Official ARM version: v5.4.0

    Add CMSIS V5.4.0, please refer to index.html available under \docs folder.

    Note: content of \CMSIS\Core\Include has been copied under \Include to keep the same structure
         used in existing projects, and thus avoid projects mass update
    Note: the following components have been removed from ARM original delivery (as not used in ST packages)
        - CMSIS_EW2018.pdf
        - .gitattributes
        - .gitignore
        - \Device
        - \CMSIS
           - \CoreValidation
		   - \DAP
           - \Documentation
           - \DoxyGen
           - \Driver
           - \Pack
           - \RTOS\CMSIS_RTOS_Tutorial.pdf
           - \RTOS\RTX
           - \RTOS\Template
           - \RTOS2\RTX
           - \Utilities
           - All ARM/GCC projects files are deleted from \DSP, \RTOS and \RTOS2

Change-Id: Ia026c3f0f0d016627a4fb5a9032852c33d24b4d3

1 files changed, 410 insertions, 0 deletions

diff --git a/Core_A/Source/irq_ctrl_gic.c b/Core_A/Source/irq_ctrl_gic.c
new file mode 100644
index 0000000..25d1359
--- /dev/null
+++ b/Core_A/Source/irq_ctrl_gic.c
@@ -0,0 +1,410 @@
+/**************************************************************************//**
+ * @file     irq_ctrl_gic.c
+ * @brief    Interrupt controller handling implementation for GIC
+ * @version  V1.0.1
+ * @date     9. April 2018
+ ******************************************************************************/
+/*
+ * Copyright (c) 2017 ARM Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <stddef.h>
+
+#include "RTE_Components.h"
+#include CMSIS_device_header
+
+#include "irq_ctrl.h"
+
+#if defined(__GIC_PRESENT) && (__GIC_PRESENT == 1U)
+
+/// Number of implemented interrupt lines
+#ifndef IRQ_GIC_LINE_COUNT
+#define IRQ_GIC_LINE_COUNT      (1020U)
+#endif
+
+static IRQHandler_t IRQTable[IRQ_GIC_LINE_COUNT] = { 0U };
+static uint32_t     IRQ_ID0;
+
+/// Initialize interrupt controller.
+__WEAK int32_t IRQ_Initialize (void) {
+  uint32_t i;
+
+  for (i = 0U; i < IRQ_GIC_LINE_COUNT; i++) {
+    IRQTable[i] = (IRQHandler_t)NULL;
+  }
+  GIC_Enable();
+  return (0);
+}
+
+
+/// Register interrupt handler.
+__WEAK int32_t IRQ_SetHandler (IRQn_ID_t irqn, IRQHandler_t handler) {
+  int32_t status;
+
+  if ((irqn >= 0) && (irqn < (IRQn_ID_t)IRQ_GIC_LINE_COUNT)) {
+    IRQTable[irqn] = handler;
+    status =  0;
+  } else {
+    status = -1;
+  }
+
+  return (status);
+}
+
+
+/// Get the registered interrupt handler.
+__WEAK IRQHandler_t IRQ_GetHandler (IRQn_ID_t irqn) {
+  IRQHandler_t h;
+
+  // Ignore CPUID field (software generated interrupts)
+  irqn &= 0x3FFU;
+
+  if ((irqn >= 0) && (irqn < (IRQn_ID_t)IRQ_GIC_LINE_COUNT)) {
+    h = IRQTable[irqn];
+  } else {
+    h = (IRQHandler_t)0;
+  }
+
+  return (h);
+}
+
+
+/// Enable interrupt.
+__WEAK int32_t IRQ_Enable (IRQn_ID_t irqn) {
+  int32_t status;
+
+  if ((irqn >= 0) && (irqn < (IRQn_ID_t)IRQ_GIC_LINE_COUNT)) {
+    GIC_EnableIRQ ((IRQn_Type)irqn);
+    status = 0;
+  } else {
+    status = -1;
+  }
+
+  return (status);
+}
+
+
+/// Disable interrupt.
+__WEAK int32_t IRQ_Disable (IRQn_ID_t irqn) {
+  int32_t status;
+
+  if ((irqn >= 0) && (irqn < (IRQn_ID_t)IRQ_GIC_LINE_COUNT)) {
+    GIC_DisableIRQ ((IRQn_Type)irqn);
+    status = 0;
+  } else {
+    status = -1;
+  }
+
+  return (status);
+}
+
+
+/// Get interrupt enable state.
