Merge pull request #4 from hamiltonkibbe/master

Many fixes in parsing, rendering and new features

9 files changed, 824 insertions, 0 deletions

diff --git a/doc/Makefile b/doc/Makefile
new file mode 100644
index 0000000..5c6b560
--- /dev/null
+++ b/doc/Makefile
@@ -0,0 +1,177 @@
+# Makefile for Sphinx documentation
+#
+
+# You can set these variables from the command line.
+SPHINXOPTS    =
+SPHINXBUILD   = sphinx-build
+PAPER         =
+BUILDDIR      = build
+
+# User-friendly check for sphinx-build
+ifeq ($(shell which $(SPHINXBUILD) >/dev/null 2>&1; echo $$?), 1)
+$(error The '$(SPHINXBUILD)' command was not found. Make sure you have Sphinx installed, then set the SPHINXBUILD environment variable to point to the full path of the '$(SPHINXBUILD)' executable. Alternatively you can add the directory with the executable to your PATH. If you don't have Sphinx installed, grab it from http://sphinx-doc.org/)
+endif
+
+# Internal variables.
+PAPEROPT_a4     = -D latex_paper_size=a4
+PAPEROPT_letter = -D latex_paper_size=letter
+ALLSPHINXOPTS   = -d $(BUILDDIR)/doctrees $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) source
+# the i18n builder cannot share the environment and doctrees with the others
+I18NSPHINXOPTS  = $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) source
+
+.PHONY: help clean html dirhtml singlehtml pickle json htmlhelp qthelp devhelp epub latex latexpdf text man changes linkcheck doctest gettext
+
+help:
+	@echo "Please use \`make <target>' where <target> is one of"
+	@echo "  html       to make standalone HTML files"
+	@echo "  dirhtml    to make HTML files named index.html in directories"
+	@echo "  singlehtml to make a single large HTML file"
+	@echo "  pickle     to make pickle files"
+	@echo "  json       to make JSON files"
+	@echo "  htmlhelp   to make HTML files and a HTML help project"
+	@echo "  qthelp     to make HTML files and a qthelp project"
+	@echo "  devhelp    to make HTML files and a Devhelp project"
+	@echo "  epub       to make an epub"
+	@echo "  latex      to make LaTeX files, you can set PAPER=a4 or PAPER=letter"
+	@echo "  latexpdf   to make LaTeX files and run them through pdflatex"
+	@echo "  latexpdfja to make LaTeX files and run them through platex/dvipdfmx"
+	@echo "  text       to make text files"
+	@echo "  man        to make manual pages"
+	@echo "  texinfo    to make Texinfo files"
+	@echo "  info       to make Texinfo files and run them through makeinfo"
+	@echo "  gettext    to make PO message catalogs"
+	@echo "  changes    to make an overview of all changed/added/deprecated items"
+	@echo "  xml        to make Docutils-native XML files"
+	@echo "  pseudoxml  to make pseudoxml-XML files for display purposes"
+	@echo "  linkcheck  to check all external links for integrity"
+	@echo "  doctest    to run all doctests embedded in the documentation (if enabled)"
+
+clean:
+	rm -rf $(BUILDDIR)/*
+
+html:
+	$(SPHINXBUILD) -b html $(ALLSPHINXOPTS) $(BUILDDIR)/html
+	@echo
+	@echo "Build finished. The HTML pages are in $(BUILDDIR)/html."
+
+dirhtml:
+	$(SPHINXBUILD) -b dirhtml $(ALLSPHINXOPTS) $(BUILDDIR)/dirhtml
+	@echo
+	@echo "Build finished. The HTML pages are in $(BUILDDIR)/dirhtml."
+
+singlehtml:
+	$(SPHINXBUILD) -b singlehtml $(ALLSPHINXOPTS) $(BUILDDIR)/singlehtml
+	@echo
+	@echo "Build finished. The HTML page is in $(BUILDDIR)/singlehtml."
+
+pickle:
+	$(SPHINXBUILD) -b pickle $(ALLSPHINXOPTS) $(BUILDDIR)/pickle
+	@echo
+	@echo "Build finished; now you can process the pickle files."
+
+json:
+	$(SPHINXBUILD) -b json $(ALLSPHINXOPTS) $(BUILDDIR)/json
+	@echo
+	@echo "Build finished; now you can process the JSON files."
+
+htmlhelp:
+	$(SPHINXBUILD) -b htmlhelp $(ALLSPHINXOPTS) $(BUILDDIR)/htmlhelp
