minkbd: repo restructure

1 files changed, 0 insertions, 831 deletions

diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_comp.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_comp.h
deleted file mode 100644
index 1dcde86..0000000
--- a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_comp.h
+++ /dev/null
@@ -1,831 +0,0 @@
-/**

-  ******************************************************************************

-  * @file    stm32f0xx_ll_comp.h

-  * @author  MCD Application Team

-  * @brief   Header file of COMP LL module.

-  ******************************************************************************

-  * @attention

-  *

-  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.

-  * All rights reserved.</center></h2>

-  *

-  * This software component is licensed by ST under BSD 3-Clause license,

-  * the "License"; You may not use this file except in compliance with the

-  * License. You may obtain a copy of the License at:

-  *                        opensource.org/licenses/BSD-3-Clause

-  *

-  ******************************************************************************

-  */

-

-/* Define to prevent recursive inclusion -------------------------------------*/

-#ifndef __STM32F0xx_LL_COMP_H

-#define __STM32F0xx_LL_COMP_H

-

-#ifdef __cplusplus

-extern "C" {

-#endif

-

-/* Includes ------------------------------------------------------------------*/

-#include "stm32f0xx.h"

-

-/** @addtogroup STM32F0xx_LL_Driver

-  * @{

-  */

-

-#if defined (COMP1) || defined (COMP2)

-

-/** @defgroup COMP_LL COMP

-  * @{

-  */

-

-/* Private types -------------------------------------------------------------*/

-/* Private variables ---------------------------------------------------------*/

-/* Private constants ---------------------------------------------------------*/

-/** @defgroup COMP_LL_Private_Constants COMP Private Constants

-  * @{

-  */

-

-/* Differentiation between COMP instances */

-/* Note: Value not corresponding to a register offset since both              */

-/*       COMP instances are sharing the same register) .                      */

-#define COMPX_BASE  COMP_BASE

-#define COMPX       (COMP1 - COMP2)

-

-/* COMP registers bits positions */

-#define LL_COMP_OUTPUT_LEVEL_BITOFFSET_POS ((uint32_t)14U) /* Value equivalent to POSITION_VAL(COMP_CSR_COMP1OUT) */

-

-/**

-  * @}

-  */

-

-/* Private macros ------------------------------------------------------------*/

-/** @defgroup COMP_LL_Private_Macros COMP Private Macros

-  * @{

-  */

-

-/**

-  * @brief  Driver macro reserved for internal use: if COMP instance selected

-  *         is odd (COMP1, COMP3, ...), return value '1', else return '0'.

-  * @param  __COMP_INSTANCE__ COMP instance

-  * @retval If COMP instance is odd, value '1'. Else, value '0'.

-*/

-#define __COMP_IS_INSTANCE_ODD(__COMP_INSTANCE__)                              \

-  ((~(((uint32_t)(__COMP_INSTANCE__) - COMP_BASE) >> 1U)) & 0x00000001)

-

-/**

-  * @brief  Driver macro reserved for internal use: if COMP instance selected

-  *         is even (COMP2, COMP4, ...), return value '1', else return '0'.

-  * @param  __COMP_INSTANCE__ COMP instance

-  * @retval If COMP instance is even, value '1'. Else, value '0'.

-*/

-#define __COMP_IS_INSTANCE_EVEN(__COMP_INSTANCE__)                             \

-  (((uint32_t)(__COMP_INSTANCE__) - COMP_BASE) >> 1U)

-

-/**

-  * @brief  Driver macro reserved for internal use: from COMP instance

-  *         selected, set offset of bits into COMP register.

-  * @note   Since both COMP instances are sharing the same register

-  *         with 2 area of bits with an offset of 16 bits, this function

-  *         returns value "0" if COMP1 is selected and "16" if COMP2 is

-  *         selected.

-  * @param  __COMP_INSTANCE__ COMP instance

-  * @retval Bits offset in register 32 bits

-*/

-#define __COMP_BITOFFSET_INSTANCE(__COMP_INSTANCE__)                           \

-  (((uint32_t)(__COMP_INSTANCE__) - COMP_BASE) << 3U)

-

-/**

-  * @}

-  */

-

-/* Exported types ------------------------------------------------------------*/

-#if defined(USE_FULL_LL_DRIVER)

-/** @defgroup COMP_LL_ES_INIT COMP Exported Init structure

-  * @{

-  */

-

-/**

-  * @brief  Structure definition of some features of COMP instance.

-  */

-typedef struct

-{

-  uint32_t PowerMode;                   /*!< Set comparator operating mode to adjust power and speed.

-                                             This parameter can be a value of @ref COMP_LL_EC_POWERMODE

-                                             

-                                             This feature can be modified afterwards using unitary function @ref LL_COMP_SetPowerMode(). */

-

-  uint32_t InputPlus;                   /*!< Set comparator input plus (non-inverting input).

-                                             This parameter can be a value of @ref COMP_LL_EC_INPUT_PLUS

-                                             

-                                             This feature can be modified afterwards using unitary function @ref LL_COMP_SetInputPlus(). */

-

-  uint32_t InputMinus;                  /*!< Set comparator input minus (inverting input).

-                                             This parameter can be a value of @ref COMP_LL_EC_INPUT_MINUS

-                                             

-                                             This feature can be modified afterwards using unitary function @ref LL_COMP_SetInputMinus(). */

-

-  uint32_t InputHysteresis;             /*!< Set comparator hysteresis mode of the input minus.

