Move firmware into subdirectory

1 files changed, 0 insertions, 520 deletions

diff --git a/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_crc.c b/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_crc.c
deleted file mode 100644
index f78e66b..0000000
--- a/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_crc.c
+++ /dev/null
@@ -1,520 +0,0 @@
-/**

-  ******************************************************************************

-  * @file    stm32f0xx_hal_crc.c

-  * @author  MCD Application Team

-  * @brief   CRC HAL module driver.

-  *          This file provides firmware functions to manage the following

-  *          functionalities of the Cyclic Redundancy Check (CRC) peripheral:

-  *           + Initialization and de-initialization functions

-  *           + Peripheral Control functions

-  *           + Peripheral State functions

-  *

-  @verbatim

- ===============================================================================

-                     ##### How to use this driver #####

- ===============================================================================

-    [..]

-         (+) Enable CRC AHB clock using __HAL_RCC_CRC_CLK_ENABLE();

-         (+) Initialize CRC calculator

-             (++) specify generating polynomial (peripheral default or non-default one)

-             (++) specify initialization value (peripheral default or non-default one)

-             (++) specify input data format

-             (++) specify input or output data inversion mode if any

-         (+) Use HAL_CRC_Accumulate() function to compute the CRC value of the

-             input data buffer starting with the previously computed CRC as

-             initialization value

-         (+) Use HAL_CRC_Calculate() function to compute the CRC value of the

-             input data buffer starting with the defined initialization value

-             (default or non-default) to initiate CRC calculation

-

-  @endverbatim

-  ******************************************************************************

-  * @attention

-  *

-  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.

-  * All rights reserved.</center></h2>

-  *

-  * This software component is licensed by ST under BSD 3-Clause license,

-  * the "License"; You may not use this file except in compliance with the

-  * License. You may obtain a copy of the License at:

-  *                        opensource.org/licenses/BSD-3-Clause

-  *

-  ******************************************************************************

-  */

-

-/* Includes ------------------------------------------------------------------*/

-#include "stm32f0xx_hal.h"

-

-/** @addtogroup STM32F0xx_HAL_Driver

-  * @{

-  */

-

-/** @defgroup CRC CRC

-  * @brief CRC HAL module driver.

-  * @{

-  */

-

-#ifdef HAL_CRC_MODULE_ENABLED

-

-/* Private typedef -----------------------------------------------------------*/

-/* Private define ------------------------------------------------------------*/

-/* Private macro -------------------------------------------------------------*/

-/* Private variables ---------------------------------------------------------*/

-/* Private function prototypes -----------------------------------------------*/

-/** @defgroup CRC_Private_Functions CRC Private Functions

- * @{

- */

-static uint32_t CRC_Handle_8(CRC_HandleTypeDef *hcrc, uint8_t pBuffer[], uint32_t BufferLength);

-static uint32_t CRC_Handle_16(CRC_HandleTypeDef *hcrc, uint16_t pBuffer[], uint32_t BufferLength);

-/**

-  * @}

-  */

-

-/* Exported functions --------------------------------------------------------*/

-

-/** @defgroup CRC_Exported_Functions CRC Exported Functions

-  * @{

-  */

-

-/** @defgroup CRC_Exported_Functions_Group1 Initialization and de-initialization functions

- *  @brief    Initialization and Configuration functions.

- *

-@verbatim

- ===============================================================================

-            ##### Initialization and de-initialization functions #####

- ===============================================================================

-    [..]  This section provides functions allowing to:

-      (+) Initialize the CRC according to the specified parameters

-          in the CRC_InitTypeDef and create the associated handle

-      (+) DeInitialize the CRC peripheral

-      (+) Initialize the CRC MSP (MCU Specific Package)

-      (+) DeInitialize the CRC MSP

-

-@endverbatim

-  * @{

-  */

-

-/**

-  * @brief  Initialize the CRC according to the specified

-  *         parameters in the CRC_InitTypeDef and create the associated handle.

