From 6df66b77ba5b27bce5630694742f2dac57b8d3eb Mon Sep 17 00:00:00 2001 From: jaseg Date: Tue, 17 Jul 2018 15:43:26 +0200 Subject: Isolate usb-serial-rs485 tree --- tests/spi-master/main-host-stm32l1-generic.c | 114 --------------------------- 1 file changed, 114 deletions(-) delete mode 100644 tests/spi-master/main-host-stm32l1-generic.c (limited to 'tests/spi-master/main-host-stm32l1-generic.c') diff --git a/tests/spi-master/main-host-stm32l1-generic.c b/tests/spi-master/main-host-stm32l1-generic.c deleted file mode 100644 index fa40ba1..0000000 --- a/tests/spi-master/main-host-stm32l1-generic.c +++ /dev/null @@ -1,114 +0,0 @@ -/* - * March 2017 Karl Palsson - */ - -#include -#include -#include -#include -#include -#include -#include - -#include "trace.h" - -#include "hw.h" - -struct hw_detail hw_details = { - .periph = SPI2, - .periph_rcc = RCC_SPI2, - .periph_rst = RST_SPI2, - .pins = GPIO13| GPIO14 | GPIO15, /* SPI pins for setting AF with */ - .port = GPIOB, - .port_rcc = RCC_GPIOB, - .trigger_rcc = RCC_GPIOB, - .trigger_port = GPIOB, - .trigger_pin = GPIO9, -}; - - -/* provided in board files please*/ -/** - * Setup any gpios or anything hardware specific. - * Should _only_ be things that can't be done in shared init() - */ -static void hw_init(void) -{ - /* trigger pin gpio */ - rcc_periph_clock_enable(hw_details.trigger_rcc); - gpio_mode_setup(hw_details.trigger_port, GPIO_MODE_OUTPUT, GPIO_PUPD_NONE, hw_details.trigger_pin); - - /* spi control lines */ - rcc_periph_clock_enable(hw_details.port_rcc); - gpio_mode_setup(hw_details.port, GPIO_MODE_AF, GPIO_PUPD_NONE, hw_details.pins); - gpio_set_output_options(hw_details.port, GPIO_OTYPE_PP, GPIO_OSPEED_10MHZ, hw_details.pins); - gpio_set_af(hw_details.port, GPIO_AF5, hw_details.pins); -} - -static void test_init(void) -{ - /* Setup SPI parameters. */ - rcc_periph_clock_enable(hw_details.periph_rcc); - /* mostly, this is just "write 0 to cr1" */ - spi_set_slave_mode(hw_details.periph); - spi_send_msb_first(hw_details.periph); - spi_set_dff_8bit(hw_details.periph); - spi_set_clock_phase_0(hw_details.periph); - spi_set_clock_polarity_0(hw_details.periph); - spi_set_frf_motorola(hw_details.periph); - - /* we're a spi slave, use a CS pin */ - spi_disable_software_slave_management(hw_details.periph); - SPI_CR2(hw_details.periph) &= ~SPI_CR2_SSOE; - - /* Finally enable the SPI. */ - spi_enable(hw_details.periph); -} - -static void test_task(void) { - static int i = 0; - uint32_t spi = hw_details.periph; - if (SPI_SR(spi) & SPI_SR_TXE) { - /* ready to load next data in */ - SPI_DR(spi) = i++; - } - - if (SPI_SR(spi) & SPI_SR_RXNE) { - uint8_t data = SPI_DR(spi); - trace_send8(2, data); - } -} - - -static void setup(void) -{ - printf("hi guys!\n"); - hw_init(); - test_init(); -} - - -int main(void) -{ - const struct rcc_clock_scale myclock = { - .pll_source = RCC_CFGR_PLLSRC_HSE_CLK, - .pll_mul = RCC_CFGR_PLLMUL_MUL4, - .pll_div = RCC_CFGR_PLLDIV_DIV2, - .hpre = RCC_CFGR_HPRE_SYSCLK_NODIV, - .ppre1 = RCC_CFGR_PPRE1_HCLK_NODIV, - .ppre2 = RCC_CFGR_PPRE2_HCLK_NODIV, - .voltage_scale = PWR_SCALE1, - .flash_waitstates = 1, - .ahb_frequency = 32e6, - .apb1_frequency = 32e6, - .apb2_frequency = 32e6, - }; - int i, j; - rcc_clock_setup_pll(&myclock); - setup(); - - while (1) { - test_task(); - } - return 0; -} -- cgit