Move firmware into subdirectory

1 files changed, 0 insertions, 1600 deletions

diff --git a/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rtc_ex.c b/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rtc_ex.c
deleted file mode 100644
index 59888c1..0000000
--- a/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_rtc_ex.c
+++ /dev/null
@@ -1,1600 +0,0 @@
-/**

-  ******************************************************************************

-  * @file    stm32f0xx_hal_rtc_ex.c

-  * @author  MCD Application Team

-  * @brief   Extended RTC HAL module driver.

-  *          This file provides firmware functions to manage the following

-  *          functionalities of the Real Time Clock (RTC) Extended peripheral:

-  *           + RTC Time Stamp functions

-  *           + RTC Tamper functions

-  *           + RTC Wake-up functions

-  *           + Extended Control functions

-  *           + Extended RTC features functions

-  *

-  @verbatim

-  ==============================================================================

-                  ##### How to use this driver #####

-  ==============================================================================

-  [..]

-    (+) Enable the RTC domain access.

-        (+) Configure the RTC Prescaler (Asynchronous and Synchronous) and RTC hour

-            format using the HAL_RTC_Init() function.

-

-    *** RTC Wake-up configuration ***

-    ================================

-    [..]

-    (+) To configure the RTC Wakeup Clock source and Counter use the HAL_RTCEx_SetWakeUpTimer()

-        function. You can also configure the RTC Wakeup timer with interrupt mode

-            using the HAL_RTCEx_SetWakeUpTimer_IT() function.

-    (+) To read the RTC WakeUp Counter register, use the HAL_RTCEx_GetWakeUpTimer()

-            function.

-        (@) Not available on F030x4/x6/x8 and F070x6

-

-    *** TimeStamp configuration ***

-    ===============================

-    [..]

-        (+) Configure the RTC_AF trigger and enable the RTC TimeStamp using the

-            HAL_RTCEx_SetTimeStamp() function. You can also configure the RTC TimeStamp with

-            interrupt mode using the HAL_RTCEx_SetTimeStamp_IT() function.

-        (+) To read the RTC TimeStamp Time and Date register, use the HAL_RTCEx_GetTimeStamp()

-            function.

-

-    *** Tamper configuration ***

-    ============================

-    [..]

-        (+) Enable the RTC Tamper and configure the Tamper filter count, trigger Edge

-            or Level according to the Tamper filter (if equal to 0 Edge else Level)

-            value, sampling frequency, precharge or discharge and Pull-UP using the

-            HAL_RTCEx_SetTamper() function. You can configure RTC Tamper in interrupt

-            mode using HAL_RTCEx_SetTamper_IT() function.

-

-    *** Backup Data Registers configuration ***

-    ===========================================

-    [..]

-        (+) To write to the RTC Backup Data registers, use the HAL_RTCEx_BKUPWrite()

-            function.

-        (+) To read the RTC Backup Data registers, use the HAL_RTCEx_BKUPRead()

-            function.

-        (@) Not available on F030x6/x8/xC and F070x6/xB (F0xx Value Line devices)

-

-

-   @endverbatim

-  ******************************************************************************

-  * @attention

-  *

-  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.

-  * All rights reserved.</center></h2>

-  *

-  * This software component is licensed by ST under BSD 3-Clause license,

-  * the "License"; You may not use this file except in compliance with the

-  * License. You may obtain a copy of the License at:

-  *                        opensource.org/licenses/BSD-3-Clause

-  *

-  ******************************************************************************

-  */

-

-/* Includes ------------------------------------------------------------------*/

-#include "stm32f0xx_hal.h"

-

-/** @addtogroup STM32F0xx_HAL_Driver

-  * @{

-  */

-

-

-

-/** @addtogroup RTCEx

-  * @brief RTC Extended HAL module driver

-  * @{

-  */

-

-#ifdef HAL_RTC_MODULE_ENABLED

-

-/* Private typedef -----------------------------------------------------------*/

-/* Private define ------------------------------------------------------------*/

-/* Private macro -------------------------------------------------------------*/

-/* Private variables ---------------------------------------------------------*/

-/* Private function prototypes -----------------------------------------------*/

-/* Exported functions ---------------------------------------------------------*/

-

-/** @addtogroup RTCEx_Exported_Functions

-  * @{

-  */

-

-

-/** @addtogroup RTCEx_Exported_Functions_Group1

- *  @brief   RTC TimeStamp and Tamper functions

- *

-@verbatim

- ===============================================================================

-                 ##### RTC TimeStamp and Tamper functions #####

- ===============================================================================

-

- [..] This section provides functions allowing to configure TimeStamp feature

-

-@endverbatim

-  * @{

-  */

-

-/**

-  * @brief  Set TimeStamp.

-  * @note   This API must be called before enabling the TimeStamp feature.

-  * @param  hrtc RTC handle

-  * @param  TimeStampEdge Specifies the pin edge on which the TimeStamp is

-  *         activated.

-  *          This parameter can be one of the following values:

-  *             @arg RTC_TIMESTAMPEDGE_RISING: the Time stamp event occurs on the

-  *                                        rising edge of the related pin.

-  *             @arg RTC_TIMESTAMPEDGE_FALLING: the Time stamp event occurs on the

-  *                                         falling edge of the related pin.

-  * @param  RTC_TimeStampPin specifies the RTC TimeStamp Pin.

-  *          This parameter can be one of the following values:

-  *             @arg RTC_TIMESTAMPPIN_DEFAULT: PC13 is selected as RTC TimeStamp Pin.

-  * @retval HAL status

-  */

-HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin)

-{

-  uint32_t tmpreg = 0U;

-

-  /* Check the parameters */

-  assert_param(IS_TIMESTAMP_EDGE(TimeStampEdge));

-  assert_param(IS_RTC_TIMESTAMP_PIN(RTC_TimeStampPin));

-

-  /* Process Locked */

-  __HAL_LOCK(hrtc);

-

-  hrtc->State = HAL_RTC_STATE_BUSY;

-

-  /* Get the RTC_CR register and clear the bits to be configured */

-  tmpreg = (uint32_t)(hrtc->Instance->CR & (uint32_t)~(RTC_CR_TSEDGE | RTC_CR_TSE));

-

-  tmpreg |= TimeStampEdge;

-

-  /* Disable the write protection for RTC registers */

-  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);

-

-  /* Configure the Time Stamp TSEDGE and Enable bits */

-  hrtc->Instance->CR = (uint32_t)tmpreg;

-

-  __HAL_RTC_TIMESTAMP_ENABLE(hrtc);

-

-  /* Enable the write protection for RTC registers */

-  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);

-

-  /* Change RTC state */

-  hrtc->State = HAL_RTC_STATE_READY;

-

-  /* Process Unlocked */

-  __HAL_UNLOCK(hrtc);

-

-  return HAL_OK;

-}

-

-/**

-  * @brief  Set TimeStamp with Interrupt.

-  * @param  hrtc RTC handle

-  * @note   This API must be called before enabling the TimeStamp feature.

-  * @param  TimeStampEdge Specifies the pin edge on which the TimeStamp is

-  *         activated.

-  *          This parameter can be one of the following values:

-  *             @arg RTC_TIMESTAMPEDGE_RISING: the Time stamp event occurs on the

-  *                                        rising edge of the related pin.

-  *             @arg RTC_TIMESTAMPEDGE_FALLING: the Time stamp event occurs on the

-  *                                         falling edge of the related pin.

-  * @param  RTC_TimeStampPin Specifies the RTC TimeStamp Pin.

