diff options
Diffstat (limited to 'Blink/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc')
16 files changed, 0 insertions, 4524 deletions
diff --git a/Blink/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f030x6.s b/Blink/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f030x6.s deleted file mode 100644 index 727c24d..0000000 --- a/Blink/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f030x6.s +++ /dev/null @@ -1,258 +0,0 @@ -/**
- ******************************************************************************
- * @file startup_stm32f030x6.s
- * @author MCD Application Team
- * @brief STM32F030x4/STM32F030x6 devices vector table for GCC toolchain.
- * This module performs:
- * - Set the initial SP
- * - Set the initial PC == Reset_Handler,
- * - Set the vector table entries with the exceptions ISR address
- * - Branches to main in the C library (which eventually
- * calls main()).
- * After Reset the Cortex-M0 processor is in Thread mode,
- * priority is Privileged, and the Stack is set to Main.
- ******************************************************************************
- * @attention
- *
- * <h2><center>© Copyright (c) 2016 STMicroelectronics.
- * All rights reserved.</center></h2>
- *
- * This software component is licensed by ST under BSD 3-Clause license,
- * the "License"; You may not use this file except in compliance with the
- * License. You may obtain a copy of the License at:
- * opensource.org/licenses/BSD-3-Clause
- *
- ******************************************************************************
- */
-
- .syntax unified
- .cpu cortex-m0
- .fpu softvfp
- .thumb
-
-.global g_pfnVectors
-.global Default_Handler
-
-/* start address for the initialization values of the .data section.
-defined in linker script */
-.word _sidata
-/* start address for the .data section. defined in linker script */
-.word _sdata
-/* end address for the .data section. defined in linker script */
-.word _edata
-/* start address for the .bss section. defined in linker script */
-.word _sbss
-/* end address for the .bss section. defined in linker script */
-.word _ebss
-
- .section .text.Reset_Handler
- .weak Reset_Handler
- .type Reset_Handler, %function
-Reset_Handler:
- ldr r0, =_estack
- mov sp, r0 /* set stack pointer */
-
-/* Copy the data segment initializers from flash to SRAM */
- ldr r0, =_sdata
- ldr r1, =_edata
- ldr r2, =_sidata
- movs r3, #0
- b LoopCopyDataInit
-
-CopyDataInit:
- ldr r4, [r2, r3]
- str r4, [r0, r3]
- adds r3, r3, #4
-
-LoopCopyDataInit:
- adds r4, r0, r3
- cmp r4, r1
- bcc CopyDataInit
-
-/* Zero fill the bss segment. */
- ldr r2, =_sbss
- ldr r4, =_ebss
- movs r3, #0
- b LoopFillZerobss
-
-FillZerobss:
- str r3, [r2]
- adds r2, r2, #4
-
-LoopFillZerobss:
- cmp r2, r4
- bcc FillZerobss
-
-/* Call the clock system intitialization function.*/
- bl SystemInit
-/* Call static constructors */
- bl __libc_init_array
-/* Call the application's entry point.*/
- bl main
-
-LoopForever:
- b LoopForever
-
-
-.size Reset_Handler, .-Reset_Handler
-
-/**
- * @brief This is the code that gets called when the processor receives an
- * unexpected interrupt. This simply enters an infinite loop, preserving
- * the system state for examination by a debugger.
- *
- * @param None
- * @retval : None
-*/
- .section .text.Default_Handler,"ax",%progbits
-Default_Handler:
-Infinite_Loop:
- b Infinite_Loop
- .size Default_Handler, .-Default_Handler
-/******************************************************************************
-*
-* The minimal vector table for a Cortex M0. Note that the proper constructs
-* must be placed on this to ensure that it ends up at physical address
-* 0x0000.0000.
-*
-******************************************************************************/
- .section .isr_vector,"a",%progbits
- .type g_pfnVectors, %object
- .size g_pfnVectors, .-g_pfnVectors
-
-
-g_pfnVectors:
- .word _estack
- .word Reset_Handler
- .word NMI_Handler
- .word HardFault_Handler
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word SVC_Handler
- .word 0
- .word 0
- .word PendSV_Handler
- .word SysTick_Handler
- .word WWDG_IRQHandler /* Window WatchDog */
- .word 0 /* Reserved */
- .word RTC_IRQHandler /* RTC through the EXTI line */
- .word FLASH_IRQHandler /* FLASH */
- .word RCC_IRQHandler /* RCC */
- .word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
- .word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
- .word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
- .word 0 /* Reserved */
- .word DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */
- .word DMA1_Channel2_3_IRQHandler /* DMA1 Channel 2 and Channel 3 */
- .word DMA1_Channel4_5_IRQHandler /* DMA1 Channel 4 and Channel 5 */
- .word ADC1_IRQHandler /* ADC1 */
- .word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
- .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
- .word 0 /* Reserved */
- .word TIM3_IRQHandler /* TIM3 */
- .word 0 /* Reserved */
- .word 0 /* Reserved */
- .word TIM14_IRQHandler /* TIM14 */
- .word 0 /* Reserved */
- .word TIM16_IRQHandler /* TIM16 */
- .word TIM17_IRQHandler /* TIM17 */
- .word I2C1_IRQHandler /* I2C1 */
- .word 0 /* Reserved */
- .word SPI1_IRQHandler /* SPI1 */
- .word 0 /* Reserved */
- .word USART1_IRQHandler /* USART1 */
- .word 0 /* Reserved */
- .word 0 /* Reserved */
- .word 0 /* Reserved */
- .word 0 /* Reserved */
-
-/*******************************************************************************
-*
-* Provide weak aliases for each Exception handler to the Default_Handler.
-* As they are weak aliases, any function with the same name will override
-* this definition.
-*
-*******************************************************************************/
-
- .weak NMI_Handler
- .thumb_set NMI_Handler,Default_Handler
-
- .weak HardFault_Handler
- .thumb_set HardFault_Handler,Default_Handler
-
- .weak SVC_Handler
- .thumb_set SVC_Handler,Default_Handler
-
- .weak PendSV_Handler
- .thumb_set PendSV_Handler,Default_Handler
-
- .weak SysTick_Handler
- .thumb_set SysTick_Handler,Default_Handler
-
- .weak WWDG_IRQHandler
- .thumb_set WWDG_IRQHandler,Default_Handler
-
- .weak RTC_IRQHandler
- .thumb_set RTC_IRQHandler,Default_Handler
-
- .weak FLASH_IRQHandler
- .thumb_set FLASH_IRQHandler,Default_Handler
-
- .weak RCC_IRQHandler
- .thumb_set RCC_IRQHandler,Default_Handler
-
- .weak EXTI0_1_IRQHandler
- .thumb_set EXTI0_1_IRQHandler,Default_Handler
-
- .weak EXTI2_3_IRQHandler
- .thumb_set EXTI2_3_IRQHandler,Default_Handler
-
- .weak EXTI4_15_IRQHandler
- .thumb_set EXTI4_15_IRQHandler,Default_Handler
-
- .weak DMA1_Channel1_IRQHandler
- .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
-
- .weak DMA1_Channel2_3_IRQHandler
- .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler
-
- .weak DMA1_Channel4_5_IRQHandler
- .thumb_set DMA1_Channel4_5_IRQHandler,Default_Handler
-
- .weak ADC1_IRQHandler
- .thumb_set ADC1_IRQHandler,Default_Handler
-
- .weak TIM1_BRK_UP_TRG_COM_IRQHandler
- .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
-
- .weak TIM1_CC_IRQHandler
- .thumb_set TIM1_CC_IRQHandler,Default_Handler
-
- .weak TIM3_IRQHandler
- .thumb_set TIM3_IRQHandler,Default_Handler
-
- .weak TIM14_IRQHandler
- .thumb_set TIM14_IRQHandler,Default_Handler
-
- .weak TIM16_IRQHandler
- .thumb_set TIM16_IRQHandler,Default_Handler
-
- .weak TIM17_IRQHandler
- .thumb_set TIM17_IRQHandler,Default_Handler
-
- .weak I2C1_IRQHandler
- .thumb_set I2C1_IRQHandler,Default_Handler
-
- .weak SPI1_IRQHandler
- .thumb_set SPI1_IRQHandler,Default_Handler
-
- .weak USART1_IRQHandler
- .thumb_set USART1_IRQHandler,Default_Handler
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
-
diff --git a/Blink/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f030x8.s b/Blink/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f030x8.s deleted file mode 100644 index ff3496e..0000000 --- a/Blink/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f030x8.s +++ /dev/null @@ -1,273 +0,0 @@ -/**
- ******************************************************************************
- * @file startup_stm32f030x8.s
- * @author MCD Application Team
- * @brief STM32F030x8 devices vector table for GCC toolchain.
- * This module performs:
- * - Set the initial SP
- * - Set the initial PC == Reset_Handler,
- * - Set the vector table entries with the exceptions ISR address
- * - Branches to main in the C library (which eventually
- * calls main()).
- * After Reset the Cortex-M0 processor is in Thread mode,
- * priority is Privileged, and the Stack is set to Main.
- ******************************************************************************
- * @attention
- *
- * <h2><center>© Copyright (c) 2016 STMicroelectronics.
- * All rights reserved.</center></h2>
- *
- * This software component is licensed by ST under BSD 3-Clause license,
- * the "License"; You may not use this file except in compliance with the
- * License. You may obtain a copy of the License at:
- * opensource.org/licenses/BSD-3-Clause
- *
- ******************************************************************************
- */
-
- .syntax unified
- .cpu cortex-m0
- .fpu softvfp
- .thumb
-
-.global g_pfnVectors
-.global Default_Handler
-
-/* start address for the initialization values of the .data section.
-defined in linker script */
-.word _sidata
-/* start address for the .data section. defined in linker script */
-.word _sdata
-/* end address for the .data section. defined in linker script */
-.word _edata
-/* start address for the .bss section. defined in linker script */
-.word _sbss
-/* end address for the .bss section. defined in linker script */
-.word _ebss
-
- .section .text.Reset_Handler
- .weak Reset_Handler
- .type Reset_Handler, %function
-Reset_Handler:
- ldr r0, =_estack
- mov sp, r0 /* set stack pointer */
-
-/* Copy the data segment initializers from flash to SRAM */
- ldr r0, =_sdata
- ldr r1, =_edata
- ldr r2, =_sidata
- movs r3, #0
- b LoopCopyDataInit
-
-CopyDataInit:
- ldr r4, [r2, r3]
- str r4, [r0, r3]
- adds r3, r3, #4
-
-LoopCopyDataInit:
- adds r4, r0, r3
- cmp r4, r1
- bcc CopyDataInit
-
-/* Zero fill the bss segment. */
- ldr r2, =_sbss
- ldr r4, =_ebss
- movs r3, #0
- b LoopFillZerobss
-
-FillZerobss:
- str r3, [r2]
- adds r2, r2, #4
-
-LoopFillZerobss:
- cmp r2, r4
- bcc FillZerobss
-
-/* Call the clock system intitialization function.*/
- bl SystemInit
-/* Call static constructors */
- bl __libc_init_array
-/* Call the application's entry point.*/
- bl main
-
-LoopForever:
- b LoopForever
-
-
-.size Reset_Handler, .-Reset_Handler
-
-/**
- * @brief This is the code that gets called when the processor receives an
- * unexpected interrupt. This simply enters an infinite loop, preserving
- * the system state for examination by a debugger.
- *
- * @param None
- * @retval : None
-*/
- .section .text.Default_Handler,"ax",%progbits
-Default_Handler:
-Infinite_Loop:
- b Infinite_Loop
- .size Default_Handler, .-Default_Handler
-/******************************************************************************
-*
-* The minimal vector table for a Cortex M0. Note that the proper constructs
-* must be placed on this to ensure that it ends up at physical address
-* 0x0000.0000.
-*
-******************************************************************************/
- .section .isr_vector,"a",%progbits
- .type g_pfnVectors, %object
- .size g_pfnVectors, .-g_pfnVectors
-
-
-g_pfnVectors:
- .word _estack
- .word Reset_Handler
- .word NMI_Handler
- .word HardFault_Handler
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word SVC_Handler
- .word 0
- .word 0
- .word PendSV_Handler
- .word SysTick_Handler
- .word WWDG_IRQHandler /* Window WatchDog */
- .word 0 /* Reserved */
- .word RTC_IRQHandler /* RTC through the EXTI line */
- .word FLASH_IRQHandler /* FLASH */
- .word RCC_IRQHandler /* RCC */
- .word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
- .word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
- .word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
- .word 0 /* Reserved */
- .word DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */
- .word DMA1_Channel2_3_IRQHandler /* DMA1 Channel 2 and Channel 3 */
- .word DMA1_Channel4_5_IRQHandler /* DMA1 Channel 4 and Channel 5 */
- .word ADC1_IRQHandler /* ADC1 */
- .word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
- .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
- .word 0 /* Reserved */
- .word TIM3_IRQHandler /* TIM3 */
- .word TIM6_IRQHandler /* TIM6 */
- .word 0 /* Reserved */
- .word TIM14_IRQHandler /* TIM14 */
- .word TIM15_IRQHandler /* TIM15 */
- .word TIM16_IRQHandler /* TIM16 */
- .word TIM17_IRQHandler /* TIM17 */
- .word I2C1_IRQHandler /* I2C1 */
- .word I2C2_IRQHandler /* I2C2 */
- .word SPI1_IRQHandler /* SPI1 */
- .word SPI2_IRQHandler /* SPI2 */
- .word USART1_IRQHandler /* USART1 */
- .word USART2_IRQHandler /* USART2 */
- .word 0 /* Reserved */
- .word 0 /* Reserved */
- .word 0 /* Reserved */
-
-/*******************************************************************************
-*
-* Provide weak aliases for each Exception handler to the Default_Handler.
-* As they are weak aliases, any function with the same name will override
-* this definition.
-*
-*******************************************************************************/
-
- .weak NMI_Handler
- .thumb_set NMI_Handler,Default_Handler
-
- .weak HardFault_Handler
- .thumb_set HardFault_Handler,Default_Handler
-
- .weak SVC_Handler
- .thumb_set SVC_Handler,Default_Handler
-
- .weak PendSV_Handler
- .thumb_set PendSV_Handler,Default_Handler
-
- .weak SysTick_Handler
- .thumb_set SysTick_Handler,Default_Handler
-
- .weak WWDG_IRQHandler
- .thumb_set WWDG_IRQHandler,Default_Handler
-
- .weak RTC_IRQHandler
- .thumb_set RTC_IRQHandler,Default_Handler
-
- .weak FLASH_IRQHandler
- .thumb_set FLASH_IRQHandler,Default_Handler
-
- .weak RCC_IRQHandler
- .thumb_set RCC_IRQHandler,Default_Handler
-
- .weak EXTI0_1_IRQHandler
- .thumb_set EXTI0_1_IRQHandler,Default_Handler
-
- .weak EXTI2_3_IRQHandler
- .thumb_set EXTI2_3_IRQHandler,Default_Handler
-
- .weak EXTI4_15_IRQHandler
- .thumb_set EXTI4_15_IRQHandler,Default_Handler
-
- .weak DMA1_Channel1_IRQHandler
- .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
-
- .weak DMA1_Channel2_3_IRQHandler
- .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler
-
- .weak DMA1_Channel4_5_IRQHandler
- .thumb_set DMA1_Channel4_5_IRQHandler,Default_Handler
-
- .weak ADC1_IRQHandler
- .thumb_set ADC1_IRQHandler,Default_Handler
-
- .weak TIM1_BRK_UP_TRG_COM_IRQHandler
- .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
-
- .weak TIM1_CC_IRQHandler
- .thumb_set TIM1_CC_IRQHandler,Default_Handler
-
- .weak TIM3_IRQHandler
- .thumb_set TIM3_IRQHandler,Default_Handler
-
- .weak TIM6_IRQHandler
- .thumb_set TIM6_IRQHandler,Default_Handler
-
- .weak TIM14_IRQHandler
- .thumb_set TIM14_IRQHandler,Default_Handler
-
- .weak TIM15_IRQHandler
- .thumb_set TIM15_IRQHandler,Default_Handler
-
- .weak TIM16_IRQHandler
- .thumb_set TIM16_IRQHandler,Default_Handler
-
- .weak TIM17_IRQHandler
- .thumb_set TIM17_IRQHandler,Default_Handler
-
- .weak I2C1_IRQHandler
- .thumb_set I2C1_IRQHandler,Default_Handler
-
- .weak I2C2_IRQHandler
- .thumb_set I2C2_IRQHandler,Default_Handler
-
- .weak SPI1_IRQHandler
- .thumb_set SPI1_IRQHandler,Default_Handler
-
- .weak SPI2_IRQHandler
- .thumb_set SPI2_IRQHandler,Default_Handler
-
- .weak USART1_IRQHandler
- .thumb_set USART1_IRQHandler,Default_Handler
-
- .weak USART2_IRQHandler
- .thumb_set USART2_IRQHandler,Default_Handler
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
-
diff --git a/Blink/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f030xc.s b/Blink/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f030xc.s deleted file mode 100644 index 43b492d..0000000 --- a/Blink/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f030xc.s +++ /dev/null @@ -1,278 +0,0 @@ -/**
- ******************************************************************************
- * @file startup_stm32f030xc.s
- * @author MCD Application Team
- * @brief STM32F030xc/STM32F030xb devices vector table for GCC toolchain.
- * This module performs:
- * - Set the initial SP
- * - Set the initial PC == Reset_Handler,
- * - Set the vector table entries with the exceptions ISR address
- * - Branches to main in the C library (which eventually
- * calls main()).
- * After Reset the Cortex-M0 processor is in Thread mode,
- * priority is Privileged, and the Stack is set to Main.
- ******************************************************************************
- * @attention
- *
- * <h2><center>© Copyright (c) 2016 STMicroelectronics.
- * All rights reserved.</center></h2>
- *
- * This software component is licensed by ST under BSD 3-Clause license,
- * the "License"; You may not use this file except in compliance with the
- * License. You may obtain a copy of the License at:
- * opensource.org/licenses/BSD-3-Clause
- *
- ******************************************************************************
- */
-
- .syntax unified
- .cpu cortex-m0
- .fpu softvfp
- .thumb
-
-.global g_pfnVectors
-.global Default_Handler
-
-/* start address for the initialization values of the .data section.
