diff options
Diffstat (limited to 'DSP_Lib/Source/FilteringFunctions/arm_conv_partial_fast_opt_q15.c')
-rw-r--r-- | DSP_Lib/Source/FilteringFunctions/arm_conv_partial_fast_opt_q15.c | 768 |
1 files changed, 768 insertions, 0 deletions
diff --git a/DSP_Lib/Source/FilteringFunctions/arm_conv_partial_fast_opt_q15.c b/DSP_Lib/Source/FilteringFunctions/arm_conv_partial_fast_opt_q15.c new file mode 100644 index 0000000..194246f --- /dev/null +++ b/DSP_Lib/Source/FilteringFunctions/arm_conv_partial_fast_opt_q15.c @@ -0,0 +1,768 @@ +/* ---------------------------------------------------------------------- +* Copyright (C) 2010-2014 ARM Limited. All rights reserved. +* +* $Date: 19. March 2015 +* $Revision: V.1.4.5 +* +* Project: CMSIS DSP Library +* Title: arm_conv_partial_fast_opt_q15.c +* +* Description: Fast Q15 Partial convolution. +* +* Target Processor: Cortex-M4/Cortex-M3 +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* - Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* - Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in +* the documentation and/or other materials provided with the +* distribution. +* - Neither the name of ARM LIMITED nor the names of its contributors +* may be used to endorse or promote products derived from this +* software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +* POSSIBILITY OF SUCH DAMAGE. +* -------------------------------------------------------------------- */ + +#include "arm_math.h" + +/** + * @ingroup groupFilters + */ + +/** + * @addtogroup PartialConv + * @{ + */ + +/** + * @brief Partial convolution of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4. + * @param[in] *pSrcA points to the first input sequence. + * @param[in] srcALen length of the first input sequence. + * @param[in] *pSrcB points to the second input sequence. + * @param[in] srcBLen length of the second input sequence. + * @param[out] *pDst points to the location where the output result is written. + * @param[in] firstIndex is the first output sample to start with. + * @param[in] numPoints is the number of output points to be computed. + * @param[in] *pScratch1 points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2. + * @param[in] *pScratch2 points to scratch buffer of size min(srcALen, srcBLen). + * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2]. + * + * See <code>arm_conv_partial_q15()</code> for a slower implementation of this function which uses a 64-bit accumulator to avoid wrap around distortion. + * + * \par Restrictions + * If the silicon does not support unaligned memory access enable the macro UNALIGNED_SUPPORT_DISABLE + * In this case input, output, scratch1 and scratch2 buffers should be aligned by 32-bit + * + */ + +#ifndef UNALIGNED_SUPPORT_DISABLE + +arm_status arm_conv_partial_fast_opt_q15( + q15_t * pSrcA, + uint32_t srcALen, + q15_t * pSrcB, + uint32_t srcBLen, + q15_t * pDst, + uint32_t firstIndex, + uint32_t numPoints, + q15_t * pScratch1, + q15_t * pScratch2) +{ + + q15_t *pOut = pDst; /* output pointer */ + q15_t *pScr1 = pScratch1; /* Temporary pointer for scratch1 */ + q15_t *pScr2 = pScratch2; /* Temporary pointer for scratch1 */ + q31_t acc0, acc1, acc2, acc3; /* Accumulator */ + q31_t x1, x2, x3; /* Temporary variables to hold state and coefficient values */ + q31_t y1, y2; /* State variables */ + q15_t *pIn1; /* inputA pointer */ + q15_t *pIn2; /* inputB pointer */ + q15_t *px; /* Intermediate inputA pointer */ + q15_t *py; /* Intermediate inputB pointer */ + uint32_t j, k, blkCnt; /* loop counter */ + arm_status status; + + uint32_t tapCnt; /* loop count */ + + /* Check for range of output samples to be calculated */ + if((firstIndex + numPoints) > ((srcALen + (srcBLen - 1u)))) + { + /* Set status as ARM_MATH_ARGUMENT_ERROR */ + status = ARM_MATH_ARGUMENT_ERROR; + } + else + { + + /* The algorithm implementation is based on the lengths of the inputs. */ + /* srcB is always made to slide across srcA. */ + /* So srcBLen is always considered as shorter or equal to srcALen */ + if(srcALen >= srcBLen) + { + /* Initialization of inputA pointer */ + pIn1 = pSrcA; + + /* Initialization of inputB pointer */ + pIn2 = pSrcB; + } + else + { + /* Initialization of inputA pointer */ + pIn1 = pSrcB; + + /* Initialization of inputB pointer */ + pIn2 = pSrcA; + + /* srcBLen is always considered as shorter or equal to srcALen */ + j = srcBLen; + srcBLen = srcALen; + srcALen = j; + } + + /* Temporary pointer for scratch2 */ + py = pScratch2; + + /* pointer to take end of scratch2 buffer */ + pScr2 = pScratch2 + srcBLen - 1; + + /* points to smaller length sequence */ + px = pIn2; + + /* Apply loop unrolling and do 4 Copies simultaneously. */ + k = srcBLen >> 2u; + + /* First part of the processing with loop unrolling copies 4 data points at a time. + ** a second loop below copies for the remaining 1 to 3 samples. */ + + /* Copy smaller length input sequence in reverse order into second scratch buffer */ + while(k > 0u) + { + /* copy second buffer in reversal manner */ + *pScr2-- = *px++; + *pScr2-- = *px++; + *pScr2-- = *px++; + *pScr2-- = *px++; + + /* Decrement the loop counter */ + k--; + } + + /* If the count is not a multiple of 4, copy remaining samples here. + ** No loop unrolling is used. */ + k = srcBLen % 0x4u; + + while(k > 0u) + { + /* copy second buffer in reversal manner for remaining samples */ + *pScr2-- = *px++; + + /* Decrement the loop counter */ + k--; + } + + /* Initialze temporary scratch pointer */ + pScr1 = pScratch1; + + /* Assuming scratch1 buffer is aligned by 32-bit */ + /* Fill (srcBLen - 1u) zeros in scratch buffer */ + arm_fill_q15(0, pScr1, (srcBLen - 1u)); + + /* Update temporary scratch pointer */ + pScr1 += (srcBLen - 1u); + + /* Copy bigger length sequence(srcALen) samples in scratch1 buffer */ + + /* Copy (srcALen) samples in scratch buffer */ + arm_copy_q15(pIn1, pScr1, srcALen); + + /* Update pointers */ + pScr1 += srcALen; + + /* Fill (srcBLen - 1u) zeros at end of scratch buffer */ + arm_fill_q15(0, pScr1, (srcBLen - 1u)); + + /* Update pointer */ + pScr1 += (srcBLen - 1u); + + /* Initialization of pIn2 pointer */ + pIn2 = py; + + pScratch1 += firstIndex; + + pOut = pDst + firstIndex; + + /* First part of the processing with loop unrolling process 4 data points at a time. + ** a second loop below process for the remaining 1 to 3 samples. */ + + /* Actual convolution process starts here */ + blkCnt = (numPoints) >> 2; + + while(blkCnt > 0) + { + /* Initialze temporary scratch pointer as scratch1 */ + pScr1 = pScratch1; + + /* Clear Accumlators */ + acc0 = 0; + acc1 = 0; + acc2 = 0; + acc3 = 0; + + /* Read two samples from scratch1 buffer */ + x1 = *__SIMD32(pScr1)++; + + /* Read next two samples from scratch1 buffer */ + x2 = *__SIMD32(pScr1)++; + + tapCnt = (srcBLen) >> 2u; + + while(tapCnt > 0u) + { + + /* Read four samples from smaller buffer */ + y1 = _SIMD32_OFFSET(pIn2); + y2 = _SIMD32_OFFSET(pIn2 + 2u); + + /* multiply and accumlate */ + acc0 = __SMLAD(x1, y1, acc0); + acc2 = __SMLAD(x2, y1, acc2); + + /* pack input data */ +#ifndef ARM_MATH_BIG_ENDIAN + x3 = __PKHBT(x2, x1, 0); +#else + x3 = __PKHBT(x1, x2, 0); +#endif + + /* multiply and accumlate */ + acc1 = __SMLADX(x3, y1, acc1); + + /* Read next two samples from scratch1 buffer */ + x1 = _SIMD32_OFFSET(pScr1); + + /* multiply and accumlate */ + acc0 = __SMLAD(x2, y2, acc0); + + acc2 = __SMLAD(x1, y2, acc2); + + /* pack input data */ +#ifndef ARM_MATH_BIG_ENDIAN + x3 = __PKHBT(x1, x2, 0); +#else + x3 = __PKHBT(x2, x1, 0); +#endif + + acc3 = __SMLADX(x3, y1, acc3); + acc1 = __SMLADX(x3, y2, acc1); + + x2 = _SIMD32_OFFSET(pScr1 + 2u); + +#ifndef ARM_MATH_BIG_ENDIAN + x3 = __PKHBT(x2, x1, 0); +#else + x3 = __PKHBT(x1, x2, 0); +#endif + + acc3 = __SMLADX(x3, y2, acc3); + + /* update scratch pointers */ + pIn2 += 4u; + pScr1 += 4u; + + + /* Decrement the loop counter */ + tapCnt--; + } + + /* Update scratch pointer for remaining samples of smaller length sequence */ + pScr1 -= 4u; + + /* apply same above for remaining samples of smaller length sequence */ + tapCnt = (srcBLen) & 3u; + + while(tapCnt > 0u) + { + + /* accumlate the results */ + acc0 += (*pScr1++ * *pIn2); + acc1 += (*pScr1++ * *pIn2); + acc2 += (*pScr1++ * *pIn2); + acc3 += (*pScr1++ * *pIn2++); + + pScr1 -= 3u; + + /* Decrement the loop counter */ + tapCnt--; + } + + blkCnt--; + + + /* Store the results in the accumulators in the destination buffer. */ + +#ifndef ARM_MATH_BIG_ENDIAN + + *__SIMD32(pOut)++ = + __PKHBT(__SSAT((acc0 >> 15), 16), __SSAT((acc1 >> 15), 16), 16); + *__SIMD32(pOut)++ = + __PKHBT(__SSAT((acc2 >> 15), 16), __SSAT((acc3 >> 15), 16), 16); + +#else + + *__SIMD32(pOut)++ = + __PKHBT(__SSAT((acc1 >> 15), 16), __SSAT((acc0 >> 15), 16), 16); + *__SIMD32(pOut)++ = + __PKHBT(__SSAT((acc3 >> 15), 16), __SSAT((acc2 >> 15), 16), 16); + +#endif /* #ifndef ARM_MATH_BIG_ENDIAN */ + + /* Initialization of inputB pointer */ + pIn2 = py; + + pScratch1 += 4u; + + } + + + blkCnt = numPoints & 0x3; + + /* Calculate convolution for remaining samples of Bigger length sequence */ + while(blkCnt > 0) + { + /* Initialze temporary scratch pointer as scratch1 */ + pScr1 = pScratch1; + + /* Clear Accumlators */ + acc0 = 0; + + tapCnt = (srcBLen) >> 1u; + + while(tapCnt > 0u) + { + + /* Read next two samples from scratch1 buffer */ + x1 = *__SIMD32(pScr1)++; + + /* Read two samples from smaller buffer */ + y1 = *__SIMD32(pIn2)++; + + acc0 = __SMLAD(x1, y1, acc0); + + /* Decrement the loop counter */ + tapCnt--; + } + + tapCnt = (srcBLen) & 1u; + + /* apply same above for remaining samples of smaller length sequence */ + while(tapCnt > 0u) + { + + /* accumlate the results */ + acc0 += (*pScr1++ * *pIn2++); + + /* Decrement the loop counter */ + tapCnt--; + } + + blkCnt--; + + /* The result is in 2.30 format. Convert to 1.15 with saturation. + ** Then store the output in the destination buffer. */ + *pOut++ = (q15_t) (__SSAT((acc0 >> 15), 16)); + + /* Initialization of inputB pointer */ + pIn2 = py; + + pScratch1 += 1u; + + } + /* set status as ARM_MATH_SUCCESS */ + status = ARM_MATH_SUCCESS; + } + /* Return to application */ + return (status); +} + +#else + +arm_status arm_conv_partial_fast_opt_q15( + q15_t * pSrcA, + uint32_t srcALen, + q15_t * pSrcB, + uint32_t srcBLen, + q15_t * pDst, + uint32_t firstIndex, + uint32_t numPoints, + q15_t * pScratch1, + q15_t * pScratch2) +{ + + q15_t *pOut = pDst; /* output pointer */ + q15_t *pScr1 = pScratch1; /* Temporary pointer for scratch1 */ + q15_t *pScr2 = pScratch2; /* Temporary pointer for scratch1 */ + q31_t acc0, acc1, acc2, acc3; /* Accumulator */ + q15_t *pIn1; /* inputA pointer */ + q15_t *pIn2; /* inputB pointer */ + q15_t *px; /* Intermediate inputA pointer */ + q15_t *py; /* Intermediate inputB pointer */ + uint32_t j, k, blkCnt; /* loop counter */ + arm_status status; /* Status variable */ + uint32_t tapCnt; /* loop count */ + q15_t x10, x11, x20, x21; /* Temporary variables to hold srcA buffer */ + q15_t y10, y11; /* Temporary