1 files changed, 0 insertions, 82 deletions
diff --git a/tests/usb-serial-rs485/usb_cdcacm-arch.c b/tests/usb-serial-rs485/usb_cdcacm-arch.c
deleted file mode 100644
index e868861..0000000
--- a/tests/usb-serial-rs485/usb_cdcacm-arch.c
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * This file is part of the libopencm3 project.
- *
- * Copyright (C) 2014 Karl Palsson <karlp@tweak.net.au>
- *
- * This library is free software: you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with this library.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <libopencm3/cm3/nvic.h>
-#include <libopencm3/stm32/dma.h>
-#include <libopencm3/stm32/gpio.h>
-#include <libopencm3/stm32/rcc.h>
-#include <libopencm3/stm32/usart.h>
-
-#include "usb_cdcacm.h"
-#include "syscfg.h"
-#include "ringb.h"
-
-
-
-int glue_set_line_coding_cb(uint32_t baud, uint8_t databits,
-	enum usb_cdc_line_coding_bParityType cdc_parity,
-	enum usb_cdc_line_coding_bCharFormat cdc_stopbits)
-{
-	int uart_parity;
-	int uart_stopbits;
-
-	if (databits < 8 || databits > 9) {
-		return 0;
-	}
-
-	/* Be careful here, ST counts parity as a data bit */
-	switch (cdc_parity) {
-	case USB_CDC_NO_PARITY:
-		uart_parity = USART_PARITY_NONE;
-		break;
-	case USB_CDC_ODD_PARITY:
-		uart_parity = USART_PARITY_ODD;
-		databits++;
-		break;
-	case USB_CDC_EVEN_PARITY:
-		uart_parity = USART_PARITY_EVEN;
-		databits++;
-		break;
-	default:
-		return 0;
-	}
-
-	switch (cdc_stopbits) {
-	case USB_CDC_1_STOP_BITS:
-		uart_stopbits = USART_STOPBITS_1;
-		break;
-	case USB_CDC_2_STOP_BITS:
-		uart_stopbits = USART_STOPBITS_2;
-		break;
-	default:
-		return 0;
-	}
-
-	/* Disable the UART while we mess with its settings */
-	usart_disable(USART2);
-	/* Set communication parameters */
-	usart_set_baudrate(USART2, baud);
-	usart_set_databits(USART2, databits);
-	usart_set_parity(USART2, uart_parity);
-	usart_set_stopbits(USART2, uart_stopbits);
-	/* Back to work. */
-	usart_enable(USART2);
-
-	return 1;
-}