-                                             This parameter can be a value of @ref COMP_LL_EC_INPUT_HYSTERESIS

-                                             

-                                             This feature can be modified afterwards using unitary function @ref LL_COMP_SetInputHysteresis(). */

-

-  uint32_t OutputSelection;             /*!< Set comparator output selection.

-                                             This parameter can be a value of @ref COMP_LL_EC_OUTPUT_SELECTION

-                                             

-                                             This feature can be modified afterwards using unitary function @ref LL_COMP_SetOutputSelection(). */

-

-  uint32_t OutputPolarity;              /*!< Set comparator output polarity.

-                                             This parameter can be a value of @ref COMP_LL_EC_OUTPUT_POLARITY

-                                             

-                                             This feature can be modified afterwards using unitary function @ref LL_COMP_SetOutputPolarity(). */

-

-} LL_COMP_InitTypeDef;

-

-/**

-  * @}

-  */

-#endif /* USE_FULL_LL_DRIVER */

-

-/* Exported constants --------------------------------------------------------*/

-/** @defgroup COMP_LL_Exported_Constants COMP Exported Constants

-  * @{

-  */

-

-/** @defgroup COMP_LL_EC_COMMON_WINDOWMODE Comparator common modes - Window mode

-  * @{

-  */

-#define LL_COMP_WINDOWMODE_DISABLE                 ((uint32_t)0x00000000U) /*!< Window mode disable: Comparators 1 and 2 are independent */

-#define LL_COMP_WINDOWMODE_COMP1_INPUT_PLUS_COMMON (COMP_CSR_WNDWEN)       /*!< Window mode enable: Comparators instances pair COMP1 and COMP2 have their input plus connected together. The common input is COMP1 input plus (COMP2 input plus is no more accessible). */

-/**

-  * @}

-  */

-

-/** @defgroup COMP_LL_EC_POWERMODE Comparator modes - Power mode

-  * @{

-  */

-#define LL_COMP_POWERMODE_HIGHSPEED     ((uint32_t)0x00000000U)                       /*!< COMP power mode to high speed */

-#define LL_COMP_POWERMODE_MEDIUMSPEED   (COMP_CSR_COMP1MODE_0)                        /*!< COMP power mode to medium speed */

-#define LL_COMP_POWERMODE_LOWPOWER      (COMP_CSR_COMP1MODE_1)                        /*!< COMP power mode to low power */

-#define LL_COMP_POWERMODE_ULTRALOWPOWER (COMP_CSR_COMP1MODE_1 | COMP_CSR_COMP1MODE_0) /*!< COMP power mode to ultra-low power */

-/**

-  * @}

-  */

-

-/** @defgroup COMP_LL_EC_INPUT_PLUS Comparator inputs - Input plus (input non-inverting) selection

-  * @{

-  */

-#define LL_COMP_INPUT_PLUS_IO1          ((uint32_t)0x00000000U) /*!< Comparator input plus connected to IO1 (pin PA1 for COMP1, pin PA3 for COMP2) */

-#define LL_COMP_INPUT_PLUS_DAC1_CH1     (COMP_CSR_COMP1SW1)     /*!< Comparator input plus connected to DAC1 channel 1 (DAC_OUT1), through dedicated switch (Note: this switch is solely intended to redirect signals onto high impedance input, such as COMP1 input plus (highly resistive switch)) (specific to COMP instance: COMP1) */

-/**

-  * @}

-  */

-

-/** @defgroup COMP_LL_EC_INPUT_MINUS Comparator inputs - Input minus (input inverting) selection

-  * @{

-  */

-#define LL_COMP_INPUT_MINUS_1_4VREFINT  ((uint32_t)0x00000000U)                                                 /*!< Comparator input minus connected to 1/4 VrefInt  */

-#define LL_COMP_INPUT_MINUS_1_2VREFINT  (                                                COMP_CSR_COMP1INSEL_0) /*!< Comparator input minus connected to 1/2 VrefInt  */

-#define LL_COMP_INPUT_MINUS_3_4VREFINT  (                        COMP_CSR_COMP1INSEL_1                        ) /*!< Comparator input minus connected to 3/4 VrefInt  */

-#define LL_COMP_INPUT_MINUS_VREFINT     (                        COMP_CSR_COMP1INSEL_1 | COMP_CSR_COMP1INSEL_0) /*!< Comparator input minus connected to VrefInt */

-#define LL_COMP_INPUT_MINUS_DAC1_CH1    (COMP_CSR_COMP1INSEL_2                                                ) /*!< Comparator input minus connected to DAC1 channel 1 (DAC_OUT1)  */

-#define LL_COMP_INPUT_MINUS_DAC1_CH2    (COMP_CSR_COMP1INSEL_2                         | COMP_CSR_COMP1INSEL_0) /*!< Comparator input minus connected to DAC1 channel 2 (DAC_OUT2)  */

-#define LL_COMP_INPUT_MINUS_IO1         (COMP_CSR_COMP1INSEL_2 | COMP_CSR_COMP1INSEL_1                        ) /*!< Comparator input minus connected to IO1 (pin PA0 for COMP1, pin PA2 for COMP2) */

-/**

-  * @}

-  */

-

-/** @defgroup COMP_LL_EC_INPUT_HYSTERESIS Comparator input - Hysteresis

-  * @{

-  */

-#define LL_COMP_HYSTERESIS_NONE         ((uint32_t)0x00000000U)                       /*!< No hysteresis */

-#define LL_COMP_HYSTERESIS_LOW          (                       COMP_CSR_COMP1HYST_0) /*!< Hysteresis level low */

-#define LL_COMP_HYSTERESIS_MEDIUM       (COMP_CSR_COMP1HYST_1                       ) /*!< Hysteresis level medium */

