Move firmware into subdirectory

1 files changed, 0 insertions, 204 deletions

diff --git a/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_smartcard_ex.c b/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_smartcard_ex.c
deleted file mode 100644
index 8f60497..0000000
--- a/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_smartcard_ex.c
+++ /dev/null
@@ -1,204 +0,0 @@
-/**

-  ******************************************************************************

-  * @file    stm32f0xx_hal_smartcard_ex.c

-  * @author  MCD Application Team

-  * @brief   SMARTCARD HAL module driver.

-  *          This file provides extended firmware functions to manage the following

-  *          functionalities of the SmartCard.

-  *           + Initialization and de-initialization functions

-  *           + Peripheral Control functions

-  *

-  @verbatim

-  =============================================================================

-               ##### SMARTCARD peripheral extended features  #####

-  =============================================================================

-  [..]

-  The Extended SMARTCARD HAL driver can be used as follows:

-

-    (#) After having configured the SMARTCARD basic features with HAL_SMARTCARD_Init(),

-        then program SMARTCARD advanced features if required (TX/RX pins swap, TimeOut,

-        auto-retry counter,...) in the hsmartcard AdvancedInit structure.

-  @endverbatim

-  ******************************************************************************

-  * @attention

-  *

-  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.

-  * All rights reserved.</center></h2>

-  *

-  * This software component is licensed by ST under BSD 3-Clause license,

-  * the "License"; You may not use this file except in compliance with the

-  * License. You may obtain a copy of the License at:

-  *                        opensource.org/licenses/BSD-3-Clause

-  *

-  ******************************************************************************

-  */

-#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)

-/* Includes ------------------------------------------------------------------*/

-#include "stm32f0xx_hal.h"

-

-/** @addtogroup STM32F0xx_HAL_Driver

-  * @{

-  */

-

-/** @defgroup SMARTCARDEx SMARTCARDEx

-  * @brief SMARTCARD Extended HAL module driver

-  * @{

-  */

-#ifdef HAL_SMARTCARD_MODULE_ENABLED

-

-/* Private typedef -----------------------------------------------------------*/

-/* Private define ------------------------------------------------------------*/

-/* Private macros ------------------------------------------------------------*/

-/* Private variables ---------------------------------------------------------*/

-/* Private function prototypes -----------------------------------------------*/

-/* Exported functions --------------------------------------------------------*/

-/** @defgroup SMARTCARDEx_Exported_Functions  SMARTCARD Extended Exported Functions

-  * @{

-  */

-

-/** @defgroup SMARTCARDEx_Exported_Functions_Group1 Extended Peripheral Control functions

-  * @brief    Extended control functions

-  *

-@verbatim

-  ===============================================================================

-                      ##### Peripheral Control functions #####

-  ===============================================================================

-  [..]

-  This subsection provides a set of functions allowing to initialize the SMARTCARD.

-     (+) HAL_SMARTCARDEx_BlockLength_Config() API allows to configure the Block Length on the fly

-     (+) HAL_SMARTCARDEx_TimeOut_Config() API allows to configure the receiver timeout value on the fly

-     (+) HAL_SMARTCARDEx_EnableReceiverTimeOut() API enables the receiver timeout feature

-     (+) HAL_SMARTCARDEx_DisableReceiverTimeOut() API disables the receiver timeout feature

-

-@endverbatim

-  * @{

-  */

-

-/** @brief Update on the fly the SMARTCARD block length in RTOR register.

-  * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains

-  *                    the configuration information for the specified SMARTCARD module.

-  * @param BlockLength SMARTCARD block length (8-bit long at most)

-  * @retval None

-  */

-void HAL_SMARTCARDEx_BlockLength_Config(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t BlockLength)

-{

-  MODIFY_REG(hsmartcard->Instance->RTOR, USART_RTOR_BLEN, ((uint32_t)BlockLength << USART_RTOR_BLEN_Pos));

-}

-

-/** @brief Update on the fly the receiver timeout value in RTOR register.

-  * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains

-  *                    the configuration information for the specified SMARTCARD module.

-  * @param TimeOutValue receiver timeout value in number of baud blocks. The timeout

-  *                     value must be less or equal to 0x0FFFFFFFF.

-  * @retval None

-  */

-void HAL_SMARTCARDEx_TimeOut_Config(SMARTCARD_HandleTypeDef *hsmartcard, uint32_t TimeOutValue)

-{

-  assert_param(IS_SMARTCARD_TIMEOUT_VALUE(hsmartcard->Init.TimeOutValue));

-  MODIFY_REG(hsmartcard->Instance->RTOR, USART_RTOR_RTO, TimeOutValue);

-}

-

-/** @brief Enable the SMARTCARD receiver timeout feature.

-  * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains

-  *                    the configuration information for the specified SMARTCARD module.

-  * @retval HAL status

-  */

-HAL_StatusTypeDef HAL_SMARTCARDEx_EnableReceiverTimeOut(SMARTCARD_HandleTypeDef *hsmartcard)

-{

-  if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY)

-  {

-    /* Process Locked */

-    __HAL_LOCK(hsmartcard);

-

-    hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY;

-

-    /* Set the USART RTOEN bit */

-    SET_BIT(hsmartcard->Instance->CR2, USART_CR2_RTOEN);

-

-    hsmartcard->gState = HAL_SMARTCARD_STATE_READY;

-

-    /* Process Unlocked */

-    __HAL_UNLOCK(hsmartcard);

-

-    return HAL_OK;

-  }

-  else

-  {

-    return HAL_BUSY;

-  }

-}

-

-/** @brief Disable the SMARTCARD receiver timeout feature.

-  * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains

-  *                    the configuration information for the specified SMARTCARD module.

-  * @retval HAL status

-  */

-HAL_StatusTypeDef HAL_SMARTCARDEx_DisableReceiverTimeOut(SMARTCARD_HandleTypeDef *hsmartcard)

-{

-  if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY)

-  {

-    /* Process Locked */

-    __HAL_LOCK(hsmartcard);

-

-    hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY;

-

-    /* Clear the USART RTOEN bit */

-    CLEAR_BIT(hsmartcard->Instance->CR2, USART_CR2_RTOEN);

-

-    hsmartcard->gState = HAL_SMARTCARD_STATE_READY;

-

-    /* Process Unlocked */

-    __HAL_UNLOCK(hsmartcard);

-

-    return HAL_OK;

-  }

-  else

-  {

-    return HAL_BUSY;

-  }

-}

-

-/**

-  * @}

-  */

-

-/** @defgroup SMARTCARDEx_Exported_Functions_Group2 Extended Peripheral IO operation functions

-  * @brief   SMARTCARD Transmit and Receive functions

-  *

-@verbatim

- ===============================================================================

-                      ##### IO operation functions #####

- ===============================================================================

-    [..]

-@endverbatim

-  * @{

-  */

-

-/**

-  * @}

-  */

-

-

-/**

-  * @}

-  */

-

-/** @defgroup SMARTCARDEx_Private_Functions  SMARTCARD Extended Private Functions

-  * @{

-  */

-

-/**

-  * @}

-  */

-

-#endif /* HAL_SMARTCARD_MODULE_ENABLED */

-

-/**

-  * @}

-  */

-

-/**

-  * @}

-  */

-#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)  */

-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/