Move firmware into subdirectory

1 files changed, 0 insertions, 514 deletions

diff --git a/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.c b/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.c
deleted file mode 100644
index 5651040..0000000
--- a/hid-dials/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal.c
+++ /dev/null
@@ -1,514 +0,0 @@
-/**

-  ******************************************************************************

-  * @file    stm32f0xx_hal.c

-  * @author  MCD Application Team

-  * @brief   HAL module driver.

-  *          This is the common part of the HAL initialization

-  *

-  @verbatim

-  ==============================================================================

-                     ##### How to use this driver #####

-  ==============================================================================

-    [..]

-    The common HAL driver contains a set of generic and common APIs that can be

-    used by the PPP peripheral drivers and the user to start using the HAL. 

-    [..]

-    The HAL contains two APIs categories:

-         (+) HAL Initialization and de-initialization functions

-         (+) HAL Control functions

-

-  @endverbatim

-  ******************************************************************************

-  * @attention

-  *

-  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.

-  * All rights reserved.</center></h2>

-  *

-  * This software component is licensed by ST under BSD 3-Clause license,

-  * the "License"; You may not use this file except in compliance with the

-  * License. You may obtain a copy of the License at:

-  *                        opensource.org/licenses/BSD-3-Clause

-  *

-  ******************************************************************************

-  */

-

-/* Includes ------------------------------------------------------------------*/

-#include "stm32f0xx_hal.h"

-

-/** @addtogroup STM32F0xx_HAL_Driver

-  * @{

-  */

-

-/** @defgroup HAL HAL

-  * @brief HAL module driver.

-  * @{

-  */

-

-#ifdef HAL_MODULE_ENABLED

-

-/* Private typedef -----------------------------------------------------------*/

-/* Private define ------------------------------------------------------------*/

-/** @defgroup HAL_Private_Constants HAL Private Constants

-  * @{

-  */

-/** 

-  * @brief STM32F0xx HAL Driver version number V1.7.3

-  */

-#define __STM32F0xx_HAL_VERSION_MAIN   (0x01U) /*!< [31:24] main version */

-#define __STM32F0xx_HAL_VERSION_SUB1   (0x07U) /*!< [23:16] sub1 version */

-#define __STM32F0xx_HAL_VERSION_SUB2   (0x03U) /*!< [15:8]  sub2 version */

-#define __STM32F0xx_HAL_VERSION_RC     (0x00U) /*!< [7:0]  release candidate */ 

-#define __STM32F0xx_HAL_VERSION         ((__STM32F0xx_HAL_VERSION_MAIN << 24U)\

-                                        |(__STM32F0xx_HAL_VERSION_SUB1 << 16U)\

-                                        |(__STM32F0xx_HAL_VERSION_SUB2 << 8U )\

-                                        |(__STM32F0xx_HAL_VERSION_RC))

-

-#define IDCODE_DEVID_MASK    (0x00000FFFU)

-/**

-  * @}

-  */

-

-/* Private macro -------------------------------------------------------------*/

-/** @defgroup HAL_Private_Macros HAL Private Macros

-  * @{

-  */

-/**

-  * @}

-  */

-

-/* Exported variables ---------------------------------------------------------*/

-/** @defgroup HAL_Private_Variables HAL Exported Variables

-  * @{

-  */

-__IO uint32_t uwTick;

-uint32_t uwTickPrio   = (1UL << __NVIC_PRIO_BITS); /* Invalid PRIO */

-HAL_TickFreqTypeDef uwTickFreq = HAL_TICK_FREQ_DEFAULT;  /* 1KHz */

-/**

-  * @}

-  */

-/* Private function prototypes -----------------------------------------------*/

-/* Exported functions ---------------------------------------------------------*/

-

-/** @defgroup HAL_Exported_Functions HAL Exported Functions

-  * @{

-  */

-

-/** @defgroup HAL_Exported_Functions_Group1 Initialization and de-initialization Functions 

-  * @brief    Initialization and de-initialization functions

-  *

-@verbatim

- ===============================================================================

-              ##### Initialization and de-initialization functions #####

- ===============================================================================

-   [..]  This section provides functions allowing to:

-      (+) Initializes the Flash interface, the NVIC allocation and initial clock 

-          configuration. It initializes the systick also when timeout is needed

-          and the backup domain when enabled.

