From c60a858c9c28b99bea270bc63bd6126fcb3ee20b Mon Sep 17 00:00:00 2001 From: Hamilton Kibbe Date: Sun, 28 Sep 2014 21:18:25 -0400 Subject: added doc folder --- doc/Makefile | 177 +++++++++++++++++++++++++++++++++++ doc/make.bat | 242 +++++++++++++++++++++++++++++++++++++++++++++++ doc/source/conf.py | 260 +++++++++++++++++++++++++++++++++++++++++++++++++++ doc/source/index.rst | 29 ++++++ 4 files changed, 708 insertions(+) create mode 100644 doc/Makefile create mode 100644 doc/make.bat create mode 100644 doc/source/conf.py create mode 100644 doc/source/index.rst (limited to 'doc') diff --git a/doc/Makefile b/doc/Makefile new file mode 100644 index 0000000..5c6b560 --- /dev/null +++ b/doc/Makefile @@ -0,0 +1,177 @@ +# Makefile for Sphinx documentation +# + +# You can set these variables from the command line. +SPHINXOPTS = +SPHINXBUILD = sphinx-build +PAPER = +BUILDDIR = build + +# User-friendly check for sphinx-build +ifeq ($(shell which $(SPHINXBUILD) >/dev/null 2>&1; echo $$?), 1) +$(error The '$(SPHINXBUILD)' command was not found. Make sure you have Sphinx installed, then set the SPHINXBUILD environment variable to point to the full path of the '$(SPHINXBUILD)' executable. Alternatively you can add the directory with the executable to your PATH. If you don't have Sphinx installed, grab it from http://sphinx-doc.org/) +endif + +# Internal variables. +PAPEROPT_a4 = -D latex_paper_size=a4 +PAPEROPT_letter = -D latex_paper_size=letter +ALLSPHINXOPTS = -d $(BUILDDIR)/doctrees $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) source +# the i18n builder cannot share the environment and doctrees with the others +I18NSPHINXOPTS = $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) source + +.PHONY: help clean html dirhtml singlehtml pickle json htmlhelp qthelp devhelp epub latex latexpdf text man changes linkcheck doctest gettext + +help: + @echo "Please use \`make ' where is one of" + @echo " html to make standalone HTML files" + @echo " dirhtml to make HTML files named index.html in directories" + @echo " singlehtml to make a single large HTML file" + @echo " pickle to make pickle files" + @echo " json to make JSON files" + @echo " htmlhelp to make HTML files and a HTML help project" + @echo " qthelp to make HTML files and a qthelp project" + @echo " devhelp to make HTML files and a Devhelp project" + @echo " epub to make an epub" + @echo " latex to make LaTeX files, you can set PAPER=a4 or PAPER=letter" + @echo " latexpdf to make LaTeX files and run them through pdflatex" + @echo " latexpdfja to make LaTeX files and run them through platex/dvipdfmx" + @echo " text to make text files" + @echo " man to make manual pages" + @echo " texinfo to make Texinfo files" + @echo " info to make Texinfo files and run them through makeinfo" + @echo " gettext to make PO message catalogs" + @echo " changes to make an overview of all changed/added/deprecated items" + @echo " xml to make Docutils-native XML files" + @echo " pseudoxml to make pseudoxml-XML files for display purposes" + @echo " linkcheck to check all external links for integrity" + @echo " doctest to run all doctests embedded in the documentation (if enabled)" + +clean: + rm -rf $(BUILDDIR)/* + +html: + $(SPHINXBUILD) -b html $(ALLSPHINXOPTS) $(BUILDDIR)/html + @echo + @echo "Build finished. The HTML pages are in $(BUILDDIR)/html." + +dirhtml: + $(SPHINXBUILD) -b dirhtml $(ALLSPHINXOPTS) $(BUILDDIR)/dirhtml + @echo + @echo "Build finished. The HTML pages are in $(BUILDDIR)/dirhtml." + +singlehtml: + $(SPHINXBUILD) -b singlehtml $(ALLSPHINXOPTS) $(BUILDDIR)/singlehtml + @echo + @echo "Build finished. The HTML page is in $(BUILDDIR)/singlehtml." + +pickle: + $(SPHINXBUILD) -b pickle $(ALLSPHINXOPTS) $(BUILDDIR)/pickle + @echo + @echo "Build finished; now you can process the pickle files." + +json: + $(SPHINXBUILD) -b json $(ALLSPHINXOPTS) $(BUILDDIR)/json + @echo + @echo "Build finished; now you can process the JSON files." + +htmlhelp: + $(SPHINXBUILD) -b htmlhelp $(ALLSPHINXOPTS) $(BUILDDIR)/htmlhelp + @echo + @echo "Build finished; now you can run HTML Help Workshop with the" \ + ".hhp project file in $(BUILDDIR)/htmlhelp." + +qthelp: + $(SPHINXBUILD) -b qthelp $(ALLSPHINXOPTS) $(BUILDDIR)/qthelp + @echo + @echo "Build finished; now you can run "qcollectiongenerator" with the" \ + ".qhcp project file in $(BUILDDIR)/qthelp, like this:" + @echo "# qcollectiongenerator $(BUILDDIR)/qthelp/GerberTools.qhcp" + @echo "To view the help file:" + @echo "# assistant -collectionFile $(BUILDDIR)/qthelp/GerberTools.qhc" + +devhelp: + $(SPHINXBUILD) -b devhelp $(ALLSPHINXOPTS) $(BUILDDIR)/devhelp + @echo + @echo "Build finished." + @echo "To view the help file:" + @echo "# mkdir -p $$HOME/.local/share/devhelp/GerberTools" + @echo "# ln -s $(BUILDDIR)/devhelp $$HOME/.local/share/devhelp/GerberTools" + @echo "# devhelp" + +epub: + $(SPHINXBUILD) -b epub $(ALLSPHINXOPTS) $(BUILDDIR)/epub + @echo + @echo "Build finished. The epub file is in $(BUILDDIR)/epub." + +latex: + $(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex + @echo + @echo "Build finished; the LaTeX files are in $(BUILDDIR)/latex." + @echo "Run \`make' in that directory to run these through (pdf)latex" \ + "(use \`make latexpdf' here to do that automatically)." + +latexpdf: + $(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex + @echo "Running LaTeX files through pdflatex..." + $(MAKE) -C $(BUILDDIR)/latex all-pdf + @echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex." + +latexpdfja: + $(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex + @echo "Running LaTeX files through platex and dvipdfmx..." + $(MAKE) -C $(BUILDDIR)/latex all-pdf-ja + @echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex." + +text: + $(SPHINXBUILD) -b text $(ALLSPHINXOPTS) $(BUILDDIR)/text + @echo + @echo "Build finished. The text files are in $(BUILDDIR)/text." + +man: + $(SPHINXBUILD) -b man $(ALLSPHINXOPTS) $(BUILDDIR)/man + @echo + @echo "Build finished. The manual pages are in $(BUILDDIR)/man." + +texinfo: + $(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo + @echo + @echo "Build finished. The Texinfo files are in $(BUILDDIR)/texinfo." + @echo "Run \`make' in that directory to run these through makeinfo" \ + "(use \`make info' here to do that automatically)." + +info: + $(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo + @echo "Running Texinfo files through makeinfo..." + make -C $(BUILDDIR)/texinfo info + @echo "makeinfo finished; the Info files are in $(BUILDDIR)/texinfo." + +gettext: + $(SPHINXBUILD) -b gettext $(I18NSPHINXOPTS) $(BUILDDIR)/locale + @echo + @echo "Build finished. The message catalogs are in $(BUILDDIR)/locale." + +changes: + $(SPHINXBUILD) -b changes $(ALLSPHINXOPTS) $(BUILDDIR)/changes + @echo + @echo "The overview file is in $(BUILDDIR)/changes." + +linkcheck: + $(SPHINXBUILD) -b linkcheck $(ALLSPHINXOPTS) $(BUILDDIR)/linkcheck + @echo + @echo "Link check complete; look for any errors in the above output " \ + "or in $(BUILDDIR)/linkcheck/output.txt." + +doctest: + $(SPHINXBUILD) -b doctest $(ALLSPHINXOPTS) $(BUILDDIR)/doctest + @echo "Testing of doctests in the sources finished, look at the " \ + "results in $(BUILDDIR)/doctest/output.txt." + +xml: + $(SPHINXBUILD) -b xml $(ALLSPHINXOPTS) $(BUILDDIR)/xml + @echo + @echo "Build finished. The XML files are in $(BUILDDIR)/xml." + +pseudoxml: + $(SPHINXBUILD) -b pseudoxml $(ALLSPHINXOPTS) $(BUILDDIR)/pseudoxml + @echo + @echo "Build finished. The pseudo-XML files are in $(BUILDDIR)/pseudoxml." diff --git a/doc/make.bat b/doc/make.bat new file mode 100644 index 0000000..2860659 --- /dev/null +++ b/doc/make.bat @@ -0,0 +1,242 @@ +@ECHO OFF + +REM Command file for Sphinx documentation + +if "%SPHINXBUILD%" == "" ( + set SPHINXBUILD=sphinx-build +) +set BUILDDIR=build +set ALLSPHINXOPTS=-d %BUILDDIR%/doctrees %SPHINXOPTS% source +set I18NSPHINXOPTS=%SPHINXOPTS% source +if NOT "%PAPER%" == "" ( + set ALLSPHINXOPTS=-D latex_paper_size=%PAPER% %ALLSPHINXOPTS% + set I18NSPHINXOPTS=-D latex_paper_size=%PAPER% %I18NSPHINXOPTS% +) + +if "%1" == "" goto help + +if "%1" == "help" ( + :help + echo.Please use `make ^` where ^ is one of + echo. html to make standalone HTML files + echo. dirhtml to make HTML files named index.html in directories + echo. singlehtml to make a single large HTML file + echo. pickle to make pickle files + echo. json to make JSON files + echo. htmlhelp to make HTML files and a HTML help project + echo. qthelp to make HTML files and a qthelp project + echo. devhelp to make HTML files and a Devhelp project + echo. epub to make an epub + echo. latex to make LaTeX files, you can set PAPER=a4 or PAPER=letter + echo. text to make text files + echo. man to make manual pages + echo. texinfo to make Texinfo files + echo. gettext to make PO message catalogs + echo. changes to make an overview over all changed/added/deprecated items + echo. xml to make Docutils-native XML files + echo. pseudoxml to make pseudoxml-XML files for display purposes + echo. linkcheck to check all external links for integrity + echo. doctest to run all doctests embedded in the documentation if enabled + goto end +) + +if "%1" == "clean" ( + for /d %%i in (%BUILDDIR%\*) do rmdir /q /s %%i + del /q /s %BUILDDIR%\* + goto end +) + + +%SPHINXBUILD% 2> nul +if errorlevel 9009 ( + echo. + echo.The 'sphinx-build' command was not found. Make sure you have Sphinx + echo.installed, then set the SPHINXBUILD environment variable to point + echo.to the full path of the 'sphinx-build' executable. Alternatively you + echo.may add the Sphinx directory to PATH. + echo. + echo.If you don't have Sphinx installed, grab it from + echo.http://sphinx-doc.org/ + exit /b 1 +) + +if "%1" == "html" ( + %SPHINXBUILD% -b html %ALLSPHINXOPTS% %BUILDDIR%/html + if errorlevel 1 exit /b 1 + echo. + echo.Build finished. The HTML pages are in %BUILDDIR%/html. + goto end +) + +if "%1" == "dirhtml" ( + %SPHINXBUILD% -b dirhtml %ALLSPHINXOPTS% %BUILDDIR%/dirhtml + if errorlevel 1 exit /b 1 + echo. + echo.Build finished. The HTML pages are in %BUILDDIR%/dirhtml. + goto end +) + +if "%1" == "singlehtml" ( + %SPHINXBUILD% -b singlehtml %ALLSPHINXOPTS% %BUILDDIR%/singlehtml + if errorlevel 1 exit /b 1 + echo. + echo.Build finished. The HTML pages are in %BUILDDIR%/singlehtml. + goto end +) + +if "%1" == "pickle" ( + %SPHINXBUILD% -b pickle %ALLSPHINXOPTS% %BUILDDIR%/pickle + if errorlevel 1 exit /b 1 + echo. + echo.Build finished; now you can process the pickle files. + goto end +) + +if "%1" == "json" ( + %SPHINXBUILD% -b json %ALLSPHINXOPTS% %BUILDDIR%/json + if errorlevel 1 exit /b 1 + echo. + echo.Build finished; now you can process the JSON files. + goto end +) + +if "%1" == "htmlhelp" ( + %SPHINXBUILD% -b htmlhelp %ALLSPHINXOPTS% %BUILDDIR%/htmlhelp + if errorlevel 1 exit /b 1 + echo. + echo.Build finished; now you can run HTML Help Workshop with the ^ +.hhp project file in %BUILDDIR%/htmlhelp. + goto end +) + +if "%1" == "qthelp" ( + %SPHINXBUILD% -b qthelp %ALLSPHINXOPTS% %BUILDDIR%/qthelp + if errorlevel 1 exit /b 1 + echo. + echo.Build finished; now you can run "qcollectiongenerator" with the ^ +.qhcp project file in %BUILDDIR%/qthelp, like this: + echo.^> qcollectiongenerator %BUILDDIR%\qthelp\GerberTools.qhcp + echo.To view the help file: + echo.^> assistant -collectionFile %BUILDDIR%\qthelp\GerberTools.ghc + goto end +) + +if "%1" == "devhelp" ( + %SPHINXBUILD% -b devhelp %ALLSPHINXOPTS% %BUILDDIR%/devhelp + if errorlevel 1 exit /b 1 + echo. + echo.Build finished. + goto end +) + +if "%1" == "epub" ( + %SPHINXBUILD% -b epub %ALLSPHINXOPTS% %BUILDDIR%/epub + if errorlevel 1 exit /b 1 + echo. + echo.Build finished. The epub file is in %BUILDDIR%/epub. + goto end +) + +if "%1" == "latex" ( + %SPHINXBUILD% -b latex %ALLSPHINXOPTS% %BUILDDIR%/latex + if errorlevel 1 exit /b 1 + echo. + echo.Build finished; the LaTeX files are in %BUILDDIR%/latex. + goto end +) + +if "%1" == "latexpdf" ( + %SPHINXBUILD% -b latex %ALLSPHINXOPTS% %BUILDDIR%/latex + cd %BUILDDIR%/latex + make all-pdf + cd %BUILDDIR%/.. + echo. + echo.Build finished; the PDF files are in %BUILDDIR%/latex. + goto end +) + +if "%1" == "latexpdfja" ( + %SPHINXBUILD% -b latex %ALLSPHINXOPTS% %BUILDDIR%/latex + cd %BUILDDIR%/latex + make all-pdf-ja + cd %BUILDDIR%/.. + echo. + echo.Build finished; the PDF files are in %BUILDDIR%/latex. + goto end +) + +if "%1" == "text" ( + %SPHINXBUILD% -b text %ALLSPHINXOPTS% %BUILDDIR%/text + if errorlevel 1 exit /b 1 + echo. + echo.Build finished. The text files are in %BUILDDIR%/text. + goto end +) + +if "%1" == "man" ( + %SPHINXBUILD% -b man %ALLSPHINXOPTS% %BUILDDIR%/man + if errorlevel 1 exit /b 1 + echo. + echo.Build finished. The manual pages are in %BUILDDIR%/man. + goto end +) + +if "%1" == "texinfo" ( + %SPHINXBUILD% -b texinfo %ALLSPHINXOPTS% %BUILDDIR%/texinfo + if errorlevel 1 exit /b 1 + echo. + echo.Build finished. The Texinfo files are in %BUILDDIR%/texinfo. + goto end +) + +if "%1" == "gettext" ( + %SPHINXBUILD% -b gettext %I18NSPHINXOPTS% %BUILDDIR%/locale + if errorlevel 1 exit /b 1 + echo. + echo.Build finished. The message catalogs are in %BUILDDIR%/locale. + goto end +) + +if "%1" == "changes" ( + %SPHINXBUILD% -b changes %ALLSPHINXOPTS% %BUILDDIR%/changes + if errorlevel 1 exit /b 1 + echo. + echo.The overview file is in %BUILDDIR%/changes. + goto end +) + +if "%1" == "linkcheck" ( + %SPHINXBUILD% -b linkcheck %ALLSPHINXOPTS% %BUILDDIR%/linkcheck + if errorlevel 1 exit /b 1 + echo. + echo.Link check complete; look for any errors in the above output ^ +or in %BUILDDIR%/linkcheck/output.txt. + goto end +) + +if "%1" == "doctest" ( + %SPHINXBUILD% -b doctest %ALLSPHINXOPTS% %BUILDDIR%/doctest + if errorlevel 1 exit /b 1 + echo. + echo.Testing of doctests in the sources finished, look at the ^ +results in %BUILDDIR%/doctest/output.txt. + goto end +) + +if "%1" == "xml" ( + %SPHINXBUILD% -b xml %ALLSPHINXOPTS% %BUILDDIR%/xml + if errorlevel 1 exit /b 1 + echo. + echo.Build finished. The XML files are in %BUILDDIR%/xml. + goto end +) + +if "%1" == "pseudoxml" ( + %SPHINXBUILD% -b pseudoxml %ALLSPHINXOPTS% %BUILDDIR%/pseudoxml + if errorlevel 1 exit /b 1 + echo. + echo.Build finished. The pseudo-XML files are in %BUILDDIR%/pseudoxml. + goto end +) + +:end diff --git a/doc/source/conf.py b/doc/source/conf.py new file mode 100644 index 0000000..bf45678 --- /dev/null +++ b/doc/source/conf.py @@ -0,0 +1,260 @@ +# -*- coding: utf-8 -*- +# +# Gerber Tools documentation build configuration file, created by +# sphinx-quickstart on Sun Sep 28 18:16:46 2014. +# +# This file is execfile()d with the current directory set to its +# containing dir. +# +# Note that not all possible configuration values are present in this +# autogenerated file. +# +# All configuration values have a default; values that are commented out +# serve to show the default. + +import sys +import os + +# If extensions (or modules to document with autodoc) are in another directory, +# add these directories to sys.path here. If the directory is relative to the +# documentation root, use os.path.abspath to make it absolute, like shown here. +sys.path.insert(0, os.path.abspath('../../')) + +# -- General configuration ------------------------------------------------ + +# If your documentation needs a minimal Sphinx version, state it here. +#needs_sphinx = '1.0' + +# Add any Sphinx extension module names here, as strings. They can be +# extensions coming with Sphinx (named 'sphinx.ext.*') or your custom +# ones. +extensions = [ + 'sphinx.ext.autodoc', +] + +# Add any paths that contain templates here, relative to this directory. +templates_path = ['_templates'] + +# The suffix of source filenames. +source_suffix = '.rst' + +# The encoding of source files. +#source_encoding = 'utf-8-sig' + +# The master toctree document. +master_doc = 'index' + +# General information about the project. +project = u'Gerber Tools' +copyright = u'2014, Hamilton Kibbe' + +# The version info for the project you're documenting, acts as replacement for +# |version| and |release|, also used in various other places throughout the +# built documents. +# +# The short X.Y version. +version = '0.1' +# The full version, including alpha/beta/rc tags. +release = '0.1' + +# The language for content autogenerated by Sphinx. Refer to documentation +# for a list of supported languages. +#language = None + +# There are two options for replacing |today|: either, you set today to some +# non-false value, then it is used: +#today = '' +# Else, today_fmt is used as the format for a strftime call. +#today_fmt = '%B %d, %Y' + +# List of patterns, relative to source directory, that match files and +# directories to ignore when looking for source files. +exclude_patterns = [] + +# The reST default role (used for this markup: `text`) to use for all +# documents. +#default_role = None + +# If true, '()' will be appended to :func: etc. cross-reference text. +#add_function_parentheses = True + +# If true, the current module name will be prepended to all description +# unit titles (such as .. function::). +#add_module_names = True + +# If true, sectionauthor and moduleauthor directives will be shown in the +# output. They are ignored by default. +#show_authors = False + +# The name of the Pygments (syntax highlighting) style to use. +pygments_style = 'sphinx' + +# A list of ignored prefixes for module index sorting. +#modindex_common_prefix = [] + +# If true, keep warnings as "system message" paragraphs in the built documents. +#keep_warnings = False + + +# -- Options for HTML output ---------------------------------------------- + +# The theme to use for HTML and HTML Help pages. See the documentation for +# a list of builtin themes. +html_theme = 'default' + +# Theme options are theme-specific and customize the look and feel of a theme +# further. For a list of options available for each theme, see the +# documentation. +#html_theme_options = {} + +# Add any paths that contain custom themes here, relative to this directory. +#html_theme_path = [] + +# The name for this set of Sphinx documents. If None, it defaults to +# " v documentation". +#html_title = None + +# A shorter title for the navigation bar. Default is the same as html_title. +#html_short_title = None + +# The name of an image file (relative to this directory) to place at the top +# of the sidebar. +#html_logo = None + +# The name of an image file (within the static path) to use as favicon of the +# docs. This file should be a Windows icon file (.ico) being 16x16 or 32x32 +# pixels large. +#html_favicon = None + +# Add any paths that contain custom static files (such as style sheets) here, +# relative to this directory. They are copied after the builtin static files, +# so a file named "default.css" will overwrite the builtin "default.css". +html_static_path = ['_static'] + +# Add any extra paths that contain custom files (such as robots.txt or +# .htaccess) here, relative to this directory. These files are copied +# directly to the root of the documentation. +#html_extra_path = [] + +# If not '', a 'Last updated on:' timestamp is inserted at every page bottom, +# using the given strftime format. +#html_last_updated_fmt = '%b %d, %Y' + +# If true, SmartyPants will be used to convert quotes and dashes to +# typographically correct entities. +#html_use_smartypants = True + +# Custom sidebar templates, maps document names to template names. +#html_sidebars = {} + +# Additional templates that should be rendered to pages, maps page names to +# template names. +#html_additional_pages = {} + +# If false, no module index is generated. +#html_domain_indices = True + +# If false, no index is generated. +#html_use_index = True + +# If true, the index is split into individual pages for each letter. +#html_split_index = False + +# If true, links to the reST sources are added to the pages. +#html_show_sourcelink = True + +# If true, "Created using Sphinx" is shown in the HTML footer. Default is True. +#html_show_sphinx = True + +# If true, "(C) Copyright ..." is shown in the HTML footer. Default is True. +#html_show_copyright = True + +# If true, an OpenSearch description file will be