+	@echo
+	@echo "Build finished; now you can run HTML Help Workshop with the" \
+	      ".hhp project file in $(BUILDDIR)/htmlhelp."
+
+qthelp:
+	$(SPHINXBUILD) -b qthelp $(ALLSPHINXOPTS) $(BUILDDIR)/qthelp
+	@echo
+	@echo "Build finished; now you can run "qcollectiongenerator" with the" \
+	      ".qhcp project file in $(BUILDDIR)/qthelp, like this:"
+	@echo "# qcollectiongenerator $(BUILDDIR)/qthelp/GerberTools.qhcp"
+	@echo "To view the help file:"
+	@echo "# assistant -collectionFile $(BUILDDIR)/qthelp/GerberTools.qhc"
+
+devhelp:
+	$(SPHINXBUILD) -b devhelp $(ALLSPHINXOPTS) $(BUILDDIR)/devhelp
+	@echo
+	@echo "Build finished."
+	@echo "To view the help file:"
+	@echo "# mkdir -p $$HOME/.local/share/devhelp/GerberTools"
+	@echo "# ln -s $(BUILDDIR)/devhelp $$HOME/.local/share/devhelp/GerberTools"
+	@echo "# devhelp"
+
+epub:
+	$(SPHINXBUILD) -b epub $(ALLSPHINXOPTS) $(BUILDDIR)/epub
+	@echo
+	@echo "Build finished. The epub file is in $(BUILDDIR)/epub."
+
+latex:
+	$(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
+	@echo
+	@echo "Build finished; the LaTeX files are in $(BUILDDIR)/latex."
+	@echo "Run \`make' in that directory to run these through (pdf)latex" \
+	      "(use \`make latexpdf' here to do that automatically)."
+
+latexpdf:
+	$(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
+	@echo "Running LaTeX files through pdflatex..."
+	$(MAKE) -C $(BUILDDIR)/latex all-pdf
+	@echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex."
+
+latexpdfja:
+	$(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
+	@echo "Running LaTeX files through platex and dvipdfmx..."
+	$(MAKE) -C $(BUILDDIR)/latex all-pdf-ja
+	@echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex."
+
+text:
+	$(SPHINXBUILD) -b text $(ALLSPHINXOPTS) $(BUILDDIR)/text
+	@echo
+	@echo "Build finished. The text files are in $(BUILDDIR)/text."
+
+man:
+	$(SPHINXBUILD) -b man $(ALLSPHINXOPTS) $(BUILDDIR)/man
+	@echo
+	@echo "Build finished. The manual pages are in $(BUILDDIR)/man."
+
+texinfo:
+	$(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo
+	@echo
+	@echo "Build finished. The Texinfo files are in $(BUILDDIR)/texinfo."
+	@echo "Run \`make' in that directory to run these through makeinfo" \
+	      "(use \`make info' here to do that automatically)."
+
+info:
+	$(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo
+	@echo "Running Texinfo files through makeinfo..."
+	make -C $(BUILDDIR)/texinfo info
+	@echo "makeinfo finished; the Info files are in $(BUILDDIR)/texinfo."
+
+gettext:
+	$(SPHINXBUILD) -b gettext $(I18NSPHINXOPTS) $(BUILDDIR)/locale
+	@echo
+	@echo "Build finished. The message catalogs are in $(BUILDDIR)/locale."
+
+changes:
+	$(SPHINXBUILD) -b changes $(ALLSPHINXOPTS) $(BUILDDIR)/changes
+	@echo
+	@echo "The overview file is in $(BUILDDIR)/changes."
+
+linkcheck:
+	$(SPHINXBUILD) -b linkcheck $(ALLSPHINXOPTS) $(BUILDDIR)/linkcheck
+	@echo
+	@echo "Link check complete; look for any errors in the above output " \
+	      "or in $(BUILDDIR)/linkcheck/output.txt."
+
+doctest:
+	$(SPHINXBUILD) -b doctest $(ALLSPHINXOPTS) $(BUILDDIR)/doctest
+	@echo "Testing of doctests in the sources finished, look at the " \
+	      "results in $(BUILDDIR)/doctest/output.txt."
+
+xml:
+	$(SPHINXBUILD) -b xml $(ALLSPHINXOPTS) $(BUILDDIR)/xml
+	@echo
+	@echo "Build finished. The XML files are in $(BUILDDIR)/xml."
+
+pseudoxml:
+	$(SPHINXBUILD) -b pseudoxml $(ALLSPHINXOPTS) $(BUILDDIR)/pseudoxml
+	@echo
+	@echo "Build finished. The pseudo-XML files are in $(BUILDDIR)/pseudoxml."
diff --git a/doc/make.bat b/doc/make.bat
new file mode 100644
index 0000000..2860659
--- /dev/null
+++ b/doc/make.bat
@@ -0,0 +1,242 @@
+@ECHO OFF