-defined in linker script */
-.word _sidata
-/* start address for the .data section. defined in linker script */
-.word _sdata
-/* end address for the .data section. defined in linker script */
-.word _edata
-/* start address for the .bss section. defined in linker script */
-.word _sbss
-/* end address for the .bss section. defined in linker script */
-.word _ebss
-
- .section .text.Reset_Handler
- .weak Reset_Handler
- .type Reset_Handler, %function
-Reset_Handler:
- ldr r0, =_estack
- mov sp, r0 /* set stack pointer */
-
-/* Copy the data segment initializers from flash to SRAM */
- ldr r0, =_sdata
- ldr r1, =_edata
- ldr r2, =_sidata
- movs r3, #0
- b LoopCopyDataInit
-
-CopyDataInit:
- ldr r4, [r2, r3]
- str r4, [r0, r3]
- adds r3, r3, #4
-
-LoopCopyDataInit:
- adds r4, r0, r3
- cmp r4, r1
- bcc CopyDataInit
-
-/* Zero fill the bss segment. */
- ldr r2, =_sbss
- ldr r4, =_ebss
- movs r3, #0
- b LoopFillZerobss
-
-FillZerobss:
- str r3, [r2]
- adds r2, r2, #4
-
-LoopFillZerobss:
- cmp r2, r4
- bcc FillZerobss
-
-/* Call the clock system intitialization function.*/
- bl SystemInit
-/* Call static constructors */
- bl __libc_init_array
-/* Call the application's entry point.*/
- bl main
-
-LoopForever:
- b LoopForever
-
-
-.size Reset_Handler, .-Reset_Handler
-
-/**
- * @brief This is the code that gets called when the processor receives an
- * unexpected interrupt. This simply enters an infinite loop, preserving
- * the system state for examination by a debugger.
- *
- * @param None
- * @retval : None
-*/
- .section .text.Default_Handler,"ax",%progbits
-Default_Handler:
-Infinite_Loop:
- b Infinite_Loop
- .size Default_Handler, .-Default_Handler
-/******************************************************************************
-*
-* The minimal vector table for a Cortex M0. Note that the proper constructs
-* must be placed on this to ensure that it ends up at physical address
-* 0x0000.0000.
-*
-******************************************************************************/
- .section .isr_vector,"a",%progbits
- .type g_pfnVectors, %object
- .size g_pfnVectors, .-g_pfnVectors
-
-
-g_pfnVectors:
- .word _estack
- .word Reset_Handler
- .word NMI_Handler
- .word HardFault_Handler
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word SVC_Handler
- .word 0
- .word 0
- .word PendSV_Handler
- .word SysTick_Handler
- .word WWDG_IRQHandler /* Window WatchDog */
- .word 0 /* Reserved */
- .word RTC_IRQHandler /* RTC through the EXTI line */
- .word FLASH_IRQHandler /* FLASH */
- .word RCC_IRQHandler /* RCC */
- .word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
- .word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
- .word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
- .word 0 /* Reserved */
- .word DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */
- .word DMA1_Channel2_3_IRQHandler /* DMA1 Channel 2 and Channel 3 */
- .word DMA1_Channel4_5_IRQHandler /* DMA1 Channel 4 and Channel 5 */
- .word ADC1_IRQHandler /* ADC1 */
- .word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
- .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
- .word 0 /* Reserved */
- .word TIM3_IRQHandler /* TIM3 */
- .word TIM6_IRQHandler /* TIM6 */
- .word TIM7_IRQHandler /* TIM7 */
- .word TIM14_IRQHandler /* TIM14 */
- .word TIM15_IRQHandler /* TIM15 */
- .word TIM16_IRQHandler /* TIM16 */
- .word TIM17_IRQHandler /* TIM17 */
- .word I2C1_IRQHandler /* I2C1 */
- .word I2C2_IRQHandler /* I2C2 */
- .word SPI1_IRQHandler /* SPI1 */
- .word SPI2_IRQHandler /* SPI2 */
- .word USART1_IRQHandler /* USART1 */
- .word USART2_IRQHandler /* USART2 */
- .word USART3_6_IRQHandler /* USART3, USART4, USART5, USART6 */
- .word 0 /* Reserved */
-
-/*******************************************************************************
-*
-* Provide weak aliases for each Exception handler to the Default_Handler.
-* As they are weak aliases, any function with the same name will override
-* this definition.
-*
-*******************************************************************************/
-
- .weak NMI_Handler
- .thumb_set NMI_Handler,Default_Handler
-
- .weak HardFault_Handler
- .thumb_set HardFault_Handler,Default_Handler
-
- .weak SVC_Handler
- .thumb_set SVC_Handler,Default_Handler
-
- .weak PendSV_Handler
- .thumb_set PendSV_Handler,Default_Handler
-
- .weak SysTick_Handler
- .thumb_set SysTick_Handler,Default_Handler
-
- .weak WWDG_IRQHandler
- .thumb_set WWDG_IRQHandler,Default_Handler
-
- .weak RTC_IRQHandler
- .thumb_set RTC_IRQHandler,Default_Handler
-
- .weak FLASH_IRQHandler
- .thumb_set FLASH_IRQHandler,Default_Handler
-
- .weak RCC_IRQHandler
- .thumb_set RCC_IRQHandler,Default_Handler
-
- .weak EXTI0_1_IRQHandler
- .thumb_set EXTI0_1_IRQHandler,Default_Handler
-
- .weak EXTI2_3_IRQHandler
- .thumb_set EXTI2_3_IRQHandler,Default_Handler
-
- .weak EXTI4_15_IRQHandler
- .thumb_set EXTI4_15_IRQHandler,Default_Handler
-
- .weak DMA1_Channel1_IRQHandler
- .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
-
- .weak DMA1_Channel2_3_IRQHandler
- .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler
-
- .weak DMA1_Channel4_5_IRQHandler
- .thumb_set DMA1_Channel4_5_IRQHandler,Default_Handler
-
- .weak ADC1_IRQHandler
- .thumb_set ADC1_IRQHandler,Default_Handler
-
- .weak TIM1_BRK_UP_TRG_COM_IRQHandler
- .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
-
- .weak TIM1_CC_IRQHandler
- .thumb_set TIM1_CC_IRQHandler,Default_Handler
-
- .weak TIM3_IRQHandler
- .thumb_set TIM3_IRQHandler,Default_Handler
-
- .weak TIM6_IRQHandler
- .thumb_set TIM6_IRQHandler,Default_Handler
-
- .weak TIM7_IRQHandler
- .thumb_set TIM7_IRQHandler,Default_Handler
-
- .weak TIM14_IRQHandler
- .thumb_set TIM14_IRQHandler,Default_Handler
-
- .weak TIM15_IRQHandler
- .thumb_set TIM15_IRQHandler,Default_Handler
-
- .weak TIM16_IRQHandler
- .thumb_set TIM16_IRQHandler,Default_Handler
-
- .weak TIM17_IRQHandler
- .thumb_set TIM17_IRQHandler,Default_Handler
-
- .weak I2C1_IRQHandler
- .thumb_set I2C1_IRQHandler,Default_Handler
-
- .weak I2C2_IRQHandler
- .thumb_set I2C2_IRQHandler,Default_Handler
-
- .weak SPI1_IRQHandler
- .thumb_set SPI1_IRQHandler,Default_Handler
-
- .weak SPI2_IRQHandler
- .thumb_set SPI2_IRQHandler,Default_Handler
-
- .weak USART1_IRQHandler
- .thumb_set USART1_IRQHandler,Default_Handler
-
- .weak USART2_IRQHandler
- .thumb_set USART2_IRQHandler,Default_Handler
-
- .weak USART3_6_IRQHandler
- .thumb_set USART3_6_IRQHandler,Default_Handler
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
-
diff --git a/Blink/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f031x6.s b/Blink/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f031x6.s deleted file mode 100644 index 3d990f9..0000000 --- a/Blink/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f031x6.s +++ /dev/null @@ -1,264 +0,0 @@ -/**
- ******************************************************************************
- * @file startup_stm32f031x6.s
- * @author MCD Application Team
- * @brief STM32F031x4/STM32F031x6 devices vector table for GCC toolchain.
- * This module performs:
- * - Set the initial SP
- * - Set the initial PC == Reset_Handler,
- * - Set the vector table entries with the exceptions ISR address
- * - Branches to main in the C library (which eventually
- * calls main()).
- * After Reset the Cortex-M0 processor is in Thread mode,
- * priority is Privileged, and the Stack is set to Main.
- ******************************************************************************
- * @attention
- *
- * <h2><center>© Copyright (c) 2016 STMicroelectronics.
- * All rights reserved.</center></h2>
- *
- * This software component is licensed by ST under BSD 3-Clause license,
- * the "License"; You may not use this file except in compliance with the
- * License. You may obtain a copy of the License at:
- * opensource.org/licenses/BSD-3-Clause
- *
- ******************************************************************************
- */
-
- .syntax unified
- .cpu cortex-m0
- .fpu softvfp
- .thumb
-
-.global g_pfnVectors
-.global Default_Handler
-
-/* start address for the initialization values of the .data section.
-defined in linker script */
-.word _sidata
-/* start address for the .data section. defined in linker script */
-.word _sdata
-/* end address for the .data section. defined in linker script */
-.word _edata
-/* start address for the .bss section. defined in linker script */
-.word _sbss
-/* end address for the .bss section. defined in linker script */
-.word _ebss
-
- .section .text.Reset_Handler
- .weak Reset_Handler
- .type Reset_Handler, %function
-Reset_Handler:
- ldr r0, =_estack
- mov sp, r0 /* set stack pointer */
-
-/* Copy the data segment initializers from flash to SRAM */
- ldr r0, =_sdata
- ldr r1, =_edata
- ldr r2, =_sidata
- movs r3, #0
- b LoopCopyDataInit
-
-CopyDataInit:
- ldr r4, [r2, r3]
- str r4, [r0, r3]
- adds r3, r3, #4
-
-LoopCopyDataInit:
- adds r4, r0, r3
- cmp r4, r1
- bcc CopyDataInit
-
-/* Zero fill the bss segment. */
- ldr r2, =_sbss
- ldr r4, =_ebss
- movs r3, #0
- b LoopFillZerobss
-
-FillZerobss:
- str r3, [r2]
- adds r2, r2, #4
-
-LoopFillZerobss:
- cmp r2, r4
- bcc FillZerobss
-
-/* Call the clock system intitialization function.*/
- bl SystemInit
-/* Call static constructors */
- bl __libc_init_array
-/* Call the application's entry point.*/
- bl main
-
-LoopForever:
- b LoopForever
-
-
-.size Reset_Handler, .-Reset_Handler
-
-/**
- * @brief This is the code that gets called when the processor receives an
- * unexpected interrupt. This simply enters an infinite loop, preserving
- * the system state for examination by a debugger.
- *
- * @param None
- * @retval : None
-*/
- .section .text.Default_Handler,"ax",%progbits
-Default_Handler:
-Infinite_Loop:
- b Infinite_Loop
- .size Default_Handler, .-Default_Handler
-/******************************************************************************
-*
-* The minimal vector table for a Cortex M0. Note that the proper constructs
-* must be placed on this to ensure that it ends up at physical address
-* 0x0000.0000.
-*
-******************************************************************************/
- .section .isr_vector,"a",%progbits
- .type g_pfnVectors, %object
- .size g_pfnVectors, .-g_pfnVectors
-
-
-g_pfnVectors:
- .word _estack
- .word Reset_Handler
- .word NMI_Handler
- .word HardFault_Handler
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word SVC_Handler
- .word 0
- .word 0
- .word PendSV_Handler
- .word SysTick_Handler
- .word WWDG_IRQHandler /* Window WatchDog */
- .word PVD_IRQHandler /* PVD through EXTI Line detect */
- .word RTC_IRQHandler /* RTC through the EXTI line */
- .word FLASH_IRQHandler /* FLASH */
- .word RCC_IRQHandler /* RCC */
- .word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
- .word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
- .word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
- .word 0 /* Reserved */
- .word DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */
- .word DMA1_Channel2_3_IRQHandler /* DMA1 Channel 2 and Channel 3 */
- .word DMA1_Channel4_5_IRQHandler /* DMA1 Channel 4 and Channel 5 */
- .word ADC1_IRQHandler /* ADC1 */
- .word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
- .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
- .word TIM2_IRQHandler /* TIM2 */
- .word TIM3_IRQHandler /* TIM3 */
- .word 0 /* Reserved */
- .word 0 /* Reserved */
- .word TIM14_IRQHandler /* TIM14 */
- .word 0 /* Reserved */
- .word TIM16_IRQHandler /* TIM16 */
- .word TIM17_IRQHandler /* TIM17 */
- .word I2C1_IRQHandler /* I2C1 */
- .word 0 /* Reserved */
- .word SPI1_IRQHandler /* SPI1 */
- .word 0 /* Reserved */
- .word USART1_IRQHandler /* USART1 */
- .word 0 /* Reserved */
- .word 0 /* Reserved */
- .word 0 /* Reserved */
- .word 0 /* Reserved */
-
-/*******************************************************************************
-*
-* Provide weak aliases for each Exception handler to the Default_Handler.
-* As they are weak aliases, any function with the same name will override
-* this definition.
-*
-*******************************************************************************/
-
- .weak NMI_Handler
- .thumb_set NMI_Handler,Default_Handler
-
- .weak HardFault_Handler
- .thumb_set HardFault_Handler,Default_Handler
-
- .weak SVC_Handler
- .thumb_set SVC_Handler,Default_Handler
-
- .weak PendSV_Handler
- .thumb_set PendSV_Handler,Default_Handler
-
- .weak SysTick_Handler
- .thumb_set SysTick_Handler,Default_Handler
-
- .weak WWDG_IRQHandler
- .thumb_set WWDG_IRQHandler,Default_Handler
-
- .weak PVD_IRQHandler
- .thumb_set PVD_IRQHandler,Default_Handler
-
- .weak RTC_IRQHandler
- .thumb_set RTC_IRQHandler,Default_Handler
-
- .weak FLASH_IRQHandler
- .thumb_set FLASH_IRQHandler,Default_Handler
-
- .weak RCC_IRQHandler
- .thumb_set RCC_IRQHandler,Default_Handler
-
- .weak EXTI0_1_IRQHandler
- .thumb_set EXTI0_1_IRQHandler,Default_Handler
-
- .weak EXTI2_3_IRQHandler
- .thumb_set EXTI2_3_IRQHandler,Default_Handler
-
- .weak EXTI4_15_IRQHandler
- .thumb_set EXTI4_15_IRQHandler,Default_Handler
-
- .weak DMA1_Channel1_IRQHandler
- .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
-
- .weak DMA1_Channel2_3_IRQHandler
- .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler
-
- .weak DMA1_Channel4_5_IRQHandler
- .thumb_set DMA1_Channel4_5_IRQHandler,Default_Handler
-
- .weak ADC1_IRQHandler
- .thumb_set ADC1_IRQHandler,Default_Handler
-
- .weak TIM1_BRK_UP_TRG_COM_IRQHandler
- .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
-
- .weak TIM1_CC_IRQHandler
- .thumb_set TIM1_CC_IRQHandler,Default_Handler
-
- .weak TIM2_IRQHandler
- .thumb_set TIM2_IRQHandler,Default_Handler
-
- .weak TIM3_IRQHandler
- .thumb_set TIM3_IRQHandler,Default_Handler
-
- .weak TIM14_IRQHandler
- .thumb_set TIM14_IRQHandler,Default_Handler
-
- .weak TIM16_IRQHandler
- .thumb_set TIM16_IRQHandler,Default_Handler
-
- .weak TIM17_IRQHandler
- .thumb_set TIM17_IRQHandler,Default_Handler
-
- .weak I2C1_IRQHandler
- .thumb_set I2C1_IRQHandler,Default_Handler
-
- .weak SPI1_IRQHandler
- .thumb_set SPI1_IRQHandler,Default_Handler
-
- .weak USART1_IRQHandler
- .thumb_set USART1_IRQHandler,Default_Handler
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
-
diff --git a/Blink/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f038xx.s b/Blink/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f038xx.s deleted file mode 100644 index 5059094..0000000 --- a/Blink/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f038xx.s +++ /dev/null @@ -1,261 +0,0 @@ -/**
- ******************************************************************************
- * @file startup_stm32f038xx.s
- * @author MCD Application Team
- * @brief STM32F038xx devices vector table for GCC toolchain.
- * This module performs:
- * - Set the initial SP
- * - Set the initial PC == Reset_Handler,
- * - Set the vector table entries with the exceptions ISR address
- * - Branches to main in the C library (which eventually
- * calls main()).
- * After Reset the Cortex-M0 processor is in Thread mode,
- * priority is Privileged, and the Stack is set to Main.
- ******************************************************************************
- * @attention
- *
- * <h2><center>© Copyright (c) 2016 STMicroelectronics.
- * All rights reserved.</center></h2>
- *
- * This software component is licensed by ST under BSD 3-Clause license,
- * the "License"; You may not use this file except in compliance with the
- * License. You may obtain a copy of the License at:
- * opensource.org/licenses/BSD-3-Clause
- *
- ******************************************************************************
- */
-
- .syntax unified
- .cpu cortex-m0
- .fpu softvfp
- .thumb
-
-.global g_pfnVectors
-.global Default_Handler
-
-/* start address for the initialization values of the .data section.
-defined in linker script */
-.word _sidata
-/* start address for the .data section. defined in linker script */
-.word _sdata
-/* end address for the .data section. defined in linker script */
-.word _edata
-/* start address for the .bss section. defined in linker script */
-.word _sbss
-/* end address for the .bss section. defined in linker script */
-.word _ebss
-
- .section .text.Reset_Handler
- .weak Reset_Handler
- .type Reset_Handler, %function
-Reset_Handler:
- ldr r0, =_estack
- mov sp, r0 /* set stack pointer */
-
-/* Copy the data segment initializers from flash to SRAM */
- ldr r0, =_sdata
- ldr r1, =_edata
- ldr r2, =_sidata
- movs r3, #0
- b LoopCopyDataInit
-
-CopyDataInit:
- ldr r4, [r2, r3]
- str r4, [r0, r3]
- adds r3, r3, #4
-
-LoopCopyDataInit:
- adds r4, r0, r3
- cmp r4, r1
- bcc CopyDataInit
-
-/* Zero fill the bss segment. */
- ldr r2, =_sbss
- ldr r4, =_ebss
- movs r3, #0
- b LoopFillZerobss
-
-FillZerobss:
- str r3, [r2]
- adds r2, r2, #4
-
-LoopFillZerobss:
- cmp r2, r4
- bcc FillZerobss
-
-/* Call the clock system intitialization function.*/
- bl SystemInit
-/* Call static constructors */
- bl __libc_init_array
-/* Call the application's entry point.*/
- bl main
-
-LoopForever:
- b LoopForever
-
-
-.size Reset_Handler, .-Reset_Handler
-
-/**
- * @brief This is the code that gets called when the processor receives an
- * unexpected interrupt. This simply enters an infinite loop, preserving
- * the system state for examination by a debugger.
