Move firmware into subdirectory

1 files changed, 0 insertions, 609 deletions

diff --git a/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_ll_rcc.c b/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_ll_rcc.c
deleted file mode 100644
index 83fe3e5..0000000
--- a/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_ll_rcc.c
+++ /dev/null
@@ -1,609 +0,0 @@
-/**

-  ******************************************************************************

-  * @file    stm32f0xx_ll_rcc.c

-  * @author  MCD Application Team

-  * @brief   RCC LL module driver.

-  ******************************************************************************

-  * @attention

-  *

-  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.

-  * All rights reserved.</center></h2>

-  *

-  * This software component is licensed by ST under BSD 3-Clause license,

-  * the "License"; You may not use this file except in compliance with the

-  * License. You may obtain a copy of the License at:

-  *                        opensource.org/licenses/BSD-3-Clause

-  *

-  ******************************************************************************

-  */

-

-#if defined(USE_FULL_LL_DRIVER)

-

-/* Includes ------------------------------------------------------------------*/

-#include "stm32f0xx_ll_rcc.h"

-#ifdef  USE_FULL_ASSERT

-  #include "stm32_assert.h"

-#else

-  #define assert_param(expr) ((void)0U)

-#endif /* USE_FULL_ASSERT */

-/** @addtogroup STM32F0xx_LL_Driver

-  * @{

-  */

-

-#if defined(RCC)

-

-/** @defgroup RCC_LL RCC

-  * @{

-  */

-

-/* Private types -------------------------------------------------------------*/

-/* Private variables ---------------------------------------------------------*/

-

-/* Private constants ---------------------------------------------------------*/

-/* Private macros ------------------------------------------------------------*/

-/** @addtogroup RCC_LL_Private_Macros

-  * @{

-  */

-#if defined(RCC_CFGR3_USART2SW) && defined(RCC_CFGR3_USART3SW)

-#define IS_LL_RCC_USART_CLKSOURCE(__VALUE__)  (((__VALUE__) == LL_RCC_USART1_CLKSOURCE) \

-                                            || ((__VALUE__) == LL_RCC_USART2_CLKSOURCE) \

-                                            || ((__VALUE__) == LL_RCC_USART3_CLKSOURCE))

-#elif defined(RCC_CFGR3_USART2SW) && !defined(RCC_CFGR3_USART3SW)

-#define IS_LL_RCC_USART_CLKSOURCE(__VALUE__)  (((__VALUE__) == LL_RCC_USART1_CLKSOURCE) \

-                                            || ((__VALUE__) == LL_RCC_USART2_CLKSOURCE))

-#elif defined(RCC_CFGR3_USART3SW) && !defined(RCC_CFGR3_USART2SW)

-#define IS_LL_RCC_USART_CLKSOURCE(__VALUE__)  (((__VALUE__) == LL_RCC_USART1_CLKSOURCE) \

-                                            || ((__VALUE__) == LL_RCC_USART3_CLKSOURCE))

-#else

-#define IS_LL_RCC_USART_CLKSOURCE(__VALUE__)  (((__VALUE__) == LL_RCC_USART1_CLKSOURCE))

-#endif /* RCC_CFGR3_USART2SW && RCC_CFGR3_USART3SW */

-

-#define IS_LL_RCC_I2C_CLKSOURCE(__VALUE__)     ((__VALUE__) == LL_RCC_I2C1_CLKSOURCE)

-

-#if defined(USB)

-#define IS_LL_RCC_USB_CLKSOURCE(__VALUE__)    (((__VALUE__) == LL_RCC_USB_CLKSOURCE))

-#endif /* USB */

-

-#if defined(CEC)

-#define IS_LL_RCC_CEC_CLKSOURCE(__VALUE__)    (((__VALUE__) == LL_RCC_CEC_CLKSOURCE))

-#endif /* CEC */

-

-/**

-  * @}

-  */

-

-/* Private function prototypes -----------------------------------------------*/

-/** @defgroup RCC_LL_Private_Functions RCC Private functions

-  * @{

-  */

-uint32_t RCC_GetSystemClockFreq(void);

-uint32_t RCC_GetHCLKClockFreq(uint32_t SYSCLK_Frequency);

-uint32_t RCC_GetPCLK1ClockFreq(uint32_t HCLK_Frequency);

-uint32_t RCC_PLL_GetFreqDomain_SYS(void);

-/**

-  * @}

-  */

-

-

-/* Exported functions --------------------------------------------------------*/

-/** @addtogroup RCC_LL_Exported_Functions

-  * @{

-  */

-

-/** @addtogroup RCC_LL_EF_Init

-  * @{

-  */

-

-/**

-  * @brief  Reset the RCC clock configuration to the default reset state.

