SCEN bit).
+ * Clock Output is also enabled (CLKEN).
+ * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not
+ * Smartcard feature is supported by the USARTx instance.
+ * @note Call of this function is equivalent to following function call sequence :
+ * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function (if LIN feature is supported)
+ * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function (if Irda feature is supported)
+ * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function
+ * - Configure STOP in CR2 using @ref LL_USART_SetStopBitsLength() function
+ * - Set CLKEN in CR2 using @ref LL_USART_EnableSCLKOutput() function
+ * - Set SCEN in CR3 using @ref LL_USART_EnableSmartcard() function
+ * @note Other remaining configurations items related to Smartcard Mode
+ * (as Baud Rate, Word length, Parity, ...) should be set using
+ * dedicated functions
+ * @rmtoll CR2 LINEN LL_USART_ConfigSmartcardMode\n
+ * CR2 STOP LL_USART_ConfigSmartcardMode\n
+ * CR2 CLKEN LL_USART_ConfigSmartcardMode\n
+ * CR3 HDSEL LL_USART_ConfigSmartcardMode\n
+ * CR3 SCEN LL_USART_ConfigSmartcardMode
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_ConfigSmartcardMode(USART_TypeDef *USARTx)
+{
+ /* In Smartcard mode, the following bits must be kept cleared:
+ - LINEN (if LIN feature is supported) bit in the USART_CR2 register,
+ - IREN (if Irda feature is supported) and HDSEL bits in the USART_CR3 register.
+ */
+#if defined(USART_LIN_SUPPORT)
+ CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN));
+#endif /* USART_LIN_SUPPORT */
+#if defined(USART_IRDA_SUPPORT)
+ CLEAR_BIT(USARTx->CR3, (USART_CR3_IREN | USART_CR3_HDSEL));
+#else
+ CLEAR_BIT(USARTx->CR3, (USART_CR3_HDSEL));
+#endif /* USART_IRDA_SUPPORT */
+ /* Configure Stop bits to 1.5 bits */
+ /* Synchronous mode is activated by default */
+ SET_BIT(USARTx->CR2, (USART_CR2_STOP_0 | USART_CR2_STOP_1 | USART_CR2_CLKEN));
+ /* set the UART/USART in Smartcard mode */
+ SET_BIT(USARTx->CR3, USART_CR3_SCEN);
+}
+#endif /* USART_SMARTCARD_SUPPORT */
+
+#if defined(USART_IRDA_SUPPORT)
+/**
+ * @brief Perform basic configuration of USART for enabling use in Irda Mode
+ * @note In IRDA mode, the following bits must be kept cleared:
+ * - LINEN bit in the USART_CR2 register (if LIN feature is supported),
+ * - STOP and CLKEN bits in the USART_CR2 register,
+ * - SCEN bit in the USART_CR3 register (if Smartcard feature is supported),
+ * - HDSEL bit in the USART_CR3 register.
+ * This function also sets the UART/USART in IRDA mode (IREN bit).
+ * @note Macro @ref IS_IRDA_INSTANCE(USARTx) can be used to check whether or not
+ * IrDA feature is supported by the USARTx instance.
+ * @note Call of this function is equivalent to following function call sequence :
+ * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function (if LIN feature is supported)
+ * - Clear CLKEN in CR2 using @ref LL_USART_DisableSCLKOutput() function
+ * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function (if Smartcard feature is supported)
+ * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function
+ * - Configure STOP in CR2 using @ref LL_USART_SetStopBitsLength() function
+ * - Set IREN in CR3 using @ref LL_USART_EnableIrda() function
+ * @note Other remaining configurations items related to Irda Mode
+ * (as Baud Rate, Word length, Power mode, ...) should be set using
+ * dedicated functions
+ * @rmtoll CR2 LINEN LL_USART_ConfigIrdaMode\n
+ * CR2 CLKEN LL_USART_ConfigIrdaMode\n
+ * CR2 STOP LL_USART_ConfigIrdaMode\n
+ * CR3 SCEN LL_USART_ConfigIrdaMode\n
+ * CR3 HDSEL LL_USART_ConfigIrdaMode\n
+ * CR3 IREN LL_USART_ConfigIrdaMode
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_ConfigIrdaMode(USART_TypeDef *USARTx)
+{
+ /* In IRDA mode, the following bits must be kept cleared:
+ - LINEN (if LIN feature is supported), STOP and CLKEN bits in the USART_CR2 register,
+ - SCEN (if Smartcard feature is supported) and HDSEL bits in the USART_CR3 register.
+ */
+#if defined(USART_LIN_SUPPORT)
+ CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN | USART_CR2_STOP));
+#else
+ CLEAR_BIT(USARTx->CR2, (USART_CR2_CLKEN | USART_CR2_STOP));
+#endif /* USART_LIN_SUPPORT */
+#if defined(USART_SMARTCARD_SUPPORT)
+ CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL));
+#else
+ CLEAR_BIT(USARTx->CR3, (USART_CR3_HDSEL));
+#endif /* USART_SMARTCARD_SUPPORT */
+ /* set the UART/USART in IRDA mode */
+ SET_BIT(USARTx->CR3, USART_CR3_IREN);
+}
+#endif /* USART_IRDA_SUPPORT */
+
+/**
+ * @brief Perform basic configuration of USART for enabling use in Multi processor Mode
+ * (several USARTs connected in a network, one of the USARTs can be the master,
+ * its TX output connected to the RX inputs of the other slaves USARTs).
+ * @note In MultiProcessor mode, the following bits must be kept cleared:
+ * - LINEN bit in the USART_CR2 register (if LIN feature is supported),
+ * - CLKEN bit in the USART_CR2 register,
+ * - SCEN bit in the USART_CR3 register (if Smartcard feature is supported),
+ * - IREN bit in the USART_CR3 register (if Irda feature is supported),
+ * - HDSEL bit in the USART_CR3 register.
+ * @note Call of this function is equivalent to following function call sequence :
+ * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function (if LIN feature is supported)
+ * - Clear CLKEN in CR2 using @ref LL_USART_DisableSCLKOutput() function
+ * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function (if Smartcard feature is supported)
+ * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function (if Irda feature is supported)
+ * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function
+ * @note Other remaining configurations items related to Multi processor Mode
+ * (as Baud Rate, Wake Up Method, Node address, ...) should be set using
+ * dedicated functions
+ * @rmtoll CR2 LINEN LL_USART_ConfigMultiProcessMode\n
+ * CR2 CLKEN LL_USART_ConfigMultiProcessMode\n
+ * CR3 SCEN LL_USART_ConfigMultiProcessMode\n
+ * CR3 HDSEL LL_USART_ConfigMultiProcessMode\n
+ * CR3 IREN LL_USART_ConfigMultiProcessMode
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_ConfigMultiProcessMode(USART_TypeDef *USARTx)
+{
+ /* In Multi Processor mode, the following bits must be kept cleared:
+ - LINEN (if LIN feature is supported) and CLKEN bits in the USART_CR2 register,
+ - IREN (if Irda feature is supported), SCEN (if Smartcard feature is supported) and HDSEL bits in the USART_CR3 register.
