minkbd: repo restructure

1 files changed, 0 insertions, 237 deletions

diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_usb.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_usb.h
deleted file mode 100644
index 4197cb6..0000000
--- a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_usb.h
+++ /dev/null
@@ -1,237 +0,0 @@
-/**

-  ******************************************************************************

-  * @file    stm32f0xx_ll_usb.h

-  * @author  MCD Application Team

-  * @brief   Header file of USB Low Layer HAL module.

-  ******************************************************************************

-  * @attention

-  *

-  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.

-  * All rights reserved.</center></h2>

-  *

-  * This software component is licensed by ST under BSD 3-Clause license,

-  * the "License"; You may not use this file except in compliance with the

-  * License. You may obtain a copy of the License at:

-  *                        opensource.org/licenses/BSD-3-Clause

-  *

-  ******************************************************************************

-  */

-

-/* Define to prevent recursive inclusion -------------------------------------*/

-#ifndef STM32F0xx_LL_USB_H

-#define STM32F0xx_LL_USB_H

-

-#ifdef __cplusplus

-extern "C" {

-#endif

-

-/* Includes ------------------------------------------------------------------*/

-#include "stm32f0xx_hal_def.h"

-

-#if defined (USB)

-/** @addtogroup STM32F0xx_HAL_Driver

-  * @{

-  */

-

-/** @addtogroup USB_LL

-  * @{

-  */

-

-/* Exported types ------------------------------------------------------------*/

-

-/**

-  * @brief  USB Mode definition

-  */

-

-

-

-typedef enum

-{

-  USB_DEVICE_MODE  = 0

-} USB_ModeTypeDef;

-

-/**

-  * @brief  USB Initialization Structure definition

-  */

-typedef struct

-{

-  uint32_t dev_endpoints;           /*!< Device Endpoints number.

-                                         This parameter depends on the used USB core.

-                                         This parameter must be a number between Min_Data = 1 and Max_Data = 15 */

-

-  uint32_t speed;                   /*!< USB Core speed.

-                                         This parameter can be any value of @ref USB_Core_Speed                 */

-

-  uint32_t ep0_mps;                 /*!< Set the Endpoint 0 Max Packet size.                                    */

-

-  uint32_t phy_itface;              /*!< Select the used PHY interface.

-                                         This parameter can be any value of @ref USB_Core_PHY                   */

-

-  uint32_t Sof_enable;              /*!< Enable or disable the output of the SOF signal.                        */

-

-  uint32_t low_power_enable;        /*!< Enable or disable Low Power mode                                       */

-

-  uint32_t lpm_enable;              /*!< Enable or disable Battery charging.                                    */

-

-  uint32_t battery_charging_enable; /*!< Enable or disable Battery charging.                                    */

-} USB_CfgTypeDef;

-

-typedef struct

-{

-  uint8_t   num;             /*!< Endpoint number

-                                  This parameter must be a number between Min_Data = 1 and Max_Data = 15    */

-

-  uint8_t   is_in;           /*!< Endpoint direction

-                                  This parameter must be a number between Min_Data = 0 and Max_Data = 1     */

-

-  uint8_t   is_stall;        /*!< Endpoint stall condition

-                                  This parameter must be a number between Min_Data = 0 and Max_Data = 1     */

-

-  uint8_t   type;            /*!< Endpoint type

-                                  This parameter can be any value of @ref USB_EP_Type                       */

-

-  uint8_t   data_pid_start;  /*!< Initial data PID

-                                  This parameter must be a number between Min_Data = 0 and Max_Data = 1     */

-

-  uint16_t  pmaadress;       /*!< PMA Address

-                                  This parameter can be any value between Min_addr = 0 and Max_addr = 1K    */

-

-  uint16_t  pmaaddr0;        /*!< PMA Address0

-                                  This parameter can be any value between Min_addr = 0 and Max_addr = 1K    */

-

-  uint16_t  pmaaddr1;        /*!< PMA Address1

-                                  This parameter can be any value between Min_addr = 0 and Max_addr = 1K    */

-

-  uint8_t   doublebuffer;    /*!< Double buffer enable

-                                  This parameter can be 0 or 1                                              */

-

-  uint16_t  tx_fifo_num;     /*!< This parameter is not required by USB Device FS peripheral, it is used

-                                  only by USB OTG FS peripheral

-                                  This parameter is added to ensure compatibility across USB peripherals    */

-

-  uint32_t  maxpacket;       /*!< Endpoint Max packet size

-                                  This parameter must be a number between Min_Data = 0 and Max_Data = 64KB  */

-

-  uint8_t   *xfer_buff;      /*!< Pointer to transfer buffer                                                */

-

-  uint32_t  xfer_len;        /*!< Current transfer length                                                   */

-

-  uint32_t  xfer_count;      /*!< Partial transfer length in case of multi packet transfer                  */

-

-} USB_EPTypeDef;

-

-

-/* Exported constants --------------------------------------------------------*/

