deploy.py auto-committmp

1 files changed, 0 insertions, 249 deletions

diff --git a/content/posts/serial-protocols/index.rst b/content/posts/serial-protocols/index.rst
deleted file mode 100644
index 5797947..0000000
--- a/content/posts/serial-protocols/index.rst
+++ /dev/null
@@ -1,249 +0,0 @@
----
-title: "How to talk to your microcontroller over serial"
-date: 2018-05-19T08:09:46+02:00
----
-
-Scroll to the end for the `TL;DR <Conclusion_>`_.
-
-In this article I will give an overview on the protocols spoken on serial ports, highlighting common pitfalls. I will
-summarize some points on how to design a serial protocol that is simple to implement and works reliably even under error
-conditions.
-
-If you have done low-level microcontroller firmware you will regularly have had to stuff some data up a serial port to
-another microcontroller or to a computer. In the age of USB, a serial port is still the simplest and quickest way to get
-communication to a control computer up and running. Integrating a ten thousand-line USB stack into your firmware and
-writing the necessary low-level drivers on the host side might take days. Poking a few registers to set up your UART to
-talk to an external hardware USB to serial converter is a matter of minutes.
-
-This simplicity is treacherous, though. Oftentimes, you start writing your serial protocol as needs arise. Things might
-start harmless with something like ``SET_LED ON\n``, but unless you proceed it is easy to end up in a hot mess of command
-modes, protocol states that breaks under stress. The ways in which serial protocols break are manifold. The simplest one
-is that at some point a character is mangled, leading to both ends of the conversation ending up in misaligned protocol
-states. With a fragile protocol, you might end up in a state that is hard to recover from. In extreme cases, this leads
-to code such as `this gem`_ performing some sort of arcane ritual to get back to some known state, and all just because
-someone did not do their homework. Below we'll embark on a journey through the lands of protocol design, exploring the
-facets of this deceptively simple problem.
-
-.. _`this gem`: https://github.com/juhasch/pyBusPirateLite/blob/master/pyBusPirateLite/BBIO_base.py#L68
-
-Text-based serial protocols
-===========================
-
-The first serial protocol you've likely written is a human-readable, text-based one. Text-based protocols have the big
-advantage that you can just print them on a terminal and you can immediately see what's happening. In most cases you can
-even type out the protocol with your bare hands, meaning that you don't really need a debugging tool beyond a serial
-console.
-
-However, text-based protocols also have a number of disadvantages. Depending on your application, these might not matter
-and in many cases a text-based protocol is the most sensible solution. But then, in some cases they might and it's good
-to know when you hit one of them.
-
-Problems
---------
-
-Low information density
-~~~~~~~~~~~~~~~~~~~~~~~
-
-Generally, you won't be able to stuff much more than four or five bit of information down a serial port using a
-human-readable protocol. In many cases you will get much less. If you have 10 commands that are only issued a couple
-times a second nobody cares that you spend maybe ten bytes per command on nice, verbose strings such as ``SET LED``. But
-if you're trying to squeeze a half-kilobyte framebuffer down the line you might start to notice the difference between
-hex and base-64 encoding, and a binary protocol might really be more up to the job.
-
-Complex parsing code
-~~~~~~~~~~~~~~~~~~~~
-
-On the computer side of thing, with the whole phalanx of an operating system, the standard library of your programming
-language of choice and for all intents and purposes unlimted CPU and memory resources to spare you can easily parse
-anything spoken on a serial port in real time, even at a blazing fast full Megabaud. The microcontroller side however is
-an entirely different beast. On a small microcontroller, printf_ alone will eat about half your flash. On most small
-microcontrollers, you just won't get a regex library even though it would make parsing textual commands *so much
-simpler*. Lacking these resources, you might end up hand-knitting a lot of low-level C code to do something seemingly
-simple such as parsing ``set_channel (13, 1.1333)\n``. These issues have to be taken into account in the protocol design
-from the beginning. If you don't really need matching parentheses, don't use them.