output, and all pages will +# contain a tag referring to it. The value of this option must be the +# base URL from which the finished HTML is served. +#html_use_opensearch = '' + +# This is the file name suffix for HTML files (e.g. ".xhtml"). +#html_file_suffix = None + +# Output file base name for HTML help builder. +htmlhelp_basename = 'GerberToolsdoc' + + +# -- Options for LaTeX output --------------------------------------------- + +latex_elements = { +# The paper size ('letterpaper' or 'a4paper'). +#'papersize': 'letterpaper', + +# The font size ('10pt', '11pt' or '12pt'). +#'pointsize': '10pt', + +# Additional stuff for the LaTeX preamble. +#'preamble': '', +} + +# Grouping the document tree into LaTeX files. List of tuples +# (source start file, target name, title, +# author, documentclass [howto, manual, or own class]). +latex_documents = [ + ('index', 'GerberTools.tex', u'Gerber Tools Documentation', + u'Hamilton Kibbe', 'manual'), +] + +# The name of an image file (relative to this directory) to place at the top of +# the title page. +#latex_logo = None + +# For "manual" documents, if this is true, then toplevel headings are parts, +# not chapters. +#latex_use_parts = False + +# If true, show page references after internal links. +#latex_show_pagerefs = False + +# If true, show URL addresses after external links. +#latex_show_urls = False + +# Documents to append as an appendix to all manuals. +#latex_appendices = [] + +# If false, no module index is generated. +#latex_domain_indices = True + + +# -- Options for manual page output --------------------------------------- + +# One entry per manual page. List of tuples +# (source start file, name, description, authors, manual section). +man_pages = [ + ('index', 'gerbertools', u'Gerber Tools Documentation', + [u'Hamilton Kibbe'], 1) +] + +# If true, show URL addresses after external links. +#man_show_urls = False + + +# -- Options for Texinfo output ------------------------------------------- + +# Grouping the document tree into Texinfo files. List of tuples +# (source start file, target name, title, author, +# dir menu entry, description, category) +texinfo_documents = [ + ('index', 'GerberTools', u'Gerber Tools Documentation', + u'Hamilton Kibbe', 'GerberTools', 'One line description of project.', + 'Miscellaneous'), +] + +# Documents to append as an appendix to all manuals. +#texinfo_appendices = [] + +# If false, no module index is generated. +#texinfo_domain_indices = True + +# How to display URL addresses: 'footnote', 'no', or 'inline'. +#texinfo_show_urls = 'footnote' + +# If true, do not generate a @detailmenu in the "Top" node's menu. +#texinfo_no_detailmenu = False diff --git a/doc/source/index.rst b/doc/source/index.rst new file mode 100644 index 0000000..ac28b5b --- /dev/null +++ b/doc/source/index.rst @@ -0,0 +1,29 @@ +.. Gerber Tools documentation master file, created by + sphinx-quickstart on Sun Sep 28 18:16:46 2014. + You can adapt this file completely to your liking, but it should at least + contain the root `toctree` directive. + +Welcome to Gerber Tools's documentation! +======================================== + +Contents: + +.. toctree:: + :maxdepth: 2 + +.. automodule:: gerber.gerber + :members: + +.. automodule:: gerber.statements + :members: + +.. automodule:: gerber.utils + :members: + +Indices and tables +================== + +* :ref:`genindex` +* :ref:`modindex` +* :ref:`search` + -- cgit From 0b8e2e4b8b552e90d55eabe39aefba0b5b3daef5 Mon Sep 17 00:00:00 2001 From: Hamilton Kibbe Date: Wed, 1 Oct 2014 14:39:32 -0400 Subject: added numpydoc --- doc/source/conf.py | 521 ++++++++++++++++++++++++++------------------------- doc/source/index.rst | 67 ++++--- 2 files changed, 299 insertions(+), 289 deletions(-) (limited to 'doc') diff --git a/doc/source/conf.py b/doc/source/conf.py index bf45678..0a3cfc1 100644 --- a/doc/source/conf.py +++ b/doc/source/conf.py @@ -1,260 +1,261 @@ -# -*- coding: utf-8 -*- -# -# Gerber Tools documentation build configuration file, created by -# sphinx-quickstart on Sun Sep 28 18:16:46 2014. -# -# This file is execfile()d with the current directory set to its -# containing dir. -# -# Note that not all possible configuration values are present in this -# autogenerated file. -# -# All configuration values have a default; values that are commented out -# serve to show the default. - -import sys -import os - -# If extensions (or modules to document with autodoc) are in another directory, -# add these directories to sys.path here. If the directory is relative to the -# documentation root, use os.path.abspath to make it absolute, like shown here. -sys.path.insert(0, os.path.abspath('../../')) - -# -- General configuration ------------------------------------------------ - -# If your documentation needs a minimal Sphinx version, state it here. -#needs_sphinx = '1.0' - -# Add any Sphinx extension module names here, as strings. They can be -# extensions coming with Sphinx (named 'sphinx.ext.*') or your custom -# ones. -extensions = [ - 'sphinx.ext.autodoc', -] - -# Add any paths that contain templates here, relative to this directory. -templates_path = ['_templates'] - -# The suffix of source filenames. -source_suffix = '.rst' - -# The encoding of source files. -#source_encoding = 'utf-8-sig' - -# The master toctree document. -master_doc = 'index' - -# General information about the project. -project = u'Gerber Tools' -copyright = u'2014, Hamilton Kibbe' - -# The version info for the project you're documenting, acts as replacement for -# |version| and |release|, also used in various other places throughout the -# built documents. -# -# The short X.Y version. -version = '0.1' -# The full version, including alpha/beta/rc tags. -release = '0.1' - -# The language for content autogenerated by Sphinx. Refer to documentation -# for a list of supported languages. -#language = None - -# There are two options for replacing |today|: either, you set today to some -# non-false value, then it is used: -#today = '' -# Else, today_fmt is used as the format for a strftime call. -#today_fmt = '%B %d, %Y' - -# List of patterns, relative to source directory, that match files and -# directories to ignore when looking for source files. -exclude_patterns = [] - -# The reST default role (used for this markup: `text`) to use for all -# documents. -#default_role = None - -# If true, '()' will be appended to :func: etc. cross-reference text. -#add_function_parentheses = True - -# If true, the current module name will be prepended to all description -# unit titles (such as .. function::). -#add_module_names = True - -# If true, sectionauthor and moduleauthor directives will be shown in the -# output. They are ignored by