-  *          This parameter can be one of the following values:

-  *             @arg RTC_TIMESTAMPPIN_DEFAULT: PC13 is selected as RTC TimeStamp Pin.

-  * @retval HAL status

-  */

-HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp_IT(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin)

-{

-  uint32_t tmpreg = 0U;

-

-  /* Check the parameters */

-  assert_param(IS_TIMESTAMP_EDGE(TimeStampEdge));

-  assert_param(IS_RTC_TIMESTAMP_PIN(RTC_TimeStampPin));

-

-  /* Process Locked */

-  __HAL_LOCK(hrtc);

-

-  hrtc->State = HAL_RTC_STATE_BUSY;

-

-  /* Get the RTC_CR register and clear the bits to be configured */

-  tmpreg = (uint32_t)(hrtc->Instance->CR & (uint32_t)~(RTC_CR_TSEDGE | RTC_CR_TSE));

-

-  tmpreg |= TimeStampEdge;

-

-  /* Disable the write protection for RTC registers */

-  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);

-

-  /* Configure the Time Stamp TSEDGE and Enable bits */

-  hrtc->Instance->CR = (uint32_t)tmpreg;

-

-  __HAL_RTC_TIMESTAMP_ENABLE(hrtc);

-

-  /* Enable IT timestamp */

-  __HAL_RTC_TIMESTAMP_ENABLE_IT(hrtc, RTC_IT_TS);

-

-  /* RTC timestamp Interrupt Configuration: EXTI configuration */

-  __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT();

-

-  __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE();

-

-  /* Enable the write protection for RTC registers */

-  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);

-

-  hrtc->State = HAL_RTC_STATE_READY;

-

-  /* Process Unlocked */

-  __HAL_UNLOCK(hrtc);

-

-  return HAL_OK;

-}

-

-/**

-  * @brief  Deactivate TimeStamp.

-  * @param  hrtc RTC handle

-  * @retval HAL status

-  */

-HAL_StatusTypeDef HAL_RTCEx_DeactivateTimeStamp(RTC_HandleTypeDef *hrtc)

-{

-  uint32_t tmpreg = 0U;

-

-  /* Process Locked */

-  __HAL_LOCK(hrtc);

-

-  hrtc->State = HAL_RTC_STATE_BUSY;

-

-  /* Disable the write protection for RTC registers */

-  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);

-

-  /* In case of interrupt mode is used, the interrupt source must disabled */

-  __HAL_RTC_TIMESTAMP_DISABLE_IT(hrtc, RTC_IT_TS);

-

-  /* Get the RTC_CR register and clear the bits to be configured */

-  tmpreg = (uint32_t)(hrtc->Instance->CR & (uint32_t)~(RTC_CR_TSEDGE | RTC_CR_TSE));

-

-  /* Configure the Time Stamp TSEDGE and Enable bits */

-  hrtc->Instance->CR = (uint32_t)tmpreg;

-

-  /* Enable the write protection for RTC registers */

-  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);

-

-  hrtc->State = HAL_RTC_STATE_READY;

-

-  /* Process Unlocked */

-  __HAL_UNLOCK(hrtc);

-

-  return HAL_OK;

-}

-

-/**

-  * @brief  Get the RTC TimeStamp value.

-  * @param  hrtc RTC handle

-

-  * @param  sTimeStamp Pointer to Time structure

-  * @param  sTimeStampDate Pointer to Date structure

-  * @param  Format specifies the format of the entered parameters.

-  *          This parameter can be one of the following values:

-  *             @arg RTC_FORMAT_BIN: Binary data format

-  *             @arg RTC_FORMAT_BCD: BCD data format

-  * @retval HAL status

-  */

-HAL_StatusTypeDef HAL_RTCEx_GetTimeStamp(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTimeStamp, RTC_DateTypeDef *sTimeStampDate, uint32_t Format)

-{

-  uint32_t tmptime = 0U, tmpdate = 0U;

-

-  /* Check the parameters */

-  assert_param(IS_RTC_FORMAT(Format));

-

-  /* Get the TimeStamp time and date registers values */

-  tmptime = (uint32_t)(hrtc->Instance->TSTR & RTC_TR_RESERVED_MASK);

-  tmpdate = (uint32_t)(hrtc->Instance->TSDR & RTC_DR_RESERVED_MASK);

-

-  /* Fill the Time structure fields with the read parameters */

-  sTimeStamp->Hours = (uint8_t)((tmptime & (RTC_TR_HT | RTC_TR_HU)) >> 16U);

-  sTimeStamp->Minutes = (uint8_t)((tmptime & (RTC_TR_MNT | RTC_TR_MNU)) >> 8U);

-  sTimeStamp->Seconds = (uint8_t)(tmptime & (RTC_TR_ST | RTC_TR_SU));

-  sTimeStamp->TimeFormat = (uint8_t)((tmptime & (RTC_TR_PM)) >> 16U);

-  sTimeStamp->SubSeconds = (uint32_t) hrtc->Instance->TSSSR;

-

-  /* Fill the Date structure fields with the read parameters */

-  sTimeStampDate->Year = 0;

-  sTimeStampDate->Month = (uint8_t)((tmpdate & (RTC_DR_MT | RTC_DR_MU)) >> 8U);

-  sTimeStampDate->Date = (uint8_t)(tmpdate & (RTC_DR_DT | RTC_DR_DU));

-  sTimeStampDate->WeekDay = (uint8_t)((tmpdate & (RTC_DR_WDU)) >> 13U);

-

-  /* Check the input parameters format */

-  if (Format == RTC_FORMAT_BIN)

-  {

-    /* Convert the TimeStamp structure parameters to Binary format */

-    sTimeStamp->Hours = (uint8_t)RTC_Bcd2ToByte(sTimeStamp->Hours);

-    sTimeStamp->Minutes = (uint8_t)RTC_Bcd2ToByte(sTimeStamp->Minutes);

-    sTimeStamp->Seconds = (uint8_t)RTC_Bcd2ToByte(sTimeStamp->Seconds);

-

-    /* Convert the DateTimeStamp structure parameters to Binary format */

-    sTimeStampDate->Month = (uint8_t)RTC_Bcd2ToByte(sTimeStampDate->Month);

-    sTimeStampDate->Date = (uint8_t)RTC_Bcd2ToByte(sTimeStampDate->Date);

-    sTimeStampDate->WeekDay = (uint8_t)RTC_Bcd2ToByte(sTimeStampDate->WeekDay);

-  }

-

-  /* Clear the TIMESTAMP Flag */

-  __HAL_RTC_TIMESTAMP_CLEAR_FLAG(hrtc, RTC_FLAG_TSF);

-

-  return HAL_OK;

-}

-

-/**

-  * @brief  Set Tamper

-  * @note   By calling this API we disable the tamper interrupt for all tampers.

-  * @param  hrtc RTC handle

-  * @param  sTamper Pointer to Tamper Structure.

