diff options
Diffstat (limited to 'DSP_Lib/Source/FilteringFunctions/arm_fir_sparse_f32.c')
-rw-r--r-- | DSP_Lib/Source/FilteringFunctions/arm_fir_sparse_f32.c | 444 |
1 files changed, 444 insertions, 0 deletions
diff --git a/DSP_Lib/Source/FilteringFunctions/arm_fir_sparse_f32.c b/DSP_Lib/Source/FilteringFunctions/arm_fir_sparse_f32.c new file mode 100644 index 0000000..9ef8edf --- /dev/null +++ b/DSP_Lib/Source/FilteringFunctions/arm_fir_sparse_f32.c @@ -0,0 +1,444 @@ +/* ---------------------------------------------------------------------- +* Copyright (C) 2010-2014 ARM Limited. All rights reserved. +* +* $Date: 19. March 2015 +* $Revision: V.1.4.5 +* +* Project: CMSIS DSP Library +* Title: arm_fir_sparse_f32.c +* +* Description: Floating-point sparse FIR filter processing function. +* +* Target Processor: Cortex-M4/Cortex-M3/Cortex-M0 +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* - Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* - Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in +* the documentation and/or other materials provided with the +* distribution. +* - Neither the name of ARM LIMITED nor the names of its contributors +* may be used to endorse or promote products derived from this +* software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +* POSSIBILITY OF SUCH DAMAGE. +* ------------------------------------------------------------------- */ +#include "arm_math.h" + +/** + * @ingroup groupFilters + */ + +/** + * @defgroup FIR_Sparse Finite Impulse Response (FIR) Sparse Filters + * + * This group of functions implements sparse FIR filters. + * Sparse FIR filters are equivalent to standard FIR filters except that most of the coefficients are equal to zero. + * Sparse filters are used for simulating reflections in communications and audio applications. + * + * There are separate functions for Q7, Q15, Q31, and floating-point data types. + * The functions operate on blocks of input and output data and each call to the function processes + * <code>blockSize</code> samples through the filter. <code>pSrc</code> and + * <code>pDst</code> points to input and output arrays respectively containing <code>blockSize</code> values. + * + * \par Algorithm: + * The sparse filter instant structure contains an array of tap indices <code>pTapDelay</code> which specifies the locations of the non-zero coefficients. + * This is in addition to the coefficient array <code>b</code>. + * The implementation essentially skips the multiplications by zero and leads to an efficient realization. + * <pre> + * y[n] = b[0] * x[n-pTapDelay[0]] + b[1] * x[n-pTapDelay[1]] + b[2] * x[n-pTapDelay[2]] + ...+ b[numTaps-1] * x[n-pTapDelay[numTaps-1]] + * </pre> + * \par + * \image html FIRSparse.gif "Sparse FIR filter. b[n] represents the filter coefficients" + * \par + * <code>pCoeffs</code> points to a coefficient array of size <code>numTaps</code>; + * <code>pTapDelay</code> points to an array of nonzero indices and is also of size <code>numTaps</code>; + * <code>pState</code> points to a state array of size <code>maxDelay + blockSize</code>, where + * <code>maxDelay</code> is the largest offset value that is ever used in the <code>pTapDelay</code> array. + * Some of the processing functions also require temporary working buffers. + * + * \par Instance Structure + * The coefficients and state variables for a filter are stored together in an instance data structure. + * A separate instance structure must be defined for each filter. + * Coefficient and offset arrays may be shared among several instances while state variable arrays cannot be shared. + * There are separate instance structure declarations for each of the 4 supported data types. + * + * \par Initialization Functions + * There is also an associated initialization function for each data type. + * The initialization function performs the following operations: + * - Sets the values of the internal structure fields. + * - Zeros out the values in the state buffer. + * To do this manually without calling the init function, assign the follow subfields of the instance structure: + * numTaps, pCoeffs, pTapDelay, maxDelay, stateIndex, pState. Also set all of the values in pState to zero. + * + * \par + * Use of the initialization function is optional. + * However, if the initialization function is used, then the instance structure cannot be placed into a const data section. + * To place an instance structure into a const data section, the instance structure must be manually initialized. + * Set the values in the state buffer to zeros before static initialization. + * The code below statically