- *
- * @param None
- * @retval : None
-*/
- .section .text.Default_Handler,"ax",%progbits
-Default_Handler:
-Infinite_Loop:
- b Infinite_Loop
- .size Default_Handler, .-Default_Handler
-/******************************************************************************
-*
-* The minimal vector table for a Cortex M0. Note that the proper constructs
-* must be placed on this to ensure that it ends up at physical address
-* 0x0000.0000.
-*
-******************************************************************************/
- .section .isr_vector,"a",%progbits
- .type g_pfnVectors, %object
- .size g_pfnVectors, .-g_pfnVectors
-
-
-g_pfnVectors:
- .word _estack
- .word Reset_Handler
- .word NMI_Handler
- .word HardFault_Handler
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word SVC_Handler
- .word 0
- .word 0
- .word PendSV_Handler
- .word SysTick_Handler
- .word WWDG_IRQHandler /* Window WatchDog */
- .word 0 /* Reserved */
- .word RTC_IRQHandler /* RTC through the EXTI line */
- .word FLASH_IRQHandler /* FLASH */
- .word RCC_IRQHandler /* RCC */
- .word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
- .word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
- .word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
- .word 0 /* Reserved */
- .word DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */
- .word DMA1_Channel2_3_IRQHandler /* DMA1 Channel 2 and Channel 3 */
- .word DMA1_Channel4_5_IRQHandler /* DMA1 Channel 4 and Channel 5 */
- .word ADC1_IRQHandler /* ADC1 */
- .word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
- .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
- .word TIM2_IRQHandler /* TIM2 */
- .word TIM3_IRQHandler /* TIM3 */
- .word 0 /* Reserved */
- .word 0 /* Reserved */
- .word TIM14_IRQHandler /* TIM14 */
- .word 0 /* Reserved */
- .word TIM16_IRQHandler /* TIM16 */
- .word TIM17_IRQHandler /* TIM17 */
- .word I2C1_IRQHandler /* I2C1 */
- .word 0 /* Reserved */
- .word SPI1_IRQHandler /* SPI1 */
- .word 0 /* Reserved */
- .word USART1_IRQHandler /* USART1 */
- .word 0 /* Reserved */
- .word 0 /* Reserved */
- .word 0 /* Reserved */
- .word 0 /* Reserved */
-
-/*******************************************************************************
-*
-* Provide weak aliases for each Exception handler to the Default_Handler.
-* As they are weak aliases, any function with the same name will override
-* this definition.
-*
-*******************************************************************************/
-
- .weak NMI_Handler
- .thumb_set NMI_Handler,Default_Handler
-
- .weak HardFault_Handler
- .thumb_set HardFault_Handler,Default_Handler
-
- .weak SVC_Handler
- .thumb_set SVC_Handler,Default_Handler
-
- .weak PendSV_Handler
- .thumb_set PendSV_Handler,Default_Handler
-
- .weak SysTick_Handler
- .thumb_set SysTick_Handler,Default_Handler
-
- .weak WWDG_IRQHandler
- .thumb_set WWDG_IRQHandler,Default_Handler
-
- .weak RTC_IRQHandler
- .thumb_set RTC_IRQHandler,Default_Handler
-
- .weak FLASH_IRQHandler
- .thumb_set FLASH_IRQHandler,Default_Handler
-
- .weak RCC_IRQHandler
- .thumb_set RCC_IRQHandler,Default_Handler
-
- .weak EXTI0_1_IRQHandler
- .thumb_set EXTI0_1_IRQHandler,Default_Handler
-
- .weak EXTI2_3_IRQHandler
- .thumb_set EXTI2_3_IRQHandler,Default_Handler
-
- .weak EXTI4_15_IRQHandler
- .thumb_set EXTI4_15_IRQHandler,Default_Handler
-
- .weak DMA1_Channel1_IRQHandler
- .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
-
- .weak DMA1_Channel2_3_IRQHandler
- .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler
-
- .weak DMA1_Channel4_5_IRQHandler
- .thumb_set DMA1_Channel4_5_IRQHandler,Default_Handler
-
- .weak ADC1_IRQHandler
- .thumb_set ADC1_IRQHandler,Default_Handler
-
- .weak TIM1_BRK_UP_TRG_COM_IRQHandler
- .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
-
- .weak TIM1_CC_IRQHandler
- .thumb_set TIM1_CC_IRQHandler,Default_Handler
-
- .weak TIM2_IRQHandler
- .thumb_set TIM2_IRQHandler,Default_Handler
-
- .weak TIM3_IRQHandler
- .thumb_set TIM3_IRQHandler,Default_Handler
-
- .weak TIM14_IRQHandler
- .thumb_set TIM14_IRQHandler,Default_Handler
-
- .weak TIM16_IRQHandler
- .thumb_set TIM16_IRQHandler,Default_Handler
-
- .weak TIM17_IRQHandler
- .thumb_set TIM17_IRQHandler,Default_Handler
-
- .weak I2C1_IRQHandler
- .thumb_set I2C1_IRQHandler,Default_Handler
-
- .weak SPI1_IRQHandler
- .thumb_set SPI1_IRQHandler,Default_Handler
-
- .weak USART1_IRQHandler
- .thumb_set USART1_IRQHandler,Default_Handler
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
-
diff --git a/Blink/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f042x6.s b/Blink/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f042x6.s deleted file mode 100644 index 2f80631..0000000 --- a/Blink/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f042x6.s +++ /dev/null @@ -1,309 +0,0 @@ -/**
- ******************************************************************************
- * @file startup_stm32f042x6.s
- * @author MCD Application Team
- * @brief STM32F042x4/STM32F042x6 devices vector table for GCC toolchain.
- * This module performs:
- * - Set the initial SP
- * - Set the initial PC == Reset_Handler,
- * - Set the vector table entries with the exceptions ISR address
- * - Branches to main in the C library (which eventually
- * calls main()).
- * After Reset the Cortex-M0 processor is in Thread mode,
- * priority is Privileged, and the Stack is set to Main.
- ******************************************************************************
- * @attention
- *
- * <h2><center>© Copyright (c) 2016 STMicroelectronics.
- * All rights reserved.</center></h2>
- *
- * This software component is licensed by ST under BSD 3-Clause license,
- * the "License"; You may not use this file except in compliance with the
- * License. You may obtain a copy of the License at:
- * opensource.org/licenses/BSD-3-Clause
- *
- ******************************************************************************
- */
-
- .syntax unified
- .cpu cortex-m0
- .fpu softvfp
- .thumb
-
-.global g_pfnVectors
-.global Default_Handler
-
-/* start address for the initialization values of the .data section.
-defined in linker script */
-.word _sidata
-/* start address for the .data section. defined in linker script */
-.word _sdata
-/* end address for the .data section. defined in linker script */
-.word _edata
-/* start address for the .bss section. defined in linker script */
-.word _sbss
-/* end address for the .bss section. defined in linker script */
-.word _ebss
-
-/**
- * @brief This is the code that gets called when the processor first
- * starts execution following a reset event. Only the absolutely
- * necessary set is performed, after which the application
- * supplied main() routine is called.
- * @param None
- * @retval : None
-*/
-
- .section .text.Reset_Handler
- .weak Reset_Handler
- .type Reset_Handler, %function
-Reset_Handler:
- ldr r0, =_estack
- mov sp, r0 /* set stack pointer */
-
-/*Check if boot space corresponds to test memory*/
-
- LDR R0,=0x00000004
- LDR R1, [R0]
- LSRS R1, R1, #24
- LDR R2,=0x1F
- CMP R1, R2
- BNE ApplicationStart
-
- /*SYSCFG clock enable*/
-
- LDR R0,=0x40021018
- LDR R1,=0x00000001
- STR R1, [R0]
-
-/*Set CFGR1 register with flash memory remap at address 0*/
- LDR R0,=0x40010000
- LDR R1,=0x00000000
- STR R1, [R0]
-
-ApplicationStart:
-/* Copy the data segment initializers from flash to SRAM */
- ldr r0, =_sdata
- ldr r1, =_edata
- ldr r2, =_sidata
- movs r3, #0
- b LoopCopyDataInit
-
-CopyDataInit:
- ldr r4, [r2, r3]
- str r4, [r0, r3]
- adds r3, r3, #4
-
-LoopCopyDataInit:
- adds r4, r0, r3
- cmp r4, r1
- bcc CopyDataInit
-
-/* Zero fill the bss segment. */
- ldr r2, =_sbss
- ldr r4, =_ebss
- movs r3, #0
- b LoopFillZerobss
-
-FillZerobss:
- str r3, [r2]
- adds r2, r2, #4
-
-LoopFillZerobss:
- cmp r2, r4
- bcc FillZerobss
-
-/* Call the clock system intitialization function.*/
- bl SystemInit
-/* Call static constructors */
- bl __libc_init_array
-/* Call the application's entry point.*/
- bl main
-
-LoopForever:
- b LoopForever
-
-
-.size Reset_Handler, .-Reset_Handler
-
-/**
- * @brief This is the code that gets called when the processor receives an
- * unexpected interrupt. This simply enters an infinite loop, preserving
- * the system state for examination by a debugger.
- *
- * @param None
- * @retval : None
-*/
- .section .text.Default_Handler,"ax",%progbits
-Default_Handler:
-Infinite_Loop:
- b Infinite_Loop
- .size Default_Handler, .-Default_Handler
-/******************************************************************************
-*
-* The minimal vector table for a Cortex M0. Note that the proper constructs
-* must be placed on this to ensure that it ends up at physical address
-* 0x0000.0000.
-*
-******************************************************************************/
- .section .isr_vector,"a",%progbits
- .type g_pfnVectors, %object
- .size g_pfnVectors, .-g_pfnVectors
-
-
-g_pfnVectors:
- .word _estack
- .word Reset_Handler
- .word NMI_Handler
- .word HardFault_Handler
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word SVC_Handler
- .word 0
- .word 0
- .word PendSV_Handler
- .word SysTick_Handler
- .word WWDG_IRQHandler /* Window WatchDog */
- .word PVD_VDDIO2_IRQHandler /* PVD and VDDIO2 through EXTI Line detect */
- .word RTC_IRQHandler /* RTC through the EXTI line */
- .word FLASH_IRQHandler /* FLASH */
- .word RCC_CRS_IRQHandler /* RCC and CRS */
- .word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
- .word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
- .word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
- .word TSC_IRQHandler /* TSC */
- .word DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */
- .word DMA1_Channel2_3_IRQHandler /* DMA1 Channel 2 and Channel 3 */
- .word DMA1_Channel4_5_IRQHandler /* DMA1 Channel 4 and Channel 5 */
- .word ADC1_IRQHandler /* ADC1 */
- .word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
- .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
- .word TIM2_IRQHandler /* TIM2 */
- .word TIM3_IRQHandler /* TIM3 */
- .word 0 /* Reserved */
- .word 0 /* Reserved */
- .word TIM14_IRQHandler /* TIM14 */
- .word 0 /* Reserved */
- .word TIM16_IRQHandler /* TIM16 */
- .word TIM17_IRQHandler /* TIM17 */
- .word I2C1_IRQHandler /* I2C1 */
- .word 0 /* Reserved */
- .word SPI1_IRQHandler /* SPI1 */
- .word SPI2_IRQHandler /* SPI2 */
- .word USART1_IRQHandler /* USART1 */
- .word USART2_IRQHandler /* USART2 */
- .word 0 /* Reserved */
- .word CEC_CAN_IRQHandler /* CEC and CAN */
- .word USB_IRQHandler /* USB */
-
-/*******************************************************************************
-*
-* Provide weak aliases for each Exception handler to the Default_Handler.
-* As they are weak aliases, any function with the same name will override
-* this definition.
-*
-*******************************************************************************/
-
- .weak NMI_Handler
- .thumb_set NMI_Handler,Default_Handler
-
- .weak HardFault_Handler
- .thumb_set HardFault_Handler,Default_Handler
-
- .weak SVC_Handler
- .thumb_set SVC_Handler,Default_Handler
-
- .weak PendSV_Handler
- .thumb_set PendSV_Handler,Default_Handler
-
- .weak SysTick_Handler
- .thumb_set SysTick_Handler,Default_Handler
-
- .weak WWDG_IRQHandler
- .thumb_set WWDG_IRQHandler,Default_Handler
-
- .weak PVD_VDDIO2_IRQHandler
- .thumb_set PVD_VDDIO2_IRQHandler,Default_Handler
-
- .weak RTC_IRQHandler
- .thumb_set RTC_IRQHandler,Default_Handler
-
- .weak FLASH_IRQHandler
- .thumb_set FLASH_IRQHandler,Default_Handler
-
- .weak RCC_CRS_IRQHandler
- .thumb_set RCC_CRS_IRQHandler,Default_Handler
-
- .weak EXTI0_1_IRQHandler
- .thumb_set EXTI0_1_IRQHandler,Default_Handler
-
- .weak EXTI2_3_IRQHandler
- .thumb_set EXTI2_3_IRQHandler,Default_Handler
-
- .weak EXTI4_15_IRQHandler
- .thumb_set EXTI4_15_IRQHandler,Default_Handler
-
- .weak TSC_IRQHandler
- .thumb_set TSC_IRQHandler,Default_Handler
-
- .weak DMA1_Channel1_IRQHandler
- .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
-
- .weak DMA1_Channel2_3_IRQHandler
- .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler
-
- .weak DMA1_Channel4_5_IRQHandler
- .thumb_set DMA1_Channel4_5_IRQHandler,Default_Handler
-
- .weak ADC1_IRQHandler
- .thumb_set ADC1_IRQHandler,Default_Handler
-
- .weak TIM1_BRK_UP_TRG_COM_IRQHandler
- .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
-
- .weak TIM1_CC_IRQHandler
- .thumb_set TIM1_CC_IRQHandler,Default_Handler
-
- .weak TIM2_IRQHandler
- .thumb_set TIM2_IRQHandler,Default_Handler
-
- .weak TIM3_IRQHandler
- .thumb_set TIM3_IRQHandler,Default_Handler
-
- .weak TIM14_IRQHandler
- .thumb_set TIM14_IRQHandler,Default_Handler
-
- .weak TIM16_IRQHandler
- .thumb_set TIM16_IRQHandler,Default_Handler
-
- .weak TIM17_IRQHandler
- .thumb_set TIM17_IRQHandler,Default_Handler
-
- .weak I2C1_IRQHandler
- .thumb_set I2C1_IRQHandler,Default_Handler
-
- .weak SPI1_IRQHandler
- .thumb_set SPI1_IRQHandler,Default_Handler
-
- .weak SPI2_IRQHandler
- .thumb_set SPI2_IRQHandler,Default_Handler
-
- .weak USART1_IRQHandler
- .thumb_set USART1_IRQHandler,Default_Handler
-
- .weak USART2_IRQHandler
- .thumb_set USART2_IRQHandler,Default_Handler
-
- .weak CEC_CAN_IRQHandler
- .thumb_set CEC_CAN_IRQHandler,Default_Handler
-
- .weak USB_IRQHandler
- .thumb_set USB_IRQHandler,Default_Handler
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
-
diff --git a/Blink/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f048xx.s b/Blink/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f048xx.s deleted file mode 100644 index b0c04f1..0000000 --- a/Blink/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f048xx.s +++ /dev/null @@ -1,279 +0,0 @@ -/**
- ******************************************************************************
- * @file startup_stm32f048xx.s
- * @author MCD Application Team
- * @brief STM32F048xx devices vector table for GCC toolchain.
- * This module performs:
- * - Set the initial SP
- * - Set the initial PC == Reset_Handler,
- * - Set the vector table entries with the exceptions ISR address
- * - Branches to main in the C library (which eventually
- * calls main()).
- * After Reset the Cortex-M0 processor is in Thread mode,
- * priority is Privileged, and the Stack is set to Main.
- ******************************************************************************
- * @attention
- *
- * <h2><center>© Copyright (c) 2016 STMicroelectronics.
- * All rights reserved.</center></h2>
- *
- * This software component is licensed by ST under BSD 3-Clause license,
- * the "License"; You may not use this file except in compliance with the
- * License. You may obtain a copy of the License at:
- * opensource.org/licenses/BSD-3-Clause
- *
- ******************************************************************************
- */
-
- .syntax unified
- .cpu cortex-m0
- .fpu softvfp
- .thumb
-
-.global g_pfnVectors
-.global Default_Handler
-
-/* start address for the initialization values of the .data section.
-defined in linker script */
-.word _sidata
-/* start address for the .data section. defined in linker script */
-.word _sdata
-/* end address for the .data section. defined in linker script */
-.word _edata
-/* start address for the .bss section. defined in linker script */
-.word _sbss
-/* end address for the .bss section. defined in linker script */
-.word _ebss
-
- .section .text.Reset_Handler
- .weak Reset_Handler
- .type Reset_Handler, %function
-Reset_Handler:
- ldr r0, =_estack
- mov sp, r0 /* set stack pointer */
-
-/* Copy the data segment initializers from flash to SRAM */
- ldr r0, =_sdata
- ldr r1, =_edata
- ldr r2, =_sidata
- movs r3, #0
- b LoopCopyDataInit
-
-CopyDataInit:
- ldr r4, [r2, r3]
- str r4, [r0, r3]
- adds r3, r3, #4
-
-LoopCopyDataInit:
- adds r4, r0, r3
- cmp r4, r1
- bcc CopyDataInit
-
-/* Zero fill the bss segment. */
- ldr r2, =_sbss
- ldr r4, =_ebss
- movs r3, #0
- b LoopFillZerobss
-
-FillZerobss:
- str r3, [r2]
- adds r2, r2, #4
-
-LoopFillZerobss:
- cmp r2, r4
- bcc FillZerobss
-
-/* Call the clock system intitialization function.*/
- bl SystemInit
-/* Call static constructors */
- bl __libc_init_array
-/* Call the application's entry point.*/
- bl main
-
-LoopForever:
- b LoopForever
-
-
-.size Reset_Handler, .-Reset_Handler
-
-/**
- * @brief This is the code that gets called when the processor receives an
- * unexpected interrupt. This simply enters an infinite loop, preserving
- * the system state for examination by a debugger.
