diff options
| author | jaseg <git@jaseg.net> | 2020-10-14 12:47:28 +0200 |
|---|---|---|
| committer | jaseg <git@jaseg.net> | 2020-10-14 12:47:28 +0200 |
| commit | 6ab94e0b318884bbcb95e2ea3835f951502e1d99 (patch) | |
| tree | 4cc5794b89f89c55ff8370ae252518ab96b5fed3 /hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_spi.h | |
| parent | 1e6e8a2062923b434b2f4f5f2a9f8c0098135b01 (diff) | |
| download | minikbd-6ab94e0b318884bbcb95e2ea3835f951502e1d99.tar.gz minikbd-6ab94e0b318884bbcb95e2ea3835f951502e1d99.tar.bz2 minikbd-6ab94e0b318884bbcb95e2ea3835f951502e1d99.zip | |
Move firmware into subdirectory
Diffstat (limited to 'hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_spi.h')
| -rw-r--r-- | hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_spi.h | 854 |
1 files changed, 0 insertions, 854 deletions
diff --git a/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_spi.h b/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_spi.h deleted file mode 100644 index 5d3e7a4..0000000 --- a/hid-dials/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_spi.h +++ /dev/null @@ -1,854 +0,0 @@ -/**
- ******************************************************************************
- * @file stm32f0xx_hal_spi.h
- * @author MCD Application Team
- * @brief Header file of SPI HAL module.
- ******************************************************************************
- * @attention
- *
- * <h2><center>© Copyright (c) 2016 STMicroelectronics.
- * All rights reserved.</center></h2>
- *
- * This software component is licensed by ST under BSD 3-Clause license,
- * the "License"; You may not use this file except in compliance with the
- * License. You may obtain a copy of the License at:
- * opensource.org/licenses/BSD-3-Clause
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef STM32F0xx_HAL_SPI_H
-#define STM32F0xx_HAL_SPI_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f0xx_hal_def.h"
-
-/** @addtogroup STM32F0xx_HAL_Driver
- * @{
- */
-
-/** @addtogroup SPI
- * @{
- */
-
-/* Exported types ------------------------------------------------------------*/
-/** @defgroup SPI_Exported_Types SPI Exported Types
- * @{
- */
-
-/**
- * @brief SPI Configuration Structure definition
- */
-typedef struct
-{
- uint32_t Mode; /*!< Specifies the SPI operating mode.
- This parameter can be a value of @ref SPI_Mode */
-
- uint32_t Direction; /*!< Specifies the SPI bidirectional mode state.
- This parameter can be a value of @ref SPI_Direction */
-
- uint32_t DataSize; /*!< Specifies the SPI data size.
- This parameter can be a value of @ref SPI_Data_Size */
-
- uint32_t CLKPolarity; /*!< Specifies the serial clock steady state.
- This parameter can be a value of @ref SPI_Clock_Polarity */
-
- uint32_t CLKPhase; /*!< Specifies the clock active edge for the bit capture.
- This parameter can be a value of @ref SPI_Clock_Phase */
-
- uint32_t NSS; /*!< Specifies whether the NSS signal is managed by
- hardware (NSS pin) or by software using the SSI bit.
- This parameter can be a value of @ref SPI_Slave_Select_management */
-
- uint32_t BaudRatePrescaler; /*!< Specifies the Baud Rate prescaler value which will be
- used to configure the transmit and receive SCK clock.
- This parameter can be a value of @ref SPI_BaudRate_Prescaler
- @note The communication clock is derived from the master
- clock. The slave clock does not need to be set. */
-
- uint32_t FirstBit; /*!< Specifies whether data transfers start from MSB or LSB bit.
- This parameter can be a value of @ref SPI_MSB_LSB_transmission */
-
- uint32_t TIMode; /*!< Specifies if the TI mode is enabled or not.
- This parameter can be a value of @ref SPI_TI_mode */
-
- uint32_t CRCCalculation; /*!< Specifies if the CRC calculation is enabled or not.
- This parameter can be a value of @ref SPI_CRC_Calculation */
-
- uint32_t CRCPolynomial; /*!< Specifies the polynomial used for the CRC calculation.
- This parameter must be an odd number between Min_Data = 1 and Max_Data = 65535 */
-
- uint32_t CRCLength; /*!< Specifies the CRC Length used for the CRC calculation.
- CRC Length is only used with Data8 and Data16, not other data size
- This parameter can be a value of @ref SPI_CRC_length */
-
- uint32_t NSSPMode; /*!< Specifies whether the NSSP signal is enabled or not .
