From 8b484ba88e16ec8a01482d94f27407966cecdaea Mon Sep 17 00:00:00 2001
From: Karl Palsson <karlp@tweak.net.au>
Date: Tue, 27 Sep 2016 22:23:57 +0000
Subject: oocd: move stm32f1 config file to common

---
 openocd/openocd.stm32f103-generic.cfg | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)
 create mode 100644 openocd/openocd.stm32f103-generic.cfg

(limited to 'openocd')

diff --git a/openocd/openocd.stm32f103-generic.cfg b/openocd/openocd.stm32f103-generic.cfg
new file mode 100644
index 0000000..f2da08c
--- /dev/null
+++ b/openocd/openocd.stm32f103-generic.cfg
@@ -0,0 +1,17 @@
+# Unfortunately, with no f103 disco, we're currently
+# using a separate disco board
+source [find interface/stlink-v2.cfg]
+set WORKAREASIZE 0x2000
+source [find target/stm32f1x.cfg]
+
+# Serial of my l1 disco used as stlink here.
+#hla_serial "S?l\x06H?WQ%\x10\x18?"
+# if f4 disco
+hla_serial "W?k\x06IgHV0H\x10?"
+
+tpiu config internal swodump.stm32f103-generic.log uart off 72000000
+
+# Uncomment to reset on connect, for grabbing under WFI et al
+reset_config srst_only srst_nogate
+# reset_config srst_only srst_nogate connect_assert_srst
+
-- 
cgit