+ */
+#if defined(USART_LIN_SUPPORT)
+ CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN));
+#else
+ CLEAR_BIT(USARTx->CR2, USART_CR2_CLKEN);
+#endif /* USART_LIN_SUPPORT */
+#if defined(USART_SMARTCARD_SUPPORT)
+#if defined(USART_IRDA_SUPPORT)
+ CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN));
+#else
+ CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL));
+#endif /* USART_IRDA_SUPPORT */
+#else
+#if defined(USART_IRDA_SUPPORT)
+ CLEAR_BIT(USARTx->CR3, (USART_CR3_HDSEL | USART_CR3_IREN));
+#else
+ CLEAR_BIT(USARTx->CR3, (USART_CR3_HDSEL));
+#endif /* USART_IRDA_SUPPORT */
+#endif /* USART_SMARTCARD_SUPPORT*/
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EF_FLAG_Management FLAG_Management
+ * @{
+ */
+
+/**
+ * @brief Check if the USART Parity Error Flag is set or not
+ * @rmtoll ISR PE LL_USART_IsActiveFlag_PE
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_PE(USART_TypeDef *USARTx)
+{
+ return ((READ_BIT(USARTx->ISR, USART_ISR_PE) == (USART_ISR_PE)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Check if the USART Framing Error Flag is set or not
+ * @rmtoll ISR FE LL_USART_IsActiveFlag_FE
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_FE(USART_TypeDef *USARTx)
+{
+ return ((READ_BIT(USARTx->ISR, USART_ISR_FE) == (USART_ISR_FE)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Check if the USART Noise error detected Flag is set or not
+ * @rmtoll ISR NE LL_USART_IsActiveFlag_NE
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_NE(USART_TypeDef *USARTx)
+{
+ return ((READ_BIT(USARTx->ISR, USART_ISR_NE) == (USART_ISR_NE)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Check if the USART OverRun Error Flag is set or not
+ * @rmtoll ISR ORE LL_USART_IsActiveFlag_ORE
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_ORE(USART_TypeDef *USARTx)
+{
+ return ((READ_BIT(USARTx->ISR, USART_ISR_ORE) == (USART_ISR_ORE)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Check if the USART IDLE line detected Flag is set or not
+ * @rmtoll ISR IDLE LL_USART_IsActiveFlag_IDLE
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_IDLE(USART_TypeDef *USARTx)
+{
+ return ((READ_BIT(USARTx->ISR, USART_ISR_IDLE) == (USART_ISR_IDLE)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Check if the USART Read Data Register Not Empty Flag is set or not
+ * @rmtoll ISR RXNE LL_USART_IsActiveFlag_RXNE
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_RXNE(USART_TypeDef *USARTx)
+{
+ return ((READ_BIT(USARTx->ISR, USART_ISR_RXNE) == (USART_ISR_RXNE)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Check if the USART Transmission Complete Flag is set or not
+ * @rmtoll ISR TC LL_USART_IsActiveFlag_TC
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_TC(USART_TypeDef *USARTx)
+{
+ return ((READ_BIT(USARTx->ISR, USART_ISR_TC) == (USART_ISR_TC)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Check if the USART Transmit Data Register Empty Flag is set or not
+ * @rmtoll ISR TXE LL_USART_IsActiveFlag_TXE
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_TXE(USART_TypeDef *USARTx)
+{
+ return ((READ_BIT(USARTx->ISR, USART_ISR_TXE) == (USART_ISR_TXE)) ? 1UL : 0UL);
+}
+
+#if defined(USART_LIN_SUPPORT)
+/**
+ * @brief Check if the USART LIN Break Detection Flag is set or not
+ * @note Macro @ref IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not
+ * LIN feature is supported by the USARTx instance.
+ * @rmtoll ISR LBDF LL_USART_IsActiveFlag_LBD
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_LBD(USART_TypeDef *USARTx)
+{
+ return ((READ_BIT(USARTx->ISR, USART_ISR_LBDF) == (USART_ISR_LBDF)) ? 1UL : 0UL);
+}
+#endif /* USART_LIN_SUPPORT */
+
+/**
+ * @brief Check if the USART CTS interrupt Flag is set or not
+ * @note Macro @ref IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not
+ * Hardware Flow control feature is supported by the USARTx instance.
+ * @rmtoll ISR CTSIF LL_USART_IsActiveFlag_nCTS
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_nCTS(USART_TypeDef *USARTx)
+{
+ return ((READ_BIT(USARTx->ISR, USART_ISR_CTSIF) == (USART_ISR_CTSIF)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Check if the USART CTS Flag is set or not
+ * @note Macro @ref IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not
+ * Hardware Flow control feature is supported by the USARTx instance.
+ * @rmtoll ISR CTS LL_USART_IsActiveFlag_CTS
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_CTS(USART_TypeDef *USARTx)
+{
+ return ((READ_BIT(USARTx->ISR, USART_ISR_CTS) == (USART_ISR_CTS)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Check if the USART Receiver Time Out Flag is set or not
+ * @rmtoll ISR RTOF LL_USART_IsActiveFlag_RTO
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_RTO(USART_TypeDef *USARTx)
+{
+ return ((READ_BIT(USARTx->ISR, USART_ISR_RTOF) == (USART_ISR_RTOF)) ? 1UL : 0UL);
+}
+
+#if defined(USART_SMARTCARD_SUPPORT)
+/**
+ * @brief Check if the USART End Of Block Flag is set or not
+ * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not
+ * Smartcard feature is supported by the USARTx instance.
+ * @rmtoll ISR EOBF LL_USART_IsActiveFlag_EOB
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_EOB(USART_TypeDef *USARTx)
+{
+ return ((READ_BIT(USARTx->ISR, USART_ISR_EOBF) == (USART_ISR_EOBF)) ? 1UL : 0UL);
+}
+#endif /* USART_SMARTCARD_SUPPORT */
+
+/**
+ * @brief Check if the USART Auto-Baud Rate Error Flag is set or not
+ * @note Macro @ref IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not
+ * Auto Baud Rate detection feature is supported by the USARTx instance.
+ * @rmtoll ISR ABRE LL_USART_IsActiveFlag_ABRE
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_ABRE(USART_TypeDef *USARTx)
+{
+ return ((READ_BIT(USARTx->ISR, USART_ISR_ABRE) == (USART_ISR_ABRE)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Check if the USART Auto-Baud Rate Flag is set or not
+ * @note Macro @ref IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not
+ * Auto Baud Rate detection feature is supported by the USARTx instance.
+ * @rmtoll ISR ABRF LL_USART_IsActiveFlag_ABR
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_ABR(USART_TypeDef *USARTx)
+{
+ return ((READ_BIT(USARTx->ISR, USART_ISR_ABRF) == (USART_ISR_ABRF)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Check if the USART Busy Flag is set or not
+ * @rmtoll ISR BUSY LL_USART_IsActiveFlag_BUSY
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_BUSY(USART_TypeDef *USARTx)
+{
+ return ((READ_BIT(USARTx->ISR, USART_ISR_BUSY) == (USART_ISR_BUSY)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Check if the USART Character Match Flag is set or not
+ * @rmtoll ISR CMF LL_USART_IsActiveFlag_CM
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_CM(USART_TypeDef *USARTx)
+{
+ return ((READ_BIT(USARTx->ISR, USART_ISR_CMF) == (USART_ISR_CMF)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Check if the USART Send Break Flag is set or not
+ * @rmtoll ISR SBKF LL_USART_IsActiveFlag_SBK
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_SBK(USART_TypeDef *USARTx)
+{
+ return ((READ_BIT(USARTx->ISR, USART_ISR_SBKF) == (USART_ISR_SBKF)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Check if the USART Receive Wake Up from mute mode Flag is set or not
+ * @rmtoll ISR RWU LL_USART_IsActiveFlag_RWU
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_RWU(USART_TypeDef *USARTx)
+{
+ return ((READ_BIT(USARTx->ISR, USART_ISR_RWU) == (USART_ISR_RWU)) ? 1UL : 0UL);
+}
+
+#if defined(USART_CR1_UESM)
+/**
+ * @brief Check if the USART Wake Up from stop mode Flag is set or not
+ * @note Macro @ref IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not
+ * Wake-up from Stop mode feature is supported by the USARTx instance.
+ * @rmtoll ISR WUF LL_USART_IsActiveFlag_WKUP
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_WKUP(USART_TypeDef *USARTx)
+{
+ return ((READ_BIT(USARTx->ISR, USART_ISR_WUF) == (USART_ISR_WUF)) ? 1UL : 0UL);
+}
+
+#endif /* USART_CR1_UESM */
+/**
+ * @brief Check if the USART Transmit Enable Acknowledge Flag is set or not
+ * @rmtoll ISR TEACK LL_USART_IsActiveFlag_TEACK
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_TEACK(USART_TypeDef *USARTx)
+{
+ return ((READ_BIT(USARTx->ISR, USART_ISR_TEACK) == (USART_ISR_TEACK)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Check if the USART Receive Enable Acknowledge Flag is set or not
+ * @rmtoll ISR REACK LL_USART_IsActiveFlag_REACK
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_REACK(USART_TypeDef *USARTx)
+{
+ return ((READ_BIT(USARTx->ISR, USART_ISR_REACK) == (USART_ISR_REACK)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Clear Parity Error Flag
+ * @rmtoll ICR PECF LL_USART_ClearFlag_PE
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_ClearFlag_PE(USART_TypeDef *USARTx)
+{
+ WRITE_REG(USARTx->ICR, USART_ICR_PECF);
+}
+
+/**
+ * @brief Clear Framing Error Flag
+ * @rmtoll ICR FECF LL_USART_ClearFlag_FE
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_ClearFlag_FE(USART_TypeDef *USARTx)
+{
+ WRITE_REG(USARTx->ICR, USART_ICR_FECF);
+}
+
+/**
+ * @brief Clear Noise Error detected Flag
+ * @rmtoll ICR NCF LL_USART_ClearFlag_NE
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_ClearFlag_NE(USART_TypeDef *USARTx)
+{
+ WRITE_REG(USARTx->ICR, USART_ICR_NCF);
+}
+
+/**
+ * @brief Clear OverRun Error Flag
+ * @rmtoll ICR ORECF LL_USART_ClearFlag_ORE
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_ClearFlag_ORE(USART_TypeDef *USARTx)
+{
+ WRITE_REG(USARTx->ICR, USART_ICR_ORECF);
+}
+
+/**
+ * @brief Clear IDLE line detected Flag
+ * @rmtoll ICR IDLECF LL_USART_ClearFlag_IDLE
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_ClearFlag_IDLE(USART_TypeDef *USARTx)
+{
+ WRITE_REG(USARTx->ICR, USART_ICR_IDLECF);
+}
+
+/**
+ * @brief Clear Transmission Complete Flag
+ * @rmtoll ICR TCCF LL_USART_ClearFlag_TC
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_ClearFlag_TC(USART_TypeDef *USARTx)
+{
+ WRITE_REG(USARTx->ICR, USART_ICR_TCCF);
+}
+
+
+#if defined(USART_LIN_SUPPORT)
+/**
+ * @brief Clear LIN Break Detection Flag
+ * @note Macro @ref IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not
+ * LIN feature is supported by the USARTx instance.