- This parameter can be a value of @ref SPI_NSSP_Mode
- This mode is activated by the NSSP bit in the SPIx_CR2 register and
- it takes effect only if the SPI interface is configured as Motorola SPI
- master (FRF=0) with capture on the first edge (SPIx_CR1 CPHA = 0,
- CPOL setting is ignored).. */
-} SPI_InitTypeDef;
-
-/**
- * @brief HAL SPI State structure definition
- */
-typedef enum
-{
- HAL_SPI_STATE_RESET = 0x00U, /*!< Peripheral not Initialized */
- HAL_SPI_STATE_READY = 0x01U, /*!< Peripheral Initialized and ready for use */
- HAL_SPI_STATE_BUSY = 0x02U, /*!< an internal process is ongoing */
- HAL_SPI_STATE_BUSY_TX = 0x03U, /*!< Data Transmission process is ongoing */
- HAL_SPI_STATE_BUSY_RX = 0x04U, /*!< Data Reception process is ongoing */
- HAL_SPI_STATE_BUSY_TX_RX = 0x05U, /*!< Data Transmission and Reception process is ongoing */
- HAL_SPI_STATE_ERROR = 0x06U, /*!< SPI error state */
- HAL_SPI_STATE_ABORT = 0x07U /*!< SPI abort is ongoing */
-} HAL_SPI_StateTypeDef;
-
-/**
- * @brief SPI handle Structure definition
- */
-typedef struct __SPI_HandleTypeDef
-{
- SPI_TypeDef *Instance; /*!< SPI registers base address */
-
- SPI_InitTypeDef Init; /*!< SPI communication parameters */
-
- uint8_t *pTxBuffPtr; /*!< Pointer to SPI Tx transfer Buffer */
-
- uint16_t TxXferSize; /*!< SPI Tx Transfer size */
-
- __IO uint16_t TxXferCount; /*!< SPI Tx Transfer Counter */
-
- uint8_t *pRxBuffPtr; /*!< Pointer to SPI Rx transfer Buffer */
-
- uint16_t RxXferSize; /*!< SPI Rx Transfer size */
-
- __IO uint16_t RxXferCount; /*!< SPI Rx Transfer Counter */
-
- uint32_t CRCSize; /*!< SPI CRC size used for the transfer */
-
- void (*RxISR)(struct __SPI_HandleTypeDef *hspi); /*!< function pointer on Rx ISR */
-
- void (*TxISR)(struct __SPI_HandleTypeDef *hspi); /*!< function pointer on Tx ISR */
-
- DMA_HandleTypeDef *hdmatx; /*!< SPI Tx DMA Handle parameters */
-
- DMA_HandleTypeDef *hdmarx; /*!< SPI Rx DMA Handle parameters */
-
- HAL_LockTypeDef Lock; /*!< Locking object */
-
- __IO HAL_SPI_StateTypeDef State; /*!< SPI communication state */
-
- __IO uint32_t ErrorCode; /*!< SPI Error code */
-
-#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
- void (* TxCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Tx Completed callback */
- void (* RxCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Rx Completed callback */
- void (* TxRxCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI TxRx Completed callback */
- void (* TxHalfCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Tx Half Completed callback */
- void (* RxHalfCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Rx Half Completed callback */
- void (* TxRxHalfCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI TxRx Half Completed callback */
- void (* ErrorCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Error callback */
- void (* AbortCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Abort callback */
- void (* MspInitCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Msp Init callback */
- void (* MspDeInitCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Msp DeInit callback */
-
-#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
-} SPI_HandleTypeDef;
-
-#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
-/**
- * @brief HAL SPI Callback ID enumeration definition
- */
-typedef enum
-{
- HAL_SPI_TX_COMPLETE_CB_ID = 0x00U, /*!< SPI Tx Completed callback ID */
- HAL_SPI_RX_COMPLETE_CB_ID = 0x01U, /*!< SPI Rx Completed callback ID */
- HAL_SPI_TX_RX_COMPLETE_CB_ID = 0x02U, /*!< SPI TxRx Completed callback ID */
- HAL_SPI_TX_HALF_COMPLETE_CB_ID = 0x03U, /*!< SPI Tx Half Completed callback ID */
- HAL_SPI_RX_HALF_COMPLETE_CB_ID = 0x04U, /*!< SPI Rx Half Completed callback ID */
- HAL_SPI_TX_RX_HALF_COMPLETE_CB_ID = 0x05U, /*!< SPI TxRx Half Completed callback ID */
- HAL_SPI_ERROR_CB_ID = 0x06U, /*!< SPI Error callback ID */
- HAL_SPI_ABORT_CB_ID = 0x07U, /*!< SPI Abort callback ID */
- HAL_SPI_MSPINIT_CB_ID = 0x08U, /*!< SPI Msp Init callback ID */
- HAL_SPI_MSPDEINIT_CB_ID = 0x09U /*!< SPI Msp DeInit callback ID */
-
-} HAL_SPI_CallbackIDTypeDef;
-
-/**
- * @brief HAL SPI Callback pointer definition
- */
-typedef void (*pSPI_CallbackTypeDef)(SPI_HandleTypeDef *hspi); /*!< pointer to an SPI callback function */
-
-#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
-/**
- * @}
- */
-