-
-Fragile protocol state
-~~~~~~~~~~~~~~~~~~~~~~
-
-Say you have a ``SET_DISPLAY`` command. Now say your display can display four lines of text. The obvious approach to this
-is probably the SMTP_ or HTTP_ way of sending ``SET_DISPLAY\nThis is line 1\nThis is line 2\n\n``. This would certainly
-work, but it is very fragile. With this protocol, you're in trouble if at any point the terminating second newline
-character gets mangled (say, someone unplugs the cable, or the control computer reboots, or a cosmic ray hits something
-and ``0x10 '\n'`` turns into ``0x50 'P'``).
-
-.. _SMTP: https://en.wikipedia.org/wiki/Simple_Mail_Transfer_Protocol
-.. _HTTP: https://en.wikipedia.org/wiki/Hypertext_Transfer_Protocol
-
-Timeouts don't work
-~~~~~~~~~~~~~~~~~~~
-
-You might try to solve the problem of your protocol state machine tangling up with a timeout. "If I don't get a valid
-command for more than 200ms I go back to default state." But consider the above example. Say, your control computer
-sends a ``SET_DISPLAY`` command every 100ms. If in one of them the state machine tangles up, the parser hangs since the
-timeout is never hit, a new line of text arriving every 100ms.
-
-Framing is hard
-~~~~~~~~~~~~~~~
-
-You might also try to drop the second newline and using a convention such as ``SET_DISPLAY`` is followed by two lines of
-text, then commands resume.". This works as long as your display contents never look like commands. If you are only ever
-displaying the same three messages on a character LCD that might work, but if you're displaying binary framebuffer
-data you've lost.
-
-Solutions
----------
-
-Keep the state machine simple
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Always use a single line of text to represent a single command. Don't do protocol states or modes where you can toggle
-between different interpretations for a line. If you have to send human-readable text as part of a command (such as
-``SET_DISPLAY``) escape it so it doesn't contain any newlines.
-
-This way, you keep your protocol state machine simple. If at any time your serial trips and flips a bit or looses a byte
-your protocol will recover on the next newline character, returning to its base state.
-
-Encode numbers in hex when possible
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Printing a number in hexadecimal is a very tidy operation, even on the smalest 8-bit microcontrollers. In contrast,
-printing decimal requires both division and remainder in a loop which might get annoyingly code- and time-intensive on
-large numbers (say a 32-bit int) and small microcontrollers.
-
-If you have to send fractional values, consider their precision. Instead of sending a 12 bit ADC result as a 32-bit
-float formatted like ``0.176513671875`` sending ``0x2d3`` and dividing by 4096 on the host might be more sensible. If you
-really have to communicate big floats and you can't take the overhead of including both printf_ and scanf_ you can
-use hexadecimal floating point, which is basically ``hex((int)foo) + "." + hex((int)(65536*(foo - (int)foo)))`` for four
-digits. You can also just hex-encode the binary IEEE-754_ representation of the float, sending ``hex(*(int *)&float)``.
-Most programming languages will have a `simple, built-in means to parse this sort of thing
-<https://docs.python.org/3.5/library/struct.html>`__.
-
-.. _printf: http://git.musl-libc.org/cgit/musl/tree/src/stdio/vfprintf.c
-.. _scanf: http://git.musl-libc.org/cgit/musl/tree/src/stdio/vfscanf.c
-.. _IEEE-754: https://en.wikipedia.org/wiki/IEEE_754
-
-Escape multiline strings
-~~~~~~~~~~~~~~~~~~~~~~~~
-
-If you have to send arbitrary strings, escape special characters. This not only has the advantage of yielding a robust
-protocol: It also ensures you can actually see everything that's going on when debugging. The string ``"\r\n"`` is easy to
-distinguish from ``"\n"`` while your terminal emulator might not care.
