diff options
author | jaseg <git@jaseg.net> | 2017-09-02 12:23:39 +0200 |
---|---|---|
committer | jaseg <git@jaseg.net> | 2017-09-02 12:23:39 +0200 |
commit | 9b52622eabdafa586cc912978f2de95dbf5d08e3 (patch) | |
tree | 14a22b3e4c47b0b813a8536cd9db706810bf4ac9 /fw | |
parent | 446dbe6412be94324b3acac7afb7a730bdbd3ca6 (diff) | |
download | 7seg-9b52622eabdafa586cc912978f2de95dbf5d08e3.tar.gz 7seg-9b52622eabdafa586cc912978f2de95dbf5d08e3.tar.bz2 7seg-9b52622eabdafa586cc912978f2de95dbf5d08e3.zip |
Temperature/VCC ADC working
Diffstat (limited to 'fw')
-rw-r--r-- | fw/Makefile | 4 | ||||
-rw-r--r-- | fw/main.c | 112 |
2 files changed, 95 insertions, 21 deletions
diff --git a/fw/Makefile b/fw/Makefile index 7990e80..a287ed3 100644 --- a/fw/Makefile +++ b/fw/Makefile @@ -11,13 +11,13 @@ OBJCOPY := arm-none-eabi-objcopy OBJDUMP := arm-none-eabi-objdump SIZE := arm-none-eabi-size -CFLAGS = -g -Wall -std=gnu11 -O2 -fdump-rtl-expand -DBUS_ADDR=$(BUS_ADDR) +CFLAGS = -g -Wall -std=gnu11 -O0 -fdump-rtl-expand -DBUS_ADDR=$(BUS_ADDR) CFLAGS += -mlittle-endian -mcpu=cortex-m0 -march=armv6-m -mthumb #CFLAGS += -ffunction-sections -fdata-sections LDFLAGS = -nostartfiles #LDFLAGS += -specs=rdimon.specs -DSEMIHOSTING LDFLAGS += -Wl,-Map=main.map -nostdlib -LDFLAGS += -Wl,--gc-sections +#LDFLAGS += -Wl,--gc-sections LIBS = -lgcc #LIBS += -lrdimon @@ -46,8 +46,13 @@ void strobe_leds(void) { #define FIRMWARE_VERSION 1 #define HARDWARE_VERSION 1 -volatile uint16_t adc_vcc_mv = 0; -volatile uint16_t adc_temp_tenth_celsius = 0; +#define TS_CAL1 (*(uint16_t *)0x1FFFF7B8) +#define VREFINT_CAL (*(uint16_t *)0x1FFFF7BA) + +volatile int16_t adc_vcc_mv = 0; +volatile int16_t adc_temp_tenth_celsius = 0; + +volatile uint16_t adc_buf[2]; volatile unsigned int sys_time = 0; volatile unsigned int sys_time_seconds = 0; @@ -71,7 +76,7 @@ volatile union { digit_cols; uint32_t uptime; uint32_t millifps; - uint16_t vcc_mv, + int16_t vcc_mv, temp_tenth_celsius; uint8_t nbits; } desc_reply; @@ -85,15 +90,15 @@ extern uint8_t bus_addr; #define SR_ILED_HIGH 0x0080 #define SR_ILED_LOW 0x0040 -inline unsigned int stk_start() { +unsigned int stk_start(void) { return SysTick->VAL; } -inline unsigned int stk_end(unsigned int start) { +unsigned int stk_end(unsigned int start) { return (start - SysTick->VAL) & 0xffffff; } -inline unsigned int stk_microseconds() { +unsigned int stk_microseconds(void) { return sys_time*1000 + (1000 - (SysTick->VAL / (SystemCoreClock/1000000))); } @@ -235,13 +240,17 @@ enum Command { }; enum { - PROT_ADDR, + PROT_ADDR_IDLE, + PROT_ADDR_ERR, + PROT_ADDR_COMPLETE, + PROT_ADDR_CRC, + PROT_ADDR_INIT, PROT_CMD, PROT_CRC, PROT_COMPLETE, PROT_INVALID, N_PROT_STATES -} protocol_state = PROT_ADDR; +} protocol_state = PROT_ADDR_INIT; void crc_reset(void) { CRC->CR |= CRC_CR_RESET; @@ -282,35 +291,44 @@ int crc_error_count = 0; static volatile uint32_t rx_crc; static volatile enum Command rx_cmd; void USART1_IRQHandler() { - uint8_t data = USART1->RDR; int isr = USART1->ISR; USART1->RQR |= USART_RQR_RXFRQ; /* Overrun detected? */ if (isr & USART_ISR_ORE) { USART1->ICR |= USART_ICR_ORECF; + asm("bkpt"); goto errout; } if (isr & USART_ISR_IDLE) { USART1->ICR |= USART_ICR_IDLECF; USART1->CR3 &= ~USART_CR3_DMAR_Msk; DMA1_Channel3->CCR &= ~DMA_CCR_EN_Msk; - protocol_state = PROT_ADDR; + DMA1->IFCR |= DMA_IFCR_CGIF3; + protocol_state = PROT_ADDR_IDLE; USART1->RQR |= USART_RQR_RXFRQ; USART1->CR1 |= USART_CR1_RXNEIE; return; } switch(protocol_state) { - case PROT_ADDR: - if (data == bus_addr) /* Are we addressed? */ + case PROT_ADDR_IDLE: + case PROT_ADDR_ERR: + case PROT_ADDR_COMPLETE: + case PROT_ADDR_CRC: + case PROT_ADDR_INIT: + if (data == bus_addr) { /* Are we addressed? */ protocol_state = PROT_CMD; - else /* We are not. Mute USART until next idle condition */ + } else { /* We are not. Mute USART until next idle condition */ + asm("bkpt"); goto errout; + } break; case PROT_CMD: - if (data > N_CMDS) + if (data > N_CMDS) { + asm("bkpt"); goto errout; + } rx_cmd = data; crc_reset(); @@ -319,8 +337,9 @@ void USART1_IRQHandler() { size_t payload_len = cmd_payload_len[data]; if (payload_len) { /* Is rx_buf currently occupied by the main loop formatting frame data? */ - if (fb_op != FB_WRITE) + /* if (fb_op != FB_WRITE) FIXME DEBUG put this back goto errout; + */ kickoff_uart_rx_dma(&rx_buf, payload_len); DMA1_Channel5->CNDTR = payload_len; protocol_state = PROT_CRC; @@ -336,8 +355,12 @@ void USART1_IRQHandler() { return; errout: - protocol_state = PROT_ADDR; + USART1->CR3 &= ~USART_CR3_DMAR_Msk; + DMA1_Channel3->CCR &= ~DMA_CCR_EN_Msk; + DMA1->IFCR |= DMA_IFCR_CGIF3; + protocol_state = PROT_ADDR_ERR; USART1->RQR |= USART_RQR_MMRQ; + asm("bkpt"); } void DMA1_Channel2_3_IRQHandler() { @@ -360,7 +383,7 @@ void DMA1_Channel2_3_IRQHandler() { if (rx_crc != CRC->DR) { crc_error_count++; - protocol_state = PROT_ADDR; + protocol_state = PROT_ADDR_CRC; /* re-enable receive interrupt */ USART1->RQR |= USART_RQR_RXFRQ; USART1->RQR |= USART_RQR_MMRQ; @@ -368,7 +391,7 @@ void DMA1_Channel2_3_IRQHandler() { break; } - protocol_state = PROT_ADDR; + protocol_state = PROT_ADDR_COMPLETE; switch(rx_cmd) { case CMD_PING: @@ -477,6 +500,56 @@ void uart_config(void) { NVIC_SetPriority(DMA1_Channel4_5_IRQn, 5); } +#define ADC_OVERSAMPLING 12 +uint32_t vsense; +void DMA1_Channel1_IRQHandler(void) { + static int count = 0; + static uint32_t adc_aggregate[2] = {0, 0}; + + DMA1->IFCR |= DMA_IFCR_CGIF1; + + adc_aggregate[0] += adc_buf[0]; + adc_aggregate[1] += adc_buf[1]; + + if (count++ == (1<<ADC_OVERSAMPLING)) { + adc_vcc_mv = (3300 * VREFINT_CAL)/(adc_aggregate[0]>>ADC_OVERSAMPLING); + vsense = ((adc_aggregate[1]>>ADC_OVERSAMPLING) * adc_vcc_mv)/4095 ; + adc_temp_tenth_celsius = 300 - (((TS_CAL1*adc_vcc_mv/4095) - vsense)*100)/43; + count = 0; + adc_aggregate[0] = 0; + adc_aggregate[1] = 0; + } +} + +void adc_config(void) { + ADC1->CFGR1 = ADC_CFGR1_CONT | ADC_CFGR1_DMAEN | ADC_CFGR1_DMACFG; + ADC1->CFGR2 = 2<<ADC_CFGR2_CKMODE_Pos; + ADC1->SMPR = 7<<ADC_SMPR_SMP_Pos; + ADC1->CHSELR = ADC_CHSELR_CHSEL16 | ADC_CHSELR_CHSEL17; + ADC->CCR = ADC_CCR_TSEN | ADC_CCR_VREFEN; + ADC1->CR |= ADC_CR_ADCAL; + while (ADC1->CR & ADC_CR_ADCAL) + ; + ADC1->CR |= ADC_CR_ADEN; + ADC1->CR |= ADC_CR_ADSTART; + /* FIXME handle adc overrun */ + + DMA1_Channel1->CPAR = (unsigned int)&ADC1->DR; + DMA1_Channel1->CMAR = (unsigned int)&adc_buf; + DMA1_Channel1->CNDTR = sizeof(adc_buf)/sizeof(adc_buf[0]); + DMA1_Channel1->CCR = (0<<DMA_CCR_PL_Pos); + DMA1_Channel1->CCR |= + DMA_CCR_CIRC + | (1<<DMA_CCR_MSIZE_Pos) /* 16 bit */ + | (1<<DMA_CCR_PSIZE_Pos) /* 16 bit */ + | DMA_CCR_MINC + | DMA_CCR_TCIE; + DMA1_Channel1->CCR |= DMA_CCR_EN; + + NVIC_EnableIRQ(DMA1_Channel1_IRQn); + NVIC_SetPriority(DMA1_Channel1_IRQn, 6); +} + int main(void) { RCC->CR |= RCC_CR_HSEON; while (!(RCC->CR&RCC_CR_HSERDY)); @@ -490,7 +563,7 @@ int main(void) { SystemCoreClockUpdate(); RCC->AHBENR |= RCC_AHBENR_GPIOAEN | RCC_AHBENR_DMAEN | RCC_AHBENR_CRCEN | RCC_AHBENR_FLITFEN; - RCC->APB2ENR |= RCC_APB2ENR_SPI1EN | RCC_APB2ENR_USART1EN | RCC_APB2ENR_SYSCFGEN; + RCC->APB2ENR |= RCC_APB2ENR_SPI1EN | RCC_APB2ENR_USART1EN | RCC_APB2ENR_SYSCFGEN | RCC_APB2ENR_ADCEN; RCC->APB1ENR |= RCC_APB1ENR_TIM3EN; GPIOA->MODER |= @@ -538,6 +611,7 @@ int main(void) { cfg_timer3(); SysTick_Config(SystemCoreClock/1000); /* 1ms interval */ uart_config(); + adc_config(); while (42) { if (fb_op == FB_FORMAT) { |