-  * @param  hcrc CRC handle

-  * @retval HAL status

-  */

-HAL_StatusTypeDef HAL_CRC_Init(CRC_HandleTypeDef *hcrc)

-{

-  /* Check the CRC handle allocation */

-  if (hcrc == NULL)

-  {

-    return HAL_ERROR;

-  }

-

-  /* Check the parameters */

-  assert_param(IS_CRC_ALL_INSTANCE(hcrc->Instance));

-

-  if (hcrc->State == HAL_CRC_STATE_RESET)

-  {

-    /* Allocate lock resource and initialize it */

-    hcrc->Lock = HAL_UNLOCKED;

-    /* Init the low level hardware */

-    HAL_CRC_MspInit(hcrc);

-  }

-

-  hcrc->State = HAL_CRC_STATE_BUSY;

-

-#if defined(CRC_POL_POL)

-  /* check whether or not non-default generating polynomial has been

-   * picked up by user */

-  assert_param(IS_DEFAULT_POLYNOMIAL(hcrc->Init.DefaultPolynomialUse));

-  if (hcrc->Init.DefaultPolynomialUse == DEFAULT_POLYNOMIAL_ENABLE)

-  {

-    /* initialize peripheral with default generating polynomial */

-    WRITE_REG(hcrc->Instance->POL, DEFAULT_CRC32_POLY);

-    MODIFY_REG(hcrc->Instance->CR, CRC_CR_POLYSIZE, CRC_POLYLENGTH_32B);

-  }

-  else

-  {

-    /* initialize CRC peripheral with generating polynomial defined by user */

-    if (HAL_CRCEx_Polynomial_Set(hcrc, hcrc->Init.GeneratingPolynomial, hcrc->Init.CRCLength) != HAL_OK)

-    {

-      return HAL_ERROR;

-    }

-  }

-#endif /* CRC_POL_POL */

-

-  /* check whether or not non-default CRC initial value has been

-   * picked up by user */

-  assert_param(IS_DEFAULT_INIT_VALUE(hcrc->Init.DefaultInitValueUse));

-  if (hcrc->Init.DefaultInitValueUse == DEFAULT_INIT_VALUE_ENABLE)

-  {

-    WRITE_REG(hcrc->Instance->INIT, DEFAULT_CRC_INITVALUE);

-  }

-  else

-  {

-    WRITE_REG(hcrc->Instance->INIT, hcrc->Init.InitValue);

-  }

-

-

-  /* set input data inversion mode */

-  assert_param(IS_CRC_INPUTDATA_INVERSION_MODE(hcrc->Init.InputDataInversionMode));

-  MODIFY_REG(hcrc->Instance->CR, CRC_CR_REV_IN, hcrc->Init.InputDataInversionMode);

-

-  /* set output data inversion mode */

-  assert_param(IS_CRC_OUTPUTDATA_INVERSION_MODE(hcrc->Init.OutputDataInversionMode));

-  MODIFY_REG(hcrc->Instance->CR, CRC_CR_REV_OUT, hcrc->Init.OutputDataInversionMode);

-

-  /* makes sure the input data format (bytes, halfwords or words stream)

-   * is properly specified by user */

-  assert_param(IS_CRC_INPUTDATA_FORMAT(hcrc->InputDataFormat));

-

-  /* Change CRC peripheral state */

-  hcrc->State = HAL_CRC_STATE_READY;

-

-  /* Return function status */

-  return HAL_OK;

-}

-

-/**

-  * @brief  DeInitialize the CRC peripheral.

-  * @param  hcrc CRC handle

-  * @retval HAL status

-  */

-HAL_StatusTypeDef HAL_CRC_DeInit(CRC_HandleTypeDef *hcrc)

-{

-  /* Check the CRC handle allocation */

-  if (hcrc == NULL)

-  {

-    return HAL_ERROR;

-  }

-

-  /* Check the parameters */

-  assert_param(IS_CRC_ALL_INSTANCE(hcrc->Instance));

-

-  /* Check the CRC peripheral state */

-  if (hcrc->State == HAL_CRC_STATE_BUSY)

-  {

-    return HAL_BUSY;

-  }

-

-  /* Change CRC peripheral state */

-  hcrc->State = HAL_CRC_STATE_BUSY;

-

-  /* Reset CRC calculation unit */

-  __HAL_CRC_DR_RESET(hcrc);

-

-  /* Reset IDR register content */

-  CLEAR_BIT(hcrc->Instance->IDR, CRC_IDR_IDR);

-

-  /* DeInit the low level hardware */

-  HAL_CRC_MspDeInit(hcrc);

-

-  /* Change CRC peripheral state */

-  hcrc->State = HAL_CRC_STATE_RESET;

-

-  /* Process unlocked */

-  __HAL_UNLOCK(hcrc);

-

-  /* Return function status */

-  return HAL_OK;

-}

-

-/**

-  * @brief  Initializes the CRC MSP.