default. -#show_authors = False - -# The name of the Pygments (syntax highlighting) style to use. -pygments_style = 'sphinx' - -# A list of ignored prefixes for module index sorting. -#modindex_common_prefix = [] - -# If true, keep warnings as "system message" paragraphs in the built documents. -#keep_warnings = False - - -# -- Options for HTML output ---------------------------------------------- - -# The theme to use for HTML and HTML Help pages. See the documentation for -# a list of builtin themes. -html_theme = 'default' - -# Theme options are theme-specific and customize the look and feel of a theme -# further. For a list of options available for each theme, see the -# documentation. -#html_theme_options = {} - -# Add any paths that contain custom themes here, relative to this directory. -#html_theme_path = [] - -# The name for this set of Sphinx documents. If None, it defaults to -# " v documentation". -#html_title = None - -# A shorter title for the navigation bar. Default is the same as html_title. -#html_short_title = None - -# The name of an image file (relative to this directory) to place at the top -# of the sidebar. -#html_logo = None - -# The name of an image file (within the static path) to use as favicon of the -# docs. This file should be a Windows icon file (.ico) being 16x16 or 32x32 -# pixels large. -#html_favicon = None - -# Add any paths that contain custom static files (such as style sheets) here, -# relative to this directory. They are copied after the builtin static files, -# so a file named "default.css" will overwrite the builtin "default.css". -html_static_path = ['_static'] - -# Add any extra paths that contain custom files (such as robots.txt or -# .htaccess) here, relative to this directory. These files are copied -# directly to the root of the documentation. -#html_extra_path = [] - -# If not '', a 'Last updated on:' timestamp is inserted at every page bottom, -# using the given strftime format. -#html_last_updated_fmt = '%b %d, %Y' - -# If true, SmartyPants will be used to convert quotes and dashes to -# typographically correct entities. -#html_use_smartypants = True - -# Custom sidebar templates, maps document names to template names. -#html_sidebars = {} - -# Additional templates that should be rendered to pages, maps page names to -# template names. -#html_additional_pages = {} - -# If false, no module index is generated. -#html_domain_indices = True - -# If false, no index is generated. -#html_use_index = True - -# If true, the index is split into individual pages for each letter. -#html_split_index = False - -# If true, links to the reST sources are added to the pages. -#html_show_sourcelink = True - -# If true, "Created using Sphinx" is shown in the HTML footer. Default is True. -#html_show_sphinx = True - -# If true, "(C) Copyright ..." is shown in the HTML footer. Default is True. -#html_show_copyright = True - -# If true, an OpenSearch description file will be output, and all pages will -# contain a tag referring to it. The value of this option must be the -# base URL from which the finished HTML is served. -#html_use_opensearch = '' - -# This is the file name suffix for HTML files (e.g. ".xhtml"). -#html_file_suffix = None - -# Output file base name for HTML help builder. -htmlhelp_basename = 'GerberToolsdoc' - - -# -- Options for LaTeX output --------------------------------------------- - -latex_elements = { -# The paper size ('letterpaper' or 'a4paper'). -#'papersize': 'letterpaper', - -# The font size ('10pt', '11pt' or '12pt'). -#'pointsize': '10pt', - -# Additional stuff for the LaTeX preamble. -#'preamble': '', -} - -# Grouping the document tree into LaTeX files. List of tuples -# (source start file, target name, title, -# author, documentclass [howto, manual, or own class]). -latex_documents = [ - ('index', 'GerberTools.tex', u'Gerber Tools Documentation', - u'Hamilton Kibbe', 'manual'), -] - -# The name of an image file (relative to this directory) to place at the top of -# the title page. -#latex_logo = None - -# For "manual" documents, if this is true, then toplevel headings are parts, -# not chapters. -#latex_use_parts = False - -# If true, show page references after internal links. -#latex_show_pagerefs = False - -# If true, show URL addresses after external links. -#latex_show_urls = False - -# Documents to append as an appendix to all manuals. -#latex_appendices = [] - -# If false, no module index is generated. -#latex_domain_indices = True - - -# -- Options for manual page output --------------------------------------- - -# One entry per manual page. List of tuples -# (source start file, name, description, authors, manual section). -man_pages = [ - ('index', 'gerbertools', u'Gerber Tools Documentation', - [u'Hamilton Kibbe'], 1) -] - -# If true, show URL addresses after external links. -#man_show_urls = False - - -# -- Options for Texinfo output ------------------------------------------- - -# Grouping the document tree into Texinfo files. List of tuples -# (source start file, target name, title, author, -# dir menu entry, description, category) -texinfo_documents = [ - ('index', 'GerberTools', u'Gerber Tools Documentation', - u'Hamilton Kibbe', 'GerberTools', 'One line description of project.', - 'Miscellaneous'), -] - -# Documents to append as an appendix to all manuals. -#texinfo_appendices = [] - -# If false, no module index is generated. -#texinfo_domain_indices = True - -# How to display URL addresses: 'footnote', 'no', or 'inline'. -#texinfo_show_urls = 'footnote' - -# If true, do not generate a @detailmenu in the "Top" node's menu. -#texinfo_no_detailmenu = False +# -*- coding: utf-8 -*- +# +# Gerber Tools documentation build configuration file, created by +# sphinx-quickstart on Sun Sep 28 18:16:46 2014. +# +# This file is execfile()d with the current directory set to its +# containing dir. +# +# Note that not all possible configuration values are present in this +# autogenerated file. +# +# All configuration values have a default; values that are commented out +# serve to show the default. + +import sys +import os + +# If extensions (or modules to document with autodoc) are in another directory, +# add these directories to sys.path here. If the directory is relative to the +# documentation root, use os.path.abspath to make it absolute, like shown here. +sys.path.insert(0, os.path.abspath('../../')) + +# -- General configuration ------------------------------------------------ + +# If your documentation needs a minimal Sphinx version, state it here. +#needs_sphinx = '1.0' + +# Add any Sphinx extension module names here, as strings. They can be +# extensions coming with Sphinx (named 'sphinx.ext.