From 9f95ff5b6ba01db09552b84a0ab79607060a2666 Mon Sep 17 00:00:00 2001 From: Ali Labbene Date: Wed, 11 Dec 2019 08:59:21 +0100 Subject: Official ARM version: v5.4.0 Add CMSIS V5.4.0, please refer to index.html available under \docs folder. Note: content of \CMSIS\Core\Include has been copied under \Include to keep the same structure used in existing projects, and thus avoid projects mass update Note: the following components have been removed from ARM original delivery (as not used in ST packages) - CMSIS_EW2018.pdf - .gitattributes - .gitignore - \Device - \CMSIS - \CoreValidation - \DAP - \Documentation - \DoxyGen - \Driver - \Pack - \RTOS\CMSIS_RTOS_Tutorial.pdf - \RTOS\RTX - \RTOS\Template - \RTOS2\RTX - \Utilities - All ARM/GCC projects files are deleted from \DSP, \RTOS and \RTOS2 Change-Id: Ia026c3f0f0d016627a4fb5a9032852c33d24b4d3 --- docs/DAP/html/group__DAP__Connect.html | 157 +++++++++++++++++++++++++++++++++ 1 file changed, 157 insertions(+) create mode 100644 docs/DAP/html/group__DAP__Connect.html (limited to 'docs/DAP/html/group__DAP__Connect.html') diff --git a/docs/DAP/html/group__DAP__Connect.html b/docs/DAP/html/group__DAP__Connect.html new file mode 100644 index 0000000..c7a8548 --- /dev/null +++ b/docs/DAP/html/group__DAP__Connect.html @@ -0,0 +1,157 @@ + + + + + +DAP_Connect +CMSIS-DAP: DAP_Connect + + + + + + + + + + + + + + +
+
+ + + + + + + +
+
CMSIS-DAP +  Version 2.0.0 +
+
Interface Firmware for CoreSight Debug Access Port
+
+
+ +
+
    + +
+
+ + + +
+
+ +
+
+
+ +
+ + + + +
+ +
+ +
+
+
DAP_Connect
General Commands
+
+
+ +

Connect to Device and selected DAP mode. +More...

+

Connect to Device and selected DAP mode.

+

The DAP_Connect Command initializes the DAP I/O pins for the specified DAP mode (JTAG or SWD). This command calls the function PORT_SWD_SETUP or PORT_JTAG_SETUP which prepares the connection to the Target Device.

+

DAP_Connect Command:

+
| BYTE | BYTE |
+
> 0x02 | Port |
+
|******|******|
+
    +
  • Port: Selects the DAP port mode and configures the DAP I/O pins. The possible values are:
      +
    • 0 = Default mode: configuration of the DAP port mode is derived from DAP_DEFAULT_PORT (zero configuration).
      • +
    • 1 = SWD mode: connect with Serial Wire Debug mode.
      • +
    • 2 = JTAG mode: connect with 4/5-pin JTAG mode.
      • +
    +
    • +
+

DAP_Connect Response:

+
| BYTE | BYTE |
+
< 0x02 | Port |
+
|******|******|
+
    +
  • Port: DAP port mode initialized. The possible values are:
      +
    • 0 = initialization failed; no mode pre-configured.
      • +
    • 1 = initialization for SWD mode.
      • +
    • 2 = initialization for JTAG mode.
      • +
    +
    • +
+
+
+ + + + -- cgit