/*
 * This file is part of the libusbhost library
 * hosted at http://github.com/libusbhost/libusbhost
 *
 * Copyright (C) 2015 Amir Hammad <amir.hammad@hotmail.com>
 *
 *
 * libusbhost is free software: you can redistribute it and/or modify
 * it under the terms of the GNU Lesser General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This library is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU Lesser General Public License for more details.
 *
 * You should have received a copy of the GNU Lesser General Public License
 * along with this library.  If not, see <http://www.gnu.org/licenses/>.
 *
 */

#include "usart_helpers.h"			/// provides LOG_PRINTF macros used for debugging
#include "usbh_core.h"				/// provides usbh_init() and usbh_poll()
#include "usbh_lld_stm32f4.h"		/// provides low level usb host driver for stm32f4 platform
#include "usbh_driver_hid.h"		/// provides generic usb device driver for Human Interface Device (HID)
#include "usbh_driver_hub.h"		/// provides usb full speed hub driver (Low speed devices on hub are not supported)

 // STM32f407 compatible
#include <libopencm3/stm32/rcc.h>
#include <libopencm3/stm32/gpio.h>
#include <libopencm3/stm32/usart.h>
#include <libopencm3/stm32/timer.h>
#include <libopencm3/stm32/otg_hs.h>
#include <libopencm3/stm32/otg_fs.h>

#include <stdint.h>
#include <string.h>
#include <stdlib.h>

#define UNUSED(var) ((void)var)

static inline void delay_ms_busy_loop(uint32_t ms) {
	for (volatile uint32_t i = 0; i < 14903*ms; i++);
}


/* Set STM32 to 168 MHz. */
static void clock_setup(void) {
	rcc_clock_setup_hse_3v3(&hse_8mhz_3v3[CLOCK_3V3_168MHZ]);

	rcc_periph_clock_enable(RCC_GPIOA);
	rcc_periph_clock_enable(RCC_GPIOE);

	rcc_periph_clock_enable(RCC_USART1);
	rcc_periph_clock_enable(RCC_USART2);
	rcc_periph_clock_enable(RCC_OTGFS);
	rcc_periph_clock_enable(RCC_OTGHS);
	rcc_periph_clock_enable(RCC_TIM6);
}


/* setup 10kHz timer */
static void tim6_setup(void) {
	timer_reset(TIM6);
	timer_set_prescaler(TIM6, 8400 - 1);	// 84Mhz/10kHz - 1
	timer_set_period(TIM6, 65535);			// Overflow in ~6.5 seconds
	timer_enable_counter(TIM6);
}

static uint32_t tim6_get_time_us(void)
{
	uint32_t cnt = timer_get_counter(TIM6);

	// convert to 1MHz less precise timer value -> units: microseconds
	uint32_t time_us = cnt * 100;

	return time_us;
}

static void gpio_setup(void)
{
    /* D2, D3 LEDs */
	gpio_mode_setup(GPIOA, GPIO_MODE_OUTPUT, GPIO_PUPD_NONE, GPIO6 | GPIO7);

    /* USB OTG FS phy outputs */
	gpio_mode_setup(GPIOA, GPIO_MODE_AF, GPIO_PUPD_NONE, GPIO11 | GPIO12);
	gpio_set_af(GPIOA, GPIO_AF10, GPIO11 | GPIO12);

	/* USART1 (debug) */
	gpio_mode_setup(GPIOA, GPIO_MODE_AF, GPIO_PUPD_NONE, GPIO9 | GPIO10);
	gpio_set_af(GPIOA, GPIO_AF7, GPIO9 | GPIO10);

    /* USART2 (host link) */
	gpio_mode_setup(GPIOA, GPIO_MODE_AF, GPIO_PUPD_NONE, GPIO2 | GPIO3);
	gpio_set_af(GPIOA, GPIO_AF7, GPIO2 | GPIO3);

    /* K0 (PE4)/K1 (PE3) buttons */
	gpio_mode_setup(GPIOE, GPIO_MODE_INPUT, GPIO_PUPD_PULLUP, GPIO3 | GPIO4);
}

static const usbh_dev_driver_t *device_drivers[] = {
	&usbh_hub_driver,
	&usbh_hid_driver,
	NULL
};

static const usbh_low_level_driver_t * const lld_drivers[] = {
	&usbh_lld_stm32f4_driver_fs, // Make sure USE_STM32F4_USBH_DRIVER_FS is defined in usbh_config.h
	NULL
};

static void hid_in_message_handler(uint8_t device_id, const uint8_t *data, uint32_t length)
{
	UNUSED(device_id);
	UNUSED(data);
	if (length < 4) {
		LOG_PRINTF("data too short, type=%d\n", hid_get_type(device_id));
		return;
	}

	// print only first 4 bytes, since every mouse should have at least these four set.
	// Report descriptors are not read by driver for now, so we do not know what each byte means
	LOG_PRINTF("HID EVENT %02X %02X %02X %02X \n", data[0], data[1], data[2], data[3]);
    /*
	if (hid_get_type(device_id) == HID_TYPE_KEYBOARD) {
	}
    */
}

static const hid_config_t hid_config = {
	.hid_in_message_handler = &hid_in_message_handler
};

int main(void)
{
	clock_setup();
	gpio_setup();

	/* provides time_curr_us to usbh_poll function */
	tim6_setup();

	usart_init(USART2, 1000000);
    debug_usart_init();

	LOG_PRINTF("SecureHID device side initializing");

	hid_driver_init(&hid_config);
	hub_driver_init();

	/**
	 * Pass array of supported low level drivers
	 * In case of stm32f407, there are up to two supported OTG hosts on one chip.
	 * Each one can be enabled or disabled in usbh_config.h - optimization for speed
	 *
	 * Pass array of supported device drivers
	 */
	usbh_init(lld_drivers, device_drivers);

	LOG_PRINTF("USB init complete\n");

	while (23) {
		usbh_poll(tim6_get_time_us());
		delay_ms_busy_loop(1); /* approx 1ms interval between usbh_poll() */
	}
	return 0;
}