minkbd: repo restructure

1 files changed, 0 insertions, 296 deletions

diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h
deleted file mode 100644
index fa58dd9..0000000
--- a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_gpio.h
+++ /dev/null
@@ -1,296 +0,0 @@
-/**

-  ******************************************************************************

-  * @file    stm32f0xx_hal_gpio.h

-  * @author  MCD Application Team

-  * @brief   Header file of GPIO HAL module.

-  ******************************************************************************

-  * @attention

-  *

-  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.

-  * All rights reserved.</center></h2>

-  *

-  * This software component is licensed by ST under BSD 3-Clause license,

-  * the "License"; You may not use this file except in compliance with the

-  * License. You may obtain a copy of the License at:

-  *                        opensource.org/licenses/BSD-3-Clause

-  *

-  ******************************************************************************

-  */

-

-/* Define to prevent recursive inclusion -------------------------------------*/

-#ifndef __STM32F0xx_HAL_GPIO_H

-#define __STM32F0xx_HAL_GPIO_H

-

-#ifdef __cplusplus

- extern "C" {

-#endif

-

-/* Includes ------------------------------------------------------------------*/

-#include "stm32f0xx_hal_def.h"

-

-/** @addtogroup STM32F0xx_HAL_Driver

-  * @{

-  */

-

-/** @addtogroup GPIO

-  * @{

-  */ 

-

-/* Exported types ------------------------------------------------------------*/ 

-

-/** @defgroup GPIO_Exported_Types GPIO Exported Types

-  * @{

-  */

-/** 

-  * @brief   GPIO Init structure definition  

-  */

-typedef struct

-{

-  uint32_t Pin;       /*!< Specifies the GPIO pins to be configured.

-                           This parameter can be any value of @ref GPIO_pins */

-

-  uint32_t Mode;      /*!< Specifies the operating mode for the selected pins.

-                           This parameter can be a value of @ref GPIO_mode */

-

-  uint32_t Pull;      /*!< Specifies the Pull-up or Pull-Down activation for the selected pins.

-                           This parameter can be a value of @ref GPIO_pull */

-

-  uint32_t Speed;     /*!< Specifies the speed for the selected pins.

-                           This parameter can be a value of @ref GPIO_speed */

-

-  uint32_t Alternate;  /*!< Peripheral to be connected to the selected pins 

-                            This parameter can be a value of @ref GPIOEx_Alternate_function_selection */

-}GPIO_InitTypeDef;

-

-/** 

-  * @brief  GPIO Bit SET and Bit RESET enumeration 

-  */

-typedef enum

-{

-  GPIO_PIN_RESET = 0U,

-  GPIO_PIN_SET

-}GPIO_PinState;

-/**

-  * @}

-  */

-  

-/* Exported constants --------------------------------------------------------*/

-/** @defgroup GPIO_Exported_Constants GPIO Exported Constants

-  * @{

-  */

-/** @defgroup GPIO_pins GPIO pins

-  * @{

-  */

-#define GPIO_PIN_0                 ((uint16_t)0x0001U)  /* Pin 0 selected    */

-#define GPIO_PIN_1                 ((uint16_t)0x0002U)  /* Pin 1 selected    */

-#define GPIO_PIN_2                 ((uint16_t)0x0004U)  /* Pin 2 selected    */

-#define GPIO_PIN_3                 ((uint16_t)0x0008U)  /* Pin 3 selected    */

-#define GPIO_PIN_4                 ((uint16_t)0x0010U)  /* Pin 4 selected    */

-#define GPIO_PIN_5                 ((uint16_t)0x0020U)  /* Pin 5 selected    */

-#define GPIO_PIN_6                 ((uint16_t)0x0040U)  /* Pin 6 selected    */

-#define GPIO_PIN_7                 ((uint16_t)0x0080U)  /* Pin 7 selected    */

-#define GPIO_PIN_8                 ((uint16_t)0x0100U)  /* Pin 8 selected    */

-#define GPIO_PIN_9                 ((uint16_t)0x0200U)  /* Pin 9 selected    */

-#define GPIO_PIN_10                ((uint16_t)0x0400U)  /* Pin 10 selected   */

-#define GPIO_PIN_11                ((uint16_t)0x0800U)  /* Pin 11 selected   */

-#define GPIO_PIN_12                ((uint16_t)0x1000U)  /* Pin 12 selected   */

-#define GPIO_PIN_13                ((uint16_t)0x2000U)  /* Pin 13 selected   */

-#define GPIO_PIN_14                ((uint16_t)0x4000U)  /* Pin 14 selected   */

-#define GPIO_PIN_15                ((uint16_t)0x8000U)  /* Pin 15 selected   */

-#define GPIO_PIN_All               ((uint16_t)0xFFFFU)  /* All pins selected */

-

-#define GPIO_PIN_MASK              (0x0000FFFFU) /* PIN mask for assert test */

-/**

-  * @}

-  */

-

-/** @defgroup GPIO_mode GPIO mode

-  * @brief GPIO Configuration Mode 

-  *        Elements values convention: 0xX0yz00YZ

-  *           - X  : GPIO mode or EXTI Mode

-  *           - y  : External IT or Event trigger detection 

-  *           - z  : IO configuration on External IT or Event

-  *           - Y  : Output type (Push Pull or Open Drain)