- *
- * @param None
- * @retval : None
-*/
- .section .text.Default_Handler,"ax",%progbits
-Default_Handler:
-Infinite_Loop:
- b Infinite_Loop
- .size Default_Handler, .-Default_Handler
-/******************************************************************************
-*
-* The minimal vector table for a Cortex M0. Note that the proper constructs
-* must be placed on this to ensure that it ends up at physical address
-* 0x0000.0000.
-*
-******************************************************************************/
- .section .isr_vector,"a",%progbits
- .type g_pfnVectors, %object
- .size g_pfnVectors, .-g_pfnVectors
-
-
-g_pfnVectors:
- .word _estack
- .word Reset_Handler
- .word NMI_Handler
- .word HardFault_Handler
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word SVC_Handler
- .word 0
- .word 0
- .word PendSV_Handler
- .word SysTick_Handler
- .word WWDG_IRQHandler /* Window WatchDog */
- .word VDDIO2_IRQHandler /* VDDIO2 Monitor through EXTI Line 31 */
- .word RTC_IRQHandler /* RTC through the EXTI line */
- .word FLASH_IRQHandler /* FLASH */
- .word RCC_CRS_IRQHandler /* RCC and CRS */
- .word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
- .word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
- .word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
- .word TSC_IRQHandler /* TSC */
- .word DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */
- .word DMA1_Channel2_3_IRQHandler /* DMA1 Channel 2 and Channel 3 */
- .word DMA1_Channel4_5_IRQHandler /* DMA1 Channel 4 and Channel 5 */
- .word ADC1_IRQHandler /* ADC1 */
- .word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
- .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
- .word TIM2_IRQHandler /* TIM2 */
- .word TIM3_IRQHandler /* TIM3 */
- .word 0 /* Reserved */
- .word 0 /* Reserved */
- .word TIM14_IRQHandler /* TIM14 */
- .word 0 /* Reserved */
- .word TIM16_IRQHandler /* TIM16 */
- .word TIM17_IRQHandler /* TIM17 */
- .word I2C1_IRQHandler /* I2C1 */
- .word 0 /* Reserved */
- .word SPI1_IRQHandler /* SPI1 */
- .word SPI2_IRQHandler /* SPI2 */
- .word USART1_IRQHandler /* USART1 */
- .word USART2_IRQHandler /* USART2 */
- .word 0 /* Reserved */
- .word CEC_CAN_IRQHandler /* CEC and CAN */
- .word USB_IRQHandler /* USB */
-
-/*******************************************************************************
-*
-* Provide weak aliases for each Exception handler to the Default_Handler.
-* As they are weak aliases, any function with the same name will override
-* this definition.
-*
-*******************************************************************************/
-
- .weak NMI_Handler
- .thumb_set NMI_Handler,Default_Handler
-
- .weak HardFault_Handler
- .thumb_set HardFault_Handler,Default_Handler
-
- .weak SVC_Handler
- .thumb_set SVC_Handler,Default_Handler
-
- .weak PendSV_Handler
- .thumb_set PendSV_Handler,Default_Handler
-
- .weak SysTick_Handler
- .thumb_set SysTick_Handler,Default_Handler
-
- .weak WWDG_IRQHandler
- .thumb_set WWDG_IRQHandler,Default_Handler
-
- .weak VDDIO2_IRQHandler
- .thumb_set VDDIO2_IRQHandler,Default_Handler
-
- .weak RTC_IRQHandler
- .thumb_set RTC_IRQHandler,Default_Handler
-
- .weak FLASH_IRQHandler
- .thumb_set FLASH_IRQHandler,Default_Handler
-
- .weak RCC_CRS_IRQHandler
- .thumb_set RCC_CRS_IRQHandler,Default_Handler
-
- .weak EXTI0_1_IRQHandler
- .thumb_set EXTI0_1_IRQHandler,Default_Handler
-
- .weak EXTI2_3_IRQHandler
- .thumb_set EXTI2_3_IRQHandler,Default_Handler
-
- .weak EXTI4_15_IRQHandler
- .thumb_set EXTI4_15_IRQHandler,Default_Handler
-
- .weak TSC_IRQHandler
- .thumb_set TSC_IRQHandler,Default_Handler
-
- .weak DMA1_Channel1_IRQHandler
- .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
-
- .weak DMA1_Channel2_3_IRQHandler
- .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler
-
- .weak DMA1_Channel4_5_IRQHandler
- .thumb_set DMA1_Channel4_5_IRQHandler,Default_Handler
-
- .weak ADC1_IRQHandler
- .thumb_set ADC1_IRQHandler,Default_Handler
-
- .weak TIM1_BRK_UP_TRG_COM_IRQHandler
- .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
-
- .weak TIM1_CC_IRQHandler
- .thumb_set TIM1_CC_IRQHandler,Default_Handler
-
- .weak TIM2_IRQHandler
- .thumb_set TIM2_IRQHandler,Default_Handler
-
- .weak TIM3_IRQHandler
- .thumb_set TIM3_IRQHandler,Default_Handler
-
- .weak TIM14_IRQHandler
- .thumb_set TIM14_IRQHandler,Default_Handler
-
- .weak TIM16_IRQHandler
- .thumb_set TIM16_IRQHandler,Default_Handler
-
- .weak TIM17_IRQHandler
- .thumb_set TIM17_IRQHandler,Default_Handler
-
- .weak I2C1_IRQHandler
- .thumb_set I2C1_IRQHandler,Default_Handler
-
- .weak SPI1_IRQHandler
- .thumb_set SPI1_IRQHandler,Default_Handler
-
- .weak SPI2_IRQHandler
- .thumb_set SPI2_IRQHandler,Default_Handler
-
- .weak USART1_IRQHandler
- .thumb_set USART1_IRQHandler,Default_Handler
-
- .weak USART2_IRQHandler
- .thumb_set USART2_IRQHandler,Default_Handler
-
- .weak CEC_CAN_IRQHandler
- .thumb_set CEC_CAN_IRQHandler,Default_Handler
-
- .weak USB_IRQHandler
- .thumb_set USB_IRQHandler,Default_Handler
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
-
diff --git a/Blink/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f051x8.s b/Blink/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f051x8.s deleted file mode 100644 index 2df2759..0000000 --- a/Blink/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f051x8.s +++ /dev/null @@ -1,285 +0,0 @@ -/**
- ******************************************************************************
- * @file startup_stm32f051x8.s
- * @author MCD Application Team
- * @brief STM32F051x4/STM32F051x6/STM32F051x8 devices vector table for GCC toolchain.
- * This module performs:
- * - Set the initial SP
- * - Set the initial PC == Reset_Handler,
- * - Set the vector table entries with the exceptions ISR address
- * - Branches to main in the C library (which eventually
- * calls main()).
- * After Reset the Cortex-M0 processor is in Thread mode,
- * priority is Privileged, and the Stack is set to Main.
- ******************************************************************************
- * @attention
- *
- * <h2><center>© Copyright (c) 2016 STMicroelectronics.
- * All rights reserved.</center></h2>
- *
- * This software component is licensed by ST under BSD 3-Clause license,
- * the "License"; You may not use this file except in compliance with the
- * License. You may obtain a copy of the License at:
- * opensource.org/licenses/BSD-3-Clause
- *
- ******************************************************************************
- */
-
- .syntax unified
- .cpu cortex-m0
- .fpu softvfp
- .thumb
-
-.global g_pfnVectors
-.global Default_Handler
-
-/* start address for the initialization values of the .data section.
-defined in linker script */
-.word _sidata
-/* start address for the .data section. defined in linker script */
-.word _sdata
-/* end address for the .data section. defined in linker script */
-.word _edata
-/* start address for the .bss section. defined in linker script */
-.word _sbss
-/* end address for the .bss section. defined in linker script */
-.word _ebss
-
- .section .text.Reset_Handler
- .weak Reset_Handler
- .type Reset_Handler, %function
-Reset_Handler:
- ldr r0, =_estack
- mov sp, r0 /* set stack pointer */
-
-/* Copy the data segment initializers from flash to SRAM */
- ldr r0, =_sdata
- ldr r1, =_edata
- ldr r2, =_sidata
- movs r3, #0
- b LoopCopyDataInit
-
-CopyDataInit:
- ldr r4, [r2, r3]
- str r4, [r0, r3]
- adds r3, r3, #4
-
-LoopCopyDataInit:
- adds r4, r0, r3
- cmp r4, r1
- bcc CopyDataInit
-
-/* Zero fill the bss segment. */
- ldr r2, =_sbss
- ldr r4, =_ebss
- movs r3, #0
- b LoopFillZerobss
-
-FillZerobss:
- str r3, [r2]
- adds r2, r2, #4
-
-LoopFillZerobss:
- cmp r2, r4
- bcc FillZerobss
-
-/* Call the clock system intitialization function.*/
- bl SystemInit
-/* Call static constructors */
- bl __libc_init_array
-/* Call the application's entry point.*/
- bl main
-
-LoopForever:
- b LoopForever
-
-
-.size Reset_Handler, .-Reset_Handler
-
-/**
- * @brief This is the code that gets called when the processor receives an
- * unexpected interrupt. This simply enters an infinite loop, preserving
- * the system state for examination by a debugger.
- *
- * @param None
- * @retval : None
-*/
- .section .text.Default_Handler,"ax",%progbits
-Default_Handler:
-Infinite_Loop:
- b Infinite_Loop
- .size Default_Handler, .-Default_Handler
-/******************************************************************************
-*
-* The minimal vector table for a Cortex M0. Note that the proper constructs
-* must be placed on this to ensure that it ends up at physical address
-* 0x0000.0000.
-*
-******************************************************************************/
- .section .isr_vector,"a",%progbits
- .type g_pfnVectors, %object
- .size g_pfnVectors, .-g_pfnVectors
-
-
-g_pfnVectors:
- .word _estack
- .word Reset_Handler
- .word NMI_Handler
- .word HardFault_Handler
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word SVC_Handler
- .word 0
- .word 0
- .word PendSV_Handler
- .word SysTick_Handler
- .word WWDG_IRQHandler /* Window WatchDog */
- .word PVD_IRQHandler /* PVD through EXTI Line detect */
- .word RTC_IRQHandler /* RTC through the EXTI line */
- .word FLASH_IRQHandler /* FLASH */
- .word RCC_CRS_IRQHandler /* RCC and CRS */
- .word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
- .word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
- .word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
- .word TSC_IRQHandler /* TSC */
- .word DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */
- .word DMA1_Channel2_3_IRQHandler /* DMA1 Channel 2 and Channel 3 */
- .word DMA1_Channel4_5_IRQHandler /* DMA1 Channel 4 and Channel 5 */
- .word ADC1_COMP_IRQHandler /* ADC1, COMP1 and COMP2 */
- .word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
- .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
- .word TIM2_IRQHandler /* TIM2 */
- .word TIM3_IRQHandler /* TIM3 */
- .word TIM6_DAC_IRQHandler /* TIM6 and DAC */
- .word 0 /* Reserved */
- .word TIM14_IRQHandler /* TIM14 */
- .word TIM15_IRQHandler /* TIM15 */
- .word TIM16_IRQHandler /* TIM16 */
- .word TIM17_IRQHandler /* TIM17 */
- .word I2C1_IRQHandler /* I2C1 */
- .word I2C2_IRQHandler /* I2C2 */
- .word SPI1_IRQHandler /* SPI1 */
- .word SPI2_IRQHandler /* SPI2 */
- .word USART1_IRQHandler /* USART1 */
- .word USART2_IRQHandler /* USART2 */
- .word 0 /* Reserved */
- .word CEC_CAN_IRQHandler /* CEC and CAN */
- .word 0 /* Reserved */
-
-/*******************************************************************************
-*
-* Provide weak aliases for each Exception handler to the Default_Handler.
-* As they are weak aliases, any function with the same name will override
-* this definition.
-*
-*******************************************************************************/
-
- .weak NMI_Handler
- .thumb_set NMI_Handler,Default_Handler
-
- .weak HardFault_Handler
- .thumb_set HardFault_Handler,Default_Handler
-
- .weak SVC_Handler
- .thumb_set SVC_Handler,Default_Handler
-
- .weak PendSV_Handler
- .thumb_set PendSV_Handler,Default_Handler
-
- .weak SysTick_Handler
- .thumb_set SysTick_Handler,Default_Handler
-
- .weak WWDG_IRQHandler
- .thumb_set WWDG_IRQHandler,Default_Handler
-
- .weak PVD_IRQHandler
- .thumb_set PVD_IRQHandler,Default_Handler
-
- .weak RTC_IRQHandler
- .thumb_set RTC_IRQHandler,Default_Handler
-
- .weak FLASH_IRQHandler
- .thumb_set FLASH_IRQHandler,Default_Handler
-
- .weak RCC_CRS_IRQHandler
- .thumb_set RCC_CRS_IRQHandler,Default_Handler
-
- .weak EXTI0_1_IRQHandler
- .thumb_set EXTI0_1_IRQHandler,Default_Handler
-
- .weak EXTI2_3_IRQHandler
- .thumb_set EXTI2_3_IRQHandler,Default_Handler
-
- .weak EXTI4_15_IRQHandler
- .thumb_set EXTI4_15_IRQHandler,Default_Handler
-
- .weak TSC_IRQHandler
- .thumb_set TSC_IRQHandler,Default_Handler
-
- .weak DMA1_Channel1_IRQHandler
- .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
-
- .weak DMA1_Channel2_3_IRQHandler
- .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler
-
- .weak DMA1_Channel4_5_IRQHandler
- .thumb_set DMA1_Channel4_5_IRQHandler,Default_Handler
-
- .weak ADC1_COMP_IRQHandler
- .thumb_set ADC1_COMP_IRQHandler,Default_Handler
-
- .weak TIM1_BRK_UP_TRG_COM_IRQHandler
- .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
-
- .weak TIM1_CC_IRQHandler
- .thumb_set TIM1_CC_IRQHandler,Default_Handler
-
- .weak TIM2_IRQHandler
- .thumb_set TIM2_IRQHandler,Default_Handler
-
- .weak TIM3_IRQHandler
- .thumb_set TIM3_IRQHandler,Default_Handler
-
- .weak TIM6_DAC_IRQHandler
- .thumb_set TIM6_DAC_IRQHandler,Default_Handler
-
- .weak TIM14_IRQHandler
- .thumb_set TIM14_IRQHandler,Default_Handler
-
- .weak TIM15_IRQHandler
- .thumb_set TIM15_IRQHandler,Default_Handler
-
- .weak TIM16_IRQHandler
- .thumb_set TIM16_IRQHandler,Default_Handler
-
- .weak TIM17_IRQHandler
- .thumb_set TIM17_IRQHandler,Default_Handler
-
- .weak I2C1_IRQHandler
- .thumb_set I2C1_IRQHandler,Default_Handler
-
- .weak I2C2_IRQHandler
- .thumb_set I2C2_IRQHandler,Default_Handler
-
- .weak SPI1_IRQHandler
- .thumb_set SPI1_IRQHandler,Default_Handler
-
- .weak SPI2_IRQHandler
- .thumb_set SPI2_IRQHandler,Default_Handler
-
- .weak USART1_IRQHandler
- .thumb_set USART1_IRQHandler,Default_Handler
-
- .weak USART2_IRQHandler
- .thumb_set USART2_IRQHandler,Default_Handler
-
- .weak CEC_CAN_IRQHandler
- .thumb_set CEC_CAN_IRQHandler,Default_Handler
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
-
diff --git a/Blink/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f058xx.s b/Blink/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f058xx.s deleted file mode 100644 index f934e6b..0000000 --- a/Blink/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f058xx.s +++ /dev/null @@ -1,282 +0,0 @@ -/**
- ******************************************************************************
- * @file startup_stm32f058xx.s
- * @author MCD Application Team
- * @brief STM32F058xx devices vector table for GCC toolchain.
- * This module performs:
- * - Set the initial SP
- * - Set the initial PC == Reset_Handler,
- * - Set the vector table entries with the exceptions ISR address
- * - Branches to main in the C library (which eventually
- * calls main()).
- * After Reset the Cortex-M0 processor is in Thread mode,
- * priority is Privileged, and the Stack is set to Main.
- ******************************************************************************
- * @attention
- *
- * <h2><center>© Copyright (c) 2016 STMicroelectronics.
- * All rights reserved.</center></h2>
- *
- * This software component is licensed by ST under BSD 3-Clause license,
- * the "License"; You may not use this file except in compliance with the
- * License. You may obtain a copy of the License at:
- * opensource.org/licenses/BSD-3-Clause
- *
- ******************************************************************************
- */
-
- .syntax unified
- .cpu cortex-m0
- .fpu softvfp
- .thumb
-
-.global g_pfnVectors
-.global Default_Handler
-
-/* start address for the initialization values of the .data section.
-defined in linker script */
-.word _sidata
-/* start address for the .data section. defined in linker script */
-.word _sdata
-/* end address for the .data section. defined in linker script */
-.word _edata
-/* start address for the .bss section. defined in linker script */
-.word _sbss
-/* end address for the .bss section. defined in linker script */
-.word _ebss
-
- .section .text.Reset_Handler
- .weak Reset_Handler
- .type Reset_Handler, %function
-Reset_Handler:
- ldr r0, =_estack
- mov sp, r0 /* set stack pointer */
-
-/* Copy the data segment initializers from flash to SRAM */
- ldr r0, =_sdata
- ldr r1, =_edata
- ldr r2, =_sidata
- movs r3, #0
- b LoopCopyDataInit
-
-CopyDataInit:
- ldr r4, [r2, r3]
- str r4, [r0, r3]
- adds r3, r3, #4
-
-LoopCopyDataInit:
- adds r4, r0, r3
- cmp r4, r1
- bcc CopyDataInit
-
-/* Zero fill the bss segment. */
- ldr r2, =_sbss
- ldr r4, =_ebss
- movs r3, #0
- b LoopFillZerobss
-
-FillZerobss:
- str r3, [r2]
- adds r2, r2, #4
-
-LoopFillZerobss:
- cmp r2, r4
- bcc FillZerobss
-
-/* Call the clock system intitialization function.*/
- bl SystemInit
-/* Call static constructors */
- bl __libc_init_array
-/* Call the application's entry point.*/
- bl main
-
-LoopForever:
- b LoopForever
-
-
-.size Reset_Handler, .-Reset_Handler
-
-/**
- * @brief This is the code that gets called when the processor receives an
- * unexpected interrupt. This simply enters an infinite loop, preserving
- * the system state for examination by a debugger.