+__WEAK uint32_t IRQ_GetEnableState (IRQn_ID_t irqn) {
+  uint32_t enable;
+
+  if ((irqn >= 0) && (irqn < (IRQn_ID_t)IRQ_GIC_LINE_COUNT)) {
+    enable = GIC_GetEnableIRQ((IRQn_Type)irqn);
+  } else {
+    enable = 0U;
+  }
+
+  return (enable);
+}
+
+
+/// Configure interrupt request mode.
+__WEAK int32_t IRQ_SetMode (IRQn_ID_t irqn, uint32_t mode) {
+  uint32_t val;
+  uint8_t cfg;
+  uint8_t secure;
+  uint8_t cpu;
+  int32_t status = 0;
+
+  if ((irqn >= 0) && (irqn < (IRQn_ID_t)IRQ_GIC_LINE_COUNT)) {
+    // Check triggering mode
+    val = (mode & IRQ_MODE_TRIG_Msk);
+
+    if (val == IRQ_MODE_TRIG_LEVEL) {
+      cfg = 0x00U;
+    } else if (val == IRQ_MODE_TRIG_EDGE) {
+      cfg = 0x02U;
+    } else {
+      cfg = 0x00U;
+      status = -1;
+    }
+
+    // Check interrupt type
+    val = mode & IRQ_MODE_TYPE_Msk;
+
+    if (val != IRQ_MODE_TYPE_IRQ) {
+      status = -1;
+    }
+
+    // Check interrupt domain
+    val = mode & IRQ_MODE_DOMAIN_Msk;
+
+    if (val == IRQ_MODE_DOMAIN_NONSECURE) {
+      secure = 0U;
+    } else {
+      // Check security extensions support
+      val = GIC_DistributorInfo() & (1UL << 10U);
+
+      if (val != 0U) {
+        // Security extensions are supported
+        secure = 1U;
+      } else {
+        secure = 0U;
+        status = -1;
+      }
+    }
+
+    // Check interrupt CPU targets
+    val = mode & IRQ_MODE_CPU_Msk;
+
+    if (val == IRQ_MODE_CPU_ALL) {
+      cpu = 0xFFU;
+    } else {
+      cpu = val >> IRQ_MODE_CPU_Pos;
+    }
+
+    // Apply configuration if no mode error
+    if (status == 0) {
+      GIC_SetConfiguration((IRQn_Type)irqn, cfg);
+      GIC_SetTarget       ((IRQn_Type)irqn, cpu);
+
+      if (secure != 0U) {
+        GIC_SetGroup ((IRQn_Type)irqn, secure);
+      }
+    }
+  }
+
+  return (status);
+}
+
+
+/// Get interrupt mode configuration.
+__WEAK uint32_t IRQ_GetMode (IRQn_ID_t irqn) {
+  uint32_t mode;
+  uint32_t val;
+
+  if ((irqn >= 0) && (irqn < (IRQn_ID_t)IRQ_GIC_LINE_COUNT)) {
+    mode = IRQ_MODE_TYPE_IRQ;
+
+    // Get trigger mode
+    val = GIC_GetConfiguration((IRQn_Type)irqn);
+
+    if ((val & 2U) != 0U) {
+      // Corresponding interrupt is edge triggered
+      mode |= IRQ_MODE_TRIG_EDGE;
+    } else {
+      // Corresponding interrupt is level triggered
+      mode |= IRQ_MODE_TRIG_LEVEL;
+    }
+
+    // Get interrupt CPU targets
+    mode |= GIC_GetTarget ((IRQn_Type)irqn) << IRQ_MODE_CPU_Pos;
+
+  } else {
+    mode = IRQ_MODE_ERROR;
+  }
+
+  return (mode);
+}
+
+
+/// Get ID number of current interrupt request (IRQ).
+__WEAK IRQn_ID_t IRQ_GetActiveIRQ (void) {
+  IRQn_ID_t irqn;
+  uint32_t prio;
+
+  /* Dummy read to avoid GIC 390 errata 801120 */
+  GIC_GetHighPendingIRQ();
+
+  irqn = GIC_AcknowledgePending();
+
+  __DSB();
+
+  /* Workaround GIC 390 errata 733075 (GIC-390_Errata_Notice_v6.pdf, 09-Jul-2014)  */
+  /* The following workaround code is for a single-core system.  It would be       */
+  /* different in a multi-core system.                                             */
+  /* If the ID is 0 or 0x3FE or 0x3FF, then the GIC CPU interface may be locked-up */
+  /* so unlock it, otherwise service the interrupt as normal.                      */
+  /* Special IDs 1020=0x3FC and 1021=0x3FD are reserved values in GICv1 and GICv2  */
+  /* so will not occur here.                                                       */