-  *           - Z  : IO Direction mode (Input, Output, Alternate or Analog)

-  * @{

-  */ 

-#define  GPIO_MODE_INPUT                        (0x00000000U)   /*!< Input Floating Mode                   */

-#define  GPIO_MODE_OUTPUT_PP                    (0x00000001U)   /*!< Output Push Pull Mode                 */

-#define  GPIO_MODE_OUTPUT_OD                    (0x00000011U)   /*!< Output Open Drain Mode                */

-#define  GPIO_MODE_AF_PP                        (0x00000002U)   /*!< Alternate Function Push Pull Mode     */

-#define  GPIO_MODE_AF_OD                        (0x00000012U)   /*!< Alternate Function Open Drain Mode    */

-#define  GPIO_MODE_ANALOG                       (0x00000003U)   /*!< Analog Mode  */  

-#define  GPIO_MODE_IT_RISING                    (0x10110000U)   /*!< External Interrupt Mode with Rising edge trigger detection          */

-#define  GPIO_MODE_IT_FALLING                   (0x10210000U)   /*!< External Interrupt Mode with Falling edge trigger detection         */

-#define  GPIO_MODE_IT_RISING_FALLING            (0x10310000U)   /*!< External Interrupt Mode with Rising/Falling edge trigger detection  */

-#define  GPIO_MODE_EVT_RISING                   (0x10120000U)   /*!< External Event Mode with Rising edge trigger detection               */

-#define  GPIO_MODE_EVT_FALLING                  (0x10220000U)   /*!< External Event Mode with Falling edge trigger detection              */

-#define  GPIO_MODE_EVT_RISING_FALLING           (0x10320000U)   /*!< External Event Mode with Rising/Falling edge trigger detection       */

-/**

-  * @}

-  */

-                                                         

-/** @defgroup GPIO_speed GPIO speed

-  * @brief GPIO Output Maximum frequency

-  * @{

-  */  

-#define  GPIO_SPEED_FREQ_LOW      (0x00000000U)  /*!< range up to 2 MHz, please refer to the product datasheet */

-#define  GPIO_SPEED_FREQ_MEDIUM   (0x00000001U)  /*!< range  4 MHz to 10 MHz, please refer to the product datasheet */

-#define  GPIO_SPEED_FREQ_HIGH     (0x00000003U)  /*!< range 10 MHz to 50 MHz, please refer to the product datasheet */

-/**

-  * @}

-  */

-

- /** @defgroup GPIO_pull GPIO pull

-   * @brief GPIO Pull-Up or Pull-Down Activation

-   * @{

-   */  

-#define  GPIO_NOPULL        (0x00000000U)   /*!< No Pull-up or Pull-down activation  */

-#define  GPIO_PULLUP        (0x00000001U)   /*!< Pull-up activation                  */

-#define  GPIO_PULLDOWN      (0x00000002U)   /*!< Pull-down activation                */

-/**

-  * @}

-  */

-

-/**

-  * @}

-  */

-

-/* Exported macro ------------------------------------------------------------*/

-/** @defgroup GPIO_Exported_Macros GPIO Exported Macros

-  * @{

-  */

-  

-/**

-  * @brief  Check whether the specified EXTI line flag is set or not.

-  * @param  __EXTI_LINE__ specifies the EXTI line flag to check.

-  *         This parameter can be GPIO_PIN_x where x can be(0..15)

-  * @retval The new state of __EXTI_LINE__ (SET or RESET).

-  */

-#define __HAL_GPIO_EXTI_GET_FLAG(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))

-

-/**

-  * @brief  Clear the EXTI's line pending flags.

-  * @param  __EXTI_LINE__ specifies the EXTI lines flags to clear.

-  *         This parameter can be any combination of GPIO_PIN_x where x can be (0..15)

-  * @retval None

-  */

-#define __HAL_GPIO_EXTI_CLEAR_FLAG(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))

-

-/**

-  * @brief  Check whether the specified EXTI line is asserted or not.

-  * @param  __EXTI_LINE__ specifies the EXTI line to check.