-  * @param  hcrc CRC handle

-  * @retval None

-  */

-__weak void HAL_CRC_MspInit(CRC_HandleTypeDef *hcrc)

-{

-  /* Prevent unused argument(s) compilation warning */

-  UNUSED(hcrc);

-

-  /* NOTE : This function should not be modified, when the callback is needed,

-            the HAL_CRC_MspInit can be implemented in the user file

-   */

-}

-

-/**

-  * @brief  DeInitialize the CRC MSP.

-  * @param  hcrc CRC handle

-  * @retval None

-  */

-__weak void HAL_CRC_MspDeInit(CRC_HandleTypeDef *hcrc)

-{

-  /* Prevent unused argument(s) compilation warning */

-  UNUSED(hcrc);

-

-  /* NOTE : This function should not be modified, when the callback is needed,

-            the HAL_CRC_MspDeInit can be implemented in the user file

-   */

-}

-

-/**

-  * @}

-  */

-

-/** @defgroup CRC_Exported_Functions_Group2 Peripheral Control functions

- *  @brief    management functions.

- *

-@verbatim

- ===============================================================================

-                      ##### Peripheral Control functions #####

- ===============================================================================

-    [..]  This section provides functions allowing to:

-      (+) compute the 7, 8, 16 or 32-bit CRC value of an 8, 16 or 32-bit data buffer

-          using combination of the previous CRC value and the new one.

-

-       [..]  or

-

-      (+) compute the 7, 8, 16 or 32-bit CRC value of an 8, 16 or 32-bit data buffer

-          independently of the previous CRC value.

-

-@endverbatim

-  * @{

-  */

-

-/**

-  * @brief  Compute the 7, 8, 16 or 32-bit CRC value of an 8, 16 or 32-bit data buffer

-  *         starting with the previously computed CRC as initialization value.

-  * @param  hcrc CRC handle

-  * @param  pBuffer pointer to the input data buffer, exact input data format is

-  *         provided by hcrc->InputDataFormat.

-  * @param  BufferLength input data buffer length (number of bytes if pBuffer

-  *         type is * uint8_t, number of half-words if pBuffer type is * uint16_t,

-  *         number of words if pBuffer type is * uint32_t).

-  * @note  By default, the API expects a uint32_t pointer as input buffer parameter.

-  *        Input buffer pointers with other types simply need to be cast in uint32_t

-  *        and the API will internally adjust its input data processing based on the

-  *        handle field hcrc->InputDataFormat.

-  * @retval uint32_t CRC (returned value LSBs for CRC shorter than 32 bits)

-  */

-uint32_t HAL_CRC_Accumulate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength)

-{

-  uint32_t index;      /* CRC input data buffer index */

-  uint32_t temp = 0U;  /* CRC output (read from hcrc->Instance->DR register) */

-

-  /* Change CRC peripheral state */

-  hcrc->State = HAL_CRC_STATE_BUSY;

-

-  switch (hcrc->InputDataFormat)

-  {

-    case CRC_INPUTDATA_FORMAT_WORDS:

-      /* Enter Data to the CRC calculator */

-      for (index = 0U; index < BufferLength; index++)

-      {

-        hcrc->Instance->DR = pBuffer[index];

-      }

-      temp = hcrc->Instance->DR;

-      break;

-

-    case CRC_INPUTDATA_FORMAT_BYTES:

-      temp = CRC_Handle_8(hcrc, (uint8_t *)pBuffer, BufferLength);

-      break;

-

-    case CRC_INPUTDATA_FORMAT_HALFWORDS:

-      temp = CRC_Handle_16(hcrc, (uint16_t *)(void *)pBuffer, BufferLength);    /* Derogation MisraC2012 R.11.5 */

-      break;

-    default:

-      break;

-  }

-

-  /* Change CRC peripheral state */

-  hcrc->State = HAL_CRC_STATE_READY;

-

-  /* Return the CRC computed value */

-  return temp;

-}

-

-/**

-  * @brief  Compute the 7, 8, 16 or 32-bit CRC value of an 8, 16 or 32-bit data buffer

-  *         starting with hcrc->Instance->INIT as initialization value.