-/* Exported constants --------------------------------------------------------*/
-/** @defgroup SPI_Exported_Constants SPI Exported Constants
- * @{
- */
-
-/** @defgroup SPI_Error_Code SPI Error Code
- * @{
- */
-#define HAL_SPI_ERROR_NONE (0x00000000U) /*!< No error */
-#define HAL_SPI_ERROR_MODF (0x00000001U) /*!< MODF error */
-#define HAL_SPI_ERROR_CRC (0x00000002U) /*!< CRC error */
-#define HAL_SPI_ERROR_OVR (0x00000004U) /*!< OVR error */
-#define HAL_SPI_ERROR_FRE (0x00000008U) /*!< FRE error */
-#define HAL_SPI_ERROR_DMA (0x00000010U) /*!< DMA transfer error */
-#define HAL_SPI_ERROR_FLAG (0x00000020U) /*!< Error on RXNE/TXE/BSY/FTLVL/FRLVL Flag */
-#define HAL_SPI_ERROR_ABORT (0x00000040U) /*!< Error during SPI Abort procedure */
-#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
-#define HAL_SPI_ERROR_INVALID_CALLBACK (0x00000080U) /*!< Invalid Callback error */
-#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
-/**
- * @}
- */
-
-/** @defgroup SPI_Mode SPI Mode
- * @{
- */
-#define SPI_MODE_SLAVE (0x00000000U)
-#define SPI_MODE_MASTER (SPI_CR1_MSTR | SPI_CR1_SSI)
-/**
- * @}
- */
-
-/** @defgroup SPI_Direction SPI Direction Mode
- * @{
- */
-#define SPI_DIRECTION_2LINES (0x00000000U)
-#define SPI_DIRECTION_2LINES_RXONLY SPI_CR1_RXONLY
-#define SPI_DIRECTION_1LINE SPI_CR1_BIDIMODE
-/**
- * @}
- */
-
-/** @defgroup SPI_Data_Size SPI Data Size
- * @{
- */
-#define SPI_DATASIZE_4BIT (0x00000300U)
-#define SPI_DATASIZE_5BIT (0x00000400U)
-#define SPI_DATASIZE_6BIT (0x00000500U)
-#define SPI_DATASIZE_7BIT (0x00000600U)
-#define SPI_DATASIZE_8BIT (0x00000700U)
-#define SPI_DATASIZE_9BIT (0x00000800U)
-#define SPI_DATASIZE_10BIT (0x00000900U)
-#define SPI_DATASIZE_11BIT (0x00000A00U)
-#define SPI_DATASIZE_12BIT (0x00000B00U)
-#define SPI_DATASIZE_13BIT (0x00000C00U)
-#define SPI_DATASIZE_14BIT (0x00000D00U)
-#define SPI_DATASIZE_15BIT (0x00000E00U)
-#define SPI_DATASIZE_16BIT (0x00000F00U)
-/**
- * @}
- */
-
-/** @defgroup SPI_Clock_Polarity SPI Clock Polarity
- * @{
- */
-#define SPI_POLARITY_LOW (0x00000000U)
-#define SPI_POLARITY_HIGH SPI_CR1_CPOL
-/**
- * @}
- */
-
-/** @defgroup SPI_Clock_Phase SPI Clock Phase
- * @{
- */
-#define SPI_PHASE_1EDGE (0x00000000U)
-#define SPI_PHASE_2EDGE SPI_CR1_CPHA
-/**
- * @}
- */
-
-/** @defgroup SPI_Slave_Select_management SPI Slave Select Management
- * @{
- */
-#define SPI_NSS_SOFT SPI_CR1_SSM
-#define SPI_NSS_HARD_INPUT (0x00000000U)
-#define SPI_NSS_HARD_OUTPUT (SPI_CR2_SSOE << 16U)
-/**
- * @}
- */
-
-/** @defgroup SPI_NSSP_Mode SPI NSS Pulse Mode
- * @{
- */
-#define SPI_NSS_PULSE_ENABLE SPI_CR2_NSSP
-#define SPI_NSS_PULSE_DISABLE (0x00000000U)
-/**
- * @}
- */
-
-/** @defgroup SPI_BaudRate_Prescaler SPI BaudRate Prescaler
- * @{
- */
-#define SPI_BAUDRATEPRESCALER_2 (0x00000000U)
-#define SPI_BAUDRATEPRESCALER_4 (SPI_CR1_BR_0)
-#define SPI_BAUDRATEPRESCALER_8 (SPI_CR1_BR_1)
-#define SPI_BAUDRATEPRESCALER_16 (SPI_CR1_BR_1 | SPI_CR1_BR_0)
-#define SPI_BAUDRATEPRESCALER_32 (SPI_CR1_BR_2)
-#define SPI_BAUDRATEPRESCALER_64 (SPI_CR1_BR_2 | SPI_CR1_BR_0)
-#define SPI_BAUDRATEPRESCALER_128 (SPI_CR1_BR_2 | SPI_CR1_BR_1)
-#define SPI_BAUDRATEPRESCALER_256 (SPI_CR1_BR_2 | SPI_CR1_BR_1 | SPI_CR1_BR_0)
-/**
- * @}
- */
-
-/** @defgroup SPI_MSB_LSB_transmission SPI MSB LSB Transmission
- * @{
- */
-#define SPI_FIRSTBIT_MSB (0x00000000U)
-#define SPI_FIRSTBIT_LSB SPI_CR1_LSBFIRST
-/**
- * @}
- */
-
-/** @defgroup SPI_TI_mode SPI TI Mode
- * @{
- */
-#define SPI_TIMODE_DISABLE (0x00000000U)
-#define SPI_TIMODE_ENABLE SPI_CR2_FRF
-/**
- * @}
- */
-
-/** @defgroup SPI_CRC_Calculation SPI CRC Calculation
- * @{
- */
-#define SPI_CRCCALCULATION_DISABLE (0x00000000U)
-#define SPI_CRCCALCULATION_ENABLE SPI_CR1_CRCEN
-/**
- * @}
- */
-
-/** @defgroup SPI_CRC_length SPI CRC Length
- * @{
- * This parameter can be one of the following values:
- * SPI_CRC_LENGTH_DATASIZE: aligned with the data size
- * SPI_CRC_LENGTH_8BIT : CRC 8bit
- * SPI_CRC_LENGTH_16BIT : CRC 16bit
- */
-#define SPI_CRC_LENGTH_DATASIZE (0x00000000U)
-#define SPI_CRC_LENGTH_8BIT (0x00000001U)
-#define SPI_CRC_LENGTH_16BIT (0x00000002U)
-/**
- * @}
- */
-
-/** @defgroup SPI_FIFO_reception_threshold SPI FIFO Reception Threshold
- * @{
- * This parameter can be one of the following values:
- * SPI_RXFIFO_THRESHOLD or SPI_RXFIFO_THRESHOLD_QF :
- * RXNE event is generated if the FIFO
- * level is greater or equal to 1/4(8-bits).