-      (+) de-Initializes common part of the HAL.

-      (+) Configure The time base source to have 1ms time base with a dedicated

-          Tick interrupt priority.

-        (++) SysTick timer is used by default as source of time base, but user

-             can eventually implement his proper time base source (a general purpose 

-             timer for example or other time source), keeping in mind that Time base 

-             duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and 

-             handled in milliseconds basis.

-        (++) Time base configuration function (HAL_InitTick ()) is called automatically 

-             at the beginning of the program after reset by HAL_Init() or at any time 

-             when clock is configured, by HAL_RCC_ClockConfig(). 

-        (++) Source of time base is configured  to generate interrupts at regular 

-             time intervals. Care must be taken if HAL_Delay() is called from a 

-             peripheral ISR process, the Tick interrupt line must have higher priority 

-            (numerically lower) than the peripheral interrupt. Otherwise the caller 

-            ISR process will be blocked. 

-       (++) functions affecting time base configurations are declared as __Weak  

-             to make  override possible  in case of other  implementations in user file.

- 

-@endverbatim

-  * @{

-  */

-

-/**

-  * @brief  This function configures the Flash prefetch,

-  *        Configures time base source, NVIC and Low level hardware

-  * @note This function is called at the beginning of program after reset and before 

-  *       the clock configuration

-  * @note The time base configuration is based on HSI clock when exiting from Reset.

-  *       Once done, time base tick start incrementing.

-  *       In the default implementation,Systick is used as source of time base.

-  *       The tick variable is incremented each 1ms in its ISR.

-  * @retval HAL status

-  */

-HAL_StatusTypeDef HAL_Init(void)

-{

-  /* Configure Flash prefetch */ 

-#if (PREFETCH_ENABLE != 0)

-  __HAL_FLASH_PREFETCH_BUFFER_ENABLE();

-#endif /* PREFETCH_ENABLE */

-

-  /* Use systick as time base source and configure 1ms tick (default clock after Reset is HSI) */

-

-  HAL_InitTick(TICK_INT_PRIORITY);

-

-  /* Init the low level hardware */

-  HAL_MspInit();

-

-  /* Return function status */

-  return HAL_OK;

-}

-

-/**

-  * @brief This function de-Initialize common part of the HAL and stops the SysTick

-  *        of time base.

-  * @note This function is optional.

-  * @retval HAL status

-  */

-HAL_StatusTypeDef HAL_DeInit(void)

-{

-  /* Reset of all peripherals */

-  __HAL_RCC_APB1_FORCE_RESET();

-  __HAL_RCC_APB1_RELEASE_RESET();

-

-  __HAL_RCC_APB2_FORCE_RESET();

-  __HAL_RCC_APB2_RELEASE_RESET();

-

-  __HAL_RCC_AHB_FORCE_RESET();

-  __HAL_RCC_AHB_RELEASE_RESET();

-

-  /* De-Init the low level hardware */

-  HAL_MspDeInit();

-    

-  /* Return function status */

-  return HAL_OK;

-}

-

-/**

-  * @brief  Initialize the MSP.

-  * @retval None

-  */

-__weak void HAL_MspInit(void)

-{

-  /* NOTE : This function should not be modified, when the callback is needed,

-            the HAL_MspInit could be implemented in the user file

-   */

-}

-

-/**

-  * @brief  DeInitializes the MSP.

-  * @retval None

-  */

-__weak void HAL_MspDeInit(void)

-{

-  /* NOTE : This function should not be modified, when the callback is needed,

-            the HAL_MspDeInit could be implemented in the user file

-   */

-}

-

-/**

-  * @brief This function configures the source of the time base. 

-  *        The time source is configured  to have 1ms time base with a dedicated 

-  *        Tick interrupt priority.

-  * @note This function is called  automatically at the beginning of program after

-  *       reset by HAL_Init() or at any time when clock is reconfigured  by HAL_RCC_ClockConfig(). 

-  * @note In the default implementation, SysTick timer is the source of time base. 

-  *       It is used to generate interrupts at regular time intervals. 

-  *       Care must be taken if HAL_Delay() is called from a peripheral ISR process, 

-  *       The SysTick interrupt must have higher priority (numerically lower) 

-  *       than the peripheral interrupt. Otherwise the caller ISR process will be blocked.

-  *       The function is declared as __Weak  to be overwritten  in case of other

-  *       implementation  in user file.

