minkbd: repo restructure

1 files changed, 0 insertions, 782 deletions

diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h
deleted file mode 100644
index d61df7e..0000000
--- a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h
+++ /dev/null
@@ -1,782 +0,0 @@
-/**

-  ******************************************************************************

-  * @file    stm32f0xx_hal_i2c.h

-  * @author  MCD Application Team

-  * @brief   Header file of I2C HAL module.

-  ******************************************************************************

-  * @attention

-  *

-  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.

-  * All rights reserved.</center></h2>

-  *

-  * This software component is licensed by ST under BSD 3-Clause license,

-  * the "License"; You may not use this file except in compliance with the

-  * License. You may obtain a copy of the License at:

-  *                        opensource.org/licenses/BSD-3-Clause

-  *

-  ******************************************************************************

-  */

-

-/* Define to prevent recursive inclusion -------------------------------------*/

-#ifndef STM32F0xx_HAL_I2C_H

-#define STM32F0xx_HAL_I2C_H

-

-#ifdef __cplusplus

-extern "C" {

-#endif

-

-/* Includes ------------------------------------------------------------------*/

-#include "stm32f0xx_hal_def.h"

-

-/** @addtogroup STM32F0xx_HAL_Driver

-  * @{

-  */

-

-/** @addtogroup I2C

-  * @{

-  */

-

-/* Exported types ------------------------------------------------------------*/

-/** @defgroup I2C_Exported_Types I2C Exported Types

-  * @{

-  */

-

-/** @defgroup I2C_Configuration_Structure_definition I2C Configuration Structure definition

-  * @brief  I2C Configuration Structure definition

-  * @{

-  */

-typedef struct

-{

-  uint32_t Timing;              /*!< Specifies the I2C_TIMINGR_register value.

-                                  This parameter calculated by referring to I2C initialization

-                                         section in Reference manual */

-

-  uint32_t OwnAddress1;         /*!< Specifies the first device own address.

-                                  This parameter can be a 7-bit or 10-bit address. */

-

-  uint32_t AddressingMode;      /*!< Specifies if 7-bit or 10-bit addressing mode is selected.

-                                  This parameter can be a value of @ref I2C_ADDRESSING_MODE */

-

-  uint32_t DualAddressMode;     /*!< Specifies if dual addressing mode is selected.

-                                  This parameter can be a value of @ref I2C_DUAL_ADDRESSING_MODE */

-

-  uint32_t OwnAddress2;         /*!< Specifies the second device own address if dual addressing mode is selected

-                                  This parameter can be a 7-bit address. */

-

-  uint32_t OwnAddress2Masks;    /*!< Specifies the acknowledge mask address second device own address if dual addressing mode is selected

-                                  This parameter can be a value of @ref I2C_OWN_ADDRESS2_MASKS */

-

-  uint32_t GeneralCallMode;     /*!< Specifies if general call mode is selected.

-                                  This parameter can be a value of @ref I2C_GENERAL_CALL_ADDRESSING_MODE */

-

-  uint32_t NoStretchMode;       /*!< Specifies if nostretch mode is selected.

-                                  This parameter can be a value of @ref I2C_NOSTRETCH_MODE */

-

-} I2C_InitTypeDef;

-

-/**

-  * @}

-  */

-

-/** @defgroup HAL_state_structure_definition HAL state structure definition

-  * @brief  HAL State structure definition

-  * @note  HAL I2C State value coding follow below described bitmap :\n

-  *          b7-b6  Error information\n

-  *             00 : No Error\n

-  *             01 : Abort (Abort user request on going)\n

-  *             10 : Timeout\n

-  *             11 : Error\n

-  *          b5     Peripheral initialization status\n

-  *             0  : Reset (peripheral not initialized)\n

-  *             1  : Init done (peripheral initialized and ready to use. HAL I2C Init function called)\n

-  *          b4     (not used)\n

-  *             x  : Should be set to 0\n

-  *          b3\n

-  *             0  : Ready or Busy (No Listen mode ongoing)\n

-  *             1  : Listen (peripheral in Address Listen Mode)\n

-  *          b2     Intrinsic process state\n

-  *             0  : Ready\n

-  *             1  : Busy (peripheral busy with some configuration or internal operations)\n

-  *          b1     Rx state\n

-  *             0  : Ready (no Rx operation ongoing)\n

-  *             1  : Busy (Rx operation ongoing)\n

-  *          b0     Tx state\n

-  *             0  : Ready (no Tx operation ongoing)\n

-  *             1  : Busy (Tx operation ongoing)

-  * @{

-  */

-typedef enum

-{

-  HAL_I2C_STATE_RESET             = 0x00U,   /*!< Peripheral is not yet Initialized         */

-  HAL_I2C_STATE_READY             = 0x20U,   /*!< Peripheral Initialized and ready for use  */

-  HAL_I2C_STATE_BUSY              = 0x24U,   /*!< An internal process is ongoing            */

