minkbd: repo restructure

1 files changed, 0 insertions, 321 deletions

diff --git a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_conf_template.h b/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_conf_template.h
deleted file mode 100644
index f1b1648..0000000
--- a/Blink/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_conf_template.h
+++ /dev/null
@@ -1,321 +0,0 @@
-/**

-  ******************************************************************************

-  * @file    stm32f0xx_hal_conf.h

-  * @author  MCD Application Team

-  * @brief   HAL configuration file.

-  ******************************************************************************

-  * @attention

-  *

-  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.

-  * All rights reserved.</center></h2>

-  *

-  * This software component is licensed by ST under BSD 3-Clause license,

-  * the "License"; You may not use this file except in compliance with the

-  * License. You may obtain a copy of the License at:

-  *                        opensource.org/licenses/BSD-3-Clause

-  *

-  ******************************************************************************

-  */

-

-/* Define to prevent recursive inclusion -------------------------------------*/

-#ifndef __STM32F0xx_HAL_CONF_H

-#define __STM32F0xx_HAL_CONF_H

-

-#ifdef __cplusplus

- extern "C" {

-#endif

-

-/* Exported types ------------------------------------------------------------*/

-/* Exported constants --------------------------------------------------------*/

-

-/* ########################## Module Selection ############################## */

-/**

-  * @brief This is the list of modules to be used in the HAL driver 

-  */

-#define HAL_MODULE_ENABLED

-#define HAL_ADC_MODULE_ENABLED

-#define HAL_CAN_MODULE_ENABLED

-#define HAL_CEC_MODULE_ENABLED

-#define HAL_COMP_MODULE_ENABLED

-#define HAL_CORTEX_MODULE_ENABLED

-#define HAL_CRC_MODULE_ENABLED

-#define HAL_DAC_MODULE_ENABLED

-#define HAL_DMA_MODULE_ENABLED

-#define HAL_FLASH_MODULE_ENABLED

-#define HAL_GPIO_MODULE_ENABLED

-#define HAL_EXTI_MODULE_ENABLED

-#define HAL_I2C_MODULE_ENABLED

-#define HAL_I2S_MODULE_ENABLED

-#define HAL_IRDA_MODULE_ENABLED

-#define HAL_IWDG_MODULE_ENABLED

-#define HAL_PCD_MODULE_ENABLED

-#define HAL_PWR_MODULE_ENABLED

-#define HAL_RCC_MODULE_ENABLED

-#define HAL_RTC_MODULE_ENABLED

-#define HAL_SMARTCARD_MODULE_ENABLED

-#define HAL_SMBUS_MODULE_ENABLED

-#define HAL_SPI_MODULE_ENABLED

-#define HAL_TIM_MODULE_ENABLED

-#define HAL_TSC_MODULE_ENABLED

-#define HAL_UART_MODULE_ENABLED

-#define HAL_USART_MODULE_ENABLED

-#define HAL_WWDG_MODULE_ENABLED

-

-/* ######################### Oscillator Values adaptation ################### */

-/**

-  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.

-  *        This value is used by the RCC HAL module to compute the system frequency

-  *        (when HSE is used as system clock source, directly or through the PLL).  

-  */

-#if !defined  (HSE_VALUE) 

-  #define HSE_VALUE            8000000U  /*!< Value of the External oscillator in Hz */

-#endif /* HSE_VALUE */

-

-/**

-  * @brief In the following line adjust the External High Speed oscillator (HSE) Startup 

-  *        Timeout value 

-  */

-#if !defined  (HSE_STARTUP_TIMEOUT)

-  #define HSE_STARTUP_TIMEOUT  100U      /*!< Time out for HSE start up, in ms */

-#endif /* HSE_STARTUP_TIMEOUT */

-

-/**

-  * @brief Internal High Speed oscillator (HSI) value.

-  *        This value is used by the RCC HAL module to compute the system frequency

-  *        (when HSI is used as system clock source, directly or through the PLL). 