-  * @param TickPriority Tick interrupt priority.

-  * @retval HAL status

-  */

-__weak HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority)

-{

-  /*Configure the SysTick to have interrupt in 1ms time basis*/

-  if (HAL_SYSTICK_Config(SystemCoreClock / (1000U / uwTickFreq)) > 0U)

-  {

-    return HAL_ERROR;

-  }

-

-  /* Configure the SysTick IRQ priority */

-  if (TickPriority < (1UL << __NVIC_PRIO_BITS))

-  {

-    HAL_NVIC_SetPriority(SysTick_IRQn, TickPriority, 0U);

-    uwTickPrio = TickPriority;

-  }

-  else

-  {

-    return HAL_ERROR;

-  }

-

-   /* Return function status */

-  return HAL_OK;

-}

-

-/**

-  * @}

-  */

-

-/** @defgroup HAL_Exported_Functions_Group2 HAL Control functions 

-  * @brief    HAL Control functions

-  *

-@verbatim

- ===============================================================================

-                      ##### HAL Control functions #####

- ===============================================================================

-    [..]  This section provides functions allowing to:

-      (+) Provide a tick value in millisecond

-      (+) Provide a blocking delay in millisecond

-      (+) Suspend the time base source interrupt

-      (+) Resume the time base source interrupt

-      (+) Get the HAL API driver version

-      (+) Get the device identifier

-      (+) Get the device revision identifier

-      (+) Enable/Disable Debug module during Sleep mode

-      (+) Enable/Disable Debug module during STOP mode

-      (+) Enable/Disable Debug module during STANDBY mode

-      

-@endverbatim

-  * @{

-  */

-

-/**

-  * @brief This function is called to increment  a global variable "uwTick"

-  *        used as application time base.

-  * @note In the default implementation, this variable is incremented each 1ms

-  *       in SysTick ISR.

-  * @note This function is declared as __weak to be overwritten in case of other 

-  *       implementations in user file.

-  * @retval None

-  */

-__weak void HAL_IncTick(void)

-{

-  uwTick += uwTickFreq;

-}

-

-/**

-  * @brief  Provides a tick value in millisecond.

-  * @note   This function is declared as __weak  to be overwritten  in case of other 

-  *       implementations in user file.

-  * @retval tick value

-  */

-__weak uint32_t HAL_GetTick(void)

-{

-  return uwTick;

-}

-

-/**

-  * @brief This function returns a tick priority.

-  * @retval tick priority

-  */

-uint32_t HAL_GetTickPrio(void)

-{

-  return uwTickPrio;

-}

-

-/**

-  * @brief Set new tick Freq.

-  * @retval status

-  */

-HAL_StatusTypeDef HAL_SetTickFreq(HAL_TickFreqTypeDef Freq)

-{

-  HAL_StatusTypeDef status  = HAL_OK;

-  HAL_TickFreqTypeDef prevTickFreq;

-

-  assert_param(IS_TICKFREQ(Freq));

-

-  if (uwTickFreq != Freq)

-  {

-    /* Back up uwTickFreq frequency */

-    prevTickFreq = uwTickFreq;

-

-    /* Update uwTickFreq global variable used by HAL_InitTick() */

-    uwTickFreq = Freq;

-

-    /* Apply the new tick Freq */

-    status = HAL_InitTick(uwTickPrio);

-

-    if (status != HAL_OK)

-    {

-      /* Restore previous tick frequency */

-      uwTickFreq = prevTickFreq;

-    }

-  }

-

-  return status;

-}

-

-/**

-  * @brief return tick frequency.

-  * @retval tick period in Hz

-  */

-HAL_TickFreqTypeDef HAL_GetTickFreq(void)

-{

-  return uwTickFreq;

-}

-

-/**

-  * @brief This function provides accurate delay (in milliseconds) based 

-  *        on variable incremented.

-  * @note In the default implementation , SysTick timer is the source of time base.

-  *       It is used to generate interrupts at regular time intervals where uwTick

-  *       is incremented.

-  * @note ThiS function is declared as __weak to be overwritten in case of other

-  *       implementations in user file.

-  * @param Delay specifies the delay time length, in milliseconds.

