summaryrefslogtreecommitdiff
path: root/tests/usb-serial-rs485/README
diff options
context:
space:
mode:
Diffstat (limited to 'tests/usb-serial-rs485/README')
-rw-r--r--tests/usb-serial-rs485/README33
1 files changed, 0 insertions, 33 deletions
diff --git a/tests/usb-serial-rs485/README b/tests/usb-serial-rs485/README
deleted file mode 100644
index 0e5b2cd..0000000
--- a/tests/usb-serial-rs485/README
+++ /dev/null
@@ -1,33 +0,0 @@
-------------------------------------------------------------------------------
-README
-------------------------------------------------------------------------------
-
-current status:
-f1: frootloop3 gets corrupt data in rx path, _after_ serial rx,
-but the usb in packets (wireshark) show the corruption. (LA on serial lines is clean)
-f4: frootloop3 tests clean
-=> suspect libopecm3 usb bug?
-
-frootloop3: github.com/karlp/frootloop3
-
-
-
-This implements a USB CDC-ACM device, connected to USART2 (PA2-tx/PA3-rx)
-An interrupt driven tx ring buffer is used for usb->serial, and a similar
-interrupt driven rx ring buffer is used for serial->usb.
-Baud rates from 2400-460800 are tested with zmodem transfers in both directions.
-
-Parity not yet finished, and baudrates below 1200 need fiddling with clock prescalers.
-When it's finished, rs485 support should be available via the TC interrupt.
-
-A GPIO is toggled around USART transmissions to control an RS485 line
-transceiver, following ST's app note. The RS485 driver enable line is,
-by default, just the onboard red LEDs.
-
-The orange/blue LEDs indicate tx/rx activity, but especially for the rx line,
-you won't really see it without heavy data rates.
-
-This example is heavily based on the existing usb_cdcacm and usart demos.
-
-
-KARL - check https://github.com/dhylands/libopencm3-usb-serial/blob/master/usb.c to see if it passes the same tests or not