-#define LL_COMP_HYSTERESIS_HIGH         (COMP_CSR_COMP1HYST_1 | COMP_CSR_COMP1HYST_0) /*!< Hysteresis level high */

-/**

-  * @}

-  */

-

-/** @defgroup COMP_LL_EC_OUTPUT_SELECTION Comparator output - Output selection

-  * @{

-  */

-/* Note: Output redirection is common for COMP1 and COMP2 */

-#define LL_COMP_OUTPUT_NONE             ((uint32_t)0x00000000U)                                                    /*!< COMP output is not connected to other peripherals (except GPIO and EXTI that are always connected to COMP output) */

-#define LL_COMP_OUTPUT_TIM1_BKIN        (COMP_CSR_COMP1OUTSEL_0)                                                   /*!< COMP output connected to TIM1 break input (BKIN) */

-#define LL_COMP_OUTPUT_TIM1_IC1         (COMP_CSR_COMP1OUTSEL_1)                                                   /*!< COMP output connected to TIM1 input capture 1 */

-#define LL_COMP_OUTPUT_TIM1_OCCLR       (COMP_CSR_COMP1OUTSEL_1 | COMP_CSR_COMP1OUTSEL_0)                          /*!< COMP output connected to TIM1 OCREF clear */

-#define LL_COMP_OUTPUT_TIM2_IC4         (COMP_CSR_COMP1OUTSEL_2)                                                   /*!< COMP output connected to TIM2 input capture 4 */

-#define LL_COMP_OUTPUT_TIM2_OCCLR       (COMP_CSR_COMP1OUTSEL_2 | COMP_CSR_COMP1OUTSEL_0)                          /*!< COMP output connected to TIM2 OCREF clear */

-#define LL_COMP_OUTPUT_TIM3_IC1         (COMP_CSR_COMP1OUTSEL_2 | COMP_CSR_COMP1OUTSEL_1)                          /*!< COMP output connected to TIM3 input capture 1 */

-#define LL_COMP_OUTPUT_TIM3_OCCLR       (COMP_CSR_COMP1OUTSEL_2 | COMP_CSR_COMP1OUTSEL_1 | COMP_CSR_COMP1OUTSEL_0) /*!< COMP output connected to TIM3 OCREF clear */

-/**

-  * @}

-  */

-

-/** @defgroup COMP_LL_EC_OUTPUT_POLARITY Comparator output - Output polarity

-  * @{

-  */

-#define LL_COMP_OUTPUTPOL_NONINVERTED   ((uint32_t)0x00000000U)  /*!< COMP output polarity is not inverted: comparator output is high when the plus (non-inverting) input is at a higher voltage than the minus (inverting) input */

-#define LL_COMP_OUTPUTPOL_INVERTED      (COMP_CSR_COMP1POL)      /*!< COMP output polarity is inverted: comparator output is low when the plus (non-inverting) input is at a lower voltage than the minus (inverting) input */

-/**

-  * @}

-  */

-

-/** @defgroup COMP_LL_EC_OUTPUT_LEVEL Comparator output - Output level

-  * @{

-  */

-#define LL_COMP_OUTPUT_LEVEL_LOW        ((uint32_t)0x00000000U) /*!< Comparator output level low (if the polarity is not inverted, otherwise to be complemented) */

-#define LL_COMP_OUTPUT_LEVEL_HIGH       ((uint32_t)0x00000001U) /*!< Comparator output level high (if the polarity is not inverted, otherwise to be complemented) */

-/**

-  * @}

-  */

-

-/** @defgroup COMP_LL_EC_HW_DELAYS  Definitions of COMP hardware constraints delays

-  * @note   Only COMP IP HW delays are defined in COMP LL driver driver,

-  *         not timeout values.

-  *         For details on delays values, refer to descriptions in source code

-  *         above each literal definition.

-  * @{

-  */

-

-/* Delay for comparator startup time.                                         */

-/* Note: Delay required to reach propagation delay specification.             */

-/* Literal set to maximum value (refer to device datasheet,                   */

-/* parameter "tSTART").                                                       */

-/* Unit: us                                                                   */

-#define LL_COMP_DELAY_STARTUP_US          ((uint32_t) 60U)  /*!< Delay for COMP startup time */

-

-/* Delay for comparator voltage scaler stabilization time                     */

-/* (voltage from VrefInt, delay based on VrefInt startup time).               */

-/* Literal set to maximum value (refer to device datasheet,                   */

-/* parameter "tS_SC").                                                        */

-/* Unit: us                                                                   */

-#define LL_COMP_DELAY_VOLTAGE_SCALER_STAB_US ((uint32_t) 200U)  /*!< Delay for COMP voltage scaler stabilization time */

-

-

-/**

-  * @}

-  */

-

-/**

-  * @}

-  */

-

-/* Exported macro ------------------------------------------------------------*/

-/** @defgroup COMP_LL_Exported_Macros COMP Exported Macros

-  * @{

-  */

-/** @defgroup COMP_LL_EM_WRITE_READ Common write and read registers macro

-  * @{

-  */

-

-/**

-  * @brief  Write a value in COMP register

-  * @param  __INSTANCE__ comparator instance

-  * @param  __REG__ Register to be written

-  * @param  __VALUE__ Value to be written in the register

-  * @retval None

-  */

-#define LL_COMP_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__))

-

-/**

-  * @brief  Read a value in COMP register

-  * @param  __INSTANCE__ comparator instance

-  * @param  __REG__ Register to be read

-  * @retval Register value

-  */

-#define LL_COMP_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__)

-/**

-  * @}

-  */

-

-/** @defgroup COMP_LL_EM_HELPER_MACRO COMP helper macro

-  * @{

-  */

-

-/**

-  * @brief  Helper macro to select the COMP common instance

-  *         to which is belonging the selected COMP instance.