-  HAL_I2C_STATE_BUSY_TX           = 0x21U,   /*!< Data Transmission process is ongoing      */

-  HAL_I2C_STATE_BUSY_RX           = 0x22U,   /*!< Data Reception process is ongoing         */

-  HAL_I2C_STATE_LISTEN            = 0x28U,   /*!< Address Listen Mode is ongoing            */

-  HAL_I2C_STATE_BUSY_TX_LISTEN    = 0x29U,   /*!< Address Listen Mode and Data Transmission

-                                                 process is ongoing                         */

-  HAL_I2C_STATE_BUSY_RX_LISTEN    = 0x2AU,   /*!< Address Listen Mode and Data Reception

-                                                 process is ongoing                         */

-  HAL_I2C_STATE_ABORT             = 0x60U,   /*!< Abort user request ongoing                */

-  HAL_I2C_STATE_TIMEOUT           = 0xA0U,   /*!< Timeout state                             */

-  HAL_I2C_STATE_ERROR             = 0xE0U    /*!< Error                                     */

-

-} HAL_I2C_StateTypeDef;

-

-/**

-  * @}

-  */

-

-/** @defgroup HAL_mode_structure_definition HAL mode structure definition

-  * @brief  HAL Mode structure definition

-  * @note  HAL I2C Mode value coding follow below described bitmap :\n

-  *          b7     (not used)\n

-  *             x  : Should be set to 0\n

-  *          b6\n

-  *             0  : None\n

-  *             1  : Memory (HAL I2C communication is in Memory Mode)\n

-  *          b5\n

-  *             0  : None\n

-  *             1  : Slave (HAL I2C communication is in Slave Mode)\n

-  *          b4\n

-  *             0  : None\n

-  *             1  : Master (HAL I2C communication is in Master Mode)\n

-  *          b3-b2-b1-b0  (not used)\n

-  *             xxxx : Should be set to 0000

-  * @{

-  */

-typedef enum

-{

-  HAL_I2C_MODE_NONE               = 0x00U,   /*!< No I2C communication on going             */

-  HAL_I2C_MODE_MASTER             = 0x10U,   /*!< I2C communication is in Master Mode       */

-  HAL_I2C_MODE_SLAVE              = 0x20U,   /*!< I2C communication is in Slave Mode        */

-  HAL_I2C_MODE_MEM                = 0x40U    /*!< I2C communication is in Memory Mode       */

-

-} HAL_I2C_ModeTypeDef;

-

-/**

-  * @}

-  */

-

-/** @defgroup I2C_Error_Code_definition I2C Error Code definition

-  * @brief  I2C Error Code definition

-  * @{

-  */

-#define HAL_I2C_ERROR_NONE      (0x00000000U)    /*!< No error              */

-#define HAL_I2C_ERROR_BERR      (0x00000001U)    /*!< BERR error            */

-#define HAL_I2C_ERROR_ARLO      (0x00000002U)    /*!< ARLO error            */

-#define HAL_I2C_ERROR_AF        (0x00000004U)    /*!< ACKF error            */

-#define HAL_I2C_ERROR_OVR       (0x00000008U)    /*!< OVR error             */

-#define HAL_I2C_ERROR_DMA       (0x00000010U)    /*!< DMA transfer error    */

-#define HAL_I2C_ERROR_TIMEOUT   (0x00000020U)    /*!< Timeout error         */

-#define HAL_I2C_ERROR_SIZE      (0x00000040U)    /*!< Size Management error */

-#define HAL_I2C_ERROR_DMA_PARAM (0x00000080U)    /*!< DMA Parameter Error   */

-#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)

-#define HAL_I2C_ERROR_INVALID_CALLBACK  (0x00000100U)    /*!< Invalid Callback error */

-#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */

-#define HAL_I2C_ERROR_INVALID_PARAM     (0x00000200U)    /*!< Invalid Parameters error  */

-/**

-  * @}

-  */

-

-/** @defgroup I2C_handle_Structure_definition I2C handle Structure definition

-  * @brief  I2C handle Structure definition

-  * @{

-  */

-typedef struct __I2C_HandleTypeDef

-{

-  I2C_TypeDef                *Instance;      /*!< I2C registers base address                */

-

-  I2C_InitTypeDef            Init;           /*!< I2C communication parameters              */

-

-  uint8_t                    *pBuffPtr;      /*!< Pointer to I2C transfer buffer            */

-

-  uint16_t                   XferSize;       /*!< I2C transfer size                         */

-

-  __IO uint16_t              XferCount;      /*!< I2C transfer counter                      */

-

-  __IO uint32_t              XferOptions;    /*!< I2C sequantial transfer options, this parameter can

-                                                  be a value of @ref I2C_XFEROPTIONS */

-

-  __IO uint32_t              PreviousState;  /*!< I2C communication Previous state          */

-

-  HAL_StatusTypeDef(*XferISR)(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources);  /*!< I2C transfer IRQ handler function pointer */

