1 files changed, 0 insertions, 78 deletions
diff --git a/tests/uart-basic/main-dut-stm32l073rz.c b/tests/uart-basic/main-dut-stm32l073rz.c
deleted file mode 100644
index 17a68da..0000000
--- a/tests/uart-basic/main-dut-stm32l073rz.c
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * Oct 2017 Karl Palsson <karlp@tweak.net.au>
- */
-
-#include <errno.h>
-#include <stdio.h>
-#include <unistd.h>
-#include <libopencm3/cm3/nvic.h>
-#include <libopencm3/stm32/crs.h>
-#include <libopencm3/stm32/gpio.h>
-#include <libopencm3/stm32/rcc.h>
-#include <libopencm3/stm32/syscfg.h>
-#include <libopencm3/stm32/usart.h>
-
-#include "uart-basic.h"
-
-#define LED_NUC_RCC RCC_GPIOA
-#define LED_NUC_PORT GPIOA
-#define LED_NUC_PIN GPIO5
-
-void usart2_isr(void)
-{
-	ub_irq_handler();
-}
-
-static void setup_rcc_hack(void)
-{
-	/* FIXME L0 doesn't have rcc setup helpers (yet) */
-	rcc_osc_on(RCC_HSI16);
-	rcc_wait_for_osc_ready(RCC_HSI16);
-	rcc_set_sysclk_source(RCC_HSI16);
-
-	/* ok, we manually poked around, let the lib know */
-	rcc_apb1_frequency = rcc_apb2_frequency = 16e6;
-}
-
-static void board_init(void)
-{
-	rcc_periph_clock_enable(RCC_GPIOA);
-	gpio_mode_setup(GPIOA, GPIO_MODE_AF, GPIO_PUPD_NONE, GPIO2 | GPIO3);
-	/* usart is AF4 */
-	gpio_set_af(GPIOA, GPIO_AF4, GPIO2 | GPIO3);
-}
-
-int main(void)
-{
-	int i;
-	int j = 0;
-	setup_rcc_hack();
-	board_init();
-	struct ub_hw ub = {
-		.uart = USART2,
-		.uart_nvic = NVIC_USART2_IRQ,
-		.uart_rcc = RCC_USART2,
-	};
-	ub_init(&ub);
-	printf("hi guys!\n");
-	/* green led for ticking */
-	rcc_periph_clock_enable(LED_NUC_RCC);
-	gpio_mode_setup(LED_NUC_PORT, GPIO_MODE_OUTPUT, GPIO_PUPD_NONE,
-		LED_NUC_PIN);
-
-
-	while (1) {
-		gpio_toggle(LED_NUC_PORT, LED_NUC_PIN);
-
-		for (i = 0; i < 0x40000; i++) { /* Wait a bit. */
-			__asm__("NOP");
-		}
-		ub_task();
-		gpio_toggle(LED_NUC_PORT, LED_NUC_PIN);
-		for (i = 0; i < 0x40000; i++) { /* Wait a bit. */
-			__asm__("NOP");
-		}
-	}
-
-	return 0;
-}