diff options
Diffstat (limited to 'NN/NN_Lib_Tests')
15 files changed, 3371 insertions, 0 deletions
diff --git a/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM0/startup_ARMCM0.s b/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM0/startup_ARMCM0.s new file mode 100644 index 0000000..9fc447d --- /dev/null +++ b/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM0/startup_ARMCM0.s @@ -0,0 +1,242 @@ +;/**************************************************************************//** +; * @file startup_ARMCM0.s +; * @brief CMSIS Core Device Startup File for +; * ARMCM0 Device Series +; * @version V5.00 +; * @date 02. March 2016 +; ******************************************************************************/ +;/* +; * Copyright (c) 2009-2016 ARM Limited. All rights reserved. +; * +; * SPDX-License-Identifier: Apache-2.0 +; * +; * Licensed under the Apache License, Version 2.0 (the License); you may +; * not use this file except in compliance with the License. +; * You may obtain a copy of the License at +; * +; * www.apache.org/licenses/LICENSE-2.0 +; * +; * Unless required by applicable law or agreed to in writing, software +; * distributed under the License is distributed on an AS IS BASIS, WITHOUT +; * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +; * See the License for the specific language governing permissions and +; * limitations under the License. +; */ + +;/* +;//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------ +;*/ + + +; <h> Stack Configuration +; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> +; </h> + +Stack_Size EQU 0x00000400 + + AREA STACK, NOINIT, READWRITE, ALIGN=3 +Stack_Mem SPACE Stack_Size +__initial_sp + + +; <h> Heap Configuration +; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> +; </h> + +Heap_Size EQU 0x00000C00 + + AREA HEAP, NOINIT, READWRITE, ALIGN=3 +__heap_base +Heap_Mem SPACE Heap_Size +__heap_limit + + + PRESERVE8 + THUMB + + +; Vector Table Mapped to Address 0 at Reset + + AREA RESET, DATA, READONLY + EXPORT __Vectors + EXPORT __Vectors_End + EXPORT __Vectors_Size + +__Vectors DCD __initial_sp ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WDT_IRQHandler ; 0: Watchdog Timer + DCD RTC_IRQHandler ; 1: Real Time Clock + DCD TIM0_IRQHandler ; 2: Timer0 / Timer1 + DCD TIM2_IRQHandler ; 3: Timer2 / Timer3 + DCD MCIA_IRQHandler ; 4: MCIa + DCD MCIB_IRQHandler ; 5: MCIb + DCD UART0_IRQHandler ; 6: UART0 - DUT FPGA + DCD UART1_IRQHandler ; 7: UART1 - DUT FPGA + DCD UART2_IRQHandler ; 8: UART2 - DUT FPGA + DCD UART4_IRQHandler ; 9: UART4 - not connected + DCD AACI_IRQHandler ; 10: AACI / AC97 + DCD CLCD_IRQHandler ; 11: CLCD Combined Interrupt + DCD ENET_IRQHandler ; 12: Ethernet + DCD USBDC_IRQHandler ; 13: USB Device + DCD USBHC_IRQHandler ; 14: USB Host Controller + DCD CHLCD_IRQHandler ; 15: Character LCD + DCD FLEXRAY_IRQHandler ; 16: Flexray + DCD CAN_IRQHandler ; 17: CAN + DCD LIN_IRQHandler ; 18: LIN + DCD I2C_IRQHandler ; 19: I2C ADC/DAC + DCD 0 ; 20: Reserved + DCD 0 ; 21: Reserved + DCD 0 ; 22: Reserved + DCD 0 ; 23: Reserved + DCD 0 ; 24: Reserved + DCD 0 ; 25: Reserved + DCD 0 ; 26: Reserved + DCD 0 ; 27: Reserved + DCD CPU_CLCD_IRQHandler ; 28: Reserved - CPU FPGA CLCD + DCD 0 ; 29: Reserved - CPU FPGA + DCD UART3_IRQHandler ; 30: UART3 - CPU FPGA + DCD SPI_IRQHandler ; 31: SPI Touchscreen - CPU FPGA +__Vectors_End + +__Vectors_Size EQU __Vectors_End - __Vectors + + AREA |.text|, CODE, READONLY + + +; Reset Handler + +Reset_Handler PROC + EXPORT Reset_Handler [WEAK] + IMPORT SystemInit + IMPORT __main + LDR R0, =SystemInit + BLX R0 + LDR R0, =__main + BX R0 + ENDP + + +; Dummy Exception Handlers (infinite loops which can be modified) + +NMI_Handler PROC + EXPORT NMI_Handler [WEAK] + B . + ENDP +HardFault_Handler\ + PROC + EXPORT HardFault_Handler [WEAK] + B . + ENDP +SVC_Handler PROC + EXPORT SVC_Handler [WEAK] + B . + ENDP +PendSV_Handler PROC + EXPORT PendSV_Handler [WEAK] + B . + ENDP +SysTick_Handler PROC + EXPORT SysTick_Handler [WEAK] + B . + ENDP + +Default_Handler PROC + + EXPORT WDT_IRQHandler [WEAK] + EXPORT RTC_IRQHandler [WEAK] + EXPORT TIM0_IRQHandler [WEAK] + EXPORT TIM2_IRQHandler [WEAK] + EXPORT MCIA_IRQHandler [WEAK] + EXPORT MCIB_IRQHandler [WEAK] + EXPORT UART0_IRQHandler [WEAK] + EXPORT UART1_IRQHandler [WEAK] + EXPORT UART2_IRQHandler [WEAK] + EXPORT UART3_IRQHandler [WEAK] + EXPORT UART4_IRQHandler [WEAK] + EXPORT AACI_IRQHandler [WEAK] + EXPORT CLCD_IRQHandler [WEAK] + EXPORT ENET_IRQHandler [WEAK] + EXPORT USBDC_IRQHandler [WEAK] + EXPORT USBHC_IRQHandler [WEAK] + EXPORT CHLCD_IRQHandler [WEAK] + EXPORT FLEXRAY_IRQHandler [WEAK] + EXPORT CAN_IRQHandler [WEAK] + EXPORT LIN_IRQHandler [WEAK] + EXPORT I2C_IRQHandler [WEAK] + EXPORT CPU_CLCD_IRQHandler [WEAK] + EXPORT SPI_IRQHandler [WEAK] + +WDT_IRQHandler +RTC_IRQHandler +TIM0_IRQHandler +TIM2_IRQHandler +MCIA_IRQHandler +MCIB_IRQHandler +UART0_IRQHandler +UART1_IRQHandler +UART2_IRQHandler +UART3_IRQHandler +UART4_IRQHandler +AACI_IRQHandler +CLCD_IRQHandler +ENET_IRQHandler +USBDC_IRQHandler +USBHC_IRQHandler +CHLCD_IRQHandler +FLEXRAY_IRQHandler +CAN_IRQHandler +LIN_IRQHandler +I2C_IRQHandler +CPU_CLCD_IRQHandler +SPI_IRQHandler + B . + + ENDP + + + ALIGN + + +; User Initial Stack & Heap + + IF :DEF:__MICROLIB + + EXPORT __initial_sp + EXPORT __heap_base + EXPORT __heap_limit + + ELSE + + IMPORT __use_two_region_memory + EXPORT __user_initial_stackheap + +__user_initial_stackheap PROC + LDR R0, = Heap_Mem + LDR R1, =(Stack_Mem + Stack_Size) + LDR R2, = (Heap_Mem + Heap_Size) + LDR R3, = Stack_Mem + BX LR + ENDP + + ALIGN + + ENDIF + + + END diff --git a/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM0/system_ARMCM0.c b/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM0/system_ARMCM0.c new file mode 100644 index 0000000..66829ad --- /dev/null +++ b/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM0/system_ARMCM0.c @@ -0,0 +1,56 @@ +/**************************************************************************//** + * @file system_ARMCM0.c + * @brief CMSIS Device System Source File for + * ARMCM0 Device Series + * @version V5.00 + * @date 08. April 2016 + ******************************************************************************/ +/* + * Copyright (c) 2009-2016 ARM Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#include "ARMCM0.h" + +/*---------------------------------------------------------------------------- + Define clocks + *----------------------------------------------------------------------------*/ +#define XTAL ( 5000000U) /* Oscillator frequency */ + +#define SYSTEM_CLOCK (5 * XTAL) + + +/*---------------------------------------------------------------------------- + System Core Clock Variable + *----------------------------------------------------------------------------*/ +uint32_t SystemCoreClock = SYSTEM_CLOCK; + + +/*---------------------------------------------------------------------------- + System Core Clock update function + *----------------------------------------------------------------------------*/ +void SystemCoreClockUpdate (void) +{ + SystemCoreClock = SYSTEM_CLOCK; +} + +/*---------------------------------------------------------------------------- + System initialization function + *----------------------------------------------------------------------------*/ +void SystemInit (void) +{ + SystemCoreClock = SYSTEM_CLOCK; +} diff --git a/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM3/startup_ARMCM3.s b/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM3/startup_ARMCM3.s new file mode 100644 index 0000000..e3ea17f --- /dev/null +++ b/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM3/startup_ARMCM3.s @@ -0,0 +1,262 @@ +;/**************************************************************************//** +; * @file startup_ARMCM3.s +; * @brief CMSIS Core Device Startup File for +; * ARMCM3 Device Series +; * @version V5.00 +; * @date 02. March 2016 +; ******************************************************************************/ +;/* +; * Copyright (c) 2009-2016 ARM Limited. All rights reserved. +; * +; * SPDX-License-Identifier: Apache-2.0 +; * +; * Licensed under the Apache License, Version 2.0 (the License); you may +; * not use this file except in compliance with the License. +; * You may obtain a copy of the License at +; * +; * www.apache.org/licenses/LICENSE-2.0 +; * +; * Unless required by applicable law or agreed to in writing, software +; * distributed under the License is distributed on an AS IS BASIS, WITHOUT +; * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +; * See the License for the specific language governing permissions and +; * limitations under the License. +; */ + +;/* +;//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------ +;*/ + + +; <h> Stack Configuration +; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> +; </h> + +Stack_Size EQU 0x00000400 + + AREA STACK, NOINIT, READWRITE, ALIGN=3 +Stack_Mem SPACE Stack_Size +__initial_sp + + +; <h> Heap Configuration +; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> +; </h> + +Heap_Size EQU 0x00080000 + + AREA HEAP, NOINIT, READWRITE, ALIGN=3 +__heap_base +Heap_Mem SPACE Heap_Size +__heap_limit + + + PRESERVE8 + THUMB + + +; Vector Table Mapped to Address 0 at Reset + + AREA RESET, DATA, READONLY + EXPORT __Vectors + EXPORT __Vectors_End + EXPORT __Vectors_Size + +__Vectors DCD __initial_sp ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WDT_IRQHandler ; 0: Watchdog Timer + DCD RTC_IRQHandler ; 1: Real Time Clock + DCD TIM0_IRQHandler ; 2: Timer0 / Timer1 + DCD TIM2_IRQHandler ; 3: Timer2 / Timer3 + DCD MCIA_IRQHandler ; 4: MCIa + DCD MCIB_IRQHandler ; 5: MCIb + DCD UART0_IRQHandler ; 6: UART0 - DUT FPGA + DCD UART1_IRQHandler ; 7: UART1 - DUT FPGA + DCD UART2_IRQHandler ; 8: UART2 - DUT FPGA + DCD UART4_IRQHandler ; 9: UART4 - not connected + DCD AACI_IRQHandler ; 10: AACI / AC97 + DCD CLCD_IRQHandler ; 11: CLCD Combined Interrupt + DCD ENET_IRQHandler ; 12: Ethernet + DCD USBDC_IRQHandler ; 13: USB Device + DCD USBHC_IRQHandler ; 14: USB Host Controller + DCD CHLCD_IRQHandler ; 15: Character LCD + DCD FLEXRAY_IRQHandler ; 16: Flexray + DCD CAN_IRQHandler ; 17: CAN + DCD LIN_IRQHandler ; 18: LIN + DCD I2C_IRQHandler ; 19: I2C ADC/DAC + DCD 0 ; 20: Reserved + DCD 0 ; 21: Reserved + DCD 0 ; 22: Reserved + DCD 0 ; 23: Reserved + DCD 0 ; 24: Reserved + DCD 0 ; 25: Reserved + DCD 0 ; 26: Reserved + DCD 0 ; 27: Reserved + DCD CPU_CLCD_IRQHandler ; 28: Reserved - CPU FPGA CLCD + DCD 0 ; 29: Reserved - CPU FPGA + DCD UART3_IRQHandler ; 30: UART3 - CPU FPGA + DCD SPI_IRQHandler ; 31: SPI Touchscreen - CPU FPGA +__Vectors_End + +__Vectors_Size EQU __Vectors_End - __Vectors + + AREA |.text|, CODE, READONLY + + +; Reset Handler + +Reset_Handler PROC + EXPORT Reset_Handler [WEAK] + IMPORT SystemInit + IMPORT __main + LDR R0, =SystemInit + BLX R0 + LDR R0, =__main + BX R0 + ENDP + + +; Dummy Exception Handlers (infinite loops which can be modified) + +NMI_Handler PROC + EXPORT NMI_Handler [WEAK] + B . + ENDP +HardFault_Handler\ + PROC + EXPORT HardFault_Handler [WEAK] + B . + ENDP +MemManage_Handler\ + PROC + EXPORT MemManage_Handler [WEAK] + B . + ENDP +BusFault_Handler\ + PROC + EXPORT BusFault_Handler [WEAK] + B . + ENDP +UsageFault_Handler\ + PROC + EXPORT UsageFault_Handler [WEAK] + B . + ENDP +SVC_Handler PROC + EXPORT SVC_Handler [WEAK] + B . + ENDP +DebugMon_Handler\ + PROC + EXPORT DebugMon_Handler [WEAK] + B . + ENDP +PendSV_Handler PROC + EXPORT PendSV_Handler [WEAK] + B . + ENDP +SysTick_Handler