-  * @param  hcrc CRC handle

-  * @param  pBuffer pointer to the input data buffer, exact input data format is

-  *         provided by hcrc->InputDataFormat.

-  * @param  BufferLength input data buffer length (number of bytes if pBuffer

-  *         type is * uint8_t, number of half-words if pBuffer type is * uint16_t,

-  *         number of words if pBuffer type is * uint32_t).

-  * @note  By default, the API expects a uint32_t pointer as input buffer parameter.

-  *        Input buffer pointers with other types simply need to be cast in uint32_t

-  *        and the API will internally adjust its input data processing based on the

-  *        handle field hcrc->InputDataFormat.

-  * @retval uint32_t CRC (returned value LSBs for CRC shorter than 32 bits)

-  */

-uint32_t HAL_CRC_Calculate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength)

-{

-  uint32_t index;      /* CRC input data buffer index */

-  uint32_t temp = 0U;  /* CRC output (read from hcrc->Instance->DR register) */

-

-  /* Change CRC peripheral state */

-  hcrc->State = HAL_CRC_STATE_BUSY;

-

-  /* Reset CRC Calculation Unit (hcrc->Instance->INIT is

-  *  written in hcrc->Instance->DR) */

-  __HAL_CRC_DR_RESET(hcrc);

-

-  switch (hcrc->InputDataFormat)

-  {

-    case CRC_INPUTDATA_FORMAT_WORDS:

-      /* Enter 32-bit input data to the CRC calculator */

-      for (index = 0U; index < BufferLength; index++)

-      {

-        hcrc->Instance->DR = pBuffer[index];

-      }

-      temp = hcrc->Instance->DR;

-      break;

-

-    case CRC_INPUTDATA_FORMAT_BYTES:

-      /* Specific 8-bit input data handling  */

-      temp = CRC_Handle_8(hcrc, (uint8_t *)pBuffer, BufferLength);

-      break;

-

-    case CRC_INPUTDATA_FORMAT_HALFWORDS:

-      /* Specific 16-bit input data handling  */

-      temp = CRC_Handle_16(hcrc, (uint16_t *)(void *)pBuffer, BufferLength);    /* Derogation MisraC2012 R.11.5 */

-      break;

-

-    default:

-      break;

-  }

-

-  /* Change CRC peripheral state */

-  hcrc->State = HAL_CRC_STATE_READY;

-

-  /* Return the CRC computed value */

-  return temp;

-}

-

-/**

-  * @}

-  */

-

-/** @defgroup CRC_Exported_Functions_Group3 Peripheral State functions

- *  @brief    Peripheral State functions.

- *

-@verbatim

- ===============================================================================

-                      ##### Peripheral State functions #####

- ===============================================================================

-    [..]

-    This subsection permits to get in run-time the status of the peripheral.

-

-@endverbatim

-  * @{

-  */

-

-/**

-  * @brief  Return the CRC handle state.

-  * @param  hcrc CRC handle

-  * @retval HAL state

-  */

-HAL_CRC_StateTypeDef HAL_CRC_GetState(CRC_HandleTypeDef *hcrc)

-{

-  /* Return CRC handle state */

-  return hcrc->State;

-}

-

-/**

-  * @}

-  */

-

-/**

-  * @}

-  */

-

-/** @addtogroup CRC_Private_Functions

- * @{

- */

-

-/**

-  * @brief  Enter 8-bit input data to the CRC calculator.

-  *         Specific data handling to optimize processing time.