*') or your custom +# ones. +extensions = [ + 'sphinx.ext.autodoc', + 'numpydoc', +] + +# Add any paths that contain templates here, relative to this directory. +templates_path = ['_templates'] + +# The suffix of source filenames. +source_suffix = '.rst' + +# The encoding of source files. +#source_encoding = 'utf-8-sig' + +# The master toctree document. +master_doc = 'index' + +# General information about the project. +project = u'Gerber Tools' +copyright = u'2014, Hamilton Kibbe' + +# The version info for the project you're documenting, acts as replacement for +# |version| and |release|, also used in various other places throughout the +# built documents. +# +# The short X.Y version. +version = '0.1' +# The full version, including alpha/beta/rc tags. +release = '0.1' + +# The language for content autogenerated by Sphinx. Refer to documentation +# for a list of supported languages. +#language = None + +# There are two options for replacing |today|: either, you set today to some +# non-false value, then it is used: +#today = '' +# Else, today_fmt is used as the format for a strftime call. +#today_fmt = '%B %d, %Y' + +# List of patterns, relative to source directory, that match files and +# directories to ignore when looking for source files. +exclude_patterns = [] + +# The reST default role (used for this markup: `text`) to use for all +# documents. +#default_role = None + +# If true, '()' will be appended to :func: etc. cross-reference text. +#add_function_parentheses = True + +# If true, the current module name will be prepended to all description +# unit titles (such as .. function::). +#add_module_names = True + +# If true, sectionauthor and moduleauthor directives will be shown in the +# output. They are ignored by default. +#show_authors = False + +# The name of the Pygments (syntax highlighting) style to use. +pygments_style = 'sphinx' + +# A list of ignored prefixes for module index sorting. +#modindex_common_prefix = [] + +# If true, keep warnings as "system message" paragraphs in the built documents. +#keep_warnings = False + + +# -- Options for HTML output ---------------------------------------------- + +# The theme to use for HTML and HTML Help pages. See the documentation for +# a list of builtin themes. +html_theme = 'default' + +# Theme options are theme-specific and customize the look and feel of a theme +# further. For a list of options available for each theme, see the +# documentation. +#html_theme_options = {} + +# Add any paths that contain custom themes here, relative to this directory. +#html_theme_path = [] + +# The name for this set of Sphinx documents. If None, it defaults to +# " v documentation". +#html_title = None + +# A shorter title for the navigation bar. Default is the same as html_title. +#html_short_title = None + +# The name of an image file (relative to this directory) to place at the top +# of the sidebar. +#html_logo = None + +# The name of an image file (within the static path) to use as favicon of the +# docs. This file should be a Windows icon file (.ico) being 16x16 or 32x32 +# pixels large. +#html_favicon = None + +# Add any paths that contain custom static files (such as style sheets) here, +# relative to this directory. They are copied after the builtin static files, +# so a file named "default.css" will overwrite the builtin "default.css". +html_static_path = ['_static'] + +# Add any extra paths that contain custom files (such as robots.txt or +# .htaccess) here, relative to this directory. These files are copied +# directly to the root of the documentation. +#html_extra_path = [] + +# If not '', a 'Last updated on:' timestamp is inserted at every page bottom, +# using the given strftime format. +#html_last_updated_fmt = '%b %d, %Y' + +# If true, SmartyPants will be used to convert quotes and dashes to +# typographically correct entities. +#html_use_smartypants = True + +# Custom sidebar templates, maps document names to template names. +#html_sidebars = {} + +# Additional templates that should be rendered to pages, maps page names to +# template names. +#html_additional_pages = {} + +# If false, no module index is generated. +#html_domain_indices = True + +# If false, no index is generated. +#html_use_index = True + +# If true, the index is split into individual pages for each letter. +#html_split_index = False + +# If true, links to the reST sources are added to the pages. +#html_show_sourcelink = True + +# If true, "Created using Sphinx" is shown in the HTML footer. Default is True. +#html_show_sphinx = True + +# If true, "(C) Copyright ..." is shown in the HTML footer. Default is True. +#html_show_copyright = True + +# If true, an OpenSearch description file will be output, and all pages will +# contain a tag referring to it. The value of this option must be the +# base URL from which the finished HTML is served. +#html_use_opensearch = '' + +# This is the file name suffix for HTML files (e.g. ".xhtml"). +#html_file_suffix = None + +# Output file base name for HTML help builder. +htmlhelp_basename = 'GerberToolsdoc' + + +# -- Options for LaTeX output --------------------------------------------- + +latex_elements = { +# The paper size ('letterpaper' or 'a4paper'). +#'papersize': 'letterpaper', + +# The font size ('10pt', '11pt' or '12pt'). +#'pointsize': '10pt', + +# Additional stuff for the LaTeX preamble. +#'preamble': '', +} + +# Grouping the document tree into LaTeX files. List of tuples +# (source start file, target name, title, +# author, documentclass [howto, manual, or own class]). +latex_documents = [ + ('index', 'GerberTools.tex', u'Gerber Tools Documentation', + u'Hamilton Kibbe', 'manual'), +] + +# The name of an image file (relative to this directory) to place at the top of +# the title page. +#latex_logo = None + +# For "manual" documents, if this is true, then toplevel headings are parts, +# not chapters. +#latex_use_parts = False + +# If true, show page references after internal links. +#latex_show_pagerefs = False + +# If true, show URL addresses after external links. +#latex_show_urls = False + +# Documents to append as an appendix to all manuals. +#latex_appendices = [] + +# If false, no module index is generated. +#latex_domain_indices = True + + +# -- Options for manual page output --------------------------------------- + +# One entry per manual page. List of tuples +# (source start file, name, description, authors, manual section). +man_pages = [ + ('index', 'gerbertools', u'Gerber Tools Documentation', + [u'Hamilton Kibbe'], 1) +] + +# If true, show URL addresses after external links. +#man_show_urls = False + + +# -- Options for Texinfo output ------------------------------------------- + +# Grouping the document tree into Texinfo files. List of tuples +# (source