- *
- * @param None
- * @retval : None
-*/
- .section .text.Default_Handler,"ax",%progbits
-Default_Handler:
-Infinite_Loop:
- b Infinite_Loop
- .size Default_Handler, .-Default_Handler
-/******************************************************************************
-*
-* The minimal vector table for a Cortex M0. Note that the proper constructs
-* must be placed on this to ensure that it ends up at physical address
-* 0x0000.0000.
-*
-******************************************************************************/
- .section .isr_vector,"a",%progbits
- .type g_pfnVectors, %object
- .size g_pfnVectors, .-g_pfnVectors
-
-
-g_pfnVectors:
- .word _estack
- .word Reset_Handler
- .word NMI_Handler
- .word HardFault_Handler
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word SVC_Handler
- .word 0
- .word 0
- .word PendSV_Handler
- .word SysTick_Handler
- .word WWDG_IRQHandler /* Window WatchDog */
- .word 0 /* Reserved */
- .word RTC_IRQHandler /* RTC through the EXTI line */
- .word FLASH_IRQHandler /* FLASH */
- .word RCC_CRS_IRQHandler /* RCC and CRS */
- .word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
- .word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
- .word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
- .word TSC_IRQHandler /* TSC */
- .word DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */
- .word DMA1_Channel2_3_IRQHandler /* DMA1 Channel 2 and Channel 3 */
- .word DMA1_Channel4_5_IRQHandler /* DMA1 Channel 4 and Channel 5 */
- .word ADC1_COMP_IRQHandler /* ADC1, COMP1 and COMP2 */
- .word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
- .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
- .word TIM2_IRQHandler /* TIM2 */
- .word TIM3_IRQHandler /* TIM3 */
- .word TIM6_DAC_IRQHandler /* TIM6 and DAC */
- .word 0 /* Reserved */
- .word TIM14_IRQHandler /* TIM14 */
- .word TIM15_IRQHandler /* TIM15 */
- .word TIM16_IRQHandler /* TIM16 */
- .word TIM17_IRQHandler /* TIM17 */
- .word I2C1_IRQHandler /* I2C1 */
- .word I2C2_IRQHandler /* I2C2 */
- .word SPI1_IRQHandler /* SPI1 */
- .word SPI2_IRQHandler /* SPI2 */
- .word USART1_IRQHandler /* USART1 */
- .word USART2_IRQHandler /* USART2 */
- .word 0 /* Reserved */
- .word CEC_CAN_IRQHandler /* CEC and CAN */
- .word 0 /* Reserved */
-
-/*******************************************************************************
-*
-* Provide weak aliases for each Exception handler to the Default_Handler.
-* As they are weak aliases, any function with the same name will override
-* this definition.
-*
-*******************************************************************************/
-
- .weak NMI_Handler
- .thumb_set NMI_Handler,Default_Handler
-
- .weak HardFault_Handler
- .thumb_set HardFault_Handler,Default_Handler
-
- .weak SVC_Handler
- .thumb_set SVC_Handler,Default_Handler
-
- .weak PendSV_Handler
- .thumb_set PendSV_Handler,Default_Handler
-
- .weak SysTick_Handler
- .thumb_set SysTick_Handler,Default_Handler
-
- .weak WWDG_IRQHandler
- .thumb_set WWDG_IRQHandler,Default_Handler
-
- .weak RTC_IRQHandler
- .thumb_set RTC_IRQHandler,Default_Handler
-
- .weak FLASH_IRQHandler
- .thumb_set FLASH_IRQHandler,Default_Handler
-
- .weak RCC_CRS_IRQHandler
- .thumb_set RCC_CRS_IRQHandler,Default_Handler
-
- .weak EXTI0_1_IRQHandler
- .thumb_set EXTI0_1_IRQHandler,Default_Handler
-
- .weak EXTI2_3_IRQHandler
- .thumb_set EXTI2_3_IRQHandler,Default_Handler
-
- .weak EXTI4_15_IRQHandler
- .thumb_set EXTI4_15_IRQHandler,Default_Handler
-
- .weak TSC_IRQHandler
- .thumb_set TSC_IRQHandler,Default_Handler
-
- .weak DMA1_Channel1_IRQHandler
- .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
-
- .weak DMA1_Channel2_3_IRQHandler
- .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler
-
- .weak DMA1_Channel4_5_IRQHandler
- .thumb_set DMA1_Channel4_5_IRQHandler,Default_Handler
-
- .weak ADC1_COMP_IRQHandler
- .thumb_set ADC1_COMP_IRQHandler,Default_Handler
-
- .weak TIM1_BRK_UP_TRG_COM_IRQHandler
- .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
-
- .weak TIM1_CC_IRQHandler
- .thumb_set TIM1_CC_IRQHandler,Default_Handler
-
- .weak TIM2_IRQHandler
- .thumb_set TIM2_IRQHandler,Default_Handler
-
- .weak TIM3_IRQHandler
- .thumb_set TIM3_IRQHandler,Default_Handler
-
- .weak TIM6_DAC_IRQHandler
- .thumb_set TIM6_DAC_IRQHandler,Default_Handler
-
- .weak TIM14_IRQHandler
- .thumb_set TIM14_IRQHandler,Default_Handler
-
- .weak TIM15_IRQHandler
- .thumb_set TIM15_IRQHandler,Default_Handler
-
- .weak TIM16_IRQHandler
- .thumb_set TIM16_IRQHandler,Default_Handler
-
- .weak TIM17_IRQHandler
- .thumb_set TIM17_IRQHandler,Default_Handler
-
- .weak I2C1_IRQHandler
- .thumb_set I2C1_IRQHandler,Default_Handler
-
- .weak I2C2_IRQHandler
- .thumb_set I2C2_IRQHandler,Default_Handler
-
- .weak SPI1_IRQHandler
- .thumb_set SPI1_IRQHandler,Default_Handler
-
- .weak SPI2_IRQHandler
- .thumb_set SPI2_IRQHandler,Default_Handler
-
- .weak USART1_IRQHandler
- .thumb_set USART1_IRQHandler,Default_Handler
-
- .weak USART2_IRQHandler
- .thumb_set USART2_IRQHandler,Default_Handler
-
- .weak CEC_CAN_IRQHandler
- .thumb_set CEC_CAN_IRQHandler,Default_Handler
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
-
diff --git a/Blink/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f070x6.s b/Blink/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f070x6.s deleted file mode 100644 index c9e85bc..0000000 --- a/Blink/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f070x6.s +++ /dev/null @@ -1,294 +0,0 @@ -/**
- ******************************************************************************
- * @file startup_stm32f070x6.s
- * @author MCD Application Team
- * @brief STM32F070x4/STM32F070x6 devices vector table for GCC toolchain.
- * This module performs:
- * - Set the initial SP
- * - Set the initial PC == Reset_Handler,
- * - Set the vector table entries with the exceptions ISR address
- * - Branches to main in the C library (which eventually
- * calls main()).
- * After Reset the Cortex-M0 processor is in Thread mode,
- * priority is Privileged, and the Stack is set to Main.
- ******************************************************************************
- * @attention
- *
- * <h2><center>© Copyright (c) 2016 STMicroelectronics.
- * All rights reserved.</center></h2>
- *
- * This software component is licensed by ST under BSD 3-Clause license,
- * the "License"; You may not use this file except in compliance with the
- * License. You may obtain a copy of the License at:
- * opensource.org/licenses/BSD-3-Clause
- *
- ******************************************************************************
- */
-
- .syntax unified
- .cpu cortex-m0
- .fpu softvfp
- .thumb
-
-.global g_pfnVectors
-.global Default_Handler
-
-/* start address for the initialization values of the .data section.
-defined in linker script */
-.word _sidata
-/* start address for the .data section. defined in linker script */
-.word _sdata
-/* end address for the .data section. defined in linker script */
-.word _edata
-/* start address for the .bss section. defined in linker script */
-.word _sbss
-/* end address for the .bss section. defined in linker script */
-.word _ebss
-
-/**
- * @brief This is the code that gets called when the processor first
- * starts execution following a reset event. Only the absolutely
- * necessary set is performed, after which the application
- * supplied main() routine is called.
- * @param None
- * @retval : None
-*/
-
- .section .text.Reset_Handler
- .weak Reset_Handler
- .type Reset_Handler, %function
-Reset_Handler:
- ldr r0, =_estack
- mov sp, r0 /* set stack pointer */
-
-/*Check if boot space corresponds to test memory*/
-
- LDR R0,=0x00000004
- LDR R1, [R0]
- LSRS R1, R1, #24
- LDR R2,=0x1F
- CMP R1, R2
- BNE ApplicationStart
-
- /*SYSCFG clock enable*/
-
- LDR R0,=0x40021018
- LDR R1,=0x00000001
- STR R1, [R0]
-
-/*Set CFGR1 register with flash memory remap at address 0*/
- LDR R0,=0x40010000
- LDR R1,=0x00000000
- STR R1, [R0]
-
-ApplicationStart:
-/* Copy the data segment initializers from flash to SRAM */
- ldr r0, =_sdata
- ldr r1, =_edata
- ldr r2, =_sidata
- movs r3, #0
- b LoopCopyDataInit
-
-CopyDataInit:
- ldr r4, [r2, r3]
- str r4, [r0, r3]
- adds r3, r3, #4
-
-LoopCopyDataInit:
- adds r4, r0, r3
- cmp r4, r1
- bcc CopyDataInit
-
-/* Zero fill the bss segment. */
- ldr r2, =_sbss
- ldr r4, =_ebss
- movs r3, #0
- b LoopFillZerobss
-
-FillZerobss:
- str r3, [r2]
- adds r2, r2, #4
-
-LoopFillZerobss:
- cmp r2, r4
- bcc FillZerobss
-
-/* Call the clock system intitialization function.*/
- bl SystemInit
-/* Call static constructors */
- bl __libc_init_array
-/* Call the application's entry point.*/
- bl main
-
-LoopForever:
- b LoopForever
-
-
-.size Reset_Handler, .-Reset_Handler
-
-/**
- * @brief This is the code that gets called when the processor receives an
- * unexpected interrupt. This simply enters an infinite loop, preserving
- * the system state for examination by a debugger.
- *
- * @param None
- * @retval : None
-*/
- .section .text.Default_Handler,"ax",%progbits
-Default_Handler:
-Infinite_Loop:
- b Infinite_Loop
- .size Default_Handler, .-Default_Handler
-/******************************************************************************
-*
-* The minimal vector table for a Cortex M0. Note that the proper constructs
-* must be placed on this to ensure that it ends up at physical address
-* 0x0000.0000.
-*
-******************************************************************************/
- .section .isr_vector,"a",%progbits
- .type g_pfnVectors, %object
- .size g_pfnVectors, .-g_pfnVectors
-
-
-g_pfnVectors:
- .word _estack
- .word Reset_Handler
- .word NMI_Handler
- .word HardFault_Handler
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word SVC_Handler
- .word 0
- .word 0
- .word PendSV_Handler
- .word SysTick_Handler
- .word WWDG_IRQHandler /* Window WatchDog */
- .word 0 /* Reserved */
- .word RTC_IRQHandler /* RTC through the EXTI line */
- .word FLASH_IRQHandler /* FLASH */
- .word RCC_IRQHandler /* RCC */
- .word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
- .word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
- .word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
- .word 0 /* Reserved */
- .word DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */
- .word DMA1_Channel2_3_IRQHandler /* DMA1 Channel 2 and Channel 3 */
- .word DMA1_Channel4_5_IRQHandler /* DMA1 Channel 4 and Channel 5 */
- .word ADC1_IRQHandler /* ADC1 */
- .word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
- .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
- .word 0 /* Reserved */
- .word TIM3_IRQHandler /* TIM3 */
- .word 0 /* Reserved */
- .word 0 /* Reserved */
- .word TIM14_IRQHandler /* TIM14 */
- .word 0 /* Reserved */
- .word TIM16_IRQHandler /* TIM16 */
- .word TIM17_IRQHandler /* TIM17 */
- .word I2C1_IRQHandler /* I2C1 */
- .word 0 /* Reserved */
- .word SPI1_IRQHandler /* SPI1 */
- .word 0 /* Reserved */
- .word USART1_IRQHandler /* USART1 */
- .word USART2_IRQHandler /* USART2 */
- .word 0 /* Reserved */
- .word 0 /* Reserved */
- .word USB_IRQHandler /* USB */
-
-/*******************************************************************************
-*
-* Provide weak aliases for each Exception handler to the Default_Handler.
-* As they are weak aliases, any function with the same name will override
-* this definition.
-*
-*******************************************************************************/
-
- .weak NMI_Handler
- .thumb_set NMI_Handler,Default_Handler
-
- .weak HardFault_Handler
- .thumb_set HardFault_Handler,Default_Handler
-
- .weak SVC_Handler
- .thumb_set SVC_Handler,Default_Handler
-
- .weak PendSV_Handler
- .thumb_set PendSV_Handler,Default_Handler
-
- .weak SysTick_Handler
- .thumb_set SysTick_Handler,Default_Handler
-
- .weak WWDG_IRQHandler
- .thumb_set WWDG_IRQHandler,Default_Handler
-
- .weak RTC_IRQHandler
- .thumb_set RTC_IRQHandler,Default_Handler
-
- .weak FLASH_IRQHandler
- .thumb_set FLASH_IRQHandler,Default_Handler
-
- .weak RCC_IRQHandler
- .thumb_set RCC_IRQHandler,Default_Handler
-
- .weak EXTI0_1_IRQHandler
- .thumb_set EXTI0_1_IRQHandler,Default_Handler
-
- .weak EXTI2_3_IRQHandler
- .thumb_set EXTI2_3_IRQHandler,Default_Handler
-
- .weak EXTI4_15_IRQHandler
- .thumb_set EXTI4_15_IRQHandler,Default_Handler
-
- .weak DMA1_Channel1_IRQHandler
- .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
-
- .weak DMA1_Channel2_3_IRQHandler
- .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler
-
- .weak DMA1_Channel4_5_IRQHandler
- .thumb_set DMA1_Channel4_5_IRQHandler,Default_Handler
-
- .weak ADC1_IRQHandler
- .thumb_set ADC1_IRQHandler,Default_Handler
-
- .weak TIM1_BRK_UP_TRG_COM_IRQHandler
- .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
-
- .weak TIM1_CC_IRQHandler
- .thumb_set TIM1_CC_IRQHandler,Default_Handler
-
- .weak TIM3_IRQHandler
- .thumb_set TIM3_IRQHandler,Default_Handler
-
- .weak TIM14_IRQHandler
- .thumb_set TIM14_IRQHandler,Default_Handler
-
- .weak TIM16_IRQHandler
- .thumb_set TIM16_IRQHandler,Default_Handler
-
- .weak TIM17_IRQHandler
- .thumb_set TIM17_IRQHandler,Default_Handler
-
- .weak I2C1_IRQHandler
- .thumb_set I2C1_IRQHandler,Default_Handler
-
- .weak SPI1_IRQHandler
- .thumb_set SPI1_IRQHandler,Default_Handler
-
- .weak USART1_IRQHandler
- .thumb_set USART1_IRQHandler,Default_Handler
-
- .weak USART2_IRQHandler
- .thumb_set USART2_IRQHandler,Default_Handler
-
- .weak USB_IRQHandler
- .thumb_set USB_IRQHandler,Default_Handler
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
-
diff --git a/Blink/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f070xb.s b/Blink/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f070xb.s deleted file mode 100644 index c3026e0..0000000 --- a/Blink/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f070xb.s +++ /dev/null @@ -1,282 +0,0 @@ -/**
- ******************************************************************************
- * @file startup_stm32f070xb.s
- * @author MCD Application Team
- * @brief STM32F070xb/STM32F070x8 devices vector table for GCC toolchain.
- * This module performs:
- * - Set the initial SP
- * - Set the initial PC == Reset_Handler,
- * - Set the vector table entries with the exceptions ISR address
- * - Branches to main in the C library (which eventually
- * calls main()).
- * After Reset the Cortex-M0 processor is in Thread mode,
- * priority is Privileged, and the Stack is set to Main.
- ******************************************************************************
- * @attention
- *
- * <h2><center>© Copyright (c) 2016 STMicroelectronics.
- * All rights reserved.</center></h2>
- *
- * This software component is licensed by ST under BSD 3-Clause license,
- * the "License"; You may not use this file except in compliance with the
- * License. You may obtain a copy of the License at:
- * opensource.org/licenses/BSD-3-Clause
- *
- ******************************************************************************
- */
-
- .syntax unified
- .cpu cortex-m0
- .fpu softvfp
- .thumb
-
-.global g_pfnVectors
-.global Default_Handler
-
-/* start address for the initialization values of the .data section.
-defined in linker script */
-.word _sidata
-/* start address for the .data section. defined in linker script */
-.word _sdata
-/* end address for the .data section. defined in linker script */
-.word _edata
-/* start address for the .bss section. defined in linker script */
-.word _sbss
-/* end address for the .bss section. defined in linker script */
-.word _ebss
-
- .section .text.Reset_Handler
- .weak Reset_Handler
- .type Reset_Handler, %function
-Reset_Handler:
- ldr r0, =_estack
- mov sp, r0 /* set stack pointer */
-
-/* Copy the data segment initializers from flash to SRAM */
- ldr r0, =_sdata
- ldr r1, =_edata
- ldr r2, =_sidata
- movs r3, #0
- b LoopCopyDataInit
-
-CopyDataInit:
- ldr r4, [r2, r3]
- str r4, [r0, r3]
- adds r3, r3, #4
-
-LoopCopyDataInit:
- adds r4, r0, r3
- cmp r4, r1
- bcc CopyDataInit
-
-/* Zero fill the bss segment. */
- ldr r2, =_sbss
- ldr r4, =_ebss
- movs r3, #0
- b LoopFillZerobss
-
-FillZerobss:
- str r3, [r2]
- adds r2, r2, #4
-
-LoopFillZerobss:
- cmp r2, r4
- bcc FillZerobss
-
-/* Call the clock system intitialization function.*/
- bl SystemInit
-/* Call static constructors */
- bl __libc_init_array
-/* Call the application's entry point.*/
- bl main
-
-LoopForever:
- b LoopForever
-
-
-.size Reset_Handler, .-Reset_Handler
-
-/**
- * @brief This is the code that gets called when the processor receives an
- * unexpected interrupt. This simply enters an infinite loop, preserving
- * the system state for examination by a debugger.