+ * @rmtoll ICR LBDCF LL_USART_ClearFlag_LBD
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_ClearFlag_LBD(USART_TypeDef *USARTx)
+{
+ WRITE_REG(USARTx->ICR, USART_ICR_LBDCF);
+}
+#endif /* USART_LIN_SUPPORT */
+
+/**
+ * @brief Clear CTS Interrupt Flag
+ * @note Macro @ref IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not
+ * Hardware Flow control feature is supported by the USARTx instance.
+ * @rmtoll ICR CTSCF LL_USART_ClearFlag_nCTS
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_ClearFlag_nCTS(USART_TypeDef *USARTx)
+{
+ WRITE_REG(USARTx->ICR, USART_ICR_CTSCF);
+}
+
+/**
+ * @brief Clear Receiver Time Out Flag
+ * @rmtoll ICR RTOCF LL_USART_ClearFlag_RTO
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_ClearFlag_RTO(USART_TypeDef *USARTx)
+{
+ WRITE_REG(USARTx->ICR, USART_ICR_RTOCF);
+}
+
+#if defined(USART_SMARTCARD_SUPPORT)
+/**
+ * @brief Clear End Of Block Flag
+ * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not
+ * Smartcard feature is supported by the USARTx instance.
+ * @rmtoll ICR EOBCF LL_USART_ClearFlag_EOB
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_ClearFlag_EOB(USART_TypeDef *USARTx)
+{
+ WRITE_REG(USARTx->ICR, USART_ICR_EOBCF);
+}
+#endif /* USART_SMARTCARD_SUPPORT */
+
+/**
+ * @brief Clear Character Match Flag
+ * @rmtoll ICR CMCF LL_USART_ClearFlag_CM
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_ClearFlag_CM(USART_TypeDef *USARTx)
+{
+ WRITE_REG(USARTx->ICR, USART_ICR_CMCF);
+}
+
+#if defined(USART_CR1_UESM)
+/**
+ * @brief Clear Wake Up from stop mode Flag
+ * @note Macro @ref IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not
+ * Wake-up from Stop mode feature is supported by the USARTx instance.
+ * @rmtoll ICR WUCF LL_USART_ClearFlag_WKUP
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_ClearFlag_WKUP(USART_TypeDef *USARTx)
+{
+ WRITE_REG(USARTx->ICR, USART_ICR_WUCF);
+}
+
+#endif /* USART_CR1_UESM */
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EF_IT_Management IT_Management
+ * @{
+ */
+
+/**
+ * @brief Enable IDLE Interrupt
+ * @rmtoll CR1 IDLEIE LL_USART_EnableIT_IDLE
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableIT_IDLE(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR1, USART_CR1_IDLEIE);
+}
+
+/**
+ * @brief Enable RX Not Empty Interrupt
+ * @rmtoll CR1 RXNEIE LL_USART_EnableIT_RXNE
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableIT_RXNE(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR1, USART_CR1_RXNEIE);
+}
+
+/**
+ * @brief Enable Transmission Complete Interrupt
+ * @rmtoll CR1 TCIE LL_USART_EnableIT_TC
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableIT_TC(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR1, USART_CR1_TCIE);
+}
+
+/**
+ * @brief Enable TX Empty Interrupt
+ * @rmtoll CR1 TXEIE LL_USART_EnableIT_TXE
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableIT_TXE(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR1, USART_CR1_TXEIE);
+}
+
+/**
+ * @brief Enable Parity Error Interrupt
+ * @rmtoll CR1 PEIE LL_USART_EnableIT_PE
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableIT_PE(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR1, USART_CR1_PEIE);
+}
+
+/**
+ * @brief Enable Character Match Interrupt
+ * @rmtoll CR1 CMIE LL_USART_EnableIT_CM
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableIT_CM(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR1, USART_CR1_CMIE);
+}
+
+/**
+ * @brief Enable Receiver Timeout Interrupt
+ * @rmtoll CR1 RTOIE LL_USART_EnableIT_RTO
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableIT_RTO(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR1, USART_CR1_RTOIE);
+}
+
+#if defined(USART_SMARTCARD_SUPPORT)
+/**
+ * @brief Enable End Of Block Interrupt
+ * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not
+ * Smartcard feature is supported by the USARTx instance.
+ * @rmtoll CR1 EOBIE LL_USART_EnableIT_EOB
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableIT_EOB(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR1, USART_CR1_EOBIE);
+}
+#endif /* USART_SMARTCARD_SUPPORT */
+
+#if defined(USART_LIN_SUPPORT)
+/**
+ * @brief Enable LIN Break Detection Interrupt
+ * @note Macro @ref IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not
+ * LIN feature is supported by the USARTx instance.
+ * @rmtoll CR2 LBDIE LL_USART_EnableIT_LBD
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableIT_LBD(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR2, USART_CR2_LBDIE);
+}
+
+#endif/* USART_LIN_SUPPORT */
+/**
+ * @brief Enable Error Interrupt
+ * @note When set, Error Interrupt Enable Bit is enabling interrupt generation in case of a framing
+ * error, overrun error or noise flag (FE=1 or ORE=1 or NF=1 in the USARTx_ISR register).
+ * 0: Interrupt is inhibited
+ * 1: An interrupt is generated when FE=1 or ORE=1 or NF=1 in the USARTx_ISR register.
+ * @rmtoll CR3 EIE LL_USART_EnableIT_ERROR
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableIT_ERROR(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR3, USART_CR3_EIE);
+}
+
+/**
+ * @brief Enable CTS Interrupt
+ * @note Macro @ref IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not
+ * Hardware Flow control feature is supported by the USARTx instance.
+ * @rmtoll CR3 CTSIE LL_USART_EnableIT_CTS
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableIT_CTS(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR3, USART_CR3_CTSIE);
+}
+
+#if defined(USART_CR1_UESM)
+/**
+ * @brief Enable Wake Up from Stop Mode Interrupt
+ * @note Macro @ref IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not
+ * Wake-up from Stop mode feature is supported by the USARTx instance.
+ * @rmtoll CR3 WUFIE LL_USART_EnableIT_WKUP
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableIT_WKUP(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR3, USART_CR3_WUFIE);
+}
+
+#endif /* USART_CR1_UESM */
+
+/**
+ * @brief Disable IDLE Interrupt
+ * @rmtoll CR1 IDLEIE LL_USART_DisableIT_IDLE
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableIT_IDLE(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR1, USART_CR1_IDLEIE);
+}
+
+/**
+ * @brief Disable RX Not Empty Interrupt
+ * @rmtoll CR1 RXNEIE LL_USART_DisableIT_RXNE
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableIT_RXNE(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR1, USART_CR1_RXNEIE);
+}
+
+/**
+ * @brief Disable Transmission Complete Interrupt
+ * @rmtoll CR1 TCIE LL_USART_DisableIT_TC
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableIT_TC(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR1, USART_CR1_TCIE);
+}
+
+/**
+ * @brief Disable TX Empty Interrupt
+ * @rmtoll CR1 TXEIE LL_USART_DisableIT_TXE
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableIT_TXE(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR1, USART_CR1_TXEIE);
+}
+
+/**
+ * @brief Disable Parity Error Interrupt
+ * @rmtoll CR1 PEIE LL_USART_DisableIT_PE
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableIT_PE(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR1, USART_CR1_PEIE);
+}
+
+/**
+ * @brief Disable Character Match Interrupt
+ * @rmtoll CR1 CMIE LL_USART_DisableIT_CM
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableIT_CM(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR1, USART_CR1_CMIE);
+}
+
+/**
+ * @brief Disable Receiver Timeout Interrupt
+ * @rmtoll CR1 RTOIE LL_USART_DisableIT_RTO
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableIT_RTO(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR1, USART_CR1_RTOIE);
+}
+
+#if defined(USART_SMARTCARD_SUPPORT)
+/**
+ * @brief Disable End Of Block Interrupt
+ * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not
+ * Smartcard feature is supported by the USARTx instance.
