minkbd: repo restructure

1 files changed, 0 insertions, 316 deletions

diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_ll_comp.c b/Blink/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_ll_comp.c
deleted file mode 100644
index a108f40..0000000
--- a/Blink/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_ll_comp.c
+++ /dev/null
@@ -1,316 +0,0 @@
-/**

-  ******************************************************************************

-  * @file    stm32f0xx_ll_comp.c

-  * @author  MCD Application Team

-  * @brief   COMP LL module driver

-  ******************************************************************************

-  * @attention

-  *

-  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.

-  * All rights reserved.</center></h2>

-  *

-  * This software component is licensed by ST under BSD 3-Clause license,

-  * the "License"; You may not use this file except in compliance with the

-  * License. You may obtain a copy of the License at:

-  *                        opensource.org/licenses/BSD-3-Clause

-  *

-  ******************************************************************************

-  */

-

-#if defined(USE_FULL_LL_DRIVER)

-

-/* Includes ------------------------------------------------------------------*/

-#include "stm32f0xx_ll_comp.h"

-

-#ifdef  USE_FULL_ASSERT

-  #include "stm32_assert.h"

-#else

-  #define assert_param(expr) ((void)0U)

-#endif

-

-/** @addtogroup STM32F0xx_LL_Driver

-  * @{

-  */

-

-#if defined (COMP1) || defined (COMP2)

-

-/** @addtogroup COMP_LL COMP

-  * @{

-  */

-

-/* Private types -------------------------------------------------------------*/

-/* Private variables ---------------------------------------------------------*/

-/* Private constants ---------------------------------------------------------*/

-/* Private macros ------------------------------------------------------------*/

-

-/** @addtogroup COMP_LL_Private_Macros

-  * @{

-  */

-

-/* Check of parameters for configuration of COMP hierarchical scope:          */

-/* COMP instance.                                                             */

-

-#define IS_LL_COMP_POWER_MODE(__POWER_MODE__)                                  \

-  (   ((__POWER_MODE__) == LL_COMP_POWERMODE_HIGHSPEED)                        \

-   || ((__POWER_MODE__) == LL_COMP_POWERMODE_MEDIUMSPEED)                      \

-   || ((__POWER_MODE__) == LL_COMP_POWERMODE_LOWPOWER)                         \

-   || ((__POWER_MODE__) == LL_COMP_POWERMODE_ULTRALOWPOWER)                    \

-  )

-

-/* Note: On this STM32 serie, comparator input plus parameters are            */

-/*       the different depending on COMP instances.                           */

-#define IS_LL_COMP_INPUT_PLUS(__COMP_INSTANCE__, __INPUT_PLUS__)               \

-  (((__COMP_INSTANCE__) == COMP1)                                              \

-    ? (                                                                        \

-          ((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_IO1)                         \

-       || ((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_DAC1_CH1)                    \

-      )                                                                        \

-      :                                                                        \

-      (                                                                        \

-          ((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_IO1)                         \

-      )                                                                        \

-  )

-

-/* Note: On this STM32 serie, comparator input minus parameters are           */

-/*       the same on all COMP instances.                                      */

-/*       However, comparator instance kept as macro parameter for             */

-/*       compatibility with other STM32 families.                             */

-#define IS_LL_COMP_INPUT_MINUS(__COMP_INSTANCE__, __INPUT_MINUS__)             \

-  (   ((__INPUT_MINUS__) == LL_COMP_INPUT_MINUS_1_4VREFINT)                    \

-   || ((__INPUT_MINUS__) == LL_COMP_INPUT_MINUS_1_2VREFINT)                    \

-   || ((__INPUT_MINUS__) == LL_COMP_INPUT_MINUS_3_4VREFINT)                    \

-   || ((__INPUT_MINUS__) == LL_COMP_INPUT_MINUS_VREFINT)                       \

-   || ((__INPUT_MINUS__) == LL_COMP_INPUT_MINUS_DAC1_CH1)                      \

-   || ((__INPUT_MINUS__) == LL_COMP_INPUT_MINUS_DAC1_CH2)                      \

-   || ((__INPUT_MINUS__) == LL_COMP_INPUT_MINUS_IO1)                           \

-  )

-

-#define IS_LL_COMP_INPUT_HYSTERESIS(__INPUT_HYSTERESIS__)                      \

-  (   ((__INPUT_HYSTERESIS__) == LL_COMP_HYSTERESIS_NONE)                      \

-   || ((__INPUT_HYSTERESIS__) == LL_COMP_HYSTERESIS_LOW)                       \

-   || ((__INPUT_HYSTERESIS__) == LL_COMP_HYSTERESIS_MEDIUM)                    \

-   || ((__INPUT_HYSTERESIS__) == LL_COMP_HYSTERESIS_HIGH)                      \

-  )