-  * @retval HAL status

-  */

-HAL_StatusTypeDef HAL_RTCEx_SetTamper(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef *sTamper)

-{

-  uint32_t tmpreg = 0U;

-

-  /* Check the parameters */

-  assert_param(IS_RTC_TAMPER(sTamper->Tamper));

-  assert_param(IS_RTC_TAMPER_TRIGGER(sTamper->Trigger));

-  assert_param(IS_RTC_TAMPER_FILTER(sTamper->Filter));

-  assert_param(IS_RTC_TAMPER_SAMPLING_FREQ(sTamper->SamplingFrequency));

-  assert_param(IS_RTC_TAMPER_PRECHARGE_DURATION(sTamper->PrechargeDuration));

-  assert_param(IS_RTC_TAMPER_PULLUP_STATE(sTamper->TamperPullUp));

-  assert_param(IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(sTamper->TimeStampOnTamperDetection));

-

-  /* Process Locked */

-  __HAL_LOCK(hrtc);

-

-  hrtc->State = HAL_RTC_STATE_BUSY;

-

-  if (sTamper->Trigger != RTC_TAMPERTRIGGER_RISINGEDGE)

-  {

-    sTamper->Trigger = (uint32_t)(sTamper->Tamper << 1U);

-  }

-

-  tmpreg = ((uint32_t)sTamper->Tamper | (uint32_t)sTamper->Trigger | (uint32_t)sTamper->Filter | \

-            (uint32_t)sTamper->SamplingFrequency | (uint32_t)sTamper->PrechargeDuration | \

-            (uint32_t)sTamper->TamperPullUp | sTamper->TimeStampOnTamperDetection);

-

-  hrtc->Instance->TAFCR &= (uint32_t)~((uint32_t)sTamper->Tamper | (uint32_t)(sTamper->Tamper << 1U) | (uint32_t)RTC_TAFCR_TAMPTS | \

-                                       (uint32_t)RTC_TAFCR_TAMPFREQ | (uint32_t)RTC_TAFCR_TAMPFLT | (uint32_t)RTC_TAFCR_TAMPPRCH | \

-                                       (uint32_t)RTC_TAFCR_TAMPPUDIS | (uint32_t)RTC_TAFCR_TAMPIE);

-

-  hrtc->Instance->TAFCR |= tmpreg;

-

-  hrtc->State = HAL_RTC_STATE_READY;

-

-  /* Process Unlocked */

-  __HAL_UNLOCK(hrtc);

-

-  return HAL_OK;

-}

-

-/**

-  * @brief  Sets Tamper with interrupt.

-  * @note   By calling this API we force the tamper interrupt for all tampers.

-  * @param  hrtc pointer to a RTC_HandleTypeDef structure that contains

-  *                the configuration information for RTC.

-  * @param  sTamper Pointer to RTC Tamper.

-  * @retval HAL status

-  */

-HAL_StatusTypeDef HAL_RTCEx_SetTamper_IT(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef *sTamper)

-{

-  uint32_t tmpreg = 0U;

-

-  /* Check the parameters */

-  assert_param(IS_RTC_TAMPER(sTamper->Tamper));

-  assert_param(IS_RTC_TAMPER_TRIGGER(sTamper->Trigger));

-  assert_param(IS_RTC_TAMPER_FILTER(sTamper->Filter));

-  assert_param(IS_RTC_TAMPER_SAMPLING_FREQ(sTamper->SamplingFrequency));

-  assert_param(IS_RTC_TAMPER_PRECHARGE_DURATION(sTamper->PrechargeDuration));

-  assert_param(IS_RTC_TAMPER_PULLUP_STATE(sTamper->TamperPullUp));

-  assert_param(IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(sTamper->TimeStampOnTamperDetection));

-

-  /* Process Locked */

-  __HAL_LOCK(hrtc);

-

-  hrtc->State = HAL_RTC_STATE_BUSY;

-

-  /* Configure the tamper trigger */

-  if (sTamper->Trigger != RTC_TAMPERTRIGGER_RISINGEDGE)

-  {

-    sTamper->Trigger = (uint32_t)(sTamper->Tamper << 1U);

-  }

-

-  tmpreg = ((uint32_t)sTamper->Tamper | (uint32_t)sTamper->Trigger | (uint32_t)sTamper->Filter | \

-            (uint32_t)sTamper->SamplingFrequency | (uint32_t)sTamper->PrechargeDuration | \

-            (uint32_t)sTamper->TamperPullUp | sTamper->TimeStampOnTamperDetection);

-

-  hrtc->Instance->TAFCR &= (uint32_t)~((uint32_t)sTamper->Tamper | (uint32_t)(sTamper->Tamper << 1U) | (uint32_t)RTC_TAFCR_TAMPTS | \

-                                       (uint32_t)RTC_TAFCR_TAMPFREQ | (uint32_t)RTC_TAFCR_TAMPFLT | (uint32_t)RTC_TAFCR_TAMPPRCH | \

-                                       (uint32_t)RTC_TAFCR_TAMPPUDIS);

-

-  hrtc->Instance->TAFCR |= tmpreg;

-

-  /* Configure the Tamper Interrupt in the RTC_TAFCR */

-  hrtc->Instance->TAFCR |= (uint32_t)RTC_TAFCR_TAMPIE;

-

-  /* RTC Tamper Interrupt Configuration: EXTI configuration */

-  __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT();

-

-  __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE();

-

-  hrtc->State = HAL_RTC_STATE_READY;

-

-  /* Process Unlocked */

-  __HAL_UNLOCK(hrtc);

-

-  return HAL_OK;

-}

-

-/**

-  * @brief  Deactivate Tamper.

-  * @param  hrtc RTC handle

-  * @param  Tamper Selected tamper pin.

-  *          This parameter can be any combination of RTC_TAMPER_1, RTC_TAMPER_2 and RTC_TAMPER_3.

-  * @retval HAL status

-  */

-HAL_StatusTypeDef HAL_RTCEx_DeactivateTamper(RTC_HandleTypeDef *hrtc, uint32_t Tamper)

-{

-  assert_param(IS_RTC_TAMPER(Tamper));

-

-  /* Process Locked */

-  __HAL_LOCK(hrtc);

-

-  hrtc->State = HAL_RTC_STATE_BUSY;

-

-  /* Disable the selected Tamper pin */

-  hrtc->Instance->TAFCR &= (uint32_t)~Tamper;

-

-  hrtc->State = HAL_RTC_STATE_READY;

-

-  /* Process Unlocked */

-  __HAL_UNLOCK(hrtc);

-

-  return HAL_OK;

-}

-

-/**

-  * @brief  Handle TimeStamp interrupt request.

-  * @param  hrtc RTC handle

-  * @retval None

-  */

-void HAL_RTCEx_TamperTimeStampIRQHandler(RTC_HandleTypeDef *hrtc)

-{

-  /* Get the TimeStamp interrupt source enable status */

-  if (__HAL_RTC_TIMESTAMP_GET_IT_SOURCE(hrtc, RTC_IT_TS) != RESET)

-  {

-    /* Get the pending status of the TIMESTAMP Interrupt */

-    if (__HAL_RTC_TIMESTAMP_GET_FLAG(hrtc, RTC_FLAG_TSF) != RESET)

-    {

-      /* TIMESTAMP callback */

-#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)

-      hrtc->TimeStampEventCallback(hrtc);

-#else

-      HAL_RTCEx_TimeStampEventCallback(hrtc);

-#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */

-

-      /* Clear the TIMESTAMP interrupt pending bit */

-      __HAL_RTC_TIMESTAMP_CLEAR_FLAG(hrtc, RTC_FLAG_TSF);

-    }

-  }

-

-  /* Get the Tamper interrupts source enable status */

-  if (__HAL_RTC_TAMPER_GET_IT_SOURCE(hrtc, RTC_IT_TAMP))

-  {

-    /* Get the pending status of the Tamper1 Interrupt */

-    if (__HAL_RTC_TAMPER_GET_FLAG(hrtc, RTC_FLAG_TAMP1F) != RESET)

