From 9f95ff5b6ba01db09552b84a0ab79607060a2666 Mon Sep 17 00:00:00 2001 From: Ali Labbene Date: Wed, 11 Dec 2019 08:59:21 +0100 Subject: Official ARM version: v5.4.0 Add CMSIS V5.4.0, please refer to index.html available under \docs folder. Note: content of \CMSIS\Core\Include has been copied under \Include to keep the same structure used in existing projects, and thus avoid projects mass update Note: the following components have been removed from ARM original delivery (as not used in ST packages) - CMSIS_EW2018.pdf - .gitattributes - .gitignore - \Device - \CMSIS - \CoreValidation - \DAP - \Documentation - \DoxyGen - \Driver - \Pack - \RTOS\CMSIS_RTOS_Tutorial.pdf - \RTOS\RTX - \RTOS\Template - \RTOS2\RTX - \Utilities - All ARM/GCC projects files are deleted from \DSP, \RTOS and \RTOS2 Change-Id: Ia026c3f0f0d016627a4fb5a9032852c33d24b4d3 --- docs/RTOS2/html/os2MigrationGuide.html | 282 +++++++++++++++++++++++++++++++++ 1 file changed, 282 insertions(+) create mode 100644 docs/RTOS2/html/os2MigrationGuide.html (limited to 'docs/RTOS2/html/os2MigrationGuide.html') diff --git a/docs/RTOS2/html/os2MigrationGuide.html b/docs/RTOS2/html/os2MigrationGuide.html new file mode 100644 index 0000000..d1b662b --- /dev/null +++ b/docs/RTOS2/html/os2MigrationGuide.html @@ -0,0 +1,282 @@ + + + + + +RTX Migration Guide +CMSIS-RTOS2: RTX Migration Guide + + + + + + + + + + + + + + +
+
+ + + + + + + +
+
CMSIS-RTOS2 +  Version 2.1.3 +
+
Real-Time Operating System: API and RTX Reference Implementation
+
+
+ +
+
    + +
+
+ + + +
+
+ +
+
+
+ +
+ + + + +
+ +
+ +
+
+
RTX Migration Guide
+
+
+

RTX5 supplies both API layers: CMSIS-RTOS v1 and CMSIS-RTOS v2. This allows a gradient transition from version 1 to 2. A modified v1 header and a special v1 compatibility module enable existing code to run on a v2 implementation with almost no modifications.

+

Only a few incompatibilities and limitations exist:

+
    +
  • Kernel startup
    +
      +
    • The function osKernelRunning has been removed in CMSIS-RTOS v2, use osKernelGetState() instead.
      • +
    • Function main was usually a running thread in CMSIS-RTOS v1 implementations, which is not the case in CMSIS-RTOS v2 anymore. The Kernel was running even without calling corresponding APIs to initialize and start the Kernel explicitly. In CMSIS-RTOS v2 the Kernel needs be initialized by calling osKernelInitialize() and must be started by calling osKernelStart().
      • +
    +
    • +
  • OS tick
    + RTX5 uses the OS Tick API to configure the tick interrupts. The interval calculation is typically based on SystemCoreClock variable. Thus one has to assure this variable is set correctly before calling osKernelStart.
    • +
  • The function osWait is deprecated.
    • +
  • Error code incompatibility
    + CMSIS-RTOS v1 used two different error codes for invalid parameters: osErrorParameter and osErrorValue. The new version only uses a common osErrorParameter code. Therefore, code relying on osErrorValue is not compatible. The following functions are affected: +
    • +
  • The osDelay return code has changed from osErrorTimeout to osOK.
    • +
+

The level of migration depends on the project's phase in its life cycle:

+
    +
  • The first level of migration is to migrate to RTX5 without changing the API level.
    • +
  • The second level in the transition is to use v2 API functions and v1 API functions in mixed variation.
    • +
  • The third level is the full transition to the API v2. It is non-trivial and requires some additional development effort to migrate all API v1 calls to v2.
    • +
+

+Level 1 Migration - Upgrade to RTX5 on API v1

+

Upgrade to RTX Version 5 from any 4.x version using the API v1 compatibility layer. Configure an existing project as follows:

+
    +
  • Open Manage Run-Time Environment window
    • +
  • Expand CMSIS software component.
    • +
  • Expand RTOS (API), uncheck Keil RTX, and select Keil RTX5.
    • +
  • Expand RTOS2 (API) and select Keil RTX5.
    • +
  • Resolve missing components.
    • +
+
+RTX5_Migrate1.PNG +
+Component Selection for RTX5
+
    +
  • Click OK.
    • +
  • Expand CMSIS group in the Project window:
    • +
  • Open RTX_Config.h and adapt the configuration to suit the application including (refer to Configure RTX v5):
      +
    • System Configuration->Global Dynamic Memory size
      • +
    • Kernel Tick Frequency
      • +
    • Thread Configuration->Default Thread Stack size
      • +
    +
    • +
  • Rename function int main (void) to void app_main (void *arg).
    • +
  • Create a new function int main (void) which implements at least:
      +
    • System initialization and configuration
      • +
    • Update SystemCoreClock
      • +
    • Initialize CMSIS-RTOS kernel
      • +
    • Creates new thread app_main
      • +
    • Start RTOS scheduler
      • +
    +
    • +
+