+

+REM Command file for Sphinx documentation

+

+if "%SPHINXBUILD%" == "" (

+	set SPHINXBUILD=sphinx-build

+)

+set BUILDDIR=build

+set ALLSPHINXOPTS=-d %BUILDDIR%/doctrees %SPHINXOPTS% source

+set I18NSPHINXOPTS=%SPHINXOPTS% source

+if NOT "%PAPER%" == "" (

+	set ALLSPHINXOPTS=-D latex_paper_size=%PAPER% %ALLSPHINXOPTS%

+	set I18NSPHINXOPTS=-D latex_paper_size=%PAPER% %I18NSPHINXOPTS%

+)

+

+if "%1" == "" goto help

+

+if "%1" == "help" (

+	:help

+	echo.Please use `make ^<target^>` where ^<target^> is one of

+	echo.  html       to make standalone HTML files

+	echo.  dirhtml    to make HTML files named index.html in directories

+	echo.  singlehtml to make a single large HTML file

+	echo.  pickle     to make pickle files

+	echo.  json       to make JSON files

+	echo.  htmlhelp   to make HTML files and a HTML help project

+	echo.  qthelp     to make HTML files and a qthelp project

+	echo.  devhelp    to make HTML files and a Devhelp project

+	echo.  epub       to make an epub

+	echo.  latex      to make LaTeX files, you can set PAPER=a4 or PAPER=letter

+	echo.  text       to make text files

+	echo.  man        to make manual pages

+	echo.  texinfo    to make Texinfo files

+	echo.  gettext    to make PO message catalogs

+	echo.  changes    to make an overview over all changed/added/deprecated items

+	echo.  xml        to make Docutils-native XML files

+	echo.  pseudoxml  to make pseudoxml-XML files for display purposes

+	echo.  linkcheck  to check all external links for integrity

+	echo.  doctest    to run all doctests embedded in the documentation if enabled

+	goto end

+)

+

+if "%1" == "clean" (

+	for /d %%i in (%BUILDDIR%\*) do rmdir /q /s %%i

+	del /q /s %BUILDDIR%\*

+	goto end

+)

+

+

+%SPHINXBUILD% 2> nul

+if errorlevel 9009 (

+	echo.

+	echo.The 'sphinx-build' command was not found. Make sure you have Sphinx

+	echo.installed, then set the SPHINXBUILD environment variable to point

+	echo.to the full path of the 'sphinx-build' executable. Alternatively you

+	echo.may add the Sphinx directory to PATH.

+	echo.

+	echo.If you don't have Sphinx installed, grab it from

+	echo.http://sphinx-doc.org/

+	exit /b 1

+)

+

+if "%1" == "html" (

+	%SPHINXBUILD% -b html %ALLSPHINXOPTS% %BUILDDIR%/html

+	if errorlevel 1 exit /b 1

+	echo.

+	echo.Build finished. The HTML pages are in %BUILDDIR%/html.

+	goto end

+)

+

+if "%1" == "dirhtml" (

+	%SPHINXBUILD% -b dirhtml %ALLSPHINXOPTS% %BUILDDIR%/dirhtml

+	if errorlevel 1 exit /b 1

+	echo.

+	echo.Build finished. The HTML pages are in %BUILDDIR%/dirhtml.