PROC + EXPORT SysTick_Handler [WEAK] + B . + ENDP + +Default_Handler PROC + + EXPORT WDT_IRQHandler [WEAK] + EXPORT RTC_IRQHandler [WEAK] + EXPORT TIM0_IRQHandler [WEAK] + EXPORT TIM2_IRQHandler [WEAK] + EXPORT MCIA_IRQHandler [WEAK] + EXPORT MCIB_IRQHandler [WEAK] + EXPORT UART0_IRQHandler [WEAK] + EXPORT UART1_IRQHandler [WEAK] + EXPORT UART2_IRQHandler [WEAK] + EXPORT UART3_IRQHandler [WEAK] + EXPORT UART4_IRQHandler [WEAK] + EXPORT AACI_IRQHandler [WEAK] + EXPORT CLCD_IRQHandler [WEAK] + EXPORT ENET_IRQHandler [WEAK] + EXPORT USBDC_IRQHandler [WEAK] + EXPORT USBHC_IRQHandler [WEAK] + EXPORT CHLCD_IRQHandler [WEAK] + EXPORT FLEXRAY_IRQHandler [WEAK] + EXPORT CAN_IRQHandler [WEAK] + EXPORT LIN_IRQHandler [WEAK] + EXPORT I2C_IRQHandler [WEAK] + EXPORT CPU_CLCD_IRQHandler [WEAK] + EXPORT SPI_IRQHandler [WEAK] + +WDT_IRQHandler +RTC_IRQHandler +TIM0_IRQHandler +TIM2_IRQHandler +MCIA_IRQHandler +MCIB_IRQHandler +UART0_IRQHandler +UART1_IRQHandler +UART2_IRQHandler +UART3_IRQHandler +UART4_IRQHandler +AACI_IRQHandler +CLCD_IRQHandler +ENET_IRQHandler +USBDC_IRQHandler +USBHC_IRQHandler +CHLCD_IRQHandler +FLEXRAY_IRQHandler +CAN_IRQHandler +LIN_IRQHandler +I2C_IRQHandler +CPU_CLCD_IRQHandler +SPI_IRQHandler + B . + + ENDP + + + ALIGN + + +; User Initial Stack & Heap + + IF :DEF:__MICROLIB + + EXPORT __initial_sp + EXPORT __heap_base + EXPORT __heap_limit + + ELSE + + IMPORT __use_two_region_memory + EXPORT __user_initial_stackheap + +__user_initial_stackheap PROC + LDR R0, = Heap_Mem + LDR R1, =(Stack_Mem + Stack_Size) + LDR R2, = (Heap_Mem + Heap_Size) + LDR R3, = Stack_Mem + BX LR + ENDP + + ALIGN + + ENDIF + + + END diff --git a/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM3/system_ARMCM3.c b/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM3/system_ARMCM3.c new file mode 100644 index 0000000..f08df7a --- /dev/null +++ b/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM3/system_ARMCM3.c @@ -0,0 +1,68 @@ +/**************************************************************************//** + * @file system_ARMCM3.c + * @brief CMSIS Device System Source File for + * ARMCM3 Device Series + * @version V5.00 + * @date 08. April 2016 + ******************************************************************************/ +/* + * Copyright (c) 2009-2016 ARM Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#include "ARMCM3.h" + +/*---------------------------------------------------------------------------- + Define clocks + *----------------------------------------------------------------------------*/ +#define XTAL ( 5000000U) /* Oscillator frequency */ + +#define SYSTEM_CLOCK (5 * XTAL) + + +/*---------------------------------------------------------------------------- + Externals + *----------------------------------------------------------------------------*/ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1) + extern uint32_t __Vectors; +#endif + +/*---------------------------------------------------------------------------- + System Core Clock Variable + *----------------------------------------------------------------------------*/ +uint32_t SystemCoreClock = SYSTEM_CLOCK; + + +/*---------------------------------------------------------------------------- + System Core Clock update function + *----------------------------------------------------------------------------*/ +void SystemCoreClockUpdate (void) +{ + SystemCoreClock = SYSTEM_CLOCK; +} + +/*---------------------------------------------------------------------------- + System initialization function + *----------------------------------------------------------------------------*/ +void SystemInit (void) +{ + +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1) + SCB->VTOR = (uint32_t) &__Vectors; +#endif + + SystemCoreClock = SYSTEM_CLOCK; +} diff --git a/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM4/startup_ARMCM4.s b/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM4/startup_ARMCM4.s new file mode 100644 index 0000000..dae6439 --- /dev/null +++ b/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM4/startup_ARMCM4.s @@ -0,0 +1,262 @@ +;/**************************************************************************//** +; * @file startup_ARMCM4.s +; * @brief CMSIS Core Device Startup File for +; * ARMCM4 Device Series +; * @version V5.00 +; * @date 02. March 2016 +; ******************************************************************************/ +;/* +; * Copyright (c) 2009-2016 ARM Limited. All rights reserved. +; * +; * SPDX-License-Identifier: Apache-2.0 +; * +; * Licensed under the Apache License, Version 2.0 (the License); you may +; * not use this file except in compliance with the License. +; * You may obtain a copy of the License at +; * +; * www.apache.org/licenses/LICENSE-2.0 +; * +; * Unless required by applicable law or agreed to in writing, software +; * distributed under the License is distributed on an AS IS BASIS, WITHOUT +; * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +; * See the License for the specific language governing permissions and +; * limitations under the License. +; */ + +;/* +;//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------ +;*/ + + +; <h> Stack Configuration +; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> +; </h> + +Stack_Size EQU 0x00000400 + + AREA STACK, NOINIT, READWRITE, ALIGN=3 +Stack_Mem SPACE Stack_Size +__initial_sp + + +; <h> Heap Configuration +; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> +; </h> + +Heap_Size EQU 0x00000C00 + + AREA HEAP, NOINIT, READWRITE, ALIGN=3 +__heap_base +Heap_Mem SPACE Heap_Size +__heap_limit + + + PRESERVE8 + THUMB + + +; Vector Table Mapped to Address 0 at Reset + + AREA RESET, DATA, READONLY + EXPORT __Vectors + EXPORT __Vectors_End + EXPORT __Vectors_Size + +__Vectors DCD __initial_sp ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WDT_IRQHandler ; 0: Watchdog Timer + DCD RTC_IRQHandler ; 1: Real Time Clock + DCD TIM0_IRQHandler ; 2: Timer0 / Timer1 + DCD TIM2_IRQHandler ; 3: Timer2 / Timer3 + DCD MCIA_IRQHandler ; 4: MCIa + DCD MCIB_IRQHandler ; 5: MCIb + DCD UART0_IRQHandler ; 6: UART0 - DUT FPGA + DCD UART1_IRQHandler ; 7: UART1 - DUT FPGA + DCD UART2_IRQHandler ; 8: UART2 - DUT FPGA + DCD UART4_IRQHandler ; 9: UART4 - not connected + DCD AACI_IRQHandler ; 10: AACI / AC97 + DCD CLCD_IRQHandler ; 11: CLCD Combined Interrupt + DCD ENET_IRQHandler ; 12: Ethernet + DCD USBDC_IRQHandler ; 13: USB Device + DCD USBHC_IRQHandler ; 14: USB Host Controller + DCD CHLCD_IRQHandler ; 15: Character LCD + DCD FLEXRAY_IRQHandler ; 16: Flexray + DCD CAN_IRQHandler ; 17: CAN + DCD LIN_IRQHandler ; 18: LIN + DCD I2C_IRQHandler ; 19: I2C ADC/DAC + DCD 0 ; 20: Reserved + DCD 0 ; 21: Reserved + DCD 0 ; 22: Reserved + DCD 0 ; 23: Reserved + DCD 0 ; 24: Reserved + DCD 0 ; 25: Reserved + DCD 0 ; 26: Reserved + DCD 0 ; 27: Reserved + DCD CPU_CLCD_IRQHandler ; 28: Reserved - CPU FPGA CLCD + DCD 0 ; 29: Reserved - CPU FPGA + DCD UART3_IRQHandler ; 30: UART3 - CPU FPGA + DCD SPI_IRQHandler ; 31: SPI Touchscreen - CPU FPGA +__Vectors_End + +__Vectors_Size EQU __Vectors_End - __Vectors + + AREA |.text|, CODE, READONLY + + +; Reset Handler + +Reset_Handler PROC + EXPORT Reset_Handler [WEAK] + IMPORT SystemInit + IMPORT __main + LDR R0, =SystemInit + BLX R0 + LDR R0, =__main + BX R0 + ENDP + + +; Dummy Exception Handlers (infinite loops which can be modified) + +NMI_Handler PROC + EXPORT NMI_Handler [WEAK] + B . + ENDP +HardFault_Handler\ + PROC + EXPORT HardFault_Handler [WEAK] + B . + ENDP +MemManage_Handler\ + PROC + EXPORT MemManage_Handler [WEAK] + B . + ENDP +BusFault_Handler\ + PROC + EXPORT BusFault_Handler [WEAK] + B . + ENDP +UsageFault_Handler\ + PROC + EXPORT UsageFault_Handler [WEAK] + B . + ENDP +SVC_Handler PROC + EXPORT SVC_Handler [WEAK] + B . + ENDP +DebugMon_Handler\ + PROC + EXPORT DebugMon_Handler [WEAK] + B . + ENDP +PendSV_Handler PROC + EXPORT PendSV_Handler [WEAK] + B . + ENDP +SysTick_Handler PROC + EXPORT SysTick_Handler [WEAK] + B . + ENDP + +Default_Handler PROC + + EXPORT WDT_IRQHandler [WEAK] + EXPORT RTC_IRQHandler [WEAK] + EXPORT TIM0_IRQHandler [WEAK] + EXPORT TIM2_IRQHandler [WEAK] + EXPORT MCIA_IRQHandler [WEAK] + EXPORT MCIB_IRQHandler [WEAK] + EXPORT UART0_IRQHandler [WEAK] + EXPORT UART1_IRQHandler [WEAK] + EXPORT UART2_IRQHandler [WEAK] + EXPORT UART3_IRQHandler [WEAK] + EXPORT UART4_IRQHandler [WEAK] + EXPORT AACI_IRQHandler [WEAK] + EXPORT CLCD_IRQHandler [WEAK] + EXPORT ENET_IRQHandler [WEAK] + EXPORT USBDC_IRQHandler [WEAK] + EXPORT USBHC_IRQHandler [WEAK] + EXPORT CHLCD_IRQHandler [WEAK] + EXPORT FLEXRAY_IRQHandler [WEAK] + EXPORT CAN_IRQHandler [WEAK] + EXPORT LIN_IRQHandler [WEAK] + EXPORT I2C_IRQHandler [WEAK] + EXPORT CPU_CLCD_IRQHandler [WEAK] + EXPORT SPI_IRQHandler [WEAK] + +WDT_IRQHandler +RTC_IRQHandler +TIM0_IRQHandler +TIM2_IRQHandler +MCIA_IRQHandler +MCIB_IRQHandler +UART0_IRQHandler +UART1_IRQHandler +UART2_IRQHandler +UART3_IRQHandler +UART4_IRQHandler +AACI_IRQHandler +CLCD_IRQHandler +ENET_IRQHandler +USBDC_IRQHandler +USBHC_IRQHandler +CHLCD_IRQHandler +FLEXRAY_IRQHandler +CAN_IRQHandler +LIN_IRQHandler +I2C_IRQHandler +CPU_CLCD_IRQHandler +SPI_IRQHandler + B . + + ENDP + + + ALIGN + + +; User Initial Stack & Heap + + IF :DEF:__MICROLIB + + EXPORT __initial_sp + EXPORT __heap_base + EXPORT __heap_limit + + ELSE + + IMPORT __use_two_region_memory + EXPORT __user_initial_stackheap + +__user_initial_stackheap PROC + LDR R0, = Heap_Mem + LDR R1, =(Stack_Mem + Stack_Size) + LDR R2, = (Heap_Mem + Heap_Size) + LDR R3, = Stack_Mem + BX LR + ENDP + + ALIGN + + ENDIF + + + END diff --git a/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM4/system_ARMCM4.c b/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM4/system_ARMCM4.c new file mode 100644 index 0000000..af23005 --- /dev/null +++ b/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM4/system_ARMCM4.c @@ -0,0 +1,83 @@ +/**************************************************************************//** + * @file system_ARMCM4.c + * @brief CMSIS Device System Source File for + * ARMCM4 Device Series + * @version V5.00 + * @date 07. September 2016 + ******************************************************************************/ +/* + * Copyright (c) 2009-2016 ARM Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined (ARMCM4) + #include "ARMCM4.h" +#elif defined (ARMCM4_FP) + #include "ARMCM4_FP.h" +#else + #error device not specified! +#endif + +/*---------------------------------------------------------------------------- + Define clocks + *----------------------------------------------------------------------------*/ +#define XTAL ( 5000000UL) /* Oscillator frequency */ + +#define SYSTEM_CLOCK (5U * XTAL) + + +/*---------------------------------------------------------------------------- + Externals + *----------------------------------------------------------------------------*/ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + extern uint32_t __Vectors; +#endif + +/*---------------------------------------------------------------------------- + System Core Clock Variable + *----------------------------------------------------------------------------*/ +uint32_t SystemCoreClock = SYSTEM_CLOCK; + + +/*---------------------------------------------------------------------------- + System Core Clock update function + *----------------------------------------------------------------------------*/ +void SystemCoreClockUpdate (void) +{ + SystemCoreClock = SYSTEM_CLOCK; +} + +/*---------------------------------------------------------------------------- + System