From 9f95ff5b6ba01db09552b84a0ab79607060a2666 Mon Sep 17 00:00:00 2001 From: Ali Labbene Date: Wed, 11 Dec 2019 08:59:21 +0100 Subject: Official ARM version: v5.4.0 Add CMSIS V5.4.0, please refer to index.html available under \docs folder. Note: content of \CMSIS\Core\Include has been copied under \Include to keep the same structure used in existing projects, and thus avoid projects mass update Note: the following components have been removed from ARM original delivery (as not used in ST packages) - CMSIS_EW2018.pdf - .gitattributes - .gitignore - \Device - \CMSIS - \CoreValidation - \DAP - \Documentation - \DoxyGen - \Driver - \Pack - \RTOS\CMSIS_RTOS_Tutorial.pdf - \RTOS\RTX - \RTOS\Template - \RTOS2\RTX - \Utilities - All ARM/GCC projects files are deleted from \DSP, \RTOS and \RTOS2 Change-Id: Ia026c3f0f0d016627a4fb5a9032852c33d24b4d3 --- docs/DAP/html/group__DAP__atomic__gr.html | 152 ++++++++++++++++++++++++++++++ 1 file changed, 152 insertions(+) create mode 100644 docs/DAP/html/group__DAP__atomic__gr.html (limited to 'docs/DAP/html/group__DAP__atomic__gr.html') diff --git a/docs/DAP/html/group__DAP__atomic__gr.html b/docs/DAP/html/group__DAP__atomic__gr.html new file mode 100644 index 0000000..34548c1 --- /dev/null +++ b/docs/DAP/html/group__DAP__atomic__gr.html @@ -0,0 +1,152 @@ + + + + + +Atomic Commands +CMSIS-DAP: Atomic Commands + + + + + + + + + + + + + + +
+
+ + + + + + + +
+
CMSIS-DAP +  Version 2.0.0 +
+
Interface Firmware for CoreSight Debug Access Port
+
+
+ +
+
    + +
+
+ + + +
+
+ +
+
+
+ +
+ + + + +
+ +
+ +
+
+Content
+
+
Atomic Commands
CMSIS-DAP Commands
+
+
+ +

Execute atomic commands. +More...

+ + + + + + + + +

+Content

 DAP_ExecuteCommands
 Execute multiple DAP commands from a single packet.
 
 DAP_QueueCommands
 Queue multiple DAP commands provided in a multiple packets.
 
+

Description

+

Execute atomic commands.

+

CMSIS-DAP command set is extended with two top level commands that allow the execution of multiple DAP commands further USB communication. Executing multiple CMSIS-DAP commands is typically a requirement at the reset time of some devices. The sequence after reset can be time critical and any USB communication would violate the available time window.

+ +

These two DAP commands are used to collect several other DAP commands before execution. Packet Size and Packet Count limitation (as reported via DAP_Info) must be respected by the debugger.

+
Note
The Atomic Commands are only available when DAP_Info with ID=0xF0 (Capabilities) returns in Info - Bit 4: 1 = Atomic Commands.
+
+
+ + + + -- cgit