+	goto end

+)

+

+if "%1" == "singlehtml" (

+	%SPHINXBUILD% -b singlehtml %ALLSPHINXOPTS% %BUILDDIR%/singlehtml

+	if errorlevel 1 exit /b 1

+	echo.

+	echo.Build finished. The HTML pages are in %BUILDDIR%/singlehtml.

+	goto end

+)

+

+if "%1" == "pickle" (

+	%SPHINXBUILD% -b pickle %ALLSPHINXOPTS% %BUILDDIR%/pickle

+	if errorlevel 1 exit /b 1

+	echo.

+	echo.Build finished; now you can process the pickle files.

+	goto end

+)

+

+if "%1" == "json" (

+	%SPHINXBUILD% -b json %ALLSPHINXOPTS% %BUILDDIR%/json

+	if errorlevel 1 exit /b 1

+	echo.

+	echo.Build finished; now you can process the JSON files.

+	goto end

+)

+

+if "%1" == "htmlhelp" (

+	%SPHINXBUILD% -b htmlhelp %ALLSPHINXOPTS% %BUILDDIR%/htmlhelp

+	if errorlevel 1 exit /b 1

+	echo.

+	echo.Build finished; now you can run HTML Help Workshop with the ^

+.hhp project file in %BUILDDIR%/htmlhelp.

+	goto end

+)

+

+if "%1" == "qthelp" (

+	%SPHINXBUILD% -b qthelp %ALLSPHINXOPTS% %BUILDDIR%/qthelp

+	if errorlevel 1 exit /b 1

+	echo.

+	echo.Build finished; now you can run "qcollectiongenerator" with the ^

+.qhcp project file in %BUILDDIR%/qthelp, like this:

+	echo.^> qcollectiongenerator %BUILDDIR%\qthelp\GerberTools.qhcp

+	echo.To view the help file:

+	echo.^> assistant -collectionFile %BUILDDIR%\qthelp\GerberTools.ghc

+	goto end

+)

+

+if "%1" == "devhelp" (

+	%SPHINXBUILD% -b devhelp %ALLSPHINXOPTS% %BUILDDIR%/devhelp

+	if errorlevel 1 exit /b 1

+	echo.

+	echo.Build finished.

+	goto end

+)

+

+if "%1" == "epub" (

+	%SPHINXBUILD% -b epub %ALLSPHINXOPTS% %BUILDDIR%/epub

+	if errorlevel 1 exit /b 1

+	echo.

+	echo.Build finished. The epub file is in %BUILDDIR%/epub.

+	goto end

+)

+

+if "%1" == "latex" (

+	%SPHINXBUILD% -b latex %ALLSPHINXOPTS% %BUILDDIR%/latex

+	if errorlevel 1 exit /b 1

+	echo.

+	echo.Build finished; the LaTeX files are in %BUILDDIR%/latex.

+	goto end

+)

+

+if "%1" == "latexpdf" (

+	%SPHINXBUILD% -b latex %ALLSPHINXOPTS% %BUILDDIR%/latex

+	cd %BUILDDIR%/latex

+	make all-pdf

+	cd %BUILDDIR%/..

+	echo.

+	echo.Build finished; the PDF files are in %BUILDDIR%/latex.

+	goto end

+)

+

+if "%1" == "latexpdfja" (

+	%SPHINXBUILD% -b latex %ALLSPHINXOPTS% %BUILDDIR%/latex

+	cd %BUILDDIR%/latex

+	make all-pdf-ja

+	cd %BUILDDIR%/..

+	echo.

+	echo.Build finished; the PDF files are in %BUILDDIR%/latex.

+	goto end

+)

+

+if "%1" == "text" (

+	%SPHINXBUILD% -b text %ALLSPHINXOPTS% %BUILDDIR%/text

+	if errorlevel 1 exit /b 1

+	echo.

+	echo.Build finished. The text files are in %BUILDDIR%/text.

+	goto end

+)

+

+if "%1" == "man" (

+	%SPHINXBUILD% -b man %ALLSPHINXOPTS% %BUILDDIR%/man

+	if errorlevel 1 exit /b 1

+	echo.

+	echo.Build finished. The manual pages are in %BUILDDIR%/man.