Example - Application Main Thread

+
#include "RTE_Components.h"
+
#include CMSIS_device_header
+
+
/* Renamed main() function */
+
void app_main (void const *argument) {
+
// contents of old "main"
+
}
+
+
osThreadDef(app_main, osPriorityNormal, 1, 0);
+
+
int main (void) {
+
// System Initialization
+
SystemCoreClockUpdate();
+
// ...
+
osKernelInitialize();
+
osThreadCreate(osThread(app_main), NULL);
+
osKernelStart();
+
for (;;);
+
}
+
Note
In RTOS API v1 all timings were specified in milliseconds. RTX5 defines all times in kernel ticks. To match both it is recommended to set the Kernel Tick Frequency to 1000 Hz in the System Configuration.
+

To validate the correct operation of your RTOS after migration you can temporarily integrate the RTOS Validation component into your project.

+

+Level 2 Migration - Use API v2 and v1 alongside in RTX5

+

Implementing new features in your project is ideally done using the new API. Both API versions are offered in RTX5 and can exist along-side.

+

The component selection is identical to Migration Level 1.

+

Include "cmsis_os2.h" in all modules where access to API v2 functions is required.

+
#include "cmsis_os.h" // ARM::CMSIS:RTOS:Keil RTX5
+
#include "cmsis_os2.h" // ARM::CMSIS:RTOS2:Keil RTX5
+

The following snippet shows how threads - created with both API versions - live along-side:

+
/*----------------------------------------------------------------------------
+
* Thread 4 'phaseD': Phase D output - API v2 thread
+
*---------------------------------------------------------------------------*/
+
void phaseD (void *argument) {
+
for (;;) {
+
osThreadFlagsWait(0x0001, osFlagsWaitAny, osWaitForever); /* wait for an event flag 0x0001 */
+
Switch_On (LED_D);
+
signal_func(tid_phaseA); /* call common signal function */
+
Switch_Off(LED_D);
+
}
+
}
+
+
/*----------------------------------------------------------------------------
+
* Thread 5 'clock': Signal Clock - API v1 thread
+
*---------------------------------------------------------------------------*/
+
void clock (void const *argument) {
+
for (;;) {
+
osSignalWait(0x0100, osWaitForever); /* Wait for event send by API v2 function osThreadFlagsSet() */
+
Switch_On (LED_CLK);
+
osDelay(80); /* delay ticks */
+
Switch_Off(LED_CLK);
+
}
+
}
+
+
/* Define the API v1 thread */
+
osThreadDef(clock, osPriorityNormal, 1, 0);
+
+
/*----------------------------------------------------------------------------
+
* Main: Initialize and start RTX Kernel
+
*---------------------------------------------------------------------------*/
+
void app_main (void *argument) {
+
+
; //...
+
/* Create the API v2 thread */
+
tid_phaseD = osThreadNew(phaseD, NULL, NULL);
+
/* Create the API v1 thread */
+
tid_clock = osThreadCreate(osThread(clock), NULL);
+
+
osThreadFlagsSet(tid_phaseA, 0x0001); /* set signal to phaseA thread */
+
+
osDelay(osWaitForever);
+
while(1);
+
}
+

The full example "RTX5 Migration" is part of the CMSIS5 pack and available from the pack installer.

+

+Level 3 Migration - Full transition to API v2

+

Migrating fully to APIv2 reduces the overhead of the translation layer and simplifies the project. There is some effort to replace and re-test all API Version 1 calls. The following steps are recommended as a rough guide-line:

+
    +
  • Open Manage Run-Time Environment window:
    • +
  • Expand CMSIS Software Component:
    • +
  • Expand RTOS (API) Software Component and de-select Keil RTX5
    • +
  • Click OK
    • +
  • Exchange all occurrences of
    #include "cmsis_os.h"
    +
    with
    #include "cmsis_os2.h"
    +
    • +
  • Identify all references to the API v1 and replace with the appropriate calls in v2. You might want to use the Error List window in uVision to identify the related code passages quickly.
    • +
+
Note
See Detailed API Function Differences for details in differences.
+

Generally there are no longer os*Def macros to declare OS objects.

+
Note
    +
  • Signal Events have been replaced. Use the functions listed under Thread Flags and Event Flags instead.
    • +
  • The Mail Queue RTOS v1 functions have been deprecated. Use the functionality of the Message Queue instead. Differences are listed under Message Queue.
    • +
+
+
+
+ + + + -- cgit