-  *          This parameter can be GPIO_PIN_x where x can be(0..15)

-  * @retval The new state of __EXTI_LINE__ (SET or RESET).

-  */

-#define __HAL_GPIO_EXTI_GET_IT(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))

-

-/**

-  * @brief  Clear the EXTI's line pending bits.

-  * @param  __EXTI_LINE__ specifies the EXTI lines to clear.

-  *          This parameter can be any combination of GPIO_PIN_x where x can be (0..15)

-  * @retval None

-  */

-#define __HAL_GPIO_EXTI_CLEAR_IT(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))

-

-/**

-  * @brief  Generate a Software interrupt on selected EXTI line.

-  * @param  __EXTI_LINE__ specifies the EXTI line to check.

-  *          This parameter can be GPIO_PIN_x where x can be(0..15)

-  * @retval None

-  */

-#define __HAL_GPIO_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER |= (__EXTI_LINE__))

-

-/**

-  * @}

-  */

-

-/* Private macros ------------------------------------------------------------*/

-/** @addtogroup GPIO_Private_Macros GPIO Private Macros

-  * @{

-  */

-#define IS_GPIO_PIN_ACTION(ACTION)  (((ACTION) == GPIO_PIN_RESET) || ((ACTION) == GPIO_PIN_SET))

-

-#define IS_GPIO_PIN(__PIN__)        (((((uint32_t)__PIN__) & GPIO_PIN_MASK) != 0x00U) &&\

-                                     ((((uint32_t)__PIN__) & ~GPIO_PIN_MASK) == 0x00U))

-

-#define IS_GPIO_MODE(__MODE__)      (((__MODE__) == GPIO_MODE_INPUT)              ||\

-                                     ((__MODE__) == GPIO_MODE_OUTPUT_PP)          ||\

-                                     ((__MODE__) == GPIO_MODE_OUTPUT_OD)          ||\

-                                     ((__MODE__) == GPIO_MODE_AF_PP)              ||\

-                                     ((__MODE__) == GPIO_MODE_AF_OD)              ||\

-                                     ((__MODE__) == GPIO_MODE_IT_RISING)          ||\

-                                     ((__MODE__) == GPIO_MODE_IT_FALLING)         ||\

-                                     ((__MODE__) == GPIO_MODE_IT_RISING_FALLING)  ||\

-                                     ((__MODE__) == GPIO_MODE_EVT_RISING)         ||\

-                                     ((__MODE__) == GPIO_MODE_EVT_FALLING)        ||\

-                                     ((__MODE__) == GPIO_MODE_EVT_RISING_FALLING) ||\

-                                     ((__MODE__) == GPIO_MODE_ANALOG))

-

-#define IS_GPIO_SPEED(__SPEED__)    (((__SPEED__) == GPIO_SPEED_FREQ_LOW)    ||\

-                                     ((__SPEED__) == GPIO_SPEED_FREQ_MEDIUM) ||\

-                                     ((__SPEED__) == GPIO_SPEED_FREQ_HIGH))

-

-#define IS_GPIO_PULL(__PULL__)      (((__PULL__) == GPIO_NOPULL)   ||\

-                                     ((__PULL__) == GPIO_PULLUP)   || \

-                                     ((__PULL__) == GPIO_PULLDOWN))

-/**

-  * @}

-  */

-

-/* Include GPIO HAL Extended module */

-#include "stm32f0xx_hal_gpio_ex.h"

-

-/* Exported functions --------------------------------------------------------*/ 

-/** @addtogroup GPIO_Exported_Functions GPIO Exported Functions

-  * @{

-  */

-

-/** @addtogroup GPIO_Exported_Functions_Group1 Initialization/de-initialization functions 

- *  @brief    Initialization and Configuration functions

- * @{

- */

-     

-/* Initialization and de-initialization functions *****************************/

-void              HAL_GPIO_Init(GPIO_TypeDef  *GPIOx, GPIO_InitTypeDef *GPIO_Init);

-void              HAL_GPIO_DeInit(GPIO_TypeDef  *GPIOx, uint32_t GPIO_Pin);

-

-/**

-  * @}

-  */

-

-/** @addtogroup GPIO_Exported_Functions_Group2 IO operation functions 

- * @{

- */

-   

-/* IO operation functions *****************************************************/

-GPIO_PinState     HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);

-void              HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState);

-void              HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);

-HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);

-void              HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin);

-void              HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin);

-

-/**

-  * @}

-  */ 

-

-/**

-  * @}

-  */ 

-

-/**

-  * @}

-  */ 

-

-/**

-  * @}

-  */  

-  

-#ifdef __cplusplus

-}

-#endif

-

-#endif /* __STM32F0xx_HAL_GPIO_H */

-

-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/