-  * @note   The default reset state of the clock configuration is given below:

-  *         - HSI ON and used as system clock source

-  *         - HSE and PLL OFF

-  *         - AHB and APB1 prescaler set to 1.

-  *         - CSS, MCO OFF

-  *         - All interrupts disabled

-  * @note   This function doesn't modify the configuration of the

-  *         - Peripheral clocks

-  *         - LSI, LSE and RTC clocks

-  * @retval An ErrorStatus enumeration value:

-  *          - SUCCESS: RCC registers are de-initialized

-  *          - ERROR: not applicable

-  */

-ErrorStatus LL_RCC_DeInit(void)

-{

-  __IO uint32_t vl_mask;

-

-  /* Set HSION bit */

-  LL_RCC_HSI_Enable();

-

-  /* Wait for HSI READY bit */

-  while(LL_RCC_HSI_IsReady() != 1U)

-  {}

-

-  /* Set HSITRIM bits to the reset value*/

-  LL_RCC_HSI_SetCalibTrimming(0x10U);

-

-  /* Reset SW, HPRE, PPRE and MCOSEL bits */

-  vl_mask = 0xFFFFFFFFU;

-  CLEAR_BIT(vl_mask, (RCC_CFGR_SW | RCC_CFGR_HPRE | RCC_CFGR_PPRE | RCC_CFGR_MCOSEL));

-  

-  /* Write new value in CFGR register */

-  LL_RCC_WriteReg(CFGR, vl_mask);

-

-  /* Wait till system clock source is ready */

-  while(LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_HSI)

-  {}

-

-  /* Read CR register */

-  vl_mask = LL_RCC_ReadReg(CR);

-

-  /* Reset HSEON, CSSON, PLLON bits */

-  CLEAR_BIT(vl_mask, (RCC_CR_PLLON | RCC_CR_CSSON | RCC_CR_HSEON));

-  

-  /* Write new value in CR register */

-  LL_RCC_WriteReg(CR, vl_mask);

-

-  /* Wait for PLL READY bit to be reset */

-  while(LL_RCC_PLL_IsReady() != 0U)

-  {}

-

-  /* Reset HSEBYP bit */

-  LL_RCC_HSE_DisableBypass();

-

-  /* Reset CFGR register */

-  LL_RCC_WriteReg(CFGR, 0x00000000U);

-

-#if defined(RCC_HSI48_SUPPORT)

-  /* Reset CR2 register */

-  LL_RCC_WriteReg(CR2, 0x00000000U);

-

-  /* Disable HSI48 */

-  LL_RCC_HSI48_Disable();

-

-#endif /*RCC_HSI48_SUPPORT*/

-  /* Set HSI14TRIM/HSI14ON/HSI14DIS bits to the reset value*/

-  LL_RCC_HSI14_SetCalibTrimming(0x10U);

-  LL_RCC_HSI14_Disable();

-  LL_RCC_HSI14_EnableADCControl();

-

-  /* Reset CFGR2 register */

-  LL_RCC_WriteReg(CFGR2, 0x00000000U);

-

-  /* Reset CFGR3 register */

-  LL_RCC_WriteReg(CFGR3, 0x00000000U);

-

-  /* Clear pending flags */

-#if defined(RCC_HSI48_SUPPORT)

-  vl_mask = (LL_RCC_CIR_LSIRDYC | LL_RCC_CIR_LSERDYC | LL_RCC_CIR_HSIRDYC | LL_RCC_CIR_HSERDYC |\

-             LL_RCC_CIR_PLLRDYC | LL_RCC_CIR_HSI14RDYC | LL_RCC_CIR_HSI48RDYC | LL_RCC_CIR_CSSC);

-#else

-  vl_mask = (LL_RCC_CIR_LSIRDYC | LL_RCC_CIR_LSERDYC | LL_RCC_CIR_HSIRDYC | LL_RCC_CIR_HSERDYC |\

-             LL_RCC_CIR_PLLRDYC | LL_RCC_CIR_HSI14RDYC | LL_RCC_CIR_CSSC);

