From 6df66b77ba5b27bce5630694742f2dac57b8d3eb Mon Sep 17 00:00:00 2001 From: jaseg Date: Tue, 17 Jul 2018 15:43:26 +0200 Subject: Isolate usb-serial-rs485 tree --- tests/uart-basic/Makefile.dut-stm32l073rz | 26 ------ tests/uart-basic/Makefile.stm32f072disco | 26 ------ tests/uart-basic/Makefile.stm32f3-disco | 29 ------- tests/uart-basic/Makefile.stm32f4-disco | 29 ------- tests/uart-basic/Makefile.stm32l053disco | 26 ------ tests/uart-basic/Makefile.stm32l476disco | 26 ------ tests/uart-basic/main-dut-stm32l073rz.c | 78 ----------------- tests/uart-basic/main-stm32f072disco.c | 64 -------------- tests/uart-basic/main-stm32f3-disco.c | 136 ------------------------------ tests/uart-basic/main-stm32f4-disco.c | 63 -------------- tests/uart-basic/main-stm32l053disco.c | 78 ----------------- tests/uart-basic/main-stm32l476disco.c | 77 ----------------- tests/uart-basic/uart-basic.c | 71 ---------------- tests/uart-basic/uart-basic.h | 44 ---------- 14 files changed, 773 deletions(-) delete mode 100644 tests/uart-basic/Makefile.dut-stm32l073rz delete mode 100644 tests/uart-basic/Makefile.stm32f072disco delete mode 100644 tests/uart-basic/Makefile.stm32f3-disco delete mode 100644 tests/uart-basic/Makefile.stm32f4-disco delete mode 100644 tests/uart-basic/Makefile.stm32l053disco delete mode 100644 tests/uart-basic/Makefile.stm32l476disco delete mode 100644 tests/uart-basic/main-dut-stm32l073rz.c delete mode 100644 tests/uart-basic/main-stm32f072disco.c delete mode 100644 tests/uart-basic/main-stm32f3-disco.c delete mode 100644 tests/uart-basic/main-stm32f4-disco.c delete mode 100644 tests/uart-basic/main-stm32l053disco.c delete mode 100644 tests/uart-basic/main-stm32l476disco.c delete mode 100644 tests/uart-basic/uart-basic.c delete mode 100644 tests/uart-basic/uart-basic.h (limited to 'tests/uart-basic') diff --git a/tests/uart-basic/Makefile.dut-stm32l073rz b/tests/uart-basic/Makefile.dut-stm32l073rz deleted file mode 100644 index d8575d9..0000000 --- a/tests/uart-basic/Makefile.dut-stm32l073rz +++ /dev/null @@ -1,26 +0,0 @@ -# This is just a makefile. -# Consider it released into the public domain, or, where not available, -# available under your choice of BSD2clause, MIT, X11, ISC or Apache2 licenses -# Karl Palsson -BOARD = dut-stm32l073rz -PROJECT = uart-basic-$(BOARD) -BUILD_DIR = bin-$(BOARD) - -SHARED_DIR = ../../shared - -CFILES = main-$(BOARD).c -CFILES += uart-basic.c - -VPATH += $(SHARED_DIR) - -INCLUDES += $(patsubst %,-I%, . $(SHARED_DIR)) - -OPENCM3_DIR=../../libopencm3/ - -### This section can go to an arch shared rules eventually... -DEVICE=stm32l073rz -#OOCD_INTERFACE = stlink-v2 -#OOCD_TARGET = stm32l0x -OOCD_FILE = ../../openocd/openocd.