- *
- * @param None
- * @retval : None
-*/
- .section .text.Default_Handler,"ax",%progbits
-Default_Handler:
-Infinite_Loop:
- b Infinite_Loop
- .size Default_Handler, .-Default_Handler
-/******************************************************************************
-*
-* The minimal vector table for a Cortex M0. Note that the proper constructs
-* must be placed on this to ensure that it ends up at physical address
-* 0x0000.0000.
-*
-******************************************************************************/
- .section .isr_vector,"a",%progbits
- .type g_pfnVectors, %object
- .size g_pfnVectors, .-g_pfnVectors
-
-
-g_pfnVectors:
- .word _estack
- .word Reset_Handler
- .word NMI_Handler
- .word HardFault_Handler
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word SVC_Handler
- .word 0
- .word 0
- .word PendSV_Handler
- .word SysTick_Handler
- .word WWDG_IRQHandler /* Window WatchDog */
- .word 0 /* Reserved */
- .word RTC_IRQHandler /* RTC through the EXTI line */
- .word FLASH_IRQHandler /* FLASH */
- .word RCC_IRQHandler /* RCC */
- .word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
- .word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
- .word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
- .word 0 /* Reserved */
- .word DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */
- .word DMA1_Channel2_3_IRQHandler /* DMA1 Channel 2 and Channel 3 */
- .word DMA1_Channel4_5_IRQHandler /* DMA1 Channel 4 and Channel 5 */
- .word ADC1_IRQHandler /* ADC1 */
- .word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
- .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
- .word 0 /* Reserved */
- .word TIM3_IRQHandler /* TIM3 */
- .word TIM6_IRQHandler /* TIM6 */
- .word TIM7_IRQHandler /* TIM7 */
- .word TIM14_IRQHandler /* TIM14 */
- .word TIM15_IRQHandler /* TIM15 */
- .word TIM16_IRQHandler /* TIM16 */
- .word TIM17_IRQHandler /* TIM17 */
- .word I2C1_IRQHandler /* I2C1 */
- .word I2C2_IRQHandler /* I2C2 */
- .word SPI1_IRQHandler /* SPI1 */
- .word SPI2_IRQHandler /* SPI2 */
- .word USART1_IRQHandler /* USART1 */
- .word USART2_IRQHandler /* USART2 */
- .word USART3_4_IRQHandler /* USART3 and USART4 */
- .word 0 /* Reserved */
- .word USB_IRQHandler /* USB */
-
-/*******************************************************************************
-*
-* Provide weak aliases for each Exception handler to the Default_Handler.
-* As they are weak aliases, any function with the same name will override
-* this definition.
-*
-*******************************************************************************/
-
- .weak NMI_Handler
- .thumb_set NMI_Handler,Default_Handler
-
- .weak HardFault_Handler
- .thumb_set HardFault_Handler,Default_Handler
-
- .weak SVC_Handler
- .thumb_set SVC_Handler,Default_Handler
-
- .weak PendSV_Handler
- .thumb_set PendSV_Handler,Default_Handler
-
- .weak SysTick_Handler
- .thumb_set SysTick_Handler,Default_Handler
-
- .weak WWDG_IRQHandler
- .thumb_set WWDG_IRQHandler,Default_Handler
-
- .weak RTC_IRQHandler
- .thumb_set RTC_IRQHandler,Default_Handler
-
- .weak FLASH_IRQHandler
- .thumb_set FLASH_IRQHandler,Default_Handler
-
- .weak RCC_IRQHandler
- .thumb_set RCC_IRQHandler,Default_Handler
-
- .weak EXTI0_1_IRQHandler
- .thumb_set EXTI0_1_IRQHandler,Default_Handler
-
- .weak EXTI2_3_IRQHandler
- .thumb_set EXTI2_3_IRQHandler,Default_Handler
-
- .weak EXTI4_15_IRQHandler
- .thumb_set EXTI4_15_IRQHandler,Default_Handler
-
- .weak DMA1_Channel1_IRQHandler
- .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
-
- .weak DMA1_Channel2_3_IRQHandler
- .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler
-
- .weak DMA1_Channel4_5_IRQHandler
- .thumb_set DMA1_Channel4_5_IRQHandler,Default_Handler
-
- .weak ADC1_IRQHandler
- .thumb_set ADC1_IRQHandler,Default_Handler
-
- .weak TIM1_BRK_UP_TRG_COM_IRQHandler
- .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
-
- .weak TIM1_CC_IRQHandler
- .thumb_set TIM1_CC_IRQHandler,Default_Handler
-
- .weak TIM3_IRQHandler
- .thumb_set TIM3_IRQHandler,Default_Handler
-
- .weak TIM6_IRQHandler
- .thumb_set TIM6_IRQHandler,Default_Handler
-
- .weak TIM7_IRQHandler
- .thumb_set TIM7_IRQHandler,Default_Handler
-
- .weak TIM14_IRQHandler
- .thumb_set TIM14_IRQHandler,Default_Handler
-
- .weak TIM15_IRQHandler
- .thumb_set TIM15_IRQHandler,Default_Handler
-
- .weak TIM16_IRQHandler
- .thumb_set TIM16_IRQHandler,Default_Handler
-
- .weak TIM17_IRQHandler
- .thumb_set TIM17_IRQHandler,Default_Handler
-
- .weak I2C1_IRQHandler
- .thumb_set I2C1_IRQHandler,Default_Handler
-
- .weak I2C2_IRQHandler
- .thumb_set I2C2_IRQHandler,Default_Handler
-
- .weak SPI1_IRQHandler
- .thumb_set SPI1_IRQHandler,Default_Handler
-
- .weak SPI2_IRQHandler
- .thumb_set SPI2_IRQHandler,Default_Handler
-
- .weak USART1_IRQHandler
- .thumb_set USART1_IRQHandler,Default_Handler
-
- .weak USART2_IRQHandler
- .thumb_set USART2_IRQHandler,Default_Handler
-
- .weak USART3_4_IRQHandler
- .thumb_set USART3_4_IRQHandler,Default_Handler
-
- .weak USB_IRQHandler
- .thumb_set USB_IRQHandler,Default_Handler
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
-
diff --git a/Blink/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f071xb.s b/Blink/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f071xb.s deleted file mode 100644 index 7dcb62d..0000000 --- a/Blink/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f071xb.s +++ /dev/null @@ -1,291 +0,0 @@ -/**
- ******************************************************************************
- * @file startup_stm32f071xb.s
- * @author MCD Application Team
- * @brief STM32F071x8/STM32F071xB devices vector table for GCC toolchain.
- * This module performs:
- * - Set the initial SP
- * - Set the initial PC == Reset_Handler,
- * - Set the vector table entries with the exceptions ISR address
- * - Branches to main in the C library (which eventually
- * calls main()).
- * After Reset the Cortex-M0 processor is in Thread mode,
- * priority is Privileged, and the Stack is set to Main.
- ******************************************************************************
- * @attention
- *
- * <h2><center>© Copyright (c) 2016 STMicroelectronics.
- * All rights reserved.</center></h2>
- *
- * This software component is licensed by ST under BSD 3-Clause license,
- * the "License"; You may not use this file except in compliance with the
- * License. You may obtain a copy of the License at:
- * opensource.org/licenses/BSD-3-Clause
- *
- ******************************************************************************
- */
-
- .syntax unified
- .cpu cortex-m0
- .fpu softvfp
- .thumb
-
-.global g_pfnVectors
-.global Default_Handler
-
-/* start address for the initialization values of the .data section.
-defined in linker script */
-.word _sidata
-/* start address for the .data section. defined in linker script */
-.word _sdata
-/* end address for the .data section. defined in linker script */
-.word _edata
-/* start address for the .bss section. defined in linker script */
-.word _sbss
-/* end address for the .bss section. defined in linker script */
-.word _ebss
-
- .section .text.Reset_Handler
- .weak Reset_Handler
- .type Reset_Handler, %function
-Reset_Handler:
- ldr r0, =_estack
- mov sp, r0 /* set stack pointer */
-
-/* Copy the data segment initializers from flash to SRAM */
- ldr r0, =_sdata
- ldr r1, =_edata
- ldr r2, =_sidata
- movs r3, #0
- b LoopCopyDataInit
-
-CopyDataInit:
- ldr r4, [r2, r3]
- str r4, [r0, r3]
- adds r3, r3, #4
-
-LoopCopyDataInit:
- adds r4, r0, r3
- cmp r4, r1
- bcc CopyDataInit
-
-/* Zero fill the bss segment. */
- ldr r2, =_sbss
- ldr r4, =_ebss
- movs r3, #0
- b LoopFillZerobss
-
-FillZerobss:
- str r3, [r2]
- adds r2, r2, #4
-
-LoopFillZerobss:
- cmp r2, r4
- bcc FillZerobss
-
-/* Call the clock system intitialization function.*/
- bl SystemInit
-/* Call static constructors */
- bl __libc_init_array
-/* Call the application's entry point.*/
- bl main
-
-LoopForever:
- b LoopForever
-
-
-.size Reset_Handler, .-Reset_Handler
-
-/**
- * @brief This is the code that gets called when the processor receives an
- * unexpected interrupt. This simply enters an infinite loop, preserving
- * the system state for examination by a debugger.
- *
- * @param None
- * @retval : None
-*/
- .section .text.Default_Handler,"ax",%progbits
-Default_Handler:
-Infinite_Loop:
- b Infinite_Loop
- .size Default_Handler, .-Default_Handler
-/******************************************************************************
-*
-* The minimal vector table for a Cortex M0. Note that the proper constructs
-* must be placed on this to ensure that it ends up at physical address
-* 0x0000.0000.
-*
-******************************************************************************/
- .section .isr_vector,"a",%progbits
- .type g_pfnVectors, %object
- .size g_pfnVectors, .-g_pfnVectors
-
-
-g_pfnVectors:
- .word _estack
- .word Reset_Handler
- .word NMI_Handler
- .word HardFault_Handler
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word SVC_Handler
- .word 0
- .word 0
- .word PendSV_Handler
- .word SysTick_Handler
- .word WWDG_IRQHandler /* Window WatchDog */
- .word PVD_VDDIO2_IRQHandler /* PVD and VDDIO2 through EXTI Line detect */
- .word RTC_IRQHandler /* RTC through the EXTI line */
- .word FLASH_IRQHandler /* FLASH */
- .word RCC_CRS_IRQHandler /* RCC and CRS */
- .word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
- .word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
- .word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
- .word TSC_IRQHandler /* TSC */
- .word DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */
- .word DMA1_Channel2_3_IRQHandler /* DMA1 Channel 2 and Channel 3 */
- .word DMA1_Channel4_5_6_7_IRQHandler /* DMA1 Channel 4, Channel 5, Channel 6 and Channel 7*/
- .word ADC1_COMP_IRQHandler /* ADC1, COMP1 and COMP2 */
- .word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
- .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
- .word TIM2_IRQHandler /* TIM2 */
- .word TIM3_IRQHandler /* TIM3 */
- .word TIM6_DAC_IRQHandler /* TIM6 and DAC */
- .word TIM7_IRQHandler /* TIM7 */
- .word TIM14_IRQHandler /* TIM14 */
- .word TIM15_IRQHandler /* TIM15 */
- .word TIM16_IRQHandler /* TIM16 */
- .word TIM17_IRQHandler /* TIM17 */
- .word I2C1_IRQHandler /* I2C1 */
- .word I2C2_IRQHandler /* I2C2 */
- .word SPI1_IRQHandler /* SPI1 */
- .word SPI2_IRQHandler /* SPI2 */
- .word USART1_IRQHandler /* USART1 */
- .word USART2_IRQHandler /* USART2 */
- .word USART3_4_IRQHandler /* USART3 and USART4 */
- .word CEC_CAN_IRQHandler /* CEC and CAN */
- .word 0 /* Reserved */
-
-/*******************************************************************************
-*
-* Provide weak aliases for each Exception handler to the Default_Handler.
-* As they are weak aliases, any function with the same name will override
-* this definition.
-*
-*******************************************************************************/
-
- .weak NMI_Handler
- .thumb_set NMI_Handler,Default_Handler
-
- .weak HardFault_Handler
- .thumb_set HardFault_Handler,Default_Handler
-
- .weak SVC_Handler
- .thumb_set SVC_Handler,Default_Handler
-
- .weak PendSV_Handler
- .thumb_set PendSV_Handler,Default_Handler
-
- .weak SysTick_Handler
- .thumb_set SysTick_Handler,Default_Handler
-
- .weak WWDG_IRQHandler
- .thumb_set WWDG_IRQHandler,Default_Handler
-
- .weak PVD_VDDIO2_IRQHandler
- .thumb_set PVD_VDDIO2_IRQHandler,Default_Handler
-
- .weak RTC_IRQHandler
- .thumb_set RTC_IRQHandler,Default_Handler
-
- .weak FLASH_IRQHandler
- .thumb_set FLASH_IRQHandler,Default_Handler
-
- .weak RCC_CRS_IRQHandler
- .thumb_set RCC_CRS_IRQHandler,Default_Handler
-
- .weak EXTI0_1_IRQHandler
- .thumb_set EXTI0_1_IRQHandler,Default_Handler
-
- .weak EXTI2_3_IRQHandler
- .thumb_set EXTI2_3_IRQHandler,Default_Handler
-
- .weak EXTI4_15_IRQHandler
- .thumb_set EXTI4_15_IRQHandler,Default_Handler
-
- .weak TSC_IRQHandler
- .thumb_set TSC_IRQHandler,Default_Handler
-
- .weak DMA1_Channel1_IRQHandler
- .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
-
- .weak DMA1_Channel2_3_IRQHandler
- .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler
-
- .weak DMA1_Channel4_5_6_7_IRQHandler
- .thumb_set DMA1_Channel4_5_6_7_IRQHandler,Default_Handler
-
- .weak ADC1_COMP_IRQHandler
- .thumb_set ADC1_COMP_IRQHandler,Default_Handler
-
- .weak TIM1_BRK_UP_TRG_COM_IRQHandler
- .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
-
- .weak TIM1_CC_IRQHandler
- .thumb_set TIM1_CC_IRQHandler,Default_Handler
-
- .weak TIM2_IRQHandler
- .thumb_set TIM2_IRQHandler,Default_Handler
-
- .weak TIM3_IRQHandler
- .thumb_set TIM3_IRQHandler,Default_Handler
-
- .weak TIM6_DAC_IRQHandler
- .thumb_set TIM6_DAC_IRQHandler,Default_Handler
-
- .weak TIM7_IRQHandler
- .thumb_set TIM7_IRQHandler,Default_Handler
-
- .weak TIM14_IRQHandler
- .thumb_set TIM14_IRQHandler,Default_Handler
-
- .weak TIM15_IRQHandler
- .thumb_set TIM15_IRQHandler,Default_Handler
-
- .weak TIM16_IRQHandler
- .thumb_set TIM16_IRQHandler,Default_Handler
-
- .weak TIM17_IRQHandler
- .thumb_set TIM17_IRQHandler,Default_Handler
-
- .weak I2C1_IRQHandler
- .thumb_set I2C1_IRQHandler,Default_Handler
-
- .weak I2C2_IRQHandler
- .thumb_set I2C2_IRQHandler,Default_Handler
-
- .weak SPI1_IRQHandler
- .thumb_set SPI1_IRQHandler,Default_Handler
-
- .weak SPI2_IRQHandler
- .thumb_set SPI2_IRQHandler,Default_Handler
-
- .weak USART1_IRQHandler
- .thumb_set USART1_IRQHandler,Default_Handler
-
- .weak USART2_IRQHandler
- .thumb_set USART2_IRQHandler,Default_Handler
-
- .weak USART3_4_IRQHandler
- .thumb_set USART3_4_IRQHandler,Default_Handler
-
- .weak CEC_CAN_IRQHandler
- .thumb_set CEC_CAN_IRQHandler,Default_Handler
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
-
diff --git a/Blink/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f072xb.s b/Blink/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f072xb.s deleted file mode 100644 index 9d431a9..0000000 --- a/Blink/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f072xb.s +++ /dev/null @@ -1,294 +0,0 @@ -/**
- ******************************************************************************
- * @file startup_stm32f072xb.s
- * @author MCD Application Team
- * @brief STM32F072x8/STM32F072xB devices vector table for GCC toolchain.
- * This module performs:
- * - Set the initial SP
- * - Set the initial PC == Reset_Handler,
- * - Set the vector table entries with the exceptions ISR address
- * - Branches to main in the C library (which eventually
- * calls main()).
- * After Reset the Cortex-M0 processor is in Thread mode,
- * priority is Privileged, and the Stack is set to Main.
- ******************************************************************************
- * @attention
- *
- * <h2><center>© Copyright (c) 2016 STMicroelectronics.
- * All rights reserved.</center></h2>
- *
- * This software component is licensed by ST under BSD 3-Clause license,
- * the "License"; You may not use this file except in compliance with the
- * License. You may obtain a copy of the License at:
- * opensource.org/licenses/BSD-3-Clause
- *
- ******************************************************************************
- */
-
- .syntax unified
- .cpu cortex-m0
- .fpu softvfp
- .thumb
-
-.global g_pfnVectors
-.global Default_Handler
-
-/* start address for the initialization values of the .data section.
-defined in linker script */
-.word _sidata
-/* start address for the .data section. defined in linker script */
-.word _sdata
-/* end address for the .data section. defined in linker script */
-.word _edata
-/* start address for the .bss section. defined in linker script */
-.word _sbss
-/* end address for the .bss section. defined in linker script */
-.word _ebss
-
- .section .text.Reset_Handler
- .weak Reset_Handler
- .type Reset_Handler, %function
-Reset_Handler:
- ldr r0, =_estack
- mov sp, r0 /* set stack pointer */
-
-/* Copy the data segment initializers from flash to SRAM */
- ldr r0, =_sdata
- ldr r1, =_edata
- ldr r2, =_sidata
- movs r3, #0
- b LoopCopyDataInit
-
-CopyDataInit:
- ldr r4, [r2, r3]
- str r4, [r0, r3]
- adds r3, r3, #4
-
-LoopCopyDataInit:
- adds r4, r0, r3
- cmp r4, r1
- bcc CopyDataInit
-
-/* Zero fill the bss segment. */
- ldr r2, =_sbss
- ldr r4, =_ebss
- movs r3, #0
- b LoopFillZerobss
-
-FillZerobss:
- str r3, [r2]
- adds r2, r2, #4
-
-LoopFillZerobss:
- cmp r2, r4
- bcc FillZerobss
-
-/* Call the clock system intitialization function.*/
- bl SystemInit
-/* Call static constructors */
- bl __libc_init_array
-/* Call the application's entry point.*/
- bl main
-
-LoopForever:
- b LoopForever
-
-
-.size Reset_Handler, .-Reset_Handler
-
-/**
- * @brief This is the code that gets called when the processor receives an
- * unexpected interrupt. This simply enters an infinite loop, preserving
- * the system state for examination by a debugger.