-  * @param  hcrc CRC handle

-  * @param  pBuffer pointer to the input data buffer

-  * @param  BufferLength input data buffer length

-  * @retval uint32_t CRC (returned value LSBs for CRC shorter than 32 bits)

-  */

-static uint32_t CRC_Handle_8(CRC_HandleTypeDef *hcrc, uint8_t pBuffer[], uint32_t BufferLength)

-{

-  uint32_t i; /* input data buffer index */

-  uint16_t data;

-  __IO uint16_t *pReg;

-

-  /* Processing time optimization: 4 bytes are entered in a row with a single word write,

-   * last bytes must be carefully fed to the CRC calculator to ensure a correct type

-   * handling by the peripheral */

-  for (i = 0U; i < (BufferLength / 4U); i++)

-  {

-    hcrc->Instance->DR = ((uint32_t)pBuffer[4U * i] << 24U) | \

-                         ((uint32_t)pBuffer[(4U * i) + 1U] << 16U) | \

-                         ((uint32_t)pBuffer[(4U * i) + 2U] << 8U)  | \

-                         (uint32_t)pBuffer[(4U * i) + 3U];

-  }

-  /* last bytes specific handling */

-  if ((BufferLength % 4U) != 0U)

-  {

-    if ((BufferLength % 4U) == 1U)

-    {

-      *(__IO uint8_t *)(__IO void *)(&hcrc->Instance->DR) = pBuffer[4U * i];         /* Derogation MisraC2012 R.11.5 */

-    }

-    if ((BufferLength % 4U) == 2U)

-    {

-      data = ((uint16_t)(pBuffer[4U * i]) << 8U) | (uint16_t)pBuffer[(4U * i) + 1U];

-      pReg = (__IO uint16_t *)(__IO void *)(&hcrc->Instance->DR);                    /* Derogation MisraC2012 R.11.5 */

-      *pReg = data;

-    }

-    if ((BufferLength % 4U) == 3U)

-    {

-      data = ((uint16_t)(pBuffer[4U * i]) << 8U) | (uint16_t)pBuffer[(4U * i) + 1U];

-      pReg = (__IO uint16_t *)(__IO void *)(&hcrc->Instance->DR);                    /* Derogation MisraC2012 R.11.5 */

-      *pReg = data;

-

-      *(__IO uint8_t *)(__IO void *)(&hcrc->Instance->DR) = pBuffer[(4U * i) + 2U];  /* Derogation MisraC2012 R.11.5 */

-    }

-  }

-

-  /* Return the CRC computed value */

-  return hcrc->Instance->DR;

-}

-

-/**

-  * @brief  Enter 16-bit input data to the CRC calculator.

-  *         Specific data handling to optimize processing time.

-  * @param  hcrc CRC handle

-  * @param  pBuffer pointer to the input data buffer

-  * @param  BufferLength input data buffer length

-  * @retval uint32_t CRC (returned value LSBs for CRC shorter than 32 bits)

-  */

-static uint32_t CRC_Handle_16(CRC_HandleTypeDef *hcrc, uint16_t pBuffer[], uint32_t BufferLength)

-{

-  uint32_t i;  /* input data buffer index */

-  __IO uint16_t *pReg;

-

-  /* Processing time optimization: 2 HalfWords are entered in a row with a single word write,

-   * in case of odd length, last HalfWord must be carefully fed to the CRC calculator to ensure

-   * a correct type handling by the peripheral */

-  for (i = 0U; i < (BufferLength / 2U); i++)

-  {

-    hcrc->Instance->DR = ((uint32_t)pBuffer[2U * i] << 16U) | (uint32_t)pBuffer[(2U * i) + 1U];

-  }

-  if ((BufferLength % 2U) != 0U)

-  {

-    pReg = (__IO uint16_t *)(__IO void *)(&hcrc->Instance->DR);                 /* Derogation MisraC2012 R.11.5 */

-    *pReg = pBuffer[2U * i];

-  }

-

-  /* Return the CRC computed value */

-  return hcrc->Instance->DR;

-}

-

-/**

-  * @}

-  */

-

-#endif /* HAL_CRC_MODULE_ENABLED */

-/**

-  * @}

-  */

-

-/**

-  * @}

-  */

-

-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/