-

-#define IS_LL_COMP_OUTPUT_SELECTION(__OUTPUT_SELECTION__)                      \

-  (   ((__OUTPUT_SELECTION__) == LL_COMP_OUTPUT_NONE)                          \

-   || ((__OUTPUT_SELECTION__) == LL_COMP_OUTPUT_TIM1_BKIN)                     \

-   || ((__OUTPUT_SELECTION__) == LL_COMP_OUTPUT_TIM1_IC1)                      \

-   || ((__OUTPUT_SELECTION__) == LL_COMP_OUTPUT_TIM1_OCCLR)                    \

-   || ((__OUTPUT_SELECTION__) == LL_COMP_OUTPUT_TIM2_IC4)                      \

-   || ((__OUTPUT_SELECTION__) == LL_COMP_OUTPUT_TIM2_OCCLR)                    \

-   || ((__OUTPUT_SELECTION__) == LL_COMP_OUTPUT_TIM3_IC1)                      \

-   || ((__OUTPUT_SELECTION__) == LL_COMP_OUTPUT_TIM3_OCCLR)                    \

-  )

-

-#define IS_LL_COMP_OUTPUT_POLARITY(__POLARITY__)                               \

-  (   ((__POLARITY__) == LL_COMP_OUTPUTPOL_NONINVERTED)                        \

-   || ((__POLARITY__) == LL_COMP_OUTPUTPOL_INVERTED)                           \

-  )

-

-/**

-  * @}

-  */

-

-

-/* Private function prototypes -----------------------------------------------*/

-

-/* Exported functions --------------------------------------------------------*/

-/** @addtogroup COMP_LL_Exported_Functions

-  * @{

-  */

-

-/** @addtogroup COMP_LL_EF_Init

-  * @{

-  */

-

-/**

-  * @brief  De-initialize registers of the selected COMP instance

-  *         to their default reset values.

-  * @note   If comparator is locked, de-initialization by software is

-  *         not possible.

-  *         The only way to unlock the comparator is a device hardware reset.

-  * @param  COMPx COMP instance

-  * @retval An ErrorStatus enumeration value:

-  *          - SUCCESS: COMP registers are de-initialized

-  *          - ERROR: COMP registers are not de-initialized

-  */

-ErrorStatus LL_COMP_DeInit(COMP_TypeDef *COMPx)

-{

-  ErrorStatus status = SUCCESS;

-  

-  /* Check the parameters */

-  assert_param(IS_COMP_ALL_INSTANCE(COMPx));

-  

-  /* Note: Hardware constraint (refer to description of this function):       */

-  /*       COMP instance must not be locked.                                  */

-  if(LL_COMP_IsLocked(COMPx) == 0U)

-  {

-    /* Note: Connection switch is applicable only to COMP instance COMP1,     */

-    /*       therefore is COMP2 is selected the equivalent bit is             */

-    /*       kept unmodified.                                                 */

-    if(COMPx == COMP1)

-    {

-      CLEAR_BIT(COMP->CSR,

-                (  COMP_CSR_COMP1MODE

-                 | COMP_CSR_COMP1INSEL

-                 | COMP_CSR_COMP1SW1

-                 | COMP_CSR_COMP1OUTSEL

-                 | COMP_CSR_COMP1HYST

-                 | COMP_CSR_COMP1POL

-                 | COMP_CSR_COMP1EN

-                ) << __COMP_BITOFFSET_INSTANCE(COMPx)

-               );

-    }

-    else

-    {

-      CLEAR_BIT(COMP->CSR,

-                (  COMP_CSR_COMP1MODE

-                 | COMP_CSR_COMP1INSEL

-                 | COMP_CSR_COMP1OUTSEL

-                 | COMP_CSR_COMP1HYST

-                 | COMP_CSR_COMP1POL

-                 | COMP_CSR_COMP1EN

-                ) << __COMP_BITOFFSET_INSTANCE(COMPx)

-               );

-    }

-    

-  }

-  else

-  {

-    /* Comparator instance is locked: de-initialization by software is         */

-    /* not possible.                                                           */

-    /* The only way to unlock the comparator is a device hardware reset.       */

-    status = ERROR;

-  }

-  

-  return status;

-}

-

-/**

-  * @brief  Initialize some features of COMP instance.

-  * @note   This function configures features of the selected COMP instance.

-  *         Some features are also available at scope COMP common instance

-  *         (common to several COMP instances).

-  *         Refer to functions having argument "COMPxy_COMMON" as parameter.