+
+  if ((irqn == 0) || (irqn >= 0x3FE)) {
+    /* Unlock the CPU interface with a dummy write to Interrupt Priority Register */
+    prio = GIC_GetPriority((IRQn_Type)0);
+    GIC_SetPriority ((IRQn_Type)0, prio);
+
+    __DSB();
+
+    if ((irqn == 0U) && ((GIC_GetIRQStatus ((IRQn_Type)irqn) & 1U) != 0U) && (IRQ_ID0 == 0U)) {
+      /* If the ID is 0, is active and has not been seen before */
+      IRQ_ID0 = 1U;
+    }
+    /* End of Workaround GIC 390 errata 733075 */
+  }
+
+  return (irqn);
+}
+
+
+/// Get ID number of current fast interrupt request (FIQ).
+__WEAK IRQn_ID_t IRQ_GetActiveFIQ (void) {
+  return ((IRQn_ID_t)-1);
+}
+
+
+/// Signal end of interrupt processing.
+__WEAK int32_t IRQ_EndOfInterrupt (IRQn_ID_t irqn) {
+  int32_t status;
+  IRQn_Type irq = (IRQn_Type)irqn;
+
+  irqn &= 0x3FFU;
+
+  if ((irqn >= 0) && (irqn < (IRQn_ID_t)IRQ_GIC_LINE_COUNT)) {
+    GIC_EndInterrupt (irq);
+
+    if (irqn == 0) {
+      IRQ_ID0 = 0U;
+    }
+
+    status = 0;
+  } else {
+    status = -1;
+  }
+
+  return (status);
+}
+
+
+/// Set interrupt pending flag.
+__WEAK int32_t IRQ_SetPending (IRQn_ID_t irqn) {
+  int32_t status;
+
+  if ((irqn >= 0) && (irqn < (IRQn_ID_t)IRQ_GIC_LINE_COUNT)) {
+    GIC_SetPendingIRQ ((IRQn_Type)irqn);
+    status = 0;
+  } else {
+    status = -1;
+  }
+
+  return (status);
+}
+
+/// Get interrupt pending flag.
+__WEAK uint32_t IRQ_GetPending (IRQn_ID_t irqn) {
+  uint32_t pending;
+
+  if ((irqn >= 16) && (irqn < (IRQn_ID_t)IRQ_GIC_LINE_COUNT)) {
+    pending = GIC_GetPendingIRQ ((IRQn_Type)irqn);
+  } else {
+    pending = 0U;
+  }
+
+  return (pending & 1U);
+}
+
+
+/// Clear interrupt pending flag.
+__WEAK int32_t IRQ_ClearPending (IRQn_ID_t irqn) {
+  int32_t status;
+
+  if ((irqn >= 16) && (irqn < (IRQn_ID_t)IRQ_GIC_LINE_COUNT)) {
+    GIC_ClearPendingIRQ ((IRQn_Type)irqn);
+    status = 0;
+  } else {
+    status = -1;
+  }
+
+  return (status);
+}
+
+
+/// Set interrupt priority value.
+__WEAK int32_t IRQ_SetPriority (IRQn_ID_t irqn, uint32_t priority) {
+  int32_t status;
+
+  if ((irqn >= 0) && (irqn < (IRQn_ID_t)IRQ_GIC_LINE_COUNT)) {
+    GIC_SetPriority ((IRQn_Type)irqn, priority);
+    status = 0;
+  } else {
+    status = -1;
+  }
+
+  return (status);
+}
+
+
+/// Get interrupt priority.
+__WEAK uint32_t IRQ_GetPriority (IRQn_ID_t irqn) {
+  uint32_t priority;
+
+  if ((irqn >= 0) && (irqn < (IRQn_ID_t)IRQ_GIC_LINE_COUNT)) {
+    priority = GIC_GetPriority ((IRQn_Type)irqn);
+  } else {
+    priority = IRQ_PRIORITY_ERROR;
+  }
+
+  return (priority);
+}
+
+
+/// Set priority masking threshold.
+__WEAK int32_t IRQ_SetPriorityMask (uint32_t priority) {
+  GIC_SetInterfacePriorityMask (priority);
+  return (0);
+}
+
+
+/// Get priority masking threshold
+__WEAK uint32_t IRQ_GetPriorityMask (void) {
+  return GIC_GetInterfacePriorityMask();
+}
+
+
+/// Set priority grouping field split point
+__WEAK int32_t IRQ_SetPriorityGroupBits (uint32_t bits) {
+  int32_t status;
+
+  if (bits == IRQ_PRIORITY_Msk) {
+    bits = 7U;
+  }
+
+  if (bits < 8U) {
+    GIC_SetBinaryPoint (7U - bits);
+    status = 0;
+  } else {
+    status = -1;
+  }
+
+  return (status);
+}
+
+
+/// Get priority grouping field split point
+__WEAK uint32_t IRQ_GetPriorityGroupBits (void) {
+  uint32_t bp;
+
+  bp = GIC_GetBinaryPoint() & 0x07U;
+
+  return (7U - bp);
+}
+
+#endif