initialization function + *----------------------------------------------------------------------------*/ +void SystemInit (void) +{ + +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + SCB->VTOR = (uint32_t) &__Vectors; +#endif + +#if defined (__FPU_USED) && (__FPU_USED == 1U) + SCB->CPACR |= ((3U << 10U*2U) | /* set CP10 Full Access */ + (3U << 11U*2U) ); /* set CP11 Full Access */ +#endif + +#ifdef UNALIGNED_SUPPORT_DISABLE + SCB->CCR |= SCB_CCR_UNALIGN_TRP_Msk; +#endif + + SystemCoreClock = SYSTEM_CLOCK; +} diff --git a/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM4_FP/startup_ARMCM4.s b/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM4_FP/startup_ARMCM4.s new file mode 100644 index 0000000..116c5cb --- /dev/null +++ b/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM4_FP/startup_ARMCM4.s @@ -0,0 +1,262 @@ +;/**************************************************************************//** +; * @file startup_ARMCM4.s +; * @brief CMSIS Core Device Startup File for +; * ARMCM4 Device Series +; * @version V5.00 +; * @date 02. March 2016 +; ******************************************************************************/ +;/* +; * Copyright (c) 2009-2016 ARM Limited. All rights reserved. +; * +; * SPDX-License-Identifier: Apache-2.0 +; * +; * Licensed under the Apache License, Version 2.0 (the License); you may +; * not use this file except in compliance with the License. +; * You may obtain a copy of the License at +; * +; * www.apache.org/licenses/LICENSE-2.0 +; * +; * Unless required by applicable law or agreed to in writing, software +; * distributed under the License is distributed on an AS IS BASIS, WITHOUT +; * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +; * See the License for the specific language governing permissions and +; * limitations under the License. +; */ + +;/* +;//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------ +;*/ + + +; <h> Stack Configuration +; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> +; </h> + +Stack_Size EQU 0x00004000 + + AREA STACK, NOINIT, READWRITE, ALIGN=3 +Stack_Mem SPACE Stack_Size +__initial_sp + + +; <h> Heap Configuration +; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> +; </h> + +Heap_Size EQU 0x00100000 + + AREA HEAP, NOINIT, READWRITE, ALIGN=3 +__heap_base +Heap_Mem SPACE Heap_Size +__heap_limit + + + PRESERVE8 + THUMB + + +; Vector Table Mapped to Address 0 at Reset + + AREA RESET, DATA, READONLY + EXPORT __Vectors + EXPORT __Vectors_End + EXPORT __Vectors_Size + +__Vectors DCD __initial_sp ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WDT_IRQHandler ; 0: Watchdog Timer + DCD RTC_IRQHandler ; 1: Real Time Clock + DCD TIM0_IRQHandler ; 2: Timer0 / Timer1 + DCD TIM2_IRQHandler ; 3: Timer2 / Timer3 + DCD MCIA_IRQHandler ; 4: MCIa + DCD MCIB_IRQHandler ; 5: MCIb + DCD UART0_IRQHandler ; 6: UART0 - DUT FPGA + DCD UART1_IRQHandler ; 7: UART1 - DUT FPGA + DCD UART2_IRQHandler ; 8: UART2 - DUT FPGA + DCD UART4_IRQHandler ; 9: UART4 - not connected + DCD AACI_IRQHandler ; 10: AACI / AC97 + DCD CLCD_IRQHandler ; 11: CLCD Combined Interrupt + DCD ENET_IRQHandler ; 12: Ethernet + DCD USBDC_IRQHandler ; 13: USB Device + DCD USBHC_IRQHandler ; 14: USB Host Controller + DCD CHLCD_IRQHandler ; 15: Character LCD + DCD FLEXRAY_IRQHandler ; 16: Flexray + DCD CAN_IRQHandler ; 17: CAN + DCD LIN_IRQHandler ; 18: LIN + DCD I2C_IRQHandler ; 19: I2C ADC/DAC + DCD 0 ; 20: Reserved + DCD 0 ; 21: Reserved + DCD 0 ; 22: Reserved + DCD 0 ; 23: Reserved + DCD 0 ; 24: Reserved + DCD 0 ; 25: Reserved + DCD 0 ; 26: Reserved + DCD 0 ; 27: Reserved + DCD CPU_CLCD_IRQHandler ; 28: Reserved - CPU FPGA CLCD + DCD 0 ; 29: Reserved - CPU FPGA + DCD UART3_IRQHandler ; 30: UART3 - CPU FPGA + DCD SPI_IRQHandler ; 31: SPI Touchscreen - CPU FPGA +__Vectors_End + +__Vectors_Size EQU __Vectors_End - __Vectors + + AREA |.text|, CODE, READONLY + + +; Reset Handler + +Reset_Handler PROC + EXPORT Reset_Handler [WEAK] + IMPORT SystemInit + IMPORT __main + LDR R0, =SystemInit + BLX R0 + LDR R0, =__main + BX R0 + ENDP + + +; Dummy Exception Handlers (infinite loops which can be modified) + +NMI_Handler PROC + EXPORT NMI_Handler [WEAK] + B . + ENDP +HardFault_Handler\ + PROC + EXPORT HardFault_Handler [WEAK] + B . + ENDP +MemManage_Handler\ + PROC + EXPORT MemManage_Handler [WEAK] + B . + ENDP +BusFault_Handler\ + PROC + EXPORT BusFault_Handler [WEAK] + B . + ENDP +UsageFault_Handler\ + PROC + EXPORT UsageFault_Handler [WEAK] + B . + ENDP +SVC_Handler PROC + EXPORT SVC_Handler [WEAK] + B . + ENDP +DebugMon_Handler\ + PROC + EXPORT DebugMon_Handler [WEAK] + B . + ENDP +PendSV_Handler PROC + EXPORT PendSV_Handler [WEAK] + B . + ENDP +SysTick_Handler PROC + EXPORT SysTick_Handler [WEAK] + B . + ENDP + +Default_Handler PROC + + EXPORT WDT_IRQHandler [WEAK] + EXPORT RTC_IRQHandler [WEAK] + EXPORT TIM0_IRQHandler [WEAK] + EXPORT TIM2_IRQHandler [WEAK] + EXPORT MCIA_IRQHandler [WEAK] + EXPORT MCIB_IRQHandler [WEAK] + EXPORT UART0_IRQHandler [WEAK] + EXPORT UART1_IRQHandler [WEAK] + EXPORT UART2_IRQHandler [WEAK] + EXPORT UART3_IRQHandler [WEAK] + EXPORT UART4_IRQHandler [WEAK] + EXPORT AACI_IRQHandler [WEAK] + EXPORT CLCD_IRQHandler [WEAK] + EXPORT ENET_IRQHandler [WEAK] + EXPORT USBDC_IRQHandler [WEAK] + EXPORT USBHC_IRQHandler [WEAK] + EXPORT CHLCD_IRQHandler [WEAK] + EXPORT FLEXRAY_IRQHandler [WEAK] + EXPORT CAN_IRQHandler [WEAK] + EXPORT LIN_IRQHandler [WEAK] + EXPORT I2C_IRQHandler [WEAK] + EXPORT CPU_CLCD_IRQHandler [WEAK] + EXPORT SPI_IRQHandler [WEAK] + +WDT_IRQHandler +RTC_IRQHandler +TIM0_IRQHandler +TIM2_IRQHandler +MCIA_IRQHandler +MCIB_IRQHandler +UART0_IRQHandler +UART1_IRQHandler +UART2_IRQHandler +UART3_IRQHandler +UART4_IRQHandler +AACI_IRQHandler +CLCD_IRQHandler +ENET_IRQHandler +USBDC_IRQHandler +USBHC_IRQHandler +CHLCD_IRQHandler +FLEXRAY_IRQHandler +CAN_IRQHandler +LIN_IRQHandler +I2C_IRQHandler +CPU_CLCD_IRQHandler +SPI_IRQHandler + B . + + ENDP + + + ALIGN + + +; User Initial Stack & Heap + + IF :DEF:__MICROLIB + + EXPORT __initial_sp + EXPORT __heap_base + EXPORT __heap_limit + + ELSE + + IMPORT __use_two_region_memory + EXPORT __user_initial_stackheap + +__user_initial_stackheap PROC + LDR R0, = Heap_Mem + LDR R1, =(Stack_Mem + Stack_Size) + LDR R2, = (Heap_Mem + Heap_Size) + LDR R3, = Stack_Mem + BX LR + ENDP + + ALIGN + + ENDIF + + + END diff --git a/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM4_FP/system_ARMCM4.c b/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM4_FP/system_ARMCM4.c new file mode 100644 index 0000000..070fa1e --- /dev/null +++ b/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM4_FP/system_ARMCM4.c @@ -0,0 +1,83 @@ +/**************************************************************************//** + * @file system_ARMCM4.c + * @brief CMSIS Device System Source File for + * ARMCM4 Device Series + * @version V5.00 + * @date 08. April 2016 + ******************************************************************************/ +/* + * Copyright (c) 2009-2016 ARM Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined (ARMCM4) + #include "ARMCM4.h" +#elif defined (ARMCM4_FP) + #include "ARMCM4_FP.h" +#else + #error device not specified! +#endif + +/*---------------------------------------------------------------------------- + Define clocks + *----------------------------------------------------------------------------*/ +#define XTAL ( 5000000U) /* Oscillator frequency */ + +#define SYSTEM_CLOCK (5 * XTAL) + + +/*---------------------------------------------------------------------------- + Externals + *----------------------------------------------------------------------------*/ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1) + extern uint32_t __Vectors; +#endif + +/*---------------------------------------------------------------------------- + System Core Clock Variable + *----------------------------------------------------------------------------*/ +uint32_t SystemCoreClock = SYSTEM_CLOCK; + + +/*---------------------------------------------------------------------------- + System Core Clock update function + *----------------------------------------------------------------------------*/ +void SystemCoreClockUpdate (void) +{ + SystemCoreClock = SYSTEM_CLOCK; +} + +/*---------------------------------------------------------------------------- + System initialization function + *----------------------------------------------------------------------------*/ +void SystemInit (void) +{ + +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1) + SCB->VTOR = (uint32_t) &__Vectors; +#endif + +#if defined (__FPU_USED) && (__FPU_USED == 1) + SCB->CPACR |= ((3U << 10*2) | /* set CP10 Full Access */ + (3U << 11*2) ); /* set CP11 Full Access */ +#endif + +#ifdef UNALIGNED_SUPPORT_DISABLE + SCB->CCR |= SCB_CCR_UNALIGN_TRP_Msk; +#endif + + SystemCoreClock = SYSTEM_CLOCK; +} diff --git a/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM7_SP/gcc_arm.ld b/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM7_SP/gcc_arm.ld new file mode 100644 index 0000000..b987fd1 --- /dev/null +++ b/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM7_SP/gcc_arm.ld @@ -0,0 +1,196 @@ +/* Linker script to configure memory regions. */ +MEMORY +{ + FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 512K + RAM (rwx) : ORIGIN = 0x20000000, LENGTH = 256K +} + +/* Library configurations */ +GROUP(libgcc.a libc.a libm.a libnosys.a) + +/* Linker script to place sections and symbol values. Should be used together + * with other linker script that defines memory regions FLASH and RAM. + * It references following symbols, which must be defined in code: + * Reset_Handler : Entry of reset handler + * + * It defines following symbols, which code can use without definition: + * __exidx_start + * __exidx_end + * __copy_table_start__ + * __copy_table_end__ + * __zero_table_start__ + * __zero_table_end__ + * __etext + * __data_start__ + * __preinit_array_start + * __preinit_array_end + * __init_array_start + * __init_array_end + * __fini_array_start + * __fini_array_end + * __data_end__ + * __bss_start__ + * __bss_end__ + * __end__ + * end + * __HeapBase + * __HeapLimit + * __StackLimit + * __StackTop + * __stack + * __Vectors_End + * __Vectors_Size + */ +ENTRY(Reset_Handler) + +SECTIONS +{ + .text : + { + KEEP(*(.vectors)) + __Vectors_End = .; + __Vectors_Size = __Vectors_End - __Vectors; + __end__ = .; + + *(.text*) + + KEEP(*(.init)) + KEEP(*(.fini)) + + /* .ctors */ + *crtbegin.o(.ctors) + *crtbegin?.o(.ctors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) + *(SORT(.ctors.*)) + *(.ctors) + + /* .dtors */ + *crtbegin.o(.dtors) + *crtbegin?.o(.dtors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) + *(SORT(.dtors.*)) + *(.dtors) + + *(.rodata*) + + KEEP(*(.eh_frame*)) + } > FLASH + + .ARM.extab : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > FLASH + + __exidx_start = .; + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > FLASH + __exidx_end = .; + + /* To copy multiple ROM to RAM sections, + * uncomment .copy.table section and, + * define __STARTUP_COPY_MULTIPLE in startup_ARMCMx.S */ + /* + .copy.table : + { + . = ALIGN(4); + __copy_table_start__ = .; + LONG (__etext) + LONG (__data_start__) + LONG (__data_end__ - __data_start__) + LONG (__etext2) + LONG (__data2_start__) + LONG (__data2_end__ - __data2_start__) + __copy_table_end__ = .; + } > FLASH + */ + + /* To clear multiple BSS sections, + * uncomment .zero.table section and, + * define __STARTUP_CLEAR_BSS_MULTIPLE in startup_ARMCMx.S */ + /* + .zero.table : + { + . = ALIGN(4); + __zero_table_start__ = .; + LONG (__bss_start__) + LONG (__bss_end__ - __bss_start__) + LONG (__bss2_start__) + LONG (__bss2_end__ - __bss2_start__) + __zero_table_end__ = .; + } > FLASH + */ + + __etext = .; + + .data : AT (__etext) + { + __data_start__ = .; + *(vtable) + *(.data*) + + . = ALIGN(4); + /* preinit data */ + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP(*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + + . = ALIGN(4); + /* init data */ + PROVIDE_HIDDEN (__init_array_start = .); + KEEP(*(SORT(.init_array.