-
-The simplest encoding to use is the C-style backslash encoding. Host-side, most languages will have a `built-in means of
-escaping a string like that <https://docs.python.org/3.5/library/codecs.html#text-encodings>`__.
-
-Encoding binary data
---------------------
-
-For binary data, hex and base-64 are the most common encodings. Since hex is simpler to implement I'd go with it unless
-I really need the 30% bandwidth improvement base-64 brings.
-
-Binary serial protocols
-=======================
-
-In contrast to anything human-readable, binary protocols are generally more bandwidth-efficient and are easier to format
-and parse. However, binary protocols come with their own version of the caveats we discussed for text-based protocols.
-
-The framing problem in binary protocols
----------------------------------------
-
-The most basic problems with binary protocols as with text-based ones is framing, i.e. splitting up the continuous
-serial data stream into discrete packets. The issue is that it is that you have to somehow mark boundaries between
-frames. The simplest way would be to use some special character to delimit frames, but then any 8-bit character you
-could choose could also occur within a frame.
-
-SLIP/PPP-like special character framing
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Some protocols solve this problem much like we have solved it above for strings in line-based protocols, by escaping any
-occurence of the special delimiter character within frames. That is, if you want to use ``0x00`` as a delimiter, you would
-encode a packet containing ``0xde 0xad 0x00 0xbe 0xef`` as something like ``0xde 0xad 0x01 0x02 0xbe 0xef``, replacing the
-null byte with a magic sequence. This framing works, but is has one critical disadvantage: The length of the resulting
-escaped data is dependent on the raw data, and in the worst case twice as long. In a raw packet consisting entirely of
-null bytes, every byte must be escaped with two escape bytes. This means that in this case the packet length doubles,
-and in this particular case we're even less efficient than base-64.
-
-Highly variable packet length is also bad since it makes it very hard to make any timing guarantees for our protocol.
-
-9-bit framing
-~~~~~~~~~~~~~
-
-A framing mode sometimes used is to configure the UARTs to transmit 9-bit characters and to use the 9th bit to designate
-control characters. This works really well, and gives plenty of control characters to work with. The main problem with
-this is that a 9-bit serial interface is highly nonstandard and you need UARTs on both ends that actually support this
-mode. Another issue is that though more efficient than both delmitier-based and purely text-based protocols, it still
-incurs an extra about 10% of bandwidth overhead. This is not a lot if all you're sending is a little command every now
-and then, but if you're trying to push large amounts of data through your serial it's still bad.
-
-COBS
-~~~~
-
-Given the limitations of the two above-mentioned framing formats, we really want something better. The `Serial Line
-Internet Protocol (SLIP)`_ as well as the `Point to Point Protocol (PPP)`_, standardized in 1988 and 1994 respectively,
-both use escape sequences. This might come as a surprise, but humanity has actually still made significant technological
-progress on protocols for 8-bit serial interfaces until the turn of the millennium. In 1999, `Consistent Overhead Byte
-Stuffing (COBS)`_ (`wiki <https://en.wikipedia.org/wiki/Consistent_Overhead_Byte_Stuffing>`__) was published by a few
-researchers from Apple Computer and Stanford University. As a reaction on the bandwidth doubling problem present in
-PPP_, COBS *always* has an overhead of a single byte, no matter what or how long a packet's content is.
-
-COBS uses the null byte as a delimiter interleaves all the raw packet data and a `run-length encoding`_ of the non-zero
-portions of the raw packet. That is, it prepends the number of bytes until the first zero byte to the packet, plus one.
-Then it takes all the leading non-zero bytes of the packet, unmodified. Then, it again encodes the distance from the
-first zero to the second zero, plus one. And then it takes the second non-zero run of bytes unmodified. And so on. At
-the end, the packet is terminated with a zero byte.