-  * @note   COMP common register instance can be used to

-  *         set parameters common to several COMP instances.

-  *         Refer to functions having argument "COMPxy_COMMON" as parameter.

-  * @param  __COMPx__ COMP instance

-  * @retval COMP common instance or value "0" if there is no COMP common instance.

-  */

-#define __LL_COMP_COMMON_INSTANCE(__COMPx__)                                   \

-  (COMP12_COMMON)

-

-/**

-  * @}

-  */

-

-/**

-  * @}

-  */

-

-/* Exported functions --------------------------------------------------------*/

-/** @defgroup COMP_LL_Exported_Functions COMP Exported Functions

-  * @{

-  */

-

-/** @defgroup COMP_LL_EF_Configuration_comparator_common Configuration of COMP hierarchical scope: common to several COMP instances

-  * @{

-  */

-

-/**

-  * @brief  Set window mode of a pair of comparators instances

-  *         (2 consecutive COMP instances odd and even COMP<x> and COMP<x+1>).

-  * @rmtoll CSR      WNDWEN         LL_COMP_SetCommonWindowMode

-  * @param  COMPxy_COMMON Comparator common instance

-  *         (can be set directly from CMSIS definition or by using helper macro @ref __LL_COMP_COMMON_INSTANCE() )

-  * @param  WindowMode This parameter can be one of the following values:

-  *         @arg @ref LL_COMP_WINDOWMODE_DISABLE

-  *         @arg @ref LL_COMP_WINDOWMODE_COMP1_INPUT_PLUS_COMMON

-  * @retval None

-  */

-__STATIC_INLINE void LL_COMP_SetCommonWindowMode(COMP_Common_TypeDef *COMPxy_COMMON, uint32_t WindowMode)

-{

-  MODIFY_REG(COMPxy_COMMON->CSR, COMP_CSR_WNDWEN, WindowMode);

-}

-

-/**

-  * @brief  Get window mode of a pair of comparators instances

-  *         (2 consecutive COMP instances odd and even COMP<x> and COMP<x+1>).

-  * @rmtoll CSR      WNDWEN         LL_COMP_GetCommonWindowMode

-  * @param  COMPxy_COMMON Comparator common instance

-  *         (can be set directly from CMSIS definition or by using helper macro @ref __LL_COMP_COMMON_INSTANCE() )

-  * @retval Returned value can be one of the following values:

-  *         @arg @ref LL_COMP_WINDOWMODE_DISABLE

-  *         @arg @ref LL_COMP_WINDOWMODE_COMP1_INPUT_PLUS_COMMON

-  */

-__STATIC_INLINE uint32_t LL_COMP_GetCommonWindowMode(COMP_Common_TypeDef *COMPxy_COMMON)

-{

-  return (uint32_t)(READ_BIT(COMPxy_COMMON->CSR, COMP_CSR_WNDWEN));

-}

-

-/**

-  * @}

-  */

-

-/** @defgroup COMP_LL_EF_Configuration_comparator_modes Configuration of comparator modes

-  * @{

-  */

-

-/**

-  * @brief  Set comparator instance operating mode to adjust power and speed.

-  * @rmtoll CSR      COMP1MODE      LL_COMP_SetPowerMode\n

-  *                  COMP2MODE      LL_COMP_SetPowerMode

-  * @param  COMPx Comparator instance

-  * @param  PowerMode This parameter can be one of the following values:

-  *         @arg @ref LL_COMP_POWERMODE_HIGHSPEED

-  *         @arg @ref LL_COMP_POWERMODE_MEDIUMSPEED

-  *         @arg @ref LL_COMP_POWERMODE_LOWPOWER

-  *         @arg @ref LL_COMP_POWERMODE_ULTRALOWPOWER

-  * @retval None

-  */

-__STATIC_INLINE void LL_COMP_SetPowerMode(COMP_TypeDef *COMPx, uint32_t PowerMode)

-{

-  MODIFY_REG(COMP->CSR,

-             COMP_CSR_COMP1MODE << __COMP_BITOFFSET_INSTANCE(COMPx),

-             PowerMode          << __COMP_BITOFFSET_INSTANCE(COMPx) );

-}

-

-/**

-  * @brief  Get comparator instance operating mode to adjust power and speed.

-  * @rmtoll CSR      COMP1MODE      LL_COMP_GetPowerMode\n

-  *                     COMP2MODE       LL_COMP_GetPowerMode

-  * @param  COMPx Comparator instance

-  * @retval Returned value can be one of the following values:

-  *         @arg @ref LL_COMP_POWERMODE_HIGHSPEED

-  *         @arg @ref LL_COMP_POWERMODE_MEDIUMSPEED

-  *         @arg @ref LL_COMP_POWERMODE_LOWPOWER

-  *         @arg @ref LL_COMP_POWERMODE_ULTRALOWPOWER

-  */

-__STATIC_INLINE uint32_t LL_COMP_GetPowerMode(COMP_TypeDef *COMPx)

-{

-  return (uint32_t)(READ_BIT(COMP->CSR,

-                             COMP_CSR_COMP1MODE << __COMP_BITOFFSET_INSTANCE(COMPx))

-                    >> __COMP_BITOFFSET_INSTANCE(COMPx)

-                   );

-}

-

-/**

-  * @}

-  */

-

-/** @defgroup COMP_LL_EF_Configuration_comparator_inputs Configuration of comparator inputs

-  * @{

-  */

-

-/**

-  * @brief  Set comparator inputs minus (inverting) and plus (non-inverting).