*))) + KEEP(*(.init_array)) + PROVIDE_HIDDEN (__init_array_end = .); + + + . = ALIGN(4); + /* finit data */ + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP(*(SORT(.fini_array.*))) + KEEP(*(.fini_array)) + PROVIDE_HIDDEN (__fini_array_end = .); + + KEEP(*(.jcr*)) + . = ALIGN(4); + /* All data end */ + __data_end__ = .; + + } > RAM + + .bss : + { + . = ALIGN(4); + __bss_start__ = .; + *(.bss*) + *(COMMON) + . = ALIGN(4); + __bss_end__ = .; + } > RAM + + .heap (COPY): + { + __HeapBase = .; + __end__ = .; + end = __end__; + KEEP(*(.heap*)) + __HeapLimit = .; + } > RAM + + /* .stack_dummy section doesn't contains any symbols. It is only + * used for linker to calculate size of stack sections, and assign + * values to stack symbols later */ + .stack_dummy (COPY): + { + KEEP(*(.stack*)) + } > RAM + + /* Set stack top to end of RAM, and stack limit move down by + * size of stack_dummy section */ + __StackTop = ORIGIN(RAM) + LENGTH(RAM); + __StackLimit = __StackTop - SIZEOF(.stack_dummy); + PROVIDE(__stack = __StackTop); + + /* Check if data + heap + stack exceeds RAM limit */ + ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack") +} diff --git a/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM7_SP/startup_ARMCM7.c b/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM7_SP/startup_ARMCM7.c new file mode 100644 index 0000000..26edb9f --- /dev/null +++ b/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM7_SP/startup_ARMCM7.c @@ -0,0 +1,295 @@ +/**************************************************************************//** + * @file startup_ARMCM7.s + * @brief CMSIS Core Device Startup File for + * ARMCM7 Device Series + * @version V5.00 + * @date 26. April 2016 + ******************************************************************************/ +/* + * Copyright (c) 2009-2016 ARM Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#include <stdint.h> + + +/*---------------------------------------------------------------------------- + Linker generated Symbols + *----------------------------------------------------------------------------*/ +extern uint32_t __etext; +extern uint32_t __data_start__; +extern uint32_t __data_end__; +extern uint32_t __copy_table_start__; +extern uint32_t __copy_table_end__; +extern uint32_t __zero_table_start__; +extern uint32_t __zero_table_end__; +extern uint32_t __bss_start__; +extern uint32_t __bss_end__; +extern uint32_t __StackTop; + +/*---------------------------------------------------------------------------- + Exception / Interrupt Handler Function Prototype + *----------------------------------------------------------------------------*/ +typedef void( *pFunc )( void ); + + +/*---------------------------------------------------------------------------- + External References + *----------------------------------------------------------------------------*/ +#ifndef __START +extern void _start(void) __attribute__((noreturn)); /* PreeMain (C library entry point) */ +#else +extern int __START(void) __attribute__((noreturn)); /* main entry point */ +#endif + +#ifndef __NO_SYSTEM_INIT +extern void SystemInit (void); /* CMSIS System Initialization */ +#endif + + +/*---------------------------------------------------------------------------- + Internal References + *----------------------------------------------------------------------------*/ +void Default_Handler(void); /* Default empty handler */ +void Reset_Handler(void); /* Reset Handler */ + + +/*---------------------------------------------------------------------------- + User Initial Stack & Heap + *----------------------------------------------------------------------------*/ +#ifndef __STACK_SIZE + #define __STACK_SIZE 0x00000400 +#endif +static uint8_t stack[__STACK_SIZE] __attribute__ ((aligned(8), used, section(".stack"))); + +#ifndef __HEAP_SIZE + #define __HEAP_SIZE 0x00000C00 +#endif +#if __HEAP_SIZE > 0 +static uint8_t heap[__HEAP_SIZE] __attribute__ ((aligned(8), used, section(".heap"))); +#endif + + +/*---------------------------------------------------------------------------- + Exception / Interrupt Handler + *----------------------------------------------------------------------------*/ +/* Cortex-M7 Processor Exceptions */ +void NMI_Handler (void) __attribute__ ((weak, alias("Default_Handler"))); +void HardFault_Handler (void) __attribute__ ((weak, alias("Default_Handler"))); +void MemManage_Handler (void) __attribute__ ((weak, alias("Default_Handler"))); +void BusFault_Handler (void) __attribute__ ((weak, alias("Default_Handler"))); +void UsageFault_Handler (void) __attribute__ ((weak, alias("Default_Handler"))); +void SVC_Handler (void) __attribute__ ((weak, alias("Default_Handler"))); +void DebugMon_Handler (void) __attribute__ ((weak, alias("Default_Handler"))); +void PendSV_Handler (void) __attribute__ ((weak, alias("Default_Handler"))); +void SysTick_Handler (void) __attribute__ ((weak, alias("Default_Handler"))); + +/* ARMCM7 Specific Interrupts */ +void WDT_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler"))); +void RTC_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler"))); +void TIM0_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler"))); +void TIM2_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler"))); +void MCIA_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler"))); +void MCIB_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler"))); +void UART0_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler"))); +void UART1_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler"))); +void UART2_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler"))); +void UART4_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler"))); +void AACI_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler"))); +void CLCD_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler"))); +void ENET_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler"))); +void USBDC_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler"))); +void USBHC_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler"))); +void CHLCD_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler"))); +void FLEXRAY_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler"))); +void CAN_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler"))); +void LIN_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler"))); +void I2C_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler"))); +void CPU_CLCD_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler"))); +void UART3_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler"))); +void SPI_IRQHandler (void) __attribute__ ((weak, alias("Default_Handler"))); + + +/*---------------------------------------------------------------------------- + Exception / Interrupt Vector table + *----------------------------------------------------------------------------*/ +const pFunc __Vectors[] __attribute__ ((section(".vectors"))) = { + /* Cortex-M7 Exceptions Handler */ + (pFunc)((uint32_t)&__StackTop), /* Initial Stack Pointer */ + Reset_Handler, /* Reset Handler */ + NMI_Handler, /* NMI Handler */ + HardFault_Handler, /* Hard Fault Handler */ + MemManage_Handler, /* MPU Fault Handler */ + BusFault_Handler, /* Bus Fault Handler */ + UsageFault_Handler, /* Usage Fault Handler */ + 0, /* Reserved */ + 0, /* Reserved */ + 0, /* Reserved */ + 0, /* Reserved */ + SVC_Handler, /* SVCall Handler */ + DebugMon_Handler, /* Debug Monitor Handler */ + 0, /* Reserved */ + PendSV_Handler, /* PendSV Handler */ + SysTick_Handler, /* SysTick Handler */ + + /* External interrupts */ + WDT_IRQHandler, /* 0: Watchdog Timer */ + RTC_IRQHandler, /* 1: Real Time Clock */ + TIM0_IRQHandler, /* 2: Timer0 / Timer1 */ + TIM2_IRQHandler, /* 3: Timer2 / Timer3 */ + MCIA_IRQHandler, /* 4: MCIa */ + MCIB_IRQHandler, /* 5: MCIb */ + UART0_IRQHandler, /* 6: UART0 - DUT FPGA */ + UART1_IRQHandler, /* 7: UART1 - DUT FPGA */ + UART2_IRQHandler, /* 8: UART2 - DUT FPGA */ + UART4_IRQHandler, /* 9: UART4 - not connected */ + AACI_IRQHandler, /* 10: AACI / AC97 */ + CLCD_IRQHandler, /* 11: CLCD Combined Interrupt */ + ENET_IRQHandler, /* 12: Ethernet */ + USBDC_IRQHandler, /* 13: USB Device */ + USBHC_IRQHandler, /* 14: USB Host Controller */ + CHLCD_IRQHandler, /* 15: Character LCD */ + FLEXRAY_IRQHandler, /* 16: Flexray */ + CAN_IRQHandler, /* 17: CAN */ + LIN_IRQHandler, /* 18: LIN */ + I2C_IRQHandler, /* 19: I2C ADC/DAC */ + 0, /* 20: Reserved */ + 0, /* 21: Reserved */ + 0, /* 22: Reserved */ + 0, /* 23: Reserved */ + 0, /* 24: Reserved */ + 0, /* 25: Reserved */ + 0, /* 26: Reserved */ + 0, /* 27: Reserved */ + CPU_CLCD_IRQHandler, /* 28: Reserved - CPU FPGA CLCD */ + 0, /* 29: Reserved - CPU FPGA */ + UART3_IRQHandler, /* 30: UART3 - CPU FPGA */ + SPI_IRQHandler /* 31: SPI Touchscreen - CPU FPGA */ +}; + + +/*---------------------------------------------------------------------------- + Reset Handler called on controller reset + *----------------------------------------------------------------------------*/ +void Reset_Handler(void) { + uint32_t *pSrc, *pDest; + uint32_t *pTable __attribute__((unused)); + +/* Firstly it copies data from read only memory to RAM. There are two schemes + * to copy. One can copy more than one sections. Another can only copy + * one section. The former scheme needs more instructions and read-only + * data to implement than the latter. + * Macro __STARTUP_COPY_MULTIPLE is used to choose between two schemes. */ + +#ifdef __STARTUP_COPY_MULTIPLE +/* Multiple sections scheme. + * + * Between symbol address __copy_table_start__ and __copy_table_end__, + * there are array of triplets, each of which specify: + * offset 0: LMA of start of a section to copy from + * offset 4: VMA of start of a section to copy to + * offset 8: size of the section to copy. Must be multiply of 4 + * + * All addresses must be aligned to 4 bytes boundary. + */ + pTable = &__copy_table_start__; + + for (; pTable < &__copy_table_end__; pTable = pTable + 3) { + pSrc = (uint32_t*)*(pTable + 0); + pDest = (uint32_t*)*(pTable + 1); + for (; pDest < (uint32_t*)(*(pTable + 1) + *(pTable + 2)) ; ) { + *pDest++ = *pSrc++; + } + } +#else +/* Single section scheme. + * + * The ranges of copy from/to are specified by following symbols + * __etext: LMA of start of the section to copy from. Usually end of text + * __data_start__: VMA of start of the section to copy to + * __data_end__: VMA of end of the section to copy to + * + * All addresses must be aligned to 4 bytes boundary. + */ + pSrc = &__etext; + pDest = &__data_start__; + + for ( ; pDest < &__data_end__ ; ) { + *pDest++ = *pSrc++; + } +#endif /*__STARTUP_COPY_MULTIPLE */ + +/* This part of work usually is done in C library startup code. Otherwise, + * define this macro to enable it in this startup. + * + * There are two schemes too. One can clear multiple BSS sections. Another + * can only clear one section. The former is more size expensive than