+ * @rmtoll CR1 EOBIE LL_USART_DisableIT_EOB
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableIT_EOB(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR1, USART_CR1_EOBIE);
+}
+#endif /* USART_SMARTCARD_SUPPORT */
+
+#if defined(USART_LIN_SUPPORT)
+/**
+ * @brief Disable LIN Break Detection Interrupt
+ * @note Macro @ref IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not
+ * LIN feature is supported by the USARTx instance.
+ * @rmtoll CR2 LBDIE LL_USART_DisableIT_LBD
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableIT_LBD(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR2, USART_CR2_LBDIE);
+}
+#endif /* USART_LIN_SUPPORT */
+
+/**
+ * @brief Disable Error Interrupt
+ * @note When set, Error Interrupt Enable Bit is enabling interrupt generation in case of a framing
+ * error, overrun error or noise flag (FE=1 or ORE=1 or NF=1 in the USARTx_ISR register).
+ * 0: Interrupt is inhibited
+ * 1: An interrupt is generated when FE=1 or ORE=1 or NF=1 in the USARTx_ISR register.
+ * @rmtoll CR3 EIE LL_USART_DisableIT_ERROR
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableIT_ERROR(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR3, USART_CR3_EIE);
+}
+
+/**
+ * @brief Disable CTS Interrupt
+ * @note Macro @ref IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not
+ * Hardware Flow control feature is supported by the USARTx instance.
+ * @rmtoll CR3 CTSIE LL_USART_DisableIT_CTS
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableIT_CTS(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR3, USART_CR3_CTSIE);
+}
+
+#if defined(USART_CR1_UESM)
+/**
+ * @brief Disable Wake Up from Stop Mode Interrupt
+ * @note Macro @ref IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not
+ * Wake-up from Stop mode feature is supported by the USARTx instance.
+ * @rmtoll CR3 WUFIE LL_USART_DisableIT_WKUP
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableIT_WKUP(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR3, USART_CR3_WUFIE);
+}
+
+#endif /* USART_CR1_UESM */
+
+/**
+ * @brief Check if the USART IDLE Interrupt source is enabled or disabled.
+ * @rmtoll CR1 IDLEIE LL_USART_IsEnabledIT_IDLE
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_IDLE(USART_TypeDef *USARTx)
+{
+ return ((READ_BIT(USARTx->CR1, USART_CR1_IDLEIE) == (USART_CR1_IDLEIE)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Check if the USART RX Not Empty Interrupt is enabled or disabled.
+ * @rmtoll CR1 RXNEIE LL_USART_IsEnabledIT_RXNE
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_RXNE(USART_TypeDef *USARTx)
+{
+ return ((READ_BIT(USARTx->CR1, USART_CR1_RXNEIE) == (USART_CR1_RXNEIE)) ? 1U : 0U);
+}
+
+/**
+ * @brief Check if the USART Transmission Complete Interrupt is enabled or disabled.
+ * @rmtoll CR1 TCIE LL_USART_IsEnabledIT_TC
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_TC(USART_TypeDef *USARTx)
+{
+ return ((READ_BIT(USARTx->CR1, USART_CR1_TCIE) == (USART_CR1_TCIE)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Check if the USART TX Empty Interrupt is enabled or disabled.
+ * @rmtoll CR1 TXEIE LL_USART_IsEnabledIT_TXE
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_TXE(USART_TypeDef *USARTx)
+{
+ return ((READ_BIT(USARTx->CR1, USART_CR1_TXEIE) == (USART_CR1_TXEIE)) ? 1U : 0U);
+}
+
+/**
+ * @brief Check if the USART Parity Error Interrupt is enabled or disabled.
+ * @rmtoll CR1 PEIE LL_USART_IsEnabledIT_PE
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_PE(USART_TypeDef *USARTx)
+{
+ return ((READ_BIT(USARTx->CR1, USART_CR1_PEIE) == (USART_CR1_PEIE)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Check if the USART Character Match Interrupt is enabled or disabled.
+ * @rmtoll CR1 CMIE LL_USART_IsEnabledIT_CM
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_CM(USART_TypeDef *USARTx)
+{
+ return ((READ_BIT(USARTx->CR1, USART_CR1_CMIE) == (USART_CR1_CMIE)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Check if the USART Receiver Timeout Interrupt is enabled or disabled.
+ * @rmtoll CR1 RTOIE LL_USART_IsEnabledIT_RTO
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_RTO(USART_TypeDef *USARTx)
+{
+ return ((READ_BIT(USARTx->CR1, USART_CR1_RTOIE) == (USART_CR1_RTOIE)) ? 1UL : 0UL);
+}
+
+#if defined(USART_SMARTCARD_SUPPORT)
+/**
+ * @brief Check if the USART End Of Block Interrupt is enabled or disabled.
+ * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not
+ * Smartcard feature is supported by the USARTx instance.
+ * @rmtoll CR1 EOBIE LL_USART_IsEnabledIT_EOB
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_EOB(USART_TypeDef *USARTx)
+{
+ return ((READ_BIT(USARTx->CR1, USART_CR1_EOBIE) == (USART_CR1_EOBIE)) ? 1UL : 0UL);
+}
+
+#endif /* USART_SMARTCARD_SUPPORT */
+#if defined(USART_LIN_SUPPORT)
+/**
+ * @brief Check if the USART LIN Break Detection Interrupt is enabled or disabled.
+ * @note Macro @ref IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not
+ * LIN feature is supported by the USARTx instance.
+ * @rmtoll CR2 LBDIE LL_USART_IsEnabledIT_LBD
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_LBD(USART_TypeDef *USARTx)
+{
+ return ((READ_BIT(USARTx->CR2, USART_CR2_LBDIE) == (USART_CR2_LBDIE)) ? 1UL : 0UL);
+}
+#endif /* USART_LIN_SUPPORT */
+
+/**
+ * @brief Check if the USART Error Interrupt is enabled or disabled.
+ * @rmtoll CR3 EIE LL_USART_IsEnabledIT_ERROR
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_ERROR(USART_TypeDef *USARTx)
+{
+ return ((READ_BIT(USARTx->CR3, USART_CR3_EIE) == (USART_CR3_EIE)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Check if the USART CTS Interrupt is enabled or disabled.
+ * @note Macro @ref IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not
+ * Hardware Flow control feature is supported by the USARTx instance.
+ * @rmtoll CR3 CTSIE LL_USART_IsEnabledIT_CTS
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_CTS(USART_TypeDef *USARTx)
+{
+ return ((READ_BIT(USARTx->CR3, USART_CR3_CTSIE) == (USART_CR3_CTSIE)) ? 1UL : 0UL);
+}
+
+#if defined(USART_CR1_UESM)
+/**
+ * @brief Check if the USART Wake Up from Stop Mode Interrupt is enabled or disabled.
+ * @note Macro @ref IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not
+ * Wake-up from Stop mode feature is supported by the USARTx instance.