-    {

-      /* Tamper1 callback */

-#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)

-      hrtc->Tamper1EventCallback(hrtc);

-#else

-      HAL_RTCEx_Tamper1EventCallback(hrtc);

-#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */

-

-      /* Clear the Tamper1 interrupt pending bit */

-      __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc, RTC_FLAG_TAMP1F);

-    }

-  }

-

-  /* Get the Tamper interrupts source enable status */

-  if (__HAL_RTC_TAMPER_GET_IT_SOURCE(hrtc, RTC_IT_TAMP))

-  {

-    /* Get the pending status of the Tamper2 Interrupt */

-    if (__HAL_RTC_TAMPER_GET_FLAG(hrtc, RTC_FLAG_TAMP2F) != RESET)

-    {

-      /* Tamper2 callback */

-#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)

-      hrtc->Tamper2EventCallback(hrtc);

-#else

-      HAL_RTCEx_Tamper2EventCallback(hrtc);

-#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */

-

-      /* Clear the Tamper2 interrupt pending bit */

-      __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc, RTC_FLAG_TAMP2F);

-    }

-  }

-

-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)

-  /* Get the Tamper interrupts source enable status */

-  if (__HAL_RTC_TAMPER_GET_IT_SOURCE(hrtc, RTC_IT_TAMP))

-  {

-    /* Get the pending status of the Tamper3 Interrupt */

-    if (__HAL_RTC_TAMPER_GET_FLAG(hrtc, RTC_FLAG_TAMP3F) != RESET)

-    {

-      /* Tamper3 callback */

-#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)

-      hrtc->Tamper3EventCallback(hrtc);

-#else

-      HAL_RTCEx_Tamper3EventCallback(hrtc);

-#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */

-

-      /* Clear the Tamper3 interrupt pending bit */

-      __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc, RTC_FLAG_TAMP3F);

-    }

-  }

-#endif

-

-  /* Clear the EXTI's Flag for RTC TimeStamp and Tamper */

-  __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG();

-

-  /* Change RTC state */

-  hrtc->State = HAL_RTC_STATE_READY;

-}

-

-/**

-  * @brief  TimeStamp callback.

-  * @param  hrtc RTC handle

-  * @retval None

-  */

-__weak void HAL_RTCEx_TimeStampEventCallback(RTC_HandleTypeDef *hrtc)

-{

-  /* Prevent unused argument(s) compilation warning */

-  UNUSED(hrtc);

-

-  /* NOTE : This function should not be modified, when the callback is needed,

-            the HAL_RTCEx_TimeStampEventCallback could be implemented in the user file

-  */

-}

-

-/**

-  * @brief  Tamper 1 callback.

-  * @param  hrtc RTC handle

-  * @retval None

-  */

-__weak void HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc)

-{

-  /* Prevent unused argument(s) compilation warning */

-  UNUSED(hrtc);

-

-  /* NOTE : This function should not be modified, when the callback is needed,

-            the HAL_RTCEx_Tamper1EventCallback could be implemented in the user file

-   */

-}

-

-/**

-  * @brief  Tamper 2 callback.

-  * @param  hrtc RTC handle

-  * @retval None

-  */

-__weak void HAL_RTCEx_Tamper2EventCallback(RTC_HandleTypeDef *hrtc)

-{

-  /* Prevent unused argument(s) compilation warning */

-  UNUSED(hrtc);

-

-  /* NOTE : This function should not be modified, when the callback is needed,

-            the HAL_RTCEx_Tamper2EventCallback could be implemented in the user file

-   */

-}

-

-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)

-/**

-  * @brief  Tamper 3 callback.

-  * @param  hrtc RTC handle

-  * @retval None

-  */

-__weak void HAL_RTCEx_Tamper3EventCallback(RTC_HandleTypeDef *hrtc)

-{

-  /* Prevent unused argument(s) compilation warning */

-  UNUSED(hrtc);

-

-  /* NOTE : This function should not be modified, when the callback is needed,

-            the HAL_RTCEx_Tamper3EventCallback could be implemented in the user file

-   */

-}

-#endif

-

-/**

-  * @brief  Handle TimeStamp polling request.

-  * @param  hrtc RTC handle

-  * @param  Timeout Timeout duration

-  * @retval HAL status

-  */

-HAL_StatusTypeDef HAL_RTCEx_PollForTimeStampEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout)

-{

-  uint32_t tickstart = HAL_GetTick();

-

-  while (__HAL_RTC_TIMESTAMP_GET_FLAG(hrtc, RTC_FLAG_TSF) == RESET)

-  {

-    if (__HAL_RTC_TIMESTAMP_GET_FLAG(hrtc, RTC_FLAG_TSOVF) != RESET)

-    {

-      /* Clear the TIMESTAMP OverRun Flag */

-      __HAL_RTC_TIMESTAMP_CLEAR_FLAG(hrtc, RTC_FLAG_TSOVF);

-

-      /* Change TIMESTAMP state */

-      hrtc->State = HAL_RTC_STATE_ERROR;

-

-      return HAL_ERROR;

-    }

-

-    if (Timeout != HAL_MAX_DELAY)

-    {

-      if ((Timeout == 0U) || ((HAL_GetTick() - tickstart) > Timeout))

-      {

-        hrtc->State = HAL_RTC_STATE_TIMEOUT;

-        return HAL_TIMEOUT;

-      }

-    }

-  }

-

-  /* Change RTC state */

-  hrtc->State = HAL_RTC_STATE_READY;

-

-  return HAL_OK;

-}

-

-/**

-  * @brief  Handle Tamper 1 Polling.

-  * @param  hrtc RTC handle

-  * @param  Timeout Timeout duration

-  * @retval HAL status

-  */

-HAL_StatusTypeDef HAL_RTCEx_PollForTamper1Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout)

-{

-  uint32_t tickstart = HAL_GetTick();

-

-  /* Get the status of the Interrupt */

-  while (__HAL_RTC_TAMPER_GET_FLAG(hrtc, RTC_FLAG_TAMP1F) == RESET)

-  {

-    if (Timeout != HAL_MAX_DELAY)

-    {

-      if ((Timeout == 0U) || ((HAL_GetTick() - tickstart) > Timeout))

-      {

-        hrtc->State = HAL_RTC_STATE_TIMEOUT;

-        return HAL_TIMEOUT;

-      }

-    }

-  }

-

-  /* Clear the Tamper Flag */

-  __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc, RTC_FLAG_TAMP1F);

-

-  /* Change RTC state */

-  hrtc->State = HAL_RTC_STATE_READY;

-

-  return HAL_OK;

-}

-

-/**

-  * @brief  Handle Tamper 2 Polling.

-  * @param  hrtc RTC handle

-  * @param  Timeout Timeout duration

-  * @retval HAL status

-  */

-HAL_StatusTypeDef HAL_RTCEx_PollForTamper2Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout)

-{

-  uint32_t tickstart = HAL_GetTick();

-

-  /* Get the status of the Interrupt */

-  while (__HAL_RTC_TAMPER_GET_FLAG(hrtc, RTC_FLAG_TAMP2F) == RESET)

-  {

-    if (Timeout != HAL_MAX_DELAY)

-    {

-      if ((Timeout == 0U) || ((HAL_GetTick() - tickstart) > Timeout))

-      {

-        hrtc->State = HAL_RTC_STATE_TIMEOUT;

-        return HAL_TIMEOUT;

-      }

-    }

-  }

-

-  /* Clear the Tamper Flag */

-  __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc, RTC_FLAG_TAMP2F);

-

-  /* Change RTC state */

-  hrtc->State = HAL_RTC_STATE_READY;

-

-  return HAL_OK;

-}

-

-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)

-/**

-  * @brief  Handle Tamper 3 Polling.