- * SPI_RXFIFO_THRESHOLD_HF: RXNE event is generated if the FIFO
- * level is greater or equal to 1/2(16 bits). */
-#define SPI_RXFIFO_THRESHOLD SPI_CR2_FRXTH
-#define SPI_RXFIFO_THRESHOLD_QF SPI_CR2_FRXTH
-#define SPI_RXFIFO_THRESHOLD_HF (0x00000000U)
-/**
- * @}
- */
-
-/** @defgroup SPI_Interrupt_definition SPI Interrupt Definition
- * @{
- */
-#define SPI_IT_TXE SPI_CR2_TXEIE
-#define SPI_IT_RXNE SPI_CR2_RXNEIE
-#define SPI_IT_ERR SPI_CR2_ERRIE
-/**
- * @}
- */
-
-/** @defgroup SPI_Flags_definition SPI Flags Definition
- * @{
- */
-#define SPI_FLAG_RXNE SPI_SR_RXNE /* SPI status flag: Rx buffer not empty flag */
-#define SPI_FLAG_TXE SPI_SR_TXE /* SPI status flag: Tx buffer empty flag */
-#define SPI_FLAG_BSY SPI_SR_BSY /* SPI status flag: Busy flag */
-#define SPI_FLAG_CRCERR SPI_SR_CRCERR /* SPI Error flag: CRC error flag */
-#define SPI_FLAG_MODF SPI_SR_MODF /* SPI Error flag: Mode fault flag */
-#define SPI_FLAG_OVR SPI_SR_OVR /* SPI Error flag: Overrun flag */
-#define SPI_FLAG_FRE SPI_SR_FRE /* SPI Error flag: TI mode frame format error flag */
-#define SPI_FLAG_FTLVL SPI_SR_FTLVL /* SPI fifo transmission level */
-#define SPI_FLAG_FRLVL SPI_SR_FRLVL /* SPI fifo reception level */
-#define SPI_FLAG_MASK (SPI_SR_RXNE | SPI_SR_TXE | SPI_SR_BSY | SPI_SR_CRCERR\
- | SPI_SR_MODF | SPI_SR_OVR | SPI_SR_FRE | SPI_SR_FTLVL | SPI_SR_FRLVL)
-/**
- * @}
- */
-
-/** @defgroup SPI_transmission_fifo_status_level SPI Transmission FIFO Status Level
- * @{
- */
-#define SPI_FTLVL_EMPTY (0x00000000U)
-#define SPI_FTLVL_QUARTER_FULL (0x00000800U)
-#define SPI_FTLVL_HALF_FULL (0x00001000U)
-#define SPI_FTLVL_FULL (0x00001800U)
-
-/**
- * @}
- */
-
-/** @defgroup SPI_reception_fifo_status_level SPI Reception FIFO Status Level
- * @{
- */
-#define SPI_FRLVL_EMPTY (0x00000000U)
-#define SPI_FRLVL_QUARTER_FULL (0x00000200U)
-#define SPI_FRLVL_HALF_FULL (0x00000400U)
-#define SPI_FRLVL_FULL (0x00000600U)
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/* Exported macros -----------------------------------------------------------*/
-/** @defgroup SPI_Exported_Macros SPI Exported Macros
- * @{
- */
-
-/** @brief Reset SPI handle state.
- * @param __HANDLE__ specifies the SPI Handle.
- * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
- * @retval None
- */
-#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
-#define __HAL_SPI_RESET_HANDLE_STATE(__HANDLE__) do{ \
- (__HANDLE__)->State = HAL_SPI_STATE_RESET; \
- (__HANDLE__)->MspInitCallback = NULL; \
- (__HANDLE__)->MspDeInitCallback = NULL; \
- } while(0)
-#else
-#define __HAL_SPI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SPI_STATE_RESET)
-#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
-
-/** @brief Enable the specified SPI interrupts.
