minkbd: repo restructure

1 files changed, 0 insertions, 333 deletions

diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.c b/Blink/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.c
deleted file mode 100644
index 9dd3af2..0000000
--- a/Blink/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_i2c_ex.c
+++ /dev/null
@@ -1,333 +0,0 @@
-/**

-  ******************************************************************************

-  * @file    stm32f0xx_hal_i2c_ex.c

-  * @author  MCD Application Team

-  * @brief   I2C Extended HAL module driver.

-  *          This file provides firmware functions to manage the following

-  *          functionalities of I2C Extended peripheral:

-  *           + Extended features functions

-  *

-  @verbatim

-  ==============================================================================

-               ##### I2C peripheral Extended features  #####

-  ==============================================================================

-

-  [..] Comparing to other previous devices, the I2C interface for STM32F0xx

-       devices contains the following additional features

-

-       (+) Possibility to disable or enable Analog Noise Filter

-       (+) Use of a configured Digital Noise Filter

-       (+) Disable or enable wakeup from Stop mode(s)

-       (+) Disable or enable Fast Mode Plus

-

-                     ##### How to use this driver #####

-  ==============================================================================

-  [..] This driver provides functions to configure Noise Filter and Wake Up Feature

-    (#) Configure I2C Analog noise filter using the function HAL_I2CEx_ConfigAnalogFilter()

-    (#) Configure I2C Digital noise filter using the function HAL_I2CEx_ConfigDigitalFilter()

-    (#) Configure the enable or disable of I2C Wake Up Mode using the functions :

-          (++) HAL_I2CEx_EnableWakeUp()

-          (++) HAL_I2CEx_DisableWakeUp()

-    (#) Configure the enable or disable of fast mode plus driving capability using the functions :

-          (++) HAL_I2CEx_EnableFastModePlus()

-          (++) HAL_I2CEx_DisableFastModePlus()

-  @endverbatim

-  ******************************************************************************

-  * @attention

-  *

-  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.

-  * All rights reserved.</center></h2>

-  *

-  * This software component is licensed by ST under BSD 3-Clause license,

-  * the "License"; You may not use this file except in compliance with the

-  * License. You may obtain a copy of the License at:

-  *                        opensource.org/licenses/BSD-3-Clause

-  *

-  ******************************************************************************

-  */

-

-/* Includes ------------------------------------------------------------------*/

-#include "stm32f0xx_hal.h"

-

-/** @addtogroup STM32F0xx_HAL_Driver

-  * @{

-  */

-

-/** @defgroup I2CEx I2CEx

-  * @brief I2C Extended HAL module driver

-  * @{

-  */

-

-#ifdef HAL_I2C_MODULE_ENABLED

-

-/* Private typedef -----------------------------------------------------------*/

-/* Private define ------------------------------------------------------------*/

-/* Private macro -------------------------------------------------------------*/

-/* Private variables ---------------------------------------------------------*/

-/* Private function prototypes -----------------------------------------------*/

-/* Private functions ---------------------------------------------------------*/

-

-/** @defgroup I2CEx_Exported_Functions I2C Extended Exported Functions

-  * @{

-  */

-

-/** @defgroup I2CEx_Exported_Functions_Group1 Extended features functions

-  * @brief    Extended features functions

- *

-@verbatim

- ===============================================================================

-                      ##### Extended features functions #####

- ===============================================================================

-    [..] This section provides functions allowing to:

-      (+) Configure Noise Filters

-      (+) Configure Wake Up Feature

-      (+) Configure Fast Mode Plus

-

-@endverbatim

-  * @{

-  */

-

-/**

-  * @brief  Configure I2C Analog noise filter.

-  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains

-  *                the configuration information for the specified I2Cx peripheral.

-  * @param  AnalogFilter New state of the Analog filter.