the + * latter. + * + * Define macro __STARTUP_CLEAR_BSS_MULTIPLE to choose the former. + * Otherwise efine macro __STARTUP_CLEAR_BSS to choose the later. + */ +#ifdef __STARTUP_CLEAR_BSS_MULTIPLE +/* Multiple sections scheme. + * + * Between symbol address __copy_table_start__ and __copy_table_end__, + * there are array of tuples specifying: + * offset 0: Start of a BSS section + * offset 4: Size of this BSS section. Must be multiply of 4 + */ + pTable = &__zero_table_start__; + + for (; pTable < &__zero_table_end__; pTable = pTable + 2) { + pDest = (uint32_t*)*(pTable + 0); + for (; pDest < (uint32_t*)(*(pTable + 0) + *(pTable + 1)) ; ) { + *pDest++ = 0; + } + } +#elif defined (__STARTUP_CLEAR_BSS) +/* Single BSS section scheme. + * + * The BSS section is specified by following symbols + * __bss_start__: start of the BSS section. + * __bss_end__: end of the BSS section. + * + * Both addresses must be aligned to 4 bytes boundary. + */ + pDest = &__bss_start__; + + for ( ; pDest < &__bss_end__ ; ) { + *pDest++ = 0UL; + } +#endif /* __STARTUP_CLEAR_BSS_MULTIPLE || __STARTUP_CLEAR_BSS */ + +#ifndef __NO_SYSTEM_INIT + SystemInit(); +#endif + +#ifndef __START +#define __START _start +#endif + __START(); + +} + + +/*---------------------------------------------------------------------------- + Default Handler for Exceptions / Interrupts + *----------------------------------------------------------------------------*/ +void Default_Handler(void) { + + while(1); +} diff --git a/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM7_SP/startup_ARMCM7.s b/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM7_SP/startup_ARMCM7.s new file mode 100644 index 0000000..0170ef4 --- /dev/null +++ b/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM7_SP/startup_ARMCM7.s @@ -0,0 +1,262 @@ +;/**************************************************************************//** +; * @file startup_ARMCM7.s +; * @brief CMSIS Core Device Startup File for +; * ARMCM7 Device Series +; * @version V5.00 +; * @date 02. March 2016 +; ******************************************************************************/ +;/* +; * Copyright (c) 2009-2016 ARM Limited. All rights reserved. +; * +; * SPDX-License-Identifier: Apache-2.0 +; * +; * Licensed under the Apache License, Version 2.0 (the License); you may +; * not use this file except in compliance with the License. +; * You may obtain a copy of the License at +; * +; * www.apache.org/licenses/LICENSE-2.0 +; * +; * Unless required by applicable law or agreed to in writing, software +; * distributed under the License is distributed on an AS IS BASIS, WITHOUT +; * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +; * See the License for the specific language governing permissions and +; * limitations under the License. +; */ + +;/* +;//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------ +;*/ + + +; <h> Stack Configuration +; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> +; </h> + +Stack_Size EQU 0x00000400 + + AREA STACK, NOINIT, READWRITE, ALIGN=3 +Stack_Mem SPACE Stack_Size +__initial_sp + + +; <h> Heap Configuration +; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> +; </h> + +Heap_Size EQU 0x00080000 + + AREA HEAP, NOINIT, READWRITE, ALIGN=3 +__heap_base +Heap_Mem SPACE Heap_Size +__heap_limit + + + PRESERVE8 + THUMB + + +; Vector Table Mapped to Address 0 at Reset + + AREA RESET, DATA, READONLY + EXPORT __Vectors + EXPORT __Vectors_End + EXPORT __Vectors_Size + +__Vectors DCD __initial_sp ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WDT_IRQHandler ; 0: Watchdog Timer + DCD RTC_IRQHandler ; 1: Real Time Clock + DCD TIM0_IRQHandler ; 2: Timer0 / Timer1 + DCD TIM2_IRQHandler ; 3: Timer2 / Timer3 + DCD MCIA_IRQHandler ; 4: MCIa + DCD MCIB_IRQHandler ; 5: MCIb + DCD UART0_IRQHandler ; 6: UART0 - DUT FPGA + DCD UART1_IRQHandler ; 7: UART1 - DUT FPGA + DCD UART2_IRQHandler ; 8: UART2 - DUT FPGA + DCD UART4_IRQHandler ; 9: UART4 - not connected + DCD AACI_IRQHandler ; 10: AACI / AC97 + DCD CLCD_IRQHandler ; 11: CLCD Combined Interrupt + DCD ENET_IRQHandler ; 12: Ethernet + DCD USBDC_IRQHandler ; 13: USB Device + DCD USBHC_IRQHandler ; 14: USB Host Controller + DCD CHLCD_IRQHandler ; 15: Character LCD + DCD FLEXRAY_IRQHandler ; 16: Flexray + DCD CAN_IRQHandler ; 17: CAN + DCD LIN_IRQHandler ; 18: LIN + DCD I2C_IRQHandler ; 19: I2C ADC/DAC + DCD 0 ; 20: Reserved + DCD 0 ; 21: Reserved + DCD 0 ; 22: Reserved + DCD 0 ; 23: Reserved + DCD 0 ; 24: Reserved + DCD 0 ; 25: Reserved + DCD 0 ; 26: Reserved + DCD 0 ; 27: Reserved + DCD CPU_CLCD_IRQHandler ; 28: Reserved - CPU FPGA CLCD + DCD 0 ; 29: Reserved - CPU FPGA + DCD UART3_IRQHandler ; 30: UART3 - CPU FPGA + DCD SPI_IRQHandler ; 31: SPI Touchscreen - CPU FPGA +__Vectors_End + +__Vectors_Size EQU __Vectors_End - __Vectors + + AREA |.text|, CODE, READONLY + + +; Reset Handler + +Reset_Handler PROC + EXPORT Reset_Handler [WEAK] + IMPORT SystemInit + IMPORT __main + LDR R0, =SystemInit + BLX R0 + LDR R0, =__main + BX R0 + ENDP + + +; Dummy Exception Handlers (infinite loops which can be modified) + +NMI_Handler PROC + EXPORT NMI_Handler [WEAK] + B . + ENDP +HardFault_Handler\ + PROC + EXPORT HardFault_Handler [WEAK] + B . + ENDP +MemManage_Handler\ + PROC + EXPORT MemManage_Handler [WEAK] + B . + ENDP +BusFault_Handler\ + PROC + EXPORT BusFault_Handler [WEAK] + B . + ENDP +UsageFault_Handler\ + PROC + EXPORT UsageFault_Handler [WEAK] + B . + ENDP +SVC_Handler PROC + EXPORT SVC_Handler [WEAK] + B . + ENDP +DebugMon_Handler\ + PROC + EXPORT DebugMon_Handler [WEAK] + B . + ENDP +PendSV_Handler PROC + EXPORT PendSV_Handler [WEAK] + B . + ENDP +SysTick_Handler PROC + EXPORT SysTick_Handler [WEAK] + B . + ENDP + +Default_Handler PROC + + EXPORT WDT_IRQHandler [WEAK] + EXPORT RTC_IRQHandler [WEAK] + EXPORT TIM0_IRQHandler [WEAK] + EXPORT TIM2_IRQHandler [WEAK] + EXPORT MCIA_IRQHandler [WEAK] + EXPORT MCIB_IRQHandler [WEAK] + EXPORT UART0_IRQHandler [WEAK] + EXPORT UART1_IRQHandler [WEAK] + EXPORT UART2_IRQHandler [WEAK] + EXPORT UART3_IRQHandler [WEAK] + EXPORT UART4_IRQHandler [WEAK] + EXPORT AACI_IRQHandler [WEAK] + EXPORT CLCD_IRQHandler [WEAK] + EXPORT ENET_IRQHandler [WEAK] + EXPORT USBDC_IRQHandler [WEAK] + EXPORT USBHC_IRQHandler [WEAK] + EXPORT CHLCD_IRQHandler [WEAK] + EXPORT FLEXRAY_IRQHandler [WEAK] + EXPORT CAN_IRQHandler [WEAK] + EXPORT LIN_IRQHandler [WEAK] + EXPORT I2C_IRQHandler [WEAK] + EXPORT CPU_CLCD_IRQHandler [WEAK] + EXPORT SPI_IRQHandler [WEAK] + +WDT_IRQHandler +RTC_IRQHandler +TIM0_IRQHandler +TIM2_IRQHandler +MCIA_IRQHandler +MCIB_IRQHandler +UART0_IRQHandler +UART1_IRQHandler +UART2_IRQHandler +UART3_IRQHandler +UART4_IRQHandler +AACI_IRQHandler +CLCD_IRQHandler +ENET_IRQHandler +USBDC_IRQHandler +USBHC_IRQHandler +CHLCD_IRQHandler +FLEXRAY_IRQHandler +CAN_IRQHandler +LIN_IRQHandler +I2C_IRQHandler +CPU_CLCD_IRQHandler +SPI_IRQHandler + B . + + ENDP + + + ALIGN + + +; User Initial Stack & Heap + + IF :DEF:__MICROLIB + + EXPORT __initial_sp + EXPORT __heap_base + EXPORT __heap_limit + + ELSE + + IMPORT __use_two_region_memory + EXPORT __user_initial_stackheap + +__user_initial_stackheap PROC + LDR R0, = Heap_Mem + LDR R1, =(Stack_Mem + Stack_Size) + LDR R2, = (Heap_Mem + Heap_Size) + LDR R3, = Stack_Mem + BX LR + ENDP + + ALIGN + + ENDIF + + + END diff --git a/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM7_SP/system_ARMCM7.c b/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM7_SP/system_ARMCM7.c new file mode 100644 index 0000000..65bfaca --- /dev/null +++ b/NN/NN_Lib_Tests/nn_test/RTE/Device/ARMCM7_SP/system_ARMCM7.c @@ -0,0 +1,85 @@ +/**************************************************************************//** + * @file system_ARMCM7.c + * @brief CMSIS Device System Source File for + * ARMCM7 Device Series + * @version V5.00 + * @date 08. April 2016 + ******************************************************************************/ +/* + * Copyright (c) 2009-2016 ARM Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined (ARMCM7) + #include "ARMCM7.h" +#elif defined (ARMCM7_SP) + #include "ARMCM7_SP.h" +#elif defined (ARMCM7_DP) + #include "ARMCM7_DP.h" +#else + #error device not specified! +#endif + +/*---------------------------------------------------------------------------- + Define clocks + *----------------------------------------------------------------------------*/ +#define XTAL ( 5000000U) /* Oscillator frequency */ + +#define SYSTEM_CLOCK (5 * XTAL) + + +/*---------------------------------------------------------------------------- + Externals + *----------------------------------------------------------------------------*/ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1) + extern uint32_t __Vectors; +#endif + +/*---------------------------------------------------------------------------- + System Core Clock Variable + *----------------------------------------------------------------------------*/ +uint32_t SystemCoreClock = SYSTEM_CLOCK; + + +/*---------------------------------------------------------------------------- + System Core Clock update function + *----------------------------------------------------------------------------*/ +void SystemCoreClockUpdate (void) +{ + SystemCoreClock = SYSTEM_CLOCK; +} + +/*---------------------------------------------------------------------------- + System initialization function + *----------------------------------------------------------------------------*/ +void SystemInit (void) +{ + +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1) + SCB->VTOR = (uint32_t) &__Vectors; +#endif + +#if defined (__FPU_USED) && (__FPU_USED == 1) + SCB->CPACR |= ((3U << 10*2) | /* set CP10 Full Access */ + (3U << 11*2) ); /* set CP11 Full Access */ +#endif + +#ifdef UNALIGNED_SUPPORT_DISABLE + SCB->CCR |= SCB_CCR_UNALIGN_TRP_Msk; +#endif + + SystemCoreClock = SYSTEM_CLOCK; +} diff --git a/NN/NN_Lib_Tests/nn_test/RTE/Device/STM32F411RETx/startup_stm32f411xe.s b/NN/NN_Lib_Tests/nn_test/RTE/Device/STM32F411RETx/startup_stm32f411xe.s new file mode 100644 index 0000000..9b70614 --- /dev/null +++ b/NN/NN_Lib_Tests/nn_test/RTE/Device/STM32F411RETx/startup_stm32f411xe.s @@ -0,0 +1,395 @@ +;******************** (C) COPYRIGHT 2016 STMicroelectronics ******************** +;* File Name : startup_stm32f411xe.s +;* Author : MCD Application Team +;* Version : V2.6.0 +;* Date : 04-November-2016 +;* Description : STM32F411xExx devices vector table for MDK-ARM toolchain. +;* This module performs: +;* - Set the initial SP +;* - Set the initial PC == Reset_Handler +;* - Set the vector table entries with the exceptions ISR address +;* - Branches to __main in the C library (which eventually +;* calls main()). +;* After Reset the CortexM4 processor is in Thread mode, +;* priority is Privileged, and the Stack is set to Main. +;* <<< Use Configuration Wizard in Context Menu >>> +;******************************************************************************* +; +;* Redistribution and use in source and binary forms, with or without modification, +;* are permitted provided that the following conditions are met: +;* 1. Redistributions of source code must retain the above copyright notice, +;* this list of conditions and the following disclaimer. +;* 2. Redistributions in binary form must reproduce the above copyright notice, +;* this list of conditions and the following disclaimer in the documentation +;* and/or other materials provided with the distribution. +;* 3. Neither the name of STMicroelectronics nor the names of its contributors +;* may be used to endorse