diff options
Diffstat (limited to 'firmware')
| -rw-r--r-- | firmware/main.c | 44 |
1 files changed, 22 insertions, 22 deletions
diff --git a/firmware/main.c b/firmware/main.c index fef3ad4..dfd5577 100644 --- a/firmware/main.c +++ b/firmware/main.c @@ -71,7 +71,7 @@ unsigned char framebuffer[BUS_COUNT*BUS_SIZE]; unsigned long framebuffer_read(void *data, unsigned long len);
/* Kick off DMA transfer from RAM to SPI interfaces */
void kickoff_transfers(void);
-void kickoff_transfer(unsigned int channel, unsigned int offset);
+void kickoff_transfer(unsigned int channel, unsigned int offset, int base);
void ssi_udma_channel_config(unsigned int channel);
unsigned char ucControlTable[1024] __attribute__ ((aligned(1024)));
@@ -157,7 +157,7 @@ unsigned long framebuffer_read(void *data, unsigned long len) { return len;
}
- // Mirror crate map for the display's right half
+ /* Mirror crate map for the display's right half */
if(bus >= BUS_COUNT/2)
fb->crate_x = CRATES_X - fb->crate_x - 1;
@@ -180,14 +180,14 @@ unsigned long framebuffer_read(void *data, unsigned long len) { }
void kickoff_transfers() {
- kickoff_transfer(11, 0);
-/* kickoff_transfer(25, 1);
- kickoff_transfer(13, 2);
- kickoff_transfer(15, 3); */
+ kickoff_transfer(11, 0, SSI0_BASE);
+ kickoff_transfer(25, 1, SSI1_BASE);
+ kickoff_transfer(13, 2, SSI2_BASE);
+ kickoff_transfer(15, 3, SSI3_BASE);
}
-void kickoff_transfer(unsigned int channel, unsigned int offset) {
- ROM_uDMAChannelTransferSet(channel | UDMA_PRI_SELECT, UDMA_MODE_BASIC, framebuffer+BUS_SIZE*offset, (void *)(SSI0_BASE + SSI_O_DR), BUS_SIZE);
+void kickoff_transfer(unsigned int channel, unsigned int offset, int base) {
+ ROM_uDMAChannelTransferSet(channel | UDMA_PRI_SELECT, UDMA_MODE_BASIC, framebuffer+BUS_SIZE*offset, (void *)(base + SSI_O_DR), BUS_SIZE);
ROM_uDMAChannelEnable(channel);
}
@@ -246,11 +246,11 @@ int main(void) { /* Configure SSI0..3 for the ws2801's SPI-like protocol */
ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_SSI0);
-/* ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_SSI1);
+ ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_SSI1);
ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_SSI2);
- ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_SSI3); */
+ ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_SSI3);
-/* ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOB);
+ ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOB);
GPIOPinConfigure(GPIO_PB4_SSI2CLK);
GPIOPinConfigure(GPIO_PB7_SSI2TX);
ROM_GPIOPinTypeSSI(GPIO_PORTB_BASE, GPIO_PIN_4 | GPIO_PIN_7);
@@ -263,13 +263,13 @@ int main(void) { ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOF);
GPIOPinConfigure(GPIO_PF2_SSI1CLK);
GPIOPinConfigure(GPIO_PF1_SSI1TX);
- ROM_GPIOPinTypeSSI(GPIO_PORTF_BASE, GPIO_PIN_0 | GPIO_PIN_3); */
+ ROM_GPIOPinTypeSSI(GPIO_PORTF_BASE, GPIO_PIN_0 | GPIO_PIN_3);
/* 200kBd */
SSIConfigSetExpClk(SSI0_BASE, ROM_SysCtlClockGet(), SSI_FRF_MOTO_MODE_0, SSI_MODE_MASTER, 200000, 8);
-/* SSIConfigSetExpClk(SSI1_BASE, ROM_SysCtlClockGet(), SSI_FRF_MOTO_MODE_0, SSI_MODE_MASTER, 200000, 8);
+ SSIConfigSetExpClk(SSI1_BASE, ROM_SysCtlClockGet(), SSI_FRF_MOTO_MODE_0, SSI_MODE_MASTER, 200000, 8);
SSIConfigSetExpClk(SSI2_BASE, ROM_SysCtlClockGet(), SSI_FRF_MOTO_MODE_0, SSI_MODE_MASTER, 200000, 8);
- SSIConfigSetExpClk(SSI3_BASE, ROM_SysCtlClockGet(), SSI_FRF_MOTO_MODE_0, SSI_MODE_MASTER, 200000, 8); */
+ SSIConfigSetExpClk(SSI3_BASE, ROM_SysCtlClockGet(), SSI_FRF_MOTO_MODE_0, SSI_MODE_MASTER, 200000, 8);
/* Configure the µDMA controller for use by the SPI interface */
ROM_SysCtlPeripheralEnable(SYSCTL_PERIPH_UDMA);
@@ -279,27 +279,27 @@ int main(void) { ROM_uDMAControlBaseSet(ucControlTable);
ROM_uDMAChannelAssign(UDMA_CH11_SSI0TX);
-/* ROM_uDMAChannelAssign(UDMA_CH25_SSI1TX);
+ ROM_uDMAChannelAssign(UDMA_CH25_SSI1TX);
ROM_uDMAChannelAssign(UDMA_CH13_SSI2TX);
- ROM_uDMAChannelAssign(UDMA_CH15_SSI3TX); */
+ ROM_uDMAChannelAssign(UDMA_CH15_SSI3TX);
ssi_udma_channel_config(11);
-/* ssi_udma_channel_config(25);
+ ssi_udma_channel_config(25);
ssi_udma_channel_config(13);
- ssi_udma_channel_config(15); */
+ ssi_udma_channel_config(15);
ROM_SSIDMAEnable(SSI0_BASE, SSI_DMA_TX);
-/* ROM_SSIDMAEnable(SSI1_BASE, SSI_DMA_TX);
+ ROM_SSIDMAEnable(SSI1_BASE, SSI_DMA_TX);
ROM_SSIDMAEnable(SSI2_BASE, SSI_DMA_TX);
- ROM_SSIDMAEnable(SSI3_BASE, SSI_DMA_TX); */
+ ROM_SSIDMAEnable(SSI3_BASE, SSI_DMA_TX);
ROM_IntEnable(INT_SSI0);
/* Enable the SSIs after configuring anything around them. */
ROM_SSIEnable(SSI0_BASE);
-/* ROM_SSIEnable(SSI1_BASE);
+ ROM_SSIEnable(SSI1_BASE);
ROM_SSIEnable(SSI2_BASE);
- ROM_SSIEnable(SSI3_BASE); */
+ ROM_SSIEnable(SSI3_BASE);
UARTprintf("Booted.\n");
|