-  * @retval HAL status

-  */

-HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter)

-{

-  /* Check the parameters */

-  assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));

-  assert_param(IS_I2C_ANALOG_FILTER(AnalogFilter));

-

-  if (hi2c->State == HAL_I2C_STATE_READY)

-  {

-    /* Process Locked */

-    __HAL_LOCK(hi2c);

-

-    hi2c->State = HAL_I2C_STATE_BUSY;

-

-    /* Disable the selected I2C peripheral */

-    __HAL_I2C_DISABLE(hi2c);

-

-    /* Reset I2Cx ANOFF bit */

-    hi2c->Instance->CR1 &= ~(I2C_CR1_ANFOFF);

-

-    /* Set analog filter bit*/

-    hi2c->Instance->CR1 |= AnalogFilter;

-

-    __HAL_I2C_ENABLE(hi2c);

-

-    hi2c->State = HAL_I2C_STATE_READY;

-

-    /* Process Unlocked */

-    __HAL_UNLOCK(hi2c);

-

-    return HAL_OK;

-  }

-  else

-  {

-    return HAL_BUSY;

-  }

-}

-

-/**

-  * @brief  Configure I2C Digital noise filter.

-  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains

-  *                the configuration information for the specified I2Cx peripheral.

-  * @param  DigitalFilter Coefficient of digital noise filter between Min_Data=0x00 and Max_Data=0x0F.

-  * @retval HAL status

-  */

-HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter)

-{

-  uint32_t tmpreg;

-

-  /* Check the parameters */

-  assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));

-  assert_param(IS_I2C_DIGITAL_FILTER(DigitalFilter));

-

-  if (hi2c->State == HAL_I2C_STATE_READY)

-  {

-    /* Process Locked */

-    __HAL_LOCK(hi2c);

-

-    hi2c->State = HAL_I2C_STATE_BUSY;

-

-    /* Disable the selected I2C peripheral */

-    __HAL_I2C_DISABLE(hi2c);

-

-    /* Get the old register value */

-    tmpreg = hi2c->Instance->CR1;

-

-    /* Reset I2Cx DNF bits [11:8] */

-    tmpreg &= ~(I2C_CR1_DNF);

-

-    /* Set I2Cx DNF coefficient */

-    tmpreg |= DigitalFilter << 8U;

-

-    /* Store the new register value */

-    hi2c->Instance->CR1 = tmpreg;

-

-    __HAL_I2C_ENABLE(hi2c);

-

-    hi2c->State = HAL_I2C_STATE_READY;

-

-    /* Process Unlocked */

-    __HAL_UNLOCK(hi2c);

-

-    return HAL_OK;

-  }

-  else

-  {

-    return HAL_BUSY;

-  }

-}

-#if defined(I2C_CR1_WUPEN)

-

-/**

-  * @brief  Enable I2C wakeup from Stop mode(s).

-  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains

-  *                the configuration information for the specified I2Cx peripheral.

-  * @retval HAL status

-  */

-HAL_StatusTypeDef HAL_I2CEx_EnableWakeUp(I2C_HandleTypeDef *hi2c)

-{

-  /* Check the parameters */

-  assert_param(IS_I2C_WAKEUP_FROMSTOP_INSTANCE(hi2c->Instance));

-

-  if (hi2c->State == HAL_I2C_STATE_READY)

-  {

-    /* Process Locked */

-    __HAL_LOCK(hi2c);

-

-    hi2c->State = HAL_I2C_STATE_BUSY;

-

-    /* Disable the selected I2C peripheral */

-    __HAL_I2C_DISABLE(hi2c);

-

-    /* Enable wakeup from stop mode */

-    hi2c->Instance->CR1 |= I2C_CR1_WUPEN;

-

-    __HAL_I2C_ENABLE(hi2c);

-

-    hi2c->State = HAL_I2C_STATE_READY;

-

-    /* Process Unlocked */

-    __HAL_UNLOCK(hi2c);

-

-    return HAL_OK;

-  }

-  else

-  {

-    return HAL_BUSY;

-  }

-}

-

-/**

-  * @brief  Disable I2C wakeup from Stop mode(s).

-  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains

-  *                the configuration information for the specified I2Cx peripheral.