+	goto end

+)

+

+if "%1" == "texinfo" (

+	%SPHINXBUILD% -b texinfo %ALLSPHINXOPTS% %BUILDDIR%/texinfo

+	if errorlevel 1 exit /b 1

+	echo.

+	echo.Build finished. The Texinfo files are in %BUILDDIR%/texinfo.

+	goto end

+)

+

+if "%1" == "gettext" (

+	%SPHINXBUILD% -b gettext %I18NSPHINXOPTS% %BUILDDIR%/locale

+	if errorlevel 1 exit /b 1

+	echo.

+	echo.Build finished. The message catalogs are in %BUILDDIR%/locale.

+	goto end

+)

+

+if "%1" == "changes" (

+	%SPHINXBUILD% -b changes %ALLSPHINXOPTS% %BUILDDIR%/changes

+	if errorlevel 1 exit /b 1

+	echo.

+	echo.The overview file is in %BUILDDIR%/changes.

+	goto end

+)

+

+if "%1" == "linkcheck" (

+	%SPHINXBUILD% -b linkcheck %ALLSPHINXOPTS% %BUILDDIR%/linkcheck

+	if errorlevel 1 exit /b 1

+	echo.

+	echo.Link check complete; look for any errors in the above output ^

+or in %BUILDDIR%/linkcheck/output.txt.

+	goto end

+)

+

+if "%1" == "doctest" (

+	%SPHINXBUILD% -b doctest %ALLSPHINXOPTS% %BUILDDIR%/doctest

+	if errorlevel 1 exit /b 1

+	echo.

+	echo.Testing of doctests in the sources finished, look at the ^

+results in %BUILDDIR%/doctest/output.txt.

+	goto end

+)

+

+if "%1" == "xml" (

+	%SPHINXBUILD% -b xml %ALLSPHINXOPTS% %BUILDDIR%/xml

+	if errorlevel 1 exit /b 1

+	echo.

+	echo.Build finished. The XML files are in %BUILDDIR%/xml.

+	goto end

+)

+

+if "%1" == "pseudoxml" (

+	%SPHINXBUILD% -b pseudoxml %ALLSPHINXOPTS% %BUILDDIR%/pseudoxml

+	if errorlevel 1 exit /b 1

+	echo.

+	echo.Build finished. The pseudo-XML files are in %BUILDDIR%/pseudoxml.

+	goto end

+)

+

+:end

diff --git a/doc/source/conf.py b/doc/source/conf.py
new file mode 100644
index 0000000..a118546
--- /dev/null
+++ b/doc/source/conf.py
@@ -0,0 +1,262 @@
+# -*- coding: utf-8 -*-

+#

+# Gerber Tools documentation build configuration file, created by

+# sphinx-quickstart on Sun Sep 28 18:16:46 2014.

+#

+# This file is execfile()d with the current directory set to its

+# containing dir.

+#

+# Note that not all possible configuration values are present in this

+# autogenerated file.

+#

+# All configuration values have a default; values that are commented out

+# serve to show the default.

+

+import sys

+import os

+

+# If extensions (or modules to document with autodoc) are in another directory,

+# add these directories to sys.path here. If the directory is relative to the

+# documentation root, use os.path.abspath to make it absolute, like shown here.

+sys.path.insert(0, os.path.abspath('../../'))

+

+# -- General configuration ------------------------------------------------

+

+# If your documentation needs a minimal Sphinx version, state it here.

+#needs_sphinx = '1.0'

+

+# Add any Sphinx extension module names here, as strings. They can be

+# extensions coming with Sphinx (named 'sphinx.ext.*') or your custom

+# ones.

+extensions = [

+    'sphinx.ext.autodoc',

+    'sphinx.ext.autosummary',

+    'numpydoc',

+]

+

+# Add any paths that contain templates here, relative to this directory.

+templates_path = ['_templates']

+

+# The suffix of source filenames.

+source_suffix = '.rst'

+

+# The encoding of source files.

+#source_encoding = 'utf-8-sig'

+

+# The master toctree document.

+master_doc = 'index'

+

+# General information about the project.

+project = u'Gerber Tools'

+copyright = u'2014, Hamilton Kibbe'

+

+# The version info for the project you're documenting, acts as replacement for

+# |version| and |release|, also used in various other places throughout the

+# built documents.