-  * @note   In case of comparator input selected to be connected to IO:

-  *         GPIO pins are specific to each comparator instance.

-  *         Refer to description of parameters or to reference manual.

-  * @rmtoll CSR      COMP1INSEL     LL_COMP_ConfigInputs\n

-  *         CSR      COMP2INSEL     LL_COMP_ConfigInputs\n

-  *         CSR      COMP1SW1       LL_COMP_ConfigInputs

-  * @param  COMPx Comparator instance

-  * @param  InputMinus This parameter can be one of the following values:

-  *         @arg @ref LL_COMP_INPUT_MINUS_1_4VREFINT

-  *         @arg @ref LL_COMP_INPUT_MINUS_1_2VREFINT

-  *         @arg @ref LL_COMP_INPUT_MINUS_3_4VREFINT

-  *         @arg @ref LL_COMP_INPUT_MINUS_VREFINT

-  *         @arg @ref LL_COMP_INPUT_MINUS_DAC1_CH1

-  *         @arg @ref LL_COMP_INPUT_MINUS_DAC1_CH2

-  *         @arg @ref LL_COMP_INPUT_MINUS_IO1

-  * @param  InputPlus This parameter can be one of the following values:

-  *         @arg @ref LL_COMP_INPUT_PLUS_IO1

-  *         @arg @ref LL_COMP_INPUT_PLUS_DAC1_CH1 (1)

-  *         

-  *         (1) Parameter available only on COMP instance: COMP1.

-  * @retval None

-  */

-__STATIC_INLINE void LL_COMP_ConfigInputs(COMP_TypeDef *COMPx, uint32_t InputMinus, uint32_t InputPlus)

-{

-  /* Note: Connection switch is applicable only to COMP instance COMP1,       */

-  /*       therefore if COMP2 is selected the equivalent bit is               */

-  /*       kept unmodified.                                                   */

-  MODIFY_REG(COMP->CSR,

-             (COMP_CSR_COMP1INSEL | (COMP_CSR_COMP1SW1 * __COMP_IS_INSTANCE_ODD(COMPx))) << __COMP_BITOFFSET_INSTANCE(COMPx),

-             (InputMinus | InputPlus)                                        << __COMP_BITOFFSET_INSTANCE(COMPx) );

-}

-

-/**

-  * @brief  Set comparator input plus (non-inverting).

-  * @note   In case of comparator input selected to be connected to IO:

-  *         GPIO pins are specific to each comparator instance.

-  *         Refer to description of parameters or to reference manual.

-  * @rmtoll CSR      COMP1INSEL     LL_COMP_SetInputPlus\n

-  *         CSR      COMP2INSEL     LL_COMP_SetInputPlus

-  * @param  COMPx Comparator instance

-  * @param  InputPlus This parameter can be one of the following values:

-  *         @arg @ref LL_COMP_INPUT_PLUS_IO1

-  *         @arg @ref LL_COMP_INPUT_PLUS_DAC1_CH1 (1)

-  *         

-  *         (1) Parameter available only on COMP instance: COMP1.

-  * @retval None

-  */

-__STATIC_INLINE void LL_COMP_SetInputPlus(COMP_TypeDef *COMPx, uint32_t InputPlus)

-{

-  /* Note: Connection switch is applicable only to COMP instance COMP1,       */

-  /*       therefore if COMP2 is selected the equivalent bit is               */

-  /*       kept unmodified.                                                   */

-  MODIFY_REG(COMP->CSR,

-             (COMP_CSR_COMP1SW1 * __COMP_IS_INSTANCE_ODD(COMPx)) << __COMP_BITOFFSET_INSTANCE(COMPx),

-             InputPlus                                           << __COMP_BITOFFSET_INSTANCE(COMPx) );

-}

-

-/**

-  * @brief  Get comparator input plus (non-inverting).

-  * @note   In case of comparator input selected to be connected to IO:

-  *         GPIO pins are specific to each comparator instance.

-  *         Refer to description of parameters or to reference manual.

-  * @rmtoll CSR      COMP1INSEL     LL_COMP_GetInputPlus\n

-  *         CSR      COMP2INSEL     LL_COMP_GetInputPlus

-  * @param  COMPx Comparator instance

-  * @retval Returned value can be one of the following values:

-  *         @arg @ref LL_COMP_INPUT_PLUS_IO1

-  *         @arg @ref LL_COMP_INPUT_PLUS_DAC1_CH1 (1)

-  *         

-  *         (1) Parameter available only on COMP instance: COMP1.

-  */

-__STATIC_INLINE uint32_t LL_COMP_GetInputPlus(COMP_TypeDef *COMPx)

-{

-  /* Note: Connection switch is applicable only to COMP instance COMP1,       */

-  /*       therefore is COMP2 is selected the returned value will be null.    */

-  return (uint32_t)(READ_BIT(COMP->CSR,

-                             COMP_CSR_COMP1SW1 << __COMP_BITOFFSET_INSTANCE(COMPx))

-                    >> __COMP_BITOFFSET_INSTANCE(COMPx)

-                   );

-}

-

-/**

-  * @brief  Set comparator input minus (inverting).

-  * @note   In case of comparator input selected to be connected to IO:

-  *         GPIO pins are specific to each comparator instance.

-  *         Refer to description of parameters or to reference manual.