variables to hold srcB buffer */ + + + /* Check for range of output samples to be calculated */ + if((firstIndex + numPoints) > ((srcALen + (srcBLen - 1u)))) + { + /* Set status as ARM_MATH_ARGUMENT_ERROR */ + status = ARM_MATH_ARGUMENT_ERROR; + } + else + { + + /* The algorithm implementation is based on the lengths of the inputs. */ + /* srcB is always made to slide across srcA. */ + /* So srcBLen is always considered as shorter or equal to srcALen */ + if(srcALen >= srcBLen) + { + /* Initialization of inputA pointer */ + pIn1 = pSrcA; + + /* Initialization of inputB pointer */ + pIn2 = pSrcB; + } + else + { + /* Initialization of inputA pointer */ + pIn1 = pSrcB; + + /* Initialization of inputB pointer */ + pIn2 = pSrcA; + + /* srcBLen is always considered as shorter or equal to srcALen */ + j = srcBLen; + srcBLen = srcALen; + srcALen = j; + } + + /* Temporary pointer for scratch2 */ + py = pScratch2; + + /* pointer to take end of scratch2 buffer */ + pScr2 = pScratch2 + srcBLen - 1; + + /* points to smaller length sequence */ + px = pIn2; + + /* Apply loop unrolling and do 4 Copies simultaneously. */ + k = srcBLen >> 2u; + + /* First part of the processing with loop unrolling copies 4 data points at a time. + ** a second loop below copies for the remaining 1 to 3 samples. */ + while(k > 0u) + { + /* copy second buffer in reversal manner */ + *pScr2-- = *px++; + *pScr2-- = *px++; + *pScr2-- = *px++; + *pScr2-- = *px++; + + /* Decrement the loop counter */ + k--; + } + + /* If the count is not a multiple of 4, copy remaining samples here. + ** No loop unrolling is used. */ + k = srcBLen % 0x4u; + + while(k > 0u) + { + /* copy second buffer in reversal manner for remaining samples */ + *pScr2-- = *px++; + + /* Decrement the loop counter */ + k--; + } + + /* Initialze temporary scratch pointer */ + pScr1 = pScratch1; + + /* Fill (srcBLen - 1u) zeros in scratch buffer */ + arm_fill_q15(0, pScr1, (srcBLen - 1u)); + + /* Update temporary scratch pointer */ + pScr1 += (srcBLen - 1u); + + /* Copy bigger length sequence(srcALen) samples in scratch1 buffer */ + + + /* Apply loop unrolling and do 4 Copies simultaneously. */ + k = srcALen >> 2u; + + /* First part of the processing with loop unrolling copies 4 data points at a time. + ** a second loop below copies for the remaining 1 to 3 samples. */ + while(k > 0u) + { + /* copy second buffer in reversal manner */ + *pScr1++ = *pIn1++; + *pScr1++ = *pIn1++; + *pScr1++ = *pIn1++; + *pScr1++ = *pIn1++; + + /* Decrement the loop counter */ + k--; + } + + /* If the count is not a multiple of 4, copy remaining samples here. + ** No loop unrolling is used. */ + k = srcALen % 0x4u; + + while(k > 0u) + { + /* copy second buffer in reversal manner for remaining samples */ + *pScr1++ = *pIn1++; + + /* Decrement the loop counter */ + k--; + } + + + /* Apply loop unrolling and do 4 Copies simultaneously. */ + k = (srcBLen - 1u) >> 2u; + + /* First part of the processing with loop unrolling copies 4 data points at a time. + ** a second loop below copies for the remaining 1 to 3 samples. */ + while(k > 0u) + { + /* copy second buffer in reversal manner */ + *pScr1++ = 0; + *pScr1++ = 0; + *pScr1++ = 0; + *pScr1++ = 0; + + /* Decrement the loop counter */ + k--; + } + + /* If the count is not a multiple of 4, copy remaining samples here. + ** No loop unrolling is used. */ + k = (srcBLen - 1u) % 0x4u; + + while(k > 0u) + { + /* copy second buffer in reversal manner for remaining samples */ + *pScr1++ = 0; + + /* Decrement the loop counter */ + k--; + } + + + /* Initialization of pIn2 pointer */ + pIn2 = py; + + pScratch1 += firstIndex; + + pOut = pDst + firstIndex; + + /* Actual