+ * @rmtoll CR3 WUFIE LL_USART_IsEnabledIT_WKUP
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_WKUP(USART_TypeDef *USARTx)
+{
+ return ((READ_BIT(USARTx->CR3, USART_CR3_WUFIE) == (USART_CR3_WUFIE)) ? 1UL : 0UL);
+}
+
+#endif /* USART_CR1_UESM */
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EF_DMA_Management DMA_Management
+ * @{
+ */
+
+/**
+ * @brief Enable DMA Mode for reception
+ * @rmtoll CR3 DMAR LL_USART_EnableDMAReq_RX
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableDMAReq_RX(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR3, USART_CR3_DMAR);
+}
+
+/**
+ * @brief Disable DMA Mode for reception
+ * @rmtoll CR3 DMAR LL_USART_DisableDMAReq_RX
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableDMAReq_RX(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR3, USART_CR3_DMAR);
+}
+
+/**
+ * @brief Check if DMA Mode is enabled for reception
+ * @rmtoll CR3 DMAR LL_USART_IsEnabledDMAReq_RX
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledDMAReq_RX(USART_TypeDef *USARTx)
+{
+ return ((READ_BIT(USARTx->CR3, USART_CR3_DMAR) == (USART_CR3_DMAR)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Enable DMA Mode for transmission
+ * @rmtoll CR3 DMAT LL_USART_EnableDMAReq_TX
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableDMAReq_TX(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR3, USART_CR3_DMAT);
+}
+
+/**
+ * @brief Disable DMA Mode for transmission
+ * @rmtoll CR3 DMAT LL_USART_DisableDMAReq_TX
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableDMAReq_TX(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR3, USART_CR3_DMAT);
+}
+
+/**
+ * @brief Check if DMA Mode is enabled for transmission
+ * @rmtoll CR3 DMAT LL_USART_IsEnabledDMAReq_TX
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledDMAReq_TX(USART_TypeDef *USARTx)
+{
+ return ((READ_BIT(USARTx->CR3, USART_CR3_DMAT) == (USART_CR3_DMAT)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Enable DMA Disabling on Reception Error
+ * @rmtoll CR3 DDRE LL_USART_EnableDMADeactOnRxErr
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_EnableDMADeactOnRxErr(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->CR3, USART_CR3_DDRE);
+}
+
+/**
+ * @brief Disable DMA Disabling on Reception Error
+ * @rmtoll CR3 DDRE LL_USART_DisableDMADeactOnRxErr
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_DisableDMADeactOnRxErr(USART_TypeDef *USARTx)
+{
+ CLEAR_BIT(USARTx->CR3, USART_CR3_DDRE);
+}
+
+/**
+ * @brief Indicate if DMA Disabling on Reception Error is disabled
+ * @rmtoll CR3 DDRE LL_USART_IsEnabledDMADeactOnRxErr
+ * @param USARTx USART Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_USART_IsEnabledDMADeactOnRxErr(USART_TypeDef *USARTx)
+{
+ return ((READ_BIT(USARTx->CR3, USART_CR3_DDRE) == (USART_CR3_DDRE)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Get the data register address used for DMA transfer
+ * @rmtoll RDR RDR LL_USART_DMA_GetRegAddr\n
+ * @rmtoll TDR TDR LL_USART_DMA_GetRegAddr
+ * @param USARTx USART Instance
+ * @param Direction This parameter can be one of the following values:
+ * @arg @ref LL_USART_DMA_REG_DATA_TRANSMIT
+ * @arg @ref LL_USART_DMA_REG_DATA_RECEIVE
+ * @retval Address of data register
+ */
+__STATIC_INLINE uint32_t LL_USART_DMA_GetRegAddr(USART_TypeDef *USARTx, uint32_t Direction)
+{
+ register uint32_t data_reg_addr;
+
+ if (Direction == LL_USART_DMA_REG_DATA_TRANSMIT)
+ {
+ /* return address of TDR register */
+ data_reg_addr = (uint32_t) &(USARTx->TDR);
+ }
+ else
+ {
+ /* return address of RDR register */
+ data_reg_addr = (uint32_t) &(USARTx->RDR);
+ }
+
+ return data_reg_addr;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EF_Data_Management Data_Management
+ * @{
+ */
+
+/**
+ * @brief Read Receiver Data register (Receive Data value, 8 bits)
+ * @rmtoll RDR RDR LL_USART_ReceiveData8
+ * @param USARTx USART Instance
+ * @retval Value between Min_Data=0x00 and Max_Data=0xFF
+ */
+__STATIC_INLINE uint8_t LL_USART_ReceiveData8(USART_TypeDef *USARTx)
+{
+ return (uint8_t)(READ_BIT(USARTx->RDR, USART_RDR_RDR) & 0xFFU);
+}
+
+/**
+ * @brief Read Receiver Data register (Receive Data value, 9 bits)
+ * @rmtoll RDR RDR LL_USART_ReceiveData9
+ * @param USARTx USART Instance
+ * @retval Value between Min_Data=0x00 and Max_Data=0x1FF
+ */
+__STATIC_INLINE uint16_t LL_USART_ReceiveData9(USART_TypeDef *USARTx)
+{
+ return (uint16_t)(READ_BIT(USARTx->RDR, USART_RDR_RDR));
+}
+
+/**
+ * @brief Write in Transmitter Data Register (Transmit Data value, 8 bits)
+ * @rmtoll TDR TDR LL_USART_TransmitData8
+ * @param USARTx USART Instance
+ * @param Value between Min_Data=0x00 and Max_Data=0xFF
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_TransmitData8(USART_TypeDef *USARTx, uint8_t Value)
+{
+ USARTx->TDR = Value;
+}
+
+/**
+ * @brief Write in Transmitter Data Register (Transmit Data value, 9 bits)
+ * @rmtoll TDR TDR LL_USART_TransmitData9
+ * @param USARTx USART Instance
+ * @param Value between Min_Data=0x00 and Max_Data=0x1FF
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_TransmitData9(USART_TypeDef *USARTx, uint16_t Value)
+{
+ USARTx->TDR = (uint16_t)(Value & 0x1FFUL);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_LL_EF_Execution Execution
+ * @{
+ */
+
+/**
+ * @brief Request an Automatic Baud Rate measurement on next received data frame
+ * @note Macro @ref IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not
+ * Auto Baud Rate detection feature is supported by the USARTx instance.
+ * @rmtoll RQR ABRRQ LL_USART_RequestAutoBaudRate
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_RequestAutoBaudRate(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->RQR, (uint16_t)USART_RQR_ABRRQ);
+}
+
+/**
+ * @brief Request Break sending
+ * @rmtoll RQR SBKRQ LL_USART_RequestBreakSending
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_RequestBreakSending(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->RQR, (uint16_t)USART_RQR_SBKRQ);
+}
+
+/**
+ * @brief Put USART in mute mode and set the RWU flag
+ * @rmtoll RQR MMRQ LL_USART_RequestEnterMuteMode
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_RequestEnterMuteMode(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->RQR, (uint16_t)USART_RQR_MMRQ);
+}
+
+/**
+ * @brief Request a Receive Data flush
+ * @note Allows to discard the received data without reading them, and avoid an overrun
+ * condition.
+ * @rmtoll RQR RXFRQ LL_USART_RequestRxDataFlush
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_RequestRxDataFlush(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->RQR, (uint16_t)USART_RQR_RXFRQ);
+}
+
+#if defined(USART_SMARTCARD_SUPPORT)
+/**
+ * @brief Request a Transmit data flush
+ * @note Macro @ref IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not
+ * Smartcard feature is supported by the USARTx instance.
+ * @rmtoll RQR TXFRQ LL_USART_RequestTxDataFlush
+ * @param USARTx USART Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_USART_RequestTxDataFlush(USART_TypeDef *USARTx)
+{
+ SET_BIT(USARTx->RQR, (uint16_t)USART_RQR_TXFRQ);
+}
+#endif /*USART_SMARTCARD_SUPPORT*/
+
+/**
+ * @}
+ */
+
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup USART_LL_EF_Init Initialization and de-initialization functions
+ * @{
+ */
+ErrorStatus LL_USART_DeInit(USART_TypeDef *USARTx);
+ErrorStatus LL_USART_Init(USART_TypeDef *USARTx, LL_USART_InitTypeDef *USART_InitStruct);
+void LL_USART_StructInit(LL_USART_InitTypeDef *USART_InitStruct);
+ErrorStatus LL_USART_ClockInit(USART_TypeDef *USARTx, LL_USART_ClockInitTypeDef *USART_ClockInitStruct);
+void LL_USART_ClockStructInit(LL_USART_ClockInitTypeDef *USART_ClockInitStruct);
+/**
+ * @}
+ */
+#endif /* USE_FULL_LL_DRIVER */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* USART1 || USART2 || USART3 || UART4 || UART5 || USART6 || USART7 || USART8 */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32F0xx_LL_USART_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_usb.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_usb.h
new file mode 100644
index 0000000..4197cb6
--- /dev/null
+++ b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_usb.h
@@ -0,0 +1,237 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_ll_usb.h
+ * @author MCD Application Team
+ * @brief Header file of USB Low Layer HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32F0xx_LL_USB_H
+#define STM32F0xx_LL_USB_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+#if defined (USB)
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup USB_LL
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief USB Mode definition
+ */
+
+
+
+typedef enum
+{
+ USB_DEVICE_MODE = 0
+} USB_ModeTypeDef;
+
+/**
+ * @brief USB Initialization Structure definition
+ */
+typedef struct
+{
+ uint32_t dev_endpoints; /*!< Device Endpoints number.