-

-  DMA_HandleTypeDef          *hdmatx;        /*!< I2C Tx DMA handle parameters              */

-

-  DMA_HandleTypeDef          *hdmarx;        /*!< I2C Rx DMA handle parameters              */

-

-  HAL_LockTypeDef            Lock;           /*!< I2C locking object                        */

-

-  __IO HAL_I2C_StateTypeDef  State;          /*!< I2C communication state                   */

-

-  __IO HAL_I2C_ModeTypeDef   Mode;           /*!< I2C communication mode                    */

-

-  __IO uint32_t              ErrorCode;      /*!< I2C Error code                            */

-

-  __IO uint32_t              AddrEventCount; /*!< I2C Address Event counter                 */

-

-#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)

-  void (* MasterTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c);           /*!< I2C Master Tx Transfer completed callback */

-  void (* MasterRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c);           /*!< I2C Master Rx Transfer completed callback */

-  void (* SlaveTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c);            /*!< I2C Slave Tx Transfer completed callback  */

-  void (* SlaveRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c);            /*!< I2C Slave Rx Transfer completed callback  */

-  void (* ListenCpltCallback)(struct __I2C_HandleTypeDef *hi2c);             /*!< I2C Listen Complete callback              */

-  void (* MemTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c);              /*!< I2C Memory Tx Transfer completed callback */

-  void (* MemRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c);              /*!< I2C Memory Rx Transfer completed callback */

-  void (* ErrorCallback)(struct __I2C_HandleTypeDef *hi2c);                  /*!< I2C Error callback                        */

-  void (* AbortCpltCallback)(struct __I2C_HandleTypeDef *hi2c);              /*!< I2C Abort callback                        */

-

-  void (* AddrCallback)(struct __I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode);  /*!< I2C Slave Address Match callback */

-

-  void (* MspInitCallback)(struct __I2C_HandleTypeDef *hi2c);                /*!< I2C Msp Init callback                     */

-  void (* MspDeInitCallback)(struct __I2C_HandleTypeDef *hi2c);              /*!< I2C Msp DeInit callback                   */

-

-#endif  /* USE_HAL_I2C_REGISTER_CALLBACKS */

-} I2C_HandleTypeDef;

-

-#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)

-/**

-  * @brief  HAL I2C Callback ID enumeration definition

-  */

-typedef enum

-{

-  HAL_I2C_MASTER_TX_COMPLETE_CB_ID      = 0x00U,    /*!< I2C Master Tx Transfer completed callback ID  */

-  HAL_I2C_MASTER_RX_COMPLETE_CB_ID      = 0x01U,    /*!< I2C Master Rx Transfer completed callback ID  */

-  HAL_I2C_SLAVE_TX_COMPLETE_CB_ID       = 0x02U,    /*!< I2C Slave Tx Transfer completed callback ID   */

-  HAL_I2C_SLAVE_RX_COMPLETE_CB_ID       = 0x03U,    /*!< I2C Slave Rx Transfer completed callback ID   */

-  HAL_I2C_LISTEN_COMPLETE_CB_ID         = 0x04U,    /*!< I2C Listen Complete callback ID               */

-  HAL_I2C_MEM_TX_COMPLETE_CB_ID         = 0x05U,    /*!< I2C Memory Tx Transfer callback ID            */

-  HAL_I2C_MEM_RX_COMPLETE_CB_ID         = 0x06U,    /*!< I2C Memory Rx Transfer completed callback ID  */

-  HAL_I2C_ERROR_CB_ID                   = 0x07U,    /*!< I2C Error callback ID                         */

-  HAL_I2C_ABORT_CB_ID                   = 0x08U,    /*!< I2C Abort callback ID                         */

-

-  HAL_I2C_MSPINIT_CB_ID                 = 0x09U,    /*!< I2C Msp Init callback ID                      */

-  HAL_I2C_MSPDEINIT_CB_ID               = 0x0AU     /*!< I2C Msp DeInit callback ID                    */

-

-} HAL_I2C_CallbackIDTypeDef;

-

-/**

-  * @brief  HAL I2C Callback pointer definition

-  */

-typedef  void (*pI2C_CallbackTypeDef)(I2C_HandleTypeDef *hi2c); /*!< pointer to an I2C callback function */

-typedef  void (*pI2C_AddrCallbackTypeDef)(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode); /*!< pointer to an I2C Address Match callback function */

-

-#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */

-/**

-  * @}

-  */

-

-/**

-  * @}

-  */

-/* Exported constants --------------------------------------------------------*/

-

-/** @defgroup I2C_Exported_Constants I2C Exported Constants

-  * @{

-  */

-

-/** @defgroup I2C_XFEROPTIONS  I2C Sequential Transfer Options

-  * @{

-  */

-#define I2C_FIRST_FRAME                 ((uint32_t)I2C_SOFTEND_MODE)

-#define I2C_FIRST_AND_NEXT_FRAME        ((uint32_t)(I2C_RELOAD_MODE | I2C_SOFTEND_MODE))