-  * @param  hrtc RTC handle

-  * @param  Timeout Timeout duration

-  * @retval HAL status

-  */

-HAL_StatusTypeDef HAL_RTCEx_PollForTamper3Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout)

-{

-  uint32_t tickstart = HAL_GetTick();

-

-  /* Get the status of the Interrupt */

-  while (__HAL_RTC_TAMPER_GET_FLAG(hrtc, RTC_FLAG_TAMP3F) == RESET)

-  {

-    if (Timeout != HAL_MAX_DELAY)

-    {

-      if ((Timeout == 0U) || ((HAL_GetTick() - tickstart) > Timeout))

-      {

-        hrtc->State = HAL_RTC_STATE_TIMEOUT;

-        return HAL_TIMEOUT;

-      }

-    }

-  }

-

-  /* Clear the Tamper Flag */

-  __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc, RTC_FLAG_TAMP3F);

-

-  /* Change RTC state */

-  hrtc->State = HAL_RTC_STATE_READY;

-

-  return HAL_OK;

-}

-#endif

-

-/**

-  * @}

-  */

-

-#if defined(STM32F070xB) || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)

-/** @addtogroup RTCEx_Exported_Functions_Group2

-  * @brief    RTC Wake-up functions

-  *

-@verbatim

- ===============================================================================

-                        ##### RTC Wake-up functions #####

- ===============================================================================

-

- [..] This section provides functions allowing to configure Wake-up feature

-

-@endverbatim

-  * @{

-  */

-

-/**

-  * @brief  Set wake up timer.

-  * @param  hrtc RTC handle

-  * @param  WakeUpCounter Wake up counter

-  * @param  WakeUpClock Wake up clock

-  * @retval HAL status

-  */

-HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock)

-{

-  uint32_t tickstart = 0U;

-

-  /* Check the parameters */

-  assert_param(IS_RTC_WAKEUP_CLOCK(WakeUpClock));

-  assert_param(IS_RTC_WAKEUP_COUNTER(WakeUpCounter));

-

-  /* Process Locked */

-  __HAL_LOCK(hrtc);

-

-  hrtc->State = HAL_RTC_STATE_BUSY;

-

-  /* Disable the write protection for RTC registers */

-  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);

-

-  /*Check RTC WUTWF flag is reset only when wake up timer enabled*/

-  if ((hrtc->Instance->CR & RTC_CR_WUTE) != RESET)

-  {

-    tickstart = HAL_GetTick();

-

-    /* Wait till RTC WUTWF flag is reset and if Time out is reached exit */

-    while (__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTWF) == SET)

-    {

-      if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE)

-      {

-        /* Enable the write protection for RTC registers */

-        __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);

-

-        hrtc->State = HAL_RTC_STATE_TIMEOUT;

-

-        /* Process Unlocked */

-        __HAL_UNLOCK(hrtc);

-

-        return HAL_TIMEOUT;

-      }

-    }

-  }

-

-  __HAL_RTC_WAKEUPTIMER_DISABLE(hrtc);

-

-  tickstart = HAL_GetTick();

-

-  /* Wait till RTC WUTWF flag is set and if Time out is reached exit */

-  while (__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTWF) == RESET)

-  {

-    if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE)

-    {

-      /* Enable the write protection for RTC registers */

-      __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);

-

-      hrtc->State = HAL_RTC_STATE_TIMEOUT;

-

-      /* Process Unlocked */

-      __HAL_UNLOCK(hrtc);

-

-      return HAL_TIMEOUT;

-    }

-  }

-

-  /* Clear the Wakeup Timer clock source bits in CR register */

-  hrtc->Instance->CR &= (uint32_t)~RTC_CR_WUCKSEL;

-

-  /* Configure the clock source */

-  hrtc->Instance->CR |= (uint32_t)WakeUpClock;

-

-  /* Configure the Wakeup Timer counter */

-  hrtc->Instance->WUTR = (uint32_t)WakeUpCounter;

-

-  /* Enable the Wakeup Timer */

-  __HAL_RTC_WAKEUPTIMER_ENABLE(hrtc);

-

-  /* Enable the write protection for RTC registers */

-  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);

-

-  hrtc->State = HAL_RTC_STATE_READY;

-

-  /* Process Unlocked */

-  __HAL_UNLOCK(hrtc);

-

-  return HAL_OK;

-}

-

-/**

-  * @brief  Set wake up timer with interrupt.

-  * @param  hrtc RTC handle

-  * @param  WakeUpCounter Wake up counter

-  * @param  WakeUpClock Wake up clock

-  * @retval HAL status

-  */

-HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer_IT(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock)

-{

-  uint32_t tickstart = 0U;

-

-  /* Check the parameters */

-  assert_param(IS_RTC_WAKEUP_CLOCK(WakeUpClock));

-  assert_param(IS_RTC_WAKEUP_COUNTER(WakeUpCounter));

-

-  /* Process Locked */

-  __HAL_LOCK(hrtc);

-

-  hrtc->State = HAL_RTC_STATE_BUSY;

-

-  /* Disable the write protection for RTC registers */

-  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);

-

-  /*Check RTC WUTWF flag is reset only when wake up timer enabled*/

-  if ((hrtc->Instance->CR & RTC_CR_WUTE) != RESET)

-  {

-    tickstart = HAL_GetTick();

-

-    /* Wait till RTC WUTWF flag is reset and if Time out is reached exit */

-    while (__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTWF) == SET)

-    {

-      if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE)

-      {

-        /* Enable the write protection for RTC registers */

-        __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);

-

-        hrtc->State = HAL_RTC_STATE_TIMEOUT;

-

-        /* Process Unlocked */

-        __HAL_UNLOCK(hrtc);

-

-        return HAL_TIMEOUT;

-      }

-    }

-  }

-

-  /* Disable the Wake-Up timer */

-  __HAL_RTC_WAKEUPTIMER_DISABLE(hrtc);

-

-  /* Clear flag Wake-Up */

-  __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(hrtc, RTC_FLAG_WUTF);

-

-  tickstart = HAL_GetTick();

-

-  /* Wait till RTC WUTWF flag is set and if Time out is reached exit */

-  while (__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTWF) == RESET)

-  {

-    if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE)

-    {

-      /* Enable the write protection for RTC registers */

-      __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);

-

-      hrtc->State = HAL_RTC_STATE_TIMEOUT;

-

-      /* Process Unlocked */

-      __HAL_UNLOCK(hrtc);

-

-      return HAL_TIMEOUT;

-    }

-  }

-

-  /* Configure the Wakeup Timer counter */

-  hrtc->Instance->WUTR = (uint32_t)WakeUpCounter;

-

-  /* Clear the Wakeup Timer clock source bits in CR register */

-  hrtc->Instance->CR &= (uint32_t)~RTC_CR_WUCKSEL;

-

-  /* Configure the clock source */

-  hrtc->Instance->CR |= (uint32_t)WakeUpClock;

-

-  /* RTC WakeUpTimer Interrupt Configuration: EXTI configuration */

-  __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT();

-

-  __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE();

-

-  /* Configure the Interrupt in the RTC_CR register */

-  __HAL_RTC_WAKEUPTIMER_ENABLE_IT(hrtc, RTC_IT_WUT);

-

-  /* Enable the Wakeup Timer */

-  __HAL_RTC_WAKEUPTIMER_ENABLE(hrtc);

-

-  /* Enable the write protection for RTC registers */

-  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);

-

-  hrtc->State = HAL_RTC_STATE_READY;

-

-  /* Process Unlocked */

-  __HAL_UNLOCK(hrtc);

-

-  return HAL_OK;

-}

-

-/**

-  * @brief  Deactivate wake up timer counter.