+ This parameter depends on the used USB core.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
+
+ uint32_t speed; /*!< USB Core speed.
+ This parameter can be any value of @ref USB_Core_Speed */
+
+ uint32_t ep0_mps; /*!< Set the Endpoint 0 Max Packet size. */
+
+ uint32_t phy_itface; /*!< Select the used PHY interface.
+ This parameter can be any value of @ref USB_Core_PHY */
+
+ uint32_t Sof_enable; /*!< Enable or disable the output of the SOF signal. */
+
+ uint32_t low_power_enable; /*!< Enable or disable Low Power mode */
+
+ uint32_t lpm_enable; /*!< Enable or disable Battery charging. */
+
+ uint32_t battery_charging_enable; /*!< Enable or disable Battery charging. */
+} USB_CfgTypeDef;
+
+typedef struct
+{
+ uint8_t num; /*!< Endpoint number
+ This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
+
+ uint8_t is_in; /*!< Endpoint direction
+ This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
+
+ uint8_t is_stall; /*!< Endpoint stall condition
+ This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
+
+ uint8_t type; /*!< Endpoint type
+ This parameter can be any value of @ref USB_EP_Type */
+
+ uint8_t data_pid_start; /*!< Initial data PID
+ This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
+
+ uint16_t pmaadress; /*!< PMA Address
+ This parameter can be any value between Min_addr = 0 and Max_addr = 1K */
+
+ uint16_t pmaaddr0; /*!< PMA Address0
+ This parameter can be any value between Min_addr = 0 and Max_addr = 1K */
+
+ uint16_t pmaaddr1; /*!< PMA Address1
+ This parameter can be any value between Min_addr = 0 and Max_addr = 1K */
+
+ uint8_t doublebuffer; /*!< Double buffer enable
+ This parameter can be 0 or 1 */
+
+ uint16_t tx_fifo_num; /*!< This parameter is not required by USB Device FS peripheral, it is used
+ only by USB OTG FS peripheral
+ This parameter is added to ensure compatibility across USB peripherals */
+
+ uint32_t maxpacket; /*!< Endpoint Max packet size
+ This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */
+
+ uint8_t *xfer_buff; /*!< Pointer to transfer buffer */
+
+ uint32_t xfer_len; /*!< Current transfer length */
+
+ uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer */
+
+} USB_EPTypeDef;
+
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup PCD_Exported_Constants PCD Exported Constants
+ * @{
+ */
+
+
+/** @defgroup USB_LL_EP0_MPS USB Low Layer EP0 MPS
+ * @{
+ */
+#define DEP0CTL_MPS_64 0U
+#define DEP0CTL_MPS_32 1U
+#define DEP0CTL_MPS_16 2U
+#define DEP0CTL_MPS_8 3U
+/**
+ * @}
+ */
+
+/** @defgroup USB_LL_EP_Type USB Low Layer EP Type
+ * @{
+ */
+#define EP_TYPE_CTRL 0U
+#define EP_TYPE_ISOC 1U
+#define EP_TYPE_BULK 2U
+#define EP_TYPE_INTR 3U
+#define EP_TYPE_MSK 3U
+/**
+ * @}
+ */
+
+/** @defgroup USB_LL Device Speed
+ * @{
+ */
+#define USBD_FS_SPEED 2U
+/**
+ * @}
+ */
+
+#define BTABLE_ADDRESS 0x000U
+#define PMA_ACCESS 1U
+
+#define EP_ADDR_MSK 0x7U
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup USB_LL_Exported_Functions USB Low Layer Exported Functions
+ * @{
+ */
+
+
+HAL_StatusTypeDef USB_CoreInit(USB_TypeDef *USBx, USB_CfgTypeDef cfg);
+HAL_StatusTypeDef USB_DevInit(USB_TypeDef *USBx, USB_CfgTypeDef cfg);
+HAL_StatusTypeDef USB_EnableGlobalInt(USB_TypeDef *USBx);
+HAL_StatusTypeDef USB_DisableGlobalInt(USB_TypeDef *USBx);
+HAL_StatusTypeDef USB_SetCurrentMode(USB_TypeDef *USBx, USB_ModeTypeDef mode);
+HAL_StatusTypeDef USB_SetDevSpeed(USB_TypeDef *USBx, uint8_t speed);
+HAL_StatusTypeDef USB_FlushRxFifo(USB_TypeDef *USBx);
+HAL_StatusTypeDef USB_FlushTxFifo(USB_TypeDef *USBx, uint32_t num);
+HAL_StatusTypeDef USB_ActivateEndpoint(USB_TypeDef *USBx, USB_EPTypeDef *ep);
+HAL_StatusTypeDef USB_DeactivateEndpoint(USB_TypeDef *USBx, USB_EPTypeDef *ep);
+HAL_StatusTypeDef USB_EPStartXfer(USB_TypeDef *USBx, USB_EPTypeDef *ep);
+HAL_StatusTypeDef USB_WritePacket(USB_TypeDef *USBx, uint8_t *src, uint8_t ch_ep_num, uint16_t len);
+void *USB_ReadPacket(USB_TypeDef *USBx, uint8_t *dest, uint16_t len);
+HAL_StatusTypeDef USB_EPSetStall(USB_TypeDef *USBx, USB_EPTypeDef *ep);
+HAL_StatusTypeDef USB_EPClearStall(USB_TypeDef *USBx, USB_EPTypeDef *ep);
+HAL_StatusTypeDef USB_SetDevAddress(USB_TypeDef *USBx, uint8_t address);
+HAL_StatusTypeDef USB_DevConnect(USB_TypeDef *USBx);
+HAL_StatusTypeDef USB_DevDisconnect(USB_TypeDef *USBx);
+HAL_StatusTypeDef USB_StopDevice(USB_TypeDef *USBx);
+HAL_StatusTypeDef USB_EP0_OutStart(USB_TypeDef *USBx, uint8_t *psetup);
+uint32_t USB_ReadInterrupts(USB_TypeDef *USBx);
+uint32_t USB_ReadDevAllOutEpInterrupt(USB_TypeDef *USBx);
+uint32_t USB_ReadDevOutEPInterrupt(USB_TypeDef *USBx, uint8_t epnum);
+uint32_t USB_ReadDevAllInEpInterrupt(USB_TypeDef *USBx);
+uint32_t USB_ReadDevInEPInterrupt(USB_TypeDef *USBx, uint8_t epnum);
+void USB_ClearInterrupts(USB_TypeDef *USBx, uint32_t interrupt);
+
+HAL_StatusTypeDef USB_ActivateRemoteWakeup(USB_TypeDef *USBx);
+HAL_StatusTypeDef USB_DeActivateRemoteWakeup(USB_TypeDef *USBx);
+void USB_WritePMA(USB_TypeDef *USBx, uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes);
+void USB_ReadPMA(USB_TypeDef *USBx, uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* defined (USB) */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* STM32F0xx_LL_USB_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_utils.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_utils.h
new file mode 100644
index 0000000..9150148
--- /dev/null
+++ b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_utils.h
@@ -0,0 +1,271 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_ll_utils.h
+ * @author MCD Application Team
+ * @brief Header file of UTILS LL module.
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ The LL UTILS driver contains a set of generic APIs that can be
+ used by user:
+ (+) Device electronic signature
+ (+) Timing functions
+ (+) PLL configuration functions
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_LL_UTILS_H
+#define __STM32F0xx_LL_UTILS_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx.h"
+
+/** @addtogroup STM32F0xx_LL_Driver
+ * @{
+ */
+
+/** @defgroup UTILS_LL UTILS
+ * @{
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup UTILS_LL_Private_Constants UTILS Private Constants
+ * @{
+ */
+
+/* Max delay can be used in LL_mDelay */
+#define LL_MAX_DELAY 0xFFFFFFFFU
+
+/**
+ * @brief Unique device ID register base address
+ */
+#define UID_BASE_ADDRESS UID_BASE
+
+/**
+ * @brief Flash size data register base address
+ */
+#define FLASHSIZE_BASE_ADDRESS FLASHSIZE_BASE
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup UTILS_LL_Private_Macros UTILS Private Macros
+ * @{
+ */
+/**
+ * @}
+ */
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup UTILS_LL_ES_INIT UTILS Exported structures
+ * @{
+ */
+/**
+ * @brief UTILS PLL structure definition
+ */
+typedef struct
+{
+ uint32_t PLLMul; /*!< Multiplication factor for PLL VCO input clock.