or promote products derived from this software +;* without specific prior written permission. +;* +;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE +;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR +;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +; +;******************************************************************************* + +; Amount of memory (in bytes) allocated for Stack +; Tailor this value to your application needs +; <h> Stack Configuration +; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> +; </h> + +Stack_Size EQU 0x00000400 + + AREA STACK, NOINIT, READWRITE, ALIGN=3 +Stack_Mem SPACE Stack_Size +__initial_sp + + +; <h> Heap Configuration +; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> +; </h> + +Heap_Size EQU 0x00000200 + + AREA HEAP, NOINIT, READWRITE, ALIGN=3 +__heap_base +Heap_Mem SPACE Heap_Size +__heap_limit + + PRESERVE8 + THUMB + + +; Vector Table Mapped to Address 0 at Reset + AREA RESET, DATA, READONLY + EXPORT __Vectors + EXPORT __Vectors_End + EXPORT __Vectors_Size + +__Vectors DCD __initial_sp ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window WatchDog + DCD PVD_IRQHandler ; PVD through EXTI Line detection + DCD TAMP_STAMP_IRQHandler ; Tamper and TimeStamps through the EXTI line + DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line + DCD FLASH_IRQHandler ; FLASH + DCD RCC_IRQHandler ; RCC + DCD EXTI0_IRQHandler ; EXTI Line0 + DCD EXTI1_IRQHandler ; EXTI Line1 + DCD EXTI2_IRQHandler ; EXTI Line2 + DCD EXTI3_IRQHandler ; EXTI Line3 + DCD EXTI4_IRQHandler ; EXTI Line4 + DCD DMA1_Stream0_IRQHandler ; DMA1 Stream 0 + DCD DMA1_Stream1_IRQHandler ; DMA1 Stream 1 + DCD DMA1_Stream2_IRQHandler ; DMA1 Stream 2 + DCD DMA1_Stream3_IRQHandler ; DMA1 Stream 3 + DCD DMA1_Stream4_IRQHandler ; DMA1 Stream 4 + DCD DMA1_Stream5_IRQHandler ; DMA1 Stream 5 + DCD DMA1_Stream6_IRQHandler ; DMA1 Stream 6 + DCD ADC_IRQHandler ; ADC1, ADC2 and ADC3s + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD EXTI9_5_IRQHandler ; External Line[9:5]s + DCD TIM1_BRK_TIM9_IRQHandler ; TIM1 Break and TIM9 + DCD TIM1_UP_TIM10_IRQHandler ; TIM1 Update and TIM10 + DCD TIM1_TRG_COM_TIM11_IRQHandler ; TIM1 Trigger and Commutation and TIM11 + DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare + DCD TIM2_IRQHandler ; TIM2 + DCD TIM3_IRQHandler ; TIM3 + DCD TIM4_IRQHandler ; TIM4 + DCD I2C1_EV_IRQHandler ; I2C1 Event + DCD I2C1_ER_IRQHandler ; I2C1 Error + DCD I2C2_EV_IRQHandler ; I2C2 Event + DCD I2C2_ER_IRQHandler ; I2C2 Error + DCD SPI1_IRQHandler ; SPI1 + DCD SPI2_IRQHandler ; SPI2 + DCD USART1_IRQHandler ; USART1 + DCD USART2_IRQHandler ; USART2 + DCD 0 ; Reserved + DCD EXTI15_10_IRQHandler ; External Line[15:10]s + DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line + DCD OTG_FS_WKUP_IRQHandler ; USB OTG FS Wakeup through EXTI line + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD DMA1_Stream7_IRQHandler ; DMA1 Stream7 + DCD 0 ; Reserved + DCD SDIO_IRQHandler ; SDIO + DCD TIM5_IRQHandler ; TIM5 + DCD SPI3_IRQHandler ; SPI3 + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD DMA2_Stream0_IRQHandler ; DMA2 Stream 0 + DCD DMA2_Stream1_IRQHandler ; DMA2 Stream 1 + DCD DMA2_Stream2_IRQHandler ; DMA2 Stream 2 + DCD DMA2_Stream3_IRQHandler ; DMA2 Stream 3 + DCD DMA2_Stream4_IRQHandler ; DMA2 Stream 4 + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD OTG_FS_IRQHandler ; USB OTG FS + DCD DMA2_Stream5_IRQHandler ; DMA2 Stream 5 + DCD DMA2_Stream6_IRQHandler ; DMA2 Stream 6 + DCD DMA2_Stream7_IRQHandler ; DMA2 Stream 7 + DCD USART6_IRQHandler ; USART6 + DCD I2C3_EV_IRQHandler ; I2C3 event + DCD I2C3_ER_IRQHandler ; I2C3 error + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD FPU_IRQHandler ; FPU + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SPI4_IRQHandler ; SPI4 + DCD SPI5_IRQHandler ; SPI5 + +__Vectors_End + +__Vectors_Size EQU __Vectors_End - __Vectors + + AREA |.text|, CODE, READONLY + +; Reset handler +Reset_Handler PROC + EXPORT Reset_Handler [WEAK] + IMPORT SystemInit + IMPORT __main + + LDR R0, =SystemInit + BLX R0 + LDR R0, =__main + BX R0 + ENDP + +; Dummy Exception Handlers (infinite loops which can be modified) + +NMI_Handler PROC + EXPORT NMI_Handler [WEAK] + B . + ENDP +HardFault_Handler\ + PROC + EXPORT HardFault_Handler [WEAK] + B . + ENDP +MemManage_Handler\ + PROC + EXPORT MemManage_Handler [WEAK] + B . + ENDP +BusFault_Handler\ + PROC + EXPORT BusFault_Handler [WEAK] + B . + ENDP +UsageFault_Handler\ + PROC + EXPORT UsageFault_Handler [WEAK] + B . + ENDP +SVC_Handler PROC + EXPORT SVC_Handler [WEAK] + B . + ENDP +DebugMon_Handler\ + PROC + EXPORT DebugMon_Handler [WEAK] + B . + ENDP +PendSV_Handler PROC + EXPORT PendSV_Handler [WEAK] + B . + ENDP +SysTick_Handler PROC + EXPORT SysTick_Handler [WEAK] + B . + ENDP + +Default_Handler PROC + + EXPORT WWDG_IRQHandler [WEAK] + EXPORT PVD_IRQHandler [WEAK] + EXPORT TAMP_STAMP_IRQHandler [WEAK] + EXPORT RTC_WKUP_IRQHandler [WEAK] + EXPORT FLASH_IRQHandler [WEAK] + EXPORT RCC_IRQHandler [WEAK] + EXPORT EXTI0_IRQHandler [WEAK] + EXPORT EXTI1_IRQHandler [WEAK] + EXPORT EXTI2_IRQHandler [WEAK] + EXPORT EXTI3_IRQHandler [WEAK] + EXPORT EXTI4_IRQHandler [WEAK] + EXPORT DMA1_Stream0_IRQHandler [WEAK] + EXPORT DMA1_Stream1_IRQHandler [WEAK] + EXPORT DMA1_Stream2_IRQHandler [WEAK] + EXPORT DMA1_Stream3_IRQHandler [WEAK] + EXPORT DMA1_Stream4_IRQHandler [WEAK] + EXPORT DMA1_Stream5_IRQHandler [WEAK] + EXPORT DMA1_Stream6_IRQHandler [WEAK] + EXPORT ADC_IRQHandler [WEAK] + EXPORT EXTI9_5_IRQHandler [WEAK] + EXPORT TIM1_BRK_TIM9_IRQHandler [WEAK] + EXPORT TIM1_UP_TIM10_IRQHandler [WEAK] + EXPORT TIM1_TRG_COM_TIM11_IRQHandler [WEAK] + EXPORT TIM1_CC_IRQHandler [WEAK] + EXPORT TIM2_IRQHandler [WEAK] + EXPORT TIM3_IRQHandler [WEAK] + EXPORT TIM4_IRQHandler [WEAK] + EXPORT I2C1_EV_IRQHandler [WEAK] + EXPORT I2C1_ER_IRQHandler [WEAK] + EXPORT I2C2_EV_IRQHandler [WEAK] + EXPORT I2C2_ER_IRQHandler [WEAK] + EXPORT SPI1_IRQHandler [WEAK] + EXPORT SPI2_IRQHandler [WEAK] + EXPORT USART1_IRQHandler [WEAK] + EXPORT USART2_IRQHandler [WEAK] + EXPORT EXTI15_10_IRQHandler [WEAK] + EXPORT RTC_Alarm_IRQHandler [WEAK] + EXPORT OTG_FS_WKUP_IRQHandler [WEAK] + EXPORT DMA1_Stream7_IRQHandler [WEAK] + EXPORT SDIO_IRQHandler [WEAK] + EXPORT TIM5_IRQHandler [WEAK] + EXPORT SPI3_IRQHandler [WEAK] + EXPORT DMA2_Stream0_IRQHandler [WEAK] + EXPORT DMA2_Stream1_IRQHandler [WEAK] + EXPORT DMA2_Stream2_IRQHandler [WEAK] + EXPORT DMA2_Stream3_IRQHandler [WEAK] + EXPORT DMA2_Stream4_IRQHandler [WEAK] + EXPORT OTG_FS_IRQHandler [WEAK] + EXPORT DMA2_Stream5_IRQHandler [WEAK] + EXPORT DMA2_Stream6_IRQHandler [WEAK] + EXPORT DMA2_Stream7_IRQHandler [WEAK] + EXPORT USART6_IRQHandler [WEAK] + EXPORT I2C3_EV_IRQHandler [WEAK] + EXPORT I2C3_ER_IRQHandler [WEAK] + EXPORT FPU_IRQHandler [WEAK] + EXPORT SPI4_IRQHandler [WEAK] + EXPORT SPI5_IRQHandler [WEAK] + +WWDG_IRQHandler +PVD_IRQHandler +TAMP_STAMP_IRQHandler +RTC_WKUP_IRQHandler +FLASH_IRQHandler +RCC_IRQHandler +EXTI0_IRQHandler +EXTI1_IRQHandler +EXTI2_IRQHandler +EXTI3_IRQHandler +EXTI4_IRQHandler +DMA1_Stream0_IRQHandler +DMA1_Stream1_IRQHandler +DMA1_Stream2_IRQHandler +DMA1_Stream3_IRQHandler +DMA1_Stream4_IRQHandler +DMA1_Stream5_IRQHandler +DMA1_Stream6_IRQHandler +ADC_IRQHandler +EXTI9_5_IRQHandler +TIM1_BRK_TIM9_IRQHandler +TIM1_UP_TIM10_IRQHandler +TIM1_TRG_COM_TIM11_IRQHandler +TIM1_CC_IRQHandler +TIM2_IRQHandler +TIM3_IRQHandler +TIM4_IRQHandler +I2C1_EV_IRQHandler +I2C1_ER_IRQHandler +I2C2_EV_IRQHandler +I2C2_ER_IRQHandler +SPI1_IRQHandler +SPI2_IRQHandler +USART1_IRQHandler +USART2_IRQHandler +EXTI15_10_IRQHandler +RTC_Alarm_IRQHandler +OTG_FS_WKUP_IRQHandler +DMA1_Stream7_IRQHandler +SDIO_IRQHandler +TIM5_IRQHandler +SPI3_IRQHandler +DMA2_Stream0_IRQHandler +DMA2_Stream1_IRQHandler +DMA2_Stream2_IRQHandler +DMA2_Stream3_IRQHandler +DMA2_Stream4_IRQHandler +OTG_FS_IRQHandler +DMA2_Stream5_IRQHandler +DMA2_Stream6_IRQHandler +DMA2_Stream7_IRQHandler +USART6_IRQHandler +I2C3_EV_IRQHandler +I2C3_ER_IRQHandler +FPU_IRQHandler +SPI4_IRQHandler +SPI5_IRQHandler + + B . + + ENDP + + ALIGN + +;******************************************************************************* +; User Stack and Heap initialization +;******************************************************************************* + IF :DEF:__MICROLIB + + EXPORT __initial_sp + EXPORT __heap_base + EXPORT __heap_limit + + ELSE + + IMPORT __use_two_region_memory + EXPORT __user_initial_stackheap + +__user_initial_stackheap + + LDR R0, = Heap_Mem + LDR R1, =(Stack_Mem + Stack_Size) + LDR R2, = (Heap_Mem + Heap_Size) + LDR R3, = Stack_Mem + BX LR + + ALIGN + + ENDIF + + END + +;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE***** diff --git a/NN/NN_Lib_Tests/nn_test/RTE/Device/STM32F411RETx/system_stm32f4xx.c b/NN/NN_Lib_Tests/nn_test/RTE/Device/STM32F411RETx/system_stm32f4xx.c new file mode 100644 index 0000000..bca0633 --- /dev/null +++ b/NN/NN_Lib_Tests/nn_test/RTE/Device/STM32F411RETx/system_stm32f4xx.c @@ -0,0 +1,763 @@ +/** + ****************************************************************************** + * @file system_stm32f4xx.c + * @author MCD Application Team + * @version V2.6.0 + * @date 04-November-2016 + * @brief CMSIS Cortex-M4 Device Peripheral Access Layer System Source File. + * + * This file provides two functions and one global variable to be called from + * user application: + * - SystemInit(): This function is called at startup just after reset and + * before branch to main program. This call is made inside + * the "startup_stm32f4xx.s" file. + * + * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used + * by the user application to setup the SysTick + * timer or configure other parameters. + * + * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must + * be called whenever the core clock is changed + * during program execution. + * + * + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT 2016 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32f4xx_system + * @{ + */ + +/** @addtogroup STM32F4xx_System_Private_Includes + * @{ + */ + + +#include "stm32f4xx.h" + +#if !defined (HSE_VALUE) + #define HSE_VALUE ((uint32_t)25000000) /*!< Default value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSI_VALUE) + #define HSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @} + */ + +/** @addtogroup STM32F4xx_System_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32F4xx_System_Private_Defines + * @{ + */ + +/************************* Miscellaneous Configuration ************************/ +/*!< Uncomment the following line if you need to use external SRAM or SDRAM as data memory */ +#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)\ + || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\ + || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) +/* #define DATA_IN_ExtSRAM */ +#endif /* STM32F40xxx || STM32F41xxx || STM32F42xxx || STM32F43xxx || STM32F469xx || STM32F479xx ||\ + STM32F412Zx || STM32F412Vx */ + +#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\ + || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) +/* #define DATA_IN_ExtSDRAM */ +#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx ||\ + STM32F479xx */ + +/*!< Uncomment the following line if you need to relocate your vector Table in + Internal SRAM. */ +/* #define VECT_TAB_SRAM */ +#define VECT_TAB_OFFSET 0x00 /*!