-  * @retval HAL status

-  */

-HAL_StatusTypeDef HAL_I2CEx_DisableWakeUp(I2C_HandleTypeDef *hi2c)

-{

-  /* Check the parameters */

-  assert_param(IS_I2C_WAKEUP_FROMSTOP_INSTANCE(hi2c->Instance));

-

-  if (hi2c->State == HAL_I2C_STATE_READY)

-  {

-    /* Process Locked */

-    __HAL_LOCK(hi2c);

-

-    hi2c->State = HAL_I2C_STATE_BUSY;

-

-    /* Disable the selected I2C peripheral */

-    __HAL_I2C_DISABLE(hi2c);

-

-    /* Enable wakeup from stop mode */

-    hi2c->Instance->CR1 &= ~(I2C_CR1_WUPEN);

-

-    __HAL_I2C_ENABLE(hi2c);

-

-    hi2c->State = HAL_I2C_STATE_READY;

-

-    /* Process Unlocked */

-    __HAL_UNLOCK(hi2c);

-

-    return HAL_OK;

-  }

-  else

-  {

-    return HAL_BUSY;

-  }

-}

-#endif

-

-/**

-  * @brief Enable the I2C fast mode plus driving capability.

-  * @param ConfigFastModePlus Selects the pin.

-  *   This parameter can be one of the @ref I2CEx_FastModePlus values

-  * @note  For I2C1, fast mode plus driving capability can be enabled on all selected

-  *        I2C1 pins using I2C_FASTMODEPLUS_I2C1 parameter or independently

-  *        on each one of the following pins PB6, PB7, PB8 and PB9.

-  * @note  For remaining I2C1 pins (PA14, PA15...) fast mode plus driving capability

-  *        can be enabled only by using I2C_FASTMODEPLUS_I2C1 parameter.

-  * @note  For all I2C2 pins fast mode plus driving capability can be enabled

-  *        only by using I2C_FASTMODEPLUS_I2C2 parameter.

-  * @retval None

-  */

-void HAL_I2CEx_EnableFastModePlus(uint32_t ConfigFastModePlus)

-{

-  /* Check the parameter */

-  assert_param(IS_I2C_FASTMODEPLUS(ConfigFastModePlus));

-

-  /* Enable SYSCFG clock */

-  __HAL_RCC_SYSCFG_CLK_ENABLE();

-

-  /* Enable fast mode plus driving capability for selected pin */

-  SET_BIT(SYSCFG->CFGR1, (uint32_t)ConfigFastModePlus);

-}

-

-/**

-  * @brief Disable the I2C fast mode plus driving capability.

-  * @param ConfigFastModePlus Selects the pin.

-  *   This parameter can be one of the @ref I2CEx_FastModePlus values

-  * @note  For I2C1, fast mode plus driving capability can be disabled on all selected

-  *        I2C1 pins using I2C_FASTMODEPLUS_I2C1 parameter or independently

-  *        on each one of the following pins PB6, PB7, PB8 and PB9.

-  * @note  For remaining I2C1 pins (PA14, PA15...) fast mode plus driving capability

-  *        can be disabled only by using I2C_FASTMODEPLUS_I2C1 parameter.

-  * @note  For all I2C2 pins fast mode plus driving capability can be disabled

-  *        only by using I2C_FASTMODEPLUS_I2C2 parameter.

-  * @retval None

-  */

-void HAL_I2CEx_DisableFastModePlus(uint32_t ConfigFastModePlus)

-{

-  /* Check the parameter */

-  assert_param(IS_I2C_FASTMODEPLUS(ConfigFastModePlus));

-

-  /* Enable SYSCFG clock */

-  __HAL_RCC_SYSCFG_CLK_ENABLE();

-

-  /* Disable fast mode plus driving capability for selected pin */

-  CLEAR_BIT(SYSCFG->CFGR1, (uint32_t)ConfigFastModePlus);

-}

-

-/**

-  * @}

-  */

-

-/**

-  * @}

-  */

-

-#endif /* HAL_I2C_MODULE_ENABLED */

-/**

-  * @}

-  */

-

-/**

-  * @}

-  */

-

-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/