summaryrefslogtreecommitdiff
path: root/gerbonara/tests/resources/allegro/Read_Me.1
diff options
context:
space:
mode:
authorjaseg <git@jaseg.de>2022-06-21 10:53:13 +0200
committerjaseg <git@jaseg.de>2022-06-21 10:53:13 +0200
commit0f70b225cc394338e9c37c1b1c34c3e73609f7d6 (patch)
tree1121a6ccfd5a0ffcb961f59e3a44d894bfbe903a /gerbonara/tests/resources/allegro/Read_Me.1
parent4bd438e9ccba58eecaa848f781eeeace4fb81d3a (diff)
downloadgerbonara-0f70b225cc394338e9c37c1b1c34c3e73609f7d6.tar.gz
gerbonara-0f70b225cc394338e9c37c1b1c34c3e73609f7d6.tar.bz2
gerbonara-0f70b225cc394338e9c37c1b1c34c3e73609f7d6.zip
tests: add missing allegro test files
Diffstat (limited to 'gerbonara/tests/resources/allegro/Read_Me.1')
-rw-r--r--gerbonara/tests/resources/allegro/Read_Me.185
1 files changed, 85 insertions, 0 deletions
diff --git a/gerbonara/tests/resources/allegro/Read_Me.1 b/gerbonara/tests/resources/allegro/Read_Me.1
new file mode 100644
index 0000000..5b1a12a
--- /dev/null
+++ b/gerbonara/tests/resources/allegro/Read_Me.1
@@ -0,0 +1,85 @@
+-----------------------------
+ANALOG DEVICES - Division
+-----------------------------
+
+Product Line:
+
+Board Name: 08_057494d
+
+P/N: 09-057494 Rev d
+
+PEOPLE INVOLVED
+---------------------------------------
+Design Engineer involved:
+Layout Designer involved: 1
+
+CAD TOOLS
+----------------------------------------
+Layout Software and Version: Allegro 17.2
+Schematic Software and Version: 17.2
+
+
+Notes:
+
+FLASH PAD GEOMETRY:
+
+ NEGATIVE LAYER FLASH PADS;
+
+ 1. Thermal Relief flash Pads. Are dimensioned in mils,
+ without leading zeros. They are encoded as follows:
+
+ t 90 70 15x45 sp4
+ | | | | |_ number of spokes
+ | | | |
+ | | | |_spoke width and angle
+ | | |
+ | | |_inside diameter
+ | |
+ | |_outside diameter
+ |
+ |_thermal relief
+
+ 2. tdirect is used to make full contact with the plane.
+ A 5 mil circle or blank flash may be substituted.
+
+ 3. Anti-pad with copper pad retained. Used on negative layers
+ where pad must be used as land contact for blind or buried vias
+
+ s ap 20 12
+ | | | |_ inside pad dimention
+ | | |
+ | | |_ outside anti-pad dimention
+ | |
+ | |_ anti-pad designator
+ |
+ |_ s = square i.d. o.d. dimentions
+ c = circular i.d. o.d. dimentions
+
+ POSITIVE LAYER FLASH PADS;
+
+ 1. cir40 (cir#) is used to indicate a spotting pad for non-plated holes.
+ A 40 (or #) mil circle or blank flash may be substituted.
+
+ 2. Doughnut pads are used where land is required around non-plated holes
+ with relief of the land for the non-plated drill. They are encoded as follows:
+
+ dp 250 x 190
+ | | |_ inside diameter
+ | |
+ | |_ outside diameter
+ |
+ |_ doughnut pad
+
+________________________________________________________________________
+
+The following listed contacts are for the initial design order indicated
+by the lot and dock delivery date listed below. Subsequent questions are
+to be routed through the agent indicated on the purchase order.
+
+Analog Devices Inc. -
+
+Primary Contact : 1
+Phone :
+Fax :
+Boards to be bare board tested : YES
+Boards to be TDR tested : YES