initializes each of the 4 different data type filter instance structures + * <pre> + *arm_fir_sparse_instance_f32 S = {numTaps, 0, pState, pCoeffs, maxDelay, pTapDelay}; + *arm_fir_sparse_instance_q31 S = {numTaps, 0, pState, pCoeffs, maxDelay, pTapDelay}; + *arm_fir_sparse_instance_q15 S = {numTaps, 0, pState, pCoeffs, maxDelay, pTapDelay}; + *arm_fir_sparse_instance_q7 S = {numTaps, 0, pState, pCoeffs, maxDelay, pTapDelay}; + * </pre> + * \par + * + * \par Fixed-Point Behavior + * Care must be taken when using the fixed-point versions of the sparse FIR filter functions. + * In particular, the overflow and saturation behavior of the accumulator used in each function must be considered. + * Refer to the function specific documentation below for usage guidelines. + */ + +/** + * @addtogroup FIR_Sparse + * @{ + */ + +/** + * @brief Processing function for the floating-point sparse FIR filter. + * @param[in] *S points to an instance of the floating-point sparse FIR structure. + * @param[in] *pSrc points to the block of input data. + * @param[out] *pDst points to the block of output data + * @param[in] *pScratchIn points to a temporary buffer of size blockSize. + * @param[in] blockSize number of input samples to process per call. + * @return none. + */ + +void arm_fir_sparse_f32( + arm_fir_sparse_instance_f32 * S, + float32_t * pSrc, + float32_t * pDst, + float32_t * pScratchIn, + uint32_t blockSize) +{ + + float32_t *pState = S->pState; /* State pointer */ + float32_t *pCoeffs = S->pCoeffs; /* Coefficient pointer */ + float32_t *px; /* Scratch buffer pointer */ + float32_t *py = pState; /* Temporary pointers for state buffer */ + float32_t *pb = pScratchIn; /* Temporary pointers for scratch buffer */ + float32_t *pOut; /* Destination pointer */ + int32_t *pTapDelay = S->pTapDelay; /* Pointer to the array containing offset of the non-zero tap values. */ + uint32_t delaySize = S->maxDelay + blockSize; /* state length */ + uint16_t numTaps = S->numTaps; /* Number of filter coefficients in the filter */ + int32_t readIndex; /* Read index of the state buffer */ + uint32_t tapCnt, blkCnt; /* loop counters */ + float32_t coeff = *pCoeffs++; /* Read the first coefficient value */ + + + + /* BlockSize of Input samples are copied into the state buffer */ + /* StateIndex points to the starting position to write in the state buffer */ + arm_circularWrite_f32((int32_t *) py, delaySize, &S->stateIndex, 1, + (int32_t *) pSrc, 1, blockSize); + + + /* Read Index, from where the state buffer should be read, is calculated. */ + readIndex = ((int32_t) S->stateIndex - (int32_t) blockSize) - *pTapDelay++; + + /* Wraparound of readIndex */ + if(readIndex < 0) + { + readIndex += (int32_t) delaySize; + } + + /* Working pointer for state buffer is updated */ + py = pState; + + /* blockSize samples are read from the state buffer */ + arm_circularRead_f32((int32_t *) py, delaySize, &readIndex, 1, + (int32_t *) pb, (int32_t *) pb, blockSize, 1, + blockSize); + + /* Working pointer for the scratch buffer */ + px = pb; + + /* Working pointer for destination buffer */ + pOut = pDst; + + +#ifndef ARM_MATH_CM0_FAMILY + + /* Run the below code for Cortex-M4 and Cortex-M3 */ + + /* Loop over the blockSize. Unroll by a factor of 4. + * Compute 4 Multiplications at a time. */ + blkCnt = blockSize >> 2u; + + while(blkCnt > 0u) + { + /* Perform Multiplications and store in destination buffer */ + *pOut++ = *px++ * coeff; + *pOut++ = *px++ * coeff; + *pOut++ = *px++ * coeff; + *pOut++ = *px++ * coeff; + + /* Decrement the loop counter */ + blkCnt--; + } + + /* If the blockSize is not a multiple of 4, + * compute the remaining samples */ + blkCnt = blockSize % 0x4u; + + while(blkCnt > 0u) + { + /* Perform Multiplications and store in destination buffer */ + *pOut++ = *px++ * coeff; + + /* Decrement the loop counter */ + blkCnt--; + } + + /* Load the coefficient value and + * increment the coefficient buffer for the next set of state values */ + coeff = *pCoeffs++; + + /* Read Index, from where the state buffer should be read, is calculated. */ + readIndex = ((int32_t) S->stateIndex - (int32_t) blockSize) - *pTapDelay++; + + /* Wraparound of readIndex */ + if(readIndex < 0) + { + readIndex += (int32_t) delaySize; + } + + /* Loop over the number of taps. */ + tapCnt = (uint32_t) numTaps - 2u; + + while(tapCnt > 0u) + { + + /* Working pointer for state buffer is updated */ + py = pState; + + /* blockSize samples are read from the state buffer */ + arm_circularRead_f32((int32_t *) py, delaySize, &readIndex, 1, + (int32_t *) pb, (int32_t *) pb, blockSize, 1, + blockSize); + + /* Working pointer for