+ This parameter can be a value of @ref RCC_LL_EC_PLL_MUL
+
+ This feature can be modified afterwards using unitary function
+ @ref LL_RCC_PLL_ConfigDomain_SYS(). */
+
+#if defined(RCC_PLLSRC_PREDIV1_SUPPORT)
+ uint32_t PLLDiv; /*!< Division factor for PLL VCO output clock.
+ This parameter can be a value of @ref RCC_LL_EC_PREDIV_DIV
+
+ This feature can be modified afterwards using unitary function
+ @ref LL_RCC_PLL_ConfigDomain_SYS(). */
+#else
+ uint32_t Prediv; /*!< Division factor for HSE used as PLL clock source.
+ This parameter can be a value of @ref RCC_LL_EC_PREDIV_DIV
+
+ This feature can be modified afterwards using unitary function
+ @ref LL_RCC_PLL_ConfigDomain_SYS(). */
+#endif /* RCC_PLLSRC_PREDIV1_SUPPORT */
+} LL_UTILS_PLLInitTypeDef;
+
+/**
+ * @brief UTILS System, AHB and APB buses clock configuration structure definition
+ */
+typedef struct
+{
+ uint32_t AHBCLKDivider; /*!< The AHB clock (HCLK) divider. This clock is derived from the system clock (SYSCLK).
+ This parameter can be a value of @ref RCC_LL_EC_SYSCLK_DIV
+
+ This feature can be modified afterwards using unitary function
+ @ref LL_RCC_SetAHBPrescaler(). */
+
+ uint32_t APB1CLKDivider; /*!< The APB1 clock (PCLK1) divider. This clock is derived from the AHB clock (HCLK).
+ This parameter can be a value of @ref RCC_LL_EC_APB1_DIV
+
+ This feature can be modified afterwards using unitary function
+ @ref LL_RCC_SetAPB1Prescaler(). */
+} LL_UTILS_ClkInitTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup UTILS_LL_Exported_Constants UTILS Exported Constants
+ * @{
+ */
+
+/** @defgroup UTILS_EC_HSE_BYPASS HSE Bypass activation
+ * @{
+ */
+#define LL_UTILS_HSEBYPASS_OFF 0x00000000U /*!< HSE Bypass is not enabled */
+#define LL_UTILS_HSEBYPASS_ON 0x00000001U /*!< HSE Bypass is enabled */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup UTILS_LL_Exported_Functions UTILS Exported Functions
+ * @{
+ */
+
+/** @defgroup UTILS_EF_DEVICE_ELECTRONIC_SIGNATURE DEVICE ELECTRONIC SIGNATURE
+ * @{
+ */
+
+/**
+ * @brief Get Word0 of the unique device identifier (UID based on 96 bits)
+ * @retval UID[31:0]: X and Y coordinates on the wafer expressed in BCD format
+ */
+__STATIC_INLINE uint32_t LL_GetUID_Word0(void)
+{
+ return (uint32_t)(READ_REG(*((uint32_t *)UID_BASE_ADDRESS)));
+}
+
+/**
+ * @brief Get Word1 of the unique device identifier (UID based on 96 bits)
+ * @retval UID[63:32]: Wafer number (UID[39:32]) & LOT_NUM[23:0] (UID[63:40])
+ */
+__STATIC_INLINE uint32_t LL_GetUID_Word1(void)
+{
+ return (uint32_t)(READ_REG(*((uint32_t *)(UID_BASE_ADDRESS + 4U))));
+}
+
+/**
+ * @brief Get Word2 of the unique device identifier (UID based on 96 bits)
+ * @retval UID[95:64]: Lot number (ASCII encoded) - LOT_NUM[55:24]
+ */
+__STATIC_INLINE uint32_t LL_GetUID_Word2(void)
+{
+ return (uint32_t)(READ_REG(*((uint32_t *)(UID_BASE_ADDRESS + 8U))));
+}
+
+/**
+ * @brief Get Flash memory size
+ * @note This bitfield indicates the size of the device Flash memory expressed in
+ * Kbytes. As an example, 0x040 corresponds to 64 Kbytes.
+ * @retval FLASH_SIZE[15:0]: Flash memory size
+ */
+__STATIC_INLINE uint32_t LL_GetFlashSize(void)
+{
+ return (uint16_t)(READ_REG(*((uint32_t *)FLASHSIZE_BASE_ADDRESS)));
+}
+
+
+/**
+ * @}
+ */
+
+/** @defgroup UTILS_LL_EF_DELAY DELAY
+ * @{
+ */
+
+/**
+ * @brief This function configures the Cortex-M SysTick source of the time base.
+ * @param HCLKFrequency HCLK frequency in Hz (can be calculated thanks to RCC helper macro)
+ * @note When a RTOS is used, it is recommended to avoid changing the SysTick
+ * configuration by calling this function, for a delay use rather osDelay RTOS service.
+ * @param Ticks Number of ticks
+ * @retval None
+ */
+__STATIC_INLINE void LL_InitTick(uint32_t HCLKFrequency, uint32_t Ticks)
+{
+ /* Configure the SysTick to have interrupt in 1ms time base */
+ SysTick->LOAD = (uint32_t)((HCLKFrequency / Ticks) - 1UL); /* set reload register */
+ SysTick->VAL = 0UL; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable the Systick Timer */
+}
+
+void LL_Init1msTick(uint32_t HCLKFrequency);
+void LL_mDelay(uint32_t Delay);
+
+/**
+ * @}
+ */
+
+/** @defgroup UTILS_EF_SYSTEM SYSTEM
+ * @{
+ */
+
+void LL_SetSystemCoreClock(uint32_t HCLKFrequency);
+ErrorStatus LL_PLL_ConfigSystemClock_HSI(LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct,
+ LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct);
+#if defined(RCC_CFGR_SW_HSI48)
+ErrorStatus LL_PLL_ConfigSystemClock_HSI48(LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct,
+ LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct);
+#endif /*RCC_CFGR_SW_HSI48*/
+ErrorStatus LL_PLL_ConfigSystemClock_HSE(uint32_t HSEFrequency, uint32_t HSEBypass,
+ LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct, LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_LL_UTILS_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_wwdg.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_wwdg.h
new file mode 100644
index 0000000..d835f04
--- /dev/null
+++ b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_wwdg.h
@@ -0,0 +1,319 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_ll_wwdg.h
+ * @author MCD Application Team
+ * @brief Header file of WWDG LL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32F0xx_LL_WWDG_H
+#define STM32F0xx_LL_WWDG_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx.h"
+
+/** @addtogroup STM32F0xx_LL_Driver
+ * @{
+ */
+
+#if defined (WWDG)
+
+/** @defgroup WWDG_LL WWDG
+ * @{
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup WWDG_LL_Exported_Constants WWDG Exported Constants
+ * @{
+ */
+
+/** @defgroup WWDG_LL_EC_IT IT Defines
+ * @brief IT defines which can be used with LL_WWDG_ReadReg and LL_WWDG_WriteReg functions
+ * @{
+ */
+#define LL_WWDG_CFR_EWI WWDG_CFR_EWI
+/**
+ * @}
+ */
+
+/** @defgroup WWDG_LL_EC_PRESCALER PRESCALER
+ * @{
+ */
+#define LL_WWDG_PRESCALER_1 0x00000000u /*!< WWDG counter clock = (PCLK1/4096)/1 */
+#define LL_WWDG_PRESCALER_2 WWDG_CFR_WDGTB_0 /*!< WWDG counter clock = (PCLK1/4096)/2 */
+#define LL_WWDG_PRESCALER_4 WWDG_CFR_WDGTB_1 /*!< WWDG counter clock = (PCLK1/4096)/4 */
+#define LL_WWDG_PRESCALER_8 (WWDG_CFR_WDGTB_0 | WWDG_CFR_WDGTB_1) /*!< WWDG counter clock = (PCLK1/4096)/8 */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup WWDG_LL_Exported_Macros WWDG Exported Macros
+ * @{
+ */
+/** @defgroup WWDG_LL_EM_WRITE_READ Common Write and read registers macros
+ * @{
+ */
+/**
+ * @brief Write a value in WWDG register
+ * @param __INSTANCE__ WWDG Instance
+ * @param __REG__ Register to be written
+ * @param __VALUE__ Value to be written in the register
+ * @retval None
+ */
+#define LL_WWDG_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__))
+
+/**
+ * @brief Read a value in WWDG register
+ * @param __INSTANCE__ WWDG Instance
+ * @param __REG__ Register to be read
+ * @retval Register value
+ */
+#define LL_WWDG_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup WWDG_LL_Exported_Functions WWDG Exported Functions
+ * @{
+ */
+
+/** @defgroup WWDG_LL_EF_Configuration Configuration
+ * @{
+ */
+/**
+ * @brief Enable Window Watchdog. The watchdog is always disabled after a reset.