-  * @rmtoll CSR      COMP1SW1       LL_COMP_SetInputMinus

-  * @param  COMPx Comparator instance

-  * @param  InputMinus This parameter can be one of the following values:

-  *         @arg @ref LL_COMP_INPUT_MINUS_1_4VREFINT

-  *         @arg @ref LL_COMP_INPUT_MINUS_1_2VREFINT

-  *         @arg @ref LL_COMP_INPUT_MINUS_3_4VREFINT

-  *         @arg @ref LL_COMP_INPUT_MINUS_VREFINT

-  *         @arg @ref LL_COMP_INPUT_MINUS_DAC1_CH1

-  *         @arg @ref LL_COMP_INPUT_MINUS_DAC1_CH2

-  *         @arg @ref LL_COMP_INPUT_MINUS_IO1

-  * @retval None

-  */

-__STATIC_INLINE void LL_COMP_SetInputMinus(COMP_TypeDef *COMPx, uint32_t InputMinus)

-{

-  MODIFY_REG(COMP->CSR,

-             COMP_CSR_COMP1INSEL << __COMP_BITOFFSET_INSTANCE(COMPx),

-             InputMinus          << __COMP_BITOFFSET_INSTANCE(COMPx) );

-}

-

-/**

-  * @brief  Get comparator input minus (inverting).

-  * @note   In case of comparator input selected to be connected to IO:

-  *         GPIO pins are specific to each comparator instance.

-  *         Refer to description of parameters or to reference manual.

-  * @rmtoll CSR      COMP1SW1       LL_COMP_GetInputMinus

-  * @param  COMPx Comparator instance

-  * @retval Returned value can be one of the following values:

-  *         @arg @ref LL_COMP_INPUT_MINUS_1_4VREFINT

-  *         @arg @ref LL_COMP_INPUT_MINUS_1_2VREFINT

-  *         @arg @ref LL_COMP_INPUT_MINUS_3_4VREFINT

-  *         @arg @ref LL_COMP_INPUT_MINUS_VREFINT

-  *         @arg @ref LL_COMP_INPUT_MINUS_DAC1_CH1

-  *         @arg @ref LL_COMP_INPUT_MINUS_DAC1_CH2

-  *         @arg @ref LL_COMP_INPUT_MINUS_IO1

-  */

-__STATIC_INLINE uint32_t LL_COMP_GetInputMinus(COMP_TypeDef *COMPx)

-{

-  return (uint32_t)(READ_BIT(COMP->CSR,

-                             COMP_CSR_COMP1INSEL << __COMP_BITOFFSET_INSTANCE(COMPx))

-                    >> __COMP_BITOFFSET_INSTANCE(COMPx)

-                   );

-}

-

-/**

-  * @brief  Set comparator instance hysteresis mode of the input minus (inverting input).

-  * @rmtoll CSR      COMP1HYST      LL_COMP_SetInputHysteresis\n

-  *                  COMP2HYST      LL_COMP_SetInputHysteresis

-  * @param  COMPx Comparator instance

-  * @param  InputHysteresis This parameter can be one of the following values:

-  *         @arg @ref LL_COMP_HYSTERESIS_NONE

-  *         @arg @ref LL_COMP_HYSTERESIS_LOW

-  *         @arg @ref LL_COMP_HYSTERESIS_MEDIUM

-  *         @arg @ref LL_COMP_HYSTERESIS_HIGH

-  * @retval None

-  */

-__STATIC_INLINE void LL_COMP_SetInputHysteresis(COMP_TypeDef *COMPx, uint32_t InputHysteresis)

-{

-  MODIFY_REG(COMP->CSR,

-             COMP_CSR_COMP1HYST << __COMP_BITOFFSET_INSTANCE(COMPx),

-             InputHysteresis    << __COMP_BITOFFSET_INSTANCE(COMPx) );

-}

-

-/**

-  * @brief  Get comparator instance hysteresis mode of the minus (inverting) input.

-  * @rmtoll CSR      COMP1HYST      LL_COMP_GetInputHysteresis\n

-  *                  COMP2HYST      LL_COMP_GetInputHysteresis

-  * @param  COMPx Comparator instance

-  * @retval Returned value can be one of the following values:

-  *         @arg @ref LL_COMP_HYSTERESIS_NONE

-  *         @arg @ref LL_COMP_HYSTERESIS_LOW

-  *         @arg @ref LL_COMP_HYSTERESIS_MEDIUM

-  *         @arg @ref LL_COMP_HYSTERESIS_HIGH

-  */

-__STATIC_INLINE uint32_t LL_COMP_GetInputHysteresis(COMP_TypeDef *COMPx)

-{

-  return (uint32_t)(READ_BIT(COMP->CSR,

-                             COMP_CSR_COMP1HYST << __COMP_BITOFFSET_INSTANCE(COMPx))

-                    >> __COMP_BITOFFSET_INSTANCE(COMPx)

-                   );

-

-}

-

-/**

-  * @}

-  */

-

-/** @defgroup COMP_LL_EF_Configuration_comparator_output Configuration of comparator output

-  * @{

-  */

-

-/**

-  * @brief  Set comparator output selection.

-  * @note   Availability of parameters of output selection to timer

-  *         depends on timers availability on the selected device.

