/**
  ******************************************************************************
  * @file    USB_Host/HID_Standalone/Src/usbh_conf.c
  * @author  MCD Application Team
  * @version V1.1.0
  * @date    17-February-2017
  * @brief   USB Host configuration file.
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics International N.V.
  * All rights reserved.</center></h2>
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted, provided that the following conditions are met:
  *
  * 1. Redistribution of source code must retain the above copyright notice,
  *    this list of conditions and the following disclaimer.
  * 2. Redistributions in binary form must reproduce the above copyright notice,
  *    this list of conditions and the following disclaimer in the documentation
  *    and/or other materials provided with the distribution.
  * 3. Neither the name of STMicroelectronics nor the names of other
  *    contributors to this software may be used to endorse or promote products
  *    derived from this software without specific written permission.
  * 4. This software, including modifications and/or derivative works of this
  *    software, must execute solely and exclusively on microcontroller or
  *    microprocessor devices manufactured by or for STMicroelectronics.
  * 5. Redistribution and use of this software other than as permitted under
  *    this license is void and will automatically terminate your rights under
  *    this license.
  *
  * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
  * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
  * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
  * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
  * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
  * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
  * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
  * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
  * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  ******************************************************************************
  */
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_hal.h"
#include "usbh_core.h"

HCD_HandleTypeDef hhcd;

/*******************************************************************************
                       HCD BSP Routines
*******************************************************************************/
/**
  * @brief  Initializes the HCD MSP.
  * @param  hhcd: HCD handle
  * @retval None
  */
void HAL_HCD_MspInit(HCD_HandleTypeDef* hhcd)
{
    GPIO_InitTypeDef GPIO_InitStruct;

    /* Configure USB FS GPIOs */
    __HAL_RCC_GPIOA_CLK_ENABLE();

    GPIO_InitStruct.Pin = (GPIO_PIN_11 | GPIO_PIN_12);
    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
    GPIO_InitStruct.Pull = GPIO_NOPULL;
    GPIO_InitStruct.Speed = GPIO_SPEED_HIGH;
    GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS;
    HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);

    GPIO_InitStruct.Pin = GPIO_PIN_10;
    GPIO_InitStruct.Mode = GPIO_MODE_AF_OD;
    GPIO_InitStruct.Pull = GPIO_PULLUP;
    GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS;
    HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);

    /* Configure POWER_SWITCH IO pin */
    __HAL_RCC_GPIOB_CLK_ENABLE();
    GPIO_InitStruct.Pin = GPIO_PIN_2;
    GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
    GPIO_InitStruct.Pull = GPIO_NOPULL;
    HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);

    /* Enable USB FS Clocks */
    __HAL_RCC_USB_OTG_FS_CLK_ENABLE();

    /* Set USBFS Interrupt priority */
    HAL_NVIC_SetPriority(OTG_FS_IRQn, 6, 0);

    /* Enable USBFS Interrupt */
    HAL_NVIC_EnableIRQ(OTG_FS_IRQn);
}

/**
  * @brief  DeInitializes the HCD MSP.
  * @param  hhcd: HCD handle
  * @retval None
  */
void HAL_HCD_MspDeInit(HCD_HandleTypeDef* hhcd)
{
    /* Disable USB FS Clocks */
    __HAL_RCC_USB_OTG_FS_CLK_DISABLE();
}

/*******************************************************************************
                       LL Driver Callbacks (HCD -> USB Host Library)
*******************************************************************************/

/**
  * @brief  SOF callback.
  * @param  hhcd: HCD handle
  * @retval None
  */
void HAL_HCD_SOF_Callback(HCD_HandleTypeDef* hhcd)
{
    USBH_LL_IncTimer(hhcd->pData);
}

/**
  * @brief  Connect callback.
  * @param  hhcd: HCD handle
  * @retval None
  */
void HAL_HCD_Connect_Callback(HCD_HandleTypeDef* hhcd)
{
    USBH_LL_Connect(hhcd->pData);
}

/**
  * @brief  Disconnect callback.
  * @param  hhcd: HCD handle
  * @retval None
  */
void HAL_HCD_Disconnect_Callback(HCD_HandleTypeDef* hhcd)
{
    USBH_LL_Disconnect(hhcd->pData);
}

/**
  * @brief  Notify URB state change callback.
  * @param  hhcd: HCD handle
  * @param  chnum: Channel number
  * @param  urb_state: URB State
  * @retval None
  */
void HAL_HCD_HC_NotifyURBChange_Callback(HCD_HandleTypeDef* hhcd, uint8_t chnum,
    HCD_URBStateTypeDef urb_state)
{
    /* To be used with OS to sync URB state with the global state machine */
}