- * @param __HANDLE__ specifies the SPI Handle.
- * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
- * @param __INTERRUPT__ specifies the interrupt source to enable.
- * This parameter can be one of the following values:
- * @arg SPI_IT_TXE: Tx buffer empty interrupt enable
- * @arg SPI_IT_RXNE: RX buffer not empty interrupt enable
- * @arg SPI_IT_ERR: Error interrupt enable
- * @retval None
- */
-#define __HAL_SPI_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT((__HANDLE__)->Instance->CR2, (__INTERRUPT__))
-
-/** @brief Disable the specified SPI interrupts.
- * @param __HANDLE__ specifies the SPI handle.
- * This parameter can be SPIx where x: 1, 2, or 3 to select the SPI peripheral.
- * @param __INTERRUPT__ specifies the interrupt source to disable.
- * This parameter can be one of the following values:
- * @arg SPI_IT_TXE: Tx buffer empty interrupt enable
- * @arg SPI_IT_RXNE: RX buffer not empty interrupt enable
- * @arg SPI_IT_ERR: Error interrupt enable
- * @retval None
- */
-#define __HAL_SPI_DISABLE_IT(__HANDLE__, __INTERRUPT__) CLEAR_BIT((__HANDLE__)->Instance->CR2, (__INTERRUPT__))
-
-/** @brief Check whether the specified SPI interrupt source is enabled or not.
- * @param __HANDLE__ specifies the SPI Handle.
- * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
- * @param __INTERRUPT__ specifies the SPI interrupt source to check.
- * This parameter can be one of the following values:
- * @arg SPI_IT_TXE: Tx buffer empty interrupt enable
- * @arg SPI_IT_RXNE: RX buffer not empty interrupt enable
- * @arg SPI_IT_ERR: Error interrupt enable
- * @retval The new state of __IT__ (TRUE or FALSE).
- */
-#define __HAL_SPI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2\
- & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
-
-/** @brief Check whether the specified SPI flag is set or not.
- * @param __HANDLE__ specifies the SPI Handle.
- * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
- * @param __FLAG__ specifies the flag to check.
- * This parameter can be one of the following values:
- * @arg SPI_FLAG_RXNE: Receive buffer not empty flag
- * @arg SPI_FLAG_TXE: Transmit buffer empty flag
- * @arg SPI_FLAG_CRCERR: CRC error flag
- * @arg SPI_FLAG_MODF: Mode fault flag
- * @arg SPI_FLAG_OVR: Overrun flag
- * @arg SPI_FLAG_BSY: Busy flag
- * @arg SPI_FLAG_FRE: Frame format error flag
- * @arg SPI_FLAG_FTLVL: SPI fifo transmission level
- * @arg SPI_FLAG_FRLVL: SPI fifo reception level
- * @retval The new state of __FLAG__ (TRUE or FALSE).
- */
-#define __HAL_SPI_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
-
-/** @brief Clear the SPI CRCERR pending flag.
- * @param __HANDLE__ specifies the SPI Handle.
- * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
- * @retval None
- */
-#define __HAL_SPI_CLEAR_CRCERRFLAG(__HANDLE__) ((__HANDLE__)->Instance->SR = (uint16_t)(~SPI_FLAG_CRCERR))
-
-/** @brief Clear the SPI MODF pending flag.
- * @param __HANDLE__ specifies the SPI Handle.
- * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
- * @retval None
- */
-#define __HAL_SPI_CLEAR_MODFFLAG(__HANDLE__) \
- do{ \
- __IO uint32_t tmpreg_modf = 0x00U; \
- tmpreg_modf = (__HANDLE__)->Instance->SR; \
- CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_SPE); \
- UNUSED(tmpreg_modf); \
- } while(0U)
-
-/** @brief Clear the SPI OVR pending flag.
- * @param __HANDLE__ specifies the SPI Handle.
- * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
- * @retval None
- */
-#define __HAL_SPI_CLEAR_OVRFLAG(__HANDLE__) \
- do{ \
- __IO uint32_t tmpreg_ovr = 0x00U; \
- tmpreg_ovr = (__HANDLE__)->Instance->DR; \
- tmpreg_ovr = (__HANDLE__)->Instance->SR; \
- UNUSED(tmpreg_ovr); \
- } while(0U)
-
-/** @brief Clear the SPI FRE pending flag.
- * @param __HANDLE__ specifies the SPI Handle.
- * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
- * @retval None
- */
-#define __HAL_SPI_CLEAR_FREFLAG(__HANDLE__) \
- do{ \
- __IO uint32_t tmpreg_fre = 0x00U; \
- tmpreg_fre = (__HANDLE__)->Instance->SR; \
- UNUSED(tmpreg_fre); \
- }while(0U)
-
-/** @brief Enable the SPI peripheral.
- * @param __HANDLE__ specifies the SPI Handle.
- * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
- * @retval None
- */
-#define __HAL_SPI_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_SPE)
-
-/** @brief Disable the SPI peripheral.