start file, target name, title, author, +# dir menu entry, description, category) +texinfo_documents = [ + ('index', 'GerberTools', u'Gerber Tools Documentation', + u'Hamilton Kibbe', 'GerberTools', 'One line description of project.', + 'Miscellaneous'), +] + +# Documents to append as an appendix to all manuals. +#texinfo_appendices = [] + +# If false, no module index is generated. +#texinfo_domain_indices = True + +# How to display URL addresses: 'footnote', 'no', or 'inline'. +#texinfo_show_urls = 'footnote' + +# If true, do not generate a @detailmenu in the "Top" node's menu. +#texinfo_no_detailmenu = False diff --git a/doc/source/index.rst b/doc/source/index.rst index ac28b5b..a5916f7 100644 --- a/doc/source/index.rst +++ b/doc/source/index.rst @@ -1,29 +1,38 @@ -.. Gerber Tools documentation master file, created by - sphinx-quickstart on Sun Sep 28 18:16:46 2014. - You can adapt this file completely to your liking, but it should at least - contain the root `toctree` directive. - -Welcome to Gerber Tools's documentation! -======================================== - -Contents: - -.. toctree:: - :maxdepth: 2 - -.. automodule:: gerber.gerber - :members: - -.. automodule:: gerber.statements - :members: - -.. automodule:: gerber.utils - :members: - -Indices and tables -================== - -* :ref:`genindex` -* :ref:`modindex` -* :ref:`search` - +.. Gerber Tools documentation master file, created by + sphinx-quickstart on Sun Sep 28 18:16:46 2014. + You can adapt this file completely to your liking, but it should at least + contain the root `toctree` directive. + +Welcome to Gerber Tools's documentation! +======================================== + +Contents: + +.. toctree:: + :maxdepth: 2 + +.. automodule:: gerber + :members: + +.. automodule:: gerber.gerber + :members: + +.. automodule:: gerber.excellon + :members: + +.. automodule:: gerber.cnc + :members: + +.. automodule:: gerber.statements + :members: + +.. automodule:: gerber.utils + :members: + +Indices and tables +================== + +* :ref:`genindex` +* :ref:`modindex` +* :ref:`search` + -- cgit From f2f411493ea303075d5dbdd7656c572dda61cf67 Mon Sep 17 00:00:00 2001 From: Hamilton Kibbe Date: Thu, 9 Oct 2014 22:10:28 -0400 Subject: doc update --- doc/source/index.rst | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) (limited to 'doc') diff --git a/doc/source/index.rst b/doc/source/index.rst index a5916f7..763d04a 100644 --- a/doc/source/index.rst +++ b/doc/source/index.rst @@ -20,12 +20,18 @@ Contents: .. automodule:: gerber.excellon :members: -.. automodule:: gerber.cnc +.. automodule:: gerber.render.render :members: -.. automodule:: gerber.statements +.. automodule:: gerber.gerber_statements :members: - + +.. automodule:: gerber.excellon_statements + :members: + +.. automodule:: gerber.cnc + :members: + .. automodule:: gerber.utils :members: -- cgit From 62c689be172a7a06d76fd4b69c3443f3ec053765 Mon Sep 17 00:00:00 2001 From: Hamilton Kibbe Date: Sat, 11 Oct 2014 13:12:21 -0400 Subject: Doc update --- doc/source/conf.py | 1 + doc/source/documentation/excellon.rst | 42 +++++++++++++++++++++++++++++++++++ doc/source/documentation/gerber.rst | 36 ++++++++++++++++++++++++++++++ doc/source/documentation/index.rst | 11 +++++++++ doc/source/documentation/render.rst | 11 +++++++++ doc/source/index.rst | 29 ++++-------------------- doc/source/intro.rst | 19 ++++++++++++++++ 7 files changed, 124 insertions(+), 25 deletions(-) create mode 100644 doc/source/documentation/excellon.rst create mode 100644 doc/source/documentation/gerber.rst create mode 100644 doc/source/documentation/index.rst create mode 100644 doc/source/documentation/render.rst create mode 100644 doc/source/intro.rst (limited to 'doc') diff --git a/doc/source/conf.py b/doc/source/conf.py index 0a3cfc1..ac0fdf7 100644 --- a/doc/source/conf.py +++ b/doc/source/conf.py @@ -30,6 +30,7 @@ sys.path.insert(0, os.path.abspath('../../')) # ones. extensions = [ 'sphinx.ext.autodoc', + 'sphinx.ext.autosummary', 'numpydoc', ] diff --git a/doc/source/documentation/excellon.rst b/doc/source/documentation/excellon.rst new file mode 100644 index 0000000..7ac3b39 --- /dev/null +++ b/doc/source/documentation/excellon.rst @@ -0,0 +1,42 @@ +:mod:`excellon` --- Excellon file handling +============================================== + +.. module:: excellon + :synopsis: Functions and classes for handling Excellon files +.. sectionauthor:: Hamilton Kibbe + + +The Excellon format is the most common format for exporting PCB drill +information. The Excellon format is used to program CNC drilling macines for +drilling holes in PCBs. As such, excellon files are sometimes refererred to as +NC-drill files. The Excellon format reference is available +`here `_. The :mod:`excellon` +submodule implements calsses to read and write excellon files without having +to know the precise details of the format. + +The :mod:`excellon` submodule's :func:`read` function serves as a +simple interface for parsing excellon files. The :class:`ExcellonFile` class +stores all the information contained in an Excellon file allowing the file to +be analyzed, modified, and updated. The :class:`ExcellonParser` class is used +in the background for parsing RS-274X files. + +.. _excellon-contents: + +Functions +--------- +The :mod:`excellon` module defines the following functions: + +.. autofunction:: gerber.excellon.read + + +Classes +------- +The :mod:`excellon` module defines the following classes: + +.. autoclass:: gerber.excellon.ExcellonFile + :members: + + +.. autoclass:: gerber.excellon.ExcellonParser + :members: + \ No newline at end of file diff --git a/doc/source/documentation/gerber.rst b/doc/source/documentation/gerber.rst new file mode 100644 index 0000000..78870a9 --- /dev/null +++ b/doc/source/documentation/gerber.rst @@ -0,0 +1,36 @@ +:mod:`gerber` --- RS-274X file handling +============================================== + +.. module:: gerber + :synopsis: Functions and classes for handling RS-274X files +.. sectionauthor:: Hamilton Kibbe + + +The RS-274X (Gerber) format is the most common format for exporting PCB +artwork. The Specification is published by Ucamco and is available +`here `_. +The :mod:`gerber` submodule implements calsses to read and write +RS-274X files without having to know the precise details of the format. + +The :mod:`gerber` submodule's :func:`read` function serves as a +simple interface for parsing gerber files. The :class:`GerberFile` class +stores all the information contained in a gerber file allowing the file to be +analyzed, modified, and updated. The :class:`GerberParser` class is used in +the background for parsing RS-274X files. + +.. _gerber-contents: +Functions +--------- +The :mod:`gerber` module