- *
- * @param None
- * @retval : None
-*/
- .section .text.Default_Handler,"ax",%progbits
-Default_Handler:
-Infinite_Loop:
- b Infinite_Loop
- .size Default_Handler, .-Default_Handler
-/******************************************************************************
-*
-* The minimal vector table for a Cortex M0. Note that the proper constructs
-* must be placed on this to ensure that it ends up at physical address
-* 0x0000.0000.
-*
-******************************************************************************/
- .section .isr_vector,"a",%progbits
- .type g_pfnVectors, %object
- .size g_pfnVectors, .-g_pfnVectors
-
-
-g_pfnVectors:
- .word _estack
- .word Reset_Handler
- .word NMI_Handler
- .word HardFault_Handler
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word SVC_Handler
- .word 0
- .word 0
- .word PendSV_Handler
- .word SysTick_Handler
- .word WWDG_IRQHandler /* Window WatchDog */
- .word PVD_VDDIO2_IRQHandler /* PVD and VDDIO2 through EXTI Line detect */
- .word RTC_IRQHandler /* RTC through the EXTI line */
- .word FLASH_IRQHandler /* FLASH */
- .word RCC_CRS_IRQHandler /* RCC and CRS */
- .word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
- .word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
- .word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
- .word TSC_IRQHandler /* TSC */
- .word DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */
- .word DMA1_Channel2_3_IRQHandler /* DMA1 Channel 2 and Channel 3 */
- .word DMA1_Channel4_5_6_7_IRQHandler /* DMA1 Channel 4, Channel 5, Channel 6 and Channel 7*/
- .word ADC1_COMP_IRQHandler /* ADC1, COMP1 and COMP2 */
- .word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
- .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
- .word TIM2_IRQHandler /* TIM2 */
- .word TIM3_IRQHandler /* TIM3 */
- .word TIM6_DAC_IRQHandler /* TIM6 and DAC */
- .word TIM7_IRQHandler /* TIM7 */
- .word TIM14_IRQHandler /* TIM14 */
- .word TIM15_IRQHandler /* TIM15 */
- .word TIM16_IRQHandler /* TIM16 */
- .word TIM17_IRQHandler /* TIM17 */
- .word I2C1_IRQHandler /* I2C1 */
- .word I2C2_IRQHandler /* I2C2 */
- .word SPI1_IRQHandler /* SPI1 */
- .word SPI2_IRQHandler /* SPI2 */
- .word USART1_IRQHandler /* USART1 */
- .word USART2_IRQHandler /* USART2 */
- .word USART3_4_IRQHandler /* USART3 and USART4 */
- .word CEC_CAN_IRQHandler /* CEC and CAN */
- .word USB_IRQHandler /* USB */
-
-/*******************************************************************************
-*
-* Provide weak aliases for each Exception handler to the Default_Handler.
-* As they are weak aliases, any function with the same name will override
-* this definition.
-*
-*******************************************************************************/
-
- .weak NMI_Handler
- .thumb_set NMI_Handler,Default_Handler
-
- .weak HardFault_Handler
- .thumb_set HardFault_Handler,Default_Handler
-
- .weak SVC_Handler
- .thumb_set SVC_Handler,Default_Handler
-
- .weak PendSV_Handler
- .thumb_set PendSV_Handler,Default_Handler
-
- .weak SysTick_Handler
- .thumb_set SysTick_Handler,Default_Handler
-
- .weak WWDG_IRQHandler
- .thumb_set WWDG_IRQHandler,Default_Handler
-
- .weak PVD_VDDIO2_IRQHandler
- .thumb_set PVD_VDDIO2_IRQHandler,Default_Handler
-
- .weak RTC_IRQHandler
- .thumb_set RTC_IRQHandler,Default_Handler
-
- .weak FLASH_IRQHandler
- .thumb_set FLASH_IRQHandler,Default_Handler
-
- .weak RCC_CRS_IRQHandler
- .thumb_set RCC_CRS_IRQHandler,Default_Handler
-
- .weak EXTI0_1_IRQHandler
- .thumb_set EXTI0_1_IRQHandler,Default_Handler
-
- .weak EXTI2_3_IRQHandler
- .thumb_set EXTI2_3_IRQHandler,Default_Handler
-
- .weak EXTI4_15_IRQHandler
- .thumb_set EXTI4_15_IRQHandler,Default_Handler
-
- .weak TSC_IRQHandler
- .thumb_set TSC_IRQHandler,Default_Handler
-
- .weak DMA1_Channel1_IRQHandler
- .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
-
- .weak DMA1_Channel2_3_IRQHandler
- .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler
-
- .weak DMA1_Channel4_5_6_7_IRQHandler
- .thumb_set DMA1_Channel4_5_6_7_IRQHandler,Default_Handler
-
- .weak ADC1_COMP_IRQHandler
- .thumb_set ADC1_COMP_IRQHandler,Default_Handler
-
- .weak TIM1_BRK_UP_TRG_COM_IRQHandler
- .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
-
- .weak TIM1_CC_IRQHandler
- .thumb_set TIM1_CC_IRQHandler,Default_Handler
-
- .weak TIM2_IRQHandler
- .thumb_set TIM2_IRQHandler,Default_Handler
-
- .weak TIM3_IRQHandler
- .thumb_set TIM3_IRQHandler,Default_Handler
-
- .weak TIM6_DAC_IRQHandler
- .thumb_set TIM6_DAC_IRQHandler,Default_Handler
-
- .weak TIM7_IRQHandler
- .thumb_set TIM7_IRQHandler,Default_Handler
-
- .weak TIM14_IRQHandler
- .thumb_set TIM14_IRQHandler,Default_Handler
-
- .weak TIM15_IRQHandler
- .thumb_set TIM15_IRQHandler,Default_Handler
-
- .weak TIM16_IRQHandler
- .thumb_set TIM16_IRQHandler,Default_Handler
-
- .weak TIM17_IRQHandler
- .thumb_set TIM17_IRQHandler,Default_Handler
-
- .weak I2C1_IRQHandler
- .thumb_set I2C1_IRQHandler,Default_Handler
-
- .weak I2C2_IRQHandler
- .thumb_set I2C2_IRQHandler,Default_Handler
-
- .weak SPI1_IRQHandler
- .thumb_set SPI1_IRQHandler,Default_Handler
-
- .weak SPI2_IRQHandler
- .thumb_set SPI2_IRQHandler,Default_Handler
-
- .weak USART1_IRQHandler
- .thumb_set USART1_IRQHandler,Default_Handler
-
- .weak USART2_IRQHandler
- .thumb_set USART2_IRQHandler,Default_Handler
-
- .weak USART3_4_IRQHandler
- .thumb_set USART3_4_IRQHandler,Default_Handler
-
- .weak CEC_CAN_IRQHandler
- .thumb_set CEC_CAN_IRQHandler,Default_Handler
-
- .weak USB_IRQHandler
- .thumb_set USB_IRQHandler,Default_Handler
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
-
diff --git a/Blink/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f078xx.s b/Blink/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f078xx.s deleted file mode 100644 index c7b54ba..0000000 --- a/Blink/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f078xx.s +++ /dev/null @@ -1,294 +0,0 @@ -/**
- ******************************************************************************
- * @file startup_stm32f078xx.s
- * @author MCD Application Team
- * @brief STM32F078xx devices vector table for GCC toolchain.
- * This module performs:
- * - Set the initial SP
- * - Set the initial PC == Reset_Handler,
- * - Set the vector table entries with the exceptions ISR address
- * - Branches to main in the C library (which eventually
- * calls main()).
- * After Reset the Cortex-M0 processor is in Thread mode,
- * priority is Privileged, and the Stack is set to Main.
- ******************************************************************************
- * @attention
- *
- * <h2><center>© Copyright (c) 2016 STMicroelectronics.
- * All rights reserved.</center></h2>
- *
- * This software component is licensed by ST under BSD 3-Clause license,
- * the "License"; You may not use this file except in compliance with the
- * License. You may obtain a copy of the License at:
- * opensource.org/licenses/BSD-3-Clause
- *
- ******************************************************************************
- */
-
- .syntax unified
- .cpu cortex-m0
- .fpu softvfp
- .thumb
-
-.global g_pfnVectors
-.global Default_Handler
-
-/* start address for the initialization values of the .data section.
-defined in linker script */
-.word _sidata
-/* start address for the .data section. defined in linker script */
-.word _sdata
-/* end address for the .data section. defined in linker script */
-.word _edata
-/* start address for the .bss section. defined in linker script */
-.word _sbss
-/* end address for the .bss section. defined in linker script */
-.word _ebss
-
- .section .text.Reset_Handler
- .weak Reset_Handler
- .type Reset_Handler, %function
-Reset_Handler:
- ldr r0, =_estack
- mov sp, r0 /* set stack pointer */
-
-/* Copy the data segment initializers from flash to SRAM */
- ldr r0, =_sdata
- ldr r1, =_edata
- ldr r2, =_sidata
- movs r3, #0
- b LoopCopyDataInit
-
-CopyDataInit:
- ldr r4, [r2, r3]
- str r4, [r0, r3]
- adds r3, r3, #4
-
-LoopCopyDataInit:
- adds r4, r0, r3
- cmp r4, r1
- bcc CopyDataInit
-
-/* Zero fill the bss segment. */
- ldr r2, =_sbss
- ldr r4, =_ebss
- movs r3, #0
- b LoopFillZerobss
-
-FillZerobss:
- str r3, [r2]
- adds r2, r2, #4
-
-LoopFillZerobss:
- cmp r2, r4
- bcc FillZerobss
-
-/* Call the clock system intitialization function.*/
- bl SystemInit
-/* Call static constructors */
- bl __libc_init_array
-/* Call the application's entry point.*/
- bl main
-
-LoopForever:
- b LoopForever
-
-
-.size Reset_Handler, .-Reset_Handler
-
-/**
- * @brief This is the code that gets called when the processor receives an
- * unexpected interrupt. This simply enters an infinite loop, preserving
- * the system state for examination by a debugger.
- *
- * @param None
- * @retval : None
-*/
- .section .text.Default_Handler,"ax",%progbits
-Default_Handler:
-Infinite_Loop:
- b Infinite_Loop
- .size Default_Handler, .-Default_Handler
-/******************************************************************************
-*
-* The minimal vector table for a Cortex M0. Note that the proper constructs
-* must be placed on this to ensure that it ends up at physical address
-* 0x0000.0000.
-*
-******************************************************************************/
- .section .isr_vector,"a",%progbits
- .type g_pfnVectors, %object
- .size g_pfnVectors, .-g_pfnVectors
-
-
-g_pfnVectors:
- .word _estack
- .word Reset_Handler
- .word NMI_Handler
- .word HardFault_Handler
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word SVC_Handler
- .word 0
- .word 0
- .word PendSV_Handler
- .word SysTick_Handler
- .word WWDG_IRQHandler /* Window WatchDog */
- .word VDDIO2_IRQHandler /* VDDIO2 Monitor through EXTI Line 31 */
- .word RTC_IRQHandler /* RTC through the EXTI line */
- .word FLASH_IRQHandler /* FLASH */
- .word RCC_CRS_IRQHandler /* RCC and CRS */
- .word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
- .word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
- .word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
- .word TSC_IRQHandler /* TSC */
- .word DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */
- .word DMA1_Channel2_3_IRQHandler /* DMA1 Channel 2 and Channel 3 */
- .word DMA1_Channel4_5_6_7_IRQHandler /* DMA1 Channel 4, Channel 5, Channel 6 and Channel 7*/
- .word ADC1_COMP_IRQHandler /* ADC1, COMP1 and COMP2 */
- .word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
- .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
- .word TIM2_IRQHandler /* TIM2 */
- .word TIM3_IRQHandler /* TIM3 */
- .word TIM6_DAC_IRQHandler /* TIM6 and DAC */
- .word TIM7_IRQHandler /* TIM7 */
- .word TIM14_IRQHandler /* TIM14 */
- .word TIM15_IRQHandler /* TIM15 */
- .word TIM16_IRQHandler /* TIM16 */
- .word TIM17_IRQHandler /* TIM17 */
- .word I2C1_IRQHandler /* I2C1 */
- .word I2C2_IRQHandler /* I2C2 */
- .word SPI1_IRQHandler /* SPI1 */
- .word SPI2_IRQHandler /* SPI2 */
- .word USART1_IRQHandler /* USART1 */
- .word USART2_IRQHandler /* USART2 */
- .word USART3_4_IRQHandler /* USART3 and USART4 */
- .word CEC_CAN_IRQHandler /* CEC and CAN */
- .word USB_IRQHandler /* USB */
-
-/*******************************************************************************
-*
-* Provide weak aliases for each Exception handler to the Default_Handler.
-* As they are weak aliases, any function with the same name will override
-* this definition.
-*
-*******************************************************************************/
-
- .weak NMI_Handler
- .thumb_set NMI_Handler,Default_Handler
-
- .weak HardFault_Handler
- .thumb_set HardFault_Handler,Default_Handler
-
- .weak SVC_Handler
- .thumb_set SVC_Handler,Default_Handler
-
- .weak PendSV_Handler
- .thumb_set PendSV_Handler,Default_Handler
-
- .weak SysTick_Handler
- .thumb_set SysTick_Handler,Default_Handler
-
- .weak WWDG_IRQHandler
- .thumb_set WWDG_IRQHandler,Default_Handler
-
- .weak VDDIO2_IRQHandler
- .thumb_set VDDIO2_IRQHandler,Default_Handler
-
- .weak RTC_IRQHandler
- .thumb_set RTC_IRQHandler,Default_Handler
-
- .weak FLASH_IRQHandler
- .thumb_set FLASH_IRQHandler,Default_Handler
-
- .weak RCC_CRS_IRQHandler
- .thumb_set RCC_CRS_IRQHandler,Default_Handler
-
- .weak EXTI0_1_IRQHandler
- .thumb_set EXTI0_1_IRQHandler,Default_Handler
-
- .weak EXTI2_3_IRQHandler
- .thumb_set EXTI2_3_IRQHandler,Default_Handler
-
- .weak EXTI4_15_IRQHandler
- .thumb_set EXTI4_15_IRQHandler,Default_Handler
-
- .weak TSC_IRQHandler
- .thumb_set TSC_IRQHandler,Default_Handler
-
- .weak DMA1_Channel1_IRQHandler
- .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
-
- .weak DMA1_Channel2_3_IRQHandler
- .thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler
-
- .weak DMA1_Channel4_5_6_7_IRQHandler
- .thumb_set DMA1_Channel4_5_6_7_IRQHandler,Default_Handler
-
- .weak ADC1_COMP_IRQHandler
- .thumb_set ADC1_COMP_IRQHandler,Default_Handler
-
- .weak TIM1_BRK_UP_TRG_COM_IRQHandler
- .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
-
- .weak TIM1_CC_IRQHandler
- .thumb_set TIM1_CC_IRQHandler,Default_Handler
-
- .weak TIM2_IRQHandler
- .thumb_set TIM2_IRQHandler,Default_Handler
-
- .weak TIM3_IRQHandler
- .thumb_set TIM3_IRQHandler,Default_Handler
-
- .weak TIM6_DAC_IRQHandler
- .thumb_set TIM6_DAC_IRQHandler,Default_Handler
-
- .weak TIM7_IRQHandler
- .thumb_set TIM7_IRQHandler,Default_Handler
-
- .weak TIM14_IRQHandler
- .thumb_set TIM14_IRQHandler,Default_Handler
-
- .weak TIM15_IRQHandler
- .thumb_set TIM15_IRQHandler,Default_Handler
-
- .weak TIM16_IRQHandler
- .thumb_set TIM16_IRQHandler,Default_Handler
-
- .weak TIM17_IRQHandler
- .thumb_set TIM17_IRQHandler,Default_Handler
-
- .weak I2C1_IRQHandler
- .thumb_set I2C1_IRQHandler,Default_Handler
-
- .weak I2C2_IRQHandler
- .thumb_set I2C2_IRQHandler,Default_Handler
-
- .weak SPI1_IRQHandler
- .thumb_set SPI1_IRQHandler,Default_Handler
-
- .weak SPI2_IRQHandler
- .thumb_set SPI2_IRQHandler,Default_Handler
-
- .weak USART1_IRQHandler
- .thumb_set USART1_IRQHandler,Default_Handler
-
- .weak USART2_IRQHandler
- .thumb_set USART2_IRQHandler,Default_Handler
-
- .weak USART3_4_IRQHandler
- .thumb_set USART3_4_IRQHandler,Default_Handler
-
- .weak CEC_CAN_IRQHandler
- .thumb_set CEC_CAN_IRQHandler,Default_Handler
-
- .weak USB_IRQHandler
- .thumb_set USB_IRQHandler,Default_Handler
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
-
diff --git a/Blink/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f091xc.s b/Blink/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f091xc.s deleted file mode 100644 index 1e7d642..0000000 --- a/Blink/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f091xc.s +++ /dev/null @@ -1,290 +0,0 @@ -/**
- ******************************************************************************
- * @file startup_stm32f091xc.s
- * @author MCD Application Team
- * @brief STM32F091xC devices vector table for GCC toolchain.
- * This module performs:
- * - Set the initial SP
- * - Set the initial PC == Reset_Handler,
- * - Set the vector table entries with the exceptions ISR address
- * - Branches to main in the C library (which eventually
- * calls main()).
- * After Reset the Cortex-M0 processor is in Thread mode,
- * priority is Privileged, and the Stack is set to Main.
- ******************************************************************************
- * @attention
- *
- * <h2><center>© Copyright (c) 2016 STMicroelectronics.