- * @param __HANDLE__ specifies the SPI Handle.
- * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
- * @retval None
- */
-#define __HAL_SPI_DISABLE(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_SPE)
-
-/**
- * @}
- */
-
-/* Private macros ------------------------------------------------------------*/
-/** @defgroup SPI_Private_Macros SPI Private Macros
- * @{
- */
-
-/** @brief Set the SPI transmit-only mode.
- * @param __HANDLE__ specifies the SPI Handle.
- * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
- * @retval None
- */
-#define SPI_1LINE_TX(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_BIDIOE)
-
-/** @brief Set the SPI receive-only mode.
- * @param __HANDLE__ specifies the SPI Handle.
- * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
- * @retval None
- */
-#define SPI_1LINE_RX(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_BIDIOE)
-
-/** @brief Reset the CRC calculation of the SPI.
- * @param __HANDLE__ specifies the SPI Handle.
- * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
- * @retval None
- */
-#define SPI_RESET_CRC(__HANDLE__) do{CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_CRCEN);\
- SET_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_CRCEN);}while(0U)
-
-/** @brief Check whether the specified SPI flag is set or not.
- * @param __SR__ copy of SPI SR regsiter.
- * @param __FLAG__ specifies the flag to check.
- * This parameter can be one of the following values:
- * @arg SPI_FLAG_RXNE: Receive buffer not empty flag
- * @arg SPI_FLAG_TXE: Transmit buffer empty flag
- * @arg SPI_FLAG_CRCERR: CRC error flag
- * @arg SPI_FLAG_MODF: Mode fault flag
- * @arg SPI_FLAG_OVR: Overrun flag
- * @arg SPI_FLAG_BSY: Busy flag
- * @arg SPI_FLAG_FRE: Frame format error flag
- * @arg SPI_FLAG_FTLVL: SPI fifo transmission level
- * @arg SPI_FLAG_FRLVL: SPI fifo reception level
- * @retval SET or RESET.
- */
-#define SPI_CHECK_FLAG(__SR__, __FLAG__) ((((__SR__) & ((__FLAG__) & SPI_FLAG_MASK)) == ((__FLAG__) & SPI_FLAG_MASK)) ? SET : RESET)
-
-/** @brief Check whether the specified SPI Interrupt is set or not.
- * @param __CR2__ copy of SPI CR2 regsiter.
- * @param __INTERRUPT__ specifies the SPI interrupt source to check.
- * This parameter can be one of the following values:
- * @arg SPI_IT_TXE: Tx buffer empty interrupt enable
- * @arg SPI_IT_RXNE: RX buffer not empty interrupt enable
- * @arg SPI_IT_ERR: Error interrupt enable
- * @retval SET or RESET.
- */
-#define SPI_CHECK_IT_SOURCE(__CR2__, __INTERRUPT__) ((((__CR2__) & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
-
-/** @brief Checks if SPI Mode parameter is in allowed range.
- * @param __MODE__ specifies the SPI Mode.
- * This parameter can be a value of @ref SPI_Mode
- * @retval None
- */
-#define IS_SPI_MODE(__MODE__) (((__MODE__) == SPI_MODE_SLAVE) || \
- ((__MODE__) == SPI_MODE_MASTER))
-
-/** @brief Checks if SPI Direction Mode parameter is in allowed range.
- * @param __MODE__ specifies the SPI Direction Mode.
- * This parameter can be a value of @ref SPI_Direction
- * @retval None
- */
-#define IS_SPI_DIRECTION(__MODE__) (((__MODE__) == SPI_DIRECTION_2LINES) || \
- ((__MODE__) == SPI_DIRECTION_2LINES_RXONLY) || \
- ((__MODE__) == SPI_DIRECTION_1LINE))
-
-/** @brief Checks if SPI Direction Mode parameter is 2 lines.
- * @param __MODE__ specifies the SPI Direction Mode.
- * @retval None
- */
-#define IS_SPI_DIRECTION_2LINES(__MODE__) ((__MODE__) == SPI_DIRECTION_2LINES)
-
-/** @brief Checks if SPI Direction Mode parameter is 1 or 2 lines.
- * @param __MODE__ specifies the SPI Direction Mode.
- * @retval None
- */
-#define IS_SPI_DIRECTION_2LINES_OR_1LINE(__MODE__) (((__MODE__) == SPI_DIRECTION_2LINES) || \
- ((__MODE__) == SPI_DIRECTION_1LINE))
-
-/** @brief Checks if SPI Data Size parameter is in allowed range.
- * @param __DATASIZE__ specifies the SPI Data Size.