< Vector Table base offset field. + This value must be a multiple of 0x200. */ +/******************************************************************************/ + +/** + * @} + */ + +/** @addtogroup STM32F4xx_System_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32F4xx_System_Private_Variables + * @{ + */ + /* This variable is updated in three ways: + 1) by calling CMSIS function SystemCoreClockUpdate() + 2) by calling HAL API function HAL_RCC_GetHCLKFreq() + 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency + Note: If you use this function to configure the system clock; then there + is no need to call the 2 first functions listed above, since SystemCoreClock + variable is updated automatically. + */ +uint32_t SystemCoreClock = 16000000; +const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9}; +const uint8_t APBPrescTable[8] = {0, 0, 0, 0, 1, 2, 3, 4}; +/** + * @} + */ + +/** @addtogroup STM32F4xx_System_Private_FunctionPrototypes + * @{ + */ + +#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM) + static void SystemInit_ExtMemCtl(void); +#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */ + +/** + * @} + */ + +/** @addtogroup STM32F4xx_System_Private_Functions + * @{ + */ + +/** + * @brief Setup the microcontroller system + * Initialize the FPU setting, vector table location and External memory + * configuration. + * @param None + * @retval None + */ +void SystemInit(void) +{ + /* FPU settings ------------------------------------------------------------*/ + #if (__FPU_PRESENT == 1) && (__FPU_USED == 1) + SCB->CPACR |= ((3UL << 10*2)|(3UL << 11*2)); /* set CP10 and CP11 Full Access */ + #endif + /* Reset the RCC clock configuration to the default reset state ------------*/ + /* Set HSION bit */ + RCC->CR |= (uint32_t)0x00000001; + + /* Reset CFGR register */ + RCC->CFGR = 0x00000000; + + /* Reset HSEON, CSSON and PLLON bits */ + RCC->CR &= (uint32_t)0xFEF6FFFF; + + /* Reset PLLCFGR register */ + RCC->PLLCFGR = 0x24003010; + + /* Reset HSEBYP bit */ + RCC->CR &= (uint32_t)0xFFFBFFFF; + + /* Disable all interrupts */ + RCC->CIR = 0x00000000; + +#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM) + SystemInit_ExtMemCtl(); +#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */ + + /* Configure the Vector Table location add offset address ------------------*/ +#ifdef VECT_TAB_SRAM + SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */ +#else + SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */ +#endif +} + +/** + * @brief Update SystemCoreClock variable according to Clock Register Values. + * The SystemCoreClock variable contains the core clock (HCLK), it can + * be used by the user application to setup the SysTick timer or configure + * other parameters. + * + * @note Each time the core clock (HCLK) changes, this function must be called + * to update SystemCoreClock variable value. Otherwise, any configuration + * based on this variable will be incorrect. + * + * @note - The system frequency computed by this function is not the real + * frequency in the chip. It is calculated based on the predefined + * constant and the selected clock source: + * + * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*) + * + * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**) + * + * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**) + * or HSI_VALUE(*) multiplied/divided by the PLL factors. + * + * (*) HSI_VALUE is a constant defined in stm32f4xx_hal_conf.h file (default value + * 16 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * + * (**) HSE_VALUE is a constant defined in stm32f4xx_hal_conf.h file (its value + * depends on the application requirements), user has to ensure that HSE_VALUE + * is same as the real frequency of the crystal used. Otherwise, this function + * may have wrong result. + * + * - The result of this function could be not correct when using fractional + * value for HSE crystal. + * + * @param None + * @retval None + */ +void SystemCoreClockUpdate(void) +{ + uint32_t tmp = 0, pllvco = 0, pllp = 2, pllsource = 0, pllm = 2; + + /* Get SYSCLK source -------------------------------------------------------*/ + tmp = RCC->CFGR & RCC_CFGR_SWS; + + switch (tmp) + { + case 0x00: /* HSI used as system clock source */ + SystemCoreClock = HSI_VALUE; + break; + case 0x04: /* HSE used as system clock source */ + SystemCoreClock = HSE_VALUE; + break; + case 0x08: /* PLL used as system clock source */ + + /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLL_M) * PLL_N + SYSCLK = PLL_VCO / PLL_P + */ + pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) >> 22; + pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM; + + if (pllsource != 0) + { + /* HSE used as PLL clock source */ + pllvco = (HSE_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6); + } + else + { + /* HSI used as PLL clock source */ + pllvco = (HSI_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6); + } + + pllp = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >>16) + 1 ) *2; + SystemCoreClock = pllvco/pllp; + break; + default: + SystemCoreClock = HSI_VALUE; + break; + } + /* Compute HCLK frequency --------------------------------------------------*/ + /* Get HCLK prescaler */ + tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)]; + /* HCLK frequency */ + SystemCoreClock >>= tmp; +} + +#if defined (DATA_IN_ExtSRAM) && defined (DATA_IN_ExtSDRAM) +#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\ + || defined(STM32F469xx) || defined(STM32F479xx) +/** + * @brief Setup the external memory controller. + * Called in startup_stm32f4xx.s before jump to main. + * This function configures the external memories (SRAM/SDRAM) + * This SRAM/SDRAM will be used as program data memory (including heap and stack). + * @param None + * @retval None + */ +void SystemInit_ExtMemCtl(void) +{ + __IO uint32_t tmp = 0x00; + + register uint32_t tmpreg = 0, timeout = 0xFFFF; + register __IO uint32_t index; + + /* Enable GPIOC, GPIOD, GPIOE, GPIOF, GPIOG, GPIOH and GPIOI interface clock */ + RCC->AHB1ENR |= 0x000001F8; + + /* Delay after an RCC peripheral clock enabling */ + tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN); + + /* Connect PDx pins to FMC Alternate function */ + GPIOD->AFR[0] = 0x00CCC0CC; + GPIOD->AFR[1] = 0xCCCCCCCC; + /* Configure PDx pins in Alternate function mode */ + GPIOD->MODER = 0xAAAA0A8A; + /* Configure PDx pins speed to 100 MHz */ + GPIOD->OSPEEDR = 0xFFFF0FCF; + /* Configure PDx pins Output type to push-pull */ + GPIOD->OTYPER = 0x00000000; + /* No pull-up, pull-down for PDx pins */ + GPIOD->PUPDR = 0x00000000; + + /* Connect PEx pins to FMC Alternate function */ + GPIOE->AFR[0] = 0xC00CC0CC; + GPIOE->AFR[1] = 0xCCCCCCCC; + /* Configure PEx pins in Alternate function mode */ + GPIOE->MODER = 0xAAAA828A; + /* Configure PEx pins speed to 100 MHz */ + GPIOE->OSPEEDR = 0xFFFFC3CF; + /* Configure PEx pins Output type to push-pull */ + GPIOE->OTYPER = 0x00000000; + /* No pull-up, pull-down for PEx pins */ + GPIOE->PUPDR = 0x00000000; + + /* Connect PFx pins to FMC Alternate function */ + GPIOF->AFR[0] = 0xCCCCCCCC; + GPIOF->AFR[1] = 0xCCCCCCCC; + /* Configure PFx pins in Alternate function mode */ + GPIOF->MODER = 0xAA800AAA; + /* Configure PFx pins speed to 50 MHz */ + GPIOF->OSPEEDR = 0xAA800AAA; + /* Configure PFx pins Output type to push-pull */ + GPIOF->OTYPER = 0x00000000; + /* No pull-up, pull-down for PFx pins */ + GPIOF->PUPDR = 0x00000000; + + /* Connect PGx pins to FMC Alternate function */ + GPIOG->AFR[0] = 0xCCCCCCCC; + GPIOG->AFR[1] = 0xCCCCCCCC; + /* Configure PGx pins in Alternate function mode */ + GPIOG->MODER = 0xAAAAAAAA; + /* Configure PGx pins speed to 50 MHz */ + GPIOG->OSPEEDR = 0xAAAAAAAA; + /* Configure PGx pins Output type to push-pull */ + GPIOG->OTYPER = 0x00000000; + /* No pull-up, pull-down for PGx pins */ + GPIOG->PUPDR = 0x00000000; + + /* Connect PHx pins to FMC Alternate function */ + GPIOH->AFR[0] = 0x00C0CC00; + GPIOH->AFR[1] = 0xCCCCCCCC; + /* Configure PHx pins in Alternate function mode */ + GPIOH->MODER = 0xAAAA08A0; + /* Configure PHx pins speed to 50 MHz */ + GPIOH->OSPEEDR = 0xAAAA08A0; + /* Configure PHx pins Output type to push-pull */ + GPIOH->OTYPER = 0x00000000; + /* No pull-up, pull-down for PHx pins */ + GPIOH->PUPDR = 0x00000000; + + /* Connect PIx pins to FMC Alternate function */ + GPIOI->AFR[0] = 0xCCCCCCCC; + GPIOI->AFR[1] = 0x00000CC0; + /* Configure PIx pins in Alternate function mode */ + GPIOI->MODER = 0x0028AAAA; + /* Configure PIx pins speed to 50 MHz */ + GPIOI->OSPEEDR = 0x0028AAAA; + /* Configure PIx pins Output type to push-pull */ + GPIOI->OTYPER = 0x00000000; + /* No pull-up, pull-down for PIx pins */ + GPIOI->PUPDR = 0x00000000; + +/*-- FMC Configuration -------------------------------------------------------*/ + /* Enable the FMC interface clock */ + RCC->AHB3ENR |= 0x00000001; + /* Delay after an RCC peripheral clock enabling */ + tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN); + + FMC_Bank5_6->SDCR[0] = 0x000019E4; + FMC_Bank5_6->SDTR[0] = 0x01115351; + + /* SDRAM initialization sequence */ + /* Clock enable command */ + FMC_Bank5_6->SDCMR = 0x00000011; + tmpreg = FMC_Bank5_6->SDSR & 0x00000020; + while((tmpreg != 0) && (timeout-- > 0)) + { + tmpreg = FMC_Bank5_6->SDSR & 0x00000020; + } + + /* Delay */ + for (index = 0; index<1000; index++); + + /* PALL command */ + FMC_Bank5_6->SDCMR = 0x00000012; + timeout = 0xFFFF; + while((tmpreg != 0) && (timeout-- > 0)) + { + tmpreg = FMC_Bank5_6->SDSR & 0x00000020; + } + + /* Auto refresh command */ + FMC_Bank5_6->SDCMR = 0x00000073; + timeout = 0xFFFF; + while((tmpreg != 0) && (timeout-- > 0)) + { + tmpreg = FMC_Bank5_6->SDSR & 0x00000020; + } + + /* MRD register program */ + FMC_Bank5_6->SDCMR = 0x00046014; + timeout = 0xFFFF; + while((tmpreg != 0) && (timeout-- > 0)) + { + tmpreg = FMC_Bank5_6->SDSR & 0x00000020; + } + + /* Set refresh count */ + tmpreg = FMC_Bank5_6->SDRTR; + FMC_Bank5_6->SDRTR = (tmpreg | (0x0000027C<<1)); + + /* Disable write protection */ + tmpreg = FMC_Bank5_6->SDCR[0]; + FMC_Bank5_6->SDCR[0] = (tmpreg & 0xFFFFFDFF); + +#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) + /* Configure and enable Bank1_SRAM2 */ + FMC_Bank1->BTCR[2] = 0x00001011; + FMC_Bank1->BTCR[3] = 0x00000201; + FMC_Bank1E->BWTR[2] = 0x0fffffff; +#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ +#if defined(STM32F469xx) || defined(STM32F479xx) + /* Configure and enable Bank1_SRAM2 */ + FMC_Bank1->BTCR[2] = 0x00001091; + FMC_Bank1->BTCR[3] = 0x00110212; + FMC_Bank1E->BWTR[2] = 0x0fffffff; +#endif /* STM32F469xx || STM32F479xx */ + + (void)(tmp); +} +#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ +#elif defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM) +/** + * @brief Setup the external memory controller. + * Called in startup_stm32f4xx.s before jump to main. + * This function configures the external memories (SRAM/SDRAM) + * This SRAM/SDRAM will be used as program data memory (including heap and stack). + * @param None + * @retval None + */ +void SystemInit_ExtMemCtl(void) +{ + __IO uint32_t tmp = 0x00; +#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\ + || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) +#if defined (DATA_IN_ExtSDRAM) + register uint32_t tmpreg = 0, timeout = 0xFFFF; + register __IO uint32_t index; + +#if defined(STM32F446xx) + /* Enable GPIOA, GPIOC, GPIOD, GPIOE, GPIOF, GPIOG interface + clock */ + RCC->AHB1ENR |= 0x0000007D; +#else + /* Enable GPIOC, GPIOD, GPIOE, GPIOF, GPIOG, GPIOH and GPIOI interface + clock */ + RCC->AHB1ENR |= 0x000001F8; +#endif /* STM32F446xx */ + /* Delay after an RCC peripheral clock enabling */ + tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN); + +#if defined(STM32F446xx) + /* Connect PAx pins to FMC Alternate function */ + GPIOA->AFR[0] |= 0xC0000000; + GPIOA->AFR[1] |= 0x00000000; + /* Configure PDx pins in Alternate function mode */ + GPIOA->MODER |= 0x00008000; + /* Configure PDx pins speed to 50 MHz */ + GPIOA->OSPEEDR |= 0x00008000; + /* Configure PDx pins Output type to push-pull */ + GPIOA->OTYPER |= 0x00000000; + /* No pull-up, pull-down for PDx pins */ + GPIOA->PUPDR |= 0x00000000; + + /* Connect PCx pins to FMC Alternate function */ + GPIOC->AFR[0] |= 0x00CC0000; + GPIOC->AFR[1] |= 0x00000000; + /* Configure PDx pins in Alternate function mode */ + GPIOC->MODER |= 0x00000A00; + /* Configure PDx pins speed to 50 MHz */ + GPIOC->OSPEEDR |= 0x00000A00; + /* Configure PDx pins Output type to push-pull */ + GPIOC->OTYPER |= 0x00000000; + /* No pull-up, pull-down for PDx pins */ + GPIOC->PUPDR |= 0x00000000; +#endif /* STM32F446xx */ + + /* Connect PDx pins to FMC Alternate function */ + GPIOD->AFR[0] = 0x000000CC; + GPIOD->AFR[1] = 0xCC000CCC; + /* Configure PDx pins in Alternate function mode */ + GPIOD->MODER = 0xA02A000A; + /* Configure PDx pins speed to 50 MHz */ + GPIOD->OSPEEDR = 0xA02A000A; + /* Configure PDx pins Output type to push-pull */ + GPIOD->OTYPER = 0x00000000; + /* No pull-up, pull-down for PDx pins */ + GPIOD->PUPDR = 0x00000000; + + /* Connect PEx pins to FMC Alternate function */ + GPIOE->AFR[0] = 0xC00000CC; + GPIOE->AFR[1] = 0xCCCCCCCC; + /* Configure PEx pins in Alternate function mode */ + GPIOE->MODER = 0xAAAA800A; + /* Configure PEx pins speed to 50 MHz */ + GPIOE->OSPEEDR = 0xAAAA800A; + /* Configure PEx pins Output type to push-pull */ + GPIOE->OTYPER = 0x00000000; + /* No pull-up, pull-down for PEx pins */ + GPIOE->PUPDR = 0x00000000; + + /* Connect PFx pins to FMC Alternate function */ + GPIOF->AFR[0] = 0xCCCCCCCC; + GPIOF->AFR[1] = 0xCCCCCCCC; + /* Configure PFx pins in Alternate function mode */ + GPIOF->MODER = 0xAA800AAA; + /* Configure PFx pins speed to 50 MHz */ + GPIOF->OSPEEDR = 0xAA800AAA; + /* Configure PFx pins Output type to push-pull */ + GPIOF->OTYPER = 0x00000000; + /* No pull-up, pull-down for PFx pins */ + GPIOF->PUPDR = 0x00000000; + + /* Connect PGx pins to FMC Alternate function */ + GPIOG->AFR[0] = 0xCCCCCCCC; + GPIOG->AFR[1] = 0xCCCCCCCC; + /* Configure PGx pins in Alternate function mode */ + GPIOG->MODER = 0xAAAAAAAA; + /* Configure PGx pins speed to 50 MHz */ + GPIOG->OSPEEDR = 0xAAAAAAAA; + /* Configure PGx pins Output type to push-pull */ + GPIOG->OTYPER = 0x00000000; + /* No pull-up, pull-down for PGx pins */ + GPIOG->PUPDR = 0x00000000; + +#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\ + || defined(STM32F469xx) || defined(STM32F479xx) + /* Connect PHx pins to FMC Alternate function */ + GPIOH->AFR[0] = 0x00C0CC00; + GPIOH->AFR[1] = 0xCCCCCCCC; + /* Configure PHx pins in Alternate function mode */ + GPIOH->MODER = 0xAAAA08A0; + /* Configure PHx pins speed to 50 MHz */ + GPIOH->OSPEEDR = 0xAAAA08A0; + /* Configure PHx pins Output type to push-pull */ + GPIOH->OTYPER = 0x00000000; + /* No pull-up, pull-down for PHx pins */ + GPIOH->PUPDR = 0x00000000; + + /* Connect PIx pins to FMC Alternate function */ + GPIOI->AFR[0] = 0xCCCCCCCC; + GPIOI->AFR[1] = 0x00000CC0; + /* Configure PIx pins in Alternate function mode */ + GPIOI->MODER = 0x0028AAAA; + /* Configure PIx pins speed to 50 MHz */ + GPIOI->OSPEEDR = 0x0028AAAA; + /* Configure PIx pins Output type to push-pull */ + GPIOI->OTYPER = 0x00000000; + /* No pull-up, pull-down for PIx pins */ + GPIOI->PUPDR = 0x00000000; +#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ + +/*-- FMC Configuration -------------------------------------------------------*/ + /* Enable the FMC interface clock */ + RCC->AHB3ENR |= 0x00000001; + /* Delay after an RCC peripheral clock enabling */ + tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN); + + /* Configure and enable SDRAM bank1 */ +#if defined(STM32F446xx) + FMC_Bank5_6->SDCR[0] = 0x00001954; +#else + FMC_Bank5_6->SDCR[0] = 0x000019E4; +#endif /* STM32F446xx */ + FMC_Bank5_6->SDTR[0] = 0x01115351; + + /* SDRAM initialization sequence */ + /* Clock enable command */ + FMC_Bank5_6->SDCMR = 0x00000011; + tmpreg = FMC_Bank5_6->SDSR & 0x00000020; + while((tmpreg != 0) && (timeout-- > 0)) + { + tmpreg = FMC_Bank5_6->SDSR & 0x00000020; + } + + /* Delay */ + for (index = 0; index<1000; index++); + + /* PALL command */ + FMC_Bank5_6->SDCMR = 0x00000012; + timeout = 0xFFFF; + while((tmpreg != 0) && (timeout-- > 0)) + { + tmpreg = FMC_Bank5_6->SDSR & 0x00000020; + } + + /* Auto refresh command */ +#if defined(STM32F446xx) + FMC_Bank5_6->SDCMR = 0x000000F3; +#else + FMC_Bank5_6->SDCMR = 0x00000073; +#endif /* STM32F446xx */ + timeout = 0xFFFF; + while((tmpreg != 0) && (timeout-- > 0)) + { + tmpreg = FMC_Bank5_6->SDSR & 0x00000020; + } + + /* MRD register program */ +#if defined(STM32F446xx) + FMC_Bank5_6->SDCMR = 0x00044014; +#else + FMC_Bank5_6->SDCMR = 0x00046014; +#endif /* STM32F446xx */ + timeout = 0xFFFF; + while((tmpreg != 0) && (timeout-- > 0)) + { + tmpreg = FMC_Bank5_6->SDSR & 0x00000020; + } + + /* Set refresh count */ + tmpreg = FMC_Bank5_6->SDRTR; +#if defined(STM32F446xx) + FMC_Bank5_6->SDRTR = (tmpreg | (0x0000050C<<1)); +#else + FMC_Bank5_6->SDRTR = (tmpreg | (0x0000027C<<1)); +#endif /* STM32F446xx */ + + /* Disable write protection */ + tmpreg = FMC_Bank5_6->SDCR[0]; + FMC_Bank5_6->SDCR[0] = (tmpreg & 0xFFFFFDFF); +#endif /* DATA_IN_ExtSDRAM */ +#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */ + +#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)\ + || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\ + || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) + +#if defined(DATA_IN_ExtSRAM) +/*-- GPIOs Configuration -----------------------------------------------------*/ + /* Enable GPIOD, GPIOE, GPIOF and GPIOG interface clock */ + RCC->AHB1ENR |= 0x00000078; + /* Delay after an RCC peripheral clock enabling */ + tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN); + + /* Connect PDx pins to FMC Alternate function */ + GPIOD->AFR[0] = 0x00CCC0CC; + GPIOD->AFR[1] = 0xCCCCCCCC; + /* Configure PDx pins in Alternate function mode */ + GPIOD->MODER = 0xAAAA0A8A; + /* Configure PDx pins speed to 100 MHz */ + GPIOD->OSPEEDR = 0xFFFF0FCF; + /* Configure PDx pins Output type to push-pull */ + GPIOD->OTYPER = 0x00000000; + /* No pull-up, pull-down for PDx pins */ + GPIOD->PUPDR = 0x00000000; + + /* Connect PEx pins to FMC Alternate function */ + GPIOE->AFR[0] = 0xC00CC0CC; + GPIOE->AFR[1] = 0xCCCCCCCC; + /* Configure PEx pins in Alternate function mode */ + GPIOE->MODER = 0xAAAA828A; + /* Configure PEx pins speed to 100 MHz */ + GPIOE->OSPEEDR = 0xFFFFC3CF; + /* Configure PEx pins Output type to push-pull */ + GPIOE->OTYPER = 0x00000000; + /* No pull-up, pull-down for PEx pins */ + GPIOE->PUPDR = 0x00000000; + + /* Connect PFx pins to FMC Alternate function */ + GPIOF->AFR[0] = 0x00CCCCCC; + GPIOF->AFR[1] = 0xCCCC0000; + /* Configure PFx pins in Alternate function mode */ + GPIOF->MODER = 0xAA000AAA; + /* Configure PFx pins speed to 100 MHz */ + GPIOF->OSPEEDR = 0xFF000FFF; + /* Configure PFx pins Output type to push-pull */ + GPIOF->OTYPER = 0x00000000; + /* No pull-up, pull-down for PFx pins */ + GPIOF->PUPDR = 0x00000000; + + /* Connect PGx pins to FMC Alternate function */ + GPIOG->AFR[0] = 0x00CCCCCC; + GPIOG->AFR[1] = 0x000000C0; + /* Configure PGx pins in Alternate function mode */ + GPIOG->MODER = 0x00085AAA; + /* Configure PGx pins speed to 100 MHz */ + GPIOG->OSPEEDR = 0x000CAFFF; + /* Configure PGx pins Output type to push-pull */ + GPIOG->OTYPER = 0x00000000; + /* No pull-up, pull-down for PGx pins */ + GPIOG->PUPDR = 0x00000000; + +/*-- FMC/FSMC Configuration --------------------------------------------------*/ + /* Enable the FMC/FSMC interface clock */ + RCC->AHB3ENR |= 0x00000001; + +#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) + /* Delay after an RCC peripheral clock enabling */ + tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN); + /* Configure and enable Bank1_SRAM2 */ + FMC_Bank1->BTCR[2] = 0x00001011; + FMC_Bank1->BTCR[3] = 0x00000201; + FMC_Bank1E->BWTR[2] = 0x0fffffff; +#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ +#if defined(STM32F469xx) || defined(STM32F479xx) + /* Delay after an RCC peripheral clock enabling */ + tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN); + /* Configure and enable Bank1_SRAM2 */ + FMC_Bank1->BTCR[2] = 0x00001091; + FMC_Bank1->BTCR[3] = 0x00110212; + FMC_Bank1E->BWTR[2] = 0x0fffffff; +#endif /* STM32F469xx || STM32F479xx */ +#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx)\ + || defined(STM32F412Zx) || defined(STM32F412Vx) + /* Delay after an RCC peripheral clock enabling */ + tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FSMCEN); + /* Configure and enable Bank1_SRAM2 */ + FSMC_Bank1->BTCR[2] = 0x00001011; + FSMC_Bank1->BTCR[3] = 0x00000201; + FSMC_Bank1E->BWTR[2] = 0x0FFFFFFF; +#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F412Zx || STM32F412Vx */ + +#endif /* DATA_IN_ExtSRAM */ +#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx ||\ + STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx */ + (void)(tmp); +} +#endif /* DATA_IN_ExtSRAM && DATA_IN_ExtSDRAM */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/NN/NN_Lib_Tests/nn_test/runTest.bat b/NN/NN_Lib_Tests/nn_test/runTest.bat new file mode 100644 index 0000000..fbf8cdb --- /dev/null +++ b/NN/NN_Lib_Tests/nn_test/runTest.bat @@ -0,0 +1,57 @@ +@echo off + +set UVEXE=C:\Keil_v5\UV4\UV4.EXE + +echo Building NN Test for Cortex-M7 Single Precision Little Endian +%UVEXE% -rb -j0 arm_nnexamples_nn_test.uvprojx -t "ARMCM7_SP" -o "NN_Test_ARMCM7_SP_build.log" + +echo Running NN Test for Cortex-M7 Single Precision Little Endian +%UVEXE% -d arm_nnexamples_nn_test.uvprojx -t "ARMCM7_SP" -j0 + +type NN_TEST.log +del NN_TEST.log + +echo Building NN Test for Cortex-M4 FP Little Endian +%UVEXE% -rb -j0 arm_nnexamples_nn_test.uvprojx -t "ARMCM4_FP" -o "NN_Test_ARMCM4_FP_build.log" + +echo Running NN Test for Cortex-M4 FP Little Endian +%UVEXE% -d arm_nnexamples_nn_test.uvprojx -t "ARMCM4_FP" -j0 + +type NN_TEST.log +del NN_TEST.log + +echo Building NN Test for Cortex-M4 FP Little Endian Truncate +%UVEXE% -rb -j0 arm_nnexamples_nn_test.uvprojx -t "ARMCM4_FP_truncate" -o "NN_Test_ARMCM4_FP_truncate_build.log" + +echo Running NN Test for Cortex-M4 FP Little Endian Truncate +%UVEXE% -d arm_nnexamples_nn_test.uvprojx -t "ARMCM4_FP_truncate" -j0 + +type NN_TEST.log +del NN_TEST.log + +echo Building NN Test for Cortex-M7 Single Precision Big Endian +%UVEXE% -rb -j0 arm_nnexamples_nn_test.uvprojx -t "ARMCM7b_SP" -o "NN_Test_ARMCM7b_SP_build.log" + +echo Running NN Test for Cortex-M7 Single Precision Big Endian +%UVEXE% -d arm_nnexamples_nn_test.uvprojx -t "ARMCM7b_SP" -j0 + +type NN_TEST.log +del NN_TEST.log + +echo Building NN Test for Cortex-M4 FP Big Endian +%UVEXE% -rb -j0 arm_nnexamples_nn_test.uvprojx -t "ARMCM4b_FP" -o "NN_Test_ARMCM4b_FP_build.log" + +echo Running NN Test for Cortex-M4 FP Big Endian +%UVEXE% -d arm_nnexamples_nn_test.uvprojx -t "ARMCM4b_FP" -j0 + +type NN_TEST.log +del NN_TEST.log + +echo Building NN Test for Cortex-M3 +%UVEXE% -rb -j0 arm_nnexamples_nn_test.uvprojx -t "ARMCM3" -o "NN_Test_ARMCM3_build.log" + +echo Running NN Test for Cortex-M3 +%UVEXE% -d arm_nnexamples_nn_test.uvprojx -t "ARMCM3" -j0 + +type NN_TEST.log +del NN_TEST.log
\ No newline at end of file |