-  * @retval None

-  */

-__weak void HAL_Delay(uint32_t Delay)

-{

-  uint32_t tickstart = HAL_GetTick();

-  uint32_t wait = Delay;

-  

-  /* Add a freq to guarantee minimum wait */

-  if (wait < HAL_MAX_DELAY)

-  {

-    wait += (uint32_t)(uwTickFreq);

-  }

-  

-  while((HAL_GetTick() - tickstart) < wait)

-  {

-  }

-}

-

-/**

-  * @brief Suspend Tick increment.

-  * @note In the default implementation , SysTick timer is the source of time base. It is

-  *       used to generate interrupts at regular time intervals. Once HAL_SuspendTick()

-  *       is called, the the SysTick interrupt will be disabled and so Tick increment 

-  *       is suspended.

-  * @note This function is declared as __weak to be overwritten in case of other

-  *       implementations in user file.

-  * @retval None

-  */

-__weak void HAL_SuspendTick(void)

-

-{

-  /* Disable SysTick Interrupt */

-  CLEAR_BIT(SysTick->CTRL,SysTick_CTRL_TICKINT_Msk);

-}

-

-/**

-  * @brief Resume Tick increment.

-  * @note In the default implementation , SysTick timer is the source of time base. It is

-  *       used to generate interrupts at regular time intervals. Once HAL_ResumeTick()

-  *       is called, the the SysTick interrupt will be enabled and so Tick increment 

-  *       is resumed.

-  * @note This function is declared as __weak  to be overwritten  in case of other

-  *       implementations in user file.

-  * @retval None

-  */

-__weak void HAL_ResumeTick(void)

-{

-  /* Enable SysTick Interrupt */

-  SET_BIT(SysTick->CTRL,SysTick_CTRL_TICKINT_Msk);

-}

-

-/**

-  * @brief  This method returns the HAL revision

-  * @retval version 0xXYZR (8bits for each decimal, R for RC)

-  */

-uint32_t HAL_GetHalVersion(void)

-{

- return __STM32F0xx_HAL_VERSION;

-}

-

-/**

-  * @brief  Returns the device revision identifier.

-  * @retval Device revision identifier

-  */

-uint32_t HAL_GetREVID(void)

-{

-   return((DBGMCU->IDCODE) >> 16U);

-}

-

-/**

-  * @brief  Returns the device identifier.

-  * @retval Device identifier

-  */

-uint32_t HAL_GetDEVID(void)

-{

-   return((DBGMCU->IDCODE) & IDCODE_DEVID_MASK);

-}

-

-/**

-  * @brief  Returns first word of the unique device identifier (UID based on 96 bits)

-  * @retval Device identifier

-  */

-uint32_t HAL_GetUIDw0(void)

-{

-   return(READ_REG(*((uint32_t *)UID_BASE)));

-}

-

-/**

-  * @brief  Returns second word of the unique device identifier (UID based on 96 bits)

-  * @retval Device identifier

-  */

-uint32_t HAL_GetUIDw1(void)

-{

-   return(READ_REG(*((uint32_t *)(UID_BASE + 4U))));

-}

-

-/**

-  * @brief  Returns third word of the unique device identifier (UID based on 96 bits)

-  * @retval Device identifier

-  */

-uint32_t HAL_GetUIDw2(void)

-{

-   return(READ_REG(*((uint32_t *)(UID_BASE + 8U))));

-}

-

-/**

-  * @brief  Enable the Debug Module during STOP mode

-  * @retval None

-  */

-void HAL_DBGMCU_EnableDBGStopMode(void)

-{

-  SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP);

-}

-

-/**

-  * @brief  Disable the Debug Module during STOP mode

-  * @retval None

-  */

-void HAL_DBGMCU_DisableDBGStopMode(void)

-{

-  CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP);

-}

-

-/**

-  * @brief  Enable the Debug Module during STANDBY mode

-  * @retval None

-  */

-void HAL_DBGMCU_EnableDBGStandbyMode(void)

-{

-  SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY);

-}

-

-/**

-  * @brief  Disable the Debug Module during STANDBY mode

-  * @retval None

-  */

-void HAL_DBGMCU_DisableDBGStandbyMode(void)

-{

-  CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY);

-}

-

-/**

-  * @}

-  */

-

-/**

-  * @}

-  */

-

-#endif /* HAL_MODULE_ENABLED */

-/**

-  * @}

-  */

-

-/**

-  * @}

-  */

-

-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/