+#

+# The short X.Y version.

+version = '0.1'

+# The full version, including alpha/beta/rc tags.

+release = '0.1'

+

+# The language for content autogenerated by Sphinx. Refer to documentation

+# for a list of supported languages.

+#language = None

+

+# There are two options for replacing |today|: either, you set today to some

+# non-false value, then it is used:

+#today = ''

+# Else, today_fmt is used as the format for a strftime call.

+#today_fmt = '%B %d, %Y'

+

+# List of patterns, relative to source directory, that match files and

+# directories to ignore when looking for source files.

+exclude_patterns = []

+

+# The reST default role (used for this markup: `text`) to use for all

+# documents.

+#default_role = None

+

+# If true, '()' will be appended to :func: etc. cross-reference text.

+#add_function_parentheses = True

+

+# If true, the current module name will be prepended to all description

+# unit titles (such as .. function::).

+#add_module_names = True

+

+# If true, sectionauthor and moduleauthor directives will be shown in the

+# output. They are ignored by default.

+show_authors = False

+

+# The name of the Pygments (syntax highlighting) style to use.

+pygments_style = 'sphinx'

+

+# A list of ignored prefixes for module index sorting.

+#modindex_common_prefix = []

+

+# If true, keep warnings as "system message" paragraphs in the built documents.

+#keep_warnings = False

+

+

+# -- Options for HTML output ----------------------------------------------

+

+# The theme to use for HTML and HTML Help pages.  See the documentation for

+# a list of builtin themes.

+html_theme = 'default'

+

+# Theme options are theme-specific and customize the look and feel of a theme

+# further.  For a list of options available for each theme, see the

+# documentation.

+#html_theme_options = {}

+

+# Add any paths that contain custom themes here, relative to this directory.

+#html_theme_path = []

+

+# The name for this set of Sphinx documents.  If None, it defaults to

+# "<project> v<release> documentation".

+#html_title = None

+

+# A shorter title for the navigation bar.  Default is the same as html_title.

+#html_short_title = None

+

+# The name of an image file (relative to this directory) to place at the top

+# of the sidebar.

+#html_logo = None

+

+# The name of an image file (within the static path) to use as favicon of the

+# docs.  This file should be a Windows icon file (.ico) being 16x16 or 32x32

+# pixels large.

+#html_favicon = None

+

+# Add any paths that contain custom static files (such as style sheets) here,

+# relative to this directory. They are copied after the builtin static files,

+# so a file named "default.css" will overwrite the builtin "default.css".

+html_static_path = ['_static']

+

+# Add any extra paths that contain custom files (such as robots.txt or

+# .htaccess) here, relative to this directory. These files are copied

+# directly to the root of the documentation.

+#html_extra_path = []

+

+# If not '', a 'Last updated on:' timestamp is inserted at every page bottom,

+# using the given strftime format.

+#html_last_updated_fmt = '%b %d, %Y'

+

+# If true, SmartyPants will be used to convert quotes and dashes to

+# typographically correct entities.

+#html_use_smartypants = True

+

+# Custom sidebar templates, maps document names to template names.

+#html_sidebars = {}

+

+# Additional templates that should be rendered to pages, maps page names to

+# template names.

+#html_additional_pages = {}

+

+# If false, no module index is generated.

+#html_domain_indices = True

+

+# If false, no index is generated.

+#html_use_index = True

+

+# If true, the index is split into individual pages for each letter.

+#html_split_index = False

+

+# If true, links to the reST sources are added to the pages.

+#html_show_sourcelink = True

+

+# If true, "Created using Sphinx" is shown in the HTML footer. Default is True.

+#html_show_sphinx = True

+

+# If true, "(C) Copyright ..." is shown in the HTML footer. Default is True.

+#html_show_copyright = True

+

+# If true, an OpenSearch description file will be output, and all pages will

+# contain a <link> tag referring to it.  The value of this option must be the

+# base URL from which the finished HTML is served.

+#html_use_opensearch = ''

+

+# This is the file name suffix for HTML files (e.g. ".xhtml").

+#html_file_suffix = None

+

+# Output file base name for HTML help builder.