-
-The result of this scheme is that the encoded packet does not contain any zero bytes, as every zero byte has been
-replaced with the number of bytes until the next zero byte, plus one, and that can't be zero. Both formatter and parser
-each have to keep a counter running to keep track of the distances between zero bytes. The first byte of the packet
-initializes that counter and is dropped by the parser. After that, every encoded byte received results in one raw byte
-parsed.
-
-While this might sound more complicated than the escaping explained above, the gains in predictability and efficiency
-are worth it. An implementation of encoder and decoder should each be about ten lines of C or two lines of Python. A
-minor asymmetry of the protocol is that while decoding can be done in-place, encoding either needs two passes or you
-need to scan forward for the next null byte.
-
-.. _`Point to Point Protocol (PPP)`: https://en.wikipedia.org/wiki/Point-to-Point_Protocol
-.. _PPP: https://en.wikipedia.org/wiki/Point-to-Point_Protocol
-.. _`Serial Line Internet Protocol (SLIP)`: https://en.wikipedia.org/wiki/Serial_Line_Internet_Protocol
-.. _`Consistent Overhead Byte Stuffing (COBS)`: http://www.stuartcheshire.org/papers/COBSforToN.pdf
-.. _`Point-to-Point Protocol (PPP)`: https://en.wikipedia.org/wiki/Point-to-Point_Protocol
-.. _`run-length encoding`: https://en.wikipedia.org/wiki/Run-length_encoding
-
-State machines and error recovery
----------------------------------
-
-In binary protocols even more than in textual ones it is tempting to build complex state machines triggering actions on
-a sequence of protocol packets. Please resist that temptation. As with textual protocols keeping the protocol state to
-the minimum possible allows for a self-synchronizing protocol. A serial protocol should be designed such that if due to
-a dropped packet or two both ends will naturally re-synchronize within another packet or two. A simple way of doing that
-is to always transmit one semantic command per packet and to design these commands in the most idempotent_ way possible.
-For example, when filling a framebuffer piece by piece, include the offset in each piece instead of keeping track of it
-on the receiving side.
-
-.. _idempotent: https://en.wikipedia.org/wiki/Idempotence#Computer_science_meaning
-
-Conclusion
-==========
-
-Here's your five-step guide to serial bliss:
-
-1. Unless you have super-special requirements, always use the slowest you can get away with from 9600Bd, 115200Bd or
-   1MBd. 8N1 framing if you're talking to anything but another microcontroller on the same board. These settings are
-   the most common and cover any use case. You'll inevitably have to guess these at some point in the future.
-2. If you're doing something simple and speed is not a particular concern, use a human-readable text-based protocol. Use
-   one command/reply per line, begin each line with some sort of command word and format numbers in hexadecimal. You get
-   bonus points if the device replies to unknown commands with a human-readable status message and prints a brief
-   protocol overview on boot.
-3. If you're doing something even slightly nontrivial or need moderate throughput (>1k commands per second or >20 byte of
-   data per command) use a COBS-based protocol. If you don't have a better idea, go for an ``[target MAC][command
-   ID][command arguments]`` packet format for multidrop busses. For single-drop you may decide to drop the MAC address. 
-4. Always include some sort of "status" command that prints life stats such as VCC, temperature, serial framing errors
-   and uptime. You'll need some sort of ping command anyway and that one might as well do something useful.
-5. If at all possible, keep your protocol context-free across packets/lines. That is, a certain command should always be
-   self-contained, and no command should change the meaning of the next packet or line that is sent. This is really
-   important to allow for self-synchronization. If you really need to break up something into multiple commands, say you
-   want to set a large framebuffer in pieces, do it in a idempotent_ way: Instead of sending something like ``FRAMEBUFFER
-   INCOMING:\n[byte 0-16]\n[byte 17-32]\n[...]\nEND OF FRAME`` rather send ``FRAMEBUFFER DATA FOR OFFSET 0: [byte
-   0-16]\nFRAMEBUFFER DATA FOR OFFSET 17: [byte 17-32]\n[...]\nSWAP BUFFERS\n``.
-