-#endif /* RCC_HSI48_SUPPORT */

-

-  /* Write new value in CIR register */

-  LL_RCC_WriteReg(CIR, vl_mask);

-

-  /* Disable all interrupts */

-  LL_RCC_WriteReg(CIR, 0x00000000U);

-  

-  /* Clear reset flags */

-  LL_RCC_ClearResetFlags();

-

-  return SUCCESS;

-}

-

-/**

-  * @}

-  */

-

-/** @addtogroup RCC_LL_EF_Get_Freq

-  * @brief  Return the frequencies of different on chip clocks;  System, AHB and APB1 buses clocks

-  *         and different peripheral clocks available on the device.

-  * @note   If SYSCLK source is HSI, function returns values based on HSI_VALUE(**)

-  * @note   If SYSCLK source is HSE, function returns values based on HSE_VALUE(***)

-  * @note   If SYSCLK source is PLL, function returns values based on 

-  *         HSI_VALUE(**) or HSE_VALUE(***) multiplied/divided by the PLL factors.

-  * @note   (**) HSI_VALUE is a defined constant but the real value may vary 

-  *              depending on the variations in voltage and temperature.

-  * @note   (***) HSE_VALUE is a defined constant, user has to ensure that

-  *               HSE_VALUE is same as the real frequency of the crystal used.

-  *               Otherwise, this function may have wrong result.

-  * @note   The result of this function could be incorrect when using fractional

-  *         value for HSE crystal.

-  * @note   This function can be used by the user application to compute the

-  *         baud-rate for the communication peripherals or configure other parameters.

-  * @{

-  */

-

-/**

-  * @brief  Return the frequencies of different on chip clocks;  System, AHB and APB1 buses clocks

-  * @note   Each time SYSCLK, HCLK and/or PCLK1 clock changes, this function

-  *         must be called to update structure fields. Otherwise, any

-  *         configuration based on this function will be incorrect.

-  * @param  RCC_Clocks pointer to a @ref LL_RCC_ClocksTypeDef structure which will hold the clocks frequencies

-  * @retval None

-  */

-void LL_RCC_GetSystemClocksFreq(LL_RCC_ClocksTypeDef *RCC_Clocks)

-{

-  /* Get SYSCLK frequency */

-  RCC_Clocks->SYSCLK_Frequency = RCC_GetSystemClockFreq();

-

-  /* HCLK clock frequency */

-  RCC_Clocks->HCLK_Frequency   = RCC_GetHCLKClockFreq(RCC_Clocks->SYSCLK_Frequency);

-

-  /* PCLK1 clock frequency */

-  RCC_Clocks->PCLK1_Frequency  = RCC_GetPCLK1ClockFreq(RCC_Clocks->HCLK_Frequency);

-}

-

-/**

-  * @brief  Return USARTx clock frequency

-  * @param  USARTxSource This parameter can be one of the following values:

-  *         @arg @ref LL_RCC_USART1_CLKSOURCE

-  *         @arg @ref LL_RCC_USART2_CLKSOURCE (*)

-  *         @arg @ref LL_RCC_USART3_CLKSOURCE (*)

-  *

-  *         (*) value not defined in all devices.

-  * @retval USART clock frequency (in Hz)

-  *         @arg @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator (HSI or LSE) is not ready

-  */

-uint32_t LL_RCC_GetUSARTClockFreq(uint32_t USARTxSource)

-{

-  uint32_t usart_frequency = LL_RCC_PERIPH_FREQUENCY_NO;

-

-  /* Check parameter */

-  assert_param(IS_LL_RCC_USART_CLKSOURCE(USARTxSource));

-#if defined(RCC_CFGR3_USART1SW)

-  if (USARTxSource == LL_RCC_USART1_CLKSOURCE)

-  {

-    /* USART1CLK clock frequency */

-    switch (LL_RCC_GetUSARTClockSource(USARTxSource))

-    {

-      case LL_RCC_USART1_CLKSOURCE_SYSCLK: /* USART1 Clock is System Clock */

-        usart_frequency = RCC_GetSystemClockFreq();

-        break;

-

-      case LL_RCC_USART1_CLKSOURCE_HSI:    /* USART1 Clock is HSI Osc. */

-        if (LL_RCC_HSI_IsReady())