-  */

-#if !defined  (HSI_VALUE)

-  #define HSI_VALUE            8000000U  /*!< Value of the Internal oscillator in Hz*/

-#endif /* HSI_VALUE */

-

-/**

-  * @brief In the following line adjust the Internal High Speed oscillator (HSI) Startup 

-  *        Timeout value 

-  */

-#if !defined  (HSI_STARTUP_TIMEOUT) 

-  #define HSI_STARTUP_TIMEOUT  5000U     /*!< Time out for HSI start up */

-#endif /* HSI_STARTUP_TIMEOUT */  

-

-/**

-  * @brief Internal High Speed oscillator for ADC (HSI14) value.

-  */

-#if !defined  (HSI14_VALUE) 

-  #define HSI14_VALUE          14000000U /*!< Value of the Internal High Speed oscillator for ADC in Hz.

-                                             The real value may vary depending on the variations

-                                             in voltage and temperature.  */

-#endif /* HSI14_VALUE */

-

-/**

-  * @brief Internal High Speed oscillator for USB (HSI48) value.

-  */

-#if !defined  (HSI48_VALUE) 

-  #define HSI48_VALUE          48000000U /*!< Value of the Internal High Speed oscillator for USB in Hz.

-                                             The real value may vary depending on the variations

-                                             in voltage and temperature.  */

-#endif /* HSI48_VALUE */

-

-/**

-  * @brief Internal Low Speed oscillator (LSI) value.

-  */

-#if !defined  (LSI_VALUE) 

-  #define LSI_VALUE            32000U    

-#endif /* LSI_VALUE */                   /*!< Value of the Internal Low Speed oscillator in Hz

-                                             The real value may vary depending on the variations

-                                             in voltage and temperature.  */

-/**

-  * @brief External Low Speed oscillator (LSE) value.

-  */

-#if !defined  (LSE_VALUE)

-  #define LSE_VALUE            32768U    /*!< Value of the External Low Speed oscillator in Hz */

-#endif /* LSE_VALUE */

-

-/**

-  * @brief Time out for LSE start up value in ms.

-  */

-#if !defined  (LSE_STARTUP_TIMEOUT)

-  #define LSE_STARTUP_TIMEOUT  5000U     /*!< Time out for LSE start up, in ms */

-#endif /* LSE_STARTUP_TIMEOUT */

-

-

-/* Tip: To avoid modifying this file each time you need to use different HSE,

-   ===  you can define the HSE value in your toolchain compiler preprocessor. */

-

-/* ########################### System Configuration ######################### */

-/**

-  * @brief This is the HAL system configuration section

-  */     

-#define  VDD_VALUE                    3300U  /*!< Value of VDD in mv */           

-#define  TICK_INT_PRIORITY            ((uint32_t)(1U<<__NVIC_PRIO_BITS) - 1U) /*!< tick interrupt priority (lowest by default)             */

-                                                                              /*  Warning: Must be set to higher priority for HAL_Delay()  */

-                                                                              /*  and HAL_GetTick() usage under interrupt context          */

-#define  USE_RTOS                     0U

-#define  PREFETCH_ENABLE              1U

-#define  INSTRUCTION_CACHE_ENABLE     0U

-#define  DATA_CACHE_ENABLE            0U

-#define  USE_SPI_CRC                  1U

-

-#define  USE_HAL_ADC_REGISTER_CALLBACKS         0U /* ADC register callback disabled       */

-#define  USE_HAL_CAN_REGISTER_CALLBACKS         0U /* CAN register callback disabled       */

-#define  USE_HAL_COMP_REGISTER_CALLBACKS        0U /* COMP register callback disabled      */

-#define  USE_HAL_CEC_REGISTER_CALLBACKS         0U /* CEC register callback disabled       */

-#define  USE_HAL_DAC_REGISTER_CALLBACKS         0U /* DAC register callback disabled       */