/*******************************************************************************
                       LL Driver Interface (USB Host Library --> HCD)
*******************************************************************************/
/**
  * @brief  USBH_LL_Init
  *         Initialize the Low Level portion of the Host driver.
  * @param  phost: Host handle
  * @retval USBH Status
  */
USBH_StatusTypeDef USBH_LL_Init(USBH_HandleTypeDef* phost)
{
    /* Set the LL Driver parameters */
    hhcd.Instance = USB_OTG_FS;
    hhcd.Init.Host_channels = 11;
    hhcd.Init.dma_enable = 0;
    hhcd.Init.low_power_enable = 0;
    hhcd.Init.phy_itface = HCD_PHY_EMBEDDED;
    hhcd.Init.Sof_enable = 0;
    hhcd.Init.speed = HCD_SPEED_FULL;
    hhcd.Init.vbus_sensing_enable = 0;
    hhcd.Init.lpm_enable = 0;

    /* Link the driver to the stack */
    hhcd.pData = phost;
    phost->pData = &hhcd;

    /* Initialize the LL Driver */
    HAL_HCD_Init(&hhcd);

    USBH_LL_SetTimer(phost, HAL_HCD_GetCurrentFrame(&hhcd));

    return USBH_OK;
}

/**
  * @brief  De-Initializes the Low Level portion of the Host driver.
  * @param  phost: Host handle
  * @retval USBH Status
  */
USBH_StatusTypeDef USBH_LL_DeInit(USBH_HandleTypeDef* phost)
{
    HAL_HCD_DeInit(phost->pData);
    return USBH_OK;
}

/**
  * @brief  Starts the Low Level portion of the Host driver.
  * @param  phost: Host handle
  * @retval USBH Status
  */
USBH_StatusTypeDef USBH_LL_Start(USBH_HandleTypeDef* phost)
{
    HAL_HCD_Start(phost->pData);
    return USBH_OK;
}

/**
  * @brief  Stops the Low Level portion of the Host driver.
  * @param  phost: Host handle
  * @retval USBH Status
  */
USBH_StatusTypeDef USBH_LL_Stop(USBH_HandleTypeDef* phost)
{
    HAL_HCD_Stop(phost->pData);
    return USBH_OK;
}

/**
  * @brief  Returns the USB Host Speed from the Low Level Driver.
  * @param  phost: Host handle
  * @retval USBH Speeds
  */
USBH_SpeedTypeDef USBH_LL_GetSpeed(USBH_HandleTypeDef* phost)
{
    USBH_SpeedTypeDef speed = USBH_SPEED_FULL;

    switch (HAL_HCD_GetCurrentSpeed(phost->pData)) {
    case 0:
        speed = USBH_SPEED_HIGH;
        break;

    case 1:
        speed = USBH_SPEED_FULL;
        break;

    case 2:
        speed = USBH_SPEED_LOW;
        break;

    default:
        speed = USBH_SPEED_FULL;
        break;
    }
    return speed;
}

/**
  * @brief  Resets the Host Port of the Low Level Driver.
  * @param  phost: Host handle
  * @retval USBH Status
  */
USBH_StatusTypeDef USBH_LL_ResetPort(USBH_HandleTypeDef* phost)
{
    HAL_HCD_ResetPort(phost->pData);
    return USBH_OK;
}

/**
  * @brief  Returns the last transferred packet size.
  * @param  phost: Host handle
  * @param  pipe: Pipe index
  * @retval Packet Size
  */
uint32_t USBH_LL_GetLastXferSize(USBH_HandleTypeDef* phost, uint8_t pipe)
{
    return HAL_HCD_HC_GetXferCount(phost->pData, pipe);
}

/**
  * @brief  Opens a pipe of the Low Level Driver.
  * @param  phost: Host handle
  * @param  pipe: Pipe index
  * @param  epnum: Endpoint Number
  * @param  dev_address: Device USB address
  * @param  speed: Device Speed
  * @param  ep_type: Endpoint Type
  * @param  mps: Endpoint Max Packet Size
  * @retval USBH Status
  */
USBH_StatusTypeDef USBH_LL_OpenPipe(USBH_HandleTypeDef* phost, uint8_t pipe,
    uint8_t epnum, uint8_t dev_address,
    uint8_t speed, uint8_t ep_type,
    uint16_t mps)
{
    HAL_HCD_HC_Init(phost->pData, pipe, epnum, dev_address, speed, ep_type, mps);
    return USBH_OK;
}