defines the following functions: + +.. autofunction:: gerber.gerber.read + +Classes +------- +The :mod:`gerber` module defines the following classes: + +.. autoclass:: gerber.gerber.GerberFile + :members: + +.. autoclass:: gerber.gerber.GerberParser + :members: \ No newline at end of file diff --git a/doc/source/documentation/index.rst b/doc/source/documentation/index.rst new file mode 100644 index 0000000..110df87 --- /dev/null +++ b/doc/source/documentation/index.rst @@ -0,0 +1,11 @@ +Gerber Tools Reference +====================== + +.. toctree:: + :maxdepth: 2 + + Gerber (RS-274X) Files + Excellon Files + Rendering + + diff --git a/doc/source/documentation/render.rst b/doc/source/documentation/render.rst new file mode 100644 index 0000000..324ef71 --- /dev/null +++ b/doc/source/documentation/render.rst @@ -0,0 +1,11 @@ +:mod:`render` --- Gerber file Rendering +============================================== + +.. module:: render + :synopsis: Functions and classes for handling Excellon files +.. sectionauthor:: Hamilton Kibbe + +Render Module +------------- +.. automodule:: gerber.render.render + :members: diff --git a/doc/source/index.rst b/doc/source/index.rst index 763d04a..aec8b48 100644 --- a/doc/source/index.rst +++ b/doc/source/index.rst @@ -3,37 +3,16 @@ You can adapt this file completely to your liking, but it should at least contain the root `toctree` directive. -Welcome to Gerber Tools's documentation! +Gerber-Tools! ======================================== Contents: .. toctree:: - :maxdepth: 2 - -.. automodule:: gerber - :members: - -.. automodule:: gerber.gerber - :members: - -.. automodule:: gerber.excellon - :members: - -.. automodule:: gerber.render.render - :members: - -.. automodule:: gerber.gerber_statements - :members: - -.. automodule:: gerber.excellon_statements - :members: - -.. automodule:: gerber.cnc - :members: + :maxdepth: 1 -.. automodule:: gerber.utils - :members: + intro + documentation/index Indices and tables ================== diff --git a/doc/source/intro.rst b/doc/source/intro.rst new file mode 100644 index 0000000..1982fc8 --- /dev/null +++ b/doc/source/intro.rst @@ -0,0 +1,19 @@ +Gerber Tools Intro +================== + +PCB CAM (Gerber) Files +------------ + +PCB design files (artwork) are most often stored in `Gerber` files. This is +a generic term that may refer to `RS-274X (Gerber) `_, +`ODB++ `_, or `Excellon `_ +files. + + +Gerber-Tools +------------ + +The gerber-tools module provides tools for working with and rendering Gerber +and Excellon files. + + -- cgit From 8c5c7ec8bbc8a074884ef04b566f9c0ecd6e78bb Mon Sep 17 00:00:00 2001 From: Hamilton Kibbe Date: Sun, 12 Oct 2014 12:38:40 -0400 Subject: update docs and example images --- doc/source/conf.py | 2 +- doc/source/documentation/gerber.rst | 36 ------------------------------------ doc/source/documentation/index.rst | 2 +- doc/source/documentation/rs274x.rst | 37 +++++++++++++++++++++++++++++++++++++ 4 files changed, 39 insertions(+), 38 deletions(-) delete mode 100644 doc/source/documentation/gerber.rst create mode 100644 doc/source/documentation/rs274x.rst (limited to 'doc') diff --git a/doc/source/conf.py b/doc/source/conf.py index ac0fdf7..a118546 100644 --- a/doc/source/conf.py +++ b/doc/source/conf.py @@ -86,7 +86,7 @@ exclude_patterns = [] # If true, sectionauthor and moduleauthor directives will be shown in the # output. They are ignored by default. -#show_authors = False +show_authors = False # The name of the Pygments (syntax highlighting) style to use. pygments_style = 'sphinx' diff --git a/doc/source/documentation/gerber.rst b/doc/source/documentation/gerber.rst deleted file mode 100644 index 78870a9..0000000 --- a/doc/source/documentation/gerber.rst +++ /dev/null @@ -1,36 +0,0 @@ -:mod:`gerber` --- RS-274X file handling -============================================== - -.. module:: gerber - :synopsis: Functions and classes for handling RS-274X files -.. sectionauthor:: Hamilton Kibbe - - -The RS-274X (Gerber) format is the most common format for exporting PCB -artwork. The Specification is published by Ucamco and is available -`here `_. -The :mod:`gerber` submodule implements calsses to read and write -RS-274X files without having to know the precise details of the format. - -The :mod:`gerber` submodule's :func:`read` function serves as a -simple interface for parsing gerber files. The :class:`GerberFile` class -stores all the information contained in a gerber file allowing the file to be -analyzed, modified, and updated. The :class:`GerberParser` class is used in -the background for parsing RS-274X files. - -.. _gerber-contents: -Functions ---------- -The :mod:`gerber` module defines the following functions: - -.. autofunction:: gerber.gerber.read - -Classes -------- -The :mod:`gerber` module defines the following classes: - -.. autoclass:: gerber.gerber.GerberFile - :members: - -.. autoclass:: gerber.gerber.GerberParser - :members: \ No newline at end of file diff --git a/doc/source/documentation/index.rst b/doc/source/documentation/index.rst index 110df87..3d8241a 100644 --- a/doc/source/documentation/index.rst +++ b/doc/source/documentation/index.rst @@ -4,7 +4,7 @@ Gerber Tools Reference .. toctree:: :maxdepth: 2 - Gerber (RS-274X) Files + Gerber (RS-274X) Files Excellon Files Rendering diff --git a/doc/source/documentation/rs274x.rst b/doc/source/documentation/rs274x.rst new file mode 100644 index 0000000..bc99519 --- /dev/null +++ b/doc/source/documentation/rs274x.rst @@ -0,0 +1,37 @@ +:mod:`rs274x` --- RS-274X file handling +============================================== + +.. module:: rs274x + :synopsis: Functions and classes for handling RS-274X files +.. sectionauthor:: Hamilton Kibbe + + +The RS-274X (Gerber) format is the most common format for exporting PCB +artwork. The Specification is published by Ucamco and is available +`here `_. +The :mod:`rs274x` submodule implements calsses to read and write +RS-274X files without having to know the precise details of the format. + +The :mod:`rs274x` submodule's :func:`read` function serves as a +simple interface for parsing gerber files. The :class:`GerberFile` class +stores all the information contained in a gerber file allowing the file to be +analyzed, modified, and updated. The :class:`GerberParser` class is used in +the background for parsing RS-274X files. + +.. _gerber-contents: + +Functions +--------- +The :mod:`rs274x` module defines the following functions: + +.. autofunction:: gerber.rs274x.read + +Classes +------- +The :mod:`rs274x` module defines the following classes: + +.. autoclass:: gerber.rs274x.GerberFile + :members: + +.. autoclass:: gerber.rs274x.GerberParser + :members: \ No newline at end of file -- cgit