-#define  USE_HAL_I2C_REGISTER_CALLBACKS         0U /* I2C register callback disabled       */

-#define  USE_HAL_SMBUS_REGISTER_CALLBACKS       0U /* SMBUS register callback disabled     */

-#define  USE_HAL_UART_REGISTER_CALLBACKS        0U /* UART register callback disabled      */

-#define  USE_HAL_USART_REGISTER_CALLBACKS       0U /* USART register callback disabled     */

-#define  USE_HAL_IRDA_REGISTER_CALLBACKS        0U /* IRDA register callback disabled      */

-#define  USE_HAL_SMARTCARD_REGISTER_CALLBACKS   0U /* SMARTCARD register callback disabled */

-#define  USE_HAL_WWDG_REGISTER_CALLBACKS        0U /* WWDG register callback disabled      */

-#define  USE_HAL_RTC_REGISTER_CALLBACKS         0U /* RTC register callback disabled       */

-#define  USE_HAL_SPI_REGISTER_CALLBACKS         0U /* SPI register callback disabled       */

-#define  USE_HAL_I2S_REGISTER_CALLBACKS         0U /* I2S register callback disabled       */

-#define  USE_HAL_TIM_REGISTER_CALLBACKS         0U /* TIM register callback disabled       */

-#define  USE_HAL_TSC_REGISTER_CALLBACKS         0U /* TSC register callback disabled       */

-#define  USE_HAL_PCD_REGISTER_CALLBACKS         0U /* PCD register callback disabled       */

-

-/* ########################## Assert Selection ############################## */

-/**

-  * @brief Uncomment the line below to expanse the "assert_param" macro in the 

-  *        HAL drivers code

-  */

-/*#define USE_FULL_ASSERT    1*/

-

-/* Includes ------------------------------------------------------------------*/

-/**

-  * @brief Include module's header file 

-  */

-

-#ifdef HAL_RCC_MODULE_ENABLED

- #include "stm32f0xx_hal_rcc.h"

-#endif /* HAL_RCC_MODULE_ENABLED */

-

-#ifdef HAL_GPIO_MODULE_ENABLED

- #include "stm32f0xx_hal_gpio.h"

-#endif /* HAL_GPIO_MODULE_ENABLED */

-

-#ifdef HAL_EXTI_MODULE_ENABLED

-  #include "stm32f0xx_hal_exti.h"

-#endif /* HAL_EXTI_MODULE_ENABLED */

-

-#ifdef HAL_DMA_MODULE_ENABLED

-  #include "stm32f0xx_hal_dma.h"

-#endif /* HAL_DMA_MODULE_ENABLED */

-

-#ifdef HAL_CORTEX_MODULE_ENABLED

- #include "stm32f0xx_hal_cortex.h"

-#endif /* HAL_CORTEX_MODULE_ENABLED */

-

-#ifdef HAL_ADC_MODULE_ENABLED

- #include "stm32f0xx_hal_adc.h"

-#endif /* HAL_ADC_MODULE_ENABLED */

-

-#ifdef HAL_CAN_MODULE_ENABLED

- #include "stm32f0xx_hal_can.h"

-#endif /* HAL_CAN_MODULE_ENABLED */

-

-#ifdef HAL_CEC_MODULE_ENABLED

- #include "stm32f0xx_hal_cec.h"

-#endif /* HAL_CEC_MODULE_ENABLED */

-

-#ifdef HAL_COMP_MODULE_ENABLED

- #include "stm32f0xx_hal_comp.h"

-#endif /* HAL_COMP_MODULE_ENABLED */

-

-#ifdef HAL_CRC_MODULE_ENABLED

- #include "stm32f0xx_hal_crc.h"

-#endif /* HAL_CRC_MODULE_ENABLED */

-

-#ifdef HAL_DAC_MODULE_ENABLED

- #include "stm32f0xx_hal_dac.h"