convolution process starts here */ + blkCnt = (numPoints) >> 2; + + while(blkCnt > 0) + { + /* Initialze temporary scratch pointer as scratch1 */ + pScr1 = pScratch1; + + /* Clear Accumlators */ + acc0 = 0; + acc1 = 0; + acc2 = 0; + acc3 = 0; + + /* Read two samples from scratch1 buffer */ + x10 = *pScr1++; + x11 = *pScr1++; + + /* Read next two samples from scratch1 buffer */ + x20 = *pScr1++; + x21 = *pScr1++; + + tapCnt = (srcBLen) >> 2u; + + while(tapCnt > 0u) + { + + /* Read two samples from smaller buffer */ + y10 = *pIn2; + y11 = *(pIn2 + 1u); + + /* multiply and accumlate */ + acc0 += (q31_t) x10 *y10; + acc0 += (q31_t) x11 *y11; + acc2 += (q31_t) x20 *y10; + acc2 += (q31_t) x21 *y11; + + /* multiply and accumlate */ + acc1 += (q31_t) x11 *y10; + acc1 += (q31_t) x20 *y11; + + /* Read next two samples from scratch1 buffer */ + x10 = *pScr1; + x11 = *(pScr1 + 1u); + + /* multiply and accumlate */ + acc3 += (q31_t) x21 *y10; + acc3 += (q31_t) x10 *y11; + + /* Read next two samples from scratch2 buffer */ + y10 = *(pIn2 + 2u); + y11 = *(pIn2 + 3u); + + /* multiply and accumlate */ + acc0 += (q31_t) x20 *y10; + acc0 += (q31_t) x21 *y11; + acc2 += (q31_t) x10 *y10; + acc2 += (q31_t) x11 *y11; + acc1 += (q31_t) x21 *y10; + acc1 += (q31_t) x10 *y11; + + /* Read next two samples from scratch1 buffer */ + x20 = *(pScr1 + 2); + x21 = *(pScr1 + 3); + + /* multiply and accumlate */ + acc3 += (q31_t) x11 *y10; + acc3 += (q31_t) x20 *y11; + + /* update scratch pointers */ + pIn2 += 4u; + pScr1 += 4u; + + /* Decrement the loop counter */ + tapCnt--; + } + + /* Update scratch pointer for remaining samples of smaller length sequence */ + pScr1 -= 4u; + + /* apply same above for remaining samples of smaller length sequence */ + tapCnt = (srcBLen) & 3u; + + while(tapCnt > 0u) + { + /* accumlate the results */ + acc0 += (*pScr1++ * *pIn2); + acc1 += (*pScr1++ * *pIn2); + acc2 += (*pScr1++ * *pIn2); + acc3 += (*pScr1++ * *pIn2++); + + pScr1 -= 3u; + + /* Decrement the loop counter */ + tapCnt--; + } + + blkCnt--; + + + /* Store the results in the accumulators in the destination buffer. */ + *pOut++ = __SSAT((acc0 >> 15), 16); + *pOut++ = __SSAT((acc1 >> 15), 16); + *pOut++ = __SSAT((acc2 >> 15), 16); + *pOut++ = __SSAT((acc3 >> 15), 16); + + /* Initialization of inputB pointer */ + pIn2 = py; + + pScratch1 += 4u; + + } + + + blkCnt = numPoints & 0x3; + + /* Calculate convolution for remaining samples of Bigger length sequence */ + while(blkCnt > 0) + { + /* Initialze temporary scratch pointer as scratch1 */ + pScr1 = pScratch1; + + /* Clear Accumlators */ + acc0 = 0; + + tapCnt = (srcBLen) >> 1u; + + while(tapCnt > 0u) + { + + /* Read next two samples from scratch1 buffer */ + x10 = *pScr1++; + x11 = *pScr1++; + + /* Read two samples from smaller buffer */ + y10 = *pIn2++; + y11 = *pIn2++; + + /* multiply and accumlate */ + acc0 += (q31_t) x10 *y10; + acc0 += (q31_t) x11 *y11; + + /* Decrement the loop counter */ + tapCnt--; + } + + tapCnt = (srcBLen) & 1u; + + /* apply same above for remaining samples of smaller length sequence */ + while(tapCnt > 0u) + { + + /* accumlate the results */ + acc0 += (*pScr1++ * *pIn2++); + + /* Decrement the loop counter */ + tapCnt--; + } + + blkCnt--; + + /* Store the result in the accumulator in the destination buffer. */ + *pOut++ = (q15_t) (__SSAT((acc0 >> 15), 16)); + + /* Initialization of inputB pointer */ + pIn2 = py; + + pScratch1 += 1u; + + } + + /* set status as ARM_MATH_SUCCESS */ + status = ARM_MATH_SUCCESS; + + } + + /* Return to application */ + return (status); +} + +#endif /* #ifndef UNALIGNED_SUPPORT_DISABLE */ + +/** + * @} end of PartialConv group + */ |