From 18df4064d3783903e352b58732aeb9e12669fbce Mon Sep 17 00:00:00 2001 From: Karl Palsson Date: Mon, 3 Oct 2016 21:17:54 +0000 Subject: usb-rs485: enable rs485 mode. Tested on the f1 with a LA only, but traces look good and as expected. future work to actually hook it up to a rs485 device. --- tests/usb-serial-rs485/main-stm32f103-generic.c | 24 ++++++++++-------------- tests/usb-serial-rs485/syscfg.h | 4 ++-- 2 files changed, 12 insertions(+), 16 deletions(-) (limited to 'tests/usb-serial-rs485') diff --git a/tests/usb-serial-rs485/main-stm32f103-generic.c b/tests/usb-serial-rs485/main-stm32f103-generic.c index 0dacd70..6374d24 100644 --- a/tests/usb-serial-rs485/main-stm32f103-generic.c +++ b/tests/usb-serial-rs485/main-stm32f103-generic.c @@ -99,24 +99,23 @@ void usart2_isr(void) if (usart_get_interrupt_source(USART2, USART_SR_TXE)) { if (ringb_depth(&tx_ring) == 0) { // turn off tx empty interrupts, nothing left to send - usart_disable_tx_interrupt(USART2); + cdcacm_arch_txirq(0, 0); ER_DPRINTF("OFF\n"); // Turn on tx complete interrupts, for rs485 de -// USART_CR1(USART2) |= ~USART_CR1_TCIE; + USART_CR1(USART2) |= USART_CR1_TCIE; } else { int c = ringb_get(&tx_ring); usart_send(USART2, c); } } // usbser-irq-txc? rs485 is auto on some devices, but can be emulated anyway -// if (usart_get_interrupt_source(USART2, USART_SR_TC)) { -// ER_DPRINTF("TC"); -// // turn off the complete irqs, we're done now. -// USART_SR(USART2) &= ~USART_SR_TC; -// USART_CR1(USART2) &= ~USART_CR1_TCIE; -// gpio_clear(LED_TX_PORT, LED_TX_PIN); -// gpio_clear(RS485DE_PORT, RS485DE_PIN); -// } + if (usart_get_interrupt_source(USART2, USART_SR_TC)) { + ER_DPRINTF("TC"); + // turn off the complete irqs, we're done now. + USART_CR1(USART2) &= ~USART_CR1_TCIE; + USART_SR(USART2) &= ~USART_SR_TC; + cdcacm_arch_pin(0, CDCACM_PIN_RS485DE, 0); + } gpio_really(GPIOA, GPIO5, 0); } @@ -185,10 +184,7 @@ int main(void) // IRQ timing rcc_periph_clock_enable(RCC_GPIOA); gpio_set_mode(GPIOA, GPIO_MODE_OUTPUT_50_MHZ, GPIO_CNF_OUTPUT_PUSHPULL, GPIO5); - - -// gpio_mode_setup(RS485DE_PORT, GPIO_MODE_OUTPUT, GPIO_PUPD_NONE, -// RS485DE_PIN); + gpio_set_mode(RS485DE_PORT, GPIO_MODE_OUTPUT_50_MHZ, GPIO_CNF_OUTPUT_PUSHPULL, RS485DE_PIN); usart_setup(); diff --git a/tests/usb-serial-rs485/syscfg.h b/tests/usb-serial-rs485/syscfg.h index 50d36e4..d643af1 100644 --- a/tests/usb-serial-rs485/syscfg.h +++ b/tests/usb-serial-rs485/syscfg.h @@ -34,8 +34,8 @@ extern "C" { #define LED_RX_PIN GPIO13 #define LED_TX_PORT GPIOC #define LED_TX_PIN GPIO13 -#define RS485DE_PORT GPIOB -#define RS485DE_PIN GPIO9 // FIXME? (disconnected, just a pin)) +#define RS485DE_PORT GPIOA +#define RS485DE_PIN GPIO8 /* TODO: should really make a stm32f4discovery.h file... */ #elif defined STM32F4 -- cgit