$(BOARD).cfg - -include ../../rules.mk diff --git a/tests/uart-basic/Makefile.stm32f072disco b/tests/uart-basic/Makefile.stm32f072disco deleted file mode 100644 index c7fd490..0000000 --- a/tests/uart-basic/Makefile.stm32f072disco +++ /dev/null @@ -1,26 +0,0 @@ -# This is just a makefile. -# Consider it released into the public domain, or, where not available, -# available under your choice of BSD2clause, MIT, X11, ISC or Apache2 licenses -# Karl Palsson -BOARD = stm32f072disco -PROJECT = uart-basic-$(BOARD) -BUILD_DIR = bin-$(BOARD) - -SHARED_DIR = ../../shared - -CFILES = main-$(BOARD).c -CFILES += uart-basic.c - -VPATH += $(SHARED_DIR) - -INCLUDES += $(patsubst %,-I%, . $(SHARED_DIR)) - -OPENCM3_DIR=../../libopencm3/ - -### This section can go to an arch shared rules eventually... -DEVICE=stm32f072rb -#OOCD_INTERFACE = stlink-v2 -#OOCD_TARGET = stm32f0x -OOCD_FILE = ../../openocd/openocd.$(BOARD).cfg - -include ../../rules.mk diff --git a/tests/uart-basic/Makefile.stm32f3-disco b/tests/uart-basic/Makefile.stm32f3-disco deleted file mode 100644 index 2320af0..0000000 --- a/tests/uart-basic/Makefile.stm32f3-disco +++ /dev/null @@ -1,29 +0,0 @@ -# This is just a makefile. -# Consider it released into the public domain, or, where not available, -# available under your choice of BSD2clause, MIT, X11, ISC or Apache2 licenses -# Karl Palsson -BOARD = stm32f3-disco -PROJECT = uart-basic-$(BOARD) -BUILD_DIR = bin-$(BOARD) - -SHARED_DIR = ../../shared - -CFILES = main-$(BOARD).c -CFILES += uart-basic.c -# No trace, we're using the uart explicitly here, deliberately. -# Perhaps later we'll use trace differently, or with different files -#CFILES += trace.c trace_stdio.c - -VPATH += $(SHARED_DIR) - -INCLUDES += $(patsubst %,-I%, . $(SHARED_DIR)) - -OPENCM3_DIR=../../libopencm3/ - -### This section can go to an arch shared rules eventually... -DEVICE=stm32f303vct6 -#OOCD_INTERFACE = stlink-v2 -#OOCD_TARGET = stm32f3x -OOCD_FILE = ../../openocd/openocd.stm32f3-disco.cfg - -include ../../rules.mk diff --git a/tests/uart-basic/Makefile.stm32f4-disco b/tests/uart-basic/Makefile.stm32f4-disco deleted file mode 100644 index 40e2e1c..0000000 --- a/tests/uart-basic/Makefile.stm32f4-disco +++ /dev/null @@ -1,29 +0,0 @@ -# This is just a makefile. -# Consider it released into the public domain, or, where not available, -# available under your choice of BSD2clause, MIT, X11, ISC or Apache2 licenses -# Karl Palsson -BOARD = stm32f4-disco -PROJECT = uart-basic-$(BOARD) -BUILD_DIR = bin-$(BOARD) - -SHARED_DIR = ../../shared - -CFILES = main-$(BOARD).c -CFILES += uart-basic.c -# No trace, we're using the uart explicitly here, deliberately. -# Perhaps later we'll use trace differently, or with different files -#CFILES += trace.c trace_stdio.c - -VPATH += $(SHARED_DIR) - -INCLUDES += $(patsubst %,-I%, . $(SHARED_DIR)) - -OPENCM3_DIR=../../libopencm3/ - -### This section can go to an arch shared rules eventually... -DEVICE=stm32f405xg -#OOCD_INTERFACE = stlink-v2 -#OOCD_TARGET = stm32f4x -OOCD_FILE = ../../openocd/openocd.stm32f4-disco.cfg - -include ../../rules.mk diff --git a/tests/uart-basic/Makefile.stm32l053disco b/tests/uart-basic/Makefile.stm32l053disco deleted file mode 100644 index 5858eaf..0000000 --- a/tests/uart-basic/Makefile.stm32l053disco +++ /dev/null @@ -1,26 +0,0 @@ -# This is just a makefile. -# Consider it released into the public domain, or, where not available, -# available under your