- * This parameter can be a value of @ref SPI_Data_Size
- * @retval None
- */
-#define IS_SPI_DATASIZE(__DATASIZE__) (((__DATASIZE__) == SPI_DATASIZE_16BIT) || \
- ((__DATASIZE__) == SPI_DATASIZE_15BIT) || \
- ((__DATASIZE__) == SPI_DATASIZE_14BIT) || \
- ((__DATASIZE__) == SPI_DATASIZE_13BIT) || \
- ((__DATASIZE__) == SPI_DATASIZE_12BIT) || \
- ((__DATASIZE__) == SPI_DATASIZE_11BIT) || \
- ((__DATASIZE__) == SPI_DATASIZE_10BIT) || \
- ((__DATASIZE__) == SPI_DATASIZE_9BIT) || \
- ((__DATASIZE__) == SPI_DATASIZE_8BIT) || \
- ((__DATASIZE__) == SPI_DATASIZE_7BIT) || \
- ((__DATASIZE__) == SPI_DATASIZE_6BIT) || \
- ((__DATASIZE__) == SPI_DATASIZE_5BIT) || \
- ((__DATASIZE__) == SPI_DATASIZE_4BIT))
-
-/** @brief Checks if SPI Serial clock steady state parameter is in allowed range.
- * @param __CPOL__ specifies the SPI serial clock steady state.
- * This parameter can be a value of @ref SPI_Clock_Polarity
- * @retval None
- */
-#define IS_SPI_CPOL(__CPOL__) (((__CPOL__) == SPI_POLARITY_LOW) || \
- ((__CPOL__) == SPI_POLARITY_HIGH))
-
-/** @brief Checks if SPI Clock Phase parameter is in allowed range.
- * @param __CPHA__ specifies the SPI Clock Phase.
- * This parameter can be a value of @ref SPI_Clock_Phase
- * @retval None
- */
-#define IS_SPI_CPHA(__CPHA__) (((__CPHA__) == SPI_PHASE_1EDGE) || \
- ((__CPHA__) == SPI_PHASE_2EDGE))
-
-/** @brief Checks if SPI Slave Select parameter is in allowed range.
- * @param __NSS__ specifies the SPI Slave Select management parameter.
- * This parameter can be a value of @ref SPI_Slave_Select_management
- * @retval None
- */
-#define IS_SPI_NSS(__NSS__) (((__NSS__) == SPI_NSS_SOFT) || \
- ((__NSS__) == SPI_NSS_HARD_INPUT) || \
- ((__NSS__) == SPI_NSS_HARD_OUTPUT))
-
-/** @brief Checks if SPI NSS Pulse parameter is in allowed range.
- * @param __NSSP__ specifies the SPI NSS Pulse Mode parameter.
- * This parameter can be a value of @ref SPI_NSSP_Mode
- * @retval None
- */
-#define IS_SPI_NSSP(__NSSP__) (((__NSSP__) == SPI_NSS_PULSE_ENABLE) || \
- ((__NSSP__) == SPI_NSS_PULSE_DISABLE))
-
-/** @brief Checks if SPI Baudrate prescaler parameter is in allowed range.
- * @param __PRESCALER__ specifies the SPI Baudrate prescaler.
- * This parameter can be a value of @ref SPI_BaudRate_Prescaler
- * @retval None
- */
-#define IS_SPI_BAUDRATE_PRESCALER(__PRESCALER__) (((__PRESCALER__) == SPI_BAUDRATEPRESCALER_2) || \
- ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_4) || \
- ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_8) || \
- ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_16) || \
- ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_32) || \
- ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_64) || \
- ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_128) || \
- ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_256))
-
-/** @brief Checks if SPI MSB LSB transmission parameter is in allowed range.
- * @param __BIT__ specifies the SPI MSB LSB transmission (whether data transfer starts from MSB or LSB bit).
- * This parameter can be a value of @ref SPI_MSB_LSB_transmission
- * @retval None
- */
-#define IS_SPI_FIRST_BIT(__BIT__) (((__BIT__) == SPI_FIRSTBIT_MSB) || \
- ((__BIT__) == SPI_FIRSTBIT_LSB))
-
-/** @brief Checks if SPI TI mode parameter is in allowed range.
- * @param __MODE__ specifies the SPI TI mode.
- * This parameter can be a value of @ref SPI_TI_mode
- * @retval None
- */
-#define IS_SPI_TIMODE(__MODE__) (((__MODE__) == SPI_TIMODE_DISABLE) || \
- ((__MODE__) == SPI_TIMODE_ENABLE))
-
-/** @brief Checks if SPI CRC calculation enabled state is in allowed range.
- * @param __CALCULATION__ specifies the SPI CRC calculation enable state.
- * This parameter can be a value of @ref SPI_CRC_Calculation
- * @retval None
- */
-#define IS_SPI_CRC_CALCULATION(__CALCULATION__) (((__CALCULATION__) == SPI_CRCCALCULATION_DISABLE) || \
- ((__CALCULATION__) == SPI_CRCCALCULATION_ENABLE))
-
-/** @brief Checks if SPI CRC length is in allowed range.
- * @param __LENGTH__ specifies the SPI CRC length.
- * This parameter can be a value of @ref SPI_CRC_length
- * @retval None
- */
-#define IS_SPI_CRC_LENGTH(__LENGTH__) (((__LENGTH__) == SPI_CRC_LENGTH_DATASIZE) ||\
- ((__LENGTH__) == SPI_CRC_LENGTH_8BIT) || \
- ((__LENGTH__) == SPI_CRC_LENGTH_16BIT))
-
-/** @brief Checks if SPI polynomial value to be used for the CRC calculation, is in allowed range.