-#define I2C_NEXT_FRAME                  ((uint32_t)(I2C_RELOAD_MODE | I2C_SOFTEND_MODE))

-#define I2C_FIRST_AND_LAST_FRAME        ((uint32_t)I2C_AUTOEND_MODE)

-#define I2C_LAST_FRAME                  ((uint32_t)I2C_AUTOEND_MODE)

-#define I2C_LAST_FRAME_NO_STOP          ((uint32_t)I2C_SOFTEND_MODE)

-

-/* List of XferOptions in usage of :

- * 1- Restart condition in all use cases (direction change or not)

- */

-#define  I2C_OTHER_FRAME                (0x000000AAU)

-#define  I2C_OTHER_AND_LAST_FRAME       (0x0000AA00U)

-/**

-  * @}

-  */

-

-/** @defgroup I2C_ADDRESSING_MODE I2C Addressing Mode

-  * @{

-  */

-#define I2C_ADDRESSINGMODE_7BIT         (0x00000001U)

-#define I2C_ADDRESSINGMODE_10BIT        (0x00000002U)

-/**

-  * @}

-  */

-

-/** @defgroup I2C_DUAL_ADDRESSING_MODE I2C Dual Addressing Mode

-  * @{

-  */

-#define I2C_DUALADDRESS_DISABLE         (0x00000000U)

-#define I2C_DUALADDRESS_ENABLE          I2C_OAR2_OA2EN

-/**

-  * @}

-  */

-

-/** @defgroup I2C_OWN_ADDRESS2_MASKS I2C Own Address2 Masks

-  * @{

-  */

-#define I2C_OA2_NOMASK                  ((uint8_t)0x00U)

-#define I2C_OA2_MASK01                  ((uint8_t)0x01U)

-#define I2C_OA2_MASK02                  ((uint8_t)0x02U)

-#define I2C_OA2_MASK03                  ((uint8_t)0x03U)

-#define I2C_OA2_MASK04                  ((uint8_t)0x04U)

-#define I2C_OA2_MASK05                  ((uint8_t)0x05U)

-#define I2C_OA2_MASK06                  ((uint8_t)0x06U)

-#define I2C_OA2_MASK07                  ((uint8_t)0x07U)

-/**

-  * @}

-  */

-

-/** @defgroup I2C_GENERAL_CALL_ADDRESSING_MODE I2C General Call Addressing Mode

-  * @{

-  */

-#define I2C_GENERALCALL_DISABLE         (0x00000000U)

-#define I2C_GENERALCALL_ENABLE          I2C_CR1_GCEN

-/**

-  * @}

-  */

-

-/** @defgroup I2C_NOSTRETCH_MODE I2C No-Stretch Mode

-  * @{

-  */

-#define I2C_NOSTRETCH_DISABLE           (0x00000000U)

-#define I2C_NOSTRETCH_ENABLE            I2C_CR1_NOSTRETCH

-/**

-  * @}

-  */

-

-/** @defgroup I2C_MEMORY_ADDRESS_SIZE I2C Memory Address Size

-  * @{

-  */

-#define I2C_MEMADD_SIZE_8BIT            (0x00000001U)

-#define I2C_MEMADD_SIZE_16BIT           (0x00000002U)

-/**

-  * @}

-  */

-

-/** @defgroup I2C_XFERDIRECTION I2C Transfer Direction Master Point of View

-  * @{

-  */

-#define I2C_DIRECTION_TRANSMIT          (0x00000000U)

-#define I2C_DIRECTION_RECEIVE           (0x00000001U)

-/**

-  * @}

-  */

-

-/** @defgroup I2C_RELOAD_END_MODE I2C Reload End Mode

-  * @{

-  */

-#define  I2C_RELOAD_MODE                I2C_CR2_RELOAD

-#define  I2C_AUTOEND_MODE               I2C_CR2_AUTOEND

-#define  I2C_SOFTEND_MODE               (0x00000000U)

-/**

-  * @}

-  */

-

-/** @defgroup I2C_START_STOP_MODE I2C Start or Stop Mode

-  * @{

-  */

-#define  I2C_NO_STARTSTOP               (0x00000000U)

-#define  I2C_GENERATE_STOP              (uint32_t)(0x80000000U | I2C_CR2_STOP)

-#define  I2C_GENERATE_START_READ        (uint32_t)(0x80000000U | I2C_CR2_START | I2C_CR2_RD_WRN)

-#define  I2C_GENERATE_START_WRITE       (uint32_t)(0x80000000U | I2C_CR2_START)

-/**

-  * @}

-  */

-

-/** @defgroup I2C_Interrupt_configuration_definition I2C Interrupt configuration definition