choice of BSD2clause, MIT, X11, ISC or Apache2 licenses -# Karl Palsson -BOARD = stm32l053disco -PROJECT = uart-basic-$(BOARD) -BUILD_DIR = bin-$(BOARD) - -SHARED_DIR = ../../shared - -CFILES = main-$(BOARD).c -CFILES += uart-basic.c - -VPATH += $(SHARED_DIR) - -INCLUDES += $(patsubst %,-I%, . $(SHARED_DIR)) - -OPENCM3_DIR=../../libopencm3/ - -### This section can go to an arch shared rules eventually... -DEVICE=stm32l053c8 -#OOCD_INTERFACE = stlink-v2 -#OOCD_TARGET = stm32l0x -OOCD_FILE = ../../openocd/openocd.$(BOARD).cfg - -include ../../rules.mk diff --git a/tests/uart-basic/Makefile.stm32l476disco b/tests/uart-basic/Makefile.stm32l476disco deleted file mode 100644 index 79b8ab7..0000000 --- a/tests/uart-basic/Makefile.stm32l476disco +++ /dev/null @@ -1,26 +0,0 @@ -# This is just a makefile. -# Consider it released into the public domain, or, where not available, -# available under your choice of BSD2clause, MIT, X11, ISC or Apache2 licenses -# Karl Palsson -BOARD = stm32l476disco -PROJECT = uart-basic-$(BOARD) -BUILD_DIR = bin-$(BOARD) - -SHARED_DIR = ../../shared - -CFILES = main-$(BOARD).c -CFILES += uart-basic.c - -VPATH += $(SHARED_DIR) - -INCLUDES += $(patsubst %,-I%, . $(SHARED_DIR)) - -OPENCM3_DIR=../../libopencm3/ - -### This section can go to an arch shared rules eventually... -DEVICE=stm32l476vgt6 -#OOCD_INTERFACE = stlink-v2-1 -#OOCD_TARGET = stm32l4x -OOCD_FILE = ../../openocd/openocd.$(BOARD).cfg - -include ../../rules.mk diff --git a/tests/uart-basic/main-dut-stm32l073rz.c b/tests/uart-basic/main-dut-stm32l073rz.c deleted file mode 100644 index 17a68da..0000000 --- a/tests/uart-basic/main-dut-stm32l073rz.c +++ /dev/null @@ -1,78 +0,0 @@ -/* - * Oct 2017 Karl Palsson - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "uart-basic.h" - -#define LED_NUC_RCC RCC_GPIOA -#define LED_NUC_PORT GPIOA -#define LED_NUC_PIN GPIO5 - -void usart2_isr(void) -{ - ub_irq_handler(); -} - -static void setup_rcc_hack(void) -{ - /* FIXME L0 doesn't have rcc setup helpers (yet) */ - rcc_osc_on(RCC_HSI16); - rcc_wait_for_osc_ready(RCC_HSI16); - rcc_set_sysclk_source(RCC_HSI16); - - /* ok, we manually poked around, let the lib know */ - rcc_apb1_frequency = rcc_apb2_frequency = 16e6; -} - -static void board_init(void) -{ - rcc_periph_clock_enable(RCC_GPIOA); - gpio_mode_setup(GPIOA, GPIO_MODE_AF, GPIO_PUPD_NONE, GPIO2 | GPIO3); - /* usart is AF4 */ - gpio_set_af(GPIOA, GPIO_AF4, GPIO2 | GPIO3); -} - -int main(void) -{ - int i; - int j = 0; - setup_rcc_hack(); - board_init(); - struct ub_hw ub = { - .uart = USART2, - .uart_nvic = NVIC_USART2_IRQ, - .uart_rcc = RCC_USART2, - }; - ub_init(&ub); - printf("hi guys!