minkbd: repo restructure

1 files changed, 0 insertions, 189 deletions

diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h
deleted file mode 100644
index e716606..0000000
--- a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_pwr.h
+++ /dev/null
@@ -1,189 +0,0 @@
-/**

-  ******************************************************************************

-  * @file    stm32f0xx_hal_pwr.h

-  * @author  MCD Application Team

-  * @brief   Header file of PWR HAL module.

-  ******************************************************************************

-  * @attention

-  *

-  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.

-  * All rights reserved.</center></h2>

-  *

-  * This software component is licensed by ST under BSD 3-Clause license,

-  * the "License"; You may not use this file except in compliance with the

-  * License. You may obtain a copy of the License at:

-  *                        opensource.org/licenses/BSD-3-Clause

-  *

-  ******************************************************************************

-  */

-

-/* Define to prevent recursive inclusion -------------------------------------*/

-#ifndef __STM32F0xx_HAL_PWR_H

-#define __STM32F0xx_HAL_PWR_H

-

-#ifdef __cplusplus

- extern "C" {

-#endif

-

-/* Includes ------------------------------------------------------------------*/

-#include "stm32f0xx_hal_def.h"

-

-/** @addtogroup STM32F0xx_HAL_Driver

-  * @{

-  */

-

-/** @addtogroup PWR PWR

-  * @{

-  */

-

-/* Exported types ------------------------------------------------------------*/

-/* Exported constants --------------------------------------------------------*/

-

-/** @defgroup PWR_Exported_Constants PWR Exported Constants

-  * @{

-  */ 

-

-/** @defgroup PWR_Regulator_state_in_STOP_mode PWR Regulator state in STOP mode

-  * @{

-  */

-#define PWR_MAINREGULATOR_ON                        (0x00000000U)

-#define PWR_LOWPOWERREGULATOR_ON                    PWR_CR_LPDS

-

-#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_ON) || \

-                                     ((REGULATOR) == PWR_LOWPOWERREGULATOR_ON))

-/**

-  * @}

-  */

-

-/** @defgroup PWR_SLEEP_mode_entry PWR SLEEP mode entry

-  * @{

-  */

-#define PWR_SLEEPENTRY_WFI              ((uint8_t)0x01U)

-#define PWR_SLEEPENTRY_WFE              ((uint8_t)0x02U)

-#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPENTRY_WFI) || ((ENTRY) == PWR_SLEEPENTRY_WFE))

-/**

-  * @}

-  */

-

-/** @defgroup PWR_STOP_mode_entry PWR STOP mode entry

-  * @{

-  */

-#define PWR_STOPENTRY_WFI               ((uint8_t)0x01U)

-#define PWR_STOPENTRY_WFE               ((uint8_t)0x02U)

-#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPENTRY_WFI) || ((ENTRY) == PWR_STOPENTRY_WFE))

-/**

-  * @}

-  */

-

-

-/**

-  * @}

-  */

-

-/* Exported macro ------------------------------------------------------------*/

-/** @defgroup PWR_Exported_Macro PWR Exported Macro

-  * @{

-  */

-

-/** @brief  Check PWR flag is set or not.

-  * @param  __FLAG__ specifies the flag to check.

-  *           This parameter can be one of the following values:

-  *            @arg PWR_FLAG_WU: Wake Up flag. This flag indicates that a wakeup event

-  *                  was received from the WKUP pin or from the RTC alarm (Alarm A),

-  *                  RTC Tamper event, RTC TimeStamp event or RTC Wakeup.

-  *                  An additional wakeup event is detected if the WKUP pin is enabled

-  *                  (by setting the EWUP bit) when the WKUP pin level is already high.

-  *            @arg PWR_FLAG_SB: StandBy flag. This flag indicates that the system was

-  *                  resumed from StandBy mode.

-  *            @arg PWR_FLAG_PVDO: PVD Output. This flag is valid only if PVD is enabled

-  *                  by the HAL_PWR_EnablePVD() function. The PVD is stopped by Standby mode

-  *                  For this reason, this bit is equal to 0 after Standby or reset

-  *                  until the PVDE bit is set. 

-  *                  Warning: this Flag is not available on STM32F030x8 products

-  *            @arg PWR_FLAG_VREFINTRDY: This flag indicates that the internal reference

-  *                  voltage VREFINT is ready.

-  *                  Warning: this Flag is not available on STM32F030x8 products

-  * @retval The new state of __FLAG__ (TRUE or FALSE).

-  */

-#define __HAL_PWR_GET_FLAG(__FLAG__) ((PWR->CSR & (__FLAG__)) == (__FLAG__))

-

-/** @brief  Clear the PWR's pending flags.

-  * @param  __FLAG__ specifies the flag to clear.

-  *          This parameter can be one of the following values:

-  *            @arg PWR_FLAG_WU: Wake Up flag

-  *            @arg PWR_FLAG_SB: StandBy flag

-  */

-#define __HAL_PWR_CLEAR_FLAG(__FLAG__) (PWR->CR |=  (__FLAG__) << 2U)

-

-

-/**

-  * @}

-  */

-

-/* Include PWR HAL Extension module */

-#include "stm32f0xx_hal_pwr_ex.h"

-

-/* Exported functions --------------------------------------------------------*/

-

-/** @addtogroup PWR_Exported_Functions PWR Exported Functions

-  * @{

-  */

-  

-/** @addtogroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions 

-  * @{

-  */

-

-/* Initialization and de-initialization functions *****************************/

-void HAL_PWR_DeInit(void);

-

-/**

-  * @}

-  */

-

-/** @addtogroup PWR_Exported_Functions_Group2 Peripheral Control functions 

-  * @{

-  */

-

-/* Peripheral Control functions  **********************************************/

-void HAL_PWR_EnableBkUpAccess(void);

-void HAL_PWR_DisableBkUpAccess(void);

-

-/* WakeUp pins configuration functions ****************************************/

-void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinx);

-void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx);

-

-/* Low Power modes configuration functions ************************************/

-void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry);

-void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry);

-void HAL_PWR_EnterSTANDBYMode(void);

-

-void HAL_PWR_EnableSleepOnExit(void);

-void HAL_PWR_DisableSleepOnExit(void);

-void HAL_PWR_EnableSEVOnPend(void);

-void HAL_PWR_DisableSEVOnPend(void);

-

-/**

-  * @}

-  */

-

-/**

-  * @}

-  */

-

-/**

-  * @}

-  */

-

-/**

-  * @}

-  */

-

-#ifdef __cplusplus

-}

-#endif

-

-

-#endif /* __STM32F0xx_HAL_PWR_H */

-

-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

-