- * @param __POLYNOMIAL__ specifies the SPI polynomial value to be used for the CRC calculation.
- * This parameter must be a number between Min_Data = 0 and Max_Data = 65535
- * @retval None
- */
-#define IS_SPI_CRC_POLYNOMIAL(__POLYNOMIAL__) (((__POLYNOMIAL__) >= 0x1U) && ((__POLYNOMIAL__) <= 0xFFFFU) && (((__POLYNOMIAL__)&0x1U) != 0U))
-
-/** @brief Checks if DMA handle is valid.
- * @param __HANDLE__ specifies a DMA Handle.
- * @retval None
- */
-#define IS_SPI_DMA_HANDLE(__HANDLE__) ((__HANDLE__) != NULL)
-
-/** @brief Checks if a data address is 16bit aligned.
- * @param __DATA__ specifies a data address.
- * @retval None
- */
-#define IS_SPI_16BIT_ALIGNED_ADDRESS(__DATA__) (((uint32_t)(__DATA__) % 2U) == 0U)
-
-/**
- * @}
- */
-
-/* Include SPI HAL Extended module */
-#include "stm32f0xx_hal_spi_ex.h"
-
-/* Exported functions --------------------------------------------------------*/
-/** @addtogroup SPI_Exported_Functions
- * @{
- */
-
-/** @addtogroup SPI_Exported_Functions_Group1
- * @{
- */
-/* Initialization/de-initialization functions ********************************/
-HAL_StatusTypeDef HAL_SPI_Init(SPI_HandleTypeDef *hspi);
-HAL_StatusTypeDef HAL_SPI_DeInit(SPI_HandleTypeDef *hspi);
-void HAL_SPI_MspInit(SPI_HandleTypeDef *hspi);
-void HAL_SPI_MspDeInit(SPI_HandleTypeDef *hspi);
-
-/* Callbacks Register/UnRegister functions ***********************************/
-#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
-HAL_StatusTypeDef HAL_SPI_RegisterCallback(SPI_HandleTypeDef *hspi, HAL_SPI_CallbackIDTypeDef CallbackID, pSPI_CallbackTypeDef pCallback);
-HAL_StatusTypeDef HAL_SPI_UnRegisterCallback(SPI_HandleTypeDef *hspi, HAL_SPI_CallbackIDTypeDef CallbackID);
-#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
-/**
- * @}
- */
-
-/** @addtogroup SPI_Exported_Functions_Group2
- * @{
- */
-/* I/O operation functions ***************************************************/
-HAL_StatusTypeDef HAL_SPI_Transmit(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout);
-HAL_StatusTypeDef HAL_SPI_Receive(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout);
-HAL_StatusTypeDef HAL_SPI_TransmitReceive(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size,
- uint32_t Timeout);
-HAL_StatusTypeDef HAL_SPI_Transmit_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
-HAL_StatusTypeDef HAL_SPI_Receive_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
-HAL_StatusTypeDef HAL_SPI_TransmitReceive_IT(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData,
- uint16_t Size);
-HAL_StatusTypeDef HAL_SPI_Transmit_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
-HAL_StatusTypeDef HAL_SPI_Receive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
-HAL_StatusTypeDef HAL_SPI_TransmitReceive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData,
- uint16_t Size);
-HAL_StatusTypeDef HAL_SPI_DMAPause(SPI_HandleTypeDef *hspi);
-HAL_StatusTypeDef HAL_SPI_DMAResume(SPI_HandleTypeDef *hspi);
-HAL_StatusTypeDef HAL_SPI_DMAStop(SPI_HandleTypeDef *hspi);
-/* Transfer Abort functions */
-HAL_StatusTypeDef HAL_SPI_Abort(SPI_HandleTypeDef *hspi);
-HAL_StatusTypeDef HAL_SPI_Abort_IT(SPI_HandleTypeDef *hspi);
-
-void HAL_SPI_IRQHandler(SPI_HandleTypeDef *hspi);
-void HAL_SPI_TxCpltCallback(SPI_HandleTypeDef *hspi);
-void HAL_SPI_RxCpltCallback(SPI_HandleTypeDef *hspi);
-void HAL_SPI_TxRxCpltCallback(SPI_HandleTypeDef *hspi);
-void HAL_SPI_TxHalfCpltCallback(SPI_HandleTypeDef *hspi);
-void HAL_SPI_RxHalfCpltCallback(SPI_HandleTypeDef *hspi);
-void HAL_SPI_TxRxHalfCpltCallback(SPI_HandleTypeDef *hspi);
-void HAL_SPI_ErrorCallback(SPI_HandleTypeDef *hspi);
-void HAL_SPI_AbortCpltCallback(SPI_HandleTypeDef *hspi);
-/**
- * @}
- */
-
-/** @addtogroup SPI_Exported_Functions_Group3
- * @{
- */
-/* Peripheral State and Error functions ***************************************/
-HAL_SPI_StateTypeDef HAL_SPI_GetState(SPI_HandleTypeDef *hspi);
-uint32_t HAL_SPI_GetError(SPI_HandleTypeDef *hspi);
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* STM32F0xx_HAL_SPI_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|