-  * @param  hrtc RTC handle

-  * @retval HAL status

-  */

-uint32_t HAL_RTCEx_DeactivateWakeUpTimer(RTC_HandleTypeDef *hrtc)

-{

-  uint32_t tickstart = 0U;

-

-  /* Process Locked */

-  __HAL_LOCK(hrtc);

-

-  hrtc->State = HAL_RTC_STATE_BUSY;

-

-  /* Disable the write protection for RTC registers */

-  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);

-

-  /* Disable the Wakeup Timer */

-  __HAL_RTC_WAKEUPTIMER_DISABLE(hrtc);

-

-  /* In case of interrupt mode is used, the interrupt source must disabled */

-  __HAL_RTC_WAKEUPTIMER_DISABLE_IT(hrtc, RTC_IT_WUT);

-

-  tickstart = HAL_GetTick();

-  /* Wait till RTC WUTWF flag is set and if Time out is reached exit */

-  while (__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTWF) == RESET)

-  {

-    if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE)

-    {

-      /* Enable the write protection for RTC registers */

-      __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);

-

-      hrtc->State = HAL_RTC_STATE_TIMEOUT;

-

-      /* Process Unlocked */

-      __HAL_UNLOCK(hrtc);

-

-      return HAL_TIMEOUT;

-    }

-  }

-

-  /* Enable the write protection for RTC registers */

-  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);

-

-  hrtc->State = HAL_RTC_STATE_READY;

-

-  /* Process Unlocked */

-  __HAL_UNLOCK(hrtc);

-

-  return HAL_OK;

-}

-

-/**

-  * @brief  Get wake up timer counter.

-  * @param  hrtc RTC handle

-  * @retval Counter value

-  */

-uint32_t HAL_RTCEx_GetWakeUpTimer(RTC_HandleTypeDef *hrtc)

-{

-  /* Get the counter value */

-  return ((uint32_t)(hrtc->Instance->WUTR & RTC_WUTR_WUT));

-}

-

-/**

-  * @brief  Handle Wake Up Timer interrupt request.

-  * @param  hrtc RTC handle

-  * @retval None

-  */

-void HAL_RTCEx_WakeUpTimerIRQHandler(RTC_HandleTypeDef *hrtc)

-{

-  /* Get the WAKEUPTIMER interrupt source enable status */

-  if (__HAL_RTC_WAKEUPTIMER_GET_IT_SOURCE(hrtc, RTC_IT_WUT) != RESET)

-  {

-    /* Get the pending status of the WAKEUPTIMER Interrupt */

-    if (__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTF) != RESET)

-    {

-      /* WAKEUPTIMER callback */

-#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)

-      hrtc->WakeUpTimerEventCallback(hrtc);

-#else

-      HAL_RTCEx_WakeUpTimerEventCallback(hrtc);

-#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */

-

-      /* Clear the WAKEUPTIMER interrupt pending bit */

-      __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(hrtc, RTC_FLAG_WUTF);

-    }

-  }

-

-  /* Clear the EXTI's line Flag for RTC WakeUpTimer */

-  __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG();

-

-  /* Change RTC state */

-  hrtc->State = HAL_RTC_STATE_READY;

-}

-

-/**

-  * @brief  Wake Up Timer callback.

-  * @param  hrtc RTC handle

-  * @retval None

-  */

-__weak void HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc)

-{

-  /* Prevent unused argument(s) compilation warning */

-  UNUSED(hrtc);

-

-  /* NOTE : This function should not be modified, when the callback is needed,

-            the HAL_RTCEx_WakeUpTimerEventCallback could be implemented in the user file

-   */

-}

-

-

-/**

-  * @brief  Handle Wake Up Timer Polling.

-  * @param  hrtc RTC handle

-  * @param  Timeout Timeout duration

-  * @retval HAL status

-  */

-HAL_StatusTypeDef HAL_RTCEx_PollForWakeUpTimerEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout)

-{

-  uint32_t tickstart = HAL_GetTick();

-

-  while (__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTF) == RESET)

-  {

-    if (Timeout != HAL_MAX_DELAY)

-    {

-      if ((Timeout == 0U) || ((HAL_GetTick() - tickstart) > Timeout))

-      {

-        hrtc->State = HAL_RTC_STATE_TIMEOUT;

-

-        return HAL_TIMEOUT;

-      }

-    }

-  }

-

-  /* Clear the WAKEUPTIMER Flag */

-  __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(hrtc, RTC_FLAG_WUTF);

-

-  /* Change RTC state */

-  hrtc->State = HAL_RTC_STATE_READY;

-

-  return HAL_OK;

-}

-

-/**

-  * @}

-  */

-#endif /* defined(STM32F070xB) || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) | defined(STM32F030xC)  */

-

-/** @addtogroup RTCEx_Exported_Functions_Group3

-  * @brief    Extended Peripheral Control functions

-  *

-@verbatim

- ===============================================================================

-              ##### Extended Peripheral Control functions #####

- ===============================================================================

-    [..]

-    This subsection provides functions allowing to

-      (+) Write a data in a specified RTC Backup data register

-      (+) Read a data in a specified RTC Backup data register

-      (+) Set the Coarse calibration parameters.

-      (+) Deactivate the Coarse calibration parameters

-      (+) Set the Smooth calibration parameters.

-      (+) Configure the Synchronization Shift Control Settings.

-      (+) Configure the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz).

-      (+) Deactivate the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz).

-      (+) Enable the RTC reference clock detection.

-      (+) Disable the RTC reference clock detection.

-      (+) Enable the Bypass Shadow feature.

-      (+) Disable the Bypass Shadow feature.

-

-@endverbatim

-  * @{

-  */

-

-#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)

-/**

-  * @brief  Write a data in a specified RTC Backup data register.

-  * @param  hrtc RTC handle

-  * @param  BackupRegister RTC Backup data Register number.

-  *          This parameter can be: RTC_BKP_DRx where x can be from 0 to 4 to

-  *                                 specify the register.

-  * @param  Data Data to be written in the specified RTC Backup data register.

-  * @retval None

-  */

-void HAL_RTCEx_BKUPWrite(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister, uint32_t Data)

-{

-  uint32_t tmp = 0U;

-

-  /* Check the parameters */

-  assert_param(IS_RTC_BKP(BackupRegister));

-

-  tmp = (uint32_t) & (hrtc->Instance->BKP0R);

-  tmp += (BackupRegister * 4U);

-

-  /* Write the specified register */

-  *(__IO uint32_t *)tmp = (uint32_t)Data;

-}

-

-/**

-  * @brief  Reads data from the specified RTC Backup data Register.

-  * @param  hrtc RTC handle

-  * @param  BackupRegister RTC Backup data Register number.

-  *          This parameter can be: RTC_BKP_DRx where x can be from 0 to 4 to

-  *                                 specify the register.