- * All rights reserved.</center></h2>
- *
- * This software component is licensed by ST under BSD 3-Clause license,
- * the "License"; You may not use this file except in compliance with the
- * License. You may obtain a copy of the License at:
- * opensource.org/licenses/BSD-3-Clause
- *
- ******************************************************************************
- */
-
- .syntax unified
- .cpu cortex-m0
- .fpu softvfp
- .thumb
-
-.global g_pfnVectors
-.global Default_Handler
-
-/* start address for the initialization values of the .data section.
-defined in linker script */
-.word _sidata
-/* start address for the .data section. defined in linker script */
-.word _sdata
-/* end address for the .data section. defined in linker script */
-.word _edata
-/* start address for the .bss section. defined in linker script */
-.word _sbss
-/* end address for the .bss section. defined in linker script */
-.word _ebss
-
- .section .text.Reset_Handler
- .weak Reset_Handler
- .type Reset_Handler, %function
-Reset_Handler:
- ldr r0, =_estack
- mov sp, r0 /* set stack pointer */
-
-/* Copy the data segment initializers from flash to SRAM */
- ldr r0, =_sdata
- ldr r1, =_edata
- ldr r2, =_sidata
- movs r3, #0
- b LoopCopyDataInit
-
-CopyDataInit:
- ldr r4, [r2, r3]
- str r4, [r0, r3]
- adds r3, r3, #4
-
-LoopCopyDataInit:
- adds r4, r0, r3
- cmp r4, r1
- bcc CopyDataInit
-
-/* Zero fill the bss segment. */
- ldr r2, =_sbss
- ldr r4, =_ebss
- movs r3, #0
- b LoopFillZerobss
-
-FillZerobss:
- str r3, [r2]
- adds r2, r2, #4
-
-LoopFillZerobss:
- cmp r2, r4
- bcc FillZerobss
-
-/* Call the clock system intitialization function.*/
- bl SystemInit
-/* Call static constructors */
- bl __libc_init_array
-/* Call the application's entry point.*/
- bl main
-
-LoopForever:
- b LoopForever
-
-
-.size Reset_Handler, .-Reset_Handler
-
-/**
- * @brief This is the code that gets called when the processor receives an
- * unexpected interrupt. This simply enters an infinite loop, preserving
- * the system state for examination by a debugger.
- *
- * @param None
- * @retval : None
-*/
- .section .text.Default_Handler,"ax",%progbits
-Default_Handler:
-Infinite_Loop:
- b Infinite_Loop
- .size Default_Handler, .-Default_Handler
-/******************************************************************************
-*
-* The minimal vector table for a Cortex M0. Note that the proper constructs
-* must be placed on this to ensure that it ends up at physical address
-* 0x0000.0000.
-*
-******************************************************************************/
- .section .isr_vector,"a",%progbits
- .type g_pfnVectors, %object
- .size g_pfnVectors, .-g_pfnVectors
-
-
-g_pfnVectors:
- .word _estack
- .word Reset_Handler
- .word NMI_Handler
- .word HardFault_Handler
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word SVC_Handler
- .word 0
- .word 0
- .word PendSV_Handler
- .word SysTick_Handler
- .word WWDG_IRQHandler /* Window WatchDog */
- .word PVD_VDDIO2_IRQHandler /* PVD and VDDIO2 through EXTI Line detect */
- .word RTC_IRQHandler /* RTC through the EXTI line */
- .word FLASH_IRQHandler /* FLASH */
- .word RCC_CRS_IRQHandler /* RCC and CRS */
- .word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
- .word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
- .word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
- .word TSC_IRQHandler /* TSC */
- .word DMA1_Ch1_IRQHandler /* DMA1 Channel 1 */
- .word DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler /* DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2 */
- .word DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler /* DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5 */
- .word ADC1_COMP_IRQHandler /* ADC1, COMP1 and COMP2 */
- .word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
- .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
- .word TIM2_IRQHandler /* TIM2 */
- .word TIM3_IRQHandler /* TIM3 */
- .word TIM6_DAC_IRQHandler /* TIM6 and DAC */
- .word TIM7_IRQHandler /* TIM7 */
- .word TIM14_IRQHandler /* TIM14 */
- .word TIM15_IRQHandler /* TIM15 */
- .word TIM16_IRQHandler /* TIM16 */
- .word TIM17_IRQHandler /* TIM17 */
- .word I2C1_IRQHandler /* I2C1 */
- .word I2C2_IRQHandler /* I2C2 */
- .word SPI1_IRQHandler /* SPI1 */
- .word SPI2_IRQHandler /* SPI2 */
- .word USART1_IRQHandler /* USART1 */
- .word USART2_IRQHandler /* USART2 */
- .word USART3_8_IRQHandler /* USART3, USART4, USART5, USART6, USART7, USART8 */
- .word CEC_CAN_IRQHandler /* CEC and CAN */
-
-/*******************************************************************************
-*
-* Provide weak aliases for each Exception handler to the Default_Handler.
-* As they are weak aliases, any function with the same name will override
-* this definition.
-*
-*******************************************************************************/
-
- .weak NMI_Handler
- .thumb_set NMI_Handler,Default_Handler
-
- .weak HardFault_Handler
- .thumb_set HardFault_Handler,Default_Handler
-
- .weak SVC_Handler
- .thumb_set SVC_Handler,Default_Handler
-
- .weak PendSV_Handler
- .thumb_set PendSV_Handler,Default_Handler
-
- .weak SysTick_Handler
- .thumb_set SysTick_Handler,Default_Handler
-
- .weak WWDG_IRQHandler
- .thumb_set WWDG_IRQHandler,Default_Handler
-
- .weak PVD_VDDIO2_IRQHandler
- .thumb_set PVD_VDDIO2_IRQHandler,Default_Handler
-
- .weak RTC_IRQHandler
- .thumb_set RTC_IRQHandler,Default_Handler
-
- .weak FLASH_IRQHandler
- .thumb_set FLASH_IRQHandler,Default_Handler
-
- .weak RCC_CRS_IRQHandler
- .thumb_set RCC_CRS_IRQHandler,Default_Handler
-
- .weak EXTI0_1_IRQHandler
- .thumb_set EXTI0_1_IRQHandler,Default_Handler
-
- .weak EXTI2_3_IRQHandler
- .thumb_set EXTI2_3_IRQHandler,Default_Handler
-
- .weak EXTI4_15_IRQHandler
- .thumb_set EXTI4_15_IRQHandler,Default_Handler
-
- .weak TSC_IRQHandler
- .thumb_set TSC_IRQHandler,Default_Handler
-
- .weak DMA1_Ch1_IRQHandler
- .thumb_set DMA1_Ch1_IRQHandler,Default_Handler
-
- .weak DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
- .thumb_set DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler,Default_Handler
-
- .weak DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
- .thumb_set DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler,Default_Handler
-
- .weak ADC1_COMP_IRQHandler
- .thumb_set ADC1_COMP_IRQHandler,Default_Handler
-
- .weak TIM1_BRK_UP_TRG_COM_IRQHandler
- .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
-
- .weak TIM1_CC_IRQHandler
- .thumb_set TIM1_CC_IRQHandler,Default_Handler
-
- .weak TIM2_IRQHandler
- .thumb_set TIM2_IRQHandler,Default_Handler
-
- .weak TIM3_IRQHandler
- .thumb_set TIM3_IRQHandler,Default_Handler
-
- .weak TIM6_DAC_IRQHandler
- .thumb_set TIM6_DAC_IRQHandler,Default_Handler
-
- .weak TIM7_IRQHandler
- .thumb_set TIM7_IRQHandler,Default_Handler
-
- .weak TIM14_IRQHandler
- .thumb_set TIM14_IRQHandler,Default_Handler
-
- .weak TIM15_IRQHandler
- .thumb_set TIM15_IRQHandler,Default_Handler
-
- .weak TIM16_IRQHandler
- .thumb_set TIM16_IRQHandler,Default_Handler
-
- .weak TIM17_IRQHandler
- .thumb_set TIM17_IRQHandler,Default_Handler
-
- .weak I2C1_IRQHandler
- .thumb_set I2C1_IRQHandler,Default_Handler
-
- .weak I2C2_IRQHandler
- .thumb_set I2C2_IRQHandler,Default_Handler
-
- .weak SPI1_IRQHandler
- .thumb_set SPI1_IRQHandler,Default_Handler
-
- .weak SPI2_IRQHandler
- .thumb_set SPI2_IRQHandler,Default_Handler
-
- .weak USART1_IRQHandler
- .thumb_set USART1_IRQHandler,Default_Handler
-
- .weak USART2_IRQHandler
- .thumb_set USART2_IRQHandler,Default_Handler
-
- .weak USART3_8_IRQHandler
- .thumb_set USART3_8_IRQHandler,Default_Handler
-
- .weak CEC_CAN_IRQHandler
- .thumb_set CEC_CAN_IRQHandler,Default_Handler
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
-
diff --git a/Blink/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f098xx.s b/Blink/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f098xx.s deleted file mode 100644 index 5826c2f..0000000 --- a/Blink/Drivers/CMSIS/Device/ST/STM32F0xx/Source/Templates/gcc/startup_stm32f098xx.s +++ /dev/null @@ -1,290 +0,0 @@ -/**
- ******************************************************************************
- * @file startup_stm32f098xx.s
- * @author MCD Application Team
- * @brief STM32F098xx devices vector table for GCC toolchain.
- * This module performs:
- * - Set the initial SP
- * - Set the initial PC == Reset_Handler,
- * - Set the vector table entries with the exceptions ISR address
- * - Branches to main in the C library (which eventually
- * calls main()).
- * After Reset the Cortex-M0 processor is in Thread mode,
- * priority is Privileged, and the Stack is set to Main.
- ******************************************************************************
- * @attention
- *
- * <h2><center>© Copyright (c) 2016 STMicroelectronics.
- * All rights reserved.</center></h2>
- *
- * This software component is licensed by ST under BSD 3-Clause license,
- * the "License"; You may not use this file except in compliance with the
- * License. You may obtain a copy of the License at:
- * opensource.org/licenses/BSD-3-Clause
- *
- ******************************************************************************
- */
-
- .syntax unified
- .cpu cortex-m0
- .fpu softvfp
- .thumb
-
-.global g_pfnVectors
-.global Default_Handler
-
-/* start address for the initialization values of the .data section.
-defined in linker script */
-.word _sidata
-/* start address for the .data section. defined in linker script */
-.word _sdata
-/* end address for the .data section. defined in linker script */
-.word _edata
-/* start address for the .bss section. defined in linker script */
-.word _sbss
-/* end address for the .bss section. defined in linker script */
-.word _ebss
-
- .section .text.Reset_Handler
- .weak Reset_Handler
- .type Reset_Handler, %function
-Reset_Handler:
- ldr r0, =_estack
- mov sp, r0 /* set stack pointer */
-
-/* Copy the data segment initializers from flash to SRAM */
- ldr r0, =_sdata
- ldr r1, =_edata
- ldr r2, =_sidata
- movs r3, #0
- b LoopCopyDataInit
-
-CopyDataInit:
- ldr r4, [r2, r3]
- str r4, [r0, r3]
- adds r3, r3, #4
-
-LoopCopyDataInit:
- adds r4, r0, r3
- cmp r4, r1
- bcc CopyDataInit
-
-/* Zero fill the bss segment. */
- ldr r2, =_sbss
- ldr r4, =_ebss
- movs r3, #0
- b LoopFillZerobss
-
-FillZerobss:
- str r3, [r2]
- adds r2, r2, #4
-
-LoopFillZerobss:
- cmp r2, r4
- bcc FillZerobss
-
-/* Call the clock system intitialization function.*/
- bl SystemInit
-/* Call static constructors */
- bl __libc_init_array
-/* Call the application's entry point.*/
- bl main
-
-LoopForever:
- b LoopForever
-
-
-.size Reset_Handler, .-Reset_Handler
-
-/**
- * @brief This is the code that gets called when the processor receives an
- * unexpected interrupt. This simply enters an infinite loop, preserving
- * the system state for examination by a debugger.
- *
- * @param None
- * @retval : None
-*/
- .section .text.Default_Handler,"ax",%progbits
-Default_Handler:
-Infinite_Loop:
- b Infinite_Loop
- .size Default_Handler, .-Default_Handler
-/******************************************************************************
-*
-* The minimal vector table for a Cortex M0. Note that the proper constructs
-* must be placed on this to ensure that it ends up at physical address
-* 0x0000.0000.
-*
-******************************************************************************/
- .section .isr_vector,"a",%progbits
- .type g_pfnVectors, %object
- .size g_pfnVectors, .-g_pfnVectors
-
-
-g_pfnVectors:
- .word _estack
- .word Reset_Handler
- .word NMI_Handler
- .word HardFault_Handler
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word SVC_Handler
- .word 0
- .word 0
- .word PendSV_Handler
- .word SysTick_Handler
- .word WWDG_IRQHandler /* Window WatchDog */
- .word VDDIO2_IRQHandler /* VDDIO2 Monitor through EXTI Line 31 */
- .word RTC_IRQHandler /* RTC through the EXTI line */
- .word FLASH_IRQHandler /* FLASH */
- .word RCC_CRS_IRQHandler /* RCC and CRS */
- .word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
- .word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
- .word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
- .word TSC_IRQHandler /* TSC */
- .word DMA1_Ch1_IRQHandler /* DMA1 Channel 1 */
- .word DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler /* DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2 */
- .word DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler /* DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5 */
- .word ADC1_COMP_IRQHandler /* ADC1, COMP1 and COMP2 */
- .word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
- .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
- .word TIM2_IRQHandler /* TIM2 */
- .word TIM3_IRQHandler /* TIM3 */
- .word TIM6_DAC_IRQHandler /* TIM6 and DAC */
- .word TIM7_IRQHandler /* TIM7 */
- .word TIM14_IRQHandler /* TIM14 */
- .word TIM15_IRQHandler /* TIM15 */
- .word TIM16_IRQHandler /* TIM16 */
- .word TIM17_IRQHandler /* TIM17 */
- .word I2C1_IRQHandler /* I2C1 */
- .word I2C2_IRQHandler /* I2C2 */
- .word SPI1_IRQHandler /* SPI1 */
- .word SPI2_IRQHandler /* SPI2 */
- .word USART1_IRQHandler /* USART1 */
- .word USART2_IRQHandler /* USART2 */
- .word USART3_8_IRQHandler /* USART3, USART4, USART5, USART6, USART7, USART8 */
- .word CEC_CAN_IRQHandler /* CEC and CAN */
-
-/*******************************************************************************
-*
-* Provide weak aliases for each Exception handler to the Default_Handler.
-* As they are weak aliases, any function with the same name will override
-* this definition.
-*
-*******************************************************************************/
-
- .weak NMI_Handler
- .thumb_set NMI_Handler,Default_Handler
-
- .weak HardFault_Handler
- .thumb_set HardFault_Handler,Default_Handler
-
- .weak SVC_Handler
- .thumb_set SVC_Handler,Default_Handler
-
- .weak PendSV_Handler
- .thumb_set PendSV_Handler,Default_Handler
-
- .weak SysTick_Handler
- .thumb_set SysTick_Handler,Default_Handler
-
- .weak WWDG_IRQHandler
- .thumb_set WWDG_IRQHandler,Default_Handler
-
- .weak VDDIO2_IRQHandler
- .thumb_set VDDIO2_IRQHandler,Default_Handler
-
- .weak RTC_IRQHandler
- .thumb_set RTC_IRQHandler,Default_Handler
-
- .weak FLASH_IRQHandler
- .thumb_set FLASH_IRQHandler,Default_Handler
-
- .weak RCC_CRS_IRQHandler
- .thumb_set RCC_CRS_IRQHandler,Default_Handler
-
- .weak EXTI0_1_IRQHandler
- .thumb_set EXTI0_1_IRQHandler,Default_Handler
-
- .weak EXTI2_3_IRQHandler
- .thumb_set EXTI2_3_IRQHandler,Default_Handler
-
- .weak EXTI4_15_IRQHandler
- .thumb_set EXTI4_15_IRQHandler,Default_Handler
-
- .weak TSC_IRQHandler
- .thumb_set TSC_IRQHandler,Default_Handler
-
- .weak DMA1_Ch1_IRQHandler
- .thumb_set DMA1_Ch1_IRQHandler,Default_Handler
-
- .weak DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler
- .thumb_set DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler,Default_Handler
-
- .weak DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler
- .thumb_set DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler,Default_Handler
-
- .weak ADC1_COMP_IRQHandler
- .thumb_set ADC1_COMP_IRQHandler,Default_Handler
-
- .weak TIM1_BRK_UP_TRG_COM_IRQHandler
- .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
-
- .weak TIM1_CC_IRQHandler
- .thumb_set TIM1_CC_IRQHandler,Default_Handler
-
- .weak TIM2_IRQHandler
- .thumb_set TIM2_IRQHandler,Default_Handler
-
- .weak TIM3_IRQHandler
- .thumb_set TIM3_IRQHandler,Default_Handler
-
- .weak TIM6_DAC_IRQHandler
- .thumb_set TIM6_DAC_IRQHandler,Default_Handler
-
- .weak TIM7_IRQHandler
- .thumb_set TIM7_IRQHandler,Default_Handler
-
- .weak TIM14_IRQHandler
- .thumb_set TIM14_IRQHandler,Default_Handler
-
- .weak TIM15_IRQHandler
- .thumb_set TIM15_IRQHandler,Default_Handler
-
- .weak TIM16_IRQHandler
- .thumb_set TIM16_IRQHandler,Default_Handler
-
- .weak TIM17_IRQHandler
- .thumb_set TIM17_IRQHandler,Default_Handler
-
- .weak I2C1_IRQHandler
- .thumb_set I2C1_IRQHandler,Default_Handler
-
- .weak I2C2_IRQHandler
- .thumb_set I2C2_IRQHandler,Default_Handler
-
- .weak SPI1_IRQHandler
- .thumb_set SPI1_IRQHandler,Default_Handler
-
- .weak SPI2_IRQHandler
- .thumb_set SPI2_IRQHandler,Default_Handler
-
- .weak USART1_IRQHandler
- .thumb_set USART1_IRQHandler,Default_Handler
-
- .weak USART2_IRQHandler
- .thumb_set USART2_IRQHandler,Default_Handler
-
- .weak USART3_8_IRQHandler
- .thumb_set USART3_8_IRQHandler,Default_Handler
-
- .weak CEC_CAN_IRQHandler
- .thumb_set CEC_CAN_IRQHandler,Default_Handler
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
-
|