+htmlhelp_basename = 'GerberToolsdoc'

+

+

+# -- Options for LaTeX output ---------------------------------------------

+

+latex_elements = {

+# The paper size ('letterpaper' or 'a4paper').

+#'papersize': 'letterpaper',

+

+# The font size ('10pt', '11pt' or '12pt').

+#'pointsize': '10pt',

+

+# Additional stuff for the LaTeX preamble.

+#'preamble': '',

+}

+

+# Grouping the document tree into LaTeX files. List of tuples

+# (source start file, target name, title,

+#  author, documentclass [howto, manual, or own class]).

+latex_documents = [

+  ('index', 'GerberTools.tex', u'Gerber Tools Documentation',

+   u'Hamilton Kibbe', 'manual'),

+]

+

+# The name of an image file (relative to this directory) to place at the top of

+# the title page.

+#latex_logo = None

+

+# For "manual" documents, if this is true, then toplevel headings are parts,

+# not chapters.

+#latex_use_parts = False

+

+# If true, show page references after internal links.

+#latex_show_pagerefs = False

+

+# If true, show URL addresses after external links.

+#latex_show_urls = False

+

+# Documents to append as an appendix to all manuals.

+#latex_appendices = []

+

+# If false, no module index is generated.

+#latex_domain_indices = True

+

+

+# -- Options for manual page output ---------------------------------------

+

+# One entry per manual page. List of tuples

+# (source start file, name, description, authors, manual section).

+man_pages = [

+    ('index', 'gerbertools', u'Gerber Tools Documentation',

+     [u'Hamilton Kibbe'], 1)

+]

+

+# If true, show URL addresses after external links.

+#man_show_urls = False

+

+

+# -- Options for Texinfo output -------------------------------------------

+

+# Grouping the document tree into Texinfo files. List of tuples

+# (source start file, target name, title, author,

+#  dir menu entry, description, category)

+texinfo_documents = [

+  ('index', 'GerberTools', u'Gerber Tools Documentation',

+   u'Hamilton Kibbe', 'GerberTools', 'One line description of project.',

+   'Miscellaneous'),

+]

+

+# Documents to append as an appendix to all manuals.

+#texinfo_appendices = []

+

+# If false, no module index is generated.

+#texinfo_domain_indices = True

+

+# How to display URL addresses: 'footnote', 'no', or 'inline'.

+#texinfo_show_urls = 'footnote'

+

+# If true, do not generate a @detailmenu in the "Top" node's menu.