+ * @note It is enabled by setting the WDGA bit in the WWDG_CR register,
+ * then it cannot be disabled again except by a reset.
+ * This bit is set by software and only cleared by hardware after a reset.
+ * When WDGA = 1, the watchdog can generate a reset.
+ * @rmtoll CR WDGA LL_WWDG_Enable
+ * @param WWDGx WWDG Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_WWDG_Enable(WWDG_TypeDef *WWDGx)
+{
+ SET_BIT(WWDGx->CR, WWDG_CR_WDGA);
+}
+
+/**
+ * @brief Checks if Window Watchdog is enabled
+ * @rmtoll CR WDGA LL_WWDG_IsEnabled
+ * @param WWDGx WWDG Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_WWDG_IsEnabled(WWDG_TypeDef *WWDGx)
+{
+ return ((READ_BIT(WWDGx->CR, WWDG_CR_WDGA) == (WWDG_CR_WDGA)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Set the Watchdog counter value to provided value (7-bits T[6:0])
+ * @note When writing to the WWDG_CR register, always write 1 in the MSB b6 to avoid generating an immediate reset
+ * This counter is decremented every (4096 x 2expWDGTB) PCLK cycles
+ * A reset is produced when it rolls over from 0x40 to 0x3F (bit T6 becomes cleared)
+ * Setting the counter lower then 0x40 causes an immediate reset (if WWDG enabled)
+ * @rmtoll CR T LL_WWDG_SetCounter
+ * @param WWDGx WWDG Instance
+ * @param Counter 0..0x7F (7 bit counter value)
+ * @retval None
+ */
+__STATIC_INLINE void LL_WWDG_SetCounter(WWDG_TypeDef *WWDGx, uint32_t Counter)
+{
+ MODIFY_REG(WWDGx->CR, WWDG_CR_T, Counter);
+}
+
+/**
+ * @brief Return current Watchdog Counter Value (7 bits counter value)
+ * @rmtoll CR T LL_WWDG_GetCounter
+ * @param WWDGx WWDG Instance
+ * @retval 7 bit Watchdog Counter value
+ */
+__STATIC_INLINE uint32_t LL_WWDG_GetCounter(WWDG_TypeDef *WWDGx)
+{
+ return (READ_BIT(WWDGx->CR, WWDG_CR_T));
+}
+
+/**
+ * @brief Set the time base of the prescaler (WDGTB).
+ * @note Prescaler is used to apply ratio on PCLK clock, so that Watchdog counter
+ * is decremented every (4096 x 2expWDGTB) PCLK cycles
+ * @rmtoll CFR WDGTB LL_WWDG_SetPrescaler
+ * @param WWDGx WWDG Instance
+ * @param Prescaler This parameter can be one of the following values:
+ * @arg @ref LL_WWDG_PRESCALER_1
+ * @arg @ref LL_WWDG_PRESCALER_2
+ * @arg @ref LL_WWDG_PRESCALER_4
+ * @arg @ref LL_WWDG_PRESCALER_8
+ * @retval None
+ */
+__STATIC_INLINE void LL_WWDG_SetPrescaler(WWDG_TypeDef *WWDGx, uint32_t Prescaler)
+{
+ MODIFY_REG(WWDGx->CFR, WWDG_CFR_WDGTB, Prescaler);
+}
+
+/**
+ * @brief Return current Watchdog Prescaler Value
+ * @rmtoll CFR WDGTB LL_WWDG_GetPrescaler
+ * @param WWDGx WWDG Instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_WWDG_PRESCALER_1
+ * @arg @ref LL_WWDG_PRESCALER_2
+ * @arg @ref LL_WWDG_PRESCALER_4
+ * @arg @ref LL_WWDG_PRESCALER_8
+ */
+__STATIC_INLINE uint32_t LL_WWDG_GetPrescaler(WWDG_TypeDef *WWDGx)
+{
+ return (READ_BIT(WWDGx->CFR, WWDG_CFR_WDGTB));
+}
+
+/**
+ * @brief Set the Watchdog Window value to be compared to the downcounter (7-bits W[6:0]).
+ * @note This window value defines when write in the WWDG_CR register
+ * to program Watchdog counter is allowed.
+ * Watchdog counter value update must occur only when the counter value
+ * is lower than the Watchdog window register value.
+ * Otherwise, a MCU reset is generated if the 7-bit Watchdog counter value
+ * (in the control register) is refreshed before the downcounter has reached
+ * the watchdog window register value.
+ * Physically is possible to set the Window lower then 0x40 but it is not recommended.
+ * To generate an immediate reset, it is possible to set the Counter lower than 0x40.
+ * @rmtoll CFR W LL_WWDG_SetWindow
+ * @param WWDGx WWDG Instance
+ * @param Window 0x00..0x7F (7 bit Window value)
+ * @retval None
+ */
+__STATIC_INLINE void LL_WWDG_SetWindow(WWDG_TypeDef *WWDGx, uint32_t Window)
+{
+ MODIFY_REG(WWDGx->CFR, WWDG_CFR_W, Window);
+}
+
+/**
+ * @brief Return current Watchdog Window Value (7 bits value)
+ * @rmtoll CFR W LL_WWDG_GetWindow
+ * @param WWDGx WWDG Instance
+ * @retval 7 bit Watchdog Window value
+ */
+__STATIC_INLINE uint32_t LL_WWDG_GetWindow(WWDG_TypeDef *WWDGx)
+{
+ return (READ_BIT(WWDGx->CFR, WWDG_CFR_W));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup WWDG_LL_EF_FLAG_Management FLAG_Management
+ * @{
+ */
+/**
+ * @brief Indicates if the WWDG Early Wakeup Interrupt Flag is set or not.
+ * @note This bit is set by hardware when the counter has reached the value 0x40.
+ * It must be cleared by software by writing 0.
+ * A write of 1 has no effect. This bit is also set if the interrupt is not enabled.
+ * @rmtoll SR EWIF LL_WWDG_IsActiveFlag_EWKUP
+ * @param WWDGx WWDG Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_WWDG_IsActiveFlag_EWKUP(WWDG_TypeDef *WWDGx)
+{
+ return ((READ_BIT(WWDGx->SR, WWDG_SR_EWIF) == (WWDG_SR_EWIF)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Clear WWDG Early Wakeup Interrupt Flag (EWIF)
+ * @rmtoll SR EWIF LL_WWDG_ClearFlag_EWKUP
+ * @param WWDGx WWDG Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_WWDG_ClearFlag_EWKUP(WWDG_TypeDef *WWDGx)
+{
+ WRITE_REG(WWDGx->SR, ~WWDG_SR_EWIF);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup WWDG_LL_EF_IT_Management IT_Management
+ * @{
+ */
+/**
+ * @brief Enable the Early Wakeup Interrupt.
+ * @note When set, an interrupt occurs whenever the counter reaches value 0x40.
+ * This interrupt is only cleared by hardware after a reset
+ * @rmtoll CFR EWI LL_WWDG_EnableIT_EWKUP
+ * @param WWDGx WWDG Instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_WWDG_EnableIT_EWKUP(WWDG_TypeDef *WWDGx)
+{
+ SET_BIT(WWDGx->CFR, WWDG_CFR_EWI);
+}
+
+/**
+ * @brief Check if Early Wakeup Interrupt is enabled
+ * @rmtoll CFR EWI LL_WWDG_IsEnabledIT_EWKUP
+ * @param WWDGx WWDG Instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_WWDG_IsEnabledIT_EWKUP(WWDG_TypeDef *WWDGx)
+{
+ return ((READ_BIT(WWDGx->CFR, WWDG_CFR_EWI) == (WWDG_CFR_EWI)) ? 1UL : 0UL);
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* WWDG */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32F0xx_LL_WWDG_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/