-        {

-          usart_frequency = HSI_VALUE;

-        }

-        break;

-

-      case LL_RCC_USART1_CLKSOURCE_LSE:    /* USART1 Clock is LSE Osc. */

-        if (LL_RCC_LSE_IsReady())

-        {

-          usart_frequency = LSE_VALUE;

-        }

-        break;

-

-      case LL_RCC_USART1_CLKSOURCE_PCLK1:  /* USART1 Clock is PCLK1 */

-      default:

-        usart_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq()));

-        break;

-    }

-  }

-#endif /* RCC_CFGR3_USART1SW  */

-

-#if defined(RCC_CFGR3_USART2SW)

-  if (USARTxSource == LL_RCC_USART2_CLKSOURCE)

-  {

-    /* USART2CLK clock frequency */

-    switch (LL_RCC_GetUSARTClockSource(USARTxSource))

-    {

-      case LL_RCC_USART2_CLKSOURCE_SYSCLK: /* USART2 Clock is System Clock */

-        usart_frequency = RCC_GetSystemClockFreq();

-        break;

-

-      case LL_RCC_USART2_CLKSOURCE_HSI:    /* USART2 Clock is HSI Osc. */

-        if (LL_RCC_HSI_IsReady())

-        {

-          usart_frequency = HSI_VALUE;

-        }

-        break;

-

-      case LL_RCC_USART2_CLKSOURCE_LSE:    /* USART2 Clock is LSE Osc. */

-        if (LL_RCC_LSE_IsReady())

-        {

-          usart_frequency = LSE_VALUE;

-        }

-        break;

-

-      case LL_RCC_USART2_CLKSOURCE_PCLK1:  /* USART2 Clock is PCLK1 */

-      default:

-        usart_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq()));

-        break;

-    }

-  }

-#endif /* RCC_CFGR3_USART2SW */

-

-#if defined(RCC_CFGR3_USART3SW)

-  if (USARTxSource == LL_RCC_USART3_CLKSOURCE)

-  {

-    /* USART3CLK clock frequency */

-    switch (LL_RCC_GetUSARTClockSource(USARTxSource))

-    {

-      case LL_RCC_USART3_CLKSOURCE_SYSCLK: /* USART3 Clock is System Clock */

-        usart_frequency = RCC_GetSystemClockFreq();

-        break;

-

-      case LL_RCC_USART3_CLKSOURCE_HSI:    /* USART3 Clock is HSI Osc. */

-        if (LL_RCC_HSI_IsReady())

-        {

-          usart_frequency = HSI_VALUE;

-        }

-        break;

-

-      case LL_RCC_USART3_CLKSOURCE_LSE:    /* USART3 Clock is LSE Osc. */

-        if (LL_RCC_LSE_IsReady())

-        {

-          usart_frequency = LSE_VALUE;

-        }

-        break;

-

-      case LL_RCC_USART3_CLKSOURCE_PCLK1:  /* USART3 Clock is PCLK1 */

-      default:

-        usart_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq()));

-        break;

-    }

-  }

-

-#endif /* RCC_CFGR3_USART3SW */

-  return usart_frequency;

-}

-

-/**

-  * @brief  Return I2Cx clock frequency

-  * @param  I2CxSource This parameter can be one of the following values:

-  *         @arg @ref LL_RCC_I2C1_CLKSOURCE

-  * @retval I2C clock frequency (in Hz)

-  *         @arg @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that HSI oscillator is not ready

-  */

-uint32_t LL_RCC_GetI2CClockFreq(uint32_t I2CxSource)

-{

-  uint32_t i2c_frequency = LL_RCC_PERIPH_FREQUENCY_NO;

-

-  /* Check parameter */

-  assert_param(IS_LL_RCC_I2C_CLKSOURCE(I2CxSource));

-

-  /* I2C1 CLK clock frequency */

-  if (I2CxSource == LL_RCC_I2C1_CLKSOURCE)

-  {

-    switch (LL_RCC_GetI2CClockSource(I2CxSource))

-    {

-      case LL_RCC_I2C1_CLKSOURCE_SYSCLK: /* I2C1 Clock is System Clock */

-        i2c_frequency = RCC_GetSystemClockFreq();

-        break;

-

-      case LL_RCC_I2C1_CLKSOURCE_HSI:    /* I2C1 Clock is HSI Osc. */

-      default:

-        if (LL_RCC_HSI_IsReady())

-        {

-          i2c_frequency = HSI_VALUE;

-        }

-        break;

-    }

-  }

-

-  return i2c_frequency;

-}

-

-#if defined(USB)

-/**

-  * @brief  Return USBx clock frequency

-  * @param  USBxSource This parameter can be one of the following values:

-  *         @arg @ref LL_RCC_USB_CLKSOURCE

-  * @retval USB clock frequency (in Hz)

-  *         @arg @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator (HSI48) or PLL is not ready

-  *         @arg @ref LL_RCC_PERIPH_FREQUENCY_NA indicates that no clock source selected

-  */

-uint32_t LL_RCC_GetUSBClockFreq(uint32_t USBxSource)

-{

-  uint32_t usb_frequency = LL_RCC_PERIPH_FREQUENCY_NO;

-

-  /* Check parameter */

-  assert_param(IS_LL_RCC_USB_CLKSOURCE(USBxSource));

-

-  /* USBCLK clock frequency */

-  switch (LL_RCC_GetUSBClockSource(USBxSource))

-  {

-    case LL_RCC_USB_CLKSOURCE_PLL:        /* PLL clock used as USB clock source */

-      if (LL_RCC_PLL_IsReady())

-      {

-        usb_frequency = RCC_PLL_GetFreqDomain_SYS();

-      }

-      break;

-

-#if defined(RCC_CFGR3_USBSW_HSI48)

-    case LL_RCC_USB_CLKSOURCE_HSI48:      /* HSI48 clock used as USB clock source */

-    default:

-      if (LL_RCC_HSI48_IsReady())

-      {

-        usb_frequency = HSI48_VALUE;

-      }

-      break;

-#else

-    case LL_RCC_USB_CLKSOURCE_NONE:       /* No clock used as USB clock source */

-    default:

-      usb_frequency = LL_RCC_PERIPH_FREQUENCY_NA;

-      break;

-#endif /* RCC_CFGR3_USBSW_HSI48 */

-  }

-

-  return usb_frequency;

-}

-#endif /* USB */

-

-#if defined(CEC)

-/**

-  * @brief  Return CECx clock frequency

-  * @param  CECxSource This parameter can be one of the following values:

-  *         @arg @ref LL_RCC_CEC_CLKSOURCE

-  * @retval CEC clock frequency (in Hz)

-  *        @arg @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillators (HSI or LSE) are not ready

-  */

-uint32_t LL_RCC_GetCECClockFreq(uint32_t CECxSource)

-{

-  uint32_t cec_frequency = LL_RCC_PERIPH_FREQUENCY_NO;

-

-  /* Check parameter */

-  assert_param(IS_LL_RCC_CEC_CLKSOURCE(CECxSource));

-

-  /* CECCLK clock frequency */

-  switch (LL_RCC_GetCECClockSource(CECxSource))

-  {

-    case LL_RCC_CEC_CLKSOURCE_HSI_DIV244:   /* HSI / 244 clock used as CEC clock source */

-      if (LL_RCC_HSI_IsReady())

-      {

-        cec_frequency = HSI_VALUE / 244U;

-      }

-      break;

-

-    case LL_RCC_CEC_CLKSOURCE_LSE:          /* LSE clock used as CEC clock source */

-    default:

-      if (LL_RCC_LSE_IsReady())

-      {

-        cec_frequency = LSE_VALUE;

-      }

-      break;

-  }

-

-  return cec_frequency;

-}

-#endif /* CEC */

-

-/**

-  * @}

-  */

-

-/**

-  * @}

-  */

-

-/** @addtogroup RCC_LL_Private_Functions

-  * @{

-  */

-

-/**

-  * @brief  Return SYSTEM clock frequency

-  * @retval SYSTEM clock frequency (in Hz)

-  */

-uint32_t RCC_GetSystemClockFreq(void)

-{

-  uint32_t frequency = 0U;

-

-  /* Get SYSCLK source -------------------------------------------------------*/

-  switch (LL_RCC_GetSysClkSource())

-  {

-    case LL_RCC_SYS_CLKSOURCE_STATUS_HSI:  /* HSI used as system clock  source */

-      frequency = HSI_VALUE;

-      break;