the scratch buffer */ + px = pb; + + /* Working pointer for destination buffer */ + pOut = pDst; + + /* Loop over the blockSize. Unroll by a factor of 4. + * Compute 4 MACS at a time. */ + blkCnt = blockSize >> 2u; + + while(blkCnt > 0u) + { + /* Perform Multiply-Accumulate */ + *pOut++ += *px++ * coeff; + *pOut++ += *px++ * coeff; + *pOut++ += *px++ * coeff; + *pOut++ += *px++ * coeff; + + /* Decrement the loop counter */ + blkCnt--; + } + + /* If the blockSize is not a multiple of 4, + * compute the remaining samples */ + blkCnt = blockSize % 0x4u; + + while(blkCnt > 0u) + { + /* Perform Multiply-Accumulate */ + *pOut++ += *px++ * coeff; + + /* Decrement the loop counter */ + blkCnt--; + } + + /* Load the coefficient value and + * increment the coefficient buffer for the next set of state values */ + coeff = *pCoeffs++; + + /* Read Index, from where the state buffer should be read, is calculated. */ + readIndex = ((int32_t) S->stateIndex - + (int32_t) blockSize) - *pTapDelay++; + + /* Wraparound of readIndex */ + if(readIndex < 0) + { + readIndex += (int32_t) delaySize; + } + + /* Decrement the tap loop counter */ + tapCnt--; + } + + /* Compute last tap without the final read of pTapDelay */ + + /* Working pointer for state buffer is updated */ + py = pState; + + /* blockSize samples are read from the state buffer */ + arm_circularRead_f32((int32_t *) py, delaySize, &readIndex, 1, + (int32_t *) pb, (int32_t *) pb, blockSize, 1, + blockSize); + + /* Working pointer for the scratch buffer */ + px = pb; + + /* Working pointer for destination buffer */ + pOut = pDst; + + /* Loop over the blockSize. Unroll by a factor of 4. + * Compute 4 MACS at a time. */ + blkCnt = blockSize >> 2u; + + while(blkCnt > 0u) + { + /* Perform Multiply-Accumulate */ + *pOut++ += *px++ * coeff; + *pOut++ += *px++ * coeff; + *pOut++ += *px++ * coeff; + *pOut++ += *px++ * coeff; + + /* Decrement the loop counter */ + blkCnt--; + } + + /* If the blockSize is not a multiple of 4, + * compute the remaining samples */ + blkCnt = blockSize % 0x4u; + + while(blkCnt > 0u) + { + /* Perform Multiply-Accumulate */ + *pOut++ += *px++ * coeff; + + /* Decrement the loop counter */ + blkCnt--; + } + +#else + +/* Run the below code for Cortex-M0 */ + + blkCnt = blockSize; + + while(blkCnt > 0u) + { + /* Perform Multiplications and store in destination buffer */ + *pOut++ = *px++ * coeff; + + /* Decrement the loop counter */ + blkCnt--; + } + + /* Load the coefficient value and + * increment the coefficient buffer for the next set of state values */ + coeff = *pCoeffs++; + + /* Read Index, from where the state buffer should be read, is calculated. */ + readIndex = ((int32_t) S->stateIndex - (int32_t) blockSize) - *pTapDelay++; + + /* Wraparound of readIndex */ + if(readIndex < 0) + { + readIndex += (int32_t) delaySize; + } + + /* Loop over the number of taps. */ + tapCnt = (uint32_t) numTaps - 2u; + + while(tapCnt > 0u) + { + + /* Working pointer for state buffer is updated */ + py = pState; + + /* blockSize samples are read from the state buffer */ + arm_circularRead_f32((int32_t *) py, delaySize, &readIndex, 1, + (int32_t *) pb, (int32_t *) pb, blockSize, 1, + blockSize); + + /* Working pointer for the scratch buffer */ + px = pb; + + /* Working pointer for destination buffer */ + pOut = pDst; + + blkCnt = blockSize; + + while(blkCnt > 0u) + { + /* Perform Multiply-Accumulate */ + *pOut++ += *px++ * coeff; + + /* Decrement the loop counter */ + blkCnt--; + } + + /* Load the coefficient value and + * increment the coefficient buffer for the next set of state values */ + coeff = *pCoeffs++; + + /* Read Index, from where the state buffer should be read, is calculated. */ + readIndex = + ((int32_t) S->stateIndex - (int32_t) blockSize) - *pTapDelay++; + + /* Wraparound of readIndex */ + if(readIndex < 0) + { + readIndex += (int32_t) delaySize; + } + + /* Decrement the tap loop counter */ + tapCnt--; + } + + /* Compute last tap without the final read of pTapDelay */ + + /* Working pointer for state buffer is updated */ + py = pState; + + /* blockSize samples are read from the state buffer */ + arm_circularRead_f32((int32_t *) py, delaySize, &readIndex, 1, + (int32_t *) pb, (int32_t *) pb, blockSize, 1, + blockSize); + + /* Working pointer for the scratch buffer */ + px = pb; + + /* Working pointer for destination buffer */ + pOut = pDst; + + blkCnt = blockSize; + + while(blkCnt > 0u) + { + /* Perform Multiply-Accumulate */ + *pOut++ += *px++ * coeff; + + /* Decrement the loop counter */ + blkCnt--; + } + +#endif /* #ifndef ARM_MATH_CM0_FAMILY */ + +} + +/** + * @} end of FIR_Sparse group + */ |