-  * @rmtoll CSR      COMP1OUTSEL    LL_COMP_SetOutputSelection\n

-  *                  COMP2OUTSEL    LL_COMP_SetOutputSelection

-  * @param  COMPx Comparator instance

-  * @param  OutputSelection This parameter can be one of the following values:

-  *         @arg @ref LL_COMP_OUTPUT_NONE

-  *         @arg @ref LL_COMP_OUTPUT_TIM1_BKIN      (1)

-  *         @arg @ref LL_COMP_OUTPUT_TIM1_IC1       (1)

-  *         @arg @ref LL_COMP_OUTPUT_TIM1_OCCLR     (1)

-  *         @arg @ref LL_COMP_OUTPUT_TIM2_IC4       (1)

-  *         @arg @ref LL_COMP_OUTPUT_TIM2_OCCLR     (1)

-  *         @arg @ref LL_COMP_OUTPUT_TIM3_IC1       (1)

-  *         @arg @ref LL_COMP_OUTPUT_TIM3_OCCLR     (1)

-  *         

-  *         (1) Parameter availability depending on timer availability

-  *             on the selected device.

-  * @retval None

-  */

-__STATIC_INLINE void LL_COMP_SetOutputSelection(COMP_TypeDef *COMPx, uint32_t OutputSelection)

-{

-  MODIFY_REG(COMP->CSR,

-             COMP_CSR_COMP1OUTSEL << __COMP_BITOFFSET_INSTANCE(COMPx),

-             OutputSelection      << __COMP_BITOFFSET_INSTANCE(COMPx) );

-}

-

-/**

-  * @brief  Get comparator output selection.

-  * @note   Availability of parameters of output selection to timer

-  *         depends on timers availability on the selected device.

-  * @rmtoll CSR      COMP1OUTSEL    LL_COMP_GetOutputSelection\n

-  *                  COMP2OUTSEL    LL_COMP_GetOutputSelection

-  * @param  COMPx Comparator instance

-  * @retval Returned value can be one of the following values:

-  *         @arg @ref LL_COMP_OUTPUT_NONE

-  *         @arg @ref LL_COMP_OUTPUT_TIM1_BKIN      (1)

-  *         @arg @ref LL_COMP_OUTPUT_TIM1_IC1       (1)

-  *         @arg @ref LL_COMP_OUTPUT_TIM1_OCCLR     (1)

-  *         @arg @ref LL_COMP_OUTPUT_TIM2_IC4       (1)

-  *         @arg @ref LL_COMP_OUTPUT_TIM2_OCCLR     (1)

-  *         @arg @ref LL_COMP_OUTPUT_TIM3_IC1       (1)

-  *         @arg @ref LL_COMP_OUTPUT_TIM3_OCCLR     (1)

-  *         

-  *         (1) Parameter availability depending on timer availability

-  *             on the selected device.

-  */

-__STATIC_INLINE uint32_t LL_COMP_GetOutputSelection(COMP_TypeDef *COMPx)

-{

-  return (uint32_t)(READ_BIT(COMP->CSR,

-                             COMP_CSR_COMP1OUTSEL << __COMP_BITOFFSET_INSTANCE(COMPx))

-                    >> __COMP_BITOFFSET_INSTANCE(COMPx)

-                   );

-}

-

-/**

-  * @brief  Set comparator instance output polarity.

-  * @rmtoll CSR      COMP1POL       LL_COMP_SetOutputPolarity\n

-  *                  COMP2POL       LL_COMP_SetOutputPolarity

-  * @param  COMPx Comparator instance

-  * @param  OutputPolarity This parameter can be one of the following values:

-  *         @arg @ref LL_COMP_OUTPUTPOL_NONINVERTED

-  *         @arg @ref LL_COMP_OUTPUTPOL_INVERTED

-  * @retval None

-  */

-__STATIC_INLINE void LL_COMP_SetOutputPolarity(COMP_TypeDef *COMPx, uint32_t OutputPolarity)

-{

-  MODIFY_REG(COMP->CSR,

-             COMP_CSR_COMP1POL << __COMP_BITOFFSET_INSTANCE(COMPx),

-             OutputPolarity    << __COMP_BITOFFSET_INSTANCE(COMPx) );

-}

-

-/**

-  * @brief  Get comparator instance output polarity.

-  * @rmtoll CSR      COMP1POL       LL_COMP_GetOutputPolarity\n

-  *                  COMP2POL       LL_COMP_GetOutputPolarity

-  * @param  COMPx Comparator instance

-  * @retval Returned value can be one of the following values:

-  *         @arg @ref LL_COMP_OUTPUTPOL_NONINVERTED

-  *         @arg @ref LL_COMP_OUTPUTPOL_INVERTED

-  */

-__STATIC_INLINE uint32_t LL_COMP_GetOutputPolarity(COMP_TypeDef *COMPx)

-{

-  return (uint32_t)(READ_BIT(COMP->CSR,

-                             COMP_CSR_COMP1POL << __COMP_BITOFFSET_INSTANCE(COMPx))

-                    >> __COMP_BITOFFSET_INSTANCE(COMPx)

-                   );

-}

-

-/**

-  * @}

-  */

-

-/** @defgroup COMP_LL_EF_Operation Operation on comparator instance

-  * @{

-  */

-

-/**

-  * @brief  Enable comparator instance.

-  * @note   After enable from off state, comparator requires a delay

-  *         to reach reach propagation delay specification.

-  *         Refer to device datasheet, parameter "tSTART".

-  * @rmtoll CSR      COMP1EN        LL_COMP_Enable\n

-  *         CSR      COMP2EN        LL_COMP_Enable

-  * @param  COMPx Comparator instance

-  * @retval None

-  */

-__STATIC_INLINE void LL_COMP_Enable(COMP_TypeDef *COMPx)

-{

-  SET_BIT(COMP->CSR, COMP_CSR_COMP1EN << __COMP_BITOFFSET_INSTANCE(COMPx));

-}

-

-/**

-  * @brief  Disable comparator instance.