\n"); - /* green led for ticking */ - rcc_periph_clock_enable(LED_NUC_RCC); - gpio_mode_setup(LED_NUC_PORT, GPIO_MODE_OUTPUT, GPIO_PUPD_NONE, - LED_NUC_PIN); - - - while (1) { - gpio_toggle(LED_NUC_PORT, LED_NUC_PIN); - - for (i = 0; i < 0x40000; i++) { /* Wait a bit. */ - __asm__("NOP"); - } - ub_task(); - gpio_toggle(LED_NUC_PORT, LED_NUC_PIN); - for (i = 0; i < 0x40000; i++) { /* Wait a bit. */ - __asm__("NOP"); - } - } - - return 0; -} diff --git a/tests/uart-basic/main-stm32f072disco.c b/tests/uart-basic/main-stm32f072disco.c deleted file mode 100644 index fdd630e..0000000 --- a/tests/uart-basic/main-stm32f072disco.c +++ /dev/null @@ -1,64 +0,0 @@ -/* - * Oct 2017 Karl Palsson - */ - -#include -#include -#include -#include -#include -#include -#include - -#include "uart-basic.h" - -#define LED_DISCO_GREEN_RCC RCC_GPIOC -#define LED_DISCO_GREEN_PORT GPIOC -#define LED_DISCO_GREEN_PIN GPIO9 - -void usart3_4_isr(void) -{ - ub_irq_handler(); -} - -static void board_init(void) { - rcc_periph_clock_enable(RCC_GPIOB); - gpio_mode_setup(GPIOB, GPIO_MODE_AF, GPIO_PUPD_NONE, GPIO10|GPIO11); - /* usart3 is AF4 */ - gpio_set_af(GPIOB, GPIO_AF4, GPIO10|GPIO11); -} - -int main(void) -{ - int i; - int j = 0; - rcc_clock_setup_in_hsi48_out_48mhz(); - board_init(); - struct ub_hw ub = { - .uart = USART3, - .uart_nvic = NVIC_USART3_4_IRQ, - .uart_rcc = RCC_USART3, - }; - ub_init(&ub); - printf("hi guys!\n"); - /* green led for ticking */ - rcc_periph_clock_enable(LED_DISCO_GREEN_RCC); - gpio_mode_setup(LED_DISCO_GREEN_PORT, GPIO_MODE_OUTPUT, GPIO_PUPD_NONE, - LED_DISCO_GREEN_PIN); - - - while (1) { - gpio_toggle(LED_DISCO_GREEN_PORT, LED_DISCO_GREEN_PIN); - - for (i = 0; i < 0xa0000; i++) { /* Wait a bit. */ - __asm__("NOP"); - } - ub_task(); - gpio_toggle(LED_DISCO_GREEN_PORT, LED_DISCO_GREEN_PIN); - for (i = 0; i < 0xa0000; i++) { /* Wait a bit. */ - __asm__("NOP"); - } - } - - return 0; -} diff --git a/tests/uart-basic/main-stm32f3-disco.c b/tests/uart-basic/main-stm32f3-disco.c deleted file mode 100644 index 94c6937..0000000 --- a/tests/uart-basic/main-stm32f3-disco.c +++ /dev/null @@ -1,136 +0,0 @@ -/* - * Oct 2017 Karl Palsson - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#include "uart-basic.h" - -/* f3 pll setup, based on l1/f4*/ - -typedef struct { - uint8_t pll_mul; - uint8_t pll_div; - uint8_t pll_source; - uint32_t flash_config; - uint8_t hpre; - uint8_t ppre1; - uint8_t ppre2; - uint32_t apb1_frequency; - uint32_t apb2_frequency; - uint32_t ahb_frequency; -} rcc_clock_scale_t; - -static void rcc_clock_setup_pll_f3_special(const rcc_clock_scale_t *clock) -{ - /* Turn on the appropriate source for the PLL */ - // TODO, some f3's have extra bits here - enum rcc_osc my_osc; - if (clock->pll_source == RCC_CFGR_PLLSRC_HSE_PREDIV) { - my_osc = RCC_HSE; - } else { - my_osc = RCC_HSI; - } - rcc_osc_on(my_osc); - while (!rcc_is_osc_ready(my_osc)); - - /* Configure flash settings. */ - flash_set_ws(clock->flash_config); - - /* - * Set prescalers for AHB, ADC, ABP1, ABP2. - * Do this before touching the PLL (TODO: why?). - */ - rcc_set_hpre(clock->hpre); - rcc_set_ppre1(clock->ppre1); - rcc_set_ppre2(clock->ppre2); - - rcc_osc_off(RCC_PLL); - while (rcc_is_osc_ready(RCC_PLL)); - rcc_set_pll_source(clock->pll_source); - rcc_set_pll_multiplier(clock->pll_mul); - // TODO - iff pll_div != 0, then maybe we're on a target that - // has the dividers? - - /* Enable PLL oscillator and wait for it to stabilize. */ - rcc_osc_on(RCC_PLL); - while (!rcc_is_osc_ready(RCC_PLL)); - - /* Select PLL as SYSCLK source. */ - rcc_set_sysclk_source(RCC_CFGR_SW_PLL); - rcc_wait_for_sysclk_status(RCC_PLL); - - /* Set the peripheral clock frequencies used. */ - rcc_ahb_frequency = clock->ahb_frequency; - rcc_apb1_frequency = clock->apb1_frequency; - rcc_apb2_frequency = clock->apb2_frequency; -} - -static void setup_clocks(void) -{ - rcc_clock_scale_t clock_full_hse8mhz ={ - .pll_mul = RCC_CFGR_PLLMUL_PLL_IN_CLK_X9, - .pll_source = RCC_CFGR_PLLSRC_HSE_PREDIV, - .hpre = RCC_CFGR_HPRE_DIV_NONE, - .ppre1 = RCC_CFGR_PPRE1_DIV_2, - .ppre2 = RCC_CFGR_PPRE2_DIV_NONE, - .flash_config = FLASH_ACR_PRFTBE | FLASH_ACR_LATENCY_2WS, - .apb1_frequency = 36000000, - .apb2_frequency = 72000000, - .ahb_frequency = 72000000, - }; - - rcc_clock_setup_pll_f3_special(&clock_full_hse8mhz); -} - -void usart2_exti26_isr(void) -{ - ub_irq_handler(); -} - -int main(void) -{ - int i; - int j = 0; - setup_clocks(); - /* Board led */ - rcc_periph_clock_enable(RCC_GPIOE); - gpio_mode_setup(GPIOE, GPIO_MODE_OUTPUT, GPIO_PUPD_NONE, GPIO8); - gpio_set(GPIOE, GPIO8); - - /* board init for uart2 on pa2/3 */ - rcc_periph_clock_enable(RCC_GPIOA); - gpio_mode_setup(GPIOA, GPIO_MODE_AF, GPIO_PUPD_NONE, GPIO2|GPIO3); - /* usart is AF7 */ - gpio_set_af(GPIOA, GPIO_AF7, GPIO2|GPIO3); - - struct ub_hw ub = { - .uart = USART2, - .uart_nvic = NVIC_USART2_EXTI26_IRQ, - .uart_rcc = RCC_USART2, - }; - ub_init(&ub); - printf("hi guys!\n"); - - while (1) { - gpio_toggle(GPIOE, GPIO8); - - for (i = 0; i < 0x100000; i++) { /* Wait a bit. */ - __asm__("NOP"); - } - ub_task(); - gpio_toggle(GPIOE, GPIO8); - for (i = 0; i < 0x100000; i++) { /* Wait a bit. */ - __asm__("NOP"); - } - } - - return 0; -} diff --git a/tests/uart-basic/main-stm32f4-disco.c b/tests/uart-basic/main-stm32f4-disco.c deleted file mode 100644 index 86d9b4a..0000000 --- a/tests/uart-basic/main-stm32f4-disco.c +++ /dev/null @@ -1,63 +0,0 @@ -/* - * Oct 2017 Karl Palsson - */ - -#include -#include -#include -#include -#include -#include -#include - -#include "uart-basic.h" - -#define LED_DISCO_GREEN_PORT GPIOD -#define LED_DISCO_GREEN_PIN GPIO12 - -void usart2_isr(void) -{ - ub_irq_handler(); -} - -static void board_init(void) { - rcc_periph_clock_enable(RCC_GPIOA); - gpio_mode_setup(GPIOA, GPIO_MODE_AF, GPIO_PUPD_NONE, GPIO2|GPIO3); - /* usart is AF7 */ - gpio_set_af(GPIOA, GPIO_AF7, GPIO2|GPIO3); -} - -int main(void) -{ - int i; - int j = 0; - rcc_clock_setup_hse_3v3(&rcc_hse_8mhz_3v3[RCC_CLOCK_3V3_168MHZ]); - rcc_periph_clock_enable(RCC_GPIOD); - board_init(); - struct ub_hw ub = { - .uart = USART2, - .uart_nvic = NVIC_USART2_IRQ, - .uart_rcc = RCC_USART2, - }; - ub_init(&ub); - printf("hi guys!