-  * @brief I2C Interrupt definition

-  *        Elements values convention: 0xXXXXXXXX

-  *           - XXXXXXXX  : Interrupt control mask

-  * @{

-  */

-#define I2C_IT_ERRI                     I2C_CR1_ERRIE

-#define I2C_IT_TCI                      I2C_CR1_TCIE

-#define I2C_IT_STOPI                    I2C_CR1_STOPIE

-#define I2C_IT_NACKI                    I2C_CR1_NACKIE

-#define I2C_IT_ADDRI                    I2C_CR1_ADDRIE

-#define I2C_IT_RXI                      I2C_CR1_RXIE

-#define I2C_IT_TXI                      I2C_CR1_TXIE

-/**

-  * @}

-  */

-

-/** @defgroup I2C_Flag_definition I2C Flag definition

-  * @{

-  */

-#define I2C_FLAG_TXE                    I2C_ISR_TXE

-#define I2C_FLAG_TXIS                   I2C_ISR_TXIS

-#define I2C_FLAG_RXNE                   I2C_ISR_RXNE

-#define I2C_FLAG_ADDR                   I2C_ISR_ADDR

-#define I2C_FLAG_AF                     I2C_ISR_NACKF

-#define I2C_FLAG_STOPF                  I2C_ISR_STOPF

-#define I2C_FLAG_TC                     I2C_ISR_TC

-#define I2C_FLAG_TCR                    I2C_ISR_TCR

-#define I2C_FLAG_BERR                   I2C_ISR_BERR

-#define I2C_FLAG_ARLO                   I2C_ISR_ARLO

-#define I2C_FLAG_OVR                    I2C_ISR_OVR

-#define I2C_FLAG_PECERR                 I2C_ISR_PECERR

-#define I2C_FLAG_TIMEOUT                I2C_ISR_TIMEOUT

-#define I2C_FLAG_ALERT                  I2C_ISR_ALERT

-#define I2C_FLAG_BUSY                   I2C_ISR_BUSY

-#define I2C_FLAG_DIR                    I2C_ISR_DIR

-/**

-  * @}

-  */

-

-/**

-  * @}

-  */

-

-/* Exported macros -----------------------------------------------------------*/

-

-/** @defgroup I2C_Exported_Macros I2C Exported Macros

-  * @{

-  */

-

-/** @brief Reset I2C handle state.

-  * @param  __HANDLE__ specifies the I2C Handle.

-  * @retval None

-  */

-#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)

-#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__)                do{                                                   \

-                                                                    (__HANDLE__)->State = HAL_I2C_STATE_RESET;       \

-                                                                    (__HANDLE__)->MspInitCallback = NULL;            \

-                                                                    (__HANDLE__)->MspDeInitCallback = NULL;          \

-                                                                  } while(0)

-#else

-#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__)                ((__HANDLE__)->State = HAL_I2C_STATE_RESET)

-#endif

-

-/** @brief  Enable the specified I2C interrupt.

-  * @param  __HANDLE__ specifies the I2C Handle.

-  * @param  __INTERRUPT__ specifies the interrupt source to enable.

-  *        This parameter can be one of the following values:

-  *            @arg @ref I2C_IT_ERRI  Errors interrupt enable

-  *            @arg @ref I2C_IT_TCI   Transfer complete interrupt enable

-  *            @arg @ref I2C_IT_STOPI STOP detection interrupt enable

-  *            @arg @ref I2C_IT_NACKI NACK received interrupt enable

-  *            @arg @ref I2C_IT_ADDRI Address match interrupt enable

-  *            @arg @ref I2C_IT_RXI   RX interrupt enable

-  *            @arg @ref I2C_IT_TXI   TX interrupt enable

-  *

-  * @retval None

-  */

-#define __HAL_I2C_ENABLE_IT(__HANDLE__, __INTERRUPT__)          ((__HANDLE__)->Instance->CR1 |= (__INTERRUPT__))

-

-/** @brief  Disable the specified I2C interrupt.

-  * @param  __HANDLE__ specifies the I2C Handle.

-  * @param  __INTERRUPT__ specifies the interrupt source to disable.

-  *        This parameter can be one of the following values:

-  *            @arg @ref I2C_IT_ERRI  Errors interrupt enable

-  *            @arg @ref I2C_IT_TCI   Transfer complete interrupt enable

-  *            @arg @ref I2C_IT_STOPI STOP detection interrupt enable

-  *            @arg @ref I2C_IT_NACKI NACK received interrupt enable

-  *            @arg @ref I2C_IT_ADDRI Address match interrupt enable

-  *            @arg @ref I2C_IT_RXI   RX interrupt enable

-  *            @arg @ref I2C_IT_TXI   TX interrupt enable

-  *

-  * @retval None

-  */

-#define __HAL_I2C_DISABLE_IT(__HANDLE__, __INTERRUPT__)         ((__HANDLE__)->Instance->CR1 &= (~(__INTERRUPT__)))

-

-/** @brief  Check whether the specified I2C interrupt source is enabled or not.

-  * @param  __HANDLE__ specifies the I2C Handle.

-  * @param  __INTERRUPT__ specifies the I2C interrupt source to check.