-  * @retval Read value

-  */

-uint32_t HAL_RTCEx_BKUPRead(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister)

-{

-  uint32_t tmp = 0U;

-

-  /* Check the parameters */

-  assert_param(IS_RTC_BKP(BackupRegister));

-

-  tmp = (uint32_t) & (hrtc->Instance->BKP0R);

-  tmp += (BackupRegister * 4U);

-

-  /* Read the specified register */

-  return (*(__IO uint32_t *)tmp);

-}

-#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */

-

-/**

-  * @brief  Set the Smooth calibration parameters.

-  * @param  hrtc RTC handle

-  * @param  SmoothCalibPeriod Select the Smooth Calibration Period.

-  *          This parameter can be can be one of the following values :

-  *             @arg RTC_SMOOTHCALIB_PERIOD_32SEC: The smooth calibration period is 32s.

-  *             @arg RTC_SMOOTHCALIB_PERIOD_16SEC: The smooth calibration period is 16s.

-  *             @arg RTC_SMOOTHCALIB_PERIOD_8SEC: The smooth calibration period is 8s.

-  * @param  SmoothCalibPlusPulses Select to Set or reset the CALP bit.

-  *          This parameter can be one of the following values:

-  *             @arg RTC_SMOOTHCALIB_PLUSPULSES_SET: Add one RTCCLK pulse every 2*11 pulses.

-  *             @arg RTC_SMOOTHCALIB_PLUSPULSES_RESET: No RTCCLK pulses are added.

-  * @param  SmoothCalibMinusPulsesValue Select the value of CALM[8:0] bits.

-  *          This parameter can be one any value from 0 to 0x000001FF.

-  * @note   To deactivate the smooth calibration, the field SmoothCalibPlusPulses

-  *         must be equal to SMOOTHCALIB_PLUSPULSES_RESET and the field

-  *         SmoothCalibMinusPulsesValue mut be equal to 0.

-  * @retval HAL status

-  */

-HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef *hrtc, uint32_t SmoothCalibPeriod, uint32_t SmoothCalibPlusPulses, uint32_t SmoothCalibMinusPulsesValue)

-{

-  uint32_t tickstart = 0U;

-

-  /* Check the parameters */

-  assert_param(IS_RTC_SMOOTH_CALIB_PERIOD(SmoothCalibPeriod));

-  assert_param(IS_RTC_SMOOTH_CALIB_PLUS(SmoothCalibPlusPulses));

-  assert_param(IS_RTC_SMOOTH_CALIB_MINUS(SmoothCalibMinusPulsesValue));

-

-  /* Process Locked */

-  __HAL_LOCK(hrtc);

-

-  hrtc->State = HAL_RTC_STATE_BUSY;

-

-  /* Disable the write protection for RTC registers */

-  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);

-

-  /* check if a calibration is pending*/

-  if ((hrtc->Instance->ISR & RTC_ISR_RECALPF) != RESET)

-  {

-    tickstart = HAL_GetTick();

-

-    /* check if a calibration is pending*/

-    while ((hrtc->Instance->ISR & RTC_ISR_RECALPF) != RESET)

-    {

-      if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE)

-      {

-        /* Enable the write protection for RTC registers */

-        __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);

-

-        /* Change RTC state */

-        hrtc->State = HAL_RTC_STATE_TIMEOUT;

-

-        /* Process Unlocked */

-        __HAL_UNLOCK(hrtc);

-

-        return HAL_TIMEOUT;

-      }

-    }

-  }

-

-  /* Configure the Smooth calibration settings */

-  hrtc->Instance->CALR = (uint32_t)((uint32_t)SmoothCalibPeriod | (uint32_t)SmoothCalibPlusPulses | (uint32_t)SmoothCalibMinusPulsesValue);

-

-  /* Enable the write protection for RTC registers */

-  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);

-

-  /* Change RTC state */

-  hrtc->State = HAL_RTC_STATE_READY;

-

-  /* Process Unlocked */

-  __HAL_UNLOCK(hrtc);

-

-  return HAL_OK;

-}

-

-/**

-  * @brief  Configure the Synchronization Shift Control Settings.

-  * @note   When REFCKON is set, firmware must not write to Shift control register.

-  * @param  hrtc RTC handle

-  * @param  ShiftAdd1S Select to add or not 1 second to the time calendar.

-  *          This parameter can be one of the following values :

-  *             @arg RTC_SHIFTADD1S_SET: Add one second to the clock calendar.

-  *             @arg RTC_SHIFTADD1S_RESET: No effect.

-  * @param  ShiftSubFS Select the number of Second Fractions to substitute.

-  *          This parameter can be one any value from 0 to 0x7FFF.

-  * @retval HAL status

-  */

-HAL_StatusTypeDef HAL_RTCEx_SetSynchroShift(RTC_HandleTypeDef *hrtc, uint32_t ShiftAdd1S, uint32_t ShiftSubFS)

-{

-  uint32_t tickstart = 0U;

-

-  /* Check the parameters */

-  assert_param(IS_RTC_SHIFT_ADD1S(ShiftAdd1S));

-  assert_param(IS_RTC_SHIFT_SUBFS(ShiftSubFS));

-

-  /* Process Locked */

-  __HAL_LOCK(hrtc);

-

-  hrtc->State = HAL_RTC_STATE_BUSY;

-

-  /* Disable the write protection for RTC registers */

-  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);

-

-  tickstart = HAL_GetTick();

-

-  /* Wait until the shift is completed*/

-  while ((hrtc->Instance->ISR & RTC_ISR_SHPF) != RESET)

-  {

-    if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE)

-    {

-      /* Enable the write protection for RTC registers */

-      __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);

-

-      hrtc->State = HAL_RTC_STATE_TIMEOUT;

-

-      /* Process Unlocked */

-      __HAL_UNLOCK(hrtc);

-

-      return HAL_TIMEOUT;

-    }

-  }

-

-  /* Check if the reference clock detection is disabled */

-  if ((hrtc->Instance->CR & RTC_CR_REFCKON) == RESET)

-  {

-    /* Configure the Shift settings */

-    hrtc->Instance->SHIFTR = (uint32_t)(uint32_t)(ShiftSubFS) | (uint32_t)(ShiftAdd1S);

-

-    /* If  RTC_CR_BYPSHAD bit = 0, wait for synchro else this check is not needed */

-    if ((hrtc->Instance->CR & RTC_CR_BYPSHAD) == RESET)

-    {

-      if (HAL_RTC_WaitForSynchro(hrtc) != HAL_OK)

-      {

-        /* Enable the write protection for RTC registers */

-        __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);

-

-        hrtc->State = HAL_RTC_STATE_ERROR;

-

-        /* Process Unlocked */

-        __HAL_UNLOCK(hrtc);

-

-        return HAL_ERROR;

-      }

-    }

-  }

-  else

-  {

-    /* Enable the write protection for RTC registers */

-    __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);

-

-    /* Change RTC state */

-    hrtc->State = HAL_RTC_STATE_ERROR;

-

-    /* Process Unlocked */

-    __HAL_UNLOCK(hrtc);

-

-    return HAL_ERROR;

-  }

-

-  /* Enable the write protection for RTC registers */

-  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);

-

-  /* Change RTC state */

-  hrtc->State = HAL_RTC_STATE_READY;

-

-  /* Process Unlocked */

-  __HAL_UNLOCK(hrtc);

-

-  return HAL_OK;

-}

-

-/**

-  * @brief  Configure the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz).

-  * @param  hrtc RTC handle

-  * @param  CalibOutput Select the Calibration output Selection .

-  *          This parameter can be one of the following values:

-  *             @arg RTC_CALIBOUTPUT_512HZ: A signal has a regular waveform at 512Hz.