-#endif /* HAL_DAC_MODULE_ENABLED */

-

-#ifdef HAL_FLASH_MODULE_ENABLED

- #include "stm32f0xx_hal_flash.h"

-#endif /* HAL_FLASH_MODULE_ENABLED */

-

-#ifdef HAL_I2C_MODULE_ENABLED

- #include "stm32f0xx_hal_i2c.h"

-#endif /* HAL_I2C_MODULE_ENABLED */

-

-#ifdef HAL_I2S_MODULE_ENABLED

- #include "stm32f0xx_hal_i2s.h"

-#endif /* HAL_I2S_MODULE_ENABLED */

-

-#ifdef HAL_IRDA_MODULE_ENABLED

- #include "stm32f0xx_hal_irda.h"

-#endif /* HAL_IRDA_MODULE_ENABLED */

-

-#ifdef HAL_IWDG_MODULE_ENABLED

- #include "stm32f0xx_hal_iwdg.h"

-#endif /* HAL_IWDG_MODULE_ENABLED */

-

-#ifdef HAL_PCD_MODULE_ENABLED

- #include "stm32f0xx_hal_pcd.h"

-#endif /* HAL_PCD_MODULE_ENABLED */

-

-#ifdef HAL_PWR_MODULE_ENABLED

- #include "stm32f0xx_hal_pwr.h"

-#endif /* HAL_PWR_MODULE_ENABLED */

-

-#ifdef HAL_RTC_MODULE_ENABLED

- #include "stm32f0xx_hal_rtc.h"

-#endif /* HAL_RTC_MODULE_ENABLED */

-

-#ifdef HAL_SMARTCARD_MODULE_ENABLED

- #include "stm32f0xx_hal_smartcard.h"

-#endif /* HAL_SMARTCARD_MODULE_ENABLED */

-

-#ifdef HAL_SMBUS_MODULE_ENABLED

- #include "stm32f0xx_hal_smbus.h"

-#endif /* HAL_SMBUS_MODULE_ENABLED */

-

-#ifdef HAL_SPI_MODULE_ENABLED

- #include "stm32f0xx_hal_spi.h"

-#endif /* HAL_SPI_MODULE_ENABLED */

-

-#ifdef HAL_TIM_MODULE_ENABLED

- #include "stm32f0xx_hal_tim.h"

-#endif /* HAL_TIM_MODULE_ENABLED */

-

-#ifdef HAL_TSC_MODULE_ENABLED

- #include "stm32f0xx_hal_tsc.h"

-#endif /* HAL_TSC_MODULE_ENABLED */

-

-#ifdef HAL_UART_MODULE_ENABLED

- #include "stm32f0xx_hal_uart.h"

-#endif /* HAL_UART_MODULE_ENABLED */

-

-#ifdef HAL_USART_MODULE_ENABLED

- #include "stm32f0xx_hal_usart.h"

-#endif /* HAL_USART_MODULE_ENABLED */

-

-#ifdef HAL_WWDG_MODULE_ENABLED

- #include "stm32f0xx_hal_wwdg.h"

-#endif /* HAL_WWDG_MODULE_ENABLED */

-

-/* Exported macro ------------------------------------------------------------*/

-#ifdef  USE_FULL_ASSERT

-/**

-  * @brief  The assert_param macro is used for function's parameters check.

-  * @param  expr If expr is false, it calls assert_failed function

-  *         which reports the name of the source file and the source

-  *         line number of the call that failed. 

-  *         If expr is true, it returns no value.

-  * @retval None

-  */

-  #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))

-/* Exported functions ------------------------------------------------------- */

-  void assert_failed(uint8_t* file, uint32_t line);

-#else

-  #define assert_param(expr) ((void)0U)

-#endif /* USE_FULL_ASSERT */    

-    

-#ifdef __cplusplus

-}

-#endif

-

-#endif /* __STM32F0xx_HAL_CONF_H */

-

-

-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

-