\n"); - /* green led for ticking */ - gpio_mode_setup(LED_DISCO_GREEN_PORT, GPIO_MODE_OUTPUT, GPIO_PUPD_NONE, - LED_DISCO_GREEN_PIN); - - - while (1) { - gpio_toggle(LED_DISCO_GREEN_PORT, LED_DISCO_GREEN_PIN); - - for (i = 0; i < 0x800000; i++) { /* Wait a bit. */ - __asm__("NOP"); - } - ub_task(); - gpio_toggle(LED_DISCO_GREEN_PORT, LED_DISCO_GREEN_PIN); - for (i = 0; i < 0x800000; i++) { /* Wait a bit. */ - __asm__("NOP"); - } - } - - return 0; -} diff --git a/tests/uart-basic/main-stm32l053disco.c b/tests/uart-basic/main-stm32l053disco.c deleted file mode 100644 index 8c97f1d..0000000 --- a/tests/uart-basic/main-stm32l053disco.c +++ /dev/null @@ -1,78 +0,0 @@ -/* - * Oct 2017 Karl Palsson - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "uart-basic.h" - -#define LED_DISCO_GREEN_RCC RCC_GPIOB -#define LED_DISCO_GREEN_PORT GPIOB -#define LED_DISCO_GREEN_PIN GPIO4 - -void usart1_isr(void) -{ - ub_irq_handler(); -} - -static void setup_rcc_hack(void) -{ - /* FIXME L0 doesn't have rcc setup helpers (yet) */ - rcc_osc_on(RCC_HSI16); - rcc_wait_for_osc_ready(RCC_HSI16); - rcc_set_sysclk_source(RCC_HSI16); - - /* ok, we manually poked around, let the lib know */ - rcc_apb1_frequency = rcc_apb2_frequency = 16e6; -} - -static void board_init(void) -{ - rcc_periph_clock_enable(RCC_GPIOA); - gpio_mode_setup(GPIOA, GPIO_MODE_AF, GPIO_PUPD_NONE, GPIO9 | GPIO10); - /* usart1 is AF4 */ - gpio_set_af(GPIOA, GPIO_AF4, GPIO9 | GPIO10); -} - -int main(void) -{ - int i; - int j = 0; - setup_rcc_hack(); - board_init(); - struct ub_hw ub = { - .uart = USART1, - .uart_nvic = NVIC_USART1_IRQ, - .uart_rcc = RCC_USART1, - }; - ub_init(&ub); - printf("hi guys!\n"); - /* green led for ticking */ - rcc_periph_clock_enable(LED_DISCO_GREEN_RCC); - gpio_mode_setup(LED_DISCO_GREEN_PORT, GPIO_MODE_OUTPUT, GPIO_PUPD_NONE, - LED_DISCO_GREEN_PIN); - - - while (1) { - gpio_toggle(LED_DISCO_GREEN_PORT, LED_DISCO_GREEN_PIN); - - for (i = 0; i < 0x40000; i++) { /* Wait a bit. */ - __asm__("NOP"); - } - ub_task(); - gpio_toggle(LED_DISCO_GREEN_PORT, LED_DISCO_GREEN_PIN); - for (i = 0; i < 0x40000; i++) { /* Wait a bit. */ - __asm__("NOP"); - } - } - - return 0; -} diff --git a/tests/uart-basic/main-stm32l476disco.c b/tests/uart-basic/main-stm32l476disco.c deleted file mode 100644 index 82c98f0..0000000 --- a/tests/uart-basic/main-stm32l476disco.c +++ /dev/null @@ -1,77 +0,0 @@ -/* - * Oct 2017 Karl Palsson - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "uart-basic.h" - -#define LED_DISCO_GREEN_RCC RCC_GPIOE -#define LED_DISCO_GREEN_PORT GPIOE -#define LED_DISCO_GREEN_PIN GPIO8 - -void usart2_isr(void) -{ - ub_irq_handler(); -} - -static void setup_rcc_hack(void) -{ - pwr_set_vos_scale(PWR_SCALE1); - flash_set_ws(FLASH_ACR_LATENCY_2WS); - rcc_set_msi_range(RCC_CR_MSIRANGE_48MHZ); - - /* ok, we manually poked around, let the lib know */ - rcc_apb1_frequency = rcc_apb2_frequency = 48e6; -} - -static void board_init(void) -{ - rcc_periph_clock_enable(RCC_GPIOD); - gpio_mode_setup(GPIOD, GPIO_MODE_AF, GPIO_PUPD_NONE, GPIO5 | GPIO6); - /* usart2 is AF7 */ - gpio_set_af(GPIOD, GPIO_AF7, GPIO5 | GPIO6); -} - -int main(void) -{ - int i; - int j = 0; - setup_rcc_hack(); - board_init(); - struct ub_hw ub = { - .uart = USART2, - .uart_nvic = NVIC_USART2_IRQ, - .uart_rcc = RCC_USART2, - }; - ub_init(&ub); - printf("hi guys!