+#texinfo_no_detailmenu = False

diff --git a/doc/source/documentation/excellon.rst b/doc/source/documentation/excellon.rst
new file mode 100644
index 0000000..7ac3b39
--- /dev/null
+++ b/doc/source/documentation/excellon.rst
@@ -0,0 +1,42 @@
+:mod:`excellon` --- Excellon file handling
+==============================================
+
+.. module:: excellon
+   :synopsis: Functions and classes for handling Excellon files
+.. sectionauthor:: Hamilton Kibbe <ham@hamiltonkib.be>
+
+
+The Excellon format is the most common format for exporting PCB drill
+information. The Excellon format is used to program CNC drilling macines for
+drilling holes in PCBs. As such, excellon files are sometimes refererred to as
+NC-drill files.  The Excellon format reference is available 
+`here <http://www.excellon.com/manuals/program.htm>`_. The :mod:`excellon`
+submodule implements calsses to read and write excellon files without having
+to know the precise details of the format.
+
+The :mod:`excellon` submodule's :func:`read` function serves as a
+simple interface for parsing excellon files.  The :class:`ExcellonFile` class
+stores all the information contained in an Excellon file allowing the file to
+be analyzed, modified, and updated. The :class:`ExcellonParser` class is used
+in the background for parsing RS-274X files.
+
+.. _excellon-contents:
+
+Functions
+---------
+The :mod:`excellon` module defines the following functions:
+
+.. autofunction:: gerber.excellon.read
+    
+
+Classes
+-------
+The :mod:`excellon` module defines the following classes:
+
+.. autoclass:: gerber.excellon.ExcellonFile
+    :members:
+    
+
+.. autoclass:: gerber.excellon.ExcellonParser
+    :members:
+    
\ No newline at end of file
diff --git a/doc/source/documentation/index.rst b/doc/source/documentation/index.rst
new file mode 100644
index 0000000..3d8241a
--- /dev/null
+++ b/doc/source/documentation/index.rst
@@ -0,0 +1,11 @@
+Gerber Tools Reference
+======================
+
+.. toctree::
+    :maxdepth: 2
+
+    Gerber (RS-274X) Files <rs274x>
+    Excellon Files <excellon>
+    Rendering <render>
+    
+
diff --git a/doc/source/documentation/render.rst b/doc/source/documentation/render.rst
new file mode 100644
index 0000000..324ef71
--- /dev/null
+++ b/doc/source/documentation/render.rst
@@ -0,0 +1,11 @@
+:mod:`render` --- Gerber file Rendering
+==============================================
+
+.. module:: render
+   :synopsis: Functions and classes for handling Excellon files
+.. sectionauthor:: Hamilton Kibbe <ham@hamiltonkib.be>
+
+Render Module
+-------------
+.. automodule:: gerber.render.render
+    :members:
diff --git a/doc/source/documentation/rs274x.rst b/doc/source/documentation/rs274x.rst
new file mode 100644
index 0000000..bc99519
--- /dev/null
+++ b/doc/source/documentation/rs274x.rst
@@ -0,0 +1,37 @@
+:mod:`rs274x` --- RS-274X file handling
+==============================================
+
+.. module:: rs274x
+   :synopsis: Functions and classes for handling RS-274X  files
+.. sectionauthor:: Hamilton Kibbe <ham@hamiltonkib.be>
+
+
+The RS-274X (Gerber) format is the most common format for exporting PCB
+artwork.  The Specification is published by Ucamco and is available
+`here <http://www.ucamco.com/files/downloads/file/81/the_gerber_file_format_specification.pdf>`_.
+The :mod:`rs274x` submodule implements calsses to read and write
+RS-274X files without having to know the precise details of the format.
+
+The :mod:`rs274x` submodule's :func:`read` function serves as a
+simple interface for parsing gerber files.  The :class:`GerberFile` class
+stores all the information contained in a gerber file allowing the file to be
+analyzed, modified, and updated. The :class:`GerberParser` class is used in
+the background for parsing RS-274X files.
+
+.. _gerber-contents:
+
+Functions
+---------
+The :mod:`rs274x` module defines the following functions:
+
+.. autofunction:: gerber.rs274x.read
+
+Classes
+-------
+The :mod:`rs274x` module defines the following classes:
+
+.. autoclass:: gerber.rs274x.GerberFile
+    :members:
+
+.. autoclass:: gerber.rs274x.GerberParser                                 
+    :members:
\ No newline at end of file
diff --git a/doc/source/index.rst b/doc/source/index.rst
new file mode 100644
index 0000000..aec8b48
--- /dev/null
+++ b/doc/source/index.rst
@@ -0,0 +1,23 @@
+.. Gerber Tools documentation master file, created by

+   sphinx-quickstart on Sun Sep 28 18:16:46 2014.

+   You can adapt this file completely to your liking, but it should at least

+   contain the root `toctree` directive.

+

+Gerber-Tools!

+========================================

+

+Contents:

+

+.. toctree::

+    :maxdepth: 1

+    

+    intro

+    documentation/index

+

+Indices and tables

+==================

+

+* :ref:`genindex`

+* :ref:`modindex`

+* :ref:`search`

+

diff --git a/doc/source/intro.rst b/doc/source/intro.rst
new file mode 100644
index 0000000..1982fc8
--- /dev/null
+++ b/doc/source/intro.rst
@@ -0,0 +1,19 @@
+Gerber Tools Intro
+==================
+    
+PCB CAM (Gerber) Files
+------------
+
+PCB design files (artwork) are most often stored in `Gerber` files. This is
+a generic term that may refer to `RS-274X (Gerber) <http://en.wikipedia.org/wiki/Gerber_format>`_,
+`ODB++ <http://en.wikipedia.org/wiki/ODB%2B%2B>`_, or `Excellon <http://en.wikipedia.org/wiki/Excellon_format>`_
+files.
+
+
+Gerber-Tools
+------------
+
+The gerber-tools module provides tools for working with and rendering Gerber
+and Excellon files. 
+
+