1 files changed, 0 insertions, 154 deletions
diff --git a/stm32f4xx_hal_conf.h b/stm32f4xx_hal_conf.h
deleted file mode 100644
index 16ffadd..0000000
--- a/stm32f4xx_hal_conf.h
+++ /dev/null
@@ -1,154 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    USB_Host/HID_Standalone/Inc/stm32f4xx_hal_conf.h
-  * @author  MCD Application Team
-  * @version V1.1.0
-  * @date    17-February-2017
-  * @brief   HAL configuration file.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
-  *
-  * Redistribution and use in source and binary forms, with or without
-  *modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright
-  *notice,
-  *      this list of conditions and the following disclaimer in the
-  *documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its
-  *contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-  *ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-  *LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
-  *USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-  *
-  ******************************************************************************
-  */
-
-#ifndef __STM32F4xx_HAL_CONF_H
-#define __STM32F4xx_HAL_CONF_H
-
-#define HAL_MODULE_ENABLED
-
-#include "stm32f4xx_hal_def.h"
-
-#define HAL_RCC_MODULE_ENABLED
-#include "stm32f4xx_hal_rcc.h"
-
-#define HAL_FLASH_MODULE_ENABLED
-#include "stm32f4xx_hal_flash.h"
-
-#define HAL_DMA_MODULE_ENABLED
-#include "stm32f4xx_hal_dma.h"
-
-#define HAL_USART_MODULE_ENABLED
-#include "stm32f4xx_hal_usart.h"
-
-#define HAL_PWR_MODULE_ENABLED
-#include "stm32f4xx_hal_pwr.h"
-
-/* USB host controller foo */
-#define HAL_HCD_MODULE_ENABLED
-#include "stm32f4xx_hal_hcd.h"
-
-/* Whoever needs a HAL for GPIOs... */
-#define HAL_GPIO_MODULE_ENABLED
-#include "stm32f4xx_hal_gpio.h"
-
-/* Why not wrap the wrapper? */
-#define HAL_CORTEX_MODULE_ENABLED
-#include "stm32f4xx_hal_cortex.h"
-
-/*
-#define HAL_DMA2D_MODULE_ENABLED
-#include "stm32f4xx_hal_dma2d.h"
-
-#define HAL_SRAM_MODULE_ENABLED
-#include "stm32f4xx_hal_sram.h"
-
-#define HAL_SDRAM_MODULE_ENABLED
-#include "stm32f4xx_hal_sdram.h"
-
-#define HAL_I2C_MODULE_ENABLED
-#include "stm32f4xx_hal_i2c.h"
-
-#define HAL_LTDC_MODULE_ENABLED
-#include "stm32f4xx_hal_ltdc.h"
-
-#define HAL_DSI_MODULE_ENABLED
-#include "stm32f4xx_hal_dsi.h"
-
-#define HAL_FMPI2C_MODULE_ENABLED
-#include "stm32f4xx_hal_fmpi2c.h"
-*/
-
-#if !defined(HSE_VALUE)
-#if defined(USE_STM32469I_DISCO_REVA)
-#define HSE_VALUE \
-    25000000U /*!< Default value of the External oscillator in Hz */
-#else
-#define HSE_VALUE \
-    8000000U /*!< Default value of the External oscillator in Hz */
-#endif /* USE_STM32469I_DISCO_REVA */
-#endif /* HSE_VALUE */
-
-#if !defined(HSE_STARTUP_TIMEOUT)
-#define HSE_STARTUP_TIMEOUT 100U /*!< Time out for HSE start up, in ms */
-#endif
-
-/* Internal High Speed oscillator (HSI) value. This value is used by the RCC HAL module to compute the system frequency
- * (when HSI is used as system clock source, directly or through the PLL). */
-#if !defined(HSI_VALUE)
-#define HSI_VALUE 16000000U
-#endif
-
-/* Internal Low Speed oscillator (LSI) value. */
-#if !defined(LSI_VALUE)
-#define LSI_VALUE 32000U
-#endif
-
-/* External Low Speed oscillator (LSE) value.  */
-#if !defined(LSE_VALUE)
-#define LSE_VALUE 32768U
-#endif
-
-#if !defined(LSE_STARTUP_TIMEOUT)
-#define LSE_STARTUP_TIMEOUT 5000U
-#endif
-
-/* External clock source for I2S peripheral This value is used by the I2S HAL module to compute the I2S clock source
- * frequency, this source is inserted directly through I2S_CKIN pad. */
-#if !defined(EXTERNAL_CLOCK_VALUE)
-#define EXTERNAL_CLOCK_VALUE 12288000U
-#endif
-
-/* For the HAL */
-#define VDD_VALUE 3300U
-#define TICK_INT_PRIORITY 0x00U
-#define USE_RTOS 0
-#define PREFETCH_ENABLE 1
-#define INSTRUCTION_CACHE_ENABLE 1
-#define DATA_CACHE_ENABLE 1
-
-#define USE_SPI_CRC 1U
-
-#define assert_param(expr) ((void)0U)
-
-#endif