/**
  * @brief  Closes a pipe of the Low Level Driver.
  * @param  phost: Host handle
  * @param  pipe: Pipe index
  * @retval USBH Status
  */
USBH_StatusTypeDef USBH_LL_ClosePipe(USBH_HandleTypeDef* phost, uint8_t pipe)
{
    HAL_HCD_HC_Halt(phost->pData, pipe);
    return USBH_OK;
}

/**
  * @brief  Submits a new URB to the low level driver.
  * @param  phost: Host handle
  * @param  pipe: Pipe index
  *          This parameter can be a value from 1 to 15
  * @param  direction: Channel number
  *          This parameter can be one of these values:
  *           0: Output
  *           1: Input
  * @param  ep_type: Endpoint Type
  *          This parameter can be one of these values:
  *            @arg EP_TYPE_CTRL: Control type
  *            @arg EP_TYPE_ISOC: Isochronous type
  *            @arg EP_TYPE_BULK: Bulk type
  *            @arg EP_TYPE_INTR: Interrupt type
  * @param  token: Endpoint Type
  *          This parameter can be one of these values:
  *            @arg 0: PID_SETUP
  *            @arg 1: PID_DATA
  * @param  pbuff: pointer to URB data
  * @param  length: length of URB data
  * @param  do_ping: activate do ping protocol (for high speed only)
  *          This parameter can be one of these values:
  *           0: do ping inactive
  *           1: do ping active
  * @retval USBH Status
  */
USBH_StatusTypeDef USBH_LL_SubmitURB(USBH_HandleTypeDef* phost, uint8_t pipe,
    uint8_t direction, uint8_t ep_type,
    uint8_t token, uint8_t* pbuff,
    uint16_t length, uint8_t do_ping)
{
    HAL_HCD_HC_SubmitRequest(phost->pData, pipe, direction, ep_type, token, pbuff,
        length, do_ping);
    return USBH_OK;
}

/**
  * @brief  Gets a URB state from the low level driver.
  * @param  phost: Host handle
  * @param  pipe: Pipe index
  *          This parameter can be a value from 1 to 15
  * @retval URB state
  *          This parameter can be one of these values:
  *            @arg URB_IDLE
  *            @arg URB_DONE
  *            @arg URB_NOTREADY
  *            @arg URB_NYET
  *            @arg URB_ERROR
  *            @arg URB_STALL
  */
USBH_URBStateTypeDef USBH_LL_GetURBState(USBH_HandleTypeDef* phost,
    uint8_t pipe)
{
    return (USBH_URBStateTypeDef)HAL_HCD_HC_GetURBState(phost->pData, pipe);
}

/**
  * @brief  Drives VBUS.
  * @param  phost: Host handle
  * @param  state: VBUS state
  *          This parameter can be one of these values:
  *           0: VBUS Active
  *           1: VBUS Inactive
  * @retval USBH Status
  */
USBH_StatusTypeDef USBH_LL_DriverVBUS(USBH_HandleTypeDef* phost,
    uint8_t state)
{
    if (state == 0) {
        HAL_GPIO_WritePin(GPIOB, GPIO_PIN_2, GPIO_PIN_RESET);
    } else {
        HAL_GPIO_WritePin(GPIOB, GPIO_PIN_2, GPIO_PIN_SET);
    }
    HAL_Delay(200);
    return USBH_OK;
}

/**
  * @brief  Sets toggle for a pipe.
  * @param  phost: Host handle
  * @param  pipe: Pipe index
  * @param  toggle: toggle (0/1)
  * @retval USBH Status
  */
USBH_StatusTypeDef USBH_LL_SetToggle(USBH_HandleTypeDef* phost, uint8_t pipe,
    uint8_t toggle)
{
    if (hhcd.hc[pipe].ep_is_in) {
        hhcd.hc[pipe].toggle_in = toggle;
    } else {
        hhcd.hc[pipe].toggle_out = toggle;
    }
    return USBH_OK;
}

/**
  * @brief  Returns the current toggle of a pipe.
  * @param  phost: Host handle
  * @param  pipe: Pipe index
  * @retval toggle (0/1)
  */
uint8_t USBH_LL_GetToggle(USBH_HandleTypeDef* phost, uint8_t pipe)
{
    uint8_t toggle = 0;

    if (hhcd.hc[pipe].ep_is_in) {
        toggle = hhcd.hc[pipe].toggle_in;
    } else {
        toggle = hhcd.hc[pipe].toggle_out;
    }
    return toggle;
}

/**
  * @brief  Delay routine for the USB Host Library
  * @param  Delay: Delay in ms
  * @retval None
  */
void USBH_Delay(uint32_t Delay)
{
#if (USBH_USE_OS == 1)
    osDelay(Delay);
#else
    HAL_Delay(Delay);
#endif
}

/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/