-

-    case LL_RCC_SYS_CLKSOURCE_STATUS_HSE:  /* HSE used as system clock  source */

-      frequency = HSE_VALUE;

-      break;

-

-    case LL_RCC_SYS_CLKSOURCE_STATUS_PLL:  /* PLL used as system clock  source */

-      frequency = RCC_PLL_GetFreqDomain_SYS();

-      break;

-

-#if defined(RCC_HSI48_SUPPORT)

-    case LL_RCC_SYS_CLKSOURCE_STATUS_HSI48:/* HSI48 used as system clock  source */

-      frequency = HSI48_VALUE;

-      break;

-#endif /* RCC_HSI48_SUPPORT */

-

-    default:

-      frequency = HSI_VALUE;

-      break;

-  }

-

-  return frequency;

-}

-

-/**

-  * @brief  Return HCLK clock frequency

-  * @param  SYSCLK_Frequency SYSCLK clock frequency

-  * @retval HCLK clock frequency (in Hz)

-  */

-uint32_t RCC_GetHCLKClockFreq(uint32_t SYSCLK_Frequency)

-{

-  /* HCLK clock frequency */

-  return __LL_RCC_CALC_HCLK_FREQ(SYSCLK_Frequency, LL_RCC_GetAHBPrescaler());

-}

-

-/**

-  * @brief  Return PCLK1 clock frequency

-  * @param  HCLK_Frequency HCLK clock frequency

-  * @retval PCLK1 clock frequency (in Hz)

-  */

-uint32_t RCC_GetPCLK1ClockFreq(uint32_t HCLK_Frequency)

-{

-  /* PCLK1 clock frequency */

-  return __LL_RCC_CALC_PCLK1_FREQ(HCLK_Frequency, LL_RCC_GetAPB1Prescaler());

-}

-/**

-  * @brief  Return PLL clock frequency used for system domain

-  * @retval PLL clock frequency (in Hz)

-  */

-uint32_t RCC_PLL_GetFreqDomain_SYS(void)

-{

-  uint32_t pllinputfreq = 0U, pllsource = 0U;

-

-  /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLL divider) * PLL Multiplicator */

-

-  /* Get PLL source */

-  pllsource = LL_RCC_PLL_GetMainSource();

-

-  switch (pllsource)

-  {

-#if defined(RCC_PLLSRC_PREDIV1_SUPPORT)

-    case LL_RCC_PLLSOURCE_HSI:       /* HSI used as PLL clock source */

-      pllinputfreq = HSI_VALUE;

-#else

-    case LL_RCC_PLLSOURCE_HSI_DIV_2: /* HSI used as PLL clock source */

-      pllinputfreq = HSI_VALUE / 2U;

-#endif /* RCC_PLLSRC_PREDIV1_SUPPORT */

-      break;

-

-#if defined(RCC_HSI48_SUPPORT)

-    case LL_RCC_PLLSOURCE_HSI48:     /* HSI48 used as PLL clock source */

-      pllinputfreq = HSI48_VALUE;

-      break;

-#endif /* RCC_HSI48_SUPPORT */

-

-    case LL_RCC_PLLSOURCE_HSE:       /* HSE used as PLL clock source */

-      pllinputfreq = HSE_VALUE;

-      break;

-

-    default:

-#if defined(RCC_PLLSRC_PREDIV1_SUPPORT)

-      pllinputfreq = HSI_VALUE;

-#else

-      pllinputfreq = HSI_VALUE / 2U;

-#endif /* RCC_PLLSRC_PREDIV1_SUPPORT */

-      break;

-  }

-#if defined(RCC_PLLSRC_PREDIV1_SUPPORT)

-  return __LL_RCC_CALC_PLLCLK_FREQ(pllinputfreq, LL_RCC_PLL_GetMultiplicator(), LL_RCC_PLL_GetPrediv());

-#else

-  return __LL_RCC_CALC_PLLCLK_FREQ((pllinputfreq / (LL_RCC_PLL_GetPrediv() + 1U)), LL_RCC_PLL_GetMultiplicator());

-#endif /* RCC_PLLSRC_PREDIV1_SUPPORT */

-}

-/**

-  * @}

-  */

-

-/**

-  * @}

-  */

-

-#endif /* defined(RCC) */

-

-/**

-  * @}

-  */

-

-#endif /* USE_FULL_LL_DRIVER */

-

-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/