\n"); - /* green led for ticking */ - rcc_periph_clock_enable(LED_DISCO_GREEN_RCC); - gpio_mode_setup(LED_DISCO_GREEN_PORT, GPIO_MODE_OUTPUT, GPIO_PUPD_NONE, - LED_DISCO_GREEN_PIN); - - - while (1) { - gpio_toggle(LED_DISCO_GREEN_PORT, LED_DISCO_GREEN_PIN); - - for (i = 0; i < 0xa0000; i++) { /* Wait a bit. */ - __asm__("NOP"); - } - ub_task(); - gpio_toggle(LED_DISCO_GREEN_PORT, LED_DISCO_GREEN_PIN); - for (i = 0; i < 0xa0000; i++) { /* Wait a bit. */ - __asm__("NOP"); - } - } - - return 0; -} diff --git a/tests/uart-basic/uart-basic.c b/tests/uart-basic/uart-basic.c deleted file mode 100644 index 8c5124c..0000000 --- a/tests/uart-basic/uart-basic.c +++ /dev/null @@ -1,71 +0,0 @@ -/* - * Karl Palsson Oct 2017 - * Considered to be available under your choice of: - * BSD2 clause, Apache2, MIT, X11 or ISC licenses - */ - -#include -#include -#include -#include -#include -#include -#include "uart-basic.h" - -/* prototype to make linking happy */ -int _write(int file, char *ptr, int len); - -static struct ub_hw *ub; -static uint8_t last_rxb; - -/* Implement _write for newlib to use printf */ -int _write(int file, char *ptr, int len) -{ - int i; - - if (file == STDOUT_FILENO || file == STDERR_FILENO) { - for (i = 0; i < len; i++) { - if (ptr[i] == '\n') { - usart_send_blocking(ub->uart, '\r'); - } - usart_send_blocking(ub->uart, ptr[i]); - } - return i; - } - errno = EIO; - return -1; -} - -void ub_init(struct ub_hw *ub_input) -{ - ub = ub_input; - rcc_periph_clock_enable(ub->uart_rcc); - - usart_set_baudrate(ub->uart, 115200); - usart_set_databits(ub->uart, 9); - usart_set_stopbits(ub->uart, USART_STOPBITS_1); - usart_set_mode(ub->uart, USART_MODE_TX_RX); - usart_set_parity(ub->uart, USART_PARITY_EVEN); - usart_set_flow_control(ub->uart, USART_FLOWCONTROL_NONE); - - usart_enable_rx_interrupt(ub->uart); - nvic_enable_irq(ub->uart_nvic); - usart_enable(ub->uart); -} - -void ub_task(void) -{ - if (last_rxb) { - printf("Last rx char was: <%c>\n", last_rxb); - last_rxb = 0; - } else { - printf("enter a character!\n"); - } -} - -void ub_irq_handler(void) -{ - if (usart_get_flag(ub->uart, USART_FLAG_RXNE)) { - last_rxb = usart_recv(ub->uart); - } -} diff --git a/tests/uart-basic/uart-basic.h b/tests/uart-basic/uart-basic.h deleted file mode 100644 index 8e3b8f6..0000000 --- a/tests/uart-basic/uart-basic.h +++ /dev/null @@ -1,44 +0,0 @@ -/* - * Karl Palsson Oct 2017 - * Considered to be available under your choice of: - * BSD2 clause, Apache2, MIT, X11 or ISC licenses - */ - -#pragma once - -#include -#include - -struct ub_hw { - /** usart itself, eg USART2 */ - uint32_t uart; - /** RCC_xxx flag for this usart, eg RCC_USART2 */ - uint32_t uart_rcc; - /** eg NVIC_USART2_IRQ */ - uint32_t uart_nvic; -}; - -#ifdef __cplusplus -extern "C" { -#endif - -/** - * Initialise the uart itself. - * gpios are required to have been already configured as needed - * @param ub - */ -void ub_init(struct ub_hw *ub); - -/** - * Call this, it will "do stuff" - */ -void ub_task(void); - -/** - * Call this from your board irq handler, it will "do the right thing" - */ -void ub_irq_handler(void); - -#ifdef __cplusplus -} -#endif -- cgit