-  *          This parameter can be one of the following values:

-  *            @arg @ref I2C_IT_ERRI  Errors interrupt enable

-  *            @arg @ref I2C_IT_TCI   Transfer complete interrupt enable

-  *            @arg @ref I2C_IT_STOPI STOP detection interrupt enable

-  *            @arg @ref I2C_IT_NACKI NACK received interrupt enable

-  *            @arg @ref I2C_IT_ADDRI Address match interrupt enable

-  *            @arg @ref I2C_IT_RXI   RX interrupt enable

-  *            @arg @ref I2C_IT_TXI   TX interrupt enable

-  *

-  * @retval The new state of __INTERRUPT__ (SET or RESET).

-  */

-#define __HAL_I2C_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__)      ((((__HANDLE__)->Instance->CR1 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)

-

-/** @brief  Check whether the specified I2C flag is set or not.

-  * @param  __HANDLE__ specifies the I2C Handle.

-  * @param  __FLAG__ specifies the flag to check.

-  *        This parameter can be one of the following values:

-  *            @arg @ref I2C_FLAG_TXE     Transmit data register empty

-  *            @arg @ref I2C_FLAG_TXIS    Transmit interrupt status

-  *            @arg @ref I2C_FLAG_RXNE    Receive data register not empty

-  *            @arg @ref I2C_FLAG_ADDR    Address matched (slave mode)

-  *            @arg @ref I2C_FLAG_AF      Acknowledge failure received flag

-  *            @arg @ref I2C_FLAG_STOPF   STOP detection flag

-  *            @arg @ref I2C_FLAG_TC      Transfer complete (master mode)

-  *            @arg @ref I2C_FLAG_TCR     Transfer complete reload

-  *            @arg @ref I2C_FLAG_BERR    Bus error

-  *            @arg @ref I2C_FLAG_ARLO    Arbitration lost

-  *            @arg @ref I2C_FLAG_OVR     Overrun/Underrun

-  *            @arg @ref I2C_FLAG_PECERR  PEC error in reception

-  *            @arg @ref I2C_FLAG_TIMEOUT Timeout or Tlow detection flag

-  *            @arg @ref I2C_FLAG_ALERT   SMBus alert

-  *            @arg @ref I2C_FLAG_BUSY    Bus busy

-  *            @arg @ref I2C_FLAG_DIR     Transfer direction (slave mode)

-  *

-  * @retval The new state of __FLAG__ (SET or RESET).

-  */

-#define I2C_FLAG_MASK  (0x0001FFFFU)

-#define __HAL_I2C_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) == (__FLAG__)) ? SET : RESET)

-

-/** @brief  Clear the I2C pending flags which are cleared by writing 1 in a specific bit.

-  * @param  __HANDLE__ specifies the I2C Handle.

-  * @param  __FLAG__ specifies the flag to clear.

-  *          This parameter can be any combination of the following values:

-  *            @arg @ref I2C_FLAG_TXE     Transmit data register empty

-  *            @arg @ref I2C_FLAG_ADDR    Address matched (slave mode)

-  *            @arg @ref I2C_FLAG_AF      Acknowledge failure received flag

-  *            @arg @ref I2C_FLAG_STOPF   STOP detection flag

-  *            @arg @ref I2C_FLAG_BERR    Bus error

-  *            @arg @ref I2C_FLAG_ARLO    Arbitration lost

-  *            @arg @ref I2C_FLAG_OVR     Overrun/Underrun

-  *            @arg @ref I2C_FLAG_PECERR  PEC error in reception

-  *            @arg @ref I2C_FLAG_TIMEOUT Timeout or Tlow detection flag

-  *            @arg @ref I2C_FLAG_ALERT   SMBus alert

-  *

-  * @retval None

-  */

-#define __HAL_I2C_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__FLAG__) == I2C_FLAG_TXE) ? ((__HANDLE__)->Instance->ISR |= (__FLAG__)) \

-                                                                                 : ((__HANDLE__)->Instance->ICR = (__FLAG__)))

-

-/** @brief  Enable the specified I2C peripheral.

-  * @param  __HANDLE__ specifies the I2C Handle.

-  * @retval None

-  */

-#define __HAL_I2C_ENABLE(__HANDLE__)                            (SET_BIT((__HANDLE__)->Instance->CR1,  I2C_CR1_PE))

-

-/** @brief  Disable the specified I2C peripheral.

-  * @param  __HANDLE__ specifies the I2C Handle.

-  * @retval None

-  */

-#define __HAL_I2C_DISABLE(__HANDLE__)                           (CLEAR_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE))

-

-/** @brief  Generate a Non-Acknowledge I2C peripheral in Slave mode.

-  * @param  __HANDLE__ specifies the I2C Handle.