-  *             @arg RTC_CALIBOUTPUT_1HZ: A signal has a regular waveform at 1Hz.

-  * @retval HAL status

-  */

-HAL_StatusTypeDef HAL_RTCEx_SetCalibrationOutPut(RTC_HandleTypeDef *hrtc, uint32_t CalibOutput)

-{

-  /* Check the parameters */

-  assert_param(IS_RTC_CALIB_OUTPUT(CalibOutput));

-

-  /* Process Locked */

-  __HAL_LOCK(hrtc);

-

-  hrtc->State = HAL_RTC_STATE_BUSY;

-

-  /* Disable the write protection for RTC registers */

-  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);

-

-  /* Clear flags before config */

-  hrtc->Instance->CR &= (uint32_t)~RTC_CR_COSEL;

-

-  /* Configure the RTC_CR register */

-  hrtc->Instance->CR |= (uint32_t)CalibOutput;

-

-  __HAL_RTC_CALIBRATION_OUTPUT_ENABLE(hrtc);

-

-  /* Enable the write protection for RTC registers */

-  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);

-

-  /* Change RTC state */

-  hrtc->State = HAL_RTC_STATE_READY;

-

-  /* Process Unlocked */

-  __HAL_UNLOCK(hrtc);

-

-  return HAL_OK;

-}

-

-/**

-  * @brief  Deactivate the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz).

-  * @param  hrtc RTC handle

-  * @retval HAL status

-  */

-HAL_StatusTypeDef HAL_RTCEx_DeactivateCalibrationOutPut(RTC_HandleTypeDef *hrtc)

-{

-  /* Process Locked */

-  __HAL_LOCK(hrtc);

-

-  hrtc->State = HAL_RTC_STATE_BUSY;

-

-  /* Disable the write protection for RTC registers */

-  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);

-

-  __HAL_RTC_CALIBRATION_OUTPUT_DISABLE(hrtc);

-

-  /* Enable the write protection for RTC registers */

-  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);

-

-  /* Change RTC state */

-  hrtc->State = HAL_RTC_STATE_READY;

-

-  /* Process Unlocked */

-  __HAL_UNLOCK(hrtc);

-

-  return HAL_OK;

-}

-

-/**

-  * @brief  Enable the RTC reference clock detection.

-  * @param  hrtc RTC handle

-  * @retval HAL status

-  */

-HAL_StatusTypeDef HAL_RTCEx_SetRefClock(RTC_HandleTypeDef *hrtc)

-{

-  /* Process Locked */

-  __HAL_LOCK(hrtc);

-

-  hrtc->State = HAL_RTC_STATE_BUSY;

-

-  /* Disable the write protection for RTC registers */

-  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);

-

-  /* Set Initialization mode */

-  if (RTC_EnterInitMode(hrtc) != HAL_OK)

-  {

-    /* Enable the write protection for RTC registers */

-    __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);

-

-    /* Set RTC state*/

-    hrtc->State = HAL_RTC_STATE_ERROR;

-

-    /* Process Unlocked */

-    __HAL_UNLOCK(hrtc);

-

-    return HAL_ERROR;

-  }

-  else

-  {

-    __HAL_RTC_CLOCKREF_DETECTION_ENABLE(hrtc);

-

-    /* Exit Initialization mode */

-    hrtc->Instance->ISR &= (uint32_t)~RTC_ISR_INIT;

-  }

-

-  /* Enable the write protection for RTC registers */

-  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);

-

-  /* Change RTC state */

-  hrtc->State = HAL_RTC_STATE_READY;

-

-  /* Process Unlocked */

-  __HAL_UNLOCK(hrtc);

-

-  return HAL_OK;

-}

-

-/**

-  * @brief  Disable the RTC reference clock detection.

-  * @param  hrtc RTC handle

-  * @retval HAL status

-  */

-HAL_StatusTypeDef HAL_RTCEx_DeactivateRefClock(RTC_HandleTypeDef *hrtc)

-{

-  /* Process Locked */

-  __HAL_LOCK(hrtc);

-

-  hrtc->State = HAL_RTC_STATE_BUSY;

-

-  /* Disable the write protection for RTC registers */

-  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);

-

-  /* Set Initialization mode */

-  if (RTC_EnterInitMode(hrtc) != HAL_OK)

-  {

-    /* Enable the write protection for RTC registers */

-    __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);

-

-    /* Set RTC state*/

-    hrtc->State = HAL_RTC_STATE_ERROR;

-

-    /* Process Unlocked */

-    __HAL_UNLOCK(hrtc);

-

-    return HAL_ERROR;

-  }

-  else

-  {

-    __HAL_RTC_CLOCKREF_DETECTION_DISABLE(hrtc);

-

-    /* Exit Initialization mode */

-    hrtc->Instance->ISR &= (uint32_t)~RTC_ISR_INIT;

-  }

-

-  /* Enable the write protection for RTC registers */

-  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);

-

-  /* Change RTC state */

-  hrtc->State = HAL_RTC_STATE_READY;

-

-  /* Process Unlocked */

-  __HAL_UNLOCK(hrtc);

-

-  return HAL_OK;

-}

-

-/**

-  * @brief  Enable the Bypass Shadow feature.

-  * @param  hrtc RTC handle

-  * @note   When the Bypass Shadow is enabled the calendar value are taken

-  *         directly from the Calendar counter.

-  * @retval HAL status

-  */

-HAL_StatusTypeDef HAL_RTCEx_EnableBypassShadow(RTC_HandleTypeDef *hrtc)

-{

-  /* Process Locked */

-  __HAL_LOCK(hrtc);

-

-  hrtc->State = HAL_RTC_STATE_BUSY;

-

-  /* Disable the write protection for RTC registers */

-  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);

-

-  /* Set the BYPSHAD bit */

-  hrtc->Instance->CR |= (uint8_t)RTC_CR_BYPSHAD;

-

-  /* Enable the write protection for RTC registers */

-  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);

-

-  /* Change RTC state */

-  hrtc->State = HAL_RTC_STATE_READY;

-

-  /* Process Unlocked */

-  __HAL_UNLOCK(hrtc);

-

-  return HAL_OK;

-}

-

-/**

-  * @brief  Disable the Bypass Shadow feature.

-  * @param  hrtc RTC handle

-  * @note   When the Bypass Shadow is enabled the calendar value are taken

-  *         directly from the Calendar counter.

-  * @retval HAL status

-  */

-HAL_StatusTypeDef HAL_RTCEx_DisableBypassShadow(RTC_HandleTypeDef *hrtc)

-{

-  /* Process Locked */

-  __HAL_LOCK(hrtc);

-

-  hrtc->State = HAL_RTC_STATE_BUSY;

-

-  /* Disable the write protection for RTC registers */

-  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);

-

-  /* Reset the BYPSHAD bit */

-  hrtc->Instance->CR &= ((uint8_t)~RTC_CR_BYPSHAD);

-

-  /* Enable the write protection for RTC registers */

-  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);

-

-  /* Change RTC state */

-  hrtc->State = HAL_RTC_STATE_READY;

-

-  /* Process Unlocked */

-  __HAL_UNLOCK(hrtc);

-

-  return HAL_OK;

-}

-

-/**

-  * @}

-  */

-

-/**

-  * @}

-  */

-

-#endif /* HAL_RTC_MODULE_ENABLED */

-

-/**

-  * @}

-  */

-

-/**

-  * @}

-  */

-

-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/