-  * @param  COMPx COMP instance

-  * @param  COMP_InitStruct Pointer to a @ref LL_COMP_InitTypeDef structure

-  * @retval An ErrorStatus enumeration value:

-  *          - SUCCESS: COMP registers are initialized

-  *          - ERROR: COMP registers are not initialized

-  */

-ErrorStatus LL_COMP_Init(COMP_TypeDef *COMPx, LL_COMP_InitTypeDef *COMP_InitStruct)

-{

-  ErrorStatus status = SUCCESS;

-  

-  /* Check the parameters */

-  assert_param(IS_COMP_ALL_INSTANCE(COMPx));

-  assert_param(IS_LL_COMP_POWER_MODE(COMP_InitStruct->PowerMode));

-  assert_param(IS_LL_COMP_INPUT_PLUS(COMPx, COMP_InitStruct->InputPlus));

-  assert_param(IS_LL_COMP_INPUT_MINUS(COMPx, COMP_InitStruct->InputMinus));

-  assert_param(IS_LL_COMP_INPUT_HYSTERESIS(COMP_InitStruct->InputHysteresis));

-  assert_param(IS_LL_COMP_OUTPUT_SELECTION(COMP_InitStruct->OutputSelection));

-  assert_param(IS_LL_COMP_OUTPUT_POLARITY(COMP_InitStruct->OutputPolarity));

-  

-  /* Note: Hardware constraint (refer to description of this function)        */

-  /*       COMP instance must not be locked.                                  */

-  if(LL_COMP_IsLocked(COMPx) == 0U)

-  {

-    /* Configuration of comparator instance :                                 */

-    /*  - PowerMode                                                           */

-    /*  - InputPlus                                                           */

-    /*  - InputMinus                                                          */

-    /*  - InputHysteresis                                                     */

-    /*  - OutputSelection                                                     */

-    /*  - OutputPolarity                                                      */

-    /* Note: Connection switch is applicable only to COMP instance COMP1,     */

-    /*       therefore is COMP2 is selected the equivalent bit is             */

-    /*       kept unmodified.                                                 */

-    if(COMPx == COMP1)

-    {

-      MODIFY_REG(COMP->CSR,

-                 (  COMP_CSR_COMP1MODE

-                  | COMP_CSR_COMP1INSEL

-                  | COMP_CSR_COMP1SW1

-                  | COMP_CSR_COMP1OUTSEL

-                  | COMP_CSR_COMP1HYST

-                  | COMP_CSR_COMP1POL

-                 ) << __COMP_BITOFFSET_INSTANCE(COMPx)

-                ,

-                 (  COMP_InitStruct->PowerMode

-                  | COMP_InitStruct->InputPlus

-                  | COMP_InitStruct->InputMinus

-                  | COMP_InitStruct->InputHysteresis

-                  | COMP_InitStruct->OutputSelection

-                  | COMP_InitStruct->OutputPolarity

-                 ) << __COMP_BITOFFSET_INSTANCE(COMPx)

-                );

-    }

-    else

-    {

-      MODIFY_REG(COMP->CSR,

-                 (  COMP_CSR_COMP1MODE

-                  | COMP_CSR_COMP1INSEL

-                  | COMP_CSR_COMP1OUTSEL

-                  | COMP_CSR_COMP1HYST

-                  | COMP_CSR_COMP1POL

-                 ) << __COMP_BITOFFSET_INSTANCE(COMPx)

-                ,

-                 (  COMP_InitStruct->PowerMode

-                  | COMP_InitStruct->InputPlus

-                  | COMP_InitStruct->InputMinus

-                  | COMP_InitStruct->InputHysteresis

-                  | COMP_InitStruct->OutputSelection

-                  | COMP_InitStruct->OutputPolarity

-                 ) << __COMP_BITOFFSET_INSTANCE(COMPx)

-                );

-    }

-    

-  }

-  else

-  {

-    /* Initialization error: COMP instance is locked.                         */

-    status = ERROR;

-  }

-  

-  return status;

-}

-

-/**

-  * @brief Set each @ref LL_COMP_InitTypeDef field to default value.

-  * @param COMP_InitStruct pointer to a @ref LL_COMP_InitTypeDef structure

-  *                         whose fields will be set to default values.

-  * @retval None

-  */

-void LL_COMP_StructInit(LL_COMP_InitTypeDef *COMP_InitStruct)

-{

-  /* Set COMP_InitStruct fields to default values */

-  COMP_InitStruct->PowerMode            = LL_COMP_POWERMODE_ULTRALOWPOWER;

-  COMP_InitStruct->InputPlus            = LL_COMP_INPUT_PLUS_IO1;

-  COMP_InitStruct->InputMinus           = LL_COMP_INPUT_MINUS_VREFINT;

-  COMP_InitStruct->InputHysteresis      = LL_COMP_HYSTERESIS_NONE;

-  COMP_InitStruct->OutputSelection      = LL_COMP_OUTPUT_NONE;

-  COMP_InitStruct->OutputPolarity       = LL_COMP_OUTPUTPOL_NONINVERTED;

-}

-

-/**

-  * @}

-  */

-

-/**

-  * @}

-  */

-

-/**

-  * @}

-  */

-

-#endif /* COMP1 || COMP2 */

-

-/**

-  * @}

-  */

-

-#endif /* USE_FULL_LL_DRIVER */

-

-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/