-  * @retval None

-  */

-#define __HAL_I2C_GENERATE_NACK(__HANDLE__)                     (SET_BIT((__HANDLE__)->Instance->CR2, I2C_CR2_NACK))

-/**

-  * @}

-  */

-

-/* Include I2C HAL Extended module */

-#include "stm32f0xx_hal_i2c_ex.h"

-

-/* Exported functions --------------------------------------------------------*/

-/** @addtogroup I2C_Exported_Functions

-  * @{

-  */

-

-/** @addtogroup I2C_Exported_Functions_Group1 Initialization and de-initialization functions

-  * @{

-  */

-/* Initialization and de-initialization functions******************************/

-HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c);

-HAL_StatusTypeDef HAL_I2C_DeInit(I2C_HandleTypeDef *hi2c);

-void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c);

-void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c);

-

-/* Callbacks Register/UnRegister functions  ***********************************/

-#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)

-HAL_StatusTypeDef HAL_I2C_RegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID, pI2C_CallbackTypeDef pCallback);

-HAL_StatusTypeDef HAL_I2C_UnRegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID);

-

-HAL_StatusTypeDef HAL_I2C_RegisterAddrCallback(I2C_HandleTypeDef *hi2c, pI2C_AddrCallbackTypeDef pCallback);

-HAL_StatusTypeDef HAL_I2C_UnRegisterAddrCallback(I2C_HandleTypeDef *hi2c);

-#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */

-/**

-  * @}

-  */

-

-/** @addtogroup I2C_Exported_Functions_Group2 Input and Output operation functions

-  * @{

-  */

-/* IO operation functions  ****************************************************/

-/******* Blocking mode: Polling */

-HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout);

-HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout);

-HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout);

-HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout);

-HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout);

-HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout);

-HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout);

-

-/******* Non-Blocking mode: Interrupt */

-HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);

-HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);

-HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);

-HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);

-HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);

-HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);

-

-HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);

-HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);

-HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions);

-HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions);

-HAL_StatusTypeDef HAL_I2C_EnableListen_IT(I2C_HandleTypeDef *hi2c);

-HAL_StatusTypeDef HAL_I2C_DisableListen_IT(I2C_HandleTypeDef *hi2c);

-HAL_StatusTypeDef HAL_I2C_Master_Abort_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress);

-

-/******* Non-Blocking mode: DMA */

-HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);

-HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);

-HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);

-HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);

-HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);

-HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);

-

-HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);

-HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);

-HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions);

-HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions);

-/**

-  * @}

-  */

-

-/** @addtogroup I2C_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks

- * @{

- */

-/******* I2C IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */

-void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c);

-void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c);

-void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c);

-void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c);

-void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c);

-void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c);

-void HAL_I2C_AddrCallback(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode);

-void HAL_I2C_ListenCpltCallback(I2C_HandleTypeDef *hi2c);

-void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c);

-void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c);

-void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c);

-void HAL_I2C_AbortCpltCallback(I2C_HandleTypeDef *hi2c);

-/**

-  * @}

-  */

-

-/** @addtogroup I2C_Exported_Functions_Group3 Peripheral State, Mode and Error functions

-  * @{

-  */

-/* Peripheral State, Mode and Error functions  *********************************/

-HAL_I2C_StateTypeDef HAL_I2C_GetState(I2C_HandleTypeDef *hi2c);

-HAL_I2C_ModeTypeDef  HAL_I2C_GetMode(I2C_HandleTypeDef *hi2c);

-uint32_t             HAL_I2C_GetError(I2C_HandleTypeDef *hi2c);

-

-/**

-  * @}

-  */

-

-/**

-  * @}

-  */

-

-/* Private constants ---------------------------------------------------------*/

-/** @defgroup I2C_Private_Constants I2C Private Constants

-  * @{

-  */

-

-/**

-  * @}

-  */

-

-/* Private macros ------------------------------------------------------------*/

-/** @defgroup I2C_Private_Macro I2C Private Macros

-  * @{

-  */

-

-#define IS_I2C_ADDRESSING_MODE(MODE)    (((MODE) == I2C_ADDRESSINGMODE_7BIT) || \

-                                         ((MODE) == I2C_ADDRESSINGMODE_10BIT))

-

-#define IS_I2C_DUAL_ADDRESS(ADDRESS)    (((ADDRESS) == I2C_DUALADDRESS_DISABLE) || \

-                                         ((ADDRESS) == I2C_DUALADDRESS_ENABLE))

-

-#define IS_I2C_OWN_ADDRESS2_MASK(MASK)  (((MASK) == I2C_OA2_NOMASK)  || \

-                                         ((MASK) == I2C_OA2_MASK01) || \

-                                         ((MASK) == I2C_OA2_MASK02) || \

-                                         ((MASK) == I2C_OA2_MASK03) || \

-                                         ((MASK) == I2C_OA2_MASK04) || \

-                                         ((MASK) == I2C_OA2_MASK05) || \

-                                         ((MASK) == I2C_OA2_MASK06) || \

-                                         ((MASK) == I2C_OA2_MASK07))

-

-#define IS_I2C_GENERAL_CALL(CALL)       (((CALL) == I2C_GENERALCALL_DISABLE) || \

-                                         ((CALL) == I2C_GENERALCALL_ENABLE))