-

-/** @defgroup PCD_Exported_Constants PCD Exported Constants

-  * @{

-  */

-

-

-/** @defgroup USB_LL_EP0_MPS USB Low Layer EP0 MPS

-  * @{

-  */

-#define DEP0CTL_MPS_64                         0U

-#define DEP0CTL_MPS_32                         1U

-#define DEP0CTL_MPS_16                         2U

-#define DEP0CTL_MPS_8                          3U

-/**

-  * @}

-  */

-

-/** @defgroup USB_LL_EP_Type USB Low Layer EP Type

-  * @{

-  */

-#define EP_TYPE_CTRL                           0U

-#define EP_TYPE_ISOC                           1U

-#define EP_TYPE_BULK                           2U

-#define EP_TYPE_INTR                           3U

-#define EP_TYPE_MSK                            3U

-/**

-  * @}

-  */

-

-/** @defgroup USB_LL Device Speed

-  * @{

-  */

-#define USBD_FS_SPEED                          2U

-/**

-  * @}

-  */

-

-#define BTABLE_ADDRESS                         0x000U

-#define PMA_ACCESS                             1U

-

-#define EP_ADDR_MSK                            0x7U

-/**

-  * @}

-  */

-

-/* Exported macro ------------------------------------------------------------*/

-/**

-  * @}

-  */

-

-/* Exported functions --------------------------------------------------------*/

-/** @addtogroup USB_LL_Exported_Functions USB Low Layer Exported Functions

-  * @{

-  */

-

-

-HAL_StatusTypeDef USB_CoreInit(USB_TypeDef *USBx, USB_CfgTypeDef cfg);

-HAL_StatusTypeDef USB_DevInit(USB_TypeDef *USBx, USB_CfgTypeDef cfg);

-HAL_StatusTypeDef USB_EnableGlobalInt(USB_TypeDef *USBx);

-HAL_StatusTypeDef USB_DisableGlobalInt(USB_TypeDef *USBx);

-HAL_StatusTypeDef USB_SetCurrentMode(USB_TypeDef *USBx, USB_ModeTypeDef mode);

-HAL_StatusTypeDef USB_SetDevSpeed(USB_TypeDef *USBx, uint8_t speed);

-HAL_StatusTypeDef USB_FlushRxFifo(USB_TypeDef *USBx);

-HAL_StatusTypeDef USB_FlushTxFifo(USB_TypeDef *USBx, uint32_t num);

-HAL_StatusTypeDef USB_ActivateEndpoint(USB_TypeDef *USBx, USB_EPTypeDef *ep);

-HAL_StatusTypeDef USB_DeactivateEndpoint(USB_TypeDef *USBx, USB_EPTypeDef *ep);

-HAL_StatusTypeDef USB_EPStartXfer(USB_TypeDef *USBx, USB_EPTypeDef *ep);

-HAL_StatusTypeDef USB_WritePacket(USB_TypeDef *USBx, uint8_t *src, uint8_t ch_ep_num, uint16_t len);

-void             *USB_ReadPacket(USB_TypeDef *USBx, uint8_t *dest, uint16_t len);

-HAL_StatusTypeDef USB_EPSetStall(USB_TypeDef *USBx, USB_EPTypeDef *ep);

-HAL_StatusTypeDef USB_EPClearStall(USB_TypeDef *USBx, USB_EPTypeDef *ep);

-HAL_StatusTypeDef USB_SetDevAddress(USB_TypeDef *USBx, uint8_t address);

-HAL_StatusTypeDef USB_DevConnect(USB_TypeDef *USBx);

-HAL_StatusTypeDef USB_DevDisconnect(USB_TypeDef *USBx);

-HAL_StatusTypeDef USB_StopDevice(USB_TypeDef *USBx);

-HAL_StatusTypeDef USB_EP0_OutStart(USB_TypeDef *USBx, uint8_t *psetup);

-uint32_t          USB_ReadInterrupts(USB_TypeDef *USBx);

-uint32_t          USB_ReadDevAllOutEpInterrupt(USB_TypeDef *USBx);

-uint32_t          USB_ReadDevOutEPInterrupt(USB_TypeDef *USBx, uint8_t epnum);

-uint32_t          USB_ReadDevAllInEpInterrupt(USB_TypeDef *USBx);

-uint32_t          USB_ReadDevInEPInterrupt(USB_TypeDef *USBx, uint8_t epnum);

-void              USB_ClearInterrupts(USB_TypeDef *USBx, uint32_t interrupt);

-

-HAL_StatusTypeDef USB_ActivateRemoteWakeup(USB_TypeDef *USBx);

-HAL_StatusTypeDef USB_DeActivateRemoteWakeup(USB_TypeDef *USBx);

-void USB_WritePMA(USB_TypeDef  *USBx, uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes);

-void USB_ReadPMA(USB_TypeDef  *USBx, uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes);

-

-/**

-  * @}

-  */

-

-/**

-  * @}

-  */

-

-/**

-  * @}

-  */

-

-/**

-  * @}

-  */

-#endif /* defined (USB) */

-

-#ifdef __cplusplus

-}

-#endif

-

-

-#endif /* STM32F0xx_LL_USB_H */

-

-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/