-  * @rmtoll CSR      COMP1EN        LL_COMP_Disable\n

-  *         CSR      COMP2EN        LL_COMP_Disable

-  * @param  COMPx Comparator instance

-  * @retval None

-  */

-__STATIC_INLINE void LL_COMP_Disable(COMP_TypeDef *COMPx)

-{

-  CLEAR_BIT(COMP->CSR, COMP_CSR_COMP1EN << __COMP_BITOFFSET_INSTANCE(COMPx));

-}

-

-/**

-  * @brief  Get comparator enable state

-  *         (0: COMP is disabled, 1: COMP is enabled)

-  * @rmtoll CSR      COMP1EN        LL_COMP_IsEnabled\n

-  *         CSR      COMP2EN        LL_COMP_IsEnabled

-  * @param  COMPx Comparator instance

-  * @retval State of bit (1 or 0).

-  */

-__STATIC_INLINE uint32_t LL_COMP_IsEnabled(COMP_TypeDef *COMPx)

-{

-  return (READ_BIT(COMP->CSR, COMP_CSR_COMP1EN << __COMP_BITOFFSET_INSTANCE(COMPx)) == COMP_CSR_COMP1EN << __COMP_BITOFFSET_INSTANCE(COMPx));

-}

-

-/**

-  * @brief  Lock comparator instance.

-  * @note   Once locked, comparator configuration can be accessed in read-only.

-  * @note   The only way to unlock the comparator is a device hardware reset.

-  * @rmtoll CSR      COMP1LOCK      LL_COMP_Lock\n

-  *         CSR      COMP2LOCK      LL_COMP_Lock

-  * @param  COMPx Comparator instance

-  * @retval None

-  */

-__STATIC_INLINE void LL_COMP_Lock(COMP_TypeDef *COMPx)

-{

-  SET_BIT(COMP->CSR, COMP_CSR_COMP1LOCK << __COMP_BITOFFSET_INSTANCE(COMPx));

-}

-

-/**

-  * @brief  Get comparator lock state

-  *         (0: COMP is unlocked, 1: COMP is locked).

-  * @note   Once locked, comparator configuration can be accessed in read-only.

-  * @note   The only way to unlock the comparator is a device hardware reset.

-  * @rmtoll CSR      COMP1LOCK      LL_COMP_IsLocked\n

-  *         CSR      COMP2LOCK      LL_COMP_IsLocked

-  * @param  COMPx Comparator instance

-  * @retval State of bit (1 or 0).

-  */

-__STATIC_INLINE uint32_t LL_COMP_IsLocked(COMP_TypeDef *COMPx)

-{

-  return (READ_BIT(COMP->CSR, COMP_CSR_COMP1LOCK << __COMP_BITOFFSET_INSTANCE(COMPx)) == COMP_CSR_COMP1LOCK << __COMP_BITOFFSET_INSTANCE(COMPx));

-}

-

-/**

-  * @brief  Read comparator instance output level.

-  * @note   The comparator output level depends on the selected polarity

-  *         (Refer to function @ref LL_COMP_SetOutputPolarity()).

-  *         If the comparator polarity is not inverted:

-  *          - Comparator output is low when the input plus

-  *            is at a lower voltage than the input minus

-  *          - Comparator output is high when the input plus

-  *            is at a higher voltage than the input minus

-  *         If the comparator polarity is inverted:

-  *          - Comparator output is high when the input plus

-  *            is at a lower voltage than the input minus

-  *          - Comparator output is low when the input plus

-  *            is at a higher voltage than the input minus

-  * @rmtoll CSR      COMP1OUT       LL_COMP_ReadOutputLevel\n

-  *         CSR      COMP2OUT       LL_COMP_ReadOutputLevel

-  * @param  COMPx Comparator instance

-  * @retval Returned value can be one of the following values:

-  *         @arg @ref LL_COMP_OUTPUT_LEVEL_LOW

-  *         @arg @ref LL_COMP_OUTPUT_LEVEL_HIGH

-  */

-__STATIC_INLINE uint32_t LL_COMP_ReadOutputLevel(COMP_TypeDef *COMPx)

-{

-  return (uint32_t)(READ_BIT(COMP->CSR,

-                             COMP_CSR_COMP1OUT << __COMP_BITOFFSET_INSTANCE(COMPx))

-                    >> (__COMP_BITOFFSET_INSTANCE(COMPx) + LL_COMP_OUTPUT_LEVEL_BITOFFSET_POS)

-                   );

-}

-

-/**

-  * @}

-  */

-

-#if defined(USE_FULL_LL_DRIVER)

-/** @defgroup COMP_LL_EF_Init Initialization and de-initialization functions

-  * @{

-  */

-

-ErrorStatus LL_COMP_DeInit(COMP_TypeDef *COMPx);

-ErrorStatus LL_COMP_Init(COMP_TypeDef *COMPx, LL_COMP_InitTypeDef *COMP_InitStruct);

-void        LL_COMP_StructInit(LL_COMP_InitTypeDef *COMP_InitStruct);

-

-/**

-  * @}

-  */

-#endif /* USE_FULL_LL_DRIVER */

-

-/**

-  * @}

-  */

-

-/**

-  * @}

-  */

-

-#endif /* COMP1 || COMP2 */

-

-/**

-  * @}

-  */

-

-#ifdef __cplusplus

-}

-#endif

-

-#endif /* __STM32F0xx_LL_COMP_H */

-

-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/