-

-#define IS_I2C_NO_STRETCH(STRETCH)      (((STRETCH) == I2C_NOSTRETCH_DISABLE) || \

-                                         ((STRETCH) == I2C_NOSTRETCH_ENABLE))

-

-#define IS_I2C_MEMADD_SIZE(SIZE)        (((SIZE) == I2C_MEMADD_SIZE_8BIT) || \

-                                         ((SIZE) == I2C_MEMADD_SIZE_16BIT))

-

-#define IS_TRANSFER_MODE(MODE)          (((MODE) == I2C_RELOAD_MODE)   || \

-                                         ((MODE) == I2C_AUTOEND_MODE) || \

-                                         ((MODE) == I2C_SOFTEND_MODE))

-

-#define IS_TRANSFER_REQUEST(REQUEST)    (((REQUEST) == I2C_GENERATE_STOP)        || \

-                                         ((REQUEST) == I2C_GENERATE_START_READ)  || \

-                                         ((REQUEST) == I2C_GENERATE_START_WRITE) || \

-                                         ((REQUEST) == I2C_NO_STARTSTOP))

-

-#define IS_I2C_TRANSFER_OPTIONS_REQUEST(REQUEST)  (((REQUEST) == I2C_FIRST_FRAME)          || \

-                                                   ((REQUEST) == I2C_FIRST_AND_NEXT_FRAME) || \

-                                                   ((REQUEST) == I2C_NEXT_FRAME)           || \

-                                                   ((REQUEST) == I2C_FIRST_AND_LAST_FRAME) || \

-                                                   ((REQUEST) == I2C_LAST_FRAME)           || \

-                                                   ((REQUEST) == I2C_LAST_FRAME_NO_STOP)   || \

-                                                   IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST))

-

-#define IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == I2C_OTHER_FRAME)     || \

-                                                        ((REQUEST) == I2C_OTHER_AND_LAST_FRAME))

-

-#define I2C_RESET_CR2(__HANDLE__)                 ((__HANDLE__)->Instance->CR2 &= (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_HEAD10R | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_RD_WRN)))

-

-#define I2C_GET_ADDR_MATCH(__HANDLE__)            ((uint16_t)(((__HANDLE__)->Instance->ISR & I2C_ISR_ADDCODE) >> 16U))

-#define I2C_GET_DIR(__HANDLE__)                   ((uint8_t)(((__HANDLE__)->Instance->ISR & I2C_ISR_DIR) >> 16U))

-#define I2C_GET_STOP_MODE(__HANDLE__)             ((__HANDLE__)->Instance->CR2 & I2C_CR2_AUTOEND)

-#define I2C_GET_OWN_ADDRESS1(__HANDLE__)          ((uint16_t)((__HANDLE__)->Instance->OAR1 & I2C_OAR1_OA1))

-#define I2C_GET_OWN_ADDRESS2(__HANDLE__)          ((uint16_t)((__HANDLE__)->Instance->OAR2 & I2C_OAR2_OA2))

-

-#define IS_I2C_OWN_ADDRESS1(ADDRESS1)             ((ADDRESS1) <= 0x000003FFU)

-#define IS_I2C_OWN_ADDRESS2(ADDRESS2)             ((ADDRESS2) <= (uint16_t)0x00FFU)

-

-#define I2C_MEM_ADD_MSB(__ADDRESS__)              ((uint8_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)(0xFF00U))) >> 8U)))

-#define I2C_MEM_ADD_LSB(__ADDRESS__)              ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)(0x00FFU))))

-

-#define I2C_GENERATE_START(__ADDMODE__,__ADDRESS__) (((__ADDMODE__) == I2C_ADDRESSINGMODE_7BIT) ? (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | (I2C_CR2_START) | (I2C_CR2_AUTOEND)) & (~I2C_CR2_RD_WRN)) : \

-                                                          (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | (I2C_CR2_ADD10) | (I2C_CR2_START)) & (~I2C_CR2_RD_WRN)))

-

-#define I2C_CHECK_FLAG(__ISR__, __FLAG__)         ((((__ISR__) & ((__FLAG__) & I2C_FLAG_MASK)) == ((__FLAG__) & I2C_FLAG_MASK)) ? SET : RESET)

-#define I2C_CHECK_IT_SOURCE(__CR1__, __IT__)      ((((__CR1__) & (__IT__)) == (__IT__)) ? SET : RESET)

-/**

-  * @}

-  */

-

-/* Private Functions ---------------------------------------------------------*/

-/** @defgroup I2C_Private_Functions I2C Private Functions

-  * @{

-  */

-/* Private functions are defined in stm32f0xx_hal_i2c.c file */

-/**

-  * @}

-  */

-

-/**

-  * @}

-  */

-

-/**

-  * @}

-  */

-

-#ifdef __cplusplus

-}

-#endif

-

-

-#endif /* STM32F0xx_HAL_I2C_H */

-

-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/